summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--getting-started/machines/R-Car-Starter-Kit-gen3.md545
1 files changed, 545 insertions, 0 deletions
diff --git a/getting-started/machines/R-Car-Starter-Kit-gen3.md b/getting-started/machines/R-Car-Starter-Kit-gen3.md
new file mode 100644
index 0000000..9ac8ae0
--- /dev/null
+++ b/getting-started/machines/R-Car-Starter-Kit-gen3.md
@@ -0,0 +1,545 @@
+# Renesas R-Car Starter Kit gen 3 (h3ulcb, m3ulcb) Hardware setup
+Here is a non exhaustive list of hardware parts that could be used to setup the Starter Kit gen 3 board development environment:
+* Starter Kit gen 3 board with its power supply
+* mini USB-A cable for serial console
+* USB 2.0 Hub
+* Ethernet cable
+* HDMI type D (Micro connector) cable and associated display
+* micro-SD Card (at least 4GB)
+* USB touch screen device like the GeChic 1502i
+
+For more information and latest news, please check :
+* For h3ulcb [Here][R-car h3ulcb]
+* For m3ulcb [Here][R-car m3ulcb]
+
+The following documents may also be helpful:
+* Yocto-Gen3 on elinux [Link][R-car yocto]
+
+# Building the AGL Demo Platform for R-Car Starter Kit gen 3
+Before set up Build Environment you need to setup the proprietary drivers.
+* Download Renesas graphics drivers with a "click through" license from Renesas website [Link][rcar demoboard]
+ * Under the Target hardware: **R-Car H3/M3** section.
+
+#### Note:
+* That you have to register with a free account on MyRenesas and accept the license condition before downloading them.
+The operation is fast and simple but nevertheless mandatory to access evaluation of non open-source drivers for free.
+Once you registered, you can download two zip files.
+* The files must be store into directory ~/Downloads (or $XDG_DOWNLOAD_DIR).
+Here after is an example of their names:
+```
+chmod a+r $XDG_DOWNLOAD_DIR/*.zip
+ls -l $XDG_DOWNLOAD_DIR
+total 8220
+-rw-r--r-- 1 XXX XXX 4619114 14 sept. 05:02 R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20160906.tar.gz
+-rw-r--r-- 1 XXX XXX 4619796 10 oct. 23:23 R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20160906.zip
+```
+
+### Set up Build Environment:
+* To build AGL demo platform for R-Car Starter Kit gen 3 board feature **agl-demo** and :
+ * for machine **h3ulcb** :
+ ```
+ export MACHINE=h3ulcb
+ ```
+ * for machine **m3ulcb** :
+ ```
+ export MACHINE=m3ulcb
+ ```
+
+* Now init your build environement:
+```
+cd $AGL_TOP
+source meta-agl/scripts/aglsetup.sh -m $MACHINE -b build agl-devel agl-demo agl-netboot agl-appfw-smack
+```
+
+#### Note:
+* **IMPORTANT** read the log to be sure to have any error during your setup.
+In case graphical drivers were not found, you could notice an error message as follow:
+
+```
+[snip]
+--- fragment /home/working/workspace_agl_master/meta-agl/templates/machine/h3ulcb/50_setup.sh
+/home/working/workspace_agl_master /home/working/workspace_agl_master/build_gen3
+The graphics and multimedia acceleration packages for the R-Car Gen3 board can be download from :
+ <http://www.renesas.com/secret/r_car_download/rcar_demoboard.jsp>
+
+These 2 files from there should be store in your'/home/ronan/Téléchargements' directory.
+ R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20160906.zip
+ R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20160906.zip
+/home/working/workspace_agl_master/build_gen3
+--- fragment /home/working/workspace_agl_master/meta-agl/templates/base/99_setup_EULAconf.sh
+--- end of setup script
+OK
+Generating setup file: /home/working/workspace_agl_master/build_gen3/agl-init-build-env ... OK
+------------ aglsetup.sh: Done
+[snip]
+```
+* If you encounters this issue, or any other unwanted behavior, you can fix the error mentioned and then clean up by removing the “$AGL_TOP/build” directory then launch the procedure again.
+* After this command, the working directory is changed to $AGL_TOP/build.
