Age | Commit message (Collapse) | Author | Files | Lines |
|
The test removing can module fail on DRA7 due to can_bcm using it.
This patchs handle this case.
Bug-AGL: SPEC-3064
Change-Id: I272e0ea62786fb43c4ea68601f2fb12864a279b6
Signed-off-by: Corentin LABBE <clabbe@baylibre.com>
|
|
|
|
The test remove can_dv module fail on H3 due to rcar_can using it.
This patchs handle this case.
Change-Id: I452a61813567ad09f3f819ce73c1c11753326514
Bug-AGL: SPEC-2996
Signed-off-by: Corentin LABBE <clabbe@baylibre.com>
|
|
BusyBox ip print its version stderr, so we need to redirect it to stdin.
Furthermore, using set -x reset the error code, we need to store it before.
Bug-AGL: SPEC-2996
Change-Id: I4b80475b0f9291fc55e661362a981ac14dbdb9b0
Signed-off-by: Corentin LABBE <clabbe@baylibre.com>
|
|
The CAN modules tests have lots of redundant code, let's add some
function for probing/removing modules.
Furthermore, some tests cannot work with busybox ip, I adds some tests
for it.
When reworking the tests, I have removed the "lsmod |grep can" tests
which was of no value.
I have also removed all sleep which was undocumented(probably for some
log flushing), if something need them I will re-add it with comment.
Bug-AGL: SPEC-2996
Change-Id: I2e8a109d799c58726d848814fd4c21a9fbd2eef5
Signed-off-by: Corentin LABBE <clabbe@baylibre.com>
|
|
Split the can tests in two, one for basic tests that doesn't need the
two can interfaces to be related, and the other one is for a board with
two related interfaces.
Modify the test_can_modules to be run on a board with only one can if at
least.
AGL-bug: SPEC-2878
Change-Id: I6f761458c3e191aa8000d19cb05b0592566cb6c9
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
|
|
To make sure that the can interface could be configured, we have to make
it dowm each time before the start of the config step.
Change-Id: I7bebea65072ffd822ee30241c68a0a89123b1576
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
|
|
At first to be able to configure the can interfaces, we had to use the libsocketcan,
but this lib should be used with canutils utilities, but a conflict happened between
the canutils and the can-utils, so I had to fix the tests to be able to use only
the can-utils utilities.
This link for a LAVA test job for these tests:
http://lava.baylibre.com:10080/scheduler/job/10883
Change-Id: I7b988496d6977d6d9d82f8f82b58520444dbc7d6
Signed-off-by: khouloud touil <ktouil@baylibre.com>
|
|
This commit for testing CAN modules, sending and receiving frames, showing stats and and testing suitable bitrates for transmission.
The "test_can_loopback_mode" test can be run on a board with one interface.
This test will fail gracfully if the board dosen't have any CAN interface.
The other tests needs to be run on a board with two CAN interfaces (e.g. dra7 with external transceiver.)
These tests requires two interfaces on the same board to send frames with the first interface and to receive them with the other one
These tests will fail gracfully by skiping all test cases if the board doesn't have two interfaces.
This link for the DRA7xx-EVM job : http://lava.baylibre.com:10080/scheduler/job/2860
This link for the AM335X-BONEBLACK (no CAN interface) : http://lava.baylibre.com:10080/scheduler/job/2862
Change-Id: I7d4c69f7817adbea8281d264cbbb7fa55571584e
Signed-off-by: khouloud touil <ktouil@baylibre.com>
|