summaryrefslogtreecommitdiffstats
path: root/meta-agl-core
AgeCommit message (Collapse)AuthorFilesLines
2023-02-12Prepare master for Prickly PikeJan-Simon Moeller1-3/+3
Update the distro manifest. Change-Id: Ifbbab5b081f3de4e070aa3f106c46ff0656468df Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28459 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2023-02-09weston-ini-conf/core.cfg: Bring in shell-ext-clientMarius Vlad1-0/+3
Rather than messing up the ini file, bring it in from the core configuration file. This allows to start-up the gRPC proxy server at start-up. This is a follow from Revert "weston-ini-conf: Add agl-shell-grpc-server" This reverts commit 2f40613cbf42fd378feea57ccefbb3215ecc1355. Change-Id: I40ab339fe73efb07ac1e86e6778764a553a3cabe Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28441 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-30Prepare Optimistic Octopus Milestone 4octopus_14.94.0octopus/14.94.014.94.0Jan-Simon Moeller1-3/+3
Update the distro manifest. Bug-AGL: SPEC-4691 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I4bb2e97dc32c3da7e9d24c843e951a99383b4229 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28438 Tested-by: Jenkins Job builder account
2023-01-29qemu: add bbappend to tweak PACKAGECONFIGScott Murray2-0/+6
Add a bbappend for qemu to tweak PACKAGECONFIG for target use to add libusb support. This is required for USB device passthrough for e.g. touchscreen support. Also enable libaio for potential performance benefits and selinux support for investigation into leveraging it for security improvement. Bug-AGL: SPEC-4618 Change-Id: If9a52bad0657a04d7fc7da3ba15cd14be611ffd4 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit cc422ba11f0a18b830422d41e47ba85481daa258) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28420 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-29systemd: enable iptc PACKAGECONFIGScott Murray1-1/+2
Add iptc to our systemd PACKAGECONFIG tweak so that bridging support will be available in systemd-networkd. Bug-AGL: SPEC-4618 Change-Id: I15d003ad69d6ca59613391beb2e78e3c5fe804cc Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 69e119b969baa88594b3264709e21037aa783bb7) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28417 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-29connman-conf: ignore tap interfacesScott Murray1-1/+1
Add tap* interfaces to the list of interface names that connman should ignore so that it will not conflict with the tap interfaces qemu may set up. This seems safe in general, as a usecase where it makes sense for connman to assign an address to a tap interface is not immediately obvious. Bug-AGL: SPEC-4618 Change-Id: Ic9185e4f93a44c2d9e4265513afc04a2ec4c3d4a Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 29afa2ad9f9d04477c7a80d3a35e83fb6e5227dc) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28416 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-29weston-ini-conf: make remote output configuration dynamicScott Murray2-1/+5
Rework things to also update the remote output configuration fragment based on the value of TRANSMITTER_OUTPUT_HOST. This helps when using different IP addresses for e.g. the KVM demo configuration. Bug-AGL: SPEC-4618 Change-Id: I198ff3e6a30b3968b4749998354a39325c088933 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 39def8ebd98c98e67304517ab118f9bde4cdf8e7) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28415 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-26Revert "weston-ini-conf: Add agl-shell-grpc-server"octopus_14.93.0octopus/14.93.014.93.0Jan-Simon Moeller1-2/+0
This reverts commit 2f40613cbf42fd378feea57ccefbb3215ecc1355. Reason for revert: This breaks the runtime with: Jan 25 04:07:51 qemuarm agl-compositor[456]: malformed section header: [shell-client-ext]\ncommand=/usr/lib/agl-compositor/agl-shell-grpc-server\n Jan 25 04:07:51 qemuarm agl-compositor[456]: [04:07:51.432] fatal: error opening or reading config file '/etc/xdg/weston/weston.ini'. Change-Id: I09f74614a9d7ec55550d46224ec1c1b96528eb0b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28354 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-26weston-ini-conf: Add weston-ini-landscape-no-activateRoger Zanoni1-0/+16
This change adds an option to use a weston.ini config in landscape mode with automatic activation disabled by default, to be used by wam. Bug-AGL: SPEC-4647, SPEC-4528 Signed-off-by: Roger Zanoni <rzanoni@igalia.com> Change-Id: Ibaeefc4cae07b3f4cb4bbc619bb068fd259d81fc Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28371 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-23Prepare Optimistic Octopus Milestone 3Jan-Simon Moeller1-3/+3
Update the distro configuration. Bug-AGL: SPEC-4677 Change-Id: If68d70f93ec35f9f921083f04779216ea33ca6e0 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28413 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2023-01-23weston-ini-conf: Add agl-shell-grpc-serverMarius Vlad1-0/+2
Now that we have gRPC server implementation start the agl-shell-grpc server by default. Change-Id: I1d00b29306f90ababc5277ecb71a101eea1a46ca Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28364 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-23agl-shell-activator_git: Bump SRCREVMarius Vlad1-2/+2
