Age | Commit message (Collapse) | Author | Files | Lines |
|
The upstream version of AGL boots Linux in EL1. This mode is not
privileged enough to put in place the correct configuration of
an hypervisor (e.g., KVM).
This patch leverages the ATF rcar platform configuration variables to
boot the Linux kernel in EL2, instead of EL1, allowing Linux-based
hypervisors such as KVM to configure all the necessary stubs to
properly run virtual machines.
This patch has been successfully tested with ATF, KVM and AGL rootfs
on the Renesas R-Car M3.
Changelog:
- Added arm-trusted-firmware patch, which makes this work easy
to be tested by the community
- This patch version does not contain Linux kernel modifications.
In fact, these resulted not necessary with the proposed ATF patch
and a recent kernel (higher than 4.6)
Bug-AGL: SPEC-497
Bug-AGL: SPEC-1571
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I8d20e36a09be1dba35b10193643ea00e4f388e95
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Bug-AGL: SPEC-1571
Change-Id: Ieefd423b79faa220531a887ff167227044ab6064
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
* AGL doesn't use /usr/local for system files.
All the Renesas libraries and binaries will be installed in /usr
instead of /usr/local.
Bug-AGL: SPEC-1571
Change-Id: Ibc40df5d492517773bf89e4e0f117a02d22d90cd
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
With SOTA feature ramdisk is used as a rootfs,
so ramdisk parameter should be enabled in kernel.
Change-Id: Ie9e8bc2897a3886da31681689b5b59f04e1be602
Signed-off-by: Eugene Smirnov <eu.smirnoff@gmail.com>
|
|
virtual/gpsd-conf is a runtime dependency in packagegroup-agl-core-navigation.
So, PREFERRED_RPROVIDER must be used in place of PREFERRED_PROVIDER
Bug-AGL: SPEC-1861
Change-Id: I15b915c2e7a1410000f7527b13f3206242778bc0
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Reduce the screen resolution for Raspberry Pi from Full HD to
HD Ready (1280x720) to reduce the memory consumption and
improve the behaviour of the whole system. This change is
applied only for HDMI display on Raspberry Pi due to the
limited hardware resources.
Bug-AGL: SPEC-1745
Change-Id: Id2fb571b0822f8166086f5ad6a7fcf8ea25c933a
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
In releases based on Yocto/OE Rocko firmware files for bcm43430
and bcm43455 are provided by linux-firmware-raspbian. This fix
avoids duplication of firmware files for Raspberry Pi 3 Model B
and B+ while building agl-demo-platform-crosssdk.
Bug-AGL: SPEC-1729, SPEC-1652
Change-Id: Ic9e918f4ffd915b148530bb8e6bf9a6dc6a61c02
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
(cherry picked from commit 639fbf7907f90de114ecc176be2ff2dbb6a56434)
|
|
Use linux-firmware-raspbian packages for bcm43430 and bcm43455.
Bug-AGL: SPEC-1729, SPEC-1652
Change-Id: Ib634ee3351fa91d8d1704656f4a40d1b40cd05e3
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
(cherry picked from commit 6e7be8f6020c6925430e9c442c2d20bbf4bc9fc2)
|
|
as the ordinary m3 build.
Change-Id: If07a26f1cb253b9863ea658e6cd122450f03a38b
Bug-AGL: SPEC-1640
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The way that the PM firmware for these devices is built takes very
specific steps to only get the cross-compiler provided by OE and almost
nothing else. Unfortunately when we build with the security_flags.inc
file in our distro this changes some of the default behavior of the
compiler and in turn we need to make sure to disable this and go back to
the default behavior.
Change-Id: I1ab8e20f77d7ab6a3c786437e9a9422b24f0e159
Bug-AGL: SPEC-1341
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
At www.imagemagick.org/download, tarball archives of old patchsets are deleted
when a new patchset is created. This causes error when do_fetch().
