Age | Commit message (Collapse) | Author | Files | Lines |
|
Rework towards agl profiles.
This change is part of a series of changes to create the
AGL profiles.
This set will mainly introduce the 'core' profile.
It is setup to be a drop-in change, thus some files were kept
in (dummy) locations for now.
However, they'll be taken care of in the next changes in this series.
The main target of the meta-agl-profile-core layer is to host:
- a minimal, bootable image with network and package management enabled
-- agl-image-boot
- a minimal image with network and packagemanagement and the AGL APIs
-- agl-image-minimal
The layer meta-agl-profile-graphical is used as superset of these
and includes support for egl+wayland+weston. All recipes concerning
graphics were moved there. This is not a full profile as we still have
to migrate some parts of meta-agl-demo in a follow-up changeset.
The roadmap as discussed during the F2F session in Karlsruhe is:
- week 16 : core profile and profiles w/o graphics
- week 17 : graphical profiles
- week 18 : final conversion of the demo image
v2: moved agl-login-manager from -graphics to -core (see Jose's comment)
v3: moved back after discussion - follow-up in separate changeset
Change-Id: Idacb0d1274baac1f63f8d1b850d4b1104ac33918
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The user was not set to the expected value because the patched
file had not indication of user. This fix enforce the setting
of the user. It also enforce the setting of the group.
Bug-AGL: SPEC-546
Change-Id: I929bfa17c541c5334f463cd8cb3566dc5b53b408
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
* We need to add systemd udev device unit dependency to weston,
If the system is slow udev rules is up when weston want to start,
if the system is fast, udev rules may be down when weston want to start.
* TAG+="systemd" create a systemd device unit
* ENV{SYSTEMD_WANTS}="weston.service" add dependency (Like BindsTo).
Bug-AGL: SPEC-603
Change-Id: I45d6513ea64cd071a60b53afd98d782e9300cefa
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10111
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
|
|
v2:
When gst-record is included DISTRO_FEATURES, "--gst-record" is set.
Bug-AGL: SPEC-559
Change-Id: Ia172135f355a98bb10234743cdd1a7b1319723e7
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9823
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-704
This is part of the fixe to make i.MX6 buildable again.
Following fixes are included in this change:
- adding build target imx6qsabreauto
- fixing qt5.8 build error
- refine bblayers.conf layer order (for dynamic-layers)
- meta-fsl-arm -> meta-freescale layer name change
- weston.ini lines (use fbdev-backend.so)
- /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules)
- kernel configuraion to include smack, etc.
Follwings are stil not addressed yet:
- bblayer.conf layer order still have issue re. dynamic-layers
- built and booted on imx6qsabreauto only yet.
following existing community boards may need update
(i have imx6qsabrelite, but no notrogen6x)
Note, this fix is prepared independently of nxp or fsl-community,
who should follow-up if there are mistakes to be fixed, or updates
that they find needed.
Update:
Refined on review comment regarding tune settings and
kernel configurations. The board successfully boots and shows
AGL homescreen.
But I found I still have problem with USB.
lsusb says 'unable to initialize libusb: -99' error which I am
still faling to find the cause.
Update2:
usb issue may be related to dtb configuration in linux-fslc-imx
better to be tracked separately
Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574
Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9871
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-559
some /dev module should be grant to access as display user.
When weston use gst-record, it accesses some /dev driver
as display user.
Change-Id: Ifc3ab94282d2857d48cfd5673c3eab944badddf3
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9821
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* Create a user/group display
* Allow weston to start without mandatory root user
* start weston-terminal for each user
Bug-AGL: SPEC-546
Change-Id: Id50acdbf5f7c07d5e0440575d42998b8819b5547
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9135
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Dominig ar Foll <dominig.arfoll@fridu.net>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* weston.service should not be a part of weston recipes
* remove weston.service from AGL weston recipes
* yocto upstream uses the recipe weston-init to startup weston
* customize weston-start with sed
- remove openvt
- add option to weston-launch
* customize weston.service with sed
- add option for weston
* unified the weston startup beteween AGL BSPs
* remove fix on the AGL BSP
Bug-AGL: SPEC-452
Bug-AGL: SPEC-310
Change-Id: I12722826abdc004214d289961e900c36528ec6e3
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|