Age | Commit message (Collapse) | Author | Files | Lines |
|
This changeset adds the necessary files to build
image for Synopsys ARC HS Development Kit (HSDK).
Most of necessary tunnings are stored in meta-synopys layer.
Synopsys DesignWare HSDK (which stands for ARC HS Development Kit)
is the latest and greatest development platform that sports
quad-core ARC HS38 in real silicon.
Most noticeable features of the board are:
* Quad-core ARC HS38 CPU running at 1GHz
* 4Gb of DDR
* Built-in Vivante GPU
* Built-in Wi-Fi/Bluetooth module
Peripherals:
* [micro] SD-card slot
* 2 USB 2.0 ports
* 1Gbit Ethernet port
* Built-in Digilent JTAG probe
* Serial port accessible via micro-USB port
New feature: SPEC-2346
Change-Id: I8772ee51cc3db9f6549da2d6a5ea2d116586cde6
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The next AGL version will be updated to use YP 2.6 'thud' and
have the nickname 'Happy Halibut'.
Change-Id: I9fc47eeebf268361fe0c2fb2659cff28a65dfb40
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
To enable WWAN support for AGL add 3g to AGL_DISTRO_FEATURES
Change-Id: Ib43344a6b6796afe19296fee14fddb5b2b23636a
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Change-Id: I5883f78b91740ffc06f77dba1fed6c33218370d9
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Cut the rc4 of guppy.
Change-Id: I29803ddf028d6c46cb300d03f31fe2ade9931add
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
we're heading towards rc4 now.
Change-Id: I06afbe8fd76a4d7eaf8a72353eae0363ee8f8a53
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
We cut GG rc3 after the CES integration session.
Notable changes:
- Microphones working
- Bluetooth
-- A2DP in mediaplayer
-- HFP (one call due to pending bug)
- Mediaplayer and Radio ramping (radio lower prio)
- btwilink disabled on kingfisher (unstable)
- agl-demo-preload feature (load maps, POI api key, ...)
- nfc improvements
Change-Id: I978dd02a0b4d5aefcfc0d7d46287b27bc1f1d396
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
we're heading towards rc3 now.
Change-Id: I294f40e5c6f779a6ee7db984c2d475e9e230f54d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change the distro configuration in preparation of GG RC2.
Change-Id: I2eb05adf8f4f909d90aed81b75ba04a0933ae02e
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I39ef7dc1023c80ca313ad80d5bd10df0c4fbe0c9
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Modify the distro config to reflect the RC1 release.
Change-Id: If46096e12c0917ee517835e5803ec32b80a6a37a
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
optee-client fails to compile when enabling FORTIFY_SOURCE=2 option.
Change-Id: I4e4a5fea098470f63a3d8b49b9bb4fc8b8c0bbbc
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Bug-AGL: SPEC-1601
Change-Id: I5f6f82dad72cb5f1570c6354d360cebd056489a1
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
* The SDKPATH must be fix to be used with YoMo.
Inside rpm nativesdk file all the path is prefed by
SDKPATH/sysroots/${HOSTARCH}-${SDK_VENDOR}-${OSHOST}/
* have a (day) time stamp in ${DISTRO_VERSION} force the rebuild of
the package every day.
eg:
At runtime /etc becomes:
(old value):
/opt/agl-sdk/6.90.0+snapshot-20180921-aarch64/sysroots/x86_64-aglsdk-linux/etc
(new value):
/opt/agl-sdk/6.90.0+snapshot-aarch64/sysroots/x86_64-aglsdk-linux/etc
in native sdk
Bug-AGL: SPEC-921
Bug-AGL: SPEC-1667
Change-Id: I28d7f8d140ba75d9d8c68c84ba5fc697e6011836
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
We move master to guppy and development.
Change-Id: If6fc9f1e89298f604e94055b75362df7a7cbdde0
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change the distro config for the RC6.
Change-Id: I174d28086f7b9de8d94840f7451b65f8ba06c347
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Adapt the distro config.
