path: root/src/app.cpp

/*
 * Copyright (c) 2017 TOYOTA MOTOR CORPORATION
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "app.hpp"
#include "json_helper.hpp"
#include "layers.hpp"
#include "layout.hpp"
#include "util.hpp"
#include "wayland_ivi_wm.hpp"

#include <cstdio>
#include <memory>

#include <cassert>

#include <json-c/json.h>

#include <algorithm>
#include <csignal>
#include <fstream>
#include <json.hpp>
#include <regex>
#include <thread>

#include "wm_client.hpp"
#include "applist.hpp"

extern "C"
{
#include <systemd/sd-event.h>
}

namespace wm
{

const unsigned kTimeOut = 10000000UL; /* 10s */

/* DrawingArea name used by "{layout}.{area}" */
const char kNameLayoutNormal[] = "normal";
const char kNameLayoutSplit[] = "split";
const char kNameAreaFull[] = "full";
const char kNameAreaMain[] = "main";
const char kNameAreaSub[] = "sub";

/* Key for json obejct */
const char kKeyDrawingName[] = "drawing_name";
const char kKeyDrawingArea[] = "drawing_area";
const char kKeyDrawingRect[] = "drawing_rect";
const char kKeyX[] = "x";
const char kKeyY[] = "y";
const char kKeyWidth[] = "width";
const char kKeyHeight[] = "height";
const char kKeyWidthPixel[] = "width_pixel";
const char kKeyHeightPixel[] = "height_pixel";
const char kKeyWidthMm[] = "width_mm";
const char kKeyHeightMm[] = "height_mm";

static sd_event_source *g_timer_ev_src = nullptr;

static AppList g_app_list;

namespace
{

using nlohmann::json;

result<json> file_to_json(char const *filename)
{
    json j;
    std::ifstream i(filename);
    if (i.fail())
    {
        HMI_DEBUG("wm", "Could not open config file, so use default layer information");
        j = default_layers_json;
    }
    else
    {
        i >> j;
    }

    return Ok(j);
}

struct result<layer_map> load_layer_map(char const *filename)
{
    HMI_DEBUG("wm", "loading IDs from %s", filename);

    auto j = file_to_json(filename);
    if (j.is_err())
    {
        return Err<layer_map>(j.unwrap_err());
    }
    json jids = j.unwrap();

    return to_layer_map(jids);
}

static int
processTimerHandler(sd_event_source *s, uint64_t usec, void *userdata)
{
    HMI_NOTICE("wm", "Time out occurs because the client replys endDraw slow, so revert the request");
    reinterpret_cast<wm::App *>(userdata)->timerHandler();
    return 0;
}

} // namespace

void App::timerHandler()
{
    unsigned req_num = g_app_list.currentRequestNumber();
    HMI_SEQ_DEBUG(req_num, "Timer expired remove Request");
    g_app_list.reqDump();
    g_app_list.removeRequest(req_num);
    this->processNextRequest();
}

void App::removeClient(const std::string &appid)
{
    HMI_DEBUG("wm", "Remove clinet %s from list", appid.c_str());
    g_app_list.removeClient(appid);
}

bool App::subscribeEventForApp(const std::string &appid, afb_req req, const std::string &evname)
{
    if(!g_app_list.contains(appid)){
        HMI_DEBUG("wm", "Client %s is not registered", appid.c_str());
        return false;
    }
    auto client = g_app_list.lookUpClient(appid);
    return client->subscribe(req, evname);
}

/**
 * App Impl
 */
App::App(wl::display *d)
    : chooks{this},
      display{d},
      controller{},
      outputs(),
      config(),
      layers(),
      id_alloc{},
      pending_events(false),
      policy{}
{
    try
    {
        {
            auto l = load_layer_map(
                this->config.get_string("layers.json").value().c_str());
            if (l.is_ok())
            {
                this->layers = l.unwrap();
            }
            else
            {
                HMI_ERROR("wm", "%s", l.err().value());
            }
        }
    }
    catch (std::exception &e)
    {
        HMI_ERROR("wm", "Loading of configuration failed: %s", e.what());
    }
}

int App::init()
{
    if (!this->display->ok())
    {
        return -1;
    }

    if (this->layers.mapping.empty())
    {
        HMI_ERROR("wm", "No surface -> layer mapping loaded");
        return -1;
    }

    // Make afb event
    for (int i = Event_Val_Min; i <= Event_Val_Max; i++)
    {
        map_afb_event[kListEventName[i]] = afb_daemon_make_event(kListEventName[i]);
    }

    this->display->add_global_handler(
        "wl_output", [this](wl_registry *r, uint32_t name, uint32_t v) {
            this->outputs.emplace_back(std::make_unique<wl::output>(r, name, v));
        });

    this->display->add_global_handler(
        "ivi_wm", [this](wl_registry *r, uint32_t name, uint32_t v) {
            this->controller =
                std::make_unique<struct compositor::controller>(r, name, v);

            // Init controller hooks
            this->controller->chooks = &this->chooks;

            // This protocol needs the output, so lets just add our mapping here...
            this->controller->add_proxy_to_id_mapping(
                this->outputs.back()->proxy.get(),
                wl_proxy_get_id(reinterpret_cast<struct wl_proxy *>(
                    this->outputs.back()->proxy.get())));

            // Create screen
            this->controller->create_screen(this->outputs.back()->proxy.get());

            // Set display to controller
            this->controller->display = this->display;
        });

    // First level objects
    this->display->roundtrip();
    // Second level objects
    this->display->roundtrip();
    // Third level objects
    this->display->roundtrip();

    return init_layers();
}

int App::dispatch_pending_events()
{
    if (this->pop_pending_events())
    {
        this->display->dispatch_pending();
        return 0;
    }
    return -1;
}

bool App::pop_pending_events()
{
    bool x{true};
    return this->pending_events.compare_exchange_strong(
        x, false, std::memory_order_consume);
}

void App::set_pending_events()
{
    this->pending_events.store(true, std::memory_order_release);
}

optional<int> App::lookup_id(char const *name)
{
    return this->id_alloc.lookup(std::string(name));
}
optional<std::string> App::lookup_name(int id)
{
    return this->id_alloc.lookup(id);
}

