aboutsummaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
diff options
context:
space:
mode:
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch')
-rw-r--r--meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch357
1 files changed, 225 insertions, 132 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
index b9bcc7e..20adbaf 100644
--- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
+++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
@@ -56,19 +56,19 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 40 +
.../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 ++++
.../boot/dts/renesas/r8a7796-salvator-x-view.dts | 318 ++++
- arch/arm64/boot/dts/renesas/r8a7797-eagle.dts | 561 +++++++
+ arch/arm64/boot/dts/renesas/r8a7797-eagle.dts | 560 +++++++
arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts | 578 +++++++
- arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts | 498 ++++++
+ arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts | 518 ++++++
arch/arm64/boot/dts/renesas/r8a7797-v3msk-view.dts | 298 ++++
- arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts | 313 ++++
- arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi | 518 ++++++
+ arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts | 314 ++++
+ arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi | 545 ++++++
arch/arm64/boot/dts/renesas/ulcb-kf-most.dtsi | 30 +
arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 46 +
- arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 1529 +++++++++++++++++
+ arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 1554 ++++++++++++++++++
arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 515 ++++++
arch/arm64/boot/dts/renesas/ulcb-vb.dtsi | 1726 ++++++++++++++++++++
- arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi | 557 +++++++
- 42 files changed, 17091 insertions(+)
+ arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi | 578 +++++++
+ 42 files changed, 17184 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/legacy/Makefile
create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts
create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts
@@ -10219,10 +10219,10 @@ index 0000000..cc6866c
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7797-eagle.dts b/arch/arm64/boot/dts/renesas/r8a7797-eagle.dts
new file mode 100644
-index 0000000..eef10af
+index 0000000..3fb3bf1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7797-eagle.dts
-@@ -0,0 +1,561 @@
+@@ -0,0 +1,560 @@
+/*
+ * Device Tree Source for the Eagle board
+ *
@@ -10783,7 +10783,6 @@ index 0000000..eef10af
+ };
+ };
+};
-+
diff --git a/arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts
new file mode 100644
index 0000000..979cebe
@@ -11370,10 +11369,10 @@ index 0000000..979cebe
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts
new file mode 100644
-index 0000000..28a0b92
+index 0000000..4292b7b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts
-@@ -0,0 +1,498 @@
+@@ -0,0 +1,518 @@
+/*
+ * Device Tree Source for the V3MSK Videobox Mini board on r8a7797
+ *
@@ -11392,6 +11391,42 @@ index 0000000..28a0b92
+ aliases {
+ serial1 = &scif3;
+ };
++
++ pwr0: regulator-pwr0 {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR0";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_6c 8 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr1: regulator-pwr1 {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR1";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_6c 9 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr2: regulator-pwr2 {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR2";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_6c 10 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr3: regulator-pwr3 {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR3";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_6c 11 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
+};
+
+&canfd {
@@ -11447,7 +11482,7 @@ index 0000000..28a0b92
+ pinctrl-names = "default";
