aboutsummaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
diff options
context:
space:
mode:
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch')
-rw-r--r--meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch13640
1 files changed, 13640 insertions, 0 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
new file mode 100644
index 0000000..6d7bb3b
--- /dev/null
+++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
@@ -0,0 +1,13640 @@
+From 51718d8f768ba719a8a295e013e3456e13b70a98 Mon Sep 17 00:00:00 2001
+From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+Date: Fri, 14 Jul 2017 15:05:42 +0300
+Subject: [PATCH] arm64: dts: renesas: add ADAS boards
+
+Salvator-X.View board on R8A7795 ES1.x SoC
+Salvator-X.View board on R8A7795 SoC
+Salvator-X.View board on R8A7796 SoC
+H3ULCB.View board on R8A7795 ES1.x SoC
+H3ULCB.View board on R8A7795 SoC
+M3ULCB.View board on R8A7796 SoC
+H3ULCB.HAD board on R8A7795 ES1.x SoC
+H3ULCB.HAD board on R8A7795 SoC
+Kingfisher board on R8A7795 ES1.x SoC
+Kingfisher board on R8A7795 SoC
+Kingfisher board on R8A7796 SoC
+Videobox board on R8A7795 ES1.x SoC
+Videobox board on R8A7795 SoC
+
+Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+---
+ arch/arm64/boot/dts/renesas/Makefile | 14 +
+ .../dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts | 22 +
+ .../dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts | 23 +
+ .../boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi | 225 +++
+ .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts | 443 +++++
+ .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1655 ++++++++++++++++++
+ .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts | 1787 ++++++++++++++++++++
+ .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 ++++++
+ .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 552 ++++++
+ .../boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts | 22 +
+ .../boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts | 23 +
+ .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 219 +++
+ .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 443 +++++
+ arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1651 ++++++++++++++++++
+ arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts | 1787 ++++++++++++++++++++
+ .../arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts | 546 ++++++
+ .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 552 ++++++
+ .../boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts | 443 +++++
+ arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1238 ++++++++++++++
+ .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 ++++
+ .../boot/dts/renesas/r8a7796-salvator-x-view.dts | 318 ++++
+ arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi | 75 +
+ arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 33 +
+ arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 515 ++++++
+ 24 files changed, 13419 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi
+ create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi
+ create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi
+
+diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
+index 32fb4d9..c9b3e96 100644
+--- a/arch/arm64/boot/dts/renesas/Makefile
++++ b/arch/arm64/boot/dts/renesas/Makefile
+@@ -4,5 +4,19 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
+ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
+ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
+
++# ADAS boards
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb
++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb
++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb
++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb.dtb r8a7795-es1-h3ulcb-vb.dtb
++
+ always := $(dtb-y)
+ clean-files := *.dtb
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts
+new file mode 100644
+index 0000000..6b13f07
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts
+@@ -0,0 +1,22 @@
++/*
++ * Device Tree Source for the H3ULCB.HAD board Alfa side on r8a7795 ES1.x
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-es1-h3ulcb-had.dtsi"
++
++/ {
++ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795";
++};
++
++&pciec0 {
++ status = "okay";
++
++ /* Root complex */
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts
+new file mode 100644
+index 0000000..2f8b274
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts
+@@ -0,0 +1,23 @@
++/*
++ * Device Tree Source for the H3ULCB.HAD board Beta side on r8a7795 ES1.x
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-es1-h3ulcb-had.dtsi"
++
++/ {
++ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795";
++};
++
++&pciec0 {
++ status = "okay";
++
++ /* Endpoint */
++ endpoint;
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi
+new file mode 100644
+index 0000000..d50ff7a
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi
+@@ -0,0 +1,225 @@
++/*
++ * Device Tree Source for the H3ULCB.HAD board on r8a7795 ES1.x
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++/*
++ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides)
++ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0)
++ */
++
++#include "r8a7795-es1-h3ulcb-view.dts"
++
++/ {
++ model = "Renesas H3ULCB.HAD board based on r8a7795";
++
++ aliases {
++ serial1 = &scif1;
++ spi1 = &spi0_gpio;
++ spi2 = &spi1_gpio;
++ };
++
++ chosen {
++ stdout-path = "serial1:115200n8";
++ };
++
++ spi0_gpio: spi_gpio@0 {
++ compatible = "spi-gpio";
++ num-chipselects = <1>;
++ gpio-sck = <&gpio5 17 0>;
++ gpio-mosi = <&gpio5 20 0>;
++ gpio-miso = <&gpio5 22 0>;
++ cs-gpios = <&gpio5 19 0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ spidev@0 {
++ compatible = "spi-gpio";
++ reg = <0>;
++ spi-max-frequency = <2000000>;
++ spi-cpha;
++ spi-cpol;
++ };
++ };
++
++ spi1_gpio: spi_gpio@1 {
++ compatible = "spi-gpio";
++ num-chipselects = <1>;
++ gpio-sck = <&gpio6 8 0>;
++ gpio-mosi = <&gpio6 7 0>;
++ gpio-miso = <&gpio6 10 0>;
++ cs-gpios = <&gpio6 5 0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ spidev@0 {
++ compatible = "spi-gpio";
++ reg = <0>;
++ spi-max-frequency = <2000000>;
++ spi-cpha;
++ spi-cpol;
++ };
++ };
++
++ hdmi1-out {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi1_con: endpoint {
++ remote-endpoint = <&rcar_dw_hdmi1_out>;
++ };
++ };
++ };
++};
++
++&du {
++ ports {
++ port@1 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi0_in>;
++ };
++ };
++ port@2 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi1_in>;
++ };
++ };
++ };
++};
++
++&hdmi1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ rcar_dw_hdmi1_in: endpoint {
++ remote-endpoint = <&du_out_hdmi1>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ rcar_dw_hdmi1_out: endpoint {
++ remote-endpoint = <&hdmi1_con>;
++ };
++ };
++ };
++};
++
++&pfc {
++ scif1_pins: scif1 {
++ groups = "scif1_data_a";
++ function = "scif1";
++ };
++
++ msiof0_pins: spi1 {
++ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd",
++ "msiof0_ss1";
++ function = "msiof0";
++ };
++
++ msiof1_pins: spi2 {
++ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a",
++ "msiof1_ss1_a";
++ function = "msiof1";
++ };
++
++ sound_clk_pins: sound-clk {
++ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
++ "audio_clkout_a" /*, "audio_clkout3_a"*/;
++ function = "audio_clk";
++ };
++
++ usb31_pins: usb31 {
++ groups = "usb31";
++ function = "usb31";
++ };
++
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ canfd0_pins: canfd0 {
++ groups = "canfd0_data_a";
++ function = "canfd0";
++ };
++};
++
++&scif1 {
++ pinctrl-0 = <&scif1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&avb {
++ /delete-property/phy-handle;
++ /delete-property/phy-gpios;
++ /delete-node/ethernet-phy@0;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++};
++
++&msiof0 {
++ pinctrl-0 = <&msiof0_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++ cs-gpios = <&gpio5 19 0>;
++
++ spidev@0 {
++ compatible = "renesas,sh-msiof";
++ reg = <0>;
++ spi-max-frequency = <66666666>;
++ spi-cpha;
++ spi-cpol;
++ };
++};
++
++&msiof1 {
++ status = "disabled";
++ cs-gpios = <&gpio6 5 0>;
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++
++ renesas,can-clock-select = <0x0>;
++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */
++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */
++ >;
++};
++
++&canfd {
++ pinctrl-0 = <&canfd0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */
++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */
++ >;
++
++ channel0 {
++ status = "okay";
++ };
++};
++
++&xhci1 {
++ status = "okay";
++ pinctrl-0 = <&usb31_pins>;
++ pinctrl-names = "default";
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts
+new file mode 100644
+index 0000000..d245bbe
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts
+@@ -0,0 +1,443 @@
++/*
++ * Device Tree Source for the H3ULCB Kingfisher V1 board on r8a7795 ES1.x
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-es1-h3ulcb-kf.dts"
++
++/ {
++ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795";
++
++ aliases {
++ serial1 = &hscif0;
++ serial2 = &hscif1;
++ serial3 = &scif1;
++ };
++
++ wlan_en: regulator@4 {
++ compatible = "regulator-fixed";
++ regulator-name = "wlan-en-regulator";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ codec_en_reg: regulator@6 {
++ compatible = "regulator-fixed";
++ regulator-name = "codec-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 15 0>;
++
++ /* delay - CHECK */
++ startup-delay-us = <70000>;
++ enable-active-high;
++ };
++
++ amp_en_reg: regulator@7 {
++ compatible = "regulator-fixed";
++ regulator-name = "amp-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 0 0>;
++
++ startup-delay-us = <0>;
++ enable-active-high;
++ };
++
++ /delete-node/regulator@8;
++
++ sdio_switch: regulator@9 {
++ compatible = "regulator-fixed";
++ regulator-name = "wifi_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_74 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ /delete-node/regulator@10;
++
++ radio_switch: regulator@11 {
++ compatible = "regulator-fixed";
++ regulator-name = "radio_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ kim {
++ compatible = "kim";
++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */
++ /* serial1 */
++ dev_name = "/dev/ttySC1";
++ flow_cntrl = <1>;
++ /* int div 8 hscif@26.6666656MHz */
++ baud_rate = <3333332>;
++ };
++
++ hdmi-out {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con: endpoint {
++ remote-endpoint = <&adv7513_out>;
++ };
++ };
++ };
++};
++
++&pfc {
++ /delete-node/hscif4;
++
++ scif1_pins: scif1 {
++ groups = "scif1_data_b";
++ function = "scif1";
++ };
++
++ hscif0_pins: hscif0 {
++ groups = "hscif0_data", "hscif0_ctrl";
++ function = "hscif0";
++ };
++
++ hscif1_pins: hscif1 {
++ groups = "hscif1_data_a", "hscif1_ctrl_a";
++ function = "hscif1";
++ };
++
++ du_pins: du {
++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp";
++ function = "du";
++ };
++};
++
++&du {
++ pinctrl-0 = <&du_pins>;
++ pinctrl-names = "default";
++
++ ports {
++ port@0 {
++ endpoint {
++ remote-endpoint = <&adv7513_in>;
++ };
++ };
++ port@1 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi0_in>;
++ };
++ };
++ };
++};
++
++&gpio0 {
++ /delete-node/video_a_irq;
++ /delete-node/video_b_irq;
++ /delete-node/gpioext_2_20_irq;
++};
++
++&gpio1 {
++ /delete-node/gpioext_2_21_irq;
++ /delete-node/wifi_irq;
++};
++
++&gpio2 {
++ bl_pwm {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "BL PWM 100%";
++ };
++};
++
++&gpio5 {
++ /delete-node/touch_irq;
++ /delete-node/bt_strap;
++
++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */
++ /* Ignore these pins */
++ hscif0_cts {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "hscif0 CTS";
++ };
++
++ hscif0_rts {
++ gpio-hog;
++ gpios = <16 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "hscif0 RTS";
++ };
++};
++
++&gpio7 {
++ /delete-node/gpioext_2_21_irq;
++};
++
++&scif1 {
++ pinctrl-0 = <&scif1_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hscif0 {
++ pinctrl-0 = <&hscif0_pins>;
++ pinctrl-names = "default";
++ ctsrts;
++
++ status = "okay";
++};
++
++&hscif1 {
++ pinctrl-0 = <&hscif1_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hscif4 {
++ /delete-property/pinctrl-0;
++ /delete-property/pinctrl-names;
++
++ status = "disabled";
++};
++
++&i2c2 {
++ /delete-node/pca9535@20;
++ /delete-node/pca9535@21;
++
++ gpio_ext_74: pca9539@74 {
++ compatible = "nxp,pca9539";
++ reg = <0x74>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio6>;
++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
++
++ hub_pwen {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "HUB pwen";
++ };
++ hub_rst {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "HUB rst";
++ };
++ otg_offvbus {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "OTG off VBUSn";
++ };
++ otg_extlpn {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "OTG EXTLPn";
++ };
++ otg_stat1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "OTG Stat1";
++ };
++ otg_stat2 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "OTG Stat2";
++ };
++ };
++
++ gpio_ext_75: pca9539@75 {
++ compatible = "nxp,pca9539";
++ reg = <0x75>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio6>;
++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
++
++ gps_rst {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "GPS rst";
++ };
++ fpdl_shdn {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "FPDLink shdn";
++ };
++ };
++};
++
++&i2cswitch2 {
++ reg = <0x71>;
++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>;
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++
++ hdmi@3d {
++ compatible = "adi,adv7511w";
++ reg = <0x3d>;
++ interrupt-parent = <&gpio2>;
++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>;
++
++ adi,input-depth = <8>;
++ adi,input-colorspace = "rgb";
++ adi,input-clock = "1x";
++ adi,input-style = <1>;
++ adi,input-justification = "evenly";
++ adi,clock-delay = <1200>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ adv7513_in: endpoint {
++ remote-endpoint = <&du_out_rgb>;
++ };
++ };
++
++ port@1 {
++ reg = <1>;
++ adv7513_out: endpoint {
++ remote-endpoint = <&hdmi_con>;
++ };
++ };
++ };
++ };
++ };
++};
++
++&i2c4 {
++ /delete-node/pca9535@21;
++
++ gpio_ext_76: pca9539@76 {
++ compatible = "nxp,pca9539";
++ reg = <0x76>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio7>;
++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
++
++ port_b_a0 {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B A0";
++ };
++ port_b_a1 {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B A1";
++ };
++ port_a_a0 {
++ gpio-hog;
++ gpios = <2 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A A0";
++ };
++ port_a_a1 {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A A1";
++ };
++ /* pin 12 - CAM_CLK */
++ rpi_cam_io_1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO1";
++ };
++ /* pin 11 - CAM_GPIO - assume pwdn */
++ rpi_cam_io_0 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO0";
++ };
++ /* 0 - FPDLink output, 1 - LVDS output */
++ lvds_vs_fpdl {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "LVDS switch";
++ };
++ };
++
++ gpio_ext_77: pca9539@77 {
++ compatible = "nxp,pca9539";
++ reg = <0x77>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio5>;
++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
++
++ mpcie_wake {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "mPCIe WAKE#";
++ };
++ mpcie_wdisable {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "mPCIe W_DISABLE";
++ };
++ mpcie_clreq {
++ gpio-hog;
++ gpios = <2 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe CLKREQ#";
++ };
++ mpcie_ovc {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe OVC";
++ };
++ };
++};
++
++&i2cswitch4 {
++ reg = <0x71>;
++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
++};
++
++&wlcore {
++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
+new file mode 100644
+index 0000000..075bf2c
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
+@@ -0,0 +1,1655 @@
++/*
++ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ES1.x
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-es1-h3ulcb.dts"
++
++/ {
++ model = "Renesas H3ULCB Kingfisher board based on r8a7795";
++
++ aliases {
++ serial1 = &hscif4;
++ };
++
++ snd_clk: snd_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <24576000>;
++ clock-output-names = "scki";
++ };
++
++ wlan_en: regulator@4 {
++ compatible = "regulator-fixed";
++ regulator-name = "wlan-en-regulator";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ vcc_sdhi3: regulator@41 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 Vcc";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vccq_sdhi3: regulator@5 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 VccQ";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ codec_en_reg: regulator@6 {
++ compatible = "regulator-fixed";
++ regulator-name = "codec-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 15 0>;
++
++ /* delay - CHECK */
++ startup-delay-us = <70000>;
++ enable-active-high;
++ };
++
++ amp_en_reg: regulator@7 {
++ compatible = "regulator-fixed";
++ regulator-name = "amp-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 0 0>;
++
++ startup-delay-us = <0>;
++ enable-active-high;
++ };
++
++ lvds_switch: regulator@8 {
++ compatible = "regulator-fixed";
++ regulator-name = "lvds_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio1 24 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ sdio_switch: regulator@9 {
++ compatible = "regulator-fixed";
++ regulator-name = "wifi_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_20 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ sound_switch: regulator@10 {
++ compatible = "regulator-fixed";
++ regulator-name = "pcm3168a_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_21 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ radio_switch: regulator@11 {
++ compatible = "regulator-fixed";
++ regulator-name = "radio_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ kim {
++ compatible = "kim";
++ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */
++ /* serial1 */
++ dev_name = "/dev/ttySC1";
++ flow_cntrl = <1>;
++ /* int div 8 hscif@26.6666656MHz */
++ baud_rate = <3333332>;
++ };
++
++ btwilink {
++ compatible = "btwilink";
++ };
++
++ sound_ext: sound@0 {
++ pinctrl-0 = <&sound_0_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "left_j";
++ simple-audio-card,name = "pcm3168a";
++