/**
 * init_layers()
 */
int App::init_layers()
{
    if (!this->controller)
    {
        HMI_ERROR("wm", "ivi_controller global not available");
        return -1;
    }

    if (this->outputs.empty())
    {
        HMI_ERROR("wm", "no output was set up!");
        return -1;
    }

    auto &c = this->controller;

    auto &o = this->outputs.front();
    auto &s = c->screens.begin()->second;
    auto &layers = c->layers;

    // Write output dimensions to ivi controller...
    c->output_size = compositor::size{uint32_t(o->width), uint32_t(o->height)};
    c->physical_size = compositor::size{uint32_t(o->physical_width),
                                        uint32_t(o->physical_height)};

    // Clear scene
    layers.clear();

    // Clear screen
    s->clear();

    // Quick and dirty setup of layers
    for (auto const &i : this->layers.mapping)
    {
        c->layer_create(i.second.layer_id, o->width, o->height);
        auto &l = layers[i.second.layer_id];
        l->set_destination_rectangle(0, 0, o->width, o->height);
        l->set_visibility(1);
        HMI_DEBUG("wm", "Setting up layer %s (%d) for surface role match \"%s\"",
                  i.second.name.c_str(), i.second.layer_id, i.second.role.c_str());
    }

    // Add layers to screen
    s->set_render_order(this->layers.layers);

    this->layout_commit();

    this->layers.setupArea(o->width, o->height);

    return 0;
}

void App::surface_set_layout(int surface_id, const std::string& area)
{
    if (!this->controller->surface_exists(surface_id))
    {
        HMI_ERROR("wm", "Surface %d does not exist", surface_id);
        return;
    }

    auto o_layer_id = this->layers.get_layer_id(surface_id);

    if (!o_layer_id)
    {
        HMI_ERROR("wm", "Surface %d is not associated with any layer!", surface_id);
        return;
    }

    uint32_t layer_id = *o_layer_id;

    auto const &layer = this->layers.get_layer(layer_id);
    auto rect = this->layers.getAreaSize(area);
    auto &s = this->controller->surfaces[surface_id];

    int x = rect.x;
    int y = rect.y;
    int w = rect.w;
    int h = rect.h;

    // less-than-0 values refer to MAX + 1 - $VALUE
    // e.g. MAX is either screen width or height
    if (w < 0)
    {
        w = this->controller->output_size.w + 1 + w;
    }
    if (h < 0)
    {
        h = this->controller->output_size.h + 1 + h;
    }

    HMI_DEBUG("wm", "surface_set_layout for surface %u on layer %u", surface_id,
              layer_id);

    // set destination to the display rectangle
    s->set_destination_rectangle(x, y, w, h);

    // update area information
    this->area_info[surface_id].x = x;
    this->area_info[surface_id].y = y;
    this->area_info[surface_id].w = w;
    this->area_info[surface_id].h = h;

    HMI_DEBUG("wm", "Surface %u now on layer %u with rect { %d, %d, %d, %d }",
              surface_id, layer_id, x, y, w, h);
}

void App::layout_commit()
{
    this->controller->commit_changes();
    this->display->flush();
}

void App::setTimer()
{
    HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Timer set activate");
    if (g_timer_ev_src == nullptr)
    {
        // firsttime set into sd_event
        int ret = sd_event_add_time(afb_daemon_get_event_loop(), &g_timer_ev_src,
                                    CLOCK_REALTIME, time(NULL) * (1000000UL) + kTimeOut, 1, processTimerHandler, this);
        if (ret < 0)
        {
            HMI_ERROR("wm", "Could't set timer");
        }
    }
    else
    {
        // update timer limitation after second time
        sd_event_source_set_time(g_timer_ev_src, time(NULL) * (1000000UL) + kTimeOut);
        sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_ONESHOT);
    }
}

void App::stopTimer()
{
    unsigned req_num = g_app_list.currentRequestNumber();
    HMI_SEQ_DEBUG(req_num, "Timer stop");
    int rc = sd_event_source_set_enabled(g_timer_ev_src, SD_EVENT_OFF);
    if (rc < 0)
    {
        HMI_SEQ_ERROR(req_num, "Timer stop failed");
    }
}

WMError App::lm_release(const struct WMAction &action)
{
    //auto const &surface_id = this->lookup_id(drawing_name);
    WMError ret = WMError::LAYOUT_CHANGE_FAIL;
    unsigned req_num = g_app_list.currentRequestNumber();
    auto const &surface_id = this->lookup_id(action.role.c_str());
    if (!surface_id)
    {
        HMI_SEQ_ERROR(req_num, "Surface does not exist");
        return ret;
    }

    if (*surface_id == this->layers.main_surface)
    {
        HMI_SEQ_ERROR(req_num, "Cannot deactivate main_surface");
        return ret;
    }

    auto o_state = *this->layers.get_layout_state(*surface_id);

    if (o_state == nullptr)
    {
        HMI_SEQ_ERROR(req_num, "Could not find layer for surface");
        return ret;
    }

    struct LayoutState &state = *o_state;

    if (state.main == -1)
    {
        HMI_SEQ_ERROR(req_num, "No surface active");
        return ret;
    }

    // Check against main_surface, main_surface_name is the configuration item.
    if (*surface_id == this->layers.main_surface)
    {
        HMI_SEQ_DEBUG(req_num, "Refusing to deactivate main_surface %d", *surface_id);
        //reply(nullptr);
        return WMError::SUCCESS;
    }
    if ((state.main == *surface_id) && (state.sub == *surface_id))
    {
        HMI_SEQ_ERROR(req_num, "Surface is not active");
        return ret;
    }

    if (state.main == *surface_id)
    {
        if (state.sub != -1)
        {
            this->try_layout(
                state, LayoutState{state.sub, -1}, [&](LayoutState const &nl) {
                    std::string sub = std::move(*this->lookup_name(state.sub));

                    this->deactivate(*surface_id);
                    this->surface_set_layout(state.sub);
                    state = nl;