This SRCREV bump adds gRPC support and removes agl-shell-desktop support. Change-Id: I946a9563321a6d9b5c756a364726fd3037ba5b63 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28363 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-23agl-compositor_git: Bump agl-compositor SRCREVMarius Vlad1-2/+3
This SRCREV bump includes the addition of agl-shell-grpc-server, an interface to agl-shell-desktop protocol, but instead of using wayland connection it uses Google's RPC. For the time being there's only a client using it, and that is agl-shell-activator. The plan is to phase out agl-shell-desktop entirely and use this interface as a way to perform additional window management. Further more this bump also includes a couple of connector hot-plug fixes and renames hide-cursor to disable-cursor entry section to better reflect its name. In more detail the following changes have been added: - 7ef34e0c465a7596 shell: Verify agl-shell version for bound_ok/bound_fail - c01b90ece22cc587 shell: Add fallback agl-shell version 1 - 0907e87f1576f8ad input: Fix minor issue while reporting disable cursor - c9d3edb4ee23a563 input: Rename hide-cursor to disable-cursor - 76fa1b83638310c2 src: Verify if the output is present - 79eac214d4866d84 src: Further hotplug connector fixes - 59375972f5642b7e grpc-proxy: Init gRPC - 0b766cf978b8b100 shell: Not not override the agl_shell interface resources - c42f50b567a0d5ad shell: Add a wrappers for sending events with agl-shell - 05bb0384732480a9 compositor: Allow to start other clients - 14a1292a39377472 agl-shell.xml: Introduce a new interface - 33997a7c96838795 compositor: Handle output destruction deferral Change-Id: I6df1d7fcf6d5d3abcc3c1c2b8a0cf820368a26de Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28318 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-22Exempt nfsroot and nbdroot from systemd-networkdJan-Simon Moeller2-2/+4
We need to exempt these in our wired configuration is using nbdroot or nfsroot. Likewise we can relax the connman settings again. Change-Id: I10fb9c97db1aba04941bf33f3e9d8a06a963cfac Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28406 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2023-01-20weston/0001-simple-touch-Add-maximized-fullscreen: Add maximized/fullscreen ↵Marius Vlad2-1/+138
for simple-touch simple-touch wasn't able to resize itself to max/fullscreen to this patch adds support for that. It is quite useful to have this client test out touch support, so we can re-use it whenever, for instance in the virtio aarch64 machine to test if we have indeed or not a touchscreen device. Upstream-Status: Submitted See: https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/1095 Bug-AGL: SPEC-4656 Change-Id: I974b4c5ea8a85f1b3efe4a114f345de948441300 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28314 Tested-by: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-07files/group: add render group with static ID for new systemdDenys Dmytriyenko1-0/+1
Yocto Project 4.0.6 now comes with systemd v236, which uses render group: https://git.openembedded.org/openembedded-core/commit/?h=kirkstone&id=f902338f312cf5c55b2857e5c7e980cb11a26a9c https://git.openembedded.org/openembedded-core/commit/?h=kirkstone&id=ba1db7f9189526b02e3d75d375ece53953c2e942 Bug-AGL: SPEC-4668 Change-Id: I473644f4b9e57663f036b43a48a8319e4d664d65 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28369 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-30systemd-conf-canbus: Add link configurationScott Murray2-2/+17
Add a .link file to set the transmit queue length to 1000 for physical CAN devices. This matches the default used for vcan devices, and in testing fixes the transmit buffer overflows when running the simulator script against an interface. Bug-AGL: SPEC-4652 Change-Id: Icb190cdcbda9b09e337789d3a88e39f7288f34eb Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28291 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-18Prepare Optimistic Octopus Milestone 2octopus_14.92.0octopus/14.92.014.92.0Jan-Simon Moeller1-3/+3
Update the distro configuration. Bug-AGL: SPEC-4650 Change-Id: Ibf5234fb83798df32e4b0f9eccb19419a0740f82 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28298 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-16linux: config: add systemd sandboxing fragmentDenys Dmytriyenko2-0/+10
Add a kernel config fragment that enables additional features needed for systemd sandboxing support, using Classic BPF (Berkeley Packet Filter) kernel framework. Eventually this will be extended with more advanced features using eBPF (extended BPF), BTF (BPF Type Format) and LSM (Lunux Security Module) frameworks. Bug-AGL: SPEC-4627 Change-Id: I9ed21c654b2e0298be66073750dab6920e49b0c9 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28297 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-16linux: config: move CONFIG_AUDIT* into own fragmentDenys Dmytriyenko3-2/+3
