diff options
| author |   Angelos Mouzakitis <a.mouzakitis@virtualopensystems.com> | 2023-10-10 14:33:42 +0000 |
|---|---|---|
| committer | Angelos Mouzakitis <a.mouzakitis@virtualopensystems.com> | 2023-10-10 14:33:42 +0000 |
| commit | af1a266670d040d2f4083ff309d732d648afba2a (patch) | |
| tree | 2fc46203448ddcc6f81546d379abfaeb323575e9 /roms/skiboot/libstb/crypto/mbedtls/include | |
| parent | e02cda008591317b1625707ff8e115a4841aa889 (diff) | |
Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec
Diffstat (limited to 'roms/skiboot/libstb/crypto/mbedtls/include')
80 files changed, 34666 insertions, 0 deletions
diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/.gitignore b/roms/skiboot/libstb/crypto/mbedtls/include/.gitignore new file mode 100644 index 000000000..bf67d02ed --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/.gitignore @@ -0,0 +1,4 @@ +Makefile +*.sln +*.vcxproj +mbedtls/check_config diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/CMakeLists.txt b/roms/skiboot/libstb/crypto/mbedtls/include/CMakeLists.txt new file mode 100644 index 000000000..c2f2bd4e6 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/CMakeLists.txt @@ -0,0 +1,16 @@ +option(INSTALL_MBEDTLS_HEADERS "Install mbed TLS headers." ON) + +if(INSTALL_MBEDTLS_HEADERS) + + file(GLOB headers "mbedtls/*.h") + + install(FILES ${headers} + DESTINATION include/mbedtls + PERMISSIONS OWNER_READ OWNER_WRITE GROUP_READ WORLD_READ) + +endif(INSTALL_MBEDTLS_HEADERS) + +# Make config.h available in an out-of-source build. ssl-opt.sh requires it. +if (ENABLE_TESTING AND NOT ${CMAKE_CURRENT_BINARY_DIR} STREQUAL ${CMAKE_CURRENT_SOURCE_DIR}) + link_to_source(mbedtls) +endif() diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aes.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aes.h new file mode 100644 index 000000000..94e7282d3 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aes.h @@ -0,0 +1,674 @@ +/** + * \file aes.h + * + * \brief This file contains AES definitions and functions. + * + * The Advanced Encryption Standard (AES) specifies a FIPS-approved + * cryptographic algorithm that can be used to protect electronic + * data. + * + * The AES algorithm is a symmetric block cipher that can + * encrypt and decrypt information. For more information, see + * <em>FIPS Publication 197: Advanced Encryption Standard</em> and + * <em>ISO/IEC 18033-2:2006: Information technology -- Security + * techniques -- Encryption algorithms -- Part 2: Asymmetric + * ciphers</em>. + * + * The AES-XTS block mode is standardized by NIST SP 800-38E + * <https://nvlpubs.nist.gov/nistpubs/legacy/sp/nistspecialpublication800-38e.pdf> + * and described in detail by IEEE P1619 + * <https://ieeexplore.ieee.org/servlet/opac?punumber=4375278>. + */ + +/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved. + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_AES_H +#define MBEDTLS_AES_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +/* padlock.c and aesni.c rely on these values! */ +#define MBEDTLS_AES_ENCRYPT 1 /**< AES encryption. */ +#define MBEDTLS_AES_DECRYPT 0 /**< AES decryption. */ + +/* Error codes in range 0x0020-0x0022 */ +#define MBEDTLS_ERR_AES_INVALID_KEY_LENGTH -0x0020 /**< Invalid key length. */ +#define MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH -0x0022 /**< Invalid data input length. */ + +/* Error codes in range 0x0021-0x0025 */ +#define MBEDTLS_ERR_AES_BAD_INPUT_DATA -0x0021 /**< Invalid input data. */ + +/* MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE is deprecated and should not be used. */ +#define MBEDTLS_ERR_AES_FEATURE_UNAVAILABLE -0x0023 /**< Feature not available. For example, an unsupported AES key size. */ + +/* MBEDTLS_ERR_AES_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_AES_HW_ACCEL_FAILED -0x0025 /**< AES hardware accelerator failed. */ + +#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \ + !defined(inline) && !defined(__cplusplus) +#define inline __inline +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_AES_ALT) +// Regular implementation +// + +/** + * \brief The AES context-type definition. + */ +typedef struct mbedtls_aes_context +{ + int nr; /*!< The number of rounds. */ + uint32_t *rk; /*!< AES round keys. */ + uint32_t buf[68]; /*!< Unaligned data buffer. This buffer can + hold 32 extra Bytes, which can be used for + one of the following purposes: + <ul><li>Alignment if VIA padlock is + used.</li> + <li>Simplifying key expansion in the 256-bit + case by generating an extra round key. + </li></ul> */ +} +mbedtls_aes_context; + +#if defined(MBEDTLS_CIPHER_MODE_XTS) +/** + * \brief The AES XTS context-type definition. + */ +typedef struct mbedtls_aes_xts_context +{ + mbedtls_aes_context crypt; /*!< The AES context to use for AES block + encryption or decryption. */ + mbedtls_aes_context tweak; /*!< The AES context used for tweak + computation. */ +} mbedtls_aes_xts_context; +#endif /* MBEDTLS_CIPHER_MODE_XTS */ + +#else /* MBEDTLS_AES_ALT */ +#include "aes_alt.h" +#endif /* MBEDTLS_AES_ALT */ + +/** + * \brief This function initializes the specified AES context. + * + * It must be the first API called before using + * the context. + * + * \param ctx The AES context to initialize. This must not be \c NULL. + */ +void mbedtls_aes_init( mbedtls_aes_context *ctx ); + +/** + * \brief This function releases and clears the specified AES context. + * + * \param ctx The AES context to clear. + * If this is \c NULL, this function does nothing. + * Otherwise, the context must have been at least initialized. + */ +void mbedtls_aes_free( mbedtls_aes_context *ctx ); + +#if defined(MBEDTLS_CIPHER_MODE_XTS) +/** + * \brief This function initializes the specified AES XTS context. + * + * It must be the first API called before using + * the context. + * + * \param ctx The AES XTS context to initialize. This must not be \c NULL. + */ +void mbedtls_aes_xts_init( mbedtls_aes_xts_context *ctx ); + +/** + * \brief This function releases and clears the specified AES XTS context. + * + * \param ctx The AES XTS context to clear. + * If this is \c NULL, this function does nothing. + * Otherwise, the context must have been at least initialized. + */ +void mbedtls_aes_xts_free( mbedtls_aes_xts_context *ctx ); +#endif /* MBEDTLS_CIPHER_MODE_XTS */ + +/** + * \brief This function sets the encryption key. + * + * \param ctx The AES context to which the key should be bound. + * It must be initialized. + * \param key The encryption key. + * This must be a readable buffer of size \p keybits bits. + * \param keybits The size of data passed in bits. Valid options are: + * <ul><li>128 bits</li> + * <li>192 bits</li> + * <li>256 bits</li></ul> + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure. + */ +int mbedtls_aes_setkey_enc( mbedtls_aes_context *ctx, const unsigned char *key, + unsigned int keybits ); + +/** + * \brief This function sets the decryption key. + * + * \param ctx The AES context to which the key should be bound. + * It must be initialized. + * \param key The decryption key. + * This must be a readable buffer of size \p keybits bits. + * \param keybits The size of data passed. Valid options are: + * <ul><li>128 bits</li> + * <li>192 bits</li> + * <li>256 bits</li></ul> + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure. + */ +int mbedtls_aes_setkey_dec( mbedtls_aes_context *ctx, const unsigned char *key, + unsigned int keybits ); + +#if defined(MBEDTLS_CIPHER_MODE_XTS) +/** + * \brief This function prepares an XTS context for encryption and + * sets the encryption key. + * + * \param ctx The AES XTS context to which the key should be bound. + * It must be initialized. + * \param key The encryption key. This is comprised of the XTS key1 + * concatenated with the XTS key2. + * This must be a readable buffer of size \p keybits bits. + * \param keybits The size of \p key passed in bits. Valid options are: + * <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li> + * <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul> + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure. + */ +int mbedtls_aes_xts_setkey_enc( mbedtls_aes_xts_context *ctx, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief This function prepares an XTS context for decryption and + * sets the decryption key. + * + * \param ctx The AES XTS context to which the key should be bound. + * It must be initialized. + * \param key The decryption key. This is comprised of the XTS key1 + * concatenated with the XTS key2. + * This must be a readable buffer of size \p keybits bits. + * \param keybits The size of \p key passed in bits. Valid options are: + * <ul><li>256 bits (each of key1 and key2 is a 128-bit key)</li> + * <li>512 bits (each of key1 and key2 is a 256-bit key)</li></ul> + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_AES_INVALID_KEY_LENGTH on failure. + */ +int mbedtls_aes_xts_setkey_dec( mbedtls_aes_xts_context *ctx, + const unsigned char *key, + unsigned int keybits ); +#endif /* MBEDTLS_CIPHER_MODE_XTS */ + +/** + * \brief This function performs an AES single-block encryption or + * decryption operation. + * + * It performs the operation defined in the \p mode parameter + * (encrypt or decrypt), on the input data buffer defined in + * the \p input parameter. + * + * mbedtls_aes_init(), and either mbedtls_aes_setkey_enc() or + * mbedtls_aes_setkey_dec() must be called before the first + * call to this API with the same context. + * + * \param ctx The AES context to use for encryption or decryption. + * It must be initialized and bound to a key. + * \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or + * #MBEDTLS_AES_DECRYPT. + * \param input The buffer holding the input data. + * It must be readable and at least \c 16 Bytes long. + * \param output The buffer where the output data will be written. + * It must be writeable and at least \c 16 Bytes long. + + * \return \c 0 on success. + */ +int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx, + int mode, + const unsigned char input[16], + unsigned char output[16] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief This function performs an AES-CBC encryption or decryption operation + * on full blocks. + * + * It performs the operation defined in the \p mode + * parameter (encrypt/decrypt), on the input data buffer defined in + * the \p input parameter. + * + * It can be called as many times as needed, until all the input + * data is processed. mbedtls_aes_init(), and either + * mbedtls_aes_setkey_enc() or mbedtls_aes_setkey_dec() must be called + * before the first call to this API with the same context. + * + * \note This function operates on full blocks, that is, the input size + * must be a multiple of the AES block size of \c 16 Bytes. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the same function again on the next + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If you need to retain the contents of the IV, you should + * either save it manually or use the cipher module instead. + * + * + * \param ctx The AES context to use for encryption or decryption. + * It must be initialized and bound to a key. + * \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or + * #MBEDTLS_AES_DECRYPT. + * \param length The length of the input data in Bytes. This must be a + * multiple of the block size (\c 16 Bytes). + * \param iv Initialization vector (updated after use). + * It must be a readable and writeable buffer of \c 16 Bytes. + * \param input The buffer holding the input data. + * It must be readable and of size \p length Bytes. + * \param output The buffer holding the output data. + * It must be writeable and of size \p length Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH + * on failure. + */ +int mbedtls_aes_crypt_cbc( mbedtls_aes_context *ctx, + int mode, + size_t length, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +#if defined(MBEDTLS_CIPHER_MODE_XTS) +/** + * \brief This function performs an AES-XTS encryption or decryption + * operation for an entire XTS data unit. + * + * AES-XTS encrypts or decrypts blocks based on their location as + * defined by a data unit number. The data unit number must be + * provided by \p data_unit. + * + * NIST SP 800-38E limits the maximum size of a data unit to 2^20 + * AES blocks. If the data unit is larger than this, this function + * returns #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH. + * + * \param ctx The AES XTS context to use for AES XTS operations. + * It must be initialized and bound to a key. + * \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or + * #MBEDTLS_AES_DECRYPT. + * \param length The length of a data unit in Bytes. This can be any + * length between 16 bytes and 2^24 bytes inclusive + * (between 1 and 2^20 block cipher blocks). + * \param data_unit The address of the data unit encoded as an array of 16 + * bytes in little-endian format. For disk encryption, this + * is typically the index of the block device sector that + * contains the data. + * \param input The buffer holding the input data (which is an entire + * data unit). This function reads \p length Bytes from \p + * input. + * \param output The buffer holding the output data (which is an entire + * data unit). This function writes \p length Bytes to \p + * output. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH if \p length is + * smaller than an AES block in size (16 Bytes) or if \p + * length is larger than 2^20 blocks (16 MiB). + */ +int mbedtls_aes_crypt_xts( mbedtls_aes_xts_context *ctx, + int mode, + size_t length, + const unsigned char data_unit[16], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_XTS */ + +#if defined(MBEDTLS_CIPHER_MODE_CFB) +/** + * \brief This function performs an AES-CFB128 encryption or decryption + * operation. + * + * It performs the operation defined in the \p mode + * parameter (encrypt or decrypt), on the input data buffer + * defined in the \p input parameter. + * + * For CFB, you must set up the context with mbedtls_aes_setkey_enc(), + * regardless of whether you are performing an encryption or decryption + * operation, that is, regardless of the \p mode parameter. This is + * because CFB mode uses the same key schedule for encryption and + * decryption. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the same function again on the next + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If you need to retain the contents of the + * IV, you must either save it manually or use the cipher + * module instead. + * + * + * \param ctx The AES context to use for encryption or decryption. + * It must be initialized and bound to a key. + * \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or + * #MBEDTLS_AES_DECRYPT. + * \param length The length of the input data in Bytes. + * \param iv_off The offset in IV (updated after use). + * It must point to a valid \c size_t. + * \param iv The initialization vector (updated after use). + * It must be a readable and writeable buffer of \c 16 Bytes. + * \param input The buffer holding the input data. + * It must be readable and of size \p length Bytes. + * \param output The buffer holding the output data. + * It must be writeable and of size \p length Bytes. + * + * \return \c 0 on success. + */ +int mbedtls_aes_crypt_cfb128( mbedtls_aes_context *ctx, + int mode, + size_t length, + size_t *iv_off, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function performs an AES-CFB8 encryption or decryption + * operation. + * + * It performs the operation defined in the \p mode + * parameter (encrypt/decrypt), on the input data buffer defined + * in the \p input parameter. + * + * Due to the nature of CFB, you must use the same key schedule for + * both encryption and decryption operations. Therefore, you must + * use the context initialized with mbedtls_aes_setkey_enc() for + * both #MBEDTLS_AES_ENCRYPT and #MBEDTLS_AES_DECRYPT. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the same function again on the next + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * + * \param ctx The AES context to use for encryption or decryption. + * It must be initialized and bound to a key. + * \param mode The AES operation: #MBEDTLS_AES_ENCRYPT or + * #MBEDTLS_AES_DECRYPT + * \param length The length of the input data. + * \param iv The initialization vector (updated after use). + * It must be a readable and writeable buffer of \c 16 Bytes. + * \param input The buffer holding the input data. + * It must be readable and of size \p length Bytes. + * \param output The buffer holding the output data. + * It must be writeable and of size \p length Bytes. + * + * \return \c 0 on success. + */ +int mbedtls_aes_crypt_cfb8( mbedtls_aes_context *ctx, + int mode, + size_t length, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); +#endif /*MBEDTLS_CIPHER_MODE_CFB */ + +#if defined(MBEDTLS_CIPHER_MODE_OFB) +/** + * \brief This function performs an AES-OFB (Output Feedback Mode) + * encryption or decryption operation. + * + * For OFB, you must set up the context with + * mbedtls_aes_setkey_enc(), regardless of whether you are + * performing an encryption or decryption operation. This is + * because OFB mode uses the same key schedule for encryption and + * decryption. + * + * The OFB operation is identical for encryption or decryption, + * therefore no operation mode needs to be specified. + * + * \note Upon exit, the content of iv, the Initialisation Vector, is + * updated so that you can call the same function again on the next + * block(s) of data and get the same result as if it was encrypted + * in one call. This allows a "streaming" usage, by initialising + * iv_off to 0 before the first call, and preserving its value + * between calls. + * + * For non-streaming use, the iv should be initialised on each call + * to a unique value, and iv_off set to 0 on each call. + * + * If you need to retain the contents of the initialisation vector, + * you must either save it manually or use the cipher module + * instead. + * + * \warning For the OFB mode, the initialisation vector must be unique + * every encryption operation. Reuse of an initialisation vector + * will compromise security. + * + * \param ctx The AES context to use for encryption or decryption. + * It must be initialized and bound to a key. + * \param length The length of the input data. + * \param iv_off The offset in IV (updated after use). + * It must point to a valid \c size_t. + * \param iv The initialization vector (updated after use). + * It must be a readable and writeable buffer of \c 16 Bytes. + * \param input The buffer holding the input data. + * It must be readable and of size \p length Bytes. + * \param output The buffer holding the output data. + * It must be writeable and of size \p length Bytes. + * + * \return \c 0 on success. + */ +int mbedtls_aes_crypt_ofb( mbedtls_aes_context *ctx, + size_t length, + size_t *iv_off, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); + +#endif /* MBEDTLS_CIPHER_MODE_OFB */ + +#if defined(MBEDTLS_CIPHER_MODE_CTR) +/** + * \brief This function performs an AES-CTR encryption or decryption + * operation. + * + * This function performs the operation defined in the \p mode + * parameter (encrypt/decrypt), on the input data buffer + * defined in the \p input parameter. + * + * Due to the nature of CTR, you must use the same key schedule + * for both encryption and decryption operations. Therefore, you + * must use the context initialized with mbedtls_aes_setkey_enc() + * for both #MBEDTLS_AES_ENCRYPT and #MBEDTLS_AES_DECRYPT. + * + * \warning You must never reuse a nonce value with the same key. Doing so + * would void the encryption for the two messages encrypted with + * the same nonce and key. + * + * There are two common strategies for managing nonces with CTR: + * + * 1. You can handle everything as a single message processed over + * successive calls to this function. In that case, you want to + * set \p nonce_counter and \p nc_off to 0 for the first call, and + * then preserve the values of \p nonce_counter, \p nc_off and \p + * stream_block across calls to this function as they will be + * updated by this function. + * + * With this strategy, you must not encrypt more than 2**128 + * blocks of data with the same key. + * + * 2. You can encrypt separate messages by dividing the \p + * nonce_counter buffer in two areas: the first one used for a + * per-message nonce, handled by yourself, and the second one + * updated by this function internally. + * + * For example, you might reserve the first 12 bytes for the + * per-message nonce, and the last 4 bytes for internal use. In that + * case, before calling this function on a new message you need to + * set the first 12 bytes of \p nonce_counter to your chosen nonce + * value, the last 4 to 0, and \p nc_off to 0 (which will cause \p + * stream_block to be ignored). That way, you can encrypt at most + * 2**96 messages of up to 2**32 blocks each with the same key. + * + * The per-message nonce (or information sufficient to reconstruct + * it) needs to be communicated with the ciphertext and must be unique. + * The recommended way to ensure uniqueness is to use a message + * counter. An alternative is to generate random nonces, but this + * limits the number of messages that can be securely encrypted: + * for example, with 96-bit random nonces, you should not encrypt + * more than 2**32 messages with the same key. + * + * Note that for both stategies, sizes are measured in blocks and + * that an AES block is 16 bytes. + * + * \warning Upon return, \p stream_block contains sensitive data. Its + * content must not be written to insecure storage and should be + * securely discarded as soon as it's no longer needed. + * + * \param ctx The AES context to use for encryption or decryption. + * It must be initialized and bound to a key. + * \param length The length of the input data. + * \param nc_off The offset in the current \p stream_block, for + * resuming within the current cipher stream. The + * offset pointer should be 0 at the start of a stream. + * It must point to a valid \c size_t. + * \param nonce_counter The 128-bit nonce and counter. + * It must be a readable-writeable buffer of \c 16 Bytes. + * \param stream_block The saved stream block for resuming. This is + * overwritten by the function. + * It must be a readable-writeable buffer of \c 16 Bytes. + * \param input The buffer holding the input data. + * It must be readable and of size \p length Bytes. + * \param output The buffer holding the output data. + * It must be writeable and of size \p length Bytes. + * + * \return \c 0 on success. + */ +int mbedtls_aes_crypt_ctr( mbedtls_aes_context *ctx, + size_t length, + size_t *nc_off, + unsigned char nonce_counter[16], + unsigned char stream_block[16], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CTR */ + +/** + * \brief Internal AES block encryption function. This is only + * exposed to allow overriding it using + * \c MBEDTLS_AES_ENCRYPT_ALT. + * + * \param ctx The AES context to use for encryption. + * \param input The plaintext block. + * \param output The output (ciphertext) block. + * + * \return \c 0 on success. + */ +int mbedtls_internal_aes_encrypt( mbedtls_aes_context *ctx, + const unsigned char input[16], + unsigned char output[16] ); + +/** + * \brief Internal AES block decryption function. This is only + * exposed to allow overriding it using see + * \c MBEDTLS_AES_DECRYPT_ALT. + * + * \param ctx The AES context to use for decryption. + * \param input The ciphertext block. + * \param output The output (plaintext) block. + * + * \return \c 0 on success. + */ +int mbedtls_internal_aes_decrypt( mbedtls_aes_context *ctx, + const unsigned char input[16], + unsigned char output[16] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief Deprecated internal AES block encryption function + * without return value. + * + * \deprecated Superseded by mbedtls_internal_aes_encrypt() + * + * \param ctx The AES context to use for encryption. + * \param input Plaintext block. + * \param output Output (ciphertext) block. + */ +MBEDTLS_DEPRECATED void mbedtls_aes_encrypt( mbedtls_aes_context *ctx, + const unsigned char input[16], + unsigned char output[16] ); + +/** + * \brief Deprecated internal AES block decryption function + * without return value. + * + * \deprecated Superseded by mbedtls_internal_aes_decrypt() + * + * \param ctx The AES context to use for decryption. + * \param input Ciphertext block. + * \param output Output (plaintext) block. + */ +MBEDTLS_DEPRECATED void mbedtls_aes_decrypt( mbedtls_aes_context *ctx, + const unsigned char input[16], + unsigned char output[16] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief Checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_aes_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* aes.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aesni.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aesni.h new file mode 100644 index 000000000..a4ca012f8 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aesni.h @@ -0,0 +1,138 @@ +/** + * \file aesni.h + * + * \brief AES-NI for hardware AES acceleration on some Intel processors + * + * \warning These functions are only for internal use by other library + * functions; you must not call them directly. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_AESNI_H +#define MBEDTLS_AESNI_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "aes.h" + +#define MBEDTLS_AESNI_AES 0x02000000u +#define MBEDTLS_AESNI_CLMUL 0x00000002u + +#if defined(MBEDTLS_HAVE_ASM) && defined(__GNUC__) && \ + ( defined(__amd64__) || defined(__x86_64__) ) && \ + ! defined(MBEDTLS_HAVE_X86_64) +#define MBEDTLS_HAVE_X86_64 +#endif + +#if defined(MBEDTLS_HAVE_X86_64) + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Internal function to detect the AES-NI feature in CPUs. + * + * \note This function is only for internal use by other library + * functions; you must not call it directly. + * + * \param what The feature to detect + * (MBEDTLS_AESNI_AES or MBEDTLS_AESNI_CLMUL) + * + * \return 1 if CPU has support for the feature, 0 otherwise + */ +int mbedtls_aesni_has_support( unsigned int what ); + +/** + * \brief Internal AES-NI AES-ECB block encryption and decryption + * + * \note This function is only for internal use by other library + * functions; you must not call it directly. + * + * \param ctx AES context + * \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT + * \param input 16-byte input block + * \param output 16-byte output block + * + * \return 0 on success (cannot fail) + */ +int mbedtls_aesni_crypt_ecb( mbedtls_aes_context *ctx, + int mode, + const unsigned char input[16], + unsigned char output[16] ); + +/** + * \brief Internal GCM multiplication: c = a * b in GF(2^128) + * + * \note This function is only for internal use by other library + * functions; you must not call it directly. + * + * \param c Result + * \param a First operand + * \param b Second operand + * + * \note Both operands and result are bit strings interpreted as + * elements of GF(2^128) as per the GCM spec. + */ +void mbedtls_aesni_gcm_mult( unsigned char c[16], + const unsigned char a[16], + const unsigned char b[16] ); + +/** + * \brief Internal round key inversion. This function computes + * decryption round keys from the encryption round keys. + * + * \note This function is only for internal use by other library + * functions; you must not call it directly. + * + * \param invkey Round keys for the equivalent inverse cipher + * \param fwdkey Original round keys (for encryption) + * \param nr Number of rounds (that is, number of round keys minus one) + */ +void mbedtls_aesni_inverse_key( unsigned char *invkey, + const unsigned char *fwdkey, + int nr ); + +/** + * \brief Internal key expansion for encryption + * + * \note This function is only for internal use by other library + * functions; you must not call it directly. + * + * \param rk Destination buffer where the round keys are written + * \param key Encryption key + * \param bits Key size in bits (must be 128, 192 or 256) + * + * \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH + */ +int mbedtls_aesni_setkey_enc( unsigned char *rk, + const unsigned char *key, + size_t bits ); + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_HAVE_X86_64 */ + +#endif /* MBEDTLS_AESNI_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/arc4.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/arc4.h new file mode 100644 index 000000000..fb044d5b7 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/arc4.h @@ -0,0 +1,146 @@ +/** + * \file arc4.h + * + * \brief The ARCFOUR stream cipher + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers instead. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + * + */ +#ifndef MBEDTLS_ARC4_H +#define MBEDTLS_ARC4_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +/* MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED -0x0019 /**< ARC4 hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_ARC4_ALT) +// Regular implementation +// + +/** + * \brief ARC4 context structure + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers instead. + * + */ +typedef struct mbedtls_arc4_context +{ + int x; /*!< permutation index */ + int y; /*!< permutation index */ + unsigned char m[256]; /*!< permutation table */ +} +mbedtls_arc4_context; + +#else /* MBEDTLS_ARC4_ALT */ +#include "arc4_alt.h" +#endif /* MBEDTLS_ARC4_ALT */ + +/** + * \brief Initialize ARC4 context + * + * \param ctx ARC4 context to be initialized + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + * + */ +void mbedtls_arc4_init( mbedtls_arc4_context *ctx ); + +/** + * \brief Clear ARC4 context + * + * \param ctx ARC4 context to be cleared + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + * + */ +void mbedtls_arc4_free( mbedtls_arc4_context *ctx ); + +/** + * \brief ARC4 key schedule + * + * \param ctx ARC4 context to be setup + * \param key the secret key + * \param keylen length of the key, in bytes + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + * + */ +void mbedtls_arc4_setup( mbedtls_arc4_context *ctx, const unsigned char *key, + unsigned int keylen ); + +/** + * \brief ARC4 cipher function + * + * \param ctx ARC4 context + * \param length length of the input data + * \param input buffer holding the input data + * \param output buffer for the output data + * + * \return 0 if successful + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + * + */ +int mbedtls_arc4_crypt( mbedtls_arc4_context *ctx, size_t length, const unsigned char *input, + unsigned char *output ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + * + */ +int mbedtls_arc4_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* arc4.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aria.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aria.h new file mode 100644 index 000000000..1e8956ed1 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/aria.h @@ -0,0 +1,370 @@ +/** + * \file aria.h + * + * \brief ARIA block cipher + * + * The ARIA algorithm is a symmetric block cipher that can encrypt and + * decrypt information. It is defined by the Korean Agency for + * Technology and Standards (KATS) in <em>KS X 1213:2004</em> (in + * Korean, but see http://210.104.33.10/ARIA/index-e.html in English) + * and also described by the IETF in <em>RFC 5794</em>. + */ +/* Copyright (C) 2006-2018, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_ARIA_H +#define MBEDTLS_ARIA_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +#include "platform_util.h" + +#define MBEDTLS_ARIA_ENCRYPT 1 /**< ARIA encryption. */ +#define MBEDTLS_ARIA_DECRYPT 0 /**< ARIA decryption. */ + +#define MBEDTLS_ARIA_BLOCKSIZE 16 /**< ARIA block size in bytes. */ +#define MBEDTLS_ARIA_MAX_ROUNDS 16 /**< Maxiumum number of rounds in ARIA. */ +#define MBEDTLS_ARIA_MAX_KEYSIZE 32 /**< Maximum size of an ARIA key in bytes. */ + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#define MBEDTLS_ERR_ARIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x005C ) +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ +#define MBEDTLS_ERR_ARIA_BAD_INPUT_DATA -0x005C /**< Bad input data. */ + +#define MBEDTLS_ERR_ARIA_INVALID_INPUT_LENGTH -0x005E /**< Invalid data input length. */ + +/* MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE is deprecated and should not be used. + */ +#define MBEDTLS_ERR_ARIA_FEATURE_UNAVAILABLE -0x005A /**< Feature not available. For example, an unsupported ARIA key size. */ + +/* MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_ARIA_HW_ACCEL_FAILED -0x0058 /**< ARIA hardware accelerator failed. */ + +#if !defined(MBEDTLS_ARIA_ALT) +// Regular implementation +// + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The ARIA context-type definition. + */ +typedef struct mbedtls_aria_context +{ + unsigned char nr; /*!< The number of rounds (12, 14 or 16) */ + /*! The ARIA round keys. */ + uint32_t rk[MBEDTLS_ARIA_MAX_ROUNDS + 1][MBEDTLS_ARIA_BLOCKSIZE / 4]; +} +mbedtls_aria_context; + +#else /* MBEDTLS_ARIA_ALT */ +#include "aria_alt.h" +#endif /* MBEDTLS_ARIA_ALT */ + +/** + * \brief This function initializes the specified ARIA context. + * + * It must be the first API called before using + * the context. + * + * \param ctx The ARIA context to initialize. This must not be \c NULL. + */ +void mbedtls_aria_init( mbedtls_aria_context *ctx ); + +/** + * \brief This function releases and clears the specified ARIA context. + * + * \param ctx The ARIA context to clear. This may be \c NULL, in which + * case this function returns immediately. If it is not \c NULL, + * it must point to an initialized ARIA context. + */ +void mbedtls_aria_free( mbedtls_aria_context *ctx ); + +/** + * \brief This function sets the encryption key. + * + * \param ctx The ARIA context to which the key should be bound. + * This must be initialized. + * \param key The encryption key. This must be a readable buffer + * of size \p keybits Bits. + * \param keybits The size of \p key in Bits. Valid options are: + * <ul><li>128 bits</li> + * <li>192 bits</li> + * <li>256 bits</li></ul> + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_setkey_enc( mbedtls_aria_context *ctx, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief This function sets the decryption key. + * + * \param ctx The ARIA context to which the key should be bound. + * This must be initialized. + * \param key The decryption key. This must be a readable buffer + * of size \p keybits Bits. + * \param keybits The size of data passed. Valid options are: + * <ul><li>128 bits</li> + * <li>192 bits</li> + * <li>256 bits</li></ul> + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_setkey_dec( mbedtls_aria_context *ctx, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief This function performs an ARIA single-block encryption or + * decryption operation. + * + * It performs encryption or decryption (depending on whether + * the key was set for encryption on decryption) on the input + * data buffer defined in the \p input parameter. + * + * mbedtls_aria_init(), and either mbedtls_aria_setkey_enc() or + * mbedtls_aria_setkey_dec() must be called before the first + * call to this API with the same context. + * + * \param ctx The ARIA context to use for encryption or decryption. + * This must be initialized and bound to a key. + * \param input The 16-Byte buffer holding the input data. + * \param output The 16-Byte buffer holding the output data. + + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_crypt_ecb( mbedtls_aria_context *ctx, + const unsigned char input[MBEDTLS_ARIA_BLOCKSIZE], + unsigned char output[MBEDTLS_ARIA_BLOCKSIZE] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief This function performs an ARIA-CBC encryption or decryption operation + * on full blocks. + * + * It performs the operation defined in the \p mode + * parameter (encrypt/decrypt), on the input data buffer defined in + * the \p input parameter. + * + * It can be called as many times as needed, until all the input + * data is processed. mbedtls_aria_init(), and either + * mbedtls_aria_setkey_enc() or mbedtls_aria_setkey_dec() must be called + * before the first call to this API with the same context. + * + * \note This function operates on aligned blocks, that is, the input size + * must be a multiple of the ARIA block size of 16 Bytes. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the same function again on the next + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If you need to retain the contents of the IV, you should + * either save it manually or use the cipher module instead. + * + * + * \param ctx The ARIA context to use for encryption or decryption. + * This must be initialized and bound to a key. + * \param mode The mode of operation. This must be either + * #MBEDTLS_ARIA_ENCRYPT for encryption, or + * #MBEDTLS_ARIA_DECRYPT for decryption. + * \param length The length of the input data in Bytes. This must be a + * multiple of the block size (16 Bytes). + * \param iv Initialization vector (updated after use). + * This must be a readable buffer of size 16 Bytes. + * \param input The buffer holding the input data. This must + * be a readable buffer of length \p length Bytes. + * \param output The buffer holding the output data. This must + * be a writable buffer of length \p length Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_crypt_cbc( mbedtls_aria_context *ctx, + int mode, + size_t length, + unsigned char iv[MBEDTLS_ARIA_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +#if defined(MBEDTLS_CIPHER_MODE_CFB) +/** + * \brief This function performs an ARIA-CFB128 encryption or decryption + * operation. + * + * It performs the operation defined in the \p mode + * parameter (encrypt or decrypt), on the input data buffer + * defined in the \p input parameter. + * + * For CFB, you must set up the context with mbedtls_aria_setkey_enc(), + * regardless of whether you are performing an encryption or decryption + * operation, that is, regardless of the \p mode parameter. This is + * because CFB mode uses the same key schedule for encryption and + * decryption. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the same function again on the next + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If you need to retain the contents of the + * IV, you must either save it manually or use the cipher + * module instead. + * + * + * \param ctx The ARIA context to use for encryption or decryption. + * This must be initialized and bound to a key. + * \param mode The mode of operation. This must be either + * #MBEDTLS_ARIA_ENCRYPT for encryption, or + * #MBEDTLS_ARIA_DECRYPT for decryption. + * \param length The length of the input data \p input in Bytes. + * \param iv_off The offset in IV (updated after use). + * This must not be larger than 15. + * \param iv The initialization vector (updated after use). + * This must be a readable buffer of size 16 Bytes. + * \param input The buffer holding the input data. This must + * be a readable buffer of length \p length Bytes. + * \param output The buffer holding the output data. This must + * be a writable buffer of length \p length Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_crypt_cfb128( mbedtls_aria_context *ctx, + int mode, + size_t length, + size_t *iv_off, + unsigned char iv[MBEDTLS_ARIA_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CFB */ + +#if defined(MBEDTLS_CIPHER_MODE_CTR) +/** + * \brief This function performs an ARIA-CTR encryption or decryption + * operation. + * + * This function performs the operation defined in the \p mode + * parameter (encrypt/decrypt), on the input data buffer + * defined in the \p input parameter. + * + * Due to the nature of CTR, you must use the same key schedule + * for both encryption and decryption operations. Therefore, you + * must use the context initialized with mbedtls_aria_setkey_enc() + * for both #MBEDTLS_ARIA_ENCRYPT and #MBEDTLS_ARIA_DECRYPT. + * + * \warning You must never reuse a nonce value with the same key. Doing so + * would void the encryption for the two messages encrypted with + * the same nonce and key. + * + * There are two common strategies for managing nonces with CTR: + * + * 1. You can handle everything as a single message processed over + * successive calls to this function. In that case, you want to + * set \p nonce_counter and \p nc_off to 0 for the first call, and + * then preserve the values of \p nonce_counter, \p nc_off and \p + * stream_block across calls to this function as they will be + * updated by this function. + * + * With this strategy, you must not encrypt more than 2**128 + * blocks of data with the same key. + * + * 2. You can encrypt separate messages by dividing the \p + * nonce_counter buffer in two areas: the first one used for a + * per-message nonce, handled by yourself, and the second one + * updated by this function internally. + * + * For example, you might reserve the first 12 bytes for the + * per-message nonce, and the last 4 bytes for internal use. In that + * case, before calling this function on a new message you need to + * set the first 12 bytes of \p nonce_counter to your chosen nonce + * value, the last 4 to 0, and \p nc_off to 0 (which will cause \p + * stream_block to be ignored). That way, you can encrypt at most + * 2**96 messages of up to 2**32 blocks each with the same key. + * + * The per-message nonce (or information sufficient to reconstruct + * it) needs to be communicated with the ciphertext and must be unique. + * The recommended way to ensure uniqueness is to use a message + * counter. An alternative is to generate random nonces, but this + * limits the number of messages that can be securely encrypted: + * for example, with 96-bit random nonces, you should not encrypt + * more than 2**32 messages with the same key. + * + * Note that for both stategies, sizes are measured in blocks and + * that an ARIA block is 16 bytes. + * + * \warning Upon return, \p stream_block contains sensitive data. Its + * content must not be written to insecure storage and should be + * securely discarded as soon as it's no longer needed. + * + * \param ctx The ARIA context to use for encryption or decryption. + * This must be initialized and bound to a key. + * \param length The length of the input data \p input in Bytes. + * \param nc_off The offset in Bytes in the current \p stream_block, + * for resuming within the current cipher stream. The + * offset pointer should be \c 0 at the start of a + * stream. This must not be larger than \c 15 Bytes. + * \param nonce_counter The 128-bit nonce and counter. This must point to + * a read/write buffer of length \c 16 bytes. + * \param stream_block The saved stream block for resuming. This must + * point to a read/write buffer of length \c 16 bytes. + * This is overwritten by the function. + * \param input The buffer holding the input data. This must + * be a readable buffer of length \p length Bytes. + * \param output The buffer holding the output data. This must + * be a writable buffer of length \p length Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_aria_crypt_ctr( mbedtls_aria_context *ctx, + size_t length, + size_t *nc_off, + unsigned char nonce_counter[MBEDTLS_ARIA_BLOCKSIZE], + unsigned char stream_block[MBEDTLS_ARIA_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CTR */ + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief Checkup routine. + * + * \return \c 0 on success, or \c 1 on failure. + */ +int mbedtls_aria_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* aria.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/asn1.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/asn1.h new file mode 100644 index 000000000..96c1c9a8a --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/asn1.h @@ -0,0 +1,358 @@ +/** + * \file asn1.h + * + * \brief Generic ASN.1 parsing + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_ASN1_H +#define MBEDTLS_ASN1_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +#if defined(MBEDTLS_BIGNUM_C) +#include "bignum.h" +#endif + +/** + * \addtogroup asn1_module + * \{ + */ + +/** + * \name ASN1 Error codes + * These error codes are OR'ed to X509 error codes for + * higher error granularity. + * ASN1 is a standard to specify data structures. + * \{ + */ +#define MBEDTLS_ERR_ASN1_OUT_OF_DATA -0x0060 /**< Out of data when parsing an ASN1 data structure. */ +#define MBEDTLS_ERR_ASN1_UNEXPECTED_TAG -0x0062 /**< ASN1 tag was of an unexpected value. */ +#define MBEDTLS_ERR_ASN1_INVALID_LENGTH -0x0064 /**< Error when trying to determine the length or invalid length. */ +#define MBEDTLS_ERR_ASN1_LENGTH_MISMATCH -0x0066 /**< Actual length differs from expected length. */ +#define MBEDTLS_ERR_ASN1_INVALID_DATA -0x0068 /**< Data is invalid. (not used) */ +#define MBEDTLS_ERR_ASN1_ALLOC_FAILED -0x006A /**< Memory allocation failed */ +#define MBEDTLS_ERR_ASN1_BUF_TOO_SMALL -0x006C /**< Buffer too small when writing ASN.1 data structure. */ + +/* \} name */ + +/** + * \name DER constants + * These constants comply with the DER encoded ASN.1 type tags. + * DER encoding uses hexadecimal representation. + * An example DER sequence is:\n + * - 0x02 -- tag indicating INTEGER + * - 0x01 -- length in octets + * - 0x05 -- value + * Such sequences are typically read into \c ::mbedtls_x509_buf. + * \{ + */ +#define MBEDTLS_ASN1_BOOLEAN 0x01 +#define MBEDTLS_ASN1_INTEGER 0x02 +#define MBEDTLS_ASN1_BIT_STRING 0x03 +#define MBEDTLS_ASN1_OCTET_STRING 0x04 +#define MBEDTLS_ASN1_NULL 0x05 +#define MBEDTLS_ASN1_OID 0x06 +#define MBEDTLS_ASN1_UTF8_STRING 0x0C +#define MBEDTLS_ASN1_SEQUENCE 0x10 +#define MBEDTLS_ASN1_SET 0x11 +#define MBEDTLS_ASN1_PRINTABLE_STRING 0x13 +#define MBEDTLS_ASN1_T61_STRING 0x14 +#define MBEDTLS_ASN1_IA5_STRING 0x16 +#define MBEDTLS_ASN1_UTC_TIME 0x17 +#define MBEDTLS_ASN1_GENERALIZED_TIME 0x18 +#define MBEDTLS_ASN1_UNIVERSAL_STRING 0x1C +#define MBEDTLS_ASN1_BMP_STRING 0x1E +#define MBEDTLS_ASN1_PRIMITIVE 0x00 +#define MBEDTLS_ASN1_CONSTRUCTED 0x20 +#define MBEDTLS_ASN1_CONTEXT_SPECIFIC 0x80 + +/* + * Bit masks for each of the components of an ASN.1 tag as specified in + * ITU X.690 (08/2015), section 8.1 "General rules for encoding", + * paragraph 8.1.2.2: + * + * Bit 8 7 6 5 1 + * +-------+-----+------------+ + * | Class | P/C | Tag number | + * +-------+-----+------------+ + */ +#define MBEDTLS_ASN1_TAG_CLASS_MASK 0xC0 +#define MBEDTLS_ASN1_TAG_PC_MASK 0x20 +#define MBEDTLS_ASN1_TAG_VALUE_MASK 0x1F + +/* \} name */ +/* \} addtogroup asn1_module */ + +/** Returns the size of the binary string, without the trailing \\0 */ +#define MBEDTLS_OID_SIZE(x) (sizeof(x) - 1) + +/** + * Compares an mbedtls_asn1_buf structure to a reference OID. + * + * Only works for 'defined' oid_str values (MBEDTLS_OID_HMAC_SHA1), you cannot use a + * 'unsigned char *oid' here! + */ +#define MBEDTLS_OID_CMP(oid_str, oid_buf) \ + ( ( MBEDTLS_OID_SIZE(oid_str) != (oid_buf)->len ) || \ + memcmp( (oid_str), (oid_buf)->p, (oid_buf)->len) != 0 ) + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \name Functions to parse ASN.1 data structures + * \{ + */ + +/** + * Type-length-value structure that allows for ASN1 using DER. + */ +typedef struct mbedtls_asn1_buf +{ + int tag; /**< ASN1 type, e.g. MBEDTLS_ASN1_UTF8_STRING. */ + size_t len; /**< ASN1 length, in octets. */ + unsigned char *p; /**< ASN1 data, e.g. in ASCII. */ +} +mbedtls_asn1_buf; + +/** + * Container for ASN1 bit strings. + */ +typedef struct mbedtls_asn1_bitstring +{ + size_t len; /**< ASN1 length, in octets. */ + unsigned char unused_bits; /**< Number of unused bits at the end of the string */ + unsigned char *p; /**< Raw ASN1 data for the bit string */ +} +mbedtls_asn1_bitstring; + +/** + * Container for a sequence of ASN.1 items + */ +typedef struct mbedtls_asn1_sequence +{ + mbedtls_asn1_buf buf; /**< Buffer containing the given ASN.1 item. */ + struct mbedtls_asn1_sequence *next; /**< The next entry in the sequence. */ +} +mbedtls_asn1_sequence; + +/** + * Container for a sequence or list of 'named' ASN.1 data items + */ +typedef struct mbedtls_asn1_named_data +{ + mbedtls_asn1_buf oid; /**< The object identifier. */ + mbedtls_asn1_buf val; /**< The named value. */ + struct mbedtls_asn1_named_data *next; /**< The next entry in the sequence. */ + unsigned char next_merged; /**< Merge next item into the current one? */ +} +mbedtls_asn1_named_data; + +/** + * \brief Get the length of an ASN.1 element. + * Updates the pointer to immediately behind the length. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param len The variable that will receive the value + * + * \return 0 if successful, MBEDTLS_ERR_ASN1_OUT_OF_DATA on reaching + * end of data, MBEDTLS_ERR_ASN1_INVALID_LENGTH if length is + * unparseable. + */ +int mbedtls_asn1_get_len( unsigned char **p, + const unsigned char *end, + size_t *len ); + +/** + * \brief Get the tag and length of the tag. Check for the requested tag. + * Updates the pointer to immediately behind the tag and length. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param len The variable that will receive the length + * \param tag The expected tag + * + * \return 0 if successful, MBEDTLS_ERR_ASN1_UNEXPECTED_TAG if tag did + * not match requested tag, or another specific ASN.1 error code. + */ +int mbedtls_asn1_get_tag( unsigned char **p, + const unsigned char *end, + size_t *len, int tag ); + +/** + * \brief Retrieve a boolean ASN.1 tag and its value. + * Updates the pointer to immediately behind the full tag. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param val The variable that will receive the value + * + * \return 0 if successful or a specific ASN.1 error code. + */ +int mbedtls_asn1_get_bool( unsigned char **p, + const unsigned char *end, + int *val ); + +/** + * \brief Retrieve an integer ASN.1 tag and its value. + * Updates the pointer to immediately behind the full tag. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param val The variable that will receive the value + * + * \return 0 if successful or a specific ASN.1 error code. + */ +int mbedtls_asn1_get_int( unsigned char **p, + const unsigned char *end, + int *val ); + +/** + * \brief Retrieve a bitstring ASN.1 tag and its value. + * Updates the pointer to immediately behind the full tag. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param bs The variable that will receive the value + * + * \return 0 if successful or a specific ASN.1 error code. + */ +int mbedtls_asn1_get_bitstring( unsigned char **p, const unsigned char *end, + mbedtls_asn1_bitstring *bs); + +/** + * \brief Retrieve a bitstring ASN.1 tag without unused bits and its + * value. + * Updates the pointer to the beginning of the bit/octet string. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param len Length of the actual bit/octect string in bytes + * + * \return 0 if successful or a specific ASN.1 error code. + */ +int mbedtls_asn1_get_bitstring_null( unsigned char **p, const unsigned char *end, + size_t *len ); + +/** + * \brief Parses and splits an ASN.1 "SEQUENCE OF <tag>" + * Updated the pointer to immediately behind the full sequence tag. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param cur First variable in the chain to fill + * \param tag Type of sequence + * + * \return 0 if successful or a specific ASN.1 error code. + */ +int mbedtls_asn1_get_sequence_of( unsigned char **p, + const unsigned char *end, + mbedtls_asn1_sequence *cur, + int tag); + +#if defined(MBEDTLS_BIGNUM_C) +/** + * \brief Retrieve a MPI value from an integer ASN.1 tag. + * Updates the pointer to immediately behind the full tag. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param X The MPI that will receive the value + * + * \return 0 if successful or a specific ASN.1 or MPI error code. + */ +int mbedtls_asn1_get_mpi( unsigned char **p, + const unsigned char *end, + mbedtls_mpi *X ); +#endif /* MBEDTLS_BIGNUM_C */ + +/** + * \brief Retrieve an AlgorithmIdentifier ASN.1 sequence. + * Updates the pointer to immediately behind the full + * AlgorithmIdentifier. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param alg The buffer to receive the OID + * \param params The buffer to receive the params (if any) + * + * \return 0 if successful or a specific ASN.1 or MPI error code. + */ +int mbedtls_asn1_get_alg( unsigned char **p, + const unsigned char *end, + mbedtls_asn1_buf *alg, mbedtls_asn1_buf *params ); + +/** + * \brief Retrieve an AlgorithmIdentifier ASN.1 sequence with NULL or no + * params. + * Updates the pointer to immediately behind the full + * AlgorithmIdentifier. + * + * \param p The position in the ASN.1 data + * \param end End of data + * \param alg The buffer to receive the OID + * + * \return 0 if successful or a specific ASN.1 or MPI error code. + */ +int mbedtls_asn1_get_alg_null( unsigned char **p, + const unsigned char *end, + mbedtls_asn1_buf *alg ); + +/** + * \brief Find a specific named_data entry in a sequence or list based on + * the OID. + * + * \param list The list to seek through + * \param oid The OID to look for + * \param len Size of the OID + * + * \return NULL if not found, or a pointer to the existing entry. + */ +mbedtls_asn1_named_data *mbedtls_asn1_find_named_data( mbedtls_asn1_named_data *list, + const char *oid, size_t len ); + +/** + * \brief Free a mbedtls_asn1_named_data entry + * + * \param entry The named data entry to free + */ +void mbedtls_asn1_free_named_data( mbedtls_asn1_named_data *entry ); + +/** + * \brief Free all entries in a mbedtls_asn1_named_data list + * Head will be set to NULL + * + * \param head Pointer to the head of the list of named data entries to free + */ +void mbedtls_asn1_free_named_data_list( mbedtls_asn1_named_data **head ); + +#ifdef __cplusplus +} +#endif + +#endif /* asn1.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/asn1write.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/asn1write.h new file mode 100644 index 000000000..a19424369 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/asn1write.h @@ -0,0 +1,329 @@ +/** + * \file asn1write.h + * + * \brief ASN.1 buffer writing functionality + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_ASN1_WRITE_H +#define MBEDTLS_ASN1_WRITE_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "asn1.h" + +#define MBEDTLS_ASN1_CHK_ADD(g, f) \ + do \ + { \ + if( ( ret = (f) ) < 0 ) \ + return( ret ); \ + else \ + (g) += ret; \ + } while( 0 ) + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Write a length field in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param len The length value to write. + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_len( unsigned char **p, unsigned char *start, + size_t len ); +/** + * \brief Write an ASN.1 tag in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param tag The tag to write. + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_tag( unsigned char **p, unsigned char *start, + unsigned char tag ); + +/** + * \brief Write raw buffer data. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param buf The data buffer to write. + * \param size The length of the data buffer. + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_raw_buffer( unsigned char **p, unsigned char *start, + const unsigned char *buf, size_t size ); + +#if defined(MBEDTLS_BIGNUM_C) +/** + * \brief Write a arbitrary-precision number (#MBEDTLS_ASN1_INTEGER) + * in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param X The MPI to write. + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_mpi( unsigned char **p, unsigned char *start, + const mbedtls_mpi *X ); +#endif /* MBEDTLS_BIGNUM_C */ + +/** + * \brief Write a NULL tag (#MBEDTLS_ASN1_NULL) with zero data + * in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_null( unsigned char **p, unsigned char *start ); + +/** + * \brief Write an OID tag (#MBEDTLS_ASN1_OID) and data + * in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param oid The OID to write. + * \param oid_len The length of the OID. + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_oid( unsigned char **p, unsigned char *start, + const char *oid, size_t oid_len ); + +/** + * \brief Write an AlgorithmIdentifier sequence in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param oid The OID of the algorithm to write. + * \param oid_len The length of the algorithm's OID. + * \param par_len The length of the parameters, which must be already written. + * If 0, NULL parameters are added + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_algorithm_identifier( unsigned char **p, + unsigned char *start, + const char *oid, size_t oid_len, + size_t par_len ); + +/** + * \brief Write a boolean tag (#MBEDTLS_ASN1_BOOLEAN) and value + * in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param boolean The boolean value to write, either \c 0 or \c 1. + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_bool( unsigned char **p, unsigned char *start, + int boolean ); + +/** + * \brief Write an int tag (#MBEDTLS_ASN1_INTEGER) and value + * in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param val The integer value to write. + * + * \return The number of bytes written to \p p on success. + * \return A negative \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_asn1_write_int( unsigned char **p, unsigned char *start, int val ); + +/** + * \brief Write a string in ASN.1 format using a specific + * string encoding tag. + + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param tag The string encoding tag to write, e.g. + * #MBEDTLS_ASN1_UTF8_STRING. + * \param text The string to write. + * \param text_len The length of \p text in bytes (which might + * be strictly larger than the number of characters). + * + * \return The number of bytes written to \p p on success. + * \return A negative error code on failure. + */ +int mbedtls_asn1_write_tagged_string( unsigned char **p, unsigned char *start, + int tag, const char *text, + size_t text_len ); + +/** + * \brief Write a string in ASN.1 format using the PrintableString + * string encoding tag (#MBEDTLS_ASN1_PRINTABLE_STRING). + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param text The string to write. + * \param text_len The length of \p text in bytes (which might + * be strictly larger than the number of characters). + * + * \return The number of bytes written to \p p on success. + * \return A negative error code on failure. + */ +int mbedtls_asn1_write_printable_string( unsigned char **p, + unsigned char *start, + const char *text, size_t text_len ); + +/** + * \brief Write a UTF8 string in ASN.1 format using the UTF8String + * string encoding tag (#MBEDTLS_ASN1_PRINTABLE_STRING). + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param text The string to write. + * \param text_len The length of \p text in bytes (which might + * be strictly larger than the number of characters). + * + * \return The number of bytes written to \p p on success. + * \return A negative error code on failure. + */ +int mbedtls_asn1_write_utf8_string( unsigned char **p, unsigned char *start, + const char *text, size_t text_len ); + +/** + * \brief Write a string in ASN.1 format using the IA5String + * string encoding tag (#MBEDTLS_ASN1_IA5_STRING). + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param text The string to write. + * \param text_len The length of \p text in bytes (which might + * be strictly larger than the number of characters). + * + * \return The number of bytes written to \p p on success. + * \return A negative error code on failure. + */ +int mbedtls_asn1_write_ia5_string( unsigned char **p, unsigned char *start, + const char *text, size_t text_len ); + +/** + * \brief Write a bitstring tag (#MBEDTLS_ASN1_BIT_STRING) and + * value in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param buf The bitstring to write. + * \param bits The total number of bits in the bitstring. + * + * \return The number of bytes written to \p p on success. + * \return A negative error code on failure. + */ +int mbedtls_asn1_write_bitstring( unsigned char **p, unsigned char *start, + const unsigned char *buf, size_t bits ); + +/** + * \brief Write an octet string tag (#MBEDTLS_ASN1_OCTET_STRING) + * and value in ASN.1 format. + * + * \note This function works backwards in data buffer. + * + * \param p The reference to the current position pointer. + * \param start The start of the buffer, for bounds-checking. + * \param buf The buffer holding the data to write. + * \param size The length of the data buffer \p buf. + * + * \return The number of bytes written to \p p on success. + * \return A negative error code on failure. + */ +int mbedtls_asn1_write_octet_string( unsigned char **p, unsigned char *start, + const unsigned char *buf, size_t size ); + +/** + * \brief Create or find a specific named_data entry for writing in a + * sequence or list based on the OID. If not already in there, + * a new entry is added to the head of the list. + * Warning: Destructive behaviour for the val data! + * + * \param list The pointer to the location of the head of the list to seek + * through (will be updated in case of a new entry). + * \param oid The OID to look for. + * \param oid_len The size of the OID. + * \param val The data to store (can be \c NULL if you want to fill + * it by hand). + * \param val_len The minimum length of the data buffer needed. + * + * \return A pointer to the new / existing entry on success. + * \return \c NULL if if there was a memory allocation error. + */ +mbedtls_asn1_named_data *mbedtls_asn1_store_named_data( mbedtls_asn1_named_data **list, + const char *oid, size_t oid_len, + const unsigned char *val, + size_t val_len ); + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_ASN1_WRITE_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/base64.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/base64.h new file mode 100644 index 000000000..0d024164c --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/base64.h @@ -0,0 +1,98 @@ +/** + * \file base64.h + * + * \brief RFC 1521 base64 encoding/decoding + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_BASE64_H +#define MBEDTLS_BASE64_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +#define MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL -0x002A /**< Output buffer too small. */ +#define MBEDTLS_ERR_BASE64_INVALID_CHARACTER -0x002C /**< Invalid character in input. */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Encode a buffer into base64 format + * + * \param dst destination buffer + * \param dlen size of the destination buffer + * \param olen number of bytes written + * \param src source buffer + * \param slen amount of data to be encoded + * + * \return 0 if successful, or MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL. + * *olen is always updated to reflect the amount + * of data that has (or would have) been written. + * If that length cannot be represented, then no data is + * written to the buffer and *olen is set to the maximum + * length representable as a size_t. + * + * \note Call this function with dlen = 0 to obtain the + * required buffer size in *olen + */ +int mbedtls_base64_encode( unsigned char *dst, size_t dlen, size_t *olen, + const unsigned char *src, size_t slen ); + +/** + * \brief Decode a base64-formatted buffer + * + * \param dst destination buffer (can be NULL for checking size) + * \param dlen size of the destination buffer + * \param olen number of bytes written + * \param src source buffer + * \param slen amount of data to be decoded + * + * \return 0 if successful, MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL, or + * MBEDTLS_ERR_BASE64_INVALID_CHARACTER if the input data is + * not correct. *olen is always updated to reflect the amount + * of data that has (or would have) been written. + * + * \note Call this function with *dst = NULL or dlen = 0 to obtain + * the required buffer size in *olen + */ +int mbedtls_base64_decode( unsigned char *dst, size_t dlen, size_t *olen, + const unsigned char *src, size_t slen ); + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_base64_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* base64.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/bignum.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/bignum.h new file mode 100644 index 000000000..1c8607264 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/bignum.h @@ -0,0 +1,966 @@ +/** + * \file bignum.h + * + * \brief Multi-precision integer library + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_BIGNUM_H +#define MBEDTLS_BIGNUM_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +#if defined(MBEDTLS_FS_IO) +#include <stdio.h> +#endif + +#define MBEDTLS_ERR_MPI_FILE_IO_ERROR -0x0002 /**< An error occurred while reading from or writing to a file. */ +#define MBEDTLS_ERR_MPI_BAD_INPUT_DATA -0x0004 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_MPI_INVALID_CHARACTER -0x0006 /**< There is an invalid character in the digit string. */ +#define MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL -0x0008 /**< The buffer is too small to write to. */ +#define MBEDTLS_ERR_MPI_NEGATIVE_VALUE -0x000A /**< The input arguments are negative or result in illegal output. */ +#define MBEDTLS_ERR_MPI_DIVISION_BY_ZERO -0x000C /**< The input argument for division is zero, which is not allowed. */ +#define MBEDTLS_ERR_MPI_NOT_ACCEPTABLE -0x000E /**< The input arguments are not acceptable. */ +#define MBEDTLS_ERR_MPI_ALLOC_FAILED -0x0010 /**< Memory allocation failed. */ + +#define MBEDTLS_MPI_CHK(f) \ + do \ + { \ + if( ( ret = (f) ) != 0 ) \ + goto cleanup; \ + } while( 0 ) + +/* + * Maximum size MPIs are allowed to grow to in number of limbs. + */ +#define MBEDTLS_MPI_MAX_LIMBS 10000 + +#if !defined(MBEDTLS_MPI_WINDOW_SIZE) +/* + * Maximum window size used for modular exponentiation. Default: 6 + * Minimum value: 1. Maximum value: 6. + * + * Result is an array of ( 2 << MBEDTLS_MPI_WINDOW_SIZE ) MPIs used + * for the sliding window calculation. (So 64 by default) + * + * Reduction in size, reduces speed. + */ +#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ +#endif /* !MBEDTLS_MPI_WINDOW_SIZE */ + +#if !defined(MBEDTLS_MPI_MAX_SIZE) +/* + * Maximum size of MPIs allowed in bits and bytes for user-MPIs. + * ( Default: 512 bytes => 4096 bits, Maximum tested: 2048 bytes => 16384 bits ) + * + * Note: Calculations can temporarily result in larger MPIs. So the number + * of limbs required (MBEDTLS_MPI_MAX_LIMBS) is higher. + */ +#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ +#endif /* !MBEDTLS_MPI_MAX_SIZE */ + +#define MBEDTLS_MPI_MAX_BITS ( 8 * MBEDTLS_MPI_MAX_SIZE ) /**< Maximum number of bits for usable MPIs. */ + +/* + * When reading from files with mbedtls_mpi_read_file() and writing to files with + * mbedtls_mpi_write_file() the buffer should have space + * for a (short) label, the MPI (in the provided radix), the newline + * characters and the '\0'. + * + * By default we assume at least a 10 char label, a minimum radix of 10 + * (decimal) and a maximum of 4096 bit numbers (1234 decimal chars). + * Autosized at compile time for at least a 10 char label, a minimum radix + * of 10 (decimal) for a number of MBEDTLS_MPI_MAX_BITS size. + * + * This used to be statically sized to 1250 for a maximum of 4096 bit + * numbers (1234 decimal chars). + * + * Calculate using the formula: + * MBEDTLS_MPI_RW_BUFFER_SIZE = ceil(MBEDTLS_MPI_MAX_BITS / ln(10) * ln(2)) + + * LabelSize + 6 + */ +#define MBEDTLS_MPI_MAX_BITS_SCALE100 ( 100 * MBEDTLS_MPI_MAX_BITS ) +#define MBEDTLS_LN_2_DIV_LN_10_SCALE100 332 +#define MBEDTLS_MPI_RW_BUFFER_SIZE ( ((MBEDTLS_MPI_MAX_BITS_SCALE100 + MBEDTLS_LN_2_DIV_LN_10_SCALE100 - 1) / MBEDTLS_LN_2_DIV_LN_10_SCALE100) + 10 + 6 ) + +/* + * Define the base integer type, architecture-wise. + * + * 32 or 64-bit integer types can be forced regardless of the underlying + * architecture by defining MBEDTLS_HAVE_INT32 or MBEDTLS_HAVE_INT64 + * respectively and undefining MBEDTLS_HAVE_ASM. + * + * Double-width integers (e.g. 128-bit in 64-bit architectures) can be + * disabled by defining MBEDTLS_NO_UDBL_DIVISION. + */ +#if !defined(MBEDTLS_HAVE_INT32) + #if defined(_MSC_VER) && defined(_M_AMD64) + /* Always choose 64-bit when using MSC */ + #if !defined(MBEDTLS_HAVE_INT64) + #define MBEDTLS_HAVE_INT64 + #endif /* !MBEDTLS_HAVE_INT64 */ + typedef int64_t mbedtls_mpi_sint; + typedef uint64_t mbedtls_mpi_uint; + #elif defined(__GNUC__) && ( \ + defined(__amd64__) || defined(__x86_64__) || \ + defined(__ppc64__) || defined(__powerpc64__) || \ + defined(__ia64__) || defined(__alpha__) || \ + ( defined(__sparc__) && defined(__arch64__) ) || \ + defined(__s390x__) || defined(__mips64) ) + #if !defined(MBEDTLS_HAVE_INT64) + #define MBEDTLS_HAVE_INT64 + #endif /* MBEDTLS_HAVE_INT64 */ + typedef int64_t mbedtls_mpi_sint; + typedef uint64_t mbedtls_mpi_uint; + #if !defined(MBEDTLS_NO_UDBL_DIVISION) + /* mbedtls_t_udbl defined as 128-bit unsigned int */ + typedef unsigned int mbedtls_t_udbl __attribute__((mode(TI))); + #define MBEDTLS_HAVE_UDBL + #endif /* !MBEDTLS_NO_UDBL_DIVISION */ + #elif defined(__ARMCC_VERSION) && defined(__aarch64__) + /* + * __ARMCC_VERSION is defined for both armcc and armclang and + * __aarch64__ is only defined by armclang when compiling 64-bit code + */ + #if !defined(MBEDTLS_HAVE_INT64) + #define MBEDTLS_HAVE_INT64 + #endif /* !MBEDTLS_HAVE_INT64 */ + typedef int64_t mbedtls_mpi_sint; + typedef uint64_t mbedtls_mpi_uint; + #if !defined(MBEDTLS_NO_UDBL_DIVISION) + /* mbedtls_t_udbl defined as 128-bit unsigned int */ + typedef __uint128_t mbedtls_t_udbl; + #define MBEDTLS_HAVE_UDBL + #endif /* !MBEDTLS_NO_UDBL_DIVISION */ + #elif defined(MBEDTLS_HAVE_INT64) + /* Force 64-bit integers with unknown compiler */ + typedef int64_t mbedtls_mpi_sint; + typedef uint64_t mbedtls_mpi_uint; + #endif +#endif /* !MBEDTLS_HAVE_INT32 */ + +#if !defined(MBEDTLS_HAVE_INT64) + /* Default to 32-bit compilation */ + #if !defined(MBEDTLS_HAVE_INT32) + #define MBEDTLS_HAVE_INT32 + #endif /* !MBEDTLS_HAVE_INT32 */ + typedef int32_t mbedtls_mpi_sint; + typedef uint32_t mbedtls_mpi_uint; + #if !defined(MBEDTLS_NO_UDBL_DIVISION) + typedef uint64_t mbedtls_t_udbl; + #define MBEDTLS_HAVE_UDBL + #endif /* !MBEDTLS_NO_UDBL_DIVISION */ +#endif /* !MBEDTLS_HAVE_INT64 */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief MPI structure + */ +typedef struct mbedtls_mpi +{ + int s; /*!< integer sign */ + size_t n; /*!< total # of limbs */ + mbedtls_mpi_uint *p; /*!< pointer to limbs */ +} +mbedtls_mpi; + +/** + * \brief Initialize an MPI context. + * + * This makes the MPI ready to be set or freed, + * but does not define a value for the MPI. + * + * \param X The MPI context to initialize. This must not be \c NULL. + */ +void mbedtls_mpi_init( mbedtls_mpi *X ); + +/** + * \brief This function frees the components of an MPI context. + * + * \param X The MPI context to be cleared. This may be \c NULL, + * in which case this function is a no-op. If it is + * not \c NULL, it must point to an initialized MPI. + */ +void mbedtls_mpi_free( mbedtls_mpi *X ); + +/** + * \brief Enlarge an MPI to the specified number of limbs. + * + * \note This function does nothing if the MPI is + * already large enough. + * + * \param X The MPI to grow. It must be initialized. + * \param nblimbs The target number of limbs. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_mpi_grow( mbedtls_mpi *X, size_t nblimbs ); + +/** + * \brief This function resizes an MPI downwards, keeping at least the + * specified number of limbs. + * + * If \c X is smaller than \c nblimbs, it is resized up + * instead. + * + * \param X The MPI to shrink. This must point to an initialized MPI. + * \param nblimbs The minimum number of limbs to keep. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed + * (this can only happen when resizing up). + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_mpi_shrink( mbedtls_mpi *X, size_t nblimbs ); + +/** + * \brief Make a copy of an MPI. + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param Y The source MPI. This must point to an initialized MPI. + * + * \note The limb-buffer in the destination MPI is enlarged + * if necessary to hold the value in the source MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_mpi_copy( mbedtls_mpi *X, const mbedtls_mpi *Y ); + +/** + * \brief Swap the contents of two MPIs. + * + * \param X The first MPI. It must be initialized. + * \param Y The second MPI. It must be initialized. + */ +void mbedtls_mpi_swap( mbedtls_mpi *X, mbedtls_mpi *Y ); + +/** + * \brief Perform a safe conditional copy of MPI which doesn't + * reveal whether the condition was true or not. + * + * \param X The MPI to conditionally assign to. This must point + * to an initialized MPI. + * \param Y The MPI to be assigned from. This must point to an + * initialized MPI. + * \param assign The condition deciding whether to perform the + * assignment or not. Possible values: + * * \c 1: Perform the assignment `X = Y`. + * * \c 0: Keep the original value of \p X. + * + * \note This function is equivalent to + * `if( assign ) mbedtls_mpi_copy( X, Y );` + * except that it avoids leaking any information about whether + * the assignment was done or not (the above code may leak + * information through branch prediction and/or memory access + * patterns analysis). + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_mpi_safe_cond_assign( mbedtls_mpi *X, const mbedtls_mpi *Y, unsigned char assign ); + +/** + * \brief Perform a safe conditional swap which doesn't + * reveal whether the condition was true or not. + * + * \param X The first MPI. This must be initialized. + * \param Y The second MPI. This must be initialized. + * \param assign The condition deciding whether to perform + * the swap or not. Possible values: + * * \c 1: Swap the values of \p X and \p Y. + * * \c 0: Keep the original values of \p X and \p Y. + * + * \note This function is equivalent to + * if( assign ) mbedtls_mpi_swap( X, Y ); + * except that it avoids leaking any information about whether + * the assignment was done or not (the above code may leak + * information through branch prediction and/or memory access + * patterns analysis). + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return Another negative error code on other kinds of failure. + * + */ +int mbedtls_mpi_safe_cond_swap( mbedtls_mpi *X, mbedtls_mpi *Y, unsigned char assign ); + +/** + * \brief Store integer value in MPI. + * + * \param X The MPI to set. This must be initialized. + * \param z The value to use. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_mpi_lset( mbedtls_mpi *X, mbedtls_mpi_sint z ); + +/** + * \brief Get a specific bit from an MPI. + * + * \param X The MPI to query. This must be initialized. + * \param pos Zero-based index of the bit to query. + * + * \return \c 0 or \c 1 on success, depending on whether bit \c pos + * of \c X is unset or set. + * \return A negative error code on failure. + */ +int mbedtls_mpi_get_bit( const mbedtls_mpi *X, size_t pos ); + +/** + * \brief Modify a specific bit in an MPI. + * + * \note This function will grow the target MPI if necessary to set a + * bit to \c 1 in a not yet existing limb. It will not grow if + * the bit should be set to \c 0. + * + * \param X The MPI to modify. This must be initialized. + * \param pos Zero-based index of the bit to modify. + * \param val The desired value of bit \c pos: \c 0 or \c 1. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_mpi_set_bit( mbedtls_mpi *X, size_t pos, unsigned char val ); + +/** + * \brief Return the number of bits of value \c 0 before the + * least significant bit of value \c 1. + * + * \note This is the same as the zero-based index of + * the least significant bit of value \c 1. + * + * \param X The MPI to query. + * + * \return The number of bits of value \c 0 before the least significant + * bit of value \c 1 in \p X. + */ +size_t mbedtls_mpi_lsb( const mbedtls_mpi *X ); + +/** + * \brief Return the number of bits up to and including the most + * significant bit of value \c 1. + * + * * \note This is same as the one-based index of the most + * significant bit of value \c 1. + * + * \param X The MPI to query. This must point to an initialized MPI. + * + * \return The number of bits up to and including the most + * significant bit of value \c 1. + */ +size_t mbedtls_mpi_bitlen( const mbedtls_mpi *X ); + +/** + * \brief Return the total size of an MPI value in bytes. + * + * \param X The MPI to use. This must point to an initialized MPI. + * + * \note The value returned by this function may be less than + * the number of bytes used to store \p X internally. + * This happens if and only if there are trailing bytes + * of value zero. + * + * \return The least number of bytes capable of storing + * the absolute value of \p X. + */ +size_t mbedtls_mpi_size( const mbedtls_mpi *X ); + +/** + * \brief Import an MPI from an ASCII string. + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param radix The numeric base of the input string. + * \param s Null-terminated string buffer. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_mpi_read_string( mbedtls_mpi *X, int radix, const char *s ); + +/** + * \brief Export an MPI to an ASCII string. + * + * \param X The source MPI. This must point to an initialized MPI. + * \param radix The numeric base of the output string. + * \param buf The buffer to write the string to. This must be writable + * buffer of length \p buflen Bytes. + * \param buflen The available size in Bytes of \p buf. + * \param olen The address at which to store the length of the string + * written, including the final \c NULL byte. This must + * not be \c NULL. + * + * \note You can call this function with `buflen == 0` to obtain the + * minimum required buffer size in `*olen`. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if the target buffer \p buf + * is too small to hold the value of \p X in the desired base. + * In this case, `*olen` is nonetheless updated to contain the + * size of \p buf required for a successful call. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_write_string( const mbedtls_mpi *X, int radix, + char *buf, size_t buflen, size_t *olen ); + +#if defined(MBEDTLS_FS_IO) +/** + * \brief Read an MPI from a line in an opened file. + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param radix The numeric base of the string representation used + * in the source line. + * \param fin The input file handle to use. This must not be \c NULL. + * + * \note On success, this function advances the file stream + * to the end of the current line or to EOF. + * + * The function returns \c 0 on an empty line. + * + * Leading whitespaces are ignored, as is a + * '0x' prefix for radix \c 16. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if the file read buffer + * is too small. + * \return Another negative error code on failure. + */ +int mbedtls_mpi_read_file( mbedtls_mpi *X, int radix, FILE *fin ); + +/** + * \brief Export an MPI into an opened file. + * + * \param p A string prefix to emit prior to the MPI data. + * For example, this might be a label, or "0x" when + * printing in base \c 16. This may be \c NULL if no prefix + * is needed. + * \param X The source MPI. This must point to an initialized MPI. + * \param radix The numeric base to be used in the emitted string. + * \param fout The output file handle. This may be \c NULL, in which case + * the output is written to \c stdout. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_mpi_write_file( const char *p, const mbedtls_mpi *X, + int radix, FILE *fout ); +#endif /* MBEDTLS_FS_IO */ + +/** + * \brief Import an MPI from unsigned big endian binary data. + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param buf The input buffer. This must be a readable buffer of length + * \p buflen Bytes. + * \param buflen The length of the input buffer \p p in Bytes. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_read_binary( mbedtls_mpi *X, const unsigned char *buf, + size_t buflen ); + +/** + * \brief Export an MPI into unsigned big endian binary data + * of fixed size. + * + * \param X The source MPI. This must point to an initialized MPI. + * \param buf The output buffer. This must be a writable buffer of length + * \p buflen Bytes. + * \param buflen The size of the output buffer \p buf in Bytes. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if \p buf isn't + * large enough to hold the value of \p X. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_write_binary( const mbedtls_mpi *X, unsigned char *buf, + size_t buflen ); + +/** + * \brief Perform a left-shift on an MPI: X <<= count + * + * \param X The MPI to shift. This must point to an initialized MPI. + * \param count The number of bits to shift by. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_shift_l( mbedtls_mpi *X, size_t count ); + +/** + * \brief Perform a right-shift on an MPI: X >>= count + * + * \param X The MPI to shift. This must point to an initialized MPI. + * \param count The number of bits to shift by. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_shift_r( mbedtls_mpi *X, size_t count ); + +/** + * \brief Compare the absolute values of two MPIs. + * + * \param X The left-hand MPI. This must point to an initialized MPI. + * \param Y The right-hand MPI. This must point to an initialized MPI. + * + * \return \c 1 if `|X|` is greater than `|Y|`. + * \return \c -1 if `|X|` is lesser than `|Y|`. + * \return \c 0 if `|X|` is equal to `|Y|`. + */ +int mbedtls_mpi_cmp_abs( const mbedtls_mpi *X, const mbedtls_mpi *Y ); + +/** + * \brief Compare two MPIs. + * + * \param X The left-hand MPI. This must point to an initialized MPI. + * \param Y The right-hand MPI. This must point to an initialized MPI. + * + * \return \c 1 if \p X is greater than \p Y. + * \return \c -1 if \p X is lesser than \p Y. + * \return \c 0 if \p X is equal to \p Y. + */ +int mbedtls_mpi_cmp_mpi( const mbedtls_mpi *X, const mbedtls_mpi *Y ); + +/** + * \brief Compare an MPI with an integer. + * + * \param X The left-hand MPI. This must point to an initialized MPI. + * \param z The integer value to compare \p X to. + * + * \return \c 1 if \p X is greater than \p z. + * \return \c -1 if \p X is lesser than \p z. + * \return \c 0 if \p X is equal to \p z. + */ +int mbedtls_mpi_cmp_int( const mbedtls_mpi *X, mbedtls_mpi_sint z ); + +/** + * \brief Perform an unsigned addition of MPIs: X = |A| + |B| + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The first summand. This must point to an initialized MPI. + * \param B The second summand. This must point to an initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_add_abs( mbedtls_mpi *X, const mbedtls_mpi *A, + const mbedtls_mpi *B ); + +/** + * \brief Perform an unsigned subtraction of MPIs: X = |A| - |B| + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The minuend. This must point to an initialized MPI. + * \param B The subtrahend. This must point to an initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_NEGATIVE_VALUE if \p B is greater than \p A. + * \return Another negative error code on different kinds of failure. + * + */ +int mbedtls_mpi_sub_abs( mbedtls_mpi *X, const mbedtls_mpi *A, + const mbedtls_mpi *B ); + +/** + * \brief Perform a signed addition of MPIs: X = A + B + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The first summand. This must point to an initialized MPI. + * \param B The second summand. This must point to an initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_add_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, + const mbedtls_mpi *B ); + +/** + * \brief Perform a signed subtraction of MPIs: X = A - B + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The minuend. This must point to an initialized MPI. + * \param B The subtrahend. This must point to an initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_sub_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, + const mbedtls_mpi *B ); + +/** + * \brief Perform a signed addition of an MPI and an integer: X = A + b + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The first summand. This must point to an initialized MPI. + * \param b The second summand. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_add_int( mbedtls_mpi *X, const mbedtls_mpi *A, + mbedtls_mpi_sint b ); + +/** + * \brief Perform a signed subtraction of an MPI and an integer: + * X = A - b + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The minuend. This must point to an initialized MPI. + * \param b The subtrahend. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_sub_int( mbedtls_mpi *X, const mbedtls_mpi *A, + mbedtls_mpi_sint b ); + +/** + * \brief Perform a multiplication of two MPIs: X = A * B + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The first factor. This must point to an initialized MPI. + * \param B The second factor. This must point to an initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + * + */ +int mbedtls_mpi_mul_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, + const mbedtls_mpi *B ); + +/** + * \brief Perform a multiplication of an MPI with an unsigned integer: + * X = A * b + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The first factor. This must point to an initialized MPI. + * \param b The second factor. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + * + */ +int mbedtls_mpi_mul_int( mbedtls_mpi *X, const mbedtls_mpi *A, + mbedtls_mpi_uint b ); + +/** + * \brief Perform a division with remainder of two MPIs: + * A = Q * B + R + * + * \param Q The destination MPI for the quotient. + * This may be \c NULL if the value of the + * quotient is not needed. + * \param R The destination MPI for the remainder value. + * This may be \c NULL if the value of the + * remainder is not needed. + * \param A The dividend. This must point to an initialized MPi. + * \param B The divisor. This must point to an initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return #MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if \p B equals zero. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_div_mpi( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, + const mbedtls_mpi *B ); + +/** + * \brief Perform a division with remainder of an MPI by an integer: + * A = Q * b + R + * + * \param Q The destination MPI for the quotient. + * This may be \c NULL if the value of the + * quotient is not needed. + * \param R The destination MPI for the remainder value. + * This may be \c NULL if the value of the + * remainder is not needed. + * \param A The dividend. This must point to an initialized MPi. + * \param b The divisor. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed. + * \return #MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if \p b equals zero. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_div_int( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, + mbedtls_mpi_sint b ); + +/** + * \brief Perform a modular reduction. R = A mod B + * + * \param R The destination MPI for the residue value. + * This must point to an initialized MPI. + * \param A The MPI to compute the residue of. + * This must point to an initialized MPI. + * \param B The base of the modular reduction. + * This must point to an initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return #MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if \p B equals zero. + * \return #MBEDTLS_ERR_MPI_NEGATIVE_VALUE if \p B is negative. + * \return Another negative error code on different kinds of failure. + * + */ +int mbedtls_mpi_mod_mpi( mbedtls_mpi *R, const mbedtls_mpi *A, + const mbedtls_mpi *B ); + +/** + * \brief Perform a modular reduction with respect to an integer. + * r = A mod b + * + * \param r The address at which to store the residue. + * This must not be \c NULL. + * \param A The MPI to compute the residue of. + * This must point to an initialized MPi. + * \param b The integer base of the modular reduction. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return #MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if \p b equals zero. + * \return #MBEDTLS_ERR_MPI_NEGATIVE_VALUE if \p b is negative. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_mod_int( mbedtls_mpi_uint *r, const mbedtls_mpi *A, + mbedtls_mpi_sint b ); + +/** + * \brief Perform a sliding-window exponentiation: X = A^E mod N + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The base of the exponentiation. + * This must point to an initialized MPI. + * \param E The exponent MPI. This must point to an initialized MPI. + * \param N The base for the modular reduction. This must point to an + * initialized MPI. + * \param _RR A helper MPI depending solely on \p N which can be used to + * speed-up multiple modular exponentiations for the same value + * of \p N. This may be \c NULL. If it is not \c NULL, it must + * point to an initialized MPI. If it hasn't been used after + * the call to mbedtls_mpi_init(), this function will compute + * the helper value and store it in \p _RR for reuse on + * subsequent calls to this function. Otherwise, the function + * will assume that \p _RR holds the helper value set by a + * previous call to mbedtls_mpi_exp_mod(), and reuse it. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \c N is negative or + * even, or if \c E is negative. + * \return Another negative error code on different kinds of failures. + * + */ +int mbedtls_mpi_exp_mod( mbedtls_mpi *X, const mbedtls_mpi *A, + const mbedtls_mpi *E, const mbedtls_mpi *N, + mbedtls_mpi *_RR ); + +/** + * \brief Fill an MPI with a number of random bytes. + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param size The number of random bytes to generate. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG parameter to be passed to \p f_rng. This may be + * \c NULL if \p f_rng doesn't need a context argument. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on failure. + * + * \note The bytes obtained from the RNG are interpreted + * as a big-endian representation of an MPI; this can + * be relevant in applications like deterministic ECDSA. + */ +int mbedtls_mpi_fill_random( mbedtls_mpi *X, size_t size, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Compute the greatest common divisor: G = gcd(A, B) + * + * \param G The destination MPI. This must point to an initialized MPI. + * \param A The first operand. This must point to an initialized MPI. + * \param B The second operand. This must point to an initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return Another negative error code on different kinds of failure. + */ +int mbedtls_mpi_gcd( mbedtls_mpi *G, const mbedtls_mpi *A, + const mbedtls_mpi *B ); + +/** + * \brief Compute the modular inverse: X = A^-1 mod N + * + * \param X The destination MPI. This must point to an initialized MPI. + * \param A The MPI to calculate the modular inverse of. This must point + * to an initialized MPI. + * \param N The base of the modular inversion. This must point to an + * initialized MPI. + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p N is less than + * or equal to one. + * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if \p has no modular inverse + * with respect to \p N. + */ +int mbedtls_mpi_inv_mod( mbedtls_mpi *X, const mbedtls_mpi *A, + const mbedtls_mpi *N ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief Perform a Miller-Rabin primality test with error + * probability of 2<sup>-80</sup>. + * + * \deprecated Superseded by mbedtls_mpi_is_prime_ext() which allows + * specifying the number of Miller-Rabin rounds. + * + * \param X The MPI to check for primality. + * This must point to an initialized MPI. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG parameter to be passed to \p f_rng. + * This may be \c NULL if \p f_rng doesn't use a + * context parameter. + * + * \return \c 0 if successful, i.e. \p X is probably prime. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if \p X is not prime. + * \return Another negative error code on other kinds of failure. + */ +MBEDTLS_DEPRECATED int mbedtls_mpi_is_prime( const mbedtls_mpi *X, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief Miller-Rabin primality test. + * + * \warning If \p X is potentially generated by an adversary, for example + * when validating cryptographic parameters that you didn't + * generate yourself and that are supposed to be prime, then + * \p rounds should be at least the half of the security + * strength of the cryptographic algorithm. On the other hand, + * if \p X is chosen uniformly or non-adversially (as is the + * case when mbedtls_mpi_gen_prime calls this function), then + * \p rounds can be much lower. + * + * \param X The MPI to check for primality. + * This must point to an initialized MPI. + * \param rounds The number of bases to perform the Miller-Rabin primality + * test for. The probability of returning 0 on a composite is + * at most 2<sup>-2*\p rounds</sup>. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG parameter to be passed to \p f_rng. + * This may be \c NULL if \p f_rng doesn't use + * a context parameter. + * + * \return \c 0 if successful, i.e. \p X is probably prime. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if \p X is not prime. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_mpi_is_prime_ext( const mbedtls_mpi *X, int rounds, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); +/** + * \brief Flags for mbedtls_mpi_gen_prime() + * + * Each of these flags is a constraint on the result X returned by + * mbedtls_mpi_gen_prime(). + */ +typedef enum { + MBEDTLS_MPI_GEN_PRIME_FLAG_DH = 0x0001, /**< (X-1)/2 is prime too */ + MBEDTLS_MPI_GEN_PRIME_FLAG_LOW_ERR = 0x0002, /**< lower error rate from 2<sup>-80</sup> to 2<sup>-128</sup> */ +} mbedtls_mpi_gen_prime_flag_t; + +/** + * \brief Generate a prime number. + * + * \param X The destination MPI to store the generated prime in. + * This must point to an initialized MPi. + * \param nbits The required size of the destination MPI in bits. + * This must be between \c 3 and #MBEDTLS_MPI_MAX_BITS. + * \param flags A mask of flags of type #mbedtls_mpi_gen_prime_flag_t. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG parameter to be passed to \p f_rng. + * This may be \c NULL if \p f_rng doesn't use + * a context parameter. + * + * \return \c 0 if successful, in which case \p X holds a + * probably prime number. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if a memory allocation failed. + * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if `nbits` is not between + * \c 3 and #MBEDTLS_MPI_MAX_BITS. + */ +int mbedtls_mpi_gen_prime( mbedtls_mpi *X, size_t nbits, int flags, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_mpi_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* bignum.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/blowfish.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/blowfish.h new file mode 100644 index 000000000..f01573dca --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/blowfish.h @@ -0,0 +1,287 @@ +/** + * \file blowfish.h + * + * \brief Blowfish block cipher + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_BLOWFISH_H +#define MBEDTLS_BLOWFISH_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +#include "platform_util.h" + +#define MBEDTLS_BLOWFISH_ENCRYPT 1 +#define MBEDTLS_BLOWFISH_DECRYPT 0 +#define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448 +#define MBEDTLS_BLOWFISH_MIN_KEY_BITS 32 +#define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */ +#define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */ + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0016 ) +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ +#define MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA -0x0016 /**< Bad input data. */ + +#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */ + +/* MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED is deprecated and should not be used. + */ +#define MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED -0x0017 /**< Blowfish hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_BLOWFISH_ALT) +// Regular implementation +// + +/** + * \brief Blowfish context structure + */ +typedef struct mbedtls_blowfish_context +{ + uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2]; /*!< Blowfish round keys */ + uint32_t S[4][256]; /*!< key dependent S-boxes */ +} +mbedtls_blowfish_context; + +#else /* MBEDTLS_BLOWFISH_ALT */ +#include "blowfish_alt.h" +#endif /* MBEDTLS_BLOWFISH_ALT */ + +/** + * \brief Initialize a Blowfish context. + * + * \param ctx The Blowfish context to be initialized. + * This must not be \c NULL. + */ +void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx ); + +/** + * \brief Clear a Blowfish context. + * + * \param ctx The Blowfish context to be cleared. + * This may be \c NULL, in which case this function + * returns immediately. If it is not \c NULL, it must + * point to an initialized Blowfish context. + */ +void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx ); + +/** + * \brief Perform a Blowfish key schedule operation. + * + * \param ctx The Blowfish context to perform the key schedule on. + * \param key The encryption key. This must be a readable buffer of + * length \p keybits Bits. + * \param keybits The length of \p key in Bits. This must be between + * \c 32 and \c 448 and a multiple of \c 8. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key, + unsigned int keybits ); + +/** + * \brief Perform a Blowfish-ECB block encryption/decryption operation. + * + * \param ctx The Blowfish context to use. This must be initialized + * and bound to a key. + * \param mode The mode of operation. Possible values are + * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or + * #MBEDTLS_BLOWFISH_DECRYPT for decryption. + * \param input The input block. This must be a readable buffer + * of size \c 8 Bytes. + * \param output The output block. This must be a writable buffer + * of size \c 8 Bytes. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx, + int mode, + const unsigned char input[MBEDTLS_BLOWFISH_BLOCKSIZE], + unsigned char output[MBEDTLS_BLOWFISH_BLOCKSIZE] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief Perform a Blowfish-CBC buffer encryption/decryption operation. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx The Blowfish context to use. This must be initialized + * and bound to a key. + * \param mode The mode of operation. Possible values are + * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or + * #MBEDTLS_BLOWFISH_DECRYPT for decryption. + * \param length The length of the input data in Bytes. This must be + * multiple of \c 8. + * \param iv The initialization vector. This must be a read/write buffer + * of length \c 8 Bytes. It is updated by this function. + * \param input The input data. This must be a readable buffer of length + * \p length Bytes. + * \param output The output data. This must be a writable buffer of length + * \p length Bytes. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx, + int mode, + size_t length, + unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +#if defined(MBEDTLS_CIPHER_MODE_CFB) +/** + * \brief Perform a Blowfish CFB buffer encryption/decryption operation. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx The Blowfish context to use. This must be initialized + * and bound to a key. + * \param mode The mode of operation. Possible values are + * #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or + * #MBEDTLS_BLOWFISH_DECRYPT for decryption. + * \param length The length of the input data in Bytes. + * \param iv_off The offset in the initialiation vector. + * The value pointed to must be smaller than \c 8 Bytes. + * It is updated by this function to support the aforementioned + * streaming usage. + * \param iv The initialization vector. This must be a read/write buffer + * of size \c 8 Bytes. It is updated after use. + * \param input The input data. This must be a readable buffer of length + * \p length Bytes. + * \param output The output data. This must be a writable buffer of length + * \p length Bytes. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx, + int mode, + size_t length, + size_t *iv_off, + unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /*MBEDTLS_CIPHER_MODE_CFB */ + +#if defined(MBEDTLS_CIPHER_MODE_CTR) +/** + * \brief Perform a Blowfish-CTR buffer encryption/decryption operation. + * + * \warning You must never reuse a nonce value with the same key. Doing so + * would void the encryption for the two messages encrypted with + * the same nonce and key. + * + * There are two common strategies for managing nonces with CTR: + * + * 1. You can handle everything as a single message processed over + * successive calls to this function. In that case, you want to + * set \p nonce_counter and \p nc_off to 0 for the first call, and + * then preserve the values of \p nonce_counter, \p nc_off and \p + * stream_block across calls to this function as they will be + * updated by this function. + * + * With this strategy, you must not encrypt more than 2**64 + * blocks of data with the same key. + * + * 2. You can encrypt separate messages by dividing the \p + * nonce_counter buffer in two areas: the first one used for a + * per-message nonce, handled by yourself, and the second one + * updated by this function internally. + * + * For example, you might reserve the first 4 bytes for the + * per-message nonce, and the last 4 bytes for internal use. In that + * case, before calling this function on a new message you need to + * set the first 4 bytes of \p nonce_counter to your chosen nonce + * value, the last 4 to 0, and \p nc_off to 0 (which will cause \p + * stream_block to be ignored). That way, you can encrypt at most + * 2**32 messages of up to 2**32 blocks each with the same key. + * + * The per-message nonce (or information sufficient to reconstruct + * it) needs to be communicated with the ciphertext and must be unique. + * The recommended way to ensure uniqueness is to use a message + * counter. + * + * Note that for both stategies, sizes are measured in blocks and + * that a Blowfish block is 8 bytes. + * + * \warning Upon return, \p stream_block contains sensitive data. Its + * content must not be written to insecure storage and should be + * securely discarded as soon as it's no longer needed. + * + * \param ctx The Blowfish context to use. This must be initialized + * and bound to a key. + * \param length The length of the input data in Bytes. + * \param nc_off The offset in the current stream_block (for resuming + * within current cipher stream). The offset pointer + * should be \c 0 at the start of a stream and must be + * smaller than \c 8. It is updated by this function. + * \param nonce_counter The 64-bit nonce and counter. This must point to a + * read/write buffer of length \c 8 Bytes. + * \param stream_block The saved stream-block for resuming. This must point to + * a read/write buffer of length \c 8 Bytes. + * \param input The input data. This must be a readable buffer of + * length \p length Bytes. + * \param output The output data. This must be a writable buffer of + * length \p length Bytes. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx, + size_t length, + size_t *nc_off, + unsigned char nonce_counter[MBEDTLS_BLOWFISH_BLOCKSIZE], + unsigned char stream_block[MBEDTLS_BLOWFISH_BLOCKSIZE], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CTR */ + +#ifdef __cplusplus +} +#endif + +#endif /* blowfish.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/bn_mul.