Age | Commit message (Collapse) | Author | Files | Lines |
|
This modifies sample configurations for the following updates:
- Set fixed variables of Reproducible Builds [1] to keep the timestamp
changes according to build time, it is convenience to check logs during
the development phase.
- Remove ptest from DISTRO_FEATURES according to YP3.1 release
recommendation for Known Issues [2]. It is to save a significant
amount of build time.
[1]:
https://wiki.yoctoproject.org/wiki/Reproducible_Builds
[2]:
https://lists.yoctoproject.org/g/yocto-announce/message/186
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
Change-Id: If73df652f19ca33c073cf1a462d4fb84eefbc172
|
|
This commit does the following changes:
- Re-create sample configurations based on YP3.0 official release.
- Update BBMASK variable for dropping meta-linaro.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
Change-Id: Ib806fdf694e709053a555c26b06a28b9f7825072
|
|
This commit updates sample build configurations according to the
template from Yocto Project Zeus.
It also does the following changes:
- Removed a deprecated fix in GFX configurations
(from commit f5b7f9a6142a2f60c78fa54e7e368164ec583282).
- Updated PREFERRED_PROVIDER of libgbm according to recipe update.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
Change-Id: Iabae1daae7f5afd632b61f20b38656ddbff36d4f
|
|
This commit enables PAM distro feature for BSP minimal configurations,
its target is to support LTP test on core-image-minimal.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
IPL and U-boot were built all binaries of H3 DRAM configurations at one
time. Hence, H3_OPTION was not used anymore.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
From Yv3.7.0, there are 03 options to build u-boot/IPL for H3:
- For R-Car H3 SiP DDR 8GiB (2GiB x 4ch) [1]
- For R-Car H3 SiP DDR 4GiB (2GiB x 2ch) [2]
- For R-Car H3 SiP DDR 4GiB (1GiB x 4ch) [3]
This commit adds a variable into sample configurations to control the
build option:
- For [1]: H3_OPTION = "1" (default)
- For [2]: H3_OPTION = "2"
- For [3]: H3_OPTION = "0"
It also adds H3_OPTION = "0" for H3ULCB by default.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates configurations to adapt to YP v2.4.2.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit supports enabling USB 3.0 for Salvator-X board.
To enable it, please uncomment MACHINE_FEATURES_append = " usb3"
in local.conf.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit supports enabling CAS features for R-Car Gen3.
To enable it, please uncomment MACHINE_FEATURES_append = " cas"
in local.conf.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies sample configurations for Salvator-X and ULCB
to build with YP2.4 rocko.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SOC_FAMILY for M3N to build with supported
environments (MMP, GFX, BSP).
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Renesas BSP v3.5.1 (kernel v4.9 stable)
[Environment]
poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3)
meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e
meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f
[Information]
- U-boot: Changed load address from H'49000000 to H'50000000
- XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0"
- Change location of include directory, which stores common user header
files, to $(INCSHARED)
- In BSP Only, core-image-weston is not supported even though
local-wayland.conf is provided.
- Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is
 necessary to enable BKUP_TRG signal for Suspend to RAM.
- The dtb filename was changed in R-Car H3. Only
"Image-r8a7795-es1-salvator-x.dtb" is supported in this version.
Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3
WS1.0 and WS1.1.
- Please update your local.conf and bblayers.conf corresponding to Yocto
v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for
updated contents.
- You have to re-compile out-of-recipe software like user application by
v2.16.0 SDK toolchains.
- In some boards, the resuming from System Suspend to RAM may cause
unstable operation or failed to resume.
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|