+* Users may want to check that the board is correctly selected in the environment:
+
+```
+grep -w -e "^MACHINE =" $AGL_TOP/build/conf/local.conf
+ MACHINE = "h3ulcb"
+or
+ MACHINE = "m3ulcb"
+```
+* Configure for Release or Development:
+Development images require extra tools for developer convenience, in particular:
+ * a debugger (gdb)
+ * some tweaks, including a disabled root password
+ * a SFTP server
+ * the TCF Agent for easier application deployment and remote debugging
+ * ...
+
+We explicitely activate these Debug facilities by specifying the “agl-devel agl-netboot” feature.
+
+### Build your image:
+The process to build an image is simple:
+```
+bitbake agl-demo-platform
+```
+Once done, what may take up to few hours, you should get the end result in the directory:
+```
+ls -l $AGL_TOP/build/tmp/deploy/images/$MACHINE
+```
+#### Note:
+* In case of failure of the build it is safe to first check that the Linux distribution chosen for your host has been validated for version 2.1 of Yocto.
+
+# Booting AGL Demo Platform on R-Car Starter Kit gen 3 using a micro-SD card
+To boot the board using a micro-SD card, there are two operations that should be done prior to first initial boot:
+* Create a SD-card with one ext3 partition,
+* Set up the board to boot on the SD-card.
+
+Then for each build, the SD-card is merely rewritten and used to boot the configured board.
+## Deployment
+
+### Format the SD-card on the host
+
+* Plug microSD card and get its associated device by either running *dmesg | tail -15* or *lsblk*, for example:
+
+```
+dmesg | tail -15
+
+ [ 1971.462160] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
+ [ 1971.462277] sd 6:0:0:0: [sdc] No Caching mode page found
+ [ 1971.462278] sd 6:0:0:0: [sdc] Assuming drive cache: write through
+ [ 1971.463870] sdc: sdc1 sdc2
+```
+Here, the SD-card is attached to the device sdc.
+
+```
+lsblk
+
+ NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
+ sda 8:0 0 167,7G 0 disk
+ ├─sda1 8:1 0 512M 0 part /boot/efi
+ ├─sda2 8:2 0 159,3G 0 part /
+ └─sda3 8:3 0 7,9G 0 part [SWAP]
+ sdb 8:16 0 931,5G 0 disk
+ └─sdb1 8:17 0 931,5G 0 part /media/storage
+ sdc 8:32 1 14,9G 0 disk
+ ├─sdc1 8:33 1 40M 0 part
+ └─sdc2 8:34 1 788M 0 part
+```
+#### Note:
+* **WARNING** This is a critical operation, each computer is different and device can change during time, so do this operation each time you incert the microSD card.
+* In the **example** above, we see the first SATA drive as 'sda'.
+* In the **example** above, 'sdc' corresponds to the microSD card.*
+
+### Format the SD-card
+* Create EXT3 partition on the SD-card using fdisk and set the MBR.
+ * For **example**, if the microSD card is */dev/sdc*:
+
+```
+sudo fdisk /dev/sdc
+
+ Welcome to fdisk (util-linux 2.27.1).
+ Changes will remain in memory only, until you decide to write them.
+ Be careful before using the write command.
+
+
+ Command (m for help): o
+ Created a new DOS disklabel with disk identifier 0x96e5850d.
+
+ Command (m for help): n
+ Partition type
+ p primary (0 primary, 0 extended, 4 free)
+ e extended (container for logical partitions)
+ Select (default p):
+
+ Using default response p.
+ Partition number (1-4, default 1):
+ First sector (2048-31291391, default 2048):
+ Last sector, +sectors or +size{K,M,G,T,P} (2048-31291391, default 31291391):
+
+ Created a new partition 1 of type 'Linux' and of size 14,9 GiB.
+
+ Command (m for help): w
+ The partition table has been altered.
+ Calling ioctl() to re-read partition table.
+ Syncing disks.
+```
+* Initialize the ext3 partition using “mke2fs”:
+ * for **example** if the microSD card is associated with *sdc*:
+
+```
+sudo mke2fs -t ext3 /dev/sdc1
+
+ mke2fs 1.42.13 (17-May-2015)
+ Creating filesystem with 3911168 4k blocks and 979200 inodes
+ Filesystem UUID: 690804b9-6c7d-4bbb-b1c1-e9357efabc52
+ Superblock backups stored on blocks:
+ 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208
+
+ Allocating group tables: done
+ Writing inode tables: done
+ Creating journal (32768 blocks): done
+ Writing superblocks and filesystem accounting information: done
+```
+
+### Copying the built image to the SD-card
+Insert the SD-card into your build host:
+* Your desktop system may probably offer a choice to mount the SD-card automatically in some directory.
