summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp
AgeCommit message (Collapse)AuthorFilesLines
2019-06-09Merge "Fix rpi touchscreen support on master"Jan-Simon Moeller9-4/+1120
2019-06-07Fix : do_patch waring weston 6.0.0Harunobu Kurokawa1-5/+5
Backport weston patch to Fix do_patch warning. http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-graphics/wayland/weston/0001-make-error-portable.patch -- WARNING: weston-6.0.0-r0 do_patch: Some of the context lines in patches were ignored. This can lead to incorrectly applied patches. The context lines in the patches can be updated with devtool: devtool modify <recipe> devtool finish --force-patch-refresh <recipe> <layer_path> Then the updated patches and the source tree (in devtool's workspace) should be reviewed to make sure the patches apply in the correct place and don't introduce duplicate lines (which can, and does happen when some of the context is ignored). Further information: http://lists.openembedded.org/pipermail/openembedded-core/2018-March/148675.html https://bugzilla.yoctoproject.org/show_bug.cgi?id=10450 Details: Applying patch 0001-make-error-portable.patch patching file configure.ac Hunk #1 succeeded at 126 with fuzz 2 (offset 17 lines). patching file libweston/weston-error.h patching file libweston/weston-launch.c Now at patch 0001-make-error-portable.patch Bug-AGL: SPEC-2499 Change-Id: If80c4e71be1f58362c78fec9ca6c2ca29d224c39 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-06-06Pin SRCREV used by ti-sgx-ddk-kmPaul Barker1-0/+1
The commit of the omap5-sgx-ddk-linux git repository used by the ti-sgx-ddk-km recipe is changed by recent commits to meta-ti to introduce generic support for armel (soft-float) targets. This conflicts with the existing patch in meta-agl which adds support for our toolchain. The simplest fix is to pin to a working commit by setting SRCREV to the previous commit on the same branch. This is the same commit that is currently used and so it won't have any effect until the meta-ti layer itself is updated. For reference, the commit in question can be seen here: https://git.ti.com/graphics/omap5-sgx-ddk-linux/commit/dbdbd9309a58ee723fc827ef5fd45c28347cf61f Bug-AGL: SPEC-2490 Change-Id: I2924cdadd697680567a9378eb3242f8dd526a429 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-06-06[RCAR] Remove unnecessary device tree fileHarunobu Kurokawa1-0/+20
Bug-AGL: SPEC-2486 Change-Id: Ic0cf9128d1630ede1af8024e3bd5258b7529b683 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-06-05Fix rpi touchscreen support on masterJan-Simon Möller9-4/+1120
We seem to miss a few bits that changed between kernel 4.9 and kernel 4.14 regarding the 7'' touchscreen. One addition is the rpi-backlight.dtbo which we also need to use in our create-combined-dtb recipe for CI use. We also seem to require https://github.com/raspberrypi/linux/pull/2693#issue-217750943 . Thanks to Scott Murray for the help digging through this. v2 and v3: add devicetree changes v4 and v5: fix name of dtbo v6: move append to machine include - we need it as a global var v7: add to config.txt for sdcard boot case Bug-AGL: SPEC-2465 Change-Id: I2bb3cd974b74a790292e1f36ffdca034928e0bca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-29Add weston 6.0.0 for WM and HS rewriteJan-Simon Möller9-1/+432
As requested for the WM and HS rewrite. Tested on m3, minnow, qemux86-64, rpi3. (cherry picked from commit fda5568cf4bc268088c9d1f925007d682bb7ef5d) Multiple commits to applied at once. Bug-AGL: SPEC-2444 Change-Id: I3f74b40213d4c4a65400a53fe9c57f52fe3b6096 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-28Merge "SPEC-2376: Add virtio configs for QEMU arm/arm64 kernels"Jan-Simon Moeller2-0/+5
2019-05-28SPEC-2376: Add virtio configs for QEMU arm/arm64 kernelsCorentin Labbe2-0/+5