++ simple-audio-card,bitclock-master = <&sound_ext_master>;
++ simple-audio-card,frame-master = <&sound_ext_master>;
++ sound_ext_master: simple-audio-card,cpu@0 {
++ sound-dai = <&rcar_sound 0>;
++ dai-tdm-slot-num = <8>;
++ dai-tdm-slot-width = <32>;
++ };
++
++ simple-audio-card,codec@0 {
++ sound-dai = <&pcm3168a>;
++ dai-tdm-slot-num = <8>;
++ dai-tdm-slot-width = <32>;
++ system-clock-frequency = <24576000>;
++ };
++ };
++
++ /delete-node/sound;
++
++ rsnd_ak4613: sound@1 {
++ pinctrl-0 = <&sound_1_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "left_j";
++ simple-audio-card,name = "ak4613";
++
++ simple-audio-card,bitclock-master = <&sndcpu>;
++ simple-audio-card,frame-master = <&sndcpu>;
++
++ sndcpu: simple-audio-card,cpu@1 {
++ sound-dai = <&rcar_sound 1>;
++ };
++
++ sndcodec: simple-audio-card,codec@1 {
++ sound-dai = <&ak4613>;
++ };
++ };
++
++ sound_radio: sound@2 {
++ pinctrl-0 = <&sound_2_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "i2s";
++ simple-audio-card,name = "radio";
++
++ simple-audio-card,bitclock-master = <&sound_radio_master>;
++ simple-audio-card,frame-master = <&sound_radio_master>;
++ simple-audio-card,cpu@2 {
++ sound-dai = <&rcar_sound 2>;
++ };
++
++ sound_radio_master: simple-audio-card,codec@2 {
++ sound-dai = <&radio>;
++ system-clock-frequency = <12288000>;
++ };
++ };
++
++ lvds-encoder {
++ compatible = "thine,thc63lvdm83d";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ lvds_enc_in: endpoint {
++ remote-endpoint = <&du_out_lvds0>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ lvds_enc_out: endpoint {
++ remote-endpoint = <&lvds_in>;
++ };
++ };
++ };
++ };
++
++ lvds {
++ compatible = "lvds-connector";
++
++ width-mm = <210>;
++ height-mm = <158>;
++
++ panel-timing {
++ /* 1280x800 @60Hz */
++ clock-frequency = <65000000>;
++ hactive = <1280>;
++ vactive = <800>;
++ hsync-len = <40>;
++ hfront-porch = <80>;
++ hback-porch = <40>;
++ vfront-porch = <14>;
++ vback-porch = <14>;
++ vsync-len = <4>;
++ };
++
++ port {
++ lvds_in: endpoint {
++ remote-endpoint = <&lvds_enc_out>;
++ };
++ };
++ };
++
++ radio: si468x@0 {
++ compatible = "si,si468x-pcm";
++ status = "okay";
++
++ #sound-dai-cells = <0>;
++ };
++};
++
++&pfc {
++ hscif4_pins: hscif4 {
++ groups = "hscif4_data_a", "hscif4_ctrl";
++ function = "hscif4";
++ };
++
++ sdhi3_pins_3v3: sd3_3v3 {
++ groups = "sdhi3_data4", "sdhi3_ctrl";
++ function = "sdhi3";
++ power-source = <3300>;
++ };
++
++ sound_0_pins: sound0 {
++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data";
++ function = "ssi";
++ };
++
++ sound_1_pins: sound1 {
++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
++ function = "ssi";
++ };
++
++ sound_2_pins: sound2 {
++ groups = "ssi6_ctrl", "ssi6_data";
++ function = "ssi";
++ };
++
++ usb0_pins: usb0 {
++ groups = "usb0";
++ function = "usb0";
++ };
++
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ can1_pins: can1 {
++ groups = "can1_data";
++ function = "can1";
++ };
++
++ canfd0_pins: canfd0 {
++ groups = "canfd0_data_a";
++ function = "canfd0";
++ };
++
++ canfd1_pins: canfd1 {
++ groups = "canfd1_data";
++ function = "canfd1";
++ };
++};
++
++&gpio0 {
++ video_a_irq {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A irq";
++ };
++
++ video_b_irq {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B irq";
++ };
++
++ gpioext_2_20_irq {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x20@i2c2 irq";
++ };
++};
++
++&gpio1 {
++ gpioext_2_21_irq {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x21@i2c2 irq";
++ };
++
++ wifi_irq {
++ gpio-hog;
++ gpios = <25 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "wifi irq";
++ };
++};
++
++&gpio5 {
++ touch_irq {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "touch irq";
++ };
++
++ /* From TI forum */
++ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */
++ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */
++ bt_strap {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "BT strap pin";
++ };
++};
++
++&gpio7 {
++ gpioext_2_21_irq {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x21@i2c4 irq";
++ };
++};
++
++&hscif4 {
++ pinctrl-0 = <&hscif4_pins>;
++ pinctrl-names = "default";
++ ctsrts;
++
++ status = "okay";
++};
++
++&i2c2 {
++ clock-frequency = <400000>;
++
++ gpio_ext_20: pca9535@20 {
++ compatible = "nxp,pca9535";
++ reg = <0x20>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio0>;
++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
++ };
++
++ gpio_ext_21: pca9535@21 {
++ compatible = "nxp,pca9535";
++ reg = <0x21>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio1>;
++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
++ };
++
++ i2cswitch2: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* BCM node(s) */
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* USB3.0 HUB node(s) */
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* Power amp node(s) */
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* Radio node(s) */
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++ /* A2B node(s) */
++ };
++
++ i2c@5 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <5>;
++ /* PCIe node(s) */
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* LVDS display node(s) */
++
++ polytouch: edt-ft5x06@38 {
++ compatible = "edt,edt-ft5x06";
++ reg = <0x38>;
++ interrupt-parent = <&gpio5>;
++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
++ };
++ };
++
++ i2c@7 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <7>;
++ /* Audio, GPS and Gyro node(s) */
++
++ pcm3168a: audio-codec@44 {
++ #sound-dai-cells = <0>;
++ compatible = "ti,pcm3168a";
++ reg = <0x44>;
++ clocks = <&snd_clk>;
++ clock-names = "scki";
++ tdm;
++ VDD1-supply = <&codec_en_reg>;
++ VDD2-supply = <&codec_en_reg>;
++ VCCAD1-supply = <&codec_en_reg>;
++ VCCAD2-supply = <&codec_en_reg>;
++ VCCDA1-supply = <&amp_en_reg>;
++ VCCDA2-supply = <&amp_en_reg>;
++ };
++
++ lsm9ds0_acc_mag@1d {
++ compatible = "st,lsm9ds0_acc_mag";
++ reg = <0x1d>;
++ };
++
++ lsm9ds0_gyr@6b {
++ compatible = "st,lsm9ds0-gyro";
++ reg = <0x6b>;
++ };
++
++ /* GPS@ 0x42 */
++ };
++ };
++};
++
++&i2c4 {
++ gpio_ext_22: pca9535@21 {
++ compatible = "nxp,pca9535";
++ reg = <0x22>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio7>;
++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
++
++ /* pin 12 - CAM_CLK */
++ rpi_cam_io_1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO1";
++ };
++ /* pin 11 - CAM_GPIO - assume pwdn */
++ rpi_cam_io_0 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO0";
++ };
++ };
++
++ i2cswitch4: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* SAM node(s) */
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* Slot A (CN10) */
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ ov106xx_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ ov106xx_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ ov106xx_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ ov106xx_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ ov106xx_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ ov106xx_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@0 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti964_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti964_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ ti964_des0ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ ti964_des0ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ ti964_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@0 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti954_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti954_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ ti954_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2a */
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2a>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* Slot B (CN11) */
++
++ ov106xx@4 {
++ compatible = "ovti,ov106xx";
++ reg = <0x64>;
++
++ port@0 {
++ ov106xx_in4: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ ov106xx_ti964_des1ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep0>;
++ };
++ ov106xx_ti954_des1ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep0>;
++ };
++ };
++ };
++
++ ov106xx@5 {
++ compatible = "ovti,ov106xx";
++ reg = <0x65>;
++
++ port@0 {
++ ov106xx_in5: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ ov106xx_ti964_des1ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep1>;
++ };
++ ov106xx_ti954_des1ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep1>;
++ };
++ };
++ };
++
++ ov106xx@6 {
++ compatible = "ovti,ov106xx";
++ reg = <0x66>;
++
++ port@0 {
++ ov106xx_in6: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ ov106xx_ti964_des1ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep2>;
++ };
++ };
++ };
++
++ ov106xx@7 {
++ compatible = "ovti,ov106xx";
++ reg = <0x67>;
++
++ port@0 {
++ ov106xx_in7: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ ov106xx_ti964_des1ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@1 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti964_des1ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ ti964_des1ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ ti964_des1ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ ti964_des1ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ ti964_csi2ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@1 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti954_des1ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ ti954_des1ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ };
++ port@1 {
++ ti954_csi2ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2a */
++ max9286-max9271@1 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2a>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des1ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ max9286_des1ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ max9286_des1ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ max9286_des1ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ max9286_csi2ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* Slot B (CN11) */
++
++ video_b_ext0: pca9535@27 {
++ compatible = "nxp,pca9535";
++ reg = <0x27>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_b_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B cfg1";
++ };
++ video_b_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B cfg0";
++ };
++ video_b_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR_SHDN";
++ };
++ video_b_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR0";
++ };
++ video_b_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR1";
++ };
++ video_b_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR2";
++ };
++ video_b_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR3";
++ };
++ video_b_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B DES_SHDN";
++ };
++ video_b_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B led";
++ };
++ };
++
++ video_b_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_b_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B cfg2";
++ };
++ video_b_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B cfg1";
++ };
++ video_b_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B cfg0";
++ };
++ video_b_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR_SHDN";
++ };
++ video_b_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR0";
++ };
++ video_b_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR1";
++ };
++ video_b_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR3";
++ };
++ };
++ };
++
++ i2c@7 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <7>;
++ /* Slot A (CN10) */
++
++ video_a_ext0: pca9535@26 {
++ compatible = "nxp,pca9535";
++ reg = <0x26>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR2";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ video_a_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A DES_SHDN";
++ };
++ video_a_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A led";
++ };
++ };
++
++ video_a_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg2";
++ };
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ };
++ };
++ };
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec0 {
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ vin0_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ vin0_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ vin1_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ vin1_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ vin2_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ vin3_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi41";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ vin4_ti964_des1ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep0>;
++ };
++ vin4_ti954_des1ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ vin5_ti964_des1ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep1>;
++ };
++ vin5_ti954_des1ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in6>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ vin6_ti964_des1ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in7>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ vin7_ti964_des1ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep3>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_41 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_41_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&rcar_sound {
++ pinctrl-0 = <&sound_clk_pins>;
++
++ /* Multi DAI */
++ #sound-dai-cells = <1>;
++
++ rcar_sound,dai {
++ dai0 {
++ playback = <&ssi7>;
++ capture = <&ssi8>;
++ };
++
++ dai1 {
++ playback = <&ssi0 &src0 &dvc0>;
++ capture = <&ssi1 &src1 &dvc1>;
++ };
++
++ dai2 {
++ capture = <&ssi6>;
++ };
++ };
++};
++
++&sdhi3 {
++ pinctrl-0 = <&sdhi3_pins_3v3>;
++ pinctrl-names = "default";
++
++ vmmc-supply = <&wlan_en>;
++ vqmmc-supply = <&vccq_sdhi3>;
++ keep-power-in-suspend;
++ enable-sdio-wakeup;
++ bus-width = <4>;
++ no-1-8-v;
++ non-removable;
++ cap-power-off-card;
++ max-frequency = <26000000>;
++ status = "okay";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ wlcore: wlcore@2 {
++ compatible = "ti,wl1837";
++ reg = <2>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
++ };
++};
++
++&usb2_phy0 {
++ pinctrl-0 = <&usb0_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hsusb {
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&xhci0 {
++ status = "okay";
++};
++
++&msiof1 {
++ status = "disabled";
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&can1 {
++ pinctrl-0 = <&can1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&canfd {
++ pinctrl-0 = <&canfd0_pins &canfd1_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++
++ channel0 {
++ status = "okay";
++ };
++
++ channel1 {
++ status = "okay";
++ };
++};
++
++/* uncomment to enable CN48 on VIN4 */
++//#include "ulcb-kf-rpi.dtsi"
++/* uncomment to enable CN47: SD on SDHI3 */
++//#include "ulcb-kf-sd3.dtsi"
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts
+new file mode 100644
+index 0000000..0e6ea57
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts
+@@ -0,0 +1,1787 @@
++/*
++ * Device Tree Source for the H3ULCB Videobox board on r8a7795 ES1.x
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-es1-h3ulcb.dts"
++
++/ {
++ model = "Renesas H3ULCB Videobox board based on r8a7795";
++
++ leds {
++ compatible = "gpio-leds";
++
++ led5 {
++ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
++ };
++ led6 {
++ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
++ };
++ /* D13 - status 0 */
++ led_ext00 {
++ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "heartbeat";
++ };
++ /* D14 - status 1 */
++ led_ext01 {
++ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "mmc1";
++ };
++ /* D16 - HDMI1 */
++ led_ext02 {
++ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>;
++ };
++ /* D18 - HDMI0 */
++ led_ext03 {
++ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>;
++ };
++ /* D20 - USB3.0 - 0.1 */
++ led_ext04 {
++ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>;
++ };
++ /* D21 - USB3.0 - 0.2 */
++ led_ext05 {
++ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>;
++ };
++ /* D24 - USB3.0 - 1.1 */
++ led6_ext06 {
++ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>;
++ };
++ /* D25 - USB3.0 - 1.2 */
++ led_ext07 {
++ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ snd_clk: snd_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <24576000>;
++ clock-output-names = "scki";
++ };
++
++ vccq_sdhi3: regulator@5 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 VccQ";
++ /* external voltage translator to 1.8V */
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ fpdlink_switch: regulator@8 {
++ compatible = "regulator-fixed";
++ regulator-name = "fpdlink_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio1 20 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ hub_reset: regulator@9 {
++ compatible = "regulator-fixed";
++ regulator-name = "hub_reset";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio5 5 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ hub_power: regulator@10 {
++ compatible = "regulator-fixed";
++ regulator-name = "hub_power";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio6 28 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ /delete-node/sound;
++
++ rsnd_ak4613: sound@0 {
++ pinctrl-0 = <&sound_0_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "left_j";
++ simple-audio-card,name = "ak4613";
++
++ simple-audio-card,bitclock-master = <&sndcpu>;
++ simple-audio-card,frame-master = <&sndcpu>;
++
++ sndcpu: simple-audio-card,cpu@1 {
++ sound-dai = <&rcar_sound>;
++ };
++
++ sndcodec: simple-audio-card,codec@1 {
++ sound-dai = <&ak4613>;
++ };
++ };
++
++ lvds-encoder {
++ compatible = "thine,thc63lvdm83d";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ lvds_enc_in: endpoint {
++ remote-endpoint = <&du_out_lvds0>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ lvds_enc_out: endpoint {
++ remote-endpoint = <&lvds_in>;
++ };
++ };
++ };
++ };
++
++ lvds {
++ compatible = "lvds-connector";
++
++ width-mm = <210>;
++ height-mm = <158>;
++
++ panel-timing {
++ /* 1280x800 @60Hz */
++ clock-frequency = <65000000>;
++ hactive = <1280>;
++ vactive = <800>;
++ hsync-len = <40>;
++ hfront-porch = <80>;
++ hback-porch = <40>;
++ vfront-porch = <14>;
++ vback-porch = <14>;
++ vsync-len = <4>;
++ };
++
++ port {
++ lvds_in: endpoint {
++ remote-endpoint = <&lvds_enc_out>;
++ };
++ };
++ };
++
++ hdmi1-out {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi1_con: endpoint {
