summaryrefslogtreecommitdiffstats
path: root/templates/machine
AgeCommit message (Collapse)AuthorFilesLines
2017-07-12Disable rpi3 tests as they are broken right now with the kernel ImageJan-Simon Möller4-0/+0
Fix is wip but takes a little. Change-Id: I5b561a687dda47aaa8dfbf19d9b629abb3956549 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10127 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> (cherry picked from commit 8f022c868bff1a4f2bfcdc04ea6eb3af20046852) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10149 ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-06-30Fix i.MX6Takashi Matsuzawa3-0/+13
Bug-AGL: SPEC-704 This is part of the fixe to make i.MX6 buildable again. Following fixes are included in this change: - adding build target imx6qsabreauto - fixing qt5.8 build error - refine bblayers.conf layer order (for dynamic-layers) - meta-fsl-arm -> meta-freescale layer name change - weston.ini lines (use fbdev-backend.so) - /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules) - kernel configuraion to include smack, etc. Follwings are stil not addressed yet: - bblayer.conf layer order still have issue re. dynamic-layers - built and booted on imx6qsabreauto only yet. following existing community boards may need update (i have imx6qsabrelite, but no notrogen6x) Note, this fix is prepared independently of nxp or fsl-community, who should follow-up if there are mistakes to be fixed, or updates that they find needed. Update: Refined on review comment regarding tune settings and kernel configurations. The board successfully boots and shows AGL homescreen. But I found I still have problem with USB. lsusb says 'unable to initialize libusb: -99' error which I am still faling to find the cause. Update2: usb issue may be related to dtb configuration in linux-fslc-imx better to be tracked separately Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574 Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9971 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-30m3ulcb-nogfx: add test templates for LAVA job and environmentKevin Hilman2-0/+57
Change-Id: I9c5a95bd33516e8451113dbabf6b6739dc637b7d Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9819 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> (cherry picked from commit ca8367a37ff019862aae48fc5a3d05ad56f084ec) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9877
2017-06-29raspberrypi3-64: test: add LAVA env and job templateKevin Hilman2-0/+59
Change-Id: Iea65e4986f3ab7ea41bcbf98bc63be8f4a4e2eba Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9949 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-06-23agl_raspberrypi*.inc: Set KERNEL_IMAGETYPE to ImageLeon Anavi3-6/+6
Set KERNEL_IMAGETYPE to Image to ensure correct generation of kernel7.img and successful booting of AGL on Raspberry Pi 3 and 2 with output from the serial console. v2 (jsmoeller): Also adapt templates/machine/raspberrypi3/test/hwtest.short.environment v3 (jsmoeller): disable CI hwtests as rpi firmware is used Bug-AGL: SPEC-649 Bug-AGL: SPEC-650 Change-Id: If4335ffed7047fd2fbbf4bbd2dff54322cd0bf07 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9727 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
2017-06-23support MACHINE=raspberrypi3-64Kevin Hilman2-0/+4
The meta-raspberrypi layer already supports raspberrypi3-64, where it will build a 64-bit kernel. Add templates so that "aglsetup.sh -m raspberrypi3-64" works. Note that 64-bit kernel build is only supported in the v4.9 branch of the rpi kernel, and that the kernel image type is "Image" instead of Image. Change-Id: Iee728191dc38521be607787d5736d21372f1dff5 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9767 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-05-16dragonboard-410c: install 96boards-tools for resizing partitionKotaro Hashimoto1-0/+2