                    this->layout_commit();
                    std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
                    compositor::rect area_rect = this->area_info[state.sub];
                    this->emit_syncdraw(sub.c_str(), str_area.c_str(),
                                        area_rect.x, area_rect.y, area_rect.w, area_rect.h);
                    this->enqueue_flushdraw(state.sub);
                });
        }
        else
        {
            this->try_layout(state, LayoutState{-1, -1}, [&](LayoutState const &nl) {
                this->deactivate(*surface_id);
                state = nl;
                this->layout_commit();
            });
        }
    }
    else if (state.sub == *surface_id)
    {
        this->try_layout(
            state, LayoutState{state.main, -1}, [&](LayoutState const &nl) {
                std::string main = std::move(*this->lookup_name(state.main));

                this->deactivate(*surface_id);
                this->surface_set_layout(state.main);
                state = nl;

                this->layout_commit();
                std::string str_area = std::string(kNameLayoutNormal) + "." + std::string(kNameAreaFull);
                compositor::rect area_rect = this->area_info[state.main];
                this->emit_syncdraw(main.c_str(), str_area.c_str(),
                                    area_rect.x, area_rect.y, area_rect.w, area_rect.h);
                this->enqueue_flushdraw(state.main);
            });
    }
    return WMError::SUCCESS;
}

WMError App::doTransition(unsigned req_num)
{
    HMI_SEQ_DEBUG(req_num, "check policy");
    WMError ret = this->checkPolicy(req_num);
    if (ret != WMError::SUCCESS)
    {
        return ret;
    }
    HMI_SEQ_DEBUG(req_num, "Start transition.");
    ret = this->startTransition(req_num);
    return ret;
}

WMError App::checkPolicy(unsigned req_num)
{
    /*
    * Check Policy
    */
    // get current trigger
    bool found = false;
    bool split = false;
    WMError ret = WMError::LAYOUT_CHANGE_FAIL;
    auto trigger = g_app_list.getRequest(req_num, &found);
    if (!found)
    {
        ret = WMError::NO_ENTRY;
        return ret;
    }
    std::string req_area = trigger.area;

    // >>>> Compatible with current window manager until policy manager coming
    if (trigger.task == Task::TASK_ALLOCATE)
    {
        HMI_SEQ_DEBUG(req_num, "Check split or not");
        const char *msg = this->check_surface_exist(trigger.role.c_str());

        if (msg)
        {
            HMI_SEQ_ERROR(req_num, msg);
            ret = WMError::LAYOUT_CHANGE_FAIL;
            return ret;
        }

        auto const &surface_id = this->lookup_id(trigger.role.c_str());
        auto o_state = *this->layers.get_layout_state(*surface_id);
        struct LayoutState &state = *o_state;

        unsigned curernt_sid = state.main;
        split = this->can_split(state, *surface_id);

        if (split)
        {
            HMI_SEQ_DEBUG(req_num, "Split happens");
            // Get current visible role
            std::string add_role = this->lookup_name(state.main).value();
            // Set next area
            std::string add_area = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaMain);
            // Change request area
            req_area = std::string(kNameLayoutSplit) + "." + std::string(kNameAreaSub);
            HMI_SEQ_NOTICE(req_num, "Change request area from %s to %s, because split is happen", trigger.area, req_area);
            // set another action
            std::string add_name = g_app_list.getAppID(curernt_sid, add_role, &found);
            if (!found)
            {
                HMI_SEQ_ERROR(req_num, "Couldn't widhdraw with surfaceID : %s", curernt_sid);
                ret = WMError::NOT_REGISTERED;
                return ret;
            }
            HMI_SEQ_INFO(req_num, "Additional split app %s, role: %s, area: %s",
                         add_name.c_str(), add_role.c_str(), add_area.c_str());
            // Set split action
            bool end_draw_finished = false;
            WMAction split_action{
                add_name,
                add_role,
                add_area,
                TaskVisible::VISIBLE,
                end_draw_finished};
            WMError ret = g_app_list.setAction(req_num, split_action);
            if (ret != WMError::SUCCESS)
            {
                HMI_SEQ_ERROR(req_num, "Failed to set action");
                return ret;
            }
            g_app_list.reqDump();
        }
    }
    else
    {
        HMI_SEQ_DEBUG(req_num, "split doesn't happen");
    }

    // Set invisible task(Remove if policy manager finish)
    ret = this->setInvisibleTask(trigger.role, split);
    if(ret != WMError::SUCCESS)
    {
        HMI_SEQ_ERROR(req_num, "Failed to set invisible task: %s", errorDescription(ret));
        return ret;
    }

    /*  get new status from Policy Manager */
    HMI_SEQ_NOTICE(req_num, "ATM, Policy manager does't exist, then set WMAction as is");
    TaskVisible task_visible = (trigger.task == Task::TASK_ALLOCATE) ? TaskVisible::VISIBLE : TaskVisible::INVISIBLE;

    ret = g_app_list.setAction(req_num, trigger.appid, trigger.role, req_area, task_visible);
    g_app_list.reqDump();

    return ret;
}

WMError App::startTransition(unsigned req_num)
{
    bool sync_draw_happen = false;
    bool found = false;
    WMError ret = WMError::SUCCESS;
    auto actions = g_app_list.getActions(req_num, &found);
    if (!found)
    {
        ret = WMError::NO_ENTRY;
        HMI_SEQ_ERROR(req_num, "Window Manager bug :%s : Action is not set", errorDescription(ret));
        return ret;
    }

    for (const auto &y : actions)
    {
        if (y.visible != TaskVisible::INVISIBLE)
        {
            sync_draw_happen = true;
            this->emit_syncdraw(y.role, y.area);
            /* TODO: emit event for app not subscriber
            if(g_app_list.contains(y.appid))
                g_app_list.lookUpClient(y.appid)->emit_syncdraw(y.role, y.area); */
        }
    }

    if (sync_draw_happen)
    {
        this->setTimer();
    }
    else
    {
        // deactivate only, no syncDraw
        // Make it deactivate here
        for (const auto &z : actions)
        {
            if (g_app_list.contains(z.appid))
            {
                auto client = g_app_list.lookUpClient(z.appid);
                this->deactivate(client->surfaceID(z.role));
            }
        }
        ret = NO_LAYOUT_CHANGE;
    }
    return ret;
}