Enabling CONFIG_AUDIT* is needed by auditd and should be safe whether systemd is used or not and is not specific to SELinux. Note that systemd README has this old caveat mentioned | Note that kernel auditing is broken when used with systemd's | container code. When using systemd in conjunction with | containers, please make sure to either turn off auditing at | runtime using the kernel command line option "audit=0", or | turn it off at kernel compile time using: | CONFIG_AUDIT=n | If systemd is compiled with libseccomp support on | architectures which do not use socketcall() and where seccomp | is supported (this effectively means x86-64 and ARM, but | excludes 32-bit x86!), then nspawn will now install a | work-around seccomp filter that makes containers boot even | with audit being enabled. This works correctly only on kernels | 3.14 and newer though. TL;DR: turn audit off, still. But that seems to only apply to nspawn usage in some specific cases and on older kernels, plus there are even runtime workarounds available when needed, so let's enable it by default. Bug-AGL: SPEC-4627 Change-Id: I5fcd58ba41929d2966fadea27b6751e4fa6589c9 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28276 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-16linux: config: enable kernel settings that systemd requiresDenys Dmytriyenko2-0/+44
Add kernel config fragment with all settings required by systemd. Some more generic settings need to be explicitly set here as well to satisfy necessary dependencies from systemd settings down the tree, otherwise some BSPs would break. Bug-AGL: SPEC-4627 Change-Id: I7a2796ea65da58a4f1fa0556cd94df67e7df7db9 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28275 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-10Update cluster network configurationScott Murray3-3/+3
Update configuration files as appropriate with the IVI board as 192.168.10.2 and the cluster as 192.168.10.3. Bug-AGL: SPEC-4632 Change-Id: Idd41daa75fc6258d07d8f654848e78ced85dff35 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28154 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-10systemd-conf-canbus: Add FD configurationScott Murray2-0/+13
Add canbus-can-fd.network configuration that can be selected via CANBUS_NETWORK_CONFIG. Bug-AGL: SPEC-4633 Change-Id: Ic662be3e991910a4b35e114f144fe399a88ce477 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28153 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-08libsdl2: PACKAGECONFIG tweaksScott Murray2-0/+4
Add a couple of bbappends for libsdl2 to tweak its PACKAGECONFIG, based on Panasonic QEMU+KVM documentation. Bug-AGL: SPEC-4618 Change-Id: I7ceb4e46faa88f09311ad359a3b0b13a462f6cb2 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28192 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account
2022-12-08linux-yocto: Rework virtio-aarch64 kernel configurationScott Murray1-0/+4
Changes: - Appending the virtio kernel metadata to SRC_URI in the linux-yocto bbappend was having the side-effect of overriding a lot of the changes from the other AGL configuration fragments. To avoid this, prepend the addition to AGL_KCONFIG_FRAGMENTS instead. - Add the HDA sound driver config fragment for virtio machines to allow using the QEMU emulation. - Add config fragment for the virtio kernel to ensure that CONFIG_DRM and the fbdev emulation are on. - Add config fragment for the virtio kernel to turn on CONFIG_PCI, as there are some peripherals that we may need to expose to guests with it. This and the DRM changes will be rationalized in the metadata repo once it's clear we do need them. Bug-AGL: SPEC-4618 Change-Id: I453b84d9840498772afd01404dd374f5c1d245da Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28191 ci-image-build: Jenkins Job builder account Tested-by: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-08linux: config: move BBE-specific fragment from meta-agl-core to meta-agl-bspDenys Dmytriyenko2-2/+0
Commit d009fa0c42042a0b7d069779852953621e46469b as part of SPEC-4156 added a kernel config fragment to disable CONFIG_RELAY. Since this fragment is only applied to BBE, there's no need for it to reside in meta-agl-core and can be moved to meta-agl-bsp/meta-sancloud. Bug-AGL: SPEC-4156 Change-Id: I5da2632d6eb00bbf99ddb48cef861564d2ce868d Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28203 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-08linux-agl-config: correct override syntax for virtualmachineDenys Dmytriyenko1-1/+1
Commit dd6fc5dcaa0a027b7651bb365d5dd0f623498f8f as part of SPEC-4052 converted all overrides to the new syntax, but missed the one used for "virtualmachine" Bug-AGL: SPEC-4052 Change-Id: I1905c7e3b70b05c4ef06d8b4f240d0e144587fab Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28204 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23Prepare Optimistic Octopus Milestone 1octopus_14.91.0octopus/14.91.014.91.0Jan-Simon Moeller1-2/+2
Update the distro configuration. Bug-AGL: SPEC-4616 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iba55e4e0e51bfec2a1949a0fc9775760a6a8732b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28177 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-11-23meta-agl-core: systemd: Disable `BitRate` setting for `can*` network for VIRTIO.Vasyl Vavrychuk5-4/+33
