summaryrefslogtreecommitdiffstats
path: root/templates/machine
AgeCommit message (Collapse)AuthorFilesLines
2019-11-06raspberrypi*/50_local.conf.inc: Update rpi 3/4Leon Anavi2-9/+0
Use the same versions for Linux kernel and Mesa on both Raspberry Pi 3B/B+ and 4. This allows to run firmware KMS that supports HDMI and the official 7" Raspberry Pi touch screen DSI display. Bug-AGL: SPEC-2465 Change-Id: I7ae5739bbb6b8d2efd3264d3d1eab9c28e6f2559 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-09-20raspberrypi*/50_local.conf.inc: Set Mesa versionLeon Anavi2-0/+7
Use Mesa 18.1 for Raspberry Pi 3 and Mesa 19.1 for Raspberry Pi 4. With the older version of Mesa Weston and the home screen doesn't launch properly on Raspberry Pi 4 therefore version 19.1 has been ported from master branch of layer openembedded-core to layer meta-agl-bsp/meta-raspberrypi. This solution is temporary until the next major update of AGL from Yocto Project release Thud to a newer release. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I7b3d87a42c6e65014705d98bfbd8ebdabb48eadd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-09-04Add nogfx build for h3ulcbJan-Simon Moeller3-0/+20
Before we can add the h3 to CI we need a -nogfx build. v3: leave the BBMASK in the board specific file due to inc file stacking. Change-Id: Ic59784aa143e3346d2f999060214411497fc1b54 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-08-06machine: Add readme for ebisuPierre Marzin1-0/+44
Bug-AGL: SPEC-1902 Change-Id: I73fcf4da0e96497ee98a043bdc8d7cc1da1b11a6 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-24templates: Add templates for Raspberry Pi 4Leon Anavi2-0/+6
Add local.conf and bblayears.conf templates for Raspberry Pi 4. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I51fb521e4cb8e963420cbe7c68272299a592840e
2019-07-24add markdown documentation for all machines and featuresStéphane Desneux19-0/+171
THIS IS STILL WIP - not all features/machines are described Bug-AGL: SPEC-1902 Change-Id: I9bd5a3f57946199e1da90cfbed020742710218a1 Signed-off-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2019-07-23ebisu: Add the support of a custom setup scriptPierre Marzin1-5/+10
Used to customise a setup to add specific stuff. Bug-AGL: SPEC-2564 Change-Id: I8d18d026aaeb7c35a53164ea2f1a62f510ad4217 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-23ebisu: Use a specified path to integrate binariesPierre Marzin1-4/+19
E3 binary should be ZIPped into one archive and the path to its location should be exported to the environnement before setting up the AGL build. Bug-AGL: SPEC-2564 Change-Id: Ie26ba0246e7fbd0fe923fcbe0f4b4160c6d7e0f2 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-23ebisu: Update setup fragment to copy binariesPierre Marzin1-4/+16
Use copy_proprietary_softwares.sh script to manage the zip binaries pasted into "$METADIR/binary-tmp". Bug-AGL: SPEC-2564 Change-Id: I256d1200e03ab9a9482e29d7f42016f99c7ba16c Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-23machine: Add new ebisu machinePierre Marzin3-0/+19
* Add ebisu dependency within renesas bootfiles * Delete rcar ADAS layers support * Add weston video output config * Add missing modules and gst plugin Bug-AGL: SPEC-2564 Change-Id: I61a44f831d0bc55210847eade2a1eacc7599fa74 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-06-20Add cubox-i and nitrogen6x i.MX6 machinesScott Murray6-0/+23
Add the cubox-i (covering SolidRun Cubox-i, Hummingboard Gate and Edge), and nitrogen6x (covering Nitrogen 6x and SABRE Lite) machine definitions. Note that support for the Broadcom Bluetooth chipset on the SolidRun i.MX6 SOM is currently missing, as it requires firmware that is not available in either the linux-firmware package or from the firmware packages provided by meta-freescale. Bug-AGL: SPEC-2517 Change-Id: If7bdb9f1af9bb67dba5c1ff836a6d3b04160fefd Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-06-11Import aglsetup templates and config for BBEPaul Barker2-0/+7