++ remote-endpoint = <&rcar_dw_hdmi1_out>;
++ };
++ };
++ };
++
++ excan_ref_clk: excan-ref-clock {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <16000000>;
++ };
++
++ radio: si468x@0 {
++ compatible = "si,si468x-pcm";
++ status = "okay";
++
++ #sound-dai-cells = <0>;
++ };
++
++ spi_gpio_sw {
++ compatible = "spi-gpio";
++ #address-cells = <0x1>;
++ #size-cells = <0x0>;
++ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>;
++ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>;
++ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>;
++ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
++ num-chipselects = <1>;
++
++ spidev: spidev@0 {
++ compatible = "spidev", "spi-gpio";
++ reg = <0>;
++ spi-max-frequency = <25000000>;
++ spi-cpha;
++ spi-cpol;
++ };
++ };
++
++ spi_gpio_can {
++ compatible = "spi-gpio";
++ #address-cells = <0x1>;
++ #size-cells = <0x0>;
++ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>;
++ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>;
++ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>;
++ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
++ &gpio1 4 GPIO_ACTIVE_HIGH>;
++ num-chipselects = <2>;
++
++ spican0: spidev@0 {
++ compatible = "microchip,mcp2515";
++ reg = <0>;
++ clocks = <&excan_ref_clk>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <15 GPIO_ACTIVE_LOW>;
++ spi-max-frequency = <10000000>;
++ };
++ spican1: spidev@1 {
++ compatible = "microchip,mcp2515";
++ reg = <1>;
++ clocks = <&excan_ref_clk>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <5 GPIO_ACTIVE_LOW>;
++ spi-max-frequency = <10000000>;
++ };
++ };
++};
++
++&du {
++ ports {
++ port@1 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi0_in>;
++ };
++ };
++ port@2 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi1_in>;
++ };
++ };
++ port@3 {
++ endpoint {
++ remote-endpoint = <&lvds_enc_in>;
++ };
++ };
++ };
++};
++
++&hdmi1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ rcar_dw_hdmi1_in: endpoint {
++ remote-endpoint = <&du_out_hdmi1>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ rcar_dw_hdmi1_out: endpoint {
++ remote-endpoint = <&hdmi1_con>;
++ };
++ };
++ };
++};
++
++&pfc {
++ hscif4_pins: hscif4 {
++ groups = "hscif4_data_a", "hscif4_ctrl";
++ function = "hscif4";
++ };
++
++ sdhi3_pins_3v3: sd3_3v3 {
++ groups = "sdhi3_data4", "sdhi3_ctrl";
++ function = "sdhi3";
++ power-source = <3300>;
++ };
++
++ /delete-node/sound;
++
++ sound_0_pins: sound1 {
++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
++ function = "ssi";
++ };
++
++ usb0_pins: usb0 {
++ groups = "usb0";
++ function = "usb0";
++ };
++
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ can1_pins: can1 {
++ groups = "can1_data";
++ function = "can1";
++ };
++
++ canfd0_pins: canfd0 {
++ groups = "canfd0_data_a";
++ function = "canfd0";
++ };
++
++ canfd1_pins: canfd1 {
++ groups = "canfd1_data";
++ function = "canfd1";
++ };
++};
++
++&gpio0 {
++ video_a_irq {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A irq";
++ };
++
++ video_b_irq {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B irq";
++ };
++
++ video_c_irq {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-C irq";
++ };
++};
++
++&gpio1 {
++ gpioext_4_22_irq {
++ gpio-hog;
++ gpios = <25 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x22@i2c4 irq";
++ };
++ pcie_disable {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "mPCIe W_DISABLE";
++ };
++ m2_sleep {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "M.2 SLEEP#";
++ };
++ m2_pres {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 Present";
++ };
++ m2_pcie_det {
++ gpio-hog;
++ gpios = <18 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 PCIe detected";
++ };
++ m2_usb_det {
++ gpio-hog;
++ gpios = <19 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 USB30 detected";
++ };
++ m2_usb_det {
++ gpio-hog;
++ gpios = <27 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 SSD detected";
++ };
++ eth_phy_reset {
++ gpio-hog;
++ gpios = <16 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "BR phy reset";
++ };
++ eth_sw_reset {
++ gpio-hog;
++ gpios = <17 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "BR switch reset";
++ };
++};
++
++&gpio2 {
++ m2_wake {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 WAKE#";
++ };
++ m2_pcie_en {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "M.2 PCIe enable";
++ };
++};
++
++&gpio3 {
++ m2_power_off {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "M.2 FULL_CARD_POWER_OFF#";
++ };
++};
++
++&gpio6 {
++ pcie_wake {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe WAKE#";
++ };
++ pcie_clkreq {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe CLKREQ#";
++ };
++ m2_rst {
++ gpio-hog;
++ gpios = <21 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "M.2 RESET#";
++ };
++};
++
++&hscif4 {
++ pinctrl-0 = <&hscif4_pins>;
++ pinctrl-names = "default";
++ ctsrts;
++
++ status = "okay";
++};
++
++&i2c2 {
++ clock-frequency = <400000>;
++
++ i2cswitch2: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* USB3.0 HUB node(s) */
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* PCIe node(s) */
++ };
++
++ i2c@7 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <7>;
++ /* Slot A (CN10) */
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ ov106xx_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ ov106xx_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ ov106xx_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ ov106xx_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ ov106xx_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ ov106xx_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@0 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "stp";
++
++ port@0 {
++ ti964_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti964_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ ti964_des0ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ ti964_des0ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ ti964_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@0 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "stp";
++
++ port@0 {
++ ti954_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti954_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ ti954_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2c */
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2c>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* Slot B (CN11) */
++
++ ov106xx@4 {
++ compatible = "ovti,ov106xx";
++ reg = <0x64>;
++
++ port@0 {
++ ov106xx_in4: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ ov106xx_ti964_des1ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep0>;
++ };
++ ov106xx_ti954_des1ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep0>;
++ };
++ };
++ };
++
++ ov106xx@5 {
++ compatible = "ovti,ov106xx";
++ reg = <0x65>;
++
++ port@0 {
++ ov106xx_in5: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ ov106xx_ti964_des1ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep1>;
++ };
++ ov106xx_ti954_des1ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep1>;
++ };
++ };
++ };
++
++ ov106xx@6 {
++ compatible = "ovti,ov106xx";
++ reg = <0x66>;
++
++ port@0 {
++ ov106xx_in6: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ ov106xx_ti964_des1ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep2>;
++ };
++ };
++ };
++
++ ov106xx@7 {
++ compatible = "ovti,ov106xx";
++ reg = <0x67>;
++
++ port@0 {
++ ov106xx_in7: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ ov106xx_ti964_des1ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@1 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "stp";
++
++ port@0 {
++ ti964_des1ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ ti964_des1ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ ti964_des1ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ ti964_des1ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ ti964_csi2ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@1 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "stp";
++
++ port@0 {
++ ti954_des1ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ ti954_des1ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ };
++ port@1 {
++ ti954_csi2ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2c */
++ max9286-max9271@1 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2c>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des1ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ max9286_des1ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ max9286_des1ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ max9286_des1ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ max9286_csi2ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* Slot C (CN12) */
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* Slot A (CN10) */
++
++ video_a_ext0: pca9535@26 {
++ compatible = "nxp,pca9535";
++ reg = <0x26>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR2";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ video_a_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A DES_SHDN";
++ };
++ video_a_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A led";
++ };
++ };
++
++ video_a_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg2";
++ };
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr2 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR2";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ video_a_des_shdn {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A DES_SHDN";
++ };
++ video_a_led {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A LED";
++ };
++ };
++ };
++
++ i2c@5 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <5>;
++ /* Slot B (CN11) */
++
++ video_b_ext0: pca9535@26 {
++ compatible = "nxp,pca9535";
++ reg = <0x26>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_b_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg1";
++ };
++ video_b_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg0";
++ };
++ video_b_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR_SHDN";
++ };
++ video_b_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR0";
++ };
++ video_b_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR1";
++ };
++ video_b_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR2";
++ };
++ video_b_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR3";
++ };
++ video_b_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B DES_SHDN";
++ };
++ video_b_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B led";
++ };
++ };
++
++ video_b_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_b_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg2";
++ };
++ video_b_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg1";
++ };
++ video_b_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg0";
++ };
++ video_b_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR_SHDN";
++ };
++ video_b_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR0";
++ };
++ video_b_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR1";
++ };
++ video_b_cam_pwr2 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR2";
++ };
++ video_b_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR3";
++ };
++ video_b_des_shdn {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B DES_SHDN";
++ };
++ video_b_led {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B LED";
++ };
++ };
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++ /* Slot C (CN12) */
++ };
++ };
++};
++
++&i2c4 {
++ i2cswitch4: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* FAN node - EMC2103 */
++ fan_ctrl:ecm2103@2e {
++ compatible = "emc2103";
++ reg = <0x2e>;
++ };
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* Power nodes - 2 x TPS544x20 */
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* CAN and power board nodes */
++
++ gpio_ext_pwr: pca9535@22 {
++ compatible = "nxp,pca9535";
++ reg = <0x22>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio1>;
++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
++
++ /* enable input DCDC after wake-up signal released */
++ pwr_hold {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "pwr_hold";
++ };
++
++ /* CAN0 */
++ can0_stby {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can0_stby";
++ };
++ can0_load {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can0_120R_load";
++ };
++ /* CAN1 */
++ can1_stby {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can1_stby";
++ };
++ can1_load {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can1_120R_load";
++ };
++ /* CAN2 */
++ can2_stby {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can2_stby";
++ };
++ can2_load {
++ gpio-hog;
++ gpios = <2 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can2_120R_load";
++ };
++ can2_rst {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "can2_rst";
++ };
++ /* CAN3 */
++ can3_stby {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can3_stby";
++ };
++ can3_load {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can3_120R_load";
++ };
++ can3_rst {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "can3_rst";
++ };
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* FPDLink output node - DS90UH947 */
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++ /* BCM switch node */
++ };
++
++ i2c@5 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <5>;
++ /* LED board node(s) */
++
++ gpio_ext_led: pca9535@22 {
++ compatible = "nxp,pca9535";
++ reg = <0x22>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ /* gpios 0..7 are used for indication LEDs, low-active */
++ };
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* M2 connector i2c node(s) */
++ };
++
++ /* port 7 is not used */
++ };
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec0 {
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ vin0_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ vin0_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ vin1_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ vin1_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ vin2_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ vin3_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi41";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ vin4_ti964_des1ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep0>;
++ };
++ vin4_ti954_des1ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ vin5_ti964_des1ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep1>;
++ };
++ vin5_ti954_des1ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in6>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ vin6_ti964_des1ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in7>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ vin7_ti964_des1ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep3>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_41 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_41_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&rcar_sound {
++ pinctrl-0 = <&sound_clk_pins>;
++
++ /* Multi DAI */
++ #sound-dai-cells = <1>;
++};
++
++&sata {
++ status = "okay";
++};
++
++&ssi1 {
++ /delete-property/shared-pin;
++};
++
++&avb {
++ /delete-property/phy-handle;
++ /delete-property/phy-gpios;
++ phy-mode = "rgmii";
++
++ /delete-node/ethernet-phy@0;
++
++ fixed-link {
++ speed = <100>;
++ full-duplex;
++ };
++};
++
++&msiof1 {
++ status = "disabled";
++};
++
++&usb2_phy0 {
++ pinctrl-0 = <&usb0_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&xhci0 {
++ status = "okay";
++};
++
++&hsusb {
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&can1 {
++ pinctrl-0 = <&can1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&canfd {
++ pinctrl-0 = <&canfd0_pins &canfd1_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++
++ renesas,can-clock-select = <0x0>;
++
++ channel0 {
++ status = "okay";
++ };
++
++ channel1 {
++ status = "okay";
++ };
++};
++
++/* uncomment to enable CN12 on VIN4-7 */
++//#include "ulcb-vb-cn12.dtsi"
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts
+new file mode 100644
+index 0000000..de56fa4
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts
+@@ -0,0 +1,546 @@
++/*
++ * Device Tree Source for the H3ULCB.View board on r8a7795 ES1.x
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-es1-h3ulcb.dts"
++
++/ {
++ model = "Renesas H3ULCB.View board based on r8a7795";
++};
++
++&i2c4 {
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des0ep3: endpoint {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++
++ ov106xx@4 {
++ compatible = "ovti,ov106xx";
++ reg = <0x64>;
++
++ port@0 {
++ ov106xx_in4: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ };
++ };
++
++ ov106xx@5 {
++ compatible = "ovti,ov106xx";
++ reg = <0x65>;
++
++ port@0 {
++ ov106xx_in5: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ };
++ };
++
++ ov106xx@6 {
++ compatible = "ovti,ov106xx";
++ reg = <0x66>;
++
++ port@0 {
++ ov106xx_in6: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ };
++ };
++
++ ov106xx@7 {
++ compatible = "ovti,ov106xx";
++ reg = <0x67>;
++
++ port@0 {
++ ov106xx_in7: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des1ep3: endpoint {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ };
++ };
++
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x4c>;
++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++ maxim,i2c-quirk = <0x6c>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ max9286-max9271@1 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x6c>;
++ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des1ep0: endpoint@0 {
++ max9271-addr = <0x54>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ max9286_des1ep1: endpoint@1 {
++ max9271-addr = <0x55>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ max9286_des1ep2: endpoint@2 {
++ max9271-addr = <0x56>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ max9286_des1ep3: endpoint@3 {
++ max9271-addr = <0x57>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ max9286_csi2ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi41";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in6>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in7>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_41 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_41_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts
+new file mode 100644
+index 0000000..3f3d66a
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts
+@@ -0,0 +1,552 @@
++/*
