diff options
Diffstat (limited to 'docs/getting-started')
| -rw-r--r-- | docs/getting-started/machines/intel.md | 199 |
1 files changed, 190 insertions, 9 deletions
diff --git a/docs/getting-started/machines/intel.md b/docs/getting-started/machines/intel.md index 4f2756b..3222793 100644 --- a/docs/getting-started/machines/intel.md +++ b/docs/getting-started/machines/intel.md @@ -6,7 +6,7 @@ to enable most 64-bit Intel Architecture (IA) platforms that use the 64-bit UEFI as the boot loader. In addition to the MinnowBoard, support for the [upCore & UpSquared boards](http://www.up-board.org/upsquared/) exists. -MinnowBoard Max and Turbot as well as Joule are both 64-bit capable. +MinnowBoard Max and Turbot are both 64-bit capable. If you are interested in creating ***applications*** to run on hardware booted using an image built with the AGL Project, see the following: @@ -14,13 +14,23 @@ using an image built with the AGL Project, see the following: * [Application Development Workflow](../app-workflow-intro.html/overview) * [Developing Apps for AGL](https://wiki.automotivelinux.org/agl-distro/developer_resources_intel_apps) -UEFI has significantly evolved and you will likely want to check that your hardware's +UEFI has significantly evolved and you should check that your hardware's firmware is up-to-date. -You should make this check for both the MinnowBoard-Max and the Joule platforms. -You do not need to make this check for the MinnowBoard-Turbo and Up platforms: +You must make this check for MinnowBoard-Max platforms. +You do not need to make this check for the MinnowBoard-Turbo, upCore, and UpSquared +platforms: * [`https://firmware.intel.com/projects/minnowboard-max`](https://firmware.intel.com/projects/minnowboard-max) -* [`https://software.intel.com/en-us/flashing-the-bios-on-joule`](https://software.intel.com/en-us/flashing-the-bios-on-joule) +* Intel automotive Module Reference Board (MRB) + + **NOTES:** By default, these MRBs ship with an Automotive + Fast Boot loader (ABL), which requires encrypted images. + You can ask Intel's "Engineering Sales support" for a special version + of the MRB that does not require an encrypted image. + You need this type of MRB in order to test AGL on the development board. + Contact your Intel technical support representative to get the non-signed + ABL firmware. + ## 1. Making Sure Your Build Environment is Correct @@ -88,12 +98,26 @@ See chapter 2 of [Porter QuickStart](http://iot.bzh/download/public/2016/sdk/AGL ## 3. Creating Bootable Media -Depending on your target hardware you will use an USB stick, an SD card or a HDD/SDD. +Typically, you use a USB stick, SD card, or HDD/SDD to create bootable media. +It is possible, however, to install the AGL image onto Embedded MultiMediaCard +(eMMC). +eMMC provides card longevity at a low cost and is used in automotive infotainment +systems, avionics displays, and industrial automation/HMI control applications +to name a few. + +### USB Stick, SD Card, and HDD/SDD + +Depending on your target hardware, use a USB stick, an SD card or an HDD/SDD. The creation process remains the same independently of the selected support. It does require to have access to a Linux machine with `sudo` or root password. -Create a bootable SD card with the script [mkefi-agl.sh](https://gerrit.automotivelinux.org/gerrit/gitweb?p=AGL/meta-agl.git;a=blob_plain;f=scripts/mkefi-agl.sh;hb=HEAD) -check the available options with the -v option. mkefi-agl.sh -v +Create a bootable SD card with the script [`mkefi-agl.sh`](https://gerrit.automotivelinux.org/gerrit/gitweb?p=AGL/meta-agl.git;a=blob_plain;f=scripts/mkefi-agl.sh;hb=HEAD). +Use the "-v" option to check the available options. + +**NOTE:** If you are using an Intel Module Reference Board (MRB), you need to +use the +[`mkabl-agl.sh`](https://gerrit.automotivelinux.org/gerrit/gitweb?p=AGL/meta-agl.git;a=blob_plain;f=scripts/mkefi-agl.sh;hb=HEAD) +script instead of the `mkefi-agl.sh` script. 1. **Insert Media Device:** Insert your removable media into the corresponding interface. @@ -131,9 +155,109 @@ check the available options with the -v option. mkefi-agl.sh -v # /dev/mmcblk0 is common for an integrated SD card reader in a notebook computer. ``` +### Embedded MultiMediaCard (eMMC) + +It is possible to install the AGL image directly on the internal eMMC +rather than a removable device such as a USB stick or SD card. +To do so, requires the following steps: + +1. **Add Required Tools to Your AGL Image:** + + Add a file named `site.conf` in your `build/conf` directory. + Make sure the file has the following content: + + ``` + INHERIT += "rm_work" + IMAGE_INSTALL_append = " linux-firmware-iwlwifi-7265d" + IMAGE_INSTALL_append = " parted e2fsprogs dosfstools" + IMAGE_INSTALL_append = " linux-firmware-i915 linux-firmware-ibt linux-firmware-iwlwifi-8000c" + ``` + In addition to the previous statements, you need to add the + Intel Wireless WiFi Link (`iwlifi`) driver for your own device + as needed. + +2. **Rebuild Your Image** + + Rebuild the AGL image by following the instructions in the + "[Using BitBake](./machines/intel.html#using-bitbake)" + step of this page. + +3. **Install the Rebuilt Image Onto a