aboutsummaryrefslogtreecommitdiffstats
path: root/templates/machine
AgeCommit message (Collapse)AuthorFilesLines
2021-01-16meta-agl-bsp, templates: Add virtio-aarch64 machineVasyl Vavrychuk3-0/+19
This machine is intended to run in ARMv8 virtualized environment that provides VirtIO devices. AGL machine configuration files are based on qemuarm64 machine from meta-agl branch master commit e1da0efcd2eece82b0326798cfeaeb8dd48797fc. Yocto machine configuration files are based on qemuarm64 machine from Poky branch dunfell commit 4e931b1d05018923dc145cd97f6f965f5cb6e1a5. Yocto Linux Kernel is used as recommended in [1]. Its metadata for the created machine are based on qemuarm64-standard.scc from yocto-kernel-cache branch yocto-5.4 commit 4aeda12f7f7eb84613ae1fe6e22cd9cd9790c20b. The rationale behind creating new machine is a wish to have a machine that could run on other hypervisor/virtual machine monitor that implements VirtIO, not necessary QEMU. For now, virtio-aarch64 machine runs under QEMU and OpenSynergy COQOS Hypervisor. virtio-aarch64 machine includes following changes comparing to qemuarm64: * use virtio-gpu instead of VGA display (to be upstreamed to work in conjunction with runqemu gl, sdl, etc. options) * use virtio-bus instead of PCI bus QEMU devices * remove unneeded configurations Changes are moved here from meta-agl-devel. [1]: https://www.yoctoproject.org/docs/3.1.2/bsp-guide/bsp-guide.html#released-bsp-recommendations Bug-AGL: SPEC-3668 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Change-Id: I653ca35fded3d3e38f25299f46629db1174b5008 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25915 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-16templates: qemuriscv64: Initial commit of qemuriscv64 machineAlistair Francis2-0/+12
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Change-Id: I50a966dcbe051ae5369e28291e5bb62cd40267b9 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25105 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-15Include meta-arm-toolchain layer when using meta-armPaul Barker3-0/+3
After recent changes on both the dunfell and master branches of the meta-arm layer, we now need to also include the meta-arm-toolchain layer (from the same repository) to allow builds to succeed. Bug-AGL: SPEC-3732 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I6a3e430edaa87d1f684f83a7211a59c62f120add Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25801 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-08-19Add imx8mqevk machine that uses etnavivScott Murray5-2/+25
To enable debugging/development of the etnaviv driver against the GC7000L GPU in the i.MX8MQ, add a "imx8mqevk" template that uses etnaviv instead of Vivante. Since there seem to be some issues with respect to GPU hangs and resulting graphical corruption, the existing "imx8mqevk-viv" template that uses Vivante has been retained for now. Bug-AGL: SPEC-3520 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If5b84c6021994cce0f30410985b1ec4678e718ef Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25058 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-16Synopsys,HSDK: Return files for HSDK boardEvgeniy Didin3-0/+13
Lets return HSDK board support as the meta-synopsys layer now is compatible to yocto dunfell. Signed-off-by: Evgeniy Didin <didin@synopsys.com> Change-Id: I3f11b9f8f5790d2513635beb05ec8e7584ebccc4 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25024 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-10[RCAR] Fix renesas bsp path in ebisu scriptRonan Le Martret1-2/+2
Bug-AGL: SPEC-3443 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: Ief197eaba04e8c5993c050a77e76a504cc7c3b16 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24959 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-10[RCAR] Fix Renesas BSP path for h3-salvatorRonan Le Martret1-1/+1
Bug-AGL: SPEC-3443 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I8ffb32570c1dcf1d68916ecf817aeef2192de81b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24958 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-10[RCAR] Add/update description for Renesas machineRonan Le Martret8-24/+43
Bug-AGL: SPEC-3443 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: Ia0c9e87ae374d1a0e69ea89a72cc3c0cbe91efbd Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24957 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-10[RCAR] Delete useless nogfx machineRonan Le Martret6-30/+0