WMError App::setInvisibleTask(const std::string &role, bool split)
{
    unsigned req = g_app_list.currentRequestNumber();
    HMI_SEQ_DEBUG(req, "set current visible app to invisible task");
    // This task is copied from original actiavete surface
    const char *drawing_name = role.c_str();
    auto const &surface_id = this->lookup_id(drawing_name);
    auto layer_id = this->layers.get_layer_id(*surface_id);
    auto o_state = *this->layers.get_layout_state(*surface_id);
    struct LayoutState &state = *o_state;
    std::string add_name, add_role;
    std::string add_area = "";
    int surface;
    TaskVisible task_visible = TaskVisible::INVISIBLE;
    bool end_draw_finished = true;
    bool found = false;

    for (auto const &l : this->layers.mapping)
    {
        if (l.second.layer_id <= *layer_id)
        {
            continue;
        }
        if (l.second.state.main != -1)
        {
            //this->deactivate(l.second.state.main);
            surface = l.second.state.main;
            add_role = *this->id_alloc.lookup(surface);
            add_name = g_app_list.getAppID(surface, add_role, &found);
            if(!found){
                return WMError::NOT_REGISTERED;
            }
            HMI_SEQ_INFO(req, "Invisible %s", add_name.c_str());
            WMAction act{add_name, add_role, add_area, task_visible, end_draw_finished};
            g_app_list.setAction(req, act);
            l.second.state.main = -1;
        }

        if (l.second.state.sub != -1)
        {
            //this->deactivate(l.second.state.sub);
            surface = l.second.state.sub;
            add_role = *this->id_alloc.lookup(surface);
            add_name = g_app_list.getAppID(surface, add_role, &found);
            if (!found)
            {
                return WMError::NOT_REGISTERED;
            }
            HMI_SEQ_INFO(req, "Invisible %s", add_name.c_str());
            WMAction act{add_name, add_role, add_area, task_visible, end_draw_finished};
            g_app_list.setAction(req, act);
            l.second.state.sub = -1;
        }
    }

    // change current state here, but this is hack
    auto layer = this->layers.get_layer(*layer_id);

    if (state.main == -1)
    {
        HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
        //state = LayoutState{*surface_id};
        /* this->try_layout(
            state, LayoutState{*surface_id}, [&](LayoutState const &nl) {
                HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);
                //this->surface_set_layout(*surface_id);
                state = nl;

                //compositor::rect area_rect = this->area_info[*surface_id];
            }); */
    }
    else
    {
        if (0 != strcmp(drawing_name, "HomeScreen"))
        {
            if (split)
            {
                std::string main =
                    std::move(*this->id_alloc.lookup(state.main));
                if (state.sub != *surface_id)
                {
                    if (state.sub != -1)
                    {
                        //this->deactivate(state.sub);
                        WMAction deact_sub;
                        deact_sub.role = main;
                        deact_sub.area = add_area;
                        deact_sub.appid = g_app_list.getAppID(state.sub, main, &found);
                        if (!found)
                        {
                            HMI_SEQ_DEBUG(req, "sub surface doesn't exist");
                            return WMError::NOT_REGISTERED;
                        }
                        deact_sub.visible = task_visible;
                        deact_sub.end_draw_finished = end_draw_finished;
                        HMI_SEQ_DEBUG(req, "sub surface doesn't exist");
                        g_app_list.setAction(req, deact_sub);
                    }
                }
                //state = LayoutState{state.main, *surface_id};
            }
            else
            {
                HMI_DEBUG("wm", "Layout: %s", kNameLayoutNormal);

                //this->surface_set_layout(*surface_id);
                if (state.main != *surface_id)
                {
                    // this->deactivate(state.main);
                    WMAction deact_main;
                    deact_main.role = std::move(*this->id_alloc.lookup(state.main));
                    ;
                    deact_main.area = add_area;
                    deact_main.appid = g_app_list.getAppID(state.main, deact_main.role, &found);
                    if (!found)
                    {
                        HMI_SEQ_DEBUG(req, "sub surface ddoesn't exist");
                        return WMError::NOT_REGISTERED;
                    }
                    deact_main.visible = task_visible;
                    deact_main.end_draw_finished = end_draw_finished;
                    HMI_SEQ_DEBUG(req, "sub surface doesn't exist");
                    g_app_list.setAction(req, deact_main);
                }
                if (state.sub != -1)
                {
                    if (state.sub != *surface_id)
                    {
                        //this->deactivate(state.sub);
                        WMAction deact_sub;
                        deact_sub.role = std::move(*this->id_alloc.lookup(state.sub));
                        ;
                        deact_sub.area = add_area;
                        deact_sub.appid = g_app_list.getAppID(state.sub, deact_sub.role, &found);
                        if (!found)
                        {
                            HMI_SEQ_DEBUG(req, "sub surface ddoesn't exist");
                            return WMError::NOT_REGISTERED;
                        }
                        deact_sub.visible = task_visible;
                        deact_sub.end_draw_finished = end_draw_finished;
                        HMI_SEQ_DEBUG(req, "sub surface doesn't exist");
                        g_app_list.setAction(req, deact_sub);
                    }
                }
                //state = LayoutState{*surface_id};
            }
        }
    }
    return WMError::SUCCESS;
}

const char *App::check_surface_exist(const char *drawing_name)
{
    auto const &surface_id = this->lookup_id(drawing_name);
    if (!surface_id)
    {
        //reply("Surface does not exist");
        return "Surface does not exist";
    }

    if (!this->controller->surface_exists(*surface_id))
    {
        //reply("Surface does not exist in controller!");
        return "Surface does not exist in controller!";
    }

    auto layer_id = this->layers.get_layer_id(*surface_id);

    if (!layer_id)
    {
        //reply("Surface is not on any layer!");
        return "Surface is not on any layer!";
    }

    auto o_state = *this->layers.get_layout_state(*surface_id);

    if (o_state == nullptr)
    {
        //reply("Could not find layer for surface");
        return "Could not find layer for surface";
    }

    HMI_DEBUG("wm", "surface %d is detected", *surface_id);
    return nullptr;
    //reply(nullptr);
}

WMError App::setRequest(const std::string& appid, const std::string &role, const std::string &area,
                            Task task, unsigned* req_num)
{
    if (!g_app_list.contains(appid))
    {
        return WMError::NOT_REGISTERED;
    }

    auto client = g_app_list.lookUpClient(appid);

