summaryrefslogtreecommitdiffstats
path: root/templates/machine
AgeCommit message (Collapse)AuthorFilesLines
2018-06-28[GEN3 KF] Configure GPS deviceRonan Le Martret3-0/+9
* For the Renesas Gen3 extention board Kingfisher, we must specify the GPS device for gpsd service. * Create a new machine type kingfisher. Bug-AGL: SPEC-1538 Change-Id: If6b7e49f6a006218e57c58e15855e0d65eb849cd Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-03-20Add kingficher supportRonan Le Martret3-0/+3
Change-Id: I75b9ced887249380a6164296b73acaaca91e3060 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-03-07Add db-820c as community boardJan-Simon Möller2-0/+4
Add templates for the db-820c as community board alongside the 410c. Only works with rocko/master. v2: - fixed 96board-tools inclusion - added kernel bbappend Change-Id: I411505ae0aeb5939338bb94f5db04c2572fc6612 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-02-20Remove old boards for rockoJan-Simon Möller3-9/+0
Old boards being removed: - porter templates - wandboard (untested) - qemux86 (qemux86-64 - aka 64bit - is the only default) Change-Id: Ia366cdeac988780dc3253e20357b868b3b6b8070 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-02-13Remove porter machineronan5-30/+0
Change-Id: I5378836e8f00d25f4842f3cb28ad586dfa2097bb Signed-off-by: ronan <ronan.lemartret@gmail.com>
2018-02-13dragonboard-410c: remove ACCEPT_EULA settingKotaro Hashimoto1-1/+0
Since r1032.1 the Qualcomm firmware have been released with a license that allows redistribution. And the file is now available publicly without the need for user to read/accept EULA. As such, we remove the constraint on meta-qcom as well. http://git.yoctoproject.org/cgit/cgit.cgi/meta-qcom/commit/?h=rocko&id=f99e865f8944bc5a935a87bf289d322e898413cd Bug-AGL: SPEC-1181 Change-Id: Icbf71cce5c7f1f43fdc44c741b95fe62911064d4 Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
2018-02-05bsp: add salvator-x H3 supportMartin Kelly3-0/+17
The Salvator-X uses the same SoC as the H3 but includes other peripherals. As a result, it can reuse the same h3ulcb config but needs a different device tree and kernel config. This is already supported in meta-rcar-gen3 but needs AGL plumbing, so add it. There is also an M3 version of the Salvator-X, but I don't have one and cannot test it. So I've added support only for the H3 version here. Change-Id: I64683f4f65dda3fee63e6243f0ba916e568ca245 Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-01-04templates/machine: remove unused test dirsKevin Hilman21-317/+0
The "test" dir of the machine templates is no longer used by the Jenkins job builder tools (ci-management). Remove them. Change-Id: Ice2ee89d7fba4f5cce763f71e4a4b206fa04b98c Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-31meta-agl-bsp: templates: update of nitrogen6x machine templateMihail Grigorov1-0/+0
Bug-AGL: SPEC-905 Change-Id: I959a9f8d085b0fb247998790191c3dcf2e4e34fa Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11567 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Matt Porter <mporter@konsulko.com>
2017-10-31imx6qsabrelite starts to using 'meta-boundary' layerMihail Grigorov1-0/+1
a) Adding 'meta-boundary' to bblayers.conf. b) Prevent of build errors from missing bb files (firefox, chromium), with help of BBMASK variable. Bug-AGL: SPEC-905 Change-Id: Id0b823d4f0e8977206dbd22684e0d2cf9e88465f Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11569 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Matt Porter <mporter@konsulko.com>
2017-10-14meta-agl-bsp: imx6: Update the imx6qsabrelite machine templateMihail Grigorov4-6/+7
* Add include/agl_imx6qsabrelite.inc * Change the FSL layer from meta-fsl-* to meta-freescale-* * Rename 50_bblayers.conf.inc to 40_bblayers.conf.inc Bug-AGL: SPEC-905 Change-Id: I29563fa7bc25240018383fba2b30e2171366282a Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11307 Reviewed-by: Leon Anavi <leon.anavi@konsulko.com> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-08-09m3ulcb-nogfx: enable HW testsKevin Hilman3-1/+3
v2: fix MACHINE_NAME Change-Id: I54fbed432ffe3cf023629f8c98879f274d6d00c0 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9851 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-08-04raspberrypi: Fix U-Boot supportTom Rini5-10/+10