BUG-AGL: SPEC-3443 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: Ic9614ba6841ec2cfd2617ee0ca28aeaebc47a7fb Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24956 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-07Refactor the m3ulcb machine templatesJan-Simon Moeller10-11/+31
This splits the machine templates for the m3 into three: - m3ulcb = plain m3ulcb with graphics driver package - m3ulcb-nogfx = plain m3ulcb without graphics driver package - m3ulcb-kf = m3ulcb with kingfisher baseboard and graphics driver package This improves maintainability of the m3ulcb machine targets. Bug-AGL: SPEC-3443 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Ib878833709ddc7f706fd15107bfb8dee4272d431 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24913 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-07-07Refactor the h3ulcb machine templatesJan-Simon Moeller9-10/+31
This splits the machine templates for the h3 into three: - h3ulcb = plain h3ulcb with graphics driver package - h3ulcb-nogfx = plain h3ulcb without graphics driver package - h3ulcb-kf = h3ulcb with kingfisher baseboard and graphics driver package This improves maintainability of the h3ulcb machine targets. Bug-AGL: SPEC-3443 Change-Id: Ibca5e7615ca5bc467ec46d4564f42363a2a5466c Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24912 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-07-07Use upstream meta-renesas from github and update meta-rcar-gen3-adas integrationJan-Simon Moeller8-9/+9
Thanks to the work done by Renesas and members of our community, we can now directly use meta-renesas from upstream github. A shout-out to everyone involved (Kurokawa-san, Ronan, Stephane). It turned-out it is simpler to create a symlink-based slim version of meta-rcar-gen3-adas layer instead of BBMASK'ing what should not be in there. See the comments in meta-agl-bsp/meta-rcar-gen3-adas/conf/NOTES as to why. Remaining work is to include the packages outside of the layer.conf in a follow-up. Bug-AGL: SPEC-3380 Change-Id: I2be1b44049d74146546380e2eb866f0558a26822 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24796 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-07-07Remove deprecated bsp files from meta-aglJan-Simon Möller3-13/+0
- hsdk does not have a dunfell branch - meta-intel was deprecated in favour of a unified qemux86-64 target - sdcard_image-socfpga is deprecated as upstream changed to use wic Bug-AGL: SPEC-3468 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Ie79fc9c379bd6260a18fe6fe0115d9ce8de1017f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24918 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com>
2020-06-30[RCAR] Remove meta-rcar-gen3-adas from machine confRonan Le Martret9-21/+0
* Machine h3-salvator-x, m3-salvator-x, ebisu do not need meta-rcar-gen3-adas. Only board allowing kingfisher extention need meta-rcar-gen3-adas. Bug-AGL: SPEC-3463 Change-Id: Id070f9d8ca797aa304a2fb1016ecc65f67f3c44f Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24895 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-06-24Revert "Fix m3ulcb/m3ulcb-nogfx h3ulcb/h3ulcb-nogfx builds"Ronan Le Martret8-20/+8
This reverts commit 207b42d00d129aeb7768dadb0965a5ef6cd86ca0. This reverts commit c24cdffea9dfa3904fc3ea9da0bc80e5515b078d. Bug-AGL: SPEC-3380 Change-Id: I2e29c1bc862d29d61a4529ee722b758fca6a42e0 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24759 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-06-24Remove meta-intel in favour of qemux86-64 as combined targetJan-Simon Möller4-13/+1
the qemux86-64 target will build bootable media for x86 targets (virtual and physical). Thus we do not need another config anymore. For compatibility, do a symlink intel-corei7-64 -> qemux86-64 when selecting the machine. Bug-AGL: SPEC-2931 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: I65aab61680d982ccfb1d9146bead591a6cfd1dd3 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24792 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
2020-06-01Fix m3ulcb/m3ulcb-nogfx buildsScott Murray4-4/+10
Temporarily disable the Kingfisher support layer in the m3ulcb and m3ulcb-nogfx machine templates as was done for the h3ulcb templates. This fixes building with these machine types. Bug-AGL: SPEC-3380 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ib54490ef95582909a34c9d3001283c40debf241b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24589 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-05-21templates/machine/bbe: Populate the README file with some linksPaul Barker1-5/+8