QEMU arm/arm64 need some VIRTIO configs for having storage for rootfs. Bug-AGL: SPEC-2376 Change-Id: Ia4b53092418b9f5e4040b8dafc58262a98bcac46 Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
2019-05-24On master enable the CONFIG_USB_NET_SMSC75XX driverbuild.automotivelinux.org1-3/+3
This is for the 3b+ board. Change-Id: I428a12b836c1f7c3f01b29602e666ae28efd647f Bug-AGL: SPEC-2456 Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
2019-05-24Merge "setup_mm_packages.sh: Use GFX 3.19 binaries instead of 3.15"Stéphane Desneux1-0/+48
2019-05-24setup_mm_packages.sh: Use GFX 3.19 binaries instead of 3.15Pierre MARZIN1-0/+48
Renesas BSP 3.19 is not actually available. But the graphics binaries are. So this patch get the 3.19 GFX binaries to patch the 3.15 GFX binaries ones. To achieve that, the following zip is needed: "R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-weston5-20190516.zip" (Note: the name of the zip can change). By this way, BSP 3.15 of Renesas will be used with the 3.19 GFX binaries. This solves the graphic issue of the M3ULCB and H3ULCB boards. This hotfix has been tested on m3ulcb with success. Warning: This patch has to be revert when the BSP of Renesas will be updated to 3.19 (at least). Bug-AGL: SPEC-2253 Change-Id: Ieaab76fb08618f9994c3ff5969d9a361d08b65d2 Signed-off-by: Pierre MARZIN <pierre.marzin@iot.bzh>
2019-05-21Remove the 64bit rpi3 targetJan-Simon Möller1-25/+0
As memory is already low on 32-bit, the 64-bit target is deprecated for now. There is no benefit in maintaining two targets atm. Change-Id: I29d755ff70693280dcc1e4ce996bd4c2894bacfb Bug-AGL: SPEC-2323 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-14meta-agl-bsp: meta-sancloud: weston-ini-conf: Use 720p resolution where possiblePaul Barker1-0/+3
The BBE is has fairly limited CPU and Graphics power so everything is sluggish at 1080p. Things work much better at 720p. However, if the 'hdmi-a-1-270.cfg' file has been removed (for example, when building the cluster demo) then don't try to modify it. Bug-AGL: SPEC-2409 Change-Id: I614bf6a7d65f5d51b6f9b1b776851562151fe2f6 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14meta-agl-bsp: meta-sancloud: weston-ini-conf: Set correct gbm-formatPaul Barker1-0/+3
The default gbm-format needs to be changed on the BeagleBone Enhanced due to a hardware errata on the AM335x SoC. For further details see the following section of the TI wiki: http://processors.wiki.ti.com/index.php/Processor_Linux_SDK_Graphics_and_Display#AM3_Beagle_Bone_Black_Board_Configuration The TI documentation recommends further changes to powervr.ini and qt_env.sh. The change to powervr.ini is already applied in the meta-sancloud layer and the change to qt_env.sh was found not to be needed. Bug-AGL: SPEC-2409 Change-Id: Iec91ab939b13bd4f936e64681d45931dafb8ee91 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14meta-agl-bsp: meta-sancloud: linux-bbe: Reserve 256MB for CMAPaul Barker2-0/+5
The tilcdc DRM driver needs more CMA memory available than we reserve by default in order to give a working GUI in AGL guppy. Bug-AGL: SPEC-2409 Change-Id: I0e09773c37133db86520fc15ed0ad11e80382b2e Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14meta-agl-bsp: meta-sancloud: linux-bbe: Apply AGL kernel changesPaul Barker1-0/+1
This is the first step towards integration of the Sancloud BeagleBone Enhanced (BBE) BSP with AGL. When building the BBE kernel for AGL we need to pick up the correct .inc files. Bug-AGL: SPEC-2409 Change-Id: I05fe3094e75e873984df57f9610c704dd3c10e29 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14meta-agl-bsp: meta-ti: weston-ini-conf: Apply only to dra7xx-evmPaul Barker1-2/+2