    /*
   * Queueing Phase
   */
    unsigned current = g_app_list.currentRequestNumber();
    unsigned requested_num = g_app_list.getRequestNumber(appid);
    if (requested_num != 0)
    {
        HMI_SEQ_INFO(requested_num, "%s %s %s request is already queued", appid.c_str(), role.c_str(), area.c_str());
        return REQ_REJECTED;
    }

    WMRequest req = WMRequest(appid, role, area, task);
    unsigned new_req = g_app_list.addAllocateRequest(req);
    *req_num = new_req;
    g_app_list.reqDump();

    HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", appid.c_str(), role.c_str(), area.c_str());

    return WMError::SUCCESS;
}

void App::api_activate_surface(char const *appid, char const *drawing_name, char const *drawing_area, const reply_func &reply)
{
    ST();

    std::string id = appid;
    std::string role = drawing_name;
    std::string area = drawing_area;
    Task task = Task::TASK_ALLOCATE;
    unsigned req_num = 0;
    WMError ret = WMError::UNKNOWN;

    ret = this->setRequest(id, role, area, task, &req_num);

    if(ret != WMError::SUCCESS)
    {
        HMI_ERROR("wm", errorDescription(ret));
        reply("Failed to set request");
        return;
    }

    reply(nullptr);
    if (req_num != g_app_list.currentRequestNumber())
    {
        // Add request, then invoked after the previous task is finished
        HMI_SEQ_DEBUG(req_num, "request is accepted");
        return;
    }

    /*
    * Do allocate tasks
    */
    ret = this->doTransition(req_num);

    if (ret != WMError::SUCCESS)
    {
        //this->emit_error()
        HMI_SEQ_ERROR(req_num, errorDescription(ret));
        g_app_list.removeRequest(req_num);
        g_app_list.next();
        g_app_list.reqDump();
    }
}

void App::api_deactivate_surface(char const *appid, char const *drawing_name, const reply_func &reply)
{
    ST();

    /*
   * Check Phase
   */
    std::string id = appid;
    std::string role = drawing_name;
    std::string area = ""; //drawing_area;

    if (!g_app_list.contains(id))
    {
        reply("app doesn't request 'requestSurface' yet");
        return;
    }
    auto client = g_app_list.lookUpClient(id);

    /*
   * Queueing Phase
   */
    unsigned current = g_app_list.currentRequestNumber();
    unsigned requested_num = g_app_list.getRequestNumber(id);
    if (requested_num != 0)
    {
        HMI_SEQ_INFO(requested_num, "%s %s %s request is already queued", id.c_str(), role.c_str(), area.c_str());
        reply("already requested");
        return;
    }

    WMRequest req = WMRequest(id, role, area, Task::TASK_RELEASE);
    unsigned new_req = g_app_list.addAllocateRequest(req);
    g_app_list.reqDump();

    HMI_SEQ_DEBUG(current, "%s start sequence with %s, %s", id.c_str(), role.c_str(), area.c_str());

    reply(nullptr);
    if (new_req != current)
    {
        // Add request, then invoked after the previous task is finished
        HMI_SEQ_DEBUG(new_req, "request is accepted");
        return;
    }

    /*
    * Do allocate tasks
    */
    WMError ret = this->doTransition(new_req);

    if (ret != WMError::SUCCESS)
    {
        HMI_SEQ_ERROR(new_req, errorDescription(ret));
        g_app_list.removeRequest(new_req);
        g_app_list.next();
        //this->emit_error()
    }
}

void App::enqueue_flushdraw(int surface_id)
{
    this->check_flushdraw(surface_id);
    HMI_DEBUG("wm", "Enqueuing EndDraw for surface_id %d", surface_id);
    this->pending_end_draw.push_back(surface_id);
}

void App::check_flushdraw(int surface_id)
{
    auto i = std::find(std::begin(this->pending_end_draw),
                       std::end(this->pending_end_draw), surface_id);
    if (i != std::end(this->pending_end_draw))
    {
        auto n = this->lookup_name(surface_id);
        HMI_ERROR("wm", "Application %s (%d) has pending EndDraw call(s)!",
                  n ? n->c_str() : "unknown-name", surface_id);
        std::swap(this->pending_end_draw[std::distance(
                      std::begin(this->pending_end_draw), i)],
                  this->pending_end_draw.back());
        this->pending_end_draw.resize(this->pending_end_draw.size() - 1);
    }
}

WMError App::doEndDraw(unsigned req_num)
{
    // get actions
    bool found;
    auto actions = g_app_list.getActions(req_num, &found);
    WMError ret = WMError::SUCCESS;
    if (!found)
    {
        ret = WMError::NO_ENTRY;
        return ret;
    }

    HMI_SEQ_INFO(req_num, "do endDraw");

    // layout change and make it visible
    for (const auto &act : actions)
    {
        // layout change
        if(!g_app_list.contains(act.appid)){
            ret = WMError::NOT_REGISTERED;
        }
        ret = this->layoutChange(act);
        if(ret != WMError::SUCCESS)
        {
            HMI_SEQ_WARNING(req_num, "Failed to manipulate surfaces while state change : %s", errorDescription(ret));
            return ret;
        }
        ret = this->visibilityChange(act);
        if (ret != WMError::SUCCESS)
        {
            HMI_SEQ_WARNING(req_num, "Failed to manipulate surfaces while state change : %s", errorDescription(ret));
            return ret;
        }
        HMI_SEQ_DEBUG(req_num, "visible %s", act.role.c_str());
        //this->lm_enddraw(act.role.c_str());
    }

    // Change current state
    this->changeCurrentState(req_num);