In order to use U-Boot on the raspberrypi3 we need to have the equivalent of the following commit from upstream meta-raspberrypi: commit 67e02164929a7d8cc187315aaaab60f6f3aaf422 Author: Paul Barker <paul@paulbarker.me.uk> Date: Mon Feb 13 23:32:43 2017 +0000 u-boot: Fix boot on rpi3 With that done, we can re-enable U-Boot support for raspberrypi3. With this done we can also now re-enable testing, so do so. For consistency we can now switch raspberrypi2 over to U-Boot as well. Change-Id: I9c96a66bf5644bf63f2566559ab7d9c4101b7a55 Bug-AGL: SPEC-409 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10491 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-24tests: enable HW test for QEMU x86-64Kevin Hilman2-0/+2
Change-Id: Ic7d19e6fc9e682a5a885cb572200ce178cf3da1f Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10241 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-07-21tests: templates/qemux86-64: KVM updatesKevin Hilman1-1/+1
Updated QEMU commandline arugments to those known to have been validated and working with KVM and with AudioManager and HomeScreen. Change-Id: I7ac722d4cc49dd04db1bd4715ae737e1f21eb36b Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10307 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-21tests: templates/qemux86-64: enable QEMU audio driverKevin Hilman1-1/+1
Add "-soundhw hda" to QEMU command-line so that GENIVI AudioManager will start up successfully. Change-Id: I50136f664fd1d4712ad646f751f596f54ba49905 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10247 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-19tests: templates/qemux86-64: add MACHINE name to rootfs filenameKevin Hilman1-1/+1
Change-Id: I99457bbef1d5b1e0bdb07ba44898652d447d8593 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10239 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-19tests: templates/qemux86-64: add (empty) DTBKevin Hilman1-0/+1
The JJB templates expect there to be a $DEVICE_DTB in various places, and if not set here, will have a default value (from rpi3). Change-Id: I3ae10a6fcf4f8f85dc49e45696a982ad85b29203 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10243 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-18qemux86-64: add hwtest environmentKevin Hilman1-0/+9
Change-Id: Ic52335b32d82257a2c9c451e7dc83dcaef17b11e Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10191 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-17Update freescale layer names, add nitrogen inc fileNathan Illerbrun3-3/+5
Change-Id: I1faf7ad14cc85cd12055f7e4c7e43ffe4ccf0671 Signed-off-by: Nathan Illerbrun <nathani@validmanufacturing.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10203 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-10Disable rpi3 tests as they are broken right now with the kernel ImageJan-Simon Möller4-0/+0
Fix is wip but takes a little. Change-Id: I5b561a687dda47aaa8dfbf19d9b629abb3956549 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10127 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-07-08test templates: m3ulcb-nogfx: use core-image-minimalKevin Hilman1-1/+1
The -nogfx build uses the core-image-minimal target, not the agl-demo-platform build target, so ensure the NBD rootfs filename is the right one. Change-Id: I81fa24a55cfa6acfbeda987f31d6dca5fea9dd52 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10119 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-30Fix i.MX6Takashi Matsuzawa3-0/+13
Bug-AGL: SPEC-704 This is part of the fixe to make i.MX6 buildable again. Following fixes are included in this change: - adding build target imx6qsabreauto - fixing qt5.8 build error - refine bblayers.conf layer order (for dynamic-layers) - meta-fsl-arm -> meta-freescale layer name change - weston.ini lines (use fbdev-backend.so) - /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules) - kernel configuraion to include smack, etc. Follwings are stil not addressed yet: - bblayer.conf layer order still have issue re. dynamic-layers - built and booted on imx6qsabreauto only yet. following existing community boards may need update (i have imx6qsabrelite, but no notrogen6x) Note, this fix is prepared independently of nxp or fsl-community, who should follow-up if there are mistakes to be fixed, or updates that they find needed. Update: Refined on review comment regarding tune settings and kernel configurations. The board successfully boots and shows AGL homescreen. But I found I still have problem with USB. lsusb says 'unable to initialize libusb: -99' error which I am still faling to find the cause. Update2: usb issue may be related to dtb configuration in linux-fslc-imx better to be tracked separately Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574 Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9871 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-29raspberrypi3-64: test: add LAVA env and job templateKevin Hilman2-0/+59