Also use the general Yocto/AGL Sancloud mailbox in the authors tag. Bug-AGL: SPEC-3372 Change-Id: I7f56db2b7ddc1333753f38e83d7e37c97705ee53 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24557 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Scott Murray <scott.murray@konsulko.com>
2020-05-21templates/machine/bbe: Re-enable SanCloud BBE supportPaul Barker4-1/+0
Bug-AGL: SPEC-3372 Change-Id: Iac7417e40c39facc12edc8e312d5295d993f69f4 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24556 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-05-12Update Raspberry Pi (3/4) templates to match meta-raspberrypi configurationJan-Simon Möller1-7/+3
Update the templates to use the updated flags and configuration present in meta-raspberrypi. The previous template did not properly pull-in the u-boot fragments for the RPI4. v4: the MACHINE in the AGL template for the RPI4 is now 'raspberrypi4-64' as in upstream. CI will get support-patches through releng-scripts. Bug-AGL: SPEC-3368 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Ia2acb54516464d433c64adfc7ba832ccfdf899c3
2020-05-12Add i.MX8MQ EVK supportScott Murray4-0/+19
Add imx8mqevk-viv machine template for i.MX8MQ EVK which uses the default Vivante driver configuration in meta-freescale with the new community linux-fslc-imx kernel. The following additional changes have been made to support this: - A linux-fslc-imx bbappend has been added to pull in the AGL kernel configuration, and a imx8mq-evkb config fragment has been added to enable the required Wifi driver for the updated EVKB board. - Stale qtbase and weston-init bbappends/patches have been removed from meta-agl-bsp/meta-freescale-layer. - The meta-agl-profile-graphical Weston 8.0.0 bbappend has been renamed to 8.0.% so the wildcard will apply it to meta-freescale's weston_8.0.0.imx recipe. Known issues: - The required PipeWire configuration for the onboard audio needs further investigation. Bug-AGL: SPEC-3258 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I4ea5437ef0ea8bedb9dd2157f2822ff25ee56cff
2020-04-27Temporary workarounds for h3ulcb and bbeJan-Simon Möller8-4/+11
To allow the dunfell upgrade to be done early, these changes are necessary: - h3ulcb : disable kingfisher support layer - bbe : temporarily replace sancloud bbe machine template with plain beaglebone Both boards need updated BSPs for dunfell. Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Id481b693022a2276c4d5f835e4a23d436681a2cd
2020-04-27meta-agl-bsp: dra7xx-evm/beaglebone updates for dunfellScott Murray3-2/+9
Changes: - Rename weston bbappend for weston 8.0.0 in dunfell. - meta-ti now requires the meta-arm layer as the upstream source of the optee recipe, so add it to bblayers.conf in the machine templates. This is dependent on a manifest update to add meta-arm. Bug-AGL: SPEC-3302 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ib6b40d3aa1d2b04239b6e5343eb818f3f49af8ef
2020-03-18Support Salvator-X/XS boardDuy Dang13-1/+75
Add new machines to build with AGL: - h3-salvator-x-nogfx - h3-salvator-x - m3-salvator-x-nogfx - m3-salvator-x Bug-AGL: SPEC-3169 Change-Id: I0cfa838ad40f8afda01aeb693fbf595bad8b4730 Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
2020-02-17zeus updates for dragonboard-410cScott Murray1-1/+1
Changes: - Update BBMASK definition in template to avoid new warning. - Rename linux-linaro-qcomlt bbappend to use a wildcard to cover both the new 5.4 kernel in meta-qcom and still the older 4.x kernels in that BSP that a user might configure instead. Bug-AGL: SPEC-2932 Change-Id: I8a735a38409822e7069cc84bc2a42c06d351a278 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-11-19raspberrypi4/50_local.conf.inc: Use Image formatLeon Anavi1-0/+5
Use the "Image" format for 64-bit AGL images for Raspberry Pi 4. Bug-AGL: SPEC-2936 Change-Id: I4c671ed3cc775cd3356cb2e35a8ac73efd54603e Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-19ebisu: Update setup.sh to adopt multiple zip fileHarunobu Kurokawa1-1/+4
Bug-AGL: SPEC-2564 Change-Id: I4462128c52b70ab6e5abcba5d89bf5b02cc79e17 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-11-05raspberrypi*/50_local.conf.inc: Update rpi 3/4Leon Anavi2-9/+0