Offical source repository is in github, so SRC_URI can be set to pull from there.
Unfortunately, github repository has tags only after 6.9.5-4.
Therefore, updated to the latest stable, 6.9.10-10.
For meta-agl/meta-agl-demo, ImageMagick is not mandatory component,
but optee inside Renesas BSP requires it (and python-wand).
Upstream optee already remove these dependency, so this is
just work-around until meta-renesas-rcar-gen3 will be updated.
Change-Id: I1767e2d7588a35d75009843312c484d3d63553ae
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
This changeset adds the necessary tepmlates to build the qemu
targets for ARM 32bit and 64bit.
The MACHINE names are 'qemuarm' and 'qemuarm64'.
As the compiler flags for qemuarm in Yocto are using the equivalent
of armv5te, we need to ship our own machine/qemuarm.conf with our
default tuning for armv7-a (YP name armv7ve), and overrides to build
a v7 kernel and use a v7 capable QEMU machine. For qemuarm64, some
additional kernel configuration is enabled to allow building and
loading of the MOST drivers.
Bug-AGL: SPEC-756
Change-Id: I0a688a1d61a75f1287902fc2733a8a54b0485a34
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Bug-AGL: SPEC-490
This reverts commit d88997d1d16897abb83a161c215cbec25d9b5e0f.
Change-Id: I7c7a989fb1bf1df1de3c0557792ea4b013fec709
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Add binary blobs for brcmfmac43455 to enable WiFi for the new
Raspberry Pi 3 Model 3 B+. At the moment meta-raspberrypi
provides this for latest releases but not for Rocko. This fix
should remain in meta-agl until AGL moves to sumo or until we
backport the required changes to meta-raspberrypi branch rocko.
Bug-AGL: SPEC-1652
Change-Id: I644938ac3799b0e831f022fff9b2bc85aa8fd27c
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
New Link:
* https://www.renesas.com/us/en/solutions/automotive/rcar-download/rcar-demoboard-2.html
Change-Id: I4451bbb8ff151c0ab5af0163e667a170e2a078cb
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
"panel-location" configuration is old. The current weston
uses panel-position.
Change-Id: Iae50bc72c4ece64effe0b9b5f57e8d5e76057478
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
As it turns out, the driver uses cma and the fixed memory split is only needed at boot time
before cma takes over or for the old driver.
Thus we can safely reduce it down again as it does not help with the
limited cma memory at all.
Change-Id: Ibd5da5da931d02777e8d69543ce44e6b536402b1
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Though R-Car has V4l2 renderer but it is special case.
Then it makes no sence to add v4l2 configration into
weston.ini file for AGL.
Change-Id: Id91be4ce9bcca03126d01e50c587e8d945464f61
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
Revert "linux-ti-staging moved to 4.14"
This reverts commit 9e0ff1e9829f3cac0d7a4b90c5456164b8a01b96.
Change-Id: I00dc5ce4d249b28b7f9d4e8559aa78a37edbbea3
|
|
Kernel 4.14 does not ship the dtb anymore, we pin on 4.9 for now.
Change-Id: I96228b014dc09efbc7379383b2795a8d4eadf022
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
latest sound card name in R-Car Starter Kit is changed "ak4613"
from rsnddai0ak4613h, that is described in device tree.
Therefore, asound.state file should be updated.
Change-Id: I35dc0521da3061eedfa17ba2e28e68ab36353087
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
Change-Id: I3265c71669124c3ee94be86993d45604356c5735
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Remove the 4.9 patch queue.
Change-Id: Iadd7d4b74085f21f9e487173e9f69ed8969c114b
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This gives the gfx core some more head room.
Change-Id: Ibff2aa3ed7fac1a3a199fa738cb47982ac56a298
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Enable weston to use systemd notify to reduce causes of
race condition between window manager and homescreen.