Change-Id: Iea65e4986f3ab7ea41bcbf98bc63be8f4a4e2eba Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9769 Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-28m3ulcb-nogfx: add test templates for LAVA job and environmentKevin Hilman2-0/+57
Change-Id: I9c5a95bd33516e8451113dbabf6b6739dc637b7d Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9819 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-23agl_raspberrypi*.inc: Set KERNEL_IMAGETYPE to ImageLeon Anavi3-6/+6
Set KERNEL_IMAGETYPE to Image to ensure correct generation of kernel7.img and successful booting of AGL on Raspberry Pi 3 and 2 with output from the serial console. v2 (jsmoeller): Also adapt templates/machine/raspberrypi3/test/hwtest.short.environment v3 (jsmoeller): disable CI hwtests as rpi firmware is used Bug-AGL: SPEC-649 Bug-AGL: SPEC-650 Change-Id: If4335ffed7047fd2fbbf4bbd2dff54322cd0bf07 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9727 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
2017-06-23support MACHINE=raspberrypi3-64Kevin Hilman2-0/+4
The meta-raspberrypi layer already supports raspberrypi3-64, where it will build a 64-bit kernel. Add templates so that "aglsetup.sh -m raspberrypi3-64" works. Note that 64-bit kernel build is only supported in the v4.9 branch of the rpi kernel, and that the kernel image type is "Image" instead of Image. Change-Id: Iee728191dc38521be607787d5736d21372f1dff5 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9767 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-05-16dragonboard-410c: install 96boards-tools for resizing partitionKotaro Hashimoto1-0/+2
Add 96boards-tools recipe for dragonboard-410c. This tool resize the rootfs on the first boot. The adding recipe is ported from meta-96boars layer(branch morty). https://github.com/96boards/meta-96boards/ Change-Id: Ica597e36e530533cf4820a3b0a7ad2145bd3d6fb Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9391 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-05-16Add machine templates for the beagleboneJan-Simon Möller2-0/+4
This adds the machine templates for the beaglebone board. The beaglebone is a YP reference system with very good support out-of-the box. It might be too slow for the graphical demos, but could serve well in headless setups. v2: remove whitespace. Bug-AGL: SPEC-590 Change-Id: I3f1d4f57d2ce01f2603446b6663fdaa636a1f7be Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9337 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Karthik Ramanan <a0393906@ti.com> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Reviewed-by: Martin Kelly <mkelly@xevo.com>
2017-05-06Enable lava test-run on vayu boardJan-Simon Möller4-0/+64
This adds the necessary templates to run the CI boot tests also on the TI dra7xx-evm 'vayu'. Change-Id: I9e6303c30bd68db91f5b36b2984f6ef91fa4297d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9295 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-04-30Enable test-run on porterboardJan-Simon Möller4-0/+62
This adds the necessary templates to run the CI boot tests also on the Renesas gen2 'porter'. Change-Id: I2fee98d3acde704fc0762898c4785c897b9eaaf8 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/8635 Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-03-19[rcar-gen3] Update h3 m3 to renesas rcar gen3 BSP v2.16.0 (branch:morty)Ronan Le Martret3-3/+3
Bug-AGL: SPEC-471 Change-Id: Ifb43484b96160b22fe24f446d5560a8796a90e48 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2017-02-19Add template for Altera Cyclone5Jan-Simon Möller2-0/+4
