aboutsummaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3/recipes-bsp/u-boot
AgeCommit message (Collapse)AuthorFilesLines
2020-05-04rcar-gen3: Switch to python3Khang Nguyen1-1/+1
This updates recipes to use Python3 instead of Python2 which is deprecated in Yocto. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> Change-Id: Id2594e5bb0e0003b22af8d183bef340587a9c1aa
2019-07-15rcar-gen3: u-boot: Update U-Boot version to 3.9.5Duy Dang1-2/+2
This commit updates U-Boot version to 3.9.5 for the following changes: - Fix name to AVB_AVTP_{MATCH/CAPTURE}. - Add DRAM 2x4G memory map support for M3 Ver.3.0 SiP. Change-Id: Ic1ad4f8fd0eec13bb872b5d17bb2742ab59b3ae3 Signed-off-by: Duy Dang <duy.dang.yw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2019-04-02rcar-gen3: u-boot: Update to version 3.9.3Duy Dang1-2/+2
This commit updates U-Boot SRCREV to Ver.3.9.3 for the following changes: - Increase off-on delay on the SD Vcc regulator. - Fix r8a779{5,6,90} DRIF conflict names by H/W UM 1.50 errata. - Apply upstream code related to mmc. - Add upstream description to DT files added by BSP. - Fix warning in writel() overflow in rcar_i2c.c. - Set environment variable containing CPU type. - Downgrade SD/MMC from UHS/HS200/HS400 modes before boot. - Unmount FS in do_fs_type(). - Support up to MMC HS200 mode with U-Boot. - Add DMA transfer address alignment check at writing. - Fix pinctrl definition according to H/W UM Rev.1.00 and errata. - Force mmc reinit when no card present. - Make DMA transfer end bit configurable and add 1uS delay after DMA completion on older IPs. - Add function to activate with suitable DT and add Enable MULTI_DTB_FIT. Change-Id: I958f86c16e7558ac51b40e68f611b7f20748877c Signed-off-by: Duy Dang <duy.dang.yw@renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-12-20rcar-gen3: u-boot: Drop SoC name in srec filesKhang Nguyen1-0/+1
This commit updates do_deploy function to drop the SoC name when deploying srec files, the purpose is to keep the legacy name of U-Boot build results. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-12-20rcar-gen3: u-boot: Update SRCREV to version 3.9.1Duy Dang1-2/+2
This commit updates SRCREV of U-Boot to version 3.9.1 for the following changes: - Generate fitting memory map on R-Car Gen3, fix protection area access error and fix to enable icache early in R-Car Gen3. - Add module clock stop before OS startup. - Reorder TMIO clock handling. - Do not issue CMD 6 on SD 1.00 and SD 1.01. - Fix protection area access error at Cortex-A53. - Avoid unsupported internal delay mode for R-Car E3 and limit to 100Mbps. - Revert "net: Fix cache misalignment message after network load operations" - Add "usb_pgood_delay" to the default environment variable. - Fix warning of the make W=1 C=2. - Resolve the problem that the eMMC read of the environment setting value may fail at startup. - Add vbus-supply regulator support. - Resolve the problem that the SD card (UHS, etc.) isn’t recognized. - Fix MOD_SEL bit numbering for R-Car E3. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xv@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Support deploying multiple u-boot binariesKhang Nguyen1-12/+27
This commit updates recipes to support deploying multiple u-boot binaries of Salvator-XS, H3ULCB and Ebisu boards. It also removed uboot-control.inc which is no longer used. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Update u-boot according to BSP v3.8.0Khang Nguyen2-6/+23
This commit updates u-boot according to BSP v3.8.0. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Backport u-boot v2018.09 upstreamKhang Nguyen5-36/+329
This commit backports u-boot v2018.09 upstream to Yv3.13.0. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-19rcar-gen3: u-boot: Remove -fgnu89-inline flag from KCFLAGSDuy Dang1-2/+0
In the past, -fgnu89-inline flag was added to fix some incompatibilities with GCC 5. At the moment, the issue is resolved after upgrading to GCC 7.3. This commit removes -fgnu89-inline flag from KCFLAGS. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-19rcar-gen3: u-boot: Update SRCREV to follow the latest versionKhang Nguyen1-2/+2
This commit updates u-boot SRCREV to follow the latest version for following updates: - Remove MSTP initial setting value definition. - Increase console buffer sizes. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-06-18rcar-gen3: u-boot: Upgrade u-boot according to Linux BSP v3.7.0Khang Nguyen1-2/+2
This commit upgrades u-boot version corresponding to BSP v3.7.0 for below fix: - Fix R-Car M3 version display from Ver.1.1 to Ver.1.1/Ver.1.2. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-04-21rcar-gen3: u-boot: Update SRCREV to follow the latest versionThuy Tran1-2/+6