+ status = "okay";
+
-+ clock-frequency = <100000>;
++ clock-frequency = <400000>;
+
+ i2cswitch1: i2c-switch@74 {
+ compatible = "nxp,pca9548";
@@ -11554,6 +11589,10 @@ index 0000000..28a0b92
+ maxim,resetb-gpio = <1>;
+ maxim,fsync-mode = "automatic";
+ maxim,timeout = <100>;
++ POC0-supply = <&pwr0>;
++ POC1-supply = <&pwr1>;
++ POC2-supply = <&pwr2>;
++ POC3-supply = <&pwr3>;
+
+ port@0 {
+ max9286_des0ep0: endpoint@0 {
@@ -11593,6 +11632,10 @@ index 0000000..28a0b92
+ ti,lanes = <4>;
+ ti,forwarding-mode = "round-robin";
+ ti,cable-mode = "coax";
++ POC0-supply = <&pwr0>;
++ POC1-supply = <&pwr1>;
++ POC2-supply = <&pwr2>;
++ POC3-supply = <&pwr3>;
+
+ port@0 {
+ ti964_des0ep0: endpoint@0 {
@@ -11640,55 +11683,31 @@ index 0000000..28a0b92
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ input;
-+ line-name = "Video VIRQ";
++ line-name = "VIRQ";
+ };
+ des_cfg {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ input;
-+ line-name = "Video CNFG0";
++ line-name = "CNFG0";
+ };
+ pwr_shdn {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-high;
-+ line-name = "Video PWR_SHDN";
-+ };
-+ cam_pwr0 {
-+ gpio-hog;
-+ gpios = <8 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video PWR0";
-+ };
-+ cam_pwr1 {
-+ gpio-hog;
-+ gpios = <9 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video PWR1";
-+ };
-+ cam_pwr2 {
-+ gpio-hog;
-+ gpios = <10 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video PWR2";
-+ };
-+ cam_pwr3 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video PWR3";
++ line-name = "PWR_SHDN";
+ };
+ des_shdn {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
-+ line-name = "Video DES_SHDN";
++ line-name = "Des_SHDN";
+ };
+ fpdl_shdn {
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_HIGH>;
+ output-high;
-+ line-name = "Video FPDL_SHDN";
++ line-name = "FPDL_SHDN";
+ };
+ };
+ };
@@ -12178,10 +12197,10 @@ index 0000000..573e2bc
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts
new file mode 100644
-index 0000000..efb1576
+index 0000000..91d10c5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts
-@@ -0,0 +1,313 @@
+@@ -0,0 +1,314 @@
+/*
+ * Device Tree Source for the V3M Starter Kit board on r8a7797
+ *
@@ -12354,6 +12373,7 @@ index 0000000..efb1576
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7511_in>;
++// remote-endpoint = <&lvds_in>;
+ };
+ };
+ };
@@ -12497,10 +12517,10 @@ index 0000000..efb1576
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi
new file mode 100644
-index 0000000..4ca502f
+index 0000000..589a774
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi
-@@ -0,0 +1,518 @@
+@@ -0,0 +1,545 @@
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board:
+ * this adding conflicting resource on VIN4/VIN5/VIN6/VIN7 for CN11
@@ -12514,6 +12534,44 @@ index 0000000..4ca502f
+ * kind, whether express or implied.
+ */
+
++/ {
++ pwr0B: regulator-pwr0B {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR0B";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_b_5c 8 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr1B: regulator-pwr1B {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR1B";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_b_5c 9 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr2B: regulator-pwr2B {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR2B";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_b_5c 10 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr3B: regulator-pwr3B {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR3B";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_b_5c 11 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++};
++
+&i2cswitch4 {
+ i2c@2 {
+ #address-cells = <1>;
@@ -12618,6 +12676,10 @@ index 0000000..4ca502f
+ ti,lanes = <4>;
+ ti,forwarding-mode = "round-robin";
+ ti,cable-mode = "coax";
++ POC0-supply = <&pwr0B>;
++ POC1-supply = <&pwr1B>;
++ POC2-supply = <&pwr2B>;
++ POC3-supply = <&pwr3B>;
+
+ port@0 {
+ ti964_des1ep0: endpoint@0 {
@@ -12659,6 +12721,10 @@ index 0000000..4ca502f