VIRTIO CAN [1] does not support bitrate configuration, it assumes bitrate configuration is done on backend. Fixes systemd-networkd failure: can0: Failed to set CAN interface configurations: Operation not supported File `canbus-virtio-can.network` is copied from `canbus-can.network` with `BitRate=` setting removed. v2: rework patchset to use own systemd-conf-canbus package to avoid changes in main systemd package. [1]: https://lists.oasis-open.org/archives/virtio-dev/202208/msg00159.html Bug-AGL: SPEC-4597 Change-Id: Idb132203501bb99103e76098eea3bb6394b645da Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28104 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23weston-ini-conf: add virtio-aarch64 configurationScott Murray1-0/+1
Add a WESTON_DISPLAYS tweak for the virtio-aarch64 machine so the demo platform image gets the required weston configuration when built for it. Bug-AGL: SPEC-4618 Change-Id: I90974a25d51fc3b4ad3d8e9450d98f8ae82f759a Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28187 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23native-shell-client: Add recipeScott Murray1-0/+16
Add recipe for native-shell-client simple agl-shell protocol client. It can be used for testing agl-compositor and also enables using it in simple usecases such as displaying the output from guest VMs with QEMU+KVM. Bug-AGL: SPEC-4618 Change-Id: I16b7c8b703b2aa3c875b7ffd78b24021eafd3a7f Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28186 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23agl-compositor: RDEPENDS fixesScott Murray3-2/+2
Changes: - Add the required xkeyboard-config RDEPENDS to the agl-compositor recipe to avoid surprises if nothing else that pulls that in is in an image. - Move the agl-compositor RDEPENDS on polkit directly into the recipe instead of getting indirectly via a meta-oe presence driven addition to packagegroup-agl-graphical-weston. This is more correct, avoids surprises if that packagegroup happens to not be used, and will work better with a binary packagefeed. The RDEPENDS is still conditional on the presence of "polkit" in DISTRO_FEATURES, which seems a reasonable alternative to using dynamic-layers. Bug-AGL: SPEC-4619 Change-Id: I595f55a9d598b4a15fe345f50d1a7a203616dd15 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28184 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-21agl-compositor: Bump SRCREVScott Murray1-1/+1
Bump agl-compositor SRCREV to pick up: adf173e layout: Allow background surface roles (to) be activated 77d94d8 agl-shell: Add support for defining an activation area Bug-AGL: SPEC-4594 Change-Id: I4d003c4ce26fe3e6b3e3fe07b845538a5a9e508c Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28181 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-11-21Enable qemu and kvm user and groupJan-Simon Moeller2-0/+3
This supports the meta-virtualization layer. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I919f9669c0c9aff83d6f0b961d892eb6077902a6 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28055 Tested-by: Jenkins Job builder account
2022-11-21Exempt also nbd.server in connman serviceJan-Simon Moeller1-1/+2
This adds a check for the nbd.server kernel commandline and prevents connman service from being started. If nbdroot is set and the networkinterface is resetup, then the rootfs will fail. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Ic15fade35fd2c47b828e51692609d438225ef739 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28054 Tested-by: Jenkins Job builder account
2022-10-18agl-compositor_git.bb: Bump SRCREVMarius Vlad1-1/+1
This SRCREV bump update brings in a helpful way to designate a certain area such that the compositor would use it when activating applications, rather than using the entire output. When not having panels the background surface would cover the entire output, making it impossible to keep visible areas of the background surface and, in the same time, display another's application surface. While the solution would be use panels specifically designed to handle this case, that's not always possible. We circumvent that by having this area specified manually in this update, with a direct follow-up to have a request in the agl-shell protocol that specifies that area programmatically. Besides that change, a few more changes made it through, all of them being added from upstream and adapted from weston to the AGL compositor, mostly related to how we handle signals. In detail the following changes made it through since the last SRCREV bump update: - 924473ef016b Add manual activation area configuration option - 897449688a9c compositor: Use sigaction to trap SIGINT - e8761762fcd0 compositor: Add missing SIGCHLD handler - 315496ddbb9f compositor: Stop trapping SIGQUIT - f980c0d90329 shell: Rewrite client_exec as client_launch - edb6d397a4c6 process-util: Move Xwayland fork helpers to shared - 86146a4e7455 shared: add str_printf() - 1b93121761e1 shared: introduce os_fd_clear_cloexec() Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I23e0aba9f2b77cab4fe81754a8feaeebb7cea340 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28056 ci-image-build: Jenkins Job builder account Tested-by: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-10-08meta-app-framework: applaunchd: run under a separate userDenys Dmytriyenko2-0/+2
