| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Highlights of Pipewire.
- Add BAP broadcast source and sink support.
- Vulkan DMA buf support was merged.
- Fix a leak in the SBC codecs for SCO.
- More bugfixes and improvements.
- IRQ based scheduling in ALSA was improved and enabled by default for
Pro-Audio profile. It will also link the pcms together to get lower
latency. This now matches what JACK does and results in equal latency
for Pro-Audio profiles.
- A new L permission was added to make it possible to force a link between
nodes even when the nodes can't see each other.
- Libcamera and v4l2 devices now have properties so that duplicates can be
filtered out by the session manager.
- Improve RAOP compatibility.
- ALSA hires timestamps are now disabled by default.
Highlights of Wireplumber.
- A new "DSP policy" module has been added; its purpose is to automatically
load a filter-chain when a certain hardware device is present, so that
audio always goes through this software DSP before reaching the device.
This is mainly to support Apple M1/M2 devices, which require a software
DSP to be always present
- WpImplModule now supports loading module arguments directly from a SPA-JSON
config file; this is mainly to support DSP configuration for Apple M1/M2
and will likely be reworked for 0.5
Bug-AGL: SPEC-4940
Change-Id: I7caa7b08686704cc94be896bcd0c2269ab3c8133
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29388
Tested-by: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
|
|
The monitor scans for the V4L2 camera devices and registers
pipewire device nodes for them.
This effectively enables AGL to talk to cameras.
Bug-AGL: SPEC-4881
Change-Id: Ia1d989da229304b1b514d6b25ebbc2530503d370
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29117
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Remove the use of a systemd user session to align with how upstream
runs Weston, and to allow using all systemd sandboxing features with
the compositor and homescreen, launcher, etc. applications. The
changes for this touched enough packagegroups and images that further
rework was done to address some of the cleanup described in SPEC-4813,
see below for details.
Changes:
- Remove agl-session and update various recipes that were manually
adding dependencies to the user session it created. The compositor
(be it weston or agl-compositor) and Wayland clients now run in the
system session as non-root users.
- Revive agl-users recipe, this time living in meta-agl-core, with
the purpose of creating the agl-driver user. For simplicity,
agl-compositor is always run as the agl-driver user, as opposed to
trying to wrangle running it as different users depending on build
configuration. This can potentially be made more configurable if a
downstream user has a usecase to be able to specify another user.
- Fully split agl-compositor's systemd unit with a tweaked fork of the
weston-init recipe and unit which lives in meta-agl-core. This will
be easier to maintain than the attempt to reuse weston-init for
builds without meta-app-framework that was done previously.
- Create packagegroup-agl-graphical-compositor, distinct from the
weston packagegroup. This should make it more straightforward for
downstreams that want agl-compositor or weston.
- Rename agl-image-agl-compositor to agl-image-compositor to remove
redundancy.
- Tweak the logic for the inclusion of a few debug packages (e.g.
agl-shell-activator) to ensure they only show up in images when
agl-devel is enabled.
- Split weston-terminal and the required icon resources into separate
packages in our weston bbappend to avoid pulling in weston just to
get the terminal for testing.
- Add a agl-core-image.bbclass to use as a base for images.
- Move our cross-SDK configuration to a agl-crosssdk.bbclass to ease
reuse.
- Remove various empty packagegroups.
- Unify image .inc files with their .bb files as a simplification,
and to move towards more how upstream Yocto Project does things.
- Split pipewire tools into their own -devel packagegroup.
- Remove rcar3 additions to packagegroup-agl-graphical-multimedia, as
that packagegroup is not machine-specific. They will be added back
in via a change in meta-agl-demo. If a downstream user desires a
platform-specific packagegroup for such packages in meta-agl-core,
this can be revisited, though a different implementation should be
used.
- Replace some :append usage with += to avoid creating problems
for downstream users.
Bug-AGL: SPEC-4714, SPEC-4813
Change-Id: I55b29bf749f0d5d50993a362c665bce62b785f67
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28996
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Ensure the layers do pass again and that the scripts are up-to-date.
Bug-AGL: SPEC-4680
Bug-AGL: SPEC-4681
Bug-AGL: SPEC-4682
Bug-AGL: SPEC-4683
Bug-AGL: SPEC-4684
Change-Id: I5ab1bc49dc361a7fc30a62c5c82d286e66bad72e
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28875
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
with out having a secondary access to pipewire(export core), wireplumber creates
bluetooth device objects as well as access the existing pipewire objects using
the same pipewire connection, which can some times create race conditions.
Enable export core, so that wireplumber bluetooth monitor has access to both the
regular core and the export core.