+* In the next sample code, we'll suppose that the SD-card mount directory is stored in the variable $SDCARD.
+* For example **example** the microSD card is associated with device *sdc*:
+
+```
+export SDCARD=/tmp/agl
+mkdir -p $SDCARD
+sudo mount /dev/sdc1 $SDCARD
+```
+
+Go to your build directory:
+
+```
+cd $AGL_TOP/build/tmp/deploy/images/$MACHINE
+```
+
+Make sure the filesystem is empty:
+
+```
+sudo rm -rf ${SDCARD:-bad_dir}/*
+```
+*** IMPORTANT ***
+Verify that **tar** version is 1.28 or newer:
+
+```
+tar --version
+tar (GNU tar) 1.28
+[snip]
+```
+If your distribution is up to date on this dependency, you can use the host tool directly.
+Let's define a variable for the following steps:
+```
+TAR=$(which tar)
+```
+Otherwise, a native up-to-date version of tar is also generated while building AGL distribution:
+```
+TAR=$AGL_TOP/build/tmp/sysroots/x86_64-linux/usr/bin/tar-native/tar
+$TAR --version
+tar (GNU tar) 1.28
+[snip]
+```
+Copy Automotive Grade Linux (AGL) files onto the mircoSD card by extracting the root file system archive:
+
+```
+sudo $TAR --extract --numeric-owner --preserve-permissions --preserve-order --totals \
+ --xattrs-include='*' --directory=$SDCARD --file=agl-demo-platform-h3ulcb.tar.bz2
+```
+
+Copy Kernel Image and Device Tree Blob file into the **boot** directory:
+* For machine h3ulcb:
+```
+sudo cp Image-r8a7795-h3ulcb.dtb /tmp/agl/boot/
+```
+
+* For machine m3ulcb:
+```
+sudo cp Image-r8a7796-m3ulcb.dtb /tmp/agl/boot/
+```
+
+Ensure the changes have been written to the disk:
+
+```
+sync
+```
+ Unmount the micrSD card:
+
+```
+sudo umount $SDCARD
+```
+### Configure U-boot on the board
+* Turn the board on using the power switch.
+* Hit any key to stop autoboot (warning you have only few seconds).
+* Check if you have correct parameters for booting your board:
+ * For machine m3ulcb:
+```
+=> print
+ baudrate=115200
+ bootargs=console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait rw rootfstype=ext3
+ bootcmd=run load_ker; run load_dtb; booti 0x48080000 - 0x48000000
+ bootdelay=3
+ fdt_high=0xffffffffffffffff
+ initrd_high=0xffffffffffffffff
+ load_dtb=ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb
+ load_ker=ext4load mmc 0:1 0x48080000 /boot/Image
+ stderr=serial
+ stdin=serial
+ stdout=serial
+ ver=U-Boot 2015.04 (Jun 09 2016 - 19:21:52)
+
+ Environment size: 648/131068 bytes
+```
+
+ * For machine h3ulcb:
+```
+=> printenv
+ baudrate=115200
+ bootargs=console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait rw rootfstype=ext3
+ bootcmd=run load_ker; run load_dtb; booti 0x48080000 - 0x48000000
+ bootdelay=3
+ fdt_high=0xffffffffffffffff
+ filesize=cdeb
+ initrd_high=0xffffffffffffffff
+ load_dtb=ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb
+ load_ker=ext4load mmc 0:1 0x48080000 /boot/Image
+ stderr=serial
+ stdin=serial
+ stdout=serial
+ ver=U-Boot 2015.04 (Nov 30 2016 - 18:25:18)
+
+ Environment size: 557/131068 bytes
+```
+
+* If not copy line by line:
+
+```
+setenv bootargs console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait rw rootfstype=ext3
+setenv bootcmd run load_ker\; run load_dtb\; booti 0x48080000 - 0x48000000
+setenv load_ker ext4load mmc 0:1 0x48080000 /boot/Image
+saveenv
+```
+ * For machine h3ulcb:
+```
+setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb
+```
+ * For machine m3ulcb:
+```
+setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb
+```
+
+* Now you can boot:
+
+```
+run bootcmd
+```
+
+### Booting the board
+* Turn the board off using the power switch.
