| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time.
Trim dependencies and move most 'demo' related recipes to meta-agl-demo.
v2: changed to bbapend + .inc , added description
v3: testbuild of all images
v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups.
v5: rebased
v6: merged meta-agl-distro into meta-agl-core,
due to dependency on meta-oe, moved -test packagegroup and -qa images
to own layer meta-agl-core-test
v7: Fixed comments from Paul Barker
v8: Update the markdown files
v9: restore wayland/weston/agl-compositor recipes/appends, reworked to
move app f/w specific changes to bbappends in meta-app-framework and
only demo specific weston-init changes to meta-agl-demo
v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend
Description:
This patch is part 1 out of 2 large patches that implement the layer rework
discussed during the previous workshop. Essentially meta-agl-core is the
small but versatile new core layer of AGL serving as basis for
the work done by the IC and IVI EGs.
All demo related work is moved to meta-agl-demo in the 2nd patchset.
This should be applied together as atomic change.
The resulting meta-agl/* follows these guidelines:
- only bsp adaptations in meta-agl-bsp
- remove the agl-profile-* layers for simplicity
-- the packagegroup-agl(-profile)-graphical and so on
have been kept in meta-agl-demo
- meta-agl-profile-core is now meta-agl-core
- meta-agl-core does pass yocto-check-layer
-- therefore use the bbappend + conditional + .inc file
construct found in meta-virtualization
- meta-agl/meta-security has been merged into meta-agl/meta-app-framework
- meta-netboot does pass yocto-check-layer
- meta-pipewire does pass yocto-check-layer
Migration:
All packagegroups are preserved but they're now enabled by 'agl-demo'.
Bug-AGL: SPEC-3723
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
|
|
Remove scripts that supported the EOL Joule board.
Bug-AGL: SPEC-3555
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I2a50ed2631ff1bc961717e7cff27b861f6c43d5b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25159
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
New options are:
* -t|--topic : add a 'topic' to current setup (default: empty)
* -V|--version : display aglsetup version
The topic value can be any string and it is propagated to aglsetup.manifest,
which in turn is used by distro-build-manifest to put it in DIST_BUILD_TOPIC
variable in all build manifests (deploy dir, target image, sdk)
Using the --topic option to specify a unique identifier will help to provide a
common ID for all builds in the same "family" even if features and layers differ.
For this purpose, a topic could be:
* a gerrit review id + a patchset number
* a project name (git repo) + a Change-Id
* a random UUID
* ...
When run with -V or --version, aglsetup writes its version on stdout and sets
the variable AGLSETUP_VERSION then exits. As aglsetup can only be called by
being sourced, the AGLSETUP_VERSION variable is finally set in the caller
environment.
The version can be used for various purposes. The immediate goal is to detect
if --topic option is supported or not.
Bug-AGL: SPEC-2646
Change-Id: I0b68dfa297509dac07e9b2942948631cfc13c319
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
The build timestamp is added to build manifests deployed in target images and SDK.
Also, this patch adds a new option '-t|--timestamp' to distro-manifest-generator.sh
to let the recipe pass the same timestamp as the one used for the image suffix
(in Yocto 2.6/Thud, DATETIME is used). So DIST_BUILD_TS should have the same value
as the image version suffix.
Bug-AGL: SPEC-2649
Change-Id: I2a9d11b2ce59753bca31ebb8e82d46c224110d68
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Using repo tool, a .repo subfolder is created beside the cloned git repositories.
It contains also some git repositories (handled by repo tool).
But when enumerating the layers, those extra ".repo/xxxx" git repositories must
be ignored to get a consistent signature on layers.
This patch excludes hidden folders (starting by '.') from the search.
Bug-AGL: SPEC-2648
Change-Id: Ibee41d4efff0898d1bf67ab661ccdf70729b6211
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
A missing empty line at the end of a feature's local template
file will lead to a ParseError error.
This patchset will automatically append a new line
at the end of the feature's local template file when
setting up AGL.
Bug-AGL: SPEC-2563
Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com>
Change-Id: Ica9decdb0bda182de7e25ace4fca6a9f6f7db5ff
|
|
Following recent change 334a201 (#21619), it's now necessary to
explore the layers folder to find git repositories.
But when the build directory is a subfolder of $METADIR (repo folder),
'find' digs too deeply to find git repositories.
This patch adds some limits for 'find' to dig into subfolders:
* only find "top" git repos (no git submodules)
* limit the search depth to 2
Bug-AGL: SPEC-2450
Change-Id: Idd907737673d196cc8ba157a5c49492119efeb88
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
New layout with subfolders causes incomplete DIST_LAYERS to be generated
in deploy/images/.../build-info.
