diff options
| -rw-r--r-- | getting-started/machines/R-Car-Starter-Kit-gen3.md | 46 |
1 files changed, 30 insertions, 16 deletions
diff --git a/getting-started/machines/R-Car-Starter-Kit-gen3.md b/getting-started/machines/R-Car-Starter-Kit-gen3.md index 2189a52..1631c51 100644 --- a/getting-started/machines/R-Car-Starter-Kit-gen3.md +++ b/getting-started/machines/R-Car-Starter-Kit-gen3.md @@ -35,11 +35,12 @@ Once you registered, you can download two zip files. Here after is an example of the typical files downloaded at the time of writing: ``` +test -f ${XDG_CONFIG_HOME:-~/.config}/user-dirs.dirs && source ${XDG_CONFIG_HOME:-~/.config}/user-dirs.dirs chmod a+r $XDG_DOWNLOAD_DIR/*.zip ls -1 $XDG_DOWNLOAD_DIR total 8220 --rw-r--r--. 1 1664 agl-sdk 4.5M Dec 8 15:23 R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20170125.zip --rw-r--r--. 1 1664 agl-sdk 2.5M Dec 8 15:24 R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20170125.zip +-rw-r--r--. 1 1664 agl-sdk 4.5M Dec 8 15:23 R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20170427.zip +-rw-r--r--. 1 1664 agl-sdk 2.7M Dec 8 15:24 R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20170427.zip ``` ## Setting up the build environment: @@ -63,7 +64,7 @@ Now, init your build environment: ``` cd $AGL_TOP -source meta-agl/scripts/aglsetup.sh -m $MACHINE -b build agl-devel agl-demo agl-netboot agl-appfw-smack +source meta-agl/scripts/aglsetup.sh -m $MACHINE -b build agl-devel agl-demo agl-netboot agl-appfw-smack agl-localdev ``` **IMPORTANT NOTE**: Read the log to be sure you had no error during your setup. @@ -75,12 +76,11 @@ In case of missing graphics drivers, you could notice an error message as follow /home/working/workspace_agl_master /home/working/workspace_agl_master/build_gen3 The graphics and multimedia acceleration packages for the R-Car Gen3 board can be downloaded from: - https://www.renesas.com/en-us/software/D6000821.html - https://www.renesas.com/en-us/software/D6000822.html + http://www.renesas.com/secret/r_car_download/rcar_demoboard.jsp These 2 files from there should be store in your'/home/devel/Téléchargements' directory. - R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20170125.zip - R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20170125.zip + R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20170427.zip + R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20170427.zip /home/working/workspace_agl_master/build_gen3 --- fragment /home/working/workspace_agl_master/meta-agl/templates/base/99_setup_EULAconf.sh --- end of setup script @@ -129,7 +129,7 @@ ls -l $AGL_TOP/build/tmp/deploy/images/$MACHINE ``` #### Note -In case of failure of the build it is safe to first check that the Linux distribution chosen for your host has been validated for version 2.1 of Yocto. +In case of failure of the build it is safe to first check that the Linux distribution chosen for your host has been validated for version 2.2 of Yocto. # Booting AGL Image on R-Car Starter Kit Gen3 boards using a microSD card @@ -283,12 +283,20 @@ sudo $TAR --extract --numeric-owner --preserve-permissions --preserve-order --to ``` Copy Kernel Image and Device Tree Blob file into the **boot** directory: -* For machine h3ulcb: +* For machine h3ulcb (BSP >= 2.19): + +``` +sudo cp Image-r8a7795-es1-h3ulcb.dtb $SDCARD/boot/ +``` + +* For machine h3ulcb (BSP < 2.19): + ``` sudo cp Image-r8a7795-h3ulcb.dtb $SDCARD/boot/ ``` * For machine m3ulcb: + ``` sudo cp Image-r8a7796-m3ulcb.dtb $SDCARD/boot/ ``` @@ -500,21 +508,27 @@ setenv bootargs console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait rw rootfstype setenv bootcmd run load_ker\; run load_dtb\; booti 0x48080000 - 0x48000000 setenv load_ker ext4load mmc 0:1 0x48080000 /boot/Image ``` - - * For machine h3ulcb: - + + * For machine h3ulcb (BSP >= 2.19): + + ``` +setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-es1-h3ulcb.dtb + ``` + + * For machine h3ulcb (BSP < 2.19): + ``` setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb ``` - + * For machine m3ulcb: - + ``` setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb ``` - + * Finally save boot environment: - + ``` saveenv ``` |