summaryrefslogtreecommitdiffstats
path: root/meta-agl-profile-core/recipes-devtools/packagegroups
AgeCommit message (Collapse)AuthorFilesLines
2020-12-17SPEC-3723: restructure meta-aglJan-Simon Moeller2-37/+0
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time. Trim dependencies and move most 'demo' related recipes to meta-agl-demo. v2: changed to bbapend + .inc , added description v3: testbuild of all images v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups. v5: rebased v6: merged meta-agl-distro into meta-agl-core, due to dependency on meta-oe, moved -test packagegroup and -qa images to own layer meta-agl-core-test v7: Fixed comments from Paul Barker v8: Update the markdown files v9: restore wayland/weston/agl-compositor recipes/appends, reworked to move app f/w specific changes to bbappends in meta-app-framework and only demo specific weston-init changes to meta-agl-demo v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend Description: This patch is part 1 out of 2 large patches that implement the layer rework discussed during the previous workshop. Essentially meta-agl-core is the small but versatile new core layer of AGL serving as basis for the work done by the IC and IVI EGs. All demo related work is moved to meta-agl-demo in the 2nd patchset. This should be applied together as atomic change. The resulting meta-agl/* follows these guidelines: - only bsp adaptations in meta-agl-bsp - remove the agl-profile-* layers for simplicity -- the packagegroup-agl(-profile)-graphical and so on have been kept in meta-agl-demo - meta-agl-profile-core is now meta-agl-core - meta-agl-core does pass yocto-check-layer -- therefore use the bbappend + conditional + .inc file construct found in meta-virtualization - meta-agl/meta-security has been merged into meta-agl/meta-app-framework - meta-netboot does pass yocto-check-layer - meta-pipewire does pass yocto-check-layer Migration: All packagegroups are preserved but they're now enabled by 'agl-demo'. Bug-AGL: SPEC-3723 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
2020-11-16Add the nativesdk-cmake-apps-module-doc package to the SDKJan-Simon Möller1-0/+1
This is required to have the sample cmake files present in the SDK. These are mentioned in the cmake-apps-module documentation. Bug-AGL: SPEC-3688 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: I54012c9ef5c5c55b24d05789df852ba2a3b947c3 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25559 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-09-25meta-agl-profile-core: Add support for running gcovr on targetScott Murray1-0/+3
Changes: - Add recipe for gcovr gcov-based coverage report generating tool. - Add bbappend to apply patch to gcovr to add a new command-line option that allows working with the coverage information from the AGL widgets on target. The goal is to get this change upstream, hence not having it in the recipe (which also will be sent for inclusion in meta-oe). - Add a recipe to install an included wrapper script for gcovr (unsurprisingly named "gcovr-wrapper") that enables running it against bindings on target. The script supports installing the coverage version of a binding and running pyagl tests, afm-test test widget, or a user-supplied command before running gcovr in a carefully crafted environment that will allow it to work without impacting the root filesystem of the target. - Add gcov-symlinks, gcovr, and gcovr-wrapper to the packagegroup-agl-core-devel package group so they will be available in agl-devel images. The gcov-symlinks package adds /usr/bin/gcov, which simplifies picking it up for gcovr. Bug-AGL: SPEC-3589 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia2fdc200e4e0683f93a6e2a863311cd2107c962b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25337 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-09-11Add gcov to packagegroup-agl-core-develJan-Simon Möller1-0/+1
To enable handling coverage wgts in CI, we need gcov for postprocessing in the filesystem. Bug-AGL: SPEC-3484 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: I9af415ce8da499637af4d2e9680bdc5d9c7fc9e4 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25234 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-09-03meta-agl-profile-core: add pyagl to agl-devel imagesScott Murray1-0/+1
Changes: - Add recipe for pyagl, and add it as a dependency of packagegroup-agl-core-devel. - Add recipes for pyagl dependencies python3-asyncssh, python3-pytest-dependency, and python3-pytest-reverse. The intent is to get these into upstream meta-python so these local copies can be dropped when they're available from there. Bug-AGL: SPEC-3562 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I876ef2fffbe8724aadb23170e1ed196f05132f89 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25176 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-08-28meta-agl-profile-core: add pciutils to packagegroup-agl-core-develScott Murray1-0/+1
Add pciutils to packagegroup-agl-core-devel so tools like lspci are consistently available in devel builds for debugging. Bug-AGL: SPEC-3148 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I5794c092a2f6d2eff123d19bb5a9658ef43a62fe Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25155 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-05-12Widget packaging reworkScott Murray1-1/+0