    HMI_SEQ_INFO(req_num, "emit flushDraw");

    for(const auto &act_flush : actions)
    {
        if(act_flush.visible != TaskVisible::INVISIBLE)
        {
            this->emit_flushdraw(act_flush.role.c_str());
        }
    }

    return ret;
}

WMError App::setSurfaceSize(unsigned surface, const std::string &area)
{
    this->surface_set_layout(surface, area);

    return WMError::SUCCESS;
}

WMError App::layoutChange(const WMAction &action)
{
    if (action.visible == TaskVisible::INVISIBLE)
    {
        // Visibility is not change -> no redraw is required
        return WMError::SUCCESS;
    }
    auto client = g_app_list.lookUpClient(action.appid);
    unsigned surface = client->surfaceID(action.role);
    if (surface == 0)
    {
        HMI_SEQ_ERROR(g_app_list.currentRequestNumber(),
                      "client doesn't have surface with role(%s)", action.role.c_str());
        return WMError::NOT_REGISTERED;
    }
    // Layout Manager
    WMError ret = this->setSurfaceSize(surface, action.area);
    return ret;
}

WMError App::visibilityChange(const WMAction &action)
{
    HMI_SEQ_DEBUG(g_app_list.currentRequestNumber(), "Change visibility");
    if(!g_app_list.contains(action.appid)){
        return WMError::NOT_REGISTERED;
    }
    auto client = g_app_list.lookUpClient(action.appid);
    unsigned surface = client->surfaceID(action.role);
    if(surface == 0)
    {
        HMI_SEQ_ERROR(g_app_list.currentRequestNumber(),
                      "client doesn't have surface with role(%s)", action.role.c_str());
        return WMError::NOT_REGISTERED;
    }

    if (action.visible != TaskVisible::INVISIBLE)
    {
        this->activate(surface); // Layout Manager task
    }
    else
    {
        this->deactivate(surface); // Layout Manager task
    }
    return WMError::SUCCESS;
}

WMError App::changeCurrentState(unsigned req_num)
{
    HMI_SEQ_DEBUG(req_num, "Change current layout state");
    bool trigger_found = false, action_found = false;
    auto trigger = g_app_list.getRequest(req_num, &trigger_found);
    auto actions = g_app_list.getActions(req_num, &action_found);
    if (!trigger_found || !action_found)
    {
        HMI_SEQ_ERROR(req_num, "Action not found");
        return WMError::LAYOUT_CHANGE_FAIL;
    }

    // Layout state reset
    struct LayoutState reset_state{-1, -1};
    HMI_SEQ_DEBUG(req_num,"Reset layout state");
    for (const auto &action : actions)
    {
        if(!g_app_list.contains(action.appid)){
            return WMError::NOT_REGISTERED;
        }
        auto client = g_app_list.lookUpClient(trigger.appid);
        auto pCurState = *this->layers.get_layout_state((int)client->surfaceID(trigger.role));
        if(pCurState == nullptr)
        {
            HMI_SEQ_ERROR(req_num, "Counldn't find current status");
            continue;
        }
        pCurState->main = reset_state.main;
        pCurState->sub = reset_state.sub;
    }

    HMI_SEQ_DEBUG(req_num, "Change state");
    for (const auto &action : actions)
    {
        auto client = g_app_list.lookUpClient(action.appid);
        auto pLayerCurState = *this->layers.get_layout_state((int)client->surfaceID(action.role));
        if (pLayerCurState == nullptr)
        {
            HMI_SEQ_ERROR(req_num, "Counldn't find current status");
            continue;
        }
        int surface = -1;

        if (action.visible != TaskVisible::INVISIBLE)
        {
            surface = (int)client->surfaceID(action.role);
            HMI_SEQ_INFO(req_num, "Change %s state visible area : %s", action.role.c_str(), action.area.c_str());
            // visible == true -> layout changes
            if(action.area == "normal.full" || action.area == "split.main")
            {
                pLayerCurState->main = surface;
            }
            else if(action.role == "split.sub")
            {
                pLayerCurState->sub = surface;
            }
            else
            {
                // normalfull
                pLayerCurState->main = surface;
            }
        }
    }

    return WMError::SUCCESS;
}

void App::api_enddraw(char const *appid, char const *drawing_name)
{
    std::string id = appid;
    std::string role = drawing_name;
    unsigned current_req = g_app_list.currentRequestNumber();
    bool result = g_app_list.setEndDrawFinished(current_req, id, role);

    if (!result)
    {
        HMI_ERROR("wm", "%s is not in transition state", id.c_str());
        return;
    }

    if (g_app_list.endDrawFullfilled(current_req))
    {
        // do task for endDraw
        this->stopTimer();
        WMError ret = this->doEndDraw(current_req);

        if(ret != WMError::SUCCESS)
        {
            //this->emit_error();
        }
        HMI_SEQ_INFO(current_req, "Finish request status: %s", errorDescription(ret));

        g_app_list.removeRequest(current_req);

        this->processNextRequest();
    }
    else
    {
        HMI_SEQ_INFO(current_req, "Wait other App call endDraw");
        return;
    }
}

void App::processNextRequest()
{
    g_app_list.next();
    g_app_list.reqDump();
    unsigned req_num = g_app_list.currentRequestNumber();
    if (g_app_list.haveRequest())
    {
        HMI_SEQ_DEBUG(req_num, "Process next request");
        WMError rc = doTransition(req_num);
        if (rc != WMError::SUCCESS)
        {
            HMI_SEQ_ERROR(req_num, errorDescription(rc));
        }
    }
    else
    {
        HMI_SEQ_DEBUG(req_num, "Nothing Request. Waiting Request");
    }
}

void App::api_ping() { this->dispatch_pending_events(); }

void App::send_event(char const *evname, char const *label)
{
    HMI_DEBUG("wm", "%s: %s(%s)", __func__, evname, label);

    json_object *j = json_object_new_object();
    json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));

    int ret = afb_event_push(this->map_afb_event[evname], j);
    if (ret != 0)
    {
        HMI_DEBUG("wm", "afb_event_push failed: %m");
    }
}

void App::send_event(char const *evname, char const *label, char const *area,
                     int x, int y, int w, int h)
{
    HMI_DEBUG("wm", "%s: %s(%s, %s) x:%d y:%d w:%d h:%d",
              __func__, evname, label, area, x, y, w, h);

    json_object *j_rect = json_object_new_object();
    json_object_object_add(j_rect, kKeyX, json_object_new_int(x));
    json_object_object_add(j_rect, kKeyY, json_object_new_int(y));
    json_object_object_add(j_rect, kKeyWidth, json_object_new_int(w));
    json_object_object_add(j_rect, kKeyHeight, json_object_new_int(h));

    json_object *j = json_object_new_object();
    json_object_object_add(j, kKeyDrawingName, json_object_new_string(label));
    json_object_object_add(j, kKeyDrawingArea, json_object_new_string(area));
    json_object_object_add(j, kKeyDrawingRect, j_rect);

    int ret = afb_event_push(this->map_afb_event[evname], j);
    if (ret != 0)
    {
        HMI_DEBUG("wm", "afb_event_push failed: %m");
    }
}