Bug-AGL: SPEC-4750
Change-Id: I0db9b276ecd6972294c36722bf5a31c5ac00f186
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28639
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Highlights of Pipewire.
- The loopback module and other couples streams will now not randomly
fail in some cases. (#3028).
- PipeWire can now generate a limits.d config file with our recommended
settings for priorities and memlock.
- Add back the deprecated symbols but make sure a deprecated warning is
emitted for them. This fixes compilation issues in bindings.
- Clear old buffer memory on ports to fix some SIGBUS errors.
- Fix a critical bug that causes audio distortion in some cases when using.
AVX2.
Highlights of Wireplumber.
- Added bluetooth SCO (HSP/HFP) hardware offload support, together with an
example script that enables this functionality on the PinePhone.
- WirePlumber now maintains a stack of previously configured default nodes and
prioritizes to one of those when the actively configured default node
becomes unavailable, before calculating the next default using priorities
(see !396).
- The libcamera monitor is now enabled by default, so if the libcamera source
is enabled in PipeWire, cameras discovered with the libcamera API will be
available out of the box. This is safe to use alongside V4L2, as long as
the user does not try to use the same camera over different APIs at the same
time.
- Added i18n support to be able to translate some user-visible strings.
Bug-AGL: SPEC-4732
Change-Id: Ie2f9cb99b4594d21e5c2acd092fe54e93d067410
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28590
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The bitbake recipe has style guide at
https://www.openembedded.org/wiki/Styleguide
In do_install
Don't use mkdir to create destination directories,
use install -d instead.
Bug-AGL: SPEC-4401
Signed-off-by: duerpei <duep.fnst@fujitsu.com>
Change-Id: Iaf33b842321e0199aee7227077520a12a9a53d74
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27562
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
-carve out a new recipe for wireplumber policy, so that it
can be assigned to the concerned container.
-create new packagegroup-pipewire-base capturing the set of
packages required to use PipeWire API.
-remove the implicit dependencies between different wireplumber
recipes, now each of those recipes will have to be included
in the top level bb file.
-remove the wireplumber-config virtual package.
Bug-AGL: SPEC-4100
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Change-Id: I8ff6834c5dae94b75e07a0709c403b5d7f3b274b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27254
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
|
|
Remove accumulated patches to PipeWire that allowed building it with
the older meson in dunfell, as they break building it newer meson
in poky master/kirkstone. A fix contained in one of those patches
for installing the systemd system unit has been reworked and added
as a new separate patch.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I949875339b500c9ccd8590a635f7734158617579
|
|
The upstream Yocto compatibility checking now looks for "patch"
and "maintainer" in layer README files, add some documentation
in affected layers to avoid failures on the Yocto autobuilder.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I779546316198530888788772f9355e93ea325782
|
|
For tracking upstream, we need to update the layer compatibility.
Bug-AGL: SPEC-3819
Change-Id: Ic1bc22653e59b2891d77d44cdd409a805e5cc332
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Backport revert done post-0.3.47 to fix crashes seen in MPD.
See upstream discussion here:
https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2147
Bug-AGL: SPEC-4294
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I48bf5bc632ad50daa43a3e8125ec8885f7f3a537
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27297
Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Highlights of Pipewire.
- Removed check and warnings to catch leaked listeners on the proxy.
- Fix critical bug where alsa devices would not show when the kernel
was compiled without VERBOSE_PROCFS
- Almost all limits on number of ports, clients and nodes are removed.
- Many more bug fixes and imporovements.
Highlights of Wireplumber.
- Added bluetooth profile auto-switching support between A2DP and HFP
modes
- Better default audio sources and sinks selection
- Backported a fix for a known issue with selecting the default
devices on top of 0.4.8 (ae6c9a5e)
- Many more bug fixes and imporovements.
Change-Id: Id5414aed065593893a237437a8c77645cbf15804
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27220
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
-This allows remaping streams using pipewiresink to match the channel layout
of the target device
Bug-AGL: SPEC-4241
Change-Id: I4090187dc9977fc3d0ee440b601cb95f6864a9cf
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27130
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
- AGL project not to take the wireplumber project upstream config
files which are recently moved to /usr/share/wireplumber/.
- create-items.lua to be loaded with correct arguments.
Change-Id: I57200755d749e2222e90996cc034f66baca5568a
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27099
Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Define a capture endpoint to get record working.
Change-Id: I3356736676bf112249b078ffeb16548cfa3daea3
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27073
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27092
Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I3e478f5e1215d128f0d76ffb2b18c278d90de266
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27022
Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: Ie9e3fd0a67e6a5fa38543cb9b4cc54f2e0555813
Signed-off-by: Ashok Sidipotu <ashok.sidipotu@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27040
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
During the last workshop the transition to the new framework was presented.