+* Insert the microSD-card.
+* Verify that you have plugged in, at least, the following:
+ * External monitor on HDMI port
+ * Input device (keyboard, mouse, touchscreen...) on USB port.
+
+* Turn the board on using the power switch.
+After a few seconds, you'll see the AGL splash screen on the display and you'll be able to log in on the console terminal.
+(login is 'root', no password)
+
+* For machine h3ulcb:
+
+```
+Automotive Grade Linux 3.0.0+snapshot-20161201 h3ulcb ttySC0
+
+h3ulcb login: root
+```
+
+* For machine m3ulcb:
+
+```
+Automotive Grade Linux 3.0.0+snapshot-20161201 m3ulcb ttySC0
+
+m3ulcb login: root
+```
+
+### To access the shell (serial)
+* Install a serial client on your computer.
+This can be “screen”, “picocom”, “minicom”.
+The lighter of the 3 is “picocom” (it has less dependencies).
+* Plug a USB cable from your computer to the serial CP2102 USB port (mini USB-A).
+With “dmesg” you can check the device created for the serial link.
+To get it, you must switch the board on.
+For example:
+```
+dmesg | tail
+[2097783.287091] usb 2-1.5.3: new full-speed USB device number 24 using ehci-pci
+[2097783.385857] usb 2-1.5.3: New USB device found, idVendor=0403, idProduct=6001
+[2097783.385862] usb 2-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[2097783.385864] usb 2-1.5.3: Product: FT232R USB UART
+[2097783.385866] usb 2-1.5.3: Manufacturer: FTDI
+[2097783.385867] usb 2-1.5.3: SerialNumber: AK04WWCE
+[2097783.388288] ftdi_sio 2-1.5.3:1.0: FTDI USB Serial Device converter detected
+[2097783.388330] usb 2-1.5.3: Detected FT232RL
+[2097783.388658] usb 2-1.5.3: FTDI USB Serial Device converter now attached to ttyUSB0
+```
+The link is attached to the device /dev/ttyUSB0.
+It is time to launch your serial client.
+Example:
+```
+picocom -b 38400 /dev/ttyUSB0
+```
+or
+```
+minicom -b 38400 -D /dev/ttyUSB0
+```
+or
+```
+screen /dev/ttyUSB0 38400
+```
+
+Power on the board to see a shell on the console
+* For machine h3ulcb:
+
+```
+NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.7
+NOTICE: BL2: PRR is R-Car H3 ES1.1
+NOTICE: BL2: LCM state is CM
+NOTICE: BL2: DDR1600(rev.0.15)
+NOTICE: BL2: DRAM Split is 4ch
+NOTICE: BL2: QoS is Gfx Oriented(rev.0.30)
+NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x52
+NOTICE: BL2: Lossy Decomp areas
+NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570
+NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0
+NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0
+NOTICE: BL2: v1.1(release):41099f4
+NOTICE: BL2: Built : 19:20:52, Jun 9 2016
+NOTICE: BL2: Normal boot
+NOTICE: BL2: dst=0xe63150c8 src=0x8180000 len=36(0x24)
+NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=3072(0xc00)
+NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
+NOTICE: BL2: dst=0x44100000 src=0x8200000 len=524288(0x80000)
+NOTICE: BL2: dst=0x49000000 src=0x8640000 len=1048576(0x100000)
+
+
+U-Boot 2015.04 (Jun 09 2016 - 19:21:52)
+
+CPU: Renesas Electronics R8A7795 rev 1.1
+Board: H3ULCB
+I2C: ready
+DRAM: 3.9 GiB
+MMC: sh-sdhi: 0, sh-sdhi: 1
+In: serial
+Out: serial
+Err: serial
+Net: Board Net Initialization Failed
+No ethernet found.