The templates and config include files used with aglsetup.sh to build for the Sancloud BBE are imported from the meta-sancloud layer. This should make future maintenance easier. The templates are updated to match the new repository structure at the same time. Bug-AGL: SPEC-2507 Change-Id: I2b4717bd79d949a12b13e6bfece152e82bb8114c Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-06-10Changes to support the repo clone reworkJan-Simon Möller13-14/+14
To be merged together with: https://gerrit.automotivelinux.org/gerrit/#/c/AGL/AGL-repo/+/21389/ v2: fix the aglsetup script v3: fix scripts to extract m3ulcb v4: use single folder for BSPs Bug-AGL: SPEC-2450 Change-Id: I3227896c68ec1413f55cf67ad8f15a7adfe87a52 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-21Remove the 64bit rpi3 targetJan-Simon Möller2-4/+0
As memory is already low on 32-bit, the 64-bit target is deprecated for now. There is no benefit in maintaining two targets atm. Change-Id: I29d755ff70693280dcc1e4ce996bd4c2894bacfb Bug-AGL: SPEC-2323 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-29Merge "Add ARC HSDK board support"Jan-Simon Moeller2-0/+4
2019-04-29Merge "Remove inactive devices"Jan-Simon Moeller10-29/+0
2019-04-29Remove inactive devicesJan-Simon Möller10-29/+0
Remove device which are EOL, unused or do not work. As discussed during the SAT call: - rpi2 : -- will not work for IVI due to the CPU -- use the rpi3 instead - joule : -- EOL for ~1y, no longer available for purchase, no way to test. i.MX6: Remove currently unmaintaned boards. Can re-add on request. - imx6qsabrelite: -- replaced with uprev'd imx6qsabreauto -> imx6qdlsabreauto - nitrogen6x: -- no thud branch upstream. Bug-AGL: SPEC-2323 Change-Id: I28a70dcb7b48b6a9396d3003cc34d4c1f6570eca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-26Add ARC HSDK board supportEvgeniy Didin2-0/+4
This changeset adds the necessary files to build image for Synopsys ARC HS Development Kit (HSDK). Most of necessary tunnings are stored in meta-synopys layer. Synopsys DesignWare HSDK (which stands for ARC HS Development Kit) is the latest and greatest development platform that sports quad-core ARC HS38 in real silicon. Most noticeable features of the board are: * Quad-core ARC HS38 CPU running at 1GHz * 4Gb of DDR * Built-in Vivante GPU * Built-in Wi-Fi/Bluetooth module Peripherals: * [micro] SD-card slot * 2 USB 2.0 ports * 1Gbit Ethernet port * Built-in Digilent JTAG probe * Serial port accessible via micro-USB port New feature: SPEC-2346 Change-Id: I8772ee51cc3db9f6549da2d6a5ea2d116586cde6 Signed-off-by: Evgeniy Didin <didin@synopsys.com>
2019-04-23Fix imx6qdlsabreauto machine configurationBechir Mghirbi4-6/+4
The imx6qsabreauto target was falling behind and could not be build for GG-7.0. The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro. However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets. This patch makes the required changes to fix the imx6qsabreauto machine configuration: - removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro - updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer - deletes reference to packagegroup-fscl-* not required to build AGL - add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon' v2 (jsmoeller): moved board name to match MACHINE v3 (bechir.mghirbi): - remove wayland_2.0.0 as weston_4.0.0.imx is used. - use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - Add CFG80211 Kernel configuration Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-16Add machine templates for qemuarm and qemuarm64Jan-Simon Möller2-0/+6
This changeset adds the necessary tepmlates to build the qemu targets for ARM 32bit and 64bit. The MACHINE names are 'qemuarm' and 'qemuarm64'. As the compiler flags for qemuarm in Yocto are using the equivalent of armv5te, we need to ship our own machine/qemuarm.conf with our default tuning for armv7-a (YP name armv7ve), and overrides to build a v7 kernel and use a v7 capable QEMU machine. For qemuarm64, some additional kernel configuration is enabled to allow building and loading of the MOST drivers. Bug-AGL: SPEC-756 Change-Id: I0a688a1d61a75f1287902fc2733a8a54b0485a34 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-07-29Fix old bbappend in meta-qcomJan-Simon Möller1-0/+1