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/bn_mul.h new file mode 100644 index 000000000..c33bd8d4a --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/bn_mul.h @@ -0,0 +1,915 @@ +/** + * \file bn_mul.h + * + * \brief Multi-precision integer library + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +/* + * Multiply source vector [s] with b, add result + * to destination vector [d] and set carry c. + * + * Currently supports: + * + * . IA-32 (386+) . AMD64 / EM64T + * . IA-32 (SSE2) . Motorola 68000 + * . PowerPC, 32-bit . MicroBlaze + * . PowerPC, 64-bit . TriCore + * . SPARC v8 . ARM v3+ + * . Alpha . MIPS32 + * . C, longlong . C, generic + */ +#ifndef MBEDTLS_BN_MUL_H +#define MBEDTLS_BN_MUL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "bignum.h" + +#if defined(MBEDTLS_HAVE_ASM) + +#ifndef asm +#define asm __asm +#endif + +/* armcc5 --gnu defines __GNUC__ but doesn't support GNU's extended asm */ +#if defined(__GNUC__) && \ + ( !defined(__ARMCC_VERSION) || __ARMCC_VERSION >= 6000000 ) + +/* + * Disable use of the i386 assembly code below if option -O0, to disable all + * compiler optimisations, is passed, detected with __OPTIMIZE__ + * This is done as the number of registers used in the assembly code doesn't + * work with the -O0 option. + */ +#if defined(__i386__) && defined(__OPTIMIZE__) + +#define MULADDC_INIT \ + asm( \ + "movl %%ebx, %0 \n\t" \ + "movl %5, %%esi \n\t" \ + "movl %6, %%edi \n\t" \ + "movl %7, %%ecx \n\t" \ + "movl %8, %%ebx \n\t" + +#define MULADDC_CORE \ + "lodsl \n\t" \ + "mull %%ebx \n\t" \ + "addl %%ecx, %%eax \n\t" \ + "adcl $0, %%edx \n\t" \ + "addl (%%edi), %%eax \n\t" \ + "adcl $0, %%edx \n\t" \ + "movl %%edx, %%ecx \n\t" \ + "stosl \n\t" + +#if defined(MBEDTLS_HAVE_SSE2) + +#define MULADDC_HUIT \ + "movd %%ecx, %%mm1 \n\t" \ + "movd %%ebx, %%mm0 \n\t" \ + "movd (%%edi), %%mm3 \n\t" \ + "paddq %%mm3, %%mm1 \n\t" \ + "movd (%%esi), %%mm2 \n\t" \ + "pmuludq %%mm0, %%mm2 \n\t" \ + "movd 4(%%esi), %%mm4 \n\t" \ + "pmuludq %%mm0, %%mm4 \n\t" \ + "movd 8(%%esi), %%mm6 \n\t" \ + "pmuludq %%mm0, %%mm6 \n\t" \ + "movd 12(%%esi), %%mm7 \n\t" \ + "pmuludq %%mm0, %%mm7 \n\t" \ + "paddq %%mm2, %%mm1 \n\t" \ + "movd 4(%%edi), %%mm3 \n\t" \ + "paddq %%mm4, %%mm3 \n\t" \ + "movd 8(%%edi), %%mm5 \n\t" \ + "paddq %%mm6, %%mm5 \n\t" \ + "movd 12(%%edi), %%mm4 \n\t" \ + "paddq %%mm4, %%mm7 \n\t" \ + "movd %%mm1, (%%edi) \n\t" \ + "movd 16(%%esi), %%mm2 \n\t" \ + "pmuludq %%mm0, %%mm2 \n\t" \ + "psrlq $32, %%mm1 \n\t" \ + "movd 20(%%esi), %%mm4 \n\t" \ + "pmuludq %%mm0, %%mm4 \n\t" \ + "paddq %%mm3, %%mm1 \n\t" \ + "movd 24(%%esi), %%mm6 \n\t" \ + "pmuludq %%mm0, %%mm6 \n\t" \ + "movd %%mm1, 4(%%edi) \n\t" \ + "psrlq $32, %%mm1 \n\t" \ + "movd 28(%%esi), %%mm3 \n\t" \ + "pmuludq %%mm0, %%mm3 \n\t" \ + "paddq %%mm5, %%mm1 \n\t" \ + "movd 16(%%edi), %%mm5 \n\t" \ + "paddq %%mm5, %%mm2 \n\t" \ + "movd %%mm1, 8(%%edi) \n\t" \ + "psrlq $32, %%mm1 \n\t" \ + "paddq %%mm7, %%mm1 \n\t" \ + "movd 20(%%edi), %%mm5 \n\t" \ + "paddq %%mm5, %%mm4 \n\t" \ + "movd %%mm1, 12(%%edi) \n\t" \ + "psrlq $32, %%mm1 \n\t" \ + "paddq %%mm2, %%mm1 \n\t" \ + "movd 24(%%edi), %%mm5 \n\t" \ + "paddq %%mm5, %%mm6 \n\t" \ + "movd %%mm1, 16(%%edi) \n\t" \ + "psrlq $32, %%mm1 \n\t" \ + "paddq %%mm4, %%mm1 \n\t" \ + "movd 28(%%edi), %%mm5 \n\t" \ + "paddq %%mm5, %%mm3 \n\t" \ + "movd %%mm1, 20(%%edi) \n\t" \ + "psrlq $32, %%mm1 \n\t" \ + "paddq %%mm6, %%mm1 \n\t" \ + "movd %%mm1, 24(%%edi) \n\t" \ + "psrlq $32, %%mm1 \n\t" \ + "paddq %%mm3, %%mm1 \n\t" \ + "movd %%mm1, 28(%%edi) \n\t" \ + "addl $32, %%edi \n\t" \ + "addl $32, %%esi \n\t" \ + "psrlq $32, %%mm1 \n\t" \ + "movd %%mm1, %%ecx \n\t" + +#define MULADDC_STOP \ + "emms \n\t" \ + "movl %4, %%ebx \n\t" \ + "movl %%ecx, %1 \n\t" \ + "movl %%edi, %2 \n\t" \ + "movl %%esi, %3 \n\t" \ + : "=m" (t), "=m" (c), "=m" (d), "=m" (s) \ + : "m" (t), "m" (s), "m" (d), "m" (c), "m" (b) \ + : "eax", "ebx", "ecx", "edx", "esi", "edi" \ + ); + +#else + +#define MULADDC_STOP \ + "movl %4, %%ebx \n\t" \ + "movl %%ecx, %1 \n\t" \ + "movl %%edi, %2 \n\t" \ + "movl %%esi, %3 \n\t" \ + : "=m" (t), "=m" (c), "=m" (d), "=m" (s) \ + : "m" (t), "m" (s), "m" (d), "m" (c), "m" (b) \ + : "eax", "ebx", "ecx", "edx", "esi", "edi" \ + ); +#endif /* SSE2 */ +#endif /* i386 */ + +#if defined(__amd64__) || defined (__x86_64__) + +#define MULADDC_INIT \ + asm( \ + "xorq %%r8, %%r8\n" + +#define MULADDC_CORE \ + "movq (%%rsi), %%rax\n" \ + "mulq %%rbx\n" \ + "addq $8, %%rsi\n" \ + "addq %%rcx, %%rax\n" \ + "movq %%r8, %%rcx\n" \ + "adcq $0, %%rdx\n" \ + "nop \n" \ + "addq %%rax, (%%rdi)\n" \ + "adcq %%rdx, %%rcx\n" \ + "addq $8, %%rdi\n" + +#define MULADDC_STOP \ + : "+c" (c), "+D" (d), "+S" (s) \ + : "b" (b) \ + : "rax", "rdx", "r8" \ + ); + +#endif /* AMD64 */ + +#if defined(__mc68020__) || defined(__mcpu32__) + +#define MULADDC_INIT \ + asm( \ + "movl %3, %%a2 \n\t" \ + "movl %4, %%a3 \n\t" \ + "movl %5, %%d3 \n\t" \ + "movl %6, %%d2 \n\t" \ + "moveq #0, %%d0 \n\t" + +#define MULADDC_CORE \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d4:%%d1 \n\t" \ + "addl %%d3, %%d1 \n\t" \ + "addxl %%d0, %%d4 \n\t" \ + "moveq #0, %%d3 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "addxl %%d4, %%d3 \n\t" + +#define MULADDC_STOP \ + "movl %%d3, %0 \n\t" \ + "movl %%a3, %1 \n\t" \ + "movl %%a2, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "d0", "d1", "d2", "d3", "d4", "a2", "a3" \ + ); + +#define MULADDC_HUIT \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d4:%%d1 \n\t" \ + "addxl %%d3, %%d1 \n\t" \ + "addxl %%d0, %%d4 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d3:%%d1 \n\t" \ + "addxl %%d4, %%d1 \n\t" \ + "addxl %%d0, %%d3 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d4:%%d1 \n\t" \ + "addxl %%d3, %%d1 \n\t" \ + "addxl %%d0, %%d4 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d3:%%d1 \n\t" \ + "addxl %%d4, %%d1 \n\t" \ + "addxl %%d0, %%d3 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d4:%%d1 \n\t" \ + "addxl %%d3, %%d1 \n\t" \ + "addxl %%d0, %%d4 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d3:%%d1 \n\t" \ + "addxl %%d4, %%d1 \n\t" \ + "addxl %%d0, %%d3 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d4:%%d1 \n\t" \ + "addxl %%d3, %%d1 \n\t" \ + "addxl %%d0, %%d4 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "movel %%a2@+, %%d1 \n\t" \ + "mulul %%d2, %%d3:%%d1 \n\t" \ + "addxl %%d4, %%d1 \n\t" \ + "addxl %%d0, %%d3 \n\t" \ + "addl %%d1, %%a3@+ \n\t" \ + "addxl %%d0, %%d3 \n\t" + +#endif /* MC68000 */ + +#if defined(__powerpc64__) || defined(__ppc64__) + +#if defined(__MACH__) && defined(__APPLE__) + +#define MULADDC_INIT \ + asm( \ + "ld r3, %3 \n\t" \ + "ld r4, %4 \n\t" \ + "ld r5, %5 \n\t" \ + "ld r6, %6 \n\t" \ + "addi r3, r3, -8 \n\t" \ + "addi r4, r4, -8 \n\t" \ + "addic r5, r5, 0 \n\t" + +#define MULADDC_CORE \ + "ldu r7, 8(r3) \n\t" \ + "mulld r8, r7, r6 \n\t" \ + "mulhdu r9, r7, r6 \n\t" \ + "adde r8, r8, r5 \n\t" \ + "ld r7, 8(r4) \n\t" \ + "addze r5, r9 \n\t" \ + "addc r8, r8, r7 \n\t" \ + "stdu r8, 8(r4) \n\t" + +#define MULADDC_STOP \ + "addze r5, r5 \n\t" \ + "addi r4, r4, 8 \n\t" \ + "addi r3, r3, 8 \n\t" \ + "std r5, %0 \n\t" \ + "std r4, %1 \n\t" \ + "std r3, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "r3", "r4", "r5", "r6", "r7", "r8", "r9" \ + ); + + +#else /* __MACH__ && __APPLE__ */ + +#define MULADDC_INIT \ + asm( \ + "ld %%r3, %3 \n\t" \ + "ld %%r4, %4 \n\t" \ + "ld %%r5, %5 \n\t" \ + "ld %%r6, %6 \n\t" \ + "addi %%r3, %%r3, -8 \n\t" \ + "addi %%r4, %%r4, -8 \n\t" \ + "addic %%r5, %%r5, 0 \n\t" + +#define MULADDC_CORE \ + "ldu %%r7, 8(%%r3) \n\t" \ + "mulld %%r8, %%r7, %%r6 \n\t" \ + "mulhdu %%r9, %%r7, %%r6 \n\t" \ + "adde %%r8, %%r8, %%r5 \n\t" \ + "ld %%r7, 8(%%r4) \n\t" \ + "addze %%r5, %%r9 \n\t" \ + "addc %%r8, %%r8, %%r7 \n\t" \ + "stdu %%r8, 8(%%r4) \n\t" + +#define MULADDC_STOP \ + "addze %%r5, %%r5 \n\t" \ + "addi %%r4, %%r4, 8 \n\t" \ + "addi %%r3, %%r3, 8 \n\t" \ + "std %%r5, %0 \n\t" \ + "std %%r4, %1 \n\t" \ + "std %%r3, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "r3", "r4", "r5", "r6", "r7", "r8", "r9" \ + ); + +#endif /* __MACH__ && __APPLE__ */ + +#elif defined(__powerpc__) || defined(__ppc__) /* end PPC64/begin PPC32 */ + +#if defined(__MACH__) && defined(__APPLE__) + +#define MULADDC_INIT \ + asm( \ + "lwz r3, %3 \n\t" \ + "lwz r4, %4 \n\t" \ + "lwz r5, %5 \n\t" \ + "lwz r6, %6 \n\t" \ + "addi r3, r3, -4 \n\t" \ + "addi r4, r4, -4 \n\t" \ + "addic r5, r5, 0 \n\t" + +#define MULADDC_CORE \ + "lwzu r7, 4(r3) \n\t" \ + "mullw r8, r7, r6 \n\t" \ + "mulhwu r9, r7, r6 \n\t" \ + "adde r8, r8, r5 \n\t" \ + "lwz r7, 4(r4) \n\t" \ + "addze r5, r9 \n\t" \ + "addc r8, r8, r7 \n\t" \ + "stwu r8, 4(r4) \n\t" + +#define MULADDC_STOP \ + "addze r5, r5 \n\t" \ + "addi r4, r4, 4 \n\t" \ + "addi r3, r3, 4 \n\t" \ + "stw r5, %0 \n\t" \ + "stw r4, %1 \n\t" \ + "stw r3, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "r3", "r4", "r5", "r6", "r7", "r8", "r9" \ + ); + +#else /* __MACH__ && __APPLE__ */ + +#define MULADDC_INIT \ + asm( \ + "lwz %%r3, %3 \n\t" \ + "lwz %%r4, %4 \n\t" \ + "lwz %%r5, %5 \n\t" \ + "lwz %%r6, %6 \n\t" \ + "addi %%r3, %%r3, -4 \n\t" \ + "addi %%r4, %%r4, -4 \n\t" \ + "addic %%r5, %%r5, 0 \n\t" + +#define MULADDC_CORE \ + "lwzu %%r7, 4(%%r3) \n\t" \ + "mullw %%r8, %%r7, %%r6 \n\t" \ + "mulhwu %%r9, %%r7, %%r6 \n\t" \ + "adde %%r8, %%r8, %%r5 \n\t" \ + "lwz %%r7, 4(%%r4) \n\t" \ + "addze %%r5, %%r9 \n\t" \ + "addc %%r8, %%r8, %%r7 \n\t" \ + "stwu %%r8, 4(%%r4) \n\t" + +#define MULADDC_STOP \ + "addze %%r5, %%r5 \n\t" \ + "addi %%r4, %%r4, 4 \n\t" \ + "addi %%r3, %%r3, 4 \n\t" \ + "stw %%r5, %0 \n\t" \ + "stw %%r4, %1 \n\t" \ + "stw %%r3, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "r3", "r4", "r5", "r6", "r7", "r8", "r9" \ + ); + +#endif /* __MACH__ && __APPLE__ */ + +#endif /* PPC32 */ + +/* + * The Sparc(64) assembly is reported to be broken. + * Disable it for now, until we're able to fix it. + */ +#if 0 && defined(__sparc__) +#if defined(__sparc64__) + +#define MULADDC_INIT \ + asm( \ + "ldx %3, %%o0 \n\t" \ + "ldx %4, %%o1 \n\t" \ + "ld %5, %%o2 \n\t" \ + "ld %6, %%o3 \n\t" + +#define MULADDC_CORE \ + "ld [%%o0], %%o4 \n\t" \ + "inc 4, %%o0 \n\t" \ + "ld [%%o1], %%o5 \n\t" \ + "umul %%o3, %%o4, %%o4 \n\t" \ + "addcc %%o4, %%o2, %%o4 \n\t" \ + "rd %%y, %%g1 \n\t" \ + "addx %%g1, 0, %%g1 \n\t" \ + "addcc %%o4, %%o5, %%o4 \n\t" \ + "st %%o4, [%%o1] \n\t" \ + "addx %%g1, 0, %%o2 \n\t" \ + "inc 4, %%o1 \n\t" + + #define MULADDC_STOP \ + "st %%o2, %0 \n\t" \ + "stx %%o1, %1 \n\t" \ + "stx %%o0, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "g1", "o0", "o1", "o2", "o3", "o4", \ + "o5" \ + ); + +#else /* __sparc64__ */ + +#define MULADDC_INIT \ + asm( \ + "ld %3, %%o0 \n\t" \ + "ld %4, %%o1 \n\t" \ + "ld %5, %%o2 \n\t" \ + "ld %6, %%o3 \n\t" + +#define MULADDC_CORE \ + "ld [%%o0], %%o4 \n\t" \ + "inc 4, %%o0 \n\t" \ + "ld [%%o1], %%o5 \n\t" \ + "umul %%o3, %%o4, %%o4 \n\t" \ + "addcc %%o4, %%o2, %%o4 \n\t" \ + "rd %%y, %%g1 \n\t" \ + "addx %%g1, 0, %%g1 \n\t" \ + "addcc %%o4, %%o5, %%o4 \n\t" \ + "st %%o4, [%%o1] \n\t" \ + "addx %%g1, 0, %%o2 \n\t" \ + "inc 4, %%o1 \n\t" + +#define MULADDC_STOP \ + "st %%o2, %0 \n\t" \ + "st %%o1, %1 \n\t" \ + "st %%o0, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "g1", "o0", "o1", "o2", "o3", "o4", \ + "o5" \ + ); + +#endif /* __sparc64__ */ +#endif /* __sparc__ */ + +#if defined(__microblaze__) || defined(microblaze) + +#define MULADDC_INIT \ + asm( \ + "lwi r3, %3 \n\t" \ + "lwi r4, %4 \n\t" \ + "lwi r5, %5 \n\t" \ + "lwi r6, %6 \n\t" \ + "andi r7, r6, 0xffff \n\t" \ + "bsrli r6, r6, 16 \n\t" + +#define MULADDC_CORE \ + "lhui r8, r3, 0 \n\t" \ + "addi r3, r3, 2 \n\t" \ + "lhui r9, r3, 0 \n\t" \ + "addi r3, r3, 2 \n\t" \ + "mul r10, r9, r6 \n\t" \ + "mul r11, r8, r7 \n\t" \ + "mul r12, r9, r7 \n\t" \ + "mul r13, r8, r6 \n\t" \ + "bsrli r8, r10, 16 \n\t" \ + "bsrli r9, r11, 16 \n\t" \ + "add r13, r13, r8 \n\t" \ + "add r13, r13, r9 \n\t" \ + "bslli r10, r10, 16 \n\t" \ + "bslli r11, r11, 16 \n\t" \ + "add r12, r12, r10 \n\t" \ + "addc r13, r13, r0 \n\t" \ + "add r12, r12, r11 \n\t" \ + "addc r13, r13, r0 \n\t" \ + "lwi r10, r4, 0 \n\t" \ + "add r12, r12, r10 \n\t" \ + "addc r13, r13, r0 \n\t" \ + "add r12, r12, r5 \n\t" \ + "addc r5, r13, r0 \n\t" \ + "swi r12, r4, 0 \n\t" \ + "addi r4, r4, 4 \n\t" + +#define MULADDC_STOP \ + "swi r5, %0 \n\t" \ + "swi r4, %1 \n\t" \ + "swi r3, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "r3", "r4", "r5", "r6", "r7", "r8", \ + "r9", "r10", "r11", "r12", "r13" \ + ); + +#endif /* MicroBlaze */ + +#if defined(__tricore__) + +#define MULADDC_INIT \ + asm( \ + "ld.a %%a2, %3 \n\t" \ + "ld.a %%a3, %4 \n\t" \ + "ld.w %%d4, %5 \n\t" \ + "ld.w %%d1, %6 \n\t" \ + "xor %%d5, %%d5 \n\t" + +#define MULADDC_CORE \ + "ld.w %%d0, [%%a2+] \n\t" \ + "madd.u %%e2, %%e4, %%d0, %%d1 \n\t" \ + "ld.w %%d0, [%%a3] \n\t" \ + "addx %%d2, %%d2, %%d0 \n\t" \ + "addc %%d3, %%d3, 0 \n\t" \ + "mov %%d4, %%d3 \n\t" \ + "st.w [%%a3+], %%d2 \n\t" + +#define MULADDC_STOP \ + "st.w %0, %%d4 \n\t" \ + "st.a %1, %%a3 \n\t" \ + "st.a %2, %%a2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "d0", "d1", "e2", "d4", "a2", "a3" \ + ); + +#endif /* TriCore */ + +/* + * Note, gcc -O0 by default uses r7 for the frame pointer, so it complains about + * our use of r7 below, unless -fomit-frame-pointer is passed. + * + * On the other hand, -fomit-frame-pointer is implied by any -Ox options with + * x !=0, which we can detect using __OPTIMIZE__ (which is also defined by + * clang and armcc5 under the same conditions). + * + * So, only use the optimized assembly below for optimized build, which avoids + * the build error and is pretty reasonable anyway. + */ +#if defined(__GNUC__) && !defined(__OPTIMIZE__) +#define MULADDC_CANNOT_USE_R7 +#endif + +#if defined(__arm__) && !defined(MULADDC_CANNOT_USE_R7) + +#if defined(__thumb__) && !defined(__thumb2__) + +#define MULADDC_INIT \ + asm( \ + "ldr r0, %3 \n\t" \ + "ldr r1, %4 \n\t" \ + "ldr r2, %5 \n\t" \ + "ldr r3, %6 \n\t" \ + "lsr r7, r3, #16 \n\t" \ + "mov r9, r7 \n\t" \ + "lsl r7, r3, #16 \n\t" \ + "lsr r7, r7, #16 \n\t" \ + "mov r8, r7 \n\t" + +#define MULADDC_CORE \ + "ldmia r0!, {r6} \n\t" \ + "lsr r7, r6, #16 \n\t" \ + "lsl r6, r6, #16 \n\t" \ + "lsr r6, r6, #16 \n\t" \ + "mov r4, r8 \n\t" \ + "mul r4, r6 \n\t" \ + "mov r3, r9 \n\t" \ + "mul r6, r3 \n\t" \ + "mov r5, r9 \n\t" \ + "mul r5, r7 \n\t" \ + "mov r3, r8 \n\t" \ + "mul r7, r3 \n\t" \ + "lsr r3, r6, #16 \n\t" \ + "add r5, r5, r3 \n\t" \ + "lsr r3, r7, #16 \n\t" \ + "add r5, r5, r3 \n\t" \ + "add r4, r4, r2 \n\t" \ + "mov r2, #0 \n\t" \ + "adc r5, r2 \n\t" \ + "lsl r3, r6, #16 \n\t" \ + "add r4, r4, r3 \n\t" \ + "adc r5, r2 \n\t" \ + "lsl r3, r7, #16 \n\t" \ + "add r4, r4, r3 \n\t" \ + "adc r5, r2 \n\t" \ + "ldr r3, [r1] \n\t" \ + "add r4, r4, r3 \n\t" \ + "adc r2, r5 \n\t" \ + "stmia r1!, {r4} \n\t" + +#define MULADDC_STOP \ + "str r2, %0 \n\t" \ + "str r1, %1 \n\t" \ + "str r0, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "r0", "r1", "r2", "r3", "r4", "r5", \ + "r6", "r7", "r8", "r9", "cc" \ + ); + +#elif defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1) + +#define MULADDC_INIT \ + asm( + +#define MULADDC_CORE \ + "ldr r0, [%0], #4 \n\t" \ + "ldr r1, [%1] \n\t" \ + "umaal r1, %2, %3, r0 \n\t" \ + "str r1, [%1], #4 \n\t" + +#define MULADDC_STOP \ + : "=r" (s), "=r" (d), "=r" (c) \ + : "r" (b), "0" (s), "1" (d), "2" (c) \ + : "r0", "r1", "memory" \ + ); + +#else + +#define MULADDC_INIT \ + asm( \ + "ldr r0, %3 \n\t" \ + "ldr r1, %4 \n\t" \ + "ldr r2, %5 \n\t" \ + "ldr r3, %6 \n\t" + +#define MULADDC_CORE \ + "ldr r4, [r0], #4 \n\t" \ + "mov r5, #0 \n\t" \ + "ldr r6, [r1] \n\t" \ + "umlal r2, r5, r3, r4 \n\t" \ + "adds r7, r6, r2 \n\t" \ + "adc r2, r5, #0 \n\t" \ + "str r7, [r1], #4 \n\t" + +#define MULADDC_STOP \ + "str r2, %0 \n\t" \ + "str r1, %1 \n\t" \ + "str r0, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "r0", "r1", "r2", "r3", "r4", "r5", \ + "r6", "r7", "cc" \ + ); + +#endif /* Thumb */ + +#endif /* ARMv3 */ + +#if defined(__alpha__) + +#define MULADDC_INIT \ + asm( \ + "ldq $1, %3 \n\t" \ + "ldq $2, %4 \n\t" \ + "ldq $3, %5 \n\t" \ + "ldq $4, %6 \n\t" + +#define MULADDC_CORE \ + "ldq $6, 0($1) \n\t" \ + "addq $1, 8, $1 \n\t" \ + "mulq $6, $4, $7 \n\t" \ + "umulh $6, $4, $6 \n\t" \ + "addq $7, $3, $7 \n\t" \ + "cmpult $7, $3, $3 \n\t" \ + "ldq $5, 0($2) \n\t" \ + "addq $7, $5, $7 \n\t" \ + "cmpult $7, $5, $5 \n\t" \ + "stq $7, 0($2) \n\t" \ + "addq $2, 8, $2 \n\t" \ + "addq $6, $3, $3 \n\t" \ + "addq $5, $3, $3 \n\t" + +#define MULADDC_STOP \ + "stq $3, %0 \n\t" \ + "stq $2, %1 \n\t" \ + "stq $1, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "$1", "$2", "$3", "$4", "$5", "$6", "$7" \ + ); +#endif /* Alpha */ + +#if defined(__mips__) && !defined(__mips64) + +#define MULADDC_INIT \ + asm( \ + "lw $10, %3 \n\t" \ + "lw $11, %4 \n\t" \ + "lw $12, %5 \n\t" \ + "lw $13, %6 \n\t" + +#define MULADDC_CORE \ + "lw $14, 0($10) \n\t" \ + "multu $13, $14 \n\t" \ + "addi $10, $10, 4 \n\t" \ + "mflo $14 \n\t" \ + "mfhi $9 \n\t" \ + "addu $14, $12, $14 \n\t" \ + "lw $15, 0($11) \n\t" \ + "sltu $12, $14, $12 \n\t" \ + "addu $15, $14, $15 \n\t" \ + "sltu $14, $15, $14 \n\t" \ + "addu $12, $12, $9 \n\t" \ + "sw $15, 0($11) \n\t" \ + "addu $12, $12, $14 \n\t" \ + "addi $11, $11, 4 \n\t" + +#define MULADDC_STOP \ + "sw $12, %0 \n\t" \ + "sw $11, %1 \n\t" \ + "sw $10, %2 \n\t" \ + : "=m" (c), "=m" (d), "=m" (s) \ + : "m" (s), "m" (d), "m" (c), "m" (b) \ + : "$9", "$10", "$11", "$12", "$13", "$14", "$15", "lo", "hi" \ + ); + +#endif /* MIPS */ +#endif /* GNUC */ + +#if (defined(_MSC_VER) && defined(_M_IX86)) || defined(__WATCOMC__) + +#define MULADDC_INIT \ + __asm mov esi, s \ + __asm mov edi, d \ + __asm mov ecx, c \ + __asm mov ebx, b + +#define MULADDC_CORE \ + __asm lodsd \ + __asm mul ebx \ + __asm add eax, ecx \ + __asm adc edx, 0 \ + __asm add eax, [edi] \ + __asm adc edx, 0 \ + __asm mov ecx, edx \ + __asm stosd + +#if defined(MBEDTLS_HAVE_SSE2) + +#define EMIT __asm _emit + +#define MULADDC_HUIT \ + EMIT 0x0F EMIT 0x6E EMIT 0xC9 \ + EMIT 0x0F EMIT 0x6E EMIT 0xC3 \ + EMIT 0x0F EMIT 0x6E EMIT 0x1F \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCB \ + EMIT 0x0F EMIT 0x6E EMIT 0x16 \ + EMIT 0x0F EMIT 0xF4 EMIT 0xD0 \ + EMIT 0x0F EMIT 0x6E EMIT 0x66 EMIT 0x04 \ + EMIT 0x0F EMIT 0xF4 EMIT 0xE0 \ + EMIT 0x0F EMIT 0x6E EMIT 0x76 EMIT 0x08 \ + EMIT 0x0F EMIT 0xF4 EMIT 0xF0 \ + EMIT 0x0F EMIT 0x6E EMIT 0x7E EMIT 0x0C \ + EMIT 0x0F EMIT 0xF4 EMIT 0xF8 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCA \ + EMIT 0x0F EMIT 0x6E EMIT 0x5F EMIT 0x04 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xDC \ + EMIT 0x0F EMIT 0x6E EMIT 0x6F EMIT 0x08 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xEE \ + EMIT 0x0F EMIT 0x6E EMIT 0x67 EMIT 0x0C \ + EMIT 0x0F EMIT 0xD4 EMIT 0xFC \ + EMIT 0x0F EMIT 0x7E EMIT 0x0F \ + EMIT 0x0F EMIT 0x6E EMIT 0x56 EMIT 0x10 \ + EMIT 0x0F EMIT 0xF4 EMIT 0xD0 \ + EMIT 0x0F EMIT 0x73 EMIT 0xD1 EMIT 0x20 \ + EMIT 0x0F EMIT 0x6E EMIT 0x66 EMIT 0x14 \ + EMIT 0x0F EMIT 0xF4 EMIT 0xE0 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCB \ + EMIT 0x0F EMIT 0x6E EMIT 0x76 EMIT 0x18 \ + EMIT 0x0F EMIT 0xF4 EMIT 0xF0 \ + EMIT 0x0F EMIT 0x7E EMIT 0x4F EMIT 0x04 \ + EMIT 0x0F EMIT 0x73 EMIT 0xD1 EMIT 0x20 \ + EMIT 0x0F EMIT 0x6E EMIT 0x5E EMIT 0x1C \ + EMIT 0x0F EMIT 0xF4 EMIT 0xD8 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCD \ + EMIT 0x0F EMIT 0x6E EMIT 0x6F EMIT 0x10 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xD5 \ + EMIT 0x0F EMIT 0x7E EMIT 0x4F EMIT 0x08 \ + EMIT 0x0F EMIT 0x73 EMIT 0xD1 EMIT 0x20 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCF \ + EMIT 0x0F EMIT 0x6E EMIT 0x6F EMIT 0x14 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xE5 \ + EMIT 0x0F EMIT 0x7E EMIT 0x4F EMIT 0x0C \ + EMIT 0x0F EMIT 0x73 EMIT 0xD1 EMIT 0x20 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCA \ + EMIT 0x0F EMIT 0x6E EMIT 0x6F EMIT 0x18 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xF5 \ + EMIT 0x0F EMIT 0x7E EMIT 0x4F EMIT 0x10 \ + EMIT 0x0F EMIT 0x73 EMIT 0xD1 EMIT 0x20 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCC \ + EMIT 0x0F EMIT 0x6E EMIT 0x6F EMIT 0x1C \ + EMIT 0x0F EMIT 0xD4 EMIT 0xDD \ + EMIT 0x0F EMIT 0x7E EMIT 0x4F EMIT 0x14 \ + EMIT 0x0F EMIT 0x73 EMIT 0xD1 EMIT 0x20 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCE \ + EMIT 0x0F EMIT 0x7E EMIT 0x4F EMIT 0x18 \ + EMIT 0x0F EMIT 0x73 EMIT 0xD1 EMIT 0x20 \ + EMIT 0x0F EMIT 0xD4 EMIT 0xCB \ + EMIT 0x0F EMIT 0x7E EMIT 0x4F EMIT 0x1C \ + EMIT 0x83 EMIT 0xC7 EMIT 0x20 \ + EMIT 0x83 EMIT 0xC6 EMIT 0x20 \ + EMIT 0x0F EMIT 0x73 EMIT 0xD1 EMIT 0x20 \ + EMIT 0x0F EMIT 0x7E EMIT 0xC9 + +#define MULADDC_STOP \ + EMIT 0x0F EMIT 0x77 \ + __asm mov c, ecx \ + __asm mov d, edi \ + __asm mov s, esi \ + +#else + +#define MULADDC_STOP \ + __asm mov c, ecx \ + __asm mov d, edi \ + __asm mov s, esi \ + +#endif /* SSE2 */ +#endif /* MSVC */ + +#endif /* MBEDTLS_HAVE_ASM */ + +#if !defined(MULADDC_CORE) +#if defined(MBEDTLS_HAVE_UDBL) + +#define MULADDC_INIT \ +{ \ + mbedtls_t_udbl r; \ + mbedtls_mpi_uint r0, r1; + +#define MULADDC_CORE \ + r = *(s++) * (mbedtls_t_udbl) b; \ + r0 = (mbedtls_mpi_uint) r; \ + r1 = (mbedtls_mpi_uint)( r >> biL ); \ + r0 += c; r1 += (r0 < c); \ + r0 += *d; r1 += (r0 < *d); \ + c = r1; *(d++) = r0; + +#define MULADDC_STOP \ +} + +#else +#define MULADDC_INIT \ +{ \ + mbedtls_mpi_uint s0, s1, b0, b1; \ + mbedtls_mpi_uint r0, r1, rx, ry; \ + b0 = ( b << biH ) >> biH; \ + b1 = ( b >> biH ); + +#define MULADDC_CORE \ + s0 = ( *s << biH ) >> biH; \ + s1 = ( *s >> biH ); s++; \ + rx = s0 * b1; r0 = s0 * b0; \ + ry = s1 * b0; r1 = s1 * b1; \ + r1 += ( rx >> biH ); \ + r1 += ( ry >> biH ); \ + rx <<= biH; ry <<= biH; \ + r0 += rx; r1 += (r0 < rx); \ + r0 += ry; r1 += (r0 < ry); \ + r0 += c; r1 += (r0 < c); \ + r0 += *d; r1 += (r0 < *d); \ + c = r1; *(d++) = r0; + +#define MULADDC_STOP \ +} + +#endif /* C (generic) */ +#endif /* C (longlong) */ + +#endif /* bn_mul.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/camellia.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/camellia.h new file mode 100644 index 000000000..3eeb66366 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/camellia.h @@ -0,0 +1,326 @@ +/** + * \file camellia.h + * + * \brief Camellia block cipher + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_CAMELLIA_H +#define MBEDTLS_CAMELLIA_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +#include "platform_util.h" + +#define MBEDTLS_CAMELLIA_ENCRYPT 1 +#define MBEDTLS_CAMELLIA_DECRYPT 0 + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0024 ) +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ +#define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024 /**< Bad input data. */ + +#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */ + +/* MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED is deprecated and should not be used. + */ +#define MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED -0x0027 /**< Camellia hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_CAMELLIA_ALT) +// Regular implementation +// + +/** + * \brief CAMELLIA context structure + */ +typedef struct mbedtls_camellia_context +{ + int nr; /*!< number of rounds */ + uint32_t rk[68]; /*!< CAMELLIA round keys */ +} +mbedtls_camellia_context; + +#else /* MBEDTLS_CAMELLIA_ALT */ +#include "camellia_alt.h" +#endif /* MBEDTLS_CAMELLIA_ALT */ + +/** + * \brief Initialize a CAMELLIA context. + * + * \param ctx The CAMELLIA context to be initialized. + * This must not be \c NULL. + */ +void mbedtls_camellia_init( mbedtls_camellia_context *ctx ); + +/** + * \brief Clear a CAMELLIA context. + * + * \param ctx The CAMELLIA context to be cleared. This may be \c NULL, + * in which case this function returns immediately. If it is not + * \c NULL, it must be initialized. + */ +void mbedtls_camellia_free( mbedtls_camellia_context *ctx ); + +/** + * \brief Perform a CAMELLIA key schedule operation for encryption. + * + * \param ctx The CAMELLIA context to use. This must be initialized. + * \param key The encryption key to use. This must be a readable buffer + * of size \p keybits Bits. + * \param keybits The length of \p key in Bits. This must be either \c 128, + * \c 192 or \c 256. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief Perform a CAMELLIA key schedule operation for decryption. + * + * \param ctx The CAMELLIA context to use. This must be initialized. + * \param key The decryption key. This must be a readable buffer + * of size \p keybits Bits. + * \param keybits The length of \p key in Bits. This must be either \c 128, + * \c 192 or \c 256. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief Perform a CAMELLIA-ECB block encryption/decryption operation. + * + * \param ctx The CAMELLIA context to use. This must be initialized + * and bound to a key. + * \param mode The mode of operation. This must be either + * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. + * \param input The input block. This must be a readable buffer + * of size \c 16 Bytes. + * \param output The output block. This must be a writable buffer + * of size \c 16 Bytes. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx, + int mode, + const unsigned char input[16], + unsigned char output[16] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief Perform a CAMELLIA-CBC buffer encryption/decryption operation. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx The CAMELLIA context to use. This must be initialized + * and bound to a key. + * \param mode The mode of operation. This must be either + * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. + * \param length The length in Bytes of the input data \p input. + * This must be a multiple of \c 16 Bytes. + * \param iv The initialization vector. This must be a read/write buffer + * of length \c 16 Bytes. It is updated to allow streaming + * use as explained above. + * \param input The buffer holding the input data. This must point to a + * readable buffer of length \p length Bytes. + * \param output The buffer holding the output data. This must point to a + * writable buffer of length \p length Bytes. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx, + int mode, + size_t length, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +#if defined(MBEDTLS_CIPHER_MODE_CFB) +/** + * \brief Perform a CAMELLIA-CFB128 buffer encryption/decryption + * operation. + * + * \note Due to the nature of CFB mode, you should use the same + * key for both encryption and decryption. In particular, calls + * to this function should be preceded by a key-schedule via + * mbedtls_camellia_setkey_enc() regardless of whether \p mode + * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx The CAMELLIA context to use. This must be initialized + * and bound to a key. + * \param mode The mode of operation. This must be either + * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. + * \param length The length of the input data \p input. Any value is allowed. + * \param iv_off The current offset in the IV. This must be smaller + * than \c 16 Bytes. It is updated after this call to allow + * the aforementioned streaming usage. + * \param iv The initialization vector. This must be a read/write buffer + * of length \c 16 Bytes. It is updated after this call to + * allow the aforementioned streaming usage. + * \param input The buffer holding the input data. This must be a readable + * buffer of size \p length Bytes. + * \param output The buffer to hold the output data. This must be a writable + * buffer of length \p length Bytes. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx, + int mode, + size_t length, + size_t *iv_off, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CFB */ + +#if defined(MBEDTLS_CIPHER_MODE_CTR) +/** + * \brief Perform a CAMELLIA-CTR buffer encryption/decryption operation. + * + * *note Due to the nature of CTR mode, you should use the same + * key for both encryption and decryption. In particular, calls + * to this function should be preceded by a key-schedule via + * mbedtls_camellia_setkey_enc() regardless of whether \p mode + * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. + * + * \warning You must never reuse a nonce value with the same key. Doing so + * would void the encryption for the two messages encrypted with + * the same nonce and key. + * + * There are two common strategies for managing nonces with CTR: + * + * 1. You can handle everything as a single message processed over + * successive calls to this function. In that case, you want to + * set \p nonce_counter and \p nc_off to 0 for the first call, and + * then preserve the values of \p nonce_counter, \p nc_off and \p + * stream_block across calls to this function as they will be + * updated by this function. + * + * With this strategy, you must not encrypt more than 2**128 + * blocks of data with the same key. + * + * 2. You can encrypt separate messages by dividing the \p + * nonce_counter buffer in two areas: the first one used for a + * per-message nonce, handled by yourself, and the second one + * updated by this function internally. + * + * For example, you might reserve the first \c 12 Bytes for the + * per-message nonce, and the last \c 4 Bytes for internal use. + * In that case, before calling this function on a new message you + * need to set the first \c 12 Bytes of \p nonce_counter to your + * chosen nonce value, the last four to \c 0, and \p nc_off to \c 0 + * (which will cause \p stream_block to be ignored). That way, you + * can encrypt at most \c 2**96 messages of up to \c 2**32 blocks + * each with the same key. + * + * The per-message nonce (or information sufficient to reconstruct + * it) needs to be communicated with the ciphertext and must be + * unique. The recommended way to ensure uniqueness is to use a + * message counter. An alternative is to generate random nonces, + * but this limits the number of messages that can be securely + * encrypted: for example, with 96-bit random nonces, you should + * not encrypt more than 2**32 messages with the same key. + * + * Note that for both stategies, sizes are measured in blocks and + * that a CAMELLIA block is \c 16 Bytes. + * + * \warning Upon return, \p stream_block contains sensitive data. Its + * content must not be written to insecure storage and should be + * securely discarded as soon as it's no longer needed. + * + * \param ctx The CAMELLIA context to use. This must be initialized + * and bound to a key. + * \param length The length of the input data \p input in Bytes. + * Any value is allowed. + * \param nc_off The offset in the current \p stream_block (for resuming + * within current cipher stream). The offset pointer to + * should be \c 0 at the start of a stream. It is updated + * at the end of this call. + * \param nonce_counter The 128-bit nonce and counter. This must be a read/write + * buffer of length \c 16 Bytes. + * \param stream_block The saved stream-block for resuming. This must be a + * read/write buffer of length \c 16 Bytes. + * \param input The input data stream. This must be a readable buffer of + * size \p length Bytes. + * \param output The output data stream. This must be a writable buffer + * of size \p length Bytes. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx, + size_t length, + size_t *nc_off, + unsigned char nonce_counter[16], + unsigned char stream_block[16], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CTR */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_camellia_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* camellia.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ccm.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ccm.h new file mode 100644 index 000000000..f03e3b580 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ccm.h @@ -0,0 +1,310 @@ +/** + * \file ccm.h + * + * \brief This file provides an API for the CCM authenticated encryption + * mode for block ciphers. + * + * CCM combines Counter mode encryption with CBC-MAC authentication + * for 128-bit block ciphers. + * + * Input to CCM includes the following elements: + * <ul><li>Payload - data that is both authenticated and encrypted.</li> + * <li>Associated data (Adata) - data that is authenticated but not + * encrypted, For example, a header.</li> + * <li>Nonce - A unique value that is assigned to the payload and the + * associated data.</li></ul> + * + * Definition of CCM: + * http://csrc.nist.gov/publications/nistpubs/800-38C/SP800-38C_updated-July20_2007.pdf + * RFC 3610 "Counter with CBC-MAC (CCM)" + * + * Related: + * RFC 5116 "An Interface and Algorithms for Authenticated Encryption" + * + * Definition of CCM*: + * IEEE 802.15.4 - IEEE Standard for Local and metropolitan area networks + * Integer representation is fixed most-significant-octet-first order and + * the representation of octets is most-significant-bit-first order. This is + * consistent with RFC 3610. + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_CCM_H +#define MBEDTLS_CCM_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "cipher.h" + +#define MBEDTLS_ERR_CCM_BAD_INPUT -0x000D /**< Bad input parameters to the function. */ +#define MBEDTLS_ERR_CCM_AUTH_FAILED -0x000F /**< Authenticated decryption failed. */ + +/* MBEDTLS_ERR_CCM_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_CCM_HW_ACCEL_FAILED -0x0011 /**< CCM hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_CCM_ALT) +// Regular implementation +// + +/** + * \brief The CCM context-type definition. The CCM context is passed + * to the APIs called. + */ +typedef struct mbedtls_ccm_context +{ + mbedtls_cipher_context_t cipher_ctx; /*!< The cipher context used. */ +} +mbedtls_ccm_context; + +#else /* MBEDTLS_CCM_ALT */ +#include "ccm_alt.h" +#endif /* MBEDTLS_CCM_ALT */ + +/** + * \brief This function initializes the specified CCM context, + * to make references valid, and prepare the context + * for mbedtls_ccm_setkey() or mbedtls_ccm_free(). + * + * \param ctx The CCM context to initialize. This must not be \c NULL. + */ +void mbedtls_ccm_init( mbedtls_ccm_context *ctx ); + +/** + * \brief This function initializes the CCM context set in the + * \p ctx parameter and sets the encryption key. + * + * \param ctx The CCM context to initialize. This must be an initialized + * context. + * \param cipher The 128-bit block cipher to use. + * \param key The encryption key. This must not be \c NULL. + * \param keybits The key size in bits. This must be acceptable by the cipher. + * + * \return \c 0 on success. + * \return A CCM or cipher-specific error code on failure. + */ +int mbedtls_ccm_setkey( mbedtls_ccm_context *ctx, + mbedtls_cipher_id_t cipher, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief This function releases and clears the specified CCM context + * and underlying cipher sub-context. + * + * \param ctx The CCM context to clear. If this is \c NULL, the function + * has no effect. Otherwise, this must be initialized. + */ +void mbedtls_ccm_free( mbedtls_ccm_context *ctx ); + +/** + * \brief This function encrypts a buffer using CCM. + * + * \note The tag is written to a separate buffer. To concatenate + * the \p tag with the \p output, as done in <em>RFC-3610: + * Counter with CBC-MAC (CCM)</em>, use + * \p tag = \p output + \p length, and make sure that the + * output buffer is at least \p length + \p tag_len wide. + * + * \param ctx The CCM context to use for encryption. This must be + * initialized and bound to a key. + * \param length The length of the input data in Bytes. + * \param iv The initialization vector (nonce). This must be a readable + * buffer of at least \p iv_len Bytes. + * \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12, + * or 13. The length L of the message length field is + * 15 - \p iv_len. + * \param add The additional data field. If \p add_len is greater than + * zero, \p add must be a readable buffer of at least that + * length. + * \param add_len The length of additional data in Bytes. + * This must be less than `2^16 - 2^8`. + * \param input The buffer holding the input data. If \p length is greater + * than zero, \p input must be a readable buffer of at least + * that length. + * \param output The buffer holding the output data. If \p length is greater + * than zero, \p output must be a writable buffer of at least + * that length. + * \param tag The buffer holding the authentication field. This must be a + * readable buffer of at least \p tag_len Bytes. + * \param tag_len The length of the authentication field to generate in Bytes: + * 4, 6, 8, 10, 12, 14 or 16. + * + * \return \c 0 on success. + * \return A CCM or cipher-specific error code on failure. + */ +int mbedtls_ccm_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length, + const unsigned char *iv, size_t iv_len, + const unsigned char *add, size_t add_len, + const unsigned char *input, unsigned char *output, + unsigned char *tag, size_t tag_len ); + +/** + * \brief This function encrypts a buffer using CCM*. + * + * \note The tag is written to a separate buffer. To concatenate + * the \p tag with the \p output, as done in <em>RFC-3610: + * Counter with CBC-MAC (CCM)</em>, use + * \p tag = \p output + \p length, and make sure that the + * output buffer is at least \p length + \p tag_len wide. + * + * \note When using this function in a variable tag length context, + * the tag length has to be encoded into the \p iv passed to + * this function. + * + * \param ctx The CCM context to use for encryption. This must be + * initialized and bound to a key. + * \param length The length of the input data in Bytes. + * \param iv The initialization vector (nonce). This must be a readable + * buffer of at least \p iv_len Bytes. + * \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12, + * or 13. The length L of the message length field is + * 15 - \p iv_len. + * \param add The additional data field. This must be a readable buffer of + * at least \p add_len Bytes. + * \param add_len The length of additional data in Bytes. + * This must be less than 2^16 - 2^8. + * \param input The buffer holding the input data. If \p length is greater + * than zero, \p input must be a readable buffer of at least + * that length. + * \param output The buffer holding the output data. If \p length is greater + * than zero, \p output must be a writable buffer of at least + * that length. + * \param tag The buffer holding the authentication field. This must be a + * readable buffer of at least \p tag_len Bytes. + * \param tag_len The length of the authentication field to generate in Bytes: + * 0, 4, 6, 8, 10, 12, 14 or 16. + * + * \warning Passing \c 0 as \p tag_len means that the message is no + * longer authenticated. + * + * \return \c 0 on success. + * \return A CCM or cipher-specific error code on failure. + */ +int mbedtls_ccm_star_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length, + const unsigned char *iv, size_t iv_len, + const unsigned char *add, size_t add_len, + const unsigned char *input, unsigned char *output, + unsigned char *tag, size_t tag_len ); + +/** + * \brief This function performs a CCM authenticated decryption of a + * buffer. + * + * \param ctx The CCM context to use for decryption. This must be + * initialized and bound to a key. + * \param length The length of the input data in Bytes. + * \param iv The initialization vector (nonce). This must be a readable + * buffer of at least \p iv_len Bytes. + * \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12, + * or 13. The length L of the message length field is + * 15 - \p iv_len. + * \param add The additional data field. This must be a readable buffer + * of at least that \p add_len Bytes.. + * \param add_len The length of additional data in Bytes. + * This must be less than 2^16 - 2^8. + * \param input The buffer holding the input data. If \p length is greater + * than zero, \p input must be a readable buffer of at least + * that length. + * \param output The buffer holding the output data. If \p length is greater + * than zero, \p output must be a writable buffer of at least + * that length. + * \param tag The buffer holding the authentication field. This must be a + * readable buffer of at least \p tag_len Bytes. + * \param tag_len The length of the authentication field to generate in Bytes: + * 4, 6, 8, 10, 12, 14 or 16. + * + * \return \c 0 on success. This indicates that the message is authentic. + * \return #MBEDTLS_ERR_CCM_AUTH_FAILED if the tag does not match. + * \return A cipher-specific error code on calculation failure. + */ +int mbedtls_ccm_auth_decrypt( mbedtls_ccm_context *ctx, size_t length, + const unsigned char *iv, size_t iv_len, + const unsigned char *add, size_t add_len, + const unsigned char *input, unsigned char *output, + const unsigned char *tag, size_t tag_len ); + +/** + * \brief This function performs a CCM* authenticated decryption of a + * buffer. + * + * \note When using this function in a variable tag length context, + * the tag length has to be decoded from \p iv and passed to + * this function as \p tag_len. (\p tag needs to be adjusted + * accordingly.) + * + * \param ctx The CCM context to use for decryption. This must be + * initialized and bound to a key. + * \param length The length of the input data in Bytes. + * \param iv The initialization vector (nonce). This must be a readable + * buffer of at least \p iv_len Bytes. + * \param iv_len The length of the nonce in Bytes: 7, 8, 9, 10, 11, 12, + * or 13. The length L of the message length field is + * 15 - \p iv_len. + * \param add The additional data field. This must be a readable buffer of + * at least that \p add_len Bytes. + * \param add_len The length of additional data in Bytes. + * This must be less than 2^16 - 2^8. + * \param input The buffer holding the input data. If \p length is greater + * than zero, \p input must be a readable buffer of at least + * that length. + * \param output The buffer holding the output data. If \p length is greater + * than zero, \p output must be a writable buffer of at least + * that length. + * \param tag The buffer holding the authentication field. This must be a + * readable buffer of at least \p tag_len Bytes. + * \param tag_len The length of the authentication field in Bytes. + * 0, 4, 6, 8, 10, 12, 14 or 16. + * + * \warning Passing \c 0 as \p tag_len means that the message is nos + * longer authenticated. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CCM_AUTH_FAILED if the tag does not match. + * \return A cipher-specific error code on calculation failure. + */ +int mbedtls_ccm_star_auth_decrypt( mbedtls_ccm_context *ctx, size_t length, + const unsigned char *iv, size_t iv_len, + const unsigned char *add, size_t add_len, + const unsigned char *input, unsigned char *output, + const unsigned char *tag, size_t tag_len ); + +#if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_AES_C) +/** + * \brief The CCM checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_ccm_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST && MBEDTLS_AES_C */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_CCM_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/certs.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/certs.h new file mode 100644 index 000000000..179ebbbad --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/certs.h @@ -0,0 +1,252 @@ +/** + * \file certs.h + * + * \brief Sample certificates and DHM parameters for testing + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_CERTS_H +#define MBEDTLS_CERTS_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* List of all PEM-encoded CA certificates, terminated by NULL; + * PEM encoded if MBEDTLS_PEM_PARSE_C is enabled, DER encoded + * otherwise. */ +extern const char * mbedtls_test_cas[]; +extern const size_t mbedtls_test_cas_len[]; + +/* List of all DER-encoded CA certificates, terminated by NULL */ +extern const unsigned char * mbedtls_test_cas_der[]; +extern const size_t mbedtls_test_cas_der_len[]; + +#if defined(MBEDTLS_PEM_PARSE_C) +/* Concatenation of all CA certificates in PEM format if available */ +extern const char mbedtls_test_cas_pem[]; +extern const size_t mbedtls_test_cas_pem_len; +#endif /* MBEDTLS_PEM_PARSE_C */ + +/* + * CA test certificates + */ + +extern const char mbedtls_test_ca_crt_ec_pem[]; +extern const char mbedtls_test_ca_key_ec_pem[]; +extern const char mbedtls_test_ca_pwd_ec_pem[]; +extern const char mbedtls_test_ca_key_rsa_pem[]; +extern const char mbedtls_test_ca_pwd_rsa_pem[]; +extern const char mbedtls_test_ca_crt_rsa_sha1_pem[]; +extern const char mbedtls_test_ca_crt_rsa_sha256_pem[]; + +extern const unsigned char mbedtls_test_ca_crt_ec_der[]; +extern const unsigned char mbedtls_test_ca_key_ec_der[]; +extern const unsigned char mbedtls_test_ca_key_rsa_der[]; +extern const unsigned char mbedtls_test_ca_crt_rsa_sha1_der[]; +extern const unsigned char mbedtls_test_ca_crt_rsa_sha256_der[]; + +extern const size_t mbedtls_test_ca_crt_ec_pem_len; +extern const size_t mbedtls_test_ca_key_ec_pem_len; +extern const size_t mbedtls_test_ca_pwd_ec_pem_len; +extern const size_t mbedtls_test_ca_key_rsa_pem_len; +extern const size_t mbedtls_test_ca_pwd_rsa_pem_len; +extern const size_t mbedtls_test_ca_crt_rsa_sha1_pem_len; +extern const size_t mbedtls_test_ca_crt_rsa_sha256_pem_len; + +extern const size_t mbedtls_test_ca_crt_ec_der_len; +extern const size_t mbedtls_test_ca_key_ec_der_len; +extern const size_t mbedtls_test_ca_pwd_ec_der_len; +extern const size_t mbedtls_test_ca_key_rsa_der_len; +extern const size_t mbedtls_test_ca_pwd_rsa_der_len; +extern const size_t mbedtls_test_ca_crt_rsa_sha1_der_len; +extern const size_t mbedtls_test_ca_crt_rsa_sha256_der_len; + +/* Config-dependent dispatch between PEM and DER encoding + * (PEM if enabled, otherwise DER) */ + +extern const char mbedtls_test_ca_crt_ec[]; +extern const char mbedtls_test_ca_key_ec[]; +extern const char mbedtls_test_ca_pwd_ec[]; +extern const char mbedtls_test_ca_key_rsa[]; +extern const char mbedtls_test_ca_pwd_rsa[]; +extern const char mbedtls_test_ca_crt_rsa_sha1[]; +extern const char mbedtls_test_ca_crt_rsa_sha256[]; + +extern const size_t mbedtls_test_ca_crt_ec_len; +extern const size_t mbedtls_test_ca_key_ec_len; +extern const size_t mbedtls_test_ca_pwd_ec_len; +extern const size_t mbedtls_test_ca_key_rsa_len; +extern const size_t mbedtls_test_ca_pwd_rsa_len; +extern const size_t mbedtls_test_ca_crt_rsa_sha1_len; +extern const size_t mbedtls_test_ca_crt_rsa_sha256_len; + +/* Config-dependent dispatch between SHA-1 and SHA-256 + * (SHA-256 if enabled, otherwise SHA-1) */ + +extern const char mbedtls_test_ca_crt_rsa[]; +extern const size_t mbedtls_test_ca_crt_rsa_len; + +/* Config-dependent dispatch between EC and RSA + * (RSA if enabled, otherwise EC) */ + +extern const char * mbedtls_test_ca_crt; +extern const char * mbedtls_test_ca_key; +extern const char * mbedtls_test_ca_pwd; +extern const size_t mbedtls_test_ca_crt_len; +extern const size_t mbedtls_test_ca_key_len; +extern const size_t mbedtls_test_ca_pwd_len; + +/* + * Server test certificates + */ + +extern const char mbedtls_test_srv_crt_ec_pem[]; +extern const char mbedtls_test_srv_key_ec_pem[]; +extern const char mbedtls_test_srv_pwd_ec_pem[]; +extern const char mbedtls_test_srv_key_rsa_pem[]; +extern const char mbedtls_test_srv_pwd_rsa_pem[]; +extern const char mbedtls_test_srv_crt_rsa_sha1_pem[]; +extern const char mbedtls_test_srv_crt_rsa_sha256_pem[]; + +extern const unsigned char mbedtls_test_srv_crt_ec_der[]; +extern const unsigned char mbedtls_test_srv_key_ec_der[]; +extern const unsigned char mbedtls_test_srv_key_rsa_der[]; +extern const unsigned char mbedtls_test_srv_crt_rsa_sha1_der[]; +extern const unsigned char mbedtls_test_srv_crt_rsa_sha256_der[]; + +extern const size_t mbedtls_test_srv_crt_ec_pem_len; +extern const size_t mbedtls_test_srv_key_ec_pem_len; +extern const size_t mbedtls_test_srv_pwd_ec_pem_len; +extern const size_t mbedtls_test_srv_key_rsa_pem_len; +extern const size_t mbedtls_test_srv_pwd_rsa_pem_len; +extern const size_t mbedtls_test_srv_crt_rsa_sha1_pem_len; +extern const size_t mbedtls_test_srv_crt_rsa_sha256_pem_len; + +extern const size_t mbedtls_test_srv_crt_ec_der_len; +extern const size_t mbedtls_test_srv_key_ec_der_len; +extern const size_t mbedtls_test_srv_pwd_ec_der_len; +extern const size_t mbedtls_test_srv_key_rsa_der_len; +extern const size_t mbedtls_test_srv_pwd_rsa_der_len; +extern const size_t mbedtls_test_srv_crt_rsa_sha1_der_len; +extern const size_t mbedtls_test_srv_crt_rsa_sha256_der_len; + +/* Config-dependent dispatch between PEM and DER encoding + * (PEM if enabled, otherwise DER) */ + +extern const char mbedtls_test_srv_crt_ec[]; +extern const char mbedtls_test_srv_key_ec[]; +extern const char mbedtls_test_srv_pwd_ec[]; +extern const char mbedtls_test_srv_key_rsa[]; +extern const char mbedtls_test_srv_pwd_rsa[]; +extern const char mbedtls_test_srv_crt_rsa_sha1[]; +extern const char mbedtls_test_srv_crt_rsa_sha256[]; + +extern const size_t mbedtls_test_srv_crt_ec_len; +extern const size_t mbedtls_test_srv_key_ec_len; +extern const size_t mbedtls_test_srv_pwd_ec_len; +extern const size_t mbedtls_test_srv_key_rsa_len; +extern const size_t mbedtls_test_srv_pwd_rsa_len; +extern const size_t mbedtls_test_srv_crt_rsa_sha1_len; +extern const size_t mbedtls_test_srv_crt_rsa_sha256_len; + +/* Config-dependent dispatch between SHA-1 and SHA-256 + * (SHA-256 if enabled, otherwise SHA-1) */ + +extern const char mbedtls_test_srv_crt_rsa[]; +extern const size_t mbedtls_test_srv_crt_rsa_len; + +/* Config-dependent dispatch between EC and RSA + * (RSA if enabled, otherwise EC) */ + +extern const char * mbedtls_test_srv_crt; +extern const char * mbedtls_test_srv_key; +extern const char * mbedtls_test_srv_pwd; +extern const size_t mbedtls_test_srv_crt_len; +extern const size_t mbedtls_test_srv_key_len; +extern const size_t mbedtls_test_srv_pwd_len; + +/* + * Client test certificates + */ + +extern const char mbedtls_test_cli_crt_ec_pem[]; +extern const char mbedtls_test_cli_key_ec_pem[]; +extern const char mbedtls_test_cli_pwd_ec_pem[]; +extern const char mbedtls_test_cli_key_rsa_pem[]; +extern const char mbedtls_test_cli_pwd_rsa_pem[]; +extern const char mbedtls_test_cli_crt_rsa_pem[]; + +extern const unsigned char mbedtls_test_cli_crt_ec_der[]; +extern const unsigned char mbedtls_test_cli_key_ec_der[]; +extern const unsigned char mbedtls_test_cli_key_rsa_der[]; +extern const unsigned char mbedtls_test_cli_crt_rsa_der[]; + +extern const size_t mbedtls_test_cli_crt_ec_pem_len; +extern const size_t mbedtls_test_cli_key_ec_pem_len; +extern const size_t mbedtls_test_cli_pwd_ec_pem_len; +extern const size_t mbedtls_test_cli_key_rsa_pem_len; +extern const size_t mbedtls_test_cli_pwd_rsa_pem_len; +extern const size_t mbedtls_test_cli_crt_rsa_pem_len; + +extern const size_t mbedtls_test_cli_crt_ec_der_len; +extern const size_t mbedtls_test_cli_key_ec_der_len; +extern const size_t mbedtls_test_cli_key_rsa_der_len; +extern const size_t mbedtls_test_cli_crt_rsa_der_len; + +/* Config-dependent dispatch between PEM and DER encoding + * (PEM if enabled, otherwise DER) */ + +extern const char mbedtls_test_cli_crt_ec[]; +extern const char mbedtls_test_cli_key_ec[]; +extern const char mbedtls_test_cli_pwd_ec[]; +extern const char mbedtls_test_cli_key_rsa[]; +extern const char mbedtls_test_cli_pwd_rsa[]; +extern const char mbedtls_test_cli_crt_rsa[]; + +extern const size_t mbedtls_test_cli_crt_ec_len; +extern const size_t mbedtls_test_cli_key_ec_len; +extern const size_t mbedtls_test_cli_pwd_ec_len; +extern const size_t mbedtls_test_cli_key_rsa_len; +extern const size_t mbedtls_test_cli_pwd_rsa_len; +extern const size_t mbedtls_test_cli_crt_rsa_len; + +/* Config-dependent dispatch between EC and RSA + * (RSA if enabled, otherwise EC) */ + +extern const char * mbedtls_test_cli_crt; +extern const char * mbedtls_test_cli_key; +extern const char * mbedtls_test_cli_pwd; +extern const size_t mbedtls_test_cli_crt_len; +extern const size_t mbedtls_test_cli_key_len; +extern const size_t mbedtls_test_cli_pwd_len; + +#ifdef __cplusplus +} +#endif + +#endif /* certs.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/chacha20.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/chacha20.h new file mode 100644 index 000000000..2ae5e6e5f --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/chacha20.h @@ -0,0 +1,226 @@ +/** + * \file chacha20.h + * + * \brief This file contains ChaCha20 definitions and functions. + * + * ChaCha20 is a stream cipher that can encrypt and decrypt + * information. ChaCha was created by Daniel Bernstein as a variant of + * its Salsa cipher https://cr.yp.to/chacha/chacha-20080128.pdf + * ChaCha20 is the variant with 20 rounds, that was also standardized + * in RFC 7539. + * + * \author Daniel King <damaki.gh@gmail.com> + */ + +/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved. + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_CHACHA20_H +#define MBEDTLS_CHACHA20_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stdint.h> +#include <stddef.h> + +#define MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA -0x0051 /**< Invalid input parameter(s). */ + +/* MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE is deprecated and should not be + * used. */ +#define MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE -0x0053 /**< Feature not available. For example, s part of the API is not implemented. */ + +/* MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED is deprecated and should not be used. + */ +#define MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED -0x0055 /**< Chacha20 hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_CHACHA20_ALT) + +typedef struct mbedtls_chacha20_context +{ + uint32_t state[16]; /*! The state (before round operations). */ + uint8_t keystream8[64]; /*! Leftover keystream bytes. */ + size_t keystream_bytes_used; /*! Number of keystream bytes already used. */ +} +mbedtls_chacha20_context; + +#else /* MBEDTLS_CHACHA20_ALT */ +#include "chacha20_alt.h" +#endif /* MBEDTLS_CHACHA20_ALT */ + +/** + * \brief This function initializes the specified ChaCha20 context. + * + * It must be the first API called before using + * the context. + * + * It is usually followed by calls to + * \c mbedtls_chacha20_setkey() and + * \c mbedtls_chacha20_starts(), then one or more calls to + * to \c mbedtls_chacha20_update(), and finally to + * \c mbedtls_chacha20_free(). + * + * \param ctx The ChaCha20 context to initialize. + * This must not be \c NULL. + */ +void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx ); + +/** + * \brief This function releases and clears the specified + * ChaCha20 context. + * + * \param ctx The ChaCha20 context to clear. This may be \c NULL, + * in which case this function is a no-op. If it is not + * \c NULL, it must point to an initialized context. + * + */ +void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx ); + +/** + * \brief This function sets the encryption/decryption key. + * + * \note After using this function, you must also call + * \c mbedtls_chacha20_starts() to set a nonce before you + * start encrypting/decrypting data with + * \c mbedtls_chacha_update(). + * + * \param ctx The ChaCha20 context to which the key should be bound. + * It must be initialized. + * \param key The encryption/decryption key. This must be \c 32 Bytes + * in length. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL. + */ +int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx, + const unsigned char key[32] ); + +/** + * \brief This function sets the nonce and initial counter value. + * + * \note A ChaCha20 context can be re-used with the same key by + * calling this function to change the nonce. + * + * \warning You must never use the same nonce twice with the same key. + * This would void any confidentiality guarantees for the + * messages encrypted with the same nonce and key. + * + * \param ctx The ChaCha20 context to which the nonce should be bound. + * It must be initialized and bound to a key. + * \param nonce The nonce. This must be \c 12 Bytes in size. + * \param counter The initial counter value. This is usually \c 0. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is + * NULL. + */ +int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx, + const unsigned char nonce[12], + uint32_t counter ); + +/** + * \brief This function encrypts or decrypts data. + * + * Since ChaCha20 is a stream cipher, the same operation is + * used for encrypting and decrypting data. + * + * \note The \p input and \p output pointers must either be equal or + * point to non-overlapping buffers. + * + * \note \c mbedtls_chacha20_setkey() and + * \c mbedtls_chacha20_starts() must be called at least once + * to setup the context before this function can be called. + * + * \note This function can be called multiple times in a row in + * order to encrypt of decrypt data piecewise with the same + * key and nonce. + * + * \param ctx The ChaCha20 context to use for encryption or decryption. + * It must be initialized and bound to a key and nonce. + * \param size The length of the input data in Bytes. + * \param input The buffer holding the input data. + * This pointer can be \c NULL if `size == 0`. + * \param output The buffer holding the output data. + * This must be able to hold \p size Bytes. + * This pointer can be \c NULL if `size == 0`. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx, + size_t size, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function encrypts or decrypts data with ChaCha20 and + * the given key and nonce. + * + * Since ChaCha20 is a stream cipher, the same operation is + * used for encrypting and decrypting data. + * + * \warning You must never use the same (key, nonce) pair more than + * once. This would void any confidentiality guarantees for + * the messages encrypted with the same nonce and key. + * + * \note The \p input and \p output pointers must either be equal or + * point to non-overlapping buffers. + * + * \param key The encryption/decryption key. + * This must be \c 32 Bytes in length. + * \param nonce The nonce. This must be \c 12 Bytes in size. + * \param counter The initial counter value. This is usually \c 0. + * \param size The length of the input data in Bytes. + * \param input The buffer holding the input data. + * This pointer can be \c NULL if `size == 0`. + * \param output The buffer holding the output data. + * This must be able to hold \p size Bytes. + * This pointer can be \c NULL if `size == 0`. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_chacha20_crypt( const unsigned char key[32], + const unsigned char nonce[12], + uint32_t counter, + size_t size, + const unsigned char* input, + unsigned char* output ); + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief The ChaCha20 checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_chacha20_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_CHACHA20_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/chachapoly.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/chachapoly.h new file mode 100644 index 000000000..49e615d27 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/chachapoly.h @@ -0,0 +1,358 @@ +/** + * \file chachapoly.h + * + * \brief This file contains the AEAD-ChaCha20-Poly1305 definitions and + * functions. + * + * ChaCha20-Poly1305 is an algorithm for Authenticated Encryption + * with Associated Data (AEAD) that can be used to encrypt and + * authenticate data. It is based on ChaCha20 and Poly1305 by Daniel + * Bernstein and was standardized in RFC 7539. + * + * \author Daniel King <damaki.gh@gmail.com> + */ + +/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved. + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_CHACHAPOLY_H +#define MBEDTLS_CHACHAPOLY_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +/* for shared error codes */ +#include "poly1305.h" + +#define MBEDTLS_ERR_CHACHAPOLY_BAD_STATE -0x0054 /**< The requested operation is not permitted in the current state. */ +#define MBEDTLS_ERR_CHACHAPOLY_AUTH_FAILED -0x0056 /**< Authenticated decryption failed: data was not authentic. */ + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum +{ + MBEDTLS_CHACHAPOLY_ENCRYPT, /**< The mode value for performing encryption. */ + MBEDTLS_CHACHAPOLY_DECRYPT /**< The mode value for performing decryption. */ +} +mbedtls_chachapoly_mode_t; + +#if !defined(MBEDTLS_CHACHAPOLY_ALT) + +#include "chacha20.h" + +typedef struct mbedtls_chachapoly_context +{ + mbedtls_chacha20_context chacha20_ctx; /**< The ChaCha20 context. */ + mbedtls_poly1305_context poly1305_ctx; /**< The Poly1305 context. */ + uint64_t aad_len; /**< The length (bytes) of the Additional Authenticated Data. */ + uint64_t ciphertext_len; /**< The length (bytes) of the ciphertext. */ + int state; /**< The current state of the context. */ + mbedtls_chachapoly_mode_t mode; /**< Cipher mode (encrypt or decrypt). */ +} +mbedtls_chachapoly_context; + +#else /* !MBEDTLS_CHACHAPOLY_ALT */ +#include "chachapoly_alt.h" +#endif /* !MBEDTLS_CHACHAPOLY_ALT */ + +/** + * \brief This function initializes the specified ChaCha20-Poly1305 context. + * + * It must be the first API called before using + * the context. It must be followed by a call to + * \c mbedtls_chachapoly_setkey() before any operation can be + * done, and to \c mbedtls_chachapoly_free() once all + * operations with that context have been finished. + * + * In order to encrypt or decrypt full messages at once, for + * each message you should make a single call to + * \c mbedtls_chachapoly_crypt_and_tag() or + * \c mbedtls_chachapoly_auth_decrypt(). + * + * In order to encrypt messages piecewise, for each + * message you should make a call to + * \c mbedtls_chachapoly_starts(), then 0 or more calls to + * \c mbedtls_chachapoly_update_aad(), then 0 or more calls to + * \c mbedtls_chachapoly_update(), then one call to + * \c mbedtls_chachapoly_finish(). + * + * \warning Decryption with the piecewise API is discouraged! Always + * use \c mbedtls_chachapoly_auth_decrypt() when possible! + * + * If however this is not possible because the data is too + * large to fit in memory, you need to: + * + * - call \c mbedtls_chachapoly_starts() and (if needed) + * \c mbedtls_chachapoly_update_aad() as above, + * - call \c mbedtls_chachapoly_update() multiple times and + * ensure its output (the plaintext) is NOT used in any other + * way than placing it in temporary storage at this point, + * - call \c mbedtls_chachapoly_finish() to compute the + * authentication tag and compared it in constant time to the + * tag received with the ciphertext. + * + * If the tags are not equal, you must immediately discard + * all previous outputs of \c mbedtls_chachapoly_update(), + * otherwise you can now safely use the plaintext. + * + * \param ctx The ChachaPoly context to initialize. Must not be \c NULL. + */ +void mbedtls_chachapoly_init( mbedtls_chachapoly_context *ctx ); + +/** + * \brief This function releases and clears the specified + * ChaCha20-Poly1305 context. + * + * \param ctx The ChachaPoly context to clear. This may be \c NULL, in which + * case this function is a no-op. + */ +void mbedtls_chachapoly_free( mbedtls_chachapoly_context *ctx ); + +/** + * \brief This function sets the ChaCha20-Poly1305 + * symmetric encryption key. + * + * \param ctx The ChaCha20-Poly1305 context to which the key should be + * bound. This must be initialized. + * \param key The \c 256 Bit (\c 32 Bytes) key. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_chachapoly_setkey( mbedtls_chachapoly_context *ctx, + const unsigned char key[32] ); + +/** + * \brief This function starts a ChaCha20-Poly1305 encryption or + * decryption operation. + * + * \warning You must never use the same nonce twice with the same key. + * This would void any confidentiality and authenticity + * guarantees for the messages encrypted with the same nonce + * and key. + * + * \note If the context is being used for AAD only (no data to + * encrypt or decrypt) then \p mode can be set to any value. + * + * \warning Decryption with the piecewise API is discouraged, see the + * warning on \c mbedtls_chachapoly_init(). + * + * \param ctx The ChaCha20-Poly1305 context. This must be initialized + * and bound to a key. + * \param nonce The nonce/IV to use for the message. + * This must be a redable buffer of length \c 12 Bytes. + * \param mode The operation to perform: #MBEDTLS_CHACHAPOLY_ENCRYPT or + * #MBEDTLS_CHACHAPOLY_DECRYPT (discouraged, see warning). + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_chachapoly_starts( mbedtls_chachapoly_context *ctx, + const unsigned char nonce[12], + mbedtls_chachapoly_mode_t mode ); + +/** + * \brief This function feeds additional data to be authenticated + * into an ongoing ChaCha20-Poly1305 operation. + * + * The Additional Authenticated Data (AAD), also called + * Associated Data (AD) is only authenticated but not + * encrypted nor included in the encrypted output. It is + * usually transmitted separately from the ciphertext or + * computed locally by each party. + * + * \note This function is called before data is encrypted/decrypted. + * I.e. call this function to process the AAD before calling + * \c mbedtls_chachapoly_update(). + * + * You may call this function multiple times to process + * an arbitrary amount of AAD. It is permitted to call + * this function 0 times, if no AAD is used. + * + * This function cannot be called any more if data has + * been processed by \c mbedtls_chachapoly_update(), + * or if the context has been finished. + * + * \warning Decryption with the piecewise API is discouraged, see the + * warning on \c mbedtls_chachapoly_init(). + * + * \param ctx The ChaCha20-Poly1305 context. This must be initialized + * and bound to a key. + * \param aad_len The length in Bytes of the AAD. The length has no + * restrictions. + * \param aad Buffer containing the AAD. + * This pointer can be \c NULL if `aad_len == 0`. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA + * if \p ctx or \p aad are NULL. + * \return #MBEDTLS_ERR_CHACHAPOLY_BAD_STATE + * if the operations has not been started or has been + * finished, or if the AAD has been finished. + */ +int mbedtls_chachapoly_update_aad( mbedtls_chachapoly_context *ctx, + const unsigned char *aad, + size_t aad_len ); + +/** + * \brief Thus function feeds data to be encrypted or decrypted + * into an on-going ChaCha20-Poly1305 + * operation. + * + * The direction (encryption or decryption) depends on the + * mode that was given when calling + * \c mbedtls_chachapoly_starts(). + * + * You may call this function multiple times to process + * an arbitrary amount of data. It is permitted to call + * this function 0 times, if no data is to be encrypted + * or decrypted. + * + * \warning Decryption with the piecewise API is discouraged, see the + * warning on \c mbedtls_chachapoly_init(). + * + * \param ctx The ChaCha20-Poly1305 context to use. This must be initialized. + * \param len The length (in bytes) of the data to encrypt or decrypt. + * \param input The buffer containing the data to encrypt or decrypt. + * This pointer can be \c NULL if `len == 0`. + * \param output The buffer to where the encrypted or decrypted data is + * written. This must be able to hold \p len bytes. + * This pointer can be \c NULL if `len == 0`. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CHACHAPOLY_BAD_STATE + * if the operation has not been started or has been + * finished. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_chachapoly_update( mbedtls_chachapoly_context *ctx, + size_t len, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function finished the ChaCha20-Poly1305 operation and + * generates the MAC (authentication tag). + * + * \param ctx The ChaCha20-Poly1305 context to use. This must be initialized. + * \param mac The buffer to where the 128-bit (16 bytes) MAC is written. + * + * \warning Decryption with the piecewise API is discouraged, see the + * warning on \c mbedtls_chachapoly_init(). + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CHACHAPOLY_BAD_STATE + * if the operation has not been started or has been + * finished. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_chachapoly_finish( mbedtls_chachapoly_context *ctx, + unsigned char mac[16] ); + +/** + * \brief This function performs a complete ChaCha20-Poly1305 + * authenticated encryption with the previously-set key. + * + * \note Before using this function, you must set the key with + * \c mbedtls_chachapoly_setkey(). + * + * \warning You must never use the same nonce twice with the same key. + * This would void any confidentiality and authenticity + * guarantees for the messages encrypted with the same nonce + * and key. + * + * \param ctx The ChaCha20-Poly1305 context to use (holds the key). + * This must be initialized. + * \param length The length (in bytes) of the data to encrypt or decrypt. + * \param nonce The 96-bit (12 bytes) nonce/IV to use. + * \param aad The buffer containing the additional authenticated + * data (AAD). This pointer can be \c NULL if `aad_len == 0`. + * \param aad_len The length (in bytes) of the AAD data to process. + * \param input The buffer containing the data to encrypt or decrypt. + * This pointer can be \c NULL if `ilen == 0`. + * \param output The buffer to where the encrypted or decrypted data + * is written. This pointer can be \c NULL if `ilen == 0`. + * \param tag The buffer to where the computed 128-bit (16 bytes) MAC + * is written. This must not be \c NULL. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_chachapoly_encrypt_and_tag( mbedtls_chachapoly_context *ctx, + size_t length, + const unsigned char nonce[12], + const unsigned char *aad, + size_t aad_len, + const unsigned char *input, + unsigned char *output, + unsigned char tag[16] ); + +/** + * \brief This function performs a complete ChaCha20-Poly1305 + * authenticated decryption with the previously-set key. + * + * \note Before using this function, you must set the key with + * \c mbedtls_chachapoly_setkey(). + * + * \param ctx The ChaCha20-Poly1305 context to use (holds the key). + * \param length The length (in Bytes) of the data to decrypt. + * \param nonce The \c 96 Bit (\c 12 bytes) nonce/IV to use. + * \param aad The buffer containing the additional authenticated data (AAD). + * This pointer can be \c NULL if `aad_len == 0`. + * \param aad_len The length (in bytes) of the AAD data to process. + * \param tag The buffer holding the authentication tag. + * This must be a readable buffer of length \c 16 Bytes. + * \param input The buffer containing the data to decrypt. + * This pointer can be \c NULL if `ilen == 0`. + * \param output The buffer to where the decrypted data is written. + * This pointer can be \c NULL if `ilen == 0`. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CHACHAPOLY_AUTH_FAILED + * if the data was not authentic. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_chachapoly_auth_decrypt( mbedtls_chachapoly_context *ctx, + size_t length, + const unsigned char nonce[12], + const unsigned char *aad, + size_t aad_len, + const unsigned char tag[16], + const unsigned char *input, + unsigned char *output ); + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief The ChaCha20-Poly1305 checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_chachapoly_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_CHACHAPOLY_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/check_config.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/check_config.h new file mode 100644 index 000000000..b86e5807e --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/check_config.h @@ -0,0 +1,698 @@ +/** + * \file check_config.h + * + * \brief Consistency checks for configuration options + */ +/* + * Copyright (C) 2006-2018, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +/* + * It is recommended to include this file from your config.h + * in order to catch dependency issues early. + */ + +#ifndef MBEDTLS_CHECK_CONFIG_H +#define MBEDTLS_CHECK_CONFIG_H + +/* + * We assume CHAR_BIT is 8 in many places. In practice, this is true on our + * target platforms, so not an issue, but let's just be extra sure. + */ +#include <limits.h> +#if CHAR_BIT != 8 +#error "mbed TLS requires a platform with 8-bit chars" +#endif + +#if defined(_WIN32) +#if !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_C is required on Windows" +#endif + +/* Fix the config here. Not convenient to put an #ifdef _WIN32 in config.h as + * it would confuse config.pl. */ +#if !defined(MBEDTLS_PLATFORM_SNPRINTF_ALT) && \ + !defined(MBEDTLS_PLATFORM_SNPRINTF_MACRO) +#define MBEDTLS_PLATFORM_SNPRINTF_ALT +#endif +#endif /* _WIN32 */ + +#if defined(TARGET_LIKE_MBED) && \ + ( defined(MBEDTLS_NET_C) || defined(MBEDTLS_TIMING_C) ) +#error "The NET and TIMING modules are not available for mbed OS - please use the network and timing functions provided by mbed OS" +#endif + +#if defined(MBEDTLS_DEPRECATED_WARNING) && \ + !defined(__GNUC__) && !defined(__clang__) +#error "MBEDTLS_DEPRECATED_WARNING only works with GCC and Clang" +#endif + +#if defined(MBEDTLS_HAVE_TIME_DATE) && !defined(MBEDTLS_HAVE_TIME) +#error "MBEDTLS_HAVE_TIME_DATE without MBEDTLS_HAVE_TIME does not make sense" +#endif + +#if defined(MBEDTLS_AESNI_C) && !defined(MBEDTLS_HAVE_ASM) +#error "MBEDTLS_AESNI_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_CTR_DRBG_C) && !defined(MBEDTLS_AES_C) +#error "MBEDTLS_CTR_DRBG_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_DHM_C) && !defined(MBEDTLS_BIGNUM_C) +#error "MBEDTLS_DHM_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT) && !defined(MBEDTLS_SSL_TRUNCATED_HMAC) +#error "MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_CMAC_C) && \ + !defined(MBEDTLS_AES_C) && !defined(MBEDTLS_DES_C) +#error "MBEDTLS_CMAC_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_NIST_KW_C) && \ + ( !defined(MBEDTLS_AES_C) || !defined(MBEDTLS_CIPHER_C) ) +#error "MBEDTLS_NIST_KW_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECDH_C) && !defined(MBEDTLS_ECP_C) +#error "MBEDTLS_ECDH_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECDSA_C) && \ + ( !defined(MBEDTLS_ECP_C) || \ + !defined(MBEDTLS_ASN1_PARSE_C) || \ + !defined(MBEDTLS_ASN1_WRITE_C) ) +#error "MBEDTLS_ECDSA_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECJPAKE_C) && \ + ( !defined(MBEDTLS_ECP_C) || !defined(MBEDTLS_MD_C) ) +#error "MBEDTLS_ECJPAKE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_RESTARTABLE) && \ + ( defined(MBEDTLS_ECDH_COMPUTE_SHARED_ALT) || \ + defined(MBEDTLS_ECDH_GEN_PUBLIC_ALT) || \ + defined(MBEDTLS_ECDSA_SIGN_ALT) || \ + defined(MBEDTLS_ECDSA_VERIFY_ALT) || \ + defined(MBEDTLS_ECDSA_GENKEY_ALT) || \ + defined(MBEDTLS_ECP_INTERNAL_ALT) || \ + defined(MBEDTLS_ECP_ALT) ) +#error "MBEDTLS_ECP_RESTARTABLE defined, but it cannot coexist with an alternative ECP implementation" +#endif + +#if defined(MBEDTLS_ECDSA_DETERMINISTIC) && !defined(MBEDTLS_HMAC_DRBG_C) +#error "MBEDTLS_ECDSA_DETERMINISTIC defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_C) && ( !defined(MBEDTLS_BIGNUM_C) || ( \ + !defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_BP256R1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_BP384R1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_BP512R1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_SECP192K1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_SECP224K1_ENABLED) && \ + !defined(MBEDTLS_ECP_DP_SECP256K1_ENABLED) ) ) +#error "MBEDTLS_ECP_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PK_PARSE_C) && !defined(MBEDTLS_ASN1_PARSE_C) +#error "MBEDTLS_PK_PARSE_C defined, but not all prerequesites" +#endif + +#if defined(MBEDTLS_ENTROPY_C) && (!defined(MBEDTLS_SHA512_C) && \ + !defined(MBEDTLS_SHA256_C)) +#error "MBEDTLS_ENTROPY_C defined, but not all prerequisites" +#endif +#if defined(MBEDTLS_ENTROPY_C) && defined(MBEDTLS_SHA512_C) && \ + defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN) && (MBEDTLS_CTR_DRBG_ENTROPY_LEN > 64) +#error "MBEDTLS_CTR_DRBG_ENTROPY_LEN value too high" +#endif +#if defined(MBEDTLS_ENTROPY_C) && \ + ( !defined(MBEDTLS_SHA512_C) || defined(MBEDTLS_ENTROPY_FORCE_SHA256) ) \ + && defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN) && (MBEDTLS_CTR_DRBG_ENTROPY_LEN > 32) +#error "MBEDTLS_CTR_DRBG_ENTROPY_LEN value too high" +#endif +#if defined(MBEDTLS_ENTROPY_C) && \ + defined(MBEDTLS_ENTROPY_FORCE_SHA256) && !defined(MBEDTLS_SHA256_C) +#error "MBEDTLS_ENTROPY_FORCE_SHA256 defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_TEST_NULL_ENTROPY) && \ + ( !defined(MBEDTLS_ENTROPY_C) || !defined(MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES) ) +#error "MBEDTLS_TEST_NULL_ENTROPY defined, but not all prerequisites" +#endif +#if defined(MBEDTLS_TEST_NULL_ENTROPY) && \ + ( defined(MBEDTLS_ENTROPY_NV_SEED) || defined(MBEDTLS_ENTROPY_HARDWARE_ALT) || \ + defined(MBEDTLS_HAVEGE_C) ) +#error "MBEDTLS_TEST_NULL_ENTROPY defined, but entropy sources too" +#endif + +#if defined(MBEDTLS_GCM_C) && ( \ + !defined(MBEDTLS_AES_C) && !defined(MBEDTLS_CAMELLIA_C) ) +#error "MBEDTLS_GCM_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_RANDOMIZE_JAC_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT) +#error "MBEDTLS_ECP_RANDOMIZE_JAC_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_ADD_MIXED_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT) +#error "MBEDTLS_ECP_ADD_MIXED_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_DOUBLE_JAC_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT) +#error "MBEDTLS_ECP_DOUBLE_JAC_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT) +#error "MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_NORMALIZE_JAC_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT) +#error "MBEDTLS_ECP_NORMALIZE_JAC_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT) +#error "MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_RANDOMIZE_MXZ_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT) +#error "MBEDTLS_ECP_RANDOMIZE_MXZ_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ECP_NORMALIZE_MXZ_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT) +#error "MBEDTLS_ECP_NORMALIZE_MXZ_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_HAVEGE_C) && !defined(MBEDTLS_TIMING_C) +#error "MBEDTLS_HAVEGE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_HKDF_C) && !defined(MBEDTLS_MD_C) +#error "MBEDTLS_HKDF_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_HMAC_DRBG_C) && !defined(MBEDTLS_MD_C) +#error "MBEDTLS_HMAC_DRBG_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) && \ + ( !defined(MBEDTLS_ECDH_C) || !defined(MBEDTLS_X509_CRT_PARSE_C) ) +#error "MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) && \ + ( !defined(MBEDTLS_ECDH_C) || !defined(MBEDTLS_X509_CRT_PARSE_C) ) +#error "MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) && !defined(MBEDTLS_DHM_C) +#error "MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) && \ + !defined(MBEDTLS_ECDH_C) +#error "MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) && \ + ( !defined(MBEDTLS_DHM_C) || !defined(MBEDTLS_RSA_C) || \ + !defined(MBEDTLS_X509_CRT_PARSE_C) || !defined(MBEDTLS_PKCS1_V15) ) +#error "MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) && \ + ( !defined(MBEDTLS_ECDH_C) || !defined(MBEDTLS_RSA_C) || \ + !defined(MBEDTLS_X509_CRT_PARSE_C) || !defined(MBEDTLS_PKCS1_V15) ) +#error "MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) && \ + ( !defined(MBEDTLS_ECDH_C) || !defined(MBEDTLS_ECDSA_C) || \ + !defined(MBEDTLS_X509_CRT_PARSE_C) ) +#error "MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) && \ + ( !defined(MBEDTLS_RSA_C) || !defined(MBEDTLS_X509_CRT_PARSE_C) || \ + !defined(MBEDTLS_PKCS1_V15) ) +#error "MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) && \ + ( !defined(MBEDTLS_RSA_C) || !defined(MBEDTLS_X509_CRT_PARSE_C) || \ + !defined(MBEDTLS_PKCS1_V15) ) +#error "MBEDTLS_KEY_EXCHANGE_RSA_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) && \ + ( !defined(MBEDTLS_ECJPAKE_C) || !defined(MBEDTLS_SHA256_C) || \ + !defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) ) +#error "MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) && \ + ( !defined(MBEDTLS_PLATFORM_C) || !defined(MBEDTLS_PLATFORM_MEMORY) ) +#error "MBEDTLS_MEMORY_BUFFER_ALLOC_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PADLOCK_C) && !defined(MBEDTLS_HAVE_ASM) +#error "MBEDTLS_PADLOCK_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PEM_PARSE_C) && !defined(MBEDTLS_BASE64_C) +#error "MBEDTLS_PEM_PARSE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PEM_WRITE_C) && !defined(MBEDTLS_BASE64_C) +#error "MBEDTLS_PEM_WRITE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PK_C) && \ + ( !defined(MBEDTLS_RSA_C) && !defined(MBEDTLS_ECP_C) ) +#error "MBEDTLS_PK_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PK_PARSE_C) && !defined(MBEDTLS_PK_C) +#error "MBEDTLS_PK_PARSE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PK_WRITE_C) && !defined(MBEDTLS_PK_C) +#error "MBEDTLS_PK_WRITE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PKCS11_C) && !defined(MBEDTLS_PK_C) +#error "MBEDTLS_PKCS11_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_EXIT_ALT) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_EXIT_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_EXIT_MACRO) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_EXIT_MACRO defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_EXIT_MACRO) &&\ + ( defined(MBEDTLS_PLATFORM_STD_EXIT) ||\ + defined(MBEDTLS_PLATFORM_EXIT_ALT) ) +#error "MBEDTLS_PLATFORM_EXIT_MACRO and MBEDTLS_PLATFORM_STD_EXIT/MBEDTLS_PLATFORM_EXIT_ALT cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_TIME_ALT) &&\ + ( !defined(MBEDTLS_PLATFORM_C) ||\ + !defined(MBEDTLS_HAVE_TIME) ) +#error "MBEDTLS_PLATFORM_TIME_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_TIME_MACRO) &&\ + ( !defined(MBEDTLS_PLATFORM_C) ||\ + !defined(MBEDTLS_HAVE_TIME) ) +#error "MBEDTLS_PLATFORM_TIME_MACRO defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_TIME_TYPE_MACRO) &&\ + ( !defined(MBEDTLS_PLATFORM_C) ||\ + !defined(MBEDTLS_HAVE_TIME) ) +#error "MBEDTLS_PLATFORM_TIME_TYPE_MACRO defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_TIME_MACRO) &&\ + ( defined(MBEDTLS_PLATFORM_STD_TIME) ||\ + defined(MBEDTLS_PLATFORM_TIME_ALT) ) +#error "MBEDTLS_PLATFORM_TIME_MACRO and MBEDTLS_PLATFORM_STD_TIME/MBEDTLS_PLATFORM_TIME_ALT cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_TIME_TYPE_MACRO) &&\ + ( defined(MBEDTLS_PLATFORM_STD_TIME) ||\ + defined(MBEDTLS_PLATFORM_TIME_ALT) ) +#error "MBEDTLS_PLATFORM_TIME_TYPE_MACRO and MBEDTLS_PLATFORM_STD_TIME/MBEDTLS_PLATFORM_TIME_ALT cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_FPRINTF_ALT) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_FPRINTF_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_FPRINTF_MACRO) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_FPRINTF_MACRO defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_FPRINTF_MACRO) &&\ + ( defined(MBEDTLS_PLATFORM_STD_FPRINTF) ||\ + defined(MBEDTLS_PLATFORM_FPRINTF_ALT) ) +#error "MBEDTLS_PLATFORM_FPRINTF_MACRO and MBEDTLS_PLATFORM_STD_FPRINTF/MBEDTLS_PLATFORM_FPRINTF_ALT cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_FREE_MACRO) &&\ + ( !defined(MBEDTLS_PLATFORM_C) || !defined(MBEDTLS_PLATFORM_MEMORY) ) +#error "MBEDTLS_PLATFORM_FREE_MACRO defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_FREE_MACRO) &&\ + defined(MBEDTLS_PLATFORM_STD_FREE) +#error "MBEDTLS_PLATFORM_FREE_MACRO and MBEDTLS_PLATFORM_STD_FREE cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_FREE_MACRO) && !defined(MBEDTLS_PLATFORM_CALLOC_MACRO) +#error "MBEDTLS_PLATFORM_CALLOC_MACRO must be defined if MBEDTLS_PLATFORM_FREE_MACRO is" +#endif + +#if defined(MBEDTLS_PLATFORM_CALLOC_MACRO) &&\ + ( !defined(MBEDTLS_PLATFORM_C) || !defined(MBEDTLS_PLATFORM_MEMORY) ) +#error "MBEDTLS_PLATFORM_CALLOC_MACRO defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_CALLOC_MACRO) &&\ + defined(MBEDTLS_PLATFORM_STD_CALLOC) +#error "MBEDTLS_PLATFORM_CALLOC_MACRO and MBEDTLS_PLATFORM_STD_CALLOC cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_CALLOC_MACRO) && !defined(MBEDTLS_PLATFORM_FREE_MACRO) +#error "MBEDTLS_PLATFORM_FREE_MACRO must be defined if MBEDTLS_PLATFORM_CALLOC_MACRO is" +#endif + +#if defined(MBEDTLS_PLATFORM_MEMORY) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_MEMORY defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_PRINTF_ALT) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_PRINTF_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_PRINTF_MACRO) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_PRINTF_MACRO defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_PRINTF_MACRO) &&\ + ( defined(MBEDTLS_PLATFORM_STD_PRINTF) ||\ + defined(MBEDTLS_PLATFORM_PRINTF_ALT) ) +#error "MBEDTLS_PLATFORM_PRINTF_MACRO and MBEDTLS_PLATFORM_STD_PRINTF/MBEDTLS_PLATFORM_PRINTF_ALT cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_SNPRINTF_ALT) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_SNPRINTF_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_SNPRINTF_MACRO) && !defined(MBEDTLS_PLATFORM_C) +#error "MBEDTLS_PLATFORM_SNPRINTF_MACRO defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_SNPRINTF_MACRO) &&\ + ( defined(MBEDTLS_PLATFORM_STD_SNPRINTF) ||\ + defined(MBEDTLS_PLATFORM_SNPRINTF_ALT) ) +#error "MBEDTLS_PLATFORM_SNPRINTF_MACRO and MBEDTLS_PLATFORM_STD_SNPRINTF/MBEDTLS_PLATFORM_SNPRINTF_ALT cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_MEM_HDR) &&\ + !defined(MBEDTLS_PLATFORM_NO_STD_FUNCTIONS) +#error "MBEDTLS_PLATFORM_STD_MEM_HDR defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_CALLOC) && !defined(MBEDTLS_PLATFORM_MEMORY) +#error "MBEDTLS_PLATFORM_STD_CALLOC defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_CALLOC) && !defined(MBEDTLS_PLATFORM_MEMORY) +#error "MBEDTLS_PLATFORM_STD_CALLOC defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_FREE) && !defined(MBEDTLS_PLATFORM_MEMORY) +#error "MBEDTLS_PLATFORM_STD_FREE defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_EXIT) &&\ + !defined(MBEDTLS_PLATFORM_EXIT_ALT) +#error "MBEDTLS_PLATFORM_STD_EXIT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_TIME) &&\ + ( !defined(MBEDTLS_PLATFORM_TIME_ALT) ||\ + !defined(MBEDTLS_HAVE_TIME) ) +#error "MBEDTLS_PLATFORM_STD_TIME defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_FPRINTF) &&\ + !defined(MBEDTLS_PLATFORM_FPRINTF_ALT) +#error "MBEDTLS_PLATFORM_STD_FPRINTF defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_PRINTF) &&\ + !defined(MBEDTLS_PLATFORM_PRINTF_ALT) +#error "MBEDTLS_PLATFORM_STD_PRINTF defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_SNPRINTF) &&\ + !defined(MBEDTLS_PLATFORM_SNPRINTF_ALT) +#error "MBEDTLS_PLATFORM_STD_SNPRINTF defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_ENTROPY_NV_SEED) &&\ + ( !defined(MBEDTLS_PLATFORM_C) || !defined(MBEDTLS_ENTROPY_C) ) +#error "MBEDTLS_ENTROPY_NV_SEED defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_NV_SEED_ALT) &&\ + !defined(MBEDTLS_ENTROPY_NV_SEED) +#error "MBEDTLS_PLATFORM_NV_SEED_ALT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_NV_SEED_READ) &&\ + !defined(MBEDTLS_PLATFORM_NV_SEED_ALT) +#error "MBEDTLS_PLATFORM_STD_NV_SEED_READ defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_STD_NV_SEED_WRITE) &&\ + !defined(MBEDTLS_PLATFORM_NV_SEED_ALT) +#error "MBEDTLS_PLATFORM_STD_NV_SEED_WRITE defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_PLATFORM_NV_SEED_READ_MACRO) &&\ + ( defined(MBEDTLS_PLATFORM_STD_NV_SEED_READ) ||\ + defined(MBEDTLS_PLATFORM_NV_SEED_ALT) ) +#error "MBEDTLS_PLATFORM_NV_SEED_READ_MACRO and MBEDTLS_PLATFORM_STD_NV_SEED_READ cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO) &&\ + ( defined(MBEDTLS_PLATFORM_STD_NV_SEED_WRITE) ||\ + defined(MBEDTLS_PLATFORM_NV_SEED_ALT) ) +#error "MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO and MBEDTLS_PLATFORM_STD_NV_SEED_WRITE cannot be defined simultaneously" +#endif + +#if defined(MBEDTLS_RSA_C) && ( !defined(MBEDTLS_BIGNUM_C) || \ + !defined(MBEDTLS_OID_C) ) +#error "MBEDTLS_RSA_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_RSA_C) && ( !defined(MBEDTLS_PKCS1_V21) && \ + !defined(MBEDTLS_PKCS1_V15) ) +#error "MBEDTLS_RSA_C defined, but none of the PKCS1 versions enabled" +#endif + +#if defined(MBEDTLS_X509_RSASSA_PSS_SUPPORT) && \ + ( !defined(MBEDTLS_RSA_C) || !defined(MBEDTLS_PKCS1_V21) ) +#error "MBEDTLS_X509_RSASSA_PSS_SUPPORT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_PROTO_SSL3) && ( !defined(MBEDTLS_MD5_C) || \ + !defined(MBEDTLS_SHA1_C) ) +#error "MBEDTLS_SSL_PROTO_SSL3 defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_PROTO_TLS1) && ( !defined(MBEDTLS_MD5_C) || \ + !defined(MBEDTLS_SHA1_C) ) +#error "MBEDTLS_SSL_PROTO_TLS1 defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_PROTO_TLS1_1) && ( !defined(MBEDTLS_MD5_C) || \ + !defined(MBEDTLS_SHA1_C) ) +#error "MBEDTLS_SSL_PROTO_TLS1_1 defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && ( !defined(MBEDTLS_SHA1_C) && \ + !defined(MBEDTLS_SHA256_C) && !defined(MBEDTLS_SHA512_C) ) +#error "MBEDTLS_SSL_PROTO_TLS1_2 defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_PROTO_DTLS) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1_1) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1_2) +#error "MBEDTLS_SSL_PROTO_DTLS defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_CLI_C) && !defined(MBEDTLS_SSL_TLS_C) +#error "MBEDTLS_SSL_CLI_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_TLS_C) && ( !defined(MBEDTLS_CIPHER_C) || \ + !defined(MBEDTLS_MD_C) ) +#error "MBEDTLS_SSL_TLS_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_SRV_C) && !defined(MBEDTLS_SSL_TLS_C) +#error "MBEDTLS_SSL_SRV_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_TLS_C) && (!defined(MBEDTLS_SSL_PROTO_SSL3) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1) && !defined(MBEDTLS_SSL_PROTO_TLS1_1) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1_2)) +#error "MBEDTLS_SSL_TLS_C defined, but no protocols are active" +#endif + +#if defined(MBEDTLS_SSL_TLS_C) && (defined(MBEDTLS_SSL_PROTO_SSL3) && \ + defined(MBEDTLS_SSL_PROTO_TLS1_1) && !defined(MBEDTLS_SSL_PROTO_TLS1)) +#error "Illegal protocol selection" +#endif + +#if defined(MBEDTLS_SSL_TLS_C) && (defined(MBEDTLS_SSL_PROTO_TLS1) && \ + defined(MBEDTLS_SSL_PROTO_TLS1_2) && !defined(MBEDTLS_SSL_PROTO_TLS1_1)) +#error "Illegal protocol selection" +#endif + +#if defined(MBEDTLS_SSL_TLS_C) && (defined(MBEDTLS_SSL_PROTO_SSL3) && \ + defined(MBEDTLS_SSL_PROTO_TLS1_2) && (!defined(MBEDTLS_SSL_PROTO_TLS1) || \ + !defined(MBEDTLS_SSL_PROTO_TLS1_1))) +#error "Illegal protocol selection" +#endif + +#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && !defined(MBEDTLS_SSL_PROTO_DTLS) +#error "MBEDTLS_SSL_DTLS_HELLO_VERIFY defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE) && \ + !defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) +#error "MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) && \ + ( !defined(MBEDTLS_SSL_TLS_C) || !defined(MBEDTLS_SSL_PROTO_DTLS) ) +#error "MBEDTLS_SSL_DTLS_ANTI_REPLAY defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) && \ + ( !defined(MBEDTLS_SSL_TLS_C) || !defined(MBEDTLS_SSL_PROTO_DTLS) ) +#error "MBEDTLS_SSL_DTLS_BADMAC_LIMIT defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1_1) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1_2) +#error "MBEDTLS_SSL_ENCRYPT_THEN_MAC defined, but not all prerequsites" +#endif + +#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1_1) && \ + !defined(MBEDTLS_SSL_PROTO_TLS1_2) +#error "MBEDTLS_SSL_EXTENDED_MASTER_SECRET defined, but not all prerequsites" +#endif + +#if defined(MBEDTLS_SSL_TICKET_C) && !defined(MBEDTLS_CIPHER_C) +#error "MBEDTLS_SSL_TICKET_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) && \ + !defined(MBEDTLS_SSL_PROTO_SSL3) && !defined(MBEDTLS_SSL_PROTO_TLS1) +#error "MBEDTLS_SSL_CBC_RECORD_SPLITTING defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) && \ + !defined(MBEDTLS_X509_CRT_PARSE_C) +#error "MBEDTLS_SSL_SERVER_NAME_INDICATION defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_THREADING_PTHREAD) +#if !defined(MBEDTLS_THREADING_C) || defined(MBEDTLS_THREADING_IMPL) +#error "MBEDTLS_THREADING_PTHREAD defined, but not all prerequisites" +#endif +#define MBEDTLS_THREADING_IMPL +#endif + +#if defined(MBEDTLS_THREADING_ALT) +#if !defined(MBEDTLS_THREADING_C) || defined(MBEDTLS_THREADING_IMPL) +#error "MBEDTLS_THREADING_ALT defined, but not all prerequisites" +#endif +#define MBEDTLS_THREADING_IMPL +#endif + +#if defined(MBEDTLS_THREADING_C) && !defined(MBEDTLS_THREADING_IMPL) +#error "MBEDTLS_THREADING_C defined, single threading implementation required" +#endif +#undef MBEDTLS_THREADING_IMPL + +#if defined(MBEDTLS_VERSION_FEATURES) && !defined(MBEDTLS_VERSION_C) +#error "MBEDTLS_VERSION_FEATURES defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_X509_USE_C) && ( !defined(MBEDTLS_BIGNUM_C) || \ + !defined(MBEDTLS_OID_C) || !defined(MBEDTLS_ASN1_PARSE_C) || \ + !defined(MBEDTLS_PK_PARSE_C) ) +#error "MBEDTLS_X509_USE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_X509_CREATE_C) && ( !defined(MBEDTLS_BIGNUM_C) || \ + !defined(MBEDTLS_OID_C) || !defined(MBEDTLS_ASN1_WRITE_C) || \ + !defined(MBEDTLS_PK_WRITE_C) ) +#error "MBEDTLS_X509_CREATE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_X509_CRT_PARSE_C) && ( !defined(MBEDTLS_X509_USE_C) ) +#error "MBEDTLS_X509_CRT_PARSE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_X509_CRL_PARSE_C) && ( !defined(MBEDTLS_X509_USE_C) ) +#error "MBEDTLS_X509_CRL_PARSE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_X509_CSR_PARSE_C) && ( !defined(MBEDTLS_X509_USE_C) ) +#error "MBEDTLS_X509_CSR_PARSE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_X509_CRT_WRITE_C) && ( !defined(MBEDTLS_X509_CREATE_C) ) +#error "MBEDTLS_X509_CRT_WRITE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_X509_CSR_WRITE_C) && ( !defined(MBEDTLS_X509_CREATE_C) ) +#error "MBEDTLS_X509_CSR_WRITE_C defined, but not all prerequisites" +#endif + +#if defined(MBEDTLS_HAVE_INT32) && defined(MBEDTLS_HAVE_INT64) +#error "MBEDTLS_HAVE_INT32 and MBEDTLS_HAVE_INT64 cannot be defined simultaneously" +#endif /* MBEDTLS_HAVE_INT32 && MBEDTLS_HAVE_INT64 */ + +#if ( defined(MBEDTLS_HAVE_INT32) || defined(MBEDTLS_HAVE_INT64) ) && \ + defined(MBEDTLS_HAVE_ASM) +#error "MBEDTLS_HAVE_INT32/MBEDTLS_HAVE_INT64 and MBEDTLS_HAVE_ASM cannot be defined simultaneously" +#endif /* (MBEDTLS_HAVE_INT32 || MBEDTLS_HAVE_INT64) && MBEDTLS_HAVE_ASM */ + +/* + * Avoid warning from -pedantic. This is a convenient place for this + * workaround since this is included by every single file before the + * #if defined(MBEDTLS_xxx_C) that results in emtpy translation units. + */ +typedef int mbedtls_iso_c_forbids_empty_translation_units; + +#endif /* MBEDTLS_CHECK_CONFIG_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cipher.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cipher.h new file mode 100644 index 000000000..082a69174 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cipher.h @@ -0,0 +1,872 @@ +/** + * \file cipher.h + * + * \brief This file contains an abstraction interface for use with the cipher + * primitives provided by the library. It provides a common interface to all of + * the available cipher operations. + * + * \author Adriaan de Jong <dejong@fox-it.com> + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_CIPHER_H +#define MBEDTLS_CIPHER_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include "platform_util.h" + +#if defined(MBEDTLS_GCM_C) || defined(MBEDTLS_CCM_C) || defined(MBEDTLS_CHACHAPOLY_C) +#define MBEDTLS_CIPHER_MODE_AEAD +#endif + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +#define MBEDTLS_CIPHER_MODE_WITH_PADDING +#endif + +#if defined(MBEDTLS_ARC4_C) || defined(MBEDTLS_CIPHER_NULL_CIPHER) || \ + defined(MBEDTLS_CHACHA20_C) +#define MBEDTLS_CIPHER_MODE_STREAM +#endif + +#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \ + !defined(inline) && !defined(__cplusplus) +#define inline __inline +#endif + +#define MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE -0x6080 /**< The selected feature is not available. */ +#define MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA -0x6100 /**< Bad input parameters. */ +#define MBEDTLS_ERR_CIPHER_ALLOC_FAILED -0x6180 /**< Failed to allocate memory. */ +#define MBEDTLS_ERR_CIPHER_INVALID_PADDING -0x6200 /**< Input data contains invalid padding and is rejected. */ +#define MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED -0x6280 /**< Decryption of block requires a full block. */ +#define MBEDTLS_ERR_CIPHER_AUTH_FAILED -0x6300 /**< Authentication failed (for AEAD modes). */ +#define MBEDTLS_ERR_CIPHER_INVALID_CONTEXT -0x6380 /**< The context is invalid. For example, because it was freed. */ + +/* MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_CIPHER_HW_ACCEL_FAILED -0x6400 /**< Cipher hardware accelerator failed. */ + +#define MBEDTLS_CIPHER_VARIABLE_IV_LEN 0x01 /**< Cipher accepts IVs of variable length. */ +#define MBEDTLS_CIPHER_VARIABLE_KEY_LEN 0x02 /**< Cipher accepts keys of variable length. */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Supported cipher types. + * + * \warning RC4 and DES are considered weak ciphers and their use + * constitutes a security risk. Arm recommends considering stronger + * ciphers instead. + */ +typedef enum { + MBEDTLS_CIPHER_ID_NONE = 0, /**< Placeholder to mark the end of cipher ID lists. */ + MBEDTLS_CIPHER_ID_NULL, /**< The identity cipher, treated as a stream cipher. */ + MBEDTLS_CIPHER_ID_AES, /**< The AES cipher. */ + MBEDTLS_CIPHER_ID_DES, /**< The DES cipher. */ + MBEDTLS_CIPHER_ID_3DES, /**< The Triple DES cipher. */ + MBEDTLS_CIPHER_ID_CAMELLIA, /**< The Camellia cipher. */ + MBEDTLS_CIPHER_ID_BLOWFISH, /**< The Blowfish cipher. */ + MBEDTLS_CIPHER_ID_ARC4, /**< The RC4 cipher. */ + MBEDTLS_CIPHER_ID_ARIA, /**< The Aria cipher. */ + MBEDTLS_CIPHER_ID_CHACHA20, /**< The ChaCha20 cipher. */ +} mbedtls_cipher_id_t; + +/** + * \brief Supported {cipher type, cipher mode} pairs. + * + * \warning RC4 and DES are considered weak ciphers and their use + * constitutes a security risk. Arm recommends considering stronger + * ciphers instead. + */ +typedef enum { + MBEDTLS_CIPHER_NONE = 0, /**< Placeholder to mark the end of cipher-pair lists. */ + MBEDTLS_CIPHER_NULL, /**< The identity stream cipher. */ + MBEDTLS_CIPHER_AES_128_ECB, /**< AES cipher with 128-bit ECB mode. */ + MBEDTLS_CIPHER_AES_192_ECB, /**< AES cipher with 192-bit ECB mode. */ + MBEDTLS_CIPHER_AES_256_ECB, /**< AES cipher with 256-bit ECB mode. */ + MBEDTLS_CIPHER_AES_128_CBC, /**< AES cipher with 128-bit CBC mode. */ + MBEDTLS_CIPHER_AES_192_CBC, /**< AES cipher with 192-bit CBC mode. */ + MBEDTLS_CIPHER_AES_256_CBC, /**< AES cipher with 256-bit CBC mode. */ + MBEDTLS_CIPHER_AES_128_CFB128, /**< AES cipher with 128-bit CFB128 mode. */ + MBEDTLS_CIPHER_AES_192_CFB128, /**< AES cipher with 192-bit CFB128 mode. */ + MBEDTLS_CIPHER_AES_256_CFB128, /**< AES cipher with 256-bit CFB128 mode. */ + MBEDTLS_CIPHER_AES_128_CTR, /**< AES cipher with 128-bit CTR mode. */ + MBEDTLS_CIPHER_AES_192_CTR, /**< AES cipher with 192-bit CTR mode. */ + MBEDTLS_CIPHER_AES_256_CTR, /**< AES cipher with 256-bit CTR mode. */ + MBEDTLS_CIPHER_AES_128_GCM, /**< AES cipher with 128-bit GCM mode. */ + MBEDTLS_CIPHER_AES_192_GCM, /**< AES cipher with 192-bit GCM mode. */ + MBEDTLS_CIPHER_AES_256_GCM, /**< AES cipher with 256-bit GCM mode. */ + MBEDTLS_CIPHER_CAMELLIA_128_ECB, /**< Camellia cipher with 128-bit ECB mode. */ + MBEDTLS_CIPHER_CAMELLIA_192_ECB, /**< Camellia cipher with 192-bit ECB mode. */ + MBEDTLS_CIPHER_CAMELLIA_256_ECB, /**< Camellia cipher with 256-bit ECB mode. */ + MBEDTLS_CIPHER_CAMELLIA_128_CBC, /**< Camellia cipher with 128-bit CBC mode. */ + MBEDTLS_CIPHER_CAMELLIA_192_CBC, /**< Camellia cipher with 192-bit CBC mode. */ + MBEDTLS_CIPHER_CAMELLIA_256_CBC, /**< Camellia cipher with 256-bit CBC mode. */ + MBEDTLS_CIPHER_CAMELLIA_128_CFB128, /**< Camellia cipher with 128-bit CFB128 mode. */ + MBEDTLS_CIPHER_CAMELLIA_192_CFB128, /**< Camellia cipher with 192-bit CFB128 mode. */ + MBEDTLS_CIPHER_CAMELLIA_256_CFB128, /**< Camellia cipher with 256-bit CFB128 mode. */ + MBEDTLS_CIPHER_CAMELLIA_128_CTR, /**< Camellia cipher with 128-bit CTR mode. */ + MBEDTLS_CIPHER_CAMELLIA_192_CTR, /**< Camellia cipher with 192-bit CTR mode. */ + MBEDTLS_CIPHER_CAMELLIA_256_CTR, /**< Camellia cipher with 256-bit CTR mode. */ + MBEDTLS_CIPHER_CAMELLIA_128_GCM, /**< Camellia cipher with 128-bit GCM mode. */ + MBEDTLS_CIPHER_CAMELLIA_192_GCM, /**< Camellia cipher with 192-bit GCM mode. */ + MBEDTLS_CIPHER_CAMELLIA_256_GCM, /**< Camellia cipher with 256-bit GCM mode. */ + MBEDTLS_CIPHER_DES_ECB, /**< DES cipher with ECB mode. */ + MBEDTLS_CIPHER_DES_CBC, /**< DES cipher with CBC mode. */ + MBEDTLS_CIPHER_DES_EDE_ECB, /**< DES cipher with EDE ECB mode. */ + MBEDTLS_CIPHER_DES_EDE_CBC, /**< DES cipher with EDE CBC mode. */ + MBEDTLS_CIPHER_DES_EDE3_ECB, /**< DES cipher with EDE3 ECB mode. */ + MBEDTLS_CIPHER_DES_EDE3_CBC, /**< DES cipher with EDE3 CBC mode. */ + MBEDTLS_CIPHER_BLOWFISH_ECB, /**< Blowfish cipher with ECB mode. */ + MBEDTLS_CIPHER_BLOWFISH_CBC, /**< Blowfish cipher with CBC mode. */ + MBEDTLS_CIPHER_BLOWFISH_CFB64, /**< Blowfish cipher with CFB64 mode. */ + MBEDTLS_CIPHER_BLOWFISH_CTR, /**< Blowfish cipher with CTR mode. */ + MBEDTLS_CIPHER_ARC4_128, /**< RC4 cipher with 128-bit mode. */ + MBEDTLS_CIPHER_AES_128_CCM, /**< AES cipher with 128-bit CCM mode. */ + MBEDTLS_CIPHER_AES_192_CCM, /**< AES cipher with 192-bit CCM mode. */ + MBEDTLS_CIPHER_AES_256_CCM, /**< AES cipher with 256-bit CCM mode. */ + MBEDTLS_CIPHER_CAMELLIA_128_CCM, /**< Camellia cipher with 128-bit CCM mode. */ + MBEDTLS_CIPHER_CAMELLIA_192_CCM, /**< Camellia cipher with 192-bit CCM mode. */ + MBEDTLS_CIPHER_CAMELLIA_256_CCM, /**< Camellia cipher with 256-bit CCM mode. */ + MBEDTLS_CIPHER_ARIA_128_ECB, /**< Aria cipher with 128-bit key and ECB mode. */ + MBEDTLS_CIPHER_ARIA_192_ECB, /**< Aria cipher with 192-bit key and ECB mode. */ + MBEDTLS_CIPHER_ARIA_256_ECB, /**< Aria cipher with 256-bit key and ECB mode. */ + MBEDTLS_CIPHER_ARIA_128_CBC, /**< Aria cipher with 128-bit key and CBC mode. */ + MBEDTLS_CIPHER_ARIA_192_CBC, /**< Aria cipher with 192-bit key and CBC mode. */ + MBEDTLS_CIPHER_ARIA_256_CBC, /**< Aria cipher with 256-bit key and CBC mode. */ + MBEDTLS_CIPHER_ARIA_128_CFB128, /**< Aria cipher with 128-bit key and CFB-128 mode. */ + MBEDTLS_CIPHER_ARIA_192_CFB128, /**< Aria cipher with 192-bit key and CFB-128 mode. */ + MBEDTLS_CIPHER_ARIA_256_CFB128, /**< Aria cipher with 256-bit key and CFB-128 mode. */ + MBEDTLS_CIPHER_ARIA_128_CTR, /**< Aria cipher with 128-bit key and CTR mode. */ + MBEDTLS_CIPHER_ARIA_192_CTR, /**< Aria cipher with 192-bit key and CTR mode. */ + MBEDTLS_CIPHER_ARIA_256_CTR, /**< Aria cipher with 256-bit key and CTR mode. */ + MBEDTLS_CIPHER_ARIA_128_GCM, /**< Aria cipher with 128-bit key and GCM mode. */ + MBEDTLS_CIPHER_ARIA_192_GCM, /**< Aria cipher with 192-bit key and GCM mode. */ + MBEDTLS_CIPHER_ARIA_256_GCM, /**< Aria cipher with 256-bit key and GCM mode. */ + MBEDTLS_CIPHER_ARIA_128_CCM, /**< Aria cipher with 128-bit key and CCM mode. */ + MBEDTLS_CIPHER_ARIA_192_CCM, /**< Aria cipher with 192-bit key and CCM mode. */ + MBEDTLS_CIPHER_ARIA_256_CCM, /**< Aria cipher with 256-bit key and CCM mode. */ + MBEDTLS_CIPHER_AES_128_OFB, /**< AES 128-bit cipher in OFB mode. */ + MBEDTLS_CIPHER_AES_192_OFB, /**< AES 192-bit cipher in OFB mode. */ + MBEDTLS_CIPHER_AES_256_OFB, /**< AES 256-bit cipher in OFB mode. */ + MBEDTLS_CIPHER_AES_128_XTS, /**< AES 128-bit cipher in XTS block mode. */ + MBEDTLS_CIPHER_AES_256_XTS, /**< AES 256-bit cipher in XTS block mode. */ + MBEDTLS_CIPHER_CHACHA20, /**< ChaCha20 stream cipher. */ + MBEDTLS_CIPHER_CHACHA20_POLY1305, /**< ChaCha20-Poly1305 AEAD cipher. */ +} mbedtls_cipher_type_t; + +/** Supported cipher modes. */ +typedef enum { + MBEDTLS_MODE_NONE = 0, /**< None. */ + MBEDTLS_MODE_ECB, /**< The ECB cipher mode. */ + MBEDTLS_MODE_CBC, /**< The CBC cipher mode. */ + MBEDTLS_MODE_CFB, /**< The CFB cipher mode. */ + MBEDTLS_MODE_OFB, /**< The OFB cipher mode. */ + MBEDTLS_MODE_CTR, /**< The CTR cipher mode. */ + MBEDTLS_MODE_GCM, /**< The GCM cipher mode. */ + MBEDTLS_MODE_STREAM, /**< The stream cipher mode. */ + MBEDTLS_MODE_CCM, /**< The CCM cipher mode. */ + MBEDTLS_MODE_XTS, /**< The XTS cipher mode. */ + MBEDTLS_MODE_CHACHAPOLY, /**< The ChaCha-Poly cipher mode. */ +} mbedtls_cipher_mode_t; + +/** Supported cipher padding types. */ +typedef enum { + MBEDTLS_PADDING_PKCS7 = 0, /**< PKCS7 padding (default). */ + MBEDTLS_PADDING_ONE_AND_ZEROS, /**< ISO/IEC 7816-4 padding. */ + MBEDTLS_PADDING_ZEROS_AND_LEN, /**< ANSI X.923 padding. */ + MBEDTLS_PADDING_ZEROS, /**< Zero padding (not reversible). */ + MBEDTLS_PADDING_NONE, /**< Never pad (full blocks only). */ +} mbedtls_cipher_padding_t; + +/** Type of operation. */ +typedef enum { + MBEDTLS_OPERATION_NONE = -1, + MBEDTLS_DECRYPT = 0, + MBEDTLS_ENCRYPT, +} mbedtls_operation_t; + +enum { + /** Undefined key length. */ + MBEDTLS_KEY_LENGTH_NONE = 0, + /** Key length, in bits (including parity), for DES keys. */ + MBEDTLS_KEY_LENGTH_DES = 64, + /** Key length in bits, including parity, for DES in two-key EDE. */ + MBEDTLS_KEY_LENGTH_DES_EDE = 128, + /** Key length in bits, including parity, for DES in three-key EDE. */ + MBEDTLS_KEY_LENGTH_DES_EDE3 = 192, +}; + +/** Maximum length of any IV, in Bytes. */ +#define MBEDTLS_MAX_IV_LENGTH 16 +/** Maximum block size of any cipher, in Bytes. */ +#define MBEDTLS_MAX_BLOCK_LENGTH 16 + +/** + * Base cipher information (opaque struct). + */ +typedef struct mbedtls_cipher_base_t mbedtls_cipher_base_t; + +/** + * CMAC context (opaque struct). + */ +typedef struct mbedtls_cmac_context_t mbedtls_cmac_context_t; + +/** + * Cipher information. Allows calling cipher functions + * in a generic way. + */ +typedef struct mbedtls_cipher_info_t +{ + /** Full cipher identifier. For example, + * MBEDTLS_CIPHER_AES_256_CBC. + */ + mbedtls_cipher_type_t type; + + /** The cipher mode. For example, MBEDTLS_MODE_CBC. */ + mbedtls_cipher_mode_t mode; + + /** The cipher key length, in bits. This is the + * default length for variable sized ciphers. + * Includes parity bits for ciphers like DES. + */ + unsigned int key_bitlen; + + /** Name of the cipher. */ + const char * name; + + /** IV or nonce size, in Bytes. + * For ciphers that accept variable IV sizes, + * this is the recommended size. + */ + unsigned int iv_size; + + /** Bitflag comprised of MBEDTLS_CIPHER_VARIABLE_IV_LEN and + * MBEDTLS_CIPHER_VARIABLE_KEY_LEN indicating whether the + * cipher supports variable IV or variable key sizes, respectively. + */ + int flags; + + /** The block size, in Bytes. */ + unsigned int block_size; + + /** Struct for base cipher information and functions. */ + const mbedtls_cipher_base_t *base; + +} mbedtls_cipher_info_t; + +/** + * Generic cipher context. + */ +typedef struct mbedtls_cipher_context_t +{ + /** Information about the associated cipher. */ + const mbedtls_cipher_info_t *cipher_info; + + /** Key length to use. */ + int key_bitlen; + + /** Operation that the key of the context has been + * initialized for. + */ + mbedtls_operation_t operation; + +#if defined(MBEDTLS_CIPHER_MODE_WITH_PADDING) + /** Padding functions to use, if relevant for + * the specific cipher mode. + */ + void (*add_padding)( unsigned char *output, size_t olen, size_t data_len ); + int (*get_padding)( unsigned char *input, size_t ilen, size_t *data_len ); +#endif + + /** Buffer for input that has not been processed yet. */ + unsigned char unprocessed_data[MBEDTLS_MAX_BLOCK_LENGTH]; + + /** Number of Bytes that have not been processed yet. */ + size_t unprocessed_len; + + /** Current IV or NONCE_COUNTER for CTR-mode, data unit (or sector) number + * for XTS-mode. */ + unsigned char iv[MBEDTLS_MAX_IV_LENGTH]; + + /** IV size in Bytes, for ciphers with variable-length IVs. */ + size_t iv_size; + + /** The cipher-specific context. */ + void *cipher_ctx; + +#if defined(MBEDTLS_CMAC_C) + /** CMAC-specific context. */ + mbedtls_cmac_context_t *cmac_ctx; +#endif +} mbedtls_cipher_context_t; + +/** + * \brief This function retrieves the list of ciphers supported by the generic + * cipher module. + * + * \return A statically-allocated array of ciphers. The last entry + * is zero. + */ +const int *mbedtls_cipher_list( void ); + +/** + * \brief This function retrieves the cipher-information + * structure associated with the given cipher name. + * + * \param cipher_name Name of the cipher to search for. This must not be + * \c NULL. + * + * \return The cipher information structure associated with the + * given \p cipher_name. + * \return \c NULL if the associated cipher information is not found. + */ +const mbedtls_cipher_info_t *mbedtls_cipher_info_from_string( const char *cipher_name ); + +/** + * \brief This function retrieves the cipher-information + * structure associated with the given cipher type. + * + * \param cipher_type Type of the cipher to search for. + * + * \return The cipher information structure associated with the + * given \p cipher_type. + * \return \c NULL if the associated cipher information is not found. + */ +const mbedtls_cipher_info_t *mbedtls_cipher_info_from_type( const mbedtls_cipher_type_t cipher_type ); + +/** + * \brief This function retrieves the cipher-information + * structure associated with the given cipher ID, + * key size and mode. + * + * \param cipher_id The ID of the cipher to search for. For example, + * #MBEDTLS_CIPHER_ID_AES. + * \param key_bitlen The length of the key in bits. + * \param mode The cipher mode. For example, #MBEDTLS_MODE_CBC. + * + * \return The cipher information structure associated with the + * given \p cipher_id. + * \return \c NULL if the associated cipher information is not found. + */ +const mbedtls_cipher_info_t *mbedtls_cipher_info_from_values( const mbedtls_cipher_id_t cipher_id, + int key_bitlen, + const mbedtls_cipher_mode_t mode ); + +/** + * \brief This function initializes a \p cipher_context as NONE. + * + * \param ctx The context to be initialized. This must not be \c NULL. + */ +void mbedtls_cipher_init( mbedtls_cipher_context_t *ctx ); + +/** + * \brief This function frees and clears the cipher-specific + * context of \p ctx. Freeing \p ctx itself remains the + * responsibility of the caller. + * + * \param ctx The context to be freed. If this is \c NULL, the + * function has no effect, otherwise this must point to an + * initialized context. + */ +void mbedtls_cipher_free( mbedtls_cipher_context_t *ctx ); + + +/** + * \brief This function initializes and fills the cipher-context + * structure with the appropriate values. It also clears + * the structure. + * + * \param ctx The context to initialize. This must be initialized. + * \param cipher_info The cipher to use. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + * \return #MBEDTLS_ERR_CIPHER_ALLOC_FAILED if allocation of the + * cipher-specific context fails. + * + * \internal Currently, the function also clears the structure. + * In future versions, the caller will be required to call + * mbedtls_cipher_init() on the structure first. + */ +int mbedtls_cipher_setup( mbedtls_cipher_context_t *ctx, + const mbedtls_cipher_info_t *cipher_info ); + +/** + * \brief This function returns the block size of the given cipher. + * + * \param ctx The context of the cipher. This must be initialized. + * + * \return The block size of the underlying cipher. + * \return \c 0 if \p ctx has not been initialized. + */ +static inline unsigned int mbedtls_cipher_get_block_size( + const mbedtls_cipher_context_t *ctx ) +{ + MBEDTLS_INTERNAL_VALIDATE_RET( ctx != NULL, 0 ); + if( ctx->cipher_info == NULL ) + return 0; + + return ctx->cipher_info->block_size; +} + +/** + * \brief This function returns the mode of operation for + * the cipher. For example, MBEDTLS_MODE_CBC. + * + * \param ctx The context of the cipher. This must be initialized. + * + * \return The mode of operation. + * \return #MBEDTLS_MODE_NONE if \p ctx has not been initialized. + */ +static inline mbedtls_cipher_mode_t mbedtls_cipher_get_cipher_mode( + const mbedtls_cipher_context_t *ctx ) +{ + MBEDTLS_INTERNAL_VALIDATE_RET( ctx != NULL, MBEDTLS_MODE_NONE ); + if( ctx->cipher_info == NULL ) + return MBEDTLS_MODE_NONE; + + return ctx->cipher_info->mode; +} + +/** + * \brief This function returns the size of the IV or nonce + * of the cipher, in Bytes. + * + * \param ctx The context of the cipher. This must be initialized. + * + * \return The recommended IV size if no IV has been set. + * \return \c 0 for ciphers not using an IV or a nonce. + * \return The actual size if an IV has been set. + */ +static inline int mbedtls_cipher_get_iv_size( + const mbedtls_cipher_context_t *ctx ) +{ + MBEDTLS_INTERNAL_VALIDATE_RET( ctx != NULL, 0 ); + if( ctx->cipher_info == NULL ) + return 0; + + if( ctx->iv_size != 0 ) + return (int) ctx->iv_size; + + return (int) ctx->cipher_info->iv_size; +} + +/** + * \brief This function returns the type of the given cipher. + * + * \param ctx The context of the cipher. This must be initialized. + * + * \return The type of the cipher. + * \return #MBEDTLS_CIPHER_NONE if \p ctx has not been initialized. + */ +static inline mbedtls_cipher_type_t mbedtls_cipher_get_type( + const mbedtls_cipher_context_t *ctx ) +{ + MBEDTLS_INTERNAL_VALIDATE_RET( + ctx != NULL, MBEDTLS_CIPHER_NONE ); + if( ctx->cipher_info == NULL ) + return MBEDTLS_CIPHER_NONE; + + return ctx->cipher_info->type; +} + +/** + * \brief This function returns the name of the given cipher + * as a string. + * + * \param ctx The context of the cipher. This must be initialized. + * + * \return The name of the cipher. + * \return NULL if \p ctx has not been not initialized. + */ +static inline const char *mbedtls_cipher_get_name( + const mbedtls_cipher_context_t *ctx ) +{ + MBEDTLS_INTERNAL_VALIDATE_RET( ctx != NULL, 0 ); + if( ctx->cipher_info == NULL ) + return 0; + + return ctx->cipher_info->name; +} + +/** + * \brief This function returns the key length of the cipher. + * + * \param ctx The context of the cipher. This must be initialized. + * + * \return The key length of the cipher in bits. + * \return #MBEDTLS_KEY_LENGTH_NONE if ctx \p has not been + * initialized. + */ +static inline int mbedtls_cipher_get_key_bitlen( + const mbedtls_cipher_context_t *ctx ) +{ + MBEDTLS_INTERNAL_VALIDATE_RET( + ctx != NULL, MBEDTLS_KEY_LENGTH_NONE ); + if( ctx->cipher_info == NULL ) + return MBEDTLS_KEY_LENGTH_NONE; + + return (int) ctx->cipher_info->key_bitlen; +} + +/** + * \brief This function returns the operation of the given cipher. + * + * \param ctx The context of the cipher. This must be initialized. + * + * \return The type of operation: #MBEDTLS_ENCRYPT or #MBEDTLS_DECRYPT. + * \return #MBEDTLS_OPERATION_NONE if \p ctx has not been initialized. + */ +static inline mbedtls_operation_t mbedtls_cipher_get_operation( + const mbedtls_cipher_context_t *ctx ) +{ + MBEDTLS_INTERNAL_VALIDATE_RET( + ctx != NULL, MBEDTLS_OPERATION_NONE ); + if( ctx->cipher_info == NULL ) + return MBEDTLS_OPERATION_NONE; + + return ctx->operation; +} + +/** + * \brief This function sets the key to use with the given context. + * + * \param ctx The generic cipher context. This must be initialized and + * bound to a cipher information structure. + * \param key The key to use. This must be a readable buffer of at + * least \p key_bitlen Bits. + * \param key_bitlen The key length to use, in Bits. + * \param operation The operation that the key will be used for: + * #MBEDTLS_ENCRYPT or #MBEDTLS_DECRYPT. