Age | Commit message (Collapse) | Author | Files | Lines |
|
Bump the distro configuration.
Change-Id: Icb7ac269a6b8cdd74f2b2d1d4a85d51202c9225e
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Now that the new navigation application is ready,
change the default navigation application.
This replaces https://gerrit.automotivelinux.org/gerrit/#/c/19831/ .
Change-Id: Iac516672087d231d5ea0b43764ce12e3d3c20580
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The next AGL version will be updated to use YP 2.6 'thud' and
have the nickname 'Happy Halibut'.
Change-Id: I9fc47eeebf268361fe0c2fb2659cff28a65dfb40
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
To enable WWAN support for AGL add 3g to AGL_DISTRO_FEATURES
Change-Id: Ib43344a6b6796afe19296fee14fddb5b2b23636a
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Change-Id: I5883f78b91740ffc06f77dba1fed6c33218370d9
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Cut the rc4 of guppy.
Change-Id: I29803ddf028d6c46cb300d03f31fe2ade9931add
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
we're heading towards rc4 now.
Change-Id: I06afbe8fd76a4d7eaf8a72353eae0363ee8f8a53
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
We cut GG rc3 after the CES integration session.
Notable changes:
- Microphones working
- Bluetooth
-- A2DP in mediaplayer
-- HFP (one call due to pending bug)
- Mediaplayer and Radio ramping (radio lower prio)
- btwilink disabled on kingfisher (unstable)
- agl-demo-preload feature (load maps, POI api key, ...)
- nfc improvements
Change-Id: I978dd02a0b4d5aefcfc0d7d46287b27bc1f1d396
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
we're heading towards rc3 now.
Change-Id: I294f40e5c6f779a6ee7db984c2d475e9e230f54d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change the distro configuration in preparation of GG RC2.
Change-Id: I2eb05adf8f4f909d90aed81b75ba04a0933ae02e
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I39ef7dc1023c80ca313ad80d5bd10df0c4fbe0c9
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Modify the distro config to reflect the RC1 release.
Change-Id: If46096e12c0917ee517835e5803ec32b80a6a37a
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
optee-client fails to compile when enabling FORTIFY_SOURCE=2 option.
Change-Id: I4e4a5fea098470f63a3d8b49b9bb4fc8b8c0bbbc
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Bug-AGL: SPEC-1601
Change-Id: I5f6f82dad72cb5f1570c6354d360cebd056489a1
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
* The SDKPATH must be fix to be used with YoMo.
Inside rpm nativesdk file all the path is prefed by
SDKPATH/sysroots/${HOSTARCH}-${SDK_VENDOR}-${OSHOST}/
* have a (day) time stamp in ${DISTRO_VERSION} force the rebuild of
the package every day.
eg:
At runtime /etc becomes:
(old value):
/opt/agl-sdk/6.90.0+snapshot-20180921-aarch64/sysroots/x86_64-aglsdk-linux/etc
(new value):
/opt/agl-sdk/6.90.0+snapshot-aarch64/sysroots/x86_64-aglsdk-linux/etc
in native sdk
Bug-AGL: SPEC-921
Bug-AGL: SPEC-1667
Change-Id: I28d7f8d140ba75d9d8c68c84ba5fc697e6011836
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
We move master to guppy and development.
Change-Id: If6fc9f1e89298f604e94055b75362df7a7cbdde0
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change the distro config for the RC6.
Change-Id: I174d28086f7b9de8d94840f7451b65f8ba06c347
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Adapt the distro config.
Change-Id: I216fc5071e8f7a6ff5df221224bd065698ee5a8d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Adapt distro conf.
Change-Id: Ic4f5463967870d9caebdc0a1a47f5811faf3b60d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Open up development for rc5/final.
Change-Id: I8a724aec556e4020c60dc6e920c97ed776cf7499
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change the distro vars for RC4.
Change-Id: I74af40b74fd55bae4c0779c055ba97499c354e75
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Installing 2 SDKs of the same version but different arch
results in broken compilation due to a bug in the meta-qt5 sdk
environment scripts.
Mitigate it by adding the DEFAULTTUNE to the SDK installation
folder until the issue can be addressed in SPEC-1686.
Bug-AGL: SPEC-1667, SPEC-1686
v2 (jsmoeller): rewrite to use /opt and SDKPATH
Change-Id: Id7e6c919631fc0bcc630a6b813a714f83adaf148
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: Ibb43e5499ebc2c271843dad4ba0162b6cce9bf9c
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Some issues appear with the current version of valgrind on aarch64.
(valgrind exits due to an unhandled instruction)
An update of valgrind solves this problem.
I guess other platform need a update on valgrind too, so this port is
not gen3 exclusive.
This port uses the yocto
recipes(poky:7e7ee662f5dea4d090293045f7498093322802cc):
* with some fix on the patch.
* remove patch already merged in valgrind git.
Bug-AGL: SPEC-1677
Change-Id: Ibf467bee03487252f24ef046b9fe4e4ff6d389da
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Change the distro vars to FF rc3.
Change-Id: I75afebf4dfed7fafd80cbfb2fcc5d369048fbefa
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
See https://jira.automotivelinux.org/browse/SPEC-1629 for the details.