This patches fixes how git repos are found in the layers directory.
Bug-AGL: SPEC-2450
Change-Id: I4b6a62b68064de12119e668522242677e11c65eb
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Some warnings are emitter on stderr when enumerating layers with wildcards.
This patch removes the useless messages from the output because that may
be misinterpreted by the user.
Bug-AGL: SPEC-2450
Change-Id: I1fbde964e9a0824146a088868de9a464efccb4f1
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
When a private definition for a machine or feature has to be maintained,
the easy way is to have an extra layer 'meta-xxxxxx' containing specific
definitions on top of AGL. This layer can be fetched beside other meta-agl repos.
In the past, aglsetup used to include any definition located in the $METADIR
folder ($METADIR/*/templates/...). With the new layout and change 2b3a44b,
a restriction has been put on folders matching 'meta-ag*', which is very restrictive.
This patch does something in between, by matching all folders 'meta-*'.
NB: with the new layout, this shouldn't include bsp layers or external layers
so it's pretty safe.
Bug-AGL: SPEC-2450
Change-Id: I459ea778380580e5b80685cc86779f36a232ac7c
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
To be merged together with:
https://gerrit.automotivelinux.org/gerrit/#/c/AGL/AGL-repo/+/21389/
v2: fix the aglsetup script
v3: fix scripts to extract m3ulcb
v4: use single folder for BSPs
Bug-AGL: SPEC-2450
Change-Id: I3227896c68ec1413f55cf67ad8f15a7adfe87a52
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Distro build manifest is easier to parse if output is made in a structured
format. Adding JSON output format will allow bindings to read information
more easily.
The files created are now:
On target:
* /etc/platform-info/build (shell format)
* /etc/platform-info/build.json (JSON format)
In image deploy dir (.../tmp/deploy/images/$MACHINE/):
* build-info (shell format)
* build-info.json (JSON format)
In sdk deploy dir (.../tmp/deploy/sdk/):
* poky-agl-<version details>.build-info (shell format)
* poky-agl-<version details>.build-info.json (JSON format)
Bug-AGL: SPEC-720, SPEC-1917
Change-Id: If45d2c5dd96b15ce790aa7f7f97c24f119ad117b
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
To keep the workflow compliant with upstream Yocto projects,
it's better to not use BB_ENV_EXTRAWHITE to pass variables
to recipes.
This commit updates aglsetup to generate the file agl-init-build-env
as 'before' (=before the addition of distro-build-manifest)
Bug-AGL: SPEC-720, SPEC-1741
Change-Id: I96df245e099c15a1d2425052c4d8cc64363042c8
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Change-Id: I6579e0bc79e030b64bfbf936fc90d42298e73732
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
This patch modifies aglsetup to output the execution context in a
"setup manifest" located in $builddir/aglsetup.manifest
This file can then be processed by another script (distro-manifest-generator.sh)
to generate a complete distro manifest at build time.
Bug-AGL: SPEC-720, SPEC-1741
Change-Id: I1f9bc8a6d8bc4c659e59ed0025f71ad9e1c86355
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
* To update a rpm file (with dnf) we need to have a valid rpm revision.
Let 2 packages pkg_1 and pkg_2 (built in yocto).
If pkg_2 is newer than pkg_1, and one wants to be able to update it
with dnf, it must respect some rpm naming rules.
if ${pkg_2_name} > ${pkg_1_name}
-> pkg_2 is newer than pkg_1
elif ${pkg_2_name} = ${pkg_1_name} and ${pkg_2_revision} > ${pkg_1_revision}
-> pkg_2 is newer than pkg_1
else
-> pkg_2 is equal or older than pkg_1
Currently, the Yocto build process (used by AGL, so whithout special service)
doesn't change revisions for a build. So packages are not updatable from a repository
with dnf.
* This patch adds an option -r|--rpm-revision <schema> to aglsetup.sh so that RPMs
produced by bitbake will have correct revisions suitable for binary publishing.
<schema> can be:
'prservice[:<address>]' : Use a PR service daemon.
if <address> is not specified, the default value 'localhost:0'
is used (shortcut for a PR service started by bitbake)
'timestamp' : Use a generated time stamp (UTC).
'value:<revision>' : Use <revision> explicitly.
'none' : Do nothing.
p16: change --rpm-revision options parsing, use UTC timestamps, refactor code
p19: remove smart parsing of host:port for prservice option - back to dumb option
Bug-AGL: SPEC-920
Change-Id: I1f4c9fd093fa350d19450a12ac1847885740596d
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Johann CAHIER <johann.cahier@iot.bzh>
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
This patch fixes the removal of the huge file
/tmp/TMP-AGL-wic-image.wic
Change-Id: I8858109dca62eb20d4bdabab3d7a593205a30ea6
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
* Remove, from recipes, reference to porter, gen2, krogoth.