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + * \return A cipher-specific error code on failure. + */ +int mbedtls_cipher_setkey( mbedtls_cipher_context_t *ctx, + const unsigned char *key, + int key_bitlen, + const mbedtls_operation_t operation ); + +#if defined(MBEDTLS_CIPHER_MODE_WITH_PADDING) +/** + * \brief This function sets the padding mode, for cipher modes + * that use padding. + * + * The default passing mode is PKCS7 padding. + * + * \param ctx The generic cipher context. This must be initialized and + * bound to a cipher information structure. + * \param mode The padding mode. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE + * if the selected padding mode is not supported. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA if the cipher mode + * does not support padding. + */ +int mbedtls_cipher_set_padding_mode( mbedtls_cipher_context_t *ctx, + mbedtls_cipher_padding_t mode ); +#endif /* MBEDTLS_CIPHER_MODE_WITH_PADDING */ + +/** + * \brief This function sets the initialization vector (IV) + * or nonce. + * + * \note Some ciphers do not use IVs nor nonce. For these + * ciphers, this function has no effect. + * + * \param ctx The generic cipher context. This must be initialized and + * bound to a cipher information structure. + * \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers. This + * must be a readable buffer of at least \p iv_len Bytes. + * \param iv_len The IV length for ciphers with variable-size IV. + * This parameter is discarded by ciphers with fixed-size IV. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + */ +int mbedtls_cipher_set_iv( mbedtls_cipher_context_t *ctx, + const unsigned char *iv, + size_t iv_len ); + +/** + * \brief This function resets the cipher state. + * + * \param ctx The generic cipher context. This must be initialized. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + */ +int mbedtls_cipher_reset( mbedtls_cipher_context_t *ctx ); + +#if defined(MBEDTLS_GCM_C) || defined(MBEDTLS_CHACHAPOLY_C) +/** + * \brief This function adds additional data for AEAD ciphers. + * Currently supported with GCM and ChaCha20+Poly1305. + * This must be called exactly once, after + * mbedtls_cipher_reset(). + * + * \param ctx The generic cipher context. This must be initialized. + * \param ad The additional data to use. This must be a readable + * buffer of at least \p ad_len Bytes. + * \param ad_len the Length of \p ad Bytes. + * + * \return \c 0 on success. + * \return A specific error code on failure. + */ +int mbedtls_cipher_update_ad( mbedtls_cipher_context_t *ctx, + const unsigned char *ad, size_t ad_len ); +#endif /* MBEDTLS_GCM_C || MBEDTLS_CHACHAPOLY_C */ + +/** + * \brief The generic cipher update function. It encrypts or + * decrypts using the given cipher context. Writes as + * many block-sized blocks of data as possible to output. + * Any data that cannot be written immediately is either + * added to the next block, or flushed when + * mbedtls_cipher_finish() is called. + * Exception: For MBEDTLS_MODE_ECB, expects a single block + * in size. For example, 16 Bytes for AES. + * + * \note If the underlying cipher is used in GCM mode, all calls + * to this function, except for the last one before + * mbedtls_cipher_finish(), must have \p ilen as a + * multiple of the block size of the cipher. + * + * \param ctx The generic cipher context. This must be initialized and + * bound to a key. + * \param input The buffer holding the input data. This must be a + * readable buffer of at least \p ilen Bytes. + * \param ilen The length of the input data. + * \param output The buffer for the output data. This must be able to + * hold at least `ilen + block_size`. This must not be the + * same buffer as \p input. + * \param olen The length of the output data, to be updated with the + * actual number of Bytes written. This must not be + * \c NULL. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + * \return #MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE on an + * unsupported mode for a cipher. + * \return A cipher-specific error code on failure. + */ +int mbedtls_cipher_update( mbedtls_cipher_context_t *ctx, const unsigned char *input, + size_t ilen, unsigned char *output, size_t *olen ); + +/** + * \brief The generic cipher finalization function. If data still + * needs to be flushed from an incomplete block, the data + * contained in it is padded to the size of + * the last block, and written to the \p output buffer. + * + * \param ctx The generic cipher context. This must be initialized and + * bound to a key. + * \param output The buffer to write data to. This needs to be a writable + * buffer of at least \p block_size Bytes. + * \param olen The length of the data written to the \p output buffer. + * This may not be \c NULL. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + * \return #MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED on decryption + * expecting a full block but not receiving one. + * \return #MBEDTLS_ERR_CIPHER_INVALID_PADDING on invalid padding + * while decrypting. + * \return A cipher-specific error code on failure. + */ +int mbedtls_cipher_finish( mbedtls_cipher_context_t *ctx, + unsigned char *output, size_t *olen ); + +#if defined(MBEDTLS_GCM_C) || defined(MBEDTLS_CHACHAPOLY_C) +/** + * \brief This function writes a tag for AEAD ciphers. + * Currently supported with GCM and ChaCha20+Poly1305. + * This must be called after mbedtls_cipher_finish(). + * + * \param ctx The generic cipher context. This must be initialized, + * bound to a key, and have just completed a cipher + * operation through mbedtls_cipher_finish() the tag for + * which should be written. + * \param tag The buffer to write the tag to. This must be a writable + * buffer of at least \p tag_len Bytes. + * \param tag_len The length of the tag to write. + * + * \return \c 0 on success. + * \return A specific error code on failure. + */ +int mbedtls_cipher_write_tag( mbedtls_cipher_context_t *ctx, + unsigned char *tag, size_t tag_len ); + +/** + * \brief This function checks the tag for AEAD ciphers. + * Currently supported with GCM and ChaCha20+Poly1305. + * This must be called after mbedtls_cipher_finish(). + * + * \param ctx The generic cipher context. This must be initialized. + * \param tag The buffer holding the tag. This must be a readable + * buffer of at least \p tag_len Bytes. + * \param tag_len The length of the tag to check. + * + * \return \c 0 on success. + * \return A specific error code on failure. + */ +int mbedtls_cipher_check_tag( mbedtls_cipher_context_t *ctx, + const unsigned char *tag, size_t tag_len ); +#endif /* MBEDTLS_GCM_C || MBEDTLS_CHACHAPOLY_C */ + +/** + * \brief The generic all-in-one encryption/decryption function, + * for all ciphers except AEAD constructs. + * + * \param ctx The generic cipher context. This must be initialized. + * \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers. + * This must be a readable buffer of at least \p iv_len + * Bytes. + * \param iv_len The IV length for ciphers with variable-size IV. + * This parameter is discarded by ciphers with fixed-size + * IV. + * \param input The buffer holding the input data. This must be a + * readable buffer of at least \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + * \param output The buffer for the output data. This must be able to + * hold at least `ilen + block_size`. This must not be the + * same buffer as \p input. + * \param olen The length of the output data, to be updated with the + * actual number of Bytes written. This must not be + * \c NULL. + * + * \note Some ciphers do not use IVs nor nonce. For these + * ciphers, use \p iv = NULL and \p iv_len = 0. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + * \return #MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED on decryption + * expecting a full block but not receiving one. + * \return #MBEDTLS_ERR_CIPHER_INVALID_PADDING on invalid padding + * while decrypting. + * \return A cipher-specific error code on failure. + */ +int mbedtls_cipher_crypt( mbedtls_cipher_context_t *ctx, + const unsigned char *iv, size_t iv_len, + const unsigned char *input, size_t ilen, + unsigned char *output, size_t *olen ); + +#if defined(MBEDTLS_CIPHER_MODE_AEAD) +/** + * \brief The generic autenticated encryption (AEAD) function. + * + * \param ctx The generic cipher context. This must be initialized and + * bound to a key. + * \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers. + * This must be a readable buffer of at least \p iv_len + * Bytes. + * \param iv_len The IV length for ciphers with variable-size IV. + * This parameter is discarded by ciphers with fixed-size IV. + * \param ad The additional data to authenticate. This must be a + * readable buffer of at least \p ad_len Bytes. + * \param ad_len The length of \p ad. + * \param input The buffer holding the input data. This must be a + * readable buffer of at least \p ilen Bytes. + * \param ilen The length of the input data. + * \param output The buffer for the output data. This must be able to + * hold at least \p ilen Bytes. + * \param olen The length of the output data, to be updated with the + * actual number of Bytes written. This must not be + * \c NULL. + * \param tag The buffer for the authentication tag. This must be a + * writable buffer of at least \p tag_len Bytes. + * \param tag_len The desired length of the authentication tag. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + * \return A cipher-specific error code on failure. + */ +int mbedtls_cipher_auth_encrypt( mbedtls_cipher_context_t *ctx, + const unsigned char *iv, size_t iv_len, + const unsigned char *ad, size_t ad_len, + const unsigned char *input, size_t ilen, + unsigned char *output, size_t *olen, + unsigned char *tag, size_t tag_len ); + +/** + * \brief The generic autenticated decryption (AEAD) function. + * + * \note If the data is not authentic, then the output buffer + * is zeroed out to prevent the unauthentic plaintext being + * used, making this interface safer. + * + * \param ctx The generic cipher context. This must be initialized and + * and bound to a key. + * \param iv The IV to use, or NONCE_COUNTER for CTR-mode ciphers. + * This must be a readable buffer of at least \p iv_len + * Bytes. + * \param iv_len The IV length for ciphers with variable-size IV. + * This parameter is discarded by ciphers with fixed-size IV. + * \param ad The additional data to be authenticated. This must be a + * readable buffer of at least \p ad_len Bytes. + * \param ad_len The length of \p ad. + * \param input The buffer holding the input data. This must be a + * readable buffer of at least \p ilen Bytes. + * \param ilen The length of the input data. + * \param output The buffer for the output data. + * This must be able to hold at least \p ilen Bytes. + * \param olen The length of the output data, to be updated with the + * actual number of Bytes written. This must not be + * \c NULL. + * \param tag The buffer holding the authentication tag. This must be + * a readable buffer of at least \p tag_len Bytes. + * \param tag_len The length of the authentication tag. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA on + * parameter-verification failure. + * \return #MBEDTLS_ERR_CIPHER_AUTH_FAILED if data is not authentic. + * \return A cipher-specific error code on failure. + */ +int mbedtls_cipher_auth_decrypt( mbedtls_cipher_context_t *ctx, + const unsigned char *iv, size_t iv_len, + const unsigned char *ad, size_t ad_len, + const unsigned char *input, size_t ilen, + unsigned char *output, size_t *olen, + const unsigned char *tag, size_t tag_len ); +#endif /* MBEDTLS_CIPHER_MODE_AEAD */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_CIPHER_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cipher_internal.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cipher_internal.h new file mode 100644 index 000000000..c6def0bef --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cipher_internal.h @@ -0,0 +1,125 @@ +/** + * \file cipher_internal.h + * + * \brief Cipher wrappers. + * + * \author Adriaan de Jong <dejong@fox-it.com> + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_CIPHER_WRAP_H +#define MBEDTLS_CIPHER_WRAP_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "cipher.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Base cipher information. The non-mode specific functions and values. + */ +struct mbedtls_cipher_base_t +{ + /** Base Cipher type (e.g. MBEDTLS_CIPHER_ID_AES) */ + mbedtls_cipher_id_t cipher; + + /** Encrypt using ECB */ + int (*ecb_func)( void *ctx, mbedtls_operation_t mode, + const unsigned char *input, unsigned char *output ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) + /** Encrypt using CBC */ + int (*cbc_func)( void *ctx, mbedtls_operation_t mode, size_t length, + unsigned char *iv, const unsigned char *input, + unsigned char *output ); +#endif + +#if defined(MBEDTLS_CIPHER_MODE_CFB) + /** Encrypt using CFB (Full length) */ + int (*cfb_func)( void *ctx, mbedtls_operation_t mode, size_t length, size_t *iv_off, + unsigned char *iv, const unsigned char *input, + unsigned char *output ); +#endif + +#if defined(MBEDTLS_CIPHER_MODE_OFB) + /** Encrypt using OFB (Full length) */ + int (*ofb_func)( void *ctx, size_t length, size_t *iv_off, + unsigned char *iv, + const unsigned char *input, + unsigned char *output ); +#endif + +#if defined(MBEDTLS_CIPHER_MODE_CTR) + /** Encrypt using CTR */ + int (*ctr_func)( void *ctx, size_t length, size_t *nc_off, + unsigned char *nonce_counter, unsigned char *stream_block, + const unsigned char *input, unsigned char *output ); +#endif + +#if defined(MBEDTLS_CIPHER_MODE_XTS) + /** Encrypt or decrypt using XTS. */ + int (*xts_func)( void *ctx, mbedtls_operation_t mode, size_t length, + const unsigned char data_unit[16], + const unsigned char *input, unsigned char *output ); +#endif + +#if defined(MBEDTLS_CIPHER_MODE_STREAM) + /** Encrypt using STREAM */ + int (*stream_func)( void *ctx, size_t length, + const unsigned char *input, unsigned char *output ); +#endif + + /** Set key for encryption purposes */ + int (*setkey_enc_func)( void *ctx, const unsigned char *key, + unsigned int key_bitlen ); + + /** Set key for decryption purposes */ + int (*setkey_dec_func)( void *ctx, const unsigned char *key, + unsigned int key_bitlen); + + /** Allocate a new context */ + void * (*ctx_alloc_func)( void ); + + /** Free the given context */ + void (*ctx_free_func)( void *ctx ); + +}; + +typedef struct +{ + mbedtls_cipher_type_t type; + const mbedtls_cipher_info_t *info; +} mbedtls_cipher_definition_t; + +extern const mbedtls_cipher_definition_t mbedtls_cipher_definitions[]; + +extern int mbedtls_cipher_supported[]; + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_CIPHER_WRAP_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cmac.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cmac.h new file mode 100644 index 000000000..9d42b3f20 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/cmac.h @@ -0,0 +1,213 @@ +/** + * \file cmac.h + * + * \brief This file contains CMAC definitions and functions. + * + * The Cipher-based Message Authentication Code (CMAC) Mode for + * Authentication is defined in <em>RFC-4493: The AES-CMAC Algorithm</em>. + */ +/* + * Copyright (C) 2015-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_CMAC_H +#define MBEDTLS_CMAC_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "cipher.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED -0x007A /**< CMAC hardware accelerator failed. */ + +#define MBEDTLS_AES_BLOCK_SIZE 16 +#define MBEDTLS_DES3_BLOCK_SIZE 8 + +#if defined(MBEDTLS_AES_C) +#define MBEDTLS_CIPHER_BLKSIZE_MAX 16 /**< The longest block used by CMAC is that of AES. */ +#else +#define MBEDTLS_CIPHER_BLKSIZE_MAX 8 /**< The longest block used by CMAC is that of 3DES. */ +#endif + +#if !defined(MBEDTLS_CMAC_ALT) + +/** + * The CMAC context structure. + */ +struct mbedtls_cmac_context_t +{ + /** The internal state of the CMAC algorithm. */ + unsigned char state[MBEDTLS_CIPHER_BLKSIZE_MAX]; + + /** Unprocessed data - either data that was not block aligned and is still + * pending processing, or the final block. */ + unsigned char unprocessed_block[MBEDTLS_CIPHER_BLKSIZE_MAX]; + + /** The length of data pending processing. */ + size_t unprocessed_len; +}; + +#else /* !MBEDTLS_CMAC_ALT */ +#include "cmac_alt.h" +#endif /* !MBEDTLS_CMAC_ALT */ + +/** + * \brief This function sets the CMAC key, and prepares to authenticate + * the input data. + * Must be called with an initialized cipher context. + * + * \param ctx The cipher context used for the CMAC operation, initialized + * as one of the following types: MBEDTLS_CIPHER_AES_128_ECB, + * MBEDTLS_CIPHER_AES_192_ECB, MBEDTLS_CIPHER_AES_256_ECB, + * or MBEDTLS_CIPHER_DES_EDE3_ECB. + * \param key The CMAC key. + * \param keybits The length of the CMAC key in bits. + * Must be supported by the cipher. + * + * \return \c 0 on success. + * \return A cipher-specific error code on failure. + */ +int mbedtls_cipher_cmac_starts( mbedtls_cipher_context_t *ctx, + const unsigned char *key, size_t keybits ); + +/** + * \brief This function feeds an input buffer into an ongoing CMAC + * computation. + * + * It is called between mbedtls_cipher_cmac_starts() or + * mbedtls_cipher_cmac_reset(), and mbedtls_cipher_cmac_finish(). + * Can be called repeatedly. + * + * \param ctx The cipher context used for the CMAC operation. + * \param input The buffer holding the input data. + * \param ilen The length of the input data. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA + * if parameter verification fails. + */ +int mbedtls_cipher_cmac_update( mbedtls_cipher_context_t *ctx, + const unsigned char *input, size_t ilen ); + +/** + * \brief This function finishes the CMAC operation, and writes + * the result to the output buffer. + * + * It is called after mbedtls_cipher_cmac_update(). + * It can be followed by mbedtls_cipher_cmac_reset() and + * mbedtls_cipher_cmac_update(), or mbedtls_cipher_free(). + * + * \param ctx The cipher context used for the CMAC operation. + * \param output The output buffer for the CMAC checksum result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA + * if parameter verification fails. + */ +int mbedtls_cipher_cmac_finish( mbedtls_cipher_context_t *ctx, + unsigned char *output ); + +/** + * \brief This function prepares the authentication of another + * message with the same key as the previous CMAC + * operation. + * + * It is called after mbedtls_cipher_cmac_finish() + * and before mbedtls_cipher_cmac_update(). + * + * \param ctx The cipher context used for the CMAC operation. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA + * if parameter verification fails. + */ +int mbedtls_cipher_cmac_reset( mbedtls_cipher_context_t *ctx ); + +/** + * \brief This function calculates the full generic CMAC + * on the input buffer with the provided key. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The CMAC result is calculated as + * output = generic CMAC(cmac key, input buffer). + * + * + * \param cipher_info The cipher information. + * \param key The CMAC key. + * \param keylen The length of the CMAC key in bits. + * \param input The buffer holding the input data. + * \param ilen The length of the input data. + * \param output The buffer for the generic CMAC result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA + * if parameter verification fails. + */ +int mbedtls_cipher_cmac( const mbedtls_cipher_info_t *cipher_info, + const unsigned char *key, size_t keylen, + const unsigned char *input, size_t ilen, + unsigned char *output ); + +#if defined(MBEDTLS_AES_C) +/** + * \brief This function implements the AES-CMAC-PRF-128 pseudorandom + * function, as defined in + * <em>RFC-4615: The Advanced Encryption Standard-Cipher-based + * Message Authentication Code-Pseudo-Random Function-128 + * (AES-CMAC-PRF-128) Algorithm for the Internet Key + * Exchange Protocol (IKE).</em> + * + * \param key The key to use. + * \param key_len The key length in Bytes. + * \param input The buffer holding the input data. + * \param in_len The length of the input data in Bytes. + * \param output The buffer holding the generated 16 Bytes of + * pseudorandom output. + * + * \return \c 0 on success. + */ +int mbedtls_aes_cmac_prf_128( const unsigned char *key, size_t key_len, + const unsigned char *input, size_t in_len, + unsigned char output[16] ); +#endif /* MBEDTLS_AES_C */ + +#if defined(MBEDTLS_SELF_TEST) && ( defined(MBEDTLS_AES_C) || defined(MBEDTLS_DES_C) ) +/** + * \brief The CMAC checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_cmac_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST && ( MBEDTLS_AES_C || MBEDTLS_DES_C ) */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_CMAC_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/compat-1.3.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/compat-1.3.h new file mode 100644 index 000000000..a58b47243 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/compat-1.3.h @@ -0,0 +1,2531 @@ +/** + * \file compat-1.3.h + * + * \brief Compatibility definitions for using mbed TLS with client code written + * for the PolarSSL naming conventions. + * + * \deprecated Use the new names directly instead + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#if ! defined(MBEDTLS_DEPRECATED_REMOVED) + +#if defined(MBEDTLS_DEPRECATED_WARNING) +#warning "Including compat-1.3.h is deprecated" +#endif + +#ifndef MBEDTLS_COMPAT13_H +#define MBEDTLS_COMPAT13_H + +/* + * config.h options + */ +#if defined MBEDTLS_AESNI_C +#define POLARSSL_AESNI_C MBEDTLS_AESNI_C +#endif +#if defined MBEDTLS_AES_ALT +#define POLARSSL_AES_ALT MBEDTLS_AES_ALT +#endif +#if defined MBEDTLS_AES_C +#define POLARSSL_AES_C MBEDTLS_AES_C +#endif +#if defined MBEDTLS_AES_ROM_TABLES +#define POLARSSL_AES_ROM_TABLES MBEDTLS_AES_ROM_TABLES +#endif +#if defined MBEDTLS_ARC4_ALT +#define POLARSSL_ARC4_ALT MBEDTLS_ARC4_ALT +#endif +#if defined MBEDTLS_ARC4_C +#define POLARSSL_ARC4_C MBEDTLS_ARC4_C +#endif +#if defined MBEDTLS_ASN1_PARSE_C +#define POLARSSL_ASN1_PARSE_C MBEDTLS_ASN1_PARSE_C +#endif +#if defined MBEDTLS_ASN1_WRITE_C +#define POLARSSL_ASN1_WRITE_C MBEDTLS_ASN1_WRITE_C +#endif +#if defined MBEDTLS_BASE64_C +#define POLARSSL_BASE64_C MBEDTLS_BASE64_C +#endif +#if defined MBEDTLS_BIGNUM_C +#define POLARSSL_BIGNUM_C MBEDTLS_BIGNUM_C +#endif +#if defined MBEDTLS_BLOWFISH_ALT +#define POLARSSL_BLOWFISH_ALT MBEDTLS_BLOWFISH_ALT +#endif +#if defined MBEDTLS_BLOWFISH_C +#define POLARSSL_BLOWFISH_C MBEDTLS_BLOWFISH_C +#endif +#if defined MBEDTLS_CAMELLIA_ALT +#define POLARSSL_CAMELLIA_ALT MBEDTLS_CAMELLIA_ALT +#endif +#if defined MBEDTLS_CAMELLIA_C +#define POLARSSL_CAMELLIA_C MBEDTLS_CAMELLIA_C +#endif +#if defined MBEDTLS_CAMELLIA_SMALL_MEMORY +#define POLARSSL_CAMELLIA_SMALL_MEMORY MBEDTLS_CAMELLIA_SMALL_MEMORY +#endif +#if defined MBEDTLS_CCM_C +#define POLARSSL_CCM_C MBEDTLS_CCM_C +#endif +#if defined MBEDTLS_CERTS_C +#define POLARSSL_CERTS_C MBEDTLS_CERTS_C +#endif +#if defined MBEDTLS_CIPHER_C +#define POLARSSL_CIPHER_C MBEDTLS_CIPHER_C +#endif +#if defined MBEDTLS_CIPHER_MODE_CBC +#define POLARSSL_CIPHER_MODE_CBC MBEDTLS_CIPHER_MODE_CBC +#endif +#if defined MBEDTLS_CIPHER_MODE_CFB +#define POLARSSL_CIPHER_MODE_CFB MBEDTLS_CIPHER_MODE_CFB +#endif +#if defined MBEDTLS_CIPHER_MODE_CTR +#define POLARSSL_CIPHER_MODE_CTR MBEDTLS_CIPHER_MODE_CTR +#endif +#if defined MBEDTLS_CIPHER_NULL_CIPHER +#define POLARSSL_CIPHER_NULL_CIPHER MBEDTLS_CIPHER_NULL_CIPHER +#endif +#if defined MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS +#define POLARSSL_CIPHER_PADDING_ONE_AND_ZEROS MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS +#endif +#if defined MBEDTLS_CIPHER_PADDING_PKCS7 +#define POLARSSL_CIPHER_PADDING_PKCS7 MBEDTLS_CIPHER_PADDING_PKCS7 +#endif +#if defined MBEDTLS_CIPHER_PADDING_ZEROS +#define POLARSSL_CIPHER_PADDING_ZEROS MBEDTLS_CIPHER_PADDING_ZEROS +#endif +#if defined MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN +#define POLARSSL_CIPHER_PADDING_ZEROS_AND_LEN MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN +#endif +#if defined MBEDTLS_CTR_DRBG_C +#define POLARSSL_CTR_DRBG_C MBEDTLS_CTR_DRBG_C +#endif +#if defined MBEDTLS_DEBUG_C +#define POLARSSL_DEBUG_C MBEDTLS_DEBUG_C +#endif +#if defined MBEDTLS_DEPRECATED_REMOVED +#define POLARSSL_DEPRECATED_REMOVED MBEDTLS_DEPRECATED_REMOVED +#endif +#if defined MBEDTLS_DEPRECATED_WARNING +#define POLARSSL_DEPRECATED_WARNING MBEDTLS_DEPRECATED_WARNING +#endif +#if defined MBEDTLS_DES_ALT +#define POLARSSL_DES_ALT MBEDTLS_DES_ALT +#endif +#if defined MBEDTLS_DES_C +#define POLARSSL_DES_C MBEDTLS_DES_C +#endif +#if defined MBEDTLS_DHM_C +#define POLARSSL_DHM_C MBEDTLS_DHM_C +#endif +#if defined MBEDTLS_ECDH_C +#define POLARSSL_ECDH_C MBEDTLS_ECDH_C +#endif +#if defined MBEDTLS_ECDSA_C +#define POLARSSL_ECDSA_C MBEDTLS_ECDSA_C +#endif +#if defined MBEDTLS_ECDSA_DETERMINISTIC +#define POLARSSL_ECDSA_DETERMINISTIC MBEDTLS_ECDSA_DETERMINISTIC +#endif +#if defined MBEDTLS_ECP_C +#define POLARSSL_ECP_C MBEDTLS_ECP_C +#endif +#if defined MBEDTLS_ECP_DP_BP256R1_ENABLED +#define POLARSSL_ECP_DP_BP256R1_ENABLED MBEDTLS_ECP_DP_BP256R1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_BP384R1_ENABLED +#define POLARSSL_ECP_DP_BP384R1_ENABLED MBEDTLS_ECP_DP_BP384R1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_BP512R1_ENABLED +#define POLARSSL_ECP_DP_BP512R1_ENABLED MBEDTLS_ECP_DP_BP512R1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_CURVE25519_ENABLED +#define POLARSSL_ECP_DP_M255_ENABLED MBEDTLS_ECP_DP_CURVE25519_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_SECP192K1_ENABLED +#define POLARSSL_ECP_DP_SECP192K1_ENABLED MBEDTLS_ECP_DP_SECP192K1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_SECP192R1_ENABLED +#define POLARSSL_ECP_DP_SECP192R1_ENABLED MBEDTLS_ECP_DP_SECP192R1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_SECP224K1_ENABLED +#define POLARSSL_ECP_DP_SECP224K1_ENABLED MBEDTLS_ECP_DP_SECP224K1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_SECP224R1_ENABLED +#define POLARSSL_ECP_DP_SECP224R1_ENABLED MBEDTLS_ECP_DP_SECP224R1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_SECP256K1_ENABLED +#define POLARSSL_ECP_DP_SECP256K1_ENABLED MBEDTLS_ECP_DP_SECP256K1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_SECP256R1_ENABLED +#define POLARSSL_ECP_DP_SECP256R1_ENABLED MBEDTLS_ECP_DP_SECP256R1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_SECP384R1_ENABLED +#define POLARSSL_ECP_DP_SECP384R1_ENABLED MBEDTLS_ECP_DP_SECP384R1_ENABLED +#endif +#if defined MBEDTLS_ECP_DP_SECP521R1_ENABLED +#define POLARSSL_ECP_DP_SECP521R1_ENABLED MBEDTLS_ECP_DP_SECP521R1_ENABLED +#endif +#if defined MBEDTLS_ECP_FIXED_POINT_OPTIM +#define POLARSSL_ECP_FIXED_POINT_OPTIM MBEDTLS_ECP_FIXED_POINT_OPTIM +#endif +#if defined MBEDTLS_ECP_MAX_BITS +#define POLARSSL_ECP_MAX_BITS MBEDTLS_ECP_MAX_BITS +#endif +#if defined MBEDTLS_ECP_NIST_OPTIM +#define POLARSSL_ECP_NIST_OPTIM MBEDTLS_ECP_NIST_OPTIM +#endif +#if defined MBEDTLS_ECP_WINDOW_SIZE +#define POLARSSL_ECP_WINDOW_SIZE MBEDTLS_ECP_WINDOW_SIZE +#endif +#if defined MBEDTLS_ENABLE_WEAK_CIPHERSUITES +#define POLARSSL_ENABLE_WEAK_CIPHERSUITES MBEDTLS_ENABLE_WEAK_CIPHERSUITES +#endif +#if defined MBEDTLS_ENTROPY_C +#define POLARSSL_ENTROPY_C MBEDTLS_ENTROPY_C +#endif +#if defined MBEDTLS_ENTROPY_FORCE_SHA256 +#define POLARSSL_ENTROPY_FORCE_SHA256 MBEDTLS_ENTROPY_FORCE_SHA256 +#endif +#if defined MBEDTLS_ERROR_C +#define POLARSSL_ERROR_C MBEDTLS_ERROR_C +#endif +#if defined MBEDTLS_ERROR_STRERROR_DUMMY +#define POLARSSL_ERROR_STRERROR_DUMMY MBEDTLS_ERROR_STRERROR_DUMMY +#endif +#if defined MBEDTLS_FS_IO +#define POLARSSL_FS_IO MBEDTLS_FS_IO +#endif +#if defined MBEDTLS_GCM_C +#define POLARSSL_GCM_C MBEDTLS_GCM_C +#endif +#if defined MBEDTLS_GENPRIME +#define POLARSSL_GENPRIME MBEDTLS_GENPRIME +#endif +#if defined MBEDTLS_HAVEGE_C +#define POLARSSL_HAVEGE_C MBEDTLS_HAVEGE_C +#endif +#if defined MBEDTLS_HAVE_ASM +#define POLARSSL_HAVE_ASM MBEDTLS_HAVE_ASM +#endif +#if defined MBEDTLS_HAVE_SSE2 +#define POLARSSL_HAVE_SSE2 MBEDTLS_HAVE_SSE2 +#endif +#if defined MBEDTLS_HAVE_TIME +#define POLARSSL_HAVE_TIME MBEDTLS_HAVE_TIME +#endif +#if defined MBEDTLS_HMAC_DRBG_C +#define POLARSSL_HMAC_DRBG_C MBEDTLS_HMAC_DRBG_C +#endif +#if defined MBEDTLS_HMAC_DRBG_MAX_INPUT +#define POLARSSL_HMAC_DRBG_MAX_INPUT MBEDTLS_HMAC_DRBG_MAX_INPUT +#endif +#if defined MBEDTLS_HMAC_DRBG_MAX_REQUEST +#define POLARSSL_HMAC_DRBG_MAX_REQUEST MBEDTLS_HMAC_DRBG_MAX_REQUEST +#endif +#if defined MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT +#define POLARSSL_HMAC_DRBG_MAX_SEED_INPUT MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT +#endif +#if defined MBEDTLS_HMAC_DRBG_RESEED_INTERVAL +#define POLARSSL_HMAC_DRBG_RESEED_INTERVAL MBEDTLS_HMAC_DRBG_RESEED_INTERVAL +#endif +#if defined MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED +#define POLARSSL_KEY_EXCHANGE_DHE_PSK_ENABLED MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED +#define POLARSSL_KEY_EXCHANGE_DHE_RSA_ENABLED MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED +#define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED +#define POLARSSL_KEY_EXCHANGE_ECDHE_PSK_ENABLED MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED +#define POLARSSL_KEY_EXCHANGE_ECDHE_RSA_ENABLED MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED +#define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA_ENABLED MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED +#define POLARSSL_KEY_EXCHANGE_ECDH_RSA_ENABLED MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_PSK_ENABLED +#define POLARSSL_KEY_EXCHANGE_PSK_ENABLED MBEDTLS_KEY_EXCHANGE_PSK_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_RSA_ENABLED +#define POLARSSL_KEY_EXCHANGE_RSA_ENABLED MBEDTLS_KEY_EXCHANGE_RSA_ENABLED +#endif +#if defined MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED +#define POLARSSL_KEY_EXCHANGE_RSA_PSK_ENABLED MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED +#endif +#if defined MBEDTLS_MD2_ALT +#define POLARSSL_MD2_ALT MBEDTLS_MD2_ALT +#endif +#if defined MBEDTLS_MD2_C +#define POLARSSL_MD2_C MBEDTLS_MD2_C +#endif +#if defined MBEDTLS_MD2_PROCESS_ALT +#define POLARSSL_MD2_PROCESS_ALT MBEDTLS_MD2_PROCESS_ALT +#endif +#if defined MBEDTLS_MD4_ALT +#define POLARSSL_MD4_ALT MBEDTLS_MD4_ALT +#endif +#if defined MBEDTLS_MD4_C +#define POLARSSL_MD4_C MBEDTLS_MD4_C +#endif +#if defined MBEDTLS_MD4_PROCESS_ALT +#define POLARSSL_MD4_PROCESS_ALT MBEDTLS_MD4_PROCESS_ALT +#endif +#if defined MBEDTLS_MD5_ALT +#define POLARSSL_MD5_ALT MBEDTLS_MD5_ALT +#endif +#if defined MBEDTLS_MD5_C +#define POLARSSL_MD5_C MBEDTLS_MD5_C +#endif +#if defined MBEDTLS_MD5_PROCESS_ALT +#define POLARSSL_MD5_PROCESS_ALT MBEDTLS_MD5_PROCESS_ALT +#endif +#if defined MBEDTLS_MD_C +#define POLARSSL_MD_C MBEDTLS_MD_C +#endif +#if defined MBEDTLS_MEMORY_ALIGN_MULTIPLE +#define POLARSSL_MEMORY_ALIGN_MULTIPLE MBEDTLS_MEMORY_ALIGN_MULTIPLE +#endif +#if defined MBEDTLS_MEMORY_BACKTRACE +#define POLARSSL_MEMORY_BACKTRACE MBEDTLS_MEMORY_BACKTRACE +#endif +#if defined MBEDTLS_MEMORY_BUFFER_ALLOC_C +#define POLARSSL_MEMORY_BUFFER_ALLOC_C MBEDTLS_MEMORY_BUFFER_ALLOC_C +#endif +#if defined MBEDTLS_MEMORY_DEBUG +#define POLARSSL_MEMORY_DEBUG MBEDTLS_MEMORY_DEBUG +#endif +#if defined MBEDTLS_MPI_MAX_SIZE +#define POLARSSL_MPI_MAX_SIZE MBEDTLS_MPI_MAX_SIZE +#endif +#if defined MBEDTLS_MPI_WINDOW_SIZE +#define POLARSSL_MPI_WINDOW_SIZE MBEDTLS_MPI_WINDOW_SIZE +#endif +#if defined MBEDTLS_NET_C +#define POLARSSL_NET_C MBEDTLS_NET_C +#endif +#if defined MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES +#define POLARSSL_NO_DEFAULT_ENTROPY_SOURCES MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES +#endif +#if defined MBEDTLS_NO_PLATFORM_ENTROPY +#define POLARSSL_NO_PLATFORM_ENTROPY MBEDTLS_NO_PLATFORM_ENTROPY +#endif +#if defined MBEDTLS_OID_C +#define POLARSSL_OID_C MBEDTLS_OID_C +#endif +#if defined MBEDTLS_PADLOCK_C +#define POLARSSL_PADLOCK_C MBEDTLS_PADLOCK_C +#endif +#if defined MBEDTLS_PEM_PARSE_C +#define POLARSSL_PEM_PARSE_C MBEDTLS_PEM_PARSE_C +#endif +#if defined MBEDTLS_PEM_WRITE_C +#define POLARSSL_PEM_WRITE_C MBEDTLS_PEM_WRITE_C +#endif +#if defined MBEDTLS_PKCS11_C +#define POLARSSL_PKCS11_C MBEDTLS_PKCS11_C +#endif +#if defined MBEDTLS_PKCS12_C +#define POLARSSL_PKCS12_C MBEDTLS_PKCS12_C +#endif +#if defined MBEDTLS_PKCS1_V15 +#define POLARSSL_PKCS1_V15 MBEDTLS_PKCS1_V15 +#endif +#if defined MBEDTLS_PKCS1_V21 +#define POLARSSL_PKCS1_V21 MBEDTLS_PKCS1_V21 +#endif +#if defined MBEDTLS_PKCS5_C +#define POLARSSL_PKCS5_C MBEDTLS_PKCS5_C +#endif +#if defined MBEDTLS_PK_C +#define POLARSSL_PK_C MBEDTLS_PK_C +#endif +#if defined MBEDTLS_PK_PARSE_C +#define POLARSSL_PK_PARSE_C MBEDTLS_PK_PARSE_C +#endif +#if defined MBEDTLS_PK_PARSE_EC_EXTENDED +#define POLARSSL_PK_PARSE_EC_EXTENDED MBEDTLS_PK_PARSE_EC_EXTENDED +#endif +#if defined MBEDTLS_PK_RSA_ALT_SUPPORT +#define POLARSSL_PK_RSA_ALT_SUPPORT MBEDTLS_PK_RSA_ALT_SUPPORT +#endif +#if defined MBEDTLS_PK_WRITE_C +#define POLARSSL_PK_WRITE_C MBEDTLS_PK_WRITE_C +#endif +#if defined MBEDTLS_PLATFORM_C +#define POLARSSL_PLATFORM_C MBEDTLS_PLATFORM_C +#endif +#if defined MBEDTLS_PLATFORM_EXIT_ALT +#define POLARSSL_PLATFORM_EXIT_ALT MBEDTLS_PLATFORM_EXIT_ALT +#endif +#if defined MBEDTLS_PLATFORM_EXIT_MACRO +#define POLARSSL_PLATFORM_EXIT_MACRO MBEDTLS_PLATFORM_EXIT_MACRO +#endif +#if defined MBEDTLS_PLATFORM_FPRINTF_ALT +#define POLARSSL_PLATFORM_FPRINTF_ALT MBEDTLS_PLATFORM_FPRINTF_ALT +#endif +#if defined MBEDTLS_PLATFORM_FPRINTF_MACRO +#define POLARSSL_PLATFORM_FPRINTF_MACRO MBEDTLS_PLATFORM_FPRINTF_MACRO +#endif +#if defined MBEDTLS_PLATFORM_FREE_MACRO +#define POLARSSL_PLATFORM_FREE_MACRO MBEDTLS_PLATFORM_FREE_MACRO +#endif +#if defined MBEDTLS_PLATFORM_MEMORY +#define POLARSSL_PLATFORM_MEMORY MBEDTLS_PLATFORM_MEMORY +#endif +#if defined MBEDTLS_PLATFORM_NO_STD_FUNCTIONS +#define POLARSSL_PLATFORM_NO_STD_FUNCTIONS MBEDTLS_PLATFORM_NO_STD_FUNCTIONS +#endif +#if defined MBEDTLS_PLATFORM_PRINTF_ALT +#define POLARSSL_PLATFORM_PRINTF_ALT MBEDTLS_PLATFORM_PRINTF_ALT +#endif +#if defined MBEDTLS_PLATFORM_PRINTF_MACRO +#define POLARSSL_PLATFORM_PRINTF_MACRO MBEDTLS_PLATFORM_PRINTF_MACRO +#endif +#if defined MBEDTLS_PLATFORM_SNPRINTF_ALT +#define POLARSSL_PLATFORM_SNPRINTF_ALT MBEDTLS_PLATFORM_SNPRINTF_ALT +#endif +#if defined MBEDTLS_PLATFORM_SNPRINTF_MACRO +#define POLARSSL_PLATFORM_SNPRINTF_MACRO MBEDTLS_PLATFORM_SNPRINTF_MACRO +#endif +#if defined MBEDTLS_PLATFORM_STD_EXIT +#define POLARSSL_PLATFORM_STD_EXIT MBEDTLS_PLATFORM_STD_EXIT +#endif +#if defined MBEDTLS_PLATFORM_STD_FPRINTF +#define POLARSSL_PLATFORM_STD_FPRINTF MBEDTLS_PLATFORM_STD_FPRINTF +#endif +#if defined MBEDTLS_PLATFORM_STD_FREE +#define POLARSSL_PLATFORM_STD_FREE MBEDTLS_PLATFORM_STD_FREE +#endif +#if defined MBEDTLS_PLATFORM_STD_MEM_HDR +#define POLARSSL_PLATFORM_STD_MEM_HDR MBEDTLS_PLATFORM_STD_MEM_HDR +#endif +#if defined MBEDTLS_PLATFORM_STD_PRINTF +#define POLARSSL_PLATFORM_STD_PRINTF MBEDTLS_PLATFORM_STD_PRINTF +#endif +#if defined MBEDTLS_PLATFORM_STD_SNPRINTF +#define POLARSSL_PLATFORM_STD_SNPRINTF MBEDTLS_PLATFORM_STD_SNPRINTF +#endif +#if defined MBEDTLS_PSK_MAX_LEN +#define POLARSSL_PSK_MAX_LEN MBEDTLS_PSK_MAX_LEN +#endif +#if defined MBEDTLS_REMOVE_ARC4_CIPHERSUITES +#define POLARSSL_REMOVE_ARC4_CIPHERSUITES MBEDTLS_REMOVE_ARC4_CIPHERSUITES +#endif +#if defined MBEDTLS_RIPEMD160_ALT +#define POLARSSL_RIPEMD160_ALT MBEDTLS_RIPEMD160_ALT +#endif +#if defined MBEDTLS_RIPEMD160_C +#define POLARSSL_RIPEMD160_C MBEDTLS_RIPEMD160_C +#endif +#if defined MBEDTLS_RIPEMD160_PROCESS_ALT +#define POLARSSL_RIPEMD160_PROCESS_ALT MBEDTLS_RIPEMD160_PROCESS_ALT +#endif +#if defined MBEDTLS_RSA_C +#define POLARSSL_RSA_C MBEDTLS_RSA_C +#endif +#if defined MBEDTLS_RSA_NO_CRT +#define POLARSSL_RSA_NO_CRT MBEDTLS_RSA_NO_CRT +#endif +#if defined MBEDTLS_SELF_TEST +#define POLARSSL_SELF_TEST MBEDTLS_SELF_TEST +#endif +#if defined MBEDTLS_SHA1_ALT +#define POLARSSL_SHA1_ALT MBEDTLS_SHA1_ALT +#endif +#if defined MBEDTLS_SHA1_C +#define POLARSSL_SHA1_C MBEDTLS_SHA1_C +#endif +#if defined MBEDTLS_SHA1_PROCESS_ALT +#define POLARSSL_SHA1_PROCESS_ALT MBEDTLS_SHA1_PROCESS_ALT +#endif +#if defined MBEDTLS_SHA256_ALT +#define POLARSSL_SHA256_ALT MBEDTLS_SHA256_ALT +#endif +#if defined MBEDTLS_SHA256_C +#define POLARSSL_SHA256_C MBEDTLS_SHA256_C +#endif +#if defined MBEDTLS_SHA256_PROCESS_ALT +#define POLARSSL_SHA256_PROCESS_ALT MBEDTLS_SHA256_PROCESS_ALT +#endif +#if defined MBEDTLS_SHA512_ALT +#define POLARSSL_SHA512_ALT MBEDTLS_SHA512_ALT +#endif +#if defined MBEDTLS_SHA512_C +#define POLARSSL_SHA512_C MBEDTLS_SHA512_C +#endif +#if defined MBEDTLS_SHA512_PROCESS_ALT +#define POLARSSL_SHA512_PROCESS_ALT MBEDTLS_SHA512_PROCESS_ALT +#endif +#if defined MBEDTLS_SSL_ALL_ALERT_MESSAGES +#define POLARSSL_SSL_ALL_ALERT_MESSAGES MBEDTLS_SSL_ALL_ALERT_MESSAGES +#endif +#if defined MBEDTLS_SSL_ALPN +#define POLARSSL_SSL_ALPN MBEDTLS_SSL_ALPN +#endif +#if defined MBEDTLS_SSL_CACHE_C +#define POLARSSL_SSL_CACHE_C MBEDTLS_SSL_CACHE_C +#endif +#if defined MBEDTLS_SSL_CBC_RECORD_SPLITTING +#define POLARSSL_SSL_CBC_RECORD_SPLITTING MBEDTLS_SSL_CBC_RECORD_SPLITTING +#endif +#if defined MBEDTLS_SSL_CLI_C +#define POLARSSL_SSL_CLI_C MBEDTLS_SSL_CLI_C +#endif +#if defined MBEDTLS_SSL_COOKIE_C +#define POLARSSL_SSL_COOKIE_C MBEDTLS_SSL_COOKIE_C +#endif +#if defined MBEDTLS_SSL_COOKIE_TIMEOUT +#define POLARSSL_SSL_COOKIE_TIMEOUT MBEDTLS_SSL_COOKIE_TIMEOUT +#endif +#if defined MBEDTLS_SSL_DEBUG_ALL +#define POLARSSL_SSL_DEBUG_ALL MBEDTLS_SSL_DEBUG_ALL +#endif +#if defined MBEDTLS_SSL_DTLS_ANTI_REPLAY +#define POLARSSL_SSL_DTLS_ANTI_REPLAY MBEDTLS_SSL_DTLS_ANTI_REPLAY +#endif +#if defined MBEDTLS_SSL_DTLS_BADMAC_LIMIT +#define POLARSSL_SSL_DTLS_BADMAC_LIMIT MBEDTLS_SSL_DTLS_BADMAC_LIMIT +#endif +#if defined MBEDTLS_SSL_DTLS_HELLO_VERIFY +#define POLARSSL_SSL_DTLS_HELLO_VERIFY MBEDTLS_SSL_DTLS_HELLO_VERIFY +#endif +#if defined MBEDTLS_SSL_ENCRYPT_THEN_MAC +#define POLARSSL_SSL_ENCRYPT_THEN_MAC MBEDTLS_SSL_ENCRYPT_THEN_MAC +#endif +#if defined MBEDTLS_SSL_EXTENDED_MASTER_SECRET +#define POLARSSL_SSL_EXTENDED_MASTER_SECRET MBEDTLS_SSL_EXTENDED_MASTER_SECRET +#endif +#if defined MBEDTLS_SSL_FALLBACK_SCSV +#define POLARSSL_SSL_FALLBACK_SCSV MBEDTLS_SSL_FALLBACK_SCSV +#endif +#if defined MBEDTLS_SSL_HW_RECORD_ACCEL +#define POLARSSL_SSL_HW_RECORD_ACCEL MBEDTLS_SSL_HW_RECORD_ACCEL +#endif +#if defined MBEDTLS_SSL_MAX_FRAGMENT_LENGTH +#define POLARSSL_SSL_MAX_FRAGMENT_LENGTH MBEDTLS_SSL_MAX_FRAGMENT_LENGTH +#endif +#if defined MBEDTLS_SSL_PROTO_DTLS +#define POLARSSL_SSL_PROTO_DTLS MBEDTLS_SSL_PROTO_DTLS +#endif +#if defined MBEDTLS_SSL_PROTO_SSL3 +#define POLARSSL_SSL_PROTO_SSL3 MBEDTLS_SSL_PROTO_SSL3 +#endif +#if defined MBEDTLS_SSL_PROTO_TLS1 +#define POLARSSL_SSL_PROTO_TLS1 MBEDTLS_SSL_PROTO_TLS1 +#endif +#if defined MBEDTLS_SSL_PROTO_TLS1_1 +#define POLARSSL_SSL_PROTO_TLS1_1 MBEDTLS_SSL_PROTO_TLS1_1 +#endif +#if defined MBEDTLS_SSL_PROTO_TLS1_2 +#define POLARSSL_SSL_PROTO_TLS1_2 MBEDTLS_SSL_PROTO_TLS1_2 +#endif +#if defined MBEDTLS_SSL_RENEGOTIATION +#define POLARSSL_SSL_RENEGOTIATION MBEDTLS_SSL_RENEGOTIATION +#endif +#if defined MBEDTLS_SSL_SERVER_NAME_INDICATION +#define POLARSSL_SSL_SERVER_NAME_INDICATION MBEDTLS_SSL_SERVER_NAME_INDICATION +#endif +#if defined MBEDTLS_SSL_SESSION_TICKETS +#define POLARSSL_SSL_SESSION_TICKETS MBEDTLS_SSL_SESSION_TICKETS +#endif +#if defined MBEDTLS_SSL_SRV_C +#define POLARSSL_SSL_SRV_C MBEDTLS_SSL_SRV_C +#endif +#if defined MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE +#define POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE +#endif +#if defined MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO +#define POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO +#endif +#if defined MBEDTLS_SSL_TLS_C +#define POLARSSL_SSL_TLS_C MBEDTLS_SSL_TLS_C +#endif +#if defined MBEDTLS_SSL_TRUNCATED_HMAC +#define POLARSSL_SSL_TRUNCATED_HMAC MBEDTLS_SSL_TRUNCATED_HMAC +#endif +#if defined MBEDTLS_THREADING_ALT +#define POLARSSL_THREADING_ALT MBEDTLS_THREADING_ALT +#endif +#if defined MBEDTLS_THREADING_C +#define POLARSSL_THREADING_C MBEDTLS_THREADING_C +#endif +#if defined MBEDTLS_THREADING_PTHREAD +#define POLARSSL_THREADING_PTHREAD MBEDTLS_THREADING_PTHREAD +#endif +#if defined MBEDTLS_TIMING_ALT +#define POLARSSL_TIMING_ALT MBEDTLS_TIMING_ALT +#endif +#if defined MBEDTLS_TIMING_C +#define POLARSSL_TIMING_C MBEDTLS_TIMING_C +#endif +#if defined MBEDTLS_VERSION_C +#define POLARSSL_VERSION_C MBEDTLS_VERSION_C +#endif +#if defined MBEDTLS_VERSION_FEATURES +#define POLARSSL_VERSION_FEATURES MBEDTLS_VERSION_FEATURES +#endif +#if defined MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 +#define POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3 MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 +#endif +#if defined MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION +#define POLARSSL_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION +#endif +#if defined MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE +#define POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE +#endif +#if defined MBEDTLS_X509_CHECK_KEY_USAGE +#define POLARSSL_X509_CHECK_KEY_USAGE MBEDTLS_X509_CHECK_KEY_USAGE +#endif +#if defined MBEDTLS_X509_CREATE_C +#define POLARSSL_X509_CREATE_C MBEDTLS_X509_CREATE_C +#endif +#if defined MBEDTLS_X509_CRL_PARSE_C +#define POLARSSL_X509_CRL_PARSE_C MBEDTLS_X509_CRL_PARSE_C +#endif +#if defined MBEDTLS_X509_CRT_PARSE_C +#define POLARSSL_X509_CRT_PARSE_C MBEDTLS_X509_CRT_PARSE_C +#endif +#if defined MBEDTLS_X509_CRT_WRITE_C +#define POLARSSL_X509_CRT_WRITE_C MBEDTLS_X509_CRT_WRITE_C +#endif +#if defined MBEDTLS_X509_CSR_PARSE_C +#define POLARSSL_X509_CSR_PARSE_C MBEDTLS_X509_CSR_PARSE_C +#endif +#if defined MBEDTLS_X509_CSR_WRITE_C +#define POLARSSL_X509_CSR_WRITE_C MBEDTLS_X509_CSR_WRITE_C +#endif +#if defined MBEDTLS_X509_MAX_INTERMEDIATE_CA +#define POLARSSL_X509_MAX_INTERMEDIATE_CA MBEDTLS_X509_MAX_INTERMEDIATE_CA +#endif +#if defined MBEDTLS_X509_RSASSA_PSS_SUPPORT +#define POLARSSL_X509_RSASSA_PSS_SUPPORT MBEDTLS_X509_RSASSA_PSS_SUPPORT +#endif +#if defined MBEDTLS_X509_USE_C +#define POLARSSL_X509_USE_C MBEDTLS_X509_USE_C +#endif +#if defined MBEDTLS_XTEA_ALT +#define POLARSSL_XTEA_ALT MBEDTLS_XTEA_ALT +#endif +#if defined MBEDTLS_XTEA_C +#define POLARSSL_XTEA_C MBEDTLS_XTEA_C +#endif +#if defined MBEDTLS_ZLIB_SUPPORT +#define POLARSSL_ZLIB_SUPPORT MBEDTLS_ZLIB_SUPPORT +#endif + +/* + * Misc names (macros, types, functions, enum constants...) + */ +#define AES_DECRYPT MBEDTLS_AES_DECRYPT +#define AES_ENCRYPT MBEDTLS_AES_ENCRYPT +#define ASN1_BIT_STRING MBEDTLS_ASN1_BIT_STRING +#define ASN1_BMP_STRING MBEDTLS_ASN1_BMP_STRING +#define ASN1_BOOLEAN MBEDTLS_ASN1_BOOLEAN +#define ASN1_CHK_ADD MBEDTLS_ASN1_CHK_ADD +#define ASN1_CONSTRUCTED MBEDTLS_ASN1_CONSTRUCTED +#define ASN1_CONTEXT_SPECIFIC MBEDTLS_ASN1_CONTEXT_SPECIFIC +#define ASN1_GENERALIZED_TIME MBEDTLS_ASN1_GENERALIZED_TIME +#define ASN1_IA5_STRING MBEDTLS_ASN1_IA5_STRING +#define ASN1_INTEGER MBEDTLS_ASN1_INTEGER +#define ASN1_NULL MBEDTLS_ASN1_NULL +#define ASN1_OCTET_STRING MBEDTLS_ASN1_OCTET_STRING +#define ASN1_OID MBEDTLS_ASN1_OID +#define ASN1_PRIMITIVE MBEDTLS_ASN1_PRIMITIVE +#define ASN1_PRINTABLE_STRING MBEDTLS_ASN1_PRINTABLE_STRING +#define ASN1_SEQUENCE MBEDTLS_ASN1_SEQUENCE +#define ASN1_SET MBEDTLS_ASN1_SET +#define ASN1_T61_STRING MBEDTLS_ASN1_T61_STRING +#define ASN1_UNIVERSAL_STRING MBEDTLS_ASN1_UNIVERSAL_STRING +#define ASN1_UTC_TIME MBEDTLS_ASN1_UTC_TIME +#define ASN1_UTF8_STRING MBEDTLS_ASN1_UTF8_STRING +#define BADCERT_CN_MISMATCH MBEDTLS_X509_BADCERT_CN_MISMATCH +#define BADCERT_EXPIRED MBEDTLS_X509_BADCERT_EXPIRED +#define BADCERT_FUTURE MBEDTLS_X509_BADCERT_FUTURE +#define BADCERT_MISSING MBEDTLS_X509_BADCERT_MISSING +#define BADCERT_NOT_TRUSTED MBEDTLS_X509_BADCERT_NOT_TRUSTED +#define BADCERT_OTHER MBEDTLS_X509_BADCERT_OTHER +#define BADCERT_REVOKED MBEDTLS_X509_BADCERT_REVOKED +#define BADCERT_SKIP_VERIFY MBEDTLS_X509_BADCERT_SKIP_VERIFY +#define BADCRL_EXPIRED MBEDTLS_X509_BADCRL_EXPIRED +#define BADCRL_FUTURE MBEDTLS_X509_BADCRL_FUTURE +#define BADCRL_NOT_TRUSTED MBEDTLS_X509_BADCRL_NOT_TRUSTED +#define BLOWFISH_BLOCKSIZE MBEDTLS_BLOWFISH_BLOCKSIZE +#define BLOWFISH_DECRYPT MBEDTLS_BLOWFISH_DECRYPT +#define BLOWFISH_ENCRYPT MBEDTLS_BLOWFISH_ENCRYPT +#define BLOWFISH_MAX_KEY MBEDTLS_BLOWFISH_MAX_KEY_BITS +#define BLOWFISH_MIN_KEY MBEDTLS_BLOWFISH_MIN_KEY_BITS +#define BLOWFISH_ROUNDS MBEDTLS_BLOWFISH_ROUNDS +#define CAMELLIA_DECRYPT MBEDTLS_CAMELLIA_DECRYPT +#define CAMELLIA_ENCRYPT MBEDTLS_CAMELLIA_ENCRYPT +#define COLLECT_SIZE MBEDTLS_HAVEGE_COLLECT_SIZE +#define CTR_DRBG_BLOCKSIZE MBEDTLS_CTR_DRBG_BLOCKSIZE +#define CTR_DRBG_ENTROPY_LEN MBEDTLS_CTR_DRBG_ENTROPY_LEN +#define CTR_DRBG_KEYBITS MBEDTLS_CTR_DRBG_KEYBITS +#define CTR_DRBG_KEYSIZE MBEDTLS_CTR_DRBG_KEYSIZE +#define CTR_DRBG_MAX_INPUT MBEDTLS_CTR_DRBG_MAX_INPUT +#define CTR_DRBG_MAX_REQUEST MBEDTLS_CTR_DRBG_MAX_REQUEST +#define CTR_DRBG_MAX_SEED_INPUT MBEDTLS_CTR_DRBG_MAX_SEED_INPUT +#define CTR_DRBG_PR_OFF MBEDTLS_CTR_DRBG_PR_OFF +#define CTR_DRBG_PR_ON MBEDTLS_CTR_DRBG_PR_ON +#define CTR_DRBG_RESEED_INTERVAL MBEDTLS_CTR_DRBG_RESEED_INTERVAL +#define CTR_DRBG_SEEDLEN MBEDTLS_CTR_DRBG_SEEDLEN +#define DEPRECATED MBEDTLS_DEPRECATED +#define DES_DECRYPT MBEDTLS_DES_DECRYPT +#define DES_ENCRYPT MBEDTLS_DES_ENCRYPT +#define DES_KEY_SIZE MBEDTLS_DES_KEY_SIZE +#define ENTROPY_BLOCK_SIZE MBEDTLS_ENTROPY_BLOCK_SIZE +#define ENTROPY_MAX_GATHER MBEDTLS_ENTROPY_MAX_GATHER +#define ENTROPY_MAX_SEED_SIZE MBEDTLS_ENTROPY_MAX_SEED_SIZE +#define ENTROPY_MAX_SOURCES MBEDTLS_ENTROPY_MAX_SOURCES +#define ENTROPY_MIN_HARDCLOCK MBEDTLS_ENTROPY_MIN_HARDCLOCK +#define ENTROPY_MIN_HAVEGE MBEDTLS_ENTROPY_MIN_HAVEGE +#define ENTROPY_MIN_PLATFORM MBEDTLS_ENTROPY_MIN_PLATFORM +#define ENTROPY_SOURCE_MANUAL MBEDTLS_ENTROPY_SOURCE_MANUAL +#define EXT_AUTHORITY_KEY_IDENTIFIER MBEDTLS_X509_EXT_AUTHORITY_KEY_IDENTIFIER +#define EXT_BASIC_CONSTRAINTS MBEDTLS_X509_EXT_BASIC_CONSTRAINTS +#define EXT_CERTIFICATE_POLICIES MBEDTLS_X509_EXT_CERTIFICATE_POLICIES +#define EXT_CRL_DISTRIBUTION_POINTS MBEDTLS_X509_EXT_CRL_DISTRIBUTION_POINTS +#define EXT_EXTENDED_KEY_USAGE MBEDTLS_X509_EXT_EXTENDED_KEY_USAGE +#define EXT_FRESHEST_CRL MBEDTLS_X509_EXT_FRESHEST_CRL +#define EXT_INIHIBIT_ANYPOLICY MBEDTLS_X509_EXT_INIHIBIT_ANYPOLICY +#define EXT_ISSUER_ALT_NAME MBEDTLS_X509_EXT_ISSUER_ALT_NAME +#define EXT_KEY_USAGE MBEDTLS_X509_EXT_KEY_USAGE +#define EXT_NAME_CONSTRAINTS MBEDTLS_X509_EXT_NAME_CONSTRAINTS +#define EXT_NS_CERT_TYPE MBEDTLS_X509_EXT_NS_CERT_TYPE +#define EXT_POLICY_CONSTRAINTS MBEDTLS_X509_EXT_POLICY_CONSTRAINTS +#define EXT_POLICY_MAPPINGS MBEDTLS_X509_EXT_POLICY_MAPPINGS +#define EXT_SUBJECT_ALT_NAME MBEDTLS_X509_EXT_SUBJECT_ALT_NAME +#define EXT_SUBJECT_DIRECTORY_ATTRS MBEDTLS_X509_EXT_SUBJECT_DIRECTORY_ATTRS +#define EXT_SUBJECT_KEY_IDENTIFIER MBEDTLS_X509_EXT_SUBJECT_KEY_IDENTIFIER +#define GCM_DECRYPT MBEDTLS_GCM_DECRYPT +#define GCM_ENCRYPT MBEDTLS_GCM_ENCRYPT +#define KU_CRL_SIGN MBEDTLS_X509_KU_CRL_SIGN +#define KU_DATA_ENCIPHERMENT MBEDTLS_X509_KU_DATA_ENCIPHERMENT +#define KU_DIGITAL_SIGNATURE MBEDTLS_X509_KU_DIGITAL_SIGNATURE +#define KU_KEY_AGREEMENT MBEDTLS_X509_KU_KEY_AGREEMENT +#define KU_KEY_CERT_SIGN MBEDTLS_X509_KU_KEY_CERT_SIGN +#define KU_KEY_ENCIPHERMENT MBEDTLS_X509_KU_KEY_ENCIPHERMENT +#define KU_NON_REPUDIATION MBEDTLS_X509_KU_NON_REPUDIATION +#define LN_2_DIV_LN_10_SCALE100 MBEDTLS_LN_2_DIV_LN_10_SCALE100 +#define MEMORY_VERIFY_ALLOC MBEDTLS_MEMORY_VERIFY_ALLOC +#define MEMORY_VERIFY_ALWAYS MBEDTLS_MEMORY_VERIFY_ALWAYS +#define MEMORY_VERIFY_FREE MBEDTLS_MEMORY_VERIFY_FREE +#define MEMORY_VERIFY_NONE MBEDTLS_MEMORY_VERIFY_NONE +#define MPI_CHK MBEDTLS_MPI_CHK +#define NET_PROTO_TCP MBEDTLS_NET_PROTO_TCP +#define NET_PROTO_UDP MBEDTLS_NET_PROTO_UDP +#define NS_CERT_TYPE_EMAIL MBEDTLS_X509_NS_CERT_TYPE_EMAIL +#define NS_CERT_TYPE_EMAIL_CA MBEDTLS_X509_NS_CERT_TYPE_EMAIL_CA +#define NS_CERT_TYPE_OBJECT_SIGNING MBEDTLS_X509_NS_CERT_TYPE_OBJECT_SIGNING +#define NS_CERT_TYPE_OBJECT_SIGNING_CA MBEDTLS_X509_NS_CERT_TYPE_OBJECT_SIGNING_CA +#define NS_CERT_TYPE_RESERVED MBEDTLS_X509_NS_CERT_TYPE_RESERVED +#define NS_CERT_TYPE_SSL_CA MBEDTLS_X509_NS_CERT_TYPE_SSL_CA +#define NS_CERT_TYPE_SSL_CLIENT MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT +#define NS_CERT_TYPE_SSL_SERVER MBEDTLS_X509_NS_CERT_TYPE_SSL_SERVER +#define OID_ANSI_X9_62 MBEDTLS_OID_ANSI_X9_62 +#define OID_ANSI_X9_62_FIELD_TYPE MBEDTLS_OID_ANSI_X9_62_FIELD_TYPE +#define OID_ANSI_X9_62_PRIME_FIELD MBEDTLS_OID_ANSI_X9_62_PRIME_FIELD +#define OID_ANSI_X9_62_SIG MBEDTLS_OID_ANSI_X9_62_SIG +#define OID_ANSI_X9_62_SIG_SHA2 MBEDTLS_OID_ANSI_X9_62_SIG_SHA2 +#define OID_ANY_EXTENDED_KEY_USAGE MBEDTLS_OID_ANY_EXTENDED_KEY_USAGE +#define OID_AT MBEDTLS_OID_AT +#define OID_AT_CN MBEDTLS_OID_AT_CN +#define OID_AT_COUNTRY MBEDTLS_OID_AT_COUNTRY +#define OID_AT_DN_QUALIFIER MBEDTLS_OID_AT_DN_QUALIFIER +#define OID_AT_GENERATION_QUALIFIER MBEDTLS_OID_AT_GENERATION_QUALIFIER +#define OID_AT_GIVEN_NAME MBEDTLS_OID_AT_GIVEN_NAME +#define OID_AT_INITIALS MBEDTLS_OID_AT_INITIALS +#define OID_AT_LOCALITY MBEDTLS_OID_AT_LOCALITY +#define OID_AT_ORGANIZATION MBEDTLS_OID_AT_ORGANIZATION +#define OID_AT_ORG_UNIT MBEDTLS_OID_AT_ORG_UNIT +#define OID_AT_POSTAL_ADDRESS MBEDTLS_OID_AT_POSTAL_ADDRESS +#define OID_AT_POSTAL_CODE MBEDTLS_OID_AT_POSTAL_CODE +#define OID_AT_PSEUDONYM MBEDTLS_OID_AT_PSEUDONYM +#define OID_AT_SERIAL_NUMBER MBEDTLS_OID_AT_SERIAL_NUMBER +#define OID_AT_STATE MBEDTLS_OID_AT_STATE +#define OID_AT_SUR_NAME MBEDTLS_OID_AT_SUR_NAME +#define OID_AT_TITLE MBEDTLS_OID_AT_TITLE +#define OID_AT_UNIQUE_IDENTIFIER MBEDTLS_OID_AT_UNIQUE_IDENTIFIER +#define OID_AUTHORITY_KEY_IDENTIFIER MBEDTLS_OID_AUTHORITY_KEY_IDENTIFIER +#define OID_BASIC_CONSTRAINTS MBEDTLS_OID_BASIC_CONSTRAINTS +#define OID_CERTICOM MBEDTLS_OID_CERTICOM +#define OID_CERTIFICATE_POLICIES MBEDTLS_OID_CERTIFICATE_POLICIES +#define OID_CLIENT_AUTH MBEDTLS_OID_CLIENT_AUTH +#define OID_CMP MBEDTLS_OID_CMP +#define OID_CODE_SIGNING MBEDTLS_OID_CODE_SIGNING +#define OID_COUNTRY_US MBEDTLS_OID_COUNTRY_US +#define OID_CRL_DISTRIBUTION_POINTS MBEDTLS_OID_CRL_DISTRIBUTION_POINTS +#define OID_CRL_NUMBER MBEDTLS_OID_CRL_NUMBER +#define OID_DES_CBC MBEDTLS_OID_DES_CBC +#define OID_DES_EDE3_CBC MBEDTLS_OID_DES_EDE3_CBC +#define OID_DIGEST_ALG_MD2 MBEDTLS_OID_DIGEST_ALG_MD2 +#define OID_DIGEST_ALG_MD4 MBEDTLS_OID_DIGEST_ALG_MD4 +#define OID_DIGEST_ALG_MD5 MBEDTLS_OID_DIGEST_ALG_MD5 +#define OID_DIGEST_ALG_SHA1 MBEDTLS_OID_DIGEST_ALG_SHA1 +#define OID_DIGEST_ALG_SHA224 MBEDTLS_OID_DIGEST_ALG_SHA224 +#define OID_DIGEST_ALG_SHA256 MBEDTLS_OID_DIGEST_ALG_SHA256 +#define OID_DIGEST_ALG_SHA384 MBEDTLS_OID_DIGEST_ALG_SHA384 +#define OID_DIGEST_ALG_SHA512 MBEDTLS_OID_DIGEST_ALG_SHA512 +#define OID_DOMAIN_COMPONENT MBEDTLS_OID_DOMAIN_COMPONENT +#define OID_ECDSA_SHA1 MBEDTLS_OID_ECDSA_SHA1 +#define OID_ECDSA_SHA224 MBEDTLS_OID_ECDSA_SHA224 +#define OID_ECDSA_SHA256 MBEDTLS_OID_ECDSA_SHA256 +#define OID_ECDSA_SHA384 MBEDTLS_OID_ECDSA_SHA384 +#define OID_ECDSA_SHA512 MBEDTLS_OID_ECDSA_SHA512 +#define OID_EC_ALG_ECDH MBEDTLS_OID_EC_ALG_ECDH +#define OID_EC_ALG_UNRESTRICTED MBEDTLS_OID_EC_ALG_UNRESTRICTED +#define OID_EC_BRAINPOOL_V1 MBEDTLS_OID_EC_BRAINPOOL_V1 +#define OID_EC_GRP_BP256R1 MBEDTLS_OID_EC_GRP_BP256R1 +#define OID_EC_GRP_BP384R1 MBEDTLS_OID_EC_GRP_BP384R1 +#define OID_EC_GRP_BP512R1 MBEDTLS_OID_EC_GRP_BP512R1 +#define OID_EC_GRP_SECP192K1 MBEDTLS_OID_EC_GRP_SECP192K1 +#define OID_EC_GRP_SECP192R1 MBEDTLS_OID_EC_GRP_SECP192R1 +#define OID_EC_GRP_SECP224K1 MBEDTLS_OID_EC_GRP_SECP224K1 +#define OID_EC_GRP_SECP224R1 MBEDTLS_OID_EC_GRP_SECP224R1 +#define OID_EC_GRP_SECP256K1 MBEDTLS_OID_EC_GRP_SECP256K1 +#define OID_EC_GRP_SECP256R1 MBEDTLS_OID_EC_GRP_SECP256R1 +#define OID_EC_GRP_SECP384R1 MBEDTLS_OID_EC_GRP_SECP384R1 +#define OID_EC_GRP_SECP521R1 MBEDTLS_OID_EC_GRP_SECP521R1 +#define OID_EMAIL_PROTECTION MBEDTLS_OID_EMAIL_PROTECTION +#define OID_EXTENDED_KEY_USAGE MBEDTLS_OID_EXTENDED_KEY_USAGE +#define OID_FRESHEST_CRL MBEDTLS_OID_FRESHEST_CRL +#define OID_GOV MBEDTLS_OID_GOV +#define OID_HMAC_SHA1 MBEDTLS_OID_HMAC_SHA1 +#define OID_ID_CE MBEDTLS_OID_ID_CE +#define OID_INIHIBIT_ANYPOLICY MBEDTLS_OID_INIHIBIT_ANYPOLICY +#define OID_ISO_CCITT_DS MBEDTLS_OID_ISO_CCITT_DS +#define OID_ISO_IDENTIFIED_ORG MBEDTLS_OID_ISO_IDENTIFIED_ORG +#define OID_ISO_ITU_COUNTRY MBEDTLS_OID_ISO_ITU_COUNTRY +#define OID_ISO_ITU_US_ORG MBEDTLS_OID_ISO_ITU_US_ORG +#define OID_ISO_MEMBER_BODIES MBEDTLS_OID_ISO_MEMBER_BODIES +#define OID_ISSUER_ALT_NAME MBEDTLS_OID_ISSUER_ALT_NAME +#define OID_KEY_USAGE MBEDTLS_OID_KEY_USAGE +#define OID_KP MBEDTLS_OID_KP +#define OID_MGF1 MBEDTLS_OID_MGF1 +#define OID_NAME_CONSTRAINTS MBEDTLS_OID_NAME_CONSTRAINTS +#define OID_NETSCAPE MBEDTLS_OID_NETSCAPE +#define OID_NS_BASE_URL MBEDTLS_OID_NS_BASE_URL +#define OID_NS_CA_POLICY_URL MBEDTLS_OID_NS_CA_POLICY_URL +#define OID_NS_CA_REVOCATION_URL MBEDTLS_OID_NS_CA_REVOCATION_URL +#define OID_NS_CERT MBEDTLS_OID_NS_CERT +#define OID_NS_CERT_SEQUENCE MBEDTLS_OID_NS_CERT_SEQUENCE +#define OID_NS_CERT_TYPE MBEDTLS_OID_NS_CERT_TYPE +#define OID_NS_COMMENT MBEDTLS_OID_NS_COMMENT +#define OID_NS_DATA_TYPE MBEDTLS_OID_NS_DATA_TYPE +#define OID_NS_RENEWAL_URL MBEDTLS_OID_NS_RENEWAL_URL +#define OID_NS_REVOCATION_URL MBEDTLS_OID_NS_REVOCATION_URL +#define OID_NS_SSL_SERVER_NAME MBEDTLS_OID_NS_SSL_SERVER_NAME +#define OID_OCSP_SIGNING MBEDTLS_OID_OCSP_SIGNING +#define OID_OIW_SECSIG MBEDTLS_OID_OIW_SECSIG +#define OID_OIW_SECSIG_ALG MBEDTLS_OID_OIW_SECSIG_ALG +#define OID_OIW_SECSIG_SHA1 MBEDTLS_OID_OIW_SECSIG_SHA1 +#define OID_ORGANIZATION MBEDTLS_OID_ORGANIZATION +#define OID_ORG_ANSI_X9_62 MBEDTLS_OID_ORG_ANSI_X9_62 +#define OID_ORG_CERTICOM MBEDTLS_OID_ORG_CERTICOM +#define OID_ORG_DOD MBEDTLS_OID_ORG_DOD +#define OID_ORG_GOV MBEDTLS_OID_ORG_GOV +#define OID_ORG_NETSCAPE MBEDTLS_OID_ORG_NETSCAPE +#define OID_ORG_OIW MBEDTLS_OID_ORG_OIW +#define OID_ORG_RSA_DATA_SECURITY MBEDTLS_OID_ORG_RSA_DATA_SECURITY +#define OID_ORG_TELETRUST MBEDTLS_OID_ORG_TELETRUST +#define OID_PKCS MBEDTLS_OID_PKCS +#define OID_PKCS1 MBEDTLS_OID_PKCS1 +#define OID_PKCS12 MBEDTLS_OID_PKCS12 +#define OID_PKCS12_PBE MBEDTLS_OID_PKCS12_PBE +#define OID_PKCS12_PBE_SHA1_DES2_EDE_CBC MBEDTLS_OID_PKCS12_PBE_SHA1_DES2_EDE_CBC +#define OID_PKCS12_PBE_SHA1_DES3_EDE_CBC MBEDTLS_OID_PKCS12_PBE_SHA1_DES3_EDE_CBC +#define OID_PKCS12_PBE_SHA1_RC2_128_CBC MBEDTLS_OID_PKCS12_PBE_SHA1_RC2_128_CBC +#define OID_PKCS12_PBE_SHA1_RC2_40_CBC MBEDTLS_OID_PKCS12_PBE_SHA1_RC2_40_CBC +#define OID_PKCS12_PBE_SHA1_RC4_128 MBEDTLS_OID_PKCS12_PBE_SHA1_RC4_128 +#define OID_PKCS12_PBE_SHA1_RC4_40 MBEDTLS_OID_PKCS12_PBE_SHA1_RC4_40 +#define OID_PKCS1_MD2 MBEDTLS_OID_PKCS1_MD2 +#define OID_PKCS1_MD4 MBEDTLS_OID_PKCS1_MD4 +#define OID_PKCS1_MD5 MBEDTLS_OID_PKCS1_MD5 +#define OID_PKCS1_RSA MBEDTLS_OID_PKCS1_RSA +#define OID_PKCS1_SHA1 MBEDTLS_OID_PKCS1_SHA1 +#define OID_PKCS1_SHA224 MBEDTLS_OID_PKCS1_SHA224 +#define OID_PKCS1_SHA256 MBEDTLS_OID_PKCS1_SHA256 +#define OID_PKCS1_SHA384 MBEDTLS_OID_PKCS1_SHA384 +#define OID_PKCS1_SHA512 MBEDTLS_OID_PKCS1_SHA512 +#define OID_PKCS5 MBEDTLS_OID_PKCS5 +#define OID_PKCS5_PBES2 MBEDTLS_OID_PKCS5_PBES2 +#define OID_PKCS5_PBE_MD2_DES_CBC MBEDTLS_OID_PKCS5_PBE_MD2_DES_CBC +#define OID_PKCS5_PBE_MD2_RC2_CBC MBEDTLS_OID_PKCS5_PBE_MD2_RC2_CBC +#define OID_PKCS5_PBE_MD5_DES_CBC MBEDTLS_OID_PKCS5_PBE_MD5_DES_CBC +#define OID_PKCS5_PBE_MD5_RC2_CBC MBEDTLS_OID_PKCS5_PBE_MD5_RC2_CBC +#define OID_PKCS5_PBE_SHA1_DES_CBC MBEDTLS_OID_PKCS5_PBE_SHA1_DES_CBC +#define OID_PKCS5_PBE_SHA1_RC2_CBC MBEDTLS_OID_PKCS5_PBE_SHA1_RC2_CBC +#define OID_PKCS5_PBKDF2 MBEDTLS_OID_PKCS5_PBKDF2 +#define OID_PKCS5_PBMAC1 MBEDTLS_OID_PKCS5_PBMAC1 +#define OID_PKCS9 MBEDTLS_OID_PKCS9 +#define OID_PKCS9_CSR_EXT_REQ MBEDTLS_OID_PKCS9_CSR_EXT_REQ +#define OID_PKCS9_EMAIL MBEDTLS_OID_PKCS9_EMAIL +#define OID_PKIX MBEDTLS_OID_PKIX +#define OID_POLICY_CONSTRAINTS MBEDTLS_OID_POLICY_CONSTRAINTS +#define OID_POLICY_MAPPINGS MBEDTLS_OID_POLICY_MAPPINGS +#define OID_PRIVATE_KEY_USAGE_PERIOD MBEDTLS_OID_PRIVATE_KEY_USAGE_PERIOD +#define OID_RSASSA_PSS MBEDTLS_OID_RSASSA_PSS +#define OID_RSA_COMPANY MBEDTLS_OID_RSA_COMPANY +#define OID_RSA_SHA_OBS MBEDTLS_OID_RSA_SHA_OBS +#define OID_SERVER_AUTH MBEDTLS_OID_SERVER_AUTH +#define OID_SIZE MBEDTLS_OID_SIZE +#define OID_SUBJECT_ALT_NAME MBEDTLS_OID_SUBJECT_ALT_NAME +#define OID_SUBJECT_DIRECTORY_ATTRS MBEDTLS_OID_SUBJECT_DIRECTORY_ATTRS +#define OID_SUBJECT_KEY_IDENTIFIER MBEDTLS_OID_SUBJECT_KEY_IDENTIFIER +#define OID_TELETRUST MBEDTLS_OID_TELETRUST +#define OID_TIME_STAMPING MBEDTLS_OID_TIME_STAMPING +#define PADLOCK_ACE MBEDTLS_PADLOCK_ACE +#define PADLOCK_ALIGN16 MBEDTLS_PADLOCK_ALIGN16 +#define PADLOCK_PHE MBEDTLS_PADLOCK_PHE +#define PADLOCK_PMM MBEDTLS_PADLOCK_PMM +#define PADLOCK_RNG MBEDTLS_PADLOCK_RNG +#define PKCS12_DERIVE_IV MBEDTLS_PKCS12_DERIVE_IV +#define PKCS12_DERIVE_KEY MBEDTLS_PKCS12_DERIVE_KEY +#define PKCS12_DERIVE_MAC_KEY MBEDTLS_PKCS12_DERIVE_MAC_KEY +#define PKCS12_PBE_DECRYPT MBEDTLS_PKCS12_PBE_DECRYPT +#define PKCS12_PBE_ENCRYPT MBEDTLS_PKCS12_PBE_ENCRYPT +#define PKCS5_DECRYPT MBEDTLS_PKCS5_DECRYPT +#define PKCS5_ENCRYPT MBEDTLS_PKCS5_ENCRYPT +#define POLARSSL_AESNI_AES MBEDTLS_AESNI_AES +#define POLARSSL_AESNI_CLMUL MBEDTLS_AESNI_CLMUL +#define POLARSSL_AESNI_H MBEDTLS_AESNI_H +#define POLARSSL_AES_H MBEDTLS_AES_H +#define POLARSSL_ARC4_H MBEDTLS_ARC4_H +#define POLARSSL_ASN1_H MBEDTLS_ASN1_H +#define POLARSSL_ASN1_WRITE_H MBEDTLS_ASN1_WRITE_H +#define POLARSSL_BASE64_H MBEDTLS_BASE64_H +#define POLARSSL_BIGNUM_H MBEDTLS_BIGNUM_H +#define POLARSSL_BLOWFISH_H MBEDTLS_BLOWFISH_H +#define POLARSSL_BN_MUL_H MBEDTLS_BN_MUL_H +#define POLARSSL_CAMELLIA_H MBEDTLS_CAMELLIA_H +#define POLARSSL_CCM_H MBEDTLS_CCM_H +#define POLARSSL_CERTS_H MBEDTLS_CERTS_H +#define POLARSSL_CHECK_CONFIG_H MBEDTLS_CHECK_CONFIG_H +#define POLARSSL_CIPHERSUITE_NODTLS MBEDTLS_CIPHERSUITE_NODTLS +#define POLARSSL_CIPHERSUITE_SHORT_TAG MBEDTLS_CIPHERSUITE_SHORT_TAG +#define POLARSSL_CIPHERSUITE_WEAK MBEDTLS_CIPHERSUITE_WEAK +#define POLARSSL_CIPHER_AES_128_CBC MBEDTLS_CIPHER_AES_128_CBC +#define POLARSSL_CIPHER_AES_128_CCM MBEDTLS_CIPHER_AES_128_CCM +#define POLARSSL_CIPHER_AES_128_CFB128 MBEDTLS_CIPHER_AES_128_CFB128 +#define POLARSSL_CIPHER_AES_128_CTR MBEDTLS_CIPHER_AES_128_CTR +#define POLARSSL_CIPHER_AES_128_ECB MBEDTLS_CIPHER_AES_128_ECB +#define POLARSSL_CIPHER_AES_128_GCM MBEDTLS_CIPHER_AES_128_GCM +#define POLARSSL_CIPHER_AES_192_CBC MBEDTLS_CIPHER_AES_192_CBC +#define POLARSSL_CIPHER_AES_192_CCM MBEDTLS_CIPHER_AES_192_CCM +#define POLARSSL_CIPHER_AES_192_CFB128 MBEDTLS_CIPHER_AES_192_CFB128 +#define POLARSSL_CIPHER_AES_192_CTR MBEDTLS_CIPHER_AES_192_CTR +#define POLARSSL_CIPHER_AES_192_ECB MBEDTLS_CIPHER_AES_192_ECB +#define POLARSSL_CIPHER_AES_192_GCM MBEDTLS_CIPHER_AES_192_GCM +#define POLARSSL_CIPHER_AES_256_CBC MBEDTLS_CIPHER_AES_256_CBC +#define POLARSSL_CIPHER_AES_256_CCM MBEDTLS_CIPHER_AES_256_CCM +#define POLARSSL_CIPHER_AES_256_CFB128 MBEDTLS_CIPHER_AES_256_CFB128 +#define POLARSSL_CIPHER_AES_256_CTR MBEDTLS_CIPHER_AES_256_CTR +#define POLARSSL_CIPHER_AES_256_ECB MBEDTLS_CIPHER_AES_256_ECB +#define POLARSSL_CIPHER_AES_256_GCM MBEDTLS_CIPHER_AES_256_GCM +#define POLARSSL_CIPHER_ARC4_128 MBEDTLS_CIPHER_ARC4_128 +#define POLARSSL_CIPHER_BLOWFISH_CBC MBEDTLS_CIPHER_BLOWFISH_CBC +#define POLARSSL_CIPHER_BLOWFISH_CFB64 MBEDTLS_CIPHER_BLOWFISH_CFB64 +#define POLARSSL_CIPHER_BLOWFISH_CTR MBEDTLS_CIPHER_BLOWFISH_CTR +#define POLARSSL_CIPHER_BLOWFISH_ECB MBEDTLS_CIPHER_BLOWFISH_ECB +#define POLARSSL_CIPHER_CAMELLIA_128_CBC MBEDTLS_CIPHER_CAMELLIA_128_CBC +#define POLARSSL_CIPHER_CAMELLIA_128_CCM MBEDTLS_CIPHER_CAMELLIA_128_CCM +#define POLARSSL_CIPHER_CAMELLIA_128_CFB128 MBEDTLS_CIPHER_CAMELLIA_128_CFB128 +#define POLARSSL_CIPHER_CAMELLIA_128_CTR MBEDTLS_CIPHER_CAMELLIA_128_CTR +#define POLARSSL_CIPHER_CAMELLIA_128_ECB MBEDTLS_CIPHER_CAMELLIA_128_ECB +#define POLARSSL_CIPHER_CAMELLIA_128_GCM MBEDTLS_CIPHER_CAMELLIA_128_GCM +#define POLARSSL_CIPHER_CAMELLIA_192_CBC MBEDTLS_CIPHER_CAMELLIA_192_CBC +#define POLARSSL_CIPHER_CAMELLIA_192_CCM MBEDTLS_CIPHER_CAMELLIA_192_CCM +#define POLARSSL_CIPHER_CAMELLIA_192_CFB128 MBEDTLS_CIPHER_CAMELLIA_192_CFB128 +#define POLARSSL_CIPHER_CAMELLIA_192_CTR MBEDTLS_CIPHER_CAMELLIA_192_CTR +#define POLARSSL_CIPHER_CAMELLIA_192_ECB MBEDTLS_CIPHER_CAMELLIA_192_ECB +#define POLARSSL_CIPHER_CAMELLIA_192_GCM MBEDTLS_CIPHER_CAMELLIA_192_GCM +#define POLARSSL_CIPHER_CAMELLIA_256_CBC MBEDTLS_CIPHER_CAMELLIA_256_CBC +#define POLARSSL_CIPHER_CAMELLIA_256_CCM MBEDTLS_CIPHER_CAMELLIA_256_CCM +#define POLARSSL_CIPHER_CAMELLIA_256_CFB128 MBEDTLS_CIPHER_CAMELLIA_256_CFB128 +#define POLARSSL_CIPHER_CAMELLIA_256_CTR MBEDTLS_CIPHER_CAMELLIA_256_CTR +#define POLARSSL_CIPHER_CAMELLIA_256_ECB MBEDTLS_CIPHER_CAMELLIA_256_ECB +#define POLARSSL_CIPHER_CAMELLIA_256_GCM MBEDTLS_CIPHER_CAMELLIA_256_GCM +#define POLARSSL_CIPHER_DES_CBC MBEDTLS_CIPHER_DES_CBC +#define POLARSSL_CIPHER_DES_ECB MBEDTLS_CIPHER_DES_ECB +#define POLARSSL_CIPHER_DES_EDE3_CBC MBEDTLS_CIPHER_DES_EDE3_CBC +#define POLARSSL_CIPHER_DES_EDE3_ECB MBEDTLS_CIPHER_DES_EDE3_ECB +#define POLARSSL_CIPHER_DES_EDE_CBC MBEDTLS_CIPHER_DES_EDE_CBC +#define POLARSSL_CIPHER_DES_EDE_ECB MBEDTLS_CIPHER_DES_EDE_ECB +#define POLARSSL_CIPHER_H MBEDTLS_CIPHER_H +#define POLARSSL_CIPHER_ID_3DES MBEDTLS_CIPHER_ID_3DES +#define POLARSSL_CIPHER_ID_AES MBEDTLS_CIPHER_ID_AES +#define POLARSSL_CIPHER_ID_ARC4 MBEDTLS_CIPHER_ID_ARC4 +#define POLARSSL_CIPHER_ID_BLOWFISH MBEDTLS_CIPHER_ID_BLOWFISH +#define POLARSSL_CIPHER_ID_CAMELLIA MBEDTLS_CIPHER_ID_CAMELLIA +#define POLARSSL_CIPHER_ID_DES MBEDTLS_CIPHER_ID_DES +#define POLARSSL_CIPHER_ID_NONE MBEDTLS_CIPHER_ID_NONE +#define POLARSSL_CIPHER_ID_NULL MBEDTLS_CIPHER_ID_NULL +#define POLARSSL_CIPHER_MODE_AEAD MBEDTLS_CIPHER_MODE_AEAD +#define POLARSSL_CIPHER_MODE_STREAM MBEDTLS_CIPHER_MODE_STREAM +#define POLARSSL_CIPHER_MODE_WITH_PADDING MBEDTLS_CIPHER_MODE_WITH_PADDING +#define POLARSSL_CIPHER_NONE MBEDTLS_CIPHER_NONE +#define POLARSSL_CIPHER_NULL MBEDTLS_CIPHER_NULL +#define POLARSSL_CIPHER_VARIABLE_IV_LEN MBEDTLS_CIPHER_VARIABLE_IV_LEN +#define POLARSSL_CIPHER_VARIABLE_KEY_LEN MBEDTLS_CIPHER_VARIABLE_KEY_LEN +#define POLARSSL_CIPHER_WRAP_H MBEDTLS_CIPHER_WRAP_H +#define POLARSSL_CONFIG_H MBEDTLS_CONFIG_H +#define POLARSSL_CTR_DRBG_H MBEDTLS_CTR_DRBG_H +#define POLARSSL_DEBUG_H MBEDTLS_DEBUG_H +#define POLARSSL_DECRYPT MBEDTLS_DECRYPT +#define POLARSSL_DES_H MBEDTLS_DES_H +#define POLARSSL_DHM_H MBEDTLS_DHM_H +#define POLARSSL_DHM_RFC3526_MODP_2048_G MBEDTLS_DHM_RFC3526_MODP_2048_G +#define POLARSSL_DHM_RFC3526_MODP_2048_P MBEDTLS_DHM_RFC3526_MODP_2048_P +#define POLARSSL_DHM_RFC3526_MODP_3072_G MBEDTLS_DHM_RFC3526_MODP_3072_G +#define POLARSSL_DHM_RFC3526_MODP_3072_P MBEDTLS_DHM_RFC3526_MODP_3072_P +#define POLARSSL_DHM_RFC5114_MODP_2048_G MBEDTLS_DHM_RFC5114_MODP_2048_G +#define POLARSSL_DHM_RFC5114_MODP_2048_P MBEDTLS_DHM_RFC5114_MODP_2048_P +#define POLARSSL_ECDH_H MBEDTLS_ECDH_H +#define POLARSSL_ECDH_OURS MBEDTLS_ECDH_OURS +#define POLARSSL_ECDH_THEIRS MBEDTLS_ECDH_THEIRS +#define POLARSSL_ECDSA_H MBEDTLS_ECDSA_H +#define POLARSSL_ECP_DP_BP256R1 MBEDTLS_ECP_DP_BP256R1 +#define POLARSSL_ECP_DP_BP384R1 MBEDTLS_ECP_DP_BP384R1 +#define POLARSSL_ECP_DP_BP512R1 MBEDTLS_ECP_DP_BP512R1 +#define POLARSSL_ECP_DP_M255 MBEDTLS_ECP_DP_CURVE25519 +#define POLARSSL_ECP_DP_MAX MBEDTLS_ECP_DP_MAX +#define POLARSSL_ECP_DP_NONE MBEDTLS_ECP_DP_NONE +#define POLARSSL_ECP_DP_SECP192K1 MBEDTLS_ECP_DP_SECP192K1 +#define POLARSSL_ECP_DP_SECP192R1 MBEDTLS_ECP_DP_SECP192R1 +#define POLARSSL_ECP_DP_SECP224K1 MBEDTLS_ECP_DP_SECP224K1 +#define POLARSSL_ECP_DP_SECP224R1 MBEDTLS_ECP_DP_SECP224R1 +#define POLARSSL_ECP_DP_SECP256K1 MBEDTLS_ECP_DP_SECP256K1 +#define POLARSSL_ECP_DP_SECP256R1 MBEDTLS_ECP_DP_SECP256R1 +#define POLARSSL_ECP_DP_SECP384R1 MBEDTLS_ECP_DP_SECP384R1 +#define POLARSSL_ECP_DP_SECP521R1 MBEDTLS_ECP_DP_SECP521R1 +#define POLARSSL_ECP_H MBEDTLS_ECP_H +#define POLARSSL_ECP_MAX_BYTES MBEDTLS_ECP_MAX_BYTES +#define POLARSSL_ECP_MAX_PT_LEN MBEDTLS_ECP_MAX_PT_LEN +#define POLARSSL_ECP_PF_COMPRESSED MBEDTLS_ECP_PF_COMPRESSED +#define POLARSSL_ECP_PF_UNCOMPRESSED MBEDTLS_ECP_PF_UNCOMPRESSED +#define POLARSSL_ECP_TLS_NAMED_CURVE MBEDTLS_ECP_TLS_NAMED_CURVE +#define POLARSSL_ENCRYPT MBEDTLS_ENCRYPT +#define POLARSSL_ENTROPY_H MBEDTLS_ENTROPY_H +#define POLARSSL_ENTROPY_POLL_H MBEDTLS_ENTROPY_POLL_H +#define POLARSSL_ENTROPY_SHA256_ACCUMULATOR MBEDTLS_ENTROPY_SHA256_ACCUMULATOR +#define POLARSSL_ENTROPY_SHA512_ACCUMULATOR MBEDTLS_ENTROPY_SHA512_ACCUMULATOR +#define POLARSSL_ERROR_H MBEDTLS_ERROR_H +#define POLARSSL_ERR_AES_INVALID_INPUT_LENGTH MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH +#define POLARSSL_ERR_AES_INVALID_KEY_LENGTH MBEDTLS_ERR_AES_INVALID_KEY_LENGTH +#define POLARSSL_ERR_ASN1_BUF_TOO_SMALL MBEDTLS_ERR_ASN1_BUF_TOO_SMALL +#define POLARSSL_ERR_ASN1_INVALID_DATA MBEDTLS_ERR_ASN1_INVALID_DATA +#define POLARSSL_ERR_ASN1_INVALID_LENGTH MBEDTLS_ERR_ASN1_INVALID_LENGTH +#define POLARSSL_ERR_ASN1_LENGTH_MISMATCH MBEDTLS_ERR_ASN1_LENGTH_MISMATCH +#define POLARSSL_ERR_ASN1_MALLOC_FAILED MBEDTLS_ERR_ASN1_ALLOC_FAILED +#define POLARSSL_ERR_ASN1_OUT_OF_DATA MBEDTLS_ERR_ASN1_OUT_OF_DATA +#define POLARSSL_ERR_ASN1_UNEXPECTED_TAG MBEDTLS_ERR_ASN1_UNEXPECTED_TAG +#define POLARSSL_ERR_BASE64_BUFFER_TOO_SMALL MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL +#define POLARSSL_ERR_BASE64_INVALID_CHARACTER MBEDTLS_ERR_BASE64_INVALID_CHARACTER +#define POLARSSL_ERR_BLOWFISH_INVALID_INPUT_LENGTH MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH +#define POLARSSL_ERR_BLOWFISH_INVALID_KEY_LENGTH MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH +#define POLARSSL_ERR_CAMELLIA_INVALID_INPUT_LENGTH MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH +#define POLARSSL_ERR_CAMELLIA_INVALID_KEY_LENGTH MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH +#define POLARSSL_ERR_CCM_AUTH_FAILED MBEDTLS_ERR_CCM_AUTH_FAILED +#define POLARSSL_ERR_CCM_BAD_INPUT MBEDTLS_ERR_CCM_BAD_INPUT +#define POLARSSL_ERR_CIPHER_ALLOC_FAILED MBEDTLS_ERR_CIPHER_ALLOC_FAILED +#define POLARSSL_ERR_CIPHER_AUTH_FAILED MBEDTLS_ERR_CIPHER_AUTH_FAILED +#define POLARSSL_ERR_CIPHER_BAD_INPUT_DATA MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA +#define POLARSSL_ERR_CIPHER_FEATURE_UNAVAILABLE MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_CIPHER_FULL_BLOCK_EXPECTED MBEDTLS_ERR_CIPHER_FULL_BLOCK_EXPECTED +#define POLARSSL_ERR_CIPHER_INVALID_PADDING MBEDTLS_ERR_CIPHER_INVALID_PADDING +#define POLARSSL_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED +#define POLARSSL_ERR_CTR_DRBG_FILE_IO_ERROR MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR +#define POLARSSL_ERR_CTR_DRBG_INPUT_TOO_BIG MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG +#define POLARSSL_ERR_CTR_DRBG_REQUEST_TOO_BIG MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG +#define POLARSSL_ERR_DES_INVALID_INPUT_LENGTH MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH +#define POLARSSL_ERR_DHM_BAD_INPUT_DATA MBEDTLS_ERR_DHM_BAD_INPUT_DATA +#define POLARSSL_ERR_DHM_CALC_SECRET_FAILED MBEDTLS_ERR_DHM_CALC_SECRET_FAILED +#define POLARSSL_ERR_DHM_FILE_IO_ERROR MBEDTLS_ERR_DHM_FILE_IO_ERROR +#define POLARSSL_ERR_DHM_INVALID_FORMAT MBEDTLS_ERR_DHM_INVALID_FORMAT +#define POLARSSL_ERR_DHM_MAKE_PARAMS_FAILED MBEDTLS_ERR_DHM_MAKE_PARAMS_FAILED +#define POLARSSL_ERR_DHM_MAKE_PUBLIC_FAILED MBEDTLS_ERR_DHM_MAKE_PUBLIC_FAILED +#define POLARSSL_ERR_DHM_MALLOC_FAILED MBEDTLS_ERR_DHM_ALLOC_FAILED +#define POLARSSL_ERR_DHM_READ_PARAMS_FAILED MBEDTLS_ERR_DHM_READ_PARAMS_FAILED +#define POLARSSL_ERR_DHM_READ_PUBLIC_FAILED MBEDTLS_ERR_DHM_READ_PUBLIC_FAILED +#define POLARSSL_ERR_ECP_BAD_INPUT_DATA MBEDTLS_ERR_ECP_BAD_INPUT_DATA +#define POLARSSL_ERR_ECP_BUFFER_TOO_SMALL MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL +#define POLARSSL_ERR_ECP_FEATURE_UNAVAILABLE MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_ECP_INVALID_KEY MBEDTLS_ERR_ECP_INVALID_KEY +#define POLARSSL_ERR_ECP_MALLOC_FAILED MBEDTLS_ERR_ECP_ALLOC_FAILED +#define POLARSSL_ERR_ECP_RANDOM_FAILED MBEDTLS_ERR_ECP_RANDOM_FAILED +#define POLARSSL_ERR_ECP_SIG_LEN_MISMATCH MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH +#define POLARSSL_ERR_ECP_VERIFY_FAILED MBEDTLS_ERR_ECP_VERIFY_FAILED +#define POLARSSL_ERR_ENTROPY_FILE_IO_ERROR MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR +#define POLARSSL_ERR_ENTROPY_MAX_SOURCES MBEDTLS_ERR_ENTROPY_MAX_SOURCES +#define POLARSSL_ERR_ENTROPY_NO_SOURCES_DEFINED MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED +#define POLARSSL_ERR_ENTROPY_SOURCE_FAILED MBEDTLS_ERR_ENTROPY_SOURCE_FAILED +#define POLARSSL_ERR_GCM_AUTH_FAILED MBEDTLS_ERR_GCM_AUTH_FAILED +#define POLARSSL_ERR_GCM_BAD_INPUT MBEDTLS_ERR_GCM_BAD_INPUT +#define POLARSSL_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED +#define POLARSSL_ERR_HMAC_DRBG_FILE_IO_ERROR MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR +#define POLARSSL_ERR_HMAC_DRBG_INPUT_TOO_BIG MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG +#define POLARSSL_ERR_HMAC_DRBG_REQUEST_TOO_BIG MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG +#define POLARSSL_ERR_MD_ALLOC_FAILED MBEDTLS_ERR_MD_ALLOC_FAILED +#define POLARSSL_ERR_MD_BAD_INPUT_DATA MBEDTLS_ERR_MD_BAD_INPUT_DATA +#define POLARSSL_ERR_MD_FEATURE_UNAVAILABLE MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_MD_FILE_IO_ERROR MBEDTLS_ERR_MD_FILE_IO_ERROR +#define POLARSSL_ERR_MPI_BAD_INPUT_DATA MBEDTLS_ERR_MPI_BAD_INPUT_DATA +#define POLARSSL_ERR_MPI_BUFFER_TOO_SMALL MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL +#define POLARSSL_ERR_MPI_DIVISION_BY_ZERO MBEDTLS_ERR_MPI_DIVISION_BY_ZERO +#define POLARSSL_ERR_MPI_FILE_IO_ERROR MBEDTLS_ERR_MPI_FILE_IO_ERROR +#define POLARSSL_ERR_MPI_INVALID_CHARACTER MBEDTLS_ERR_MPI_INVALID_CHARACTER +#define POLARSSL_ERR_MPI_MALLOC_FAILED MBEDTLS_ERR_MPI_ALLOC_FAILED +#define POLARSSL_ERR_MPI_NEGATIVE_VALUE MBEDTLS_ERR_MPI_NEGATIVE_VALUE +#define POLARSSL_ERR_MPI_NOT_ACCEPTABLE MBEDTLS_ERR_MPI_NOT_ACCEPTABLE +#define POLARSSL_ERR_NET_ACCEPT_FAILED MBEDTLS_ERR_NET_ACCEPT_FAILED +#define POLARSSL_ERR_NET_BIND_FAILED MBEDTLS_ERR_NET_BIND_FAILED +#define POLARSSL_ERR_NET_CONNECT_FAILED MBEDTLS_ERR_NET_CONNECT_FAILED +#define POLARSSL_ERR_NET_CONN_RESET MBEDTLS_ERR_NET_CONN_RESET +#define POLARSSL_ERR_NET_LISTEN_FAILED MBEDTLS_ERR_NET_LISTEN_FAILED +#define POLARSSL_ERR_NET_RECV_FAILED MBEDTLS_ERR_NET_RECV_FAILED +#define POLARSSL_ERR_NET_SEND_FAILED MBEDTLS_ERR_NET_SEND_FAILED +#define POLARSSL_ERR_NET_SOCKET_FAILED MBEDTLS_ERR_NET_SOCKET_FAILED +#define POLARSSL_ERR_NET_TIMEOUT MBEDTLS_ERR_SSL_TIMEOUT +#define POLARSSL_ERR_NET_UNKNOWN_HOST MBEDTLS_ERR_NET_UNKNOWN_HOST +#define POLARSSL_ERR_NET_WANT_READ MBEDTLS_ERR_SSL_WANT_READ +#define POLARSSL_ERR_NET_WANT_WRITE MBEDTLS_ERR_SSL_WANT_WRITE +#define POLARSSL_ERR_OID_BUF_TOO_SMALL MBEDTLS_ERR_OID_BUF_TOO_SMALL +#define POLARSSL_ERR_OID_NOT_FOUND MBEDTLS_ERR_OID_NOT_FOUND +#define POLARSSL_ERR_PADLOCK_DATA_MISALIGNED MBEDTLS_ERR_PADLOCK_DATA_MISALIGNED +#define POLARSSL_ERR_PEM_BAD_INPUT_DATA MBEDTLS_ERR_PEM_BAD_INPUT_DATA +#define POLARSSL_ERR_PEM_FEATURE_UNAVAILABLE MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_PEM_INVALID_DATA MBEDTLS_ERR_PEM_INVALID_DATA +#define POLARSSL_ERR_PEM_INVALID_ENC_IV MBEDTLS_ERR_PEM_INVALID_ENC_IV +#define POLARSSL_ERR_PEM_MALLOC_FAILED MBEDTLS_ERR_PEM_ALLOC_FAILED +#define POLARSSL_ERR_PEM_NO_HEADER_FOOTER_PRESENT MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT +#define POLARSSL_ERR_PEM_PASSWORD_MISMATCH MBEDTLS_ERR_PEM_PASSWORD_MISMATCH +#define POLARSSL_ERR_PEM_PASSWORD_REQUIRED MBEDTLS_ERR_PEM_PASSWORD_REQUIRED +#define POLARSSL_ERR_PEM_UNKNOWN_ENC_ALG MBEDTLS_ERR_PEM_UNKNOWN_ENC_ALG +#define POLARSSL_ERR_PKCS12_BAD_INPUT_DATA MBEDTLS_ERR_PKCS12_BAD_INPUT_DATA +#define POLARSSL_ERR_PKCS12_FEATURE_UNAVAILABLE MBEDTLS_ERR_PKCS12_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_PKCS12_PASSWORD_MISMATCH MBEDTLS_ERR_PKCS12_PASSWORD_MISMATCH +#define POLARSSL_ERR_PKCS12_PBE_INVALID_FORMAT MBEDTLS_ERR_PKCS12_PBE_INVALID_FORMAT +#define POLARSSL_ERR_PKCS5_BAD_INPUT_DATA MBEDTLS_ERR_PKCS5_BAD_INPUT_DATA +#define POLARSSL_ERR_PKCS5_FEATURE_UNAVAILABLE MBEDTLS_ERR_PKCS5_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_PKCS5_INVALID_FORMAT MBEDTLS_ERR_PKCS5_INVALID_FORMAT +#define POLARSSL_ERR_PKCS5_PASSWORD_MISMATCH MBEDTLS_ERR_PKCS5_PASSWORD_MISMATCH +#define POLARSSL_ERR_PK_BAD_INPUT_DATA MBEDTLS_ERR_PK_BAD_INPUT_DATA +#define POLARSSL_ERR_PK_FEATURE_UNAVAILABLE MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_PK_FILE_IO_ERROR MBEDTLS_ERR_PK_FILE_IO_ERROR +#define POLARSSL_ERR_PK_INVALID_ALG MBEDTLS_ERR_PK_INVALID_ALG +#define POLARSSL_ERR_PK_INVALID_PUBKEY MBEDTLS_ERR_PK_INVALID_PUBKEY +#define POLARSSL_ERR_PK_KEY_INVALID_FORMAT MBEDTLS_ERR_PK_KEY_INVALID_FORMAT +#define POLARSSL_ERR_PK_KEY_INVALID_VERSION MBEDTLS_ERR_PK_KEY_INVALID_VERSION +#define POLARSSL_ERR_PK_MALLOC_FAILED MBEDTLS_ERR_PK_ALLOC_FAILED +#define POLARSSL_ERR_PK_PASSWORD_MISMATCH MBEDTLS_ERR_PK_PASSWORD_MISMATCH +#define POLARSSL_ERR_PK_PASSWORD_REQUIRED MBEDTLS_ERR_PK_PASSWORD_REQUIRED +#define POLARSSL_ERR_PK_SIG_LEN_MISMATCH MBEDTLS_ERR_PK_SIG_LEN_MISMATCH +#define POLARSSL_ERR_PK_TYPE_MISMATCH MBEDTLS_ERR_PK_TYPE_MISMATCH +#define POLARSSL_ERR_PK_UNKNOWN_NAMED_CURVE MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE +#define POLARSSL_ERR_PK_UNKNOWN_PK_ALG MBEDTLS_ERR_PK_UNKNOWN_PK_ALG +#define POLARSSL_ERR_RSA_BAD_INPUT_DATA MBEDTLS_ERR_RSA_BAD_INPUT_DATA +#define POLARSSL_ERR_RSA_INVALID_PADDING MBEDTLS_ERR_RSA_INVALID_PADDING +#define POLARSSL_ERR_RSA_KEY_CHECK_FAILED MBEDTLS_ERR_RSA_KEY_CHECK_FAILED +#define POLARSSL_ERR_RSA_KEY_GEN_FAILED MBEDTLS_ERR_RSA_KEY_GEN_FAILED +#define POLARSSL_ERR_RSA_OUTPUT_TOO_LARGE MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE +#define POLARSSL_ERR_RSA_PRIVATE_FAILED MBEDTLS_ERR_RSA_PRIVATE_FAILED +#define POLARSSL_ERR_RSA_PUBLIC_FAILED MBEDTLS_ERR_RSA_PUBLIC_FAILED +#define POLARSSL_ERR_RSA_RNG_FAILED MBEDTLS_ERR_RSA_RNG_FAILED +#define POLARSSL_ERR_RSA_VERIFY_FAILED MBEDTLS_ERR_RSA_VERIFY_FAILED +#define POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE +#define POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST +#define POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY +#define POLARSSL_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC +#define POLARSSL_ERR_SSL_BAD_HS_CLIENT_HELLO MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO +#define POLARSSL_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE +#define POLARSSL_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS +#define POLARSSL_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP +#define POLARSSL_ERR_SSL_BAD_HS_FINISHED MBEDTLS_ERR_SSL_BAD_HS_FINISHED +#define POLARSSL_ERR_SSL_BAD_HS_NEW_SESSION_TICKET MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET +#define POLARSSL_ERR_SSL_BAD_HS_PROTOCOL_VERSION MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION +#define POLARSSL_ERR_SSL_BAD_HS_SERVER_HELLO MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO +#define POLARSSL_ERR_SSL_BAD_HS_SERVER_HELLO_DONE MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE +#define POLARSSL_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE +#define POLARSSL_ERR_SSL_BAD_INPUT_DATA MBEDTLS_ERR_SSL_BAD_INPUT_DATA +#define POLARSSL_ERR_SSL_BUFFER_TOO_SMALL MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL +#define POLARSSL_ERR_SSL_CA_CHAIN_REQUIRED MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED +#define POLARSSL_ERR_SSL_CERTIFICATE_REQUIRED MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED +#define POLARSSL_ERR_SSL_CERTIFICATE_TOO_LARGE MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE +#define POLARSSL_ERR_SSL_COMPRESSION_FAILED MBEDTLS_ERR_SSL_COMPRESSION_FAILED +#define POLARSSL_ERR_SSL_CONN_EOF MBEDTLS_ERR_SSL_CONN_EOF +#define POLARSSL_ERR_SSL_COUNTER_WRAPPING MBEDTLS_ERR_SSL_COUNTER_WRAPPING +#define POLARSSL_ERR_SSL_FATAL_ALERT_MESSAGE MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE +#define POLARSSL_ERR_SSL_FEATURE_UNAVAILABLE MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_SSL_HELLO_VERIFY_REQUIRED MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED +#define POLARSSL_ERR_SSL_HW_ACCEL_FAILED MBEDTLS_ERR_SSL_HW_ACCEL_FAILED +#define POLARSSL_ERR_SSL_HW_ACCEL_FALLTHROUGH MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH +#define POLARSSL_ERR_SSL_INTERNAL_ERROR MBEDTLS_ERR_SSL_INTERNAL_ERROR +#define POLARSSL_ERR_SSL_INVALID_MAC MBEDTLS_ERR_SSL_INVALID_MAC +#define POLARSSL_ERR_SSL_INVALID_RECORD MBEDTLS_ERR_SSL_INVALID_RECORD +#define POLARSSL_ERR_SSL_MALLOC_FAILED MBEDTLS_ERR_SSL_ALLOC_FAILED +#define POLARSSL_ERR_SSL_NO_CIPHER_CHOSEN MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN +#define POLARSSL_ERR_SSL_NO_CLIENT_CERTIFICATE MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE +#define POLARSSL_ERR_SSL_NO_RNG MBEDTLS_ERR_SSL_NO_RNG +#define POLARSSL_ERR_SSL_NO_USABLE_CIPHERSUITE MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE +#define POLARSSL_ERR_SSL_PEER_CLOSE_NOTIFY MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY +#define POLARSSL_ERR_SSL_PEER_VERIFY_FAILED MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED +#define POLARSSL_ERR_SSL_PK_TYPE_MISMATCH MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH +#define POLARSSL_ERR_SSL_PRIVATE_KEY_REQUIRED MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED +#define POLARSSL_ERR_SSL_SESSION_TICKET_EXPIRED MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED +#define POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE +#define POLARSSL_ERR_SSL_UNKNOWN_CIPHER MBEDTLS_ERR_SSL_UNKNOWN_CIPHER +#define POLARSSL_ERR_SSL_UNKNOWN_IDENTITY MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY +#define POLARSSL_ERR_SSL_WAITING_SERVER_HELLO_RENEGO MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO +#define POLARSSL_ERR_THREADING_BAD_INPUT_DATA MBEDTLS_ERR_THREADING_BAD_INPUT_DATA +#define POLARSSL_ERR_THREADING_FEATURE_UNAVAILABLE MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_THREADING_MUTEX_ERROR MBEDTLS_ERR_THREADING_MUTEX_ERROR +#define POLARSSL_ERR_X509_BAD_INPUT_DATA MBEDTLS_ERR_X509_BAD_INPUT_DATA +#define POLARSSL_ERR_X509_CERT_UNKNOWN_FORMAT MBEDTLS_ERR_X509_CERT_UNKNOWN_FORMAT +#define POLARSSL_ERR_X509_CERT_VERIFY_FAILED MBEDTLS_ERR_X509_CERT_VERIFY_FAILED +#define POLARSSL_ERR_X509_FEATURE_UNAVAILABLE MBEDTLS_ERR_X509_FEATURE_UNAVAILABLE +#define POLARSSL_ERR_X509_FILE_IO_ERROR MBEDTLS_ERR_X509_FILE_IO_ERROR +#define POLARSSL_ERR_X509_INVALID_ALG MBEDTLS_ERR_X509_INVALID_ALG +#define POLARSSL_ERR_X509_INVALID_DATE MBEDTLS_ERR_X509_INVALID_DATE +#define POLARSSL_ERR_X509_INVALID_EXTENSIONS MBEDTLS_ERR_X509_INVALID_EXTENSIONS +#define POLARSSL_ERR_X509_INVALID_FORMAT MBEDTLS_ERR_X509_INVALID_FORMAT +#define POLARSSL_ERR_X509_INVALID_NAME MBEDTLS_ERR_X509_INVALID_NAME +#define POLARSSL_ERR_X509_INVALID_SERIAL MBEDTLS_ERR_X509_INVALID_SERIAL +#define POLARSSL_ERR_X509_INVALID_SIGNATURE MBEDTLS_ERR_X509_INVALID_SIGNATURE +#define POLARSSL_ERR_X509_INVALID_VERSION MBEDTLS_ERR_X509_INVALID_VERSION +#define POLARSSL_ERR_X509_MALLOC_FAILED MBEDTLS_ERR_X509_ALLOC_FAILED +#define POLARSSL_ERR_X509_SIG_MISMATCH MBEDTLS_ERR_X509_SIG_MISMATCH +#define POLARSSL_ERR_X509_UNKNOWN_OID MBEDTLS_ERR_X509_UNKNOWN_OID +#define POLARSSL_ERR_X509_UNKNOWN_SIG_ALG MBEDTLS_ERR_X509_UNKNOWN_SIG_ALG +#define POLARSSL_ERR_X509_UNKNOWN_VERSION MBEDTLS_ERR_X509_UNKNOWN_VERSION +#define POLARSSL_ERR_XTEA_INVALID_INPUT_LENGTH MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH +#define POLARSSL_GCM_H MBEDTLS_GCM_H +#define POLARSSL_HAVEGE_H MBEDTLS_HAVEGE_H +#define POLARSSL_HAVE_INT32 MBEDTLS_HAVE_INT32 +#define POLARSSL_HAVE_INT64 MBEDTLS_HAVE_INT64 +#define POLARSSL_HAVE_UDBL MBEDTLS_HAVE_UDBL +#define POLARSSL_HAVE_X86 MBEDTLS_HAVE_X86 +#define POLARSSL_HAVE_X86_64 MBEDTLS_HAVE_X86_64 +#define POLARSSL_HMAC_DRBG_H MBEDTLS_HMAC_DRBG_H +#define POLARSSL_HMAC_DRBG_PR_OFF MBEDTLS_HMAC_DRBG_PR_OFF +#define POLARSSL_HMAC_DRBG_PR_ON MBEDTLS_HMAC_DRBG_PR_ON +#define POLARSSL_KEY_EXCHANGE_DHE_PSK MBEDTLS_KEY_EXCHANGE_DHE_PSK +#define POLARSSL_KEY_EXCHANGE_DHE_RSA MBEDTLS_KEY_EXCHANGE_DHE_RSA +#define POLARSSL_KEY_EXCHANGE_ECDHE_ECDSA MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA +#define POLARSSL_KEY_EXCHANGE_ECDHE_PSK MBEDTLS_KEY_EXCHANGE_ECDHE_PSK +#define POLARSSL_KEY_EXCHANGE_ECDHE_RSA MBEDTLS_KEY_EXCHANGE_ECDHE_RSA +#define POLARSSL_KEY_EXCHANGE_ECDH_ECDSA MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA +#define POLARSSL_KEY_EXCHANGE_ECDH_RSA MBEDTLS_KEY_EXCHANGE_ECDH_RSA +#define POLARSSL_KEY_EXCHANGE_NONE MBEDTLS_KEY_EXCHANGE_NONE +#define POLARSSL_KEY_EXCHANGE_PSK MBEDTLS_KEY_EXCHANGE_PSK +#define POLARSSL_KEY_EXCHANGE_RSA MBEDTLS_KEY_EXCHANGE_RSA +#define POLARSSL_KEY_EXCHANGE_RSA_PSK MBEDTLS_KEY_EXCHANGE_RSA_PSK +#define POLARSSL_KEY_EXCHANGE__SOME__ECDHE_ENABLED MBEDTLS_KEY_EXCHANGE__SOME__ECDHE_ENABLED +#define POLARSSL_KEY_EXCHANGE__SOME__PSK_ENABLED MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED +#define POLARSSL_KEY_EXCHANGE__WITH_CERT__ENABLED MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED +#define POLARSSL_KEY_LENGTH_DES MBEDTLS_KEY_LENGTH_DES +#define POLARSSL_KEY_LENGTH_DES_EDE MBEDTLS_KEY_LENGTH_DES_EDE +#define POLARSSL_KEY_LENGTH_DES_EDE3 MBEDTLS_KEY_LENGTH_DES_EDE3 +#define POLARSSL_KEY_LENGTH_NONE MBEDTLS_KEY_LENGTH_NONE +#define POLARSSL_MAX_BLOCK_LENGTH MBEDTLS_MAX_BLOCK_LENGTH +#define POLARSSL_MAX_IV_LENGTH MBEDTLS_MAX_IV_LENGTH +#define POLARSSL_MD2_H MBEDTLS_MD2_H +#define POLARSSL_MD4_H MBEDTLS_MD4_H +#define POLARSSL_MD5_H MBEDTLS_MD5_H +#define POLARSSL_MD_H MBEDTLS_MD_H +#define POLARSSL_MD_MAX_SIZE MBEDTLS_MD_MAX_SIZE +#define POLARSSL_MD_MD2 MBEDTLS_MD_MD2 +#define POLARSSL_MD_MD4 MBEDTLS_MD_MD4 +#define POLARSSL_MD_MD5 MBEDTLS_MD_MD5 +#define POLARSSL_MD_NONE MBEDTLS_MD_NONE +#define POLARSSL_MD_RIPEMD160 MBEDTLS_MD_RIPEMD160 +#define POLARSSL_MD_SHA1 MBEDTLS_MD_SHA1 +#define POLARSSL_MD_SHA224 MBEDTLS_MD_SHA224 +#define POLARSSL_MD_SHA256 MBEDTLS_MD_SHA256 +#define POLARSSL_MD_SHA384 MBEDTLS_MD_SHA384 +#define POLARSSL_MD_SHA512 MBEDTLS_MD_SHA512 +#define POLARSSL_MD_WRAP_H MBEDTLS_MD_WRAP_H +#define POLARSSL_MEMORY_BUFFER_ALLOC_H MBEDTLS_MEMORY_BUFFER_ALLOC_H +#define POLARSSL_MODE_CBC MBEDTLS_MODE_CBC +#define POLARSSL_MODE_CCM MBEDTLS_MODE_CCM +#define POLARSSL_MODE_CFB MBEDTLS_MODE_CFB +#define POLARSSL_MODE_CTR MBEDTLS_MODE_CTR +#define POLARSSL_MODE_ECB MBEDTLS_MODE_ECB +#define POLARSSL_MODE_GCM MBEDTLS_MODE_GCM +#define POLARSSL_MODE_NONE MBEDTLS_MODE_NONE +#define POLARSSL_MODE_OFB MBEDTLS_MODE_OFB +#define POLARSSL_MODE_STREAM MBEDTLS_MODE_STREAM +#define POLARSSL_MPI_MAX_BITS MBEDTLS_MPI_MAX_BITS +#define POLARSSL_MPI_MAX_BITS_SCALE100 MBEDTLS_MPI_MAX_BITS_SCALE100 +#define POLARSSL_MPI_MAX_LIMBS MBEDTLS_MPI_MAX_LIMBS +#define POLARSSL_MPI_RW_BUFFER_SIZE MBEDTLS_MPI_RW_BUFFER_SIZE +#define POLARSSL_NET_H MBEDTLS_NET_SOCKETS_H +#define POLARSSL_NET_LISTEN_BACKLOG MBEDTLS_NET_LISTEN_BACKLOG +#define POLARSSL_OID_H MBEDTLS_OID_H +#define POLARSSL_OPERATION_NONE MBEDTLS_OPERATION_NONE +#define POLARSSL_PADDING_NONE MBEDTLS_PADDING_NONE +#define POLARSSL_PADDING_ONE_AND_ZEROS MBEDTLS_PADDING_ONE_AND_ZEROS +#define POLARSSL_PADDING_PKCS7 MBEDTLS_PADDING_PKCS7 +#define POLARSSL_PADDING_ZEROS MBEDTLS_PADDING_ZEROS +#define POLARSSL_PADDING_ZEROS_AND_LEN MBEDTLS_PADDING_ZEROS_AND_LEN +#define POLARSSL_PADLOCK_H MBEDTLS_PADLOCK_H +#define POLARSSL_PEM_H MBEDTLS_PEM_H +#define POLARSSL_PKCS11_H MBEDTLS_PKCS11_H +#define POLARSSL_PKCS12_H MBEDTLS_PKCS12_H +#define POLARSSL_PKCS5_H MBEDTLS_PKCS5_H +#define POLARSSL_PK_DEBUG_ECP MBEDTLS_PK_DEBUG_ECP +#define POLARSSL_PK_DEBUG_MAX_ITEMS MBEDTLS_PK_DEBUG_MAX_ITEMS +#define POLARSSL_PK_DEBUG_MPI MBEDTLS_PK_DEBUG_MPI +#define POLARSSL_PK_DEBUG_NONE MBEDTLS_PK_DEBUG_NONE +#define POLARSSL_PK_ECDSA MBEDTLS_PK_ECDSA +#define POLARSSL_PK_ECKEY MBEDTLS_PK_ECKEY +#define POLARSSL_PK_ECKEY_DH MBEDTLS_PK_ECKEY_DH +#define POLARSSL_PK_H MBEDTLS_PK_H +#define POLARSSL_PK_NONE MBEDTLS_PK_NONE +#define POLARSSL_PK_RSA MBEDTLS_PK_RSA +#define POLARSSL_PK_RSASSA_PSS MBEDTLS_PK_RSASSA_PSS +#define POLARSSL_PK_RSA_ALT MBEDTLS_PK_RSA_ALT +#define POLARSSL_PK_WRAP_H MBEDTLS_PK_WRAP_H +#define POLARSSL_PLATFORM_H MBEDTLS_PLATFORM_H +#define POLARSSL_PREMASTER_SIZE MBEDTLS_PREMASTER_SIZE +#define POLARSSL_RIPEMD160_H MBEDTLS_RIPEMD160_H +#define POLARSSL_RSA_H MBEDTLS_RSA_H +#define POLARSSL_SHA1_H MBEDTLS_SHA1_H +#define POLARSSL_SHA256_H MBEDTLS_SHA256_H +#define POLARSSL_SHA512_H MBEDTLS_SHA512_H +#define POLARSSL_SSL_CACHE_H MBEDTLS_SSL_CACHE_H +#define POLARSSL_SSL_CIPHERSUITES_H MBEDTLS_SSL_CIPHERSUITES_H +#define POLARSSL_SSL_COOKIE_H MBEDTLS_SSL_COOKIE_H +#define POLARSSL_SSL_H MBEDTLS_SSL_H +#define POLARSSL_THREADING_H MBEDTLS_THREADING_H +#define POLARSSL_THREADING_IMPL MBEDTLS_THREADING_IMPL +#define POLARSSL_TIMING_H MBEDTLS_TIMING_H +#define POLARSSL_VERSION_H MBEDTLS_VERSION_H +#define POLARSSL_VERSION_MAJOR MBEDTLS_VERSION_MAJOR +#define POLARSSL_VERSION_MINOR MBEDTLS_VERSION_MINOR +#define POLARSSL_VERSION_NUMBER MBEDTLS_VERSION_NUMBER +#define POLARSSL_VERSION_PATCH MBEDTLS_VERSION_PATCH +#define POLARSSL_VERSION_STRING MBEDTLS_VERSION_STRING +#define POLARSSL_VERSION_STRING_FULL MBEDTLS_VERSION_STRING_FULL +#define POLARSSL_X509_CRL_H MBEDTLS_X509_CRL_H +#define POLARSSL_X509_CRT_H MBEDTLS_X509_CRT_H +#define POLARSSL_X509_CSR_H MBEDTLS_X509_CSR_H +#define POLARSSL_X509_H MBEDTLS_X509_H +#define POLARSSL_XTEA_H MBEDTLS_XTEA_H +#define RSA_CRYPT MBEDTLS_RSA_CRYPT +#define RSA_PKCS_V15 MBEDTLS_RSA_PKCS_V15 +#define RSA_PKCS_V21 MBEDTLS_RSA_PKCS_V21 +#define RSA_PRIVATE MBEDTLS_RSA_PRIVATE +#define RSA_PUBLIC MBEDTLS_RSA_PUBLIC +#define RSA_SALT_LEN_ANY MBEDTLS_RSA_SALT_LEN_ANY +#define RSA_SIGN MBEDTLS_RSA_SIGN +#define SSL_ALERT_LEVEL_FATAL MBEDTLS_SSL_ALERT_LEVEL_FATAL +#define SSL_ALERT_LEVEL_WARNING MBEDTLS_SSL_ALERT_LEVEL_WARNING +#define SSL_ALERT_MSG_ACCESS_DENIED MBEDTLS_SSL_ALERT_MSG_ACCESS_DENIED +#define SSL_ALERT_MSG_BAD_CERT MBEDTLS_SSL_ALERT_MSG_BAD_CERT +#define SSL_ALERT_MSG_BAD_RECORD_MAC MBEDTLS_SSL_ALERT_MSG_BAD_RECORD_MAC +#define SSL_ALERT_MSG_CERT_EXPIRED MBEDTLS_SSL_ALERT_MSG_CERT_EXPIRED +#define SSL_ALERT_MSG_CERT_REVOKED MBEDTLS_SSL_ALERT_MSG_CERT_REVOKED +#define SSL_ALERT_MSG_CERT_UNKNOWN MBEDTLS_SSL_ALERT_MSG_CERT_UNKNOWN +#define SSL_ALERT_MSG_CLOSE_NOTIFY MBEDTLS_SSL_ALERT_MSG_CLOSE_NOTIFY +#define SSL_ALERT_MSG_DECODE_ERROR MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR +#define SSL_ALERT_MSG_DECOMPRESSION_FAILURE MBEDTLS_SSL_ALERT_MSG_DECOMPRESSION_FAILURE +#define SSL_ALERT_MSG_DECRYPTION_FAILED MBEDTLS_SSL_ALERT_MSG_DECRYPTION_FAILED +#define SSL_ALERT_MSG_DECRYPT_ERROR MBEDTLS_SSL_ALERT_MSG_DECRYPT_ERROR +#define SSL_ALERT_MSG_EXPORT_RESTRICTION MBEDTLS_SSL_ALERT_MSG_EXPORT_RESTRICTION +#define SSL_ALERT_MSG_HANDSHAKE_FAILURE MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE +#define SSL_ALERT_MSG_ILLEGAL_PARAMETER MBEDTLS_SSL_ALERT_MSG_ILLEGAL_PARAMETER +#define SSL_ALERT_MSG_INAPROPRIATE_FALLBACK MBEDTLS_SSL_ALERT_MSG_INAPROPRIATE_FALLBACK +#define SSL_ALERT_MSG_INSUFFICIENT_SECURITY MBEDTLS_SSL_ALERT_MSG_INSUFFICIENT_SECURITY +#define SSL_ALERT_MSG_INTERNAL_ERROR MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR +#define SSL_ALERT_MSG_NO_APPLICATION_PROTOCOL MBEDTLS_SSL_ALERT_MSG_NO_APPLICATION_PROTOCOL +#define SSL_ALERT_MSG_NO_CERT MBEDTLS_SSL_ALERT_MSG_NO_CERT +#define SSL_ALERT_MSG_NO_RENEGOTIATION MBEDTLS_SSL_ALERT_MSG_NO_RENEGOTIATION +#define SSL_ALERT_MSG_PROTOCOL_VERSION MBEDTLS_SSL_ALERT_MSG_PROTOCOL_VERSION +#define SSL_ALERT_MSG_RECORD_OVERFLOW MBEDTLS_SSL_ALERT_MSG_RECORD_OVERFLOW +#define SSL_ALERT_MSG_UNEXPECTED_MESSAGE MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE +#define SSL_ALERT_MSG_UNKNOWN_CA MBEDTLS_SSL_ALERT_MSG_UNKNOWN_CA +#define SSL_ALERT_MSG_UNKNOWN_PSK_IDENTITY MBEDTLS_SSL_ALERT_MSG_UNKNOWN_PSK_IDENTITY +#define SSL_ALERT_MSG_UNRECOGNIZED_NAME MBEDTLS_SSL_ALERT_MSG_UNRECOGNIZED_NAME +#define SSL_ALERT_MSG_UNSUPPORTED_CERT MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT +#define SSL_ALERT_MSG_UNSUPPORTED_EXT MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_EXT +#define SSL_ALERT_MSG_USER_CANCELED MBEDTLS_SSL_ALERT_MSG_USER_CANCELED +#define SSL_ANTI_REPLAY_DISABLED MBEDTLS_SSL_ANTI_REPLAY_DISABLED +#define SSL_ANTI_REPLAY_ENABLED MBEDTLS_SSL_ANTI_REPLAY_ENABLED +#define SSL_ARC4_DISABLED MBEDTLS_SSL_ARC4_DISABLED +#define SSL_ARC4_ENABLED MBEDTLS_SSL_ARC4_ENABLED +#define SSL_BUFFER_LEN ( ( ( MBEDTLS_SSL_IN_BUFFER_LEN ) < ( MBEDTLS_SSL_OUT_BUFFER_LEN ) ) \ + ? ( MBEDTLS_SSL_IN_BUFFER_LEN ) : ( MBEDTLS_SSL_OUT_BUFFER_LEN ) ) +#define SSL_CACHE_DEFAULT_MAX_ENTRIES MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES +#define SSL_CACHE_DEFAULT_TIMEOUT MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT +#define SSL_CBC_RECORD_SPLITTING_DISABLED MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED +#define SSL_CBC_RECORD_SPLITTING_ENABLED MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED +#define SSL_CERTIFICATE_REQUEST MBEDTLS_SSL_CERTIFICATE_REQUEST +#define SSL_CERTIFICATE_VERIFY MBEDTLS_SSL_CERTIFICATE_VERIFY +#define SSL_CERT_TYPE_ECDSA_SIGN MBEDTLS_SSL_CERT_TYPE_ECDSA_SIGN +#define SSL_CERT_TYPE_RSA_SIGN MBEDTLS_SSL_CERT_TYPE_RSA_SIGN +#define SSL_CHANNEL_INBOUND MBEDTLS_SSL_CHANNEL_INBOUND +#define SSL_CHANNEL_OUTBOUND MBEDTLS_SSL_CHANNEL_OUTBOUND +#define SSL_CIPHERSUITES MBEDTLS_SSL_CIPHERSUITES +#define SSL_CLIENT_CERTIFICATE MBEDTLS_SSL_CLIENT_CERTIFICATE +#define SSL_CLIENT_CHANGE_CIPHER_SPEC MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC +#define SSL_CLIENT_FINISHED MBEDTLS_SSL_CLIENT_FINISHED +#define SSL_CLIENT_HELLO MBEDTLS_SSL_CLIENT_HELLO +#define SSL_CLIENT_KEY_EXCHANGE MBEDTLS_SSL_CLIENT_KEY_EXCHANGE +#define SSL_COMPRESSION_ADD MBEDTLS_SSL_COMPRESSION_ADD +#define SSL_COMPRESS_DEFLATE MBEDTLS_SSL_COMPRESS_DEFLATE +#define SSL_COMPRESS_NULL MBEDTLS_SSL_COMPRESS_NULL +#define SSL_DEBUG_BUF MBEDTLS_SSL_DEBUG_BUF +#define SSL_DEBUG_CRT MBEDTLS_SSL_DEBUG_CRT +#define SSL_DEBUG_ECP MBEDTLS_SSL_DEBUG_ECP +#define SSL_DEBUG_MPI MBEDTLS_SSL_DEBUG_MPI +#define SSL_DEBUG_MSG MBEDTLS_SSL_DEBUG_MSG +#define SSL_DEBUG_RET MBEDTLS_SSL_DEBUG_RET +#define SSL_DEFAULT_TICKET_LIFETIME MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME +#define SSL_DTLS_TIMEOUT_DFL_MAX MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MAX +#define SSL_DTLS_TIMEOUT_DFL_MIN MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MIN +#define SSL_EMPTY_RENEGOTIATION_INFO MBEDTLS_SSL_EMPTY_RENEGOTIATION_INFO +#define SSL_ETM_DISABLED MBEDTLS_SSL_ETM_DISABLED +#define SSL_ETM_ENABLED MBEDTLS_SSL_ETM_ENABLED +#define SSL_EXTENDED_MS_DISABLED MBEDTLS_SSL_EXTENDED_MS_DISABLED +#define SSL_EXTENDED_MS_ENABLED MBEDTLS_SSL_EXTENDED_MS_ENABLED +#define SSL_FALLBACK_SCSV MBEDTLS_SSL_FALLBACK_SCSV +#define SSL_FLUSH_BUFFERS MBEDTLS_SSL_FLUSH_BUFFERS +#define SSL_HANDSHAKE_OVER MBEDTLS_SSL_HANDSHAKE_OVER +#define SSL_HANDSHAKE_WRAPUP MBEDTLS_SSL_HANDSHAKE_WRAPUP +#define SSL_HASH_MD5 MBEDTLS_SSL_HASH_MD5 +#define SSL_HASH_NONE MBEDTLS_SSL_HASH_NONE +#define SSL_HASH_SHA1 MBEDTLS_SSL_HASH_SHA1 +#define SSL_HASH_SHA224 MBEDTLS_SSL_HASH_SHA224 +#define SSL_HASH_SHA256 MBEDTLS_SSL_HASH_SHA256 +#define SSL_HASH_SHA384 MBEDTLS_SSL_HASH_SHA384 +#define SSL_HASH_SHA512 MBEDTLS_SSL_HASH_SHA512 +#define SSL_HELLO_REQUEST MBEDTLS_SSL_HELLO_REQUEST +#define SSL_HS_CERTIFICATE MBEDTLS_SSL_HS_CERTIFICATE +#define SSL_HS_CERTIFICATE_REQUEST MBEDTLS_SSL_HS_CERTIFICATE_REQUEST +#define SSL_HS_CERTIFICATE_VERIFY MBEDTLS_SSL_HS_CERTIFICATE_VERIFY +#define SSL_HS_CLIENT_HELLO MBEDTLS_SSL_HS_CLIENT_HELLO +#define SSL_HS_CLIENT_KEY_EXCHANGE MBEDTLS_SSL_HS_CLIENT_KEY_EXCHANGE +#define SSL_HS_FINISHED MBEDTLS_SSL_HS_FINISHED +#define SSL_HS_HELLO_REQUEST MBEDTLS_SSL_HS_HELLO_REQUEST +#define SSL_HS_HELLO_VERIFY_REQUEST MBEDTLS_SSL_HS_HELLO_VERIFY_REQUEST +#define SSL_HS_NEW_SESSION_TICKET MBEDTLS_SSL_HS_NEW_SESSION_TICKET +#define SSL_HS_SERVER_HELLO MBEDTLS_SSL_HS_SERVER_HELLO +#define SSL_HS_SERVER_HELLO_DONE MBEDTLS_SSL_HS_SERVER_HELLO_DONE +#define SSL_HS_SERVER_KEY_EXCHANGE MBEDTLS_SSL_HS_SERVER_KEY_EXCHANGE +#define SSL_INITIAL_HANDSHAKE MBEDTLS_SSL_INITIAL_HANDSHAKE +#define SSL_IS_CLIENT MBEDTLS_SSL_IS_CLIENT +#define SSL_IS_FALLBACK MBEDTLS_SSL_IS_FALLBACK +#define SSL_IS_NOT_FALLBACK MBEDTLS_SSL_IS_NOT_FALLBACK +#define SSL_IS_SERVER MBEDTLS_SSL_IS_SERVER +#define SSL_LEGACY_ALLOW_RENEGOTIATION MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION +#define SSL_LEGACY_BREAK_HANDSHAKE MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE +#define SSL_LEGACY_NO_RENEGOTIATION MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION +#define SSL_LEGACY_RENEGOTIATION MBEDTLS_SSL_LEGACY_RENEGOTIATION +#define SSL_MAC_ADD MBEDTLS_SSL_MAC_ADD +#define SSL_MAJOR_VERSION_3 MBEDTLS_SSL_MAJOR_VERSION_3 +#define SSL_MAX_CONTENT_LEN MBEDTLS_SSL_MAX_CONTENT_LEN +#define SSL_MAX_FRAG_LEN_1024 MBEDTLS_SSL_MAX_FRAG_LEN_1024 +#define SSL_MAX_FRAG_LEN_2048 MBEDTLS_SSL_MAX_FRAG_LEN_2048 +#define SSL_MAX_FRAG_LEN_4096 MBEDTLS_SSL_MAX_FRAG_LEN_4096 +#define SSL_MAX_FRAG_LEN_512 MBEDTLS_SSL_MAX_FRAG_LEN_512 +#define SSL_MAX_FRAG_LEN_INVALID MBEDTLS_SSL_MAX_FRAG_LEN_INVALID +#define SSL_MAX_FRAG_LEN_NONE MBEDTLS_SSL_MAX_FRAG_LEN_NONE +#define SSL_MAX_MAJOR_VERSION MBEDTLS_SSL_MAX_MAJOR_VERSION +#define SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MAX_MINOR_VERSION +#define SSL_MINOR_VERSION_0 MBEDTLS_SSL_MINOR_VERSION_0 +#define SSL_MINOR_VERSION_1 MBEDTLS_SSL_MINOR_VERSION_1 +#define SSL_MINOR_VERSION_2 MBEDTLS_SSL_MINOR_VERSION_2 +#define SSL_MINOR_VERSION_3 MBEDTLS_SSL_MINOR_VERSION_3 +#define SSL_MIN_MAJOR_VERSION MBEDTLS_SSL_MIN_MAJOR_VERSION +#define SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MIN_MINOR_VERSION +#define SSL_MSG_ALERT MBEDTLS_SSL_MSG_ALERT +#define SSL_MSG_APPLICATION_DATA MBEDTLS_SSL_MSG_APPLICATION_DATA +#define SSL_MSG_CHANGE_CIPHER_SPEC MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC +#define SSL_MSG_HANDSHAKE MBEDTLS_SSL_MSG_HANDSHAKE +#define SSL_PADDING_ADD MBEDTLS_SSL_PADDING_ADD +#define SSL_RENEGOTIATION MBEDTLS_SSL_RENEGOTIATION +#define SSL_RENEGOTIATION_DISABLED MBEDTLS_SSL_RENEGOTIATION_DISABLED +#define SSL_RENEGOTIATION_DONE MBEDTLS_SSL_RENEGOTIATION_DONE +#define SSL_RENEGOTIATION_ENABLED MBEDTLS_SSL_RENEGOTIATION_ENABLED +#define SSL_RENEGOTIATION_NOT_ENFORCED MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED +#define SSL_RENEGOTIATION_PENDING MBEDTLS_SSL_RENEGOTIATION_PENDING +#define SSL_RENEGO_MAX_RECORDS_DEFAULT MBEDTLS_SSL_RENEGO_MAX_RECORDS_DEFAULT +#define SSL_RETRANS_FINISHED MBEDTLS_SSL_RETRANS_FINISHED +#define SSL_RETRANS_PREPARING MBEDTLS_SSL_RETRANS_PREPARING +#define SSL_RETRANS_SENDING MBEDTLS_SSL_RETRANS_SENDING +#define SSL_RETRANS_WAITING MBEDTLS_SSL_RETRANS_WAITING +#define SSL_SECURE_RENEGOTIATION MBEDTLS_SSL_SECURE_RENEGOTIATION +#define SSL_SERVER_CERTIFICATE MBEDTLS_SSL_SERVER_CERTIFICATE +#define SSL_SERVER_CHANGE_CIPHER_SPEC MBEDTLS_SSL_SERVER_CHANGE_CIPHER_SPEC +#define SSL_SERVER_FINISHED MBEDTLS_SSL_SERVER_FINISHED +#define SSL_SERVER_HELLO MBEDTLS_SSL_SERVER_HELLO +#define SSL_SERVER_HELLO_DONE MBEDTLS_SSL_SERVER_HELLO_DONE +#define SSL_SERVER_HELLO_VERIFY_REQUEST_SENT MBEDTLS_SSL_SERVER_HELLO_VERIFY_REQUEST_SENT +#define SSL_SERVER_KEY_EXCHANGE MBEDTLS_SSL_SERVER_KEY_EXCHANGE +#define SSL_SERVER_NEW_SESSION_TICKET MBEDTLS_SSL_SERVER_NEW_SESSION_TICKET +#define SSL_SESSION_TICKETS_DISABLED MBEDTLS_SSL_SESSION_TICKETS_DISABLED +#define SSL_SESSION_TICKETS_ENABLED MBEDTLS_SSL_SESSION_TICKETS_ENABLED +#define SSL_SIG_ANON MBEDTLS_SSL_SIG_ANON +#define SSL_SIG_ECDSA MBEDTLS_SSL_SIG_ECDSA +#define SSL_SIG_RSA MBEDTLS_SSL_SIG_RSA +#define SSL_TRANSPORT_DATAGRAM MBEDTLS_SSL_TRANSPORT_DATAGRAM +#define SSL_TRANSPORT_STREAM MBEDTLS_SSL_TRANSPORT_STREAM +#define SSL_TRUNCATED_HMAC_LEN MBEDTLS_SSL_TRUNCATED_HMAC_LEN +#define SSL_TRUNC_HMAC_DISABLED MBEDTLS_SSL_TRUNC_HMAC_DISABLED +#define SSL_TRUNC_HMAC_ENABLED MBEDTLS_SSL_TRUNC_HMAC_ENABLED +#define SSL_VERIFY_DATA_MAX_LEN MBEDTLS_SSL_VERIFY_DATA_MAX_LEN +#define SSL_VERIFY_NONE MBEDTLS_SSL_VERIFY_NONE +#define SSL_VERIFY_OPTIONAL MBEDTLS_SSL_VERIFY_OPTIONAL +#define SSL_VERIFY_REQUIRED MBEDTLS_SSL_VERIFY_REQUIRED +#define TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA +#define TLS_DHE_PSK_WITH_AES_128_CBC_SHA MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA +#define TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 +#define TLS_DHE_PSK_WITH_AES_128_CCM MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CCM +#define TLS_DHE_PSK_WITH_AES_128_CCM_8 MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CCM_8 +#define TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 +#define TLS_DHE_PSK_WITH_AES_256_CBC_SHA MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA +#define TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 +#define TLS_DHE_PSK_WITH_AES_256_CCM MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CCM +#define TLS_DHE_PSK_WITH_AES_256_CCM_8 MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CCM_8 +#define TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 +#define TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 +#define TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_DHE_PSK_WITH_NULL_SHA MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA +#define TLS_DHE_PSK_WITH_NULL_SHA256 MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 +#define TLS_DHE_PSK_WITH_NULL_SHA384 MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 +#define TLS_DHE_PSK_WITH_RC4_128_SHA MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA +#define TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA +#define TLS_DHE_RSA_WITH_AES_128_CBC_SHA MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA +#define TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 +#define TLS_DHE_RSA_WITH_AES_128_CCM MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CCM +#define TLS_DHE_RSA_WITH_AES_128_CCM_8 MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CCM_8 +#define TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 +#define TLS_DHE_RSA_WITH_AES_256_CBC_SHA MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA +#define TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 +#define TLS_DHE_RSA_WITH_AES_256_CCM MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CCM +#define TLS_DHE_RSA_WITH_AES_256_CCM_8 MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CCM_8 +#define TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 +#define TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA +#define TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA +#define TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 +#define TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_DHE_RSA_WITH_DES_CBC_SHA MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA +#define TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA +#define TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA +#define TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 +#define TLS_ECDHE_ECDSA_WITH_AES_128_CCM MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM +#define TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 +#define TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 +#define TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA +#define TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 +#define TLS_ECDHE_ECDSA_WITH_AES_256_CCM MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CCM +#define TLS_ECDHE_ECDSA_WITH_AES_256_CCM_8 MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CCM_8 +#define TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 +#define TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 +#define TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_ECDHE_ECDSA_WITH_NULL_SHA MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA +#define TLS_ECDHE_ECDSA_WITH_RC4_128_SHA MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA +#define TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA +#define TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA +#define TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 +#define TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA +#define TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 +#define TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 +#define TLS_ECDHE_PSK_WITH_NULL_SHA MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA +#define TLS_ECDHE_PSK_WITH_NULL_SHA256 MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 +#define TLS_ECDHE_PSK_WITH_NULL_SHA384 MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 +#define TLS_ECDHE_PSK_WITH_RC4_128_SHA MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA +#define TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA +#define TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA +#define TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 +#define TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 +#define TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA +#define TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 +#define TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 +#define TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 +#define TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_ECDHE_RSA_WITH_NULL_SHA MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA +#define TLS_ECDHE_RSA_WITH_RC4_128_SHA MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA +#define TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA +#define TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA +#define TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 +#define TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 +#define TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA +#define TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 +#define TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 +#define TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 +#define TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_ECDH_ECDSA_WITH_NULL_SHA MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA +#define TLS_ECDH_ECDSA_WITH_RC4_128_SHA MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA +#define TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA +#define TLS_ECDH_RSA_WITH_AES_128_CBC_SHA MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA +#define TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 +#define TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 +#define TLS_ECDH_RSA_WITH_AES_256_CBC_SHA MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA +#define TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 +#define TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 +#define TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 +#define TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_ECDH_RSA_WITH_NULL_SHA MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA +#define TLS_ECDH_RSA_WITH_RC4_128_SHA MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA +#define TLS_EXT_ALPN MBEDTLS_TLS_EXT_ALPN +#define TLS_EXT_ENCRYPT_THEN_MAC MBEDTLS_TLS_EXT_ENCRYPT_THEN_MAC +#define TLS_EXT_EXTENDED_MASTER_SECRET MBEDTLS_TLS_EXT_EXTENDED_MASTER_SECRET +#define TLS_EXT_MAX_FRAGMENT_LENGTH MBEDTLS_TLS_EXT_MAX_FRAGMENT_LENGTH +#define TLS_EXT_RENEGOTIATION_INFO MBEDTLS_TLS_EXT_RENEGOTIATION_INFO +#define TLS_EXT_SERVERNAME MBEDTLS_TLS_EXT_SERVERNAME +#define TLS_EXT_SERVERNAME_HOSTNAME MBEDTLS_TLS_EXT_SERVERNAME_HOSTNAME +#define TLS_EXT_SESSION_TICKET MBEDTLS_TLS_EXT_SESSION_TICKET +#define TLS_EXT_SIG_ALG MBEDTLS_TLS_EXT_SIG_ALG +#define TLS_EXT_SUPPORTED_ELLIPTIC_CURVES MBEDTLS_TLS_EXT_SUPPORTED_ELLIPTIC_CURVES +#define TLS_EXT_SUPPORTED_POINT_FORMATS MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS +#define TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT +#define TLS_EXT_TRUNCATED_HMAC MBEDTLS_TLS_EXT_TRUNCATED_HMAC +#define TLS_PSK_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA +#define TLS_PSK_WITH_AES_128_CBC_SHA MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA +#define TLS_PSK_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 +#define TLS_PSK_WITH_AES_128_CCM MBEDTLS_TLS_PSK_WITH_AES_128_CCM +#define TLS_PSK_WITH_AES_128_CCM_8 MBEDTLS_TLS_PSK_WITH_AES_128_CCM_8 +#define TLS_PSK_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 +#define TLS_PSK_WITH_AES_256_CBC_SHA MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA +#define TLS_PSK_WITH_AES_256_CBC_SHA384 MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 +#define TLS_PSK_WITH_AES_256_CCM MBEDTLS_TLS_PSK_WITH_AES_256_CCM +#define TLS_PSK_WITH_AES_256_CCM_8 MBEDTLS_TLS_PSK_WITH_AES_256_CCM_8 +#define TLS_PSK_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 +#define TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 +#define TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_PSK_WITH_NULL_SHA MBEDTLS_TLS_PSK_WITH_NULL_SHA +#define TLS_PSK_WITH_NULL_SHA256 MBEDTLS_TLS_PSK_WITH_NULL_SHA256 +#define TLS_PSK_WITH_NULL_SHA384 MBEDTLS_TLS_PSK_WITH_NULL_SHA384 +#define TLS_PSK_WITH_RC4_128_SHA MBEDTLS_TLS_PSK_WITH_RC4_128_SHA +#define TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA +#define TLS_RSA_PSK_WITH_AES_128_CBC_SHA MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA +#define TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 +#define TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 +#define TLS_RSA_PSK_WITH_AES_256_CBC_SHA MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA +#define TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 +#define TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 +#define TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 +#define TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_RSA_PSK_WITH_NULL_SHA MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA +#define TLS_RSA_PSK_WITH_NULL_SHA256 MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 +#define TLS_RSA_PSK_WITH_NULL_SHA384 MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 +#define TLS_RSA_PSK_WITH_RC4_128_SHA MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA +#define TLS_RSA_WITH_3DES_EDE_CBC_SHA MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA +#define TLS_RSA_WITH_AES_128_CBC_SHA MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA +#define TLS_RSA_WITH_AES_128_CBC_SHA256 MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 +#define TLS_RSA_WITH_AES_128_CCM MBEDTLS_TLS_RSA_WITH_AES_128_CCM +#define TLS_RSA_WITH_AES_128_CCM_8 MBEDTLS_TLS_RSA_WITH_AES_128_CCM_8 +#define TLS_RSA_WITH_AES_128_GCM_SHA256 MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 +#define TLS_RSA_WITH_AES_256_CBC_SHA MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA +#define TLS_RSA_WITH_AES_256_CBC_SHA256 MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 +#define TLS_RSA_WITH_AES_256_CCM MBEDTLS_TLS_RSA_WITH_AES_256_CCM +#define TLS_RSA_WITH_AES_256_CCM_8 MBEDTLS_TLS_RSA_WITH_AES_256_CCM_8 +#define TLS_RSA_WITH_AES_256_GCM_SHA384 MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 +#define TLS_RSA_WITH_CAMELLIA_128_CBC_SHA MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA +#define TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 +#define TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 +#define TLS_RSA_WITH_CAMELLIA_256_CBC_SHA MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA +#define TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 +#define TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 +#define TLS_RSA_WITH_DES_CBC_SHA MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA +#define TLS_RSA_WITH_NULL_MD5 MBEDTLS_TLS_RSA_WITH_NULL_MD5 +#define TLS_RSA_WITH_NULL_SHA MBEDTLS_TLS_RSA_WITH_NULL_SHA +#define TLS_RSA_WITH_NULL_SHA256 MBEDTLS_TLS_RSA_WITH_NULL_SHA256 +#define TLS_RSA_WITH_RC4_128_MD5 MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 +#define TLS_RSA_WITH_RC4_128_SHA MBEDTLS_TLS_RSA_WITH_RC4_128_SHA +#define X509_CRT_VERSION_1 MBEDTLS_X509_CRT_VERSION_1 +#define X509_CRT_VERSION_2 MBEDTLS_X509_CRT_VERSION_2 +#define X509_CRT_VERSION_3 MBEDTLS_X509_CRT_VERSION_3 +#define X509_FORMAT_DER MBEDTLS_X509_FORMAT_DER +#define X509_FORMAT_PEM MBEDTLS_X509_FORMAT_PEM +#define X509_MAX_DN_NAME_SIZE MBEDTLS_X509_MAX_DN_NAME_SIZE +#define X509_RFC5280_MAX_SERIAL_LEN MBEDTLS_X509_RFC5280_MAX_SERIAL_LEN +#define X509_RFC5280_UTC_TIME_LEN MBEDTLS_X509_RFC5280_UTC_TIME_LEN +#define XTEA_DECRYPT MBEDTLS_XTEA_DECRYPT +#define XTEA_ENCRYPT MBEDTLS_XTEA_ENCRYPT +#define _asn1_bitstring mbedtls_asn1_bitstring +#define _asn1_buf mbedtls_asn1_buf +#define _asn1_named_data mbedtls_asn1_named_data +#define _asn1_sequence mbedtls_asn1_sequence +#define _ssl_cache_context mbedtls_ssl_cache_context +#define _ssl_cache_entry mbedtls_ssl_cache_entry +#define _ssl_ciphersuite_t mbedtls_ssl_ciphersuite_t +#define _ssl_context mbedtls_ssl_context +#define _ssl_flight_item mbedtls_ssl_flight_item +#define _ssl_handshake_params mbedtls_ssl_handshake_params +#define _ssl_key_cert mbedtls_ssl_key_cert +#define _ssl_premaster_secret mbedtls_ssl_premaster_secret +#define _ssl_session mbedtls_ssl_session +#define _ssl_transform mbedtls_ssl_transform +#define _x509_crl mbedtls_x509_crl +#define _x509_crl_entry mbedtls_x509_crl_entry +#define _x509_crt mbedtls_x509_crt +#define _x509_csr mbedtls_x509_csr +#define _x509_time mbedtls_x509_time +#define _x509write_cert mbedtls_x509write_cert +#define _x509write_csr mbedtls_x509write_csr +#define aes_context mbedtls_aes_context +#define aes_crypt_cbc mbedtls_aes_crypt_cbc +#define aes_crypt_cfb128 mbedtls_aes_crypt_cfb128 +#define aes_crypt_cfb8 mbedtls_aes_crypt_cfb8 +#define aes_crypt_ctr mbedtls_aes_crypt_ctr +#define aes_crypt_ecb mbedtls_aes_crypt_ecb +#define aes_free mbedtls_aes_free +#define aes_init mbedtls_aes_init +#define aes_self_test mbedtls_aes_self_test +#define aes_setkey_dec mbedtls_aes_setkey_dec +#define aes_setkey_enc mbedtls_aes_setkey_enc +#define aesni_crypt_ecb mbedtls_aesni_crypt_ecb +#define aesni_gcm_mult mbedtls_aesni_gcm_mult +#define aesni_inverse_key mbedtls_aesni_inverse_key +#define aesni_setkey_enc mbedtls_aesni_setkey_enc +#define aesni_supports mbedtls_aesni_has_support +#define alarmed mbedtls_timing_alarmed +#define arc4_context mbedtls_arc4_context +#define arc4_crypt mbedtls_arc4_crypt +#define arc4_free mbedtls_arc4_free +#define arc4_init mbedtls_arc4_init +#define arc4_self_test mbedtls_arc4_self_test +#define arc4_setup mbedtls_arc4_setup +#define asn1_bitstring mbedtls_asn1_bitstring +#define asn1_buf mbedtls_asn1_buf +#define asn1_find_named_data mbedtls_asn1_find_named_data +#define asn1_free_named_data mbedtls_asn1_free_named_data +#define asn1_free_named_data_list mbedtls_asn1_free_named_data_list +#define asn1_get_alg mbedtls_asn1_get_alg +#define asn1_get_alg_null mbedtls_asn1_get_alg_null +#define asn1_get_bitstring mbedtls_asn1_get_bitstring +#define asn1_get_bitstring_null mbedtls_asn1_get_bitstring_null +#define asn1_get_bool mbedtls_asn1_get_bool +#define asn1_get_int mbedtls_asn1_get_int +#define asn1_get_len mbedtls_asn1_get_len +#define asn1_get_mpi mbedtls_asn1_get_mpi +#define asn1_get_sequence_of mbedtls_asn1_get_sequence_of +#define asn1_get_tag mbedtls_asn1_get_tag +#define asn1_named_data mbedtls_asn1_named_data +#define asn1_sequence mbedtls_asn1_sequence +#define asn1_store_named_data mbedtls_asn1_store_named_data +#define asn1_write_algorithm_identifier mbedtls_asn1_write_algorithm_identifier +#define asn1_write_bitstring mbedtls_asn1_write_bitstring +#define asn1_write_bool mbedtls_asn1_write_bool +#define asn1_write_ia5_string mbedtls_asn1_write_ia5_string +#define asn1_write_int mbedtls_asn1_write_int +#define asn1_write_len mbedtls_asn1_write_len +#define asn1_write_mpi mbedtls_asn1_write_mpi +#define asn1_write_null mbedtls_asn1_write_null +#define asn1_write_octet_string mbedtls_asn1_write_octet_string +#define asn1_write_oid mbedtls_asn1_write_oid +#define asn1_write_printable_string mbedtls_asn1_write_printable_string +#define asn1_write_raw_buffer mbedtls_asn1_write_raw_buffer +#define asn1_write_tag mbedtls_asn1_write_tag +#define base64_decode mbedtls_base64_decode +#define base64_encode mbedtls_base64_encode +#define base64_self_test mbedtls_base64_self_test +#define blowfish_context mbedtls_blowfish_context +#define blowfish_crypt_cbc mbedtls_blowfish_crypt_cbc +#define blowfish_crypt_cfb64 mbedtls_blowfish_crypt_cfb64 +#define blowfish_crypt_ctr mbedtls_blowfish_crypt_ctr +#define blowfish_crypt_ecb mbedtls_blowfish_crypt_ecb +#define blowfish_free mbedtls_blowfish_free +#define blowfish_init mbedtls_blowfish_init +#define blowfish_setkey mbedtls_blowfish_setkey +#define camellia_context mbedtls_camellia_context +#define camellia_crypt_cbc mbedtls_camellia_crypt_cbc +#define camellia_crypt_cfb128 mbedtls_camellia_crypt_cfb128 +#define camellia_crypt_ctr mbedtls_camellia_crypt_ctr +#define camellia_crypt_ecb mbedtls_camellia_crypt_ecb +#define camellia_free mbedtls_camellia_free +#define camellia_init mbedtls_camellia_init +#define camellia_self_test mbedtls_camellia_self_test +#define camellia_setkey_dec mbedtls_camellia_setkey_dec +#define camellia_setkey_enc mbedtls_camellia_setkey_enc +#define ccm_auth_decrypt mbedtls_ccm_auth_decrypt +#define ccm_context mbedtls_ccm_context +#define ccm_encrypt_and_tag mbedtls_ccm_encrypt_and_tag +#define ccm_free mbedtls_ccm_free +#define ccm_init mbedtls_ccm_init +#define ccm_self_test mbedtls_ccm_self_test +#define cipher_auth_decrypt mbedtls_cipher_auth_decrypt +#define cipher_auth_encrypt mbedtls_cipher_auth_encrypt +#define cipher_base_t mbedtls_cipher_base_t +#define cipher_check_tag mbedtls_cipher_check_tag +#define cipher_context_t mbedtls_cipher_context_t +#define cipher_crypt mbedtls_cipher_crypt +#define cipher_definition_t mbedtls_cipher_definition_t +#define cipher_definitions mbedtls_cipher_definitions +#define cipher_finish mbedtls_cipher_finish +#define cipher_free mbedtls_cipher_free +#define cipher_get_block_size mbedtls_cipher_get_block_size +#define cipher_get_cipher_mode mbedtls_cipher_get_cipher_mode +#define cipher_get_iv_size mbedtls_cipher_get_iv_size +#define cipher_get_key_size mbedtls_cipher_get_key_bitlen +#define cipher_get_name mbedtls_cipher_get_name +#define cipher_get_operation mbedtls_cipher_get_operation +#define cipher_get_type mbedtls_cipher_get_type +#define cipher_id_t mbedtls_cipher_id_t +#define cipher_info_from_string mbedtls_cipher_info_from_string +#define cipher_info_from_type mbedtls_cipher_info_from_type +#define cipher_info_from_values mbedtls_cipher_info_from_values +#define cipher_info_t mbedtls_cipher_info_t +#define cipher_init mbedtls_cipher_init +#define cipher_init_ctx mbedtls_cipher_setup +#define cipher_list mbedtls_cipher_list +#define cipher_mode_t mbedtls_cipher_mode_t +#define cipher_padding_t mbedtls_cipher_padding_t +#define cipher_reset mbedtls_cipher_reset +#define cipher_set_iv mbedtls_cipher_set_iv +#define cipher_set_padding_mode mbedtls_cipher_set_padding_mode +#define cipher_setkey mbedtls_cipher_setkey +#define cipher_type_t mbedtls_cipher_type_t +#define cipher_update mbedtls_cipher_update +#define cipher_update_ad mbedtls_cipher_update_ad +#define cipher_write_tag mbedtls_cipher_write_tag +#define ctr_drbg_context mbedtls_ctr_drbg_context +#define ctr_drbg_free mbedtls_ctr_drbg_free +#define ctr_drbg_init mbedtls_ctr_drbg_init +#define ctr_drbg_random mbedtls_ctr_drbg_random +#define ctr_drbg_random_with_add mbedtls_ctr_drbg_random_with_add +#define ctr_drbg_reseed mbedtls_ctr_drbg_reseed +#define ctr_drbg_self_test mbedtls_ctr_drbg_self_test +#define ctr_drbg_set_entropy_len mbedtls_ctr_drbg_set_entropy_len +#define ctr_drbg_set_prediction_resistance mbedtls_ctr_drbg_set_prediction_resistance +#define ctr_drbg_set_reseed_interval mbedtls_ctr_drbg_set_reseed_interval +#define ctr_drbg_update mbedtls_ctr_drbg_update +#define ctr_drbg_update_seed_file mbedtls_ctr_drbg_update_seed_file +#define ctr_drbg_write_seed_file mbedtls_ctr_drbg_write_seed_file +#define debug_print_buf mbedtls_debug_print_buf +#define debug_print_crt mbedtls_debug_print_crt +#define debug_print_ecp mbedtls_debug_print_ecp +#define debug_print_mpi mbedtls_debug_print_mpi +#define debug_print_msg mbedtls_debug_print_msg +#define debug_print_ret mbedtls_debug_print_ret +#define debug_set_threshold mbedtls_debug_set_threshold +#define des3_context mbedtls_des3_context +#define des3_crypt_cbc mbedtls_des3_crypt_cbc +#define des3_crypt_ecb mbedtls_des3_crypt_ecb +#define des3_free mbedtls_des3_free +#define des3_init mbedtls_des3_init +#define des3_set2key_dec mbedtls_des3_set2key_dec +#define des3_set2key_enc mbedtls_des3_set2key_enc +#define des3_set3key_dec mbedtls_des3_set3key_dec +#define des3_set3key_enc mbedtls_des3_set3key_enc +#define des_context mbedtls_des_context +#define des_crypt_cbc mbedtls_des_crypt_cbc +#define des_crypt_ecb mbedtls_des_crypt_ecb +#define des_free mbedtls_des_free +#define des_init mbedtls_des_init +#define des_key_check_key_parity mbedtls_des_key_check_key_parity +#define des_key_check_weak mbedtls_des_key_check_weak +#define des_key_set_parity mbedtls_des_key_set_parity +#define des_self_test mbedtls_des_self_test +#define des_setkey_dec mbedtls_des_setkey_dec +#define des_setkey_enc mbedtls_des_setkey_enc +#define dhm_calc_secret mbedtls_dhm_calc_secret +#define dhm_context mbedtls_dhm_context +#define dhm_free mbedtls_dhm_free +#define dhm_init mbedtls_dhm_init +#define dhm_make_params mbedtls_dhm_make_params +#define dhm_make_public mbedtls_dhm_make_public +#define dhm_parse_dhm mbedtls_dhm_parse_dhm +#define dhm_parse_dhmfile mbedtls_dhm_parse_dhmfile +#define dhm_read_params mbedtls_dhm_read_params +#define dhm_read_public mbedtls_dhm_read_public +#define dhm_self_test mbedtls_dhm_self_test +#define ecdh_calc_secret mbedtls_ecdh_calc_secret +#define ecdh_compute_shared mbedtls_ecdh_compute_shared +#define ecdh_context mbedtls_ecdh_context +#define ecdh_free mbedtls_ecdh_free +#define ecdh_gen_public mbedtls_ecdh_gen_public +#define ecdh_get_params mbedtls_ecdh_get_params +#define ecdh_init mbedtls_ecdh_init +#define ecdh_make_params mbedtls_ecdh_make_params +#define ecdh_make_public mbedtls_ecdh_make_public +#define ecdh_read_params mbedtls_ecdh_read_params +#define ecdh_read_public mbedtls_ecdh_read_public +#define ecdh_side mbedtls_ecdh_side +#define ecdsa_context mbedtls_ecdsa_context +#define ecdsa_free mbedtls_ecdsa_free +#define ecdsa_from_keypair mbedtls_ecdsa_from_keypair +#define ecdsa_genkey mbedtls_ecdsa_genkey +#define ecdsa_info mbedtls_ecdsa_info +#define ecdsa_init mbedtls_ecdsa_init +#define ecdsa_read_signature mbedtls_ecdsa_read_signature +#define ecdsa_sign mbedtls_ecdsa_sign +#define ecdsa_sign_det mbedtls_ecdsa_sign_det +#define ecdsa_verify mbedtls_ecdsa_verify +#define ecdsa_write_signature mbedtls_ecdsa_write_signature +#define ecdsa_write_signature_det mbedtls_ecdsa_write_signature_det +#define eckey_info mbedtls_eckey_info +#define eckeydh_info mbedtls_eckeydh_info +#define ecp_check_privkey mbedtls_ecp_check_privkey +#define ecp_check_pub_priv mbedtls_ecp_check_pub_priv +#define ecp_check_pubkey mbedtls_ecp_check_pubkey +#define ecp_copy mbedtls_ecp_copy +#define ecp_curve_info mbedtls_ecp_curve_info +#define ecp_curve_info_from_grp_id mbedtls_ecp_curve_info_from_grp_id +#define ecp_curve_info_from_name mbedtls_ecp_curve_info_from_name +#define ecp_curve_info_from_tls_id mbedtls_ecp_curve_info_from_tls_id +#define ecp_curve_list mbedtls_ecp_curve_list +#define ecp_gen_key mbedtls_ecp_gen_key +#define ecp_gen_keypair mbedtls_ecp_gen_keypair +#define ecp_group mbedtls_ecp_group +#define ecp_group_copy mbedtls_ecp_group_copy +#define ecp_group_free mbedtls_ecp_group_free +#define ecp_group_id mbedtls_ecp_group_id +#define ecp_group_init mbedtls_ecp_group_init +#define ecp_grp_id_list mbedtls_ecp_grp_id_list +#define ecp_is_zero mbedtls_ecp_is_zero +#define ecp_keypair mbedtls_ecp_keypair +#define ecp_keypair_free mbedtls_ecp_keypair_free +#define ecp_keypair_init mbedtls_ecp_keypair_init +#define ecp_mul mbedtls_ecp_mul +#define ecp_point mbedtls_ecp_point +#define ecp_point_free mbedtls_ecp_point_free +#define ecp_point_init mbedtls_ecp_point_init +#define ecp_point_read_binary mbedtls_ecp_point_read_binary +#define ecp_point_read_string mbedtls_ecp_point_read_string +#define ecp_point_write_binary mbedtls_ecp_point_write_binary +#define ecp_self_test mbedtls_ecp_self_test +#define ecp_set_zero mbedtls_ecp_set_zero +#define ecp_tls_read_group mbedtls_ecp_tls_read_group +#define ecp_tls_read_point mbedtls_ecp_tls_read_point +#define ecp_tls_write_group mbedtls_ecp_tls_write_group +#define ecp_tls_write_point mbedtls_ecp_tls_write_point +#define ecp_use_known_dp mbedtls_ecp_group_load +#define entropy_add_source mbedtls_entropy_add_source +#define entropy_context mbedtls_entropy_context +#define entropy_free mbedtls_entropy_free +#define entropy_func mbedtls_entropy_func +#define entropy_gather mbedtls_entropy_gather +#define entropy_init mbedtls_entropy_init +#define entropy_self_test mbedtls_entropy_self_test +#define entropy_update_manual mbedtls_entropy_update_manual +#define entropy_update_seed_file mbedtls_entropy_update_seed_file +#define entropy_write_seed_file mbedtls_entropy_write_seed_file +#define error_strerror mbedtls_strerror +#define f_source_ptr mbedtls_entropy_f_source_ptr +#define gcm_auth_decrypt mbedtls_gcm_auth_decrypt +#define gcm_context mbedtls_gcm_context +#define gcm_crypt_and_tag mbedtls_gcm_crypt_and_tag +#define gcm_finish mbedtls_gcm_finish +#define gcm_free mbedtls_gcm_free +#define gcm_init mbedtls_gcm_init +#define gcm_self_test mbedtls_gcm_self_test +#define gcm_starts mbedtls_gcm_starts +#define gcm_update mbedtls_gcm_update +#define get_timer mbedtls_timing_get_timer +#define hardclock mbedtls_timing_hardclock +#define hardclock_poll mbedtls_hardclock_poll +#define havege_free mbedtls_havege_free +#define havege_init mbedtls_havege_init +#define havege_poll mbedtls_havege_poll +#define havege_random mbedtls_havege_random +#define havege_state mbedtls_havege_state +#define hmac_drbg_context mbedtls_hmac_drbg_context +#define hmac_drbg_free mbedtls_hmac_drbg_free +#define hmac_drbg_init mbedtls_hmac_drbg_init +#define hmac_drbg_random mbedtls_hmac_drbg_random +#define hmac_drbg_random_with_add mbedtls_hmac_drbg_random_with_add +#define hmac_drbg_reseed mbedtls_hmac_drbg_reseed +#define hmac_drbg_self_test mbedtls_hmac_drbg_self_test +#define hmac_drbg_set_entropy_len mbedtls_hmac_drbg_set_entropy_len +#define hmac_drbg_set_prediction_resistance mbedtls_hmac_drbg_set_prediction_resistance +#define hmac_drbg_set_reseed_interval mbedtls_hmac_drbg_set_reseed_interval +#define hmac_drbg_update mbedtls_hmac_drbg_update +#define hmac_drbg_update_seed_file mbedtls_hmac_drbg_update_seed_file +#define hmac_drbg_write_seed_file mbedtls_hmac_drbg_write_seed_file +#define hr_time mbedtls_timing_hr_time +#define key_exchange_type_t mbedtls_key_exchange_type_t +#define md mbedtls_md +#define md2 mbedtls_md2 +#define md2_context mbedtls_md2_context +#define md2_finish mbedtls_md2_finish +#define md2_free mbedtls_md2_free +#define md2_info mbedtls_md2_info +#define md2_init mbedtls_md2_init +#define md2_process mbedtls_md2_process +#define md2_self_test mbedtls_md2_self_test +#define md2_starts mbedtls_md2_starts +#define md2_update mbedtls_md2_update +#define md4 mbedtls_md4 +#define md4_context mbedtls_md4_context +#define md4_finish mbedtls_md4_finish +#define md4_free mbedtls_md4_free +#define md4_info mbedtls_md4_info +#define md4_init mbedtls_md4_init +#define md4_process mbedtls_md4_process +#define md4_self_test mbedtls_md4_self_test +#define md4_starts mbedtls_md4_starts +#define md4_update mbedtls_md4_update +#define md5 mbedtls_md5 +#define md5_context mbedtls_md5_context +#define md5_finish mbedtls_md5_finish +#define md5_free mbedtls_md5_free +#define md5_info mbedtls_md5_info +#define md5_init mbedtls_md5_init +#define md5_process mbedtls_md5_process +#define md5_self_test mbedtls_md5_self_test +#define md5_starts mbedtls_md5_starts +#define md5_update mbedtls_md5_update +#define md_context_t mbedtls_md_context_t +#define md_file mbedtls_md_file +#define md_finish mbedtls_md_finish +#define md_free mbedtls_md_free +#define md_get_name mbedtls_md_get_name +#define md_get_size mbedtls_md_get_size +#define md_get_type mbedtls_md_get_type +#define md_hmac mbedtls_md_hmac +#define md_hmac_finish mbedtls_md_hmac_finish +#define md_hmac_reset mbedtls_md_hmac_reset +#define md_hmac_starts mbedtls_md_hmac_starts +#define md_hmac_update mbedtls_md_hmac_update +#define md_info_from_string mbedtls_md_info_from_string +#define md_info_from_type mbedtls_md_info_from_type +#define md_info_t mbedtls_md_info_t +#define md_init mbedtls_md_init +#define md_init_ctx mbedtls_md_init_ctx +#define md_list mbedtls_md_list +#define md_process mbedtls_md_process +#define md_starts mbedtls_md_starts +#define md_type_t mbedtls_md_type_t +#define md_update mbedtls_md_update +#define memory_buffer_alloc_cur_get mbedtls_memory_buffer_alloc_cur_get +#define memory_buffer_alloc_free mbedtls_memory_buffer_alloc_free +#define memory_buffer_alloc_init mbedtls_memory_buffer_alloc_init +#define memory_buffer_alloc_max_get mbedtls_memory_buffer_alloc_max_get +#define memory_buffer_alloc_max_reset mbedtls_memory_buffer_alloc_max_reset +#define memory_buffer_alloc_self_test mbedtls_memory_buffer_alloc_self_test +#define memory_buffer_alloc_status mbedtls_memory_buffer_alloc_status +#define memory_buffer_alloc_verify mbedtls_memory_buffer_alloc_verify +#define memory_buffer_set_verify mbedtls_memory_buffer_set_verify +#define mpi mbedtls_mpi +#define mpi_add_abs mbedtls_mpi_add_abs +#define mpi_add_int mbedtls_mpi_add_int +#define mpi_add_mpi mbedtls_mpi_add_mpi +#define mpi_cmp_abs mbedtls_mpi_cmp_abs +#define mpi_cmp_int mbedtls_mpi_cmp_int +#define mpi_cmp_mpi mbedtls_mpi_cmp_mpi +#define mpi_copy mbedtls_mpi_copy +#define mpi_div_int mbedtls_mpi_div_int +#define mpi_div_mpi mbedtls_mpi_div_mpi +#define mpi_exp_mod mbedtls_mpi_exp_mod +#define mpi_fill_random mbedtls_mpi_fill_random +#define mpi_free mbedtls_mpi_free +#define mpi_gcd mbedtls_mpi_gcd +#define mpi_gen_prime mbedtls_mpi_gen_prime +#define mpi_get_bit mbedtls_mpi_get_bit +#define mpi_grow mbedtls_mpi_grow +#define mpi_init mbedtls_mpi_init +#define mpi_inv_mod mbedtls_mpi_inv_mod +#define mpi_is_prime mbedtls_mpi_is_prime +#define mpi_lsb mbedtls_mpi_lsb +#define mpi_lset mbedtls_mpi_lset +#define mpi_mod_int mbedtls_mpi_mod_int +#define mpi_mod_mpi mbedtls_mpi_mod_mpi +#define mpi_msb mbedtls_mpi_bitlen +#define mpi_mul_int mbedtls_mpi_mul_int +#define mpi_mul_mpi mbedtls_mpi_mul_mpi +#define mpi_read_binary mbedtls_mpi_read_binary +#define mpi_read_file mbedtls_mpi_read_file +#define mpi_read_string mbedtls_mpi_read_string +#define mpi_safe_cond_assign mbedtls_mpi_safe_cond_assign +#define mpi_safe_cond_swap mbedtls_mpi_safe_cond_swap +#define mpi_self_test mbedtls_mpi_self_test +#define mpi_set_bit mbedtls_mpi_set_bit +#define mpi_shift_l mbedtls_mpi_shift_l +#define mpi_shift_r mbedtls_mpi_shift_r +#define mpi_shrink mbedtls_mpi_shrink +#define mpi_size mbedtls_mpi_size +#define mpi_sub_abs mbedtls_mpi_sub_abs +#define mpi_sub_int mbedtls_mpi_sub_int +#define mpi_sub_mpi mbedtls_mpi_sub_mpi +#define mpi_swap mbedtls_mpi_swap +#define mpi_write_binary mbedtls_mpi_write_binary +#define mpi_write_file mbedtls_mpi_write_file +#define mpi_write_string mbedtls_mpi_write_string +#define net_accept mbedtls_net_accept +#define net_bind mbedtls_net_bind +#define net_close mbedtls_net_free +#define net_connect mbedtls_net_connect +#define net_recv mbedtls_net_recv +#define net_recv_timeout mbedtls_net_recv_timeout +#define net_send mbedtls_net_send +#define net_set_block mbedtls_net_set_block +#define net_set_nonblock mbedtls_net_set_nonblock +#define net_usleep mbedtls_net_usleep +#define oid_descriptor_t mbedtls_oid_descriptor_t +#define oid_get_attr_short_name mbedtls_oid_get_attr_short_name +#define oid_get_cipher_alg mbedtls_oid_get_cipher_alg +#define oid_get_ec_grp mbedtls_oid_get_ec_grp +#define oid_get_extended_key_usage mbedtls_oid_get_extended_key_usage +#define oid_get_md_alg mbedtls_oid_get_md_alg +#define oid_get_numeric_string mbedtls_oid_get_numeric_string +#define oid_get_oid_by_ec_grp mbedtls_oid_get_oid_by_ec_grp +#define oid_get_oid_by_md mbedtls_oid_get_oid_by_md +#define oid_get_oid_by_pk_alg mbedtls_oid_get_oid_by_pk_alg +#define oid_get_oid_by_sig_alg mbedtls_oid_get_oid_by_sig_alg +#define oid_get_pk_alg mbedtls_oid_get_pk_alg +#define oid_get_pkcs12_pbe_alg mbedtls_oid_get_pkcs12_pbe_alg +#define oid_get_sig_alg mbedtls_oid_get_sig_alg +#define oid_get_sig_alg_desc mbedtls_oid_get_sig_alg_desc +#define oid_get_x509_ext_type mbedtls_oid_get_x509_ext_type +#define operation_t mbedtls_operation_t +#define padlock_supports mbedtls_padlock_has_support +#define padlock_xcryptcbc mbedtls_padlock_xcryptcbc +#define padlock_xcryptecb mbedtls_padlock_xcryptecb +#define pem_context mbedtls_pem_context +#define pem_free mbedtls_pem_free +#define pem_init mbedtls_pem_init +#define pem_read_buffer mbedtls_pem_read_buffer +#define pem_write_buffer mbedtls_pem_write_buffer +#define pk_can_do mbedtls_pk_can_do +#define pk_check_pair mbedtls_pk_check_pair +#define pk_context mbedtls_pk_context +#define pk_debug mbedtls_pk_debug +#define pk_debug_item mbedtls_pk_debug_item +#define pk_debug_type mbedtls_pk_debug_type +#define pk_decrypt mbedtls_pk_decrypt +#define pk_ec mbedtls_pk_ec +#define pk_encrypt mbedtls_pk_encrypt +#define pk_free mbedtls_pk_free +#define pk_get_len mbedtls_pk_get_len +#define pk_get_name mbedtls_pk_get_name +#define pk_get_size mbedtls_pk_get_bitlen +#define pk_get_type mbedtls_pk_get_type +#define pk_info_from_type mbedtls_pk_info_from_type +#define pk_info_t mbedtls_pk_info_t +#define pk_init mbedtls_pk_init +#define pk_init_ctx mbedtls_pk_setup +#define pk_init_ctx_rsa_alt mbedtls_pk_setup_rsa_alt +#define pk_load_file mbedtls_pk_load_file +#define pk_parse_key mbedtls_pk_parse_key +#define pk_parse_keyfile mbedtls_pk_parse_keyfile +#define pk_parse_public_key mbedtls_pk_parse_public_key +#define pk_parse_public_keyfile mbedtls_pk_parse_public_keyfile +#define pk_parse_subpubkey mbedtls_pk_parse_subpubkey +#define pk_rsa mbedtls_pk_rsa +#define pk_rsa_alt_decrypt_func mbedtls_pk_rsa_alt_decrypt_func +#define pk_rsa_alt_key_len_func mbedtls_pk_rsa_alt_key_len_func +#define pk_rsa_alt_sign_func mbedtls_pk_rsa_alt_sign_func +#define pk_rsassa_pss_options mbedtls_pk_rsassa_pss_options +#define pk_sign mbedtls_pk_sign +#define pk_type_t mbedtls_pk_type_t +#define pk_verify mbedtls_pk_verify +#define pk_verify_ext mbedtls_pk_verify_ext +#define pk_write_key_der mbedtls_pk_write_key_der +#define pk_write_key_pem mbedtls_pk_write_key_pem +#define pk_write_pubkey mbedtls_pk_write_pubkey +#define pk_write_pubkey_der mbedtls_pk_write_pubkey_der +#define pk_write_pubkey_pem mbedtls_pk_write_pubkey_pem +#define pkcs11_context mbedtls_pkcs11_context +#define pkcs11_decrypt mbedtls_pkcs11_decrypt +#define pkcs11_priv_key_free mbedtls_pkcs11_priv_key_free +#define pkcs11_priv_key_init mbedtls_pkcs11_priv_key_bind +#define pkcs11_sign mbedtls_pkcs11_sign +#define pkcs11_x509_cert_init mbedtls_pkcs11_x509_cert_bind +#define pkcs12_derivation mbedtls_pkcs12_derivation +#define pkcs12_pbe mbedtls_pkcs12_pbe +#define pkcs12_pbe_sha1_rc4_128 mbedtls_pkcs12_pbe_sha1_rc4_128 +#define pkcs5_pbes2 mbedtls_pkcs5_pbes2 +#define pkcs5_pbkdf2_hmac mbedtls_pkcs5_pbkdf2_hmac +#define pkcs5_self_test mbedtls_pkcs5_self_test +#define platform_entropy_poll mbedtls_platform_entropy_poll +#define platform_set_exit mbedtls_platform_set_exit +#define platform_set_fprintf mbedtls_platform_set_fprintf +#define platform_set_printf mbedtls_platform_set_printf +#define platform_set_snprintf mbedtls_platform_set_snprintf +#define polarssl_exit mbedtls_exit +#define polarssl_fprintf mbedtls_fprintf +#define polarssl_free mbedtls_free +#define polarssl_mutex_free mbedtls_mutex_free +#define polarssl_mutex_init mbedtls_mutex_init +#define polarssl_mutex_lock mbedtls_mutex_lock +#define polarssl_mutex_unlock mbedtls_mutex_unlock +#define polarssl_printf mbedtls_printf +#define polarssl_snprintf mbedtls_snprintf +#define polarssl_strerror mbedtls_strerror +#define ripemd160 mbedtls_ripemd160 +#define ripemd160_context mbedtls_ripemd160_context +#define ripemd160_finish mbedtls_ripemd160_finish +#define ripemd160_free mbedtls_ripemd160_free +#define ripemd160_info mbedtls_ripemd160_info +#define ripemd160_init mbedtls_ripemd160_init +#define ripemd160_process mbedtls_ripemd160_process +#define ripemd160_self_test mbedtls_ripemd160_self_test +#define ripemd160_starts mbedtls_ripemd160_starts +#define ripemd160_update mbedtls_ripemd160_update +#define rsa_alt_context mbedtls_rsa_alt_context +#define rsa_alt_info mbedtls_rsa_alt_info +#define rsa_check_privkey mbedtls_rsa_check_privkey +#define rsa_check_pub_priv mbedtls_rsa_check_pub_priv +#define rsa_check_pubkey mbedtls_rsa_check_pubkey +#define rsa_context mbedtls_rsa_context +#define rsa_copy mbedtls_rsa_copy +#define rsa_free mbedtls_rsa_free +#define rsa_gen_key mbedtls_rsa_gen_key +#define rsa_info mbedtls_rsa_info +#define rsa_init mbedtls_rsa_init +#define rsa_pkcs1_decrypt mbedtls_rsa_pkcs1_decrypt +#define rsa_pkcs1_encrypt mbedtls_rsa_pkcs1_encrypt +#define rsa_pkcs1_sign mbedtls_rsa_pkcs1_sign +#define rsa_pkcs1_verify mbedtls_rsa_pkcs1_verify +#define rsa_private mbedtls_rsa_private +#define rsa_public mbedtls_rsa_public +#define rsa_rsaes_oaep_decrypt mbedtls_rsa_rsaes_oaep_decrypt +#define rsa_rsaes_oaep_encrypt mbedtls_rsa_rsaes_oaep_encrypt +#define rsa_rsaes_pkcs1_v15_decrypt mbedtls_rsa_rsaes_pkcs1_v15_decrypt +#define rsa_rsaes_pkcs1_v15_encrypt mbedtls_rsa_rsaes_pkcs1_v15_encrypt +#define rsa_rsassa_pkcs1_v15_sign mbedtls_rsa_rsassa_pkcs1_v15_sign +#define rsa_rsassa_pkcs1_v15_verify mbedtls_rsa_rsassa_pkcs1_v15_verify +#define rsa_rsassa_pss_sign mbedtls_rsa_rsassa_pss_sign +#define rsa_rsassa_pss_verify mbedtls_rsa_rsassa_pss_verify +#define rsa_rsassa_pss_verify_ext mbedtls_rsa_rsassa_pss_verify_ext +#define rsa_self_test mbedtls_rsa_self_test +#define rsa_set_padding mbedtls_rsa_set_padding +#define safer_memcmp mbedtls_ssl_safer_memcmp +#define set_alarm mbedtls_set_alarm +#define sha1 mbedtls_sha1 +#define sha1_context mbedtls_sha1_context +#define sha1_finish mbedtls_sha1_finish +#define sha1_free mbedtls_sha1_free +#define sha1_info mbedtls_sha1_info +#define sha1_init mbedtls_sha1_init +#define sha1_process mbedtls_sha1_process +#define sha1_self_test mbedtls_sha1_self_test +#define sha1_starts mbedtls_sha1_starts +#define sha1_update mbedtls_sha1_update +#define sha224_info mbedtls_sha224_info +#define sha256 mbedtls_sha256 +#define sha256_context mbedtls_sha256_context +#define sha256_finish mbedtls_sha256_finish +#define sha256_free mbedtls_sha256_free +#define sha256_info mbedtls_sha256_info +#define sha256_init mbedtls_sha256_init +#define sha256_process mbedtls_sha256_process +#define sha256_self_test mbedtls_sha256_self_test +#define sha256_starts mbedtls_sha256_starts +#define sha256_update mbedtls_sha256_update +#define sha384_info mbedtls_sha384_info +#define sha512 mbedtls_sha512 +#define sha512_context mbedtls_sha512_context +#define sha512_finish mbedtls_sha512_finish +#define sha512_free mbedtls_sha512_free +#define sha512_info mbedtls_sha512_info +#define sha512_init mbedtls_sha512_init +#define sha512_process mbedtls_sha512_process +#define sha512_self_test mbedtls_sha512_self_test +#define sha512_starts mbedtls_sha512_starts +#define sha512_update mbedtls_sha512_update +#define source_state mbedtls_entropy_source_state +#define ssl_cache_context mbedtls_ssl_cache_context +#define ssl_cache_entry mbedtls_ssl_cache_entry +#define ssl_cache_free mbedtls_ssl_cache_free +#define ssl_cache_get mbedtls_ssl_cache_get +#define ssl_cache_init mbedtls_ssl_cache_init +#define ssl_cache_set mbedtls_ssl_cache_set +#define ssl_cache_set_max_entries mbedtls_ssl_cache_set_max_entries +#define ssl_cache_set_timeout mbedtls_ssl_cache_set_timeout +#define ssl_check_cert_usage mbedtls_ssl_check_cert_usage +#define ssl_ciphersuite_from_id mbedtls_ssl_ciphersuite_from_id +#define ssl_ciphersuite_from_string mbedtls_ssl_ciphersuite_from_string +#define ssl_ciphersuite_t mbedtls_ssl_ciphersuite_t +#define ssl_ciphersuite_uses_ec mbedtls_ssl_ciphersuite_uses_ec +#define ssl_ciphersuite_uses_psk mbedtls_ssl_ciphersuite_uses_psk +#define ssl_close_notify mbedtls_ssl_close_notify +#define ssl_context mbedtls_ssl_context +#define ssl_cookie_check mbedtls_ssl_cookie_check +#define ssl_cookie_check_t mbedtls_ssl_cookie_check_t +#define ssl_cookie_ctx mbedtls_ssl_cookie_ctx +#define ssl_cookie_free mbedtls_ssl_cookie_free +#define ssl_cookie_init mbedtls_ssl_cookie_init +#define ssl_cookie_set_timeout mbedtls_ssl_cookie_set_timeout +#define ssl_cookie_setup mbedtls_ssl_cookie_setup +#define ssl_cookie_write mbedtls_ssl_cookie_write +#define ssl_cookie_write_t mbedtls_ssl_cookie_write_t +#define ssl_derive_keys mbedtls_ssl_derive_keys +#define ssl_dtls_replay_check mbedtls_ssl_dtls_replay_check +#define ssl_dtls_replay_update mbedtls_ssl_dtls_replay_update +#define ssl_fetch_input mbedtls_ssl_fetch_input +#define ssl_flight_item mbedtls_ssl_flight_item +#define ssl_flush_output mbedtls_ssl_flush_output +#define ssl_free mbedtls_ssl_free +#define ssl_get_alpn_protocol mbedtls_ssl_get_alpn_protocol +#define ssl_get_bytes_avail mbedtls_ssl_get_bytes_avail +#define ssl_get_ciphersuite mbedtls_ssl_get_ciphersuite +#define ssl_get_ciphersuite_id mbedtls_ssl_get_ciphersuite_id +#define ssl_get_ciphersuite_name mbedtls_ssl_get_ciphersuite_name +#define ssl_get_ciphersuite_sig_pk_alg mbedtls_ssl_get_ciphersuite_sig_pk_alg +#define ssl_get_peer_cert mbedtls_ssl_get_peer_cert +#define ssl_get_record_expansion mbedtls_ssl_get_record_expansion +#define ssl_get_session mbedtls_ssl_get_session +#define ssl_get_verify_result mbedtls_ssl_get_verify_result +#define ssl_get_version mbedtls_ssl_get_version +#define ssl_handshake mbedtls_ssl_handshake +#define ssl_handshake_client_step mbedtls_ssl_handshake_client_step +#define ssl_handshake_free mbedtls_ssl_handshake_free +#define ssl_handshake_params mbedtls_ssl_handshake_params +#define ssl_handshake_server_step mbedtls_ssl_handshake_server_step +#define ssl_handshake_step mbedtls_ssl_handshake_step +#define ssl_handshake_wrapup mbedtls_ssl_handshake_wrapup +#define ssl_hdr_len mbedtls_ssl_hdr_len +#define ssl_hs_hdr_len mbedtls_ssl_hs_hdr_len +#define ssl_hw_record_activate mbedtls_ssl_hw_record_activate +#define ssl_hw_record_finish mbedtls_ssl_hw_record_finish +#define ssl_hw_record_init mbedtls_ssl_hw_record_init +#define ssl_hw_record_read mbedtls_ssl_hw_record_read +#define ssl_hw_record_reset mbedtls_ssl_hw_record_reset +#define ssl_hw_record_write mbedtls_ssl_hw_record_write +#define ssl_init mbedtls_ssl_init +#define ssl_key_cert mbedtls_ssl_key_cert +#define ssl_legacy_renegotiation mbedtls_ssl_conf_legacy_renegotiation +#define ssl_list_ciphersuites mbedtls_ssl_list_ciphersuites +#define ssl_md_alg_from_hash mbedtls_ssl_md_alg_from_hash +#define ssl_optimize_checksum mbedtls_ssl_optimize_checksum +#define ssl_own_cert mbedtls_ssl_own_cert +#define ssl_own_key mbedtls_ssl_own_key +#define ssl_parse_certificate mbedtls_ssl_parse_certificate +#define ssl_parse_change_cipher_spec mbedtls_ssl_parse_change_cipher_spec +#define ssl_parse_finished mbedtls_ssl_parse_finished +#define ssl_pk_alg_from_sig mbedtls_ssl_pk_alg_from_sig +#define ssl_pkcs11_decrypt mbedtls_ssl_pkcs11_decrypt +#define ssl_pkcs11_key_len mbedtls_ssl_pkcs11_key_len +#define ssl_pkcs11_sign mbedtls_ssl_pkcs11_sign +#define ssl_psk_derive_premaster mbedtls_ssl_psk_derive_premaster +#define ssl_read mbedtls_ssl_read +#define ssl_read_record mbedtls_ssl_read_record +#define ssl_read_version mbedtls_ssl_read_version +#define ssl_recv_flight_completed mbedtls_ssl_recv_flight_completed +#define ssl_renegotiate mbedtls_ssl_renegotiate +#define ssl_resend mbedtls_ssl_resend +#define ssl_reset_checksum mbedtls_ssl_reset_checksum +#define ssl_send_alert_message mbedtls_ssl_send_alert_message +#define ssl_send_fatal_handshake_failure mbedtls_ssl_send_fatal_handshake_failure +#define ssl_send_flight_completed mbedtls_ssl_send_flight_completed +#define ssl_session mbedtls_ssl_session +#define ssl_session_free mbedtls_ssl_session_free +#define ssl_session_init mbedtls_ssl_session_init +#define ssl_session_reset mbedtls_ssl_session_reset +#define ssl_set_alpn_protocols mbedtls_ssl_conf_alpn_protocols +#define ssl_set_arc4_support mbedtls_ssl_conf_arc4_support +#define ssl_set_authmode mbedtls_ssl_conf_authmode +#define ssl_set_bio mbedtls_ssl_set_bio +#define ssl_set_ca_chain mbedtls_ssl_conf_ca_chain +#define ssl_set_cbc_record_splitting mbedtls_ssl_conf_cbc_record_splitting +#define ssl_set_ciphersuites mbedtls_ssl_conf_ciphersuites +#define ssl_set_ciphersuites_for_version mbedtls_ssl_conf_ciphersuites_for_version +#define ssl_set_client_transport_id mbedtls_ssl_set_client_transport_id +#define ssl_set_curves mbedtls_ssl_conf_curves +#define ssl_set_dbg mbedtls_ssl_conf_dbg +#define ssl_set_dh_param mbedtls_ssl_conf_dh_param +#define ssl_set_dh_param_ctx mbedtls_ssl_conf_dh_param_ctx +#define ssl_set_dtls_anti_replay mbedtls_ssl_conf_dtls_anti_replay +#define ssl_set_dtls_badmac_limit mbedtls_ssl_conf_dtls_badmac_limit +#define ssl_set_dtls_cookies mbedtls_ssl_conf_dtls_cookies +#define ssl_set_encrypt_then_mac mbedtls_ssl_conf_encrypt_then_mac +#define ssl_set_endpoint mbedtls_ssl_conf_endpoint +#define ssl_set_extended_master_secret mbedtls_ssl_conf_extended_master_secret +#define ssl_set_fallback mbedtls_ssl_conf_fallback +#define ssl_set_handshake_timeout mbedtls_ssl_conf_handshake_timeout +#define ssl_set_hostname mbedtls_ssl_set_hostname +#define ssl_set_max_frag_len mbedtls_ssl_conf_max_frag_len +#define ssl_set_max_version mbedtls_ssl_conf_max_version +#define ssl_set_min_version mbedtls_ssl_conf_min_version +#define ssl_set_own_cert mbedtls_ssl_conf_own_cert +#define ssl_set_psk mbedtls_ssl_conf_psk +#define ssl_set_psk_cb mbedtls_ssl_conf_psk_cb +#define ssl_set_renegotiation mbedtls_ssl_conf_renegotiation +#define ssl_set_renegotiation_enforced mbedtls_ssl_conf_renegotiation_enforced +#define ssl_set_renegotiation_period mbedtls_ssl_conf_renegotiation_period +#define ssl_set_rng mbedtls_ssl_conf_rng +#define ssl_set_session mbedtls_ssl_set_session +#define ssl_set_session_cache mbedtls_ssl_conf_session_cache +#define ssl_set_session_tickets mbedtls_ssl_conf_session_tickets +#define ssl_set_sni mbedtls_ssl_conf_sni +#define ssl_set_transport mbedtls_ssl_conf_transport +#define ssl_set_truncated_hmac mbedtls_ssl_conf_truncated_hmac +#define ssl_set_verify mbedtls_ssl_conf_verify +#define ssl_sig_from_pk mbedtls_ssl_sig_from_pk +#define ssl_states mbedtls_ssl_states +#define ssl_transform mbedtls_ssl_transform +#define ssl_transform_free mbedtls_ssl_transform_free +#define ssl_write mbedtls_ssl_write +#define ssl_write_certificate mbedtls_ssl_write_certificate +#define ssl_write_change_cipher_spec mbedtls_ssl_write_change_cipher_spec +#define ssl_write_finished mbedtls_ssl_write_finished +#define ssl_write_record mbedtls_ssl_write_record +#define ssl_write_version mbedtls_ssl_write_version +#define supported_ciphers mbedtls_cipher_supported +#define t_sint mbedtls_mpi_sint +#define t_udbl mbedtls_t_udbl +#define t_uint mbedtls_mpi_uint +#define test_ca_crt mbedtls_test_ca_crt +#define test_ca_crt_ec mbedtls_test_ca_crt_ec +#define test_ca_crt_rsa mbedtls_test_ca_crt_rsa +#define test_ca_key mbedtls_test_ca_key +#define test_ca_key_ec mbedtls_test_ca_key_ec +#define test_ca_key_rsa mbedtls_test_ca_key_rsa +#define test_ca_list mbedtls_test_cas_pem +#define test_ca_pwd mbedtls_test_ca_pwd +#define test_ca_pwd_ec mbedtls_test_ca_pwd_ec +#define test_ca_pwd_rsa mbedtls_test_ca_pwd_rsa +#define test_cli_crt mbedtls_test_cli_crt +#define test_cli_crt_ec mbedtls_test_cli_crt_ec +#define test_cli_crt_rsa mbedtls_test_cli_crt_rsa +#define test_cli_key mbedtls_test_cli_key +#define test_cli_key_ec mbedtls_test_cli_key_ec +#define test_cli_key_rsa mbedtls_test_cli_key_rsa +#define test_srv_crt mbedtls_test_srv_crt +#define test_srv_crt_ec mbedtls_test_srv_crt_ec +#define test_srv_crt_rsa mbedtls_test_srv_crt_rsa +#define test_srv_key mbedtls_test_srv_key +#define test_srv_key_ec mbedtls_test_srv_key_ec +#define test_srv_key_rsa mbedtls_test_srv_key_rsa +#define threading_mutex_t mbedtls_threading_mutex_t +#define threading_set_alt mbedtls_threading_set_alt +#define timing_self_test mbedtls_timing_self_test +#define version_check_feature mbedtls_version_check_feature +#define version_get_number mbedtls_version_get_number +#define version_get_string mbedtls_version_get_string +#define version_get_string_full mbedtls_version_get_string_full +#define x509_bitstring mbedtls_x509_bitstring +#define x509_buf mbedtls_x509_buf +#define x509_crl mbedtls_x509_crl +#define x509_crl_entry mbedtls_x509_crl_entry +#define x509_crl_free mbedtls_x509_crl_free +#define x509_crl_info mbedtls_x509_crl_info +#define x509_crl_init mbedtls_x509_crl_init +#define x509_crl_parse mbedtls_x509_crl_parse +#define x509_crl_parse_der mbedtls_x509_crl_parse_der +#define x509_crl_parse_file mbedtls_x509_crl_parse_file +#define x509_crt mbedtls_x509_crt +#define x509_crt_check_extended_key_usage mbedtls_x509_crt_check_extended_key_usage +#define x509_crt_check_key_usage mbedtls_x509_crt_check_key_usage +#define x509_crt_free mbedtls_x509_crt_free +#define x509_crt_info mbedtls_x509_crt_info +#define x509_crt_init mbedtls_x509_crt_init +#define x509_crt_parse mbedtls_x509_crt_parse +#define x509_crt_parse_der mbedtls_x509_crt_parse_der +#define x509_crt_parse_file mbedtls_x509_crt_parse_file +#define x509_crt_parse_path mbedtls_x509_crt_parse_path +#define x509_crt_revoked mbedtls_x509_crt_is_revoked +#define x509_crt_verify mbedtls_x509_crt_verify +#define x509_csr mbedtls_x509_csr +#define x509_csr_free mbedtls_x509_csr_free +#define x509_csr_info mbedtls_x509_csr_info +#define x509_csr_init mbedtls_x509_csr_init +#define x509_csr_parse mbedtls_x509_csr_parse +#define x509_csr_parse_der mbedtls_x509_csr_parse_der +#define x509_csr_parse_file mbedtls_x509_csr_parse_file +#define x509_dn_gets mbedtls_x509_dn_gets +#define x509_get_alg mbedtls_x509_get_alg +#define x509_get_alg_null mbedtls_x509_get_alg_null +#define x509_get_ext mbedtls_x509_get_ext +#define x509_get_name mbedtls_x509_get_name +#define x509_get_rsassa_pss_params mbedtls_x509_get_rsassa_pss_params +#define x509_get_serial mbedtls_x509_get_serial +#define x509_get_sig mbedtls_x509_get_sig +#define x509_get_sig_alg mbedtls_x509_get_sig_alg +#define x509_get_time mbedtls_x509_get_time +#define x509_key_size_helper mbedtls_x509_key_size_helper +#define x509_name mbedtls_x509_name +#define x509_self_test mbedtls_x509_self_test +#define x509_sequence mbedtls_x509_sequence +#define x509_serial_gets mbedtls_x509_serial_gets +#define x509_set_extension mbedtls_x509_set_extension +#define x509_sig_alg_gets mbedtls_x509_sig_alg_gets +#define x509_string_to_names mbedtls_x509_string_to_names +#define x509_time mbedtls_x509_time +#define x509_time_expired mbedtls_x509_time_is_past +#define x509_time_future mbedtls_x509_time_is_future +#define x509_write_extensions mbedtls_x509_write_extensions +#define x509_write_names mbedtls_x509_write_names +#define x509_write_sig mbedtls_x509_write_sig +#define x509write_cert mbedtls_x509write_cert +#define x509write_crt_der mbedtls_x509write_crt_der +#define x509write_crt_free mbedtls_x509write_crt_free +#define x509write_crt_init mbedtls_x509write_crt_init +#define x509write_crt_pem mbedtls_x509write_crt_pem +#define x509write_crt_set_authority_key_identifier mbedtls_x509write_crt_set_authority_key_identifier +#define x509write_crt_set_basic_constraints mbedtls_x509write_crt_set_basic_constraints +#define x509write_crt_set_extension mbedtls_x509write_crt_set_extension +#define x509write_crt_set_issuer_key mbedtls_x509write_crt_set_issuer_key +#define x509write_crt_set_issuer_name mbedtls_x509write_crt_set_issuer_name +#define x509write_crt_set_key_usage mbedtls_x509write_crt_set_key_usage +#define x509write_crt_set_md_alg mbedtls_x509write_crt_set_md_alg +#define x509write_crt_set_ns_cert_type mbedtls_x509write_crt_set_ns_cert_type +#define x509write_crt_set_serial mbedtls_x509write_crt_set_serial +#define x509write_crt_set_subject_key mbedtls_x509write_crt_set_subject_key +#define x509write_crt_set_subject_key_identifier mbedtls_x509write_crt_set_subject_key_identifier +#define x509write_crt_set_subject_name mbedtls_x509write_crt_set_subject_name +#define x509write_crt_set_validity mbedtls_x509write_crt_set_validity +#define x509write_crt_set_version mbedtls_x509write_crt_set_version +#define x509write_csr mbedtls_x509write_csr +#define x509write_csr_der mbedtls_x509write_csr_der +#define x509write_csr_free mbedtls_x509write_csr_free +#define x509write_csr_init mbedtls_x509write_csr_init +#define x509write_csr_pem mbedtls_x509write_csr_pem +#define x509write_csr_set_extension mbedtls_x509write_csr_set_extension +#define x509write_csr_set_key mbedtls_x509write_csr_set_key +#define x509write_csr_set_key_usage mbedtls_x509write_csr_set_key_usage +#define x509write_csr_set_md_alg mbedtls_x509write_csr_set_md_alg +#define x509write_csr_set_ns_cert_type mbedtls_x509write_csr_set_ns_cert_type +#define x509write_csr_set_subject_name mbedtls_x509write_csr_set_subject_name +#define xtea_context mbedtls_xtea_context +#define xtea_crypt_cbc mbedtls_xtea_crypt_cbc +#define xtea_crypt_ecb mbedtls_xtea_crypt_ecb +#define xtea_free mbedtls_xtea_free +#define xtea_init mbedtls_xtea_init +#define xtea_self_test mbedtls_xtea_self_test +#define xtea_setup mbedtls_xtea_setup + +#endif /* compat-1.3.h */ +#endif /* MBEDTLS_DEPRECATED_REMOVED */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/config.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/config.h new file mode 100644 index 000000000..654f9725e --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/config.h @@ -0,0 +1,3294 @@ +/** + * \file config.h + * + * \brief Configuration options (set of defines) + * + * This set of compile-time options may be used to enable + * or disable features selectively, and reduce the global + * memory footprint. + */ +/* + * Copyright (C) 2006-2018, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_CONFIG_H +#define MBEDTLS_CONFIG_H + +#if defined(_MSC_VER) && !defined(_CRT_SECURE_NO_DEPRECATE) +#define _CRT_SECURE_NO_DEPRECATE 1 +#endif + +/** + * \name SECTION: System support + * + * This section sets system specific settings. + * \{ + */ + +/** + * \def MBEDTLS_HAVE_ASM + * + * The compiler has support for asm(). + * + * Requires support for asm() in compiler. + * + * Used in: + * library/aria.c + * library/timing.c + * include/mbedtls/bn_mul.h + * + * Required by: + * MBEDTLS_AESNI_C + * MBEDTLS_PADLOCK_C + * + * Comment to disable the use of assembly code. + */ +#define MBEDTLS_HAVE_ASM + +/** + * \def MBEDTLS_NO_UDBL_DIVISION + * + * The platform lacks support for double-width integer division (64-bit + * division on a 32-bit platform, 128-bit division on a 64-bit platform). + * + * Used in: + * include/mbedtls/bignum.h + * library/bignum.c + * + * The bignum code uses double-width division to speed up some operations. + * Double-width division is often implemented in software that needs to + * be linked with the program. The presence of a double-width integer + * type is usually detected automatically through preprocessor macros, + * but the automatic detection cannot know whether the code needs to + * and can be linked with an implementation of division for that type. + * By default division is assumed to be usable if the type is present. + * Uncomment this option to prevent the use of double-width division. + * + * Note that division for the native integer type is always required. + * Furthermore, a 64-bit type is always required even on a 32-bit + * platform, but it need not support multiplication or division. In some + * cases it is also desirable to disable some double-width operations. For + * example, if double-width division is implemented in software, disabling + * it can reduce code size in some embedded targets. + */ +//#define MBEDTLS_NO_UDBL_DIVISION + +/** + * \def MBEDTLS_NO_64BIT_MULTIPLICATION + * + * The platform lacks support for 32x32 -> 64-bit multiplication. + * + * Used in: + * library/poly1305.c + * + * Some parts of the library may use multiplication of two unsigned 32-bit + * operands with a 64-bit result in order to speed up computations. On some + * platforms, this is not available in hardware and has to be implemented in + * software, usually in a library provided by the toolchain. + * + * Sometimes it is not desirable to have to link to that library. This option + * removes the dependency of that library on platforms that lack a hardware + * 64-bit multiplier by embedding a software implementation in Mbed TLS. + * + * Note that depending on the compiler, this may decrease performance compared + * to using the library function provided by the toolchain. + */ +//#define MBEDTLS_NO_64BIT_MULTIPLICATION + +/** + * \def MBEDTLS_HAVE_SSE2 + * + * CPU supports SSE2 instruction set. + * + * Uncomment if the CPU supports SSE2 (IA-32 specific). + */ +//#define MBEDTLS_HAVE_SSE2 + +/** + * \def MBEDTLS_HAVE_TIME + * + * System has time.h and time(). + * The time does not need to be correct, only time differences are used, + * by contrast with MBEDTLS_HAVE_TIME_DATE + * + * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT, + * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and + * MBEDTLS_PLATFORM_STD_TIME. + * + * Comment if your system does not support time functions + */ +#define MBEDTLS_HAVE_TIME + +/** + * \def MBEDTLS_HAVE_TIME_DATE + * + * System has time.h, time(), and an implementation for + * mbedtls_platform_gmtime_r() (see below). + * The time needs to be correct (not necesarily very accurate, but at least + * the date should be correct). This is used to verify the validity period of + * X.509 certificates. + * + * Comment if your system does not have a correct clock. + * + * \note mbedtls_platform_gmtime_r() is an abstraction in platform_util.h that + * behaves similarly to the gmtime_r() function from the C standard. Refer to + * the documentation for mbedtls_platform_gmtime_r() for more information. + * + * \note It is possible to configure an implementation for + * mbedtls_platform_gmtime_r() at compile-time by using the macro + * MBEDTLS_PLATFORM_GMTIME_R_ALT. + */ +#define MBEDTLS_HAVE_TIME_DATE + +/** + * \def MBEDTLS_PLATFORM_MEMORY + * + * Enable the memory allocation layer. + * + * By default mbed TLS uses the system-provided calloc() and free(). + * This allows different allocators (self-implemented or provided) to be + * provided to the platform abstraction layer. + * + * Enabling MBEDTLS_PLATFORM_MEMORY without the + * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide + * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and + * free() function pointer at runtime. + * + * Enabling MBEDTLS_PLATFORM_MEMORY and specifying + * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the + * alternate function at compile time. + * + * Requires: MBEDTLS_PLATFORM_C + * + * Enable this layer to allow use of alternative memory allocators. + */ +//#define MBEDTLS_PLATFORM_MEMORY + +/** + * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS + * + * Do not assign standard functions in the platform layer (e.g. calloc() to + * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF) + * + * This makes sure there are no linking errors on platforms that do not support + * these functions. You will HAVE to provide alternatives, either at runtime + * via the platform_set_xxx() functions or at compile time by setting + * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a + * MBEDTLS_PLATFORM_XXX_MACRO. + * + * Requires: MBEDTLS_PLATFORM_C + * + * Uncomment to prevent default assignment of standard functions in the + * platform layer. + */ +//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS + +/** + * \def MBEDTLS_PLATFORM_EXIT_ALT + * + * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the + * function in the platform abstraction layer. + * + * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will + * provide a function "mbedtls_platform_set_printf()" that allows you to set an + * alternative printf function pointer. + * + * All these define require MBEDTLS_PLATFORM_C to be defined! + * + * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows; + * it will be enabled automatically by check_config.h + * + * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as + * MBEDTLS_PLATFORM_XXX_MACRO! + * + * Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME + * + * Uncomment a macro to enable alternate implementation of specific base + * platform function + */ +//#define MBEDTLS_PLATFORM_EXIT_ALT +//#define MBEDTLS_PLATFORM_TIME_ALT +//#define MBEDTLS_PLATFORM_FPRINTF_ALT +//#define MBEDTLS_PLATFORM_PRINTF_ALT +//#define MBEDTLS_PLATFORM_SNPRINTF_ALT +//#define MBEDTLS_PLATFORM_NV_SEED_ALT +//#define MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT + +/** + * \def MBEDTLS_DEPRECATED_WARNING + * + * Mark deprecated functions so that they generate a warning if used. + * Functions deprecated in one version will usually be removed in the next + * version. You can enable this to help you prepare the transition to a new + * major version by making sure your code is not using these functions. + * + * This only works with GCC and Clang. With other compilers, you may want to + * use MBEDTLS_DEPRECATED_REMOVED + * + * Uncomment to get warnings on using deprecated functions. + */ +//#define MBEDTLS_DEPRECATED_WARNING + +/** + * \def MBEDTLS_DEPRECATED_REMOVED + * + * Remove deprecated functions so that they generate an error if used. + * Functions deprecated in one version will usually be removed in the next + * version. You can enable this to help you prepare the transition to a new + * major version by making sure your code is not using these functions. + * + * Uncomment to get errors on using deprecated functions. + */ +//#define MBEDTLS_DEPRECATED_REMOVED + +/** + * \def MBEDTLS_CHECK_PARAMS + * + * This configuration option controls whether the library validates more of + * the parameters passed to it. + * + * When this flag is not defined, the library only attempts to validate an + * input parameter if: (1) they may come from the outside world (such as the + * network, the filesystem, etc.) or (2) not validating them could result in + * internal memory errors such as overflowing a buffer controlled by the + * library. On the other hand, it doesn't attempt to validate parameters whose + * values are fully controlled by the application (such as pointers). + * + * When this flag is defined, the library additionally attempts to validate + * parameters that are fully controlled by the application, and should always + * be valid if the application code is fully correct and trusted. + * + * For example, when a function accepts as input a pointer to a buffer that may + * contain untrusted data, and its documentation mentions that this pointer + * must not be NULL: + * - the pointer is checked to be non-NULL only if this option is enabled + * - the content of the buffer is always validated + * + * When this flag is defined, if a library function receives a parameter that + * is invalid, it will: + * - invoke the macro MBEDTLS_PARAM_FAILED() which by default expands to a + * call to the function mbedtls_param_failed() + * - immediately return (with a specific error code unless the function + * returns void and can't communicate an error). + * + * When defining this flag, you also need to: + * - either provide a definition of the function mbedtls_param_failed() in + * your application (see platform_util.h for its prototype) as the library + * calls that function, but does not provide a default definition for it, + * - or provide a different definition of the macro MBEDTLS_PARAM_FAILED() + * below if the above mechanism is not flexible enough to suit your needs. + * See the documentation of this macro later in this file. + * + * Uncomment to enable validation of application-controlled parameters. + */ +//#define MBEDTLS_CHECK_PARAMS + +/* \} name SECTION: System support */ + +/** + * \name SECTION: mbed TLS feature support + * + * This section sets support for features that are or are not needed + * within the modules that are enabled. + * \{ + */ + +/** + * \def MBEDTLS_TIMING_ALT + * + * Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(), + * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay() + * + * Only works if you have MBEDTLS_TIMING_C enabled. + * + * You will need to provide a header "timing_alt.h" and an implementation at + * compile time. + */ +//#define MBEDTLS_TIMING_ALT + +/** + * \def MBEDTLS_AES_ALT + * + * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your + * alternate core implementation of a symmetric crypto, an arithmetic or hash + * module (e.g. platform specific assembly optimized implementations). Keep + * in mind that the function prototypes should remain the same. + * + * This replaces the whole module. If you only want to replace one of the + * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags. + * + * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer + * provide the "struct mbedtls_aes_context" definition and omit the base + * function declarations and implementations. "aes_alt.h" will be included from + * "aes.h" to include the new function definitions. + * + * Uncomment a macro to enable alternate implementation of the corresponding + * module. + * + * \warning MD2, MD4, MD5, ARC4, DES and SHA-1 are considered weak and their + * use constitutes a security risk. If possible, we recommend + * avoiding dependencies on them, and considering stronger message + * digests and ciphers instead. + * + */ +//#define MBEDTLS_AES_ALT +//#define MBEDTLS_ARC4_ALT +//#define MBEDTLS_ARIA_ALT +//#define MBEDTLS_BLOWFISH_ALT +//#define MBEDTLS_CAMELLIA_ALT +//#define MBEDTLS_CCM_ALT +//#define MBEDTLS_CHACHA20_ALT +//#define MBEDTLS_CHACHAPOLY_ALT +//#define MBEDTLS_CMAC_ALT +//#define MBEDTLS_DES_ALT +//#define MBEDTLS_DHM_ALT +//#define MBEDTLS_ECJPAKE_ALT +//#define MBEDTLS_GCM_ALT +//#define MBEDTLS_NIST_KW_ALT +//#define MBEDTLS_MD2_ALT +//#define MBEDTLS_MD4_ALT +//#define MBEDTLS_MD5_ALT +//#define MBEDTLS_POLY1305_ALT +//#define MBEDTLS_RIPEMD160_ALT +//#define MBEDTLS_RSA_ALT +//#define MBEDTLS_SHA1_ALT +//#define MBEDTLS_SHA256_ALT +//#define MBEDTLS_SHA512_ALT +//#define MBEDTLS_XTEA_ALT + +/* + * When replacing the elliptic curve module, pleace consider, that it is + * implemented with two .c files: + * - ecp.c + * - ecp_curves.c + * You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT + * macros as described above. The only difference is that you have to make sure + * that you provide functionality for both .c files. + */ +//#define MBEDTLS_ECP_ALT + +/** + * \def MBEDTLS_MD2_PROCESS_ALT + * + * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you + * alternate core implementation of symmetric crypto or hash function. Keep in + * mind that function prototypes should remain the same. + * + * This replaces only one function. The header file from mbed TLS is still + * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags. + * + * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will + * no longer provide the mbedtls_sha1_process() function, but it will still provide + * the other function (using your mbedtls_sha1_process() function) and the definition + * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible + * with this definition. + * + * \note Because of a signature change, the core AES encryption and decryption routines are + * currently named mbedtls_aes_internal_encrypt and mbedtls_aes_internal_decrypt, + * respectively. When setting up alternative implementations, these functions should + * be overriden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt + * must stay untouched. + * + * \note If you use the AES_xxx_ALT macros, then is is recommended to also set + * MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES + * tables. + * + * Uncomment a macro to enable alternate implementation of the corresponding + * function. + * + * \warning MD2, MD4, MD5, DES and SHA-1 are considered weak and their use + * constitutes a security risk. If possible, we recommend avoiding + * dependencies on them, and considering stronger message digests + * and ciphers instead. + * + */ +//#define MBEDTLS_MD2_PROCESS_ALT +//#define MBEDTLS_MD4_PROCESS_ALT +//#define MBEDTLS_MD5_PROCESS_ALT +//#define MBEDTLS_RIPEMD160_PROCESS_ALT +//#define MBEDTLS_SHA1_PROCESS_ALT +//#define MBEDTLS_SHA256_PROCESS_ALT +//#define MBEDTLS_SHA512_PROCESS_ALT +//#define MBEDTLS_DES_SETKEY_ALT +//#define MBEDTLS_DES_CRYPT_ECB_ALT +//#define MBEDTLS_DES3_CRYPT_ECB_ALT +//#define MBEDTLS_AES_SETKEY_ENC_ALT +//#define MBEDTLS_AES_SETKEY_DEC_ALT +//#define MBEDTLS_AES_ENCRYPT_ALT +//#define MBEDTLS_AES_DECRYPT_ALT +//#define MBEDTLS_ECDH_GEN_PUBLIC_ALT +//#define MBEDTLS_ECDH_COMPUTE_SHARED_ALT +//#define MBEDTLS_ECDSA_VERIFY_ALT +//#define MBEDTLS_ECDSA_SIGN_ALT +//#define MBEDTLS_ECDSA_GENKEY_ALT + +/** + * \def MBEDTLS_ECP_INTERNAL_ALT + * + * Expose a part of the internal interface of the Elliptic Curve Point module. + * + * MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use your + * alternative core implementation of elliptic curve arithmetic. Keep in mind + * that function prototypes should remain the same. + * + * This partially replaces one function. The header file from mbed TLS is still + * used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation + * is still present and it is used for group structures not supported by the + * alternative. + * + * Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT + * and implementing the following functions: + * unsigned char mbedtls_internal_ecp_grp_capable( + * const mbedtls_ecp_group *grp ) + * int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp ) + * void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp ) + * The mbedtls_internal_ecp_grp_capable function should return 1 if the + * replacement functions implement arithmetic for the given group and 0 + * otherwise. + * The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_free are + * called before and after each point operation and provide an opportunity to + * implement optimized set up and tear down instructions. + * + * Example: In case you uncomment MBEDTLS_ECP_INTERNAL_ALT and + * MBEDTLS_ECP_DOUBLE_JAC_ALT, mbed TLS will still provide the ecp_double_jac + * function, but will use your mbedtls_internal_ecp_double_jac if the group is + * supported (your mbedtls_internal_ecp_grp_capable function returns 1 when + * receives it as an argument). If the group is not supported then the original + * implementation is used. The other functions and the definition of + * mbedtls_ecp_group and mbedtls_ecp_point will not change, so your + * implementation of mbedtls_internal_ecp_double_jac and + * mbedtls_internal_ecp_grp_capable must be compatible with this definition. + * + * Uncomment a macro to enable alternate implementation of the corresponding + * function. + */ +/* Required for all the functions in this section */ +//#define MBEDTLS_ECP_INTERNAL_ALT +/* Support for Weierstrass curves with Jacobi representation */ +//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT +//#define MBEDTLS_ECP_ADD_MIXED_ALT +//#define MBEDTLS_ECP_DOUBLE_JAC_ALT +//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT +//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT +/* Support for curves with Montgomery arithmetic */ +//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT +//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT +//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT + +/** + * \def MBEDTLS_TEST_NULL_ENTROPY + * + * Enables testing and use of mbed TLS without any configured entropy sources. + * This permits use of the library on platforms before an entropy source has + * been integrated (see for example the MBEDTLS_ENTROPY_HARDWARE_ALT or the + * MBEDTLS_ENTROPY_NV_SEED switches). + * + * WARNING! This switch MUST be disabled in production builds, and is suitable + * only for development. + * Enabling the switch negates any security provided by the library. + * + * Requires MBEDTLS_ENTROPY_C, MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES + * + */ +//#define MBEDTLS_TEST_NULL_ENTROPY + +/** + * \def MBEDTLS_ENTROPY_HARDWARE_ALT + * + * Uncomment this macro to let mbed TLS use your own implementation of a + * hardware entropy collector. + * + * Your function must be called \c mbedtls_hardware_poll(), have the same + * prototype as declared in entropy_poll.h, and accept NULL as first argument. + * + * Uncomment to use your own hardware entropy collector. + */ +//#define MBEDTLS_ENTROPY_HARDWARE_ALT + +/** + * \def MBEDTLS_AES_ROM_TABLES + * + * Use precomputed AES tables stored in ROM. + * + * Uncomment this macro to use precomputed AES tables stored in ROM. + * Comment this macro to generate AES tables in RAM at runtime. + * + * Tradeoff: Using precomputed ROM tables reduces RAM usage by ~8kb + * (or ~2kb if \c MBEDTLS_AES_FEWER_TABLES is used) and reduces the + * initialization time before the first AES operation can be performed. + * It comes at the cost of additional ~8kb ROM use (resp. ~2kb if \c + * MBEDTLS_AES_FEWER_TABLES below is used), and potentially degraded + * performance if ROM access is slower than RAM access. + * + * This option is independent of \c MBEDTLS_AES_FEWER_TABLES. + * + */ +//#define MBEDTLS_AES_ROM_TABLES + +/** + * \def MBEDTLS_AES_FEWER_TABLES + * + * Use less ROM/RAM for AES tables. + * + * Uncommenting this macro omits 75% of the AES tables from + * ROM / RAM (depending on the value of \c MBEDTLS_AES_ROM_TABLES) + * by computing their values on the fly during operations + * (the tables are entry-wise rotations of one another). + * + * Tradeoff: Uncommenting this reduces the RAM / ROM footprint + * by ~6kb but at the cost of more arithmetic operations during + * runtime. Specifically, one has to compare 4 accesses within + * different tables to 4 accesses with additional arithmetic + * operations within the same table. The performance gain/loss + * depends on the system and memory details. + * + * This option is independent of \c MBEDTLS_AES_ROM_TABLES. + * + */ +//#define MBEDTLS_AES_FEWER_TABLES + +/** + * \def MBEDTLS_CAMELLIA_SMALL_MEMORY + * + * Use less ROM for the Camellia implementation (saves about 768 bytes). + * + * Uncomment this macro to use less memory for Camellia. + */ +//#define MBEDTLS_CAMELLIA_SMALL_MEMORY + +/** + * \def MBEDTLS_CIPHER_MODE_CBC + * + * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. + */ +#define MBEDTLS_CIPHER_MODE_CBC + +/** + * \def MBEDTLS_CIPHER_MODE_CFB + * + * Enable Cipher Feedback mode (CFB) for symmetric ciphers. + */ +#define MBEDTLS_CIPHER_MODE_CFB + +/** + * \def MBEDTLS_CIPHER_MODE_CTR + * + * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. + */ +#define MBEDTLS_CIPHER_MODE_CTR + +/** + * \def MBEDTLS_CIPHER_MODE_OFB + * + * Enable Output Feedback mode (OFB) for symmetric ciphers. + */ +#define MBEDTLS_CIPHER_MODE_OFB + +/** + * \def MBEDTLS_CIPHER_MODE_XTS + * + * Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES. + */ +#define MBEDTLS_CIPHER_MODE_XTS + +/** + * \def MBEDTLS_CIPHER_NULL_CIPHER + * + * Enable NULL cipher. + * Warning: Only do so when you know what you are doing. This allows for + * encryption or channels without any security! + * + * Requires MBEDTLS_ENABLE_WEAK_CIPHERSUITES as well to enable + * the following ciphersuites: + * MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA + * MBEDTLS_TLS_RSA_WITH_NULL_SHA256 + * MBEDTLS_TLS_RSA_WITH_NULL_SHA + * MBEDTLS_TLS_RSA_WITH_NULL_MD5 + * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA + * MBEDTLS_TLS_PSK_WITH_NULL_SHA384 + * MBEDTLS_TLS_PSK_WITH_NULL_SHA256 + * MBEDTLS_TLS_PSK_WITH_NULL_SHA + * + * Uncomment this macro to enable the NULL cipher and ciphersuites + */ +//#define MBEDTLS_CIPHER_NULL_CIPHER + +/** + * \def MBEDTLS_CIPHER_PADDING_PKCS7 + * + * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for + * specific padding modes in the cipher layer with cipher modes that support + * padding (e.g. CBC) + * + * If you disable all padding modes, only full blocks can be used with CBC. + * + * Enable padding modes in the cipher layer. + */ +#define MBEDTLS_CIPHER_PADDING_PKCS7 +#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS +#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN +#define MBEDTLS_CIPHER_PADDING_ZEROS + +/** + * \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES + * + * Enable weak ciphersuites in SSL / TLS. + * Warning: Only do so when you know what you are doing. This allows for + * channels with virtually no security at all! + * + * This enables the following ciphersuites: + * MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA + * + * Uncomment this macro to enable weak ciphersuites + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers instead. + */ +//#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES + +/** + * \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES + * + * Remove RC4 ciphersuites by default in SSL / TLS. + * This flag removes the ciphersuites based on RC4 from the default list as + * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to + * enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them + * explicitly. + * + * Uncomment this macro to remove RC4 ciphersuites by default. + */ +#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES + +/** + * \def MBEDTLS_REMOVE_3DES_CIPHERSUITES + * + * Remove 3DES ciphersuites by default in SSL / TLS. + * This flag removes the ciphersuites based on 3DES from the default list as + * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible + * to enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including + * them explicitly. + * + * A man-in-the-browser attacker can recover authentication tokens sent through + * a TLS connection using a 3DES based cipher suite (see "On the Practical + * (In-)Security of 64-bit Block Ciphers" by Karthikeyan Bhargavan and Gaëtan + * Leurent, see https://sweet32.info/SWEET32_CCS16.pdf). If this attack falls + * in your threat model or you are unsure, then you should keep this option + * enabled to remove 3DES based cipher suites. + * + * Comment this macro to keep 3DES in the default ciphersuite list. + */ +#define MBEDTLS_REMOVE_3DES_CIPHERSUITES + +/** + * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED + * + * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve + * module. By default all supported curves are enabled. + * + * Comment macros to disable the curve and functions for it + */ +#define MBEDTLS_ECP_DP_SECP192R1_ENABLED +#define MBEDTLS_ECP_DP_SECP224R1_ENABLED +#define MBEDTLS_ECP_DP_SECP256R1_ENABLED +#define MBEDTLS_ECP_DP_SECP384R1_ENABLED +#define MBEDTLS_ECP_DP_SECP521R1_ENABLED +#define MBEDTLS_ECP_DP_SECP192K1_ENABLED +#define MBEDTLS_ECP_DP_SECP224K1_ENABLED +#define MBEDTLS_ECP_DP_SECP256K1_ENABLED +#define MBEDTLS_ECP_DP_BP256R1_ENABLED +#define MBEDTLS_ECP_DP_BP384R1_ENABLED +#define MBEDTLS_ECP_DP_BP512R1_ENABLED +#define MBEDTLS_ECP_DP_CURVE25519_ENABLED +#define MBEDTLS_ECP_DP_CURVE448_ENABLED + +/** + * \def MBEDTLS_ECP_NIST_OPTIM + * + * Enable specific 'modulo p' routines for each NIST prime. + * Depending on the prime and architecture, makes operations 4 to 8 times + * faster on the corresponding curve. + * + * Comment this macro to disable NIST curves optimisation. + */ +#define MBEDTLS_ECP_NIST_OPTIM + +/** + * \def MBEDTLS_ECP_RESTARTABLE + * + * Enable "non-blocking" ECC operations that can return early and be resumed. + * + * This allows various functions to pause by returning + * #MBEDTLS_ERR_ECP_IN_PROGRESS (or, for functions in the SSL module, + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS) and then be called later again in + * order to further progress and eventually complete their operation. This is + * controlled through mbedtls_ecp_set_max_ops() which limits the maximum + * number of ECC operations a function may perform before pausing; see + * mbedtls_ecp_set_max_ops() for more information. + * + * This is useful in non-threaded environments if you want to avoid blocking + * for too long on ECC (and, hence, X.509 or SSL/TLS) operations. + * + * Uncomment this macro to enable restartable ECC computations. + * + * \note This option only works with the default software implementation of + * elliptic curve functionality. It is incompatible with + * MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT and MBEDTLS_ECDSA_XXX_ALT. + */ +//#define MBEDTLS_ECP_RESTARTABLE + +/** + * \def MBEDTLS_ECDSA_DETERMINISTIC + * + * Enable deterministic ECDSA (RFC 6979). + * Standard ECDSA is "fragile" in the sense that lack of entropy when signing + * may result in a compromise of the long-term signing key. This is avoided by + * the deterministic variant. + * + * Requires: MBEDTLS_HMAC_DRBG_C + * + * Comment this macro to disable deterministic ECDSA. + */ +#define MBEDTLS_ECDSA_DETERMINISTIC + +/** + * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED + * + * Enable the PSK based ciphersuite modes in SSL / TLS. + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED + * + * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_DHM_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA + * + * \warning Using DHE constitutes a security risk as it + * is not possible to validate custom DH parameters. + * If possible, it is recommended users should consider + * preferring other methods of key exchange. + * See dhm.h for more details. + * + */ +#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED + * + * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED + * + * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, + * MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED + * + * Enable the RSA-only based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, + * MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 + */ +#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED + * + * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, + * MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA + * + * \warning Using DHE constitutes a security risk as it + * is not possible to validate custom DH parameters. + * If possible, it is recommended users should consider + * preferring other methods of key exchange. + * See dhm.h for more details. + * + */ +#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED + * + * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, + * MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED + * + * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C, + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA + */ +#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED + * + * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + */ +#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED + * + * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. + * + * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 + */ +#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED + +/** + * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED + * + * Enable the ECJPAKE based ciphersuite modes in SSL / TLS. + * + * \warning This is currently experimental. EC J-PAKE support is based on the + * Thread v1.0.0 specification; incompatible changes to the specification + * might still happen. For this reason, this is disabled by default. + * + * Requires: MBEDTLS_ECJPAKE_C + * MBEDTLS_SHA256_C + * MBEDTLS_ECP_DP_SECP256R1_ENABLED + * + * This enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 + */ +//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED + +/** + * \def MBEDTLS_PK_PARSE_EC_EXTENDED + * + * Enhance support for reading EC keys using variants of SEC1 not allowed by + * RFC 5915 and RFC 5480. + * + * Currently this means parsing the SpecifiedECDomain choice of EC + * parameters (only known groups are supported, not arbitrary domains, to + * avoid validation issues). + * + * Disable if you only need to support RFC 5915 + 5480 key formats. + */ +#define MBEDTLS_PK_PARSE_EC_EXTENDED + +/** + * \def MBEDTLS_ERROR_STRERROR_DUMMY + * + * Enable a dummy error function to make use of mbedtls_strerror() in + * third party libraries easier when MBEDTLS_ERROR_C is disabled + * (no effect when MBEDTLS_ERROR_C is enabled). + * + * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're + * not using mbedtls_strerror() or error_strerror() in your application. + * + * Disable if you run into name conflicts and want to really remove the + * mbedtls_strerror() + */ +#define MBEDTLS_ERROR_STRERROR_DUMMY + +/** + * \def MBEDTLS_GENPRIME + * + * Enable the prime-number generation code. + * + * Requires: MBEDTLS_BIGNUM_C + */ +#define MBEDTLS_GENPRIME + +/** + * \def MBEDTLS_FS_IO + * + * Enable functions that use the filesystem. + */ +#define MBEDTLS_FS_IO + +/** + * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES + * + * Do not add default entropy sources. These are the platform specific, + * mbedtls_timing_hardclock and HAVEGE based poll functions. + * + * This is useful to have more control over the added entropy sources in an + * application. + * + * Uncomment this macro to prevent loading of default entropy functions. + */ +//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES + +/** + * \def MBEDTLS_NO_PLATFORM_ENTROPY + * + * Do not use built-in platform entropy functions. + * This is useful if your platform does not support + * standards like the /dev/urandom or Windows CryptoAPI. + * + * Uncomment this macro to disable the built-in platform entropy functions. + */ +//#define MBEDTLS_NO_PLATFORM_ENTROPY + +/** + * \def MBEDTLS_ENTROPY_FORCE_SHA256 + * + * Force the entropy accumulator to use a SHA-256 accumulator instead of the + * default SHA-512 based one (if both are available). + * + * Requires: MBEDTLS_SHA256_C + * + * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option + * if you have performance concerns. + * + * This option is only useful if both MBEDTLS_SHA256_C and + * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used. + */ +//#define MBEDTLS_ENTROPY_FORCE_SHA256 + +/** + * \def MBEDTLS_ENTROPY_NV_SEED + * + * Enable the non-volatile (NV) seed file-based entropy source. + * (Also enables the NV seed read/write functions in the platform layer) + * + * This is crucial (if not required) on systems that do not have a + * cryptographic entropy source (in hardware or kernel) available. + * + * Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C + * + * \note The read/write functions that are used by the entropy source are + * determined in the platform layer, and can be modified at runtime and/or + * compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used. + * + * \note If you use the default implementation functions that read a seedfile + * with regular fopen(), please make sure you make a seedfile with the + * proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at + * least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from + * and written to or you will get an entropy source error! The default + * implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE + * bytes from the file. + * + * \note The entropy collector will write to the seed file before entropy is + * given to an external source, to update it. + */ +//#define MBEDTLS_ENTROPY_NV_SEED + +/** + * \def MBEDTLS_MEMORY_DEBUG + * + * Enable debugging of buffer allocator memory issues. Automatically prints + * (to stderr) all (fatal) messages on memory allocation issues. Enables + * function for 'debug output' of allocated memory. + * + * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C + * + * Uncomment this macro to let the buffer allocator print out error messages. + */ +//#define MBEDTLS_MEMORY_DEBUG + +/** + * \def MBEDTLS_MEMORY_BACKTRACE + * + * Include backtrace information with each allocated block. + * + * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C + * GLIBC-compatible backtrace() an backtrace_symbols() support + * + * Uncomment this macro to include backtrace information + */ +//#define MBEDTLS_MEMORY_BACKTRACE + +/** + * \def MBEDTLS_PK_RSA_ALT_SUPPORT + * + * Support external private RSA keys (eg from a HSM) in the PK layer. + * + * Comment this macro to disable support for external private RSA keys. + */ +#define MBEDTLS_PK_RSA_ALT_SUPPORT + +/** + * \def MBEDTLS_PKCS1_V15 + * + * Enable support for PKCS#1 v1.5 encoding. + * + * Requires: MBEDTLS_RSA_C + * + * This enables support for PKCS#1 v1.5 operations. + */ +#define MBEDTLS_PKCS1_V15 + +/** + * \def MBEDTLS_PKCS1_V21 + * + * Enable support for PKCS#1 v2.1 encoding. + * + * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C + * + * This enables support for RSAES-OAEP and RSASSA-PSS operations. + */ +#define MBEDTLS_PKCS1_V21 + +/** + * \def MBEDTLS_RSA_NO_CRT + * + * Do not use the Chinese Remainder Theorem + * for the RSA private operation. + * + * Uncomment this macro to disable the use of CRT in RSA. + * + */ +//#define MBEDTLS_RSA_NO_CRT + +/** + * \def MBEDTLS_SELF_TEST + * + * Enable the checkup functions (*_self_test). + */ +#define MBEDTLS_SELF_TEST + +/** + * \def MBEDTLS_SHA256_SMALLER + * + * Enable an implementation of SHA-256 that has lower ROM footprint but also + * lower performance. + * + * The default implementation is meant to be a reasonnable compromise between + * performance and size. This version optimizes more aggressively for size at + * the expense of performance. Eg on Cortex-M4 it reduces the size of + * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about + * 30%. + * + * Uncomment to enable the smaller implementation of SHA256. + */ +//#define MBEDTLS_SHA256_SMALLER + +/** + * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES + * + * Enable sending of alert messages in case of encountered errors as per RFC. + * If you choose not to send the alert messages, mbed TLS can still communicate + * with other servers, only debugging of failures is harder. + * + * The advantage of not sending alert messages, is that no information is given + * about reasons for failures thus preventing adversaries of gaining intel. + * + * Enable sending of all alert messages + */ +#define MBEDTLS_SSL_ALL_ALERT_MESSAGES + +/** + * \def MBEDTLS_SSL_ASYNC_PRIVATE + * + * Enable asynchronous external private key operations in SSL. This allows + * you to configure an SSL connection to call an external cryptographic + * module to perform private key operations instead of performing the + * operation inside the library. + * + */ +//#define MBEDTLS_SSL_ASYNC_PRIVATE + +/** + * \def MBEDTLS_SSL_DEBUG_ALL + * + * Enable the debug messages in SSL module for all issues. + * Debug messages have been disabled in some places to prevent timing + * attacks due to (unbalanced) debugging function calls. + * + * If you need all error reporting you should enable this during debugging, + * but remove this for production servers that should log as well. + * + * Uncomment this macro to report all debug messages on errors introducing + * a timing side-channel. + * + */ +//#define MBEDTLS_SSL_DEBUG_ALL + +/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC + * + * Enable support for Encrypt-then-MAC, RFC 7366. + * + * This allows peers that both support it to use a more robust protection for + * ciphersuites using CBC, providing deep resistance against timing attacks + * on the padding or underlying cipher. + * + * This only affects CBC ciphersuites, and is useless if none is defined. + * + * Requires: MBEDTLS_SSL_PROTO_TLS1 or + * MBEDTLS_SSL_PROTO_TLS1_1 or + * MBEDTLS_SSL_PROTO_TLS1_2 + * + * Comment this macro to disable support for Encrypt-then-MAC + */ +#define MBEDTLS_SSL_ENCRYPT_THEN_MAC + +/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET + * + * Enable support for Extended Master Secret, aka Session Hash + * (draft-ietf-tls-session-hash-02). + * + * This was introduced as "the proper fix" to the Triple Handshake familiy of + * attacks, but it is recommended to always use it (even if you disable + * renegotiation), since it actually fixes a more fundamental issue in the + * original SSL/TLS design, and has implications beyond Triple Handshake. + * + * Requires: MBEDTLS_SSL_PROTO_TLS1 or + * MBEDTLS_SSL_PROTO_TLS1_1 or + * MBEDTLS_SSL_PROTO_TLS1_2 + * + * Comment this macro to disable support for Extended Master Secret. + */ +#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET + +/** + * \def MBEDTLS_SSL_FALLBACK_SCSV + * + * Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00). + * + * For servers, it is recommended to always enable this, unless you support + * only one version of TLS, or know for sure that none of your clients + * implements a fallback strategy. + * + * For clients, you only need this if you're using a fallback strategy, which + * is not recommended in the first place, unless you absolutely need it to + * interoperate with buggy (version-intolerant) servers. + * + * Comment this macro to disable support for FALLBACK_SCSV + */ +#define MBEDTLS_SSL_FALLBACK_SCSV + +/** + * \def MBEDTLS_SSL_HW_RECORD_ACCEL + * + * Enable hooking functions in SSL module for hardware acceleration of + * individual records. + * + * Uncomment this macro to enable hooking functions. + */ +//#define MBEDTLS_SSL_HW_RECORD_ACCEL + +/** + * \def MBEDTLS_SSL_CBC_RECORD_SPLITTING + * + * Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0. + * + * This is a countermeasure to the BEAST attack, which also minimizes the risk + * of interoperability issues compared to sending 0-length records. + * + * Comment this macro to disable 1/n-1 record splitting. + */ +#define MBEDTLS_SSL_CBC_RECORD_SPLITTING + +/** + * \def MBEDTLS_SSL_RENEGOTIATION + * + * Enable support for TLS renegotiation. + * + * The two main uses of renegotiation are (1) refresh keys on long-lived + * connections and (2) client authentication after the initial handshake. + * If you don't need renegotiation, it's probably better to disable it, since + * it has been associated with security issues in the past and is easy to + * misuse/misunderstand. + * + * Comment this to disable support for renegotiation. + * + * \note Even if this option is disabled, both client and server are aware + * of the Renegotiation Indication Extension (RFC 5746) used to + * prevent the SSL renegotiation attack (see RFC 5746 Sect. 1). + * (See \c mbedtls_ssl_conf_legacy_renegotiation for the + * configuration of this extension). + * + */ +#define MBEDTLS_SSL_RENEGOTIATION + +/** + * \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO + * + * Enable support for receiving and parsing SSLv2 Client Hello messages for the + * SSL Server module (MBEDTLS_SSL_SRV_C). + * + * Uncomment this macro to enable support for SSLv2 Client Hello messages. + */ +//#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO + +/** + * \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE + * + * Pick the ciphersuite according to the client's preferences rather than ours + * in the SSL Server module (MBEDTLS_SSL_SRV_C). + * + * Uncomment this macro to respect client's ciphersuite order + */ +//#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE + +/** + * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH + * + * Enable support for RFC 6066 max_fragment_length extension in SSL. + * + * Comment this macro to disable support for the max_fragment_length extension + */ +#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH + +/** + * \def MBEDTLS_SSL_PROTO_SSL3 + * + * Enable support for SSL 3.0. + * + * Requires: MBEDTLS_MD5_C + * MBEDTLS_SHA1_C + * + * Comment this macro to disable support for SSL 3.0 + */ +//#define MBEDTLS_SSL_PROTO_SSL3 + +/** + * \def MBEDTLS_SSL_PROTO_TLS1 + * + * Enable support for TLS 1.0. + * + * Requires: MBEDTLS_MD5_C + * MBEDTLS_SHA1_C + * + * Comment this macro to disable support for TLS 1.0 + */ +#define MBEDTLS_SSL_PROTO_TLS1 + +/** + * \def MBEDTLS_SSL_PROTO_TLS1_1 + * + * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled). + * + * Requires: MBEDTLS_MD5_C + * MBEDTLS_SHA1_C + * + * Comment this macro to disable support for TLS 1.1 / DTLS 1.0 + */ +#define MBEDTLS_SSL_PROTO_TLS1_1 + +/** + * \def MBEDTLS_SSL_PROTO_TLS1_2 + * + * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled). + * + * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C + * (Depends on ciphersuites) + * + * Comment this macro to disable support for TLS 1.2 / DTLS 1.2 + */ +#define MBEDTLS_SSL_PROTO_TLS1_2 + +/** + * \def MBEDTLS_SSL_PROTO_DTLS + * + * Enable support for DTLS (all available versions). + * + * Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0, + * and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2. + * + * Requires: MBEDTLS_SSL_PROTO_TLS1_1 + * or MBEDTLS_SSL_PROTO_TLS1_2 + * + * Comment this macro to disable support for DTLS + */ +#define MBEDTLS_SSL_PROTO_DTLS + +/** + * \def MBEDTLS_SSL_ALPN + * + * Enable support for RFC 7301 Application Layer Protocol Negotiation. + * + * Comment this macro to disable support for ALPN. + */ +#define MBEDTLS_SSL_ALPN + +/** + * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY + * + * Enable support for the anti-replay mechanism in DTLS. + * + * Requires: MBEDTLS_SSL_TLS_C + * MBEDTLS_SSL_PROTO_DTLS + * + * \warning Disabling this is often a security risk! + * See mbedtls_ssl_conf_dtls_anti_replay() for details. + * + * Comment this to disable anti-replay in DTLS. + */ +#define MBEDTLS_SSL_DTLS_ANTI_REPLAY + +/** + * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY + * + * Enable support for HelloVerifyRequest on DTLS servers. + * + * This feature is highly recommended to prevent DTLS servers being used as + * amplifiers in DoS attacks against other hosts. It should always be enabled + * unless you know for sure amplification cannot be a problem in the + * environment in which your server operates. + * + * \warning Disabling this can ba a security risk! (see above) + * + * Requires: MBEDTLS_SSL_PROTO_DTLS + * + * Comment this to disable support for HelloVerifyRequest. + */ +#define MBEDTLS_SSL_DTLS_HELLO_VERIFY + +/** + * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE + * + * Enable server-side support for clients that reconnect from the same port. + * + * Some clients unexpectedly close the connection and try to reconnect using the + * same source port. This needs special support from the server to handle the + * new connection securely, as described in section 4.2.8 of RFC 6347. This + * flag enables that support. + * + * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY + * + * Comment this to disable support for clients reusing the source port. + */ +#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE + +/** + * \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT + * + * Enable support for a limit of records with bad MAC. + * + * See mbedtls_ssl_conf_dtls_badmac_limit(). + * + * Requires: MBEDTLS_SSL_PROTO_DTLS + */ +#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT + +/** + * \def MBEDTLS_SSL_SESSION_TICKETS + * + * Enable support for RFC 5077 session tickets in SSL. + * Client-side, provides full support for session tickets (maintainance of a + * session store remains the responsibility of the application, though). + * Server-side, you also need to provide callbacks for writing and parsing + * tickets, including authenticated encryption and key management. Example + * callbacks are provided by MBEDTLS_SSL_TICKET_C. + * + * Comment this macro to disable support for SSL session tickets + */ +#define MBEDTLS_SSL_SESSION_TICKETS + +/** + * \def MBEDTLS_SSL_EXPORT_KEYS + * + * Enable support for exporting key block and master secret. + * This is required for certain users of TLS, e.g. EAP-TLS. + * + * Comment this macro to disable support for key export + */ +#define MBEDTLS_SSL_EXPORT_KEYS + +/** + * \def MBEDTLS_SSL_SERVER_NAME_INDICATION + * + * Enable support for RFC 6066 server name indication (SNI) in SSL. + * + * Requires: MBEDTLS_X509_CRT_PARSE_C + * + * Comment this macro to disable support for server name indication in SSL + */ +#define MBEDTLS_SSL_SERVER_NAME_INDICATION + +/** + * \def MBEDTLS_SSL_TRUNCATED_HMAC + * + * Enable support for RFC 6066 truncated HMAC in SSL. + * + * Comment this macro to disable support for truncated HMAC in SSL + */ +#define MBEDTLS_SSL_TRUNCATED_HMAC + +/** + * \def MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT + * + * Fallback to old (pre-2.7), non-conforming implementation of the truncated + * HMAC extension which also truncates the HMAC key. Note that this option is + * only meant for a transitory upgrade period and is likely to be removed in + * a future version of the library. + * + * \warning The old implementation is non-compliant and has a security weakness + * (2^80 brute force attack on the HMAC key used for a single, + * uninterrupted connection). This should only be enabled temporarily + * when (1) the use of truncated HMAC is essential in order to save + * bandwidth, and (2) the peer is an Mbed TLS stack that doesn't use + * the fixed implementation yet (pre-2.7). + * + * \deprecated This option is deprecated and will likely be removed in a + * future version of Mbed TLS. + * + * Uncomment to fallback to old, non-compliant truncated HMAC implementation. + * + * Requires: MBEDTLS_SSL_TRUNCATED_HMAC + */ +//#define MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT + +/** + * \def MBEDTLS_THREADING_ALT + * + * Provide your own alternate threading implementation. + * + * Requires: MBEDTLS_THREADING_C + * + * Uncomment this to allow your own alternate threading implementation. + */ +//#define MBEDTLS_THREADING_ALT + +/** + * \def MBEDTLS_THREADING_PTHREAD + * + * Enable the pthread wrapper layer for the threading layer. + * + * Requires: MBEDTLS_THREADING_C + * + * Uncomment this to enable pthread mutexes. + */ +//#define MBEDTLS_THREADING_PTHREAD + +/** + * \def MBEDTLS_VERSION_FEATURES + * + * Allow run-time checking of compile-time enabled features. Thus allowing users + * to check at run-time if the library is for instance compiled with threading + * support via mbedtls_version_check_feature(). + * + * Requires: MBEDTLS_VERSION_C + * + * Comment this to disable run-time checking and save ROM space + */ +#define MBEDTLS_VERSION_FEATURES + +/** + * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 + * + * If set, the X509 parser will not break-off when parsing an X509 certificate + * and encountering an extension in a v1 or v2 certificate. + * + * Uncomment to prevent an error. + */ +//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 + +/** + * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION + * + * If set, the X509 parser will not break-off when parsing an X509 certificate + * and encountering an unknown critical extension. + * + * \warning Depending on your PKI use, enabling this can be a security risk! + * + * Uncomment to prevent an error. + */ +//#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION + +/** + * \def MBEDTLS_X509_CHECK_KEY_USAGE + * + * Enable verification of the keyUsage extension (CA and leaf certificates). + * + * Disabling this avoids problems with mis-issued and/or misused + * (intermediate) CA and leaf certificates. + * + * \warning Depending on your PKI use, disabling this can be a security risk! + * + * Comment to skip keyUsage checking for both CA and leaf certificates. + */ +#define MBEDTLS_X509_CHECK_KEY_USAGE + +/** + * \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE + * + * Enable verification of the extendedKeyUsage extension (leaf certificates). + * + * Disabling this avoids problems with mis-issued and/or misused certificates. + * + * \warning Depending on your PKI use, disabling this can be a security risk! + * + * Comment to skip extendedKeyUsage checking for certificates. + */ +#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE + +/** + * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT + * + * Enable parsing and verification of X.509 certificates, CRLs and CSRS + * signed with RSASSA-PSS (aka PKCS#1 v2.1). + * + * Comment this macro to disallow using RSASSA-PSS in certificates. + */ +#define MBEDTLS_X509_RSASSA_PSS_SUPPORT + +/** + * \def MBEDTLS_ZLIB_SUPPORT + * + * If set, the SSL/TLS module uses ZLIB to support compression and + * decompression of packet data. + * + * \warning TLS-level compression MAY REDUCE SECURITY! See for example the + * CRIME attack. Before enabling this option, you should examine with care if + * CRIME or similar exploits may be a applicable to your use case. + * + * \note Currently compression can't be used with DTLS. + * + * \deprecated This feature is deprecated and will be removed + * in the next major revision of the library. + * + * Used in: library/ssl_tls.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * This feature requires zlib library and headers to be present. + * + * Uncomment to enable use of ZLIB + */ +//#define MBEDTLS_ZLIB_SUPPORT +/* \} name SECTION: mbed TLS feature support */ + +/** + * \name SECTION: mbed TLS modules + * + * This section enables or disables entire modules in mbed TLS + * \{ + */ + +/** + * \def MBEDTLS_AESNI_C + * + * Enable AES-NI support on x86-64. + * + * Module: library/aesni.c + * Caller: library/aes.c + * + * Requires: MBEDTLS_HAVE_ASM + * + * This modules adds support for the AES-NI instructions on x86-64 + */ +#define MBEDTLS_AESNI_C + +/** + * \def MBEDTLS_AES_C + * + * Enable the AES block cipher. + * + * Module: library/aes.c + * Caller: library/cipher.c + * library/pem.c + * library/ctr_drbg.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA + * + * PEM_PARSE uses AES for decrypting encrypted keys. + */ +#define MBEDTLS_AES_C + +/** + * \def MBEDTLS_ARC4_C + * + * Enable the ARCFOUR stream cipher. + * + * Module: library/arc4.c + * Caller: library/cipher.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA + * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA + * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 + * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA + * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA + * + * \warning ARC4 is considered a weak cipher and its use constitutes a + * security risk. If possible, we recommend avoidng dependencies on + * it, and considering stronger ciphers instead. + * + */ +#define MBEDTLS_ARC4_C + +/** + * \def MBEDTLS_ASN1_PARSE_C + * + * Enable the generic ASN1 parser. + * + * Module: library/asn1.c + * Caller: library/x509.c + * library/dhm.c + * library/pkcs12.c + * library/pkcs5.c + * library/pkparse.c + */ +#define MBEDTLS_ASN1_PARSE_C + +/** + * \def MBEDTLS_ASN1_WRITE_C + * + * Enable the generic ASN1 writer. + * + * Module: library/asn1write.c + * Caller: library/ecdsa.c + * library/pkwrite.c + * library/x509_create.c + * library/x509write_crt.c + * library/x509write_csr.c + */ +#define MBEDTLS_ASN1_WRITE_C + +/** + * \def MBEDTLS_BASE64_C + * + * Enable the Base64 module. + * + * Module: library/base64.c + * Caller: library/pem.c + * + * This module is required for PEM support (required by X.509). + */ +#define MBEDTLS_BASE64_C + +/** + * \def MBEDTLS_BIGNUM_C + * + * Enable the multi-precision integer library. + * + * Module: library/bignum.c + * Caller: library/dhm.c + * library/ecp.c + * library/ecdsa.c + * library/rsa.c + * library/rsa_internal.c + * library/ssl_tls.c + * + * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. + */ +#define MBEDTLS_BIGNUM_C + +/** + * \def MBEDTLS_BLOWFISH_C + * + * Enable the Blowfish block cipher. + * + * Module: library/blowfish.c + */ +#define MBEDTLS_BLOWFISH_C + +/** + * \def MBEDTLS_CAMELLIA_C + * + * Enable the Camellia block cipher. + * + * Module: library/camellia.c + * Caller: library/cipher.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 + */ +#define MBEDTLS_CAMELLIA_C + +/** + * \def MBEDTLS_ARIA_C + * + * Enable the ARIA block cipher. + * + * Module: library/aria.c + * Caller: library/cipher.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * + * MBEDTLS_TLS_RSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_PSK_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_PSK_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384 + * MBEDTLS_TLS_PSK_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_PSK_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256 + * MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384 + * MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256 + * MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384 + */ +//#define MBEDTLS_ARIA_C + +/** + * \def MBEDTLS_CCM_C + * + * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. + * + * Module: library/ccm.c + * + * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C + * + * This module enables the AES-CCM ciphersuites, if other requisites are + * enabled as well. + */ +#define MBEDTLS_CCM_C + +/** + * \def MBEDTLS_CERTS_C + * + * Enable the test certificates. + * + * Module: library/certs.c + * Caller: + * + * This module is used for testing (ssl_client/server). + */ +#define MBEDTLS_CERTS_C + +/** + * \def MBEDTLS_CHACHA20_C + * + * Enable the ChaCha20 stream cipher. + * + * Module: library/chacha20.c + */ +#define MBEDTLS_CHACHA20_C + +/** + * \def MBEDTLS_CHACHAPOLY_C + * + * Enable the ChaCha20-Poly1305 AEAD algorithm. + * + * Module: library/chachapoly.c + * + * This module requires: MBEDTLS_CHACHA20_C, MBEDTLS_POLY1305_C + */ +#define MBEDTLS_CHACHAPOLY_C + +/** + * \def MBEDTLS_CIPHER_C + * + * Enable the generic cipher layer. + * + * Module: library/cipher.c + * Caller: library/ssl_tls.c + * + * Uncomment to enable generic cipher wrappers. + */ +#define MBEDTLS_CIPHER_C + +/** + * \def MBEDTLS_CMAC_C + * + * Enable the CMAC (Cipher-based Message Authentication Code) mode for block + * ciphers. + * + * Module: library/cmac.c + * + * Requires: MBEDTLS_AES_C or MBEDTLS_DES_C + * + */ +//#define MBEDTLS_CMAC_C + +/** + * \def MBEDTLS_CTR_DRBG_C + * + * Enable the CTR_DRBG AES-based random generator. + * The CTR_DRBG generator uses AES-256 by default. + * To use AES-128 instead, enable MBEDTLS_CTR_DRBG_USE_128_BIT_KEY below. + * + * Module: library/ctr_drbg.c + * Caller: + * + * Requires: MBEDTLS_AES_C + * + * This module provides the CTR_DRBG AES random number generator. + */ +#define MBEDTLS_CTR_DRBG_C + +/** + * \def MBEDTLS_DEBUG_C + * + * Enable the debug functions. + * + * Module: library/debug.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * This module provides debugging functions. + */ +#define MBEDTLS_DEBUG_C + +/** + * \def MBEDTLS_DES_C + * + * Enable the DES block cipher. + * + * Module: library/des.c + * Caller: library/pem.c + * library/cipher.c + * + * This module enables the following ciphersuites (if other requisites are + * enabled as well): + * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA + * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA + * + * PEM_PARSE uses DES/3DES for decrypting encrypted keys. + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers instead. + */ +#define MBEDTLS_DES_C + +/** + * \def MBEDTLS_DHM_C + * + * Enable the Diffie-Hellman-Merkle module. + * + * Module: library/dhm.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * This module is used by the following key exchanges: + * DHE-RSA, DHE-PSK + * + * \warning Using DHE constitutes a security risk as it + * is not possible to validate custom DH parameters. + * If possible, it is recommended users should consider + * preferring other methods of key exchange. + * See dhm.h for more details. + * + */ +#define MBEDTLS_DHM_C + +/** + * \def MBEDTLS_ECDH_C + * + * Enable the elliptic curve Diffie-Hellman library. + * + * Module: library/ecdh.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * This module is used by the following key exchanges: + * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK + * + * Requires: MBEDTLS_ECP_C + */ +#define MBEDTLS_ECDH_C + +/** + * \def MBEDTLS_ECDSA_C + * + * Enable the elliptic curve DSA library. + * + * Module: library/ecdsa.c + * Caller: + * + * This module is used by the following key exchanges: + * ECDHE-ECDSA + * + * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C + */ +#define MBEDTLS_ECDSA_C + +/** + * \def MBEDTLS_ECJPAKE_C + * + * Enable the elliptic curve J-PAKE library. + * + * \warning This is currently experimental. EC J-PAKE support is based on the + * Thread v1.0.0 specification; incompatible changes to the specification + * might still happen. For this reason, this is disabled by default. + * + * Module: library/ecjpake.c + * Caller: + * + * This module is used by the following key exchanges: + * ECJPAKE + * + * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C + */ +//#define MBEDTLS_ECJPAKE_C + +/** + * \def MBEDTLS_ECP_C + * + * Enable the elliptic curve over GF(p) library. + * + * Module: library/ecp.c + * Caller: library/ecdh.c + * library/ecdsa.c + * library/ecjpake.c + * + * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED + */ +#define MBEDTLS_ECP_C + +/** + * \def MBEDTLS_ENTROPY_C + * + * Enable the platform-specific entropy code. + * + * Module: library/entropy.c + * Caller: + * + * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C + * + * This module provides a generic entropy pool + */ +#define MBEDTLS_ENTROPY_C + +/** + * \def MBEDTLS_ERROR_C + * + * Enable error code to error string conversion. + * + * Module: library/error.c + * Caller: + * + * This module enables mbedtls_strerror(). + */ +#define MBEDTLS_ERROR_C + +/** + * \def MBEDTLS_GCM_C + * + * Enable the Galois/Counter Mode (GCM) for AES. + * + * Module: library/gcm.c + * + * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C + * + * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other + * requisites are enabled as well. + */ +#define MBEDTLS_GCM_C + +/** + * \def MBEDTLS_HAVEGE_C + * + * Enable the HAVEGE random generator. + * + * Warning: the HAVEGE random generator is not suitable for virtualized + * environments + * + * Warning: the HAVEGE random generator is dependent on timing and specific + * processor traits. It is therefore not advised to use HAVEGE as + * your applications primary random generator or primary entropy pool + * input. As a secondary input to your entropy pool, it IS able add + * the (limited) extra entropy it provides. + * + * Module: library/havege.c + * Caller: + * + * Requires: MBEDTLS_TIMING_C + * + * Uncomment to enable the HAVEGE random generator. + */ +//#define MBEDTLS_HAVEGE_C + +/** + * \def MBEDTLS_HKDF_C + * + * Enable the HKDF algorithm (RFC 5869). + * + * Module: library/hkdf.c + * Caller: + * + * Requires: MBEDTLS_MD_C + * + * This module adds support for the Hashed Message Authentication Code + * (HMAC)-based key derivation function (HKDF). + */ +#define MBEDTLS_HKDF_C + +/** + * \def MBEDTLS_HMAC_DRBG_C + * + * Enable the HMAC_DRBG random generator. + * + * Module: library/hmac_drbg.c + * Caller: + * + * Requires: MBEDTLS_MD_C + * + * Uncomment to enable the HMAC_DRBG random number geerator. + */ +#define MBEDTLS_HMAC_DRBG_C + +/** + * \def MBEDTLS_NIST_KW_C + * + * Enable the Key Wrapping mode for 128-bit block ciphers, + * as defined in NIST SP 800-38F. Only KW and KWP modes + * are supported. At the moment, only AES is approved by NIST. + * + * Module: library/nist_kw.c + * + * Requires: MBEDTLS_AES_C and MBEDTLS_CIPHER_C + */ +//#define MBEDTLS_NIST_KW_C + +/** + * \def MBEDTLS_MD_C + * + * Enable the generic message digest layer. + * + * Module: library/md.c + * Caller: + * + * Uncomment to enable generic message digest wrappers. + */ +#define MBEDTLS_MD_C + +/** + * \def MBEDTLS_MD2_C + * + * Enable the MD2 hash algorithm. + * + * Module: library/md2.c + * Caller: + * + * Uncomment to enable support for (rare) MD2-signed X.509 certs. + * + * \warning MD2 is considered a weak message digest and its use constitutes a + * security risk. If possible, we recommend avoiding dependencies on + * it, and considering stronger message digests instead. + * + */ +//#define MBEDTLS_MD2_C + +/** + * \def MBEDTLS_MD4_C + * + * Enable the MD4 hash algorithm. + * + * Module: library/md4.c + * Caller: + * + * Uncomment to enable support for (rare) MD4-signed X.509 certs. + * + * \warning MD4 is considered a weak message digest and its use constitutes a + * security risk. If possible, we recommend avoiding dependencies on + * it, and considering stronger message digests instead. + * + */ +//#define MBEDTLS_MD4_C + +/** + * \def MBEDTLS_MD5_C + * + * Enable the MD5 hash algorithm. + * + * Module: library/md5.c + * Caller: library/md.c + * library/pem.c + * library/ssl_tls.c + * + * This module is required for SSL/TLS up to version 1.1, and for TLS 1.2 + * depending on the handshake parameters. Further, it is used for checking + * MD5-signed certificates, and for PBKDF1 when decrypting PEM-encoded + * encrypted keys. + * + * \warning MD5 is considered a weak message digest and its use constitutes a + * security risk. If possible, we recommend avoiding dependencies on + * it, and considering stronger message digests instead. + * + */ +#define MBEDTLS_MD5_C + +/** + * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C + * + * Enable the buffer allocator implementation that makes use of a (stack) + * based buffer to 'allocate' dynamic memory. (replaces calloc() and free() + * calls) + * + * Module: library/memory_buffer_alloc.c + * + * Requires: MBEDTLS_PLATFORM_C + * MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS) + * + * Enable this module to enable the buffer memory allocator. + */ +//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C + +/** + * \def MBEDTLS_NET_C + * + * Enable the TCP and UDP over IPv6/IPv4 networking routines. + * + * \note This module only works on POSIX/Unix (including Linux, BSD and OS X) + * and Windows. For other platforms, you'll want to disable it, and write your + * own networking callbacks to be passed to \c mbedtls_ssl_set_bio(). + * + * \note See also our Knowledge Base article about porting to a new + * environment: + * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS + * + * Module: library/net_sockets.c + * + * This module provides networking routines. + */ +#define MBEDTLS_NET_C + +/** + * \def MBEDTLS_OID_C + * + * Enable the OID database. + * + * Module: library/oid.c + * Caller: library/asn1write.c + * library/pkcs5.c + * library/pkparse.c + * library/pkwrite.c + * library/rsa.c + * library/x509.c + * library/x509_create.c + * library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * library/x509write_crt.c + * library/x509write_csr.c + * + * This modules translates between OIDs and internal values. + */ +#define MBEDTLS_OID_C + +/** + * \def MBEDTLS_PADLOCK_C + * + * Enable VIA Padlock support on x86. + * + * Module: library/padlock.c + * Caller: library/aes.c + * + * Requires: MBEDTLS_HAVE_ASM + * + * This modules adds support for the VIA PadLock on x86. + */ +#define MBEDTLS_PADLOCK_C + +/** + * \def MBEDTLS_PEM_PARSE_C + * + * Enable PEM decoding / parsing. + * + * Module: library/pem.c + * Caller: library/dhm.c + * library/pkparse.c + * library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * + * Requires: MBEDTLS_BASE64_C + * + * This modules adds support for decoding / parsing PEM files. + */ +#define MBEDTLS_PEM_PARSE_C + +/** + * \def MBEDTLS_PEM_WRITE_C + * + * Enable PEM encoding / writing. + * + * Module: library/pem.c + * Caller: library/pkwrite.c + * library/x509write_crt.c + * library/x509write_csr.c + * + * Requires: MBEDTLS_BASE64_C + * + * This modules adds support for encoding / writing PEM files. + */ +#define MBEDTLS_PEM_WRITE_C + +/** + * \def MBEDTLS_PK_C + * + * Enable the generic public (asymetric) key layer. + * + * Module: library/pk.c + * Caller: library/ssl_tls.