| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time.
Trim dependencies and move most 'demo' related recipes to meta-agl-demo.
v2: changed to bbapend + .inc , added description
v3: testbuild of all images
v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups.
v5: rebased
v6: merged meta-agl-distro into meta-agl-core,
due to dependency on meta-oe, moved -test packagegroup and -qa images
to own layer meta-agl-core-test
v7: Fixed comments from Paul Barker
v8: Update the markdown files
v9: restore wayland/weston/agl-compositor recipes/appends, reworked to
move app f/w specific changes to bbappends in meta-app-framework and
only demo specific weston-init changes to meta-agl-demo
v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend
Description:
This patch is part 1 out of 2 large patches that implement the layer rework
discussed during the previous workshop. Essentially meta-agl-core is the
small but versatile new core layer of AGL serving as basis for
the work done by the IC and IVI EGs.
All demo related work is moved to meta-agl-demo in the 2nd patchset.
This should be applied together as atomic change.
The resulting meta-agl/* follows these guidelines:
- only bsp adaptations in meta-agl-bsp
- remove the agl-profile-* layers for simplicity
-- the packagegroup-agl(-profile)-graphical and so on
have been kept in meta-agl-demo
- meta-agl-profile-core is now meta-agl-core
- meta-agl-core does pass yocto-check-layer
-- therefore use the bbappend + conditional + .inc file
construct found in meta-virtualization
- meta-agl/meta-security has been merged into meta-agl/meta-app-framework
- meta-netboot does pass yocto-check-layer
- meta-pipewire does pass yocto-check-layer
Migration:
All packagegroups are preserved but they're now enabled by 'agl-demo'.
Bug-AGL: SPEC-3723
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
|
|
This is required to have the sample cmake files present in the SDK.
These are mentioned in the cmake-apps-module documentation.
Bug-AGL: SPEC-3688
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I54012c9ef5c5c55b24d05789df852ba2a3b947c3
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25559
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Changes:
- Add recipe for gcovr gcov-based coverage report generating tool.
- Add bbappend to apply patch to gcovr to add a new command-line
option that allows working with the coverage information from the
AGL widgets on target. The goal is to get this change upstream,
hence not having it in the recipe (which also will be sent for
inclusion in meta-oe).
- Add a recipe to install an included wrapper script for gcovr
(unsurprisingly named "gcovr-wrapper") that enables running it
against bindings on target. The script supports installing the
coverage version of a binding and running pyagl tests, afm-test
test widget, or a user-supplied command before running gcovr in a
carefully crafted environment that will allow it to work without
impacting the root filesystem of the target.
- Add gcov-symlinks, gcovr, and gcovr-wrapper to the
packagegroup-agl-core-devel package group so they will be
available in agl-devel images. The gcov-symlinks package adds
/usr/bin/gcov, which simplifies picking it up for gcovr.
Bug-AGL: SPEC-3589
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia2fdc200e4e0683f93a6e2a863311cd2107c962b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25337
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
To enable handling coverage wgts in CI, we need gcov
for postprocessing in the filesystem.
Bug-AGL: SPEC-3484
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I9af415ce8da499637af4d2e9680bdc5d9c7fc9e4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25234
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Changes:
- Add recipe for pyagl, and add it as a dependency of
packagegroup-agl-core-devel.
- Add recipes for pyagl dependencies python3-asyncssh,
python3-pytest-dependency, and python3-pytest-reverse.
The intent is to get these into upstream meta-python so these
local copies can be dropped when they're available from there.
Bug-AGL: SPEC-3562
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I876ef2fffbe8724aadb23170e1ed196f05132f89
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25176
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add pciutils to packagegroup-agl-core-devel so tools like lspci are
consistently available in devel builds for debugging.
Bug-AGL: SPEC-3148
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I5794c092a2f6d2eff123d19bb5a9658ef43a62fe
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25155
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
aglwgt.bbclass changes:
- Made the autobuild/agl/autobuild script a hard requirement, as all
upstream widgets have it, and this is the first step to actually
using it in the class to drive building the widgets after a
subsequent round of autobuild script updates.
- Reworked wgt packaging to simplify the logic and split the test,
debug, and coverage widgets into separate packages to allow
installing them separately.
- The on target install directories for the widgets have been changed
to release, test, debug, and coverage under /usr/AGL/apps, with the
previous logic with respect to the AGLWGT_AUTOINSTALL variable
being retained for the few widgets that need to go into the
manualinstall directory. An "autoinstall" symlink has been added to
point at the release directory to maintain previous behavior.
This should allow a simple path to configuring installation of the
debug or coverage widgets on first boot with future changes.
