| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Switch to scarthgap in LAYERSERIES_COMPAT in layer.conf files.
Bug-AGL: SPEC-4578
Change-Id: I225d12355ad7684170d0a2054105d3de5214430b
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Switch to nanbield in LAYERSERIES_COMPAT in layer.conf files.
Bug-AGL: SPEC-4578
Change-Id: I11b528374d60caa8c62b95b6ef0c857f35b720f6
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Switch to mickledore in LAYERSERIES_COMPAT in layer.conf files.
Bug-AGL: SPEC-4578
Change-Id: I6363128896c27a713f7dd59c8a889306a2a04912
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28366
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Switch to langdale in LAYERSERIES_COMPAT in layer.conf files.
Bug-AGL: SPEC-4578
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I2c690c02a55bb0ddca9231bdf405a5f21486db3f
|
|
Ensure the layers do pass again and that the scripts are up-to-date.
Bug-AGL: SPEC-4680
Bug-AGL: SPEC-4681
Bug-AGL: SPEC-4682
Bug-AGL: SPEC-4683
Bug-AGL: SPEC-4684
Change-Id: I5ab1bc49dc361a7fc30a62c5c82d286e66bad72e
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28875
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Changes:
- Add logic to init.sh to handle autorelabeling the root filesystem
if it is tagged as requiring it. In practice this should only be
required when booting images built on hosts that have xattr support,
or if relabeling is manually triggered on subsequent boots. There
was a stated goal of avoiding the reboot from the later userspace
handling of autorelabeling in CI, so this hook aims to enable that
for the non-xattr build host corner case.
- Add a resolv-conf-relabel recipe that installs a systemd unit to
relabel /etc/resolv.conf when netbooting. This is required because
the file always gets modified inside init.sh, and it does not seem
worthwhile to always do the extra policy load required to relabel it
in the initramfs. This may need to be revisited if it proves
difficult to handle denials in early booting when netbooting.
- Add the required extra packages for relabeling to IMAGE_INSTALL.
Bug-AGL: SPEC-4332
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I26b27c1cea68a029264352bd206c160cac3d451e
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27791
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
make them more standardized
Bug-AGL: SPEC-4374
Signed-off-by: duerpei <duep.fnst@fujitsu.com>
Change-Id: Ie11168254ab76acd11382b33501fb4881710a5bf
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27479
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
An increasing number of advanced systemd features with respect to
immutable systems and sandboxing are effectively dependent on the
usrmerge distro feature, so it seems reasonable to enable it since
upstream AGL currently requires systemd usage. See SPEC-4352 for
more detailed discussion of rationale.
Changes:
- Add usrmerge to AGL_DEFAULT_DISTRO_FEATURES in poky-agl.conf.
- Add workarounds via bbappends in meta-agl-bsp for the assumption
of using /lib instead of ${nonarch_base_libdir} in various
meta-rcar-gen3 kernel module recipes. This will be followed up
with upstream to hopefully fix the recipes.
- Replaced some explicit /sbin usage with ${sbindir} in the
initramfs-netboot recipe used by the agl-netboot feature to avoid
packaging errors.
Bug-AGL: SPEC-4352
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ibc0ae1e2628aca6474401e0852bbb97085f4ecfa
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27437
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
The upstream Yocto compatibility checking now looks for "patch"
and "maintainer" in layer README files, add some documentation
in affected layers to avoid failures on the Yocto autobuilder.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I779546316198530888788772f9355e93ea325782
|
|
For tracking upstream, we need to update the layer compatibility.
Bug-AGL: SPEC-3819
Change-Id: Ic1bc22653e59b2891d77d44cdd409a805e5cc332
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
During the last workshop the transition to the new framework was presented.
This change essentially deprecates the SMACK-based application framework.
To prepare the integration of it, we remove the deprecated components:
- meta-agl-core: remove Smack kernel patches
- meta-app-framework
- meta-pipewire/dynamic-layers/meta-app-framework/
v2: rebased
Bug-AGL: SPEC-4121
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: Icdaeadfb5d2193f3a4c535168c88da6073423e67
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26752
|
|
* rename the dts/dtsi file, the new BSP 5.5.0 change the file name of
the dts file.
* update the driver files hash
* Add "meta-yocto-bsp" to BBLAYERS, it's new dependency of meta-renesas.