meta-openembedded already moved to 3.16 and there is no update in meta-qcom, yet. Change-Id: Iefbdf9bef83c01e4e37895d445d538d9e4f79957 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-06-28[GEN3 KF] Configure GPS deviceRonan Le Martret3-0/+9
* For the Renesas Gen3 extention board Kingfisher, we must specify the GPS device for gpsd service. * Create a new machine type kingfisher. Bug-AGL: SPEC-1538 Change-Id: If6b7e49f6a006218e57c58e15855e0d65eb849cd Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-03-20Add kingficher supportRonan Le Martret3-0/+3
Change-Id: I75b9ced887249380a6164296b73acaaca91e3060 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-03-07Add db-820c as community boardJan-Simon Möller2-0/+4
Add templates for the db-820c as community board alongside the 410c. Only works with rocko/master. v2: - fixed 96board-tools inclusion - added kernel bbappend Change-Id: I411505ae0aeb5939338bb94f5db04c2572fc6612 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-02-20Remove old boards for rockoJan-Simon Möller3-9/+0
Old boards being removed: - porter templates - wandboard (untested) - qemux86 (qemux86-64 - aka 64bit - is the only default) Change-Id: Ia366cdeac988780dc3253e20357b868b3b6b8070 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-02-13Remove porter machineronan5-30/+0
Change-Id: I5378836e8f00d25f4842f3cb28ad586dfa2097bb Signed-off-by: ronan <ronan.lemartret@gmail.com>
2018-02-13dragonboard-410c: remove ACCEPT_EULA settingKotaro Hashimoto1-1/+0
Since r1032.1 the Qualcomm firmware have been released with a license that allows redistribution. And the file is now available publicly without the need for user to read/accept EULA. As such, we remove the constraint on meta-qcom as well. http://git.yoctoproject.org/cgit/cgit.cgi/meta-qcom/commit/?h=rocko&id=f99e865f8944bc5a935a87bf289d322e898413cd Bug-AGL: SPEC-1181 Change-Id: Icbf71cce5c7f1f43fdc44c741b95fe62911064d4 Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
2018-02-05bsp: add salvator-x H3 supportMartin Kelly3-0/+17
The Salvator-X uses the same SoC as the H3 but includes other peripherals. As a result, it can reuse the same h3ulcb config but needs a different device tree and kernel config. This is already supported in meta-rcar-gen3 but needs AGL plumbing, so add it. There is also an M3 version of the Salvator-X, but I don't have one and cannot test it. So I've added support only for the H3 version here. Change-Id: I64683f4f65dda3fee63e6243f0ba916e568ca245 Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-01-04templates/machine: remove unused test dirsKevin Hilman21-317/+0
The "test" dir of the machine templates is no longer used by the Jenkins job builder tools (ci-management). Remove them. Change-Id: Ice2ee89d7fba4f5cce763f71e4a4b206fa04b98c Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-10-31meta-agl-bsp: templates: update of nitrogen6x machine templateMihail Grigorov1-0/+0
Bug-AGL: SPEC-905 Change-Id: I959a9f8d085b0fb247998790191c3dcf2e4e34fa Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11567 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Matt Porter <mporter@konsulko.com>
2017-10-31imx6qsabrelite starts to using 'meta-boundary' layerMihail Grigorov1-0/+1
a) Adding 'meta-boundary' to bblayers.conf. b) Prevent of build errors from missing bb files (firefox, chromium), with help of BBMASK variable. Bug-AGL: SPEC-905 Change-Id: Id0b823d4f0e8977206dbd22684e0d2cf9e88465f Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11569 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Matt Porter <mporter@konsulko.com>
2017-10-14meta-agl-bsp: imx6: Update the imx6qsabrelite machine templateMihail Grigorov4-6/+7
