diff options
Diffstat (limited to 'docs/getting-started/footers/raspberrypi-footer.md')
| -rw-r--r-- | docs/getting-started/footers/raspberrypi-footer.md | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/docs/getting-started/footers/raspberrypi-footer.md b/docs/getting-started/footers/raspberrypi-footer.md new file mode 100644 index 0000000..f5ff16f --- /dev/null +++ b/docs/getting-started/footers/raspberrypi-footer.md @@ -0,0 +1,56 @@ +# Commercial Licensed Packages + +Append to following lines to **conf/local.conf** to include libomxil under a commercial license to your build: + +```bash +# For libomxil +LICENSE_FLAGS_WHITELIST = "commercial" + +IMAGE_INSTALL_append = " libomxil" +``` + +# Raspberry Pi Touchscreen with Rotation + +If you have Raspberry Pi official 7" touchscreen connected, you can rotate it with these lines in /etc/xdg/weston/weston.ini + +```bash +root@raspberrypi3:/etc/xdg/weston# cat weston.ini +[core] +backend=drm-backend.so +shell=desktop-shell.so + +[shell] +locking=true +# Uncomment below to hide panel +#panel-location=none + +[launcher] +icon=/usr/share/weston/terminal.png +path=/usr/bin/weston-terminal + +[launcher] +icon=/usr/share/weston/icon_flower.png +path=/usr/bin/weston-flower + +[output] +name=DSI-1 +transform=270 +``` + +# Debugging + +It is possible to debug AGL images on Raspberry Pi using 3.3V USB to serial cable, such as [Olimex USB-Serial-Cable-F](https://www.olimex.com/Products/Components/Cables/USB-Serial-Cable/USB-Serial-Cable-F/), connected to the UART of the board. Follow the instructions below to connect a cable to the board (do it on your own risk, no warranty is provided): + +* Connect the BLUE wire if you are using Olimex USB-Serial-Cable-F to pin 6 of Raspberry Pi, +* Connect the RX line of the cable (GREEN wire if you are using Olimex USB-Serial-Cable-F) to pin 8 (TX line) of Raspberry Pi, +* Connect the TX line of the cable (RED wire if you are using Olimex USB-Serial-Cable-F) to pin 10 (RX line) of Raspberry Pi. + + + +* Plug the USB connector of the cable to your computer and use your favorite tool for serial communication, for example on Ubuntu and other Linux distributions you may use screen: + +```bash +sudo screen /dev/ttyUSB0 115200 +``` + +Pay attention that the colors of the cable may vary depending on the vendor. If you have USB console cable from Adafruit please have a look [here](https://learn.adafruit.com/adafruits-raspberry-pi-lesson-5-using-a-console-cable/connect-the-lead). |