Bug-AGL: SPEC-4081
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I53b71906e7174d7b1153a6912f7181171730147c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26703
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
This is mostly the result of running a slightly customized version
of the convert-overrides.py script from poky with additional
overrides added. A few minor fixups were done by hand afterwards
during a review of the changes.
The intent of these changes is to minimize the effort to keep the
"next" branch that builds against poky master up to date and tested
in preparation for the switch to the next Yocto LTS release in
early 2022.
Bug-AGL: SPEC-4052
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
agl-netboot provides the environment for booting in CI. There we do rely on curl to
be present on the target. Thus make this a requirement for agl-netboot.
Bug-AGL: SPEC-4013
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I547481c9c2042a49d3a3ad4fd0200a264a6770fe
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26487
|
|
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time.
Trim dependencies and move most 'demo' related recipes to meta-agl-demo.
v2: changed to bbapend + .inc , added description
v3: testbuild of all images
v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups.
v5: rebased
v6: merged meta-agl-distro into meta-agl-core,
due to dependency on meta-oe, moved -test packagegroup and -qa images
to own layer meta-agl-core-test
v7: Fixed comments from Paul Barker
v8: Update the markdown files
v9: restore wayland/weston/agl-compositor recipes/appends, reworked to
move app f/w specific changes to bbappends in meta-app-framework and
only demo specific weston-init changes to meta-agl-demo
v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend
Description:
This patch is part 1 out of 2 large patches that implement the layer rework
discussed during the previous workshop. Essentially meta-agl-core is the
small but versatile new core layer of AGL serving as basis for
the work done by the IC and IVI EGs.
All demo related work is moved to meta-agl-demo in the 2nd patchset.
This should be applied together as atomic change.
The resulting meta-agl/* follows these guidelines:
- only bsp adaptations in meta-agl-bsp
- remove the agl-profile-* layers for simplicity
-- the packagegroup-agl(-profile)-graphical and so on
have been kept in meta-agl-demo
- meta-agl-profile-core is now meta-agl-core
- meta-agl-core does pass yocto-check-layer
-- therefore use the bbappend + conditional + .inc file
construct found in meta-virtualization
- meta-agl/meta-security has been merged into meta-agl/meta-app-framework
- meta-netboot does pass yocto-check-layer
- meta-pipewire does pass yocto-check-layer
Migration:
All packagegroups are preserved but they're now enabled by 'agl-demo'.
Bug-AGL: SPEC-3723
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
|
|
README refers to some raddr and rfile (the initrd address
and the file to load). Copy-pasta them into u-boot would
boot correctly.
Bug-AGL: SPEC-3439
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I09b4cadd59be4a40371f35d71708cd59c38bc7f4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24790
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
For the upgrade to YP dunfell/3.1 we need to update the layer
compatibility.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ieb1ac9ef1f48f077c9cd312c4ac295ae1cc062b0
|
|
We re-use the OpenEmbedded / Yocto Project style to
declare the licenses more prominently in the top level folders.
LICENSE is derived from poky's LICENSE file.
Bug-AGL: SPEC-3295
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I059b5b42beb0d422ad2e679e958588240b5d8989
|
|
Use -persist option for nbd.
Bug-AGL: SPEC-3221
Bug-AGL: SPEC-3232
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: Ia2eb94eeb3882b6546ebe9df04befdd42c99bd15
|
|
For the uprev to YP 3.0 zeus we need to update the layer compatibility.
Change-Id: Ib762915305588c39400c3c8343152b4ecbfa4556
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
These changes allow images built for the intel-corei7-64 machine to be
booted under qemu (by using the normal `runqemu` command) and vmware or
virtualbox after a build. Functionality on real hardware should not be
compromised.
Bug-AGL: SPEC-2931
Change-Id: If25782bf59e145cab32a4c9a0e39b599106ce7cc
Signed-off-by: Paul Barker <pbarker@konsulko.com>
|
|
- yocto zeus QA check tab in recipes.
Replace tab by spaces is mandatory in yocto zeus.
Bug-AGL: SPEC-2932
Change-Id: I7776d4e72888114ab42e5c287971e8242885fe99
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This patch changes the method to detect the current network interface
used for netboot. Instead of using the 'ip' command, it parses the content
of /sys/class/net/* to detect the first running ethernet interface.