++ * Device Tree Source for the Salvator-X.View board on r8a7795 ES1.x
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ * Copyright (C) 2015-2017 Cogent Embedded, Inc
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-es1-salvator-x.dts"
++
++/ {
++ model = "Renesas Salvator-X.View board based on r8a7795";
++};
++
++&pfc {
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ can1_pins: can1 {
++ groups = "can1_data";
++ function = "can1";
++ };
++};
++
++&i2c4 {
++ /delete-node/hdmi-in@34;
++ /delete-node/composite-in@70;
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des0ep3: endpoint {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++
++ ov106xx@4 {
++ compatible = "ovti,ov106xx";
++ reg = <0x64>;
++
++ port@0 {
++ ov106xx_in4: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ };
++ };
++
++ ov106xx@5 {
++ compatible = "ovti,ov106xx";
++ reg = <0x65>;
++
++ port@0 {
++ ov106xx_in5: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ };
++ };
++
++ ov106xx@6 {
++ compatible = "ovti,ov106xx";
++ reg = <0x66>;
++
++ port@0 {
++ ov106xx_in6: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ };
++ };
++
++ ov106xx@7 {
++ compatible = "ovti,ov106xx";
++ reg = <0x67>;
++
++ port@0 {
++ ov106xx_in7: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des1ep3: endpoint {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ };
++ };
++
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x4c>;
++ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++ maxim,i2c-quirk = <0x6c>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ max9286-max9271@1 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x6c>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des1ep0: endpoint@0 {
++ max9271-addr = <0x54>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ max9286_des1ep1: endpoint@1 {
++ max9271-addr = <0x55>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ max9286_des1ep2: endpoint@2 {
++ max9271-addr = <0x56>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ max9286_des1ep3: endpoint@3 {
++ max9271-addr = <0x57>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ max9286_csi2ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++};
++
++&vin0 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi41";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in6>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in7>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ };
++ };
++};
++
++&csi2_20 {
++ status = "disabled";
++ /delete-node/ports;
++};
++
++&csi2_40 {
++ /delete-node/ports;
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_41 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_41_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&can1 {
++ pinctrl-0 = <&can1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts
+new file mode 100644
+index 0000000..ae115bd
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts
+@@ -0,0 +1,22 @@
++/*
++ * Device Tree Source for the H3ULCB.HAD board Alfa side
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-h3ulcb-had.dtsi"
++
++/ {
++ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795";
++};
++
++&pciec0 {
++ status = "okay";
++
++ /* Root complex */
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts
+new file mode 100644
+index 0000000..805067e
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts
+@@ -0,0 +1,23 @@
++/*
++ * Device Tree Source for the H3ULCB.HAD board Beta side
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-h3ulcb-had.dtsi"
++
++/ {
++ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795";
++};
++
++&pciec0 {
++ status = "okay";
++
++ /* Endpoint */
++ endpoint;
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi
+new file mode 100644
+index 0000000..4a00426
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi
+@@ -0,0 +1,219 @@
++/*
++ * Device Tree Source for the H3ULCB.HAD board on r8a7795
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++/*
++ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides)
++ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0)
++ */
++
++#include "r8a7795-h3ulcb-view.dts"
++
++/ {
++ model = "Renesas H3ULCB.HAD board based on r8a7795";
++
++ aliases {
++ serial1 = &scif1;
++ spi1 = &spi0_gpio;
++ spi2 = &spi1_gpio;
++ };
++
++ chosen {
++ stdout-path = "serial1:115200n8";
++ };
++
++ spi0_gpio: spi_gpio@0 {
++ compatible = "spi-gpio";
++ num-chipselects = <1>;
++ gpio-sck = <&gpio5 17 0>;
++ gpio-mosi = <&gpio5 20 0>;
++ gpio-miso = <&gpio5 22 0>;
++ cs-gpios = <&gpio5 19 0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ spidev@0 {
++ compatible = "spi-gpio";
++ reg = <0>;
++ spi-max-frequency = <2000000>;
++ spi-cpha;
++ spi-cpol;
++ };
++ };
++
++ spi1_gpio: spi_gpio@1 {
++ compatible = "spi-gpio";
++ num-chipselects = <1>;
++ gpio-sck = <&gpio6 8 0>;
++ gpio-mosi = <&gpio6 7 0>;
++ gpio-miso = <&gpio6 10 0>;
++ cs-gpios = <&gpio6 5 0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ spidev@0 {
++ compatible = "spi-gpio";
++ reg = <0>;
++ spi-max-frequency = <2000000>;
++ spi-cpha;
++ spi-cpol;
++ };
++ };
++
++ hdmi1-out {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi1_con: endpoint {
++ remote-endpoint = <&rcar_dw_hdmi1_out>;
++ };
++ };
++ };
++};
++
++&du {
++ ports {
++ port@1 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi0_in>;
++ };
++ };
++ port@2 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi1_in>;
++ };
++ };
++ };
++};
++
++&hdmi1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ rcar_dw_hdmi1_in: endpoint {
++ remote-endpoint = <&du_out_hdmi1>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ rcar_dw_hdmi1_out: endpoint {
++ remote-endpoint = <&hdmi1_con>;
++ };
++ };
++ };
++};
++
++&pfc {
++ scif1_pins: scif1 {
++ groups = "scif1_data_a";
++ function = "scif1";
++ };
++
++ msiof0_pins: spi1 {
++ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd",
++ "msiof0_ss1";
++ function = "msiof0";
++ };
++
++ msiof1_pins: spi2 {
++ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a",
++ "msiof1_ss1_a";
++ function = "msiof1";
++ };
++
++ sound_clk_pins: sound-clk {
++ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
++ "audio_clkout_a" /*, "audio_clkout3_a"*/;
++ function = "audio_clk";
++ };
++
++ usb31_pins: usb31 {
++ groups = "usb31";
++ function = "usb31";
++ };
++
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ canfd0_pins: canfd0 {
++ groups = "canfd0_data_a";
++ function = "canfd0";
++ };
++};
++
++&scif1 {
++ pinctrl-0 = <&scif1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&avb {
++ /delete-property/phy-handle;
++ /delete-property/phy-gpios;
++ /delete-node/ethernet-phy@0;
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++};
++
++&msiof0 {
++ pinctrl-0 = <&msiof0_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++ cs-gpios = <&gpio5 19 0>;
++
++ spidev@0 {
++ compatible = "renesas,sh-msiof";
++ reg = <0>;
++ spi-max-frequency = <66666666>;
++ spi-cpha;
++ spi-cpol;
++ };
++};
++
++&msiof1 {
++ status = "disabled";
++ cs-gpios = <&gpio6 5 0>;
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++
++ renesas,can-clock-select = <0x0>;
++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */
++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */
++ >;
++};
++
++&canfd {
++ pinctrl-0 = <&canfd0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */
++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */
++ >;
++
++ channel0 {
++ status = "okay";
++ };
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts
+new file mode 100644
+index 0000000..4b10d31
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts
+@@ -0,0 +1,443 @@
++/*
++ * Device Tree Source for the H3ULCB Kingfisher V1 board
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-h3ulcb-kf.dts"
++
++/ {
++ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795";
++
++ aliases {
++ serial1 = &hscif0;
++ serial2 = &hscif1;
++ serial3 = &scif1;
++ };
++
++ wlan_en: regulator@4 {
++ compatible = "regulator-fixed";
++ regulator-name = "wlan-en-regulator";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ codec_en_reg: regulator@6 {
++ compatible = "regulator-fixed";
++ regulator-name = "codec-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 15 0>;
++
++ /* delay - CHECK */
++ startup-delay-us = <70000>;
++ enable-active-high;
++ };
++
++ amp_en_reg: regulator@7 {
++ compatible = "regulator-fixed";
++ regulator-name = "amp-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 0 0>;
++
++ startup-delay-us = <0>;
++ enable-active-high;
++ };
++
++ /delete-node/regulator@8;
++
++ sdio_switch: regulator@9 {
++ compatible = "regulator-fixed";
++ regulator-name = "wifi_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_74 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ /delete-node/regulator@10;
++
++ radio_switch: regulator@11 {
++ compatible = "regulator-fixed";
++ regulator-name = "radio_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ kim {
++ compatible = "kim";
++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */
++ /* serial1 */
++ dev_name = "/dev/ttySC1";
++ flow_cntrl = <1>;
++ /* int div 8 hscif@26.6666656MHz */
++ baud_rate = <3333332>;
++ };
++
++ hdmi-out {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con: endpoint {
++ remote-endpoint = <&adv7513_out>;
++ };
++ };
++ };
++};
++
++&pfc {
++ /delete-node/hscif4;
++
++ scif1_pins: scif1 {
++ groups = "scif1_data_b";
++ function = "scif1";
++ };
++
++ hscif0_pins: hscif0 {
++ groups = "hscif0_data", "hscif0_ctrl";
++ function = "hscif0";
++ };
++
++ hscif1_pins: hscif1 {
++ groups = "hscif1_data_a", "hscif1_ctrl_a";
++ function = "hscif1";
++ };
++
++ du_pins: du {
++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp";
++ function = "du";
++ };
++};
++
++&du {
++ pinctrl-0 = <&du_pins>;
++ pinctrl-names = "default";
++
++ ports {
++ port@0 {
++ endpoint {
++ remote-endpoint = <&adv7513_in>;
++ };
++ };
++ port@1 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi0_in>;
++ };
++ };
++ };
++};
++
++&gpio0 {
++ /delete-node/video_a_irq;
++ /delete-node/video_b_irq;
++ /delete-node/gpioext_2_20_irq;
++};
++
++&gpio1 {
++ /delete-node/gpioext_2_21_irq;
++ /delete-node/wifi_irq;
++};
++
++&gpio2 {
++ bl_pwm {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "BL PWM 100%";
++ };
++};
++
++&gpio5 {
++ /delete-node/touch_irq;
++ /delete-node/bt_strap;
++
++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */
++ /* Ignore these pins */
++ hscif0_cts {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "hscif0 CTS";
++ };
++
++ hscif0_rts {
++ gpio-hog;
++ gpios = <16 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "hscif0 RTS";
++ };
++};
++
++&gpio7 {
++ /delete-node/gpioext_2_21_irq;
++};
++
++&scif1 {
++ pinctrl-0 = <&scif1_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hscif0 {
++ pinctrl-0 = <&hscif0_pins>;
++ pinctrl-names = "default";
++ ctsrts;
++
++ status = "okay";
++};
++
++&hscif1 {
++ pinctrl-0 = <&hscif1_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hscif4 {
++ /delete-property/pinctrl-0;
++ /delete-property/pinctrl-names;
++
++ status = "disabled";
++};
++
++&i2c2 {
++ /delete-node/pca9535@20;
++ /delete-node/pca9535@21;
++
++ gpio_ext_74: pca9539@74 {
++ compatible = "nxp,pca9539";
++ reg = <0x74>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio6>;
++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
++
++ hub_pwen {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "HUB pwen";
++ };
++ hub_rst {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "HUB rst";
++ };
++ otg_offvbus {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "OTG off VBUSn";
++ };
++ otg_extlpn {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "OTG EXTLPn";
++ };
++ otg_stat1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "OTG Stat1";
++ };
++ otg_stat2 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "OTG Stat2";
++ };
++ };
++
++ gpio_ext_75: pca9539@75 {
++ compatible = "nxp,pca9539";
++ reg = <0x75>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio6>;
++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
++
++ gps_rst {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "GPS rst";
++ };
++ fpdl_shdn {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "FPDLink shdn";
++ };
++ };
++};
++
++&i2cswitch2 {
++ reg = <0x71>;
++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>;
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++
++ hdmi@3d {
++ compatible = "adi,adv7511w";
++ reg = <0x3d>;
++ interrupt-parent = <&gpio2>;
++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>;
++
++ adi,input-depth = <8>;
++ adi,input-colorspace = "rgb";
++ adi,input-clock = "1x";
++ adi,input-style = <1>;
++ adi,input-justification = "evenly";
++ adi,clock-delay = <1200>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ adv7513_in: endpoint {
++ remote-endpoint = <&du_out_rgb>;
++ };
++ };
++
++ port@1 {
++ reg = <1>;
++ adv7513_out: endpoint {
++ remote-endpoint = <&hdmi_con>;
++ };
++ };
++ };
++ };
++ };
++};
++
++&i2c4 {
++ /delete-node/pca9535@21;
++
++ gpio_ext_76: pca9539@76 {
++ compatible = "nxp,pca9539";
++ reg = <0x76>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio7>;
++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
++
++ port_b_a0 {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B A0";
++ };
++ port_b_a1 {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B A1";
++ };
++ port_a_a0 {
++ gpio-hog;
++ gpios = <2 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A A0";
++ };
++ port_a_a1 {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A A1";
++ };
++ /* pin 12 - CAM_CLK */
++ rpi_cam_io_1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO1";
++ };
++ /* pin 11 - CAM_GPIO - assume pwdn */
++ rpi_cam_io_0 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO0";
++ };
++ /* 0 - FPDLink output, 1 - LVDS output */
++ lvds_vs_fpdl {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "LVDS switch";
++ };
++ };
++
++ gpio_ext_77: pca9539@77 {
++ compatible = "nxp,pca9539";
++ reg = <0x77>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio5>;
++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
++
++ mpcie_wake {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "mPCIe WAKE#";
++ };
++ mpcie_wdisable {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "mPCIe W_DISABLE";
++ };
++ mpcie_clreq {
++ gpio-hog;
++ gpios = <2 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe CLKREQ#";
++ };
++ mpcie_ovc {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe OVC";
++ };
++ };
++};
++
++&i2cswitch4 {
++ reg = <0x71>;
++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
++};
++
++&wlcore {
++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
+new file mode 100644
+index 0000000..2c50230
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
+@@ -0,0 +1,1651 @@
++/*
++ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-h3ulcb.dts"
++
++/ {
++ model = "Renesas H3ULCB Kingfisher board based on r8a7795";
++
++ aliases {
++ serial1 = &hscif4;
++ };
++
++ snd_clk: snd_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <24576000>;
++ clock-output-names = "scki";
++ };
++
++ wlan_en: regulator@4 {
++ compatible = "regulator-fixed";
++ regulator-name = "wlan-en-regulator";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ vcc_sdhi3: regulator@41 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 Vcc";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vccq_sdhi3: regulator@5 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 VccQ";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ codec_en_reg: regulator@6 {
++ compatible = "regulator-fixed";
++ regulator-name = "codec-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 15 0>;
++
++ /* delay - CHECK */
++ startup-delay-us = <70000>;
++ enable-active-high;
++ };
++
++ amp_en_reg: regulator@7 {
++ compatible = "regulator-fixed";
++ regulator-name = "amp-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 0 0>;
++
++ startup-delay-us = <0>;
++ enable-active-high;
++ };
++
++ lvds_switch: regulator@8 {
++ compatible = "regulator-fixed";
++ regulator-name = "lvds_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio1 24 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ sdio_switch: regulator@9 {
++ compatible = "regulator-fixed";
++ regulator-name = "wifi_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_20 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ sound_switch: regulator@10 {
++ compatible = "regulator-fixed";
++ regulator-name = "pcm3168a_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_21 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ radio_switch: regulator@11 {
++ compatible = "regulator-fixed";
++ regulator-name = "radio_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ kim {
++ compatible = "kim";
++ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */
++ /* serial1 */
++ dev_name = "/dev/ttySC1";
++ flow_cntrl = <1>;
++ /* int div 8 hscif@26.6666656MHz */
++ baud_rate = <3333332>;
++ };
++
++ btwilink {
++ compatible = "btwilink";
++ };
++
++ sound_ext: sound@0 {
++ pinctrl-0 = <&sound_0_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "left_j";
++ simple-audio-card,name = "pcm3168a";
++
++ simple-audio-card,bitclock-master = <&sound_ext_master>;
++ simple-audio-card,frame-master = <&sound_ext_master>;
++ sound_ext_master: simple-audio-card,cpu@0 {
++ sound-dai = <&rcar_sound 0>;
++ dai-tdm-slot-num = <8>;
++ dai-tdm-slot-width = <32>;
++ };
++
++ simple-audio-card,codec@0 {
++ sound-dai = <&pcm3168a>;
++ dai-tdm-slot-num = <8>;
++ dai-tdm-slot-width = <32>;
++ system-clock-frequency = <24576000>;
++ };
++ };
++
++ /delete-node/sound;
++
++ rsnd_ak4613: sound@1 {
++ pinctrl-0 = <&sound_1_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "left_j";
++ simple-audio-card,name = "ak4613";
++
++ simple-audio-card,bitclock-master = <&sndcpu>;
++ simple-audio-card,frame-master = <&sndcpu>;
++
++ sndcpu: simple-audio-card,cpu@1 {
++ sound-dai = <&rcar_sound 1>;
++ };
++
++ sndcodec: simple-audio-card,codec@1 {
++ sound-dai = <&ak4613>;
++ };
++ };
++
++ sound_radio: sound@2 {
++ pinctrl-0 = <&sound_2_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "i2s";
++ simple-audio-card,name = "radio";
++
++ simple-audio-card,bitclock-master = <&sound_radio_master>;
++ simple-audio-card,frame-master = <&sound_radio_master>;
++ simple-audio-card,cpu@2 {
++ sound-dai = <&rcar_sound 2>;
++ };
++
++ sound_radio_master: simple-audio-card,codec@2 {
++ sound-dai = <&radio>;
++ system-clock-frequency = <12288000>;