Use the same versions for Linux kernel and Mesa on both Raspberry Pi 3B/B+ and 4. This allows to run firmware KMS that supports HDMI and the official 7" Raspberry Pi touch screen DSI display. Bug-AGL: SPEC-2465 Change-Id: I7ae5739bbb6b8d2efd3264d3d1eab9c28e6f2559 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-09-19raspberrypi*/50_local.conf.inc: Set Mesa versionLeon Anavi2-0/+7
Use Mesa 18.1 for Raspberry Pi 3 and Mesa 19.1 for Raspberry Pi 4. With the older version of Mesa Weston and the home screen doesn't launch properly on Raspberry Pi 4 therefore version 19.1 has been ported from master branch of layer openembedded-core to layer meta-agl-bsp/meta-raspberrypi. This solution is temporary until the next major update of AGL from Yocto Project release Thud to a newer release. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I7b3d87a42c6e65014705d98bfbd8ebdabb48eadd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-09-05Add nogfx build for h3ulcbJan-Simon Moeller3-0/+20
Before we can add the h3 to CI we need a -nogfx build. v3: leave the BBMASK in the board specific file due to inc file stacking. Change-Id: Ic59784aa143e3346d2f999060214411497fc1b54 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-09-04Revert "Add nogfx build for h3ulcb"Jan-Simon Moeller3-20/+0
This seems to have broken master. Needs to be edited. Thus revert and resubmit. This reverts commit dd21b3a6e340006d2ef4036cabf33c9e9a66e9ac. Change-Id: I2423dacba83813cc6350096c89d80cf1d23e9568
2019-09-03Add nogfx build for h3ulcbJan-Simon Moeller3-0/+20
Before we can add the h3 to CI we need a -nogfx build. v2: moved common bits Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I9d64764fbe69dc901dc91941db1deb0073e2ae9c
2019-08-06machine: Add readme for ebisuPierre Marzin1-0/+44
Bug-AGL: SPEC-1902 Change-Id: I73fcf4da0e96497ee98a043bdc8d7cc1da1b11a6 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-24templates: Add templates for Raspberry Pi 4Leon Anavi2-0/+6
Add local.conf and bblayears.conf templates for Raspberry Pi 4. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I51fb521e4cb8e963420cbe7c68272299a592840e
2019-07-24add markdown documentation for all machines and featuresStéphane Desneux19-0/+171
THIS IS STILL WIP - not all features/machines are described Bug-AGL: SPEC-1902 Change-Id: I9bd5a3f57946199e1da90cfbed020742710218a1 Signed-off-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2019-07-23ebisu: Add the support of a custom setup scriptPierre Marzin1-5/+10
Used to customise a setup to add specific stuff. Bug-AGL: SPEC-2564 Change-Id: I8d18d026aaeb7c35a53164ea2f1a62f510ad4217 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-23ebisu: Use a specified path to integrate binariesPierre Marzin1-4/+19
E3 binary should be ZIPped into one archive and the path to its location should be exported to the environnement before setting up the AGL build. Bug-AGL: SPEC-2564 Change-Id: Ie26ba0246e7fbd0fe923fcbe0f4b4160c6d7e0f2 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-23ebisu: Update setup fragment to copy binariesPierre Marzin1-4/+16
Use copy_proprietary_softwares.sh script to manage the zip binaries pasted into "$METADIR/binary-tmp". Bug-AGL: SPEC-2564 Change-Id: I256d1200e03ab9a9482e29d7f42016f99c7ba16c Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-23machine: Add new ebisu machinePierre Marzin3-0/+19
* Add ebisu dependency within renesas bootfiles * Delete rcar ADAS layers support * Add weston video output config * Add missing modules and gst plugin Bug-AGL: SPEC-2564 Change-Id: I61a44f831d0bc55210847eade2a1eacc7599fa74 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-06-20Add cubox-i and nitrogen6x i.MX6 machinesScott Murray6-0/+23
Add the cubox-i (covering SolidRun Cubox-i, Hummingboard Gate and Edge), and nitrogen6x (covering Nitrogen 6x and SABRE Lite) machine definitions. Note that support for the Broadcom Bluetooth chipset on the SolidRun i.MX6 SOM is currently missing, as it requires firmware that is not available in either the linux-firmware package or from the firmware packages provided by meta-freescale. Bug-AGL: SPEC-2517 Change-Id: If7bdb9f1af9bb67dba5c1ff836a6d3b04160fefd Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-06-11Import aglsetup templates and config for BBEPaul Barker2-0/+7
