diff options
Diffstat (limited to 'autobuild')
| -rwxr-xr-x | autobuild/agl/autobuild | 134 | ||||
| -rwxr-xr-x | autobuild/linux/autobuild | 119 |
2 files changed, 210 insertions, 43 deletions
diff --git a/autobuild/agl/autobuild b/autobuild/agl/autobuild index 883293d..16181b8 100755 --- a/autobuild/agl/autobuild +++ b/autobuild/agl/autobuild @@ -1,22 +1,128 @@ -#!/bin/bash +#!/usr/bin/make -f +# Copyright (C) 2015 - 2018 "IoT.bzh" +# Copyright (C) 2020 Konsulko Group +# Author "Romain Forlot" <romain.forlot@iot.bzh> +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. -SOURCE_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )/../../../" -BUILD_DIR=$( echo "$2" | cut -d'=' -f2 ) +THISFILE := $(lastword $(MAKEFILE_LIST)) +ROOT_DIR := $(abspath $(dir $(THISFILE))/../..) -# HACK: alias should be expanded in script for cmake to work properly -shopt -s expand_aliases -# HACK: source again the SDK because of the alias -source $SDKTARGETSYSROOT/../../environment-setup-* +# Build directories +# Note that the debug/test/coverage directories are defined in relation +# to the release directory (BUILD_DIR), this needs to be kept in mind +# if over-riding it and building those widget types, the specific widget +# type variable (e.g. BUILD_DIR_DEBUG) may also need to be specified +# to yield the desired output hierarchy. +BUILD_DIR = $(ROOT_DIR)/build +BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug) +BUILD_DIR_TEST = $(abspath $(BUILD_DIR)/../build-test) +BUILD_DIR_COVERAGE = $(abspath $(BUILD_DIR)/../build-coverage) -pushd $BUILD_DIR +# Output directory variable for use in pattern rules. +# This is intended for internal use only, hence the explicit override +# definition. +override OUTPUT_DIR = $(BUILD_DIR) - cmake $SOURCE_DIR - make +# Final install directory for widgets +DEST = $(OUTPUT_DIR) - if [ "$1" == "package" ]; then - make widget - cp *.wgt package/ +# Default build type for release/test builds +BUILD_TYPE = RELEASE + +.PHONY: all help update install distclean +.PHONY: clean clean-release clean-debug clean-test clean-coverage clean-all +.PHONY: configure configure-release configure-debug configure-test configure-coverage +.PHONY: build build-release build-debug build-test build-coverage build-all +.PHONY: package package-release package-debug package-test package-coverage package-all + +help: + @echo "List of targets available:" + @echo "" + @echo "- all" + @echo "- help" + @echo "- clean" + @echo "- distclean" + @echo "- configure" + @echo "- build: compilation, link and prepare files for package into a widget" + @echo "- package: output a widget file '*.wgt'" + @echo "- install: install in your $(CMAKE_INSTALL_DIR) directory" + @echo "" + @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" + @echo "Don't use your build dir as DEST as wgt file is generated at this location" + +all: package-all + +# Target specific variable over-rides so static pattern rules can be +# used for the various type-specific targets. + +configure-test build-test package-test clean-test: OUTPUT_DIR = $(BUILD_DIR_TEST) + +configure-coverage build-coverage package-coverage clean-coverage: OUTPUT_DIR = $(BUILD_DIR_COVERAGE) +configure-coverage build-coverage package-coverage: BUILD_TYPE = COVERAGE + +configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG) +configure-debug build-debug package-debug: BUILD_TYPE = DEBUG + +clean-release clean-test clean-debug clean-coverage: + @if [ -d $(OUTPUT_DIR) ]; then \ + $(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \ + else \ + echo Nothing to clean; \ + fi + +clean: clean-release + +clean-all: clean-release clean-test clean-debug clean-coverage + +distclean: clean-all + +configure-release configure-test configure-debug configure-coverage: + @mkdir -p $(OUTPUT_DIR) + @if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \ + (cd $(OUTPUT_DIR) && cmake -S $(ROOT_DIR) -DCMAKE_BUILD_TYPE=$(BUILD_TYPE) $(CONFIGURE_ARGS)); \ + fi + +configure: configure-release + +build-release build-debug build-coverage: build-%: configure-% + @cmake --build $(OUTPUT_DIR) $(BUILD_ARGS) --target all + +# Kept for consistency, empty to avoid building everything for test widget +build-test: configure-test + +build: build-release + +build-all: build-release build-debug build-test build-coverage + +package-release package-debug package-coverage: package-%: build-% + @cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target widget + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ + fi + +package-test: build-test + @cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target test_widget + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ fi -popd +package: package-release + +package-all: package-release package-test package-coverage package-debug + +update: configure + @cmake --build $(BUILD_DIR) --target autobuild +install: build + @cmake --build $(BUILD_DIR) $(INSTALL_ARGS) --target install diff --git a/autobuild/linux/autobuild b/autobuild/linux/autobuild index 035db15..16181b8 100755 --- a/autobuild/linux/autobuild +++ b/autobuild/linux/autobuild @@ -1,5 +1,6 @@ #!