This change essentially deprecates the SMACK-based application framework.
To prepare the integration of it, we remove the deprecated components:
- meta-agl-core: remove Smack kernel patches
- meta-app-framework
- meta-pipewire/dynamic-layers/meta-app-framework/
v2: rebased
Bug-AGL: SPEC-4121
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: Icdaeadfb5d2193f3a4c535168c88da6073423e67
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26752
|
|
The "IC SoundManager" design specifies that there needs to be
a session manager running in the host to manage devices and permissions,
but all the domain-specific policy and app management needs to run in
the IVI container, together with the apps. With this split, we are able
to achieve that.
In addition to the "host" and "policy" instances, we are also adding
a "bluetooth" one, which loads the bluetooth plugin and manages the
bluetooth device. This can be moved to the IVI container as well,
or elsewhere... it only depends on bluez (so it must run in the same
container as bluez).
For now, given the absence of an IVI container in the lxc-demo image,
all instances are running in the host, but it is trivial to move all
the non-host ones to another container later.
To compliment pipewire-ic-ipc, this change also adds an "alsa-suspend"
lua script that runs in the context of the "host" wireplumber instance
and its purpose is to mute pipewire-managed alsa devices when there is
a sound playing in the IC container (on another alsa device).
Finally, this change also adds V4L2 configuration in the "host" wireplumber
instance, which is still disabled (and untested), but you can easily enable
it for experimentation by uncommenting the relevant line in
host.lua.d/90-enable-all.lua
Bug-AGL: SPEC-4027
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: I9febc4f3919e7c559a5d7d32bfe7bc95c75934f2
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26662
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Naoto YAMAGUCHI <naoto.yamaguchi@aisin.co.jp>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This is mostly the result of running a slightly customized version
of the convert-overrides.py script from poky with additional
overrides added. A few minor fixups were done by hand afterwards
during a review of the changes.
The intent of these changes is to minimize the effort to keep the
"next" branch that builds against poky master up to date and tested
in preparation for the switch to the next Yocto LTS release in
early 2022.
Bug-AGL: SPEC-4052
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-3957
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: I5f41e4161b281473cebc3cb3d8e27c2c93b457be
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26470
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
We need to set LICENSE to multiple (MIT & GPL-2.0-only & LGPL-2.1-or-later) to satisfy
the current scheme required by bitbake.
But the licenses of the output packages are not all 3,
but mostly MIT and a few LGPL-2.1-or-later and one GPL-2.0-only.
To map the dynamically created output packages with the proper MIT license,
we need to call setVar after all dynamic packages are created.
Bug-AGL: SPEC-3844
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I0900902af2527254869c125ec90239c9afb26f3c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26449
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Georgios Kiagiadakis <george.kiagiadakis@collabora.com>
|
|
* Install symlinks to the configuration files in /etc/alsa/conf.d
* Add patch from pipewire master to support roles on the virtual
alsa device
Bug-AGL: SPEC-3822
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: Ie411df23390754e2cdc494657eb9881771b8c401
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26447
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* The pipewire recipe has been synced with the upstream yocto one
* WirePlumber configuration now has volume ducking enabled for
navigation messages. This means that music will now duck when
a navigation message plays instead of being corked.
* PipeWire's default configuration now lives in /usr/share/pipewire,
with the possibility to override it in /etc/pipewire. This allows
resetting to upstream defaults by removing /etc/pipewire
v2: add licenses to the layer to match the upstream recipe,
adapt licenses of sub-packages
v3: mark each package with the desired license instead of the mix
v4: simplify the license output of the sub-packages
Bug-AGL: SPEC-3844
Change-Id: I7a15ddb503d5b064f244c8a42a1aafb4caa1d46a
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26426
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Remove dra7xx-evm machine template and related BSP configuration
tweaks. The configuration is stale and untested, and no one has
expressed interest in it for long enough that it seems better to
just remove it to avoid confusion about support status.
Bug-AGL: SPEC-3934
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I1659eef113cf1e6fcfdddf65f712275b8fc49b6f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26378
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* Update the bluetooth config to be aligned with the default upstream config
* Make a2dp streams use the Multimedia role instead of Communication
* Add wireplumber.conf in the agl config, which is now required
Bug-AGL: SPEC-3844
Change-Id: Ifdc61065593b7cbd366dd490689135f0973ebf66
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26340
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add LAYERDEPENDS definition to meta-pipewire's layer.conf, meta-oe is
now a dependency due to Wireplumber's use of lua.