The git history shows that the weston-ini-conf changes in meta-agl-bsp/meta-ti were added to support the dra7xx-evm. These changes should not be applied for other machines which use the meta-ti layer such as the beaglebone and bbe. Bug-AGL: SPEC-2409 Change-Id: Ia21425bfda3ec03ef51371c14fcbca94a5067a7c Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-04-29meta-intel: Support the upsquare boardCorentin Labbe4-0/+16
This patch adds the necessary CONFIG for booting the upsquare board. The upsquare have an R8169 ethernet card and need it built-in for the kernel DHCP autoconf to work. The upsquare need some MFD_INTEL configs to boot. The meta-intel miss some CONFIG necessary for LAVA and NBD to works. Bug-AGL: SPEC-2075 Change-Id: Iad63e0f0b978bb75f8d8759ad353e7952b63a2ab Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
2019-04-29Merge "Add ARC HSDK board support"Jan-Simon Moeller2-0/+6
2019-04-29Merge "Remove inactive devices"Jan-Simon Moeller4-110/+0
2019-04-29Remove inactive devicesJan-Simon Möller4-110/+0
Remove device which are EOL, unused or do not work. As discussed during the SAT call: - rpi2 : -- will not work for IVI due to the CPU -- use the rpi3 instead - joule : -- EOL for ~1y, no longer available for purchase, no way to test. i.MX6: Remove currently unmaintaned boards. Can re-add on request. - imx6qsabrelite: -- replaced with uprev'd imx6qsabreauto -> imx6qdlsabreauto - nitrogen6x: -- no thud branch upstream. Bug-AGL: SPEC-2323 Change-Id: I28a70dcb7b48b6a9396d3003cc34d4c1f6570eca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-26Add ARC HSDK board supportEvgeniy Didin2-0/+6
This changeset adds the necessary files to build image for Synopsys ARC HS Development Kit (HSDK). Most of necessary tunnings are stored in meta-synopys layer. Synopsys DesignWare HSDK (which stands for ARC HS Development Kit) is the latest and greatest development platform that sports quad-core ARC HS38 in real silicon. Most noticeable features of the board are: * Quad-core ARC HS38 CPU running at 1GHz * 4Gb of DDR * Built-in Vivante GPU * Built-in Wi-Fi/Bluetooth module Peripherals: * [micro] SD-card slot * 2 USB 2.0 ports * 1Gbit Ethernet port * Built-in Digilent JTAG probe * Serial port accessible via micro-USB port New feature: SPEC-2346 Change-Id: I8772ee51cc3db9f6549da2d6a5ea2d116586cde6 Signed-off-by: Evgeniy Didin <didin@synopsys.com>
2019-04-23Fix imx6qdlsabreauto machine configurationBechir Mghirbi9-488/+26
The imx6qsabreauto target was falling behind and could not be build for GG-7.0. The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro. However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets. This patch makes the required changes to fix the imx6qsabreauto machine configuration: - removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro - updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer - deletes reference to packagegroup-fscl-* not required to build AGL - add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon' v2 (jsmoeller): moved board name to match MACHINE v3 (bechir.mghirbi): - remove wayland_2.0.0 as weston_4.0.0.imx is used. - use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - Add CFG80211 Kernel configuration Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-11Add rpi network drivers by defaultJan-Simon Möller2-0/+9
This is needed for network booting. Change-Id: Iecee73a3b0bf31c3c68bb4beea1f41d07c9b5ec5 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-05[RCAR] update required drivers to *-weston5-20190212Stephane Desneux1-2/+2
These are required for BSP 3.15.0 on thud (with Wayland 1.16/Weston 5.0) Bug-AGL: SPEC-1837 Change-Id: I11321915a1be9b858e0b9fef35820c211e0074b4 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2019-04-04Upgrade to thudScott Murray63-6422/+70
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-03-25[RCAR] Fixed missing definition about virtual/eglHarunobu Kurokawa1-1/+1