/usr/bin/make -f -# Copyright (C) 2015, 2016 "IoT.bzh" +# Copyright (C) 2015 - 2018 "IoT.bzh" +# Copyright (C) 2020 Konsulko Group # Author "Romain Forlot" <romain.forlot@iot.bzh> # # Licensed under the Apache License, Version 2.0 (the "License"); @@ -15,53 +16,113 @@ # limitations under the License. THISFILE := $(lastword $(MAKEFILE_LIST)) -BUILD_DIR := $(abspath $(dir $(THISFILE))/../../build) -DEST := ${BUILD_DIR}/target +ROOT_DIR := $(abspath $(dir $(THISFILE))/../..) -.PHONY: all clean distclean configure build package help update +# Build directories +# Note that the debug/test/coverage directories are defined in relation +# to the release directory (BUILD_DIR), this needs to be kept in mind +# if over-riding it and building those widget types, the specific widget +# type variable (e.g. BUILD_DIR_DEBUG) may also need to be specified +# to yield the desired output hierarchy. +BUILD_DIR = $(ROOT_DIR)/build +BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug) +BUILD_DIR_TEST = $(abspath $(BUILD_DIR)/../build-test) +BUILD_DIR_COVERAGE = $(abspath $(BUILD_DIR)/../build-coverage) -all: help +# Output directory variable for use in pattern rules. +# This is intended for internal use only, hence the explicit override +# definition. +override OUTPUT_DIR = $(BUILD_DIR) + +# Final install directory for widgets +DEST = $(OUTPUT_DIR) + +# Default build type for release/test builds +BUILD_TYPE = RELEASE + +.PHONY: all help update install distclean +.PHONY: clean clean-release clean-debug clean-test clean-coverage clean-all +.PHONY: configure configure-release configure-debug configure-test configure-coverage +.PHONY: build build-release build-debug build-test build-coverage build-all +.PHONY: package package-release package-debug package-test package-coverage package-all help: @echo "List of targets available:" @echo "" @echo "- all" + @echo "- help" @echo "- clean" @echo "- distclean" @echo "- configure" @echo "- build: compilation, link and prepare files for package into a widget" @echo "- package: output a widget file '*.wgt'" - @echo "- install: install in your ${CMAKE_INSTALL_DIR} directory" + @echo "- install: install in your $(CMAKE_INSTALL_DIR) directory" @echo "" - @echo "Usage: ./conf.d/autobuild/agl/autobuild package DEST=${HOME}/opt" + @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" @echo "Don't use your build dir as DEST as wgt file is generated at this location" -update: configure - @cmake --build ${BUILD_DIR} --target autobuild +all: package-all -clean: - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} clean) || echo Nothing to clean +# Target specific variable over-rides so static pattern rules can be +# used for the various type-specific targets. -distclean: - @rm -rf ${BUILD_DIR} +configure-test build-test package-test clean-test: OUTPUT_DIR = $(BUILD_DIR_TEST) -configure: ${BUILD_DIR}/Makefile +configure-coverage build-coverage package-coverage clean-coverage: OUTPUT_DIR = $(BUILD_DIR_COVERAGE) +configure-coverage build-coverage package-coverage: BUILD_TYPE = COVERAGE -build: configure - @cmake --build ${BUILD_DIR} ${BUILD_ARGS} --target all +configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG) +configure-debug build-debug package-debug: BUILD_TYPE = DEBUG -package: build - @mkdir -p ${BUILD_DIR}/$@/bin - @mkdir -p ${BUILD_DIR}/$@/etc - @mkdir -p ${BUILD_DIR}/$@/lib - @mkdir -p ${BUILD_DIR}/$@/htdocs - @mkdir -p ${BUILD_DIR}/$@/data - @cmake --build ${BUILD_DIR} --target widget - @mkdir -p ${DEST} && cp ${BUILD_DIR}/*wgt ${DEST} +clean-release clean-test clean-debug clean-coverage: + @if [ -d $(OUTPUT_DIR) ]; then \ + $(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \ + else \ + echo Nothing to clean; \ + fi -install: build - @cmake --build ${BUILD_DIR} --target install +clean: clean-release + +clean-all: clean-release clean-test clean-debug clean-coverage + +distclean: clean-all + +configure-release configure-test configure-debug configure-coverage: + @mkdir -p $(OUTPUT_DIR) + @if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \ + (cd $(OUTPUT_DIR) && cmake -S $(ROOT_DIR) -DCMAKE_BUILD_TYPE=$(BUILD_TYPE) $(CONFIGURE_ARGS)); \ + fi + +configure: configure-release + +build-release build-debug build-coverage: build-%: configure-% + @cmake --build $(OUTPUT_DIR) $(BUILD_ARGS) --target all -${BUILD_DIR}/Makefile: - @[ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR} - @[ -f ${BUILD_DIR}/Makefile ] || (cd ${BUILD_DIR} && cmake ${CONFIGURE_ARGS} ..) +# Kept for consistency, empty to avoid building everything for test widget +build-test: configure-test + +build: build-release + +build-all: build-release build-debug build-test build-coverage + +package-release package-debug package-coverage: package-%: build-% + @cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target widget + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ + fi + +package-test: build-test + @cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target test_widget + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ + fi + +package: package-release + +package-all: package-release package-test package-coverage package-debug + +update: configure + @cmake --build $(BUILD_DIR) --target autobuild + +install: build + @cmake --build $(BUILD_DIR) $(INSTALL_ARGS) --target install |