Bug-AGL: SPEC-1629
Change-Id: Id828aab52826b14005d69af5bfaddc4a4c709842
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Open-up the app builds again post-rc2.
Change-Id: I231608c7aecb8180a9a50e4c95302f5d6cf0a546
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
respin rc2
Change-Id: If860a1797650625350350cf42ab8f0b996e9337c
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I7176338b5608f6cef857d3426c7e6f21e202bd3b
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
In preparation of the 2nd release candidate of Funky Flounder.
Change-Id: Id26c91112c54a99a1fa8f16311049b15e0ac5544
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I6f9f494a5456bd7c2e9f6a11c7cf36d50f488571
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Modify the poky-agl.conf to match the rc1 version.
Change-Id: I0619bcab2ab1274905477d53e62f924fa1141009
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The hotfix is still necessary as of 2018-06-15 in the meta-qt5 version we use.
Change-Id: If650d3056deb604107145dc501a4ba0bf95802e3
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This is the last larger commit in this series and deals with the graphical part.
We introduce the graphical profiles:
- meta-agl-profile-graphical
-- meta-agl-profile-graphical-html5
-- meta-agl-profile-graphical-qt5
Notable changes:
- weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images.
- new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds
- new image/sdk: agl-image-minimal-crosssdk
- agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical.
- The wayland-ivi-extension moved to the agl-demo-platform.
- The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now.
- added and massaged the agl-features.
- found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g)
Todo:
- we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages.
For further details, see meta-agl/docs/profiles.md.
v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES.
v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel)
v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane)
v5: fix missing packagegroup inclusion
v6: explicitely put profile-graphical-qt5 on-top of profile-graphical
v7: re-add 'procps' when agl-devel feature is on
Bug-AGL: SPEC-145
Change-Id: I24cdcd1118932758d0c55d333338238f2a770877
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
|
|
Upgrade wayland-ivi-extension version to 2.0.% from 1.13.
Currently, version is 2.0.2
This change is for only master branch.
Bug-AGL: SPEC-1244
Change-Id: I200c19837b8f7b646296a868c14423e55e98bf86
Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
|
|
Bug-AGL: SPEC-1181
Change-Id: Ib5aa07171a361210b9bae0f62f38595c62099dda
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
|
|
Currently, we hardcode GPLv2/GPLv3 logic directly into the poky-agl
distro config, and in agl-demo. However, the recipes in meta-gplv2 are
very old, poorly supported, and receive no security updates. So, they
can easily cause issues.
To allow the choice of both GPLv2 and GPLv3, refactor the meta-gplv2
logic into its own "agl-gplv2" feature. The default is GPLv3, which
points to well-supported layers with security updates. However, by
adding the "agl-gplv2" feature in aglsetup.h, the meta-gplv2 layer gets
added to bblayers.conf and recipe versions get set to those in
meta-gplv2.
Change-Id: I62d7f2daa58b0690b5b27740257bd15097fcee5c
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
Change-Id: Ic0f97832caeeb0952e64dec73d98f2c77483660a
Bug-AGL: SPEC-1256
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Make PREFERRED_VERSION of packages of ones that are in meta-gplv2 to
clean up GPLv3 taint
Bug-AGL: SPEC-1256
Change-Id: I07b20e7869b4839253e803c13c33c69bea0ef687
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
This changeset prepares the next cycle towards FF
Change-Id: I6051297b47c076d0fa79c153e7d5528f20a30740
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
mxml is not neeeded anymore as a dependency of agl-service-unicens
so the override on SECURITY_CLAGS can be removed
Bug-AGL: SPEC-1108
Change-Id: I704fdeed2db07a159a1cd32ebcf6ae93d8702a2b
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12171
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I11fdb68861c74532fa2cd1014195f1585330d981
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12161
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Backported M.Teyfel patch from wayland-devel mailing list:
https://lists.freedesktop.org/archives/wayland-devel/2017-November/035700.html
Upgrade wayland-ivi-extension to v2.0.2 but keep
using 1.1x for now with PREFERRED_VERSION until HMI could use the new
version.
Added Emre Ucan simple-id-agent to review.
Bug-AGL: SPEC-1096
Change-Id: I74c4ae0bf0bf822e27dcbb193dc9f7a13d3e270d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11991
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Nobuhiko Tanibata <nobuhiko_tanibata@denso.co.jp>
Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I0adcb275bca01ef7e32d6c0d6fdfabdf078e0bfc
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12149
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
The mxml shared library was failing to link on x86-64, disable the
SECURITY_CFLAGS on it for now until we can contact upstream and get
the underlying issue addressed.
Change-Id: I53578544222294119f4141ccc4dfa28d2737983b
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11999
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: Ib87b6ba6cccd56bb85b3c2086fc10227beaeffbc
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11779
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Change-Id: I5e286abc387fa15883ff288093cd5bc91b495ec0
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11691
|
|
This change simplifies the SRCREV handling by using
- AGL_APP_REVISION and AGL_DEFAULT_REVISION
in recipes.
Also the AGL_BRANCH can be used to switch to release branches.
Bug-AGL: SPEC-864
Change-Id: I9384c85d4f7434416d87359f88c482887ac2ead8
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11685
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|