diff options
| author |   mgiannikouris <mgiannikouris@crosschasm.com> | 2015-09-14 21:05:55 -0400 |
|---|---|---|
| committer | mgiannikouris <mgiannikouris@crosschasm.com> | 2015-09-14 21:05:55 -0400 |
| commit | 0b778b66400f67417672dd1849f5b90daa32d8a6 (patch) | |
| tree | e6e3ee4f6630fe0d15096a06979b7b4b9555c964 /JSON.mkd | |
| parent | 9a4e51989710fc718271981dd29c58c167c80758 (diff) | |
More JSON.mkd
Diffstat (limited to 'JSON.mkd')
| -rw-r--r-- | JSON.mkd | 4 |
1 files changed, 2 insertions, 2 deletions
@@ -368,7 +368,7 @@ the "Signals Defined from Diagnostic Messages" section below. **Response** -f the predefined requests were enabled or disabled successfully, the `status` in +If the predefined requests were enabled or disabled successfully, the `status` in the response will be `true`. { "command_response": "predefined_obd2", "status": true} @@ -377,7 +377,7 @@ the response will be `true`. The ModemConfigurationCommand message allows users to change certain aspects of modem operation on-the-fly (at runtime). The modem configuration settings are stored in flash memory and are untouched by the bootloader during a software update (assuming the correct cellular_c5 linker file is used during compilation of vi-firmware). Thus, new modem settings persistent across power cycles. -The ModemConfigurationCommand message provides three sub-messages for particular groups of modem settings. These are NetworkOperatorSettings, NetworkDataSettings, and ServerConnectSettings. These configuration messages are described in great detail within the cellular_c5_config documentation. +The ModemConfigurationCommand message provides three sub-messages for particular groups of modem settings. These are NetworkOperatorSettings, NetworkDataSettings, and ServerConnectSettings. These configuration messages are described in great detail within the [cellular_c5_config](vi-firmware/docs/advanced/cellular_c5_config.mkd) documentation. Currently, only the ServerConnectSettings sub-message is supported in the vi-firmware's command interpreter. All other settings are currently compile-time only. |