+ ti,lanes = <4>;
+ ti,forwarding-mode = "round-robin";
+ ti,cable-mode = "coax";
++ POC0-supply = <&pwr0B>;
++ POC1-supply = <&pwr1B>;
++ POC2-supply = <&pwr2B>;
++ POC3-supply = <&pwr3B>;
+
+ port@0 {
+ ti954_des1ep0: endpoint@0 {
@@ -12690,6 +12756,10 @@ index 0000000..4ca502f
+ maxim,resetb-gpio = <1>;
+ maxim,fsync-mode = "automatic";
+ maxim,timeout = <100>;
++ POC0-supply = <&pwr0B>;
++ POC1-supply = <&pwr1B>;
++ POC2-supply = <&pwr2B>;
++ POC3-supply = <&pwr3B>;
+
+ port@0 {
+ max9286_des1ep0: endpoint@0 {
@@ -12728,7 +12798,8 @@ index 0000000..4ca502f
+ reg = <6>;
+ /* Slot B (CN11) */
+
-+ video_b_ext0: pca9535@27 {
++ /* PCA9535 is a redundand/deprecated card */
++ gpio_exp_b_27: gpio@27 {
+ compatible = "nxp,pca9535";
+ reg = <0x27>;
+ gpio-controller;
@@ -12790,7 +12861,7 @@ index 0000000..4ca502f
+ };
+ };
+
-+ video_b_ext1: max7325@5c {
++ gpio_exp_b_5c: gpio@5c {
+ compatible = "maxim,max7325";
+ reg = <0x5c>;
+ gpio-controller;
@@ -12820,30 +12891,6 @@ index 0000000..4ca502f
+ output-high;
+ line-name = "Video-B PWR_SHDN";
+ };
-+ video_b_cam_pwr0 {
-+ gpio-hog;
-+ gpios = <8 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR0";
-+ };
-+ video_b_cam_pwr1 {
-+ gpio-hog;
-+ gpios = <9 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR1";
-+ };
-+ video_b_cam_pwr2 {
-+ gpio-hog;
-+ gpios = <10 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR2";
-+ };
-+ video_b_cam_pwr3 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR3";
-+ };
+ video_b_des_shdn {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
@@ -13109,10 +13156,10 @@ index 0000000..b854216
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
new file mode 100644
-index 0000000..8ffafb2
+index 0000000..917dbab
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
-@@ -0,0 +1,1529 @@
+@@ -0,0 +1,1554 @@
+/*
+ * Device Tree Source for the ULCB Kingfisher board
+ *
@@ -13232,6 +13279,42 @@ index 0000000..8ffafb2
+ enable-active-high;
+ };
+
++ pwr0A: regulator-pwr0A {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR0A";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_a_5c 8 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr1A: regulator-pwr1A {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR1A";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_a_5c 9 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr2A: regulator-pwr2A {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR2A";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_a_5c 10 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr3A: regulator-pwr3A {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR3A";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_a_5c 11 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
+ kim {
+ compatible = "kim";
+ shutdown-gpios = <&gpio_ext_74 3 GPIO_ACTIVE_HIGH>;
@@ -13987,6 +14070,10 @@ index 0000000..8ffafb2
+ ti,lanes = <4>;
+ ti,forwarding-mode = "round-robin";
+ ti,cable-mode = "coax";
++ POC0-supply = <&pwr0A>;
++ POC1-supply = <&pwr1A>;
++ POC2-supply = <&pwr2A>;
++ POC3-supply = <&pwr3A>;
+
+ port@0 {
+ ti964_des0ep0: endpoint@0 {
@@ -14028,6 +14115,10 @@ index 0000000..8ffafb2
+ ti,lanes = <4>;
+ ti,forwarding-mode = "round-robin";
+ ti,cable-mode = "coax";
++ POC0-supply = <&pwr0A>;
++ POC1-supply = <&pwr1A>;
++ POC2-supply = <&pwr2A>;
++ POC3-supply = <&pwr3A>;
+
+ port@0 {
+ ti954_des0ep0: endpoint@0 {
@@ -14059,6 +14150,10 @@ index 0000000..8ffafb2
+ maxim,resetb-gpio = <1>;
+ maxim,fsync-mode = "automatic";
+ maxim,timeout = <100>;
++ POC0-supply = <&pwr0A>;
++ POC1-supply = <&pwr1A>;
++ POC2-supply = <&pwr2A>;
++ POC3-supply = <&pwr3A>;
+
+ port@0 {
+ max9286_des0ep0: endpoint@0 {
@@ -14142,7 +14237,8 @@ index 0000000..8ffafb2
+ reg = <7>;
+ /* Slot A (CN10) */
+
-+ video_a_ext0: pca9535@26 {
++ /* PCA9535 is a redundant/deprecated card */
++ gpio_exp_a_26: gpio@26 {
+ compatible = "nxp,pca9535";
+ reg = <0x26>;
+ gpio-controller;
@@ -14204,7 +14300,7 @@ index 0000000..8ffafb2
+ };
+ };
+
-+ video_a_ext1: max7325@5c {