+Hit any key to stop autoboot: 0
+=>
+```
+* For machine m3ulcb:
+
+```
+NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.8
+NOTICE: BL2: PRR is R-Car M3 ES1.0
+NOTICE: BL2: LCM state is CM
+NOTICE: BL2: DDR1600(rev.0.15)
+NOTICE: BL2: DRAM Split is 2ch
+NOTICE: BL2: QoS is default setting(rev.0.14)
+NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x52
+NOTICE: BL2: Lossy Decomp areas
+NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570
+NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0
+NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0
+NOTICE: BL2: v1.1(release):41099f4
+NOTICE: BL2: Built : 09:24:53, Nov 24 2016
+NOTICE: BL2: Normal boot
+NOTICE: BL2: dst=0xe630f068 src=0x8180000 len=36(0x24)
+NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=3072(0xc00)
+NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
+NOTICE: BL2: dst=0x44100000 src=0x8200000 len=524288(0x80000)
+NOTICE: BL2: dst=0x49000000 src=0x8640000 len=1048576(0x100000)
+
+
+U-Boot 2015.04 (Nov 30 2016 - 18:25:18)
+
+CPU: Renesas Electronics R8A7796 rev 1.0
+Board: M3ULCB
+I2C: ready
+DRAM: 1.9 GiB
+MMC: sh-sdhi: 0, sh-sdhi: 1
+In: serial
+Out: serial
+Err: serial
+Net: Board Net Initialization Failed
+No ethernet found.
+Hit any key to stop autoboot: 0
+=>
+```
+
+### U-Boot screen configurations
+
+Follow the steps below to configure boot from microSD card and to set screen resolution:
+
+* Power up the board and, using your preferred terminal emulator.
+* Type a character to abort the boot and enter the U-boot menu.
+* Type **print** to check the environment:
+
+```
+print
+```
+
+* Verify that the ethaddr environment variable is set to the same MAC address value shown on the label on top of the RJ45 Ethernet connector.
+* If not please set it using the following command:
+
+```
+setenv ethaddr <MAC address>
+```
+
+For example:
+
+```
+setenv ethaddr 2e:09:0a:00:75:b5
+```
+
+* Set the follow environment variables:
+
+```
+setenv bootargs_console 'console=ttySC6,38400 ignore_loglevel'
+setenv bootargs_video 'vmalloc=384M video=HDMI-A-1:1920x1080-32@60'
+setenv bootargs_root 'root=/dev/mmcblk0p1 rootdelay=3 rw rootfstype=ext3 rootwait'
+setenv bootmmc '1:1'
+setenv bootcmd_sd 'ext4load mmc ${bootmmc} 0x40007fc0 boot/uImage+dtb'
+setenv bootcmd 'setenv bootargs ${bootargs_console} ${bootargs_video} ${bootargs_root}; run bootcmd_sd; bootm 0x40007fc0'
+```
+**WARNINGS:**
+* If no display shows up when booting, e.g. for a non-full HD screen, replace **1920x1080** value in the **bootargs_video** variable with lower screen resolution such as **1024x768**.
+ Unfortunately for the moment there are no universally supported setting.
+
+For Renesas h3ulcb use screen resolution **1024x768** and set **bootmmc** to **2:1**.
+
+* Save the environment variables:
+
+```
+saveenv
+ Saving Environment to SPI Flash...
+ SF: Detected S25FL512S with page size 256 KiB, total 64 MiB
+ Erasing SPI flash...Writing to SPI flash...done
+```
+
+* Reboot:
+
+```
+reset
+```
+
+### More Documentation
+Detailed guide on how to build AGL for Renesas boards and using AGL SDK inside a ready-to-use Docker container.
+* [AGL-Devkit-Build-your-1st-AGL-Application.pdf][Iot.bzh AGL-Devkit-Build-your-1st-AGL-Application]
+Generic guide on how to build various application types (HTML5, native, Qt, QML, …) for AGL.
+* [AGL-Devkit-HowTo_bake_a_service.pdf][Iot.bzh AGL_Phase2-Devkit-HowTo_bake_a_service]
+Generic guide on how to add a new service in the BSP.
+
+[R-car m3ulcb]: http://elinux.org/R-Car/Boards/M3SK
+[R-car h3ulcb]: http://elinux.org/R-Car/Boards/H3SK
+[R-car yocto]: http://elinux.org/R-Car/Boards/Yocto-Gen3
+[rcar demoboard]: https://www.renesas.com/en-eu/solutions/automotive/rcar-demoboard.html