++ };
++ };
++
++ lvds-encoder {
++ compatible = "thine,thc63lvdm83d";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ lvds_enc_in: endpoint {
++ remote-endpoint = <&du_out_lvds0>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ lvds_enc_out: endpoint {
++ remote-endpoint = <&lvds_in>;
++ };
++ };
++ };
++ };
++
++ lvds {
++ compatible = "lvds-connector";
++
++ width-mm = <210>;
++ height-mm = <158>;
++
++ panel-timing {
++ /* 1280x800 @60Hz */
++ clock-frequency = <65000000>;
++ hactive = <1280>;
++ vactive = <800>;
++ hsync-len = <40>;
++ hfront-porch = <80>;
++ hback-porch = <40>;
++ vfront-porch = <14>;
++ vback-porch = <14>;
++ vsync-len = <4>;
++ };
++
++ port {
++ lvds_in: endpoint {
++ remote-endpoint = <&lvds_enc_out>;
++ };
++ };
++ };
++
++ radio: si468x@0 {
++ compatible = "si,si468x-pcm";
++ status = "okay";
++
++ #sound-dai-cells = <0>;
++ };
++};
++
++&pfc {
++ hscif4_pins: hscif4 {
++ groups = "hscif4_data_a", "hscif4_ctrl";
++ function = "hscif4";
++ };
++
++ sdhi3_pins_3v3: sd3_3v3 {
++ groups = "sdhi3_data4", "sdhi3_ctrl";
++ function = "sdhi3";
++ power-source = <3300>;
++ };
++
++ sound_0_pins: sound0 {
++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data";
++ function = "ssi";
++ };
++
++ sound_1_pins: sound1 {
++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
++ function = "ssi";
++ };
++
++ sound_2_pins: sound2 {
++ groups = "ssi6_ctrl", "ssi6_data";
++ function = "ssi";
++ };
++
++ usb0_pins: usb0 {
++ groups = "usb0";
++ function = "usb0";
++ };
++
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ can1_pins: can1 {
++ groups = "can1_data";
++ function = "can1";
++ };
++
++ canfd0_pins: canfd0 {
++ groups = "canfd0_data_a";
++ function = "canfd0";
++ };
++
++ canfd1_pins: canfd1 {
++ groups = "canfd1_data";
++ function = "canfd1";
++ };
++};
++
++&gpio0 {
++ video_a_irq {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A irq";
++ };
++
++ video_b_irq {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B irq";
++ };
++
++ gpioext_2_20_irq {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x20@i2c2 irq";
++ };
++};
++
++&gpio1 {
++ gpioext_2_21_irq {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x21@i2c2 irq";
++ };
++
++ wifi_irq {
++ gpio-hog;
++ gpios = <25 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "wifi irq";
++ };
++};
++
++&gpio5 {
++ touch_irq {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "touch irq";
++ };
++
++ /* From TI forum */
++ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */
++ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */
++ bt_strap {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "BT strap pin";
++ };
++};
++
++&gpio7 {
++ gpioext_2_21_irq {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x21@i2c4 irq";
++ };
++};
++
++&hscif4 {
++ pinctrl-0 = <&hscif4_pins>;
++ pinctrl-names = "default";
++ ctsrts;
++
++ status = "okay";
++};
++
++&i2c2 {
++ clock-frequency = <400000>;
++
++ gpio_ext_20: pca9535@20 {
++ compatible = "nxp,pca9535";
++ reg = <0x20>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio0>;
++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
++ };
++
++ gpio_ext_21: pca9535@21 {
++ compatible = "nxp,pca9535";
++ reg = <0x21>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio1>;
++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
++ };
++
++ i2cswitch2: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* BCM node(s) */
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* USB3.0 HUB node(s) */
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* Power amp node(s) */
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* Radio node(s) */
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++ /* A2B node(s) */
++ };
++
++ i2c@5 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <5>;
++ /* PCIe node(s) */
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* LVDS display node(s) */
++
++ polytouch: edt-ft5x06@38 {
++ compatible = "edt,edt-ft5x06";
++ reg = <0x38>;
++ interrupt-parent = <&gpio5>;
++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
++ };
++ };
++
++ i2c@7 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <7>;
++ /* Audio, GPS and Gyro node(s) */
++
++ pcm3168a: audio-codec@44 {
++ #sound-dai-cells = <0>;
++ compatible = "ti,pcm3168a";
++ reg = <0x44>;
++ clocks = <&snd_clk>;
++ clock-names = "scki";
++ tdm;
++ VDD1-supply = <&codec_en_reg>;
++ VDD2-supply = <&codec_en_reg>;
++ VCCAD1-supply = <&codec_en_reg>;
++ VCCAD2-supply = <&codec_en_reg>;
++ VCCDA1-supply = <&amp_en_reg>;
++ VCCDA2-supply = <&amp_en_reg>;
++ };
++
++ lsm9ds0_acc_mag@1d {
++ compatible = "st,lsm9ds0_acc_mag";
++ reg = <0x1d>;
++ };
++
++ lsm9ds0_gyr@6b {
++ compatible = "st,lsm9ds0-gyro";
++ reg = <0x6b>;
++ };
++
++ /* GPS@ 0x42 */
++ };
++ };
++};
++
++&i2c4 {
++ gpio_ext_22: pca9535@21 {
++ compatible = "nxp,pca9535";
++ reg = <0x22>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio7>;
++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
++
++ /* pin 12 - CAM_CLK */
++ rpi_cam_io_1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO1";
++ };
++ /* pin 11 - CAM_GPIO - assume pwdn */
++ rpi_cam_io_0 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO0";
++ };
++ };
++
++ i2cswitch4: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* SAM node(s) */
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* Slot A (CN10) */
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ ov106xx_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ ov106xx_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ ov106xx_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ ov106xx_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ ov106xx_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ ov106xx_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@0 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti964_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti964_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ ti964_des0ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ ti964_des0ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ ti964_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@0 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti954_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti954_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ ti954_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2a */
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2a>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* Slot B (CN11) */
++
++ ov106xx@4 {
++ compatible = "ovti,ov106xx";
++ reg = <0x64>;
++
++ port@0 {
++ ov106xx_in4: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ ov106xx_ti964_des1ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep0>;
++ };
++ ov106xx_ti954_des1ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep0>;
++ };
++ };
++ };
++
++ ov106xx@5 {
++ compatible = "ovti,ov106xx";
++ reg = <0x65>;
++
++ port@0 {
++ ov106xx_in5: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ ov106xx_ti964_des1ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep1>;
++ };
++ ov106xx_ti954_des1ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep1>;
++ };
++ };
++ };
++
++ ov106xx@6 {
++ compatible = "ovti,ov106xx";
++ reg = <0x66>;
++
++ port@0 {
++ ov106xx_in6: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ ov106xx_ti964_des1ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep2>;
++ };
++ };
++ };
++
++ ov106xx@7 {
++ compatible = "ovti,ov106xx";
++ reg = <0x67>;
++
++ port@0 {
++ ov106xx_in7: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ ov106xx_ti964_des1ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@1 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti964_des1ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ ti964_des1ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ ti964_des1ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ ti964_des1ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ ti964_csi2ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@1 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti954_des1ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ ti954_des1ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ };
++ port@1 {
++ ti954_csi2ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2a */
++ max9286-max9271@1 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2a>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des1ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ max9286_des1ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ max9286_des1ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ max9286_des1ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ max9286_csi2ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* Slot B (CN11) */
++
++ video_b_ext0: pca9535@27 {
++ compatible = "nxp,pca9535";
++ reg = <0x27>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_b_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B cfg1";
++ };
++ video_b_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B cfg0";
++ };
++ video_b_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR_SHDN";
++ };
++ video_b_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR0";
++ };
++ video_b_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR1";
++ };
++ video_b_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR2";
++ };
++ video_b_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR3";
++ };
++ video_b_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B DES_SHDN";
++ };
++ video_b_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B led";
++ };
++ };
++
++ video_b_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_b_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B cfg2";
++ };
++ video_b_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B cfg1";
++ };
++ video_b_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B cfg0";
++ };
++ video_b_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR_SHDN";
++ };
++ video_b_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR0";
++ };
++ video_b_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR1";
++ };
++ video_b_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR3";
++ };
++ };
++ };
++
++ i2c@7 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <7>;
++ /* Slot A (CN10) */
++
++ video_a_ext0: pca9535@26 {
++ compatible = "nxp,pca9535";
++ reg = <0x26>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR2";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ video_a_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A DES_SHDN";
++ };
++ video_a_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A led";
++ };
++ };
++
++ video_a_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg2";
++ };
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ };
++ };
++ };
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec0 {
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ vin0_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ vin0_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ vin1_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ vin1_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ vin2_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ vin3_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi41";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ vin4_ti964_des1ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep0>;
++ };
++ vin4_ti954_des1ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ vin5_ti964_des1ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep1>;
++ };
++ vin5_ti954_des1ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in6>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ vin6_ti964_des1ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in7>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ vin7_ti964_des1ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep3>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_41 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_41_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&rcar_sound {
++ pinctrl-0 = <&sound_clk_pins>;
++
++ /* Multi DAI */
++ #sound-dai-cells = <1>;
++
++ rcar_sound,dai {
++ dai0 {
++ playback = <&ssi7>;
++ capture = <&ssi8>;
++ };
++
++ dai1 {
++ playback = <&ssi0 &src0 &dvc0>;
++ capture = <&ssi1 &src1 &dvc1>;
++ };
++
++ dai2 {
++ capture = <&ssi6>;
++ };
++ };
++};
++
++&sdhi3 {
++ pinctrl-0 = <&sdhi3_pins_3v3>;
++ pinctrl-names = "default";
++
++ vmmc-supply = <&wlan_en>;
++ vqmmc-supply = <&vccq_sdhi3>;
++ keep-power-in-suspend;
++ enable-sdio-wakeup;
++ bus-width = <4>;
++ no-1-8-v;
++ non-removable;
++ cap-power-off-card;
++ max-frequency = <26000000>;
++ status = "okay";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ wlcore: wlcore@2 {
++ compatible = "ti,wl1837";
++ reg = <2>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
++ };
++};
++
++&usb2_phy0 {
++ pinctrl-0 = <&usb0_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&xhci0 {
++ status = "okay";
++};
++
++&msiof1 {
++ status = "disabled";
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&can1 {
++ pinctrl-0 = <&can1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&canfd {
++ pinctrl-0 = <&canfd0_pins &canfd1_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++
++ channel0 {
++ status = "okay";
++ };
++
++ channel1 {
++ status = "okay";
++ };
++};
++
++/* uncomment to enable CN48 on VIN4 */
++//#include "ulcb-kf-rpi.dtsi"
++/* uncomment to enable CN47: SD on SDHI3 */
++//#include "ulcb-kf-sd3.dtsi"
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts
+new file mode 100644
+index 0000000..a26689c
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts
+@@ -0,0 +1,1787 @@
++/*
++ * Device Tree Source for the H3ULCB Videobox board
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-h3ulcb.dts"
++
++/ {
++ model = "Renesas H3ULCB Videobox board based on r8a7795";
++
++ leds {
++ compatible = "gpio-leds";
++
++ led5 {
++ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
++ };
++ led6 {
++ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
++ };
++ /* D13 - status 0 */
++ led_ext00 {
++ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "heartbeat";
++ };
++ /* D14 - status 1 */
++ led_ext01 {
++ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "mmc1";
++ };
++ /* D16 - HDMI1 */
++ led_ext02 {
++ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>;
++ };
++ /* D18 - HDMI0 */
++ led_ext03 {
++ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>;
++ };
++ /* D20 - USB3.0 - 0.1 */
++ led_ext04 {
++ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>;
++ };
++ /* D21 - USB3.0 - 0.2 */
++ led_ext05 {
++ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>;
++ };
++ /* D24 - USB3.0 - 1.1 */
++ led6_ext06 {
++ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>;
++ };
++ /* D25 - USB3.0 - 1.2 */
++ led_ext07 {
++ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ snd_clk: snd_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <24576000>;
++ clock-output-names = "scki";
++ };
++
++ vccq_sdhi3: regulator@5 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 VccQ";
++ /* external voltage translator to 1.8V */
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ fpdlink_switch: regulator@8 {
++ compatible = "regulator-fixed";
++ regulator-name = "fpdlink_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio1 20 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ hub_reset: regulator@9 {
++ compatible = "regulator-fixed";
++ regulator-name = "hub_reset";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio5 5 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ hub_power: regulator@10 {
++ compatible = "regulator-fixed";
++ regulator-name = "hub_power";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio6 28 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ /delete-node/sound;
++
++ rsnd_ak4613: sound@0 {
++ pinctrl-0 = <&sound_0_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "left_j";
++ simple-audio-card,name = "ak4613";
++
++ simple-audio-card,bitclock-master = <&sndcpu>;
++ simple-audio-card,frame-master = <&sndcpu>;
++
++ sndcpu: simple-audio-card,cpu@1 {
++ sound-dai = <&rcar_sound>;
++ };
++
++ sndcodec: simple-audio-card,codec@1 {
++ sound-dai = <&ak4613>;
++ };
++ };
++
++ lvds-encoder {
++ compatible = "thine,thc63lvdm83d";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ lvds_enc_in: endpoint {
++ remote-endpoint = <&du_out_lvds0>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ lvds_enc_out: endpoint {
++ remote-endpoint = <&lvds_in>;
++ };
++ };
++ };
++ };
++
++ lvds {
++ compatible = "lvds-connector";
++
++ width-mm = <210>;
++ height-mm = <158>;
++
++ panel-timing {
++ /* 1280x800 @60Hz */
++ clock-frequency = <65000000>;
++ hactive = <1280>;
++ vactive = <800>;
++ hsync-len = <40>;
++ hfront-porch = <80>;
++ hback-porch = <40>;
++ vfront-porch = <14>;
++ vback-porch = <14>;
++ vsync-len = <4>;
++ };
++
++ port {
++ lvds_in: endpoint {
++ remote-endpoint = <&lvds_enc_out>;
++ };
++ };
++ };
++
++ hdmi1-out {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi1_con: endpoint {
++ remote-endpoint = <&rcar_dw_hdmi1_out>;
++ };
++ };
++ };
++
++ excan_ref_clk: excan-ref-clock {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <16000000>;
++ };
++
++ radio: si468x@0 {
++ compatible = "si,si468x-pcm";
++ status = "okay";
++
++ #sound-dai-cells = <0>;
++ };
++
++ spi_gpio_sw {
++ compatible = "spi-gpio";
++ #address-cells = <0x1>;
++ #size-cells = <0x0>;
++ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>;
++ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>;
++ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>;
++ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
++ num-chipselects = <1>;
++
++ spidev: spidev@0 {
++ compatible = "spidev", "spi-gpio";
++ reg = <0>;
++ spi-max-frequency = <25000000>;
++ spi-cpha;
++ spi-cpol;
++ };
++ };
++
++ spi_gpio_can {
++ compatible = "spi-gpio";
++ #address-cells = <0x1>;
++ #size-cells = <0x0>;
++ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>;
++ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>;
++ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>;
++ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
++ &gpio1 4 GPIO_ACTIVE_HIGH>;
++ num-chipselects = <2>;
++
++ spican0: spidev@0 {
++ compatible = "microchip,mcp2515";
++ reg = <0>;
++ clocks = <&excan_ref_clk>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <15 GPIO_ACTIVE_LOW>;