Add 96boards-tools recipe for dragonboard-410c. This tool resize the rootfs on the first boot. The adding recipe is ported from meta-96boars layer(branch morty). https://github.com/96boards/meta-96boards/ Change-Id: Ica597e36e530533cf4820a3b0a7ad2145bd3d6fb Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9391 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-05-16Add machine templates for the beagleboneJan-Simon Möller2-0/+4
This adds the machine templates for the beaglebone board. The beaglebone is a YP reference system with very good support out-of-the box. It might be too slow for the graphical demos, but could serve well in headless setups. v2: remove whitespace. Bug-AGL: SPEC-590 Change-Id: I3f1d4f57d2ce01f2603446b6663fdaa636a1f7be Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9337 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Karthik Ramanan <a0393906@ti.com> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Reviewed-by: Martin Kelly <mkelly@xevo.com>
2017-05-06Enable lava test-run on vayu boardJan-Simon Möller4-0/+64
This adds the necessary templates to run the CI boot tests also on the TI dra7xx-evm 'vayu'. Change-Id: I9e6303c30bd68db91f5b36b2984f6ef91fa4297d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9295 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-04-30Enable test-run on porterboardJan-Simon Möller4-0/+62
This adds the necessary templates to run the CI boot tests also on the Renesas gen2 'porter'. Change-Id: I2fee98d3acde704fc0762898c4785c897b9eaaf8 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/8635 Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-03-19[rcar-gen3] Update h3 m3 to renesas rcar gen3 BSP v2.16.0 (branch:morty)Ronan Le Martret3-3/+3
Bug-AGL: SPEC-471 Change-Id: Ifb43484b96160b22fe24f446d5560a8796a90e48 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2017-02-19Add template for Altera Cyclone5Jan-Simon Möller2-0/+4
This adds a first template for the Altera cyclone5 board. The build is not yet complete (failing on some gcc6 issue in qtmultimedia-rtlfm-radio-plugin). A few notes: CFLAGS/Tunings are set to -mfpu=softfp compared to the hardfp of all the other target boards we have. Change-Id: I9b179d9aef610ee5a67166df2dd79a52e2ac6c19 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-26Extend bootloader timeoutJan-Simon Möller1-0/+2
Change-Id: Ia46fba4d730918b9da5062b8b7f12f9e4af3a6e4 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-26Adapt test yaml definition to code changesJan-Simon Möller1-1/+1
Change-Id: I035cad67460b9e6c29f882cd983fe80f653757df Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-26Move feature code into the meta recipesRonan12-560/+24
* Having a minimlal local.conf serving the only purpose of user customization is the "Yocto" way of doing things * After a source synchronization (repo sync), feature code must be update without regenerate local.conf Change-Id: I0bb0861f4c07a8b57cb59a03f6ffe9d2d693cbbe Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2017-01-20enhance hw testsJan-Simon Möller2-3/+5
Change-Id: I4796047143e1fd2d2f74a22373ce6c85996a7ae3 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-19Reenable sota sdcard image for rpiJan-Simon Möller1-1/+1
Change-Id: I5801a2bc252a581eb82c7c540e4d546882f1ca62 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-18Add hwtest enable flags for rpi3Jan-Simon Möller4-0/+57
Change-Id: Ifc21b44eef0b40657c04e011575cb27f0533d956 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-13prevent used of mesa-gl and bad use of mesaRonan3-6/+6
* use PREFERRED_RPROVIDER_libgbm-dev = "libgbm to prevent used of mesa * use PREFERRED_PROVIDER_virtual/mesa = "mesa" to prevent used of mesa-gl * https://patchwork.openembedded.org/patch/120281/ Change-Id: Ib03137b6a3f2c58ccfc2b9bc568572cc3be802aa Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2017-01-12Define IMAGE_FSTYPES for rpi targetsJan-Simon Möller2-0/+2
Do use our target filesystem types instead of the defaults in meta-raspberrypi. Change-Id: If92013a5a55208f4f644f5c2b239e0052ce370c8 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-12Improve configuration file for rpi2 and rpi3 for morty.Jan-Simon Möller2-17/+40