* cleanup mardown from reference to porter.
* cleanup markdown (markdownlint score 0).
Change-Id: I70b9880fc52ef3c848da588d3a256fa8eee48606
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
- Stop using --ondisk XXX in the wks files, that enforces using
USB/SATA/etc as /etc/fstab will be referencing these devices.
- Pass --use-uuid for the boot partition
- Update mkefi-agl.sh and mkabl-agl.sh to modify the final fstab to
use the PARTUUID they create rather than the PARTUUID of the resulting
wic file.
Change-Id: I450ba77805fdb83e31411ea48b25aad415fa8a69
Bug-AGL: SPEC-1300
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Change-Id: I245d77f231fbb625d5e13a2c7e0e9cbabfebdf80
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
|
|
Change-Id: I748d4858c523e8c41d41a9acdd4b117b40937400
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
|
|
Change-Id: Ia1903d6e5906f3353ba1ad1f9c259865bf507330
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
|
|
detection/rejection of configiguration with initrd=microcode.cpio
Change-Id: Iff7cbd34fb8abd0f0860fe183018a2d9a133614e
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12663
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I94c09c6105ac06a37cedc04c777dd1372015a02d
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12263
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-1002
Change-Id: I93407ca24c67b6b7c4e9aa09325fbf78d01f1c64
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12111
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I5d191ba33b4a1a561daeff89f17dd62ce329d079
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10767
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I884827ed221ad7dc53512aa213291b1f48e60dac
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
|
|
The absolute build path shouldn't contain any space.
Discussion: https://lists.linuxfoundation.org/pipermail/automotive-discussions/2017-February/003522.html
Change-Id: If3de580a2a8fd0f944c40f669a9fcd2de7e1f04b
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
With features dependencies, it may happen that the final list of features
to handle contains duplicates. With recent changes on configuration fragments, this
produces some WARNINGS due to multiple inclusions of the same file in the
generated local.conf
.
This commit cleans up the features list resolved internally by removing duplicates
before generating local.conf
Change-Id: I009c41108086e76b76272e62c8ba9101fcc45437
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
This converts the included features used for CI purposes to use the
dependency format introduced.
Change-Id: I405af9ffbd6954d0e78b5f738e762a80687337d7
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
These features (shortcuts) do activate the feature set for:
- the changeset builds (agl-ci-change-features)
- the snapshot builds (agl-ci-snapshot-features)
Change-Id: I4972f61b070836fedef8e06d32deaf07b8978dfb
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
* you can add included.inc file for each feature
* if features is include into an other feature,
they are print during the --help command
#source meta-agl/scripts/aglsetup.sh -h
...
Available features:
[meta-agl]
agl-all-features :( agl-demo agl-appfw-smack agl-devel agl-netboot agl-sota )
agl-archiver
agl-devel
agl-isafw
agl-netboot
[meta-agl-devel]
agl-renesas-kernel
[meta-agl-extra]
agl-appfw-smack
agl-demo :( agl-appfw-smack agl-devel)
Change-Id: I4a72abd48f70a9262203acba84fac24d9dd4dce0
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
|
|
Change-Id: I3e3306ec9c8b2cd898beb779bbbade235a83901e
Signed-off-by: Dominig ar Foll <dominig.arfoll@fridu.net>
|
|
This change introduces an agl-all-features flag.
It is basically a feature that will enable a list of
'known-good' features from an included file.
It is meant to serve two purposes:
- simplify automation scripts
- ease-of-use for users building the whole set of features
Change-Id: Ia962d6ec8a6c6345fb27e303cabbf805e729a8ca
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The aglsetup is always succeeded regardless of whether
got errors while executing sub scripts or not.
This is caused by following script.
call_func 2>&1 | tee xxxx.log
The result of this line always becomes 0 (succeeded) by
result of command 'tee'.
The '$PIPESTATUS[]' should be used for this case.
Change-Id: I67bf0dbc86331ec7858bd8edb4739a5e7729275b
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Change-Id: I0e89fc869c048d6bd1b49904a683f645ca51ebec
Signed-off-by: Dominig ar Foll <dominig.arfoll@fridu.net>
|
|
This patch allows the setup script called by scripts/aglsetup.sh to
search for available machines and features in all repositories located
in the meta directory (the directory where meta-agl has been cloned).
In particular, this now allows to specify a machine or a feature located
in meta-agl-devel.
Important note: duplicate machines or features in different layers
are detected and forbidden (script fails with error) to avoid any ambiguity.
