summaryrefslogtreecommitdiffstats
path: root/meta-pipewire/recipes-multimedia/pipewire
AgeCommit message (Collapse)AuthorFilesLines
2023-11-07pipewire: Update PipeWire to v0.3.83 and WirePlumber to v0.4.15Ashok Sidipotu2-2/+6
Highlights of Pipewire. - Add BAP broadcast source and sink support. - Vulkan DMA buf support was merged. - Fix a leak in the SBC codecs for SCO. - More bugfixes and improvements. - IRQ based scheduling in ALSA was improved and enabled by default for Pro-Audio profile. It will also link the pcms together to get lower latency. This now matches what JACK does and results in equal latency for Pro-Audio profiles. - A new L permission was added to make it possible to force a link between nodes even when the nodes can't see each other. - Libcamera and v4l2 devices now have properties so that duplicates can be filtered out by the session manager. - Improve RAOP compatibility. - ALSA hires timestamps are now disabled by default. Highlights of Wireplumber. - A new "DSP policy" module has been added; its purpose is to automatically load a filter-chain when a certain hardware device is present, so that audio always goes through this software DSP before reaching the device. This is mainly to support Apple M1/M2 devices, which require a software DSP to be always present - WpImplModule now supports loading module arguments directly from a SPA-JSON config file; this is mainly to support DSP configuration for Apple M1/M2 and will likely be reworked for 0.5 Bug-AGL: SPEC-4940 Change-Id: I7caa7b08686704cc94be896bcd0c2269ab3c8133 Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29388 Tested-by: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> ci-image-boot-test: Jenkins Job builder account ci-image-build: Jenkins Job builder account
2023-04-04pipewire: Update pw to v0.3.67 and wp to v0.4.14Ashok Sidipotu3-123/+8
Highlights of Pipewire. - The loopback module and other couples streams will now not randomly fail in some cases. (#3028). - PipeWire can now generate a limits.d config file with our recommended settings for priorities and memlock. - Add back the deprecated symbols but make sure a deprecated warning is emitted for them. This fixes compilation issues in bindings. - Clear old buffer memory on ports to fix some SIGBUS errors. - Fix a critical bug that causes audio distortion in some cases when using. AVX2. Highlights of Wireplumber. - Added bluetooth SCO (HSP/HFP) hardware offload support, together with an example script that enables this functionality on the PinePhone. - WirePlumber now maintains a stack of previously configured default nodes and prioritizes to one of those when the actively configured default node becomes unavailable, before calculating the next default using priorities (see !396). - The libcamera monitor is now enabled by default, so if the libcamera source is enabled in PipeWire, cameras discovered with the libcamera API will be available out of the box. This is safe to use alongside V4L2, as long as the user does not try to use the same camera over different APIs at the same time. - Added i18n support to be able to translate some user-visible strings. Bug-AGL: SPEC-4732 Change-Id: Ie2f9cb99b4594d21e5c2acd092fe54e93d067410 Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28590 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-05-31pipewire: Fix recipe style errorduerpei1-1/+1
The bitbake recipe has style guide at https://www.openembedded.org/wiki/Styleguide In do_install Don't use mkdir to create destination directories, use install -d instead. Bug-AGL: SPEC-4401 Signed-off-by: duerpei <duep.fnst@fujitsu.com> Change-Id: Iaf33b842321e0199aee7227077520a12a9a53d74 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27562 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-03-30pipewire: remove old meson compatibility patchesScott Murray15-3785/+40
Remove accumulated patches to PipeWire that allowed building it with the older meson in dunfell, as they break building it newer meson in poky master/kirkstone. A fix contained in one of those patches for installing the systemd system unit has been reworked and added as a new separate patch. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I949875339b500c9ccd8590a635f7734158617579
2022-03-24pipewire: Backport crash fixScott Murray2-0/+121
Backport revert done post-0.3.47 to fix crashes seen in MPD. See upstream discussion here: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2147 Bug-AGL: SPEC-4294 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I48bf5bc632ad50daa43a3e8125ec8885f7f3a537 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27297 Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com> Reviewed-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-03-05pipewire: Update pw to v0.3.47 and wp to v0.4.8Ashok Sidipotu16-261/+2484