Sometimes, libepoxy has an error during do_configure. PREFERRED_PROVIDER_virtual/egl definition in agl_m3ulcb was changed to virtual-gles-user-module from libegl. To fix this missing dependency, add virtual/egl definition in virtual-gles-user-module. ------ checking for egl... no configure: error: Package requirements (egl) were not met: No package 'egl' found ------ Change-Id: Ia6915af2a8babbbd3353513cc2c115387f6e178c Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-03-15meta-agl-bsp: recipes-kernel: linux: Increase BLK_RAM sizeCorentin Labbe1-0/+1
For SPEC-2075, I tried to boot an upsquare using NBD and it fail with: [ 8.380343] EXT4-fs (ram0): bad geometry: block count 8492 exceeds size of device (4096 blocks) [ 8.390509] EXT4-fs (ram0): bad geometry: block count 8492 exceeds size of device (4096 blocks) For having a successfull boot, I needed to increase BLK_DEV_RAM_SIZE to a larger value (16384). Instead of increasing to only 16384, I use 65536 which is the value used in other meta-xxxx like meta-freescale. This patch increase BLK_DEV_RAM_SIZE to 65536. Signed-off-by: Corentin LABBE <clabbe@baylibre.com> Change-Id: I0792be1038d0bcd120c3c69c90cd6e1966c9b1ee
2019-03-12[RCAR] Fix patch on kernel dtsRonan Le Martret1-8/+12
* For RCAR BSP v3.15.0, we need to fix this patch Bug-AGL: SPEC-2185 Change-Id: Iadf40e6bfe964c3881d411cbdaab956ce524bc76 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-03-12[RCAR] Remove upstream patchRonan Le Martret2-146/+0
This patch is now upstream (RCAR BSP 3.15.0), so it useless to keep it in AGL. Bug-AGL: SPEC-2185 Change-Id: I10f1c99d4854c364960f310e4e12b385f6c55465 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-03-12[RCAR] Remove old recipes backportRonan Le Martret2-57/+0
linuxptp is now on version 1.8 and compatible the current RCAR BSP (v3.15.0) Bug-AGL: SPEC-2185 Change-Id: I10fa4e2339880ef786d0fef07ebf2864f1659187 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-03-12[RCAR] Remove old back portRonan Le Martret1-87/+0
Current version of imagemagick is 7.0.7 and do not need backport. Bug-AGL: SPEC-2185 Bug-AGL: SPEC-1687 Change-Id: Ie204c48e5907b4bb40418f9a0b10b0b1b35d5c77 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-03-12[RCAR] Remove old backportRonan Le Martret3-60/+0
python-wand is now useless Bug-AGL: SPEC-2185 Bug-AGL: SPEC-1687 Change-Id: I97d0871185017e88fcac31dcef70c1d28fe636c1 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-03-12[RCAR] Remove fix on bluez5Ronan Le Martret1-1/+0
This fix is now include cogent BSP (RCAR BSP v3.15.0). Bug-AGL: SPEC-2185 Change-Id: Ib8de25f269a9c3b953075d33afb6f9d399f1471d Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-03-12[RCAR] Update RCAR BSP v3.15.0 driverRonan Le Martret1-2/+2
Bug-AGL: SPEC-2185 Change-Id: I30f0ae0b760b540d41af7a0e7afafc9984d34b20 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-03-12[RCAR] Update u-boot for RCAR BSP v3.15.0Ronan Le Martret2-102/+0
- u-boot in RCAR BSP v1.15.0 has been updated to v2018.09 so we can remove some old fix. Bug-AGL: SPEC-2185 Change-Id: I1d40f0341edfdd0cedc5b1d58911bdc30677eeea Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-03-05Change opencv support max device number to 16zheng_wenlong2-0/+31
When using m3ulcb or h3ulcb with usb camera, the board already had 10 video devices, and opencv only support max device number is eight. Need change to 16 so rcar can use usb camera with opencv. [Patch Set 4] Change max device number to 16. Make this package specific to m3. [Patch Set 5] Make this patch generic not only for m3. Change-Id: Ice8b34f92addb8b8a4bcaf6db5491862a4545244 Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
2019-02-13meta-agl-bsp: recipes-kernel: linux: add CONFIG_CAN_MCBA_USB to can-bus.cfgMatt Ranostay1-0/+1