* Add include/agl_imx6qsabrelite.inc * Change the FSL layer from meta-fsl-* to meta-freescale-* * Rename 50_bblayers.conf.inc to 40_bblayers.conf.inc Bug-AGL: SPEC-905 Change-Id: I29563fa7bc25240018383fba2b30e2171366282a Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11307 Reviewed-by: Leon Anavi <leon.anavi@konsulko.com> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-08-09m3ulcb-nogfx: enable HW testsKevin Hilman3-1/+3
v2: fix MACHINE_NAME Change-Id: I54fbed432ffe3cf023629f8c98879f274d6d00c0 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9851 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-08-04raspberrypi: Fix U-Boot supportTom Rini5-10/+10
In order to use U-Boot on the raspberrypi3 we need to have the equivalent of the following commit from upstream meta-raspberrypi: commit 67e02164929a7d8cc187315aaaab60f6f3aaf422 Author: Paul Barker <paul@paulbarker.me.uk> Date: Mon Feb 13 23:32:43 2017 +0000 u-boot: Fix boot on rpi3 With that done, we can re-enable U-Boot support for raspberrypi3. With this done we can also now re-enable testing, so do so. For consistency we can now switch raspberrypi2 over to U-Boot as well. Change-Id: I9c96a66bf5644bf63f2566559ab7d9c4101b7a55 Bug-AGL: SPEC-409 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10491 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-24tests: enable HW test for QEMU x86-64Kevin Hilman2-0/+2
Change-Id: Ic7d19e6fc9e682a5a885cb572200ce178cf3da1f Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10241 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-07-21tests: templates/qemux86-64: KVM updatesKevin Hilman1-1/+1
Updated QEMU commandline arugments to those known to have been validated and working with KVM and with AudioManager and HomeScreen. Change-Id: I7ac722d4cc49dd04db1bd4715ae737e1f21eb36b Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10307 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-21tests: templates/qemux86-64: enable QEMU audio driverKevin Hilman1-1/+1
Add "-soundhw hda" to QEMU command-line so that GENIVI AudioManager will start up successfully. Change-Id: I50136f664fd1d4712ad646f751f596f54ba49905 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10247 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-19tests: templates/qemux86-64: add MACHINE name to rootfs filenameKevin Hilman1-1/+1
Change-Id: I99457bbef1d5b1e0bdb07ba44898652d447d8593 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10239 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-19tests: templates/qemux86-64: add (empty) DTBKevin Hilman1-0/+1
The JJB templates expect there to be a $DEVICE_DTB in various places, and if not set here, will have a default value (from rpi3). Change-Id: I3ae10a6fcf4f8f85dc49e45696a982ad85b29203 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10243 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-18qemux86-64: add hwtest environmentKevin Hilman1-0/+9
Change-Id: Ic52335b32d82257a2c9c451e7dc83dcaef17b11e Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10191 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-17Update freescale layer names, add nitrogen inc fileNathan Illerbrun3-3/+5
Change-Id: I1faf7ad14cc85cd12055f7e4c7e43ffe4ccf0671 Signed-off-by: Nathan Illerbrun <nathani@validmanufacturing.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10203 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-10Disable rpi3 tests as they are broken right now with the kernel ImageJan-Simon Möller4-0/+0
Fix is wip but takes a little. Change-Id: I5b561a687dda47aaa8dfbf19d9b629abb3956549 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10127 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-07-08test templates: m3ulcb-nogfx: use core-image-minimalKevin Hilman1-1/+1
The -nogfx build uses the core-image-minimal target, not the agl-demo-platform build target, so ensure the NBD rootfs filename is the right one. Change-Id: I81fa24a55cfa6acfbeda987f31d6dca5fea9dd52 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10119 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-30Fix i.MX6Takashi Matsuzawa3-0/+13