Two new messages are now visible on the console in initramfs phase:
--------------------------------------------------
/sbin/init[1]: find_active_interface: first active interface is eth0
/sbin/init[1]: Adjusting Connman command line. Will be: 'connmand -r -n -I eth0'
--------------------------------------------------
Background:
When booting using netboot, it's necessary to update connman command line
options to ignore the network interface used for NBD connection.
For this, the initramfs script tries to detect the interface in use by
running 'ip -o link show state'.
'ip' command comes with iproute2 package but for various reasons, some AGL
images like m3ulcb-nogfx don't have iproute2 installed. In this case, the
'ip' command is implemented by busybox, which doesn't support the '-o' option.
This leads to issues when running connman as the command line is not properly
updated.
Bug-AGL: SPEC-2921
Change-Id: I5691f04ab462a148219b741d235247a2bfbc2e24
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
- AGL support now nbd v3 protocol for net booting.
Change-Id: If7b9cd261115de5aa9133ccf926647edf483b08a
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
When using netboot, the kernel is responsible for establishing the IP connection.
For this reason, connman is instructed to "forget" this boot interface and
/etc/resolv.conf is generated by the initrd script (from /proc/net/pnp).
This patch removes the previously set SMACK label 'System' so file has label _,
which makes it readable by any process.
Bug-AGL: SPEC-2640
Change-Id: I13704827434a795aab2264755dc01ec796be8847
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
When using netboot, the initrd script mounts /tmp and /run before pivoting on
the new rootfs and then running systemd. As a consequence, systemd doesn't try
to remount /tmp or /run (and the correct smack labels are not applied on /tmp
and /run, leading to many issues).
This patch unmounts /tmp and /run just before running systemd which will
then mount them with correct labels.
Bug-AGL: SPEC-2596
Change-Id: I4cd7b67f04c232a6e48c777fb5fefa6c46f6744a
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Add a new cmdline argument using option 'nbd.v3' that could be parsed by the initrd
script used for netboot.
Bug-AGL: SPEC-1423
Change-Id: I1cd189c343672631feda5bcee2e393eb46b9d000
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
* Remove, from recipes, reference to porter, gen2, krogoth.
* cleanup mardown from reference to porter.
* cleanup markdown (markdownlint score 0).
Change-Id: I70b9880fc52ef3c848da588d3a256fa8eee48606
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
The profiles need a clear priorization of the layers.
Especially the core layers need a high prio in this context.
Apply a prio of 70 to core/essential layers and of 60 to BSP, netboot and smack.
Change-Id: I24a59daadab4c98ffbcb799cc784e84e87ac7d23
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The db410c build uses IMAGE_FSTYPES_append
which is a bad idea and should be changed to
IMAGE_FSTYPES ?=
Anyway - add a hotfix directly in the recipes.
Change-Id: I163e4fdccfc890085cf98571dcf5d7bf21cffadd
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
vmdk image type is changed to wic.vmdk in upstream.
(From Poky rev: 9d07c736e39a9aa922630b4241eda185a19a11ea)
(From OE-Core rev: 929ba563f1bc7195c4981b8e139c432b2cc388ea)
Bug-AGL: SPEC-1181
Change-Id: I94fab8ce4d075776b5f72d1c270a333d6b34a4b7
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
|
|
Integrated image_types_uboot into image.bbclass
(From Poky rev: e18cec750b51267d9c130b395c7a53585f4ae7ac)
(From OE-Core rev: 65f27122950a35a67ce39ae4cfe93d0dca6b0dab)
Bug-AGL: SPEC-1181
Change-Id: Idbb0d4fe65fc1cabf0aab24857b72c5341c06df9
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
|
|
The provided config now allows to switch from netboot to sdcard
boot at runtime by changing a uboot variable.
Change-Id: I778f46f65ca007dbdd5ae070e946c04b7277ddeb
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11745
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
- All kernel recipes must inherit linux-agl.inc
- All kernel recipes for a given version (e.g. 4.9) should include
linux-VER-agl.inc in order to avoid duplication (such as the SMACK
label patch or security fixes)
- We enforce having merge_config.sh be invoked at the end, in order to
make sure fragments will be applied.
- Add a new fragment for Raspberry Pi to ensure the Pi Touchscreen is
still enabled.
With all of the above, we fix a number of minor issues as well, such as
platforms manually enabling NBD/RAMDISK for netboot as the previous
logic was not working in all cases.