Change-Id: I216fc5071e8f7a6ff5df221224bd065698ee5a8d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Adapt distro conf.
Change-Id: Ic4f5463967870d9caebdc0a1a47f5811faf3b60d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Open up development for rc5/final.
Change-Id: I8a724aec556e4020c60dc6e920c97ed776cf7499
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change the distro vars for RC4.
Change-Id: I74af40b74fd55bae4c0779c055ba97499c354e75
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Installing 2 SDKs of the same version but different arch
results in broken compilation due to a bug in the meta-qt5 sdk
environment scripts.
Mitigate it by adding the DEFAULTTUNE to the SDK installation
folder until the issue can be addressed in SPEC-1686.
Bug-AGL: SPEC-1667, SPEC-1686
v2 (jsmoeller): rewrite to use /opt and SDKPATH
Change-Id: Id7e6c919631fc0bcc630a6b813a714f83adaf148
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: Ibb43e5499ebc2c271843dad4ba0162b6cce9bf9c
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Some issues appear with the current version of valgrind on aarch64.
(valgrind exits due to an unhandled instruction)
An update of valgrind solves this problem.
I guess other platform need a update on valgrind too, so this port is
not gen3 exclusive.
This port uses the yocto
recipes(poky:7e7ee662f5dea4d090293045f7498093322802cc):
* with some fix on the patch.
* remove patch already merged in valgrind git.
Bug-AGL: SPEC-1677
Change-Id: Ibf467bee03487252f24ef046b9fe4e4ff6d389da
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Change the distro vars to FF rc3.
Change-Id: I75afebf4dfed7fafd80cbfb2fcc5d369048fbefa
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
See https://jira.automotivelinux.org/browse/SPEC-1629 for the details.
Bug-AGL: SPEC-1629
Change-Id: Id828aab52826b14005d69af5bfaddc4a4c709842
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Open-up the app builds again post-rc2.
Change-Id: I231608c7aecb8180a9a50e4c95302f5d6cf0a546
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
respin rc2
Change-Id: If860a1797650625350350cf42ab8f0b996e9337c
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I7176338b5608f6cef857d3426c7e6f21e202bd3b
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
In preparation of the 2nd release candidate of Funky Flounder.
Change-Id: Id26c91112c54a99a1fa8f16311049b15e0ac5544
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I6f9f494a5456bd7c2e9f6a11c7cf36d50f488571
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Modify the poky-agl.conf to match the rc1 version.
Change-Id: I0619bcab2ab1274905477d53e62f924fa1141009
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The hotfix is still necessary as of 2018-06-15 in the meta-qt5 version we use.
Change-Id: If650d3056deb604107145dc501a4ba0bf95802e3
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This is the last larger commit in this series and deals with the graphical part.
We introduce the graphical profiles:
- meta-agl-profile-graphical
-- meta-agl-profile-graphical-html5
-- meta-agl-profile-graphical-qt5
Notable changes:
- weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images.
- new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds
- new image/sdk: agl-image-minimal-crosssdk
- agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical.
- The wayland-ivi-extension moved to the agl-demo-platform.
- The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now.
- added and massaged the agl-features.
- found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g)
Todo:
- we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages.
For further details, see meta-agl/docs/profiles.md.
v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES.
v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel)
v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane)
v5: fix missing packagegroup inclusion
v6: explicitely put profile-graphical-qt5 on-top of profile-graphical
v7: re-add 'procps' when agl-devel feature is on
Bug-AGL: SPEC-145
Change-Id: I24cdcd1118932758d0c55d333338238f2a770877
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
- The official hook for changing the resolution we tell QEMU is
UVESA_MODE so change agl_qemux86-64.inc to set the value there rather
than override the whole of QB_KERNEL_CMDLINE_APPEND.
- Make agl_qemux86-64.inc further append what's needed to
QB_KERNEL_CMDLINE_APPEND as APPEND isn't used in the filesystem images
we create anymore.