aglwgt.bbclass changes: - Made the autobuild/agl/autobuild script a hard requirement, as all upstream widgets have it, and this is the first step to actually using it in the class to drive building the widgets after a subsequent round of autobuild script updates. - Reworked wgt packaging to simplify the logic and split the test, debug, and coverage widgets into separate packages to allow installing them separately. - The on target install directories for the widgets have been changed to release, test, debug, and coverage under /usr/AGL/apps, with the previous logic with respect to the AGLWGT_AUTOINSTALL variable being retained for the few widgets that need to go into the manualinstall directory. An "autoinstall" symlink has been added to point at the release directory to maintain previous behavior. This should allow a simple path to configuring installation of the debug or coverage widgets on first boot with future changes. - Added logic to only assume test widgets exist for recipes with names starting with "agl-service-". This can be over-ridden by defining AGLWGT_HAVE_TESTS as "true" in a recipe. - Added AGLWGT_EXTRA_BUILD_ARGS variable for passing extra arguments to widget builds. Currently its default value includes the previous VERBOSE=true that was passed to every autobuild invocation, and "${PARALLEL_MAKE}" which has been added to improve build speed. - Added AGLWGT_PACKAGE_WARN variable to control extra warnings around the existence of test/debug/coverage widgets when packaging. Once further build rework is done, the default for this will likely be changed to "true", currently the output is too verbose to do so. - Removed over-rides to force building of test widget when building with the agl-ptest feature set, as it is now unnecessary and will result in an undesired extra copy of the test widget in the release folder. Other changes: - Created new devel and test packagegroup variants for several of the existing packagegroups to contain the associated widgets. - Added agl-devel-wgt and agl-test-wgt IMAGE_FEATURES to control the addition of dbg/coverage and test widgets to images. Additions to the FEATURE_PACKAGES variables have been added in several places to add the corresponding widget packagegroups. - Added the agl-devel-wgt image feature to the agl-devel feature template definition to match current behavior. Bug-AGL: SPEC-3300 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I3a28615db94bbc04e30e98ac3dce8cae942a499f
2020-01-27Remove systemtap from AGLRonan Le Martret1-1/+0
- systemtap is not compatible with SOTA build. Change-Id: Ibdd7670b219b54f5c4243d0f67ce74e979f11db9 Bug-AGL: SPEC-3097 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2020-01-24packagegroup: agl-core-devel: add gcc-sanitizers packageMatt Ranostay1-0/+1
AddressSanitizers debugging requires shared libraries on runtime to function. Bug-AGL: SPEC-3040 Change-Id: Ibd7148f98f8ae9c9bd5989d4eeaef4256079955a Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-04-04Upgrade to thudScott Murray1-1/+0
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-10-29Add CMake Apps module recipeRomain Forlot1-1/+3
Adds the cmake-apps-module in the SDK and the normal Yocto builds. Bug-AGL: SPEC-1682 Change-Id: Ib8b83dd9664a1566318eb0a140e043c5d82510ce Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-08-24Add the afb-test binding in the devel AGL imageRomain Forlot1-0/+1
This will build afb-test binding and tests it using PTest. Bug-AGL: SPEC-1439 Change-Id: I75d1bbb0a780ca036ab0d653fdcbacda883122f9 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-08-03packagegroup: core: devel: add agl-service-network-tools packageMatt Ranostay1-0/+1
Include the agl-service-network-tools package into the core devel packagegroup Change-Id: I839951c06532608334254fd8f974deb5bea04ffd Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2018-07-25packagegroup-agl-core-devel: add jq and libxslt-bin to parse result filesflounder_5.99.2flounder/5.99.25.99.2Stephane Desneux1-0/+2
For QA, test and diagnostics, some files or results need to be parsed. jq and xsltproc are useful tools to process respectively JSON and XML files. Change-Id: I76810fbdbac2a5d1e243d2e87e63dd41530cdd99 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-05-313rd part of the layer/profile rework [1/2]Jan-Simon Möller1-0/+1
This is the last larger commit in this series and deals with the graphical part. We introduce the graphical profiles: - meta-agl-profile-graphical -- meta-agl-profile-graphical-html5 -- meta-agl-profile-graphical-qt5 Notable changes: - weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images. - new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds - new image/sdk: agl-image-minimal-crosssdk - agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical. - The wayland-ivi-extension moved to the agl-demo-platform. - The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now. - added and massaged the agl-features. - found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g) Todo: - we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages. For further details, see meta-agl/docs/profiles.md. v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES. v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel) v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane) v5: fix missing packagegroup inclusion v6: explicitely put profile-graphical-qt5 on-top of profile-graphical v7: re-add 'procps' when agl-devel feature is on Bug-AGL: SPEC-145 Change-Id: I24cdcd1118932758d0c55d333338238f2a770877 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-04-20Introduce meta-agl-profile-core and meta-agl-profile-graphicsJan-Simon Möller2-0/+25
Rework towards agl profiles. This change is part of a series of changes to create the AGL profiles. This set will mainly introduce the 'core' profile. It is setup to be a drop-in change, thus some files were kept in (dummy) locations for now. However, they'll be taken care of in the next changes in this series. The main target of the meta-agl-profile-core layer is to host: - a minimal, bootable image with network and package management enabled -- agl-image-boot - a minimal image with network and packagemanagement and the AGL APIs -- agl-image-minimal The layer meta-agl-profile-graphical is used as superset of these and includes support for egl+wayland+weston. All recipes concerning graphics were moved there. This is not a full profile as we still have to migrate some parts of meta-agl-demo in a follow-up changeset. The roadmap as discussed during the F2F session in Karlsruhe is: - week 16 : core profile and profiles w/o graphics - week 17 : graphical profiles - week 18 : final conversion of the demo image v2: moved agl-login-manager from -graphics to -core (see Jose's comment) v3: moved back after discussion - follow-up in separate changeset Change-Id: Idacb0d1274baac1f63f8d1b850d4b1104ac33918 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>