This commit updates u-boot SRCREV to follow the latest version for following updates: - Fix XTAL clock for Salvator-XS board. - Use packed structures for networking. As a result, “dcache off” command works fine. It also adds u-boot build options to support each H3 device trees as below: - For R-Car H3 SiP DDR 8GiB (2GiB x 4ch), specify RCAR_DRAM_MAP4_2. - For R-Car H3 SiP DDR 4GiB (2GiB x 2ch), specify RCAR_DRAM_MAP2_2. - For R-Car H3 SiP DDR 4GiB (1GiB x 4ch), specify RCAR_DRAM_MAP4_1. In Yv3.7.0, we will support R-Car H3 SiP DDR 8GiB by default. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: u-boot: Update SRCREV to follow the latest versionKhang Nguyen1-2/+2
This commit updates u-boot SRCREV for following changes: - Add I2C setting for reset by PMIC for E3. - Add reset command support by using PMIC for E3. - Fix pinmux_config_regs array for E3. - Add clock stops before boot os for E3. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: u-boot: Upgrade version to v3.6.0 and adapt to rocko u-boot headersThuy Tran2-5/+12
This commit updates u-boot version corresponding to BSP v3.6.0 for below fixes: - Add CONFIG_CMD_CACHE for enabling cache control commands. - Fix clock bit assignment of EHCI3. - Store last address/size/etc as ulong. - Build warning fixes for 64-bit. - Add CONFIG_HUSH_PARSER for enabling the "hush" shell as command line interpreter. - Add eMMC ver.5.1 support. - Update MMC_ERASE argument to match Linux kernel. - Backport for gcc 7.2.0 compiler support. The u-boot.inc used by the bb recipe has been split into two parts in the pyro poky meta. Adopt to the new style by providing the missing u-boot-common*.inc file containing the license information. Signed-off-by: Stephen Lawrence <stephen.lawrence@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-11-24rcar-gen3: u-boot: Upgrade version according to Linux BSP to v3.5.9Thuy Tran1-2/+2
This commit updates u-boot according to Linux BSP v3.5.9 for supporting R-Car M3N Ver.1.0 and updating following items: - Add missing IPSR18 bits to R8A7795 PFC. - Fix unnecessary write "bus_width=1" for SDHI. U-boot config for M3N is r8a77965_salvator-x_defconfig. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: u-boot: Upgrade version according to Linux BSP to v3.5.6Thao Nguyen1-2/+2
This commit updates u-boot according to Linux BSP v3.5.6 for below fixes: - Fix u-boot reset for ULCB. - The SMSTPCR value is illegal immediately before the start of the kernel. - The following fatls command execution of usb start/stop Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: u-boot: Update u-boot to v3.5.4Thao Nguyen1-2/+2
This commit updates u-boot to BSP v3.5.4 for following changes: - Remove MSTP registers values rewriting process. - Fix multiple declarations of DECLARE_GLOBAL_DATA_PTR. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: u-boot: Upgrade u-boot to v3.5.3Thao Nguyen1-2/+2
This commit updates u-boot version corresponding to BSP v3.5.3 for following items: - Add workaround for PRR register of R-Car M3 WS1.1. (Fix printing cpu info.) - Fix USB2.0 ch2 found device for R-Car H3 WS2.0. - Revert "armv8: Add ISB after cpacr_el1 update" for I/D cache ON. Change-Id: I952aabfeec8b8518760494ba987f2cdd045b6f66 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-03-23rcar-gen3: u-boot: upgrade BSP v3.5.0 -> v3.5.2Thao Nguyen1-2/+2
This patch upgrade BSP v3.5.0 -> v3.5.2. [v3.5.2] - Fix Ethernet driver and could turn on I/D cache. Change-Id: Ic90b59ea4db549248b263eedd4fd40c865f74408 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-01-27First commit.Renesas-Yocto-v2.16.0Takamitsu Honda1-0/+27
Renesas BSP v3.5.1 (kernel v4.9 stable) [Environment] poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3) meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f [Information] - U-boot: Changed load address from H'49000000 to H'50000000 - XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0" - Change location of include directory, which stores common user header files, to $(INCSHARED) - In BSP Only, core-image-weston is not supported even though local-wayland.conf is provided. - Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is  necessary to enable BKUP_TRG signal for Suspend to RAM. - The dtb filename was changed in R-Car H3. Only "Image-r8a7795-es1-salvator-x.dtb" is supported in this version. Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3 WS1.0 and WS1.1. - Please update your local.conf and bblayers.conf corresponding to Yocto v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for updated contents. - You have to re-compile out-of-recipe software like user application by v2.16.0 SDK toolchains. - In some boards, the resuming from System Suspend to RAM may cause unstable operation or failed to resume. Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>