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C + * + * Uncomment to enable generic public key wrappers. + */ +#define MBEDTLS_PK_C + +/** + * \def MBEDTLS_PK_PARSE_C + * + * Enable the generic public (asymetric) key parser. + * + * Module: library/pkparse.c + * Caller: library/x509_crt.c + * library/x509_csr.c + * + * Requires: MBEDTLS_PK_C + * + * Uncomment to enable generic public key parse functions. + */ +#define MBEDTLS_PK_PARSE_C + +/** + * \def MBEDTLS_PK_WRITE_C + * + * Enable the generic public (asymetric) key writer. + * + * Module: library/pkwrite.c + * Caller: library/x509write.c + * + * Requires: MBEDTLS_PK_C + * + * Uncomment to enable generic public key write functions. + */ +#define MBEDTLS_PK_WRITE_C + +/** + * \def MBEDTLS_PKCS5_C + * + * Enable PKCS#5 functions. + * + * Module: library/pkcs5.c + * + * Requires: MBEDTLS_MD_C + * + * This module adds support for the PKCS#5 functions. + */ +#define MBEDTLS_PKCS5_C + +/** + * \def MBEDTLS_PKCS11_C + * + * Enable wrapper for PKCS#11 smartcard support. + * + * Module: library/pkcs11.c + * Caller: library/pk.c + * + * Requires: MBEDTLS_PK_C + * + * This module enables SSL/TLS PKCS #11 smartcard support. + * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) + */ +//#define MBEDTLS_PKCS11_C + +/** + * \def MBEDTLS_PKCS12_C + * + * Enable PKCS#12 PBE functions. + * Adds algorithms for parsing PKCS#8 encrypted private keys + * + * Module: library/pkcs12.c + * Caller: library/pkparse.c + * + * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C + * Can use: MBEDTLS_ARC4_C + * + * This module enables PKCS#12 functions. + */ +#define MBEDTLS_PKCS12_C + +/** + * \def MBEDTLS_PLATFORM_C + * + * Enable the platform abstraction layer that allows you to re-assign + * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit(). + * + * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT + * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned + * above to be specified at runtime or compile time respectively. + * + * \note This abstraction layer must be enabled on Windows (including MSYS2) + * as other module rely on it for a fixed snprintf implementation. + * + * Module: library/platform.c + * Caller: Most other .c files + * + * This module enables abstraction of common (libc) functions. + */ +#define MBEDTLS_PLATFORM_C + +/** + * \def MBEDTLS_POLY1305_C + * + * Enable the Poly1305 MAC algorithm. + * + * Module: library/poly1305.c + * Caller: library/chachapoly.c + */ +#define MBEDTLS_POLY1305_C + +/** + * \def MBEDTLS_RIPEMD160_C + * + * Enable the RIPEMD-160 hash algorithm. + * + * Module: library/ripemd160.c + * Caller: library/md.c + * + */ +#define MBEDTLS_RIPEMD160_C + +/** + * \def MBEDTLS_RSA_C + * + * Enable the RSA public-key cryptosystem. + * + * Module: library/rsa.c + * library/rsa_internal.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * library/x509.c + * + * This module is used by the following key exchanges: + * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK + * + * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C + */ +#define MBEDTLS_RSA_C + +/** + * \def MBEDTLS_SHA1_C + * + * Enable the SHA1 cryptographic hash algorithm. + * + * Module: library/sha1.c + * Caller: library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * library/x509write_crt.c + * + * This module is required for SSL/TLS up to version 1.1, for TLS 1.2 + * depending on the handshake parameters, and for SHA1-signed certificates. + * + * \warning SHA-1 is considered a weak message digest and its use constitutes + * a security risk. If possible, we recommend avoiding dependencies + * on it, and considering stronger message digests instead. + * + */ +#define MBEDTLS_SHA1_C + +/** + * \def MBEDTLS_SHA256_C + * + * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. + * + * Module: library/sha256.c + * Caller: library/entropy.c + * library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * This module adds support for SHA-224 and SHA-256. + * This module is required for the SSL/TLS 1.2 PRF function. + */ +#define MBEDTLS_SHA256_C + +/** + * \def MBEDTLS_SHA512_C + * + * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. + * + * Module: library/sha512.c + * Caller: library/entropy.c + * library/md.c + * library/ssl_cli.c + * library/ssl_srv.c + * + * This module adds support for SHA-384 and SHA-512. + */ +#define MBEDTLS_SHA512_C + +/** + * \def MBEDTLS_SSL_CACHE_C + * + * Enable simple SSL cache implementation. + * + * Module: library/ssl_cache.c + * Caller: + * + * Requires: MBEDTLS_SSL_CACHE_C + */ +#define MBEDTLS_SSL_CACHE_C + +/** + * \def MBEDTLS_SSL_COOKIE_C + * + * Enable basic implementation of DTLS cookies for hello verification. + * + * Module: library/ssl_cookie.c + * Caller: + */ +#define MBEDTLS_SSL_COOKIE_C + +/** + * \def MBEDTLS_SSL_TICKET_C + * + * Enable an implementation of TLS server-side callbacks for session tickets. + * + * Module: library/ssl_ticket.c + * Caller: + * + * Requires: MBEDTLS_CIPHER_C + */ +#define MBEDTLS_SSL_TICKET_C + +/** + * \def MBEDTLS_SSL_CLI_C + * + * Enable the SSL/TLS client code. + * + * Module: library/ssl_cli.c + * Caller: + * + * Requires: MBEDTLS_SSL_TLS_C + * + * This module is required for SSL/TLS client support. + */ +#define MBEDTLS_SSL_CLI_C + +/** + * \def MBEDTLS_SSL_SRV_C + * + * Enable the SSL/TLS server code. + * + * Module: library/ssl_srv.c + * Caller: + * + * Requires: MBEDTLS_SSL_TLS_C + * + * This module is required for SSL/TLS server support. + */ +#define MBEDTLS_SSL_SRV_C + +/** + * \def MBEDTLS_SSL_TLS_C + * + * Enable the generic SSL/TLS code. + * + * Module: library/ssl_tls.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * + * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C + * and at least one of the MBEDTLS_SSL_PROTO_XXX defines + * + * This module is required for SSL/TLS. + */ +#define MBEDTLS_SSL_TLS_C + +/** + * \def MBEDTLS_THREADING_C + * + * Enable the threading abstraction layer. + * By default mbed TLS assumes it is used in a non-threaded environment or that + * contexts are not shared between threads. If you do intend to use contexts + * between threads, you will need to enable this layer to prevent race + * conditions. See also our Knowledge Base article about threading: + * https://tls.mbed.org/kb/development/thread-safety-and-multi-threading + * + * Module: library/threading.c + * + * This allows different threading implementations (self-implemented or + * provided). + * + * You will have to enable either MBEDTLS_THREADING_ALT or + * MBEDTLS_THREADING_PTHREAD. + * + * Enable this layer to allow use of mutexes within mbed TLS + */ +//#define MBEDTLS_THREADING_C + +/** + * \def MBEDTLS_TIMING_C + * + * Enable the semi-portable timing interface. + * + * \note The provided implementation only works on POSIX/Unix (including Linux, + * BSD and OS X) and Windows. On other platforms, you can either disable that + * module and provide your own implementations of the callbacks needed by + * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide + * your own implementation of the whole module by setting + * \c MBEDTLS_TIMING_ALT in the current file. + * + * \note See also our Knowledge Base article about porting to a new + * environment: + * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS + * + * Module: library/timing.c + * Caller: library/havege.c + * + * This module is used by the HAVEGE random number generator. + */ +#define MBEDTLS_TIMING_C + +/** + * \def MBEDTLS_VERSION_C + * + * Enable run-time version information. + * + * Module: library/version.c + * + * This module provides run-time version information. + */ +#define MBEDTLS_VERSION_C + +/** + * \def MBEDTLS_X509_USE_C + * + * Enable X.509 core for using certificates. + * + * Module: library/x509.c + * Caller: library/x509_crl.c + * library/x509_crt.c + * library/x509_csr.c + * + * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, + * MBEDTLS_PK_PARSE_C + * + * This module is required for the X.509 parsing modules. + */ +#define MBEDTLS_X509_USE_C + +/** + * \def MBEDTLS_X509_CRT_PARSE_C + * + * Enable X.509 certificate parsing. + * + * Module: library/x509_crt.c + * Caller: library/ssl_cli.c + * library/ssl_srv.c + * library/ssl_tls.c + * + * Requires: MBEDTLS_X509_USE_C + * + * This module is required for X.509 certificate parsing. + */ +#define MBEDTLS_X509_CRT_PARSE_C + +/** + * \def MBEDTLS_X509_CRL_PARSE_C + * + * Enable X.509 CRL parsing. + * + * Module: library/x509_crl.c + * Caller: library/x509_crt.c + * + * Requires: MBEDTLS_X509_USE_C + * + * This module is required for X.509 CRL parsing. + */ +#define MBEDTLS_X509_CRL_PARSE_C + +/** + * \def MBEDTLS_X509_CSR_PARSE_C + * + * Enable X.509 Certificate Signing Request (CSR) parsing. + * + * Module: library/x509_csr.c + * Caller: library/x509_crt_write.c + * + * Requires: MBEDTLS_X509_USE_C + * + * This module is used for reading X.509 certificate request. + */ +#define MBEDTLS_X509_CSR_PARSE_C + +/** + * \def MBEDTLS_X509_CREATE_C + * + * Enable X.509 core for creating certificates. + * + * Module: library/x509_create.c + * + * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C + * + * This module is the basis for creating X.509 certificates and CSRs. + */ +#define MBEDTLS_X509_CREATE_C + +/** + * \def MBEDTLS_X509_CRT_WRITE_C + * + * Enable creating X.509 certificates. + * + * Module: library/x509_crt_write.c + * + * Requires: MBEDTLS_X509_CREATE_C + * + * This module is required for X.509 certificate creation. + */ +#define MBEDTLS_X509_CRT_WRITE_C + +/** + * \def MBEDTLS_X509_CSR_WRITE_C + * + * Enable creating X.509 Certificate Signing Requests (CSR). + * + * Module: library/x509_csr_write.c + * + * Requires: MBEDTLS_X509_CREATE_C + * + * This module is required for X.509 certificate request writing. + */ +#define MBEDTLS_X509_CSR_WRITE_C + +/** + * \def MBEDTLS_XTEA_C + * + * Enable the XTEA block cipher. + * + * Module: library/xtea.c + * Caller: + */ +#define MBEDTLS_XTEA_C + +/* \} name SECTION: mbed TLS modules */ + +/** + * \name SECTION: Module configuration options + * + * This section allows for the setting of module specific sizes and + * configuration options. The default values are already present in the + * relevant header files and should suffice for the regular use cases. + * + * Our advice is to enable options and change their values here + * only if you have a good reason and know the consequences. + * + * Please check the respective header file for documentation on these + * parameters (to prevent duplicate documentation). + * \{ + */ + +/* MPI / BIGNUM options */ +//#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ +//#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ + +/* CTR_DRBG options */ +//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */ +//#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ +//#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ +//#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ +//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ +//#define MBEDTLS_CTR_DRBG_USE_128_BIT_KEY /**< Use 128-bit key for CTR_DRBG - may reduce security (see ctr_drbg.h) */ + +/* HMAC_DRBG options */ +//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ +//#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ +//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ +//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ + +/* ECP options */ +//#define MBEDTLS_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ +//#define MBEDTLS_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ +//#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ + +/* Entropy options */ +//#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ +//#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ +//#define MBEDTLS_ENTROPY_MIN_HARDWARE 32 /**< Default minimum number of bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released */ + +/* Memory buffer allocator options */ +//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ + +/* Platform options */ +//#define MBEDTLS_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ +//#define MBEDTLS_PLATFORM_STD_CALLOC calloc /**< Default allocator to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_TIME time /**< Default time to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ +//#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */ +/* Note: your snprintf must correclty zero-terminate the buffer! */ +//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */ +//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" /**< Seed file to read/write with default implementation */ + +/* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */ +/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */ +//#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_TIME_MACRO time /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ +//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ +//#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */ +/* Note: your snprintf must correclty zero-terminate the buffer! */ +//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */ +//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */ +//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */ + +/** + * \brief This macro is invoked by the library when an invalid parameter + * is detected that is only checked with MBEDTLS_CHECK_PARAMS + * (see the documentation of that option for context). + * + * When you leave this undefined here, a default definition is + * provided that invokes the function mbedtls_param_failed(), + * which is declared in platform_util.h for the benefit of the + * library, but that you need to define in your application. + * + * When you define this here, this replaces the default + * definition in platform_util.h (which no longer declares the + * function mbedtls_param_failed()) and it is your responsibility + * to make sure this macro expands to something suitable (in + * particular, that all the necessary declarations are visible + * from within the library - you can ensure that by providing + * them in this file next to the macro definition). + * + * Note that you may define this macro to expand to nothing, in + * which case you don't have to worry about declarations or + * definitions. However, you will then be notified about invalid + * parameters only in non-void functions, and void function will + * just silently return early on invalid parameters, which + * partially negates the benefits of enabling + * #MBEDTLS_CHECK_PARAMS in the first place, so is discouraged. + * + * \param cond The expression that should evaluate to true, but doesn't. + */ +//#define MBEDTLS_PARAM_FAILED( cond ) assert( cond ) + +/* SSL Cache options */ +//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ +//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ + +/* SSL options */ + +/** \def MBEDTLS_SSL_MAX_CONTENT_LEN + * + * Maximum length (in bytes) of incoming and outgoing plaintext fragments. + * + * This determines the size of both the incoming and outgoing TLS I/O buffers + * in such a way that both are capable of holding the specified amount of + * plaintext data, regardless of the protection mechanism used. + * + * To configure incoming and outgoing I/O buffers separately, use + * #MBEDTLS_SSL_IN_CONTENT_LEN and #MBEDTLS_SSL_OUT_CONTENT_LEN, + * which overwrite the value set by this option. + * + * \note When using a value less than the default of 16KB on the client, it is + * recommended to use the Maximum Fragment Length (MFL) extension to + * inform the server about this limitation. On the server, there + * is no supported, standardized way of informing the client about + * restriction on the maximum size of incoming messages, and unless + * the limitation has been communicated by other means, it is recommended + * to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN + * while keeping the default value of 16KB for the incoming buffer. + * + * Uncomment to set the maximum plaintext size of both + * incoming and outgoing I/O buffers. + */ +//#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 + +/** \def MBEDTLS_SSL_IN_CONTENT_LEN + * + * Maximum length (in bytes) of incoming plaintext fragments. + * + * This determines the size of the incoming TLS I/O buffer in such a way + * that it is capable of holding the specified amount of plaintext data, + * regardless of the protection mechanism used. + * + * If this option is undefined, it inherits its value from + * #MBEDTLS_SSL_MAX_CONTENT_LEN. + * + * \note When using a value less than the default of 16KB on the client, it is + * recommended to use the Maximum Fragment Length (MFL) extension to + * inform the server about this limitation. On the server, there + * is no supported, standardized way of informing the client about + * restriction on the maximum size of incoming messages, and unless + * the limitation has been communicated by other means, it is recommended + * to only change the outgoing buffer size #MBEDTLS_SSL_OUT_CONTENT_LEN + * while keeping the default value of 16KB for the incoming buffer. + * + * Uncomment to set the maximum plaintext size of the incoming I/O buffer + * independently of the outgoing I/O buffer. + */ +//#define MBEDTLS_SSL_IN_CONTENT_LEN 16384 + +/** \def MBEDTLS_SSL_OUT_CONTENT_LEN + * + * Maximum length (in bytes) of outgoing plaintext fragments. + * + * This determines the size of the outgoing TLS I/O buffer in such a way + * that it is capable of holding the specified amount of plaintext data, + * regardless of the protection mechanism used. + * + * If this option undefined, it inherits its value from + * #MBEDTLS_SSL_MAX_CONTENT_LEN. + * + * It is possible to save RAM by setting a smaller outward buffer, while keeping + * the default inward 16384 byte buffer to conform to the TLS specification. + * + * The minimum required outward buffer size is determined by the handshake + * protocol's usage. Handshaking will fail if the outward buffer is too small. + * The specific size requirement depends on the configured ciphers and any + * certificate data which is sent during the handshake. + * + * Uncomment to set the maximum plaintext size of the outgoing I/O buffer + * independently of the incoming I/O buffer. + */ +//#define MBEDTLS_SSL_OUT_CONTENT_LEN 16384 + +/** \def MBEDTLS_SSL_DTLS_MAX_BUFFERING + * + * Maximum number of heap-allocated bytes for the purpose of + * DTLS handshake message reassembly and future message buffering. + * + * This should be at least 9/8 * MBEDTLSSL_IN_CONTENT_LEN + * to account for a reassembled handshake message of maximum size, + * together with its reassembly bitmap. + * + * A value of 2 * MBEDTLS_SSL_IN_CONTENT_LEN (32768 by default) + * should be sufficient for all practical situations as it allows + * to reassembly a large handshake message (such as a certificate) + * while buffering multiple smaller handshake messages. + * + */ +//#define MBEDTLS_SSL_DTLS_MAX_BUFFERING 32768 + +//#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ +//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */ +//#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */ + +/** + * Complete list of ciphersuites to use, in order of preference. + * + * \warning No dependency checking is done on that field! This option can only + * be used to restrict the set of available ciphersuites. It is your + * responsibility to make sure the needed modules are active. + * + * Use this to save a few hundred bytes of ROM (default ordering of all + * available ciphersuites) and a few to a few hundred bytes of RAM. + * + * The value below is only an example, not the default. + */ +//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 + +/* X509 options */ +//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 /**< Maximum number of intermediate CAs in a verification chain. */ +//#define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 /**< Maximum length of a path/filename string in bytes including the null terminator character ('\0'). */ + +/** + * Allow SHA-1 in the default TLS configuration for certificate signing. + * Without this build-time option, SHA-1 support must be activated explicitly + * through mbedtls_ssl_conf_cert_profile. Turning on this option is not + * recommended because of it is possible to generate SHA-1 collisions, however + * this may be safe for legacy infrastructure where additional controls apply. + * + * \warning SHA-1 is considered a weak message digest and its use constitutes + * a security risk. If possible, we recommend avoiding dependencies + * on it, and considering stronger message digests instead. + * + */ +// #define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES + +/** + * Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake + * signature and ciphersuite selection. Without this build-time option, SHA-1 + * support must be activated explicitly through mbedtls_ssl_conf_sig_hashes. + * The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by + * default. At the time of writing, there is no practical attack on the use + * of SHA-1 in handshake signatures, hence this option is turned on by default + * to preserve compatibility with existing peers, but the general + * warning applies nonetheless: + * + * \warning SHA-1 is considered a weak message digest and its use constitutes + * a security risk. If possible, we recommend avoiding dependencies + * on it, and considering stronger message digests instead. + * + */ +#define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE + +/** + * Uncomment the macro to let mbed TLS use your alternate implementation of + * mbedtls_platform_zeroize(). This replaces the default implementation in + * platform_util.c. + * + * mbedtls_platform_zeroize() is a widely used function across the library to + * zero a block of memory. The implementation is expected to be secure in the + * sense that it has been written to prevent the compiler from removing calls + * to mbedtls_platform_zeroize() as part of redundant code elimination + * optimizations. However, it is difficult to guarantee that calls to + * mbedtls_platform_zeroize() will not be optimized by the compiler as older + * versions of the C language standards do not provide a secure implementation + * of memset(). Therefore, MBEDTLS_PLATFORM_ZEROIZE_ALT enables users to + * configure their own implementation of mbedtls_platform_zeroize(), for + * example by using directives specific to their compiler, features from newer + * C standards (e.g using memset_s() in C11) or calling a secure memset() from + * their system (e.g explicit_bzero() in BSD). + */ +//#define MBEDTLS_PLATFORM_ZEROIZE_ALT + +/** + * Uncomment the macro to let Mbed TLS use your alternate implementation of + * mbedtls_platform_gmtime_r(). This replaces the default implementation in + * platform_util.c. + * + * gmtime() is not a thread-safe function as defined in the C standard. The + * library will try to use safer implementations of this function, such as + * gmtime_r() when available. However, if Mbed TLS cannot identify the target + * system, the implementation of mbedtls_platform_gmtime_r() will default to + * using the standard gmtime(). In this case, calls from the library to + * gmtime() will be guarded by the global mutex mbedtls_threading_gmtime_mutex + * if MBEDTLS_THREADING_C is enabled. We recommend that calls from outside the + * library are also guarded with this mutex to avoid race conditions. However, + * if the macro MBEDTLS_PLATFORM_GMTIME_R_ALT is defined, Mbed TLS will + * unconditionally use the implementation for mbedtls_platform_gmtime_r() + * supplied at compile time. + */ +//#define MBEDTLS_PLATFORM_GMTIME_R_ALT + +/* \} name SECTION: Customisation configuration options */ + +/* Target and application specific configurations + * + * Allow user to override any previous default. + * + */ +#if defined(MBEDTLS_USER_CONFIG_FILE) +#include MBEDTLS_USER_CONFIG_FILE +#endif + +#include "check_config.h" + +#endif /* MBEDTLS_CONFIG_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ctr_drbg.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ctr_drbg.h new file mode 100644 index 000000000..cc3df7b11 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ctr_drbg.h @@ -0,0 +1,380 @@ +/** + * \file ctr_drbg.h + * + * \brief This file contains CTR_DRBG definitions and functions. + * + * CTR_DRBG is a standardized way of building a PRNG from a block-cipher + * in counter mode operation, as defined in <em>NIST SP 800-90A: + * Recommendation for Random Number Generation Using Deterministic Random + * Bit Generators</em>. + * + * The Mbed TLS implementation of CTR_DRBG uses AES-256 (default) or AES-128 + * as the underlying block cipher. + * + * \warning Using 128-bit keys for CTR_DRBG limits the security of generated + * keys and operations that use random values generated to 128-bit security. + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_CTR_DRBG_H +#define MBEDTLS_CTR_DRBG_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "aes.h" + +#if defined(MBEDTLS_THREADING_C) +#include "threading.h" +#endif + +#define MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED -0x0034 /**< The entropy source failed. */ +#define MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG -0x0036 /**< The requested random buffer length is too big. */ +#define MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG -0x0038 /**< The input (entropy + additional data) is too large. */ +#define MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR -0x003A /**< Read or write error in file. */ + +#define MBEDTLS_CTR_DRBG_BLOCKSIZE 16 /**< The block size used by the cipher. */ + +#if defined(MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) +#define MBEDTLS_CTR_DRBG_KEYSIZE 16 /**< The key size used by the cipher (compile-time choice: 128 bits). */ +#else +#define MBEDTLS_CTR_DRBG_KEYSIZE 32 /**< The key size used by the cipher (compile-time choice: 256 bits). */ +#endif + +#define MBEDTLS_CTR_DRBG_KEYBITS ( MBEDTLS_CTR_DRBG_KEYSIZE * 8 ) /**< The key size for the DRBG operation, in bits. */ +#define MBEDTLS_CTR_DRBG_SEEDLEN ( MBEDTLS_CTR_DRBG_KEYSIZE + MBEDTLS_CTR_DRBG_BLOCKSIZE ) /**< The seed length, calculated as (counter + AES key). */ + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them using the compiler command + * line. + * \{ + */ + +#if !defined(MBEDTLS_CTR_DRBG_ENTROPY_LEN) +#if defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256) +#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 +/**< The amount of entropy used per seed by default: + * <ul><li>48 with SHA-512.</li> + * <li>32 with SHA-256.</li></ul> + */ +#else +#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 32 +/**< Amount of entropy used per seed by default: + * <ul><li>48 with SHA-512.</li> + * <li>32 with SHA-256.</li></ul> + */ +#endif +#endif + +#if !defined(MBEDTLS_CTR_DRBG_RESEED_INTERVAL) +#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 +/**< The interval before reseed is performed by default. */ +#endif + +#if !defined(MBEDTLS_CTR_DRBG_MAX_INPUT) +#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 +/**< The maximum number of additional input Bytes. */ +#endif + +#if !defined(MBEDTLS_CTR_DRBG_MAX_REQUEST) +#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 +/**< The maximum number of requested Bytes per call. */ +#endif + +#if !defined(MBEDTLS_CTR_DRBG_MAX_SEED_INPUT) +#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 +/**< The maximum size of seed or reseed buffer. */ +#endif + +/* \} name SECTION: Module settings */ + +#define MBEDTLS_CTR_DRBG_PR_OFF 0 +/**< Prediction resistance is disabled. */ +#define MBEDTLS_CTR_DRBG_PR_ON 1 +/**< Prediction resistance is enabled. */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The CTR_DRBG context structure. + */ +typedef struct mbedtls_ctr_drbg_context +{ + unsigned char counter[16]; /*!< The counter (V). */ + int reseed_counter; /*!< The reseed counter. */ + int prediction_resistance; /*!< This determines whether prediction + resistance is enabled, that is + whether to systematically reseed before + each random generation. */ + size_t entropy_len; /*!< The amount of entropy grabbed on each + seed or reseed operation. */ + int reseed_interval; /*!< The reseed interval. */ + + mbedtls_aes_context aes_ctx; /*!< The AES context. */ + + /* + * Callbacks (Entropy) + */ + int (*f_entropy)(void *, unsigned char *, size_t); + /*!< The entropy callback function. */ + + void *p_entropy; /*!< The context for the entropy function. */ + +#if defined(MBEDTLS_THREADING_C) + mbedtls_threading_mutex_t mutex; +#endif +} +mbedtls_ctr_drbg_context; + +/** + * \brief This function initializes the CTR_DRBG context, + * and prepares it for mbedtls_ctr_drbg_seed() + * or mbedtls_ctr_drbg_free(). + * + * \param ctx The CTR_DRBG context to initialize. + */ +void mbedtls_ctr_drbg_init( mbedtls_ctr_drbg_context *ctx ); + +/** + * \brief This function seeds and sets up the CTR_DRBG + * entropy source for future reseeds. + * + * \note Personalization data can be provided in addition to the more generic + * entropy source, to make this instantiation as unique as possible. + * + * \param ctx The CTR_DRBG context to seed. + * \param f_entropy The entropy callback, taking as arguments the + * \p p_entropy context, the buffer to fill, and the + length of the buffer. + * \param p_entropy The entropy context. + * \param custom Personalization data, that is device-specific + identifiers. Can be NULL. + * \param len The length of the personalization data. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on failure. + */ +int mbedtls_ctr_drbg_seed( mbedtls_ctr_drbg_context *ctx, + int (*f_entropy)(void *, unsigned char *, size_t), + void *p_entropy, + const unsigned char *custom, + size_t len ); + +/** + * \brief This function clears CTR_CRBG context data. + * + * \param ctx The CTR_DRBG context to clear. + */ +void mbedtls_ctr_drbg_free( mbedtls_ctr_drbg_context *ctx ); + +/** + * \brief This function turns prediction resistance on or off. + * The default value is off. + * + * \note If enabled, entropy is gathered at the beginning of + * every call to mbedtls_ctr_drbg_random_with_add(). + * Only use this if your entropy source has sufficient + * throughput. + * + * \param ctx The CTR_DRBG context. + * \param resistance #MBEDTLS_CTR_DRBG_PR_ON or #MBEDTLS_CTR_DRBG_PR_OFF. + */ +void mbedtls_ctr_drbg_set_prediction_resistance( mbedtls_ctr_drbg_context *ctx, + int resistance ); + +/** + * \brief This function sets the amount of entropy grabbed on each + * seed or reseed. The default value is + * #MBEDTLS_CTR_DRBG_ENTROPY_LEN. + * + * \param ctx The CTR_DRBG context. + * \param len The amount of entropy to grab. + */ +void mbedtls_ctr_drbg_set_entropy_len( mbedtls_ctr_drbg_context *ctx, + size_t len ); + +/** + * \brief This function sets the reseed interval. + * The default value is #MBEDTLS_CTR_DRBG_RESEED_INTERVAL. + * + * \param ctx The CTR_DRBG context. + * \param interval The reseed interval. + */ +void mbedtls_ctr_drbg_set_reseed_interval( mbedtls_ctr_drbg_context *ctx, + int interval ); + +/** + * \brief This function reseeds the CTR_DRBG context, that is + * extracts data from the entropy source. + * + * \param ctx The CTR_DRBG context. + * \param additional Additional data to add to the state. Can be NULL. + * \param len The length of the additional data. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on failure. + */ +int mbedtls_ctr_drbg_reseed( mbedtls_ctr_drbg_context *ctx, + const unsigned char *additional, size_t len ); + +/** + * \brief This function updates the state of the CTR_DRBG context. + * + * \param ctx The CTR_DRBG context. + * \param additional The data to update the state with. + * \param add_len Length of \p additional in bytes. This must be at + * most #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG if + * \p add_len is more than + * #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT. + * \return An error from the underlying AES cipher on failure. + */ +int mbedtls_ctr_drbg_update_ret( mbedtls_ctr_drbg_context *ctx, + const unsigned char *additional, + size_t add_len ); + +/** + * \brief This function updates a CTR_DRBG instance with additional + * data and uses it to generate random data. + * + * \note The function automatically reseeds if the reseed counter is exceeded. + * + * \param p_rng The CTR_DRBG context. This must be a pointer to a + * #mbedtls_ctr_drbg_context structure. + * \param output The buffer to fill. + * \param output_len The length of the buffer. + * \param additional Additional data to update. Can be NULL. + * \param add_len The length of the additional data. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or + * #MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG on failure. + */ +int mbedtls_ctr_drbg_random_with_add( void *p_rng, + unsigned char *output, size_t output_len, + const unsigned char *additional, size_t add_len ); + +/** + * \brief This function uses CTR_DRBG to generate random data. + * + * \note The function automatically reseeds if the reseed counter is exceeded. + * + * \param p_rng The CTR_DRBG context. This must be a pointer to a + * #mbedtls_ctr_drbg_context structure. + * \param output The buffer to fill. + * \param output_len The length of the buffer. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or + * #MBEDTLS_ERR_CTR_DRBG_REQUEST_TOO_BIG on failure. + */ +int mbedtls_ctr_drbg_random( void *p_rng, + unsigned char *output, size_t output_len ); + + +#if ! defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief This function updates the state of the CTR_DRBG context. + * + * \deprecated Superseded by mbedtls_ctr_drbg_update_ret() + * in 2.16.0. + * + * \note If \p add_len is greater than + * #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT, only the first + * #MBEDTLS_CTR_DRBG_MAX_SEED_INPUT Bytes are used. + * The remaining Bytes are silently discarded. + * + * \param ctx The CTR_DRBG context. + * \param additional The data to update the state with. + * \param add_len Length of \p additional data. + */ +MBEDTLS_DEPRECATED void mbedtls_ctr_drbg_update( + mbedtls_ctr_drbg_context *ctx, + const unsigned char *additional, + size_t add_len ); +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_FS_IO) +/** + * \brief This function writes a seed file. + * + * \param ctx The CTR_DRBG context. + * \param path The name of the file. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error. + * \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED on + * failure. + */ +int mbedtls_ctr_drbg_write_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path ); + +/** + * \brief This function reads and updates a seed file. The seed + * is added to this instance. + * + * \param ctx The CTR_DRBG context. + * \param path The name of the file. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_CTR_DRBG_FILE_IO_ERROR on file error. + * \return #MBEDTLS_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED or + * #MBEDTLS_ERR_CTR_DRBG_INPUT_TOO_BIG on failure. + */ +int mbedtls_ctr_drbg_update_seed_file( mbedtls_ctr_drbg_context *ctx, const char *path ); +#endif /* MBEDTLS_FS_IO */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief The CTR_DRBG checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_ctr_drbg_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +/* Internal functions (do not call directly) */ +int mbedtls_ctr_drbg_seed_entropy_len( mbedtls_ctr_drbg_context *, + int (*)(void *, unsigned char *, size_t), void *, + const unsigned char *, size_t, size_t ); + +#ifdef __cplusplus +} +#endif + +#endif /* ctr_drbg.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/debug.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/debug.h new file mode 100644 index 000000000..736444bb7 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/debug.h @@ -0,0 +1,265 @@ +/** + * \file debug.h + * + * \brief Functions for controlling and providing debug output from the library. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_DEBUG_H +#define MBEDTLS_DEBUG_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "ssl.h" + +#if defined(MBEDTLS_ECP_C) +#include "ecp.h" +#endif + +#if defined(MBEDTLS_DEBUG_C) + +#define MBEDTLS_DEBUG_STRIP_PARENS( ... ) __VA_ARGS__ + +#define MBEDTLS_SSL_DEBUG_MSG( level, args ) \ + mbedtls_debug_print_msg( ssl, level, __FILE__, __LINE__, \ + MBEDTLS_DEBUG_STRIP_PARENS args ) + +#define MBEDTLS_SSL_DEBUG_RET( level, text, ret ) \ + mbedtls_debug_print_ret( ssl, level, __FILE__, __LINE__, text, ret ) + +#define MBEDTLS_SSL_DEBUG_BUF( level, text, buf, len ) \ + mbedtls_debug_print_buf( ssl, level, __FILE__, __LINE__, text, buf, len ) + +#if defined(MBEDTLS_BIGNUM_C) +#define MBEDTLS_SSL_DEBUG_MPI( level, text, X ) \ + mbedtls_debug_print_mpi( ssl, level, __FILE__, __LINE__, text, X ) +#endif + +#if defined(MBEDTLS_ECP_C) +#define MBEDTLS_SSL_DEBUG_ECP( level, text, X ) \ + mbedtls_debug_print_ecp( ssl, level, __FILE__, __LINE__, text, X ) +#endif + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +#define MBEDTLS_SSL_DEBUG_CRT( level, text, crt ) \ + mbedtls_debug_print_crt( ssl, level, __FILE__, __LINE__, text, crt ) +#endif + +#if defined(MBEDTLS_ECDH_C) +#define MBEDTLS_SSL_DEBUG_ECDH( level, ecdh, attr ) \ + mbedtls_debug_printf_ecdh( ssl, level, __FILE__, __LINE__, ecdh, attr ) +#endif + +#else /* MBEDTLS_DEBUG_C */ + +#define MBEDTLS_SSL_DEBUG_MSG( level, args ) do { } while( 0 ) +#define MBEDTLS_SSL_DEBUG_RET( level, text, ret ) do { } while( 0 ) +#define MBEDTLS_SSL_DEBUG_BUF( level, text, buf, len ) do { } while( 0 ) +#define MBEDTLS_SSL_DEBUG_MPI( level, text, X ) do { } while( 0 ) +#define MBEDTLS_SSL_DEBUG_ECP( level, text, X ) do { } while( 0 ) +#define MBEDTLS_SSL_DEBUG_CRT( level, text, crt ) do { } while( 0 ) +#define MBEDTLS_SSL_DEBUG_ECDH( level, ecdh, attr ) do { } while( 0 ) + +#endif /* MBEDTLS_DEBUG_C */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Set the threshold error level to handle globally all debug output. + * Debug messages that have a level over the threshold value are + * discarded. + * (Default value: 0 = No debug ) + * + * \param threshold theshold level of messages to filter on. Messages at a + * higher level will be discarded. + * - Debug levels + * - 0 No debug + * - 1 Error + * - 2 State change + * - 3 Informational + * - 4 Verbose + */ +void mbedtls_debug_set_threshold( int threshold ); + +/** + * \brief Print a message to the debug output. This function is always used + * through the MBEDTLS_SSL_DEBUG_MSG() macro, which supplies the ssl + * context, file and line number parameters. + * + * \param ssl SSL context + * \param level error level of the debug message + * \param file file the message has occurred in + * \param line line number the message has occurred at + * \param format format specifier, in printf format + * \param ... variables used by the format specifier + * + * \attention This function is intended for INTERNAL usage within the + * library only. + */ +void mbedtls_debug_print_msg( const mbedtls_ssl_context *ssl, int level, + const char *file, int line, + const char *format, ... ); + +/** + * \brief Print the return value of a function to the debug output. This + * function is always used through the MBEDTLS_SSL_DEBUG_RET() macro, + * which supplies the ssl context, file and line number parameters. + * + * \param ssl SSL context + * \param level error level of the debug message + * \param file file the error has occurred in + * \param line line number the error has occurred in + * \param text the name of the function that returned the error + * \param ret the return code value + * + * \attention This function is intended for INTERNAL usage within the + * library only. + */ +void mbedtls_debug_print_ret( const mbedtls_ssl_context *ssl, int level, + const char *file, int line, + const char *text, int ret ); + +/** + * \brief Output a buffer of size len bytes to the debug output. This function + * is always used through the MBEDTLS_SSL_DEBUG_BUF() macro, + * which supplies the ssl context, file and line number parameters. + * + * \param ssl SSL context + * \param level error level of the debug message + * \param file file the error has occurred in + * \param line line number the error has occurred in + * \param text a name or label for the buffer being dumped. Normally the + * variable or buffer name + * \param buf the buffer to be outputted + * \param len length of the buffer + * + * \attention This function is intended for INTERNAL usage within the + * library only. + */ +void mbedtls_debug_print_buf( const mbedtls_ssl_context *ssl, int level, + const char *file, int line, const char *text, + const unsigned char *buf, size_t len ); + +#if defined(MBEDTLS_BIGNUM_C) +/** + * \brief Print a MPI variable to the debug output. This function is always + * used through the MBEDTLS_SSL_DEBUG_MPI() macro, which supplies the + * ssl context, file and line number parameters. + * + * \param ssl SSL context + * \param level error level of the debug message + * \param file file the error has occurred in + * \param line line number the error has occurred in + * \param text a name or label for the MPI being output. Normally the + * variable name + * \param X the MPI variable + * + * \attention This function is intended for INTERNAL usage within the + * library only. + */ +void mbedtls_debug_print_mpi( const mbedtls_ssl_context *ssl, int level, + const char *file, int line, + const char *text, const mbedtls_mpi *X ); +#endif + +#if defined(MBEDTLS_ECP_C) +/** + * \brief Print an ECP point to the debug output. This function is always + * used through the MBEDTLS_SSL_DEBUG_ECP() macro, which supplies the + * ssl context, file and line number parameters. + * + * \param ssl SSL context + * \param level error level of the debug message + * \param file file the error has occurred in + * \param line line number the error has occurred in + * \param text a name or label for the ECP point being output. Normally the + * variable name + * \param X the ECP point + * + * \attention This function is intended for INTERNAL usage within the + * library only. + */ +void mbedtls_debug_print_ecp( const mbedtls_ssl_context *ssl, int level, + const char *file, int line, + const char *text, const mbedtls_ecp_point *X ); +#endif + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Print a X.509 certificate structure to the debug output. This + * function is always used through the MBEDTLS_SSL_DEBUG_CRT() macro, + * which supplies the ssl context, file and line number parameters. + * + * \param ssl SSL context + * \param level error level of the debug message + * \param file file the error has occurred in + * \param line line number the error has occurred in + * \param text a name or label for the certificate being output + * \param crt X.509 certificate structure + * + * \attention This function is intended for INTERNAL usage within the + * library only. + */ +void mbedtls_debug_print_crt( const mbedtls_ssl_context *ssl, int level, + const char *file, int line, + const char *text, const mbedtls_x509_crt *crt ); +#endif + +#if defined(MBEDTLS_ECDH_C) +typedef enum +{ + MBEDTLS_DEBUG_ECDH_Q, + MBEDTLS_DEBUG_ECDH_QP, + MBEDTLS_DEBUG_ECDH_Z, +} mbedtls_debug_ecdh_attr; + +/** + * \brief Print a field of the ECDH structure in the SSL context to the debug + * output. This function is always used through the + * MBEDTLS_SSL_DEBUG_ECDH() macro, which supplies the ssl context, file + * and line number parameters. + * + * \param ssl SSL context + * \param level error level of the debug message + * \param file file the error has occurred in + * \param line line number the error has occurred in + * \param ecdh the ECDH context + * \param attr the identifier of the attribute being output + * + * \attention This function is intended for INTERNAL usage within the + * library only. + */ +void mbedtls_debug_printf_ecdh( const mbedtls_ssl_context *ssl, int level, + const char *file, int line, + const mbedtls_ecdh_context *ecdh, + mbedtls_debug_ecdh_attr attr ); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* debug.h */ + diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/des.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/des.h new file mode 100644 index 000000000..54e6b7894 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/des.h @@ -0,0 +1,356 @@ +/** + * \file des.h + * + * \brief DES block cipher + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + * + */ +#ifndef MBEDTLS_DES_H +#define MBEDTLS_DES_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +#define MBEDTLS_DES_ENCRYPT 1 +#define MBEDTLS_DES_DECRYPT 0 + +#define MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH -0x0032 /**< The data input has an invalid length. */ + +/* MBEDTLS_ERR_DES_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_DES_HW_ACCEL_FAILED -0x0033 /**< DES hardware accelerator failed. */ + +#define MBEDTLS_DES_KEY_SIZE 8 + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_DES_ALT) +// Regular implementation +// + +/** + * \brief DES context structure + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +typedef struct mbedtls_des_context +{ + uint32_t sk[32]; /*!< DES subkeys */ +} +mbedtls_des_context; + +/** + * \brief Triple-DES context structure + */ +typedef struct mbedtls_des3_context +{ + uint32_t sk[96]; /*!< 3DES subkeys */ +} +mbedtls_des3_context; + +#else /* MBEDTLS_DES_ALT */ +#include "des_alt.h" +#endif /* MBEDTLS_DES_ALT */ + +/** + * \brief Initialize DES context + * + * \param ctx DES context to be initialized + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +void mbedtls_des_init( mbedtls_des_context *ctx ); + +/** + * \brief Clear DES context + * + * \param ctx DES context to be cleared + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +void mbedtls_des_free( mbedtls_des_context *ctx ); + +/** + * \brief Initialize Triple-DES context + * + * \param ctx DES3 context to be initialized + */ +void mbedtls_des3_init( mbedtls_des3_context *ctx ); + +/** + * \brief Clear Triple-DES context + * + * \param ctx DES3 context to be cleared + */ +void mbedtls_des3_free( mbedtls_des3_context *ctx ); + +/** + * \brief Set key parity on the given key to odd. + * + * DES keys are 56 bits long, but each byte is padded with + * a parity bit to allow verification. + * + * \param key 8-byte secret key + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +void mbedtls_des_key_set_parity( unsigned char key[MBEDTLS_DES_KEY_SIZE] ); + +/** + * \brief Check that key parity on the given key is odd. + * + * DES keys are 56 bits long, but each byte is padded with + * a parity bit to allow verification. + * + * \param key 8-byte secret key + * + * \return 0 is parity was ok, 1 if parity was not correct. + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +int mbedtls_des_key_check_key_parity( const unsigned char key[MBEDTLS_DES_KEY_SIZE] ); + +/** + * \brief Check that key is not a weak or semi-weak DES key + * + * \param key 8-byte secret key + * + * \return 0 if no weak key was found, 1 if a weak key was identified. + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +int mbedtls_des_key_check_weak( const unsigned char key[MBEDTLS_DES_KEY_SIZE] ); + +/** + * \brief DES key schedule (56-bit, encryption) + * + * \param ctx DES context to be initialized + * \param key 8-byte secret key + * + * \return 0 + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +int mbedtls_des_setkey_enc( mbedtls_des_context *ctx, const unsigned char key[MBEDTLS_DES_KEY_SIZE] ); + +/** + * \brief DES key schedule (56-bit, decryption) + * + * \param ctx DES context to be initialized + * \param key 8-byte secret key + * + * \return 0 + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +int mbedtls_des_setkey_dec( mbedtls_des_context *ctx, const unsigned char key[MBEDTLS_DES_KEY_SIZE] ); + +/** + * \brief Triple-DES key schedule (112-bit, encryption) + * + * \param ctx 3DES context to be initialized + * \param key 16-byte secret key + * + * \return 0 + */ +int mbedtls_des3_set2key_enc( mbedtls_des3_context *ctx, + const unsigned char key[MBEDTLS_DES_KEY_SIZE * 2] ); + +/** + * \brief Triple-DES key schedule (112-bit, decryption) + * + * \param ctx 3DES context to be initialized + * \param key 16-byte secret key + * + * \return 0 + */ +int mbedtls_des3_set2key_dec( mbedtls_des3_context *ctx, + const unsigned char key[MBEDTLS_DES_KEY_SIZE * 2] ); + +/** + * \brief Triple-DES key schedule (168-bit, encryption) + * + * \param ctx 3DES context to be initialized + * \param key 24-byte secret key + * + * \return 0 + */ +int mbedtls_des3_set3key_enc( mbedtls_des3_context *ctx, + const unsigned char key[MBEDTLS_DES_KEY_SIZE * 3] ); + +/** + * \brief Triple-DES key schedule (168-bit, decryption) + * + * \param ctx 3DES context to be initialized + * \param key 24-byte secret key + * + * \return 0 + */ +int mbedtls_des3_set3key_dec( mbedtls_des3_context *ctx, + const unsigned char key[MBEDTLS_DES_KEY_SIZE * 3] ); + +/** + * \brief DES-ECB block encryption/decryption + * + * \param ctx DES context + * \param input 64-bit input block + * \param output 64-bit output block + * + * \return 0 if successful + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +int mbedtls_des_crypt_ecb( mbedtls_des_context *ctx, + const unsigned char input[8], + unsigned char output[8] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief DES-CBC buffer encryption/decryption + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx DES context + * \param mode MBEDTLS_DES_ENCRYPT or MBEDTLS_DES_DECRYPT + * \param length length of the input data + * \param iv initialization vector (updated after use) + * \param input buffer holding the input data + * \param output buffer holding the output data + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +int mbedtls_des_crypt_cbc( mbedtls_des_context *ctx, + int mode, + size_t length, + unsigned char iv[8], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +/** + * \brief 3DES-ECB block encryption/decryption + * + * \param ctx 3DES context + * \param input 64-bit input block + * \param output 64-bit output block + * + * \return 0 if successful + */ +int mbedtls_des3_crypt_ecb( mbedtls_des3_context *ctx, + const unsigned char input[8], + unsigned char output[8] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief 3DES-CBC buffer encryption/decryption + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx 3DES context + * \param mode MBEDTLS_DES_ENCRYPT or MBEDTLS_DES_DECRYPT + * \param length length of the input data + * \param iv initialization vector (updated after use) + * \param input buffer holding the input data + * \param output buffer holding the output data + * + * \return 0 if successful, or MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH + */ +int mbedtls_des3_crypt_cbc( mbedtls_des3_context *ctx, + int mode, + size_t length, + unsigned char iv[8], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +/** + * \brief Internal function for key expansion. + * (Only exposed to allow overriding it, + * see MBEDTLS_DES_SETKEY_ALT) + * + * \param SK Round keys + * \param key Base key + * + * \warning DES is considered a weak cipher and its use constitutes a + * security risk. We recommend considering stronger ciphers + * instead. + */ +void mbedtls_des_setkey( uint32_t SK[32], + const unsigned char key[MBEDTLS_DES_KEY_SIZE] ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_des_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* des.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/dhm.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/dhm.h new file mode 100644 index 000000000..2909f5fbc --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/dhm.h @@ -0,0 +1,1096 @@ +/** + * \file dhm.h + * + * \brief This file contains Diffie-Hellman-Merkle (DHM) key exchange + * definitions and functions. + * + * Diffie-Hellman-Merkle (DHM) key exchange is defined in + * <em>RFC-2631: Diffie-Hellman Key Agreement Method</em> and + * <em>Public-Key Cryptography Standards (PKCS) #3: Diffie + * Hellman Key Agreement Standard</em>. + * + * <em>RFC-3526: More Modular Exponential (MODP) Diffie-Hellman groups for + * Internet Key Exchange (IKE)</em> defines a number of standardized + * Diffie-Hellman groups for IKE. + * + * <em>RFC-5114: Additional Diffie-Hellman Groups for Use with IETF + * Standards</em> defines a number of standardized Diffie-Hellman + * groups that can be used. + * + * \warning The security of the DHM key exchange relies on the proper choice + * of prime modulus - optimally, it should be a safe prime. The usage + * of non-safe primes both decreases the difficulty of the underlying + * discrete logarithm problem and can lead to small subgroup attacks + * leaking private exponent bits when invalid public keys are used + * and not detected. This is especially relevant if the same DHM + * parameters are reused for multiple key exchanges as in static DHM, + * while the criticality of small-subgroup attacks is lower for + * ephemeral DHM. + * + * \warning For performance reasons, the code does neither perform primality + * nor safe primality tests, nor the expensive checks for invalid + * subgroups. Moreover, even if these were performed, non-standardized + * primes cannot be trusted because of the possibility of backdoors + * that can't be effectively checked for. + * + * \warning Diffie-Hellman-Merkle is therefore a security risk when not using + * standardized primes generated using a trustworthy ("nothing up + * my sleeve") method, such as the RFC 3526 / 7919 primes. In the TLS + * protocol, DH parameters need to be negotiated, so using the default + * primes systematically is not always an option. If possible, use + * Elliptic Curve Diffie-Hellman (ECDH), which has better performance, + * and for which the TLS protocol mandates the use of standard + * parameters. + * + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_DHM_H +#define MBEDTLS_DHM_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif +#include "bignum.h" + +/* + * DHM Error codes + */ +#define MBEDTLS_ERR_DHM_BAD_INPUT_DATA -0x3080 /**< Bad input parameters. */ +#define MBEDTLS_ERR_DHM_READ_PARAMS_FAILED -0x3100 /**< Reading of the DHM parameters failed. */ +#define MBEDTLS_ERR_DHM_MAKE_PARAMS_FAILED -0x3180 /**< Making of the DHM parameters failed. */ +#define MBEDTLS_ERR_DHM_READ_PUBLIC_FAILED -0x3200 /**< Reading of the public values failed. */ +#define MBEDTLS_ERR_DHM_MAKE_PUBLIC_FAILED -0x3280 /**< Making of the public value failed. */ +#define MBEDTLS_ERR_DHM_CALC_SECRET_FAILED -0x3300 /**< Calculation of the DHM secret failed. */ +#define MBEDTLS_ERR_DHM_INVALID_FORMAT -0x3380 /**< The ASN.1 data is not formatted correctly. */ +#define MBEDTLS_ERR_DHM_ALLOC_FAILED -0x3400 /**< Allocation of memory failed. */ +#define MBEDTLS_ERR_DHM_FILE_IO_ERROR -0x3480 /**< Read or write of file failed. */ + +/* MBEDTLS_ERR_DHM_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_DHM_HW_ACCEL_FAILED -0x3500 /**< DHM hardware accelerator failed. */ + +#define MBEDTLS_ERR_DHM_SET_GROUP_FAILED -0x3580 /**< Setting the modulus and generator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_DHM_ALT) + +/** + * \brief The DHM context structure. + */ +typedef struct mbedtls_dhm_context +{ + size_t len; /*!< The size of \p P in Bytes. */ + mbedtls_mpi P; /*!< The prime modulus. */ + mbedtls_mpi G; /*!< The generator. */ + mbedtls_mpi X; /*!< Our secret value. */ + mbedtls_mpi GX; /*!< Our public key = \c G^X mod \c P. */ + mbedtls_mpi GY; /*!< The public key of the peer = \c G^Y mod \c P. */ + mbedtls_mpi K; /*!< The shared secret = \c G^(XY) mod \c P. */ + mbedtls_mpi RP; /*!< The cached value = \c R^2 mod \c P. */ + mbedtls_mpi Vi; /*!< The blinding value. */ + mbedtls_mpi Vf; /*!< The unblinding value. */ + mbedtls_mpi pX; /*!< The previous \c X. */ +} +mbedtls_dhm_context; + +#else /* MBEDTLS_DHM_ALT */ +#include "dhm_alt.h" +#endif /* MBEDTLS_DHM_ALT */ + +/** + * \brief This function initializes the DHM context. + * + * \param ctx The DHM context to initialize. + */ +void mbedtls_dhm_init( mbedtls_dhm_context *ctx ); + +/** + * \brief This function parses the DHM parameters in a + * TLS ServerKeyExchange handshake message + * (DHM modulus, generator, and public key). + * + * \note In a TLS handshake, this is the how the client + * sets up its DHM context from the server's public + * DHM key material. + * + * \param ctx The DHM context to use. This must be initialized. + * \param p On input, *p must be the start of the input buffer. + * On output, *p is updated to point to the end of the data + * that has been read. On success, this is the first byte + * past the end of the ServerKeyExchange parameters. + * On error, this is the point at which an error has been + * detected, which is usually not useful except to debug + * failures. + * \param end The end of the input buffer. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_DHM_XXX error code on failure. + */ +int mbedtls_dhm_read_params( mbedtls_dhm_context *ctx, + unsigned char **p, + const unsigned char *end ); + +/** + * \brief This function generates a DHM key pair and exports its + * public part together with the DHM parameters in the format + * used in a TLS ServerKeyExchange handshake message. + * + * \note This function assumes that the DHM parameters \c ctx->P + * and \c ctx->G have already been properly set. For that, use + * mbedtls_dhm_set_group() below in conjunction with + * mbedtls_mpi_read_binary() and mbedtls_mpi_read_string(). + * + * \note In a TLS handshake, this is the how the server generates + * and exports its DHM key material. + * + * \param ctx The DHM context to use. This must be initialized + * and have the DHM parameters set. It may or may not + * already have imported the peer's public key. + * \param x_size The private key size in Bytes. + * \param olen The address at which to store the number of Bytes + * written on success. This must not be \c NULL. + * \param output The destination buffer. This must be a writable buffer of + * sufficient size to hold the reduced binary presentation of + * the modulus, the generator and the public key, each wrapped + * with a 2-byte length field. It is the responsibility of the + * caller to ensure that enough space is available. Refer to + * mbedtls_mpi_size() to computing the byte-size of an MPI. + * \param f_rng The RNG function. Must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng doesn't need a context parameter. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_DHM_XXX error code on failure. + */ +int mbedtls_dhm_make_params( mbedtls_dhm_context *ctx, int x_size, + unsigned char *output, size_t *olen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function sets the prime modulus and generator. + * + * \note This function can be used to set \c ctx->P, \c ctx->G + * in preparation for mbedtls_dhm_make_params(). + * + * \param ctx The DHM context to configure. This must be initialized. + * \param P The MPI holding the DHM prime modulus. This must be + * an initialized MPI. + * \param G The MPI holding the DHM generator. This must be an + * initialized MPI. + * + * \return \c 0 if successful. + * \return An \c MBEDTLS_ERR_DHM_XXX error code on failure. + */ +int mbedtls_dhm_set_group( mbedtls_dhm_context *ctx, + const mbedtls_mpi *P, + const mbedtls_mpi *G ); + +/** + * \brief This function imports the raw public value of the peer. + * + * \note In a TLS handshake, this is the how the server imports + * the Client's public DHM key. + * + * \param ctx The DHM context to use. This must be initialized and have + * its DHM parameters set, e.g. via mbedtls_dhm_set_group(). + * It may or may not already have generated its own private key. + * \param input The input buffer containing the \c G^Y value of the peer. + * This must be a readable buffer of size \p ilen Bytes. + * \param ilen The size of the input buffer \p input in Bytes. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_DHM_XXX error code on failure. + */ +int mbedtls_dhm_read_public( mbedtls_dhm_context *ctx, + const unsigned char *input, size_t ilen ); + +/** + * \brief This function creates a DHM key pair and exports + * the raw public key in big-endian format. + * + * \note The destination buffer is always fully written + * so as to contain a big-endian representation of G^X mod P. + * If it is larger than \c ctx->len, it is padded accordingly + * with zero-bytes at the beginning. + * + * \param ctx The DHM context to use. This must be initialized and + * have the DHM parameters set. It may or may not already + * have imported the peer's public key. + * \param x_size The private key size in Bytes. + * \param output The destination buffer. This must be a writable buffer of + * size \p olen Bytes. + * \param olen The length of the destination buffer. This must be at least + * equal to `ctx->len` (the size of \c P). + * \param f_rng The RNG function. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL + * if \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_DHM_XXX error code on failure. + */ +int mbedtls_dhm_make_public( mbedtls_dhm_context *ctx, int x_size, + unsigned char *output, size_t olen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function derives and exports the shared secret + * \c (G^Y)^X mod \c P. + * + * \note If \p f_rng is not \c NULL, it is used to blind the input as + * a countermeasure against timing attacks. Blinding is used + * only if our private key \c X is re-used, and not used + * otherwise. We recommend always passing a non-NULL + * \p f_rng argument. + * + * \param ctx The DHM context to use. This must be initialized + * and have its own private key generated and the peer's + * public key imported. + * \param output The buffer to write the generated shared key to. This + * must be a writable buffer of size \p output_size Bytes. + * \param output_size The size of the destination buffer. This must be at + * least the size of \c ctx->len (the size of \c P). + * \param olen On exit, holds the actual number of Bytes written. + * \param f_rng The RNG function, for blinding purposes. This may + * b \c NULL if blinding isn't needed. + * \param p_rng The RNG context. This may be \c NULL if \p f_rng + * doesn't need a context argument. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_DHM_XXX error code on failure. + */ +int mbedtls_dhm_calc_secret( mbedtls_dhm_context *ctx, + unsigned char *output, size_t output_size, size_t *olen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function frees and clears the components + * of a DHM context. + * + * \param ctx The DHM context to free and clear. This may be \c NULL, + * in which case this function is a no-op. If it is not \c NULL, + * it must point to an initialized DHM context. + */ +void mbedtls_dhm_free( mbedtls_dhm_context *ctx ); + +#if defined(MBEDTLS_ASN1_PARSE_C) +/** \ingroup x509_module */ +/** + * \brief This function parses DHM parameters in PEM or DER format. + * + * \param dhm The DHM context to import the DHM parameters into. + * This must be initialized. + * \param dhmin The input buffer. This must be a readable buffer of + * length \p dhminlen Bytes. + * \param dhminlen The size of the input buffer \p dhmin, including the + * terminating \c NULL Byte for PEM data. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX error + * code on failure. + */ +int mbedtls_dhm_parse_dhm( mbedtls_dhm_context *dhm, const unsigned char *dhmin, + size_t dhminlen ); + +#if defined(MBEDTLS_FS_IO) +/** \ingroup x509_module */ +/** + * \brief This function loads and parses DHM parameters from a file. + * + * \param dhm The DHM context to load the parameters to. + * This must be initialized. + * \param path The filename to read the DHM parameters from. + * This must not be \c NULL. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_DHM_XXX or \c MBEDTLS_ERR_PEM_XXX + * error code on failure. + */ +int mbedtls_dhm_parse_dhmfile( mbedtls_dhm_context *dhm, const char *path ); +#endif /* MBEDTLS_FS_IO */ +#endif /* MBEDTLS_ASN1_PARSE_C */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief The DMH checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_dhm_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ +#ifdef __cplusplus +} +#endif + +/** + * RFC 3526, RFC 5114 and RFC 7919 standardize a number of + * Diffie-Hellman groups, some of which are included here + * for use within the SSL/TLS module and the user's convenience + * when configuring the Diffie-Hellman parameters by hand + * through \c mbedtls_ssl_conf_dh_param. + * + * The following lists the source of the above groups in the standards: + * - RFC 5114 section 2.2: 2048-bit MODP Group with 224-bit Prime Order Subgroup + * - RFC 3526 section 3: 2048-bit MODP Group + * - RFC 3526 section 4: 3072-bit MODP Group + * - RFC 3526 section 5: 4096-bit MODP Group + * - RFC 7919 section A.1: ffdhe2048 + * - RFC 7919 section A.2: ffdhe3072 + * - RFC 7919 section A.3: ffdhe4096 + * - RFC 7919 section A.4: ffdhe6144 + * - RFC 7919 section A.5: ffdhe8192 + * + * The constants with suffix "_p" denote the chosen prime moduli, while + * the constants with suffix "_g" denote the chosen generator + * of the associated prime field. + * + * The constants further suffixed with "_bin" are provided in binary format, + * while all other constants represent null-terminated strings holding the + * hexadecimal presentation of the respective numbers. + * + * The primes from RFC 3526 and RFC 7919 have been generating by the following + * trust-worthy procedure: + * - Fix N in { 2048, 3072, 4096, 6144, 8192 } and consider the N-bit number + * the first and last 64 bits are all 1, and the remaining N - 128 bits of + * which are 0x7ff...ff. + * - Add the smallest multiple of the first N - 129 bits of the binary expansion + * of pi (for RFC 5236) or e (for RFC 7919) to this intermediate bit-string + * such that the resulting integer is a safe-prime. + * - The result is the respective RFC 3526 / 7919 prime, and the corresponding + * generator is always chosen to be 2 (which is a square for these prime, + * hence the corresponding subgroup has order (p-1)/2 and avoids leaking a + * bit in the private exponent). + * + */ + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) + +/** + * \warning The origin of the primes in RFC 5114 is not documented and + * their use therefore constitutes a security risk! + * + * \deprecated The hex-encoded primes from RFC 5114 are deprecated and are + * likely to be removed in a future version of the library without + * replacement. + */ + +/** + * The hexadecimal presentation of the prime underlying the + * 2048-bit MODP Group with 224-bit Prime Order Subgroup, as defined + * in <em>RFC-5114: Additional Diffie-Hellman Groups for Use with + * IETF Standards</em>. + */ +#define MBEDTLS_DHM_RFC5114_MODP_2048_P \ + MBEDTLS_DEPRECATED_STRING_CONSTANT( \ + "AD107E1E9123A9D0D660FAA79559C51FA20D64E5683B9FD1" \ + "B54B1597B61D0A75E6FA141DF95A56DBAF9A3C407BA1DF15" \ + "EB3D688A309C180E1DE6B85A1274A0A66D3F8152AD6AC212" \ + "9037C9EDEFDA4DF8D91E8FEF55B7394B7AD5B7D0B6C12207" \ + "C9F98D11ED34DBF6C6BA0B2C8BBC27BE6A00E0A0B9C49708" \ + "B3BF8A317091883681286130BC8985DB1602E714415D9330" \ + "278273C7DE31EFDC7310F7121FD5A07415987D9ADC0A486D" \ + "CDF93ACC44328387315D75E198C641A480CD86A1B9E587E8" \ + "BE60E69CC928B2B9C52172E413042E9B23F10B0E16E79763" \ + "C9B53DCF4BA80A29E3FB73C16B8E75B97EF363E2FFA31F71" \ + "CF9DE5384E71B81C0AC4DFFE0C10E64F" ) + +/** + * The hexadecimal presentation of the chosen generator of the 2048-bit MODP + * Group with 224-bit Prime Order Subgroup, as defined in <em>RFC-5114: + * Additional Diffie-Hellman Groups for Use with IETF Standards</em>. + */ +#define MBEDTLS_DHM_RFC5114_MODP_2048_G \ + MBEDTLS_DEPRECATED_STRING_CONSTANT( \ + "AC4032EF4F2D9AE39DF30B5C8FFDAC506CDEBE7B89998CAF" \ + "74866A08CFE4FFE3A6824A4E10B9A6F0DD921F01A70C4AFA" \ + "AB739D7700C29F52C57DB17C620A8652BE5E9001A8D66AD7" \ + "C17669101999024AF4D027275AC1348BB8A762D0521BC98A" \ + "E247150422EA1ED409939D54DA7460CDB5F6C6B250717CBE" \ + "F180EB34118E98D119529A45D6F834566E3025E316A330EF" \ + "BB77A86F0C1AB15B051AE3D428C8F8ACB70A8137150B8EEB" \ + "10E183EDD19963DDD9E263E4770589EF6AA21E7F5F2FF381" \ + "B539CCE3409D13CD566AFBB48D6C019181E1BCFE94B30269" \ + "EDFE72FE9B6AA4BD7B5A0F1C71CFFF4C19C418E1F6EC0179" \ + "81BC087F2A7065B384B890D3191F2BFA" ) + +/** + * The hexadecimal presentation of the prime underlying the 2048-bit MODP + * Group, as defined in <em>RFC-3526: More Modular Exponential (MODP) + * Diffie-Hellman groups for Internet Key Exchange (IKE)</em>. + * + * \deprecated The hex-encoded primes from RFC 3625 are deprecated and + * superseded by the corresponding macros providing them as + * binary constants. Their hex-encoded constants are likely + * to be removed in a future version of the library. + * + */ +#define MBEDTLS_DHM_RFC3526_MODP_2048_P \ + MBEDTLS_DEPRECATED_STRING_CONSTANT( \ + "FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD1" \ + "29024E088A67CC74020BBEA63B139B22514A08798E3404DD" \ + "EF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245" \ + "E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7ED" \ + "EE386BFB5A899FA5AE9F24117C4B1FE649286651ECE45B3D" \ + "C2007CB8A163BF0598DA48361C55D39A69163FA8FD24CF5F" \ + "83655D23DCA3AD961C62F356208552BB9ED529077096966D" \ + "670C354E4ABC9804F1746C08CA18217C32905E462E36CE3B" \ + "E39E772C180E86039B2783A2EC07A28FB5C55DF06F4C52C9" \ + "DE2BCBF6955817183995497CEA956AE515D2261898FA0510" \ + "15728E5A8AACAA68FFFFFFFFFFFFFFFF" ) + +/** + * The hexadecimal presentation of the chosen generator of the 2048-bit MODP + * Group, as defined in <em>RFC-3526: More Modular Exponential (MODP) + * Diffie-Hellman groups for Internet Key Exchange (IKE)</em>. + */ +#define MBEDTLS_DHM_RFC3526_MODP_2048_G \ + MBEDTLS_DEPRECATED_STRING_CONSTANT( "02" ) + +/** + * The hexadecimal presentation of the prime underlying the 3072-bit MODP + * Group, as defined in <em>RFC-3072: More Modular Exponential (MODP) + * Diffie-Hellman groups for Internet Key Exchange (IKE)</em>. + */ +#define MBEDTLS_DHM_RFC3526_MODP_3072_P \ + MBEDTLS_DEPRECATED_STRING_CONSTANT( \ + "FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD1" \ + "29024E088A67CC74020BBEA63B139B22514A08798E3404DD" \ + "EF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245" \ + "E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7ED" \ + "EE386BFB5A899FA5AE9F24117C4B1FE649286651ECE45B3D" \ + "C2007CB8A163BF0598DA48361C55D39A69163FA8FD24CF5F" \ + "83655D23DCA3AD961C62F356208552BB9ED529077096966D" \ + "670C354E4ABC9804F1746C08CA18217C32905E462E36CE3B" \ + "E39E772C180E86039B2783A2EC07A28FB5C55DF06F4C52C9" \ + "DE2BCBF6955817183995497CEA956AE515D2261898FA0510" \ + "15728E5A8AAAC42DAD33170D04507A33A85521ABDF1CBA64" \ + "ECFB850458DBEF0A8AEA71575D060C7DB3970F85A6E1E4C7" \ + "ABF5AE8CDB0933D71E8C94E04A25619DCEE3D2261AD2EE6B" \ + "F12FFA06D98A0864D87602733EC86A64521F2B18177B200C" \ + "BBE117577A615D6C770988C0BAD946E208E24FA074E5AB31" \ + "43DB5BFCE0FD108E4B82D120A93AD2CAFFFFFFFFFFFFFFFF" ) + +/** + * The hexadecimal presentation of the chosen generator of the 3072-bit MODP + * Group, as defined in <em>RFC-3526: More Modular Exponential (MODP) + * Diffie-Hellman groups for Internet Key Exchange (IKE)</em>. + */ +#define MBEDTLS_DHM_RFC3526_MODP_3072_G \ + MBEDTLS_DEPRECATED_STRING_CONSTANT( "02" ) + +/** + * The hexadecimal presentation of the prime underlying the 4096-bit MODP + * Group, as defined in <em>RFC-3526: More Modular Exponential (MODP) + * Diffie-Hellman groups for Internet Key Exchange (IKE)</em>. + */ +#define MBEDTLS_DHM_RFC3526_MODP_4096_P \ + MBEDTLS_DEPRECATED_STRING_CONSTANT( \ + "FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD1" \ + "29024E088A67CC74020BBEA63B139B22514A08798E3404DD" \ + "EF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245" \ + "E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7ED" \ + "EE386BFB5A899FA5AE9F24117C4B1FE649286651ECE45B3D" \ + "C2007CB8A163BF0598DA48361C55D39A69163FA8FD24CF5F" \ + "83655D23DCA3AD961C62F356208552BB9ED529077096966D" \ + "670C354E4ABC9804F1746C08CA18217C32905E462E36CE3B" \ + "E39E772C180E86039B2783A2EC07A28FB5C55DF06F4C52C9" \ + "DE2BCBF6955817183995497CEA956AE515D2261898FA0510" \ + "15728E5A8AAAC42DAD33170D04507A33A85521ABDF1CBA64" \ + "ECFB850458DBEF0A8AEA71575D060C7DB3970F85A6E1E4C7" \ + "ABF5AE8CDB0933D71E8C94E04A25619DCEE3D2261AD2EE6B" \ + "F12FFA06D98A0864D87602733EC86A64521F2B18177B200C" \ + "BBE117577A615D6C770988C0BAD946E208E24FA074E5AB31" \ + "43DB5BFCE0FD108E4B82D120A92108011A723C12A787E6D7" \ + "88719A10BDBA5B2699C327186AF4E23C1A946834B6150BDA" \ + "2583E9CA2AD44CE8DBBBC2DB04DE8EF92E8EFC141FBECAA6" \ + "287C59474E6BC05D99B2964FA090C3A2233BA186515BE7ED" \ + "1F612970CEE2D7AFB81BDD762170481CD0069127D5B05AA9" \ + "93B4EA988D8FDDC186FFB7DC90A6C08F4DF435C934063199" \ + "FFFFFFFFFFFFFFFF" ) + +/** + * The hexadecimal presentation of the chosen generator of the 4096-bit MODP + * Group, as defined in <em>RFC-3526: More Modular Exponential (MODP) + * Diffie-Hellman groups for Internet Key Exchange (IKE)</em>. + */ +#define MBEDTLS_DHM_RFC3526_MODP_4096_G \ + MBEDTLS_DEPRECATED_STRING_CONSTANT( "02" ) + +#endif /* MBEDTLS_DEPRECATED_REMOVED */ + +/* + * Trustworthy DHM parameters in binary form + */ + +#define MBEDTLS_DHM_RFC3526_MODP_2048_P_BIN { \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \ + 0xC9, 0x0F, 0xDA, 0xA2, 0x21, 0x68, 0xC2, 0x34, \ + 0xC4, 0xC6, 0x62, 0x8B, 0x80, 0xDC, 0x1C, 0xD1, \ + 0x29, 0x02, 0x4E, 0x08, 0x8A, 0x67, 0xCC, 0x74, \ + 0x02, 0x0B, 0xBE, 0xA6, 0x3B, 0x13, 0x9B, 0x22, \ + 0x51, 0x4A, 0x08, 0x79, 0x8E, 0x34, 0x04, 0xDD, \ + 0xEF, 0x95, 0x19, 0xB3, 0xCD, 0x3A, 0x43, 0x1B, \ + 0x30, 0x2B, 0x0A, 0x6D, 0xF2, 0x5F, 0x14, 0x37, \ + 0x4F, 0xE1, 0x35, 0x6D, 0x6D, 0x51, 0xC2, 0x45, \ + 0xE4, 0x85, 0xB5, 0x76, 0x62, 0x5E, 0x7E, 0xC6, \ + 0xF4, 0x4C, 0x42, 0xE9, 0xA6, 0x37, 0xED, 0x6B, \ + 0x0B, 0xFF, 0x5C, 0xB6, 0xF4, 0x06, 0xB7, 0xED, \ + 0xEE, 0x38, 0x6B, 0xFB, 0x5A, 0x89, 0x9F, 0xA5, \ + 0xAE, 0x9F, 0x24, 0x11, 0x7C, 0x4B, 0x1F, 0xE6, \ + 0x49, 0x28, 0x66, 0x51, 0xEC, 0xE4, 0x5B, 0x3D, \ + 0xC2, 0x00, 0x7C, 0xB8, 0xA1, 0x63, 0xBF, 0x05, \ + 0x98, 0xDA, 0x48, 0x36, 0x1C, 0x55, 0xD3, 0x9A, \ + 0x69, 0x16, 0x3F, 0xA8, 0xFD, 0x24, 0xCF, 0x5F, \ + 0x83, 0x65, 0x5D, 0x23, 0xDC, 0xA3, 0xAD, 0x96, \ + 0x1C, 0x62, 0xF3, 0x56, 0x20, 0x85, 0x52, 0xBB, \ + 0x9E, 0xD5, 0x29, 0x07, 0x70, 0x96, 0x96, 0x6D, \ + 0x67, 0x0C, 0x35, 0x4E, 0x4A, 0xBC, 0x98, 0x04, \ + 0xF1, 0x74, 0x6C, 0x08, 0xCA, 0x18, 0x21, 0x7C, \ + 0x32, 0x90, 0x5E, 0x46, 0x2E, 0x36, 0xCE, 0x3B, \ + 0xE3, 0x9E, 0x77, 0x2C, 0x18, 0x0E, 0x86, 0x03, \ + 0x9B, 0x27, 0x83, 0xA2, 0xEC, 0x07, 0xA2, 0x8F, \ + 0xB5, 0xC5, 0x5D, 0xF0, 0x6F, 0x4C, 0x52, 0xC9, \ + 0xDE, 0x2B, 0xCB, 0xF6, 0x95, 0x58, 0x17, 0x18, \ + 0x39, 0x95, 0x49, 0x7C, 0xEA, 0x95, 0x6A, 0xE5, \ + 0x15, 0xD2, 0x26, 0x18, 0x98, 0xFA, 0x05, 0x10, \ + 0x15, 0x72, 0x8E, 0x5A, 0x8A, 0xAC, 0xAA, 0x68, \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } + +#define MBEDTLS_DHM_RFC3526_MODP_2048_G_BIN { 0x02 } + +#define MBEDTLS_DHM_RFC3526_MODP_3072_P_BIN { \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \ + 0xC9, 0x0F, 0xDA, 0xA2, 0x21, 0x68, 0xC2, 0x34, \ + 0xC4, 0xC6, 0x62, 0x8B, 0x80, 0xDC, 0x1C, 0xD1, \ + 0x29, 0x02, 0x4E, 0x08, 0x8A, 0x67, 0xCC, 0x74, \ + 0x02, 0x0B, 0xBE, 0xA6, 0x3B, 0x13, 0x9B, 0x22, \ + 0x51, 0x4A, 0x08, 0x79, 0x8E, 0x34, 0x04, 0xDD, \ + 0xEF, 0x95, 0x19, 0xB3, 0xCD, 0x3A, 0x43, 0x1B, \ + 0x30, 0x2B, 0x0A, 0x6D, 0xF2, 0x5F, 0x14, 0x37, \ + 0x4F, 0xE1, 0x35, 0x6D, 0x6D, 0x51, 0xC2, 0x45, \ + 0xE4, 0x85, 0xB5, 0x76, 0x62, 0x5E, 0x7E, 0xC6, \ + 0xF4, 0x4C, 0x42, 0xE9, 0xA6, 0x37, 0xED, 0x6B, \ + 0x0B, 0xFF, 0x5C, 0xB6, 0xF4, 0x06, 0xB7, 0xED, \ + 0xEE, 0x38, 0x6B, 0xFB, 0x5A, 0x89, 0x9F, 0xA5, \ + 0xAE, 0x9F, 0x24, 0x11, 0x7C, 0x4B, 0x1F, 0xE6, \ + 0x49, 0x28, 0x66, 0x51, 0xEC, 0xE4, 0x5B, 0x3D, \ + 0xC2, 0x00, 0x7C, 0xB8, 0xA1, 0x63, 0xBF, 0x05, \ + 0x98, 0xDA, 0x48, 0x36, 0x1C, 0x55, 0xD3, 0x9A, \ + 0x69, 0x16, 0x3F, 0xA8, 0xFD, 0x24, 0xCF, 0x5F, \ + 0x83, 0x65, 0x5D, 0x23, 0xDC, 0xA3, 0xAD, 0x96, \ + 0x1C, 0x62, 0xF3, 0x56, 0x20, 0x85, 0x52, 0xBB, \ + 0x9E, 0xD5, 0x29, 0x07, 0x70, 0x96, 0x96, 0x6D, \ + 0x67, 0x0C, 0x35, 0x4E, 0x4A, 0xBC, 0x98, 0x04, \ + 0xF1, 0x74, 0x6C, 0x08, 0xCA, 0x18, 0x21, 0x7C, \ + 0x32, 0x90, 0x5E, 0x46, 0x2E, 0x36, 0xCE, 0x3B, \ + 0xE3, 0x9E, 0x77, 0x2C, 0x18, 0x0E, 0x86, 0x03, \ + 0x9B, 0x27, 0x83, 0xA2, 0xEC, 0x07, 0xA2, 0x8F, \ + 0xB5, 0xC5, 0x5D, 0xF0, 0x6F, 0x4C, 0x52, 0xC9, \ + 0xDE, 0x2B, 0xCB, 0xF6, 0x95, 0x58, 0x17, 0x18, \ + 0x39, 0x95, 0x49, 0x7C, 0xEA, 0x95, 0x6A, 0xE5, \ + 0x15, 0xD2, 0x26, 0x18, 0x98, 0xFA, 0x05, 0x10, \ + 0x15, 0x72, 0x8E, 0x5A, 0x8A, 0xAA, 0xC4, 0x2D, \ + 0xAD, 0x33, 0x17, 0x0D, 0x04, 0x50, 0x7A, 0x33, \ + 0xA8, 0x55, 0x21, 0xAB, 0xDF, 0x1C, 0xBA, 0x64, \ + 0xEC, 0xFB, 0x85, 0x04, 0x58, 0xDB, 0xEF, 0x0A, \ + 0x8A, 0xEA, 0x71, 0x57, 0x5D, 0x06, 0x0C, 0x7D, \ + 0xB3, 0x97, 0x0F, 0x85, 0xA6, 0xE1, 0xE4, 0xC7, \ + 0xAB, 0xF5, 0xAE, 0x8C, 0xDB, 0x09, 0x33, 0xD7, \ + 0x1E, 0x8C, 0x94, 0xE0, 0x4A, 0x25, 0x61, 0x9D, \ + 0xCE, 0xE3, 0xD2, 0x26, 0x1A, 0xD2, 0xEE, 0x6B, \ + 0xF1, 0x2F, 0xFA, 0x06, 0xD9, 0x8A, 0x08, 0x64, \ + 0xD8, 0x76, 0x02, 0x73, 0x3E, 0xC8, 0x6A, 0x64, \ + 0x52, 0x1F, 0x2B, 0x18, 0x17, 0x7B, 0x20, 0x0C, \ + 0xBB, 0xE1, 0x17, 0x57, 0x7A, 0x61, 0x5D, 0x6C, \ + 0x77, 0x09, 0x88, 0xC0, 0xBA, 0xD9, 0x46, 0xE2, \ + 0x08, 0xE2, 0x4F, 0xA0, 0x74, 0xE5, 0xAB, 0x31, \ + 0x43, 0xDB, 0x5B, 0xFC, 0xE0, 0xFD, 0x10, 0x8E, \ + 0x4B, 0x82, 0xD1, 0x20, 0xA9, 0x3A, 0xD2, 0xCA, \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } + +#define MBEDTLS_DHM_RFC3526_MODP_3072_G_BIN { 0x02 } + +#define MBEDTLS_DHM_RFC3526_MODP_4096_P_BIN { \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \ + 0xC9, 0x0F, 0xDA, 0xA2, 0x21, 0x68, 0xC2, 0x34, \ + 0xC4, 0xC6, 0x62, 0x8B, 0x80, 0xDC, 0x1C, 0xD1, \ + 0x29, 0x02, 0x4E, 0x08, 0x8A, 0x67, 0xCC, 0x74, \ + 0x02, 0x0B, 0xBE, 0xA6, 0x3B, 0x13, 0x9B, 0x22, \ + 0x51, 0x4A, 0x08, 0x79, 0x8E, 0x34, 0x04, 0xDD, \ + 0xEF, 0x95, 0x19, 0xB3, 0xCD, 0x3A, 0x43, 0x1B, \ + 0x30, 0x2B, 0x0A, 0x6D, 0xF2, 0x5F, 0x14, 0x37, \ + 0x4F, 0xE1, 0x35, 0x6D, 0x6D, 0x51, 0xC2, 0x45, \ + 0xE4, 0x85, 0xB5, 0x76, 0x62, 0x5E, 0x7E, 0xC6, \ + 0xF4, 0x4C, 0x42, 0xE9, 0xA6, 0x37, 0xED, 0x6B, \ + 0x0B, 0xFF, 0x5C, 0xB6, 0xF4, 0x06, 0xB7, 0xED, \ + 0xEE, 0x38, 0x6B, 0xFB, 0x5A, 0x89, 0x9F, 0xA5, \ + 0xAE, 0x9F, 0x24, 0x11, 0x7C, 0x4B, 0x1F, 0xE6, \ + 0x49, 0x28, 0x66, 0x51, 0xEC, 0xE4, 0x5B, 0x3D, \ + 0xC2, 0x00, 0x7C, 0xB8, 0xA1, 0x63, 0xBF, 0x05, \ + 0x98, 0xDA, 0x48, 0x36, 0x1C, 0x55, 0xD3, 0x9A, \ + 0x69, 0x16, 0x3F, 0xA8, 0xFD, 0x24, 0xCF, 0x5F, \ + 0x83, 0x65, 0x5D, 0x23, 0xDC, 0xA3, 0xAD, 0x96, \ + 0x1C, 0x62, 0xF3, 0x56, 0x20, 0x85, 0x52, 0xBB, \ + 0x9E, 0xD5, 0x29, 0x07, 0x70, 0x96, 0x96, 0x6D, \ + 0x67, 0x0C, 0x35, 0x4E, 0x4A, 0xBC, 0x98, 0x04, \ + 0xF1, 0x74, 0x6C, 0x08, 0xCA, 0x18, 0x21, 0x7C, \ + 0x32, 0x90, 0x5E, 0x46, 0x2E, 0x36, 0xCE, 0x3B, \ + 0xE3, 0x9E, 0x77, 0x2C, 0x18, 0x0E, 0x86, 0x03, \ + 0x9B, 0x27, 0x83, 0xA2, 0xEC, 0x07, 0xA2, 0x8F, \ + 0xB5, 0xC5, 0x5D, 0xF0, 0x6F, 0x4C, 0x52, 0xC9, \ + 0xDE, 0x2B, 0xCB, 0xF6, 0x95, 0x58, 0x17, 0x18, \ + 0x39, 0x95, 0x49, 0x7C, 0xEA, 0x95, 0x6A, 0xE5, \ + 0x15, 0xD2, 0x26, 0x18, 0x98, 0xFA, 0x05, 0x10, \ + 0x15, 0x72, 0x8E, 0x5A, 0x8A, 0xAA, 0xC4, 0x2D, \ + 0xAD, 0x33, 0x17, 0x0D, 0x04, 0x50, 0x7A, 0x33, \ + 0xA8, 0x55, 0x21, 0xAB, 0xDF, 0x1C, 0xBA, 0x64, \ + 0xEC, 0xFB, 0x85, 0x04, 0x58, 0xDB, 0xEF, 0x0A, \ + 0x8A, 0xEA, 0x71, 0x57, 0x5D, 0x06, 0x0C, 0x7D, \ + 0xB3, 0x97, 0x0F, 0x85, 0xA6, 0xE1, 0xE4, 0xC7, \ + 0xAB, 0xF5, 0xAE, 0x8C, 0xDB, 0x09, 0x33, 0xD7, \ + 0x1E, 0x8C, 0x94, 0xE0, 0x4A, 0x25, 0x61, 0x9D, \ + 0xCE, 0xE3, 0xD2, 0x26, 0x1A, 0xD2, 0xEE, 0x6B, \ + 0xF1, 0x2F, 0xFA, 0x06, 0xD9, 0x8A, 0x08, 0x64, \ + 0xD8, 0x76, 0x02, 0x73, 0x3E, 0xC8, 0x6A, 0x64, \ + 0x52, 0x1F, 0x2B, 0x18, 0x17, 0x7B, 0x20, 0x0C, \ + 0xBB, 0xE1, 0x17, 0x57, 0x7A, 0x61, 0x5D, 0x6C, \ + 0x77, 0x09, 0x88, 0xC0, 0xBA, 0xD9, 0x46, 0xE2, \ + 0x08, 0xE2, 0x4F, 0xA0, 0x74, 0xE5, 0xAB, 0x31, \ + 0x43, 0xDB, 0x5B, 0xFC, 0xE0, 0xFD, 0x10, 0x8E, \ + 0x4B, 0x82, 0xD1, 0x20, 0xA9, 0x21, 0x08, 0x01, \ + 0x1A, 0x72, 0x3C, 0x12, 0xA7, 0x87, 0xE6, 0xD7, \ + 0x88, 0x71, 0x9A, 0x10, 0xBD, 0xBA, 0x5B, 0x26, \ + 0x99, 0xC3, 0x27, 0x18, 0x6A, 0xF4, 0xE2, 0x3C, \ + 0x1A, 0x94, 0x68, 0x34, 0xB6, 0x15, 0x0B, 0xDA, \ + 0x25, 0x83, 0xE9, 0xCA, 0x2A, 0xD4, 0x4C, 0xE8, \ + 0xDB, 0xBB, 0xC2, 0xDB, 0x04, 0xDE, 0x8E, 0xF9, \ + 0x2E, 0x8E, 0xFC, 0x14, 0x1F, 0xBE, 0xCA, 0xA6, \ + 0x28, 0x7C, 0x59, 0x47, 0x4E, 0x6B, 0xC0, 0x5D, \ + 0x99, 0xB2, 0x96, 0x4F, 0xA0, 0x90, 0xC3, 0xA2, \ + 0x23, 0x3B, 0xA1, 0x86, 0x51, 0x5B, 0xE7, 0xED, \ + 0x1F, 0x61, 0x29, 0x70, 0xCE, 0xE2, 0xD7, 0xAF, \ + 0xB8, 0x1B, 0xDD, 0x76, 0x21, 0x70, 0x48, 0x1C, \ + 0xD0, 0x06, 0x91, 0x27, 0xD5, 0xB0, 0x5A, 0xA9, \ + 0x93, 0xB4, 0xEA, 0x98, 0x8D, 0x8F, 0xDD, 0xC1, \ + 0x86, 0xFF, 0xB7, 0xDC, 0x90, 0xA6, 0xC0, 0x8F, \ + 0x4D, 0xF4, 0x35, 0xC9, 0x34, 0x06, 0x31, 0x99, \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } + +#define MBEDTLS_DHM_RFC3526_MODP_4096_G_BIN { 0x02 } + +#define MBEDTLS_DHM_RFC7919_FFDHE2048_P_BIN { \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \ + 0xAD, 0xF8, 0x54, 0x58, 0xA2, 0xBB, 0x4A, 0x9A, \ + 0xAF, 0xDC, 0x56, 0x20, 0x27, 0x3D, 0x3C, 0xF1, \ + 0xD8, 0xB9, 0xC5, 0x83, 0xCE, 0x2D, 0x36, 0x95, \ + 0xA9, 0xE1, 0x36, 0x41, 0x14, 0x64, 0x33, 0xFB, \ + 0xCC, 0x93, 0x9D, 0xCE, 0x24, 0x9B, 0x3E, 0xF9, \ + 0x7D, 0x2F, 0xE3, 0x63, 0x63, 0x0C, 0x75, 0xD8, \ + 0xF6, 0x81, 0xB2, 0x02, 0xAE, 0xC4, 0x61, 0x7A, \ + 0xD3, 0xDF, 0x1E, 0xD5, 0xD5, 0xFD, 0x65, 0x61, \ + 0x24, 0x33, 0xF5, 0x1F, 0x5F, 0x06, 0x6E, 0xD0, \ + 0x85, 0x63, 0x65, 0x55, 0x3D, 0xED, 0x1A, 0xF3, \ + 0xB5, 0x57, 0x13, 0x5E, 0x7F, 0x57, 0xC9, 0x35, \ + 0x98, 0x4F, 0x0C, 0x70, 0xE0, 0xE6, 0x8B, 0x77, \ + 0xE2, 0xA6, 0x89, 0xDA, 0xF3, 0xEF, 0xE8, 0x72, \ + 0x1D, 0xF1, 0x58, 0xA1, 0x36, 0xAD, 0xE7, 0x35, \ + 0x30, 0xAC, 0xCA, 0x4F, 0x48, 0x3A, 0x79, 0x7A, \ + 0xBC, 0x0A, 0xB1, 0x82, 0xB3, 0x24, 0xFB, 0x61, \ + 0xD1, 0x08, 0xA9, 0x4B, 0xB2, 0xC8, 0xE3, 0xFB, \ + 0xB9, 0x6A, 0xDA, 0xB7, 0x60, 0xD7, 0xF4, 0x68, \ + 0x1D, 0x4F, 0x42, 0xA3, 0xDE, 0x39, 0x4D, 0xF4, \ + 0xAE, 0x56, 0xED, 0xE7, 0x63, 0x72, 0xBB, 0x19, \ + 0x0B, 0x07, 0xA7, 0xC8, 0xEE, 0x0A, 0x6D, 0x70, \ + 0x9E, 0x02, 0xFC, 0xE1, 0xCD, 0xF7, 0xE2, 0xEC, \ + 0xC0, 0x34, 0x04, 0xCD, 0x28, 0x34, 0x2F, 0x61, \ + 0x91, 0x72, 0xFE, 0x9C, 0xE9, 0x85, 0x83, 0xFF, \ + 0x8E, 0x4F, 0x12, 0x32, 0xEE, 0xF2, 0x81, 0x83, \ + 0xC3, 0xFE, 0x3B, 0x1B, 0x4C, 0x6F, 0xAD, 0x73, \ + 0x3B, 0xB5, 0xFC, 0xBC, 0x2E, 0xC2, 0x20, 0x05, \ + 0xC5, 0x8E, 0xF1, 0x83, 0x7D, 0x16, 0x83, 0xB2, \ + 0xC6, 0xF3, 0x4A, 0x26, 0xC1, 0xB2, 0xEF, 0xFA, \ + 0x88, 0x6B, 0x42, 0x38, 0x61, 0x28, 0x5C, 0x97, \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, } + +#define MBEDTLS_DHM_RFC7919_FFDHE2048_G_BIN { 0x02 } + +#define MBEDTLS_DHM_RFC7919_FFDHE3072_P_BIN { \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \ + 0xAD, 0xF8, 0x54, 0x58, 0xA2, 0xBB, 0x4A, 0x9A, \ + 0xAF, 0xDC, 0x56, 0x20, 0x27, 0x3D, 0x3C, 0xF1, \ + 0xD8, 0xB9, 0xC5, 0x83, 0xCE, 0x2D, 0x36, 0x95, \ + 0xA9, 0xE1, 0x36, 0x41, 0x14, 0x64, 0x33, 0xFB, \ + 0xCC, 0x93, 0x9D, 0xCE, 0x24, 0x9B, 0x3E, 0xF9, \ + 0x7D, 0x2F, 0xE3, 0x63, 0x63, 0x0C, 0x75, 0xD8, \ + 0xF6, 0x81, 0xB2, 0x02, 0xAE, 0xC4, 0x61, 0x7A, \ + 0xD3, 0xDF, 0x1E, 0xD5, 0xD5, 0xFD, 0x65, 0x61, \ + 0x24, 0x33, 0xF5, 0x1F, 0x5F, 0x06, 0x6E, 0xD0, \ + 0x85, 0x63, 0x65, 0x55, 0x3D, 0xED, 0x1A, 0xF3, \ + 0xB5, 0x57, 0x13, 0x5E, 0x7F, 0x57, 0xC9, 0x35, \ + 0x98, 0x4F, 0x0C, 0x70, 0xE0, 0xE6, 0x8B, 0x77, \ + 0xE2, 0xA6, 0x89, 0xDA, 0xF3, 0xEF, 0xE8, 0x72, \ + 0x1D, 0xF1, 0x58, 0xA1, 0x36, 0xAD, 0xE7, 0x35, \ + 0x30, 0xAC, 0xCA, 0x4F, 0x48, 0x3A, 0x79, 0x7A, \ + 0xBC, 0x0A, 0xB1, 0x82, 0xB3, 0x24, 0xFB, 0x61, \ + 0xD1, 0x08, 0xA9, 0x4B, 0xB2, 0xC8, 0xE3, 0xFB, \ + 0xB9, 0x6A, 0xDA, 0xB7, 0x60, 0xD7, 0xF4, 0x68, \ + 0x1D, 0x4F, 0x42, 0xA3, 0xDE, 0x39, 0x4D, 0xF4, \ + 0xAE, 0x56, 0xED, 0xE7, 0x63, 0x72, 0xBB, 0x19, \ + 0x0B, 0x07, 0xA7, 0xC8, 0xEE, 0x0A, 0x6D, 0x70, \ + 0x9E, 0x02, 0xFC, 0xE1, 0xCD, 0xF7, 0xE2, 0xEC, \ + 0xC0, 0x34, 0x04, 0xCD, 0x28, 0x34, 0x2F, 0x61, \ + 0x91, 0x72, 0xFE, 0x9C, 0xE9, 0x85, 0x83, 0xFF, \ + 0x8E, 0x4F, 0x12, 0x32, 0xEE, 0xF2, 0x81, 0x83, \ + 0xC3, 0xFE, 0x3B, 0x1B, 0x4C, 0x6F, 0xAD, 0x73, \ + 0x3B, 0xB5, 0xFC, 0xBC, 0x2E, 0xC2, 0x20, 0x05, \ + 0xC5, 0x8E, 0xF1, 0x83, 0x7D, 0x16, 0x83, 0xB2, \ + 0xC6, 0xF3, 0x4A, 0x26, 0xC1, 0xB2, 0xEF, 0xFA, \ + 0x88, 0x6B, 0x42, 0x38, 0x61, 0x1F, 0xCF, 0xDC, \ + 0xDE, 0x35, 0x5B, 0x3B, 0x65, 0x19, 0x03, 0x5B, \ + 0xBC, 0x34, 0xF4, 0xDE, 0xF9, 0x9C, 0x02, 0x38, \ + 0x61, 0xB4, 0x6F, 0xC9, 0xD6, 0xE6, 0xC9, 0x07, \ + 0x7A, 0xD9, 0x1D, 0x26, 0x91, 0xF7, 0xF7, 0xEE, \ + 0x59, 0x8C, 0xB0, 0xFA, 0xC1, 0x86, 0xD9, 0x1C, \ + 0xAE, 0xFE, 0x13, 0x09, 0x85, 0x13, 0x92, 0x70, \ + 0xB4, 0x13, 0x0C, 0x93, 0xBC, 0x43, 0x79, 0x44, \ + 0xF4, 0xFD, 0x44, 0x52, 0xE2, 0xD7, 0x4D, 0xD3, \ + 0x64, 0xF2, 0xE2, 0x1E, 0x71, 0xF5, 0x4B, 0xFF, \ + 0x5C, 0xAE, 0x82, 0xAB, 0x9C, 0x9D, 0xF6, 0x9E, \ + 0xE8, 0x6D, 0x2B, 0xC5, 0x22, 0x36, 0x3A, 0x0D, \ + 0xAB, 0xC5, 0x21, 0x97, 0x9B, 0x0D, 0xEA, 0xDA, \ + 0x1D, 0xBF, 0x9A, 0x42, 0xD5, 0xC4, 0x48, 0x4E, \ + 0x0A, 0xBC, 0xD0, 0x6B, 0xFA, 0x53, 0xDD, 0xEF, \ + 0x3C, 0x1B, 0x20, 0xEE, 0x3F, 0xD5, 0x9D, 0x7C, \ + 0x25, 0xE4, 0x1D, 0x2B, 0x66, 0xC6, 0x2E, 0x37, \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } + +#define MBEDTLS_DHM_RFC7919_FFDHE3072_G_BIN { 0x02 } + +#define MBEDTLS_DHM_RFC7919_FFDHE4096_P_BIN { \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \ + 0xAD, 0xF8, 0x54, 0x58, 0xA2, 0xBB, 0x4A, 0x9A, \ + 0xAF, 0xDC, 0x56, 0x20, 0x27, 0x3D, 0x3C, 0xF1, \ + 0xD8, 0xB9, 0xC5, 0x83, 0xCE, 0x2D, 0x36, 0x95, \ + 0xA9, 0xE1, 0x36, 0x41, 0x14, 0x64, 0x33, 0xFB, \ + 0xCC, 0x93, 0x9D, 0xCE, 0x24, 0x9B, 0x3E, 0xF9, \ + 0x7D, 0x2F, 0xE3, 0x63, 0x63, 0x0C, 0x75, 0xD8, \ + 0xF6, 0x81, 0xB2, 0x02, 0xAE, 0xC4, 0x61, 0x7A, \ + 0xD3, 0xDF, 0x1E, 0xD5, 0xD5, 0xFD, 0x65, 0x61, \ + 0x24, 0x33, 0xF5, 0x1F, 0x5F, 0x06, 0x6E, 0xD0, \ + 0x85, 0x63, 0x65, 0x55, 0x3D, 0xED, 0x1A, 0xF3, \ + 0xB5, 0x57, 0x13, 0x5E, 0x7F, 0x57, 0xC9, 0x35, \ + 0x98, 0x4F, 0x0C, 0x70, 0xE0, 0xE6, 0x8B, 0x77, \ + 0xE2, 0xA6, 0x89, 0xDA, 0xF3, 0xEF, 0xE8, 0x72, \ + 0x1D, 0xF1, 0x58, 0xA1, 0x36, 0xAD, 0xE7, 0x35, \ + 0x30, 0xAC, 0xCA, 0x4F, 0x48, 0x3A, 0x79, 0x7A, \ + 0xBC, 0x0A, 0xB1, 0x82, 0xB3, 0x24, 0xFB, 0x61, \ + 0xD1, 0x08, 0xA9, 0x4B, 0xB2, 0xC8, 0xE3, 0xFB, \ + 0xB9, 0x6A, 0xDA, 0xB7, 0x60, 0xD7, 0xF4, 0x68, \ + 0x1D, 0x4F, 0x42, 0xA3, 0xDE, 0x39, 0x4D, 0xF4, \ + 0xAE, 0x56, 0xED, 0xE7, 0x63, 0x72, 0xBB, 0x19, \ + 0x0B, 0x07, 0xA7, 0xC8, 0xEE, 0x0A, 0x6D, 0x70, \ + 0x9E, 0x02, 0xFC, 0xE1, 0xCD, 0xF7, 0xE2, 0xEC, \ + 0xC0, 0x34, 0x04, 0xCD, 0x28, 0x34, 0x2F, 0x61, \ + 0x91, 0x72, 0xFE, 0x9C, 0xE9, 0x85, 0x83, 0xFF, \ + 0x8E, 0x4F, 0x12, 0x32, 0xEE, 0xF2, 0x81, 0x83, \ + 0xC3, 0xFE, 0x3B, 0x1B, 0x4C, 0x6F, 0xAD, 0x73, \ + 0x3B, 0xB5, 0xFC, 0xBC, 0x2E, 0xC2, 0x20, 0x05, \ + 0xC5, 0x8E, 0xF1, 0x83, 0x7D, 0x16, 0x83, 0xB2, \ + 0xC6, 0xF3, 0x4A, 0x26, 0xC1, 0xB2, 0xEF, 0xFA, \ + 0x88, 0x6B, 0x42, 0x38, 0x61, 0x1F, 0xCF, 0xDC, \ + 0xDE, 0x35, 0x5B, 0x3B, 0x65, 0x19, 0x03, 0x5B, \ + 0xBC, 0x34, 0xF4, 0xDE, 0xF9, 0x9C, 0x02, 0x38, \ + 0x61, 0xB4, 0x6F, 0xC9, 0xD6, 0xE6, 0xC9, 0x07, \ + 0x7A, 0xD9, 0x1D, 0x26, 0x91, 0xF7, 0xF7, 0xEE, \ + 0x59, 0x8C, 0xB0, 0xFA, 0xC1, 0x86, 0xD9, 0x1C, \ + 0xAE, 0xFE, 0x13, 0x09, 0x85, 0x13, 0x92, 0x70, \ + 0xB4, 0x13, 0x0C, 0x93, 0xBC, 0x43, 0x79, 0x44, \ + 0xF4, 0xFD, 0x44, 0x52, 0xE2, 0xD7, 0x4D, 0xD3, \ + 0x64, 0xF2, 0xE2, 0x1E, 0x71, 0xF5, 0x4B, 0xFF, \ + 0x5C, 0xAE, 0x82, 0xAB, 0x9C, 0x9D, 0xF6, 0x9E, \ + 0xE8, 0x6D, 0x2B, 0xC5, 0x22, 0x36, 0x3A, 0x0D, \ + 0xAB, 0xC5, 0x21, 0x97, 0x9B, 0x0D, 0xEA, 0xDA, \ + 0x1D, 0xBF, 0x9A, 0x42, 0xD5, 0xC4, 0x48, 0x4E, \ + 0x0A, 0xBC, 0xD0, 0x6B, 0xFA, 0x53, 0xDD, 0xEF, \ + 0x3C, 0x1B, 0x20, 0xEE, 0x3F, 0xD5, 0x9D, 0x7C, \ + 0x25, 0xE4, 0x1D, 0x2B, 0x66, 0x9E, 0x1E, 0xF1, \ + 0x6E, 0x6F, 0x52, 0xC3, 0x16, 0x4D, 0xF4, 0xFB, \ + 0x79, 0x30, 0xE9, 0xE4, 0xE5, 0x88, 0x57, 0xB6, \ + 0xAC, 0x7D, 0x5F, 0x42, 0xD6, 0x9F, 0x6D, 0x18, \ + 0x77, 0x63, 0xCF, 0x1D, 0x55, 0x03, 0x40, 0x04, \ + 0x87, 0xF5, 0x5B, 0xA5, 0x7E, 0x31, 0xCC, 0x7A, \ + 0x71, 0x35, 0xC8, 0x86, 0xEF, 0xB4, 0x31, 0x8A, \ + 0xED, 0x6A, 0x1E, 0x01, 0x2D, 0x9E, 0x68, 0x32, \ + 0xA9, 0x07, 0x60, 0x0A, 0x91, 0x81, 0x30, 0xC4, \ + 0x6D, 0xC7, 0x78, 0xF9, 0x71, 0xAD, 0x00, 0x38, \ + 0x09, 0x29, 0x99, 0xA3, 0x33, 0xCB, 0x8B, 0x7A, \ + 0x1A, 0x1D, 0xB9, 0x3D, 0x71, 0x40, 0x00, 0x3C, \ + 0x2A, 0x4E, 0xCE, 0xA9, 0xF9, 0x8D, 0x0A, 0xCC, \ + 0x0A, 0x82, 0x91, 0xCD, 0xCE, 0xC9, 0x7D, 0xCF, \ + 0x8E, 0xC9, 0xB5, 0x5A, 0x7F, 0x88, 0xA4, 0x6B, \ + 0x4D, 0xB5, 0xA8, 0x51, 0xF4, 0x41, 0x82, 0xE1, \ + 0xC6, 0x8A, 0x00, 0x7E, 0x5E, 0x65, 0x5F, 0x6A, \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } + +#define MBEDTLS_DHM_RFC7919_FFDHE4096_G_BIN { 0x02 } + +#define MBEDTLS_DHM_RFC7919_FFDHE6144_P_BIN { \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \ + 0xAD, 0xF8, 0x54, 0x58, 0xA2, 0xBB, 0x4A, 0x9A, \ + 0xAF, 0xDC, 0x56, 0x20, 0x27, 0x3D, 0x3C, 0xF1, \ + 0xD8, 0xB9, 0xC5, 0x83, 0xCE, 0x2D, 0x36, 0x95, \ + 0xA9, 0xE1, 0x36, 0x41, 0x14, 0x64, 0x33, 0xFB, \ + 0xCC, 0x93, 0x9D, 0xCE, 0x24, 0x9B, 0x3E, 0xF9, \ + 0x7D, 0x2F, 0xE3, 0x63, 0x63, 0x0C, 0x75, 0xD8, \ + 0xF6, 0x81, 0xB2, 0x02, 0xAE, 0xC4, 0x61, 0x7A, \ + 0xD3, 0xDF, 0x1E, 0xD5, 0xD5, 0xFD, 0x65, 0x61, \ + 0x24, 0x33, 0xF5, 0x1F, 0x5F, 0x06, 0x6E, 0xD0, \ + 0x85, 0x63, 0x65, 0x55, 0x3D, 0xED, 0x1A, 0xF3, \ + 0xB5, 0x57, 0x13, 0x5E, 0x7F, 0x57, 0xC9, 0x35, \ + 0x98, 0x4F, 0x0C, 0x70, 0xE0, 0xE6, 0x8B, 0x77, \ + 0xE2, 0xA6, 0x89, 0xDA, 0xF3, 0xEF, 0xE8, 0x72, \ + 0x1D, 0xF1, 0x58, 0xA1, 0x36, 0xAD, 0xE7, 0x35, \ + 0x30, 0xAC, 0xCA, 0x4F, 0x48, 0x3A, 0x79, 0x7A, \ + 0xBC, 0x0A, 0xB1, 0x82, 0xB3, 0x24, 0xFB, 0x61, \ + 0xD1, 0x08, 0xA9, 0x4B, 0xB2, 0xC8, 0xE3, 0xFB, \ + 0xB9, 0x6A, 0xDA, 0xB7, 0x60, 0xD7, 0xF4, 0x68, \ + 0x1D, 0x4F, 0x42, 0xA3, 0xDE, 0x39, 0x4D, 0xF4, \ + 0xAE, 0x56, 0xED, 0xE7, 0x63, 0x72, 0xBB, 0x19, \ + 0x0B, 0x07, 0xA7, 0xC8, 0xEE, 0x0A, 0x6D, 0x70, \ + 0x9E, 0x02, 0xFC, 0xE1, 0xCD, 0xF7, 0xE2, 0xEC, \ + 0xC0, 0x34, 0x04, 0xCD, 0x28, 0x34, 0x2F, 0x61, \ + 0x91, 0x72, 0xFE, 0x9C, 0xE9, 0x85, 0x83, 0xFF, \ + 0x8E, 0x4F, 0x12, 0x32, 0xEE, 0xF2, 0x81, 0x83, \ + 0xC3, 0xFE, 0x3B, 0x1B, 0x4C, 0x6F, 0xAD, 0x73, \ + 0x3B, 0xB5, 0xFC, 0xBC, 0x2E, 0xC2, 0x20, 0x05, \ + 0xC5, 0x8E, 0xF1, 0x83, 0x7D, 0x16, 0x83, 0xB2, \ + 0xC6, 0xF3, 0x4A, 0x26, 0xC1, 0xB2, 0xEF, 0xFA, \ + 0x88, 0x6B, 0x42, 0x38, 0x61, 0x1F, 0xCF, 0xDC, \ + 0xDE, 0x35, 0x5B, 0x3B, 0x65, 0x19, 0x03, 0x5B, \ + 0xBC, 0x34, 0xF4, 0xDE, 0xF9, 0x9C, 0x02, 0x38, \ + 0x61, 0xB4, 0x6F, 0xC9, 0xD6, 0xE6, 0xC9, 0x07, \ + 0x7A, 0xD9, 0x1D, 0x26, 0x91, 0xF7, 0xF7, 0xEE, \ + 0x59, 0x8C, 0xB0, 0xFA, 0xC1, 0x86, 0xD9, 0x1C, \ + 0xAE, 0xFE, 0x13, 0x09, 0x85, 0x13, 0x92, 0x70, \ + 0xB4, 0x13, 0x0C, 0x93, 0xBC, 0x43, 0x79, 0x44, \ + 0xF4, 0xFD, 0x44, 0x52, 0xE2, 0xD7, 0x4D, 0xD3, \ + 0x64, 0xF2, 0xE2, 0x1E, 0x71, 0xF5, 0x4B, 0xFF, \ + 0x5C, 0xAE, 0x82, 0xAB, 0x9C, 0x9D, 0xF6, 0x9E, \ + 0xE8, 0x6D, 0x2B, 0xC5, 0x22, 0x36, 0x3A, 0x0D, \ + 0xAB, 0xC5, 0x21, 0x97, 0x9B, 0x0D, 0xEA, 0xDA, \ + 0x1D, 0xBF, 0x9A, 0x42, 0xD5, 0xC4, 0x48, 0x4E, \ + 0x0A, 0xBC, 0xD0, 0x6B, 0xFA, 0x53, 0xDD, 0xEF, \ + 0x3C, 0x1B, 0x20, 0xEE, 0x3F, 0xD5, 0x9D, 0x7C, \ + 0x25, 0xE4, 0x1D, 0x2B, 0x66, 0x9E, 0x1E, 0xF1, \ + 0x6E, 0x6F, 0x52, 0xC3, 0x16, 0x4D, 0xF4, 0xFB, \ + 0x79, 0x30, 0xE9, 0xE4, 0xE5, 0x88, 0x57, 0xB6, \ + 0xAC, 0x7D, 0x5F, 0x42, 0xD6, 0x9F, 0x6D, 0x18, \ + 0x77, 0x63, 0xCF, 0x1D, 0x55, 0x03, 0x40, 0x04, \ + 0x87, 0xF5, 0x5B, 0xA5, 0x7E, 0x31, 0xCC, 0x7A, \ + 0x71, 0x35, 0xC8, 0x86, 0xEF, 0xB4, 0x31, 0x8A, \ + 0xED, 0x6A, 0x1E, 0x01, 0x2D, 0x9E, 0x68, 0x32, \ + 0xA9, 0x07, 0x60, 0x0A, 0x91, 0x81, 0x30, 0xC4, \ + 0x6D, 0xC7, 0x78, 0xF9, 0x71, 0xAD, 0x00, 0x38, \ + 0x09, 0x29, 0x99, 0xA3, 0x33, 0xCB, 0x8B, 0x7A, \ + 0x1A, 0x1D, 0xB9, 0x3D, 0x71, 0x40, 0x00, 0x3C, \ + 0x2A, 0x4E, 0xCE, 0xA9, 0xF9, 0x8D, 0x0A, 0xCC, \ + 0x0A, 0x82, 0x91, 0xCD, 0xCE, 0xC9, 0x7D, 0xCF, \ + 0x8E, 0xC9, 0xB5, 0x5A, 0x7F, 0x88, 0xA4, 0x6B, \ + 0x4D, 0xB5, 0xA8, 0x51, 0xF4, 0x41, 0x82, 0xE1, \ + 0xC6, 0x8A, 0x00, 0x7E, 0x5E, 0x0D, 0xD9, 0x02, \ + 0x0B, 0xFD, 0x64, 0xB6, 0x45, 0x03, 0x6C, 0x7A, \ + 0x4E, 0x67, 0x7D, 0x2C, 0x38, 0x53, 0x2A, 0x3A, \ + 0x23, 0xBA, 0x44, 0x42, 0xCA, 0xF5, 0x3E, 0xA6, \ + 0x3B, 0xB4, 0x54, 0x32, 0x9B, 0x76, 0x24, 0xC8, \ + 0x91, 0x7B, 0xDD, 0x64, 0xB1, 0xC0, 0xFD, 0x4C, \ + 0xB3, 0x8E, 0x8C, 0x33, 0x4C, 0x70, 0x1C, 0x3A, \ + 0xCD, 0xAD, 0x06, 0x57, 0xFC, 0xCF, 0xEC, 0x71, \ + 0x9B, 0x1F, 0x5C, 0x3E, 0x4E, 0x46, 0x04, 0x1F, \ + 0x38, 0x81, 0x47, 0xFB, 0x4C, 0xFD, 0xB4, 0x77, \ + 0xA5, 0x24, 0x71, 0xF7, 0xA9, 0xA9, 0x69, 0x10, \ + 0xB8, 0x55, 0x32, 0x2E, 0xDB, 0x63, 0x40, 0xD8, \ + 0xA0, 0x0E, 0xF0, 0x92, 0x35, 0x05, 0x11, 0xE3, \ + 0x0A, 0xBE, 0xC1, 0xFF, 0xF9, 0xE3, 0xA2, 0x6E, \ + 0x7F, 0xB2, 0x9F, 0x8C, 0x18, 0x30, 0x23, 0xC3, \ + 0x58, 0x7E, 0x38, 0xDA, 0x00, 0x77, 0xD9, 0xB4, \ + 0x76, 0x3E, 0x4E, 0x4B, 0x94, 0xB2, 0xBB, 0xC1, \ + 0x94, 0xC6, 0x65, 0x1E, 0x77, 0xCA, 0xF9, 0x92, \ + 0xEE, 0xAA, 0xC0, 0x23, 0x2A, 0x28, 0x1B, 0xF6, \ + 0xB3, 0xA7, 0x39, 0xC1, 0x22, 0x61, 0x16, 0x82, \ + 0x0A, 0xE8, 0xDB, 0x58, 0x47, 0xA6, 0x7C, 0xBE, \ + 0xF9, 0xC9, 0x09, 0x1B, 0x46, 0x2D, 0x53, 0x8C, \ + 0xD7, 0x2B, 0x03, 0x74, 0x6A, 0xE7, 0x7F, 0x5E, \ + 0x62, 0x29, 0x2C, 0x31, 0x15, 0x62, 0xA8, 0x46, \ + 0x50, 0x5D, 0xC8, 0x2D, 0xB8, 0x54, 0x33, 0x8A, \ + 0xE4, 0x9F, 0x52, 0x35, 0xC9, 0x5B, 0x91, 0x17, \ + 0x8C, 0xCF, 0x2D, 0xD5, 0xCA, 0xCE, 0xF4, 0x03, \ + 0xEC, 0x9D, 0x18, 0x10, 0xC6, 0x27, 0x2B, 0x04, \ + 0x5B, 0x3B, 0x71, 0xF9, 0xDC, 0x6B, 0x80, 0xD6, \ + 0x3F, 0xDD, 0x4A, 0x8E, 0x9A, 0xDB, 0x1E, 0x69, \ + 0x62, 0xA6, 0x95, 0x26, 0xD4, 0x31, 0x61, 0xC1, \ + 0xA4, 0x1D, 0x57, 0x0D, 0x79, 0x38, 0xDA, 0xD4, \ + 0xA4, 0x0E, 0x32, 0x9C, 0xD0, 0xE4, 0x0E, 0x65, \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } + +#define MBEDTLS_DHM_RFC7919_FFDHE6144_G_BIN { 0x02 } + +#define MBEDTLS_DHM_RFC7919_FFDHE8192_P_BIN { \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \ + 0xAD, 0xF8, 0x54, 0x58, 0xA2, 0xBB, 0x4A, 0x9A, \ + 0xAF, 0xDC, 0x56, 0x20, 0x27, 0x3D, 0x3C, 0xF1, \ + 0xD8, 0xB9, 0xC5, 0x83, 0xCE, 0x2D, 0x36, 0x95, \ + 0xA9, 0xE1, 0x36, 0x41, 0x14, 0x64, 0x33, 0xFB, \ + 0xCC, 0x93, 0x9D, 0xCE, 0x24, 0x9B, 0x3E, 0xF9, \ + 0x7D, 0x2F, 0xE3, 0x63, 0x63, 0x0C, 0x75, 0xD8, \ + 0xF6, 0x81, 0xB2, 0x02, 0xAE, 0xC4, 0x61, 0x7A, \ + 0xD3, 0xDF, 0x1E, 0xD5, 0xD5, 0xFD, 0x65, 0x61, \ + 0x24, 0x33, 0xF5, 0x1F, 0x5F, 0x06, 0x6E, 0xD0, \ + 0x85, 0x63, 0x65, 0x55, 0x3D, 0xED, 0x1A, 0xF3, \ + 0xB5, 0x57, 0x13, 0x5E, 0x7F, 0x57, 0xC9, 0x35, \ + 0x98, 0x4F, 0x0C, 0x70, 0xE0, 0xE6, 0x8B, 0x77, \ + 0xE2, 0xA6, 0x89, 0xDA, 0xF3, 0xEF, 0xE8, 0x72, \ + 0x1D, 0xF1, 0x58, 0xA1, 0x36, 0xAD, 0xE7, 0x35, \ + 0x30, 0xAC, 0xCA, 0x4F, 0x48, 0x3A, 0x79, 0x7A, \ + 0xBC, 0x0A, 0xB1, 0x82, 0xB3, 0x24, 0xFB, 0x61, \ + 0xD1, 0x08, 0xA9, 0x4B, 0xB2, 0xC8, 0xE3, 0xFB, \ + 0xB9, 0x6A, 0xDA, 0xB7, 0x60, 0xD7, 0xF4, 0x68, \ + 0x1D, 0x4F, 0x42, 0xA3, 0xDE, 0x39, 0x4D, 0xF4, \ + 0xAE, 0x56, 0xED, 0xE7, 0x63, 0x72, 0xBB, 0x19, \ + 0x0B, 0x07, 0xA7, 0xC8, 0xEE, 0x0A, 0x6D, 0x70, \ + 0x9E, 0x02, 0xFC, 0xE1, 0xCD, 0xF7, 0xE2, 0xEC, \ + 0xC0, 0x34, 0x04, 0xCD, 0x28, 0x34, 0x2F, 0x61, \ + 0x91, 0x72, 0xFE, 0x9C, 0xE9, 0x85, 0x83, 0xFF, \ + 0x8E, 0x4F, 0x12, 0x32, 0xEE, 0xF2, 0x81, 0x83, \ + 0xC3, 0xFE, 0x3B, 0x1B, 0x4C, 0x6F, 0xAD, 0x73, \ + 0x3B, 0xB5, 0xFC, 0xBC, 0x2E, 0xC2, 0x20, 0x05, \ + 0xC5, 0x8E, 0xF1, 0x83, 0x7D, 0x16, 0x83, 0xB2, \ + 0xC6, 0xF3, 0x4A, 0x26, 0xC1, 0xB2, 0xEF, 0xFA, \ + 0x88, 0x6B, 0x42, 0x38, 0x61, 0x1F, 0xCF, 0xDC, \ + 0xDE, 0x35, 0x5B, 0x3B, 0x65, 0x19, 0x03, 0x5B, \ + 0xBC, 0x34, 0xF4, 0xDE, 0xF9, 0x9C, 0x02, 0x38, \ + 0x61, 0xB4, 0x6F, 0xC9, 0xD6, 0xE6, 0xC9, 0x07, \ + 0x7A, 0xD9, 0x1D, 0x26, 0x91, 0xF7, 0xF7, 0xEE, \ + 0x59, 0x8C, 0xB0, 0xFA, 0xC1, 0x86, 0xD9, 0x1C, \ + 0xAE, 0xFE, 0x13, 0x09, 0x85, 0x13, 0x92, 0x70, \ + 0xB4, 0x13, 0x0C, 0x93, 0xBC, 0x43, 0x79, 0x44, \ + 0xF4, 0xFD, 0x44, 0x52, 0xE2, 0xD7, 0x4D, 0xD3, \ + 0x64, 0xF2, 0xE2, 0x1E, 0x71, 0xF5, 0x4B, 0xFF, \ + 0x5C, 0xAE, 0x82, 0xAB, 0x9C, 0x9D, 0xF6, 0x9E, \ + 0xE8, 0x6D, 0x2B, 0xC5, 0x22, 0x36, 0x3A, 0x0D, \ + 0xAB, 0xC5, 0x21, 0x97, 0x9B, 0x0D, 0xEA, 0xDA, \ + 0x1D, 0xBF, 0x9A, 0x42, 0xD5, 0xC4, 0x48, 0x4E, \ + 0x0A, 0xBC, 0xD0, 0x6B, 0xFA, 0x53, 0xDD, 0xEF, \ + 0x3C, 0x1B, 0x20, 0xEE, 0x3F, 0xD5, 0x9D, 0x7C, \ + 0x25, 0xE4, 0x1D, 0x2B, 0x66, 0x9E, 0x1E, 0xF1, \ + 0x6E, 0x6F, 0x52, 0xC3, 0x16, 0x4D, 0xF4, 0xFB, \ + 0x79, 0x30, 0xE9, 0xE4, 0xE5, 0x88, 0x57, 0xB6, \ + 0xAC, 0x7D, 0x5F, 0x42, 0xD6, 0x9F, 0x6D, 0x18, \ + 0x77, 0x63, 0xCF, 0x1D, 0x55, 0x03, 0x40, 0x04, \ + 0x87, 0xF5, 0x5B, 0xA5, 0x7E, 0x31, 0xCC, 0x7A, \ + 0x71, 0x35, 0xC8, 0x86, 0xEF, 0xB4, 0x31, 0x8A, \ + 0xED, 0x6A, 0x1E, 0x01, 0x2D, 0x9E, 0x68, 0x32, \ + 0xA9, 0x07, 0x60, 0x0A, 0x91, 0x81, 0x30, 0xC4, \ + 0x6D, 0xC7, 0x78, 0xF9, 0x71, 0xAD, 0x00, 0x38, \ + 0x09, 0x29, 0x99, 0xA3, 0x33, 0xCB, 0x8B, 0x7A, \ + 0x1A, 0x1D, 0xB9, 0x3D, 0x71, 0x40, 0x00, 0x3C, \ + 0x2A, 0x4E, 0xCE, 0xA9, 0xF9, 0x8D, 0x0A, 0xCC, \ + 0x0A, 0x82, 0x91, 0xCD, 0xCE, 0xC9, 0x7D, 0xCF, \ + 0x8E, 0xC9, 0xB5, 0x5A, 0x7F, 0x88, 0xA4, 0x6B, \ + 0x4D, 0xB5, 0xA8, 0x51, 0xF4, 0x41, 0x82, 0xE1, \ + 0xC6, 0x8A, 0x00, 0x7E, 0x5E, 0x0D, 0xD9, 0x02, \ + 0x0B, 0xFD, 0x64, 0xB6, 0x45, 0x03, 0x6C, 0x7A, \ + 0x4E, 0x67, 0x7D, 0x2C, 0x38, 0x53, 0x2A, 0x3A, \ + 0x23, 0xBA, 0x44, 0x42, 0xCA, 0xF5, 0x3E, 0xA6, \ + 0x3B, 0xB4, 0x54, 0x32, 0x9B, 0x76, 0x24, 0xC8, \ + 0x91, 0x7B, 0xDD, 0x64, 0xB1, 0xC0, 0xFD, 0x4C, \ + 0xB3, 0x8E, 0x8C, 0x33, 0x4C, 0x70, 0x1C, 0x3A, \ + 0xCD, 0xAD, 0x06, 0x57, 0xFC, 0xCF, 0xEC, 0x71, \ + 0x9B, 0x1F, 0x5C, 0x3E, 0x4E, 0x46, 0x04, 0x1F, \ + 0x38, 0x81, 0x47, 0xFB, 0x4C, 0xFD, 0xB4, 0x77, \ + 0xA5, 0x24, 0x71, 0xF7, 0xA9, 0xA9, 0x69, 0x10, \ + 0xB8, 0x55, 0x32, 0x2E, 0xDB, 0x63, 0x40, 0xD8, \ + 0xA0, 0x0E, 0xF0, 0x92, 0x35, 0x05, 0x11, 0xE3, \ + 0x0A, 0xBE, 0xC1, 0xFF, 0xF9, 0xE3, 0xA2, 0x6E, \ + 0x7F, 0xB2, 0x9F, 0x8C, 0x18, 0x30, 0x23, 0xC3, \ + 0x58, 0x7E, 0x38, 0xDA, 0x00, 0x77, 0xD9, 0xB4, \ + 0x76, 0x3E, 0x4E, 0x4B, 0x94, 0xB2, 0xBB, 0xC1, \ + 0x94, 0xC6, 0x65, 0x1E, 0x77, 0xCA, 0xF9, 0x92, \ + 0xEE, 0xAA, 0xC0, 0x23, 0x2A, 0x28, 0x1B, 0xF6, \ + 0xB3, 0xA7, 0x39, 0xC1, 0x22, 0x61, 0x16, 0x82, \ + 0x0A, 0xE8, 0xDB, 0x58, 0x47, 0xA6, 0x7C, 0xBE, \ + 0xF9, 0xC9, 0x09, 0x1B, 0x46, 0x2D, 0x53, 0x8C, \ + 0xD7, 0x2B, 0x03, 0x74, 0x6A, 0xE7, 0x7F, 0x5E, \ + 0x62, 0x29, 0x2C, 0x31, 0x15, 0x62, 0xA8, 0x46, \ + 0x50, 0x5D, 0xC8, 0x2D, 0xB8, 0x54, 0x33, 0x8A, \ + 0xE4, 0x9F, 0x52, 0x35, 0xC9, 0x5B, 0x91, 0x17, \ + 0x8C, 0xCF, 0x2D, 0xD5, 0xCA, 0xCE, 0xF4, 0x03, \ + 0xEC, 0x9D, 0x18, 0x10, 0xC6, 0x27, 0x2B, 0x04, \ + 0x5B, 0x3B, 0x71, 0xF9, 0xDC, 0x6B, 0x80, 0xD6, \ + 0x3F, 0xDD, 0x4A, 0x8E, 0x9A, 0xDB, 0x1E, 0x69, \ + 0x62, 0xA6, 0x95, 0x26, 0xD4, 0x31, 0x61, 0xC1, \ + 0xA4, 0x1D, 0x57, 0x0D, 0x79, 0x38, 0xDA, 0xD4, \ + 0xA4, 0x0E, 0x32, 0x9C, 0xCF, 0xF4, 0x6A, 0xAA, \ + 0x36, 0xAD, 0x00, 0x4C, 0xF6, 0x00, 0xC8, 0x38, \ + 0x1E, 0x42, 0x5A, 0x31, 0xD9, 0x51, 0xAE, 0x64, \ + 0xFD, 0xB2, 0x3F, 0xCE, 0xC9, 0x50, 0x9D, 0x43, \ + 0x68, 0x7F, 0xEB, 0x69, 0xED, 0xD1, 0xCC, 0x5E, \ + 0x0B, 0x8C, 0xC3, 0xBD, 0xF6, 0x4B, 0x10, 0xEF, \ + 0x86, 0xB6, 0x31, 0x42, 0xA3, 0xAB, 0x88, 0x29, \ + 0x55, 0x5B, 0x2F, 0x74, 0x7C, 0x93, 0x26, 0x65, \ + 0xCB, 0x2C, 0x0F, 0x1C, 0xC0, 0x1B, 0xD7, 0x02, \ + 0x29, 0x38, 0x88, 0x39, 0xD2, 0xAF, 0x05, 0xE4, \ + 0x54, 0x50, 0x4A, 0xC7, 0x8B, 0x75, 0x82, 0x82, \ + 0x28, 0x46, 0xC0, 0xBA, 0x35, 0xC3, 0x5F, 0x5C, \ + 0x59, 0x16, 0x0C, 0xC0, 0x46, 0xFD, 0x82, 0x51, \ + 0x54, 0x1F, 0xC6, 0x8C, 0x9C, 0x86, 0xB0, 0x22, \ + 0xBB, 0x70, 0x99, 0x87, 0x6A, 0x46, 0x0E, 0x74, \ + 0x51, 0xA8, 0xA9, 0x31, 0x09, 0x70, 0x3F, 0xEE, \ + 0x1C, 0x21, 0x7E, 0x6C, 0x38, 0x26, 0xE5, 0x2C, \ + 0x51, 0xAA, 0x69, 0x1E, 0x0E, 0x42, 0x3C, 0xFC, \ + 0x99, 0xE9, 0xE3, 0x16, 0x50, 0xC1, 0x21, 0x7B, \ + 0x62, 0x48, 0x16, 0xCD, 0xAD, 0x9A, 0x95, 0xF9, \ + 0xD5, 0xB8, 0x01, 0x94, 0x88, 0xD9, 0xC0, 0xA0, \ + 0xA1, 0xFE, 0x30, 0x75, 0xA5, 0x77, 0xE2, 0x31, \ + 0x83, 0xF8, 0x1D, 0x4A, 0x3F, 0x2F, 0xA4, 0x57, \ + 0x1E, 0xFC, 0x8C, 0xE0, 0xBA, 0x8A, 0x4F, 0xE8, \ + 0xB6, 0x85, 0x5D, 0xFE, 0x72, 0xB0, 0xA6, 0x6E, \ + 0xDE, 0xD2, 0xFB, 0xAB, 0xFB, 0xE5, 0x8A, 0x30, \ + 0xFA, 0xFA, 0xBE, 0x1C, 0x5D, 0x71, 0xA8, 0x7E, \ + 0x2F, 0x74, 0x1E, 0xF8, 0xC1, 0xFE, 0x86, 0xFE, \ + 0xA6, 0xBB, 0xFD, 0xE5, 0x30, 0x67, 0x7F, 0x0D, \ + 0x97, 0xD1, 0x1D, 0x49, 0xF7, 0xA8, 0x44, 0x3D, \ + 0x08, 0x22, 0xE5, 0x06, 0xA9, 0xF4, 0x61, 0x4E, \ + 0x01, 0x1E, 0x2A, 0x94, 0x83, 0x8F, 0xF8, 0x8C, \ + 0xD6, 0x8C, 0x8B, 0xB7, 0xC5, 0xC6, 0x42, 0x4C, \ + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } + +#define MBEDTLS_DHM_RFC7919_FFDHE8192_G_BIN { 0x02 } + +#endif /* dhm.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecdh.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecdh.h new file mode 100644 index 000000000..4479a1d46 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecdh.h @@ -0,0 +1,440 @@ +/** + * \file ecdh.h + * + * \brief This file contains ECDH definitions and functions. + * + * The Elliptic Curve Diffie-Hellman (ECDH) protocol is an anonymous + * key agreement protocol allowing two parties to establish a shared + * secret over an insecure channel. Each party must have an + * elliptic-curve public–private key pair. + * + * For more information, see <em>NIST SP 800-56A Rev. 2: Recommendation for + * Pair-Wise Key Establishment Schemes Using Discrete Logarithm + * Cryptography</em>. + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_ECDH_H +#define MBEDTLS_ECDH_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "ecp.h" + +/* + * Use a backward compatible ECDH context. + * + * This flag is always enabled for now and future versions might add a + * configuration option that conditionally undefines this flag. + * The configuration option in question may have a different name. + * + * Features undefining this flag, must have a warning in their description in + * config.h stating that the feature breaks backward compatibility. + */ +#define MBEDTLS_ECDH_LEGACY_CONTEXT + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Defines the source of the imported EC key. + */ +typedef enum +{ + MBEDTLS_ECDH_OURS, /**< Our key. */ + MBEDTLS_ECDH_THEIRS, /**< The key of the peer. */ +} mbedtls_ecdh_side; + +#if !defined(MBEDTLS_ECDH_LEGACY_CONTEXT) +/** + * Defines the ECDH implementation used. + * + * Later versions of the library may add new variants, therefore users should + * not make any assumptions about them. + */ +typedef enum +{ + MBEDTLS_ECDH_VARIANT_NONE = 0, /*!< Implementation not defined. */ + MBEDTLS_ECDH_VARIANT_MBEDTLS_2_0,/*!< The default Mbed TLS implementation */ +} mbedtls_ecdh_variant; + +/** + * The context used by the default ECDH implementation. + * + * Later versions might change the structure of this context, therefore users + * should not make any assumptions about the structure of + * mbedtls_ecdh_context_mbed. + */ +typedef struct mbedtls_ecdh_context_mbed +{ + mbedtls_ecp_group grp; /*!< The elliptic curve used. */ + mbedtls_mpi d; /*!< The private key. */ + mbedtls_ecp_point Q; /*!< The public key. */ + mbedtls_ecp_point Qp; /*!< The value of the public key of the peer. */ + mbedtls_mpi z; /*!< The shared secret. */ +#if defined(MBEDTLS_ECP_RESTARTABLE) + mbedtls_ecp_restart_ctx rs; /*!< The restart context for EC computations. */ +#endif +} mbedtls_ecdh_context_mbed; +#endif + +/** + * + * \warning Performing multiple operations concurrently on the same + * ECDSA context is not supported; objects of this type + * should not be shared between multiple threads. + * \brief The ECDH context structure. + */ +typedef struct mbedtls_ecdh_context +{ +#if defined(MBEDTLS_ECDH_LEGACY_CONTEXT) + mbedtls_ecp_group grp; /*!< The elliptic curve used. */ + mbedtls_mpi d; /*!< The private key. */ + mbedtls_ecp_point Q; /*!< The public key. */ + mbedtls_ecp_point Qp; /*!< The value of the public key of the peer. */ + mbedtls_mpi z; /*!< The shared secret. */ + int point_format; /*!< The format of point export in TLS messages. */ + mbedtls_ecp_point Vi; /*!< The blinding value. */ + mbedtls_ecp_point Vf; /*!< The unblinding value. */ + mbedtls_mpi _d; /*!< The previous \p d. */ +#if defined(MBEDTLS_ECP_RESTARTABLE) + int restart_enabled; /*!< The flag for restartable mode. */ + mbedtls_ecp_restart_ctx rs; /*!< The restart context for EC computations. */ +#endif /* MBEDTLS_ECP_RESTARTABLE */ +#else + uint8_t point_format; /*!< The format of point export in TLS messages + as defined in RFC 4492. */ + mbedtls_ecp_group_id grp_id;/*!< The elliptic curve used. */ + mbedtls_ecdh_variant var; /*!< The ECDH implementation/structure used. */ + union + { + mbedtls_ecdh_context_mbed mbed_ecdh; + } ctx; /*!< Implementation-specific context. The + context in use is specified by the \c var + field. */ +#if defined(MBEDTLS_ECP_RESTARTABLE) + uint8_t restart_enabled; /*!< The flag for restartable mode. Functions of + an alternative implementation not supporting + restartable mode must return + MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED error + if this flag is set. */ +#endif /* MBEDTLS_ECP_RESTARTABLE */ +#endif /* MBEDTLS_ECDH_LEGACY_CONTEXT */ +} +mbedtls_ecdh_context; + +/** + * \brief This function generates an ECDH keypair on an elliptic + * curve. + * + * This function performs the first of two core computations + * implemented during the ECDH key exchange. The second core + * computation is performed by mbedtls_ecdh_compute_shared(). + * + * \see ecp.h + * + * \param grp The ECP group to use. This must be initialized and have + * domain parameters loaded, for example through + * mbedtls_ecp_load() or mbedtls_ecp_tls_read_group(). + * \param d The destination MPI (private key). + * This must be initialized. + * \param Q The destination point (public key). + * This must be initialized. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL in case \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return Another \c MBEDTLS_ERR_ECP_XXX or + * \c MBEDTLS_MPI_XXX error code on failure. + */ +int mbedtls_ecdh_gen_public( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function computes the shared secret. + * + * This function performs the second of two core computations + * implemented during the ECDH key exchange. The first core + * computation is performed by mbedtls_ecdh_gen_public(). + * + * \see ecp.h + * + * \note If \p f_rng is not NULL, it is used to implement + * countermeasures against side-channel attacks. + * For more information, see mbedtls_ecp_mul(). + * + * \param grp The ECP group to use. This must be initialized and have + * domain parameters loaded, for example through + * mbedtls_ecp_load() or mbedtls_ecp_tls_read_group(). + * \param z The destination MPI (shared secret). + * This must be initialized. + * \param Q The public key from another party. + * This must be initialized. + * \param d Our secret exponent (private key). + * This must be initialized. + * \param f_rng The RNG function. This may be \c NULL if randomization + * of intermediate results during the ECP computations is + * not needed (discouraged). See the documentation of + * mbedtls_ecp_mul() for more. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't need a + * context argument. + * + * \return \c 0 on success. + * \return Another \c MBEDTLS_ERR_ECP_XXX or + * \c MBEDTLS_MPI_XXX error code on failure. + */ +int mbedtls_ecdh_compute_shared( mbedtls_ecp_group *grp, mbedtls_mpi *z, + const mbedtls_ecp_point *Q, const mbedtls_mpi *d, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function initializes an ECDH context. + * + * \param ctx The ECDH context to initialize. This must not be \c NULL. + */ +void mbedtls_ecdh_init( mbedtls_ecdh_context *ctx ); + +/** + * \brief This function sets up the ECDH context with the information + * given. + * + * This function should be called after mbedtls_ecdh_init() but + * before mbedtls_ecdh_make_params(). There is no need to call + * this function before mbedtls_ecdh_read_params(). + * + * This is the first function used by a TLS server for ECDHE + * ciphersuites. + * + * \param ctx The ECDH context to set up. This must be initialized. + * \param grp_id The group id of the group to set up the context for. + * + * \return \c 0 on success. + */ +int mbedtls_ecdh_setup( mbedtls_ecdh_context *ctx, + mbedtls_ecp_group_id grp_id ); + +/** + * \brief This function frees a context. + * + * \param ctx The context to free. This may be \c NULL, in which + * case this function does nothing. If it is not \c NULL, + * it must point to an initialized ECDH context. + */ +void mbedtls_ecdh_free( mbedtls_ecdh_context *ctx ); + +/** + * \brief This function generates an EC key pair and exports its + * in the format used in a TLS ServerKeyExchange handshake + * message. + * + * This is the second function used by a TLS server for ECDHE + * ciphersuites. (It is called after mbedtls_ecdh_setup().) + * + * \see ecp.h + * + * \param ctx The ECDH context to use. This must be initialized + * and bound to a group, for example via mbedtls_ecdh_setup(). + * \param olen The address at which to store the number of Bytes written. + * \param buf The destination buffer. This must be a writable buffer of + * length \p blen Bytes. + * \param blen The length of the destination buffer \p buf in Bytes. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL in case \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + * \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure. + */ +int mbedtls_ecdh_make_params( mbedtls_ecdh_context *ctx, size_t *olen, + unsigned char *buf, size_t blen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function parses the ECDHE parameters in a + * TLS ServerKeyExchange handshake message. + * + * \note In a TLS handshake, this is the how the client + * sets up its ECDHE context from the server's public + * ECDHE key material. + * + * \see ecp.h + * + * \param ctx The ECDHE context to use. This must be initialized. + * \param buf On input, \c *buf must be the start of the input buffer. + * On output, \c *buf is updated to point to the end of the + * data that has been read. On success, this is the first byte + * past the end of the ServerKeyExchange parameters. + * On error, this is the point at which an error has been + * detected, which is usually not useful except to debug + * failures. + * \param end The end of the input buffer. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX error code on failure. + * + */ +int mbedtls_ecdh_read_params( mbedtls_ecdh_context *ctx, + const unsigned char **buf, + const unsigned char *end ); + +/** + * \brief This function sets up an ECDH context from an EC key. + * + * It is used by clients and servers in place of the + * ServerKeyEchange for static ECDH, and imports ECDH + * parameters from the EC key information of a certificate. + * + * \see ecp.h + * + * \param ctx The ECDH context to set up. This must be initialized. + * \param key The EC key to use. This must be initialized. + * \param side Defines the source of the key. Possible values are: + * - #MBEDTLS_ECDH_OURS: The key is ours. + * - #MBEDTLS_ECDH_THEIRS: The key is that of the peer. + * + * \return \c 0 on success. + * \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure. + * + */ +int mbedtls_ecdh_get_params( mbedtls_ecdh_context *ctx, + const mbedtls_ecp_keypair *key, + mbedtls_ecdh_side side ); + +/** + * \brief This function generates a public key and exports it + * as a TLS ClientKeyExchange payload. + * + * This is the second function used by a TLS client for ECDH(E) + * ciphersuites. + * + * \see ecp.h + * + * \param ctx The ECDH context to use. This must be initialized + * and bound to a group, the latter usually by + * mbedtls_ecdh_read_params(). + * \param olen The address at which to store the number of Bytes written. + * This must not be \c NULL. + * \param buf The destination buffer. This must be a writable buffer + * of length \p blen Bytes. + * \param blen The size of the destination buffer \p buf in Bytes. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL in case \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + * \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure. + */ +int mbedtls_ecdh_make_public( mbedtls_ecdh_context *ctx, size_t *olen, + unsigned char *buf, size_t blen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function parses and processes the ECDHE payload of a + * TLS ClientKeyExchange message. + * + * This is the third function used by a TLS server for ECDH(E) + * ciphersuites. (It is called after mbedtls_ecdh_setup() and + * mbedtls_ecdh_make_params().) + * + * \see ecp.h + * + * \param ctx The ECDH context to use. This must be initialized + * and bound to a group, for example via mbedtls_ecdh_setup(). + * \param buf The pointer to the ClientKeyExchange payload. This must + * be a readable buffer of length \p blen Bytes. + * \param blen The length of the input buffer \p buf in Bytes. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX error code on failure. + */ +int mbedtls_ecdh_read_public( mbedtls_ecdh_context *ctx, + const unsigned char *buf, size_t blen ); + +/** + * \brief This function derives and exports the shared secret. + * + * This is the last function used by both TLS client + * and servers. + * + * \note If \p f_rng is not NULL, it is used to implement + * countermeasures against side-channel attacks. + * For more information, see mbedtls_ecp_mul(). + * + * \see ecp.h + + * \param ctx The ECDH context to use. This must be initialized + * and have its own private key generated and the peer's + * public key imported. + * \param olen The address at which to store the total number of + * Bytes written on success. This must not be \c NULL. + * \param buf The buffer to write the generated shared key to. This + * must be a writable buffer of size \p blen Bytes. + * \param blen The length of the destination buffer \p buf in Bytes. + * \param f_rng The RNG function, for blinding purposes. This may + * b \c NULL if blinding isn't needed. + * \param p_rng The RNG context. This may be \c NULL if \p f_rng + * doesn't need a context argument. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + * \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure. + */ +int mbedtls_ecdh_calc_secret( mbedtls_ecdh_context *ctx, size_t *olen, + unsigned char *buf, size_t blen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +#if defined(MBEDTLS_ECP_RESTARTABLE) +/** + * \brief This function enables restartable EC computations for this + * context. (Default: disabled.) + * + * \see \c mbedtls_ecp_set_max_ops() + * + * \note It is not possible to safely disable restartable + * computations once enabled, except by free-ing the context, + * which cancels possible in-progress operations. + * + * \param ctx The ECDH context to use. This must be initialized. + */ +void mbedtls_ecdh_enable_restart( mbedtls_ecdh_context *ctx ); +#endif /* MBEDTLS_ECP_RESTARTABLE */ + +#ifdef __cplusplus +} +#endif + +#endif /* ecdh.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecdsa.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecdsa.h new file mode 100644 index 000000000..f8b28507c --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecdsa.h @@ -0,0 +1,545 @@ +/** + * \file ecdsa.h + * + * \brief This file contains ECDSA definitions and functions. + * + * The Elliptic Curve Digital Signature Algorithm (ECDSA) is defined in + * <em>Standards for Efficient Cryptography Group (SECG): + * SEC1 Elliptic Curve Cryptography</em>. + * The use of ECDSA for TLS is defined in <em>RFC-4492: Elliptic Curve + * Cryptography (ECC) Cipher Suites for Transport Layer Security (TLS)</em>. + * + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_ECDSA_H +#define MBEDTLS_ECDSA_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "ecp.h" +#include "md.h" + +/* + * RFC-4492 page 20: + * + * Ecdsa-Sig-Value ::= SEQUENCE { + * r INTEGER, + * s INTEGER + * } + * + * Size is at most + * 1 (tag) + 1 (len) + 1 (initial 0) + ECP_MAX_BYTES for each of r and s, + * twice that + 1 (tag) + 2 (len) for the sequence + * (assuming ECP_MAX_BYTES is less than 126 for r and s, + * and less than 124 (total len <= 255) for the sequence) + */ +#if MBEDTLS_ECP_MAX_BYTES > 124 +#error "MBEDTLS_ECP_MAX_BYTES bigger than expected, please fix MBEDTLS_ECDSA_MAX_LEN" +#endif +/** The maximal size of an ECDSA signature in Bytes. */ +#define MBEDTLS_ECDSA_MAX_LEN ( 3 + 2 * ( 3 + MBEDTLS_ECP_MAX_BYTES ) ) + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The ECDSA context structure. + * + * \warning Performing multiple operations concurrently on the same + * ECDSA context is not supported; objects of this type + * should not be shared between multiple threads. + */ +typedef mbedtls_ecp_keypair mbedtls_ecdsa_context; + +#if defined(MBEDTLS_ECP_RESTARTABLE) + +/** + * \brief Internal restart context for ecdsa_verify() + * + * \note Opaque struct, defined in ecdsa.c + */ +typedef struct mbedtls_ecdsa_restart_ver mbedtls_ecdsa_restart_ver_ctx; + +/** + * \brief Internal restart context for ecdsa_sign() + * + * \note Opaque struct, defined in ecdsa.c + */ +typedef struct mbedtls_ecdsa_restart_sig mbedtls_ecdsa_restart_sig_ctx; + +#if defined(MBEDTLS_ECDSA_DETERMINISTIC) +/** + * \brief Internal restart context for ecdsa_sign_det() + * + * \note Opaque struct, defined in ecdsa.c + */ +typedef struct mbedtls_ecdsa_restart_det mbedtls_ecdsa_restart_det_ctx; +#endif + +/** + * \brief General context for resuming ECDSA operations + */ +typedef struct +{ + mbedtls_ecp_restart_ctx ecp; /*!< base context for ECP restart and + shared administrative info */ + mbedtls_ecdsa_restart_ver_ctx *ver; /*!< ecdsa_verify() sub-context */ + mbedtls_ecdsa_restart_sig_ctx *sig; /*!< ecdsa_sign() sub-context */ +#if defined(MBEDTLS_ECDSA_DETERMINISTIC) + mbedtls_ecdsa_restart_det_ctx *det; /*!< ecdsa_sign_det() sub-context */ +#endif +} mbedtls_ecdsa_restart_ctx; + +#else /* MBEDTLS_ECP_RESTARTABLE */ + +/* Now we can declare functions that take a pointer to that */ +typedef void mbedtls_ecdsa_restart_ctx; + +#endif /* MBEDTLS_ECP_RESTARTABLE */ + +/** + * \brief This function computes the ECDSA signature of a + * previously-hashed message. + * + * \note The deterministic version implemented in + * mbedtls_ecdsa_sign_det() is usually preferred. + * + * \note If the bitlength of the message hash is larger than the + * bitlength of the group order, then the hash is truncated + * as defined in <em>Standards for Efficient Cryptography Group + * (SECG): SEC1 Elliptic Curve Cryptography</em>, section + * 4.1.3, step 5. + * + * \see ecp.h + * + * \param grp The context for the elliptic curve to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param r The MPI context in which to store the first part + * the signature. This must be initialized. + * \param s The MPI context in which to store the second part + * the signature. This must be initialized. + * \param d The private signing key. This must be initialized. + * \param buf The content to be signed. This is usually the hash of + * the original data to be signed. This must be a readable + * buffer of length \p blen Bytes. It may be \c NULL if + * \p blen is zero. + * \param blen The length of \p buf in Bytes. + * \param f_rng The RNG function. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng doesn't need a context parameter. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX + * or \c MBEDTLS_MPI_XXX error code on failure. + */ +int mbedtls_ecdsa_sign( mbedtls_ecp_group *grp, mbedtls_mpi *r, mbedtls_mpi *s, + const mbedtls_mpi *d, const unsigned char *buf, size_t blen, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); + +#if defined(MBEDTLS_ECDSA_DETERMINISTIC) +/** + * \brief This function computes the ECDSA signature of a + * previously-hashed message, deterministic version. + * + * For more information, see <em>RFC-6979: Deterministic + * Usage of the Digital Signature Algorithm (DSA) and Elliptic + * Curve Digital Signature Algorithm (ECDSA)</em>. + * + * \note If the bitlength of the message hash is larger than the + * bitlength of the group order, then the hash is truncated as + * defined in <em>Standards for Efficient Cryptography Group + * (SECG): SEC1 Elliptic Curve Cryptography</em>, section + * 4.1.3, step 5. + * + * \see ecp.h + * + * \param grp The context for the elliptic curve to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param r The MPI context in which to store the first part + * the signature. This must be initialized. + * \param s The MPI context in which to store the second part + * the signature. This must be initialized. + * \param d The private signing key. This must be initialized + * and setup, for example through mbedtls_ecp_gen_privkey(). + * \param buf The hashed content to be signed. This must be a readable + * buffer of length \p blen Bytes. It may be \c NULL if + * \p blen is zero. + * \param blen The length of \p buf in Bytes. + * \param md_alg The hash algorithm used to hash the original data. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX + * error code on failure. + */ +int mbedtls_ecdsa_sign_det( mbedtls_ecp_group *grp, mbedtls_mpi *r, + mbedtls_mpi *s, const mbedtls_mpi *d, + const unsigned char *buf, size_t blen, + mbedtls_md_type_t md_alg ); +#endif /* MBEDTLS_ECDSA_DETERMINISTIC */ + +/** + * \brief This function verifies the ECDSA signature of a + * previously-hashed message. + * + * \note If the bitlength of the message hash is larger than the + * bitlength of the group order, then the hash is truncated as + * defined in <em>Standards for Efficient Cryptography Group + * (SECG): SEC1 Elliptic Curve Cryptography</em>, section + * 4.1.4, step 3. + * + * \see ecp.h + * + * \param grp The ECP group to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param buf The hashed content that was signed. This must be a readable + * buffer of length \p blen Bytes. It may be \c NULL if + * \p blen is zero. + * \param blen The length of \p buf in Bytes. + * \param Q The public key to use for verification. This must be + * initialized and setup. + * \param r The first integer of the signature. + * This must be initialized. + * \param s The second integer of the signature. + * This must be initialized. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the signature + * is invalid. + * \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX + * error code on failure for any other reason. + */ +int mbedtls_ecdsa_verify( mbedtls_ecp_group *grp, + const unsigned char *buf, size_t blen, + const mbedtls_ecp_point *Q, const mbedtls_mpi *r, + const mbedtls_mpi *s); + +/** + * \brief This function computes the ECDSA signature and writes it + * to a buffer, serialized as defined in <em>RFC-4492: + * Elliptic Curve Cryptography (ECC) Cipher Suites for + * Transport Layer Security (TLS)</em>. + * + * \warning It is not thread-safe to use the same context in + * multiple threads. + * + * \note The deterministic version is used if + * #MBEDTLS_ECDSA_DETERMINISTIC is defined. For more + * information, see <em>RFC-6979: Deterministic Usage + * of the Digital Signature Algorithm (DSA) and Elliptic + * Curve Digital Signature Algorithm (ECDSA)</em>. + * + * \note If the bitlength of the message hash is larger than the + * bitlength of the group order, then the hash is truncated as + * defined in <em>Standards for Efficient Cryptography Group + * (SECG): SEC1 Elliptic Curve Cryptography</em>, section + * 4.1.3, step 5. + * + * \see ecp.h + * + * \param ctx The ECDSA context to use. This must be initialized + * and have a group and private key bound to it, for example + * via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair(). + * \param md_alg The message digest that was used to hash the message. + * \param hash The message hash to be signed. This must be a readable + * buffer of length \p blen Bytes. + * \param hlen The length of the hash \p hash in Bytes. + * \param sig The buffer to which to write the signature. This must be a + * writable buffer of length at least twice as large as the + * size of the curve used, plus 9. For example, 73 Bytes if + * a 256-bit curve is used. A buffer length of + * #MBEDTLS_ECDSA_MAX_LEN is always safe. + * \param slen The address at which to store the actual length of + * the signature written. Must not be \c NULL. + * \param f_rng The RNG function. This must not be \c NULL if + * #MBEDTLS_ECDSA_DETERMINISTIC is unset. Otherwise, + * it is unused and may be set to \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't use a context. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or + * \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_ecdsa_write_signature( mbedtls_ecdsa_context *ctx, + mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hlen, + unsigned char *sig, size_t *slen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function computes the ECDSA signature and writes it + * to a buffer, in a restartable way. + * + * \see \c mbedtls_ecdsa_write_signature() + * + * \note This function is like \c mbedtls_ecdsa_write_signature() + * but it can return early and restart according to the limit + * set with \c mbedtls_ecp_set_max_ops() to reduce blocking. + * + * \param ctx The ECDSA context to use. This must be initialized + * and have a group and private key bound to it, for example + * via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair(). + * \param md_alg The message digest that was used to hash the message. + * \param hash The message hash to be signed. This must be a readable + * buffer of length \p blen Bytes. + * \param hlen The length of the hash \p hash in Bytes. + * \param sig The buffer to which to write the signature. This must be a + * writable buffer of length at least twice as large as the + * size of the curve used, plus 9. For example, 73 Bytes if + * a 256-bit curve is used. A buffer length of + * #MBEDTLS_ECDSA_MAX_LEN is always safe. + * \param slen The address at which to store the actual length of + * the signature written. Must not be \c NULL. + * \param f_rng The RNG function. This must not be \c NULL if + * #MBEDTLS_ECDSA_DETERMINISTIC is unset. Otherwise, + * it is unused and may be set to \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't use a context. + * \param rs_ctx The restart context to use. This may be \c NULL to disable + * restarting. If it is not \c NULL, it must point to an + * initialized restart context. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + * \return Another \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or + * \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_ecdsa_write_signature_restartable( mbedtls_ecdsa_context *ctx, + mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hlen, + unsigned char *sig, size_t *slen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + mbedtls_ecdsa_restart_ctx *rs_ctx ); + +#if defined(MBEDTLS_ECDSA_DETERMINISTIC) +#if ! defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief This function computes an ECDSA signature and writes + * it to a buffer, serialized as defined in <em>RFC-4492: + * Elliptic Curve Cryptography (ECC) Cipher Suites for + * Transport Layer Security (TLS)</em>. + * + * The deterministic version is defined in <em>RFC-6979: + * Deterministic Usage of the Digital Signature Algorithm (DSA) + * and Elliptic Curve Digital Signature Algorithm (ECDSA)</em>. + * + * \warning It is not thread-safe to use the same context in + * multiple threads. + * + * \note If the bitlength of the message hash is larger than the + * bitlength of the group order, then the hash is truncated as + * defined in <em>Standards for Efficient Cryptography Group + * (SECG): SEC1 Elliptic Curve Cryptography</em>, section + * 4.1.3, step 5. + * + * \see ecp.h + * + * \deprecated Superseded by mbedtls_ecdsa_write_signature() in + * Mbed TLS version 2.0 and later. + * + * \param ctx The ECDSA context to use. This must be initialized + * and have a group and private key bound to it, for example + * via mbedtls_ecdsa_genkey() or mbedtls_ecdsa_from_keypair(). + * \param hash The message hash to be signed. This must be a readable + * buffer of length \p blen Bytes. + * \param hlen The length of the hash \p hash in Bytes. + * \param sig The buffer to which to write the signature. This must be a + * writable buffer of length at least twice as large as the + * size of the curve used, plus 9. For example, 73 Bytes if + * a 256-bit curve is used. A buffer length of + * #MBEDTLS_ECDSA_MAX_LEN is always safe. + * \param slen The address at which to store the actual length of + * the signature written. Must not be \c NULL. + * \param md_alg The message digest that was used to hash the message. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX, \c MBEDTLS_ERR_MPI_XXX or + * \c MBEDTLS_ERR_ASN1_XXX error code on failure. + */ +int mbedtls_ecdsa_write_signature_det( mbedtls_ecdsa_context *ctx, + const unsigned char *hash, size_t hlen, + unsigned char *sig, size_t *slen, + mbedtls_md_type_t md_alg ) MBEDTLS_DEPRECATED; +#undef MBEDTLS_DEPRECATED +#endif /* MBEDTLS_DEPRECATED_REMOVED */ +#endif /* MBEDTLS_ECDSA_DETERMINISTIC */ + +/** + * \brief This function reads and verifies an ECDSA signature. + * + * \note If the bitlength of the message hash is larger than the + * bitlength of the group order, then the hash is truncated as + * defined in <em>Standards for Efficient Cryptography Group + * (SECG): SEC1 Elliptic Curve Cryptography</em>, section + * 4.1.4, step 3. + * + * \see ecp.h + * + * \param ctx The ECDSA context to use. This must be initialized + * and have a group and public key bound to it. + * \param hash The message hash that was signed. This must be a readable + * buffer of length \p size Bytes. + * \param hlen The size of the hash \p hash. + * \param sig The signature to read and verify. This must be a readable + * buffer of length \p slen Bytes. + * \param slen The size of \p sig in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid. + * \return #MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH if there is a valid + * signature in \p sig, but its length is less than \p siglen. + * \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_ERR_MPI_XXX + * error code on failure for any other reason. + */ +int mbedtls_ecdsa_read_signature( mbedtls_ecdsa_context *ctx, + const unsigned char *hash, size_t hlen, + const unsigned char *sig, size_t slen ); + +/** + * \brief This function reads and verifies an ECDSA signature, + * in a restartable way. + * + * \see \c mbedtls_ecdsa_read_signature() + * + * \note This function is like \c mbedtls_ecdsa_read_signature() + * but it can return early and restart according to the limit + * set with \c mbedtls_ecp_set_max_ops() to reduce blocking. + * + * \param ctx The ECDSA context to use. This must be initialized + * and have a group and public key bound to it. + * \param hash The message hash that was signed. This must be a readable + * buffer of length \p size Bytes. + * \param hlen The size of the hash \p hash. + * \param sig The signature to read and verify. This must be a readable + * buffer of length \p slen Bytes. + * \param slen The size of \p sig in Bytes. + * \param rs_ctx The restart context to use. This may be \c NULL to disable + * restarting. If it is not \c NULL, it must point to an + * initialized restart context. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if signature is invalid. + * \return #MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH if there is a valid + * signature in \p sig, but its length is less than \p siglen. + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + * \return Another \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_ERR_MPI_XXX + * error code on failure for any other reason. + */ +int mbedtls_ecdsa_read_signature_restartable( mbedtls_ecdsa_context *ctx, + const unsigned char *hash, size_t hlen, + const unsigned char *sig, size_t slen, + mbedtls_ecdsa_restart_ctx *rs_ctx ); + +/** + * \brief This function generates an ECDSA keypair on the given curve. + * + * \see ecp.h + * + * \param ctx The ECDSA context to store the keypair in. + * This must be initialized. + * \param gid The elliptic curve to use. One of the various + * \c MBEDTLS_ECP_DP_XXX macros depending on configuration. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX code on failure. + */ +int mbedtls_ecdsa_genkey( mbedtls_ecdsa_context *ctx, mbedtls_ecp_group_id gid, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); + +/** + * \brief This function sets up an ECDSA context from an EC key pair. + * + * \see ecp.h + * + * \param ctx The ECDSA context to setup. This must be initialized. + * \param key The EC key to use. This must be initialized and hold + * a private-public key pair or a public key. In the former + * case, the ECDSA context may be used for signature creation + * and verification after this call. In the latter case, it + * may be used for signature verification. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX code on failure. + */ +int mbedtls_ecdsa_from_keypair( mbedtls_ecdsa_context *ctx, + const mbedtls_ecp_keypair *key ); + +/** + * \brief This function initializes an ECDSA context. + * + * \param ctx The ECDSA context to initialize. + * This must not be \c NULL. + */ +void mbedtls_ecdsa_init( mbedtls_ecdsa_context *ctx ); + +/** + * \brief This function frees an ECDSA context. + * + * \param ctx The ECDSA context to free. This may be \c NULL, + * in which case this function does nothing. If it + * is not \c NULL, it must be initialized. + */ +void mbedtls_ecdsa_free( mbedtls_ecdsa_context *ctx ); + +#if defined(MBEDTLS_ECP_RESTARTABLE) +/** + * \brief Initialize a restart context. + * + * \param ctx The restart context to initialize. + * This must not be \c NULL. + */ +void mbedtls_ecdsa_restart_init( mbedtls_ecdsa_restart_ctx *ctx ); + +/** + * \brief Free the components of a restart context. + * + * \param ctx The restart context to free. This may be \c NULL, + * in which case this function does nothing. If it + * is not \c NULL, it must be initialized. + */ +void mbedtls_ecdsa_restart_free( mbedtls_ecdsa_restart_ctx *ctx ); +#endif /* MBEDTLS_ECP_RESTARTABLE */ + +#ifdef __cplusplus +} +#endif + +#endif /* ecdsa.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecjpake.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecjpake.h new file mode 100644 index 000000000..3d8d02ae6 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecjpake.h @@ -0,0 +1,277 @@ +/** + * \file ecjpake.h + * + * \brief Elliptic curve J-PAKE + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_ECJPAKE_H +#define MBEDTLS_ECJPAKE_H + +/* + * J-PAKE is a password-authenticated key exchange that allows deriving a + * strong shared secret from a (potentially low entropy) pre-shared + * passphrase, with forward secrecy and mutual authentication. + * https://en.wikipedia.org/wiki/Password_Authenticated_Key_Exchange_by_Juggling + * + * This file implements the Elliptic Curve variant of J-PAKE, + * as defined in Chapter 7.4 of the Thread v1.0 Specification, + * available to members of the Thread Group http://threadgroup.org/ + * + * As the J-PAKE algorithm is inherently symmetric, so is our API. + * Each party needs to send its first round message, in any order, to the + * other party, then each sends its second round message, in any order. + * The payloads are serialized in a way suitable for use in TLS, but could + * also be use outside TLS. + */ +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "ecp.h" +#include "md.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Roles in the EC J-PAKE exchange + */ +typedef enum { + MBEDTLS_ECJPAKE_CLIENT = 0, /**< Client */ + MBEDTLS_ECJPAKE_SERVER, /**< Server */ +} mbedtls_ecjpake_role; + +#if !defined(MBEDTLS_ECJPAKE_ALT) +/** + * EC J-PAKE context structure. + * + * J-PAKE is a symmetric protocol, except for the identifiers used in + * Zero-Knowledge Proofs, and the serialization of the second message + * (KeyExchange) as defined by the Thread spec. + * + * In order to benefit from this symmetry, we choose a different naming + * convetion from the Thread v1.0 spec. Correspondance is indicated in the + * description as a pair C: client name, S: server name + */ +typedef struct mbedtls_ecjpake_context +{ + const mbedtls_md_info_t *md_info; /**< Hash to use */ + mbedtls_ecp_group grp; /**< Elliptic curve */ + mbedtls_ecjpake_role role; /**< Are we client or server? */ + int point_format; /**< Format for point export */ + + mbedtls_ecp_point Xm1; /**< My public key 1 C: X1, S: X3 */ + mbedtls_ecp_point Xm2; /**< My public key 2 C: X2, S: X4 */ + mbedtls_ecp_point Xp1; /**< Peer public key 1 C: X3, S: X1 */ + mbedtls_ecp_point Xp2; /**< Peer public key 2 C: X4, S: X2 */ + mbedtls_ecp_point Xp; /**< Peer public key C: Xs, S: Xc */ + + mbedtls_mpi xm1; /**< My private key 1 C: x1, S: x3 */ + mbedtls_mpi xm2; /**< My private key 2 C: x2, S: x4 */ + + mbedtls_mpi s; /**< Pre-shared secret (passphrase) */ +} mbedtls_ecjpake_context; + +#else /* MBEDTLS_ECJPAKE_ALT */ +#include "ecjpake_alt.h" +#endif /* MBEDTLS_ECJPAKE_ALT */ + +/** + * \brief Initialize an ECJPAKE context. + * + * \param ctx The ECJPAKE context to initialize. + * This must not be \c NULL. + */ +void mbedtls_ecjpake_init( mbedtls_ecjpake_context *ctx ); + +/** + * \brief Set up an ECJPAKE context for use. + * + * \note Currently the only values for hash/curve allowed by the + * standard are #MBEDTLS_MD_SHA256/#MBEDTLS_ECP_DP_SECP256R1. + * + * \param ctx The ECJPAKE context to set up. This must be initialized. + * \param role The role of the caller. This must be either + * #MBEDTLS_ECJPAKE_CLIENT or #MBEDTLS_ECJPAKE_SERVER. + * \param hash The identifier of the hash function to use, + * for example #MBEDTLS_MD_SHA256. + * \param curve The identifier of the elliptic curve to use, + * for example #MBEDTLS_ECP_DP_SECP256R1. + * \param secret The pre-shared secret (passphrase). This must be + * a readable buffer of length \p len Bytes. It need + * only be valid for the duration of this call. + * \param len The length of the pre-shared secret \p secret. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_ecjpake_setup( mbedtls_ecjpake_context *ctx, + mbedtls_ecjpake_role role, + mbedtls_md_type_t hash, + mbedtls_ecp_group_id curve, + const unsigned char *secret, + size_t len ); + +/** + * \brief Check if an ECJPAKE context is ready for use. + * + * \param ctx The ECJPAKE context to check. This must be + * initialized. + * + * \return \c 0 if the context is ready for use. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise. + */ +int mbedtls_ecjpake_check( const mbedtls_ecjpake_context *ctx ); + +/** + * \brief Generate and write the first round message + * (TLS: contents of the Client/ServerHello extension, + * excluding extension type and length bytes). + * + * \param ctx The ECJPAKE context to use. This must be + * initialized and set up. + * \param buf The buffer to write the contents to. This must be a + * writable buffer of length \p len Bytes. + * \param len The length of \p buf in Bytes. + * \param olen The address at which to store the total number + * of Bytes written to \p buf. This must not be \c NULL. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG parameter to be passed to \p f_rng. This + * may be \c NULL if \p f_rng doesn't use a context. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_ecjpake_write_round_one( mbedtls_ecjpake_context *ctx, + unsigned char *buf, size_t len, size_t *olen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Read and process the first round message + * (TLS: contents of the Client/ServerHello extension, + * excluding extension type and length bytes). + * + * \param ctx The ECJPAKE context to use. This must be initialized + * and set up. + * \param buf The buffer holding the first round message. This must + * be a readable buffer of length \p len Bytes. + * \param len The length in Bytes of \p buf. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_ecjpake_read_round_one( mbedtls_ecjpake_context *ctx, + const unsigned char *buf, + size_t len ); + +/** + * \brief Generate and write the second round message + * (TLS: contents of the Client/ServerKeyExchange). + * + * \param ctx The ECJPAKE context to use. This must be initialized, + * set up, and already have performed round one. + * \param buf The buffer to write the round two contents to. + * This must be a writable buffer of length \p len Bytes. + * \param len The size of \p buf in Bytes. + * \param olen The address at which to store the total number of Bytes + * written to \p buf. This must not be \c NULL. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG parameter to be passed to \p f_rng. This + * may be \c NULL if \p f_rng doesn't use a context. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_ecjpake_write_round_two( mbedtls_ecjpake_context *ctx, + unsigned char *buf, size_t len, size_t *olen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Read and process the second round message + * (TLS: contents of the Client/ServerKeyExchange). + * + * \param ctx The ECJPAKE context to use. This must be initialized + * and set up and already have performed round one. + * \param buf The buffer holding the second round message. This must + * be a readable buffer of length \p len Bytes. + * \param len The length in Bytes of \p buf. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_ecjpake_read_round_two( mbedtls_ecjpake_context *ctx, + const unsigned char *buf, + size_t len ); + +/** + * \brief Derive the shared secret + * (TLS: Pre-Master Secret). + * + * \param ctx The ECJPAKE context to use. This must be initialized, + * set up and have performed both round one and two. + * \param buf The buffer to write the derived secret to. This must + * be a writable buffer of length \p len Bytes. + * \param len The length of \p buf in Bytes. + * \param olen The address at which to store the total number of Bytes + * written to \p buf. This must not be \c NULL. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG parameter to be passed to \p f_rng. This + * may be \c NULL if \p f_rng doesn't use a context. + * + * \return \c 0 if successful. + * \return A negative error code on failure. + */ +int mbedtls_ecjpake_derive_secret( mbedtls_ecjpake_context *ctx, + unsigned char *buf, size_t len, size_t *olen, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This clears an ECJPAKE context and frees any + * embedded data structure. + * + * \param ctx The ECJPAKE context to free. This may be \c NULL, + * in which case this function does nothing. If it is not + * \c NULL, it must point to an initialized ECJPAKE context. + */ +void mbedtls_ecjpake_free( mbedtls_ecjpake_context *ctx ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if a test failed + */ +int mbedtls_ecjpake_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + + +#endif /* ecjpake.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecp.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecp.h new file mode 100644 index 000000000..065a4cc0b --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecp.h @@ -0,0 +1,1132 @@ +/** + * \file ecp.h + * + * \brief This file provides an API for Elliptic Curves over GF(P) (ECP). + * + * The use of ECP in cryptography and TLS is defined in + * <em>Standards for Efficient Cryptography Group (SECG): SEC1 + * Elliptic Curve Cryptography</em> and + * <em>RFC-4492: Elliptic Curve Cryptography (ECC) Cipher Suites + * for Transport Layer Security (TLS)</em>. + * + * <em>RFC-2409: The Internet Key Exchange (IKE)</em> defines ECP + * group types. + * + */ + +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_ECP_H +#define MBEDTLS_ECP_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "bignum.h" + +/* + * ECP error codes + */ +#define MBEDTLS_ERR_ECP_BAD_INPUT_DATA -0x4F80 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL -0x4F00 /**< The buffer is too small to write to. */ +#define MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE -0x4E80 /**< The requested feature is not available, for example, the requested curve is not supported. */ +#define MBEDTLS_ERR_ECP_VERIFY_FAILED -0x4E00 /**< The signature is not valid. */ +#define MBEDTLS_ERR_ECP_ALLOC_FAILED -0x4D80 /**< Memory allocation failed. */ +#define MBEDTLS_ERR_ECP_RANDOM_FAILED -0x4D00 /**< Generation of random value, such as ephemeral key, failed. */ +#define MBEDTLS_ERR_ECP_INVALID_KEY -0x4C80 /**< Invalid private or public key. */ +#define MBEDTLS_ERR_ECP_SIG_LEN_MISMATCH -0x4C00 /**< The buffer contains a valid signature followed by more data. */ + +/* MBEDTLS_ERR_ECP_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_ECP_HW_ACCEL_FAILED -0x4B80 /**< The ECP hardware accelerator failed. */ + +#define MBEDTLS_ERR_ECP_IN_PROGRESS -0x4B00 /**< Operation in progress, call again with the same parameters to continue. */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Domain-parameter identifiers: curve, subgroup, and generator. + * + * \note Only curves over prime fields are supported. + * + * \warning This library does not support validation of arbitrary domain + * parameters. Therefore, only standardized domain parameters from trusted + * sources should be used. See mbedtls_ecp_group_load(). + */ +typedef enum +{ + MBEDTLS_ECP_DP_NONE = 0, /*!< Curve not defined. */ + MBEDTLS_ECP_DP_SECP192R1, /*!< Domain parameters for the 192-bit curve defined by FIPS 186-4 and SEC1. */ + MBEDTLS_ECP_DP_SECP224R1, /*!< Domain parameters for the 224-bit curve defined by FIPS 186-4 and SEC1. */ + MBEDTLS_ECP_DP_SECP256R1, /*!< Domain parameters for the 256-bit curve defined by FIPS 186-4 and SEC1. */ + MBEDTLS_ECP_DP_SECP384R1, /*!< Domain parameters for the 384-bit curve defined by FIPS 186-4 and SEC1. */ + MBEDTLS_ECP_DP_SECP521R1, /*!< Domain parameters for the 521-bit curve defined by FIPS 186-4 and SEC1. */ + MBEDTLS_ECP_DP_BP256R1, /*!< Domain parameters for 256-bit Brainpool curve. */ + MBEDTLS_ECP_DP_BP384R1, /*!< Domain parameters for 384-bit Brainpool curve. */ + MBEDTLS_ECP_DP_BP512R1, /*!< Domain parameters for 512-bit Brainpool curve. */ + MBEDTLS_ECP_DP_CURVE25519, /*!< Domain parameters for Curve25519. */ + MBEDTLS_ECP_DP_SECP192K1, /*!< Domain parameters for 192-bit "Koblitz" curve. */ + MBEDTLS_ECP_DP_SECP224K1, /*!< Domain parameters for 224-bit "Koblitz" curve. */ + MBEDTLS_ECP_DP_SECP256K1, /*!< Domain parameters for 256-bit "Koblitz" curve. */ + MBEDTLS_ECP_DP_CURVE448, /*!< Domain parameters for Curve448. */ +} mbedtls_ecp_group_id; + +/** + * The number of supported curves, plus one for #MBEDTLS_ECP_DP_NONE. + * + * \note Montgomery curves are currently excluded. + */ +#define MBEDTLS_ECP_DP_MAX 12 + +/** + * Curve information, for use by other modules. + */ +typedef struct mbedtls_ecp_curve_info +{ + mbedtls_ecp_group_id grp_id; /*!< An internal identifier. */ + uint16_t tls_id; /*!< The TLS NamedCurve identifier. */ + uint16_t bit_size; /*!< The curve size in bits. */ + const char *name; /*!< A human-friendly name. */ +} mbedtls_ecp_curve_info; + +/** + * \brief The ECP point structure, in Jacobian coordinates. + * + * \note All functions expect and return points satisfying + * the following condition: <code>Z == 0</code> or + * <code>Z == 1</code>. Other values of \p Z are + * used only by internal functions. + * The point is zero, or "at infinity", if <code>Z == 0</code>. + * Otherwise, \p X and \p Y are its standard (affine) + * coordinates. + */ +typedef struct mbedtls_ecp_point +{ + mbedtls_mpi X; /*!< The X coordinate of the ECP point. */ + mbedtls_mpi Y; /*!< The Y coordinate of the ECP point. */ + mbedtls_mpi Z; /*!< The Z coordinate of the ECP point. */ +} +mbedtls_ecp_point; + +#if !defined(MBEDTLS_ECP_ALT) +/* + * default mbed TLS elliptic curve arithmetic implementation + * + * (in case MBEDTLS_ECP_ALT is defined then the developer has to provide an + * alternative implementation for the whole module and it will replace this + * one.) + */ + +/** + * \brief The ECP group structure. + * + * We consider two types of curve equations: + * <ul><li>Short Weierstrass: <code>y^2 = x^3 + A x + B mod P</code> + * (SEC1 + RFC-4492)</li> + * <li>Montgomery: <code>y^2 = x^3 + A x^2 + x mod P</code> (Curve25519, + * Curve448)</li></ul> + * In both cases, the generator (\p G) for a prime-order subgroup is fixed. + * + * For Short Weierstrass, this subgroup is the whole curve, and its + * cardinality is denoted by \p N. Our code requires that \p N is an + * odd prime as mbedtls_ecp_mul() requires an odd number, and + * mbedtls_ecdsa_sign() requires that it is prime for blinding purposes. + * + * For Montgomery curves, we do not store \p A, but <code>(A + 2) / 4</code>, + * which is the quantity used in the formulas. Additionally, \p nbits is + * not the size of \p N but the required size for private keys. + * + * If \p modp is NULL, reduction modulo \p P is done using a generic algorithm. + * Otherwise, \p modp must point to a function that takes an \p mbedtls_mpi in the + * range of <code>0..2^(2*pbits)-1</code>, and transforms it in-place to an integer + * which is congruent mod \p P to the given MPI, and is close enough to \p pbits + * in size, so that it may be efficiently brought in the 0..P-1 range by a few + * additions or subtractions. Therefore, it is only an approximative modular + * reduction. It must return 0 on success and non-zero on failure. + * + * \note Alternative implementations must keep the group IDs distinct. If + * two group structures have the same ID, then they must be + * identical. + * + */ +typedef struct mbedtls_ecp_group +{ + mbedtls_ecp_group_id id; /*!< An internal group identifier. */ + mbedtls_mpi P; /*!< The prime modulus of the base field. */ + mbedtls_mpi A; /*!< For Short Weierstrass: \p A in the equation. For + Montgomery curves: <code>(A + 2) / 4</code>. */ + mbedtls_mpi B; /*!< For Short Weierstrass: \p B in the equation. + For Montgomery curves: unused. */ + mbedtls_ecp_point G; /*!< The generator of the subgroup used. */ + mbedtls_mpi N; /*!< The order of \p G. */ + size_t pbits; /*!< The number of bits in \p P.*/ + size_t nbits; /*!< For Short Weierstrass: The number of bits in \p P. + For Montgomery curves: the number of bits in the + private keys. */ + unsigned int h; /*!< \internal 1 if the constants are static. */ + int (*modp)(mbedtls_mpi *); /*!< The function for fast pseudo-reduction + mod \p P (see above).*/ + int (*t_pre)(mbedtls_ecp_point *, void *); /*!< Unused. */ + int (*t_post)(mbedtls_ecp_point *, void *); /*!< Unused. */ + void *t_data; /*!< Unused. */ + mbedtls_ecp_point *T; /*!< Pre-computed points for ecp_mul_comb(). */ + size_t T_size; /*!< The number of pre-computed points. */ +} +mbedtls_ecp_group; + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h, or define them using the compiler command line. + * \{ + */ + +#if !defined(MBEDTLS_ECP_MAX_BITS) +/** + * The maximum size of the groups, that is, of \c N and \c P. + */ +#define MBEDTLS_ECP_MAX_BITS 521 /**< The maximum size of groups, in bits. */ +#endif + +#define MBEDTLS_ECP_MAX_BYTES ( ( MBEDTLS_ECP_MAX_BITS + 7 ) / 8 ) +#define MBEDTLS_ECP_MAX_PT_LEN ( 2 * MBEDTLS_ECP_MAX_BYTES + 1 ) + +#if !defined(MBEDTLS_ECP_WINDOW_SIZE) +/* + * Maximum "window" size used for point multiplication. + * Default: 6. + * Minimum value: 2. Maximum value: 7. + * + * Result is an array of at most ( 1 << ( MBEDTLS_ECP_WINDOW_SIZE - 1 ) ) + * points used for point multiplication. This value is directly tied to EC + * peak memory usage, so decreasing it by one should roughly cut memory usage + * by two (if large curves are in use). + * + * Reduction in size may reduce speed, but larger curves are impacted first. + * Sample performances (in ECDHE handshakes/s, with FIXED_POINT_OPTIM = 1): + * w-size: 6 5 4 3 2 + * 521 145 141 135 120 97 + * 384 214 209 198 177 146 + * 256 320 320 303 262 226 + * 224 475 475 453 398 342 + * 192 640 640 633 587 476 + */ +#define MBEDTLS_ECP_WINDOW_SIZE 6 /**< The maximum window size used. */ +#endif /* MBEDTLS_ECP_WINDOW_SIZE */ + +#if !defined(MBEDTLS_ECP_FIXED_POINT_OPTIM) +/* + * Trade memory for speed on fixed-point multiplication. + * + * This speeds up repeated multiplication of the generator (that is, the + * multiplication in ECDSA signatures, and half of the multiplications in + * ECDSA verification and ECDHE) by a factor roughly 3 to 4. + * + * The cost is increasing EC peak memory usage by a factor roughly 2. + * + * Change this value to 0 to reduce peak memory usage. + */ +#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up. */ +#endif /* MBEDTLS_ECP_FIXED_POINT_OPTIM */ + +/* \} name SECTION: Module settings */ + +#else /* MBEDTLS_ECP_ALT */ +#include "ecp_alt.h" +#endif /* MBEDTLS_ECP_ALT */ + +#if defined(MBEDTLS_ECP_RESTARTABLE) + +/** + * \brief Internal restart context for multiplication + * + * \note Opaque struct + */ +typedef struct mbedtls_ecp_restart_mul mbedtls_ecp_restart_mul_ctx; + +/** + * \brief Internal restart context for ecp_muladd() + * + * \note Opaque struct + */ +typedef struct mbedtls_ecp_restart_muladd mbedtls_ecp_restart_muladd_ctx; + +/** + * \brief General context for resuming ECC operations + */ +typedef struct +{ + unsigned ops_done; /*!< current ops count */ + unsigned depth; /*!< call depth (0 = top-level) */ + mbedtls_ecp_restart_mul_ctx *rsm; /*!< ecp_mul_comb() sub-context */ + mbedtls_ecp_restart_muladd_ctx *ma; /*!< ecp_muladd() sub-context */ +} mbedtls_ecp_restart_ctx; + +/* + * Operation counts for restartable functions + */ +#define MBEDTLS_ECP_OPS_CHK 3 /*!< basic ops count for ecp_check_pubkey() */ +#define MBEDTLS_ECP_OPS_DBL 8 /*!< basic ops count for ecp_double_jac() */ +#define MBEDTLS_ECP_OPS_ADD 11 /*!< basic ops count for see ecp_add_mixed() */ +#define MBEDTLS_ECP_OPS_INV 120 /*!< empirical equivalent for mpi_mod_inv() */ + +/** + * \brief Internal; for restartable functions in other modules. + * Check and update basic ops budget. + * + * \param grp Group structure + * \param rs_ctx Restart context + * \param ops Number of basic ops to do + * + * \return \c 0 if doing \p ops basic ops is still allowed, + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS otherwise. + */ +int mbedtls_ecp_check_budget( const mbedtls_ecp_group *grp, + mbedtls_ecp_restart_ctx *rs_ctx, + unsigned ops ); + +/* Utility macro for checking and updating ops budget */ +#define MBEDTLS_ECP_BUDGET( ops ) \ + MBEDTLS_MPI_CHK( mbedtls_ecp_check_budget( grp, rs_ctx, \ + (unsigned) (ops) ) ); + +#else /* MBEDTLS_ECP_RESTARTABLE */ + +#define MBEDTLS_ECP_BUDGET( ops ) /* no-op; for compatibility */ + +/* We want to declare restartable versions of existing functions anyway */ +typedef void mbedtls_ecp_restart_ctx; + +#endif /* MBEDTLS_ECP_RESTARTABLE */ + +/** + * \brief The ECP key-pair structure. + * + * A generic key-pair that may be used for ECDSA and fixed ECDH, for example. + * + * \note Members are deliberately in the same order as in the + * ::mbedtls_ecdsa_context structure. + */ +typedef struct mbedtls_ecp_keypair +{ + mbedtls_ecp_group grp; /*!< Elliptic curve and base point */ + mbedtls_mpi d; /*!< our secret value */ + mbedtls_ecp_point Q; /*!< our public value */ +} +mbedtls_ecp_keypair; + +/* + * Point formats, from RFC 4492's enum ECPointFormat + */ +#define MBEDTLS_ECP_PF_UNCOMPRESSED 0 /**< Uncompressed point format. */ +#define MBEDTLS_ECP_PF_COMPRESSED 1 /**< Compressed point format. */ + +/* + * Some other constants from RFC 4492 + */ +#define MBEDTLS_ECP_TLS_NAMED_CURVE 3 /**< The named_curve of ECCurveType. */ + +#if defined(MBEDTLS_ECP_RESTARTABLE) +/** + * \brief Set the maximum number of basic operations done in a row. + * + * If more operations are needed to complete a computation, + * #MBEDTLS_ERR_ECP_IN_PROGRESS will be returned by the + * function performing the computation. It is then the + * caller's responsibility to either call again with the same + * parameters until it returns 0 or an error code; or to free + * the restart context if the operation is to be aborted. + * + * It is strictly required that all input parameters and the + * restart context be the same on successive calls for the + * same operation, but output parameters need not be the + * same; they must not be used until the function finally + * returns 0. + * + * This only applies to functions whose documentation + * mentions they may return #MBEDTLS_ERR_ECP_IN_PROGRESS (or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS for functions in the + * SSL module). For functions that accept a "restart context" + * argument, passing NULL disables restart and makes the + * function equivalent to the function with the same name + * with \c _restartable removed. For functions in the ECDH + * module, restart is disabled unless the function accepts + * an "ECDH context" argument and + * mbedtls_ecdh_enable_restart() was previously called on + * that context. For function in the SSL module, restart is + * only enabled for specific sides and key exchanges + * (currently only for clients and ECDHE-ECDSA). + * + * \param max_ops Maximum number of basic operations done in a row. + * Default: 0 (unlimited). + * Lower (non-zero) values mean ECC functions will block for + * a lesser maximum amount of time. + * + * \note A "basic operation" is defined as a rough equivalent of a + * multiplication in GF(p) for the NIST P-256 curve. + * As an indication, with default settings, a scalar + * multiplication (full run of \c mbedtls_ecp_mul()) is: + * - about 3300 basic operations for P-256 + * - about 9400 basic operations for P-384 + * + * \note Very low values are not always respected: sometimes + * functions need to block for a minimum number of + * operations, and will do so even if max_ops is set to a + * lower value. That minimum depends on the curve size, and + * can be made lower by decreasing the value of + * \c MBEDTLS_ECP_WINDOW_SIZE. As an indication, here is the + * lowest effective value for various curves and values of + * that parameter (w for short): + * w=6 w=5 w=4 w=3 w=2 + * P-256 208 208 160 136 124 + * P-384 682 416 320 272 248 + * P-521 1364 832 640 544 496 + * + * \note This setting is currently ignored by Curve25519. + */ +void mbedtls_ecp_set_max_ops( unsigned max_ops ); + +/** + * \brief Check if restart is enabled (max_ops != 0) + * + * \return \c 0 if \c max_ops == 0 (restart disabled) + * \return \c 1 otherwise (restart enabled) + */ +int mbedtls_ecp_restart_is_enabled( void ); +#endif /* MBEDTLS_ECP_RESTARTABLE */ + +/** + * \brief This function retrieves the information defined in + * mbedtls_ecp_curve_info() for all supported curves in order + * of preference. + * + * \return A statically allocated array. The last entry is 0. + */ +const mbedtls_ecp_curve_info *mbedtls_ecp_curve_list( void ); + +/** + * \brief This function retrieves the list of internal group + * identifiers of all supported curves in the order of + * preference. + * + * \return A statically allocated array, + * terminated with MBEDTLS_ECP_DP_NONE. + */ +const mbedtls_ecp_group_id *mbedtls_ecp_grp_id_list( void ); + +/** + * \brief This function retrieves curve information from an internal + * group identifier. + * + * \param grp_id An \c MBEDTLS_ECP_DP_XXX value. + * + * \return The associated curve information on success. + * \return NULL on failure. + */ +const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_grp_id( mbedtls_ecp_group_id grp_id ); + +/** + * \brief This function retrieves curve information from a TLS + * NamedCurve value. + * + * \param tls_id An \c MBEDTLS_ECP_DP_XXX value. + * + * \return The associated curve information on success. + * \return NULL on failure. + */ +const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_tls_id( uint16_t tls_id ); + +/** + * \brief This function retrieves curve information from a + * human-readable name. + * + * \param name The human-readable name. + * + * \return The associated curve information on success. + * \return NULL on failure. + */ +const mbedtls_ecp_curve_info *mbedtls_ecp_curve_info_from_name( const char *name ); + +/** + * \brief This function initializes a point as zero. + * + * \param pt The point to initialize. + */ +void mbedtls_ecp_point_init( mbedtls_ecp_point *pt ); + +/** + * \brief This function initializes an ECP group context + * without loading any domain parameters. + * + * \note After this function is called, domain parameters + * for various ECP groups can be loaded through the + * mbedtls_ecp_group_load() or mbedtls_ecp_tls_read_group() + * functions. + */ +void mbedtls_ecp_group_init( mbedtls_ecp_group *grp ); + +/** + * \brief This function initializes a key pair as an invalid one. + * + * \param key The key pair to initialize. + */ +void mbedtls_ecp_keypair_init( mbedtls_ecp_keypair *key ); + +/** + * \brief This function frees the components of a point. + * + * \param pt The point to free. + */ +void mbedtls_ecp_point_free( mbedtls_ecp_point *pt ); + +/** + * \brief This function frees the components of an ECP group. + * + * \param grp The group to free. This may be \c NULL, in which + * case this function returns immediately. If it is not + * \c NULL, it must point to an initialized ECP group. + */ +void mbedtls_ecp_group_free( mbedtls_ecp_group *grp ); + +/** + * \brief This function frees the components of a key pair. + * + * \param key The key pair to free. This may be \c NULL, in which + * case this function returns immediately. If it is not + * \c NULL, it must point to an initialized ECP key pair. + */ +void mbedtls_ecp_keypair_free( mbedtls_ecp_keypair *key ); + +#if defined(MBEDTLS_ECP_RESTARTABLE) +/** + * \brief Initialize a restart context. + * + * \param ctx The restart context to initialize. This must + * not be \c NULL. + */ +void mbedtls_ecp_restart_init( mbedtls_ecp_restart_ctx *ctx ); + +/** + * \brief Free the components of a restart context. + * + * \param ctx The restart context to free. This may be \c NULL, in which + * case this function returns immediately. If it is not + * \c NULL, it must point to an initialized restart context. + */ +void mbedtls_ecp_restart_free( mbedtls_ecp_restart_ctx *ctx ); +#endif /* MBEDTLS_ECP_RESTARTABLE */ + +/** + * \brief This function copies the contents of point \p Q into + * point \p P. + * + * \param P The destination point. This must be initialized. + * \param Q The source point. This must be initialized. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. + * \return Another negative error code for other kinds of failure. + */ +int mbedtls_ecp_copy( mbedtls_ecp_point *P, const mbedtls_ecp_point *Q ); + +/** + * \brief This function copies the contents of group \p src into + * group \p dst. + * + * \param dst The destination group. This must be initialized. + * \param src The source group. This must be initialized. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_group_copy( mbedtls_ecp_group *dst, + const mbedtls_ecp_group *src ); + +/** + * \brief This function sets a point to the point at infinity. + * + * \param pt The point to set. This must be initialized. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_set_zero( mbedtls_ecp_point *pt ); + +/** + * \brief This function checks if a point is the point at infinity. + * + * \param pt The point to test. This must be initialized. + * + * \return \c 1 if the point is zero. + * \return \c 0 if the point is non-zero. + * \return A negative error code on failure. + */ +int mbedtls_ecp_is_zero( mbedtls_ecp_point *pt ); + +/** + * \brief This function compares two points. + * + * \note This assumes that the points are normalized. Otherwise, + * they may compare as "not equal" even if they are. + * + * \param P The first point to compare. This must be initialized. + * \param Q The second point to compare. This must be initialized. + * + * \return \c 0 if the points are equal. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the points are not equal. + */ +int mbedtls_ecp_point_cmp( const mbedtls_ecp_point *P, + const mbedtls_ecp_point *Q ); + +/** + * \brief This function imports a non-zero point from two ASCII + * strings. + * + * \param P The destination point. This must be initialized. + * \param radix The numeric base of the input. + * \param x The first affine coordinate, as a null-terminated string. + * \param y The second affine coordinate, as a null-terminated string. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_MPI_XXX error code on failure. + */ +int mbedtls_ecp_point_read_string( mbedtls_ecp_point *P, int radix, + const char *x, const char *y ); + +/** + * \brief This function exports a point into unsigned binary data. + * + * \param grp The group to which the point should belong. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param P The point to export. This must be initialized. + * \param format The point format. This must be either + * #MBEDTLS_ECP_PF_COMPRESSED or #MBEDTLS_ECP_PF_UNCOMPRESSED. + * \param olen The address at which to store the length of + * the output in Bytes. This must not be \c NULL. + * \param buf The output buffer. This must be a writable buffer + * of length \p buflen Bytes. + * \param buflen The length of the output buffer \p buf in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output buffer + * is too small to hold the point. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_point_write_binary( const mbedtls_ecp_group *grp, const mbedtls_ecp_point *P, + int format, size_t *olen, + unsigned char *buf, size_t buflen ); + +/** + * \brief This function imports a point from unsigned binary data. + * + * \note This function does not check that the point actually + * belongs to the given group, see mbedtls_ecp_check_pubkey() + * for that. + * + * \param grp The group to which the point should belong. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param P The destination context to import the point to. + * This must be initialized. + * \param buf The input buffer. This must be a readable buffer + * of length \p ilen Bytes. + * \param ilen The length of the input buffer \p buf in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the input is invalid. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. + * \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the point format + * is not implemented. + */ +int mbedtls_ecp_point_read_binary( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *P, + const unsigned char *buf, size_t ilen ); + +/** + * \brief This function imports a point from a TLS ECPoint record. + * + * \note On function return, \p *buf is updated to point immediately + * after the ECPoint record. + * + * \param grp The ECP group to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param pt The destination point. + * \param buf The address of the pointer to the start of the input buffer. + * \param len The length of the buffer. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_MPI_XXX error code on initialization + * failure. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid. + */ +int mbedtls_ecp_tls_read_point( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *pt, + const unsigned char **buf, size_t len ); + +/** + * \brief This function exports a point as a TLS ECPoint record + * defined in RFC 4492, Section 5.4. + * + * \param grp The ECP group to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param pt The point to be exported. This must be initialized. + * \param format The point format to use. This must be either + * #MBEDTLS_ECP_PF_COMPRESSED or #MBEDTLS_ECP_PF_UNCOMPRESSED. + * \param olen The address at which to store the length in Bytes + * of the data written. + * \param buf The target buffer. This must be a writable buffer of + * length \p blen Bytes. + * \param blen The length of the target buffer \p buf in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the input is invalid. + * \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the target buffer + * is too small to hold the exported point. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_tls_write_point( const mbedtls_ecp_group *grp, + const mbedtls_ecp_point *pt, + int format, size_t *olen, + unsigned char *buf, size_t blen ); + +/** + * \brief This function sets up an ECP group context + * from a standardized set of domain parameters. + * + * \note The index should be a value of the NamedCurve enum, + * as defined in <em>RFC-4492: Elliptic Curve Cryptography + * (ECC) Cipher Suites for Transport Layer Security (TLS)</em>, + * usually in the form of an \c MBEDTLS_ECP_DP_XXX macro. + * + * \param grp The group context to setup. This must be initialized. + * \param id The identifier of the domain parameter set to load. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if \p id doesn't + * correspond to a known group. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_group_load( mbedtls_ecp_group *grp, mbedtls_ecp_group_id id ); + +/** + * \brief This function sets up an ECP group context from a TLS + * ECParameters record as defined in RFC 4492, Section 5.4. + * + * \note The read pointer \p buf is updated to point right after + * the ECParameters record on exit. + * + * \param grp The group context to setup. This must be initialized. + * \param buf The address of the pointer to the start of the input buffer. + * \param len The length of the input buffer \c *buf in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid. + * \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the group is not + * recognized. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_tls_read_group( mbedtls_ecp_group *grp, + const unsigned char **buf, size_t len ); + +/** + * \brief This function extracts an elliptic curve group ID from a + * TLS ECParameters record as defined in RFC 4492, Section 5.4. + * + * \note The read pointer \p buf is updated to point right after + * the ECParameters record on exit. + * + * \param grp The address at which to store the group id. + * This must not be \c NULL. + * \param buf The address of the pointer to the start of the input buffer. + * \param len The length of the input buffer \c *buf in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if input is invalid. + * \return #MBEDTLS_ERR_ECP_FEATURE_UNAVAILABLE if the group is not + * recognized. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_tls_read_group_id( mbedtls_ecp_group_id *grp, + const unsigned char **buf, + size_t len ); +/** + * \brief This function exports an elliptic curve as a TLS + * ECParameters record as defined in RFC 4492, Section 5.4. + * + * \param grp The ECP group to be exported. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param olen The address at which to store the number of Bytes written. + * This must not be \c NULL. + * \param buf The buffer to write to. This must be a writable buffer + * of length \p blen Bytes. + * \param blen The length of the output buffer \p buf in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL if the output + * buffer is too small to hold the exported group. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_tls_write_group( const mbedtls_ecp_group *grp, + size_t *olen, + unsigned char *buf, size_t blen ); + +/** + * \brief This function performs a scalar multiplication of a point + * by an integer: \p R = \p m * \p P. + * + * It is not thread-safe to use same group in multiple threads. + * + * \note To prevent timing attacks, this function + * executes the exact same sequence of base-field + * operations for any valid \p m. It avoids any if-branch or + * array index depending on the value of \p m. + * + * \note If \p f_rng is not NULL, it is used to randomize + * intermediate results to prevent potential timing attacks + * targeting these results. We recommend always providing + * a non-NULL \p f_rng. The overhead is negligible. + * + * \param grp The ECP group to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param R The point in which to store the result of the calculation. + * This must be initialized. + * \param m The integer by which to multiply. This must be initialized. + * \param P The point to multiply. This must be initialized. + * \param f_rng The RNG function. This may be \c NULL if randomization + * of intermediate results isn't desired (discouraged). + * \param p_rng The RNG context to be passed to \p p_rng. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m is not a valid private + * key, or \p P is not a valid public key. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_mul( mbedtls_ecp_group *grp, mbedtls_ecp_point *R, + const mbedtls_mpi *m, const mbedtls_ecp_point *P, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); + +/** + * \brief This function performs multiplication of a point by + * an integer: \p R = \p m * \p P in a restartable way. + * + * \see mbedtls_ecp_mul() + * + * \note This function does the same as \c mbedtls_ecp_mul(), but + * it can return early and restart according to the limit set + * with \c mbedtls_ecp_set_max_ops() to reduce blocking. + * + * \param grp The ECP group to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param R The point in which to store the result of the calculation. + * This must be initialized. + * \param m The integer by which to multiply. This must be initialized. + * \param P The point to multiply. This must be initialized. + * \param f_rng The RNG function. This may be \c NULL if randomization + * of intermediate results isn't desired (discouraged). + * \param p_rng The RNG context to be passed to \p p_rng. + * \param rs_ctx The restart context (NULL disables restart). + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m is not a valid private + * key, or \p P is not a valid public key. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_mul_restartable( mbedtls_ecp_group *grp, mbedtls_ecp_point *R, + const mbedtls_mpi *m, const mbedtls_ecp_point *P, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, + mbedtls_ecp_restart_ctx *rs_ctx ); + +/** + * \brief This function performs multiplication and addition of two + * points by integers: \p R = \p m * \p P + \p n * \p Q + * + * It is not thread-safe to use same group in multiple threads. + * + * \note In contrast to mbedtls_ecp_mul(), this function does not + * guarantee a constant execution flow and timing. + * + * \param grp The ECP group to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param R The point in which to store the result of the calculation. + * This must be initialized. + * \param m The integer by which to multiply \p P. + * This must be initialized. + * \param P The point to multiply by \p m. This must be initialized. + * \param n The integer by which to multiply \p Q. + * This must be initialized. + * \param Q The point to be multiplied by \p n. + * This must be initialized. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m or \p n are not + * valid private keys, or \p P or \p Q are not valid public + * keys. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_muladd( mbedtls_ecp_group *grp, mbedtls_ecp_point *R, + const mbedtls_mpi *m, const mbedtls_ecp_point *P, + const mbedtls_mpi *n, const mbedtls_ecp_point *Q ); + +/** + * \brief This function performs multiplication and addition of two + * points by integers: \p R = \p m * \p P + \p n * \p Q in a + * restartable way. + * + * \see \c mbedtls_ecp_muladd() + * + * \note This function works the same as \c mbedtls_ecp_muladd(), + * but it can return early and restart according to the limit + * set with \c mbedtls_ecp_set_max_ops() to reduce blocking. + * + * \param grp The ECP group to use. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param R The point in which to store the result of the calculation. + * This must be initialized. + * \param m The integer by which to multiply \p P. + * This must be initialized. + * \param P The point to multiply by \p m. This must be initialized. + * \param n The integer by which to multiply \p Q. + * This must be initialized. + * \param Q The point to be multiplied by \p n. + * This must be initialized. + * \param rs_ctx The restart context (NULL disables restart). + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_ECP_INVALID_KEY if \p m or \p n are not + * valid private keys, or \p P or \p Q are not valid public + * keys. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_muladd_restartable( + mbedtls_ecp_group *grp, mbedtls_ecp_point *R, + const mbedtls_mpi *m, const mbedtls_ecp_point *P, + const mbedtls_mpi *n, const mbedtls_ecp_point *Q, + mbedtls_ecp_restart_ctx *rs_ctx ); + +/** + * \brief This function checks that a point is a valid public key + * on this curve. + * + * It only checks that the point is non-zero, has + * valid coordinates and lies on the curve. It does not verify + * that it is indeed a multiple of \p G. This additional + * check is computationally more expensive, is not required + * by standards, and should not be necessary if the group + * used has a small cofactor. In particular, it is useless for + * the NIST groups which all have a cofactor of 1. + * + * \note This function uses bare components rather than an + * ::mbedtls_ecp_keypair structure, to ease use with other + * structures, such as ::mbedtls_ecdh_context or + * ::mbedtls_ecdsa_context. + * + * \param grp The ECP group the point should belong to. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param pt The point to check. This must be initialized. + * + * \return \c 0 if the point is a valid public key. + * \return #MBEDTLS_ERR_ECP_INVALID_KEY if the point is not + * a valid public key for the given curve. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_check_pubkey( const mbedtls_ecp_group *grp, + const mbedtls_ecp_point *pt ); + +/** + * \brief This function checks that an \p mbedtls_mpi is a + * valid private key for this curve. + * + * \note This function uses bare components rather than an + * ::mbedtls_ecp_keypair structure to ease use with other + * structures, such as ::mbedtls_ecdh_context or + * ::mbedtls_ecdsa_context. + * + * \param grp The ECP group the private key should belong to. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param d The integer to check. This must be initialized. + * + * \return \c 0 if the point is a valid private key. + * \return #MBEDTLS_ERR_ECP_INVALID_KEY if the point is not a valid + * private key for the given curve. + * \return Another negative error code on other kinds of failure. + */ +int mbedtls_ecp_check_privkey( const mbedtls_ecp_group *grp, + const mbedtls_mpi *d ); + +/** + * \brief This function generates a private key. + * + * \param grp The ECP group to generate a private key for. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param d The destination MPI (secret part). This must be initialized. + * \param f_rng The RNG function. This must not be \c NULL. + * \param p_rng The RNG parameter to be passed to \p f_rng. This may be + * \c NULL if \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code + * on failure. + */ +int mbedtls_ecp_gen_privkey( const mbedtls_ecp_group *grp, + mbedtls_mpi *d, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function generates a keypair with a configurable base + * point. + * + * \note This function uses bare components rather than an + * ::mbedtls_ecp_keypair structure to ease use with other + * structures, such as ::mbedtls_ecdh_context or + * ::mbedtls_ecdsa_context. + * + * \param grp The ECP group to generate a key pair for. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param G The base point to use. This must be initialized + * and belong to \p grp. It replaces the default base + * point \c grp->G used by mbedtls_ecp_gen_keypair(). + * \param d The destination MPI (secret part). + * This must be initialized. + * \param Q The destination point (public part). + * This must be initialized. + * \param f_rng The RNG function. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may + * be \c NULL if \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code + * on failure. + */ +int mbedtls_ecp_gen_keypair_base( mbedtls_ecp_group *grp, + const mbedtls_ecp_point *G, + mbedtls_mpi *d, mbedtls_ecp_point *Q, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function generates an ECP keypair. + * + * \note This function uses bare components rather than an + * ::mbedtls_ecp_keypair structure to ease use with other + * structures, such as ::mbedtls_ecdh_context or + * ::mbedtls_ecdsa_context. + * + * \param grp The ECP group to generate a key pair for. + * This must be initialized and have group parameters + * set, for example through mbedtls_ecp_group_load(). + * \param d The destination MPI (secret part). + * This must be initialized. + * \param Q The destination point (public part). + * This must be initialized. + * \param f_rng The RNG function. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may + * be \c NULL if \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code + * on failure. + */ +int mbedtls_ecp_gen_keypair( mbedtls_ecp_group *grp, mbedtls_mpi *d, + mbedtls_ecp_point *Q, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function generates an ECP key. + * + * \param grp_id The ECP group identifier. + * \param key The destination key. This must be initialized. + * \param f_rng The RNG function to use. This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may + * be \c NULL if \p f_rng doesn't need a context argument. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_ECP_XXX or \c MBEDTLS_MPI_XXX error code + * on failure. + */ +int mbedtls_ecp_gen_key( mbedtls_ecp_group_id grp_id, mbedtls_ecp_keypair *key, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief This function checks that the keypair objects + * \p pub and \p prv have the same group and the + * same public point, and that the private key in + * \p prv is consistent with the public key. + * + * \param pub The keypair structure holding the public key. This + * must be initialized. If it contains a private key, that + * part is ignored. + * \param prv The keypair structure holding the full keypair. + * This must be initialized. + * + * \return \c 0 on success, meaning that the keys are valid and match. + * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the keys are invalid or do not match. + * \return An \c MBEDTLS_ERR_ECP_XXX or an \c MBEDTLS_ERR_MPI_XXX + * error code on calculation failure. + */ +int mbedtls_ecp_check_pub_priv( const mbedtls_ecp_keypair *pub, + const mbedtls_ecp_keypair *prv ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief The ECP checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_ecp_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* ecp.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecp_internal.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecp_internal.h new file mode 100644 index 000000000..7625ed48e --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ecp_internal.h @@ -0,0 +1,299 @@ +/** + * \file ecp_internal.h + * + * \brief Function declarations for alternative implementation of elliptic curve + * point arithmetic. + */ +/* + * Copyright (C) 2016, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +/* + * References: + * + * [1] BERNSTEIN, Daniel J. Curve25519: new Diffie-Hellman speed records. + * <http://cr.yp.to/ecdh/curve25519-20060209.pdf> + * + * [2] CORON, Jean-S'ebastien. Resistance against differential power analysis + * for elliptic curve cryptosystems. In : Cryptographic Hardware and + * Embedded Systems. Springer Berlin Heidelberg, 1999. p. 292-302. + * <http://link.springer.com/chapter/10.1007/3-540-48059-5_25> + * + * [3] HEDABOU, Mustapha, PINEL, Pierre, et B'EN'ETEAU, Lucien. A comb method to + * render ECC resistant against Side Channel Attacks. IACR Cryptology + * ePrint Archive, 2004, vol. 2004, p. 342. + * <http://eprint.iacr.org/2004/342.pdf> + * + * [4] Certicom Research. SEC 2: Recommended Elliptic Curve Domain Parameters. + * <http://www.secg.org/sec2-v2.pdf> + * + * [5] HANKERSON, Darrel, MENEZES, Alfred J., VANSTONE, Scott. Guide to Elliptic + * Curve Cryptography. + * + * [6] Digital Signature Standard (DSS), FIPS 186-4. + * <http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-4.pdf> + * + * [7] Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer + * Security (TLS), RFC 4492. + * <https://tools.ietf.org/search/rfc4492> + * + * [8] <http://www.hyperelliptic.org/EFD/g1p/auto-shortw-jacobian.html> + * + * [9] COHEN, Henri. A Course in Computational Algebraic Number Theory. + * Springer Science & Business Media, 1 Aug 2000 + */ + +#ifndef MBEDTLS_ECP_INTERNAL_H +#define MBEDTLS_ECP_INTERNAL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#if defined(MBEDTLS_ECP_INTERNAL_ALT) + +/** + * \brief Indicate if the Elliptic Curve Point module extension can + * handle the group. + * + * \param grp The pointer to the elliptic curve group that will be the + * basis of the cryptographic computations. + * + * \return Non-zero if successful. + */ +unsigned char mbedtls_internal_ecp_grp_capable( const mbedtls_ecp_group *grp ); + +/** + * \brief Initialise the Elliptic Curve Point module extension. + * + * If mbedtls_internal_ecp_grp_capable returns true for a + * group, this function has to be able to initialise the + * module for it. + * + * This module can be a driver to a crypto hardware + * accelerator, for which this could be an initialise function. + * + * \param grp The pointer to the group the module needs to be + * initialised for. + * + * \return 0 if successful. + */ +int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp ); + +/** + * \brief Frees and deallocates the Elliptic Curve Point module + * extension. + * + * \param grp The pointer to the group the module was initialised for. + */ +void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp ); + +#if defined(ECP_SHORTWEIERSTRASS) + +#if defined(MBEDTLS_ECP_RANDOMIZE_JAC_ALT) +/** + * \brief Randomize jacobian coordinates: + * (X, Y, Z) -> (l^2 X, l^3 Y, l Z) for random l. + * + * \param grp Pointer to the group representing the curve. + * + * \param pt The point on the curve to be randomised, given with Jacobian + * coordinates. + * + * \param f_rng A function pointer to the random number generator. + * + * \param p_rng A pointer to the random number generator state. + * + * \return 0 if successful. + */ +int mbedtls_internal_ecp_randomize_jac( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *pt, int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); +#endif + +#if defined(MBEDTLS_ECP_ADD_MIXED_ALT) +/** + * \brief Addition: R = P + Q, mixed affine-Jacobian coordinates. + * + * The coordinates of Q must be normalized (= affine), + * but those of P don't need to. R is not normalized. + * + * This function is used only as a subrutine of + * ecp_mul_comb(). + * + * Special cases: (1) P or Q is zero, (2) R is zero, + * (3) P == Q. + * None of these cases can happen as intermediate step in + * ecp_mul_comb(): + * - at each step, P, Q and R are multiples of the base + * point, the factor being less than its order, so none of + * them is zero; + * - Q is an odd multiple of the base point, P an even + * multiple, due to the choice of precomputed points in the + * modified comb method. + * So branches for these cases do not leak secret information. + * + * We accept Q->Z being unset (saving memory in tables) as + * meaning 1. + * + * Cost in field operations if done by [5] 3.22: + * 1A := 8M + 3S + * + * \param grp Pointer to the group representing the curve. + * + * \param R Pointer to a point structure to hold the result. + * + * \param P Pointer to the first summand, given with Jacobian + * coordinates + * + * \param Q Pointer to the second summand, given with affine + * coordinates. + * + * \return 0 if successful. + */ +int mbedtls_internal_ecp_add_mixed( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *R, const mbedtls_ecp_point *P, + const mbedtls_ecp_point *Q ); +#endif + +/** + * \brief Point doubling R = 2 P, Jacobian coordinates. + * + * Cost: 1D := 3M + 4S (A == 0) + * 4M + 4S (A == -3) + * 3M + 6S + 1a otherwise + * when the implementation is based on the "dbl-1998-cmo-2" + * doubling formulas in [8] and standard optimizations are + * applied when curve parameter A is one of { 0, -3 }. + * + * \param grp Pointer to the group representing the curve. + * + * \param R Pointer to a point structure to hold the result. + * + * \param P Pointer to the point that has to be doubled, given with + * Jacobian coordinates. + * + * \return 0 if successful. + */ +#if defined(MBEDTLS_ECP_DOUBLE_JAC_ALT) +int mbedtls_internal_ecp_double_jac( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *R, const mbedtls_ecp_point *P ); +#endif + +/** + * \brief Normalize jacobian coordinates of an array of (pointers to) + * points. + * + * Using Montgomery's trick to perform only one inversion mod P + * the cost is: + * 1N(t) := 1I + (6t - 3)M + 1S + * (See for example Algorithm 10.3.4. in [9]) + * + * This function is used only as a subrutine of + * ecp_mul_comb(). + * + * Warning: fails (returning an error) if one of the points is + * zero! + * This should never happen, see choice of w in ecp_mul_comb(). + * + * \param grp Pointer to the group representing the curve. + * + * \param T Array of pointers to the points to normalise. + * + * \param t_len Number of elements in the array. + * + * \return 0 if successful, + * an error if one of the points is zero. + */ +#if defined(MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT) +int mbedtls_internal_ecp_normalize_jac_many( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *T[], size_t t_len ); +#endif + +/** + * \brief Normalize jacobian coordinates so that Z == 0 || Z == 1. + * + * Cost in field operations if done by [5] 3.2.1: + * 1N := 1I + 3M + 1S + * + * \param grp Pointer to the group representing the curve. + * + * \param pt pointer to the point to be normalised. This is an + * input/output parameter. + * + * \return 0 if successful. + */ +#if defined(MBEDTLS_ECP_NORMALIZE_JAC_ALT) +int mbedtls_internal_ecp_normalize_jac( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *pt ); +#endif + +#endif /* ECP_SHORTWEIERSTRASS */ + +#if defined(ECP_MONTGOMERY) + +#if defined(MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT) +int mbedtls_internal_ecp_double_add_mxz( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *R, mbedtls_ecp_point *S, const mbedtls_ecp_point *P, + const mbedtls_ecp_point *Q, const mbedtls_mpi *d ); +#endif + +/** + * \brief Randomize projective x/z coordinates: + * (X, Z) -> (l X, l Z) for random l + * + * \param grp pointer to the group representing the curve + * + * \param P the point on the curve to be randomised given with + * projective coordinates. This is an input/output parameter. + * + * \param f_rng a function pointer to the random number generator + * + * \param p_rng a pointer to the random number generator state + * + * \return 0 if successful + */ +#if defined(MBEDTLS_ECP_RANDOMIZE_MXZ_ALT) +int mbedtls_internal_ecp_randomize_mxz( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *P, int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); +#endif + +/** + * \brief Normalize Montgomery x/z coordinates: X = X/Z, Z = 1. + * + * \param grp pointer to the group representing the curve + * + * \param P pointer to the point to be normalised. This is an + * input/output parameter. + * + * \return 0 if successful + */ +#if defined(MBEDTLS_ECP_NORMALIZE_MXZ_ALT) +int mbedtls_internal_ecp_normalize_mxz( const mbedtls_ecp_group *grp, + mbedtls_ecp_point *P ); +#endif + +#endif /* ECP_MONTGOMERY */ + +#endif /* MBEDTLS_ECP_INTERNAL_ALT */ + +#endif /* ecp_internal.h */ + diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/entropy.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/entropy.h new file mode 100644 index 000000000..ca06dc3c5 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/entropy.h @@ -0,0 +1,289 @@ +/** + * \file entropy.h + * + * \brief Entropy accumulator implementation + */ +/* + * Copyright (C) 2006-2016, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_ENTROPY_H +#define MBEDTLS_ENTROPY_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +#if defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256) +#include "sha512.h" +#define MBEDTLS_ENTROPY_SHA512_ACCUMULATOR +#else +#if defined(MBEDTLS_SHA256_C) +#define MBEDTLS_ENTROPY_SHA256_ACCUMULATOR +#include "sha256.h" +#endif +#endif + +#if defined(MBEDTLS_THREADING_C) +#include "threading.h" +#endif + +#if defined(MBEDTLS_HAVEGE_C) +#include "havege.h" +#endif + +#define MBEDTLS_ERR_ENTROPY_SOURCE_FAILED -0x003C /**< Critical entropy source failure. */ +#define MBEDTLS_ERR_ENTROPY_MAX_SOURCES -0x003E /**< No more sources can be added. */ +#define MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED -0x0040 /**< No sources have been added to poll. */ +#define MBEDTLS_ERR_ENTROPY_NO_STRONG_SOURCE -0x003D /**< No strong sources have been added to poll. */ +#define MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR -0x003F /**< Read/write error in file. */ + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ + +#if !defined(MBEDTLS_ENTROPY_MAX_SOURCES) +#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ +#endif + +#if !defined(MBEDTLS_ENTROPY_MAX_GATHER) +#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */ +#endif + +/* \} name SECTION: Module settings */ + +#if defined(MBEDTLS_ENTROPY_SHA512_ACCUMULATOR) +#define MBEDTLS_ENTROPY_BLOCK_SIZE 64 /**< Block size of entropy accumulator (SHA-512) */ +#else +#define MBEDTLS_ENTROPY_BLOCK_SIZE 32 /**< Block size of entropy accumulator (SHA-256) */ +#endif + +#define MBEDTLS_ENTROPY_MAX_SEED_SIZE 1024 /**< Maximum size of seed we read from seed file */ +#define MBEDTLS_ENTROPY_SOURCE_MANUAL MBEDTLS_ENTROPY_MAX_SOURCES + +#define MBEDTLS_ENTROPY_SOURCE_STRONG 1 /**< Entropy source is strong */ +#define MBEDTLS_ENTROPY_SOURCE_WEAK 0 /**< Entropy source is weak */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Entropy poll callback pointer + * + * \param data Callback-specific data pointer + * \param output Data to fill + * \param len Maximum size to provide + * \param olen The actual amount of bytes put into the buffer (Can be 0) + * + * \return 0 if no critical failures occurred, + * MBEDTLS_ERR_ENTROPY_SOURCE_FAILED otherwise + */ +typedef int (*mbedtls_entropy_f_source_ptr)(void *data, unsigned char *output, size_t len, + size_t *olen); + +/** + * \brief Entropy source state + */ +typedef struct mbedtls_entropy_source_state +{ + mbedtls_entropy_f_source_ptr f_source; /**< The entropy source callback */ + void * p_source; /**< The callback data pointer */ + size_t size; /**< Amount received in bytes */ + size_t threshold; /**< Minimum bytes required before release */ + int strong; /**< Is the source strong? */ +} +mbedtls_entropy_source_state; + +/** + * \brief Entropy context structure + */ +typedef struct mbedtls_entropy_context +{ + int accumulator_started; +#if defined(MBEDTLS_ENTROPY_SHA512_ACCUMULATOR) + mbedtls_sha512_context accumulator; +#else + mbedtls_sha256_context accumulator; +#endif + int source_count; + mbedtls_entropy_source_state source[MBEDTLS_ENTROPY_MAX_SOURCES]; +#if defined(MBEDTLS_HAVEGE_C) + mbedtls_havege_state havege_data; +#endif +#if defined(MBEDTLS_THREADING_C) + mbedtls_threading_mutex_t mutex; /*!< mutex */ +#endif +#if defined(MBEDTLS_ENTROPY_NV_SEED) + int initial_entropy_run; +#endif +} +mbedtls_entropy_context; + +/** + * \brief Initialize the context + * + * \param ctx Entropy context to initialize + */ +void mbedtls_entropy_init( mbedtls_entropy_context *ctx ); + +/** + * \brief Free the data in the context + * + * \param ctx Entropy context to free + */ +void mbedtls_entropy_free( mbedtls_entropy_context *ctx ); + +/** + * \brief Adds an entropy source to poll + * (Thread-safe if MBEDTLS_THREADING_C is enabled) + * + * \param ctx Entropy context + * \param f_source Entropy function + * \param p_source Function data + * \param threshold Minimum required from source before entropy is released + * ( with mbedtls_entropy_func() ) (in bytes) + * \param strong MBEDTLS_ENTROPY_SOURCE_STRONG or + * MBEDTLS_ENTROPY_SOURCE_WEAK. + * At least one strong source needs to be added. + * Weaker sources (such as the cycle counter) can be used as + * a complement. + * + * \return 0 if successful or MBEDTLS_ERR_ENTROPY_MAX_SOURCES + */ +int mbedtls_entropy_add_source( mbedtls_entropy_context *ctx, + mbedtls_entropy_f_source_ptr f_source, void *p_source, + size_t threshold, int strong ); + +/** + * \brief Trigger an extra gather poll for the accumulator + * (Thread-safe if MBEDTLS_THREADING_C is enabled) + * + * \param ctx Entropy context + * + * \return 0 if successful, or MBEDTLS_ERR_ENTROPY_SOURCE_FAILED + */ +int mbedtls_entropy_gather( mbedtls_entropy_context *ctx ); + +/** + * \brief Retrieve entropy from the accumulator + * (Maximum length: MBEDTLS_ENTROPY_BLOCK_SIZE) + * (Thread-safe if MBEDTLS_THREADING_C is enabled) + * + * \param data Entropy context + * \param output Buffer to fill + * \param len Number of bytes desired, must be at most MBEDTLS_ENTROPY_BLOCK_SIZE + * + * \return 0 if successful, or MBEDTLS_ERR_ENTROPY_SOURCE_FAILED + */ +int mbedtls_entropy_func( void *data, unsigned char *output, size_t len ); + +/** + * \brief Add data to the accumulator manually + * (Thread-safe if MBEDTLS_THREADING_C is enabled) + * + * \param ctx Entropy context + * \param data Data to add + * \param len Length of data + * + * \return 0 if successful + */ +int mbedtls_entropy_update_manual( mbedtls_entropy_context *ctx, + const unsigned char *data, size_t len ); + +#if defined(MBEDTLS_ENTROPY_NV_SEED) +/** + * \brief Trigger an update of the seed file in NV by using the + * current entropy pool. + * + * \param ctx Entropy context + * + * \return 0 if successful + */ +int mbedtls_entropy_update_nv_seed( mbedtls_entropy_context *ctx ); +#endif /* MBEDTLS_ENTROPY_NV_SEED */ + +#if defined(MBEDTLS_FS_IO) +/** + * \brief Write a seed file + * + * \param ctx Entropy context + * \param path Name of the file + * + * \return 0 if successful, + * MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR on file error, or + * MBEDTLS_ERR_ENTROPY_SOURCE_FAILED + */ +int mbedtls_entropy_write_seed_file( mbedtls_entropy_context *ctx, const char *path ); + +/** + * \brief Read and update a seed file. Seed is added to this + * instance. No more than MBEDTLS_ENTROPY_MAX_SEED_SIZE bytes are + * read from the seed file. The rest is ignored. + * + * \param ctx Entropy context + * \param path Name of the file + * + * \return 0 if successful, + * MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR on file error, + * MBEDTLS_ERR_ENTROPY_SOURCE_FAILED + */ +int mbedtls_entropy_update_seed_file( mbedtls_entropy_context *ctx, const char *path ); +#endif /* MBEDTLS_FS_IO */ + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief Checkup routine + * + * This module self-test also calls the entropy self-test, + * mbedtls_entropy_source_self_test(); + * + * \return 0 if successful, or 1 if a test failed + */ +int mbedtls_entropy_self_test( int verbose ); + +#if defined(MBEDTLS_ENTROPY_HARDWARE_ALT) +/** + * \brief Checkup routine + * + * Verifies the integrity of the hardware entropy source + * provided by the function 'mbedtls_hardware_poll()'. + * + * Note this is the only hardware entropy source that is known + * at link time, and other entropy sources configured + * dynamically at runtime by the function + * mbedtls_entropy_add_source() will not be tested. + * + * \return 0 if successful, or 1 if a test failed + */ +int mbedtls_entropy_source_self_test( int verbose ); +#endif /* MBEDTLS_ENTROPY_HARDWARE_ALT */ +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* entropy.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/entropy_poll.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/entropy_poll.h new file mode 100644 index 000000000..94dd657eb --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/entropy_poll.h @@ -0,0 +1,110 @@ +/** + * \file entropy_poll.h + * + * \brief Platform-specific and custom entropy polling functions + */ +/* + * Copyright (C) 2006-2016, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_ENTROPY_POLL_H +#define MBEDTLS_ENTROPY_POLL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Default thresholds for built-in sources, in bytes + */ +#define MBEDTLS_ENTROPY_MIN_PLATFORM 32 /**< Minimum for platform source */ +#define MBEDTLS_ENTROPY_MIN_HAVEGE 32 /**< Minimum for HAVEGE */ +#define MBEDTLS_ENTROPY_MIN_HARDCLOCK 4 /**< Minimum for mbedtls_timing_hardclock() */ +#if !defined(MBEDTLS_ENTROPY_MIN_HARDWARE) +#define MBEDTLS_ENTROPY_MIN_HARDWARE 32 /**< Minimum for the hardware source */ +#endif + +/** + * \brief Entropy poll callback that provides 0 entropy. + */ +#if defined(MBEDTLS_TEST_NULL_ENTROPY) + int mbedtls_null_entropy_poll( void *data, + unsigned char *output, size_t len, size_t *olen ); +#endif + +#if !defined(MBEDTLS_NO_PLATFORM_ENTROPY) +/** + * \brief Platform-specific entropy poll callback + */ +int mbedtls_platform_entropy_poll( void *data, + unsigned char *output, size_t len, size_t *olen ); +#endif + +#if defined(MBEDTLS_HAVEGE_C) +/** + * \brief HAVEGE based entropy poll callback + * + * Requires an HAVEGE state as its data pointer. + */ +int mbedtls_havege_poll( void *data, + unsigned char *output, size_t len, size_t *olen ); +#endif + +#if defined(MBEDTLS_TIMING_C) +/** + * \brief mbedtls_timing_hardclock-based entropy poll callback + */ +int mbedtls_hardclock_poll( void *data, + unsigned char *output, size_t len, size_t *olen ); +#endif + +#if defined(MBEDTLS_ENTROPY_HARDWARE_ALT) +/** + * \brief Entropy poll callback for a hardware source + * + * \warning This is not provided by mbed TLS! + * See \c MBEDTLS_ENTROPY_HARDWARE_ALT in config.h. + * + * \note This must accept NULL as its first argument. + */ +int mbedtls_hardware_poll( void *data, + unsigned char *output, size_t len, size_t *olen ); +#endif + +#if defined(MBEDTLS_ENTROPY_NV_SEED) +/** + * \brief Entropy poll callback for a non-volatile seed file + * + * \note This must accept NULL as its first argument. + */ +int mbedtls_nv_seed_poll( void *data, + unsigned char *output, size_t len, size_t *olen ); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* entropy_poll.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/error.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/error.h new file mode 100644 index 000000000..bee0fe485 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/error.h @@ -0,0 +1,129 @@ +/** + * \file error.h + * + * \brief Error to string translation + */ +/* + * Copyright (C) 2006-2018, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_ERROR_H +#define MBEDTLS_ERROR_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +/** + * Error code layout. + * + * Currently we try to keep all error codes within the negative space of 16 + * bits signed integers to support all platforms (-0x0001 - -0x7FFF). In + * addition we'd like to give two layers of information on the error if + * possible. + * + * For that purpose the error codes are segmented in the following manner: + * + * 16 bit error code bit-segmentation + * + * 1 bit - Unused (sign bit) + * 3 bits - High level module ID + * 5 bits - Module-dependent error code + * 7 bits - Low level module errors + * + * For historical reasons, low-level error codes are divided in even and odd, + * even codes were assigned first, and -1 is reserved for other errors. + * + * Low-level module errors (0x0002-0x007E, 0x0003-0x007F) + * + * Module Nr Codes assigned + * MPI 7 0x0002-0x0010 + * GCM 3 0x0012-0x0014 0x0013-0x0013 + * BLOWFISH 3 0x0016-0x0018 0x0017-0x0017 + * THREADING 3 0x001A-0x001E + * AES 5 0x0020-0x0022 0x0021-0x0025 + * CAMELLIA 3 0x0024-0x0026 0x0027-0x0027 + * XTEA 2 0x0028-0x0028 0x0029-0x0029 + * BASE64 2 0x002A-0x002C + * OID 1 0x002E-0x002E 0x000B-0x000B + * PADLOCK 1 0x0030-0x0030 + * DES 2 0x0032-0x0032 0x0033-0x0033 + * CTR_DBRG 4 0x0034-0x003A + * ENTROPY 3 0x003C-0x0040 0x003D-0x003F + * NET 13 0x0042-0x0052 0x0043-0x0049 + * ARIA 4 0x0058-0x005E + * ASN1 7 0x0060-0x006C + * CMAC 1 0x007A-0x007A + * PBKDF2 1 0x007C-0x007C + * HMAC_DRBG 4 0x0003-0x0009 + * CCM 3 0x000D-0x0011 + * ARC4 1 0x0019-0x0019 + * MD2 1 0x002B-0x002B + * MD4 1 0x002D-0x002D + * MD5 1 0x002F-0x002F + * RIPEMD160 1 0x0031-0x0031 + * SHA1 1 0x0035-0x0035 0x0073-0x0073 + * SHA256 1 0x0037-0x0037 0x0074-0x0074 + * SHA512 1 0x0039-0x0039 0x0075-0x0075 + * CHACHA20 3 0x0051-0x0055 + * POLY1305 3 0x0057-0x005B + * CHACHAPOLY 2 0x0054-0x0056 + * PLATFORM 1 0x0070-0x0072 + * + * High-level module nr (3 bits - 0x0...-0x7...) + * Name ID Nr of Errors + * PEM 1 9 + * PKCS#12 1 4 (Started from top) + * X509 2 20 + * PKCS5 2 4 (Started from top) + * DHM 3 11 + * PK 3 15 (Started from top) + * RSA 4 11 + * ECP 4 10 (Started from top) + * MD 5 5 + * HKDF 5 1 (Started from top) + * CIPHER 6 8 + * SSL 6 23 (Started from top) + * SSL 7 32 + * + * Module dependent error code (5 bits 0x.00.-0x.F8.) + */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Translate a mbed TLS error code into a string representation, + * Result is truncated if necessary and always includes a terminating + * null byte. + * + * \param errnum error code + * \param buffer buffer to place representation in + * \param buflen length of the buffer + */ +void mbedtls_strerror( int errnum, char *buffer, size_t buflen ); + +#ifdef __cplusplus +} +#endif + +#endif /* error.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/gcm.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/gcm.h new file mode 100644 index 000000000..fd130abd7 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/gcm.h @@ -0,0 +1,326 @@ +/** + * \file gcm.h + * + * \brief This file contains GCM definitions and functions. + * + * The Galois/Counter Mode (GCM) for 128-bit block ciphers is defined + * in <em>D. McGrew, J. Viega, The Galois/Counter Mode of Operation + * (GCM), Natl. Inst. Stand. Technol.</em> + * + * For more information on GCM, see <em>NIST SP 800-38D: Recommendation for + * Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC</em>. + * + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_GCM_H +#define MBEDTLS_GCM_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "cipher.h" + +#include <stdint.h> + +#define MBEDTLS_GCM_ENCRYPT 1 +#define MBEDTLS_GCM_DECRYPT 0 + +#define MBEDTLS_ERR_GCM_AUTH_FAILED -0x0012 /**< Authenticated decryption failed. */ + +/* MBEDTLS_ERR_GCM_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_GCM_HW_ACCEL_FAILED -0x0013 /**< GCM hardware accelerator failed. */ + +#define MBEDTLS_ERR_GCM_BAD_INPUT -0x0014 /**< Bad input parameters to function. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_GCM_ALT) + +/** + * \brief The GCM context structure. + */ +typedef struct mbedtls_gcm_context +{ + mbedtls_cipher_context_t cipher_ctx; /*!< The cipher context used. */ + uint64_t HL[16]; /*!< Precalculated HTable low. */ + uint64_t HH[16]; /*!< Precalculated HTable high. */ + uint64_t len; /*!< The total length of the encrypted data. */ + uint64_t add_len; /*!< The total length of the additional data. */ + unsigned char base_ectr[16]; /*!< The first ECTR for tag. */ + unsigned char y[16]; /*!< The Y working value. */ + unsigned char buf[16]; /*!< The buf working value. */ + int mode; /*!< The operation to perform: + #MBEDTLS_GCM_ENCRYPT or + #MBEDTLS_GCM_DECRYPT. */ +} +mbedtls_gcm_context; + +#else /* !MBEDTLS_GCM_ALT */ +#include "gcm_alt.h" +#endif /* !MBEDTLS_GCM_ALT */ + +/** + * \brief This function initializes the specified GCM context, + * to make references valid, and prepares the context + * for mbedtls_gcm_setkey() or mbedtls_gcm_free(). + * + * The function does not bind the GCM context to a particular + * cipher, nor set the key. For this purpose, use + * mbedtls_gcm_setkey(). + * + * \param ctx The GCM context to initialize. This must not be \c NULL. + */ +void mbedtls_gcm_init( mbedtls_gcm_context *ctx ); + +/** + * \brief This function associates a GCM context with a + * cipher algorithm and a key. + * + * \param ctx The GCM context. This must be initialized. + * \param cipher The 128-bit block cipher to use. + * \param key The encryption key. This must be a readable buffer of at + * least \p keybits bits. + * \param keybits The key size in bits. Valid options are: + * <ul><li>128 bits</li> + * <li>192 bits</li> + * <li>256 bits</li></ul> + * + * \return \c 0 on success. + * \return A cipher-specific error code on failure. + */ +int mbedtls_gcm_setkey( mbedtls_gcm_context *ctx, + mbedtls_cipher_id_t cipher, + const unsigned char *key, + unsigned int keybits ); + +/** + * \brief This function performs GCM encryption or decryption of a buffer. + * + * \note For encryption, the output buffer can be the same as the + * input buffer. For decryption, the output buffer cannot be + * the same as input buffer. If the buffers overlap, the output + * buffer must trail at least 8 Bytes behind the input buffer. + * + * \warning When this function performs a decryption, it outputs the + * authentication tag and does not verify that the data is + * authentic. You should use this function to perform encryption + * only. For decryption, use mbedtls_gcm_auth_decrypt() instead. + * + * \param ctx The GCM context to use for encryption or decryption. This + * must be initialized. + * \param mode The operation to perform: + * - #MBEDTLS_GCM_ENCRYPT to perform authenticated encryption. + * The ciphertext is written to \p output and the + * authentication tag is written to \p tag. + * - #MBEDTLS_GCM_DECRYPT to perform decryption. + * The plaintext is written to \p output and the + * authentication tag is written to \p tag. + * Note that this mode is not recommended, because it does + * not verify the authenticity of the data. For this reason, + * you should use mbedtls_gcm_auth_decrypt() instead of + * calling this function in decryption mode. + * \param length The length of the input data, which is equal to the length + * of the output data. + * \param iv The initialization vector. This must be a readable buffer of + * at least \p iv_len Bytes. + * \param iv_len The length of the IV. + * \param add The buffer holding the additional data. This must be of at + * least that size in Bytes. + * \param add_len The length of the additional data. + * \param input The buffer holding the input data. If \p length is greater + * than zero, this must be a readable buffer of at least that + * size in Bytes. + * \param output The buffer for holding the output data. If \p length is greater + * than zero, this must be a writable buffer of at least that + * size in Bytes. + * \param tag_len The length of the tag to generate. + * \param tag The buffer for holding the tag. This must be a readable + * buffer of at least \p tag_len Bytes. + * + * \return \c 0 if the encryption or decryption was performed + * successfully. Note that in #MBEDTLS_GCM_DECRYPT mode, + * this does not indicate that the data is authentic. + * \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are + * not valid or a cipher-specific error code if the encryption + * or decryption failed. + */ +int mbedtls_gcm_crypt_and_tag( mbedtls_gcm_context *ctx, + int mode, + size_t length, + const unsigned char *iv, + size_t iv_len, + const unsigned char *add, + size_t add_len, + const unsigned char *input, + unsigned char *output, + size_t tag_len, + unsigned char *tag ); + +/** + * \brief This function performs a GCM authenticated decryption of a + * buffer. + * + * \note For decryption, the output buffer cannot be the same as + * input buffer. If the buffers overlap, the output buffer + * must trail at least 8 Bytes behind the input buffer. + * + * \param ctx The GCM context. This must be initialized. + * \param length The length of the ciphertext to decrypt, which is also + * the length of the decrypted plaintext. + * \param iv The initialization vector. This must be a readable buffer + * of at least \p iv_len Bytes. + * \param iv_len The length of the IV. + * \param add The buffer holding the additional data. This must be of at + * least that size in Bytes. + * \param add_len The length of the additional data. + * \param tag The buffer holding the tag to verify. This must be a + * readable buffer of at least \p tag_len Bytes. + * \param tag_len The length of the tag to verify. + * \param input The buffer holding the ciphertext. If \p length is greater + * than zero, this must be a readable buffer of at least that + * size. + * \param output The buffer for holding the decrypted plaintext. If \p length + * is greater than zero, this must be a writable buffer of at + * least that size. + * + * \return \c 0 if successful and authenticated. + * \return #MBEDTLS_ERR_GCM_AUTH_FAILED if the tag does not match. + * \return #MBEDTLS_ERR_GCM_BAD_INPUT if the lengths or pointers are + * not valid or a cipher-specific error code if the decryption + * failed. + */ +int mbedtls_gcm_auth_decrypt( mbedtls_gcm_context *ctx, + size_t length, + const unsigned char *iv, + size_t iv_len, + const unsigned char *add, + size_t add_len, + const unsigned char *tag, + size_t tag_len, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function starts a GCM encryption or decryption + * operation. + * + * \param ctx The GCM context. This must be initialized. + * \param mode The operation to perform: #MBEDTLS_GCM_ENCRYPT or + * #MBEDTLS_GCM_DECRYPT. + * \param iv The initialization vector. This must be a readable buffer of + * at least \p iv_len Bytes. + * \param iv_len The length of the IV. + * \param add The buffer holding the additional data, or \c NULL + * if \p add_len is \c 0. + * \param add_len The length of the additional data. If \c 0, + * \p add may be \c NULL. + * + * \return \c 0 on success. + */ +int mbedtls_gcm_starts( mbedtls_gcm_context *ctx, + int mode, + const unsigned char *iv, + size_t iv_len, + const unsigned char *add, + size_t add_len ); + +/** + * \brief This function feeds an input buffer into an ongoing GCM + * encryption or decryption operation. + * + * ` The function expects input to be a multiple of 16 + * Bytes. Only the last call before calling + * mbedtls_gcm_finish() can be less than 16 Bytes. + * + * \note For decryption, the output buffer cannot be the same as + * input buffer. If the buffers overlap, the output buffer + * must trail at least 8 Bytes behind the input buffer. + * + * \param ctx The GCM context. This must be initialized. + * \param length The length of the input data. This must be a multiple of + * 16 except in the last call before mbedtls_gcm_finish(). + * \param input The buffer holding the input data. If \p length is greater + * than zero, this must be a readable buffer of at least that + * size in Bytes. + * \param output The buffer for holding the output data. If \p length is + * greater than zero, this must be a writable buffer of at + * least that size in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure. + */ +int mbedtls_gcm_update( mbedtls_gcm_context *ctx, + size_t length, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function finishes the GCM operation and generates + * the authentication tag. + * + * It wraps up the GCM stream, and generates the + * tag. The tag can have a maximum length of 16 Bytes. + * + * \param ctx The GCM context. This must be initialized. + * \param tag The buffer for holding the tag. This must be a readable + * buffer of at least \p tag_len Bytes. + * \param tag_len The length of the tag to generate. This must be at least + * four. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_GCM_BAD_INPUT on failure. + */ +int mbedtls_gcm_finish( mbedtls_gcm_context *ctx, + unsigned char *tag, + size_t tag_len ); + +/** + * \brief This function clears a GCM context and the underlying + * cipher sub-context. + * + * \param ctx The GCM context to clear. If this is \c NULL, the call has + * no effect. Otherwise, this must be initialized. + */ +void mbedtls_gcm_free( mbedtls_gcm_context *ctx ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief The GCM checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_gcm_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + + +#endif /* gcm.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/havege.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/havege.h new file mode 100644 index 000000000..4c1c86087 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/havege.h @@ -0,0 +1,81 @@ +/** + * \file havege.h + * + * \brief HAVEGE: HArdware Volatile Entropy Gathering and Expansion + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_HAVEGE_H +#define MBEDTLS_HAVEGE_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +#define MBEDTLS_HAVEGE_COLLECT_SIZE 1024 + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief HAVEGE state structure + */ +typedef struct mbedtls_havege_state +{ + int PT1, PT2, offset[2]; + int pool[MBEDTLS_HAVEGE_COLLECT_SIZE]; + int WALK[8192]; +} +mbedtls_havege_state; + +/** + * \brief HAVEGE initialization + * + * \param hs HAVEGE state to be initialized + */ +void mbedtls_havege_init( mbedtls_havege_state *hs ); + +/** + * \brief Clear HAVEGE state + * + * \param hs HAVEGE state to be cleared + */ +void mbedtls_havege_free( mbedtls_havege_state *hs ); + +/** + * \brief HAVEGE rand function + * + * \param p_rng A HAVEGE state + * \param output Buffer to fill + * \param len Length of buffer + * + * \return 0 + */ +int mbedtls_havege_random( void *p_rng, unsigned char *output, size_t len ); + +#ifdef __cplusplus +} +#endif + +#endif /* havege.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/hkdf.