Change-Id: If55105a05889ca95da856d65986a86f4ef5f4b2c
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
fragments
This fixes the problem with Qualcomm boards where EULA approval is required.
See: https://lists.linuxfoundation.org/pipermail/automotive-discussions/2016-July/002279.html
Change-Id: Ifad216bf559a246d6883e7c2828dacd7bd225075
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
This is the application of the process proposed here:
https://lists.linuxfoundation.org/pipermail/automotive-discussions/2016-June/002232.html
Bug-AGL: SPEC-180
Change-Id: I5a7015fa810547a9ecf4fb096367323af3cdc670
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
This patch adds the dragonboard-410c as DragonBoard-410c target.
There are instructions to write image into eMMC and boot system at:
https://github.com/96boards/documentation/wiki/Dragonboard-410c-Installation-Guide-for-Linux-and-Android#flash-the-bootloader-into-on-board-emmc
v2: Rebase after merge conflict (jsmoeller)
v3: Generalize the eula script into function to be reuseable (jsmoeller)
Depends-On: Idcad2c27539af130704a3c66efe6b91868eef534
Change-Id: I52e5d732c865989796158016758e6e745c74cac8
Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This adds the rpi 2 and 3 to the mix.
Untested!
It merely enables the layer and nothing else.
Patches/fixes welcome.
Depends-On: I08ec2e9e41003b9dc8244f86d50ccf64e112aba2
Change-Id: If512487c6bd57a7640cbf2f07a12f6877137daee
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This changeset introduces the TI 'vayu' board.
We need to adapt the provided bsp layer 'meta-ti' as
it is only at YP 1.8 fido right now.
Two changes are needed/known:
a) BBMASK eudev bbappend (local.conf.sample)
b) apply patch for gcc5 to u-boot-ti-staging
On top thie changeset also does janitorial work on the templates:
- conf-notes is now in a folder common and symlinked
- layer additions have been sync'ed
- file layout sync'ed with templates in meta-agl-demo
Change-Id: Ib52a9252800d54d5105ac1f5354ad3a3b014188f
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
instead of editing local.conf to defines DL_DIR and SSTATE_DIR,
the shell environment variables can be propagated in poky/oe build env.
BB_ENV_EXTRAWHITE is defined in "poky/scripts/oe-buildenv-internal"
Thus, variable append step should occurs _after_ setup poky/oe.
Change-Id: I5d4901435812d2d82950588a89b8ec67f2b01ea8
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
|
|
This alias will not extract the tarballs and allow us to build core-image-minimal for the
renesas board w/o the proprietary blobs.
Change-Id: I22061a87f5802e6ce2bc6a8260eeee4cfa2ab1f7
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This commit allows us to define also alias names for MACHINE.
TEMPLATECONF moved down for this.
Change-Id: Ibec9882ac5a7c3bf734ead8a05b452bb655bbeeb
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This patch adds the wandboard as i.mx6 target.
Change-Id: Iae25b991d475ce321b4192cbac130ad389021c72
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
When reuse a terminal between defferent targets, poky's setup script
report error and setup is terminated.
E.g. Setup for qemu first, then setup for porter.
$ source meta-agl/scripts/envsetup.sh qemux86-64 build-qemu
$ (bitbake or somthing)
$ cd ..
$ source meta-agl/scripts/envsetup.sh porter build-porter
ERROR: OE-core's config sanity cheker detected a potential misconfiguration.
...
Change-Id: Ie8e6f723d447b1ea53ada333f03bbfb4f03433c4
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
In previous patch, meta-intel layer is added to BBLAYERS for
both QEMU(qemux86/qemux86-64) and Minnowboard MAX(intel-corei7-64)
although QEMU target doesn't need it.
It is preffered to prepare a template configuration
for each machine or board.
Change-Id: I19bd4e66e8375a1760d9850f4a056651ae0fa6ca
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
To configure for MinnowBoard MAX, use 'intel-corei7-64' as MACHINE.
E.g. set up build environment by meta-agl's script:
$ source meta-agl/script/envsetup.sh intel-corei7-64 [build-dir]
There are instructions to write image into SD card and boot system
at "http://elinux.org/Minnowboard:MinnowMaxYoctoProject".
Change-Id: I19062482848bb6157791ab698bf92984e24a6d9a
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
A sourced script cannot use exit as it will
terminate the shell session. "return -1"
is not supported due to the negative value.
Use "return 1" instead.
Change-Id: I7452b7939c5c843eaf76b6600e5eb55c06d17668
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
Jan-Simon Moeller
Stephane Desneux
Bechir Mghirbi
José Bollo
Ronan Le Martret
Tom Rini
Dominig ar Foll Intel Open Source
Tadao Tanikawa
Kotaro Hashimoto
Yannick Gicquel