aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-profile-graphical-qt5/recipes-qt
AgeCommit message (Collapse)AuthorFilesLines
2020-08-31Remove replaced windowmanager recipes and runxdgJan-Simon Möller2-42/+0
agl-service-windowmanager, libwindowmanager and qlibwindowmanager are deprecated. Runxdg is using these and no longer required. Also remove qtaglextras. Bug-AGL: SPEC-3555 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: I412035ea0e9694aad84aa2e8294b4d52f70f57e4 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25161 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-08-25qtwayland-config: Do not enable by default resize after swap env variableMarius Vlad1-1/+11
In our use-cases applications do not specify a size for the windows, leaving qtwayland itself to create an initial size for the surface (a 500 by 500 size). The compositor will send a configure event back to the application with the available/actual geometry area, resulting in resize performed by the application. This, in tandem with the fact that we tweaked qtwayland to perform the resize (due to SPEC-3334) after a buffer swap results in a short flicker -- the application does an initial commit with that initial size but with no background or any information attached to it. The environmental variable tunes the repainting mechanism in qtwayland affecting the way the resize is performed and was added when multiple or split surfaces are in use. Destroying one of them will not cause a scale back to the original area. We therefore disable by default that environment variable and leave it to the applications to enable it at start-up, if they still want to use split type of surfaces. Added a rather big comment about why that might necessary giving some clues and some mention that qtwayland doesn't make a distinction for the value of the environmental variable itself. Bug-AGL: SPEC-3522 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Ib0dcda6382dd52677a0768afe3948ab62955c9f8 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25120 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-08-25qtwayland-config: Add qtwayland-config recipeMarius Vlad3-9/+23
Migrate from qtwayland bb append recipe to using a config one. Bug-AGL: SPEC-3522 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Suggested-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I24179505f10e02cd09542d2caf28104dc89257c8 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25119 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-06-24Make the agl-compositor the default compositorJan-Simon Möller1-2/+2
This makes the agl-compositor the default starting with Jumping Jellyfish For development purposes, you have these variables at hand to influence the setup: AGL_DEFAULT_WESTONSTART AGL_DEFAULT_WM_SHELL Check your conf/local.conf for details. Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Iceb35375e04f947009800b80511f6360026403fe
2020-05-17qtwayland_%.bbappend: Force resize after buffer swapMarius Vlad1-0/+1
As the qtwayland client will sometimes 'forget' to do a redraw when resizing back to the original geometry force it to happen each time at the end of the EGL buffer swap. Temporary fix until a proper one is done inside qtwayland. Bug-SPEC: SPEC-3334 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: Iabf53065222a5ee803baf8ed146a11dd24a96860
2020-05-13qtwayland_%.bbappend: Migrate the qt shell integration to the properMarius Vlad1-0/+9
place The proper place to choose the qtshell integration is with qtwayland so migrate it there. While at it, upgrade to xdg-shell stable instead of using the unstable v6. Bug-AGL: SPEC-3133 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I67b92cd744c4e34c9a603b9535823d9562d4bdf8
2020-03-12qtlocation: revert Mapbox API calls to 256x256 tilesMatt Ranostay1-1/+1
Newer API uses 512x512 blocks by default, but we need to use 256x256 to avoid tiny font as QtLocation expected the latter sized tiles. Bug-AGL: SPEC-3264 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Change-Id: I12e926fea5c527f7be2f33beb68d67b68a3b7873
2020-03-11qtlocation: add Mapbox patch to use new APIMatt Ranostay2-0/+53
On June 1st the Mapbox Studio Classic API will be disabled, and thus the current QtLocation plugin needs to be updated to allow access to the new API Bug-AGL: SPEC-3264 Change-Id: I3799de4886b83d896d10b2ee97d15f604875b97e Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2020-01-27meta-agl-profile-graphical-qt5: enable qt5location servicesScott Murray1-0/+8
Add bbappend for qt5location to enable the various geoservices providers in its PACKAGECONFIG. They were previously enabled by default, so this is required to yield the same location services support that was present in pre-zeus builds. Bug-AGL: SPEC-2932 Change-Id: Ic797e5d665560f21557b153f95a5d554bca0dc2e Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2020-01-22meta-agl-profile-graphical-qt5: handle qtwayland upgradeScott Murray1-2/+0
Drop apparently no longer required qtwayland build fix patch since it does not apply to the newer version in meta-qt5 zeus branch. Bug-AGL: SPEC-2932 Change-Id: I8b218260da649aac9e5075100c271cf85c6a5c12 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-06-17Bump qtaglextrasKazumasa Mitsunari1-1/+1
This commit includes followings a4d7197 Merge "Use new event for activating window" 171e9dc Fix compile error d21de3d Use new event for activating window 462a0ca Merge "Exposed QMLApplicationEngine from AGLApplication" 26d3b8a Exposed QMLApplicationEngine from AGLApplication c0d77c2 Improve Qt-ness of AGLApplication 02ce712 Add a public feature for wgtpkg-pack Bug-AGL : SPEC-2474 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp> Change-Id: I174142c35ecea4be12d805a3bbf753bc048ccfca
2019-06-06meta-agl-profile-graphical-qt5: Add qtaglextrasScott Murray1-0/+28
Add qtaglextras to meta-agl-profile-graphical-qt5. This is required to fix building the cluster demo SDK now that qtaglextras has been added to packagegroup-qt5-toolchain-target. Bug-AGL: SPEC-2484 Change-Id: Ife540347c4b3912841a9d0e2d895afc458ca904c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-05-23Move hmi-framework and eg-virt from meta-agl-devel to meta-aglJan-Simon Möller2-0/+27
Part of the layer cleanup. Bug-AGL: SPEC-2450 Change-Id: I0e0517c6f5aeaa1378715acde8adda6200119aba Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-04Upgrade to thudScott Murray1-1/+1
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-08-01Remove porter reference from meta-aglRonan Le Martret5-780/+0
* Remove, from recipes, reference to porter, gen2, krogoth. * cleanup mardown from reference to porter. * cleanup markdown (markdownlint score 0). Change-Id: I70b9880fc52ef3c848da588d3a256fa8eee48606 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-05-313rd part of the layer/profile rework [1/2]Jan-Simon Möller22-0/+4072
This is the last larger commit in this series and deals with the graphical part. We introduce the graphical profiles: - meta-agl-profile-graphical -- meta-agl-profile-graphical-html5 -- meta-agl-profile-graphical-qt5 Notable changes: - weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images. - new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds - new image/sdk: agl-image-minimal-crosssdk - agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical. - The wayland-ivi-extension moved to the agl-demo-platform. - The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now. - added and massaged the agl-features. - found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g) Todo: - we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages. For further details, see meta-agl/docs/profiles.md. v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES. v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel) v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane) v5: fix missing packagegroup inclusion v6: explicitely put profile-graphical-qt5 on-top of profile-graphical v7: re-add 'procps' when agl-devel feature is on Bug-AGL: SPEC-145 Change-Id: I24cdcd1118932758d0c55d333338238f2a770877 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>