Bug-AGL: SPEC-1471
Change-Id: I6431b5d52f38b982f6691b2961938664cc4f0544
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Backport pn533_usb incorect stack use from linux-next kernel
NOTE: this kernel is tracking LTS so at some point it will need to be reverted
Bug-AGL: SPEC-1544
Change-Id: I90fd3e0339dfdb148eb01b6ef836353bc2ac6a43
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
* without this options the kernel command "make oldconfig"
can deactivate SND_ALOOP
Change-Id: I132a1109da81aeb470a845e70f2084f57ad47a95
BUG-AGL: SPEC-1591
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Too early. Need to wait for
https://gerrit.automotivelinux.org/gerrit/#/c/15127/
This reverts commit 57fa6f2599942b87af20ae8791eeb40bec5569ef.
Change-Id: Ie6eabc56c3b5f4af77c944b5eb15e0d36f719756
|
|
Thus remove the linux-agl-4.9.inc.
Change-Id: I4d3172a58f4bf3e44201b50c183294356d52a3b0
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Backport pn533_usb incorect stack use from linux-next kernel
Bug-AGL: SPEC-1544
Change-Id: Idc3614f0aedc47a6d69523bf4b8b817b4ed62f55
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Add various NFC options to kernel configuration
Bug-AGL: SPEC-1554
Change-Id: I94c985421a3b78466d44140ebadcec5c50166212
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Thus meta-agl-bsp/meta-agl-profile-graphical needs to be meta-agl-bsp/meta-aglprofilegraphical
Bug-AGL: SPEC-1552
Change-Id: I9a504a3e6c090ca8a8dea108a11c0394c0a27b14
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Fix the DT node addresses to match the reg property addresses,
which were verified to match the TRM
Change-Id: I1ec1d52b48aa2af7d74779bf0eb6f30bc7a4a6cc
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
|
|
pn533_usb based NFC devices wouldn't work on recent x86 builds, and
requires a patchset from the upstream kernel
Bug-AGL: SPEC-1553
Change-Id: I8113cccd1afc027b80495272bfa8aca42aec7691
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Add the C_CAN and the C_CAN_PLATFORM modules to be built as a kernel modules,
those modules supports the Bosch D_CAN and C_CAN peripheral IPs
Change-Id: If5657ba12bb5fc5c2ad1e06554a89255fddd4745
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
|
|
Modify the DTS file, to add the proper pinmux for the DCAN2 and enable it
Change-Id: I21d233eab71d062484f322e8dd0f16df34f6fe76
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
|
|
4A requires some specific options in the linux kernel, like
CONFIG_SND_ALOOP for softmixer. This patch adds a config fragment
to the default linux kernel recipe.
This is a copy of what has been done on EE:
* https://gerrit.automotivelinux.org/gerrit/#/c/14303/
* https://gerrit.automotivelinux.org/gerrit/#/c/14561/
Change-Id: I5f8879f4ac1b3685f6d801b385d9b0ce9f17f9c7
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
* For the Renesas Gen3 extention board Kingfisher,
we must specify the GPS device for gpsd service.
* Create a new machine type kingfisher.