/**
 * proxied events
 */
void App::surface_created(uint32_t surface_id)
{
    auto layer_id = this->layers.get_layer_id(surface_id);
    if (!layer_id)
    {
        HMI_DEBUG("wm", "Newly created surfce %d is not associated with any layer!",
                  surface_id);
        return;
    }

    HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", surface_id, *layer_id);

    this->controller->layers[*layer_id]->add_surface(surface_id);
    this->layout_commit();
    // activate the main_surface right away
    /*if (surface_id == static_cast<unsigned>(this->layers.main_surface)) {
      HMI_DEBUG("wm", "Activating main_surface (%d)", surface_id);

      this->api_activate_surface(
         this->lookup_name(surface_id).value_or("unknown-name").c_str());
   }*/

    // search pid from surfaceID

    // pick up appid from pid from application manager

    // check appid then add it to the client
}

void App::surface_removed(uint32_t surface_id)
{
    HMI_DEBUG("wm", "surface_id is %u", surface_id);

    g_app_list.removeSurface(surface_id);
}

void App::emit_activated(char const *label)
{
    this->send_event(kListEventName[Event_Active], label);
}

void App::emit_deactivated(char const *label)
{
    this->send_event(kListEventName[Event_Inactive], label);
}

void App::emit_syncdraw(char const *label, char const *area, int x, int y, int w, int h)
{
    this->send_event(kListEventName[Event_SyncDraw], label, area, x, y, w, h);
}

void App::emit_syncdraw(const std::string &role, const std::string &area)
{
    compositor::rect rect = this->layers.getAreaSize(area);
    //this->lm_get_area_info(area, &x, &y, &w, &h);
    this->send_event(kListEventName[Event_SyncDraw],
        role.c_str(), area.c_str(), rect.x, rect.y, rect.w, rect.h);
}

void App::emit_flushdraw(char const *label)
{
    this->send_event(kListEventName[Event_FlushDraw], label);
}

void App::emit_visible(char const *label, bool is_visible)
{
    this->send_event(is_visible ? kListEventName[Event_Visible] : kListEventName[Event_Invisible], label);
}

void App::emit_invisible(char const *label)
{
    return emit_visible(label, false);
}

void App::emit_visible(char const *label) { return emit_visible(label, true); }

result<int> App::api_request_surface(char const *appid, char const *drawing_name)
{
    auto lid = this->layers.get_layer_id(std::string(drawing_name));
    if (!lid)
    {
        /**
       * register drawing_name as fallback and make it displayed.
       */
        lid = this->layers.get_layer_id(std::string("Fallback"));
        HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", drawing_name);
        if (!lid)
        {
            return Err<int>("Drawing name does not match any role, Fallback is disabled");
        }
    }

    auto rname = this->lookup_id(drawing_name);
    if (!rname)
    {
        // name does not exist yet, allocate surface id...
        auto id = int(this->id_alloc.generate_id(drawing_name));
        this->layers.add_surface(id, *lid);

        // set the main_surface[_name] here and now
        if (!this->layers.main_surface_name.empty() &&
            this->layers.main_surface_name == drawing_name)
        {
            this->layers.main_surface = id;
            HMI_DEBUG("wm", "Set main_surface id to %u", id);
        }

        // add client into the db
        std::string appid_str(appid);
        std::string role(drawing_name);
        //g_app_list.addClient(appid_str, role);
        g_app_list.addClient(appid_str, *lid, id, role);

        return Ok<int>(id);
    }

    // Check currently registered drawing names if it is already there.
    return Err<int>("Surface already present");
}

char const *App::api_request_surface(char const *appid, char const *drawing_name,
                                     char const *ivi_id)
{
    ST();

    auto lid = this->layers.get_layer_id(std::string(drawing_name));
    unsigned sid = std::stol(ivi_id);

    if (!lid)
    {
        /**
       * register drawing_name as fallback and make it displayed.
       */
        lid = this->layers.get_layer_id(std::string("Fallback"));
        HMI_DEBUG("wm", "%s is not registered in layers.json, then fallback as normal app", drawing_name);
        if (!lid)
        {
            return "Drawing name does not match any role, Fallback is disabled";
        }
    }

    auto rname = this->lookup_id(drawing_name);

    if (rname)
    {
        return "Surface already present";
    }

    // register pair drawing_name and ivi_id
    this->id_alloc.register_name_id(drawing_name, sid);
    this->layers.add_surface(sid, *lid);

    // this surface is already created
    HMI_DEBUG("wm", "surface_id is %u, layer_id is %u", sid, *lid);

    this->controller->layers[*lid]->add_surface(sid);
    this->layout_commit();

    return nullptr;
}

result<json_object *> App::api_get_display_info()
{
    // Check controller
    if (!this->controller)
    {
        return Err<json_object *>("ivi_controller global not available");
    }

    // Set display info
    compositor::size o_size = this->controller->output_size;
    compositor::size p_size = this->controller->physical_size;

    json_object *object = json_object_new_object();
    json_object_object_add(object, kKeyWidthPixel, json_object_new_int(o_size.w));
    json_object_object_add(object, kKeyHeightPixel, json_object_new_int(o_size.h));
    json_object_object_add(object, kKeyWidthMm, json_object_new_int(p_size.w));
    json_object_object_add(object, kKeyHeightMm, json_object_new_int(p_size.h));

    return Ok<json_object *>(object);
}

result<json_object *> App::api_get_area_info(char const *drawing_name)
{
    HMI_DEBUG("wm", "called");