The templates and config include files used with aglsetup.sh to build for the Sancloud BBE are imported from the meta-sancloud layer. This should make future maintenance easier. The templates are updated to match the new repository structure at the same time. Bug-AGL: SPEC-2507 Change-Id: I2b4717bd79d949a12b13e6bfece152e82bb8114c Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-06-10Changes to support the repo clone reworkJan-Simon Möller13-14/+14
To be merged together with: https://gerrit.automotivelinux.org/gerrit/#/c/AGL/AGL-repo/+/21389/ v2: fix the aglsetup script v3: fix scripts to extract m3ulcb v4: use single folder for BSPs Bug-AGL: SPEC-2450 Change-Id: I3227896c68ec1413f55cf67ad8f15a7adfe87a52 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-21Remove the 64bit rpi3 targetJan-Simon Möller2-4/+0
As memory is already low on 32-bit, the 64-bit target is deprecated for now. There is no benefit in maintaining two targets atm. Change-Id: I29d755ff70693280dcc1e4ce996bd4c2894bacfb Bug-AGL: SPEC-2323 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-29Merge "Add ARC HSDK board support"Jan-Simon Moeller2-0/+4
2019-04-29Merge "Remove inactive devices"Jan-Simon Moeller10-29/+0
2019-04-29Remove inactive devicesJan-Simon Möller10-29/+0
Remove device which are EOL, unused or do not work. As discussed during the SAT call: - rpi2 : -- will not work for IVI due to the CPU -- use the rpi3 instead - joule : -- EOL for ~1y, no longer available for purchase, no way to test. i.MX6: Remove currently unmaintaned boards. Can re-add on request. - imx6qsabrelite: -- replaced with uprev'd imx6qsabreauto -> imx6qdlsabreauto - nitrogen6x: -- no thud branch upstream. Bug-AGL: SPEC-2323 Change-Id: I28a70dcb7b48b6a9396d3003cc34d4c1f6570eca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-26Add ARC HSDK board supportEvgeniy Didin2-0/+4
This changeset adds the necessary files to build image for Synopsys ARC HS Development Kit (HSDK). Most of necessary tunnings are stored in meta-synopys layer. Synopsys DesignWare HSDK (which stands for ARC HS Development Kit) is the latest and greatest development platform that sports quad-core ARC HS38 in real silicon. Most noticeable features of the board are: * Quad-core ARC HS38 CPU running at 1GHz * 4Gb of DDR * Built-in Vivante GPU * Built-in Wi-Fi/Bluetooth module Peripherals: * [micro] SD-card slot * 2 USB 2.0 ports * 1Gbit Ethernet port * Built-in Digilent JTAG probe * Serial port accessible via micro-USB port New feature: SPEC-2346 Change-Id: I8772ee51cc3db9f6549da2d6a5ea2d116586cde6 Signed-off-by: Evgeniy Didin <didin@synopsys.com>
2019-04-23Fix imx6qdlsabreauto machine configurationBechir Mghirbi4-6/+4
The imx6qsabreauto target was falling behind and could not be build for GG-7.0. The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro. However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets. This patch makes the required changes to fix the imx6qsabreauto machine configuration: - removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro - updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer - deletes reference to packagegroup-fscl-* not required to build AGL - add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon' v2 (jsmoeller): moved board name to match MACHINE v3 (bechir.mghirbi): - remove wayland_2.0.0 as weston_4.0.0.imx is used. - use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - Add CFG80211 Kernel configuration Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-16Add machine templates for qemuarm and qemuarm64Jan-Simon Möller2-0/+6
This changeset adds the necessary tepmlates to build the qemu targets for ARM 32bit and 64bit. The MACHINE names are 'qemuarm' and 'qemuarm64'. As the compiler flags for qemuarm in Yocto are using the equivalent of armv5te, we need to ship our own machine/qemuarm.conf with our default tuning for armv7-a (YP name armv7ve), and overrides to build a v7 kernel and use a v7 capable QEMU machine. For qemuarm64, some additional kernel configuration is enabled to allow building and loading of the MOST drivers. Bug-AGL: SPEC-756 Change-Id: I0a688a1d61a75f1287902fc2733a8a54b0485a34 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-07-29Fix old bbappend in meta-qcomJan-Simon Möller1-0/+1
meta-openembedded already moved to 3.16 and there is no update in meta-qcom, yet. Change-Id: Iefbdf9bef83c01e4e37895d445d538d9e4f79957 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>