Since applaunchd needs to start/stop systemd units, the user is granted elevated systemd unit-management permissions via PolKit policy. If applaunchd and all the apps run under the same agl-driver user, all the apps have these elevated systemd permissions too. Separating them into different users allows removing elevated systemd unit-management permission from individual apps, but leaving such permission for applaunchd, which enhances overall security of the system. - add new applaunchd user and group - switch applaunchd (gRPC) service to be started under new user - since HTML5 apps haven't migrated to gRPC yet and still use D-Bus API, applaunchd-dbus gets activated by agl-session and runs under agl-driver - temporarily add agl-driver user into the applaunchd group and switch PolKit policy to check for applaunchd group, instead of the user - once D-Bus API is completely deprecated, agl-driver user can be removed from applaunchd group Bug-AGL: SPEC-4579 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Change-Id: I75384177578bba6cb458a81df6a9dc1738c972e0 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28039 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-25weston-ini-conf.bb: Change from append to an inline editMarius Vlad1-2/+1
We don't really support section entries with the same name, so rather than appending a new key entry value under the same section, use sed to edit the configuration file in place. Fixes 6a8a33f99a66ae1 Bug-AGL: SPEC-4528 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I12b982dd7e6dd8d11e5fb373c8cba0b1e762c485 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28019 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-25Add openssh-sftp-server when agl-devel is onJan-Simon Moeller1-0/+1
For simplified development workflows on newer host distros add the sftp server. Bug-AGL: SPEC-4443 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I580e5d342fb6afb286b00d41b03c98a9b936160f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28018 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Marius Vlad <marius.vlad@collabora.com>
2022-09-22weston-ini-conf: Add weston-ini-config-no-activateMarius Vlad1-0/+16
This patch adds a way to tick dynamically activate-by-default to false, and provide a safe migration towards disabling by default activation entirely. We do this with just only the Qt toolkit and will proceed with WAM/chromium once that has support as well for this. Bug-AGL: SPEC-4528 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I3573ea92d3ea865db223bd01e58b9ec202cfa7ae Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27990 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-22agl-compositor_git.bb: Bump SRCREV to grab latest changesMarius Vlad1-1/+1
This SRCREV bump update for the AGL compositor includes two new protocol updates, one that adds two new events, specifically bound_ok, bound_fail which would allow clients to determine if they're in charge of managing panels and background surfaces. The other protocol update fixes an issue with activation by default of applications but also paves the way to move out bits from the agl-shell-desktop protocol to just the agl-shell protocol. Note that the shell client supporting the latest change of the protocol will need to add at least add stubs for the v2 of the protocol, even if v2 isn't required to be supported at all. Updates to version 3 of the protocol will be required once we'll switch out from activation by default from true to false and finally remove support from the compositor entirely and let the shell client be the one in charge for activation. Additionally, this bump includes a few fixes, most notable handling remote surface roles much better, including migration, in real time of applications from one output to another, making possible a back-and-forth movement of applications. In more detail the following changes have been included: - d08a5b2010f6e6 desktop: Do not attempt to send terminate event - 0512e7251611e7 protocol/agl-shell.xml: Add an app_state event -- app state notification - bb730ca304a5f6 layout: Handle dynamic application/surface movement between outputs - b92397ef12626a shell: Remove the black curtain installed on outputs - 372eb222b17bbc layout: Detect when an application should be migrated to other outputs - 39c91d5ccae3b6 desktop: Avoid sending the dimensions for the first output - a99d56dad0ad4a layout: State explicity the output - fc783c19e6f6b9 layout: Use view's mapping once we placed the view in the hidden layer - e1b15f95e834ac desktop: Install a black background for REMOTE roles - bb79d12c92fa6e desktop: Include REMOTE role in initial configuration - 3e72564852a6f3 agl-shell: Add bound_ok and bound_fail events and a default destructor Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I25c53e9d69270651cd40c7ee9ec3edce28f899a6 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27989 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-16Change master branch name to octopusJan-Simon Moeller1-5/+5