++ spi-max-frequency = <10000000>;
++ };
++ spican1: spidev@1 {
++ compatible = "microchip,mcp2515";
++ reg = <1>;
++ clocks = <&excan_ref_clk>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <5 GPIO_ACTIVE_LOW>;
++ spi-max-frequency = <10000000>;
++ };
++ };
++};
++
++&du {
++ ports {
++ port@1 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi0_in>;
++ };
++ };
++ port@2 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi1_in>;
++ };
++ };
++ port@3 {
++ endpoint {
++ remote-endpoint = <&lvds_enc_in>;
++ };
++ };
++ };
++};
++
++&hdmi1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ rcar_dw_hdmi1_in: endpoint {
++ remote-endpoint = <&du_out_hdmi1>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ rcar_dw_hdmi1_out: endpoint {
++ remote-endpoint = <&hdmi1_con>;
++ };
++ };
++ };
++};
++
++&pfc {
++ hscif4_pins: hscif4 {
++ groups = "hscif4_data_a", "hscif4_ctrl";
++ function = "hscif4";
++ };
++
++ sdhi3_pins_3v3: sd3_3v3 {
++ groups = "sdhi3_data4", "sdhi3_ctrl";
++ function = "sdhi3";
++ power-source = <3300>;
++ };
++
++ /delete-node/sound;
++
++ sound_0_pins: sound1 {
++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
++ function = "ssi";
++ };
++
++ usb0_pins: usb0 {
++ groups = "usb0";
++ function = "usb0";
++ };
++
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ can1_pins: can1 {
++ groups = "can1_data";
++ function = "can1";
++ };
++
++ canfd0_pins: canfd0 {
++ groups = "canfd0_data_a";
++ function = "canfd0";
++ };
++
++ canfd1_pins: canfd1 {
++ groups = "canfd1_data";
++ function = "canfd1";
++ };
++};
++
++&gpio0 {
++ video_a_irq {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A irq";
++ };
++
++ video_b_irq {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B irq";
++ };
++
++ video_c_irq {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-C irq";
++ };
++};
++
++&gpio1 {
++ gpioext_4_22_irq {
++ gpio-hog;
++ gpios = <25 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x22@i2c4 irq";
++ };
++ pcie_disable {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "mPCIe W_DISABLE";
++ };
++ m2_sleep {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "M.2 SLEEP#";
++ };
++ m2_pres {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 Present";
++ };
++ m2_pcie_det {
++ gpio-hog;
++ gpios = <18 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 PCIe detected";
++ };
++ m2_usb_det {
++ gpio-hog;
++ gpios = <19 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 USB30 detected";
++ };
++ m2_usb_det {
++ gpio-hog;
++ gpios = <27 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 SSD detected";
++ };
++ eth_phy_reset {
++ gpio-hog;
++ gpios = <16 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "BR phy reset";
++ };
++ eth_sw_reset {
++ gpio-hog;
++ gpios = <17 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "BR switch reset";
++ };
++};
++
++&gpio2 {
++ m2_wake {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "M.2 WAKE#";
++ };
++ m2_pcie_en {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "M.2 PCIe enable";
++ };
++};
++
++&gpio3 {
++ m2_power_off {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "M.2 FULL_CARD_POWER_OFF#";
++ };
++};
++
++&gpio6 {
++ pcie_wake {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe WAKE#";
++ };
++ pcie_clkreq {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe CLKREQ#";
++ };
++ m2_rst {
++ gpio-hog;
++ gpios = <21 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "M.2 RESET#";
++ };
++};
++
++&hscif4 {
++ pinctrl-0 = <&hscif4_pins>;
++ pinctrl-names = "default";
++ ctsrts;
++
++ status = "okay";
++};
++
++&i2c2 {
++ clock-frequency = <400000>;
++
++ i2cswitch2: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* USB3.0 HUB node(s) */
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* PCIe node(s) */
++ };
++
++ i2c@7 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <7>;
++ /* Slot A (CN10) */
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ ov106xx_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ ov106xx_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ ov106xx_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ ov106xx_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ ov106xx_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ ov106xx_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@0 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "stp";
++
++ port@0 {
++ ti964_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti964_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ ti964_des0ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ ti964_des0ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ ti964_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@0 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "stp";
++
++ port@0 {
++ ti954_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti954_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ ti954_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2c */
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2c>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* Slot B (CN11) */
++
++ ov106xx@4 {
++ compatible = "ovti,ov106xx";
++ reg = <0x64>;
++
++ port@0 {
++ ov106xx_in4: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ ov106xx_ti964_des1ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep0>;
++ };
++ ov106xx_ti954_des1ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep0>;
++ };
++ };
++ };
++
++ ov106xx@5 {
++ compatible = "ovti,ov106xx";
++ reg = <0x65>;
++
++ port@0 {
++ ov106xx_in5: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ ov106xx_ti964_des1ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep1>;
++ };
++ ov106xx_ti954_des1ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep1>;
++ };
++ };
++ };
++
++ ov106xx@6 {
++ compatible = "ovti,ov106xx";
++ reg = <0x66>;
++
++ port@0 {
++ ov106xx_in6: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ ov106xx_ti964_des1ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep2>;
++ };
++ };
++ };
++
++ ov106xx@7 {
++ compatible = "ovti,ov106xx";
++ reg = <0x67>;
++
++ port@0 {
++ ov106xx_in7: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ ov106xx_ti964_des1ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@1 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "stp";
++
++ port@0 {
++ ti964_des1ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ ti964_des1ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ ti964_des1ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ ti964_des1ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ ti964_csi2ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@1 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "stp";
++
++ port@0 {
++ ti954_des1ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ ti954_des1ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ };
++ port@1 {
++ ti954_csi2ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2c */
++ max9286-max9271@1 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2c>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des1ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ max9286_des1ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ max9286_des1ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ max9286_des1ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ max9286_csi2ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* Slot C (CN12) */
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* Slot A (CN10) */
++
++ video_a_ext0: pca9535@26 {
++ compatible = "nxp,pca9535";
++ reg = <0x26>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR2";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ video_a_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A DES_SHDN";
++ };
++ video_a_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A led";
++ };
++ };
++
++ video_a_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg2";
++ };
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr2 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR2";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ video_a_des_shdn {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A DES_SHDN";
++ };
++ video_a_led {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A LED";
++ };
++ };
++ };
++
++ i2c@5 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <5>;
++ /* Slot B (CN11) */
++
++ video_b_ext0: pca9535@26 {
++ compatible = "nxp,pca9535";
++ reg = <0x26>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_b_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg1";
++ };
++ video_b_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg0";
++ };
++ video_b_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR_SHDN";
++ };
++ video_b_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR0";
++ };
++ video_b_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR1";
++ };
++ video_b_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR2";
++ };
++ video_b_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR3";
++ };
++ video_b_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B DES_SHDN";
++ };
++ video_b_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B led";
++ };
++ };
++
++ video_b_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_b_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg2";
++ };
++ video_b_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg1";
++ };
++ video_b_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B cfg0";
++ };
++ video_b_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR_SHDN";
++ };
++ video_b_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR0";
++ };
++ video_b_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR1";
++ };
++ video_b_cam_pwr2 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR2";
++ };
++ video_b_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B PWR3";
++ };
++ video_b_des_shdn {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B DES_SHDN";
++ };
++ video_b_led {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B LED";
++ };
++ };
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++ /* Slot C (CN12) */
++ };
++ };
++};
++
++&i2c4 {
++ i2cswitch4: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* FAN node - EMC2103 */
++ fan_ctrl:ecm2103@2e {
++ compatible = "emc2103";
++ reg = <0x2e>;
++ };
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* Power nodes - 2 x TPS544x20 */
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* CAN and power board nodes */
++
++ gpio_ext_pwr: pca9535@22 {
++ compatible = "nxp,pca9535";
++ reg = <0x22>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio1>;
++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
++
++ /* enable input DCDC after wake-up signal released */
++ pwr_hold {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "pwr_hold";
++ };
++
++ /* CAN0 */
++ can0_stby {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can0_stby";
++ };
++ can0_load {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can0_120R_load";
++ };
++ /* CAN1 */
++ can1_stby {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can1_stby";
++ };
++ can1_load {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can1_120R_load";
++ };
++ /* CAN2 */
++ can2_stby {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can2_stby";
++ };
++ can2_load {
++ gpio-hog;
++ gpios = <2 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can2_120R_load";
++ };
++ can2_rst {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "can2_rst";
++ };
++ /* CAN3 */
++ can3_stby {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can3_stby";
++ };
++ can3_load {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "can3_120R_load";
++ };
++ can3_rst {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "can3_rst";
++ };
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* FPDLink output node - DS90UH947 */
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++ /* BCM switch node */
++ };
++
++ i2c@5 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <5>;
++ /* LED board node(s) */
++
++ gpio_ext_led: pca9535@22 {
++ compatible = "nxp,pca9535";
++ reg = <0x22>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ /* gpios 0..7 are used for indication LEDs, low-active */
++ };
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* M2 connector i2c node(s) */
++ };
++
++ /* port 7 is not used */
++ };
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec0 {
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ vin0_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ vin0_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ vin1_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ vin1_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ vin2_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ vin3_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi41";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ vin4_ti964_des1ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep0>;
++ };
++ vin4_ti954_des1ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ vin5_ti964_des1ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep1>;
++ };
++ vin5_ti954_des1ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des1ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in6>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ vin6_ti964_des1ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in7>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ vin7_ti964_des1ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des1ep3>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_41 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_41_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&rcar_sound {
++ pinctrl-0 = <&sound_clk_pins>;
++
++ /* Multi DAI */
++ #sound-dai-cells = <1>;
++};
++
++&sata {
++ status = "okay";
++};
++
++&ssi1 {
++ /delete-property/shared-pin;
++};
++
++&avb {
++ /delete-property/phy-handle;
++ /delete-property/phy-gpios;
++ phy-mode = "rgmii";
++
++ /delete-node/ethernet-phy@0;
++
++ fixed-link {
++ speed = <100>;
++ full-duplex;
++ };
++};
++
++&msiof1 {
++ status = "disabled";
++};
++
++&usb2_phy0 {
++ pinctrl-0 = <&usb0_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&xhci0 {
++ status = "okay";
++};
++
++&hsusb0 {
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&can1 {
++ pinctrl-0 = <&can1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&canfd {
++ pinctrl-0 = <&canfd0_pins &canfd1_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++
++ renesas,can-clock-select = <0x0>;
++
++ channel0 {
++ status = "okay";
++ };
++
++ channel1 {
++ status = "okay";
++ };
++};
++
++/* uncomment to enable CN12 on VIN4-7 */
++//#include "ulcb-vb-cn12.dtsi"
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts
+new file mode 100644
+index 0000000..2c24b85
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts
+@@ -0,0 +1,546 @@
++/*
++ * Device Tree Source for the H3ULCB.View board
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-h3ulcb.dts"
++
++/ {
++ model = "Renesas H3ULCB.View board based on r8a7795";
++};
++
++&i2c4 {
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des0ep3: endpoint {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++
++ ov106xx@4 {
++ compatible = "ovti,ov106xx";
++ reg = <0x64>;
++
++ port@0 {
++ ov106xx_in4: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ };
++ };
++
++ ov106xx@5 {
++ compatible = "ovti,ov106xx";
++ reg = <0x65>;
++
++ port@0 {
++ ov106xx_in5: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ };
++ };
++
++ ov106xx@6 {
++ compatible = "ovti,ov106xx";
++ reg = <0x66>;
++
++ port@0 {
++ ov106xx_in6: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ };
++ };
++
++ ov106xx@7 {
++ compatible = "ovti,ov106xx";
++ reg = <0x67>;
++
++ port@0 {
++ ov106xx_in7: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des1ep3: endpoint {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ };
++ };
++
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x4c>;
++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++ maxim,i2c-quirk = <0x6c>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ max9286-max9271@1 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x6c>;
++ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des1ep0: endpoint@0 {
++ max9271-addr = <0x54>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ max9286_des1ep1: endpoint@1 {
++ max9271-addr = <0x55>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ max9286_des1ep2: endpoint@2 {
++ max9271-addr = <0x56>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ max9286_des1ep3: endpoint@3 {
++ max9271-addr = <0x57>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ max9286_csi2ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi41";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in6>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in7>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_41 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_41_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts
+new file mode 100644
+index 0000000..fb12a39f3
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts
+@@ -0,0 +1,552 @@
++/*
++ * Device Tree Source for the Salvator-X.View board
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ * Copyright (C) 2015-2017 Cogent Embedded, Inc
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-salvator-x.dts"
++
++/ {
++ model = "Renesas Salvator-X.View board based on r8a7795";
++};
++
++&pfc {
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ can1_pins: can1 {
++ groups = "can1_data";
++ function = "can1";
++ };
++};
++
++&i2c4 {
++ /delete-node/hdmi-in@34;
++ /delete-node/composite-in@70;
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des0ep3: endpoint {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++
++ ov106xx@4 {
++ compatible = "ovti,ov106xx";
++ reg = <0x64>;
++
++ port@0 {
++ ov106xx_in4: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ };
++ };
++
++ ov106xx@5 {
++ compatible = "ovti,ov106xx";
++ reg = <0x65>;
++
++ port@0 {
++ ov106xx_in5: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ };
++ };
++
++ ov106xx@6 {
++ compatible = "ovti,ov106xx";
++ reg = <0x66>;
++
++ port@0 {
++ ov106xx_in6: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ };
++ };
++
++ ov106xx@7 {
++ compatible = "ovti,ov106xx";
++ reg = <0x67>;
++
++ port@0 {
++ ov106xx_in7: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des1ep3: endpoint {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ };
++ };
++
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x4c>;
++ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++ maxim,i2c-quirk = <0x6c>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ max9286-max9271@1 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x6c>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des1ep0: endpoint@0 {
++ max9271-addr = <0x54>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in4>;
++ };
++ max9286_des1ep1: endpoint@1 {
++ max9271-addr = <0x55>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ };
++ max9286_des1ep2: endpoint@2 {
++ max9271-addr = <0x56>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in6>;
++ };
++ max9286_des1ep3: endpoint@3 {
++ max9271-addr = <0x57>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in7>;
++ };
++ };
++ port@1 {
++ max9286_csi2ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ };
++};
++
++&vin0 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi41";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in4>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des1ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in5>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des1ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in6>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des1ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi41";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in7>;
++ data-lanes = <1 2 3 4>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_41_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des1ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des1ep3>;
++ };
++ };
++ };
++};
++
++&csi2_20 {
++ status = "disabled";
++ /delete-node/ports;
++};
++
++&csi2_40 {
++ /delete-node/ports;
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_41 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_41_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&can1 {
++ pinctrl-0 = <&can1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts
+new file mode 100644
+index 0000000..ff0ec0f
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts
+@@ -0,0 +1,443 @@
++/*
++ * Device Tree Source for the M3ULCB Kingfisher V1 board
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7796-m3ulcb-kf.dts"
++
++/ {
++ model = "Renesas M3ULCB Kingfisher V1 board based on r8a7796";
++
++ aliases {
++ serial1 = &hscif0;
++ serial2 = &hscif1;
++ serial3 = &scif1;
++ };
++
++ wlan_en: regulator@4 {
++ compatible = "regulator-fixed";
++ regulator-name = "wlan-en-regulator";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ codec_en_reg: regulator@6 {
++ compatible = "regulator-fixed";
++ regulator-name = "codec-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 15 0>;
++
++ /* delay - CHECK */
++ startup-delay-us = <70000>;
++ enable-active-high;
++ };
++
++ amp_en_reg: regulator@7 {
++ compatible = "regulator-fixed";
++ regulator-name = "amp-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_74 0 0>;
++
++ startup-delay-us = <0>;
++ enable-active-high;
++ };
++
++ /delete-node/regulator@8;
++
++ sdio_switch: regulator@9 {
++ compatible = "regulator-fixed";
++ regulator-name = "wifi_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_74 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ /delete-node/regulator@10;
++
++ radio_switch: regulator@11 {
++ compatible = "regulator-fixed";
++ regulator-name = "radio_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ kim {
++ compatible = "kim";
++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */
++ /* serial1 */
++ dev_name = "/dev/ttySC1";
++ flow_cntrl = <1>;
++ /* int div 8 hscif@26.6666656MHz */
++ baud_rate = <3333332>;
++ };
++
++ hdmi-out {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con: endpoint {
++ remote-endpoint = <&adv7513_out>;
++ };
++ };
++ };
++};
++
++&pfc {
++ /delete-node/hscif4;
++
++ scif1_pins: scif1 {
++ groups = "scif1_data_b";
++ function = "scif1";
++ };
++
++ hscif0_pins: hscif0 {
++ groups = "hscif0_data", "hscif0_ctrl";
++ function = "hscif0";
++ };
++
++ hscif1_pins: hscif1 {
++ groups = "hscif1_data_a", "hscif1_ctrl_a";
++ function = "hscif1";
++ };
++
++ du_pins: du {
++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp";
++ function = "du";
++ };
++};
++
++&du {
++ pinctrl-0 = <&du_pins>;
++ pinctrl-names = "default";
++
++ ports {
++ port@0 {
++ endpoint {
++ remote-endpoint = <&adv7513_in>;
++ };
++ };
++ port@1 {
++ endpoint {
++ remote-endpoint = <&rcar_dw_hdmi0_in>;
++ };
++ };
++ };
++};
++
++&gpio0 {
++ /delete-node/video_a_irq;
++ /delete-node/video_b_irq;
++ /delete-node/gpioext_2_20_irq;
++};
++
++&gpio1 {
++ /delete-node/gpioext_2_21_irq;
++ /delete-node/wifi_irq;
++};
++
++&gpio2 {
++ bl_pwm {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "BL PWM 100%";
++ };
++};
++
++&gpio5 {
++ /delete-node/touch_irq;
++ /delete-node/bt_strap;
++
++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */
++ /* Ignore these pins */
++ hscif0_cts {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "hscif0 CTS";
++ };
++
++ hscif0_rts {
++ gpio-hog;
++ gpios = <16 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "hscif0 RTS";
++ };
++};
++
++&gpio7 {
++ /delete-node/gpioext_2_21_irq;
++};
++
++&scif1 {
++ pinctrl-0 = <&scif1_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hscif0 {
++ pinctrl-0 = <&hscif0_pins>;
++ pinctrl-names = "default";
++ ctsrts;
++
++ status = "okay";
++};
++
++&hscif1 {
++ pinctrl-0 = <&hscif1_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hscif4 {
++ /delete-property/pinctrl-0;
++ /delete-property/pinctrl-names;
++
++ status = "disabled";
++};
++
++&i2c2 {
++ /delete-node/pca9535@20;
++ /delete-node/pca9535@21;
++
++ gpio_ext_74: pca9539@74 {
++ compatible = "nxp,pca9539";
++ reg = <0x74>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio6>;
++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
++
++ hub_pwen {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "HUB pwen";
++ };
++ hub_rst {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "HUB rst";
++ };
++ otg_offvbus {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "OTG off VBUSn";
++ };
++ otg_extlpn {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "OTG EXTLPn";
++ };
++ otg_stat1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "OTG Stat1";
++ };
++ otg_stat2 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "OTG Stat2";
++ };
++ };
++
++ gpio_ext_75: pca9539@75 {
++ compatible = "nxp,pca9539";
++ reg = <0x75>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio6>;
++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
++
++ gps_rst {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "GPS rst";
++ };
++ fpdl_shdn {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "FPDLink shdn";
++ };
++ };
++};
++
++&i2cswitch2 {
++ reg = <0x71>;
++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>;
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++
++ hdmi@3d {
++ compatible = "adi,adv7511w";
++ reg = <0x3d>;
++ interrupt-parent = <&gpio2>;
++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>;
++
++ adi,input-depth = <8>;
++ adi,input-colorspace = "rgb";
++ adi,input-clock = "1x";
++ adi,input-style = <1>;
++ adi,input-justification = "evenly";
++ adi,clock-delay = <1200>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ adv7513_in: endpoint {
++ remote-endpoint = <&du_out_rgb>;
++ };
++ };
++
++ port@1 {
++ reg = <1>;
++ adv7513_out: endpoint {
++ remote-endpoint = <&hdmi_con>;
++ };
++ };
++ };
++ };
++ };
++};
++
++&i2c4 {
++ /delete-node/pca9535@21;
++
++ gpio_ext_76: pca9539@76 {
++ compatible = "nxp,pca9539";
++ reg = <0x76>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio7>;
++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
++
++ port_b_a0 {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-B A0";
++ };
++ port_b_a1 {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-B A1";
++ };
++ port_a_a0 {
++ gpio-hog;
++ gpios = <2 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A A0";
++ };
++ port_a_a1 {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A A1";
++ };
++ /* pin 12 - CAM_CLK */
++ rpi_cam_io_1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO1";
++ };
++ /* pin 11 - CAM_GPIO - assume pwdn */
++ rpi_cam_io_0 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO0";
++ };
++ /* 0 - FPDLink output, 1 - LVDS output */
++ lvds_vs_fpdl {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "LVDS switch";
++ };
++ };
++
++ gpio_ext_77: pca9539@77 {
++ compatible = "nxp,pca9539";
++ reg = <0x77>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio5>;
++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
++
++ mpcie_wake {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "mPCIe WAKE#";
++ };
++ mpcie_wdisable {
++ gpio-hog;
++ gpios = <1 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "mPCIe W_DISABLE";
++ };
++ mpcie_clreq {
++ gpio-hog;
++ gpios = <2 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe CLKREQ#";
++ };
++ mpcie_ovc {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "mPCIe OVC";
++ };
++ };
++};
++
++&i2cswitch4 {
++ reg = <0x71>;
++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
++};
++
++&wlcore {
++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
+new file mode 100644
+index 0000000..39eab1f
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
+@@ -0,0 +1,1238 @@
++/*
++ * Device Tree Source for the M3ULCB Kingfisher board on r8a7796
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7796-m3ulcb.dts"
++
++/ {
++ model = "Renesas M3ULCB Kingfisher board based on r8a7796";
++
++ aliases {
++ serial1 = &hscif4;
++ };
++
++ snd_clk: snd_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <24576000>;
++ clock-output-names = "scki";
++ };
++
++ wlan_en: regulator@4 {
++ compatible = "regulator-fixed";
++ regulator-name = "wlan-en-regulator";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ vcc_sdhi3: regulator@41 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 Vcc";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vccq_sdhi3: regulator@5 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 VccQ";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ codec_en_reg: regulator@6 {
++ compatible = "regulator-fixed";
++ regulator-name = "codec-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 15 0>;
++
++ /* delay - CHECK */
++ startup-delay-us = <70000>;
++ enable-active-high;
++ };
++
++ amp_en_reg: regulator@7 {
++ compatible = "regulator-fixed";
++ regulator-name = "amp-en-regulator";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio_ext_20 0 0>;
++
++ startup-delay-us = <0>;
++ enable-active-high;
++ };
++
++ lvds_switch: regulator@8 {
++ compatible = "regulator-fixed";
++ regulator-name = "lvds_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio1 24 0>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ sdio_switch: regulator@9 {
++ compatible = "regulator-fixed";
++ regulator-name = "wifi_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_20 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ sound_switch: regulator@10 {
++ compatible = "regulator-fixed";
++ regulator-name = "pcm3168a_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_21 5 0>;
++ enable-active-low;
++ regulator-always-on;
++ };
++
++ radio_switch: regulator@11 {
++ compatible = "regulator-fixed";
++ regulator-name = "radio_on";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ kim {
++ compatible = "kim";
++ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */
++ /* serial1 */
++ dev_name = "/dev/ttySC1";
++ flow_cntrl = <1>;
++ /* int div 8 hscif@26.6666656MHz */
++ baud_rate = <3333332>;
++ };
++
++ btwilink {
++ compatible = "btwilink";
++ };
++
++ sound_ext: sound@0 {
++ pinctrl-0 = <&sound_0_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "left_j";
++ simple-audio-card,name = "pcm3168a";
++
++ simple-audio-card,bitclock-master = <&sound_ext_master>;
++ simple-audio-card,frame-master = <&sound_ext_master>;
++ sound_ext_master: simple-audio-card,cpu@0 {
++ sound-dai = <&rcar_sound 0>;
++ dai-tdm-slot-num = <8>;
++ dai-tdm-slot-width = <32>;
++ };
++
++ simple-audio-card,codec@0 {
++ sound-dai = <&pcm3168a>;
++ dai-tdm-slot-num = <8>;
++ dai-tdm-slot-width = <32>;
++ system-clock-frequency = <24576000>;
++ };
++ };
++
++ /delete-node/sound;
++
++ rsnd_ak4613: sound@1 {
++ pinctrl-0 = <&sound_1_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "left_j";
++ simple-audio-card,name = "ak4613";
++
++ simple-audio-card,bitclock-master = <&sndcpu>;
++ simple-audio-card,frame-master = <&sndcpu>;
++
++ sndcpu: simple-audio-card,cpu@1 {
++ sound-dai = <&rcar_sound 1>;
++ };
++
++ sndcodec: simple-audio-card,codec@1 {
++ sound-dai = <&ak4613>;
++ };
++ };
++
++ sound_radio: sound@2 {
++ pinctrl-0 = <&sound_2_pins>;
++ pinctrl-names = "default";
++ compatible = "simple-audio-card";
++
++ simple-audio-card,format = "i2s";
++ simple-audio-card,name = "radio";
++
++ simple-audio-card,bitclock-master = <&sound_radio_master>;
++ simple-audio-card,frame-master = <&sound_radio_master>;
++ simple-audio-card,cpu@2 {
++ sound-dai = <&rcar_sound 2>;
++ };
++
++ sound_radio_master: simple-audio-card,codec@2 {
++ sound-dai = <&radio>;
++ system-clock-frequency = <12288000>;
++ };
++ };
++
++ lvds-encoder {
++ compatible = "thine,thc63lvdm83d";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ port@0 {
++ reg = <0>;
++ lvds_enc_in: endpoint {
++ remote-endpoint = <&du_out_lvds0>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ lvds_enc_out: endpoint {
++ remote-endpoint = <&lvds_in>;
++ };
++ };
++ };
++ };
++
++ lvds {
++ compatible = "lvds-connector";
++
++ width-mm = <210>;
++ height-mm = <158>;
++
++ panel-timing {
++ /* 1280x800 @60Hz */
++ clock-frequency = <65000000>;
++ hactive = <1280>;
++ vactive = <800>;
++ hsync-len = <40>;
++ hfront-porch = <80>;
++ hback-porch = <40>;
++ vfront-porch = <14>;
++ vback-porch = <14>;
++ vsync-len = <4>;
++ };
++
++ port {
++ lvds_in: endpoint {
++ remote-endpoint = <&lvds_enc_out>;
++ };
++ };
++ };
++
++ radio: si468x@0 {
++ compatible = "si,si468x-pcm";
++ status = "okay";
++
++ #sound-dai-cells = <0>;
++ };
++};
++
++&pfc {
++ hscif4_pins: hscif4 {
++ groups = "hscif4_data_a", "hscif4_ctrl";
++ function = "hscif4";
++ };
++
++ sdhi3_pins_3v3: sd3_3v3 {
++ groups = "sdhi3_data4", "sdhi3_ctrl";
++ function = "sdhi3";
++ power-source = <3300>;
++ };
++
++ sound_0_pins: sound0 {
++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data";
++ function = "ssi";
++ };
++
++ sound_1_pins: sound1 {
++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
++ function = "ssi";
++ };
++
++ sound_2_pins: sound2 {
++ groups = "ssi6_ctrl", "ssi6_data";
++ function = "ssi";
++ };
++
++ usb0_pins: usb0 {
++ groups = "usb0";
++ function = "usb0";
++ };
++
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ can1_pins: can1 {
++ groups = "can1_data";
++ function = "can1";
++ };
++
++ canfd0_pins: canfd0 {
++ groups = "canfd0_data_a";
++ function = "canfd0";
++ };
++
++ canfd1_pins: canfd1 {
++ groups = "canfd1_data";
++ function = "canfd1";
++ };
++};
++
++&gpio0 {
++ video_a_irq {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-A irq";
++ };
++
++ video_b_irq {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-B irq";
++ };
++
++ gpioext_2_20_irq {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x20@i2c2 irq";
++ };
++};
++
++&gpio1 {
++ gpioext_2_21_irq {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x21@i2c2 irq";
++ };
++
++ wifi_irq {
++ gpio-hog;
++ gpios = <25 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "wifi irq";
++ };
++};
++
++&gpio5 {
++ touch_irq {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "touch irq";
++ };
++
++ /* From TI forum */
++ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */
++ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */
++ bt_strap {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "BT strap pin";
++ };
++};
++
++&gpio7 {
++ gpioext_2_21_irq {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "0x21@i2c4 irq";
++ };
++};
++
++&hscif4 {
++ pinctrl-0 = <&hscif4_pins>;
++ pinctrl-names = "default";
++ ctsrts;
++
++ status = "okay";
++};
++
++&i2c2 {
++ clock-frequency = <400000>;
++
++ gpio_ext_20: pca9535@20 {
++ compatible = "nxp,pca9535";
++ reg = <0x20>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio0>;
++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
++ };
++
++ gpio_ext_21: pca9535@21 {
++ compatible = "nxp,pca9535";
++ reg = <0x21>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio1>;
++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
++ };
++
++ i2cswitch2: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* BCM node(s) */
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* USB3.0 HUB node(s) */
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <2>;
++ /* Power amp node(s) */
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* Radio node(s) */
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++ /* A2B node(s) */
++ };
++
++ i2c@5 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <5>;
++ /* PCIe node(s) */
++ };
++
++ i2c@6 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <6>;
++ /* LVDS display node(s) */
++
++ polytouch: edt-ft5x06@38 {
++ compatible = "edt,edt-ft5x06";
++ reg = <0x38>;
++ interrupt-parent = <&gpio5>;
++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
++ };
++ };
++
++ i2c@7 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <7>;
++ /* Audio, GPS and Gyro node(s) */
++
++ pcm3168a: audio-codec@44 {
++ #sound-dai-cells = <0>;
++ compatible = "ti,pcm3168a";
++ reg = <0x44>;
++ clocks = <&snd_clk>;
++ clock-names = "scki";
++ tdm;
++ VDD1-supply = <&codec_en_reg>;
++ VDD2-supply = <&codec_en_reg>;
++ VCCAD1-supply = <&codec_en_reg>;
++ VCCAD2-supply = <&codec_en_reg>;
++ VCCDA1-supply = <&amp_en_reg>;
++ VCCDA2-supply = <&amp_en_reg>;
++ };
++
++ lsm9ds0_acc_mag@1d {
++ compatible = "st,lsm9ds0_acc_mag";
++ reg = <0x1d>;
++ };
++
++ lsm9ds0_gyr@6b {
++ compatible = "st,lsm9ds0-gyro";
++ reg = <0x6b>;
++ };
++
++ /* GPS@ 0x42 */
++ };
++ };
++};
++
++&i2c4 {
++ gpio_ext_22: pca9535@21 {
++ compatible = "nxp,pca9535";
++ reg = <0x22>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ interrupt-parent = <&gpio7>;
++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
++
++ /* pin 12 - CAM_CLK */
++ rpi_cam_io_1 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO1";
++ };
++ /* pin 11 - CAM_GPIO - assume pwdn */