Removable Device** + + Follow the steps previously described here to copy the new + image onto a removable device such as a USB stick. + +4. **Copy the Image from the USB Stick to Your Build Host's Home Directory** + + Copy the image you just temporarily installed to the removable + device to your build host's home directory. + The process uses this image later for installation in the + eMMC. + For example, copy the image file created using the Yocto Project from + the build directory to your home directory: + + ```bash + $ cp build/tmp/deploy/images/intel-corei7-64/agl-demo-platform-intel-corei7-64.wic.xz ~/ + ``` + +5. **Boot the AGL Image from the Removable Device** + + You can see how to boot the image on the target device by + following the procedure in the next section. + +6. **Connect to Your Device that is Running the Image** + + You need to use a Serial Link or SSH to connect to the device running + your image. + +7. **Determine the eMMC Device Name** + + Be sure you know the name of the eMMC device. + Use the `lsblk` command. + +8. **Install the Image into the eMMC** + + Use the `mkefi-agl.sh` Script to install the image into the eMMC. + + ``` + cat /proc/partitions + ``` +9. **Remove the USB or SD Boot Device** + + Once your image is running on the booted device, you can remove the + media used to boot the hardware. + +10. **Reboot Your Device** + + Cycle through a reboot process and the device will boot from the + eMMC. + ## 4. Booting the Image on the Target Device -Follow these steps to boot your image on the target device: +Be aware of the following when booting your device: + +* Interrupting the boot process is easier to achieve when + using a USB keyboard as opposed to a serial link. + +* During the boot process, USB hubs are not supported. + You need to connect any USB keyboard directly to your device's + USB socket. + +* It is recommended that you use F9 to permanently change the boot + order rather than interrupt the process for each subsequent boot. + Also, you must have your bootable media plugged in or connected + to the target device before you can permanently change the boot + order. + +* Booting from an SD card is faster as compared to booting from + a USB stick. + Use an SD card for better boot performance. + +* The MinnowBoard, many laptops, and NUC devices do not accept + USB3 sticks during the boot process. + Be sure your image is not on a USB3 stick. + +Use these steps to boot your device: 1. Insert the bootable media that contains the AGL image into the target device. @@ -142,6 +266,9 @@ Follow these steps to boot your image on the target device: 3. As the device boots, access the boot option screen. You generally accomplish this with the F12 key during the power up operation. + **NOTE:** When booting a MinnowBoard, you can change the default boot + device by hitting F2 during initial UEFI boot. + 4. From the boot option screen, select your bootable media device. 5. Save and exit the screen and let the device boot from your media. @@ -152,3 +279,57 @@ Follow these steps to boot your image on the target device: It is common with USB sticks that you need to boot a couple of times. For Intel devices, the serial console is configured and activated at the rate of 115200 bps. + +## 5. Miscellaneous Information + +Following is information regarding serial debug ports, serial cables, and +port names for connected displays. + +### Serial Debug Port + +Serial debug port IDs vary across hardware platforms. +By default, when you build an AGL image for an Intel target such as the +Minnowboard, Module Reference Board (MRB), or Up board, the serial debug +ports are as follows: + +* MinnowBoard uses `/dev/ttyS0` +* MRB uses `/dev/ttyS2` +* Up boards the `/dev/ttyS0` serial port is difficult to access. + Using `/dev/ttyS4` is preferred, which is routed on the Arduino + connector. + See the [Up2 Pin Specification]( http://www.up-board.org/wp-content/uploads/2017/11/UP-Square-DatasheetV0.5.pdf) + for more information. + +Depending on your particular hardware, you might need to change the +configuration in your bootloader, which is located in the EFI partition. + +### Serial Debug Cable + +On the MinnowBoard, the serial debug cable is an FTDI serial cable. +You can learn more [here](https://minnowboard.org/tutorials/best-practice-serial-connection). + +Up Boards use the same FDDI 3.3V adapter as does the MinnowBoard. +However, the pin out is not adjacent and requires split pins. + +### Port Names and Connected Displays + +Port naming can change across hardware platforms and connected displays. +The simplest way to determine the port name used for a connected display +is to check the after the initial boot process completes. +You can make this check in the `systemd` journal as follows: + +```bash +$ journalctl | grep Output +``` + +**NOTE:** Output for the +[`journalctl`](https://www.freedesktop.org/software/systemd/man/journalctl.html) +command generates only when a real display is connected to the connector on the board. +The file holding that configuration is `/etc/xdg/weston/weston.ini`. + +Common Display names for Intel platforms are the following: + +* `HDMI-A-1` +* `HDMI-A-2` +* `LVDS-1` + |