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/hkdf.h new file mode 100644 index 000000000..40ee64eb0 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/hkdf.h @@ -0,0 +1,141 @@ +/** + * \file hkdf.h + * + * \brief This file contains the HKDF interface. + * + * The HMAC-based Extract-and-Expand Key Derivation Function (HKDF) is + * specified by RFC 5869. + */ +/* + * Copyright (C) 2016-2018, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_HKDF_H +#define MBEDTLS_HKDF_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "md.h" + +/** + * \name HKDF Error codes + * \{ + */ +#define MBEDTLS_ERR_HKDF_BAD_INPUT_DATA -0x5F80 /**< Bad input parameters to function. */ +/* \} name */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief This is the HMAC-based Extract-and-Expand Key Derivation Function + * (HKDF). + * + * \param md A hash function; md.size denotes the length of the hash + * function output in bytes. + * \param salt An optional salt value (a non-secret random value); + * if the salt is not provided, a string of all zeros of + * md.size length is used as the salt. + * \param salt_len The length in bytes of the optional \p salt. + * \param ikm The input keying material. + * \param ikm_len The length in bytes of \p ikm. + * \param info An optional context and application specific information + * string. This can be a zero-length string. + * \param info_len The length of \p info in bytes. + * \param okm The output keying material of \p okm_len bytes. + * \param okm_len The length of the output keying material in bytes. This + * must be less than or equal to 255 * md.size bytes. + * + * \return 0 on success. + * \return #MBEDTLS_ERR_HKDF_BAD_INPUT_DATA when the parameters are invalid. + * \return An MBEDTLS_ERR_MD_* error for errors returned from the underlying + * MD layer. + */ +int mbedtls_hkdf( const mbedtls_md_info_t *md, const unsigned char *salt, + size_t salt_len, const unsigned char *ikm, size_t ikm_len, + const unsigned char *info, size_t info_len, + unsigned char *okm, size_t okm_len ); + +/** + * \brief Take the input keying material \p ikm and extract from it a + * fixed-length pseudorandom key \p prk. + * + * \warning This function should only be used if the security of it has been + * studied and established in that particular context (eg. TLS 1.3 + * key schedule). For standard HKDF security guarantees use + * \c mbedtls_hkdf instead. + * + * \param md A hash function; md.size denotes the length of the + * hash function output in bytes. + * \param salt An optional salt value (a non-secret random value); + * if the salt is not provided, a string of all zeros + * of md.size length is used as the salt. + * \param salt_len The length in bytes of the optional \p salt. + * \param ikm The input keying material. + * \param ikm_len The length in bytes of \p ikm. + * \param[out] prk A pseudorandom key of at least md.size bytes. + * + * \return 0 on success. + * \return #MBEDTLS_ERR_HKDF_BAD_INPUT_DATA when the parameters are invalid. + * \return An MBEDTLS_ERR_MD_* error for errors returned from the underlying + * MD layer. + */ +int mbedtls_hkdf_extract( const mbedtls_md_info_t *md, + const unsigned char *salt, size_t salt_len, + const unsigned char *ikm, size_t ikm_len, + unsigned char *prk ); + +/** + * \brief Expand the supplied \p prk into several additional pseudorandom + * keys, which is the output of the HKDF. + * + * \warning This function should only be used if the security of it has been + * studied and established in that particular context (eg. TLS 1.3 + * key schedule). For standard HKDF security guarantees use + * \c mbedtls_hkdf instead. + * + * \param md A hash function; md.size denotes the length of the hash + * function output in bytes. + * \param prk A pseudorandom key of at least md.size bytes. \p prk is + * usually the output from the HKDF extract step. + * \param prk_len The length in bytes of \p prk. + * \param info An optional context and application specific information + * string. This can be a zero-length string. + * \param info_len The length of \p info in bytes. + * \param okm The output keying material of \p okm_len bytes. + * \param okm_len The length of the output keying material in bytes. This + * must be less than or equal to 255 * md.size bytes. + * + * \return 0 on success. + * \return #MBEDTLS_ERR_HKDF_BAD_INPUT_DATA when the parameters are invalid. + * \return An MBEDTLS_ERR_MD_* error for errors returned from the underlying + * MD layer. + */ +int mbedtls_hkdf_expand( const mbedtls_md_info_t *md, const unsigned char *prk, + size_t prk_len, const unsigned char *info, + size_t info_len, unsigned char *okm, size_t okm_len ); + +#ifdef __cplusplus +} +#endif + +#endif /* hkdf.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/hmac_drbg.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/hmac_drbg.h new file mode 100644 index 000000000..7eae32bbd --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/hmac_drbg.h @@ -0,0 +1,334 @@ +/** + * \file hmac_drbg.h + * + * \brief HMAC_DRBG (NIST SP 800-90A) + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_HMAC_DRBG_H +#define MBEDTLS_HMAC_DRBG_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "md.h" + +#if defined(MBEDTLS_THREADING_C) +#include "threading.h" +#endif + +/* + * Error codes + */ +#define MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG -0x0003 /**< Too many random requested in single call. */ +#define MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG -0x0005 /**< Input too large (Entropy + additional). */ +#define MBEDTLS_ERR_HMAC_DRBG_FILE_IO_ERROR -0x0007 /**< Read/write error in file. */ +#define MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED -0x0009 /**< The entropy source failed. */ + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ + +#if !defined(MBEDTLS_HMAC_DRBG_RESEED_INTERVAL) +#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by default */ +#endif + +#if !defined(MBEDTLS_HMAC_DRBG_MAX_INPUT) +#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */ +#endif + +#if !defined(MBEDTLS_HMAC_DRBG_MAX_REQUEST) +#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */ +#endif + +#if !defined(MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT) +#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */ +#endif + +/* \} name SECTION: Module settings */ + +#define MBEDTLS_HMAC_DRBG_PR_OFF 0 /**< No prediction resistance */ +#define MBEDTLS_HMAC_DRBG_PR_ON 1 /**< Prediction resistance enabled */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * HMAC_DRBG context. + */ +typedef struct mbedtls_hmac_drbg_context +{ + /* Working state: the key K is not stored explicitely, + * but is implied by the HMAC context */ + mbedtls_md_context_t md_ctx; /*!< HMAC context (inc. K) */ + unsigned char V[MBEDTLS_MD_MAX_SIZE]; /*!< V in the spec */ + int reseed_counter; /*!< reseed counter */ + + /* Administrative state */ + size_t entropy_len; /*!< entropy bytes grabbed on each (re)seed */ + int prediction_resistance; /*!< enable prediction resistance (Automatic + reseed before every random generation) */ + int reseed_interval; /*!< reseed interval */ + + /* Callbacks */ + int (*f_entropy)(void *, unsigned char *, size_t); /*!< entropy function */ + void *p_entropy; /*!< context for the entropy function */ + +#if defined(MBEDTLS_THREADING_C) + mbedtls_threading_mutex_t mutex; +#endif +} mbedtls_hmac_drbg_context; + +/** + * \brief HMAC_DRBG context initialization + * Makes the context ready for mbedtls_hmac_drbg_seed(), + * mbedtls_hmac_drbg_seed_buf() or + * mbedtls_hmac_drbg_free(). + * + * \param ctx HMAC_DRBG context to be initialized + */ +void mbedtls_hmac_drbg_init( mbedtls_hmac_drbg_context *ctx ); + +/** + * \brief HMAC_DRBG initial seeding + * Seed and setup entropy source for future reseeds. + * + * \param ctx HMAC_DRBG context to be seeded + * \param md_info MD algorithm to use for HMAC_DRBG + * \param f_entropy Entropy callback (p_entropy, buffer to fill, buffer + * length) + * \param p_entropy Entropy context + * \param custom Personalization data (Device specific identifiers) + * (Can be NULL) + * \param len Length of personalization data + * + * \note The "security strength" as defined by NIST is set to: + * 128 bits if md_alg is SHA-1, + * 192 bits if md_alg is SHA-224, + * 256 bits if md_alg is SHA-256 or higher. + * Note that SHA-256 is just as efficient as SHA-224. + * + * \return 0 if successful, or + * MBEDTLS_ERR_MD_BAD_INPUT_DATA, or + * MBEDTLS_ERR_MD_ALLOC_FAILED, or + * MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED. + */ +int mbedtls_hmac_drbg_seed( mbedtls_hmac_drbg_context *ctx, + const mbedtls_md_info_t * md_info, + int (*f_entropy)(void *, unsigned char *, size_t), + void *p_entropy, + const unsigned char *custom, + size_t len ); + +/** + * \brief Initilisation of simpified HMAC_DRBG (never reseeds). + * (For use with deterministic ECDSA.) + * + * \param ctx HMAC_DRBG context to be initialised + * \param md_info MD algorithm to use for HMAC_DRBG + * \param data Concatenation of entropy string and additional data + * \param data_len Length of data in bytes + * + * \return 0 if successful, or + * MBEDTLS_ERR_MD_BAD_INPUT_DATA, or + * MBEDTLS_ERR_MD_ALLOC_FAILED. + */ +int mbedtls_hmac_drbg_seed_buf( mbedtls_hmac_drbg_context *ctx, + const mbedtls_md_info_t * md_info, + const unsigned char *data, size_t data_len ); + +/** + * \brief Enable / disable prediction resistance (Default: Off) + * + * Note: If enabled, entropy is used for ctx->entropy_len before each call! + * Only use this if you have ample supply of good entropy! + * + * \param ctx HMAC_DRBG context + * \param resistance MBEDTLS_HMAC_DRBG_PR_ON or MBEDTLS_HMAC_DRBG_PR_OFF + */ +void mbedtls_hmac_drbg_set_prediction_resistance( mbedtls_hmac_drbg_context *ctx, + int resistance ); + +/** + * \brief Set the amount of entropy grabbed on each reseed + * (Default: given by the security strength, which + * depends on the hash used, see \c mbedtls_hmac_drbg_init() ) + * + * \param ctx HMAC_DRBG context + * \param len Amount of entropy to grab, in bytes + */ +void mbedtls_hmac_drbg_set_entropy_len( mbedtls_hmac_drbg_context *ctx, + size_t len ); + +/** + * \brief Set the reseed interval + * (Default: MBEDTLS_HMAC_DRBG_RESEED_INTERVAL) + * + * \param ctx HMAC_DRBG context + * \param interval Reseed interval + */ +void mbedtls_hmac_drbg_set_reseed_interval( mbedtls_hmac_drbg_context *ctx, + int interval ); + +/** + * \brief HMAC_DRBG update state + * + * \param ctx HMAC_DRBG context + * \param additional Additional data to update state with, or NULL + * \param add_len Length of additional data, or 0 + * + * \return \c 0 on success, or an error from the underlying + * hash calculation. + * + * \note Additional data is optional, pass NULL and 0 as second + * third argument if no additional data is being used. + */ +int mbedtls_hmac_drbg_update_ret( mbedtls_hmac_drbg_context *ctx, + const unsigned char *additional, size_t add_len ); + +/** + * \brief HMAC_DRBG reseeding (extracts data from entropy source) + * + * \param ctx HMAC_DRBG context + * \param additional Additional data to add to state (Can be NULL) + * \param len Length of additional data + * + * \return 0 if successful, or + * MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED + */ +int mbedtls_hmac_drbg_reseed( mbedtls_hmac_drbg_context *ctx, + const unsigned char *additional, size_t len ); + +/** + * \brief HMAC_DRBG generate random with additional update input + * + * Note: Automatically reseeds if reseed_counter is reached or PR is enabled. + * + * \param p_rng HMAC_DRBG context + * \param output Buffer to fill + * \param output_len Length of the buffer + * \param additional Additional data to update with (can be NULL) + * \param add_len Length of additional data (can be 0) + * + * \return 0 if successful, or + * MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED, or + * MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG, or + * MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG. + */ +int mbedtls_hmac_drbg_random_with_add( void *p_rng, + unsigned char *output, size_t output_len, + const unsigned char *additional, + size_t add_len ); + +/** + * \brief HMAC_DRBG generate random + * + * Note: Automatically reseeds if reseed_counter is reached or PR is enabled. + * + * \param p_rng HMAC_DRBG context + * \param output Buffer to fill + * \param out_len Length of the buffer + * + * \return 0 if successful, or + * MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED, or + * MBEDTLS_ERR_HMAC_DRBG_REQUEST_TOO_BIG + */ +int mbedtls_hmac_drbg_random( void *p_rng, unsigned char *output, size_t out_len ); + +/** + * \brief Free an HMAC_DRBG context + * + * \param ctx HMAC_DRBG context to free. + */ +void mbedtls_hmac_drbg_free( mbedtls_hmac_drbg_context *ctx ); + +#if ! defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief HMAC_DRBG update state + * + * \deprecated Superseded by mbedtls_hmac_drbg_update_ret() + * in 2.16.0. + * + * \param ctx HMAC_DRBG context + * \param additional Additional data to update state with, or NULL + * \param add_len Length of additional data, or 0 + * + * \note Additional data is optional, pass NULL and 0 as second + * third argument if no additional data is being used. + */ +MBEDTLS_DEPRECATED void mbedtls_hmac_drbg_update( + mbedtls_hmac_drbg_context *ctx, + const unsigned char *additional, size_t add_len ); +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_FS_IO) +/** + * \brief Write a seed file + * + * \param ctx HMAC_DRBG context + * \param path Name of the file + * + * \return 0 if successful, 1 on file error, or + * MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED + */ +int mbedtls_hmac_drbg_write_seed_file( mbedtls_hmac_drbg_context *ctx, const char *path ); + +/** + * \brief Read and update a seed file. Seed is added to this + * instance + * + * \param ctx HMAC_DRBG context + * \param path Name of the file + * + * \return 0 if successful, 1 on file error, + * MBEDTLS_ERR_HMAC_DRBG_ENTROPY_SOURCE_FAILED or + * MBEDTLS_ERR_HMAC_DRBG_INPUT_TOO_BIG + */ +int mbedtls_hmac_drbg_update_seed_file( mbedtls_hmac_drbg_context *ctx, const char *path ); +#endif /* MBEDTLS_FS_IO */ + + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_hmac_drbg_self_test( int verbose ); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* hmac_drbg.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md.h new file mode 100644 index 000000000..8bcf766a6 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md.h @@ -0,0 +1,468 @@ + /** + * \file md.h + * + * \brief This file contains the generic message-digest wrapper. + * + * \author Adriaan de Jong <dejong@fox-it.com> + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_MD_H +#define MBEDTLS_MD_H + +#include <stddef.h> + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#define MBEDTLS_ERR_MD_FEATURE_UNAVAILABLE -0x5080 /**< The selected feature is not available. */ +#define MBEDTLS_ERR_MD_BAD_INPUT_DATA -0x5100 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_MD_ALLOC_FAILED -0x5180 /**< Failed to allocate memory. */ +#define MBEDTLS_ERR_MD_FILE_IO_ERROR -0x5200 /**< Opening or reading of file failed. */ + +/* MBEDTLS_ERR_MD_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_MD_HW_ACCEL_FAILED -0x5280 /**< MD hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Supported message digests. + * + * \warning MD2, MD4, MD5 and SHA-1 are considered weak message digests and + * their use constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +typedef enum { + MBEDTLS_MD_NONE=0, /**< None. */ + MBEDTLS_MD_MD2, /**< The MD2 message digest. */ + MBEDTLS_MD_MD4, /**< The MD4 message digest. */ + MBEDTLS_MD_MD5, /**< The MD5 message digest. */ + MBEDTLS_MD_SHA1, /**< The SHA-1 message digest. */ + MBEDTLS_MD_SHA224, /**< The SHA-224 message digest. */ + MBEDTLS_MD_SHA256, /**< The SHA-256 message digest. */ + MBEDTLS_MD_SHA384, /**< The SHA-384 message digest. */ + MBEDTLS_MD_SHA512, /**< The SHA-512 message digest. */ + MBEDTLS_MD_RIPEMD160, /**< The RIPEMD-160 message digest. */ +} mbedtls_md_type_t; + +#if defined(MBEDTLS_SHA512_C) +#define MBEDTLS_MD_MAX_SIZE 64 /* longest known is SHA512 */ +#else +#define MBEDTLS_MD_MAX_SIZE 32 /* longest known is SHA256 or less */ +#endif + +/** + * Opaque struct defined in md_internal.h. + */ +typedef struct mbedtls_md_info_t mbedtls_md_info_t; + +/** + * The generic message-digest context. + */ +typedef struct mbedtls_md_context_t +{ + /** Information about the associated message digest. */ + const mbedtls_md_info_t *md_info; + + /** The digest-specific context. */ + void *md_ctx; + + /** The HMAC part of the context. */ + void *hmac_ctx; +} mbedtls_md_context_t; + +/** + * \brief This function returns the list of digests supported by the + * generic digest module. + * + * \return A statically allocated array of digests. Each element + * in the returned list is an integer belonging to the + * message-digest enumeration #mbedtls_md_type_t. + * The last entry is 0. + */ +const int *mbedtls_md_list( void ); + +/** + * \brief This function returns the message-digest information + * associated with the given digest name. + * + * \param md_name The name of the digest to search for. + * + * \return The message-digest information associated with \p md_name. + * \return NULL if the associated message-digest information is not found. + */ +const mbedtls_md_info_t *mbedtls_md_info_from_string( const char *md_name ); + +/** + * \brief This function returns the message-digest information + * associated with the given digest type. + * + * \param md_type The type of digest to search for. + * + * \return The message-digest information associated with \p md_type. + * \return NULL if the associated message-digest information is not found. + */ +const mbedtls_md_info_t *mbedtls_md_info_from_type( mbedtls_md_type_t md_type ); + +/** + * \brief This function initializes a message-digest context without + * binding it to a particular message-digest algorithm. + * + * This function should always be called first. It prepares the + * context for mbedtls_md_setup() for binding it to a + * message-digest algorithm. + */ +void mbedtls_md_init( mbedtls_md_context_t *ctx ); + +/** + * \brief This function clears the internal structure of \p ctx and + * frees any embedded internal structure, but does not free + * \p ctx itself. + * + * If you have called mbedtls_md_setup() on \p ctx, you must + * call mbedtls_md_free() when you are no longer using the + * context. + * Calling this function if you have previously + * called mbedtls_md_init() and nothing else is optional. + * You must not call this function if you have not called + * mbedtls_md_init(). + */ +void mbedtls_md_free( mbedtls_md_context_t *ctx ); + +#if ! defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief This function selects the message digest algorithm to use, + * and allocates internal structures. + * + * It should be called after mbedtls_md_init() or mbedtls_md_free(). + * Makes it necessary to call mbedtls_md_free() later. + * + * \deprecated Superseded by mbedtls_md_setup() in 2.0.0 + * + * \param ctx The context to set up. + * \param md_info The information structure of the message-digest algorithm + * to use. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + * \return #MBEDTLS_ERR_MD_ALLOC_FAILED on memory-allocation failure. + */ +int mbedtls_md_init_ctx( mbedtls_md_context_t *ctx, const mbedtls_md_info_t *md_info ) MBEDTLS_DEPRECATED; +#undef MBEDTLS_DEPRECATED +#endif /* MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief This function selects the message digest algorithm to use, + * and allocates internal structures. + * + * It should be called after mbedtls_md_init() or + * mbedtls_md_free(). Makes it necessary to call + * mbedtls_md_free() later. + * + * \param ctx The context to set up. + * \param md_info The information structure of the message-digest algorithm + * to use. + * \param hmac Defines if HMAC is used. 0: HMAC is not used (saves some memory), + * or non-zero: HMAC is used with this context. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + * \return #MBEDTLS_ERR_MD_ALLOC_FAILED on memory-allocation failure. + */ +int mbedtls_md_setup( mbedtls_md_context_t *ctx, const mbedtls_md_info_t *md_info, int hmac ); + +/** + * \brief This function clones the state of an message-digest + * context. + * + * \note You must call mbedtls_md_setup() on \c dst before calling + * this function. + * + * \note The two contexts must have the same type, + * for example, both are SHA-256. + * + * \warning This function clones the message-digest state, not the + * HMAC state. + * + * \param dst The destination context. + * \param src The context to be cloned. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification failure. + */ +int mbedtls_md_clone( mbedtls_md_context_t *dst, + const mbedtls_md_context_t *src ); + +/** + * \brief This function extracts the message-digest size from the + * message-digest information structure. + * + * \param md_info The information structure of the message-digest algorithm + * to use. + * + * \return The size of the message-digest output in Bytes. + */ +unsigned char mbedtls_md_get_size( const mbedtls_md_info_t *md_info ); + +/** + * \brief This function extracts the message-digest type from the + * message-digest information structure. + * + * \param md_info The information structure of the message-digest algorithm + * to use. + * + * \return The type of the message digest. + */ +mbedtls_md_type_t mbedtls_md_get_type( const mbedtls_md_info_t *md_info ); + +/** + * \brief This function extracts the message-digest name from the + * message-digest information structure. + * + * \param md_info The information structure of the message-digest algorithm + * to use. + * + * \return The name of the message digest. + */ +const char *mbedtls_md_get_name( const mbedtls_md_info_t *md_info ); + +/** + * \brief This function starts a message-digest computation. + * + * You must call this function after setting up the context + * with mbedtls_md_setup(), and before passing data with + * mbedtls_md_update(). + * + * \param ctx The generic message-digest context. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md_starts( mbedtls_md_context_t *ctx ); + +/** + * \brief This function feeds an input buffer into an ongoing + * message-digest computation. + * + * You must call mbedtls_md_starts() before calling this + * function. You may call this function multiple times. + * Afterwards, call mbedtls_md_finish(). + * + * \param ctx The generic message-digest context. + * \param input The buffer holding the input data. + * \param ilen The length of the input data. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md_update( mbedtls_md_context_t *ctx, const unsigned char *input, size_t ilen ); + +/** + * \brief This function finishes the digest operation, + * and writes the result to the output buffer. + * + * Call this function after a call to mbedtls_md_starts(), + * followed by any number of calls to mbedtls_md_update(). + * Afterwards, you may either clear the context with + * mbedtls_md_free(), or call mbedtls_md_starts() to reuse + * the context for another digest operation with the same + * algorithm. + * + * \param ctx The generic message-digest context. + * \param output The buffer for the generic message-digest checksum result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md_finish( mbedtls_md_context_t *ctx, unsigned char *output ); + +/** + * \brief This function calculates the message-digest of a buffer, + * with respect to a configurable message-digest algorithm + * in a single call. + * + * The result is calculated as + * Output = message_digest(input buffer). + * + * \param md_info The information structure of the message-digest algorithm + * to use. + * \param input The buffer holding the data. + * \param ilen The length of the input data. + * \param output The generic message-digest checksum result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md( const mbedtls_md_info_t *md_info, const unsigned char *input, size_t ilen, + unsigned char *output ); + +#if defined(MBEDTLS_FS_IO) +/** + * \brief This function calculates the message-digest checksum + * result of the contents of the provided file. + * + * The result is calculated as + * Output = message_digest(file contents). + * + * \param md_info The information structure of the message-digest algorithm + * to use. + * \param path The input file name. + * \param output The generic message-digest checksum result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_FILE_IO_ERROR on an I/O error accessing + * the file pointed by \p path. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA if \p md_info was NULL. + */ +int mbedtls_md_file( const mbedtls_md_info_t *md_info, const char *path, + unsigned char *output ); +#endif /* MBEDTLS_FS_IO */ + +/** + * \brief This function sets the HMAC key and prepares to + * authenticate a new message. + * + * Call this function after mbedtls_md_setup(), to use + * the MD context for an HMAC calculation, then call + * mbedtls_md_hmac_update() to provide the input data, and + * mbedtls_md_hmac_finish() to get the HMAC value. + * + * \param ctx The message digest context containing an embedded HMAC + * context. + * \param key The HMAC secret key. + * \param keylen The length of the HMAC key in Bytes. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md_hmac_starts( mbedtls_md_context_t *ctx, const unsigned char *key, + size_t keylen ); + +/** + * \brief This function feeds an input buffer into an ongoing HMAC + * computation. + * + * Call mbedtls_md_hmac_starts() or mbedtls_md_hmac_reset() + * before calling this function. + * You may call this function multiple times to pass the + * input piecewise. + * Afterwards, call mbedtls_md_hmac_finish(). + * + * \param ctx The message digest context containing an embedded HMAC + * context. + * \param input The buffer holding the input data. + * \param ilen The length of the input data. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md_hmac_update( mbedtls_md_context_t *ctx, const unsigned char *input, + size_t ilen ); + +/** + * \brief This function finishes the HMAC operation, and writes + * the result to the output buffer. + * + * Call this function after mbedtls_md_hmac_starts() and + * mbedtls_md_hmac_update() to get the HMAC value. Afterwards + * you may either call mbedtls_md_free() to clear the context, + * or call mbedtls_md_hmac_reset() to reuse the context with + * the same HMAC key. + * + * \param ctx The message digest context containing an embedded HMAC + * context. + * \param output The generic HMAC checksum result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md_hmac_finish( mbedtls_md_context_t *ctx, unsigned char *output); + +/** + * \brief This function prepares to authenticate a new message with + * the same key as the previous HMAC operation. + * + * You may call this function after mbedtls_md_hmac_finish(). + * Afterwards call mbedtls_md_hmac_update() to pass the new + * input. + * + * \param ctx The message digest context containing an embedded HMAC + * context. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md_hmac_reset( mbedtls_md_context_t *ctx ); + +/** + * \brief This function calculates the full generic HMAC + * on the input buffer with the provided key. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The HMAC result is calculated as + * output = generic HMAC(hmac key, input buffer). + * + * \param md_info The information structure of the message-digest algorithm + * to use. + * \param key The HMAC secret key. + * \param keylen The length of the HMAC secret key in Bytes. + * \param input The buffer holding the input data. + * \param ilen The length of the input data. + * \param output The generic HMAC result. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA on parameter-verification + * failure. + */ +int mbedtls_md_hmac( const mbedtls_md_info_t *md_info, const unsigned char *key, size_t keylen, + const unsigned char *input, size_t ilen, + unsigned char *output ); + +/* Internal use */ +int mbedtls_md_process( mbedtls_md_context_t *ctx, const unsigned char *data ); + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_MD_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md2.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md2.h new file mode 100644 index 000000000..fe97cf08d --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md2.h @@ -0,0 +1,306 @@ +/** + * \file md2.h + * + * \brief MD2 message digest algorithm (hash function) + * + * \warning MD2 is considered a weak message digest and its use constitutes a + * security risk. We recommend considering stronger message digests + * instead. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + * + */ +#ifndef MBEDTLS_MD2_H +#define MBEDTLS_MD2_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +/* MBEDTLS_ERR_MD2_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_MD2_HW_ACCEL_FAILED -0x002B /**< MD2 hardware accelerator failed */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_MD2_ALT) +// Regular implementation +// + +/** + * \brief MD2 context structure + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +typedef struct mbedtls_md2_context +{ + unsigned char cksum[16]; /*!< checksum of the data block */ + unsigned char state[48]; /*!< intermediate digest state */ + unsigned char buffer[16]; /*!< data block being processed */ + size_t left; /*!< amount of data in buffer */ +} +mbedtls_md2_context; + +#else /* MBEDTLS_MD2_ALT */ +#include "md2_alt.h" +#endif /* MBEDTLS_MD2_ALT */ + +/** + * \brief Initialize MD2 context + * + * \param ctx MD2 context to be initialized + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md2_init( mbedtls_md2_context *ctx ); + +/** + * \brief Clear MD2 context + * + * \param ctx MD2 context to be cleared + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md2_free( mbedtls_md2_context *ctx ); + +/** + * \brief Clone (the state of) an MD2 context + * + * \param dst The destination context + * \param src The context to be cloned + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md2_clone( mbedtls_md2_context *dst, + const mbedtls_md2_context *src ); + +/** + * \brief MD2 context setup + * + * \param ctx context to be initialized + * + * \return 0 if successful + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md2_starts_ret( mbedtls_md2_context *ctx ); + +/** + * \brief MD2 process buffer + * + * \param ctx MD2 context + * \param input buffer holding the data + * \param ilen length of the input data + * + * \return 0 if successful + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md2_update_ret( mbedtls_md2_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief MD2 final digest + * + * \param ctx MD2 context + * \param output MD2 checksum result + * + * \return 0 if successful + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md2_finish_ret( mbedtls_md2_context *ctx, + unsigned char output[16] ); + +/** + * \brief MD2 process data block (internal use only) + * + * \param ctx MD2 context + * + * \return 0 if successful + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_internal_md2_process( mbedtls_md2_context *ctx ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief MD2 context setup + * + * \deprecated Superseded by mbedtls_md2_starts_ret() in 2.7.0 + * + * \param ctx context to be initialized + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md2_starts( mbedtls_md2_context *ctx ); + +/** + * \brief MD2 process buffer + * + * \deprecated Superseded by mbedtls_md2_update_ret() in 2.7.0 + * + * \param ctx MD2 context + * \param input buffer holding the data + * \param ilen length of the input data + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md2_update( mbedtls_md2_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief MD2 final digest + * + * \deprecated Superseded by mbedtls_md2_finish_ret() in 2.7.0 + * + * \param ctx MD2 context + * \param output MD2 checksum result + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md2_finish( mbedtls_md2_context *ctx, + unsigned char output[16] ); + +/** + * \brief MD2 process data block (internal use only) + * + * \deprecated Superseded by mbedtls_internal_md2_process() in 2.7.0 + * + * \param ctx MD2 context + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md2_process( mbedtls_md2_context *ctx ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief Output = MD2( input buffer ) + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output MD2 checksum result + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md2_ret( const unsigned char *input, + size_t ilen, + unsigned char output[16] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief Output = MD2( input buffer ) + * + * \deprecated Superseded by mbedtls_md2_ret() in 2.7.0 + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output MD2 checksum result + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md2( const unsigned char *input, + size_t ilen, + unsigned char output[16] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + * + * \warning MD2 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md2_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_md2.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md4.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md4.h new file mode 100644 index 000000000..ce703c0ba --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md4.h @@ -0,0 +1,311 @@ +/** + * \file md4.h + * + * \brief MD4 message digest algorithm (hash function) + * + * \warning MD4 is considered a weak message digest and its use constitutes a + * security risk. We recommend considering stronger message digests + * instead. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + * + */ +#ifndef MBEDTLS_MD4_H +#define MBEDTLS_MD4_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +/* MBEDTLS_ERR_MD4_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_MD4_HW_ACCEL_FAILED -0x002D /**< MD4 hardware accelerator failed */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_MD4_ALT) +// Regular implementation +// + +/** + * \brief MD4 context structure + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +typedef struct mbedtls_md4_context +{ + uint32_t total[2]; /*!< number of bytes processed */ + uint32_t state[4]; /*!< intermediate digest state */ + unsigned char buffer[64]; /*!< data block being processed */ +} +mbedtls_md4_context; + +#else /* MBEDTLS_MD4_ALT */ +#include "md4_alt.h" +#endif /* MBEDTLS_MD4_ALT */ + +/** + * \brief Initialize MD4 context + * + * \param ctx MD4 context to be initialized + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md4_init( mbedtls_md4_context *ctx ); + +/** + * \brief Clear MD4 context + * + * \param ctx MD4 context to be cleared + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md4_free( mbedtls_md4_context *ctx ); + +/** + * \brief Clone (the state of) an MD4 context + * + * \param dst The destination context + * \param src The context to be cloned + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md4_clone( mbedtls_md4_context *dst, + const mbedtls_md4_context *src ); + +/** + * \brief MD4 context setup + * + * \param ctx context to be initialized + * + * \return 0 if successful + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + */ +int mbedtls_md4_starts_ret( mbedtls_md4_context *ctx ); + +/** + * \brief MD4 process buffer + * + * \param ctx MD4 context + * \param input buffer holding the data + * \param ilen length of the input data + * + * \return 0 if successful + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md4_update_ret( mbedtls_md4_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief MD4 final digest + * + * \param ctx MD4 context + * \param output MD4 checksum result + * + * \return 0 if successful + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md4_finish_ret( mbedtls_md4_context *ctx, + unsigned char output[16] ); + +/** + * \brief MD4 process data block (internal use only) + * + * \param ctx MD4 context + * \param data buffer holding one block of data + * + * \return 0 if successful + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_internal_md4_process( mbedtls_md4_context *ctx, + const unsigned char data[64] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief MD4 context setup + * + * \deprecated Superseded by mbedtls_md4_starts_ret() in 2.7.0 + * + * \param ctx context to be initialized + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md4_starts( mbedtls_md4_context *ctx ); + +/** + * \brief MD4 process buffer + * + * \deprecated Superseded by mbedtls_md4_update_ret() in 2.7.0 + * + * \param ctx MD4 context + * \param input buffer holding the data + * \param ilen length of the input data + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md4_update( mbedtls_md4_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief MD4 final digest + * + * \deprecated Superseded by mbedtls_md4_finish_ret() in 2.7.0 + * + * \param ctx MD4 context + * \param output MD4 checksum result + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md4_finish( mbedtls_md4_context *ctx, + unsigned char output[16] ); + +/** + * \brief MD4 process data block (internal use only) + * + * \deprecated Superseded by mbedtls_internal_md4_process() in 2.7.0 + * + * \param ctx MD4 context + * \param data buffer holding one block of data + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md4_process( mbedtls_md4_context *ctx, + const unsigned char data[64] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief Output = MD4( input buffer ) + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output MD4 checksum result + * + * \return 0 if successful + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md4_ret( const unsigned char *input, + size_t ilen, + unsigned char output[16] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief Output = MD4( input buffer ) + * + * \deprecated Superseded by mbedtls_md4_ret() in 2.7.0 + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output MD4 checksum result + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md4( const unsigned char *input, + size_t ilen, + unsigned char output[16] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + * + * \warning MD4 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md4_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_md4.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md5.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md5.h new file mode 100644 index 000000000..6eed6cc86 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md5.h @@ -0,0 +1,311 @@ +/** + * \file md5.h + * + * \brief MD5 message digest algorithm (hash function) + * + * \warning MD5 is considered a weak message digest and its use constitutes a + * security risk. We recommend considering stronger message + * digests instead. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_MD5_H +#define MBEDTLS_MD5_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +/* MBEDTLS_ERR_MD5_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_MD5_HW_ACCEL_FAILED -0x002F /**< MD5 hardware accelerator failed */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_MD5_ALT) +// Regular implementation +// + +/** + * \brief MD5 context structure + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +typedef struct mbedtls_md5_context +{ + uint32_t total[2]; /*!< number of bytes processed */ + uint32_t state[4]; /*!< intermediate digest state */ + unsigned char buffer[64]; /*!< data block being processed */ +} +mbedtls_md5_context; + +#else /* MBEDTLS_MD5_ALT */ +#include "md5_alt.h" +#endif /* MBEDTLS_MD5_ALT */ + +/** + * \brief Initialize MD5 context + * + * \param ctx MD5 context to be initialized + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md5_init( mbedtls_md5_context *ctx ); + +/** + * \brief Clear MD5 context + * + * \param ctx MD5 context to be cleared + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md5_free( mbedtls_md5_context *ctx ); + +/** + * \brief Clone (the state of) an MD5 context + * + * \param dst The destination context + * \param src The context to be cloned + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +void mbedtls_md5_clone( mbedtls_md5_context *dst, + const mbedtls_md5_context *src ); + +/** + * \brief MD5 context setup + * + * \param ctx context to be initialized + * + * \return 0 if successful + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md5_starts_ret( mbedtls_md5_context *ctx ); + +/** + * \brief MD5 process buffer + * + * \param ctx MD5 context + * \param input buffer holding the data + * \param ilen length of the input data + * + * \return 0 if successful + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md5_update_ret( mbedtls_md5_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief MD5 final digest + * + * \param ctx MD5 context + * \param output MD5 checksum result + * + * \return 0 if successful + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md5_finish_ret( mbedtls_md5_context *ctx, + unsigned char output[16] ); + +/** + * \brief MD5 process data block (internal use only) + * + * \param ctx MD5 context + * \param data buffer holding one block of data + * + * \return 0 if successful + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_internal_md5_process( mbedtls_md5_context *ctx, + const unsigned char data[64] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief MD5 context setup + * + * \deprecated Superseded by mbedtls_md5_starts_ret() in 2.7.0 + * + * \param ctx context to be initialized + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md5_starts( mbedtls_md5_context *ctx ); + +/** + * \brief MD5 process buffer + * + * \deprecated Superseded by mbedtls_md5_update_ret() in 2.7.0 + * + * \param ctx MD5 context + * \param input buffer holding the data + * \param ilen length of the input data + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md5_update( mbedtls_md5_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief MD5 final digest + * + * \deprecated Superseded by mbedtls_md5_finish_ret() in 2.7.0 + * + * \param ctx MD5 context + * \param output MD5 checksum result + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md5_finish( mbedtls_md5_context *ctx, + unsigned char output[16] ); + +/** + * \brief MD5 process data block (internal use only) + * + * \deprecated Superseded by mbedtls_internal_md5_process() in 2.7.0 + * + * \param ctx MD5 context + * \param data buffer holding one block of data + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md5_process( mbedtls_md5_context *ctx, + const unsigned char data[64] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief Output = MD5( input buffer ) + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output MD5 checksum result + * + * \return 0 if successful + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md5_ret( const unsigned char *input, + size_t ilen, + unsigned char output[16] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief Output = MD5( input buffer ) + * + * \deprecated Superseded by mbedtls_md5_ret() in 2.7.0 + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output MD5 checksum result + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +MBEDTLS_DEPRECATED void mbedtls_md5( const unsigned char *input, + size_t ilen, + unsigned char output[16] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + * + * \warning MD5 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +int mbedtls_md5_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_md5.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md_internal.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md_internal.h new file mode 100644 index 000000000..04de48291 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/md_internal.h @@ -0,0 +1,115 @@ +/** + * \file md_internal.h + * + * \brief Message digest wrappers. + * + * \warning This in an internal header. Do not include directly. + * + * \author Adriaan de Jong <dejong@fox-it.com> + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_MD_WRAP_H +#define MBEDTLS_MD_WRAP_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "md.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Message digest information. + * Allows message digest functions to be called in a generic way. + */ +struct mbedtls_md_info_t +{ + /** Digest identifier */ + mbedtls_md_type_t type; + + /** Name of the message digest */ + const char * name; + + /** Output length of the digest function in bytes */ + int size; + + /** Block length of the digest function in bytes */ + int block_size; + + /** Digest initialisation function */ + int (*starts_func)( void *ctx ); + + /** Digest update function */ + int (*update_func)( void *ctx, const unsigned char *input, size_t ilen ); + + /** Digest finalisation function */ + int (*finish_func)( void *ctx, unsigned char *output ); + + /** Generic digest function */ + int (*digest_func)( const unsigned char *input, size_t ilen, + unsigned char *output ); + + /** Allocate a new context */ + void * (*ctx_alloc_func)( void ); + + /** Free the given context */ + void (*ctx_free_func)( void *ctx ); + + /** Clone state from a context */ + void (*clone_func)( void *dst, const void *src ); + + /** Internal use only */ + int (*process_func)( void *ctx, const unsigned char *input ); +}; + +#if defined(MBEDTLS_MD2_C) +extern const mbedtls_md_info_t mbedtls_md2_info; +#endif +#if defined(MBEDTLS_MD4_C) +extern const mbedtls_md_info_t mbedtls_md4_info; +#endif +#if defined(MBEDTLS_MD5_C) +extern const mbedtls_md_info_t mbedtls_md5_info; +#endif +#if defined(MBEDTLS_RIPEMD160_C) +extern const mbedtls_md_info_t mbedtls_ripemd160_info; +#endif +#if defined(MBEDTLS_SHA1_C) +extern const mbedtls_md_info_t mbedtls_sha1_info; +#endif +#if defined(MBEDTLS_SHA256_C) +extern const mbedtls_md_info_t mbedtls_sha224_info; +extern const mbedtls_md_info_t mbedtls_sha256_info; +#endif +#if defined(MBEDTLS_SHA512_C) +extern const mbedtls_md_info_t mbedtls_sha384_info; +extern const mbedtls_md_info_t mbedtls_sha512_info; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_MD_WRAP_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/memory_buffer_alloc.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/memory_buffer_alloc.h new file mode 100644 index 000000000..705f9a636 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/memory_buffer_alloc.h @@ -0,0 +1,151 @@ +/** + * \file memory_buffer_alloc.h + * + * \brief Buffer-based memory allocator + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_MEMORY_BUFFER_ALLOC_H +#define MBEDTLS_MEMORY_BUFFER_ALLOC_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ + +#if !defined(MBEDTLS_MEMORY_ALIGN_MULTIPLE) +#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ +#endif + +/* \} name SECTION: Module settings */ + +#define MBEDTLS_MEMORY_VERIFY_NONE 0 +#define MBEDTLS_MEMORY_VERIFY_ALLOC (1 << 0) +#define MBEDTLS_MEMORY_VERIFY_FREE (1 << 1) +#define MBEDTLS_MEMORY_VERIFY_ALWAYS (MBEDTLS_MEMORY_VERIFY_ALLOC | MBEDTLS_MEMORY_VERIFY_FREE) + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Initialize use of stack-based memory allocator. + * The stack-based allocator does memory management inside the + * presented buffer and does not call calloc() and free(). + * It sets the global mbedtls_calloc() and mbedtls_free() pointers + * to its own functions. + * (Provided mbedtls_calloc() and mbedtls_free() are thread-safe if + * MBEDTLS_THREADING_C is defined) + * + * \note This code is not optimized and provides a straight-forward + * implementation of a stack-based memory allocator. + * + * \param buf buffer to use as heap + * \param len size of the buffer + */ +void mbedtls_memory_buffer_alloc_init( unsigned char *buf, size_t len ); + +/** + * \brief Free the mutex for thread-safety and clear remaining memory + */ +void mbedtls_memory_buffer_alloc_free( void ); + +/** + * \brief Determine when the allocator should automatically verify the state + * of the entire chain of headers / meta-data. + * (Default: MBEDTLS_MEMORY_VERIFY_NONE) + * + * \param verify One of MBEDTLS_MEMORY_VERIFY_NONE, MBEDTLS_MEMORY_VERIFY_ALLOC, + * MBEDTLS_MEMORY_VERIFY_FREE or MBEDTLS_MEMORY_VERIFY_ALWAYS + */ +void mbedtls_memory_buffer_set_verify( int verify ); + +#if defined(MBEDTLS_MEMORY_DEBUG) +/** + * \brief Print out the status of the allocated memory (primarily for use + * after a program should have de-allocated all memory) + * Prints out a list of 'still allocated' blocks and their stack + * trace if MBEDTLS_MEMORY_BACKTRACE is defined. + */ +void mbedtls_memory_buffer_alloc_status( void ); + +/** + * \brief Get the peak heap usage so far + * + * \param max_used Peak number of bytes in use or committed. This + * includes bytes in allocated blocks too small to split + * into smaller blocks but larger than the requested size. + * \param max_blocks Peak number of blocks in use, including free and used + */ +void mbedtls_memory_buffer_alloc_max_get( size_t *max_used, size_t *max_blocks ); + +/** + * \brief Reset peak statistics + */ +void mbedtls_memory_buffer_alloc_max_reset( void ); + +/** + * \brief Get the current heap usage + * + * \param cur_used Current number of bytes in use or committed. This + * includes bytes in allocated blocks too small to split + * into smaller blocks but larger than the requested size. + * \param cur_blocks Current number of blocks in use, including free and used + */ +void mbedtls_memory_buffer_alloc_cur_get( size_t *cur_used, size_t *cur_blocks ); +#endif /* MBEDTLS_MEMORY_DEBUG */ + +/** + * \brief Verifies that all headers in the memory buffer are correct + * and contain sane values. Helps debug buffer-overflow errors. + * + * Prints out first failure if MBEDTLS_MEMORY_DEBUG is defined. + * Prints out full header information if MBEDTLS_MEMORY_DEBUG + * is defined. (Includes stack trace information for each block if + * MBEDTLS_MEMORY_BACKTRACE is defined as well). + * + * \return 0 if verified, 1 otherwise + */ +int mbedtls_memory_buffer_alloc_verify( void ); + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if a test failed + */ +int mbedtls_memory_buffer_alloc_self_test( int verbose ); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* memory_buffer_alloc.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/net.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/net.h new file mode 100644 index 000000000..8cead58e5 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/net.h @@ -0,0 +1,37 @@ +/** + * \file net.h + * + * \brief Deprecated header file that includes net_sockets.h + * + * \deprecated Superseded by mbedtls/net_sockets.h + */ +/* + * Copyright (C) 2006-2016, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#include "net_sockets.h" +#if defined(MBEDTLS_DEPRECATED_WARNING) +#warning "Deprecated header file: Superseded by mbedtls/net_sockets.h" +#endif /* MBEDTLS_DEPRECATED_WARNING */ +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/net_sockets.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/net_sockets.h new file mode 100644 index 000000000..4c7ef00fe --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/net_sockets.h @@ -0,0 +1,271 @@ +/** + * \file net_sockets.h + * + * \brief Network sockets abstraction layer to integrate Mbed TLS into a + * BSD-style sockets API. + * + * The network sockets module provides an example integration of the + * Mbed TLS library into a BSD sockets implementation. The module is + * intended to be an example of how Mbed TLS can be integrated into a + * networking stack, as well as to be Mbed TLS's network integration + * for its supported platforms. + * + * The module is intended only to be used with the Mbed TLS library and + * is not intended to be used by third party application software + * directly. + * + * The supported platforms are as follows: + * * Microsoft Windows and Windows CE + * * POSIX/Unix platforms including Linux, OS X + * + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_NET_SOCKETS_H +#define MBEDTLS_NET_SOCKETS_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "ssl.h" + +#include <stddef.h> +#include <stdint.h> + +#define MBEDTLS_ERR_NET_SOCKET_FAILED -0x0042 /**< Failed to open a socket. */ +#define MBEDTLS_ERR_NET_CONNECT_FAILED -0x0044 /**< The connection to the given server / port failed. */ +#define MBEDTLS_ERR_NET_BIND_FAILED -0x0046 /**< Binding of the socket failed. */ +#define MBEDTLS_ERR_NET_LISTEN_FAILED -0x0048 /**< Could not listen on the socket. */ +#define MBEDTLS_ERR_NET_ACCEPT_FAILED -0x004A /**< Could not accept the incoming connection. */ +#define MBEDTLS_ERR_NET_RECV_FAILED -0x004C /**< Reading information from the socket failed. */ +#define MBEDTLS_ERR_NET_SEND_FAILED -0x004E /**< Sending information through the socket failed. */ +#define MBEDTLS_ERR_NET_CONN_RESET -0x0050 /**< Connection was reset by peer. */ +#define MBEDTLS_ERR_NET_UNKNOWN_HOST -0x0052 /**< Failed to get an IP address for the given hostname. */ +#define MBEDTLS_ERR_NET_BUFFER_TOO_SMALL -0x0043 /**< Buffer is too small to hold the data. */ +#define MBEDTLS_ERR_NET_INVALID_CONTEXT -0x0045 /**< The context is invalid, eg because it was free()ed. */ +#define MBEDTLS_ERR_NET_POLL_FAILED -0x0047 /**< Polling the net context failed. */ +#define MBEDTLS_ERR_NET_BAD_INPUT_DATA -0x0049 /**< Input invalid. */ + +#define MBEDTLS_NET_LISTEN_BACKLOG 10 /**< The backlog that listen() should use. */ + +#define MBEDTLS_NET_PROTO_TCP 0 /**< The TCP transport protocol */ +#define MBEDTLS_NET_PROTO_UDP 1 /**< The UDP transport protocol */ + +#define MBEDTLS_NET_POLL_READ 1 /**< Used in \c mbedtls_net_poll to check for pending data */ +#define MBEDTLS_NET_POLL_WRITE 2 /**< Used in \c mbedtls_net_poll to check if write possible */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Wrapper type for sockets. + * + * Currently backed by just a file descriptor, but might be more in the future + * (eg two file descriptors for combined IPv4 + IPv6 support, or additional + * structures for hand-made UDP demultiplexing). + */ +typedef struct mbedtls_net_context +{ + int fd; /**< The underlying file descriptor */ +} +mbedtls_net_context; + +/** + * \brief Initialize a context + * Just makes the context ready to be used or freed safely. + * + * \param ctx Context to initialize + */ +void mbedtls_net_init( mbedtls_net_context *ctx ); + +/** + * \brief Initiate a connection with host:port in the given protocol + * + * \param ctx Socket to use + * \param host Host to connect to + * \param port Port to connect to + * \param proto Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP + * + * \return 0 if successful, or one of: + * MBEDTLS_ERR_NET_SOCKET_FAILED, + * MBEDTLS_ERR_NET_UNKNOWN_HOST, + * MBEDTLS_ERR_NET_CONNECT_FAILED + * + * \note Sets the socket in connected mode even with UDP. + */ +int mbedtls_net_connect( mbedtls_net_context *ctx, const char *host, const char *port, int proto ); + +/** + * \brief Create a receiving socket on bind_ip:port in the chosen + * protocol. If bind_ip == NULL, all interfaces are bound. + * + * \param ctx Socket to use + * \param bind_ip IP to bind to, can be NULL + * \param port Port number to use + * \param proto Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP + * + * \return 0 if successful, or one of: + * MBEDTLS_ERR_NET_SOCKET_FAILED, + * MBEDTLS_ERR_NET_BIND_FAILED, + * MBEDTLS_ERR_NET_LISTEN_FAILED + * + * \note Regardless of the protocol, opens the sockets and binds it. + * In addition, make the socket listening if protocol is TCP. + */ +int mbedtls_net_bind( mbedtls_net_context *ctx, const char *bind_ip, const char *port, int proto ); + +/** + * \brief Accept a connection from a remote client + * + * \param bind_ctx Relevant socket + * \param client_ctx Will contain the connected client socket + * \param client_ip Will contain the client IP address, can be NULL + * \param buf_size Size of the client_ip buffer + * \param ip_len Will receive the size of the client IP written, + * can be NULL if client_ip is null + * + * \return 0 if successful, or + * MBEDTLS_ERR_NET_ACCEPT_FAILED, or + * MBEDTLS_ERR_NET_BUFFER_TOO_SMALL if buf_size is too small, + * MBEDTLS_ERR_SSL_WANT_READ if bind_fd was set to + * non-blocking and accept() would block. + */ +int mbedtls_net_accept( mbedtls_net_context *bind_ctx, + mbedtls_net_context *client_ctx, + void *client_ip, size_t buf_size, size_t *ip_len ); + +/** + * \brief Check and wait for the context to be ready for read/write + * + * \param ctx Socket to check + * \param rw Bitflag composed of MBEDTLS_NET_POLL_READ and + * MBEDTLS_NET_POLL_WRITE specifying the events + * to wait for: + * - If MBEDTLS_NET_POLL_READ is set, the function + * will return as soon as the net context is available + * for reading. + * - If MBEDTLS_NET_POLL_WRITE is set, the function + * will return as soon as the net context is available + * for writing. + * \param timeout Maximal amount of time to wait before returning, + * in milliseconds. If \c timeout is zero, the + * function returns immediately. If \c timeout is + * -1u, the function blocks potentially indefinitely. + * + * \return Bitmask composed of MBEDTLS_NET_POLL_READ/WRITE + * on success or timeout, or a negative return code otherwise. + */ +int mbedtls_net_poll( mbedtls_net_context *ctx, uint32_t rw, uint32_t timeout ); + +/** + * \brief Set the socket blocking + * + * \param ctx Socket to set + * + * \return 0 if successful, or a non-zero error code + */ +int mbedtls_net_set_block( mbedtls_net_context *ctx ); + +/** + * \brief Set the socket non-blocking + * + * \param ctx Socket to set + * + * \return 0 if successful, or a non-zero error code + */ +int mbedtls_net_set_nonblock( mbedtls_net_context *ctx ); + +/** + * \brief Portable usleep helper + * + * \param usec Amount of microseconds to sleep + * + * \note Real amount of time slept will not be less than + * select()'s timeout granularity (typically, 10ms). + */ +void mbedtls_net_usleep( unsigned long usec ); + +/** + * \brief Read at most 'len' characters. If no error occurs, + * the actual amount read is returned. + * + * \param ctx Socket + * \param buf The buffer to write to + * \param len Maximum length of the buffer + * + * \return the number of bytes received, + * or a non-zero error code; with a non-blocking socket, + * MBEDTLS_ERR_SSL_WANT_READ indicates read() would block. + */ +int mbedtls_net_recv( void *ctx, unsigned char *buf, size_t len ); + +/** + * \brief Write at most 'len' characters. If no error occurs, + * the actual amount read is returned. + * + * \param ctx Socket + * \param buf The buffer to read from + * \param len The length of the buffer + * + * \return the number of bytes sent, + * or a non-zero error code; with a non-blocking socket, + * MBEDTLS_ERR_SSL_WANT_WRITE indicates write() would block. + */ +int mbedtls_net_send( void *ctx, const unsigned char *buf, size_t len ); + +/** + * \brief Read at most 'len' characters, blocking for at most + * 'timeout' seconds. If no error occurs, the actual amount + * read is returned. + * + * \param ctx Socket + * \param buf The buffer to write to + * \param len Maximum length of the buffer + * \param timeout Maximum number of milliseconds to wait for data + * 0 means no timeout (wait forever) + * + * \return the number of bytes received, + * or a non-zero error code: + * MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out, + * MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal. + * + * \note This function will block (until data becomes available or + * timeout is reached) even if the socket is set to + * non-blocking. Handling timeouts with non-blocking reads + * requires a different strategy. + */ +int mbedtls_net_recv_timeout( void *ctx, unsigned char *buf, size_t len, + uint32_t timeout ); + +/** + * \brief Gracefully shutdown the connection and free associated data + * + * \param ctx The context to free + */ +void mbedtls_net_free( mbedtls_net_context *ctx ); + +#ifdef __cplusplus +} +#endif + +#endif /* net_sockets.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/nist_kw.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/nist_kw.h new file mode 100644 index 000000000..3b67b59cd --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/nist_kw.h @@ -0,0 +1,184 @@ +/** + * \file nist_kw.h + * + * \brief This file provides an API for key wrapping (KW) and key wrapping with + * padding (KWP) as defined in NIST SP 800-38F. + * https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-38F.pdf + * + * Key wrapping specifies a deterministic authenticated-encryption mode + * of operation, according to <em>NIST SP 800-38F: Recommendation for + * Block Cipher Modes of Operation: Methods for Key Wrapping</em>. Its + * purpose is to protect cryptographic keys. + * + * Its equivalent is RFC 3394 for KW, and RFC 5649 for KWP. + * https://tools.ietf.org/html/rfc3394 + * https://tools.ietf.org/html/rfc5649 + * + */ +/* + * Copyright (C) 2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_NIST_KW_H +#define MBEDTLS_NIST_KW_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "cipher.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum +{ + MBEDTLS_KW_MODE_KW = 0, + MBEDTLS_KW_MODE_KWP = 1 +} mbedtls_nist_kw_mode_t; + +#if !defined(MBEDTLS_NIST_KW_ALT) +// Regular implementation +// + +/** + * \brief The key wrapping context-type definition. The key wrapping context is passed + * to the APIs called. + * + * \note The definition of this type may change in future library versions. + * Don't make any assumptions on this context! + */ +typedef struct { + mbedtls_cipher_context_t cipher_ctx; /*!< The cipher context used. */ +} mbedtls_nist_kw_context; + +#else /* MBEDTLS_NIST_key wrapping_ALT */ +#include "nist_kw_alt.h" +#endif /* MBEDTLS_NIST_KW_ALT */ + +/** + * \brief This function initializes the specified key wrapping context + * to make references valid and prepare the context + * for mbedtls_nist_kw_setkey() or mbedtls_nist_kw_free(). + * + * \param ctx The key wrapping context to initialize. + * + */ +void mbedtls_nist_kw_init( mbedtls_nist_kw_context *ctx ); + +/** + * \brief This function initializes the key wrapping context set in the + * \p ctx parameter and sets the encryption key. + * + * \param ctx The key wrapping context. + * \param cipher The 128-bit block cipher to use. Only AES is supported. + * \param key The Key Encryption Key (KEK). + * \param keybits The KEK size in bits. This must be acceptable by the cipher. + * \param is_wrap Specify whether the operation within the context is wrapping or unwrapping + * + * \return \c 0 on success. + * \return \c MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA for any invalid input. + * \return \c MBEDTLS_ERR_CIPHER_FEATURE_UNAVAILABLE for 128-bit block ciphers + * which are not supported. + * \return cipher-specific error code on failure of the underlying cipher. + */ +int mbedtls_nist_kw_setkey( mbedtls_nist_kw_context *ctx, + mbedtls_cipher_id_t cipher, + const unsigned char *key, + unsigned int keybits, + const int is_wrap ); + +/** + * \brief This function releases and clears the specified key wrapping context + * and underlying cipher sub-context. + * + * \param ctx The key wrapping context to clear. + */ +void mbedtls_nist_kw_free( mbedtls_nist_kw_context *ctx ); + +/** + * \brief This function encrypts a buffer using key wrapping. + * + * \param ctx The key wrapping context to use for encryption. + * \param mode The key wrapping mode to use (MBEDTLS_KW_MODE_KW or MBEDTLS_KW_MODE_KWP) + * \param input The buffer holding the input data. + * \param in_len The length of the input data in Bytes. + * The input uses units of 8 Bytes called semiblocks. + * <ul><li>For KW mode: a multiple of 8 bytes between 16 and 2^57-8 inclusive. </li> + * <li>For KWP mode: any length between 1 and 2^32-1 inclusive.</li></ul> + * \param[out] output The buffer holding the output data. + * <ul><li>For KW mode: Must be at least 8 bytes larger than \p in_len.</li> + * <li>For KWP mode: Must be at least 8 bytes larger rounded up to a multiple of + * 8 bytes for KWP (15 bytes at most).</li></ul> + * \param[out] out_len The number of bytes written to the output buffer. \c 0 on failure. + * \param[in] out_size The capacity of the output buffer. + * + * \return \c 0 on success. + * \return \c MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA for invalid input length. + * \return cipher-specific error code on failure of the underlying cipher. + */ +int mbedtls_nist_kw_wrap( mbedtls_nist_kw_context *ctx, mbedtls_nist_kw_mode_t mode, + const unsigned char *input, size_t in_len, + unsigned char *output, size_t* out_len, size_t out_size ); + +/** + * \brief This function decrypts a buffer using key wrapping. + * + * \param ctx The key wrapping context to use for decryption. + * \param mode The key wrapping mode to use (MBEDTLS_KW_MODE_KW or MBEDTLS_KW_MODE_KWP) + * \param input The buffer holding the input data. + * \param in_len The length of the input data in Bytes. + * The input uses units of 8 Bytes called semiblocks. + * The input must be a multiple of semiblocks. + * <ul><li>For KW mode: a multiple of 8 bytes between 24 and 2^57 inclusive. </li> + * <li>For KWP mode: a multiple of 8 bytes between 16 and 2^32 inclusive.</li></ul> + * \param[out] output The buffer holding the output data. + * The output buffer's minimal length is 8 bytes shorter than \p in_len. + * \param[out] out_len The number of bytes written to the output buffer. \c 0 on failure. + * For KWP mode, the length could be up to 15 bytes shorter than \p in_len, + * depending on how much padding was added to the data. + * \param[in] out_size The capacity of the output buffer. + * + * \return \c 0 on success. + * \return \c MBEDTLS_ERR_CIPHER_BAD_INPUT_DATA for invalid input length. + * \return \c MBEDTLS_ERR_CIPHER_AUTH_FAILED for verification failure of the ciphertext. + * \return cipher-specific error code on failure of the underlying cipher. + */ +int mbedtls_nist_kw_unwrap( mbedtls_nist_kw_context *ctx, mbedtls_nist_kw_mode_t mode, + const unsigned char *input, size_t in_len, + unsigned char *output, size_t* out_len, size_t out_size); + + +#if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_AES_C) +/** + * \brief The key wrapping checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_nist_kw_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST && MBEDTLS_AES_C */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_NIST_KW_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/oid.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/oid.h new file mode 100644 index 000000000..a879d7df7 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/oid.h @@ -0,0 +1,616 @@ +/** + * \file oid.h + * + * \brief Object Identifier (OID) database + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_OID_H +#define MBEDTLS_OID_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "asn1.h" +#include "pk.h" + +#include <stddef.h> + +#if defined(MBEDTLS_CIPHER_C) +#include "cipher.h" +#endif + +#if defined(MBEDTLS_MD_C) +#include "md.h" +#endif + +#if defined(MBEDTLS_X509_USE_C) || defined(MBEDTLS_X509_CREATE_C) +#include "x509.h" +#endif + +#define MBEDTLS_ERR_OID_NOT_FOUND -0x002E /**< OID is not found. */ +#define MBEDTLS_ERR_OID_BUF_TOO_SMALL -0x000B /**< output buffer is too small */ + +/* + * Top level OID tuples + */ +#define MBEDTLS_OID_ISO_MEMBER_BODIES "\x2a" /* {iso(1) member-body(2)} */ +#define MBEDTLS_OID_ISO_IDENTIFIED_ORG "\x2b" /* {iso(1) identified-organization(3)} */ +#define MBEDTLS_OID_ISO_CCITT_DS "\x55" /* {joint-iso-ccitt(2) ds(5)} */ +#define MBEDTLS_OID_ISO_ITU_COUNTRY "\x60" /* {joint-iso-itu-t(2) country(16)} */ + +/* + * ISO Member bodies OID parts + */ +#define MBEDTLS_OID_COUNTRY_US "\x86\x48" /* {us(840)} */ +#define MBEDTLS_OID_ORG_RSA_DATA_SECURITY "\x86\xf7\x0d" /* {rsadsi(113549)} */ +#define MBEDTLS_OID_RSA_COMPANY MBEDTLS_OID_ISO_MEMBER_BODIES MBEDTLS_OID_COUNTRY_US \ + MBEDTLS_OID_ORG_RSA_DATA_SECURITY /* {iso(1) member-body(2) us(840) rsadsi(113549)} */ +#define MBEDTLS_OID_ORG_ANSI_X9_62 "\xce\x3d" /* ansi-X9-62(10045) */ +#define MBEDTLS_OID_ANSI_X9_62 MBEDTLS_OID_ISO_MEMBER_BODIES MBEDTLS_OID_COUNTRY_US \ + MBEDTLS_OID_ORG_ANSI_X9_62 + +/* + * ISO Identified organization OID parts + */ +#define MBEDTLS_OID_ORG_DOD "\x06" /* {dod(6)} */ +#define MBEDTLS_OID_ORG_OIW "\x0e" +#define MBEDTLS_OID_OIW_SECSIG MBEDTLS_OID_ORG_OIW "\x03" +#define MBEDTLS_OID_OIW_SECSIG_ALG MBEDTLS_OID_OIW_SECSIG "\x02" +#define MBEDTLS_OID_OIW_SECSIG_SHA1 MBEDTLS_OID_OIW_SECSIG_ALG "\x1a" +#define MBEDTLS_OID_ORG_CERTICOM "\x81\x04" /* certicom(132) */ +#define MBEDTLS_OID_CERTICOM MBEDTLS_OID_ISO_IDENTIFIED_ORG MBEDTLS_OID_ORG_CERTICOM +#define MBEDTLS_OID_ORG_TELETRUST "\x24" /* teletrust(36) */ +#define MBEDTLS_OID_TELETRUST MBEDTLS_OID_ISO_IDENTIFIED_ORG MBEDTLS_OID_ORG_TELETRUST + +/* + * ISO ITU OID parts + */ +#define MBEDTLS_OID_ORGANIZATION "\x01" /* {organization(1)} */ +#define MBEDTLS_OID_ISO_ITU_US_ORG MBEDTLS_OID_ISO_ITU_COUNTRY MBEDTLS_OID_COUNTRY_US MBEDTLS_OID_ORGANIZATION /* {joint-iso-itu-t(2) country(16) us(840) organization(1)} */ + +#define MBEDTLS_OID_ORG_GOV "\x65" /* {gov(101)} */ +#define MBEDTLS_OID_GOV MBEDTLS_OID_ISO_ITU_US_ORG MBEDTLS_OID_ORG_GOV /* {joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101)} */ + +#define MBEDTLS_OID_ORG_NETSCAPE "\x86\xF8\x42" /* {netscape(113730)} */ +#define MBEDTLS_OID_NETSCAPE MBEDTLS_OID_ISO_ITU_US_ORG MBEDTLS_OID_ORG_NETSCAPE /* Netscape OID {joint-iso-itu-t(2) country(16) us(840) organization(1) netscape(113730)} */ + +/* ISO arc for standard certificate and CRL extensions */ +#define MBEDTLS_OID_ID_CE MBEDTLS_OID_ISO_CCITT_DS "\x1D" /**< id-ce OBJECT IDENTIFIER ::= {joint-iso-ccitt(2) ds(5) 29} */ + +#define MBEDTLS_OID_NIST_ALG MBEDTLS_OID_GOV "\x03\x04" /** { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistAlgorithm(4) */ + +/** + * Private Internet Extensions + * { iso(1) identified-organization(3) dod(6) internet(1) + * security(5) mechanisms(5) pkix(7) } + */ +#define MBEDTLS_OID_PKIX MBEDTLS_OID_ISO_IDENTIFIED_ORG MBEDTLS_OID_ORG_DOD "\x01\x05\x05\x07" + +/* + * Arc for standard naming attributes + */ +#define MBEDTLS_OID_AT MBEDTLS_OID_ISO_CCITT_DS "\x04" /**< id-at OBJECT IDENTIFIER ::= {joint-iso-ccitt(2) ds(5) 4} */ +#define MBEDTLS_OID_AT_CN MBEDTLS_OID_AT "\x03" /**< id-at-commonName AttributeType:= {id-at 3} */ +#define MBEDTLS_OID_AT_SUR_NAME MBEDTLS_OID_AT "\x04" /**< id-at-surName AttributeType:= {id-at 4} */ +#define MBEDTLS_OID_AT_SERIAL_NUMBER MBEDTLS_OID_AT "\x05" /**< id-at-serialNumber AttributeType:= {id-at 5} */ +#define MBEDTLS_OID_AT_COUNTRY MBEDTLS_OID_AT "\x06" /**< id-at-countryName AttributeType:= {id-at 6} */ +#define MBEDTLS_OID_AT_LOCALITY MBEDTLS_OID_AT "\x07" /**< id-at-locality AttributeType:= {id-at 7} */ +#define MBEDTLS_OID_AT_STATE MBEDTLS_OID_AT "\x08" /**< id-at-state AttributeType:= {id-at 8} */ +#define MBEDTLS_OID_AT_ORGANIZATION MBEDTLS_OID_AT "\x0A" /**< id-at-organizationName AttributeType:= {id-at 10} */ +#define MBEDTLS_OID_AT_ORG_UNIT MBEDTLS_OID_AT "\x0B" /**< id-at-organizationalUnitName AttributeType:= {id-at 11} */ +#define MBEDTLS_OID_AT_TITLE MBEDTLS_OID_AT "\x0C" /**< id-at-title AttributeType:= {id-at 12} */ +#define MBEDTLS_OID_AT_POSTAL_ADDRESS MBEDTLS_OID_AT "\x10" /**< id-at-postalAddress AttributeType:= {id-at 16} */ +#define MBEDTLS_OID_AT_POSTAL_CODE MBEDTLS_OID_AT "\x11" /**< id-at-postalCode AttributeType:= {id-at 17} */ +#define MBEDTLS_OID_AT_GIVEN_NAME MBEDTLS_OID_AT "\x2A" /**< id-at-givenName AttributeType:= {id-at 42} */ +#define MBEDTLS_OID_AT_INITIALS MBEDTLS_OID_AT "\x2B" /**< id-at-initials AttributeType:= {id-at 43} */ +#define MBEDTLS_OID_AT_GENERATION_QUALIFIER MBEDTLS_OID_AT "\x2C" /**< id-at-generationQualifier AttributeType:= {id-at 44} */ +#define MBEDTLS_OID_AT_UNIQUE_IDENTIFIER MBEDTLS_OID_AT "\x2D" /**< id-at-uniqueIdentifier AttributType:= {id-at 45} */ +#define MBEDTLS_OID_AT_DN_QUALIFIER MBEDTLS_OID_AT "\x2E" /**< id-at-dnQualifier AttributeType:= {id-at 46} */ +#define MBEDTLS_OID_AT_PSEUDONYM MBEDTLS_OID_AT "\x41" /**< id-at-pseudonym AttributeType:= {id-at 65} */ + +#define MBEDTLS_OID_DOMAIN_COMPONENT "\x09\x92\x26\x89\x93\xF2\x2C\x64\x01\x19" /** id-domainComponent AttributeType:= {itu-t(0) data(9) pss(2342) ucl(19200300) pilot(100) pilotAttributeType(1) domainComponent(25)} */ + +/* + * OIDs for standard certificate extensions + */ +#define MBEDTLS_OID_AUTHORITY_KEY_IDENTIFIER MBEDTLS_OID_ID_CE "\x23" /**< id-ce-authorityKeyIdentifier OBJECT IDENTIFIER ::= { id-ce 35 } */ +#define MBEDTLS_OID_SUBJECT_KEY_IDENTIFIER MBEDTLS_OID_ID_CE "\x0E" /**< id-ce-subjectKeyIdentifier OBJECT IDENTIFIER ::= { id-ce 14 } */ +#define MBEDTLS_OID_KEY_USAGE MBEDTLS_OID_ID_CE "\x0F" /**< id-ce-keyUsage OBJECT IDENTIFIER ::= { id-ce 15 } */ +#define MBEDTLS_OID_CERTIFICATE_POLICIES MBEDTLS_OID_ID_CE "\x20" /**< id-ce-certificatePolicies OBJECT IDENTIFIER ::= { id-ce 32 } */ +#define MBEDTLS_OID_POLICY_MAPPINGS MBEDTLS_OID_ID_CE "\x21" /**< id-ce-policyMappings OBJECT IDENTIFIER ::= { id-ce 33 } */ +#define MBEDTLS_OID_SUBJECT_ALT_NAME MBEDTLS_OID_ID_CE "\x11" /**< id-ce-subjectAltName OBJECT IDENTIFIER ::= { id-ce 17 } */ +#define MBEDTLS_OID_ISSUER_ALT_NAME MBEDTLS_OID_ID_CE "\x12" /**< id-ce-issuerAltName OBJECT IDENTIFIER ::= { id-ce 18 } */ +#define MBEDTLS_OID_SUBJECT_DIRECTORY_ATTRS MBEDTLS_OID_ID_CE "\x09" /**< id-ce-subjectDirectoryAttributes OBJECT IDENTIFIER ::= { id-ce 9 } */ +#define MBEDTLS_OID_BASIC_CONSTRAINTS MBEDTLS_OID_ID_CE "\x13" /**< id-ce-basicConstraints OBJECT IDENTIFIER ::= { id-ce 19 } */ +#define MBEDTLS_OID_NAME_CONSTRAINTS MBEDTLS_OID_ID_CE "\x1E" /**< id-ce-nameConstraints OBJECT IDENTIFIER ::= { id-ce 30 } */ +#define MBEDTLS_OID_POLICY_CONSTRAINTS MBEDTLS_OID_ID_CE "\x24" /**< id-ce-policyConstraints OBJECT IDENTIFIER ::= { id-ce 36 } */ +#define MBEDTLS_OID_EXTENDED_KEY_USAGE MBEDTLS_OID_ID_CE "\x25" /**< id-ce-extKeyUsage OBJECT IDENTIFIER ::= { id-ce 37 } */ +#define MBEDTLS_OID_CRL_DISTRIBUTION_POINTS MBEDTLS_OID_ID_CE "\x1F" /**< id-ce-cRLDistributionPoints OBJECT IDENTIFIER ::= { id-ce 31 } */ +#define MBEDTLS_OID_INIHIBIT_ANYPOLICY MBEDTLS_OID_ID_CE "\x36" /**< id-ce-inhibitAnyPolicy OBJECT IDENTIFIER ::= { id-ce 54 } */ +#define MBEDTLS_OID_FRESHEST_CRL MBEDTLS_OID_ID_CE "\x2E" /**< id-ce-freshestCRL OBJECT IDENTIFIER ::= { id-ce 46 } */ + +/* + * Netscape certificate extensions + */ +#define MBEDTLS_OID_NS_CERT MBEDTLS_OID_NETSCAPE "\x01" +#define MBEDTLS_OID_NS_CERT_TYPE MBEDTLS_OID_NS_CERT "\x01" +#define MBEDTLS_OID_NS_BASE_URL MBEDTLS_OID_NS_CERT "\x02" +#define MBEDTLS_OID_NS_REVOCATION_URL MBEDTLS_OID_NS_CERT "\x03" +#define MBEDTLS_OID_NS_CA_REVOCATION_URL MBEDTLS_OID_NS_CERT "\x04" +#define MBEDTLS_OID_NS_RENEWAL_URL MBEDTLS_OID_NS_CERT "\x07" +#define MBEDTLS_OID_NS_CA_POLICY_URL MBEDTLS_OID_NS_CERT "\x08" +#define MBEDTLS_OID_NS_SSL_SERVER_NAME MBEDTLS_OID_NS_CERT "\x0C" +#define MBEDTLS_OID_NS_COMMENT MBEDTLS_OID_NS_CERT "\x0D" +#define MBEDTLS_OID_NS_DATA_TYPE MBEDTLS_OID_NETSCAPE "\x02" +#define MBEDTLS_OID_NS_CERT_SEQUENCE MBEDTLS_OID_NS_DATA_TYPE "\x05" + +/* + * OIDs for CRL extensions + */ +#define MBEDTLS_OID_PRIVATE_KEY_USAGE_PERIOD MBEDTLS_OID_ID_CE "\x10" +#define MBEDTLS_OID_CRL_NUMBER MBEDTLS_OID_ID_CE "\x14" /**< id-ce-cRLNumber OBJECT IDENTIFIER ::= { id-ce 20 } */ + +/* + * X.509 v3 Extended key usage OIDs + */ +#define MBEDTLS_OID_ANY_EXTENDED_KEY_USAGE MBEDTLS_OID_EXTENDED_KEY_USAGE "\x00" /**< anyExtendedKeyUsage OBJECT IDENTIFIER ::= { id-ce-extKeyUsage 0 } */ + +#define MBEDTLS_OID_KP MBEDTLS_OID_PKIX "\x03" /**< id-kp OBJECT IDENTIFIER ::= { id-pkix 3 } */ +#define MBEDTLS_OID_SERVER_AUTH MBEDTLS_OID_KP "\x01" /**< id-kp-serverAuth OBJECT IDENTIFIER ::= { id-kp 1 } */ +#define MBEDTLS_OID_CLIENT_AUTH MBEDTLS_OID_KP "\x02" /**< id-kp-clientAuth OBJECT IDENTIFIER ::= { id-kp 2 } */ +#define MBEDTLS_OID_CODE_SIGNING MBEDTLS_OID_KP "\x03" /**< id-kp-codeSigning OBJECT IDENTIFIER ::= { id-kp 3 } */ +#define MBEDTLS_OID_EMAIL_PROTECTION MBEDTLS_OID_KP "\x04" /**< id-kp-emailProtection OBJECT IDENTIFIER ::= { id-kp 4 } */ +#define MBEDTLS_OID_TIME_STAMPING MBEDTLS_OID_KP "\x08" /**< id-kp-timeStamping OBJECT IDENTIFIER ::= { id-kp 8 } */ +#define MBEDTLS_OID_OCSP_SIGNING MBEDTLS_OID_KP "\x09" /**< id-kp-OCSPSigning OBJECT IDENTIFIER ::= { id-kp 9 } */ + +/* + * PKCS definition OIDs + */ + +#define MBEDTLS_OID_PKCS MBEDTLS_OID_RSA_COMPANY "\x01" /**< pkcs OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) 1 } */ +#define MBEDTLS_OID_PKCS1 MBEDTLS_OID_PKCS "\x01" /**< pkcs-1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) 1 } */ +#define MBEDTLS_OID_PKCS5 MBEDTLS_OID_PKCS "\x05" /**< pkcs-5 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) 5 } */ +#define MBEDTLS_OID_PKCS7 MBEDTLS_OID_PKCS "\x07" /**< pkcs-7 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) 7 } */ +#define MBEDTLS_OID_PKCS9 MBEDTLS_OID_PKCS "\x09" /**< pkcs-9 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) 9 } */ +#define MBEDTLS_OID_PKCS12 MBEDTLS_OID_PKCS "\x0c" /**< pkcs-12 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) 12 } */ + +/* + * PKCS#1 OIDs + */ +#define MBEDTLS_OID_PKCS1_RSA MBEDTLS_OID_PKCS1 "\x01" /**< rsaEncryption OBJECT IDENTIFIER ::= { pkcs-1 1 } */ +#define MBEDTLS_OID_PKCS1_MD2 MBEDTLS_OID_PKCS1 "\x02" /**< md2WithRSAEncryption ::= { pkcs-1 2 } */ +#define MBEDTLS_OID_PKCS1_MD4 MBEDTLS_OID_PKCS1 "\x03" /**< md4WithRSAEncryption ::= { pkcs-1 3 } */ +#define MBEDTLS_OID_PKCS1_MD5 MBEDTLS_OID_PKCS1 "\x04" /**< md5WithRSAEncryption ::= { pkcs-1 4 } */ +#define MBEDTLS_OID_PKCS1_SHA1 MBEDTLS_OID_PKCS1 "\x05" /**< sha1WithRSAEncryption ::= { pkcs-1 5 } */ +#define MBEDTLS_OID_PKCS1_SHA224 MBEDTLS_OID_PKCS1 "\x0e" /**< sha224WithRSAEncryption ::= { pkcs-1 14 } */ +#define MBEDTLS_OID_PKCS1_SHA256 MBEDTLS_OID_PKCS1 "\x0b" /**< sha256WithRSAEncryption ::= { pkcs-1 11 } */ +#define MBEDTLS_OID_PKCS1_SHA384 MBEDTLS_OID_PKCS1 "\x0c" /**< sha384WithRSAEncryption ::= { pkcs-1 12 } */ +#define MBEDTLS_OID_PKCS1_SHA512 MBEDTLS_OID_PKCS1 "\x0d" /**< sha512WithRSAEncryption ::= { pkcs-1 13 } */ + +#define MBEDTLS_OID_RSA_SHA_OBS "\x2B\x0E\x03\x02\x1D" + +#define MBEDTLS_OID_PKCS9_EMAIL MBEDTLS_OID_PKCS9 "\x01" /**< emailAddress AttributeType ::= { pkcs-9 1 } */ + +/* RFC 4055 */ +#define MBEDTLS_OID_RSASSA_PSS MBEDTLS_OID_PKCS1 "\x0a" /**< id-RSASSA-PSS ::= { pkcs-1 10 } */ +#define MBEDTLS_OID_MGF1 MBEDTLS_OID_PKCS1 "\x08" /**< id-mgf1 ::= { pkcs-1 8 } */ + +/* + * Digest algorithms + */ +#define MBEDTLS_OID_DIGEST_ALG_MD2 MBEDTLS_OID_RSA_COMPANY "\x02\x02" /**< id-mbedtls_md2 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 2 } */ +#define MBEDTLS_OID_DIGEST_ALG_MD4 MBEDTLS_OID_RSA_COMPANY "\x02\x04" /**< id-mbedtls_md4 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 4 } */ +#define MBEDTLS_OID_DIGEST_ALG_MD5 MBEDTLS_OID_RSA_COMPANY "\x02\x05" /**< id-mbedtls_md5 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 5 } */ +#define MBEDTLS_OID_DIGEST_ALG_SHA1 MBEDTLS_OID_ISO_IDENTIFIED_ORG MBEDTLS_OID_OIW_SECSIG_SHA1 /**< id-mbedtls_sha1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) oiw(14) secsig(3) algorithms(2) 26 } */ +#define MBEDTLS_OID_DIGEST_ALG_SHA224 MBEDTLS_OID_NIST_ALG "\x02\x04" /**< id-sha224 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 4 } */ +#define MBEDTLS_OID_DIGEST_ALG_SHA256 MBEDTLS_OID_NIST_ALG "\x02\x01" /**< id-mbedtls_sha256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 1 } */ + +#define MBEDTLS_OID_DIGEST_ALG_SHA384 MBEDTLS_OID_NIST_ALG "\x02\x02" /**< id-sha384 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 2 } */ + +#define MBEDTLS_OID_DIGEST_ALG_SHA512 MBEDTLS_OID_NIST_ALG "\x02\x03" /**< id-mbedtls_sha512 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 3 } */ + +#define MBEDTLS_OID_HMAC_SHA1 MBEDTLS_OID_RSA_COMPANY "\x02\x07" /**< id-hmacWithSHA1 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 7 } */ + +#define MBEDTLS_OID_HMAC_SHA224 MBEDTLS_OID_RSA_COMPANY "\x02\x08" /**< id-hmacWithSHA224 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 8 } */ + +#define MBEDTLS_OID_HMAC_SHA256 MBEDTLS_OID_RSA_COMPANY "\x02\x09" /**< id-hmacWithSHA256 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 9 } */ + +#define MBEDTLS_OID_HMAC_SHA384 MBEDTLS_OID_RSA_COMPANY "\x02\x0A" /**< id-hmacWithSHA384 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 10 } */ + +#define MBEDTLS_OID_HMAC_SHA512 MBEDTLS_OID_RSA_COMPANY "\x02\x0B" /**< id-hmacWithSHA512 OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840) rsadsi(113549) digestAlgorithm(2) 11 } */ + +/* + * Encryption algorithms + */ +#define MBEDTLS_OID_DES_CBC MBEDTLS_OID_ISO_IDENTIFIED_ORG MBEDTLS_OID_OIW_SECSIG_ALG "\x07" /**< desCBC OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) oiw(14) secsig(3) algorithms(2) 7 } */ +#define MBEDTLS_OID_DES_EDE3_CBC MBEDTLS_OID_RSA_COMPANY "\x03\x07" /**< des-ede3-cbc OBJECT IDENTIFIER ::= { iso(1) member-body(2) -- us(840) rsadsi(113549) encryptionAlgorithm(3) 7 } */ +#define MBEDTLS_OID_AES MBEDTLS_OID_NIST_ALG "\x01" /** aes OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistAlgorithm(4) 1 } */ + +/* + * Key Wrapping algorithms + */ +/* + * RFC 5649 + */ +#define MBEDTLS_OID_AES128_KW MBEDTLS_OID_AES "\x05" /** id-aes128-wrap OBJECT IDENTIFIER ::= { aes 5 } */ +#define MBEDTLS_OID_AES128_KWP MBEDTLS_OID_AES "\x08" /** id-aes128-wrap-pad OBJECT IDENTIFIER ::= { aes 8 } */ +#define MBEDTLS_OID_AES192_KW MBEDTLS_OID_AES "\x19" /** id-aes192-wrap OBJECT IDENTIFIER ::= { aes 25 } */ +#define MBEDTLS_OID_AES192_KWP MBEDTLS_OID_AES "\x1c" /** id-aes192-wrap-pad OBJECT IDENTIFIER ::= { aes 28 } */ +#define MBEDTLS_OID_AES256_KW MBEDTLS_OID_AES "\x2d" /** id-aes256-wrap OBJECT IDENTIFIER ::= { aes 45 } */ +#define MBEDTLS_OID_AES256_KWP MBEDTLS_OID_AES "\x30" /** id-aes256-wrap-pad OBJECT IDENTIFIER ::= { aes 48 } */ +/* + * PKCS#5 OIDs + */ +#define MBEDTLS_OID_PKCS5_PBKDF2 MBEDTLS_OID_PKCS5 "\x0c" /**< id-PBKDF2 OBJECT IDENTIFIER ::= {pkcs-5 12} */ +#define MBEDTLS_OID_PKCS5_PBES2 MBEDTLS_OID_PKCS5 "\x0d" /**< id-PBES2 OBJECT IDENTIFIER ::= {pkcs-5 13} */ +#define MBEDTLS_OID_PKCS5_PBMAC1 MBEDTLS_OID_PKCS5 "\x0e" /**< id-PBMAC1 OBJECT IDENTIFIER ::= {pkcs-5 14} */ + +/* + * PKCS#5 PBES1 algorithms + */ +#define MBEDTLS_OID_PKCS5_PBE_MD2_DES_CBC MBEDTLS_OID_PKCS5 "\x01" /**< pbeWithMD2AndDES-CBC OBJECT IDENTIFIER ::= {pkcs-5 1} */ +#define MBEDTLS_OID_PKCS5_PBE_MD2_RC2_CBC MBEDTLS_OID_PKCS5 "\x04" /**< pbeWithMD2AndRC2-CBC OBJECT IDENTIFIER ::= {pkcs-5 4} */ +#define MBEDTLS_OID_PKCS5_PBE_MD5_DES_CBC MBEDTLS_OID_PKCS5 "\x03" /**< pbeWithMD5AndDES-CBC OBJECT IDENTIFIER ::= {pkcs-5 3} */ +#define MBEDTLS_OID_PKCS5_PBE_MD5_RC2_CBC MBEDTLS_OID_PKCS5 "\x06" /**< pbeWithMD5AndRC2-CBC OBJECT IDENTIFIER ::= {pkcs-5 6} */ +#define MBEDTLS_OID_PKCS5_PBE_SHA1_DES_CBC MBEDTLS_OID_PKCS5 "\x0a" /**< pbeWithSHA1AndDES-CBC OBJECT IDENTIFIER ::= {pkcs-5 10} */ +#define MBEDTLS_OID_PKCS5_PBE_SHA1_RC2_CBC MBEDTLS_OID_PKCS5 "\x0b" /**< pbeWithSHA1AndRC2-CBC OBJECT IDENTIFIER ::= {pkcs-5 11} */ + +/* + * PKCS#7 OIDs + */ +#define MBEDTLS_OID_PKCS7_DATA MBEDTLS_OID_PKCS7 "\x01" /**< Content type is Data OBJECT IDENTIFIER ::= {pkcs-7 1} */ +#define MBEDTLS_OID_PKCS7_SIGNED_DATA MBEDTLS_OID_PKCS7 "\x02" /**< Content type is Signed Data OBJECT IDENTIFIER ::= {pkcs-7 1} */ +#define MBEDTLS_OID_PKCS7_ENVELOPED_DATA MBEDTLS_OID_PKCS7 "\x03" /**< Content type is Enveloped Data OBJECT IDENTIFIER ::= {pkcs-7 1} */ +#define MBEDTLS_OID_PKCS7_SIGNED_AND_ENVELOPED_DATA MBEDTLS_OID_PKCS7 "\x04" /**< Content type is Signed and Enveloped Data OBJECT IDENTIFIER ::= {pkcs-7 1} */ +#define MBEDTLS_OID_PKCS7_DIGESTED_DATA MBEDTLS_OID_PKCS7 "\x05" /**< Content type is Digested Data OBJECT IDENTIFIER ::= {pkcs-7 1} */ +#define MBEDTLS_OID_PKCS7_ENCRYPTED_DATA MBEDTLS_OID_PKCS7 "\x06" /**< Content type is Encrypted Data OBJECT IDENTIFIER ::= {pkcs-7 1} */ + +/* + * PKCS#8 OIDs + */ +#define MBEDTLS_OID_PKCS9_CSR_EXT_REQ MBEDTLS_OID_PKCS9 "\x0e" /**< extensionRequest OBJECT IDENTIFIER ::= {pkcs-9 14} */ + +/* + * PKCS#12 PBE OIDs + */ +#define MBEDTLS_OID_PKCS12_PBE MBEDTLS_OID_PKCS12 "\x01" /**< pkcs-12PbeIds OBJECT IDENTIFIER ::= {pkcs-12 1} */ + +#define MBEDTLS_OID_PKCS12_PBE_SHA1_RC4_128 MBEDTLS_OID_PKCS12_PBE "\x01" /**< pbeWithSHAAnd128BitRC4 OBJECT IDENTIFIER ::= {pkcs-12PbeIds 1} */ +#define MBEDTLS_OID_PKCS12_PBE_SHA1_RC4_40 MBEDTLS_OID_PKCS12_PBE "\x02" /**< pbeWithSHAAnd40BitRC4 OBJECT IDENTIFIER ::= {pkcs-12PbeIds 2} */ +#define MBEDTLS_OID_PKCS12_PBE_SHA1_DES3_EDE_CBC MBEDTLS_OID_PKCS12_PBE "\x03" /**< pbeWithSHAAnd3-KeyTripleDES-CBC OBJECT IDENTIFIER ::= {pkcs-12PbeIds 3} */ +#define MBEDTLS_OID_PKCS12_PBE_SHA1_DES2_EDE_CBC MBEDTLS_OID_PKCS12_PBE "\x04" /**< pbeWithSHAAnd2-KeyTripleDES-CBC OBJECT IDENTIFIER ::= {pkcs-12PbeIds 4} */ +#define MBEDTLS_OID_PKCS12_PBE_SHA1_RC2_128_CBC MBEDTLS_OID_PKCS12_PBE "\x05" /**< pbeWithSHAAnd128BitRC2-CBC OBJECT IDENTIFIER ::= {pkcs-12PbeIds 5} */ +#define MBEDTLS_OID_PKCS12_PBE_SHA1_RC2_40_CBC MBEDTLS_OID_PKCS12_PBE "\x06" /**< pbeWithSHAAnd40BitRC2-CBC OBJECT IDENTIFIER ::= {pkcs-12PbeIds 6} */ + +/* + * EC key algorithms from RFC 5480 + */ + +/* id-ecPublicKey OBJECT IDENTIFIER ::= { + * iso(1) member-body(2) us(840) ansi-X9-62(10045) keyType(2) 1 } */ +#define MBEDTLS_OID_EC_ALG_UNRESTRICTED MBEDTLS_OID_ANSI_X9_62 "\x02\01" + +/* id-ecDH OBJECT IDENTIFIER ::= { + * iso(1) identified-organization(3) certicom(132) + * schemes(1) ecdh(12) } */ +#define MBEDTLS_OID_EC_ALG_ECDH MBEDTLS_OID_CERTICOM "\x01\x0c" + +/* + * ECParameters namedCurve identifiers, from RFC 5480, RFC 5639, and SEC2 + */ + +/* secp192r1 OBJECT IDENTIFIER ::= { + * iso(1) member-body(2) us(840) ansi-X9-62(10045) curves(3) prime(1) 1 } */ +#define MBEDTLS_OID_EC_GRP_SECP192R1 MBEDTLS_OID_ANSI_X9_62 "\x03\x01\x01" + +/* secp224r1 OBJECT IDENTIFIER ::= { + * iso(1) identified-organization(3) certicom(132) curve(0) 33 } */ +#define MBEDTLS_OID_EC_GRP_SECP224R1 MBEDTLS_OID_CERTICOM "\x00\x21" + +/* secp256r1 OBJECT IDENTIFIER ::= { + * iso(1) member-body(2) us(840) ansi-X9-62(10045) curves(3) prime(1) 7 } */ +#define MBEDTLS_OID_EC_GRP_SECP256R1 MBEDTLS_OID_ANSI_X9_62 "\x03\x01\x07" + +/* secp384r1 OBJECT IDENTIFIER ::= { + * iso(1) identified-organization(3) certicom(132) curve(0) 34 } */ +#define MBEDTLS_OID_EC_GRP_SECP384R1 MBEDTLS_OID_CERTICOM "\x00\x22" + +/* secp521r1 OBJECT IDENTIFIER ::= { + * iso(1) identified-organization(3) certicom(132) curve(0) 35 } */ +#define MBEDTLS_OID_EC_GRP_SECP521R1 MBEDTLS_OID_CERTICOM "\x00\x23" + +/* secp192k1 OBJECT IDENTIFIER ::= { + * iso(1) identified-organization(3) certicom(132) curve(0) 31 } */ +#define MBEDTLS_OID_EC_GRP_SECP192K1 MBEDTLS_OID_CERTICOM "\x00\x1f" + +/* secp224k1 OBJECT IDENTIFIER ::= { + * iso(1) identified-organization(3) certicom(132) curve(0) 32 } */ +#define MBEDTLS_OID_EC_GRP_SECP224K1 MBEDTLS_OID_CERTICOM "\x00\x20" + +/* secp256k1 OBJECT IDENTIFIER ::= { + * iso(1) identified-organization(3) certicom(132) curve(0) 10 } */ +#define MBEDTLS_OID_EC_GRP_SECP256K1 MBEDTLS_OID_CERTICOM "\x00\x0a" + +/* RFC 5639 4.1 + * ecStdCurvesAndGeneration OBJECT IDENTIFIER::= {iso(1) + * identified-organization(3) teletrust(36) algorithm(3) signature- + * algorithm(3) ecSign(2) 8} + * ellipticCurve OBJECT IDENTIFIER ::= {ecStdCurvesAndGeneration 1} + * versionOne OBJECT IDENTIFIER ::= {ellipticCurve 1} */ +#define MBEDTLS_OID_EC_BRAINPOOL_V1 MBEDTLS_OID_TELETRUST "\x03\x03\x02\x08\x01\x01" + +/* brainpoolP256r1 OBJECT IDENTIFIER ::= {versionOne 7} */ +#define MBEDTLS_OID_EC_GRP_BP256R1 MBEDTLS_OID_EC_BRAINPOOL_V1 "\x07" + +/* brainpoolP384r1 OBJECT IDENTIFIER ::= {versionOne 11} */ +#define MBEDTLS_OID_EC_GRP_BP384R1 MBEDTLS_OID_EC_BRAINPOOL_V1 "\x0B" + +/* brainpoolP512r1 OBJECT IDENTIFIER ::= {versionOne 13} */ +#define MBEDTLS_OID_EC_GRP_BP512R1 MBEDTLS_OID_EC_BRAINPOOL_V1 "\x0D" + +/* + * SEC1 C.1 + * + * prime-field OBJECT IDENTIFIER ::= { id-fieldType 1 } + * id-fieldType OBJECT IDENTIFIER ::= { ansi-X9-62 fieldType(1)} + */ +#define MBEDTLS_OID_ANSI_X9_62_FIELD_TYPE MBEDTLS_OID_ANSI_X9_62 "\x01" +#define MBEDTLS_OID_ANSI_X9_62_PRIME_FIELD MBEDTLS_OID_ANSI_X9_62_FIELD_TYPE "\x01" + +/* + * ECDSA signature identifiers, from RFC 5480 + */ +#define MBEDTLS_OID_ANSI_X9_62_SIG MBEDTLS_OID_ANSI_X9_62 "\x04" /* signatures(4) */ +#define MBEDTLS_OID_ANSI_X9_62_SIG_SHA2 MBEDTLS_OID_ANSI_X9_62_SIG "\x03" /* ecdsa-with-SHA2(3) */ + +/* ecdsa-with-SHA1 OBJECT IDENTIFIER ::= { + * iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) 1 } */ +#define MBEDTLS_OID_ECDSA_SHA1 MBEDTLS_OID_ANSI_X9_62_SIG "\x01" + +/* ecdsa-with-SHA224 OBJECT IDENTIFIER ::= { + * iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) + * ecdsa-with-SHA2(3) 1 } */ +#define MBEDTLS_OID_ECDSA_SHA224 MBEDTLS_OID_ANSI_X9_62_SIG_SHA2 "\x01" + +/* ecdsa-with-SHA256 OBJECT IDENTIFIER ::= { + * iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) + * ecdsa-with-SHA2(3) 2 } */ +#define MBEDTLS_OID_ECDSA_SHA256 MBEDTLS_OID_ANSI_X9_62_SIG_SHA2 "\x02" + +/* ecdsa-with-SHA384 OBJECT IDENTIFIER ::= { + * iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) + * ecdsa-with-SHA2(3) 3 } */ +#define MBEDTLS_OID_ECDSA_SHA384 MBEDTLS_OID_ANSI_X9_62_SIG_SHA2 "\x03" + +/* ecdsa-with-SHA512 OBJECT IDENTIFIER ::= { + * iso(1) member-body(2) us(840) ansi-X9-62(10045) signatures(4) + * ecdsa-with-SHA2(3) 4 } */ +#define MBEDTLS_OID_ECDSA_SHA512 MBEDTLS_OID_ANSI_X9_62_SIG_SHA2 "\x04" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Base OID descriptor structure + */ +typedef struct mbedtls_oid_descriptor_t +{ + const char *asn1; /*!< OID ASN.1 representation */ + size_t asn1_len; /*!< length of asn1 */ + const char *name; /*!< official name (e.g. from RFC) */ + const char *description; /*!< human friendly description */ +} mbedtls_oid_descriptor_t; + +/** + * \brief Translate an ASN.1 OID into its numeric representation + * (e.g. "\x2A\x86\x48\x86\xF7\x0D" into "1.2.840.113549") + * + * \param buf buffer to put representation in + * \param size size of the buffer + * \param oid OID to translate + * + * \return Length of the string written (excluding final NULL) or + * MBEDTLS_ERR_OID_BUF_TOO_SMALL in case of error + */ +int mbedtls_oid_get_numeric_string( char *buf, size_t size, const mbedtls_asn1_buf *oid ); + +#if defined(MBEDTLS_X509_USE_C) || defined(MBEDTLS_X509_CREATE_C) +/** + * \brief Translate an X.509 extension OID into local values + * + * \param oid OID to use + * \param ext_type place to store the extension type + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_x509_ext_type( const mbedtls_asn1_buf *oid, int *ext_type ); +#endif + +/** + * \brief Translate an X.509 attribute type OID into the short name + * (e.g. the OID for an X520 Common Name into "CN") + * + * \param oid OID to use + * \param short_name place to store the string pointer + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_attr_short_name( const mbedtls_asn1_buf *oid, const char **short_name ); + +/** + * \brief Translate PublicKeyAlgorithm OID into pk_type + * + * \param oid OID to use + * \param pk_alg place to store public key algorithm + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_pk_alg( const mbedtls_asn1_buf *oid, mbedtls_pk_type_t *pk_alg ); + +/** + * \brief Translate pk_type into PublicKeyAlgorithm OID + * + * \param pk_alg Public key type to look for + * \param oid place to store ASN.1 OID string pointer + * \param olen length of the OID + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_oid_by_pk_alg( mbedtls_pk_type_t pk_alg, + const char **oid, size_t *olen ); + +#if defined(MBEDTLS_ECP_C) +/** + * \brief Translate NamedCurve OID into an EC group identifier + * + * \param oid OID to use + * \param grp_id place to store group id + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_ec_grp( const mbedtls_asn1_buf *oid, mbedtls_ecp_group_id *grp_id ); + +/** + * \brief Translate EC group identifier into NamedCurve OID + * + * \param grp_id EC group identifier + * \param oid place to store ASN.1 OID string pointer + * \param olen length of the OID + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_oid_by_ec_grp( mbedtls_ecp_group_id grp_id, + const char **oid, size_t *olen ); +#endif /* MBEDTLS_ECP_C */ + +#if defined(MBEDTLS_MD_C) +/** + * \brief Translate SignatureAlgorithm OID into md_type and pk_type + * + * \param oid OID to use + * \param md_alg place to store message digest algorithm + * \param pk_alg place to store public key algorithm + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_sig_alg( const mbedtls_asn1_buf *oid, + mbedtls_md_type_t *md_alg, mbedtls_pk_type_t *pk_alg ); + +/** + * \brief Translate SignatureAlgorithm OID into description + * + * \param oid OID to use + * \param desc place to store string pointer + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_sig_alg_desc( const mbedtls_asn1_buf *oid, const char **desc ); + +/** + * \brief Translate md_type and pk_type into SignatureAlgorithm OID + * + * \param md_alg message digest algorithm + * \param pk_alg public key algorithm + * \param oid place to store ASN.1 OID string pointer + * \param olen length of the OID + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_oid_by_sig_alg( mbedtls_pk_type_t pk_alg, mbedtls_md_type_t md_alg, + const char **oid, size_t *olen ); + +/** + * \brief Translate hash algorithm OID into md_type + * + * \param oid OID to use + * \param md_alg place to store message digest algorithm + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_md_alg( const mbedtls_asn1_buf *oid, mbedtls_md_type_t *md_alg ); + +/** + * \brief Translate hmac algorithm OID into md_type + * + * \param oid OID to use + * \param md_hmac place to store message hmac algorithm + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_md_hmac( const mbedtls_asn1_buf *oid, mbedtls_md_type_t *md_hmac ); +#endif /* MBEDTLS_MD_C */ + +/** + * \brief Translate Extended Key Usage OID into description + * + * \param oid OID to use + * \param desc place to store string pointer + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_extended_key_usage( const mbedtls_asn1_buf *oid, const char **desc ); + +/** + * \brief Translate md_type into hash algorithm OID + * + * \param md_alg message digest algorithm + * \param oid place to store ASN.1 OID string pointer + * \param olen length of the OID + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_oid_by_md( mbedtls_md_type_t md_alg, const char **oid, size_t *olen ); + +#if defined(MBEDTLS_CIPHER_C) +/** + * \brief Translate encryption algorithm OID into cipher_type + * + * \param oid OID to use + * \param cipher_alg place to store cipher algorithm + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_cipher_alg( const mbedtls_asn1_buf *oid, mbedtls_cipher_type_t *cipher_alg ); +#endif /* MBEDTLS_CIPHER_C */ + +#if defined(MBEDTLS_PKCS12_C) +/** + * \brief Translate PKCS#12 PBE algorithm OID into md_type and + * cipher_type + * + * \param oid OID to use + * \param md_alg place to store message digest algorithm + * \param cipher_alg place to store cipher algorithm + * + * \return 0 if successful, or MBEDTLS_ERR_OID_NOT_FOUND + */ +int mbedtls_oid_get_pkcs12_pbe_alg( const mbedtls_asn1_buf *oid, mbedtls_md_type_t *md_alg, + mbedtls_cipher_type_t *cipher_alg ); +#endif /* MBEDTLS_PKCS12_C */ + +#ifdef __cplusplus +} +#endif + +#endif /* oid.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/padlock.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/padlock.h new file mode 100644 index 000000000..721a5d493 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/padlock.h @@ -0,0 +1,126 @@ +/** + * \file padlock.h + * + * \brief VIA PadLock ACE for HW encryption/decryption supported by some + * processors + * + * \warning These functions are only for internal use by other library + * functions; you must not call them directly. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_PADLOCK_H +#define MBEDTLS_PADLOCK_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "aes.h" + +#define MBEDTLS_ERR_PADLOCK_DATA_MISALIGNED -0x0030 /**< Input data should be aligned. */ + +#if defined(__has_feature) +#if __has_feature(address_sanitizer) +#define MBEDTLS_HAVE_ASAN +#endif +#endif + +/* Some versions of ASan result in errors about not enough registers */ +#if defined(MBEDTLS_HAVE_ASM) && defined(__GNUC__) && defined(__i386__) && \ + !defined(MBEDTLS_HAVE_ASAN) + +#ifndef MBEDTLS_HAVE_X86 +#define MBEDTLS_HAVE_X86 +#endif + +#include <stdint.h> + +#define MBEDTLS_PADLOCK_RNG 0x000C +#define MBEDTLS_PADLOCK_ACE 0x00C0 +#define MBEDTLS_PADLOCK_PHE 0x0C00 +#define MBEDTLS_PADLOCK_PMM 0x3000 + +#define MBEDTLS_PADLOCK_ALIGN16(x) (uint32_t *) (16 + ((int32_t) (x) & ~15)) + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Internal PadLock detection routine + * + * \note This function is only for internal use by other library + * functions; you must not call it directly. + * + * \param feature The feature to detect + * + * \return 1 if CPU has support for the feature, 0 otherwise + */ +int mbedtls_padlock_has_support( int feature ); + +/** + * \brief Internal PadLock AES-ECB block en(de)cryption + * + * \note This function is only for internal use by other library + * functions; you must not call it directly. + * + * \param ctx AES context + * \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT + * \param input 16-byte input block + * \param output 16-byte output block + * + * \return 0 if success, 1 if operation failed + */ +int mbedtls_padlock_xcryptecb( mbedtls_aes_context *ctx, + int mode, + const unsigned char input[16], + unsigned char output[16] ); + +/** + * \brief Internal PadLock AES-CBC buffer en(de)cryption + * + * \note This function is only for internal use by other library + * functions; you must not call it directly. + * + * \param ctx AES context + * \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT + * \param length length of the input data + * \param iv initialization vector (updated after use) + * \param input buffer holding the input data + * \param output buffer holding the output data + * + * \return 0 if success, 1 if operation failed + */ +int mbedtls_padlock_xcryptcbc( mbedtls_aes_context *ctx, + int mode, + size_t length, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); + +#ifdef __cplusplus +} +#endif + +#endif /* HAVE_X86 */ + +#endif /* padlock.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pem.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pem.h new file mode 100644 index 000000000..a29e9ce30 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pem.h @@ -0,0 +1,136 @@ +/** + * \file pem.h + * + * \brief Privacy Enhanced Mail (PEM) decoding + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_PEM_H +#define MBEDTLS_PEM_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> + +/** + * \name PEM Error codes + * These error codes are returned in case of errors reading the + * PEM data. + * \{ + */ +#define MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT -0x1080 /**< No PEM header or footer found. */ +#define MBEDTLS_ERR_PEM_INVALID_DATA -0x1100 /**< PEM string is not as expected. */ +#define MBEDTLS_ERR_PEM_ALLOC_FAILED -0x1180 /**< Failed to allocate memory. */ +#define MBEDTLS_ERR_PEM_INVALID_ENC_IV -0x1200 /**< RSA IV is not in hex-format. */ +#define MBEDTLS_ERR_PEM_UNKNOWN_ENC_ALG -0x1280 /**< Unsupported key encryption algorithm. */ +#define MBEDTLS_ERR_PEM_PASSWORD_REQUIRED -0x1300 /**< Private key password can't be empty. */ +#define MBEDTLS_ERR_PEM_PASSWORD_MISMATCH -0x1380 /**< Given private key password does not allow for correct decryption. */ +#define MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE -0x1400 /**< Unavailable feature, e.g. hashing/encryption combination. */ +#define MBEDTLS_ERR_PEM_BAD_INPUT_DATA -0x1480 /**< Bad input parameters to function. */ +/* \} name */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(MBEDTLS_PEM_PARSE_C) +/** + * \brief PEM context structure + */ +typedef struct mbedtls_pem_context +{ + unsigned char *buf; /*!< buffer for decoded data */ + size_t buflen; /*!< length of the buffer */ + unsigned char *info; /*!< buffer for extra header information */ +} +mbedtls_pem_context; + +/** + * \brief PEM context setup + * + * \param ctx context to be initialized + */ +void mbedtls_pem_init( mbedtls_pem_context *ctx ); + +/** + * \brief Read a buffer for PEM information and store the resulting + * data into the specified context buffers. + * + * \param ctx context to use + * \param header header string to seek and expect + * \param footer footer string to seek and expect + * \param data source data to look in (must be nul-terminated) + * \param pwd password for decryption (can be NULL) + * \param pwdlen length of password + * \param use_len destination for total length used (set after header is + * correctly read, so unless you get + * MBEDTLS_ERR_PEM_BAD_INPUT_DATA or + * MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT, use_len is + * the length to skip) + * + * \note Attempts to check password correctness by verifying if + * the decrypted text starts with an ASN.1 sequence of + * appropriate length + * + * \return 0 on success, or a specific PEM error code + */ +int mbedtls_pem_read_buffer( mbedtls_pem_context *ctx, const char *header, const char *footer, + const unsigned char *data, + const unsigned char *pwd, + size_t pwdlen, size_t *use_len ); + +/** + * \brief PEM context memory freeing + * + * \param ctx context to be freed + */ +void mbedtls_pem_free( mbedtls_pem_context *ctx ); +#endif /* MBEDTLS_PEM_PARSE_C */ + +#if defined(MBEDTLS_PEM_WRITE_C) +/** + * \brief Write a buffer of PEM information from a DER encoded + * buffer. + * + * \param header header string to write + * \param footer footer string to write + * \param der_data DER data to write + * \param der_len length of the DER data + * \param buf buffer to write to + * \param buf_len length of output buffer + * \param olen total length written / required (if buf_len is not enough) + * + * \return 0 on success, or a specific PEM or BASE64 error code. On + * MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL olen is the required + * size. + */ +int mbedtls_pem_write_buffer( const char *header, const char *footer, + const unsigned char *der_data, size_t der_len, + unsigned char *buf, size_t buf_len, size_t *olen ); +#endif /* MBEDTLS_PEM_WRITE_C */ + +#ifdef __cplusplus +} +#endif + +#endif /* pem.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pk.