++ rpi_cam_io_0 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "RaspB_IO0";
++ };
++ };
++
++ i2cswitch4: pca9548@74 {
++ compatible = "nxp,pca9548";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x74>;
++ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>;
++
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0>;
++ /* SAM node(s) */
++ };
++
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ /* Slot A (CN10) */
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ ov106xx_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ ov106xx_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ ov106xx_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ ov106xx_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ ov106xx_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ ov106xx_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@0 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti964_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti964_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ ti964_des0ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ ti964_des0ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ ti964_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@0 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <4>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti954_des0ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ ti954_des0ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ ti954_csi0ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2a */
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2a>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* MOST node(s) */
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++
++ rpi_camera: ov5647@36 {
++ compatible = "ovti,ov5647";
++ reg = <0x36>;
++
++ port@0 {
++ rpi_camera_in: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ };
++ };
++
++ i2c@5 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <5>;
++ /* CMOS camera node(s) */
++ };
++
++ i2c@7 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <7>;
++ /* Slot A (CN10) */
++
++ video_a_ext0: pca9535@26 {
++ compatible = "nxp,pca9535";
++ reg = <0x26>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR2";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ video_a_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A DES_SHDN";
++ };
++ video_a_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A led";
++ };
++ };
++
++ video_a_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_a_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg2";
++ };
++ video_a_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg1";
++ };
++ video_a_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-A cfg0";
++ };
++ video_a_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR_SHDN";
++ };
++ video_a_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR0";
++ };
++ video_a_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR1";
++ };
++ video_a_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-A PWR3";
++ };
++ };
++ };
++ };
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec0 {
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ vin0_ti964_des0ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep0>;
++ };
++ vin0_ti954_des0ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ vin1_ti964_des0ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep1>;
++ };
++ vin1_ti954_des0ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ vin2_ti964_des0ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ vin3_ti964_des0ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi20";
++ virtual,channel = <0>;
++ remote-endpoint = <&rpi_camera_in>;
++ data-lanes = <1 2>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&csi2_20 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "raw8";
++ receive,vc = <0>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_20_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ csi-rate = <280>;
++ };
++ };
++};
++
++&rcar_sound {
++ pinctrl-0 = <&sound_clk_pins>;
++
++ /* Multi DAI */
++ #sound-dai-cells = <1>;
++
++ rcar_sound,dai {
++ dai0 {
++ playback = <&ssi7>;
++ capture = <&ssi8>;
++ };
++
++ dai1 {
++ playback = <&ssi0 &src0 &dvc0>;
++ capture = <&ssi1 &src1 &dvc1>;
++ };
++
++ dai2 {
++ capture = <&ssi6>;
++ };
++ };
++};
++
++&sdhi3 {
++ pinctrl-0 = <&sdhi3_pins_3v3>;
++ pinctrl-names = "default";
++
++ vmmc-supply = <&wlan_en>;
++ vqmmc-supply = <&vccq_sdhi3>;
++ keep-power-in-suspend;
++ enable-sdio-wakeup;
++ bus-width = <4>;
++ no-1-8-v;
++ non-removable;
++ cap-power-off-card;
++ max-frequency = <26000000>;
++ status = "okay";
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ wlcore: wlcore@2 {
++ compatible = "ti,wl1837";
++ reg = <2>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
++ };
++};
++
++&usb2_phy0 {
++ pinctrl-0 = <&usb0_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hsusb {
++ status = "okay";
++};
++
++&ehci0 {
++ status = "okay";
++};
++
++&ohci0 {
++ status = "okay";
++};
++
++&xhci0 {
++ status = "okay";
++};
++
++&msiof1 {
++ status = "disabled";
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&can1 {
++ pinctrl-0 = <&can1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ renesas,can-clock-select = <0x0>;
++};
++
++&canfd {
++ pinctrl-0 = <&canfd0_pins &canfd1_pins>;
++ pinctrl-names = "default";
++ status = "disabled";
++
++ channel0 {
++ status = "okay";
++ };
++
++ channel1 {
++ status = "okay";
++ };
++};
++
++/* uncomment to enable CN47: SD on SDHI3 */
++//#include "ulcb-kf-sd3.dtsi"
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts
+new file mode 100644
+index 0000000..1ac0041
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts
+@@ -0,0 +1,287 @@
++/*
++ * Device Tree Source for the M3ULCB.View board on r8a7796
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ * Copyright (C) 2016-2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7796-m3ulcb.dts"
++
++/ {
++ model = "Renesas M3ULCB.View board based on r8a7796";
++};
++
++&i2c4 {
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des0ep3: endpoint {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x4c>;
++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++ maxim,i2c-quirk = <0x6c>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts
+new file mode 100644
+index 0000000..cc6866c
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts
+@@ -0,0 +1,318 @@
++/*
++ * Device Tree Source for the Salvator-X.View board
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ * Copyright (C) 2016-2017 Cogent Embedded, Inc
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7796-salvator-x.dts"
++
++/ {
++ model = "Renesas Salvator-X.View board based on r8a7796";
++};
++
++&pfc {
++ can0_pins: can0 {
++ groups = "can0_data_a";
++ function = "can0";
++ };
++
++ can1_pins: can1 {
++ groups = "can1_data";
++ function = "can1";
++ };
++};
++
++&i2c4 {
++ /delete-node/hdmi-in@34;
++ /delete-node/composite-in@70;
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des0ep3: endpoint {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x4c>;
++ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>;
++ maxim,sensor_delay = <0>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++ maxim,i2c-quirk = <0x6c>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++};
++
++&vin0 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++};
++
++&vin4 {
++ status = "disabled";
++};
++
++&vin5 {
++ status = "disabled";
++};
++
++&vin6 {
++ status = "disabled";
++};
++
++&vin7 {
++ status = "disabled";
++};
++
++&csi2_20 {
++ status = "disabled";
++ /delete-node/ports;
++};
++
++&csi2_40 {
++ /delete-node/ports;
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
++&can0 {
++ pinctrl-0 = <&can0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
++
++&can1 {
++ pinctrl-0 = <&can1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++};
+diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi
+new file mode 100644
+index 0000000..d3b4ece
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi
+@@ -0,0 +1,75 @@
++/*
++ * Device Tree Source for the H3ULCB Kingfisher board:
++ * this adding conflicting resource on VIN4 for Raspberry Pi camera
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++&i2cswitch4 {
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++
++ rpi_camera: ov5647@36 {
++ compatible = "ovti,ov5647";
++ reg = <0x36>;
++
++ port@0 {
++ rpi_camera_in: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ };
++ };
++};
++
++&vin4 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi20";
++ virtual,channel = <0>;
++ remote-endpoint = <&rpi_camera_in>;
++ data-lanes = <1 2>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ };
++};
++
++&csi2_20 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "raw8";
++ receive,vc = <0>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_20_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ csi-rate = <280>;
++ };
++ };
++};
+diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi
+new file mode 100644
+index 0000000..ef481d3
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi
+@@ -0,0 +1,33 @@
++/*
++ * Device Tree Source for the H3/M3ULCB Kingfisher board:
++ * this overrides WIFI in favour SD on SDHI3
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++&sdio_switch {
++ regulator-name = "sd_on";
++ enable-active-high;
++};
++
++&sdhi3 {
++ /delete-property/non-removable;
++ /delete-property/cap-power-off-card;
++ /delete-property/keep-power-in-suspend;
++ /delete-property/enable-sdio-wakeup;
++ /delete-property/sd-uhs-sdr104;
++
++ vmmc-supply = <&vcc_sdhi3>;
++ max-frequency = <46000000>;
++ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
++ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
++};
++
++&wlcore {
++ status = "disabled";
++};
+diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi
+new file mode 100644
+index 0000000..92ed4a4
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi
+@@ -0,0 +1,515 @@
++/*
++ * Device Tree Source for the H3ULCB Videobox board:
++ * this adding conflicting resource on VIN4/VIN5/VIN6/VIN7 for CN12
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++&i2cswitch2 {
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <3>;
++ /* Slot C (CN12) */
++
++ ov106xx@8 {
++ compatible = "ovti,ov106xx";
++ reg = <0x68>;
++
++ port@0 {
++ ov106xx_in8: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ remote-endpoint = <&vin4ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des2ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des2ep0>;
++ };
++ ov106xx_ti964_des2ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des2ep0>;
++ };
++ ov106xx_ti954_des2ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des2ep0>;
++ };
++ };
++ };
++
++ ov106xx@9 {
++ compatible = "ovti,ov106xx";
++ reg = <0x69>;
++
++ port@0 {
++ ov106xx_in9: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ remote-endpoint = <&vin5ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des2ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des2ep1>;
++ };
++ ov106xx_ti964_des2ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des2ep1>;
++ };
++ ov106xx_ti954_des2ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des2ep1>;
++ };
++ };
++ };
++
++ ov106xx@10 {
++ compatible = "ovti,ov106xx";
++ reg = <0x6a>;
++
++ port@0 {
++ ov106xx_in10: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ remote-endpoint = <&vin6ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des2ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des2ep2>;
++ };
++ ov106xx_ti964_des2ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des2ep2>;
++ };
++ };
++ };
++
++ ov106xx@11 {
++ compatible = "ovti,ov106xx";
++ reg = <0x6b>;
++
++ port@0 {
++ ov106xx_in11: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ remote-endpoint = <&vin7ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des2ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des2ep3>;
++ };
++ ov106xx_ti964_des2ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des2ep3>;
++ };
++ };
++ };
++
++ /* DS90UB964 @ 0x3a */
++ ti964-ti9x3@2 {
++ compatible = "ti,ti964-ti9x3";
++ reg = <0x3a>;
++ ti,sensor_delay = <350>;
++ ti,links = <4>;
++ ti,lanes = <2>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti964_des2ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in8>;
++ };
++ ti964_des2ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in9>;
++ };
++ ti964_des2ep2: endpoint@2 {
++ ti9x3-addr = <0x0e>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in10>;
++ };
++ ti964_des2ep3: endpoint@3 {
++ ti9x3-addr = <0x0f>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in11>;
++ };
++ };
++ port@1 {
++ ti964_csi1ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ };
++
++ /* DS90UB954 @ 0x38 */
++ ti954-ti9x3@2 {
++ compatible = "ti,ti954-ti9x3";
++ reg = <0x38>;
++ /* gpios = <&video_c_ext1 10 GPIO_ACTIVE_HIGH>; */
++ ti,sensor_delay = <350>;
++ ti,links = <2>;
++ ti,lanes = <2>;
++ ti,forwarding-mode = "round-robin";
++ ti,cable-mode = "coax";
++
++ port@0 {
++ ti954_des2ep0: endpoint@0 {
++ ti9x3-addr = <0x0c>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in8>;
++ };
++ ti954_des2ep1: endpoint@1 {
++ ti9x3-addr = <0x0d>;
++ dvp-order = <0>;
++ remote-endpoint = <&ov106xx_in9>;
++ };
++ };
++ port@1 {
++ ti954_csi1ep0: endpoint {
++ csi-rate = <1450>;
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ };
++
++ /* MAX9286 @ 0x2c */
++ max9286-max9271@2 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x2c>;
++ maxim,sensor_delay = <350>;
++ maxim,links = <4>;
++ maxim,lanes = <2>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des2ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in8>;
++ };
++ max9286_des2ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in9>;
++ };
++ max9286_des2ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in10>;
++ };
++ max9286_des2ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in11>;
++ };
++ };
++ port@1 {
++ max9286_csi1ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ };
++ };
++
++ i2c@4 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4>;
++ /* Slot C (CN12) */
++
++ video_c_ext0: pca9535@26 {
++ compatible = "nxp,pca9535";
++ reg = <0x26>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_c_des_cfg1 {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-C cfg1";
++ };
++ video_c_des_cfg0 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-C cfg0";
++ };
++ video_c_pwr_shdn {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR_SHDN";
++ };
++ video_c_cam_pwr0 {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR0";
++ };
++ video_c_cam_pwr1 {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR1";
++ };
++ video_c_cam_pwr2 {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR2";
++ };
++ video_c_cam_pwr3 {
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR3";
++ };
++ video_c_des_shdn {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C DES_SHDN";
++ };
++ video_c_des_led {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-C led";
++ };
++ };
++
++ video_c_ext1: max7325@5c {
++ compatible = "maxim,max7325";
++ reg = <0x5c>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ video_c_des_cfg2 {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-C cfg2";
++ };
++ video_c_des_cfg1 {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-C cfg1";
++ };
++ video_c_des_cfg0 {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "Video-C cfg0";
++ };
++ video_c_pwr_shdn {
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR_SHDN";
++ };
++ video_c_cam_pwr0 {
++ gpio-hog;
++ gpios = <8 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR0";
++ };
++ video_c_cam_pwr1 {
++ gpio-hog;
++ gpios = <9 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR1";
++ };
++ video_c_cam_pwr2 {
++ gpio-hog;
++ gpios = <10 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR2";
++ };
++ video_c_cam_pwr3 {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C PWR3";
++ };
++ video_c_des_shdn {
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "Video-C DES_SHDN";
++ };
++ video_c_led {
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "Video-C LED";
++ };
++ };
++ };
++};
++
++&vin4 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin4ep0: endpoint {
++ csi,select = "csi20";
++ virtual,channel = <0>;
++ remote-endpoint = <&ov106xx_in8>;
++ data-lanes = <1 2>;
++ };
++ };
++ port@1 {
++ csi2ep0: endpoint {
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ port@2 {
++ vin4_max9286_des2ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des2ep0>;
++ };
++ vin4_ti964_des2ep0: endpoint@1 {
++ remote-endpoint = <&ti964_des2ep0>;
++ };
++ vin4_ti954_des2ep0: endpoint@2 {
++ remote-endpoint = <&ti954_des2ep0>;
++ };
++ };
++ };
++};
++
++&vin5 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin5ep0: endpoint@0 {
++ csi,select = "csi20";
++ virtual,channel = <1>;
++ remote-endpoint = <&ov106xx_in9>;
++ data-lanes = <1 2>;
++ };
++ };
++ port@1 {
++ csi2ep1: endpoint {
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ port@2 {
++ vin5_max9286_des2ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des2ep1>;
++ };
++ vin5_ti964_des2ep1: endpoint@1 {
++ remote-endpoint = <&ti964_des2ep1>;
++ };
++ vin5_ti954_des2ep1: endpoint@2 {
++ remote-endpoint = <&ti954_des2ep1>;
++ };
++ };
++ };
++};
++
++&vin6 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin6ep0: endpoint@0 {
++ csi,select = "csi20";
++ virtual,channel = <2>;
++ remote-endpoint = <&ov106xx_in10>;
++ data-lanes = <1 2>;
++ };
++ };
++ port@1 {
++ csi2ep2: endpoint {
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ port@2 {
++ vin6_max9286_des2ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des2ep2>;
++ };
++ vin6_ti964_des2ep2: endpoint@1 {
++ remote-endpoint = <&ti964_des2ep2>;
++ };
++ };
++ };
++};
++
++&vin7 {
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin7ep0: endpoint@0 {
++ csi,select = "csi20";
++ virtual,channel = <3>;
++ remote-endpoint = <&ov106xx_in11>;
++ data-lanes = <1 2>;
++ };
++ };
++ port@1 {
++ csi2ep3: endpoint {
++ remote-endpoint = <&csi2_20_ep>;
++ };
++ };
++ port@2 {
++ vin7_max9286_des2ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des2ep3>;
++ };
++ vin7_ti964_des2ep3: endpoint@1 {
++ remote-endpoint = <&ti964_des2ep3>;
++ };
++ };
++ };
++};
++
++&csi2_20 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_20_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2>;
++ csi-rate = <300>;
++ };
++ };
++};
+--
+1.9.1
+