Highlights of Pipewire. - Removed check and warnings to catch leaked listeners on the proxy. - Fix critical bug where alsa devices would not show when the kernel was compiled without VERBOSE_PROCFS - Almost all limits on number of ports, clients and nodes are removed. - Many more bug fixes and imporovements. Highlights of Wireplumber. - Added bluetooth profile auto-switching support between A2DP and HFP modes - Better default audio sources and sinks selection - Backported a fix for a known issue with selecting the default devices on top of 0.4.8 (ae6c9a5e) - Many more bug fixes and imporovements. Change-Id: Id5414aed065593893a237437a8c77645cbf15804 Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27220 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-02-07pipewiresink: set a default channel map if the number of channels is fixedAshok Sidipotu2-0/+78
-This allows remaping streams using pipewiresink to match the channel layout of the target device Bug-AGL: SPEC-4241 Change-Id: I4090187dc9977fc3d0ee440b601cb95f6864a9cf Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27130 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-01-30pipewire: update to pw 0.3.43 and wp 0.4.7Ashok Sidipotu6-21/+1422
Change-Id: I3e478f5e1215d128f0d76ffb2b18c278d90de266 Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27022 Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-12-22pipewire: update to pw 0.3.40 and wp 0.4.5Ashok Sidipotu6-227/+99
Change-Id: Ie9e3fd0a67e6a5fa38543cb9b4cc54f2e0555813 Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27040 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-08-23Convert to new override syntaxScott Murray2-49/+49
This is mostly the result of running a slightly customized version of the convert-overrides.py script from poky with additional overrides added. A few minor fixups were done by hand afterwards during a review of the changes. The intent of these changes is to minimize the effort to keep the "next" branch that builds against poky master up to date and tested in preparation for the switch to the next Yocto LTS release in early 2022. Bug-AGL: SPEC-4052 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-07-02pipewire: fix timerfd deadlock issueGeorge Kiagiadakis3-0/+88
Bug-AGL: SPEC-3957 Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com> Change-Id: I5f41e4161b281473cebc3cb3d8e27c2c93b457be Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26470 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-24Update license handling for pipewire recipeJan-Simon Moeller1-4/+22
We need to set LICENSE to multiple (MIT & GPL-2.0-only & LGPL-2.1-or-later) to satisfy the current scheme required by bitbake. But the licenses of the output packages are not all 3, but mostly MIT and a few LGPL-2.1-or-later and one GPL-2.0-only. To map the dynamically created output packages with the proper MIT license, we need to call setVar after all dynamic packages are created. Bug-AGL: SPEC-3844 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I0900902af2527254869c125ec90239c9afb26f3c Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26449 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
2021-06-23pipewire: fix alsa virtual device to work againGeorge Kiagiadakis2-0/+142
* Install symlinks to the configuration files in /etc/alsa/conf.d * Add patch from pipewire master to support roles on the virtual alsa device Bug-AGL: SPEC-3822 Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com> Change-Id: Ie411df23390754e2cdc494657eb9881771b8c401 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26447 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-21pipewire: update to pw 0.3.30 and wp 0.4.0George Kiagiadakis4-108/+30
* The pipewire recipe has been synced with the upstream yocto one * WirePlumber configuration now has volume ducking enabled for navigation messages. This means that music will now duck when a navigation message plays instead of being corked. * PipeWire's default configuration now lives in /usr/share/pipewire, with the possibility to override it in /etc/pipewire. This allows resetting to upstream defaults by removing /etc/pipewire v2: add licenses to the layer to match the upstream recipe, adapt licenses of sub-packages v3: mark each package with the desired license instead of the mix v4: simplify the license output of the sub-packages Bug-AGL: SPEC-3844 Change-Id: I7a15ddb503d5b064f244c8a42a1aafb4caa1d46a Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com> Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26426 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2021-05-10pipewire: backport pipewiresink patches to fix stuttering and other issuesGeorge Kiagiadakis3-0/+90
