Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 125 insertions, 0 deletions

diff --git a/roms/opensbi/lib/utils/serial/uart8250.c b/roms/opensbi/lib/utils/serial/uart8250.c
new file mode 100644
index 000000000..9635ba863
--- /dev/null
+++ b/roms/opensbi/lib/utils/serial/uart8250.c
@@ -0,0 +1,125 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2019 Western Digital Corporation or its affiliates.
+ *
+ * Authors:
+ *   Anup Patel <anup.patel@wdc.com>
+ */
+
+#include <sbi/riscv_io.h>
+#include <sbi_utils/serial/uart8250.h>
+
+/* clang-format off */
+
+#define UART_RBR_OFFSET		0	/* In:  Recieve Buffer Register */
+#define UART_THR_OFFSET		0	/* Out: Transmitter Holding Register */
+#define UART_DLL_OFFSET		0	/* Out: Divisor Latch Low */
+#define UART_IER_OFFSET		1	/* I/O: Interrupt Enable Register */
+#define UART_DLM_OFFSET		1	/* Out: Divisor Latch High */
+#define UART_FCR_OFFSET		2	/* Out: FIFO Control Register */
+#define UART_IIR_OFFSET		2	/* I/O: Interrupt Identification Register */
+#define UART_LCR_OFFSET		3	/* Out: Line Control Register */
+#define UART_MCR_OFFSET		4	/* Out: Modem Control Register */
+#define UART_LSR_OFFSET		5	/* In:  Line Status Register */
+#define UART_MSR_OFFSET		6	/* In:  Modem Status Register */
+#define UART_SCR_OFFSET		7	/* I/O: Scratch Register */
+#define UART_MDR1_OFFSET	8	/* I/O:  Mode Register */
+
+#define UART_LSR_FIFOE		0x80	/* Fifo error */
+#define UART_LSR_TEMT		0x40	/* Transmitter empty */
+#define UART_LSR_THRE		0x20	/* Transmit-hold-register empty */
+#define UART_LSR_BI		0x10	/* Break interrupt indicator */
+#define UART_LSR_FE		0x08	/* Frame error indicator */
+#define UART_LSR_PE		0x04	/* Parity error indicator */
+#define UART_LSR_OE		0x02	/* Overrun error indicator */
+#define UART_LSR_DR		0x01	/* Receiver data ready */
+#define UART_LSR_BRK_ERROR_BITS	0x1E	/* BI, FE, PE, OE bits */
+
+/* clang-format on */
+
+static volatile void *uart8250_base;
+static u32 uart8250_in_freq;
+static u32 uart8250_baudrate;
+static u32 uart8250_reg_width;
+static u32 uart8250_reg_shift;
+
+static u32 get_reg(u32 num)
+{
+	u32 offset = num << uart8250_reg_shift;
+
+	if (uart8250_reg_width == 1)
+		return readb(uart8250_base + offset);
+	else if (uart8250_reg_width == 2)
+		return readw(uart8250_base + offset);
+	else
+		return readl(uart8250_base + offset);
+}
+
+static void set_reg(u32 num, u32 val)
+{
+	u32 offset = num << uart8250_reg_shift;
+
+	if (uart8250_reg_width == 1)
+		writeb(val, uart8250_base + offset);
+	else if (uart8250_reg_width == 2)
+		writew(val, uart8250_base + offset);
+	else
+		writel(val, uart8250_base + offset);
+}
+
+void uart8250_putc(char ch)
+{
+	while ((get_reg(UART_LSR_OFFSET) & UART_LSR_THRE) == 0)
+		;
+
+	set_reg(UART_THR_OFFSET, ch);
+}
+
+int uart8250_getc(void)
+{
+	if (get_reg(UART_LSR_OFFSET) & UART_LSR_DR)
+		return get_reg(UART_RBR_OFFSET);
+	return -1;
+}
+
+int uart8250_init(unsigned long base, u32 in_freq, u32 baudrate, u32 reg_shift,
+		  u32 reg_width)
+{
+	u16 bdiv;
+
+	uart8250_base      = (volatile void *)base;
+	uart8250_reg_shift = reg_shift;
+	uart8250_reg_width = reg_width;
+	uart8250_in_freq   = in_freq;
+	uart8250_baudrate  = baudrate;
+
+	bdiv = uart8250_in_freq / (16 * uart8250_baudrate);
+
+	/* Disable all interrupts */
+	set_reg(UART_IER_OFFSET, 0x00);
+	/* Enable DLAB */
+	set_reg(UART_LCR_OFFSET, 0x80);
+
+	if (bdiv) {
+		/* Set divisor low byte */
+		set_reg(UART_DLL_OFFSET, bdiv & 0xff);
+		/* Set divisor high byte */
+		set_reg(UART_DLM_OFFSET, (bdiv >> 8) & 0xff);
+	}
+
+	/* 8 bits, no parity, one stop bit */
+	set_reg(UART_LCR_OFFSET, 0x03);
+	/* Enable FIFO */
+	set_reg(UART_FCR_OFFSET, 0x01);
+	/* No modem control DTR RTS */
+	set_reg(UART_MCR_OFFSET, 0x00);
+	/* Clear line status */
+	get_reg(UART_LSR_OFFSET);
+	/* Read receive buffer */
+	get_reg(UART_RBR_OFFSET);
+	/* Set scratchpad */
+	set_reg(UART_SCR_OFFSET, 0x00);
+
+	return 0;
+}