- Create a directdisk.wks.in file that will (a) use --use-uuid and not
force /boot to be looked for on /dev/sda1 (when it will _NOT_ be) and
(b) evaluate QB_KERNEL_CMDLINE_APPEND to determine what the bootargs
to the kernel will be.
Change-Id: I49894d70e6c0010e0907b72f19fcc8fb0917e34a
Bug-AGL: SPEC-1301
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
In commit f9a285987c5c956d445efeea6c60f258534fe57b, we disabled
gobject-introspection due to a build error as part of the Rocko
transition. However, the only build errors were on qemu, which were
caused by not emulating SSE4.2 (see poky commit
5b2b343453e805be013e721d079bc24de946f28b for details).
Emulate SSE4.2 in qemu and re-enable gobject-introspection.
Change-Id: I073db2c37623bb8ba6b7809ca0c3bba5213001e2
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
|
|
Upgrade wayland-ivi-extension version to 2.0.% from 1.13.
Currently, version is 2.0.2
This change is for only master branch.
Bug-AGL: SPEC-1244
Change-Id: I200c19837b8f7b646296a868c14423e55e98bf86
Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
|
|
Bug-AGL: SPEC-1181
Change-Id: Ib5aa07171a361210b9bae0f62f38595c62099dda
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
|
|
Currently, we hardcode GPLv2/GPLv3 logic directly into the poky-agl
distro config, and in agl-demo. However, the recipes in meta-gplv2 are
very old, poorly supported, and receive no security updates. So, they
can easily cause issues.
To allow the choice of both GPLv2 and GPLv3, refactor the meta-gplv2
logic into its own "agl-gplv2" feature. The default is GPLv3, which
points to well-supported layers with security updates. However, by
adding the "agl-gplv2" feature in aglsetup.h, the meta-gplv2 layer gets
added to bblayers.conf and recipe versions get set to those in
meta-gplv2.
Change-Id: I62d7f2daa58b0690b5b27740257bd15097fcee5c
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
Change-Id: Ic0f97832caeeb0952e64dec73d98f2c77483660a
Bug-AGL: SPEC-1256
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Make PREFERRED_VERSION of packages of ones that are in meta-gplv2 to
clean up GPLv3 taint
Bug-AGL: SPEC-1256
Change-Id: I07b20e7869b4839253e803c13c33c69bea0ef687
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
This changeset prepares the next cycle towards FF
Change-Id: I6051297b47c076d0fa79c153e7d5528f20a30740
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
mxml is not neeeded anymore as a dependency of agl-service-unicens
so the override on SECURITY_CLAGS can be removed
Bug-AGL: SPEC-1108
Change-Id: I704fdeed2db07a159a1cd32ebcf6ae93d8702a2b
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12171
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I11fdb68861c74532fa2cd1014195f1585330d981
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12161
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Backported M.Teyfel patch from wayland-devel mailing list:
https://lists.freedesktop.org/archives/wayland-devel/2017-November/035700.html
Upgrade wayland-ivi-extension to v2.0.2 but keep
using 1.1x for now with PREFERRED_VERSION until HMI could use the new
version.
Added Emre Ucan simple-id-agent to review.
Bug-AGL: SPEC-1096
Change-Id: I74c4ae0bf0bf822e27dcbb193dc9f7a13d3e270d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11991
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Nobuhiko Tanibata <nobuhiko_tanibata@denso.co.jp>
Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I0adcb275bca01ef7e32d6c0d6fdfabdf078e0bfc
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12149
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
The mxml shared library was failing to link on x86-64, disable the
SECURITY_CFLAGS on it for now until we can contact upstream and get
the underlying issue addressed.
Change-Id: I53578544222294119f4141ccc4dfa28d2737983b
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11999
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: Ib87b6ba6cccd56bb85b3c2086fc10227beaeffbc
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11779
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Change-Id: I5e286abc387fa15883ff288093cd5bc91b495ec0
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11691
|