    // Check drawing name, surface/layer id
    auto const &surface_id = this->lookup_id(drawing_name);
    if (!surface_id)
    {
        return Err<json_object *>("Surface does not exist");
    }

    if (!this->controller->surface_exists(*surface_id))
    {
        return Err<json_object *>("Surface does not exist in controller!");
    }

    auto layer_id = this->layers.get_layer_id(*surface_id);
    if (!layer_id)
    {
        return Err<json_object *>("Surface is not on any layer!");
    }

    auto o_state = *this->layers.get_layout_state(*surface_id);
    if (o_state == nullptr)
    {
        return Err<json_object *>("Could not find layer for surface");
    }

    struct LayoutState &state = *o_state;
    if ((state.main != *surface_id) && (state.sub != *surface_id))
    {
        return Err<json_object *>("Surface is inactive");
    }

    // Set area rectangle
    compositor::rect area_info = this->area_info[*surface_id];
    json_object *object = json_object_new_object();
    json_object_object_add(object, kKeyX, json_object_new_int(area_info.x));
    json_object_object_add(object, kKeyY, json_object_new_int(area_info.y));
    json_object_object_add(object, kKeyWidth, json_object_new_int(area_info.w));
    json_object_object_add(object, kKeyHeight, json_object_new_int(area_info.h));

    return Ok<json_object *>(object);
}

void App::activate(int id)
{
    auto ip = this->controller->sprops.find(id);
    if (ip != this->controller->sprops.end())
    {
        this->controller->surfaces[id]->set_visibility(1);
        char const *label =
            this->lookup_name(id).value_or("unknown-name").c_str();

         // FOR CES DEMO >>>
        if ((0 == strcmp(label, "Radio"))       ||
            (0 == strcmp(label, "MediaPlayer")) ||
            (0 == strcmp(label, "Music"))       ||
            (0 == strcmp(label, "Navigation")))
        {
            for (auto i = surface_bg.begin(); i != surface_bg.end(); ++i)
            {
                if (id == *i)
                {
                    // Remove id
                    this->surface_bg.erase(i);

                    // Remove from BG layer (999)
                    HMI_DEBUG("wm", "Remove %s(%d) from BG layer", label, id);
                    this->controller->layers[999]->remove_surface(id);

                    // Add to FG layer (1001)
                    HMI_DEBUG("wm", "Add %s(%d) to FG layer", label, id);
                    this->controller->layers[1001]->add_surface(id);

                    for (int j : this->surface_bg)
                    {
                        HMI_DEBUG("wm", "Stored id:%d", j);
                    }
                    break;
                }
            }
        }
        // <<< FOR CES DEMO
        this->layout_commit();

        this->emit_visible(label);
        this->emit_activated(label);
    }
}

void App::deactivate(int id)
{
    auto ip = this->controller->sprops.find(id);
    if (ip != this->controller->sprops.end())
    {
        char const *label =
            this->lookup_name(id).value_or("unknown-name").c_str();

        // FOR CES DEMO >>>
        if ((0 == strcmp(label, "Radio")) || (0 == strcmp(label, "MediaPlayer")) || (0 == strcmp(label, "Music")) || (0 == strcmp(label, "Navigation")))
        {

            // Store id
            this->surface_bg.push_back(id);

            // Remove from FG layer (1001)
            HMI_DEBUG("wm", "Remove %s(%d) from FG layer", label, id);
            this->controller->layers[1001]->remove_surface(id);

            // Add to BG layer (999)
            HMI_DEBUG("wm", "Add %s(%d) to BG layer", label, id);
            this->controller->layers[999]->add_surface(id);

            for (int j : surface_bg)
            {
                HMI_DEBUG("wm", "Stored id:%d", j);
            }
        }
        else
        {
            this->controller->surfaces[id]->set_visibility(0);
        }
        // <<< FOR CES DEMO

        this->emit_deactivated(label);
        this->emit_invisible(label);
    }
}

void App::deactivate_main_surface()
{
    this->layers.main_surface = -1;
    std::string appid = "HomeScreen";
    this->api_deactivate_surface(appid.c_str(), this->layers.main_surface_name.c_str(), [](const char *) {});
}

bool App::can_split(struct LayoutState const &state, int new_id)
{
    if (state.main != -1 && state.main != new_id)
    {
        auto new_id_layer = this->layers.get_layer_id(new_id).value();
        auto current_id_layer = this->layers.get_layer_id(state.main).value();

        // surfaces are on separate layers, don't bother.
        if (new_id_layer != current_id_layer)
        {
            return false;
        }

        std::string const &new_id_str = this->lookup_name(new_id).value();
        std::string const &cur_id_str = this->lookup_name(state.main).value();

        auto const &layer = this->layers.get_layer(new_id_layer);

        HMI_DEBUG("wm", "layer info name: %s", layer->name.c_str());

        if (layer->layouts.empty())
        {
            return false;
        }

        for (auto i = layer->layouts.cbegin(); i != layer->layouts.cend(); i++)
        {
            HMI_DEBUG("wm", "%d main_match '%s'", new_id_layer, i->main_match.c_str());
            auto rem = std::regex(i->main_match);
            if (std::regex_match(cur_id_str, rem))
            {
                // build the second one only if the first already matched
                HMI_DEBUG("wm", "%d sub_match '%s'", new_id_layer, i->sub_match.c_str());
                auto res = std::regex(i->sub_match);
                if (std::regex_match(new_id_str, res))
                {
                    HMI_DEBUG("wm", "layout matched!");
                    return true;
                }
            }
        }
    }

    return false;
}

void App::try_layout(struct LayoutState & /*state*/,
                     struct LayoutState const &new_layout,
                     std::function<void(LayoutState const &nl)> apply)
{
    if (this->policy.layout_is_valid(new_layout))
    {
        apply(new_layout);
    }
}

/**
 * controller_hooks
 */
void controller_hooks::surface_created(uint32_t surface_id)
{
    this->app->surface_created(surface_id);
}

void controller_hooks::surface_removed(uint32_t surface_id)
{
    this->app->surface_removed(surface_id);
}

void controller_hooks::surface_visibility(uint32_t /*surface_id*/,
                                          uint32_t /*v*/) {}

void controller_hooks::surface_destination_rectangle(uint32_t /*surface_id*/,
                                                     uint32_t /*x*/,
                                                     uint32_t /*y*/,
                                                     uint32_t /*w*/,
                                                     uint32_t /*h*/) {}

} // namespace wm