Bug-AGL: SPEC-3900 Change-Id: Ib93772c58b4177b8e72713e4d395c9244732e907 Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26338 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-05-10pipewire: update to 0.3.27George Kiagiadakis2-1/+1
Bug-AGL: SPEC-3900 Bug-AGL: SPEC-3844 Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com> Change-Id: I36eba1a6ad1342351b668360c2c812f0a9bb3632 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26333 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-04-26meta-pipewire: update to pipewire 0.3.25 and wireplumber masterGeorge Kiagiadakis13-1818/+289
Bug-AGL: SPEC-3844 Change-Id: Ie32bfa43bf078c7d218d3150dc616501b8848bd0 Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26094 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-17SPEC-3723: restructure meta-aglJan-Simon Moeller8-163/+0
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time. Trim dependencies and move most 'demo' related recipes to meta-agl-demo. v2: changed to bbapend + .inc , added description v3: testbuild of all images v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups. v5: rebased v6: merged meta-agl-distro into meta-agl-core, due to dependency on meta-oe, moved -test packagegroup and -qa images to own layer meta-agl-core-test v7: Fixed comments from Paul Barker v8: Update the markdown files v9: restore wayland/weston/agl-compositor recipes/appends, reworked to move app f/w specific changes to bbappends in meta-app-framework and only demo specific weston-init changes to meta-agl-demo v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend Description: This patch is part 1 out of 2 large patches that implement the layer rework discussed during the previous workshop. Essentially meta-agl-core is the small but versatile new core layer of AGL serving as basis for the work done by the IC and IVI EGs. All demo related work is moved to meta-agl-demo in the 2nd patchset. This should be applied together as atomic change. The resulting meta-agl/* follows these guidelines: - only bsp adaptations in meta-agl-bsp - remove the agl-profile-* layers for simplicity -- the packagegroup-agl(-profile)-graphical and so on have been kept in meta-agl-demo - meta-agl-profile-core is now meta-agl-core - meta-agl-core does pass yocto-check-layer -- therefore use the bbappend + conditional + .inc file construct found in meta-virtualization - meta-agl/meta-security has been merged into meta-agl/meta-app-framework - meta-netboot does pass yocto-check-layer - meta-pipewire does pass yocto-check-layer Migration: All packagegroups are preserved but they're now enabled by 'agl-demo'. Bug-AGL: SPEC-3723 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
2020-08-31meta-pipewire: additional improvements for iMX8MQWalter Lozano3-0/+146
Include additional improvement related to iMX8MQ, which should help to mitigate audio issues. First, add a warning if not all the committed data is actually read/written. Secondly, if snd_pcm_hw_params_is_batch == 1 tweak the delay to make sure at least a period is available in the buffer to avoid xrun. Bug-AGL: SPEC-3410 Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Change-Id: Ief2e69960b3e13c1d5085581d1a7c7b3e73570c0 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25164 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-08-19meta-pipewire: improve audio on iMX8MQWalter Lozano2-0/+36
As a an initial step to solve audio issues on iMX8MQ add a patch to reduce the period_size and in that sense have better control about buffers usage. Bug-AGL: SPEC-3410 Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Change-Id: I0125515fc7ef6f0c9dbd6336d56d348d41f9115f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25093 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-06-26Move meta-agl-profile-graphical-html5 and meta-pipewire into the main layerJan-Simon Möller16-0/+1799
Reasoning: - the profile-graphical-html5 belongs in the main layer - meta-pipewire is enabled by default For reference - the original location is: https://gerrit.automotivelinux.org/gerrit/gitweb?p=AGL%2Fmeta-agl-devel.git;a=commit;h=8479cd0c37e5e5e207a16f21c864610103e4f20f Bug-AGL: SPEC-3453 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Ib475331bb6f84437020728fbb3f17b4acaab0106 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24875 Reviewed-by: Scott Murray <scott.murray@konsulko.com>