This adds a first template for the Altera cyclone5 board. The build is not yet complete (failing on some gcc6 issue in qtmultimedia-rtlfm-radio-plugin). A few notes: CFLAGS/Tunings are set to -mfpu=softfp compared to the hardfp of all the other target boards we have. Change-Id: I9b179d9aef610ee5a67166df2dd79a52e2ac6c19 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-26Extend bootloader timeoutJan-Simon Möller1-0/+2
Change-Id: Ia46fba4d730918b9da5062b8b7f12f9e4af3a6e4 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-26Adapt test yaml definition to code changesJan-Simon Möller1-1/+1
Change-Id: I035cad67460b9e6c29f882cd983fe80f653757df Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-26Move feature code into the meta recipesRonan12-560/+24
* Having a minimlal local.conf serving the only purpose of user customization is the "Yocto" way of doing things * After a source synchronization (repo sync), feature code must be update without regenerate local.conf Change-Id: I0bb0861f4c07a8b57cb59a03f6ffe9d2d693cbbe Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2017-01-20enhance hw testsJan-Simon Möller2-3/+5
Change-Id: I4796047143e1fd2d2f74a22373ce6c85996a7ae3 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-19Reenable sota sdcard image for rpiJan-Simon Möller1-1/+1
Change-Id: I5801a2bc252a581eb82c7c540e4d546882f1ca62 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-18Add hwtest enable flags for rpi3Jan-Simon Möller4-0/+57
Change-Id: Ifc21b44eef0b40657c04e011575cb27f0533d956 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-13prevent used of mesa-gl and bad use of mesaRonan3-6/+6
* use PREFERRED_RPROVIDER_libgbm-dev = "libgbm to prevent used of mesa * use PREFERRED_PROVIDER_virtual/mesa = "mesa" to prevent used of mesa-gl * https://patchwork.openembedded.org/patch/120281/ Change-Id: Ib03137b6a3f2c58ccfc2b9bc568572cc3be802aa Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2017-01-12Define IMAGE_FSTYPES for rpi targetsJan-Simon Möller2-0/+2
Do use our target filesystem types instead of the defaults in meta-raspberrypi. Change-Id: If92013a5a55208f4f644f5c2b239e0052ce370c8 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-12Improve configuration file for rpi2 and rpi3 for morty.Jan-Simon Möller2-17/+40
Change-Id: I3683edc0638f1ceda0c53d96532276aafb3633fc Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-11Revert back to kernel 4.4 until bsp layer catches upJan-Simon Möller2-2/+2
Our bsp adaptation hardcodes the srcrev of the kernel. Thus we stay on 4.4 until ported. Change-Id: I30f962674cdb567c378fac62cde98bc1cf0f2c1e Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-11Disable gstreamer plugins on vayu due to FTBS on mortyJan-Simon Möller1-4/+7
The three gstreamer plugins do not build right now. Disable until fixed. Change-Id: Ie3d60c88fc73423509dbf36055f7585ab8e81e30 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-10Fix version of mesa in rpi templatesJan-Simon Möller2-4/+4
Change-Id: I977a247c07b3520876ef9738a974e74649304516 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-10Remove firmware files from local.conf templateJan-Simon Möller1-1/+1
The packages does not exist anymore or was renamed. Change-Id: I6a2203dd23fe6ae61adb1daaf2b24ae84f114589 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-09Append kernel recipe to support config fragments and add common kernel ↵Nathan Illerbrun3-0/+9
config fragments Add machine template for nitrogen6x Change-Id: I63df939008a36d125f80d74d461453c63386e24e Signed-off-by: Nathan Illerbrun <nathani@validmanufacturing.com>
2017-01-04Bump gpu_mem_1024 to 640 to inrease gpu memory for appsJan-Simon Möller1-1/+3
This change mitigates SPEC-390 by increasing the GPU memory available on the rpi2/rpi3 with 1G RAM to 640M. Change-Id: I37fc28daa80e78808baa6d04f0b16647914ac65c Bug-AGL: SPEC-390 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-12-2950_local.conf.inc: Enable CMA within the raspberrypi3 templateMatt Ranostay1-1/+5
Allow the raspberrypi3 GPU to use the CMA dynamic memory split to boost performance. Change-Id: Ia72e7b83f7cca2b6b8a622c632345c748547429b Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-12-23Disable psplash when building for RPi because of occasional crashesAnton Gerasimov1-0/+2
Bug-AGL: SPEC-366 Change-Id: Id15035817fcf110d52354fe4822af93d49b8c9ec Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>