Add CONFIG_CAN_MCBA_USB to allow usage of Microchip CANbus analyzers Change-Id: I86d5726150373cb14630a95c7767fd13dd5d0924 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-02-05meta-agl-bsp: recipes-kernel: linux: add usbmodem.cfg fragmentMatt Ranostay2-0/+8
Change-Id: I4a064972e1ed98dbcda209889d8e75b849cc56a5 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-02-05meta-agl-bsp: recipes-kernel: linux: remove execute bit from usbaudio.cfgMatt Ranostay1-0/+0
Execute attribute on usbaudio.cfg is useless and should be removed. Change-Id: I0e7706a25c9668977a1104e25793d25b0f692f09 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-01-16Revert "Remove 4.9 patchqueue for new 4.14 kernel in meta-ti"Jan-Simon Moeller1-0/+1
Re-add the patchqueue for 4.9 . The 4.14 Kernel is missing the dtb for the screen. This reverts commit 6fc5ad52250e6dc63b40b17376668f40a016926e. Change-Id: I25f7650df642bb6c6e5fcb5cd0be525cc7938bcb
2019-01-16Revert "Remove patch in newer ti-staging kernel"Jan-Simon Moeller1-0/+1
The 4.14 kernel is missing the dtb of our screen. For now stay on 4.9 until the status is clear. This reverts commit 629062a55c41e8993761edf4a2a44400b72a6b91. Change-Id: Ibe4e87d1b81fff907bc35cacf10690b21fe45cb2
2019-01-15meta-agl-bsp: gen3: recipes-navigation: fix typo of gpsd-defaultsMatt Ranostay1-4/+4
gpsd-defaults was typo as gspd-defaults which causes the incorrect gpsd default settings on M3+KF Bug-AGL: SPEC-2111 Change-Id: I47a098893f214054a7cb687e1cf3a6897d077863 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2018-12-20kernel/4a: support more than 8 audio cardsStephane Desneux1-0/+2
When using Kingfisher + M3ULCB + MOST network devices, it's possible to reach the max number of statically allocated soundcards. This patch enables CONFIG_SND_DYNAMIC_MINORS which allows to declare more than 8 soundcards. Change-Id: Ibe0f75e00c343d7adfcdae0661e893fb39fc4169 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-12-20Support external RTCs for boards without itJan-Simon Möller2-1/+13
We add the rtc driver as module so we can attach e.g. http://wiki.seeedstudio.com/Grove-RTC/ Add the necessary drivers as module. Change-Id: Iacb8247f9e2edccabe854284672353a847a27e0d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-18linux-renesas: Add smack patches to R-CarJosé Bollo1-0/+3
The patch for CGROUP2 is important for running without capabilities. Bug-AGL: SPEC-2006 Bug-AGL: SPEC-1016 Change-Id: I0dfec85bdc66b220e20776501522e71579e6a742 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-18linux-agl-4.14: Backport of Smack patch for cgroup2José Bollo2-0/+41
This patch allows to correctly handle the cgroup filesystem based on CGROUP2. The patch is made available through the file linux-agl-4.14.inc Bug-AGL: SPEC-1016 Bug-AGL: SPEC-2006 Change-Id: I2dba8bf0341d699c66a098c18fcb22a65b930e58 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-18linux-agl-4.14: Backport of Smack patch for keysJosé Bollo2-0/+118
This add a patch that allows to handles keys with keyctl when Smack is active. The patch is not directly enabled but is made available in the file linux-agl-4.14.inc that can be included. Change-Id: I6ad74b1119190e093eaa5878c55cd233b181346f Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-17Remove 4.9 patchqueue for new 4.14 kernel in meta-tiJan-Simon Möller1-1/+0
We update meta-ti to 4.14, thus we do no longer need the 4.9 patch queue of smack. Change-Id: I20d89c75029f29b0e6827979e70e85614d7a2e40 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-14Remove patch in newer ti-staging kernelJan-Simon Möller1-1/+0
The pending BSP update already has this patch applied (can be reverse-applied). Thus remove it. Change-Id: If3172270f40b21bd448c7113c7ab6f2a8f82023c Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>