Change-Id: I3683edc0638f1ceda0c53d96532276aafb3633fc Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-11Revert back to kernel 4.4 until bsp layer catches upJan-Simon Möller2-2/+2
Our bsp adaptation hardcodes the srcrev of the kernel. Thus we stay on 4.4 until ported. Change-Id: I30f962674cdb567c378fac62cde98bc1cf0f2c1e Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-11Disable gstreamer plugins on vayu due to FTBS on mortyJan-Simon Möller1-4/+7
The three gstreamer plugins do not build right now. Disable until fixed. Change-Id: Ie3d60c88fc73423509dbf36055f7585ab8e81e30 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-10Fix version of mesa in rpi templatesJan-Simon Möller2-4/+4
Change-Id: I977a247c07b3520876ef9738a974e74649304516 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-10Remove firmware files from local.conf templateJan-Simon Möller1-1/+1
The packages does not exist anymore or was renamed. Change-Id: I6a2203dd23fe6ae61adb1daaf2b24ae84f114589 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-09Append kernel recipe to support config fragments and add common kernel ↵Nathan Illerbrun3-0/+9
config fragments Add machine template for nitrogen6x Change-Id: I63df939008a36d125f80d74d461453c63386e24e Signed-off-by: Nathan Illerbrun <nathani@validmanufacturing.com>
2017-01-04Bump gpu_mem_1024 to 640 to inrease gpu memory for appsJan-Simon Möller1-1/+3
This change mitigates SPEC-390 by increasing the GPU memory available on the rpi2/rpi3 with 1G RAM to 640M. Change-Id: I37fc28daa80e78808baa6d04f0b16647914ac65c Bug-AGL: SPEC-390 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-12-2950_local.conf.inc: Enable CMA within the raspberrypi3 templateMatt Ranostay1-1/+5
Allow the raspberrypi3 GPU to use the CMA dynamic memory split to boost performance. Change-Id: Ia72e7b83f7cca2b6b8a622c632345c748547429b Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-12-23Disable psplash when building for RPi because of occasional crashesAnton Gerasimov1-0/+2
Bug-AGL: SPEC-366 Change-Id: Id15035817fcf110d52354fe4822af93d49b8c9ec Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-12-20Enabling build for Intel's Joule boardktdinh2-0/+12
This adds neccessary firmware to support the Joule board, including wifi and bluetooth. Change-Id: Ia6973415113119aaf60fff0dbb494027fba96fd5 Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
2016-12-07Enabling HW acceleration for Intel with libva and correct libva incorrect ↵Dominig ar Foll (Intel Open Source)1-0/+7
runtime dependency with x11 Change-Id: I175b0d9900d61546cb0f116a1d698ee1f60b84b7 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net> Correct libva incorrect runtime dependency with x11 Change-Id: Ic4231c217c8c63575a98d370c898b8cb04e3a980 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-05add h3ulcb supportRonan3-0/+61
Change-Id: I9c00765c3c1eece18a80c7b9f16a79a2bb9d2e5a Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2016-12-02Revert "Enabling HW acceleration with libvaapi on Intel by default"Jan-Simon Moeller1-7/+1
Due to: Can't install libva-dev-1.7.0-r0@corei7_64: Can't install libva-egl1-1.7.0-r0@corei7_64: no package provides libva-x11 See https://jenkins-new.automotivelinux.org/job/sandbox-snapshot-master/MACHINE=intel-corei7-64,label=agl-test-slave/146/console We need to fix libva through a bbappend. This reverts commit c678e2d040c6071f3b6bec593d3c6271504a92e7. Change-Id: I486aa82484f8b62c65b7ae1a7607f75ade26ce91 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-28Enabling HW acceleration with libvaapi on Intel by defaultDominig ar Foll (Intel Open Source)1-1/+7
Change-Id: I4efd1d2b8d4b6a6c82c68b572bcd5c9fa7a15ad1 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-11-23meta-rcar-gen3: autoload mmp modulesYannick Gicquel1-0/+2
Add KERNEL_MODULES_AUTOLOAD directive some to multimedia package drivers. Thus after bootup, multimedia framework is ready to use hw acceleration IP. Change-Id: I43a92fdf2dff1f546e5a532b13203efd4a6b829c Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-21meta-rcar-gen3: add template with hw accelerationYannick Gicquel3-0/+59