++ gpio_exp_a_5c: gpio@5c {
+ compatible = "maxim,max7325";
+ reg = <0x5c>;
+ gpio-controller;
@@ -14234,30 +14330,6 @@ index 0000000..8ffafb2
+ output-high;
+ line-name = "Video-A PWR_SHDN";
+ };
-+ video_a_cam_pwr0 {
-+ gpio-hog;
-+ gpios = <8 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR0";
-+ };
-+ video_a_cam_pwr1 {
-+ gpio-hog;
-+ gpios = <9 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR1";
-+ };
-+ video_a_cam_pwr2 {
-+ gpio-hog;
-+ gpios = <10 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR2";
-+ };
-+ video_a_cam_pwr3 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR3";
-+ };
+ video_a_des_shdn {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
@@ -16897,10 +16969,10 @@ index 0000000..193153e
+//#include "ulcb-vb-cn12.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi
new file mode 100644
-index 0000000..3d4bcde
+index 0000000..beb52e9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi
-@@ -0,0 +1,557 @@
+@@ -0,0 +1,578 @@
+/*
+ * Device Tree Source for the ULCB Videobox Mini board
+ *
@@ -16916,6 +16988,42 @@ index 0000000..3d4bcde
+ serial1 = &scif1;
+ };
+
++ pwr0: regulator-pwr0 {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR0";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_6c 8 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr1: regulator-pwr1 {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR1";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_6c 9 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr2: regulator-pwr2 {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR2";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_6c 10 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ pwr3: regulator-pwr3 {
++ compatible = "regulator-fixed";
++ regulator-name = "PWR3";
++ regulator-min-microvolt = <9000000>;
++ regulator-max-microvolt = <9000000>;
++ gpio = <&gpio_exp_6c 11 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
+ lvds-encoder {
+ compatible = "thine,thc63lvdm83d";
+
@@ -17030,7 +17138,7 @@ index 0000000..3d4bcde
+ pinctrl-names = "default";
+ status = "okay";
+
-+ clock-frequency = <100000>;
++ clock-frequency = <400000>;
+
+ i2cswitch1: i2c-switch@74 {
+ compatible = "nxp,pca9548";
@@ -17137,6 +17245,10 @@ index 0000000..3d4bcde
+ maxim,resetb-gpio = <1>;
+ maxim,fsync-mode = "automatic";
+ maxim,timeout = <100>;
++ POC0-supply = <&pwr0>;
++ POC1-supply = <&pwr1>;
++ POC2-supply = <&pwr2>;
++ POC3-supply = <&pwr3>;
+
+ port@0 {
+ max9286_des0ep0: endpoint@0 {
@@ -17176,6 +17288,10 @@ index 0000000..3d4bcde
+ ti,lanes = <4>;
+ ti,forwarding-mode = "round-robin";
+ ti,cable-mode = "coax";
++ POC0-supply = <&pwr0>;
++ POC1-supply = <&pwr1>;
++ POC2-supply = <&pwr2>;
++ POC3-supply = <&pwr3>;
+
+ port@0 {
+ ti964_des0ep0: endpoint@0 {
@@ -17223,55 +17339,31 @@ index 0000000..3d4bcde
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ input;
-+ line-name = "Video VIRQ";
++ line-name = "VIRQ";
+ };
+ des_cfg {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ input;
-+ line-name = "Video CNFG0";
++ line-name = "CNFG0";
+ };
+ pwr_shdn {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>;
+ output-high;
-+ line-name = "Video PWR_SHDN";
-+ };
-+ cam_pwr0 {
-+ gpio-hog;
-+ gpios = <8 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video PWR0";
-+ };
-+ cam_pwr1 {
-+ gpio-hog;
-+ gpios = <9 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video PWR1";
-+ };
-+ cam_pwr2 {
-+ gpio-hog;
-+ gpios = <10 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video PWR2";
-+ };
-+ cam_pwr3 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video PWR3";
++ line-name = "PWR_SHDN";
+ };
+ des_shdn {
+ gpio-hog;
+ gpios = <13 GPIO_ACTIVE_HIGH>;
+ output-high;
-+ line-name = "Video DES_SHDN";
++ line-name = "Des_SHDN";
+ };
+ fpdl_shdn {
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_HIGH>;
+ output-high;
-+ line-name = "Video FPDL_SHDN";
++ line-name = "FPDL_SHDN";
+ };
+ };
+ };
@@ -17458,6 +17550,7 @@ index 0000000..3d4bcde
+ };
+ };
+};
++
--
1.9.1