- Added logic to only assume test widgets exist for recipes with
names starting with "agl-service-". This can be over-ridden by
defining AGLWGT_HAVE_TESTS as "true" in a recipe.
- Added AGLWGT_EXTRA_BUILD_ARGS variable for passing extra arguments
to widget builds. Currently its default value includes the previous
VERBOSE=true that was passed to every autobuild invocation, and
"${PARALLEL_MAKE}" which has been added to improve build speed.
- Added AGLWGT_PACKAGE_WARN variable to control extra warnings
around the existence of test/debug/coverage widgets when packaging.
Once further build rework is done, the default for this will likely
be changed to "true", currently the output is too verbose to do so.
- Removed over-rides to force building of test widget when building
with the agl-ptest feature set, as it is now unnecessary and will
result in an undesired extra copy of the test widget in the release
folder.
Other changes:
- Created new devel and test packagegroup variants for several of the
existing packagegroups to contain the associated widgets.
- Added agl-devel-wgt and agl-test-wgt IMAGE_FEATURES to control the
addition of dbg/coverage and test widgets to images. Additions to
the FEATURE_PACKAGES variables have been added in several places to
add the corresponding widget packagegroups.
- Added the agl-devel-wgt image feature to the agl-devel feature
template definition to match current behavior.
Bug-AGL: SPEC-3300
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I3a28615db94bbc04e30e98ac3dce8cae942a499f
|
|
- systemtap is not compatible with SOTA build.
Change-Id: Ibdd7670b219b54f5c4243d0f67ce74e979f11db9
Bug-AGL: SPEC-3097
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
AddressSanitizers debugging requires shared libraries on runtime
to function.
Bug-AGL: SPEC-3040
Change-Id: Ibd7148f98f8ae9c9bd5989d4eeaef4256079955a
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Adds the cmake-apps-module in the SDK and the normal Yocto
builds.
Bug-AGL: SPEC-1682
Change-Id: Ib8b83dd9664a1566318eb0a140e043c5d82510ce
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
This will build afb-test binding and tests it using PTest.
Bug-AGL: SPEC-1439
Change-Id: I75d1bbb0a780ca036ab0d653fdcbacda883122f9
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
Include the agl-service-network-tools package into the core devel packagegroup
Change-Id: I839951c06532608334254fd8f974deb5bea04ffd
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
For QA, test and diagnostics, some files or results need to be parsed.
jq and xsltproc are useful tools to process respectively JSON and XML files.
Change-Id: I76810fbdbac2a5d1e243d2e87e63dd41530cdd99
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
This is the last larger commit in this series and deals with the graphical part.
We introduce the graphical profiles:
- meta-agl-profile-graphical
-- meta-agl-profile-graphical-html5
-- meta-agl-profile-graphical-qt5
Notable changes:
- weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images.
- new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds
- new image/sdk: agl-image-minimal-crosssdk
- agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical.
- The wayland-ivi-extension moved to the agl-demo-platform.
- The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now.
- added and massaged the agl-features.
- found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g)
Todo:
- we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages.
For further details, see meta-agl/docs/profiles.md.
v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES.
v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel)
v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane)
v5: fix missing packagegroup inclusion
v6: explicitely put profile-graphical-qt5 on-top of profile-graphical
v7: re-add 'procps' when agl-devel feature is on
Bug-AGL: SPEC-145
Change-Id: I24cdcd1118932758d0c55d333338238f2a770877
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Rework towards agl profiles.
This change is part of a series of changes to create the
AGL profiles.
This set will mainly introduce the 'core' profile.
It is setup to be a drop-in change, thus some files were kept
in (dummy) locations for now.
However, they'll be taken care of in the next changes in this series.
The main target of the meta-agl-profile-core layer is to host:
- a minimal, bootable image with network and package management enabled
-- agl-image-boot
- a minimal image with network and packagemanagement and the AGL APIs
-- agl-image-minimal
The layer meta-agl-profile-graphical is used as superset of these
and includes support for egl+wayland+weston. All recipes concerning
graphics were moved there. This is not a full profile as we still have
to migrate some parts of meta-agl-demo in a follow-up changeset.
The roadmap as discussed during the F2F session in Karlsruhe is:
- week 16 : core profile and profiles w/o graphics
- week 17 : graphical profiles
- week 18 : final conversion of the demo image
v2: moved agl-login-manager from -graphics to -core (see Jose's comment)
v3: moved back after discussion - follow-up in separate changeset
Change-Id: Idacb0d1274baac1f63f8d1b850d4b1104ac33918
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
Jan-Simon Moeller
Scott Murray
Ronan Le Martret
Matt Ranostay
Romain Forlot
Stephane Desneux