this introduce gen3 support with egl & multimedia acceleration. Change-Id: Id816c6ae85e2877a1af9203ef893e1db12db5afc Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-14Add newlines at end of fragmentJan-Simon Möller1-1/+2
These are required for proper parsing. Change-Id: I8ade2d0f96ad73f954cd4fd9908c47088def4d8a Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-14templates: add R-Car M3 starter kit (w/o gfx)Yannick Gicquel2-0/+15
Introduce a new template for "m3ulcb" reference design. This machine is intended to be used in CI process, and does _not_ activate Hw acceleration for graphics or multimedia. Change-Id: Ia780dee9a4d75133dfe7f98f09d3e876723d05f6 Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-13Add firmware for wifi on rpi3Jan-Simon Möller1-0/+2
This changeset add the firmware files for the wifi to the image. Change-Id: I3557a50acc3eb80add605fdbdc32fa4af3a747bb Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-13dra7xx-evm: Fix the kernel providerKarthik Ramanan1-0/+3
Change-Id: I8f0c1188e268b938c51b1c1eb0272ce6a9f2951d Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-13dra7xx-evm: add cmem to enable radio functionalityKarthik Ramanan1-0/+1
Change-Id: I3c788409f2b8c40abf3ddba48deae999f4a30954 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-13dra7xx-evm: add platform specific GStreamer pluginsKarthik Ramanan1-1/+3
This patch add the GStreamer plugins for hardware acclerated multimedia and video post processing functionality. Change-Id: I4ebed2e183f46f1d7cf1fb47ccec37dc64a026b6 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-13dra7xx-evm: platform specific additions for gst-badKarthik Ramanan1-1/+5
This patch introduces certain allocators and sinks that will use the platform specific components and provide the base functionality for the GStreamer accelerator plugins. Change-Id: Iad16f61eefb8c71933efb9109652aed008939203 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-13dra7xx-evm: add support for multimedia accelerationKarthik Ramanan1-0/+14
TI Jacinto 6 has hardware multimedia acceleration capability. This patch introduces the firmware and IPC components that are needed to control the hardware accelerators. Change-Id: I795c820f9bb87dd77ad227ce7c80f879dd935e54 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-12Add ota draft for ota imageJan-Simon Möller1-0/+5
Change-Id: I953bca77105e5470362baa97e4e5ae0061b4d2ae Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-10dra7xx-evm: add support for graphics accelerationKarthik Ramanan1-0/+24
TI Jacinto 6 has a 3D GPU that can used to accelerate the graphics processing requests. This patch replaces the default graphics drivers and user space libraries only for the dra7xx-evm MACHINE Change-Id: I1a53594f0fa4dc8fabd16f9ce2c765dd32b9e142 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-04Add u-boot image class when sota feature is enabledAnton Gerasimov4-3/+12
Change-Id: I7ad6fc95f4252424ded09bc1d6d5ab18bf6733fd Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-11-04Generate OTA-enabled live image when building with agl-sotaAnton Gerasimov1-0/+4
Bug-AGL: SPEC-307 Change-Id: I5ac3c3dad370545a33ce81071a4a15cdb261fa7a Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-10-28Move machine-dependent sota configuration to machine templatesAnton Gerasimov5-0/+29
Change-Id: Icb03b2163d7e36a54f27bee78570240c5d337107 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-10-26Generalize EULA functions and apply to imx6qsabreliteJan-Simon Möller1-0/+2
This change generalizes the *_setup_EULA*.sh scripts to work with custom layouts. The 50_setup.sh of the machine template just needs to call find_and_ack_eula <layerfolder> [<EULA_FILENAME_relative_to_layerfolder>] The EULA_FILENAME is optional. Also an optional EULA_FLAG_NAME can be exported which will be used for the layer.conf. If no EULA_FLAG_NAME is set, we'll default to the current ACCEPT_EULA_$MACHINE. Change-Id: I03a4551e1cf088dce0b13aa5e38f606d67e0fb29 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>