Bug-AGL: SPEC-3909
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia57de5b43cca86a5b5260a06494ef43dec6ae675
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26343
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-3900
Change-Id: Ib93772c58b4177b8e72713e4d395c9244732e907
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26338
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-3900
Bug-AGL: SPEC-3844
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Change-Id: I36eba1a6ad1342351b668360c2c812f0a9bb3632
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26333
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-3844
Change-Id: Ie32bfa43bf078c7d218d3150dc616501b8848bd0
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26094
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The most recent fixes to the Wireplumber sink configuration for the
rcar3 boards (for SPEC-3661) seem to have accidentally been dropped
during the changes for the layer reorganization done for SPEC-3723.
Restore them to get the expected default output sink behavior.
Bug-AGL: SPEC-3661
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I2a81041629e81746d6990e5604db483e0583ad46
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25865
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time.
Trim dependencies and move most 'demo' related recipes to meta-agl-demo.
v2: changed to bbapend + .inc , added description
v3: testbuild of all images
v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups.
v5: rebased
v6: merged meta-agl-distro into meta-agl-core,
due to dependency on meta-oe, moved -test packagegroup and -qa images
to own layer meta-agl-core-test
v7: Fixed comments from Paul Barker
v8: Update the markdown files
v9: restore wayland/weston/agl-compositor recipes/appends, reworked to
move app f/w specific changes to bbappends in meta-app-framework and
only demo specific weston-init changes to meta-agl-demo
v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend
Description:
This patch is part 1 out of 2 large patches that implement the layer rework
discussed during the previous workshop. Essentially meta-agl-core is the
small but versatile new core layer of AGL serving as basis for
the work done by the IC and IVI EGs.
All demo related work is moved to meta-agl-demo in the 2nd patchset.
This should be applied together as atomic change.
The resulting meta-agl/* follows these guidelines:
- only bsp adaptations in meta-agl-bsp
- remove the agl-profile-* layers for simplicity
-- the packagegroup-agl(-profile)-graphical and so on
have been kept in meta-agl-demo
- meta-agl-profile-core is now meta-agl-core
- meta-agl-core does pass yocto-check-layer
-- therefore use the bbappend + conditional + .inc file
construct found in meta-virtualization
- meta-agl/meta-security has been merged into meta-agl/meta-app-framework
- meta-netboot does pass yocto-check-layer
- meta-pipewire does pass yocto-check-layer
Migration:
All packagegroups are preserved but they're now enabled by 'agl-demo'.
Bug-AGL: SPEC-3723
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
|
|
This is a requirement of the yocto-check-layer script.
Bug-AGL: SPEC-3724
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I60c41d77d4b83eccf4e69651c1fe7cd334a16cc5
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25768
|
|
Now (RCAR BSP 4.1.0) the card ak4613 got two device (the new one is for
the hdmi), so we must specify the device in the wireplumber
configuration.
Bug-AGL: SPEC-3661
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I6fdf4fdc22d93a0558874e447ec5c4254f13d238
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25510
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Include additional improvement related to iMX8MQ, which should help to
mitigate audio issues.
First, add a warning if not all the committed data is actually
read/written.
Secondly, if snd_pcm_hw_params_is_batch == 1 tweak the delay to make
sure at least a period is available in the buffer to avoid xrun.
Bug-AGL: SPEC-3410
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Change-Id: Ief2e69960b3e13c1d5085581d1a7c7b3e73570c0
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25164
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
In order to use audio jack as default audio sink on iMX8MQ EVK add a
specific configuration file in WirePlumber.
Bug-AGL: SPEC-3410
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Change-Id: Iab6b85d3cd2072ea2d081fd44bdb492a25a92d74
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25129
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
As a an initial step to solve audio issues on iMX8MQ add a patch to
reduce the period_size and in that sense have better control about
buffers usage.
Bug-AGL: SPEC-3410
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Change-Id: I0125515fc7ef6f0c9dbd6336d56d348d41f9115f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25093
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Fix Kingfisher WirePlumber configuration files with the required
s/rcarsound/ak4613/ to match the filenames.
Bug-AGL: SPEC-3453
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ic8398060e0085abe0b69b458788fb5b404a26010
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25010
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Reasoning:
- the profile-graphical-html5 belongs in the main layer
- meta-pipewire is enabled by default
For reference - the original location is:
https://gerrit.automotivelinux.org/gerrit/gitweb?p=AGL%2Fmeta-agl-devel.git;a=commit;h=8479cd0c37e5e5e207a16f21c864610103e4f20f
Bug-AGL: SPEC-3453
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: Ib475331bb6f84437020728fbb3f17b4acaab0106
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24875
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
|
Ashok Sidipotu
Scott Murray
Jan-Simon Moeller
duerpei
George Kiagiadakis
Ronan Le Martret
Walter Lozano