Bug-AGL: SPEC-704 This is part of the fixe to make i.MX6 buildable again. Following fixes are included in this change: - adding build target imx6qsabreauto - fixing qt5.8 build error - refine bblayers.conf layer order (for dynamic-layers) - meta-fsl-arm -> meta-freescale layer name change - weston.ini lines (use fbdev-backend.so) - /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules) - kernel configuraion to include smack, etc. Follwings are stil not addressed yet: - bblayer.conf layer order still have issue re. dynamic-layers - built and booted on imx6qsabreauto only yet. following existing community boards may need update (i have imx6qsabrelite, but no notrogen6x) Note, this fix is prepared independently of nxp or fsl-community, who should follow-up if there are mistakes to be fixed, or updates that they find needed. Update: Refined on review comment regarding tune settings and kernel configurations. The board successfully boots and shows AGL homescreen. But I found I still have problem with USB. lsusb says 'unable to initialize libusb: -99' error which I am still faling to find the cause. Update2: usb issue may be related to dtb configuration in linux-fslc-imx better to be tracked separately Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574 Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9871 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-29raspberrypi3-64: test: add LAVA env and job templateKevin Hilman2-0/+59
Change-Id: Iea65e4986f3ab7ea41bcbf98bc63be8f4a4e2eba Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9769 Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-28m3ulcb-nogfx: add test templates for LAVA job and environmentKevin Hilman2-0/+57
Change-Id: I9c5a95bd33516e8451113dbabf6b6739dc637b7d Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9819 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-23agl_raspberrypi*.inc: Set KERNEL_IMAGETYPE to ImageLeon Anavi3-6/+6
Set KERNEL_IMAGETYPE to Image to ensure correct generation of kernel7.img and successful booting of AGL on Raspberry Pi 3 and 2 with output from the serial console. v2 (jsmoeller): Also adapt templates/machine/raspberrypi3/test/hwtest.short.environment v3 (jsmoeller): disable CI hwtests as rpi firmware is used Bug-AGL: SPEC-649 Bug-AGL: SPEC-650 Change-Id: If4335ffed7047fd2fbbf4bbd2dff54322cd0bf07 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9727 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
2017-06-23support MACHINE=raspberrypi3-64Kevin Hilman2-0/+4
The meta-raspberrypi layer already supports raspberrypi3-64, where it will build a 64-bit kernel. Add templates so that "aglsetup.sh -m raspberrypi3-64" works. Note that 64-bit kernel build is only supported in the v4.9 branch of the rpi kernel, and that the kernel image type is "Image" instead of Image. Change-Id: Iee728191dc38521be607787d5736d21372f1dff5 Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9767 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-05-16dragonboard-410c: install 96boards-tools for resizing partitionKotaro Hashimoto1-0/+2
Add 96boards-tools recipe for dragonboard-410c. This tool resize the rootfs on the first boot. The adding recipe is ported from meta-96boars layer(branch morty). https://github.com/96boards/meta-96boards/ Change-Id: Ica597e36e530533cf4820a3b0a7ad2145bd3d6fb Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9391 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-05-16Add machine templates for the beagleboneJan-Simon Möller2-0/+4
This adds the machine templates for the beaglebone board. The beaglebone is a YP reference system with very good support out-of-the box. It might be too slow for the graphical demos, but could serve well in headless setups. v2: remove whitespace. Bug-AGL: SPEC-590 Change-Id: I3f1d4f57d2ce01f2603446b6663fdaa636a1f7be Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9337 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Karthik Ramanan <a0393906@ti.com> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Reviewed-by: Martin Kelly <mkelly@xevo.com>