Long live the new codename 'Optimistic Octopus'. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I1f12f334a2082ffa813cb453aa976ef5f995732c Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27998 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-09-01weston_10.0_aglcore.inc: Update wl_output to version 4Marius Vlad2-1/+118
This allows clients to query the output name and description name as seen by the compositor. Previously this was only possible only with xdg_output_manager extension but a recent update to the core wayland protocol allows us to do just that. Patch is posted upstream https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/987, but will take some time to get in, as we're in the process of a release. Bug-AGL: SPEC-4530 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I709b941a220e9906078944ee585435df7141d448 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27949 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-01recipes-graphics/wayland/weston: Add tile orientation statesMarius Vlad2-0/+170
This was recently integrated into libweston 11 pre-release, and should be removed once yocto updates its libweston version to at least 11. For the time being we'll rely on these to have split type of windows. Bug-AGL: SPEC-3906 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I7bc5caa6126d36d843d0f00cde56c020fa3f97dc Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27906 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-08-22qtbase: Add backported patches for OpenSSL 3 supportScott Murray3-0/+177
To make QSslSocket work when building with OpenSSL 3.x, add two backported patches pulled from the v5.15.3-lts-lgpl branch of the KDE repo: https://invent.kde.org/qt/qt/qtbase This appears to be the minimal fix for e.g. QtLocation's SSL usage. For more information on the KDE Qt5 patch collection, see: https://community.kde.org/Qt5PatchCollection Bug-AGL: SPEC-4395 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I0bc3fe7c0726aaea71a2c162db040e57ac92a9db Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27902 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-08-05Prepare Nifty Needlefish Milestone 3Jan-Simon Moeller1-1/+1
Update the distro manifest. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I8899b1140ddc2e12a025c2ba537852420dd6aedd Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27864 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-08-04Add empty for append syntaxChanghyeok Bae1-1/+1
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com> Change-Id: I3a67f2dca0148be04d96e5261a4bef4030e93fbf Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27852 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-07-31Prepare Nifty Needlefish Milestone 2needlefish_13.92.0needlefish/13.92.013.92.0Jan-Simon Moeller1-1/+1
Update the distro configuration. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Id87aff77dff68ff0bdd8fdac067ad0e7a40a38db Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27849 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-07-29Fix a dependency issue when building the SDKJan-Simon Moeller1-0/+4
When using -c populate_sdk, then the -dev packages are installed. There is a hard dependency of the -dev package on the package. As we have multiple subtypes here and switch using ALTERNATIVES, this collides in this corner case. Fix it by not creating a -dev package in the first place as it is not needed here anyway. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I21326c9edc5cb7571ed94593eae1075cf56353db Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27841 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Marius Vlad <marius.vlad@collabora.com> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-07-27Add SELinux featureScott Murray11-1/+163
Add agl-selinux feature to enable SELinux support. Notes: - SELinux is in permissive mode by default for now, and using the targeted policy by default. - The linux-yocto specific bbappend in meta-selinux is masked out in favor of adding a more universal kernel configuration fragment with AGL's own scheme. - SELinux specific recipes and bbappends are added via a meta-selinux dynamic-layers addition in meta-agl-core to keep using meta-selinux optional. This will avoid issues with the Yocto autobuilder testing of meta-agl-core. - To avoid the effectively hard-coded autorelabel on first boot, a bbappend is added to the selinux-autorelabel recipe to remove the flag creation. In the off chance that a build happens on a filesystem without xattr support, the logic in the selinux-image bbclass will still touch the /.autorelabel flag and trigger relabeling. - A systemd unit and script are added with a new systemd-selinux-relabel recipe to handle relabeling of some systemd generated files that do not get handled during root filesystem construction. Some of these can be addressed by some upstream tweaks, but /etc/machine-id will always need special handling unless there is a shift to using read-only or stateless root by default. With this workaround we still avoid doing a full relabel and reboot on first boot, which helps simplify CI. Bug-AGL: SPEC-4332 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ibf469e11eb3a67709074cc6794b3d12cd5071a90 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27790 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>