| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time.
Trim dependencies and move most 'demo' related recipes to meta-agl-demo.
v2: changed to bbapend + .inc , added description
v3: testbuild of all images
v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups.
v5: rebased
v6: merged meta-agl-distro into meta-agl-core,
due to dependency on meta-oe, moved -test packagegroup and -qa images
to own layer meta-agl-core-test
v7: Fixed comments from Paul Barker
v8: Update the markdown files
v9: restore wayland/weston/agl-compositor recipes/appends, reworked to
move app f/w specific changes to bbappends in meta-app-framework and
only demo specific weston-init changes to meta-agl-demo
v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend
Description:
This patch is part 1 out of 2 large patches that implement the layer rework
discussed during the previous workshop. Essentially meta-agl-core is the
small but versatile new core layer of AGL serving as basis for
the work done by the IC and IVI EGs.
All demo related work is moved to meta-agl-demo in the 2nd patchset.
This should be applied together as atomic change.
The resulting meta-agl/* follows these guidelines:
- only bsp adaptations in meta-agl-bsp
- remove the agl-profile-* layers for simplicity
-- the packagegroup-agl(-profile)-graphical and so on
have been kept in meta-agl-demo
- meta-agl-profile-core is now meta-agl-core
- meta-agl-core does pass yocto-check-layer
-- therefore use the bbappend + conditional + .inc file
construct found in meta-virtualization
- meta-agl/meta-security has been merged into meta-agl/meta-app-framework
- meta-netboot does pass yocto-check-layer
- meta-pipewire does pass yocto-check-layer
Migration:
All packagegroups are preserved but they're now enabled by 'agl-demo'.
Bug-AGL: SPEC-3723
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
|
|
Changes include:
- The agl-test-wgt/agl-devel-wgt image features and the scheme of
appending to their FEATURE_PACKAGES definitions turned out to be
problematic with respect to resulting in unexpected extra packages
ending up in agl-image-{minimal,ivi}, etc., when building with
agl-demo configured (which is typical usage). To avoid this, the
FEATURE_PACKAGE definitions for the image features have been
replaced with tweaks to define COMPLEMENTARY_GLOBS for the features
to bring in the test/debug/coverage packages via that mechanism.
- The above removes the need to define the extra test/devel
packagegroups, and requires some minor tweaks to aglwgt.bbclass to
use a -debug package for the debug widget instead of -dbg, to avoid
collisions with the dbg-pkgs image feature. As well, the afb-test
package has been added as to RDEPENDS of all test widget packages,
since that seems sensible and avoids needing to explicitly adding
it elsewhere.
- Attempt to rework the various crosssdk image definitions to use a
layered set of .inc files to remove duplication and ensure that
additions to the SDK are declared once in the appropriate profile.
It is likely that a clean sheet implementation would have some
things coming from meta-agl-profile-graphical, so further rework
may be required/desired to continue cleaning things up.
Bug-AGL: SPEC-3300, SPEC-3375
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I942b61501beb41d037001b70a501f90b9a59c45d
|
|
aglwgt.bbclass changes:
- Made the autobuild/agl/autobuild script a hard requirement, as all
upstream widgets have it, and this is the first step to actually
using it in the class to drive building the widgets after a
subsequent round of autobuild script updates.
- Reworked wgt packaging to simplify the logic and split the test,
debug, and coverage widgets into separate packages to allow
installing them separately.
- The on target install directories for the widgets have been changed
to release, test, debug, and coverage under /usr/AGL/apps, with the
previous logic with respect to the AGLWGT_AUTOINSTALL variable
being retained for the few widgets that need to go into the
manualinstall directory. An "autoinstall" symlink has been added to
point at the release directory to maintain previous behavior.
This should allow a simple path to configuring installation of the
debug or coverage widgets on first boot with future changes.
- Added logic to only assume test widgets exist for recipes with
names starting with "agl-service-". This can be over-ridden by
defining AGLWGT_HAVE_TESTS as "true" in a recipe.
- Added AGLWGT_EXTRA_BUILD_ARGS variable for passing extra arguments
to widget builds. Currently its default value includes the previous
VERBOSE=true that was passed to every autobuild invocation, and
"${PARALLEL_MAKE}" which has been added to improve build speed.
- Added AGLWGT_PACKAGE_WARN variable to control extra warnings
around the existence of test/debug/coverage widgets when packaging.
Once further build rework is done, the default for this will likely
be changed to "true", currently the output is too verbose to do so.
- Removed over-rides to force building of test widget when building
with the agl-ptest feature set, as it is now unnecessary and will
result in an undesired extra copy of the test widget in the release
folder.
Other changes:
- Created new devel and test packagegroup variants for several of the
existing packagegroups to contain the associated widgets.
- Added agl-devel-wgt and agl-test-wgt IMAGE_FEATURES to control the
addition of dbg/coverage and test widgets to images. Additions to
the FEATURE_PACKAGES variables have been added in several places to
add the corresponding widget packagegroups.
- Added the agl-devel-wgt image feature to the agl-devel feature
template definition to match current behavior.
Bug-AGL: SPEC-3300
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I3a28615db94bbc04e30e98ac3dce8cae942a499f
|
|
For the upgrade to YP dunfell/3.1 we need to update the layer
compatibility.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ieb1ac9ef1f48f077c9cd312c4ac295ae1cc062b0
|
|
For the uprev to YP 3.0 zeus we need to update the layer compatibility.
Change-Id: Ib762915305588c39400c3c8343152b4ecbfa4556
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Rework towards agl profiles.
This change is part of a series of changes to create the
AGL profiles.
This set will mainly introduce the 'core' profile.
It is setup to be a drop-in change, thus some files were kept
in (dummy) locations for now.
However, they'll be taken care of in the next changes in this series.
The main target of the meta-agl-profile-core layer is to host:
- a minimal, bootable image with network and package management enabled
-- agl-image-boot
- a minimal image with network and packagemanagement and the AGL APIs
-- agl-image-minimal
The layer meta-agl-profile-graphical is used as superset of these
and includes support for egl+wayland+weston. All recipes concerning
graphics were moved there. This is not a full profile as we still have
to migrate some parts of meta-agl-demo in a follow-up changeset.
The roadmap as discussed during the F2F session in Karlsruhe is:
- week 16 : core profile and profiles w/o graphics
- week 17 : graphical profiles
- week 18 : final conversion of the demo image
v2: moved agl-login-manager from -graphics to -core (see Jose's comment)
v3: moved back after discussion - follow-up in separate changeset
Change-Id: Idacb0d1274baac1f63f8d1b850d4b1104ac33918
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
Jan-Simon Moeller
Scott Murray