Bug-AGL: SPEC-1538
Change-Id: If6b7e49f6a006218e57c58e15855e0d65eb849cd
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Tested with agl-demo-platform image on:
* M3+KF
* H3+KF
Test results:
| Component | Status |
|---------------------------------------------------------|------------|
| Wifi (U52) | ok |
| BT HCI (U52) | ok |
| BT Audio(U52) | not tested |
| USB2.0(host)(CN13) | not tested |
| USB2.0(func)(CN13) | not tested |
| USB2.0(on-the-go)(CN13) | not tested |
| USB3.0(CN2) | fail |
| Multichan Audio(SSI3,4) hphone(CN 32,33) lineout(CN12) | not tested |
| CSI : Expansion Board (CN10) | not tested |
| CSI : Expansion Board (CN11) | not tested |
| CSI : Raspberry Pi camera(CN48) | not tested |
| Video Input CMOS camera(CN29) | not tested |
| HDMI out(CN49) | ok |
| LVDS out(CN7) | not tested |
| Radio (CN42, 43) | ok |
| Gyro, Accel | ok |
| GPS (CN16) | ok |
| Serial (CN4) | not tested |
| CAN(CN17, 18) | ok |
| SD (CN47) | fail |
| Mini PCIe(CN15) | not tested |
| M.2 key M (CN5) | not tested |
| MOST (CN22) | not tested |
Change-Id: I0779cd6440bf1e8fc958f127aee3c3979da603bb
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
When concatenating kernel config fragments, if a fragment file doesn't
end with a carriage return, then the last config option of the
fragment and the first one of the next fragment are on the same line
in the result file. This leads to misconfiguration because some
options are not taken into account.
This commit includes a patch that will add a \n in the result file
after each fragment.
Bug-AGL: SPEC-1475
Change-Id: I52d13b42909f56f4608860af865a80d0d9b2579e
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
This is the last larger commit in this series and deals with the graphical part.
We introduce the graphical profiles:
- meta-agl-profile-graphical
-- meta-agl-profile-graphical-html5
-- meta-agl-profile-graphical-qt5
Notable changes:
- weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images.
- new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds
- new image/sdk: agl-image-minimal-crosssdk
- agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical.
- The wayland-ivi-extension moved to the agl-demo-platform.
- The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now.
- added and massaged the agl-features.
- found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g)
Todo:
- we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages.
For further details, see meta-agl/docs/profiles.md.
v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES.
v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel)
v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane)
v5: fix missing packagegroup inclusion
v6: explicitely put profile-graphical-qt5 on-top of profile-graphical
v7: re-add 'procps' when agl-devel feature is on
Bug-AGL: SPEC-145
Change-Id: I24cdcd1118932758d0c55d333338238f2a770877
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
* A missing carriage return at the end of a cfg
will break the kernel .config
Bug-AGL: SPEC-1475
EE-MUST-FIX
Change-Id: Ie0bc472153ae73b41c495161f83acba57d812b9a
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
|
|
|
|
This bbappend no longer is needed because related bb
has been removed by below commit.
http://git.yoctoproject.org/cgit/cgit.cgi/meta-qcom/commit/?id=267fa80fea2d3
Change-Id: I3d7943c2a2048078b210adbadf30a3bdb59206a9
Signed-off-by: Yuya Ono <Ono.Yuya@ap.MitsubishiElectric.co.jp>
|
|
Update 96boards-tools recipe for dragonboard-410c.
This recipe is ported from meta-96boards layer(rocko).
https://github.com/96boards/meta-96boards/
Change-Id: I4a56bddabebfde48ee2a25e180d6ed452b5e0e38
Signed-off-by: Yuya Ono <Ono.Yuya@ap.MitsubishiElectric.co.jp>
|
|
To extent the demonstrator we need to support an I2C adaptor and RGB LED.
Change-Id: I1816ee9a7acf4699d1639b4954422df9ca8f452e
Signed-off-by: Yordan Dimitrov <y.dimitrov.14@gmail.com>
|
|
This fix is needed to unbreak the build due to a parsing error in the nogfx target (qt5 not enabled but bbappends present).
Change-Id: I9da2a5854849c147c7917c75b5783b755b9130f1
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
- The PACKAGECONFIG value "experimental" was remove recently
(Upgrade Bluez version 5.43 -> 5.44).
(From poky): feacb428b055fd714eb1b15402023f4a726dce54
-PACKAGECONFIG[experimental] = "--enable-experimental,--disable-experimental,"
- So we can remove "experimental" feature to avoid yocto Warning.
Bug-AGL: SPEC-1398
Change-Id: Ibd96a788bd0c4e0d9bc6959012bbbf839d890e9d
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
|