Bug-AGL: SPEC-946
Change-Id: Ic688e899df5861d83712af12d8e1c6c3c9643300
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12063
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
As part of the pyro merge we need to continue to overlay these classes
in order to support vmdk.xz. While upstream has some of the underlying
required changes, we had dropped 'vmdk' as a standalone image type and
now have 'wic.vmdk' there. This was too invasive for pyro however.
This in turn means that we carry vmdk.xz support here.
Another part of this is that in some places we were checking only for
the string vmdk but also need to check for the string vmdk.xz as well.
Update these locations to use bb.utils.contains_any so that we can catch
both easily.
Bug-AGL: SPEC-899, SPEC-775, SPEC-776
Change-Id: I0cc3c06d59c97c0a76819209e313bc6f5495cc31
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11153
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
qemu images for 64-bit x86 doesn't generate a u-boot image
however netboot does by default. Fix this issue by checking for
vmdk in image types.
Change-Id: I061d61c87c6be9c16a04926d56b0825a3eedde04
Bug-AGL: SPEC-513
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10125
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
This changeset fixes the case of the rpi-sdimg which was broken
by the IMAGE_FSTYPE setting introduced in poky-agl.conf (distro-wide).
A new variable AGL_EXTRA_IMAGE_FSTYPES is available now and only used
in AGL (target) images.
Reasoning for this solution:
- any modifications to IMAGE_FSTYPES will also affect things like the initramfs or initrd images.
- we minimized the disk-space requirements by reusing the ext4.xz for the rpi-sdimg
Bug-AGL: SPEC-492
Change-Id: I07fd51dbcf334653cd6033b7ccb663c4d4ed8578
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9887
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
This changeset enforces the same output images across all boards
to be ext4.xz and tar.xz . No exceptions.
Reasons: disk space, unification of instructions, download size
Bug-AGL: SPEC-492
Change-Id: I41c92ba1d92a6e5854cea470eea6e0b559945d5d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9813
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
More room is needed when installing debug packages or
big components like Chromium.
Also, IMAGE_ROOTFS_EXTRA_SPACE was overridden by another unidentified
configuration file or recipe: the setting is now forced. Consequently,
the extra space must be reduced specifically for initrd.
Change-Id: Id9b7659197c0840c04bce048a7bb1d96c77f3cc9
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9779
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I2f399257708bc7b44e9961ce9cebfbc55eaee899
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9723
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I961a0c9fa188fffa830927a2c78f205c765a7491
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
* Having a minimlal local.conf serving the only purpose
of user customization is the "Yocto" way of doing things
* After a source synchronization (repo sync), feature code
must be update without regenerate local.conf
Change-Id: I0bb0861f4c07a8b57cb59a03f6ffe9d2d693cbbe
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
|
|
Change-Id: I9b512a907398de9c96dc46111c74bed4059f7b8e
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
|
|
The live images use now INITRD_IMAGE_LIVE and INITRD_LIVE variables to
specify the name for the initramfs image to build and add to hdd image.
Change-Id: I5593e0cb978db8e9cecb283804c9c6e65a34a57f
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Bug-AGL: SPEC-250
Change-Id: I76fbc1d8674807c247bb4aaadd70d71a13097491
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
|
|
Change-Id: I5867a08162b1d9405c769c25d066c2d1e813bca8
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
NBD and Ramdisk support are required in the kernel to have
the root filesystem mounted as an NBD device:
* ramdisk is required to load the initrd (not an initramfs)
* NBD is required to mount the root device from a remote NBD server
Change-Id: Ib726714adfb549eaeb21f96e7bf874290e700a8b
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Change-Id: I7486c7b785673f0833409267f52db5c09663fcba
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
To enable the build of network bootable images, the following line must be
added to conf/local.conf:
INHERIT += "netboot"
This layer contains recipes for the following components:
* busybox: activate the built-in NBD client
* initramfs-netboot: contains the init script started by the kernel,
responsible for mounting the remote root filesystem then pivoting and
exec'ing systemd
* initramfs-netboot-image: image to specify for building the initrd
More details are available in meta-netboot/README.
Bug-AGL: SPEC-175
Change-Id: Id2328dd9233d238cde77311e64e58344be244988
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
Denys Dmytriyenko
Scott Murray
Jan-Simon Moeller
duerpei
Ronan Le Martret
Marius Vlad
Paul Barker
Stephane Desneux
Changhyeok Bae
Tom Rini
Matt Ranostay
Romain Forlot
Anton Gerasimov