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pk.h new file mode 100644 index 000000000..91950f940 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pk.h @@ -0,0 +1,747 @@ +/** + * \file pk.h + * + * \brief Public Key abstraction layer + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_PK_H +#define MBEDTLS_PK_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "md.h" + +#if defined(MBEDTLS_RSA_C) +#include "rsa.h" +#endif + +#if defined(MBEDTLS_ECP_C) +#include "ecp.h" +#endif + +#if defined(MBEDTLS_ECDSA_C) +#include "ecdsa.h" +#endif + +#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \ + !defined(inline) && !defined(__cplusplus) +#define inline __inline +#endif + +#define MBEDTLS_ERR_PK_ALLOC_FAILED -0x3F80 /**< Memory allocation failed. */ +#define MBEDTLS_ERR_PK_TYPE_MISMATCH -0x3F00 /**< Type mismatch, eg attempt to encrypt with an ECDSA key */ +#define MBEDTLS_ERR_PK_BAD_INPUT_DATA -0x3E80 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_PK_FILE_IO_ERROR -0x3E00 /**< Read/write of file failed. */ +#define MBEDTLS_ERR_PK_KEY_INVALID_VERSION -0x3D80 /**< Unsupported key version */ +#define MBEDTLS_ERR_PK_KEY_INVALID_FORMAT -0x3D00 /**< Invalid key tag or value. */ +#define MBEDTLS_ERR_PK_UNKNOWN_PK_ALG -0x3C80 /**< Key algorithm is unsupported (only RSA and EC are supported). */ +#define MBEDTLS_ERR_PK_PASSWORD_REQUIRED -0x3C00 /**< Private key password can't be empty. */ +#define MBEDTLS_ERR_PK_PASSWORD_MISMATCH -0x3B80 /**< Given private key password does not allow for correct decryption. */ +#define MBEDTLS_ERR_PK_INVALID_PUBKEY -0x3B00 /**< The pubkey tag or value is invalid (only RSA and EC are supported). */ +#define MBEDTLS_ERR_PK_INVALID_ALG -0x3A80 /**< The algorithm tag or value is invalid. */ +#define MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE -0x3A00 /**< Elliptic curve is unsupported (only NIST curves are supported). */ +#define MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE -0x3980 /**< Unavailable feature, e.g. RSA disabled for RSA key. */ +#define MBEDTLS_ERR_PK_SIG_LEN_MISMATCH -0x3900 /**< The buffer contains a valid signature followed by more data. */ + +/* MBEDTLS_ERR_PK_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_PK_HW_ACCEL_FAILED -0x3880 /**< PK hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Public key types + */ +typedef enum { + MBEDTLS_PK_NONE=0, + MBEDTLS_PK_RSA, + MBEDTLS_PK_ECKEY, + MBEDTLS_PK_ECKEY_DH, + MBEDTLS_PK_ECDSA, + MBEDTLS_PK_RSA_ALT, + MBEDTLS_PK_RSASSA_PSS, +} mbedtls_pk_type_t; + +/** + * \brief Options for RSASSA-PSS signature verification. + * See \c mbedtls_rsa_rsassa_pss_verify_ext() + */ +typedef struct mbedtls_pk_rsassa_pss_options +{ + mbedtls_md_type_t mgf1_hash_id; + int expected_salt_len; + +} mbedtls_pk_rsassa_pss_options; + +/** + * \brief Types for interfacing with the debug module + */ +typedef enum +{ + MBEDTLS_PK_DEBUG_NONE = 0, + MBEDTLS_PK_DEBUG_MPI, + MBEDTLS_PK_DEBUG_ECP, +} mbedtls_pk_debug_type; + +/** + * \brief Item to send to the debug module + */ +typedef struct mbedtls_pk_debug_item +{ + mbedtls_pk_debug_type type; + const char *name; + void *value; +} mbedtls_pk_debug_item; + +/** Maximum number of item send for debugging, plus 1 */ +#define MBEDTLS_PK_DEBUG_MAX_ITEMS 3 + +/** + * \brief Public key information and operations + */ +typedef struct mbedtls_pk_info_t mbedtls_pk_info_t; + +/** + * \brief Public key container + */ +typedef struct mbedtls_pk_context +{ + const mbedtls_pk_info_t * pk_info; /**< Public key information */ + void * pk_ctx; /**< Underlying public key context */ +} mbedtls_pk_context; + +#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE) +/** + * \brief Context for resuming operations + */ +typedef struct +{ + const mbedtls_pk_info_t * pk_info; /**< Public key information */ + void * rs_ctx; /**< Underlying restart context */ +} mbedtls_pk_restart_ctx; +#else /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */ +/* Now we can declare functions that take a pointer to that */ +typedef void mbedtls_pk_restart_ctx; +#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */ + +#if defined(MBEDTLS_RSA_C) +/** + * Quick access to an RSA context inside a PK context. + * + * \warning You must make sure the PK context actually holds an RSA context + * before using this function! + */ +static inline mbedtls_rsa_context *mbedtls_pk_rsa( const mbedtls_pk_context pk ) +{ + return( (mbedtls_rsa_context *) (pk).pk_ctx ); +} +#endif /* MBEDTLS_RSA_C */ + +#if defined(MBEDTLS_ECP_C) +/** + * Quick access to an EC context inside a PK context. + * + * \warning You must make sure the PK context actually holds an EC context + * before using this function! + */ +static inline mbedtls_ecp_keypair *mbedtls_pk_ec( const mbedtls_pk_context pk ) +{ + return( (mbedtls_ecp_keypair *) (pk).pk_ctx ); +} +#endif /* MBEDTLS_ECP_C */ + +#if defined(MBEDTLS_PK_RSA_ALT_SUPPORT) +/** + * \brief Types for RSA-alt abstraction + */ +typedef int (*mbedtls_pk_rsa_alt_decrypt_func)( void *ctx, int mode, size_t *olen, + const unsigned char *input, unsigned char *output, + size_t output_max_len ); +typedef int (*mbedtls_pk_rsa_alt_sign_func)( void *ctx, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, + int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, + const unsigned char *hash, unsigned char *sig ); +typedef size_t (*mbedtls_pk_rsa_alt_key_len_func)( void *ctx ); +#endif /* MBEDTLS_PK_RSA_ALT_SUPPORT */ + +/** + * \brief Return information associated with the given PK type + * + * \param pk_type PK type to search for. + * + * \return The PK info associated with the type or NULL if not found. + */ +const mbedtls_pk_info_t *mbedtls_pk_info_from_type( mbedtls_pk_type_t pk_type ); + +/** + * \brief Initialize a #mbedtls_pk_context (as NONE). + * + * \param ctx The context to initialize. + * This must not be \c NULL. + */ +void mbedtls_pk_init( mbedtls_pk_context *ctx ); + +/** + * \brief Free the components of a #mbedtls_pk_context. + * + * \param ctx The context to clear. It must have been initialized. + * If this is \c NULL, this function does nothing. + */ +void mbedtls_pk_free( mbedtls_pk_context *ctx ); + +#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE) +/** + * \brief Initialize a restart context + * + * \param ctx The context to initialize. + * This must not be \c NULL. + */ +void mbedtls_pk_restart_init( mbedtls_pk_restart_ctx *ctx ); + +/** + * \brief Free the components of a restart context + * + * \param ctx The context to clear. It must have been initialized. + * If this is \c NULL, this function does nothing. + */ +void mbedtls_pk_restart_free( mbedtls_pk_restart_ctx *ctx ); +#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */ + +/** + * \brief Initialize a PK context with the information given + * and allocates the type-specific PK subcontext. + * + * \param ctx Context to initialize. It must not have been set + * up yet (type #MBEDTLS_PK_NONE). + * \param info Information to use + * + * \return 0 on success, + * MBEDTLS_ERR_PK_BAD_INPUT_DATA on invalid input, + * MBEDTLS_ERR_PK_ALLOC_FAILED on allocation failure. + * + * \note For contexts holding an RSA-alt key, use + * \c mbedtls_pk_setup_rsa_alt() instead. + */ +int mbedtls_pk_setup( mbedtls_pk_context *ctx, const mbedtls_pk_info_t *info ); + +#if defined(MBEDTLS_PK_RSA_ALT_SUPPORT) +/** + * \brief Initialize an RSA-alt context + * + * \param ctx Context to initialize. It must not have been set + * up yet (type #MBEDTLS_PK_NONE). + * \param key RSA key pointer + * \param decrypt_func Decryption function + * \param sign_func Signing function + * \param key_len_func Function returning key length in bytes + * + * \return 0 on success, or MBEDTLS_ERR_PK_BAD_INPUT_DATA if the + * context wasn't already initialized as RSA_ALT. + * + * \note This function replaces \c mbedtls_pk_setup() for RSA-alt. + */ +int mbedtls_pk_setup_rsa_alt( mbedtls_pk_context *ctx, void * key, + mbedtls_pk_rsa_alt_decrypt_func decrypt_func, + mbedtls_pk_rsa_alt_sign_func sign_func, + mbedtls_pk_rsa_alt_key_len_func key_len_func ); +#endif /* MBEDTLS_PK_RSA_ALT_SUPPORT */ + +/** + * \brief Get the size in bits of the underlying key + * + * \param ctx The context to query. It must have been initialized. + * + * \return Key size in bits, or 0 on error + */ +size_t mbedtls_pk_get_bitlen( const mbedtls_pk_context *ctx ); + +/** + * \brief Get the length in bytes of the underlying key + * + * \param ctx The context to query. It must have been initialized. + * + * \return Key length in bytes, or 0 on error + */ +static inline size_t mbedtls_pk_get_len( const mbedtls_pk_context *ctx ) +{ + return( ( mbedtls_pk_get_bitlen( ctx ) + 7 ) / 8 ); +} + +/** + * \brief Tell if a context can do the operation given by type + * + * \param ctx The context to query. It must have been initialized. + * \param type The desired type. + * + * \return 1 if the context can do operations on the given type. + * \return 0 if the context cannot do the operations on the given + * type. This is always the case for a context that has + * been initialized but not set up, or that has been + * cleared with mbedtls_pk_free(). + */ +int mbedtls_pk_can_do( const mbedtls_pk_context *ctx, mbedtls_pk_type_t type ); + +/** + * \brief Verify signature (including padding if relevant). + * + * \param ctx The PK context to use. It must have been set up. + * \param md_alg Hash algorithm used (see notes) + * \param hash Hash of the message to sign + * \param hash_len Hash length or 0 (see notes) + * \param sig Signature to verify + * \param sig_len Signature length + * + * \return 0 on success (signature is valid), + * #MBEDTLS_ERR_PK_SIG_LEN_MISMATCH if there is a valid + * signature in sig but its length is less than \p siglen, + * or a specific error code. + * + * \note For RSA keys, the default padding type is PKCS#1 v1.5. + * Use \c mbedtls_pk_verify_ext( MBEDTLS_PK_RSASSA_PSS, ... ) + * to verify RSASSA_PSS signatures. + * + * \note If hash_len is 0, then the length associated with md_alg + * is used instead, or an error returned if it is invalid. + * + * \note md_alg may be MBEDTLS_MD_NONE, only if hash_len != 0 + */ +int mbedtls_pk_verify( mbedtls_pk_context *ctx, mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + const unsigned char *sig, size_t sig_len ); + +/** + * \brief Restartable version of \c mbedtls_pk_verify() + * + * \note Performs the same job as \c mbedtls_pk_verify(), but can + * return early and restart according to the limit set with + * \c mbedtls_ecp_set_max_ops() to reduce blocking for ECC + * operations. For RSA, same as \c mbedtls_pk_verify(). + * + * \param ctx The PK context to use. It must have been set up. + * \param md_alg Hash algorithm used (see notes) + * \param hash Hash of the message to sign + * \param hash_len Hash length or 0 (see notes) + * \param sig Signature to verify + * \param sig_len Signature length + * \param rs_ctx Restart context (NULL to disable restart) + * + * \return See \c mbedtls_pk_verify(), or + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + */ +int mbedtls_pk_verify_restartable( mbedtls_pk_context *ctx, + mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + const unsigned char *sig, size_t sig_len, + mbedtls_pk_restart_ctx *rs_ctx ); + +/** + * \brief Verify signature, with options. + * (Includes verification of the padding depending on type.) + * + * \param type Signature type (inc. possible padding type) to verify + * \param options Pointer to type-specific options, or NULL + * \param ctx The PK context to use. It must have been set up. + * \param md_alg Hash algorithm used (see notes) + * \param hash Hash of the message to sign + * \param hash_len Hash length or 0 (see notes) + * \param sig Signature to verify + * \param sig_len Signature length + * + * \return 0 on success (signature is valid), + * #MBEDTLS_ERR_PK_TYPE_MISMATCH if the PK context can't be + * used for this type of signatures, + * #MBEDTLS_ERR_PK_SIG_LEN_MISMATCH if there is a valid + * signature in sig but its length is less than \p siglen, + * or a specific error code. + * + * \note If hash_len is 0, then the length associated with md_alg + * is used instead, or an error returned if it is invalid. + * + * \note md_alg may be MBEDTLS_MD_NONE, only if hash_len != 0 + * + * \note If type is MBEDTLS_PK_RSASSA_PSS, then options must point + * to a mbedtls_pk_rsassa_pss_options structure, + * otherwise it must be NULL. + */ +int mbedtls_pk_verify_ext( mbedtls_pk_type_t type, const void *options, + mbedtls_pk_context *ctx, mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + const unsigned char *sig, size_t sig_len ); + +/** + * \brief Make signature, including padding if relevant. + * + * \param ctx The PK context to use. It must have been set up + * with a private key. + * \param md_alg Hash algorithm used (see notes) + * \param hash Hash of the message to sign + * \param hash_len Hash length or 0 (see notes) + * \param sig Place to write the signature + * \param sig_len Number of bytes written + * \param f_rng RNG function + * \param p_rng RNG parameter + * + * \return 0 on success, or a specific error code. + * + * \note For RSA keys, the default padding type is PKCS#1 v1.5. + * There is no interface in the PK module to make RSASSA-PSS + * signatures yet. + * + * \note If hash_len is 0, then the length associated with md_alg + * is used instead, or an error returned if it is invalid. + * + * \note For RSA, md_alg may be MBEDTLS_MD_NONE if hash_len != 0. + * For ECDSA, md_alg may never be MBEDTLS_MD_NONE. + */ +int mbedtls_pk_sign( mbedtls_pk_context *ctx, mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + unsigned char *sig, size_t *sig_len, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); + +/** + * \brief Restartable version of \c mbedtls_pk_sign() + * + * \note Performs the same job as \c mbedtls_pk_sign(), but can + * return early and restart according to the limit set with + * \c mbedtls_ecp_set_max_ops() to reduce blocking for ECC + * operations. For RSA, same as \c mbedtls_pk_sign(). + * + * \param ctx The PK context to use. It must have been set up + * with a private key. + * \param md_alg Hash algorithm used (see notes) + * \param hash Hash of the message to sign + * \param hash_len Hash length or 0 (see notes) + * \param sig Place to write the signature + * \param sig_len Number of bytes written + * \param f_rng RNG function + * \param p_rng RNG parameter + * \param rs_ctx Restart context (NULL to disable restart) + * + * \return See \c mbedtls_pk_sign(), or + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + */ +int mbedtls_pk_sign_restartable( mbedtls_pk_context *ctx, + mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + unsigned char *sig, size_t *sig_len, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, + mbedtls_pk_restart_ctx *rs_ctx ); + +/** + * \brief Decrypt message (including padding if relevant). + * + * \param ctx The PK context to use. It must have been set up + * with a private key. + * \param input Input to decrypt + * \param ilen Input size + * \param output Decrypted output + * \param olen Decrypted message length + * \param osize Size of the output buffer + * \param f_rng RNG function + * \param p_rng RNG parameter + * + * \note For RSA keys, the default padding type is PKCS#1 v1.5. + * + * \return 0 on success, or a specific error code. + */ +int mbedtls_pk_decrypt( mbedtls_pk_context *ctx, + const unsigned char *input, size_t ilen, + unsigned char *output, size_t *olen, size_t osize, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); + +/** + * \brief Encrypt message (including padding if relevant). + * + * \param ctx The PK context to use. It must have been set up. + * \param input Message to encrypt + * \param ilen Message size + * \param output Encrypted output + * \param olen Encrypted output length + * \param osize Size of the output buffer + * \param f_rng RNG function + * \param p_rng RNG parameter + * + * \note For RSA keys, the default padding type is PKCS#1 v1.5. + * + * \return 0 on success, or a specific error code. + */ +int mbedtls_pk_encrypt( mbedtls_pk_context *ctx, + const unsigned char *input, size_t ilen, + unsigned char *output, size_t *olen, size_t osize, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); + +/** + * \brief Check if a public-private pair of keys matches. + * + * \param pub Context holding a public key. + * \param prv Context holding a private (and public) key. + * + * \return 0 on success or MBEDTLS_ERR_PK_BAD_INPUT_DATA + */ +int mbedtls_pk_check_pair( const mbedtls_pk_context *pub, const mbedtls_pk_context *prv ); + +/** + * \brief Export debug information + * + * \param ctx The PK context to use. It must have been initialized. + * \param items Place to write debug items + * + * \return 0 on success or MBEDTLS_ERR_PK_BAD_INPUT_DATA + */ +int mbedtls_pk_debug( const mbedtls_pk_context *ctx, mbedtls_pk_debug_item *items ); + +/** + * \brief Access the type name + * + * \param ctx The PK context to use. It must have been initialized. + * + * \return Type name on success, or "invalid PK" + */ +const char * mbedtls_pk_get_name( const mbedtls_pk_context *ctx ); + +/** + * \brief Get the key type + * + * \param ctx The PK context to use. It must have been initialized. + * + * \return Type on success. + * \return #MBEDTLS_PK_NONE for a context that has not been set up. + */ +mbedtls_pk_type_t mbedtls_pk_get_type( const mbedtls_pk_context *ctx ); + +#if defined(MBEDTLS_PK_PARSE_C) +/** \ingroup pk_module */ +/** + * \brief Parse a private key in PEM or DER format + * + * \param ctx The PK context to fill. It must have been initialized + * but not set up. + * \param key Input buffer to parse. + * The buffer must contain the input exactly, with no + * extra trailing material. For PEM, the buffer must + * contain a null-terminated string. + * \param keylen Size of \b key in bytes. + * For PEM data, this includes the terminating null byte, + * so \p keylen must be equal to `strlen(key) + 1`. + * \param pwd Optional password for decryption. + * Pass \c NULL if expecting a non-encrypted key. + * Pass a string of \p pwdlen bytes if expecting an encrypted + * key; a non-encrypted key will also be accepted. + * The empty password is not supported. + * \param pwdlen Size of the password in bytes. + * Ignored if \p pwd is \c NULL. + * + * \note On entry, ctx must be empty, either freshly initialised + * with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a + * specific key type, check the result with mbedtls_pk_can_do(). + * + * \note The key is also checked for correctness. + * + * \return 0 if successful, or a specific PK or PEM error code + */ +int mbedtls_pk_parse_key( mbedtls_pk_context *ctx, + const unsigned char *key, size_t keylen, + const unsigned char *pwd, size_t pwdlen ); + +/** \ingroup pk_module */ +/** + * \brief Parse a public key in PEM or DER format + * + * \param ctx The PK context to fill. It must have been initialized + * but not set up. + * \param key Input buffer to parse. + * The buffer must contain the input exactly, with no + * extra trailing material. For PEM, the buffer must + * contain a null-terminated string. + * \param keylen Size of \b key in bytes. + * For PEM data, this includes the terminating null byte, + * so \p keylen must be equal to `strlen(key) + 1`. + * + * \note On entry, ctx must be empty, either freshly initialised + * with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a + * specific key type, check the result with mbedtls_pk_can_do(). + * + * \note The key is also checked for correctness. + * + * \return 0 if successful, or a specific PK or PEM error code + */ +int mbedtls_pk_parse_public_key( mbedtls_pk_context *ctx, + const unsigned char *key, size_t keylen ); + +#if defined(MBEDTLS_FS_IO) +/** \ingroup pk_module */ +/** + * \brief Load and parse a private key + * + * \param ctx The PK context to fill. It must have been initialized + * but not set up. + * \param path filename to read the private key from + * \param password Optional password to decrypt the file. + * Pass \c NULL if expecting a non-encrypted key. + * Pass a null-terminated string if expecting an encrypted + * key; a non-encrypted key will also be accepted. + * The empty password is not supported. + * + * \note On entry, ctx must be empty, either freshly initialised + * with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a + * specific key type, check the result with mbedtls_pk_can_do(). + * + * \note The key is also checked for correctness. + * + * \return 0 if successful, or a specific PK or PEM error code + */ +int mbedtls_pk_parse_keyfile( mbedtls_pk_context *ctx, + const char *path, const char *password ); + +/** \ingroup pk_module */ +/** + * \brief Load and parse a public key + * + * \param ctx The PK context to fill. It must have been initialized + * but not set up. + * \param path filename to read the public key from + * + * \note On entry, ctx must be empty, either freshly initialised + * with mbedtls_pk_init() or reset with mbedtls_pk_free(). If + * you need a specific key type, check the result with + * mbedtls_pk_can_do(). + * + * \note The key is also checked for correctness. + * + * \return 0 if successful, or a specific PK or PEM error code + */ +int mbedtls_pk_parse_public_keyfile( mbedtls_pk_context *ctx, const char *path ); +#endif /* MBEDTLS_FS_IO */ +#endif /* MBEDTLS_PK_PARSE_C */ + +#if defined(MBEDTLS_PK_WRITE_C) +/** + * \brief Write a private key to a PKCS#1 or SEC1 DER structure + * Note: data is written at the end of the buffer! Use the + * return value to determine where you should start + * using the buffer + * + * \param ctx PK context which must contain a valid private key. + * \param buf buffer to write to + * \param size size of the buffer + * + * \return length of data written if successful, or a specific + * error code + */ +int mbedtls_pk_write_key_der( mbedtls_pk_context *ctx, unsigned char *buf, size_t size ); + +/** + * \brief Write a public key to a SubjectPublicKeyInfo DER structure + * Note: data is written at the end of the buffer! Use the + * return value to determine where you should start + * using the buffer + * + * \param ctx PK context which must contain a valid public or private key. + * \param buf buffer to write to + * \param size size of the buffer + * + * \return length of data written if successful, or a specific + * error code + */ +int mbedtls_pk_write_pubkey_der( mbedtls_pk_context *ctx, unsigned char *buf, size_t size ); + +#if defined(MBEDTLS_PEM_WRITE_C) +/** + * \brief Write a public key to a PEM string + * + * \param ctx PK context which must contain a valid public or private key. + * \param buf Buffer to write to. The output includes a + * terminating null byte. + * \param size Size of the buffer in bytes. + * + * \return 0 if successful, or a specific error code + */ +int mbedtls_pk_write_pubkey_pem( mbedtls_pk_context *ctx, unsigned char *buf, size_t size ); + +/** + * \brief Write a private key to a PKCS#1 or SEC1 PEM string + * + * \param ctx PK context which must contain a valid private key. + * \param buf Buffer to write to. The output includes a + * terminating null byte. + * \param size Size of the buffer in bytes. + * + * \return 0 if successful, or a specific error code + */ +int mbedtls_pk_write_key_pem( mbedtls_pk_context *ctx, unsigned char *buf, size_t size ); +#endif /* MBEDTLS_PEM_WRITE_C */ +#endif /* MBEDTLS_PK_WRITE_C */ + +/* + * WARNING: Low-level functions. You probably do not want to use these unless + * you are certain you do ;) + */ + +#if defined(MBEDTLS_PK_PARSE_C) +/** + * \brief Parse a SubjectPublicKeyInfo DER structure + * + * \param p the position in the ASN.1 data + * \param end end of the buffer + * \param pk The PK context to fill. It must have been initialized + * but not set up. + * + * \return 0 if successful, or a specific PK error code + */ +int mbedtls_pk_parse_subpubkey( unsigned char **p, const unsigned char *end, + mbedtls_pk_context *pk ); +#endif /* MBEDTLS_PK_PARSE_C */ + +#if defined(MBEDTLS_PK_WRITE_C) +/** + * \brief Write a subjectPublicKey to ASN.1 data + * Note: function works backwards in data buffer + * + * \param p reference to current position pointer + * \param start start of the buffer (for bounds-checking) + * \param key PK context which must contain a valid public or private key. + * + * \return the length written or a negative error code + */ +int mbedtls_pk_write_pubkey( unsigned char **p, unsigned char *start, + const mbedtls_pk_context *key ); +#endif /* MBEDTLS_PK_WRITE_C */ + +/* + * Internal module functions. You probably do not want to use these unless you + * know you do. + */ +#if defined(MBEDTLS_FS_IO) +int mbedtls_pk_load_file( const char *path, unsigned char **buf, size_t *n ); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_PK_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pk_internal.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pk_internal.h new file mode 100644 index 000000000..48b7a5f7b --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pk_internal.h @@ -0,0 +1,138 @@ +/** + * \file pk_internal.h + * + * \brief Public Key abstraction layer: wrapper functions + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_PK_WRAP_H +#define MBEDTLS_PK_WRAP_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "pk.h" + +struct mbedtls_pk_info_t +{ + /** Public key type */ + mbedtls_pk_type_t type; + + /** Type name */ + const char *name; + + /** Get key size in bits */ + size_t (*get_bitlen)( const void * ); + + /** Tell if the context implements this type (e.g. ECKEY can do ECDSA) */ + int (*can_do)( mbedtls_pk_type_t type ); + + /** Verify signature */ + int (*verify_func)( void *ctx, mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + const unsigned char *sig, size_t sig_len ); + + /** Make signature */ + int (*sign_func)( void *ctx, mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + unsigned char *sig, size_t *sig_len, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE) + /** Verify signature (restartable) */ + int (*verify_rs_func)( void *ctx, mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + const unsigned char *sig, size_t sig_len, + void *rs_ctx ); + + /** Make signature (restartable) */ + int (*sign_rs_func)( void *ctx, mbedtls_md_type_t md_alg, + const unsigned char *hash, size_t hash_len, + unsigned char *sig, size_t *sig_len, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, void *rs_ctx ); +#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */ + + /** Decrypt message */ + int (*decrypt_func)( void *ctx, const unsigned char *input, size_t ilen, + unsigned char *output, size_t *olen, size_t osize, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + + /** Encrypt message */ + int (*encrypt_func)( void *ctx, const unsigned char *input, size_t ilen, + unsigned char *output, size_t *olen, size_t osize, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + + /** Check public-private key pair */ + int (*check_pair_func)( const void *pub, const void *prv ); + + /** Allocate a new context */ + void * (*ctx_alloc_func)( void ); + + /** Free the given context */ + void (*ctx_free_func)( void *ctx ); + +#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE) + /** Allocate the restart context */ + void * (*rs_alloc_func)( void ); + + /** Free the restart context */ + void (*rs_free_func)( void *rs_ctx ); +#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */ + + /** Interface with the debug module */ + void (*debug_func)( const void *ctx, mbedtls_pk_debug_item *items ); + +}; +#if defined(MBEDTLS_PK_RSA_ALT_SUPPORT) +/* Container for RSA-alt */ +typedef struct +{ + void *key; + mbedtls_pk_rsa_alt_decrypt_func decrypt_func; + mbedtls_pk_rsa_alt_sign_func sign_func; + mbedtls_pk_rsa_alt_key_len_func key_len_func; +} mbedtls_rsa_alt_context; +#endif + +#if defined(MBEDTLS_RSA_C) +extern const mbedtls_pk_info_t mbedtls_rsa_info; +#endif + +#if defined(MBEDTLS_ECP_C) +extern const mbedtls_pk_info_t mbedtls_eckey_info; +extern const mbedtls_pk_info_t mbedtls_eckeydh_info; +#endif + +#if defined(MBEDTLS_ECDSA_C) +extern const mbedtls_pk_info_t mbedtls_ecdsa_info; +#endif + +#if defined(MBEDTLS_PK_RSA_ALT_SUPPORT) +extern const mbedtls_pk_info_t mbedtls_rsa_alt_info; +#endif + +#endif /* MBEDTLS_PK_WRAP_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs11.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs11.h new file mode 100644 index 000000000..02427ddc1 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs11.h @@ -0,0 +1,175 @@ +/** + * \file pkcs11.h + * + * \brief Wrapper for PKCS#11 library libpkcs11-helper + * + * \author Adriaan de Jong <dejong@fox-it.com> + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_PKCS11_H +#define MBEDTLS_PKCS11_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#if defined(MBEDTLS_PKCS11_C) + +#include "x509_crt.h" + +#include <pkcs11-helper-1.0/pkcs11h-certificate.h> + +#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \ + !defined(inline) && !defined(__cplusplus) +#define inline __inline +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Context for PKCS #11 private keys. + */ +typedef struct mbedtls_pkcs11_context +{ + pkcs11h_certificate_t pkcs11h_cert; + int len; +} mbedtls_pkcs11_context; + +/** + * Initialize a mbedtls_pkcs11_context. + * (Just making memory references valid.) + */ +void mbedtls_pkcs11_init( mbedtls_pkcs11_context *ctx ); + +/** + * Fill in a mbed TLS certificate, based on the given PKCS11 helper certificate. + * + * \param cert X.509 certificate to fill + * \param pkcs11h_cert PKCS #11 helper certificate + * + * \return 0 on success. + */ +int mbedtls_pkcs11_x509_cert_bind( mbedtls_x509_crt *cert, pkcs11h_certificate_t pkcs11h_cert ); + +/** + * Set up a mbedtls_pkcs11_context storing the given certificate. Note that the + * mbedtls_pkcs11_context will take over control of the certificate, freeing it when + * done. + * + * \param priv_key Private key structure to fill. + * \param pkcs11_cert PKCS #11 helper certificate + * + * \return 0 on success + */ +int mbedtls_pkcs11_priv_key_bind( mbedtls_pkcs11_context *priv_key, + pkcs11h_certificate_t pkcs11_cert ); + +/** + * Free the contents of the given private key context. Note that the structure + * itself is not freed. + * + * \param priv_key Private key structure to cleanup + */ +void mbedtls_pkcs11_priv_key_free( mbedtls_pkcs11_context *priv_key ); + +/** + * \brief Do an RSA private key decrypt, then remove the message + * padding + * + * \param ctx PKCS #11 context + * \param mode must be MBEDTLS_RSA_PRIVATE, for compatibility with rsa.c's signature + * \param input buffer holding the encrypted data + * \param output buffer that will hold the plaintext + * \param olen will contain the plaintext length + * \param output_max_len maximum length of the output buffer + * + * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise + * an error is thrown. + */ +int mbedtls_pkcs11_decrypt( mbedtls_pkcs11_context *ctx, + int mode, size_t *olen, + const unsigned char *input, + unsigned char *output, + size_t output_max_len ); + +/** + * \brief Do a private RSA to sign a message digest + * + * \param ctx PKCS #11 context + * \param mode must be MBEDTLS_RSA_PRIVATE, for compatibility with rsa.c's signature + * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) + * \param hashlen message digest length (for MBEDTLS_MD_NONE only) + * \param hash buffer holding the message digest + * \param sig buffer that will hold the ciphertext + * + * \return 0 if the signing operation was successful, + * or an MBEDTLS_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int mbedtls_pkcs11_sign( mbedtls_pkcs11_context *ctx, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * SSL/TLS wrappers for PKCS#11 functions + */ +static inline int mbedtls_ssl_pkcs11_decrypt( void *ctx, int mode, size_t *olen, + const unsigned char *input, unsigned char *output, + size_t output_max_len ) +{ + return mbedtls_pkcs11_decrypt( (mbedtls_pkcs11_context *) ctx, mode, olen, input, output, + output_max_len ); +} + +static inline int mbedtls_ssl_pkcs11_sign( void *ctx, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, + int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, + const unsigned char *hash, unsigned char *sig ) +{ + ((void) f_rng); + ((void) p_rng); + return mbedtls_pkcs11_sign( (mbedtls_pkcs11_context *) ctx, mode, md_alg, + hashlen, hash, sig ); +} + +static inline size_t mbedtls_ssl_pkcs11_key_len( void *ctx ) +{ + return ( (mbedtls_pkcs11_context *) ctx )->len; +} + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_PKCS11_C */ + +#endif /* MBEDTLS_PKCS11_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs12.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs12.h new file mode 100644 index 000000000..d441357b7 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs12.h @@ -0,0 +1,130 @@ +/** + * \file pkcs12.h + * + * \brief PKCS#12 Personal Information Exchange Syntax + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_PKCS12_H +#define MBEDTLS_PKCS12_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "md.h" +#include "cipher.h" +#include "asn1.h" + +#include <stddef.h> + +#define MBEDTLS_ERR_PKCS12_BAD_INPUT_DATA -0x1F80 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_PKCS12_FEATURE_UNAVAILABLE -0x1F00 /**< Feature not available, e.g. unsupported encryption scheme. */ +#define MBEDTLS_ERR_PKCS12_PBE_INVALID_FORMAT -0x1E80 /**< PBE ASN.1 data not as expected. */ +#define MBEDTLS_ERR_PKCS12_PASSWORD_MISMATCH -0x1E00 /**< Given private key password does not allow for correct decryption. */ + +#define MBEDTLS_PKCS12_DERIVE_KEY 1 /**< encryption/decryption key */ +#define MBEDTLS_PKCS12_DERIVE_IV 2 /**< initialization vector */ +#define MBEDTLS_PKCS12_DERIVE_MAC_KEY 3 /**< integrity / MAC key */ + +#define MBEDTLS_PKCS12_PBE_DECRYPT 0 +#define MBEDTLS_PKCS12_PBE_ENCRYPT 1 + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(MBEDTLS_ASN1_PARSE_C) + +/** + * \brief PKCS12 Password Based function (encryption / decryption) + * for pbeWithSHAAnd128BitRC4 + * + * \param pbe_params an ASN1 buffer containing the pkcs-12PbeParams structure + * \param mode either MBEDTLS_PKCS12_PBE_ENCRYPT or MBEDTLS_PKCS12_PBE_DECRYPT + * \param pwd the password used (may be NULL if no password is used) + * \param pwdlen length of the password (may be 0) + * \param input the input data + * \param len data length + * \param output the output buffer + * + * \return 0 if successful, or a MBEDTLS_ERR_XXX code + */ +int mbedtls_pkcs12_pbe_sha1_rc4_128( mbedtls_asn1_buf *pbe_params, int mode, + const unsigned char *pwd, size_t pwdlen, + const unsigned char *input, size_t len, + unsigned char *output ); + +/** + * \brief PKCS12 Password Based function (encryption / decryption) + * for cipher-based and mbedtls_md-based PBE's + * + * \param pbe_params an ASN1 buffer containing the pkcs-12PbeParams structure + * \param mode either MBEDTLS_PKCS12_PBE_ENCRYPT or MBEDTLS_PKCS12_PBE_DECRYPT + * \param cipher_type the cipher used + * \param md_type the mbedtls_md used + * \param pwd the password used (may be NULL if no password is used) + * \param pwdlen length of the password (may be 0) + * \param input the input data + * \param len data length + * \param output the output buffer + * + * \return 0 if successful, or a MBEDTLS_ERR_XXX code + */ +int mbedtls_pkcs12_pbe( mbedtls_asn1_buf *pbe_params, int mode, + mbedtls_cipher_type_t cipher_type, mbedtls_md_type_t md_type, + const unsigned char *pwd, size_t pwdlen, + const unsigned char *input, size_t len, + unsigned char *output ); + +#endif /* MBEDTLS_ASN1_PARSE_C */ + +/** + * \brief The PKCS#12 derivation function uses a password and a salt + * to produce pseudo-random bits for a particular "purpose". + * + * Depending on the given id, this function can produce an + * encryption/decryption key, an nitialization vector or an + * integrity key. + * + * \param data buffer to store the derived data in + * \param datalen length to fill + * \param pwd password to use (may be NULL if no password is used) + * \param pwdlen length of the password (may be 0) + * \param salt salt buffer to use + * \param saltlen length of the salt + * \param mbedtls_md mbedtls_md type to use during the derivation + * \param id id that describes the purpose (can be MBEDTLS_PKCS12_DERIVE_KEY, + * MBEDTLS_PKCS12_DERIVE_IV or MBEDTLS_PKCS12_DERIVE_MAC_KEY) + * \param iterations number of iterations + * + * \return 0 if successful, or a MD, BIGNUM type error. + */ +int mbedtls_pkcs12_derivation( unsigned char *data, size_t datalen, + const unsigned char *pwd, size_t pwdlen, + const unsigned char *salt, size_t saltlen, + mbedtls_md_type_t mbedtls_md, int id, int iterations ); + +#ifdef __cplusplus +} +#endif + +#endif /* pkcs12.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs5.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs5.h new file mode 100644 index 000000000..c92185f7a --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/pkcs5.h @@ -0,0 +1,109 @@ +/** + * \file pkcs5.h + * + * \brief PKCS#5 functions + * + * \author Mathias Olsson <mathias@kompetensum.com> + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_PKCS5_H +#define MBEDTLS_PKCS5_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "asn1.h" +#include "md.h" + +#include <stddef.h> +#include <stdint.h> + +#define MBEDTLS_ERR_PKCS5_BAD_INPUT_DATA -0x2f80 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_PKCS5_INVALID_FORMAT -0x2f00 /**< Unexpected ASN.1 data. */ +#define MBEDTLS_ERR_PKCS5_FEATURE_UNAVAILABLE -0x2e80 /**< Requested encryption or digest alg not available. */ +#define MBEDTLS_ERR_PKCS5_PASSWORD_MISMATCH -0x2e00 /**< Given private key password does not allow for correct decryption. */ + +#define MBEDTLS_PKCS5_DECRYPT 0 +#define MBEDTLS_PKCS5_ENCRYPT 1 + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(MBEDTLS_ASN1_PARSE_C) + +/** + * \brief PKCS#5 PBES2 function + * + * \param pbe_params the ASN.1 algorithm parameters + * \param mode either MBEDTLS_PKCS5_DECRYPT or MBEDTLS_PKCS5_ENCRYPT + * \param pwd password to use when generating key + * \param pwdlen length of password + * \param data data to process + * \param datalen length of data + * \param output output buffer + * + * \returns 0 on success, or a MBEDTLS_ERR_XXX code if verification fails. + */ +int mbedtls_pkcs5_pbes2( const mbedtls_asn1_buf *pbe_params, int mode, + const unsigned char *pwd, size_t pwdlen, + const unsigned char *data, size_t datalen, + unsigned char *output ); + +#endif /* MBEDTLS_ASN1_PARSE_C */ + +/** + * \brief PKCS#5 PBKDF2 using HMAC + * + * \param ctx Generic HMAC context + * \param password Password to use when generating key + * \param plen Length of password + * \param salt Salt to use when generating key + * \param slen Length of salt + * \param iteration_count Iteration count + * \param key_length Length of generated key in bytes + * \param output Generated key. Must be at least as big as key_length + * + * \returns 0 on success, or a MBEDTLS_ERR_XXX code if verification fails. + */ +int mbedtls_pkcs5_pbkdf2_hmac( mbedtls_md_context_t *ctx, const unsigned char *password, + size_t plen, const unsigned char *salt, size_t slen, + unsigned int iteration_count, + uint32_t key_length, unsigned char *output ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_pkcs5_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* pkcs5.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform.h new file mode 100644 index 000000000..89fe8a7b1 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform.h @@ -0,0 +1,367 @@ +/** + * \file platform.h + * + * \brief This file contains the definitions and functions of the + * Mbed TLS platform abstraction layer. + * + * The platform abstraction layer removes the need for the library + * to directly link to standard C library functions or operating + * system services, making the library easier to port and embed. + * Application developers and users of the library can provide their own + * implementations of these functions, or implementations specific to + * their platform, which can be statically linked to the library or + * dynamically configured at runtime. + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_PLATFORM_H +#define MBEDTLS_PLATFORM_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#if defined(MBEDTLS_HAVE_TIME) +#include "platform_time.h" +#endif + +#define MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED -0x0070 /**< Hardware accelerator failed */ +#define MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED -0x0072 /**< The requested feature is not supported by the platform */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ + +#if !defined(MBEDTLS_PLATFORM_NO_STD_FUNCTIONS) +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#if !defined(MBEDTLS_PLATFORM_STD_SNPRINTF) +#if defined(_WIN32) +#define MBEDTLS_PLATFORM_STD_SNPRINTF mbedtls_platform_win32_snprintf /**< The default \c snprintf function to use. */ +#else +#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< The default \c snprintf function to use. */ +#endif +#endif +#if !defined(MBEDTLS_PLATFORM_STD_PRINTF) +#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< The default \c printf function to use. */ +#endif +#if !defined(MBEDTLS_PLATFORM_STD_FPRINTF) +#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< The default \c fprintf function to use. */ +#endif +#if !defined(MBEDTLS_PLATFORM_STD_CALLOC) +#define MBEDTLS_PLATFORM_STD_CALLOC calloc /**< The default \c calloc function to use. */ +#endif +#if !defined(MBEDTLS_PLATFORM_STD_FREE) +#define MBEDTLS_PLATFORM_STD_FREE free /**< The default \c free function to use. */ +#endif +#if !defined(MBEDTLS_PLATFORM_STD_EXIT) +#define MBEDTLS_PLATFORM_STD_EXIT exit /**< The default \c exit function to use. */ +#endif +#if !defined(MBEDTLS_PLATFORM_STD_TIME) +#define MBEDTLS_PLATFORM_STD_TIME time /**< The default \c time function to use. */ +#endif +#if !defined(MBEDTLS_PLATFORM_STD_EXIT_SUCCESS) +#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS EXIT_SUCCESS /**< The default exit value to use. */ +#endif +#if !defined(MBEDTLS_PLATFORM_STD_EXIT_FAILURE) +#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE EXIT_FAILURE /**< The default exit value to use. */ +#endif +#if defined(MBEDTLS_FS_IO) +#if !defined(MBEDTLS_PLATFORM_STD_NV_SEED_READ) +#define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read +#endif +#if !defined(MBEDTLS_PLATFORM_STD_NV_SEED_WRITE) +#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write +#endif +#if !defined(MBEDTLS_PLATFORM_STD_NV_SEED_FILE) +#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" +#endif +#endif /* MBEDTLS_FS_IO */ +#else /* MBEDTLS_PLATFORM_NO_STD_FUNCTIONS */ +#if defined(MBEDTLS_PLATFORM_STD_MEM_HDR) +#include MBEDTLS_PLATFORM_STD_MEM_HDR +#endif +#endif /* MBEDTLS_PLATFORM_NO_STD_FUNCTIONS */ + + +/* \} name SECTION: Module settings */ + +/* + * The function pointers for calloc and free. + */ +#if defined(MBEDTLS_PLATFORM_MEMORY) +#if defined(MBEDTLS_PLATFORM_FREE_MACRO) && \ + defined(MBEDTLS_PLATFORM_CALLOC_MACRO) +#define mbedtls_free MBEDTLS_PLATFORM_FREE_MACRO +#define mbedtls_calloc MBEDTLS_PLATFORM_CALLOC_MACRO +#else +/* For size_t */ +#include <stddef.h> +extern void *mbedtls_calloc( size_t n, size_t size ); +extern void mbedtls_free( void *ptr ); + +/** + * \brief This function dynamically sets the memory-management + * functions used by the library, during runtime. + * + * \param calloc_func The \c calloc function implementation. + * \param free_func The \c free function implementation. + * + * \return \c 0. + */ +int mbedtls_platform_set_calloc_free( void * (*calloc_func)( size_t, size_t ), + void (*free_func)( void * ) ); +#endif /* MBEDTLS_PLATFORM_FREE_MACRO && MBEDTLS_PLATFORM_CALLOC_MACRO */ +#else /* !MBEDTLS_PLATFORM_MEMORY */ +#define mbedtls_free free +#define mbedtls_calloc calloc +#endif /* MBEDTLS_PLATFORM_MEMORY && !MBEDTLS_PLATFORM_{FREE,CALLOC}_MACRO */ + +/* + * The function pointers for fprintf + */ +#if defined(MBEDTLS_PLATFORM_FPRINTF_ALT) +/* We need FILE * */ +#include <stdio.h> +extern int (*mbedtls_fprintf)( FILE *stream, const char *format, ... ); + +/** + * \brief This function dynamically configures the fprintf + * function that is called when the + * mbedtls_fprintf() function is invoked by the library. + * + * \param fprintf_func The \c fprintf function implementation. + * + * \return \c 0. + */ +int mbedtls_platform_set_fprintf( int (*fprintf_func)( FILE *stream, const char *, + ... ) ); +#else +#if defined(MBEDTLS_PLATFORM_FPRINTF_MACRO) +#define mbedtls_fprintf MBEDTLS_PLATFORM_FPRINTF_MACRO +#else +#define mbedtls_fprintf fprintf +#endif /* MBEDTLS_PLATFORM_FPRINTF_MACRO */ +#endif /* MBEDTLS_PLATFORM_FPRINTF_ALT */ + +/* + * The function pointers for printf + */ +#if defined(MBEDTLS_PLATFORM_PRINTF_ALT) +extern int (*mbedtls_printf)( const char *format, ... ); + +/** + * \brief This function dynamically configures the snprintf + * function that is called when the mbedtls_snprintf() + * function is invoked by the library. + * + * \param printf_func The \c printf function implementation. + * + * \return \c 0 on success. + */ +int mbedtls_platform_set_printf( int (*printf_func)( const char *, ... ) ); +#else /* !MBEDTLS_PLATFORM_PRINTF_ALT */ +#if defined(MBEDTLS_PLATFORM_PRINTF_MACRO) +#define mbedtls_printf MBEDTLS_PLATFORM_PRINTF_MACRO +#else +#define mbedtls_printf printf +#endif /* MBEDTLS_PLATFORM_PRINTF_MACRO */ +#endif /* MBEDTLS_PLATFORM_PRINTF_ALT */ + +/* + * The function pointers for snprintf + * + * The snprintf implementation should conform to C99: + * - it *must* always correctly zero-terminate the buffer + * (except when n == 0, then it must leave the buffer untouched) + * - however it is acceptable to return -1 instead of the required length when + * the destination buffer is too short. + */ +#if defined(_WIN32) +/* For Windows (inc. MSYS2), we provide our own fixed implementation */ +int mbedtls_platform_win32_snprintf( char *s, size_t n, const char *fmt, ... ); +#endif + +#if defined(MBEDTLS_PLATFORM_SNPRINTF_ALT) +extern int (*mbedtls_snprintf)( char * s, size_t n, const char * format, ... ); + +/** + * \brief This function allows configuring a custom + * \c snprintf function pointer. + * + * \param snprintf_func The \c snprintf function implementation. + * + * \return \c 0 on success. + */ +int mbedtls_platform_set_snprintf( int (*snprintf_func)( char * s, size_t n, + const char * format, ... ) ); +#else /* MBEDTLS_PLATFORM_SNPRINTF_ALT */ +#if defined(MBEDTLS_PLATFORM_SNPRINTF_MACRO) +#define mbedtls_snprintf MBEDTLS_PLATFORM_SNPRINTF_MACRO +#else +#define mbedtls_snprintf MBEDTLS_PLATFORM_STD_SNPRINTF +#endif /* MBEDTLS_PLATFORM_SNPRINTF_MACRO */ +#endif /* MBEDTLS_PLATFORM_SNPRINTF_ALT */ + +/* + * The function pointers for exit + */ +#if defined(MBEDTLS_PLATFORM_EXIT_ALT) +extern void (*mbedtls_exit)( int status ); + +/** + * \brief This function dynamically configures the exit + * function that is called when the mbedtls_exit() + * function is invoked by the library. + * + * \param exit_func The \c exit function implementation. + * + * \return \c 0 on success. + */ +int mbedtls_platform_set_exit( void (*exit_func)( int status ) ); +#else +#if defined(MBEDTLS_PLATFORM_EXIT_MACRO) +#define mbedtls_exit MBEDTLS_PLATFORM_EXIT_MACRO +#else +#define mbedtls_exit exit +#endif /* MBEDTLS_PLATFORM_EXIT_MACRO */ +#endif /* MBEDTLS_PLATFORM_EXIT_ALT */ + +/* + * The default exit values + */ +#if defined(MBEDTLS_PLATFORM_STD_EXIT_SUCCESS) +#define MBEDTLS_EXIT_SUCCESS MBEDTLS_PLATFORM_STD_EXIT_SUCCESS +#else +#define MBEDTLS_EXIT_SUCCESS 0 +#endif +#if defined(MBEDTLS_PLATFORM_STD_EXIT_FAILURE) +#define MBEDTLS_EXIT_FAILURE MBEDTLS_PLATFORM_STD_EXIT_FAILURE +#else +#define MBEDTLS_EXIT_FAILURE 1 +#endif + +/* + * The function pointers for reading from and writing a seed file to + * Non-Volatile storage (NV) in a platform-independent way + * + * Only enabled when the NV seed entropy source is enabled + */ +#if defined(MBEDTLS_ENTROPY_NV_SEED) +#if !defined(MBEDTLS_PLATFORM_NO_STD_FUNCTIONS) && defined(MBEDTLS_FS_IO) +/* Internal standard platform definitions */ +int mbedtls_platform_std_nv_seed_read( unsigned char *buf, size_t buf_len ); +int mbedtls_platform_std_nv_seed_write( unsigned char *buf, size_t buf_len ); +#endif + +#if defined(MBEDTLS_PLATFORM_NV_SEED_ALT) +extern int (*mbedtls_nv_seed_read)( unsigned char *buf, size_t buf_len ); +extern int (*mbedtls_nv_seed_write)( unsigned char *buf, size_t buf_len ); + +/** + * \brief This function allows configuring custom seed file writing and + * reading functions. + * + * \param nv_seed_read_func The seed reading function implementation. + * \param nv_seed_write_func The seed writing function implementation. + * + * \return \c 0 on success. + */ +int mbedtls_platform_set_nv_seed( + int (*nv_seed_read_func)( unsigned char *buf, size_t buf_len ), + int (*nv_seed_write_func)( unsigned char *buf, size_t buf_len ) + ); +#else +#if defined(MBEDTLS_PLATFORM_NV_SEED_READ_MACRO) && \ + defined(MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO) +#define mbedtls_nv_seed_read MBEDTLS_PLATFORM_NV_SEED_READ_MACRO +#define mbedtls_nv_seed_write MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO +#else +#define mbedtls_nv_seed_read mbedtls_platform_std_nv_seed_read +#define mbedtls_nv_seed_write mbedtls_platform_std_nv_seed_write +#endif +#endif /* MBEDTLS_PLATFORM_NV_SEED_ALT */ +#endif /* MBEDTLS_ENTROPY_NV_SEED */ + +#if !defined(MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT) + +/** + * \brief The platform context structure. + * + * \note This structure may be used to assist platform-specific + * setup or teardown operations. + */ +typedef struct mbedtls_platform_context +{ + char dummy; /**< A placeholder member, as empty structs are not portable. */ +} +mbedtls_platform_context; + +#else +#include "platform_alt.h" +#endif /* !MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT */ + +/** + * \brief This function performs any platform-specific initialization + * operations. + * + * \note This function should be called before any other library functions. + * + * Its implementation is platform-specific, and unless + * platform-specific code is provided, it does nothing. + * + * \note The usage and necessity of this function is dependent on the platform. + * + * \param ctx The platform context. + * + * \return \c 0 on success. + */ +int mbedtls_platform_setup( mbedtls_platform_context *ctx ); +/** + * \brief This function performs any platform teardown operations. + * + * \note This function should be called after every other Mbed TLS module + * has been correctly freed using the appropriate free function. + * + * Its implementation is platform-specific, and unless + * platform-specific code is provided, it does nothing. + * + * \note The usage and necessity of this function is dependent on the platform. + * + * \param ctx The platform context. + * + */ +void mbedtls_platform_teardown( mbedtls_platform_context *ctx ); + +#ifdef __cplusplus +} +#endif + +#endif /* platform.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform_time.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform_time.h new file mode 100644 index 000000000..2ed36f56c --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform_time.h @@ -0,0 +1,82 @@ +/** + * \file platform_time.h + * + * \brief mbed TLS Platform time abstraction + */ +/* + * Copyright (C) 2006-2016, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_PLATFORM_TIME_H +#define MBEDTLS_PLATFORM_TIME_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ + +/* + * The time_t datatype + */ +#if defined(MBEDTLS_PLATFORM_TIME_TYPE_MACRO) +typedef MBEDTLS_PLATFORM_TIME_TYPE_MACRO mbedtls_time_t; +#else +/* For time_t */ +#include <time.h> +typedef time_t mbedtls_time_t; +#endif /* MBEDTLS_PLATFORM_TIME_TYPE_MACRO */ + +/* + * The function pointers for time + */ +#if defined(MBEDTLS_PLATFORM_TIME_ALT) +extern mbedtls_time_t (*mbedtls_time)( mbedtls_time_t* time ); + +/** + * \brief Set your own time function pointer + * + * \param time_func the time function implementation + * + * \return 0 + */ +int mbedtls_platform_set_time( mbedtls_time_t (*time_func)( mbedtls_time_t* time ) ); +#else +#if defined(MBEDTLS_PLATFORM_TIME_MACRO) +#define mbedtls_time MBEDTLS_PLATFORM_TIME_MACRO +#else +#define mbedtls_time time +#endif /* MBEDTLS_PLATFORM_TIME_MACRO */ +#endif /* MBEDTLS_PLATFORM_TIME_ALT */ + +#ifdef __cplusplus +} +#endif + +#endif /* platform_time.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform_util.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform_util.h new file mode 100644 index 000000000..dba6d4598 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/platform_util.h @@ -0,0 +1,185 @@ +/** + * \file platform_util.h + * + * \brief Common and shared functions used by multiple modules in the Mbed TLS + * library. + */ +/* + * Copyright (C) 2018, Arm Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_PLATFORM_UTIL_H +#define MBEDTLS_PLATFORM_UTIL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#if defined(MBEDTLS_HAVE_TIME_DATE) +#include "platform_time.h" +#include <time.h> +#endif /* MBEDTLS_HAVE_TIME_DATE */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(MBEDTLS_CHECK_PARAMS) + +#if defined(MBEDTLS_PARAM_FAILED) +/** An alternative definition of MBEDTLS_PARAM_FAILED has been set in config.h. + * + * This flag can be used to check whether it is safe to assume that + * MBEDTLS_PARAM_FAILED() will expand to a call to mbedtls_param_failed(). + */ +#define MBEDTLS_PARAM_FAILED_ALT +#else /* MBEDTLS_PARAM_FAILED */ +#define MBEDTLS_PARAM_FAILED( cond ) \ + mbedtls_param_failed( #cond, __FILE__, __LINE__ ) + +/** + * \brief User supplied callback function for parameter validation failure. + * See #MBEDTLS_CHECK_PARAMS for context. + * + * This function will be called unless an alternative treatement + * is defined through the #MBEDTLS_PARAM_FAILED macro. + * + * This function can return, and the operation will be aborted, or + * alternatively, through use of setjmp()/longjmp() can resume + * execution in the application code. + * + * \param failure_condition The assertion that didn't hold. + * \param file The file where the assertion failed. + * \param line The line in the file where the assertion failed. + */ +void mbedtls_param_failed( const char *failure_condition, + const char *file, + int line ); +#endif /* MBEDTLS_PARAM_FAILED */ + +/* Internal macro meant to be called only from within the library. */ +#define MBEDTLS_INTERNAL_VALIDATE_RET( cond, ret ) \ + do { \ + if( !(cond) ) \ + { \ + MBEDTLS_PARAM_FAILED( cond ); \ + return( ret ); \ + } \ + } while( 0 ) + +/* Internal macro meant to be called only from within the library. */ +#define MBEDTLS_INTERNAL_VALIDATE( cond ) \ + do { \ + if( !(cond) ) \ + { \ + MBEDTLS_PARAM_FAILED( cond ); \ + return; \ + } \ + } while( 0 ) + +#else /* MBEDTLS_CHECK_PARAMS */ + +/* Internal macros meant to be called only from within the library. */ +#define MBEDTLS_INTERNAL_VALIDATE_RET( cond, ret ) do { } while( 0 ) +#define MBEDTLS_INTERNAL_VALIDATE( cond ) do { } while( 0 ) + +#endif /* MBEDTLS_CHECK_PARAMS */ + +/* Internal helper macros for deprecating API constants. */ +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +/* Deliberately don't (yet) export MBEDTLS_DEPRECATED here + * to avoid conflict with other headers which define and use + * it, too. We might want to move all these definitions here at + * some point for uniformity. */ +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +MBEDTLS_DEPRECATED typedef char const * mbedtls_deprecated_string_constant_t; +#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) \ + ( (mbedtls_deprecated_string_constant_t) ( VAL ) ) +MBEDTLS_DEPRECATED typedef int mbedtls_deprecated_numeric_constant_t; +#define MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( VAL ) \ + ( (mbedtls_deprecated_numeric_constant_t) ( VAL ) ) +#undef MBEDTLS_DEPRECATED +#else /* MBEDTLS_DEPRECATED_WARNING */ +#define MBEDTLS_DEPRECATED_STRING_CONSTANT( VAL ) VAL +#define MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( VAL ) VAL +#endif /* MBEDTLS_DEPRECATED_WARNING */ +#endif /* MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief Securely zeroize a buffer + * + * The function is meant to wipe the data contained in a buffer so + * that it can no longer be recovered even if the program memory + * is later compromised. Call this function on sensitive data + * stored on the stack before returning from a function, and on + * sensitive data stored on the heap before freeing the heap + * object. + * + * It is extremely difficult to guarantee that calls to + * mbedtls_platform_zeroize() are not removed by aggressive + * compiler optimizations in a portable way. For this reason, Mbed + * TLS provides the configuration option + * MBEDTLS_PLATFORM_ZEROIZE_ALT, which allows users to configure + * mbedtls_platform_zeroize() to use a suitable implementation for + * their platform and needs + * + * \param buf Buffer to be zeroized + * \param len Length of the buffer in bytes + * + */ +void mbedtls_platform_zeroize( void *buf, size_t len ); + +#if defined(MBEDTLS_HAVE_TIME_DATE) +/** + * \brief Platform-specific implementation of gmtime_r() + * + * The function is a thread-safe abstraction that behaves + * similarly to the gmtime_r() function from Unix/POSIX. + * + * Mbed TLS will try to identify the underlying platform and + * make use of an appropriate underlying implementation (e.g. + * gmtime_r() for POSIX and gmtime_s() for Windows). If this is + * not possible, then gmtime() will be used. In this case, calls + * from the library to gmtime() will be guarded by the mutex + * mbedtls_threading_gmtime_mutex if MBEDTLS_THREADING_C is + * enabled. It is recommended that calls from outside the library + * are also guarded by this mutex. + * + * If MBEDTLS_PLATFORM_GMTIME_R_ALT is defined, then Mbed TLS will + * unconditionally use the alternative implementation for + * mbedtls_platform_gmtime_r() supplied by the user at compile time. + * + * \param tt Pointer to an object containing time (in seconds) since the + * epoch to be converted + * \param tm_buf Pointer to an object where the results will be stored + * + * \return Pointer to an object of type struct tm on success, otherwise + * NULL + */ +struct tm *mbedtls_platform_gmtime_r( const mbedtls_time_t *tt, + struct tm *tm_buf ); +#endif /* MBEDTLS_HAVE_TIME_DATE */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_PLATFORM_UTIL_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/poly1305.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/poly1305.h new file mode 100644 index 000000000..f0ec44c96 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/poly1305.h @@ -0,0 +1,192 @@ +/** + * \file poly1305.h + * + * \brief This file contains Poly1305 definitions and functions. + * + * Poly1305 is a one-time message authenticator that can be used to + * authenticate messages. Poly1305-AES was created by Daniel + * Bernstein https://cr.yp.to/mac/poly1305-20050329.pdf The generic + * Poly1305 algorithm (not tied to AES) was also standardized in RFC + * 7539. + * + * \author Daniel King <damaki.gh@gmail.com> + */ + +/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved. + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ + +#ifndef MBEDTLS_POLY1305_H +#define MBEDTLS_POLY1305_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stdint.h> +#include <stddef.h> + +#define MBEDTLS_ERR_POLY1305_BAD_INPUT_DATA -0x0057 /**< Invalid input parameter(s). */ + +/* MBEDTLS_ERR_POLY1305_FEATURE_UNAVAILABLE is deprecated and should not be + * used. */ +#define MBEDTLS_ERR_POLY1305_FEATURE_UNAVAILABLE -0x0059 /**< Feature not available. For example, s part of the API is not implemented. */ + +/* MBEDTLS_ERR_POLY1305_HW_ACCEL_FAILED is deprecated and should not be used. + */ +#define MBEDTLS_ERR_POLY1305_HW_ACCEL_FAILED -0x005B /**< Poly1305 hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_POLY1305_ALT) + +typedef struct mbedtls_poly1305_context +{ + uint32_t r[4]; /** The value for 'r' (low 128 bits of the key). */ + uint32_t s[4]; /** The value for 's' (high 128 bits of the key). */ + uint32_t acc[5]; /** The accumulator number. */ + uint8_t queue[16]; /** The current partial block of data. */ + size_t queue_len; /** The number of bytes stored in 'queue'. */ +} +mbedtls_poly1305_context; + +#else /* MBEDTLS_POLY1305_ALT */ +#include "poly1305_alt.h" +#endif /* MBEDTLS_POLY1305_ALT */ + +/** + * \brief This function initializes the specified Poly1305 context. + * + * It must be the first API called before using + * the context. + * + * It is usually followed by a call to + * \c mbedtls_poly1305_starts(), then one or more calls to + * \c mbedtls_poly1305_update(), then one call to + * \c mbedtls_poly1305_finish(), then finally + * \c mbedtls_poly1305_free(). + * + * \param ctx The Poly1305 context to initialize. This must + * not be \c NULL. + */ +void mbedtls_poly1305_init( mbedtls_poly1305_context *ctx ); + +/** + * \brief This function releases and clears the specified + * Poly1305 context. + * + * \param ctx The Poly1305 context to clear. This may be \c NULL, in which + * case this function is a no-op. If it is not \c NULL, it must + * point to an initialized Poly1305 context. + */ +void mbedtls_poly1305_free( mbedtls_poly1305_context *ctx ); + +/** + * \brief This function sets the one-time authentication key. + * + * \warning The key must be unique and unpredictable for each + * invocation of Poly1305. + * + * \param ctx The Poly1305 context to which the key should be bound. + * This must be initialized. + * \param key The buffer containing the \c 32 Byte (\c 256 Bit) key. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_poly1305_starts( mbedtls_poly1305_context *ctx, + const unsigned char key[32] ); + +/** + * \brief This functions feeds an input buffer into an ongoing + * Poly1305 computation. + * + * It is called between \c mbedtls_cipher_poly1305_starts() and + * \c mbedtls_cipher_poly1305_finish(). + * It can be called repeatedly to process a stream of data. + * + * \param ctx The Poly1305 context to use for the Poly1305 operation. + * This must be initialized and bound to a key. + * \param ilen The length of the input data in Bytes. + * Any value is accepted. + * \param input The buffer holding the input data. + * This pointer can be \c NULL if `ilen == 0`. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_poly1305_update( mbedtls_poly1305_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief This function generates the Poly1305 Message + * Authentication Code (MAC). + * + * \param ctx The Poly1305 context to use for the Poly1305 operation. + * This must be initialized and bound to a key. + * \param mac The buffer to where the MAC is written. This must + * be a writable buffer of length \c 16 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_poly1305_finish( mbedtls_poly1305_context *ctx, + unsigned char mac[16] ); + +/** + * \brief This function calculates the Poly1305 MAC of the input + * buffer with the provided key. + * + * \warning The key must be unique and unpredictable for each + * invocation of Poly1305. + * + * \param key The buffer containing the \c 32 Byte (\c 256 Bit) key. + * \param ilen The length of the input data in Bytes. + * Any value is accepted. + * \param input The buffer holding the input data. + * This pointer can be \c NULL if `ilen == 0`. + * \param mac The buffer to where the MAC is written. This must be + * a writable buffer of length \c 16 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_poly1305_mac( const unsigned char key[32], + const unsigned char *input, + size_t ilen, + unsigned char mac[16] ); + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief The Poly1305 checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_poly1305_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_POLY1305_H */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ripemd160.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ripemd160.h new file mode 100644 index 000000000..b42f6d2a9 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ripemd160.h @@ -0,0 +1,237 @@ +/** + * \file ripemd160.h + * + * \brief RIPE MD-160 message digest + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_RIPEMD160_H +#define MBEDTLS_RIPEMD160_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +/* MBEDTLS_ERR_RIPEMD160_HW_ACCEL_FAILED is deprecated and should not be used. + */ +#define MBEDTLS_ERR_RIPEMD160_HW_ACCEL_FAILED -0x0031 /**< RIPEMD160 hardware accelerator failed */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_RIPEMD160_ALT) +// Regular implementation +// + +/** + * \brief RIPEMD-160 context structure + */ +typedef struct mbedtls_ripemd160_context +{ + uint32_t total[2]; /*!< number of bytes processed */ + uint32_t state[5]; /*!< intermediate digest state */ + unsigned char buffer[64]; /*!< data block being processed */ +} +mbedtls_ripemd160_context; + +#else /* MBEDTLS_RIPEMD160_ALT */ +#include "ripemd160.h" +#endif /* MBEDTLS_RIPEMD160_ALT */ + +/** + * \brief Initialize RIPEMD-160 context + * + * \param ctx RIPEMD-160 context to be initialized + */ +void mbedtls_ripemd160_init( mbedtls_ripemd160_context *ctx ); + +/** + * \brief Clear RIPEMD-160 context + * + * \param ctx RIPEMD-160 context to be cleared + */ +void mbedtls_ripemd160_free( mbedtls_ripemd160_context *ctx ); + +/** + * \brief Clone (the state of) an RIPEMD-160 context + * + * \param dst The destination context + * \param src The context to be cloned + */ +void mbedtls_ripemd160_clone( mbedtls_ripemd160_context *dst, + const mbedtls_ripemd160_context *src ); + +/** + * \brief RIPEMD-160 context setup + * + * \param ctx context to be initialized + * + * \return 0 if successful + */ +int mbedtls_ripemd160_starts_ret( mbedtls_ripemd160_context *ctx ); + +/** + * \brief RIPEMD-160 process buffer + * + * \param ctx RIPEMD-160 context + * \param input buffer holding the data + * \param ilen length of the input data + * + * \return 0 if successful + */ +int mbedtls_ripemd160_update_ret( mbedtls_ripemd160_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief RIPEMD-160 final digest + * + * \param ctx RIPEMD-160 context + * \param output RIPEMD-160 checksum result + * + * \return 0 if successful + */ +int mbedtls_ripemd160_finish_ret( mbedtls_ripemd160_context *ctx, + unsigned char output[20] ); + +/** + * \brief RIPEMD-160 process data block (internal use only) + * + * \param ctx RIPEMD-160 context + * \param data buffer holding one block of data + * + * \return 0 if successful + */ +int mbedtls_internal_ripemd160_process( mbedtls_ripemd160_context *ctx, + const unsigned char data[64] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief RIPEMD-160 context setup + * + * \deprecated Superseded by mbedtls_ripemd160_starts_ret() in 2.7.0 + * + * \param ctx context to be initialized + */ +MBEDTLS_DEPRECATED void mbedtls_ripemd160_starts( + mbedtls_ripemd160_context *ctx ); + +/** + * \brief RIPEMD-160 process buffer + * + * \deprecated Superseded by mbedtls_ripemd160_update_ret() in 2.7.0 + * + * \param ctx RIPEMD-160 context + * \param input buffer holding the data + * \param ilen length of the input data + */ +MBEDTLS_DEPRECATED void mbedtls_ripemd160_update( + mbedtls_ripemd160_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief RIPEMD-160 final digest + * + * \deprecated Superseded by mbedtls_ripemd160_finish_ret() in 2.7.0 + * + * \param ctx RIPEMD-160 context + * \param output RIPEMD-160 checksum result + */ +MBEDTLS_DEPRECATED void mbedtls_ripemd160_finish( + mbedtls_ripemd160_context *ctx, + unsigned char output[20] ); + +/** + * \brief RIPEMD-160 process data block (internal use only) + * + * \deprecated Superseded by mbedtls_internal_ripemd160_process() in 2.7.0 + * + * \param ctx RIPEMD-160 context + * \param data buffer holding one block of data + */ +MBEDTLS_DEPRECATED void mbedtls_ripemd160_process( + mbedtls_ripemd160_context *ctx, + const unsigned char data[64] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief Output = RIPEMD-160( input buffer ) + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output RIPEMD-160 checksum result + * + * \return 0 if successful + */ +int mbedtls_ripemd160_ret( const unsigned char *input, + size_t ilen, + unsigned char output[20] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief Output = RIPEMD-160( input buffer ) + * + * \deprecated Superseded by mbedtls_ripemd160_ret() in 2.7.0 + * + * \param input buffer holding the data + * \param ilen length of the input data + * \param output RIPEMD-160 checksum result + */ +MBEDTLS_DEPRECATED void mbedtls_ripemd160( const unsigned char *input, + size_t ilen, + unsigned char output[20] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_ripemd160_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_ripemd160.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/rsa.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/rsa.h new file mode 100644 index 000000000..906c42733 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/rsa.h @@ -0,0 +1,1271 @@ +/** + * \file rsa.h + * + * \brief This file provides an API for the RSA public-key cryptosystem. + * + * The RSA public-key cryptosystem is defined in <em>Public-Key + * Cryptography Standards (PKCS) #1 v1.5: RSA Encryption</em> + * and <em>Public-Key Cryptography Standards (PKCS) #1 v2.1: + * RSA Cryptography Specifications</em>. + * + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_RSA_H +#define MBEDTLS_RSA_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "bignum.h" +#include "md.h" + +#if defined(MBEDTLS_THREADING_C) +#include "threading.h" +#endif + +/* + * RSA Error codes + */ +#define MBEDTLS_ERR_RSA_BAD_INPUT_DATA -0x4080 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_RSA_INVALID_PADDING -0x4100 /**< Input data contains invalid padding and is rejected. */ +#define MBEDTLS_ERR_RSA_KEY_GEN_FAILED -0x4180 /**< Something failed during generation of a key. */ +#define MBEDTLS_ERR_RSA_KEY_CHECK_FAILED -0x4200 /**< Key failed to pass the validity check of the library. */ +#define MBEDTLS_ERR_RSA_PUBLIC_FAILED -0x4280 /**< The public key operation failed. */ +#define MBEDTLS_ERR_RSA_PRIVATE_FAILED -0x4300 /**< The private key operation failed. */ +#define MBEDTLS_ERR_RSA_VERIFY_FAILED -0x4380 /**< The PKCS#1 verification failed. */ +#define MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE -0x4400 /**< The output buffer for decryption is not large enough. */ +#define MBEDTLS_ERR_RSA_RNG_FAILED -0x4480 /**< The random generator failed to generate non-zeros. */ + +/* MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION is deprecated and should not be used. + */ +#define MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION -0x4500 /**< The implementation does not offer the requested operation, for example, because of security violations or lack of functionality. */ + +/* MBEDTLS_ERR_RSA_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_RSA_HW_ACCEL_FAILED -0x4580 /**< RSA hardware accelerator failed. */ + +/* + * RSA constants + */ +#define MBEDTLS_RSA_PUBLIC 0 /**< Request private key operation. */ +#define MBEDTLS_RSA_PRIVATE 1 /**< Request public key operation. */ + +#define MBEDTLS_RSA_PKCS_V15 0 /**< Use PKCS#1 v1.5 encoding. */ +#define MBEDTLS_RSA_PKCS_V21 1 /**< Use PKCS#1 v2.1 encoding. */ + +#define MBEDTLS_RSA_SIGN 1 /**< Identifier for RSA signature operations. */ +#define MBEDTLS_RSA_CRYPT 2 /**< Identifier for RSA encryption and decryption operations. */ + +#define MBEDTLS_RSA_SALT_LEN_ANY -1 + +/* + * The above constants may be used even if the RSA module is compile out, + * eg for alternative (PKCS#11) RSA implemenations in the PK layers. + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_RSA_ALT) +// Regular implementation +// + +/** + * \brief The RSA context structure. + * + * \note Direct manipulation of the members of this structure + * is deprecated. All manipulation should instead be done through + * the public interface functions. + */ +typedef struct mbedtls_rsa_context +{ + int ver; /*!< Always 0.*/ + size_t len; /*!< The size of \p N in Bytes. */ + + mbedtls_mpi N; /*!< The public modulus. */ + mbedtls_mpi E; /*!< The public exponent. */ + + mbedtls_mpi D; /*!< The private exponent. */ + mbedtls_mpi P; /*!< The first prime factor. */ + mbedtls_mpi Q; /*!< The second prime factor. */ + + mbedtls_mpi DP; /*!< <code>D % (P - 1)</code>. */ + mbedtls_mpi DQ; /*!< <code>D % (Q - 1)</code>. */ + mbedtls_mpi QP; /*!< <code>1 / (Q % P)</code>. */ + + mbedtls_mpi RN; /*!< cached <code>R^2 mod N</code>. */ + + mbedtls_mpi RP; /*!< cached <code>R^2 mod P</code>. */ + mbedtls_mpi RQ; /*!< cached <code>R^2 mod Q</code>. */ + + mbedtls_mpi Vi; /*!< The cached blinding value. */ + mbedtls_mpi Vf; /*!< The cached un-blinding value. */ + + int padding; /*!< Selects padding mode: + #MBEDTLS_RSA_PKCS_V15 for 1.5 padding and + #MBEDTLS_RSA_PKCS_V21 for OAEP or PSS. */ + int hash_id; /*!< Hash identifier of mbedtls_md_type_t type, + as specified in md.h for use in the MGF + mask generating function used in the + EME-OAEP and EMSA-PSS encodings. */ +#if defined(MBEDTLS_THREADING_C) + mbedtls_threading_mutex_t mutex; /*!< Thread-safety mutex. */ +#endif +} +mbedtls_rsa_context; + +#else /* MBEDTLS_RSA_ALT */ +#include "rsa_alt.h" +#endif /* MBEDTLS_RSA_ALT */ + +/** + * \brief This function initializes an RSA context. + * + * \note Set padding to #MBEDTLS_RSA_PKCS_V21 for the RSAES-OAEP + * encryption scheme and the RSASSA-PSS signature scheme. + * + * \note The \p hash_id parameter is ignored when using + * #MBEDTLS_RSA_PKCS_V15 padding. + * + * \note The choice of padding mode is strictly enforced for private key + * operations, since there might be security concerns in + * mixing padding modes. For public key operations it is + * a default value, which can be overriden by calling specific + * \c rsa_rsaes_xxx or \c rsa_rsassa_xxx functions. + * + * \note The hash selected in \p hash_id is always used for OEAP + * encryption. For PSS signatures, it is always used for + * making signatures, but can be overriden for verifying them. + * If set to #MBEDTLS_MD_NONE, it is always overriden. + * + * \param ctx The RSA context to initialize. This must not be \c NULL. + * \param padding The padding mode to use. This must be either + * #MBEDTLS_RSA_PKCS_V15 or #MBEDTLS_RSA_PKCS_V21. + * \param hash_id The hash identifier of ::mbedtls_md_type_t type, if + * \p padding is #MBEDTLS_RSA_PKCS_V21. It is unused + * otherwise. + */ +void mbedtls_rsa_init( mbedtls_rsa_context *ctx, + int padding, + int hash_id ); + +/** + * \brief This function imports a set of core parameters into an + * RSA context. + * + * \note This function can be called multiple times for successive + * imports, if the parameters are not simultaneously present. + * + * Any sequence of calls to this function should be followed + * by a call to mbedtls_rsa_complete(), which checks and + * completes the provided information to a ready-for-use + * public or private RSA key. + * + * \note See mbedtls_rsa_complete() for more information on which + * parameters are necessary to set up a private or public + * RSA key. + * + * \note The imported parameters are copied and need not be preserved + * for the lifetime of the RSA context being set up. + * + * \param ctx The initialized RSA context to store the parameters in. + * \param N The RSA modulus. This may be \c NULL. + * \param P The first prime factor of \p N. This may be \c NULL. + * \param Q The second prime factor of \p N. This may be \c NULL. + * \param D The private exponent. This may be \c NULL. + * \param E The public exponent. This may be \c NULL. + * + * \return \c 0 on success. + * \return A non-zero error code on failure. + */ +int mbedtls_rsa_import( mbedtls_rsa_context *ctx, + const mbedtls_mpi *N, + const mbedtls_mpi *P, const mbedtls_mpi *Q, + const mbedtls_mpi *D, const mbedtls_mpi *E ); + +/** + * \brief This function imports core RSA parameters, in raw big-endian + * binary format, into an RSA context. + * + * \note This function can be called multiple times for successive + * imports, if the parameters are not simultaneously present. + * + * Any sequence of calls to this function should be followed + * by a call to mbedtls_rsa_complete(), which checks and + * completes the provided information to a ready-for-use + * public or private RSA key. + * + * \note See mbedtls_rsa_complete() for more information on which + * parameters are necessary to set up a private or public + * RSA key. + * + * \note The imported parameters are copied and need not be preserved + * for the lifetime of the RSA context being set up. + * + * \param ctx The initialized RSA context to store the parameters in. + * \param N The RSA modulus. This may be \c NULL. + * \param N_len The Byte length of \p N; it is ignored if \p N == NULL. + * \param P The first prime factor of \p N. This may be \c NULL. + * \param P_len The Byte length of \p P; it ns ignored if \p P == NULL. + * \param Q The second prime factor of \p N. This may be \c NULL. + * \param Q_len The Byte length of \p Q; it is ignored if \p Q == NULL. + * \param D The private exponent. This may be \c NULL. + * \param D_len The Byte length of \p D; it is ignored if \p D == NULL. + * \param E The public exponent. This may be \c NULL. + * \param E_len The Byte length of \p E; it is ignored if \p E == NULL. + * + * \return \c 0 on success. + * \return A non-zero error code on failure. + */ +int mbedtls_rsa_import_raw( mbedtls_rsa_context *ctx, + unsigned char const *N, size_t N_len, + unsigned char const *P, size_t P_len, + unsigned char const *Q, size_t Q_len, + unsigned char const *D, size_t D_len, + unsigned char const *E, size_t E_len ); + +/** + * \brief This function completes an RSA context from + * a set of imported core parameters. + * + * To setup an RSA public key, precisely \p N and \p E + * must have been imported. + * + * To setup an RSA private key, sufficient information must + * be present for the other parameters to be derivable. + * + * The default implementation supports the following: + * <ul><li>Derive \p P, \p Q from \p N, \p D, \p E.</li> + * <li>Derive \p N, \p D from \p P, \p Q, \p E.</li></ul> + * Alternative implementations need not support these. + * + * If this function runs successfully, it guarantees that + * the RSA context can be used for RSA operations without + * the risk of failure or crash. + * + * \warning This function need not perform consistency checks + * for the imported parameters. In particular, parameters that + * are not needed by the implementation might be silently + * discarded and left unchecked. To check the consistency + * of the key material, see mbedtls_rsa_check_privkey(). + * + * \param ctx The initialized RSA context holding imported parameters. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_RSA_BAD_INPUT_DATA if the attempted derivations + * failed. + * + */ +int mbedtls_rsa_complete( mbedtls_rsa_context *ctx ); + +/** + * \brief This function exports the core parameters of an RSA key. + * + * If this function runs successfully, the non-NULL buffers + * pointed to by \p N, \p P, \p Q, \p D, and \p E are fully + * written, with additional unused space filled leading by + * zero Bytes. + * + * Possible reasons for returning + * #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED:<ul> + * <li>An alternative RSA implementation is in use, which + * stores the key externally, and either cannot or should + * not export it into RAM.</li> + * <li>A SW or HW implementation might not support a certain + * deduction. For example, \p P, \p Q from \p N, \p D, + * and \p E if the former are not part of the + * implementation.</li></ul> + * + * If the function fails due to an unsupported operation, + * the RSA context stays intact and remains usable. + * + * \param ctx The initialized RSA context. + * \param N The MPI to hold the RSA modulus. + * This may be \c NULL if this field need not be exported. + * \param P The MPI to hold the first prime factor of \p N. + * This may be \c NULL if this field need not be exported. + * \param Q The MPI to hold the second prime factor of \p N. + * This may be \c NULL if this field need not be exported. + * \param D The MPI to hold the private exponent. + * This may be \c NULL if this field need not be exported. + * \param E The MPI to hold the public exponent. + * This may be \c NULL if this field need not be exported. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED if exporting the + * requested parameters cannot be done due to missing + * functionality or because of security policies. + * \return A non-zero return code on any other failure. + * + */ +int mbedtls_rsa_export( const mbedtls_rsa_context *ctx, + mbedtls_mpi *N, mbedtls_mpi *P, mbedtls_mpi *Q, + mbedtls_mpi *D, mbedtls_mpi *E ); + +/** + * \brief This function exports core parameters of an RSA key + * in raw big-endian binary format. + * + * If this function runs successfully, the non-NULL buffers + * pointed to by \p N, \p P, \p Q, \p D, and \p E are fully + * written, with additional unused space filled leading by + * zero Bytes. + * + * Possible reasons for returning + * #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED:<ul> + * <li>An alternative RSA implementation is in use, which + * stores the key externally, and either cannot or should + * not export it into RAM.</li> + * <li>A SW or HW implementation might not support a certain + * deduction. For example, \p P, \p Q from \p N, \p D, + * and \p E if the former are not part of the + * implementation.</li></ul> + * If the function fails due to an unsupported operation, + * the RSA context stays intact and remains usable. + * + * \note The length parameters are ignored if the corresponding + * buffer pointers are NULL. + * + * \param ctx The initialized RSA context. + * \param N The Byte array to store the RSA modulus, + * or \c NULL if this field need not be exported. + * \param N_len The size of the buffer for the modulus. + * \param P The Byte array to hold the first prime factor of \p N, + * or \c NULL if this field need not be exported. + * \param P_len The size of the buffer for the first prime factor. + * \param Q The Byte array to hold the second prime factor of \p N, + * or \c NULL if this field need not be exported. + * \param Q_len The size of the buffer for the second prime factor. + * \param D The Byte array to hold the private exponent, + * or \c NULL if this field need not be exported. + * \param D_len The size of the buffer for the private exponent. + * \param E The Byte array to hold the public exponent, + * or \c NULL if this field need not be exported. + * \param E_len The size of the buffer for the public exponent. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED if exporting the + * requested parameters cannot be done due to missing + * functionality or because of security policies. + * \return A non-zero return code on any other failure. + */ +int mbedtls_rsa_export_raw( const mbedtls_rsa_context *ctx, + unsigned char *N, size_t N_len, + unsigned char *P, size_t P_len, + unsigned char *Q, size_t Q_len, + unsigned char *D, size_t D_len, + unsigned char *E, size_t E_len ); + +/** + * \brief This function exports CRT parameters of a private RSA key. + * + * \note Alternative RSA implementations not using CRT-parameters + * internally can implement this function based on + * mbedtls_rsa_deduce_opt(). + * + * \param ctx The initialized RSA context. + * \param DP The MPI to hold \c D modulo `P-1`, + * or \c NULL if it need not be exported. + * \param DQ The MPI to hold \c D modulo `Q-1`, + * or \c NULL if it need not be exported. + * \param QP The MPI to hold modular inverse of \c Q modulo \c P, + * or \c NULL if it need not be exported. + * + * \return \c 0 on success. + * \return A non-zero error code on failure. + * + */ +int mbedtls_rsa_export_crt( const mbedtls_rsa_context *ctx, + mbedtls_mpi *DP, mbedtls_mpi *DQ, mbedtls_mpi *QP ); + +/** + * \brief This function sets padding for an already initialized RSA + * context. See mbedtls_rsa_init() for details. + * + * \param ctx The initialized RSA context to be configured. + * \param padding The padding mode to use. This must be either + * #MBEDTLS_RSA_PKCS_V15 or #MBEDTLS_RSA_PKCS_V21. + * \param hash_id The #MBEDTLS_RSA_PKCS_V21 hash identifier. + */ +void mbedtls_rsa_set_padding( mbedtls_rsa_context *ctx, int padding, + int hash_id ); + +/** + * \brief This function retrieves the length of RSA modulus in Bytes. + * + * \param ctx The initialized RSA context. + * + * \return The length of the RSA modulus in Bytes. + * + */ +size_t mbedtls_rsa_get_len( const mbedtls_rsa_context *ctx ); + +/** + * \brief This function generates an RSA keypair. + * + * \note mbedtls_rsa_init() must be called before this function, + * to set up the RSA context. + * + * \param ctx The initialized RSA context used to hold the key. + * \param f_rng The RNG function to be used for key generation. + * This must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. + * This may be \c NULL if \p f_rng doesn't need a context. + * \param nbits The size of the public key in bits. + * \param exponent The public exponent to use. For example, \c 65537. + * This must be odd and greater than \c 1. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_gen_key( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + unsigned int nbits, int exponent ); + +/** + * \brief This function checks if a context contains at least an RSA + * public key. + * + * If the function runs successfully, it is guaranteed that + * enough information is present to perform an RSA public key + * operation using mbedtls_rsa_public(). + * + * \param ctx The initialized RSA context to check. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + * + */ +int mbedtls_rsa_check_pubkey( const mbedtls_rsa_context *ctx ); + +/** + * \brief This function checks if a context contains an RSA private key + * and perform basic consistency checks. + * + * \note The consistency checks performed by this function not only + * ensure that mbedtls_rsa_private() can be called successfully + * on the given context, but that the various parameters are + * mutually consistent with high probability, in the sense that + * mbedtls_rsa_public() and mbedtls_rsa_private() are inverses. + * + * \warning This function should catch accidental misconfigurations + * like swapping of parameters, but it cannot establish full + * trust in neither the quality nor the consistency of the key + * material that was used to setup the given RSA context: + * <ul><li>Consistency: Imported parameters that are irrelevant + * for the implementation might be silently dropped. If dropped, + * the current function does not have access to them, + * and therefore cannot check them. See mbedtls_rsa_complete(). + * If you want to check the consistency of the entire + * content of an PKCS1-encoded RSA private key, for example, you + * should use mbedtls_rsa_validate_params() before setting + * up the RSA context. + * Additionally, if the implementation performs empirical checks, + * these checks substantiate but do not guarantee consistency.</li> + * <li>Quality: This function is not expected to perform + * extended quality assessments like checking that the prime + * factors are safe. Additionally, it is the responsibility of the + * user to ensure the trustworthiness of the source of his RSA + * parameters, which goes beyond what is effectively checkable + * by the library.</li></ul> + * + * \param ctx The initialized RSA context to check. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_check_privkey( const mbedtls_rsa_context *ctx ); + +/** + * \brief This function checks a public-private RSA key pair. + * + * It checks each of the contexts, and makes sure they match. + * + * \param pub The initialized RSA context holding the public key. + * \param prv The initialized RSA context holding the private key. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_check_pub_priv( const mbedtls_rsa_context *pub, + const mbedtls_rsa_context *prv ); + +/** + * \brief This function performs an RSA public key operation. + * + * \param ctx The initialized RSA context to use. + * \param input The input buffer. This must be a readable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * \param output The output buffer. This must be a writable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \note This function does not handle message padding. + * + * \note Make sure to set \p input[0] = 0 or ensure that + * input is smaller than \p N. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_public( mbedtls_rsa_context *ctx, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function performs an RSA private key operation. + * + * \note Blinding is used if and only if a PRNG is provided. + * + * \note If blinding is used, both the base of exponentation + * and the exponent are blinded, providing protection + * against some side-channel attacks. + * + * \warning It is deprecated and a security risk to not provide + * a PRNG here and thereby prevent the use of blinding. + * Future versions of the library may enforce the presence + * of a PRNG. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG function, used for blinding. It is discouraged + * and deprecated to pass \c NULL here, in which case + * blinding will be omitted. + * \param p_rng The RNG context to pass to \p f_rng. This may be \c NULL + * if \p f_rng is \c NULL or if \p f_rng doesn't need a context. + * \param input The input buffer. This must be a readable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * \param output The output buffer. This must be a writable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + * + */ +int mbedtls_rsa_private( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function adds the message padding, then performs an RSA + * operation. + * + * It is the generic wrapper for performing a PKCS#1 encryption + * operation using the \p mode from the context. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PUBLIC. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PRIVATE and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG to use. It is mandatory for PKCS#1 v2.1 padding + * encoding, and for PKCS#1 v1.5 padding encoding when used + * with \p mode set to #MBEDTLS_RSA_PUBLIC. For PKCS#1 v1.5 + * padding encoding and \p mode set to #MBEDTLS_RSA_PRIVATE, + * it is used for blinding and should be provided in this + * case; see mbedtls_rsa_private() for more. + * \param p_rng The RNG context to be passed to \p f_rng. May be + * \c NULL if \p f_rng is \c NULL or if \p f_rng doesn't + * need a context argument. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated). + * \param ilen The length of the plaintext in Bytes. + * \param input The input data to encrypt. This must be a readable + * buffer of size \p ilen Bytes. This must not be \c NULL. + * \param output The output buffer. This must be a writable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_pkcs1_encrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t ilen, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function performs a PKCS#1 v1.5 encryption operation + * (RSAES-PKCS1-v1_5-ENCRYPT). + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PUBLIC. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PRIVATE and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG function to use. It is needed for padding generation + * if \p mode is #MBEDTLS_RSA_PUBLIC. If \p mode is + * #MBEDTLS_RSA_PRIVATE (discouraged), it is used for + * blinding and should be provided; see mbedtls_rsa_private(). + * \param p_rng The RNG context to be passed to \p f_rng. This may + * be \c NULL if \p f_rng is \c NULL or if \p f_rng + * doesn't need a context argument. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated). + * \param ilen The length of the plaintext in Bytes. + * \param input The input data to encrypt. This must be a readable + * buffer of size \p ilen Bytes. This must not be \c NULL. + * \param output The output buffer. This must be a writable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_rsaes_pkcs1_v15_encrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t ilen, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function performs a PKCS#1 v2.1 OAEP encryption + * operation (RSAES-OAEP-ENCRYPT). + * + * \note The output buffer must be as large as the size + * of ctx->N. For example, 128 Bytes if RSA-1024 is used. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PUBLIC. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PRIVATE and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initnialized RSA context to use. + * \param f_rng The RNG function to use. This is needed for padding + * generation and must be provided. + * \param p_rng The RNG context to be passed to \p f_rng. This may + * be \c NULL if \p f_rng doesn't need a context argument. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated). + * \param label The buffer holding the custom label to use. + * This must be a readable buffer of length \p label_len + * Bytes. It may be \c NULL if \p label_len is \c 0. + * \param label_len The length of the label in Bytes. + * \param ilen The length of the plaintext buffer \p input in Bytes. + * \param input The input data to encrypt. This must be a readable + * buffer of size \p ilen Bytes. This must not be \c NULL. + * \param output The output buffer. This must be a writable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_rsaes_oaep_encrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + const unsigned char *label, size_t label_len, + size_t ilen, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief This function performs an RSA operation, then removes the + * message padding. + * + * It is the generic wrapper for performing a PKCS#1 decryption + * operation using the \p mode from the context. + * + * \note The output buffer length \c output_max_len should be + * as large as the size \p ctx->len of \p ctx->N (for example, + * 128 Bytes if RSA-1024 is used) to be able to hold an + * arbitrary decrypted message. If it is not large enough to + * hold the decryption of the particular ciphertext provided, + * the function returns \c MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PRIVATE. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PUBLIC and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG function. If \p mode is #MBEDTLS_RSA_PRIVATE, + * this is used for blinding and should be provided; see + * mbedtls_rsa_private() for more. If \p mode is + * #MBEDTLS_RSA_PUBLIC, it is ignored. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't need a context. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated). + * \param olen The address at which to store the length of + * the plaintext. This must not be \c NULL. + * \param input The ciphertext buffer. This must be a readable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * \param output The buffer used to hold the plaintext. This must + * be a writable buffer of length \p output_max_len Bytes. + * \param output_max_len The length in Bytes of the output buffer \p output. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_pkcs1_decrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t *olen, + const unsigned char *input, + unsigned char *output, + size_t output_max_len ); + +/** + * \brief This function performs a PKCS#1 v1.5 decryption + * operation (RSAES-PKCS1-v1_5-DECRYPT). + * + * \note The output buffer length \c output_max_len should be + * as large as the size \p ctx->len of \p ctx->N, for example, + * 128 Bytes if RSA-1024 is used, to be able to hold an + * arbitrary decrypted message. If it is not large enough to + * hold the decryption of the particular ciphertext provided, + * the function returns #MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PRIVATE. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PUBLIC and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG function. If \p mode is #MBEDTLS_RSA_PRIVATE, + * this is used for blinding and should be provided; see + * mbedtls_rsa_private() for more. If \p mode is + * #MBEDTLS_RSA_PUBLIC, it is ignored. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't need a context. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated). + * \param olen The address at which to store the length of + * the plaintext. This must not be \c NULL. + * \param input The ciphertext buffer. This must be a readable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * \param output The buffer used to hold the plaintext. This must + * be a writable buffer of length \p output_max_len Bytes. + * \param output_max_len The length in Bytes of the output buffer \p output. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + * + */ +int mbedtls_rsa_rsaes_pkcs1_v15_decrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t *olen, + const unsigned char *input, + unsigned char *output, + size_t output_max_len ); + +/** + * \brief This function performs a PKCS#1 v2.1 OAEP decryption + * operation (RSAES-OAEP-DECRYPT). + * + * \note The output buffer length \c output_max_len should be + * as large as the size \p ctx->len of \p ctx->N, for + * example, 128 Bytes if RSA-1024 is used, to be able to + * hold an arbitrary decrypted message. If it is not + * large enough to hold the decryption of the particular + * ciphertext provided, the function returns + * #MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PRIVATE. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PUBLIC and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG function. If \p mode is #MBEDTLS_RSA_PRIVATE, + * this is used for blinding and should be provided; see + * mbedtls_rsa_private() for more. If \p mode is + * #MBEDTLS_RSA_PUBLIC, it is ignored. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't need a context. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated). + * \param label The buffer holding the custom label to use. + * This must be a readable buffer of length \p label_len + * Bytes. It may be \c NULL if \p label_len is \c 0. + * \param label_len The length of the label in Bytes. + * \param olen The address at which to store the length of + * the plaintext. This must not be \c NULL. + * \param input The ciphertext buffer. This must be a readable buffer + * of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * \param output The buffer used to hold the plaintext. This must + * be a writable buffer of length \p output_max_len Bytes. + * \param output_max_len The length in Bytes of the output buffer \p output. + * + * \return \c 0 on success. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_rsaes_oaep_decrypt( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + const unsigned char *label, size_t label_len, + size_t *olen, + const unsigned char *input, + unsigned char *output, + size_t output_max_len ); + +/** + * \brief This function performs a private RSA operation to sign + * a message digest using PKCS#1. + * + * It is the generic wrapper for performing a PKCS#1 + * signature using the \p mode from the context. + * + * \note The \p sig buffer must be as large as the size + * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. + * + * \note For PKCS#1 v2.1 encoding, see comments on + * mbedtls_rsa_rsassa_pss_sign() for details on + * \p md_alg and \p hash_id. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PRIVATE. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PUBLIC and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG function to use. If the padding mode is PKCS#1 v2.1, + * this must be provided. If the padding mode is PKCS#1 v1.5 and + * \p mode is #MBEDTLS_RSA_PRIVATE, it is used for blinding + * and should be provided; see mbedtls_rsa_private() for more + * more. It is ignored otherwise. + * \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL + * if \p f_rng is \c NULL or doesn't need a context argument. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated). + * \param md_alg The message-digest algorithm used to hash the original data. + * Use #MBEDTLS_MD_NONE for signing raw data. + * \param hashlen The length of the message digest. + * Ths is only used if \p md_alg is #MBEDTLS_MD_NONE. + * \param hash The buffer holding the message digest or raw data. + * If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable + * buffer of length \p hashlen Bytes. If \p md_alg is not + * #MBEDTLS_MD_NONE, it must be a readable buffer of length + * the size of the hash corresponding to \p md_alg. + * \param sig The buffer to hold the signature. This must be a writable + * buffer of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 if the signing operation was successful. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_pkcs1_sign( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * \brief This function performs a PKCS#1 v1.5 signature + * operation (RSASSA-PKCS1-v1_5-SIGN). + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PRIVATE. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PUBLIC and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG function. If \p mode is #MBEDTLS_RSA_PRIVATE, + * this is used for blinding and should be provided; see + * mbedtls_rsa_private() for more. If \p mode is + * #MBEDTLS_RSA_PUBLIC, it is ignored. + * \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL + * if \p f_rng is \c NULL or doesn't need a context argument. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated). + * \param md_alg The message-digest algorithm used to hash the original data. + * Use #MBEDTLS_MD_NONE for signing raw data. + * \param hashlen The length of the message digest. + * Ths is only used if \p md_alg is #MBEDTLS_MD_NONE. + * \param hash The buffer holding the message digest or raw data. + * If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable + * buffer of length \p hashlen Bytes. If \p md_alg is not + * #MBEDTLS_MD_NONE, it must be a readable buffer of length + * the size of the hash corresponding to \p md_alg. + * \param sig The buffer to hold the signature. This must be a writable + * buffer of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 if the signing operation was successful. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * \brief This function performs a PKCS#1 v2.1 PSS signature + * operation (RSASSA-PSS-SIGN). + * + * \note The \p hash_id in the RSA context is the one used for the + * encoding. \p md_alg in the function call is the type of hash + * that is encoded. According to <em>RFC-3447: Public-Key + * Cryptography Standards (PKCS) #1 v2.1: RSA Cryptography + * Specifications</em> it is advised to keep both hashes the + * same. + * + * \note This function always uses the maximum possible salt size, + * up to the length of the payload hash. This choice of salt + * size complies with FIPS 186-4 §5.5 (e) and RFC 8017 (PKCS#1 + * v2.2) §9.1.1 step 3. Furthermore this function enforces a + * minimum salt size which is the hash size minus 2 bytes. If + * this minimum size is too large given the key size (the salt + * size, plus the hash size, plus 2 bytes must be no more than + * the key size in bytes), this function returns + * #MBEDTLS_ERR_RSA_BAD_INPUT_DATA. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PUBLIC mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PRIVATE. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PUBLIC and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA context to use. + * \param f_rng The RNG function. It must not be \c NULL. + * \param p_rng The RNG context to be passed to \p f_rng. This may be \c NULL + * if \p f_rng doesn't need a context argument. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PRIVATE or #MBEDTLS_RSA_PUBLIC (deprecated). + * \param md_alg The message-digest algorithm used to hash the original data. + * Use #MBEDTLS_MD_NONE for signing raw data. + * \param hashlen The length of the message digest. + * Ths is only used if \p md_alg is #MBEDTLS_MD_NONE. + * \param hash The buffer holding the message digest or raw data. + * If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable + * buffer of length \p hashlen Bytes. If \p md_alg is not + * #MBEDTLS_MD_NONE, it must be a readable buffer of length + * the size of the hash corresponding to \p md_alg. + * \param sig The buffer to hold the signature. This must be a writable + * buffer of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 if the signing operation was successful. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * \brief This function performs a public RSA operation and checks + * the message digest. + * + * This is the generic wrapper for performing a PKCS#1 + * verification using the mode from the context. + * + * \note For PKCS#1 v2.1 encoding, see comments on + * mbedtls_rsa_rsassa_pss_verify() about \p md_alg and + * \p hash_id. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * set to #MBEDTLS_RSA_PUBLIC. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PRIVATE and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA public key context to use. + * \param f_rng The RNG function to use. If \p mode is #MBEDTLS_RSA_PRIVATE, + * this is used for blinding and should be provided; see + * mbedtls_rsa_private() for more. Otherwise, it is ignored. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't need a context. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated). + * \param md_alg The message-digest algorithm used to hash the original data. + * Use #MBEDTLS_MD_NONE for signing raw data. + * \param hashlen The length of the message digest. + * This is only used if \p md_alg is #MBEDTLS_MD_NONE. + * \param hash The buffer holding the message digest or raw data. + * If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable + * buffer of length \p hashlen Bytes. If \p md_alg is not + * #MBEDTLS_MD_NONE, it must be a readable buffer of length + * the size of the hash corresponding to \p md_alg. + * \param sig The buffer holding the signature. This must be a readable + * buffer of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 if the verify operation was successful. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_pkcs1_verify( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + const unsigned char *sig ); + +/** + * \brief This function performs a PKCS#1 v1.5 verification + * operation (RSASSA-PKCS1-v1_5-VERIFY). + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * set to #MBEDTLS_RSA_PUBLIC. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PRIVATE and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA public key context to use. + * \param f_rng The RNG function to use. If \p mode is #MBEDTLS_RSA_PRIVATE, + * this is used for blinding and should be provided; see + * mbedtls_rsa_private() for more. Otherwise, it is ignored. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't need a context. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated). + * \param md_alg The message-digest algorithm used to hash the original data. + * Use #MBEDTLS_MD_NONE for signing raw data. + * \param hashlen The length of the message digest. + * This is only used if \p md_alg is #MBEDTLS_MD_NONE. + * \param hash The buffer holding the message digest or raw data. + * If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable + * buffer of length \p hashlen Bytes. If \p md_alg is not + * #MBEDTLS_MD_NONE, it must be a readable buffer of length + * the size of the hash corresponding to \p md_alg. + * \param sig The buffer holding the signature. This must be a readable + * buffer of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 if the verify operation was successful. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_rsassa_pkcs1_v15_verify( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + const unsigned char *sig ); + +/** + * \brief This function performs a PKCS#1 v2.1 PSS verification + * operation (RSASSA-PSS-VERIFY). + * + * The hash function for the MGF mask generating function + * is that specified in the RSA context. + * + * \note The \p hash_id in the RSA context is the one used for the + * verification. \p md_alg in the function call is the type of + * hash that is verified. According to <em>RFC-3447: Public-Key + * Cryptography Standards (PKCS) #1 v2.1: RSA Cryptography + * Specifications</em> it is advised to keep both hashes the + * same. If \p hash_id in the RSA context is unset, + * the \p md_alg from the function call is used. + * + * \deprecated It is deprecated and discouraged to call this function + * in #MBEDTLS_RSA_PRIVATE mode. Future versions of the library + * are likely to remove the \p mode argument and have it + * implicitly set to #MBEDTLS_RSA_PUBLIC. + * + * \note Alternative implementations of RSA need not support + * mode being set to #MBEDTLS_RSA_PRIVATE and might instead + * return #MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED. + * + * \param ctx The initialized RSA public key context to use. + * \param f_rng The RNG function to use. If \p mode is #MBEDTLS_RSA_PRIVATE, + * this is used for blinding and should be provided; see + * mbedtls_rsa_private() for more. Otherwise, it is ignored. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't need a context. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE (deprecated). + * \param md_alg The message-digest algorithm used to hash the original data. + * Use #MBEDTLS_MD_NONE for signing raw data. + * \param hashlen The length of the message digest. + * This is only used if \p md_alg is #MBEDTLS_MD_NONE. + * \param hash The buffer holding the message digest or raw data. + * If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable + * buffer of length \p hashlen Bytes. If \p md_alg is not + * #MBEDTLS_MD_NONE, it must be a readable buffer of length + * the size of the hash corresponding to \p md_alg. + * \param sig The buffer holding the signature. This must be a readable + * buffer of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 if the verify operation was successful. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_rsassa_pss_verify( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + const unsigned char *sig ); + +/** + * \brief This function performs a PKCS#1 v2.1 PSS verification + * operation (RSASSA-PSS-VERIFY). + * + * The hash function for the MGF mask generating function + * is that specified in \p mgf1_hash_id. + * + * \note The \p sig buffer must be as large as the size + * of \p ctx->N. For example, 128 Bytes if RSA-1024 is used. + * + * \note The \p hash_id in the RSA context is ignored. + * + * \param ctx The initialized RSA public key context to use. + * \param f_rng The RNG function to use. If \p mode is #MBEDTLS_RSA_PRIVATE, + * this is used for blinding and should be provided; see + * mbedtls_rsa_private() for more. Otherwise, it is ignored. + * \param p_rng The RNG context to be passed to \p f_rng. This may be + * \c NULL if \p f_rng is \c NULL or doesn't need a context. + * \param mode The mode of operation. This must be either + * #MBEDTLS_RSA_PUBLIC or #MBEDTLS_RSA_PRIVATE. + * \param md_alg The message-digest algorithm used to hash the original data. + * Use #MBEDTLS_MD_NONE for signing raw data. + * \param hashlen The length of the message digest. + * This is only used if \p md_alg is #MBEDTLS_MD_NONE. + * \param hash The buffer holding the message digest or raw data. + * If \p md_alg is #MBEDTLS_MD_NONE, this must be a readable + * buffer of length \p hashlen Bytes. If \p md_alg is not + * #MBEDTLS_MD_NONE, it must be a readable buffer of length + * the size of the hash corresponding to \p md_alg. + * \param mgf1_hash_id The message digest used for mask generation. + * \param expected_salt_len The length of the salt used in padding. Use + * #MBEDTLS_RSA_SALT_LEN_ANY to accept any salt length. + * \param sig The buffer holding the signature. This must be a readable + * buffer of length \c ctx->len Bytes. For example, \c 256 Bytes + * for an 2048-bit RSA modulus. + * + * \return \c 0 if the verify operation was successful. + * \return An \c MBEDTLS_ERR_RSA_XXX error code on failure. + */ +int mbedtls_rsa_rsassa_pss_verify_ext( mbedtls_rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + mbedtls_md_type_t md_alg, + unsigned int hashlen, + const unsigned char *hash, + mbedtls_md_type_t mgf1_hash_id, + int expected_salt_len, + const unsigned char *sig ); + +/** + * \brief This function copies the components of an RSA context. + * + * \param dst The destination context. This must be initialized. + * \param src The source context. This must be initialized. + * + * \return \c 0 on success. + * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory allocation failure. + */ +int mbedtls_rsa_copy( mbedtls_rsa_context *dst, const mbedtls_rsa_context *src ); + +/** + * \brief This function frees the components of an RSA key. + * + * \param ctx The RSA context to free. May be \c NULL, in which case + * this function is a no-op. If it is not \c NULL, it must + * point to an initialized RSA context. + */ +void mbedtls_rsa_free( mbedtls_rsa_context *ctx ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief The RSA checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_rsa_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* rsa.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/rsa_internal.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/rsa_internal.h new file mode 100644 index 000000000..53abd3c5b --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/rsa_internal.h @@ -0,0 +1,226 @@ +/** + * \file rsa_internal.h + * + * \brief Context-independent RSA helper functions + * + * This module declares some RSA-related helper functions useful when + * implementing the RSA interface. These functions are provided in a separate + * compilation unit in order to make it easy for designers of alternative RSA + * implementations to use them in their own code, as it is conceived that the + * functionality they provide will be necessary for most complete + * implementations. + * + * End-users of Mbed TLS who are not providing their own alternative RSA + * implementations should not use these functions directly, and should instead + * use only the functions declared in rsa.h. + * + * The interface provided by this module will be maintained through LTS (Long + * Term Support) branches of Mbed TLS, but may otherwise be subject to change, + * and must be considered an internal interface of the library. + * + * There are two classes of helper functions: + * + * (1) Parameter-generating helpers. These are: + * - mbedtls_rsa_deduce_primes + * - mbedtls_rsa_deduce_private_exponent + * - mbedtls_rsa_deduce_crt + * Each of these functions takes a set of core RSA parameters and + * generates some other, or CRT related parameters. + * + * (2) Parameter-checking helpers. These are: + * - mbedtls_rsa_validate_params + * - mbedtls_rsa_validate_crt + * They take a set of core or CRT related RSA parameters and check their + * validity. + * + */ +/* + * Copyright (C) 2006-2017, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + * + */ + +#ifndef MBEDTLS_RSA_INTERNAL_H +#define MBEDTLS_RSA_INTERNAL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "bignum.h" + +#ifdef __cplusplus +extern "C" { +#endif + + +/** + * \brief Compute RSA prime moduli P, Q from public modulus N=PQ + * and a pair of private and public key. + * + * \note This is a 'static' helper function not operating on + * an RSA context. Alternative implementations need not + * overwrite it. + * + * \param N RSA modulus N = PQ, with P, Q to be found + * \param E RSA public exponent + * \param D RSA private exponent + * \param P Pointer to MPI holding first prime factor of N on success + * \param Q Pointer to MPI holding second prime factor of N on success + * + * \return + * - 0 if successful. In this case, P and Q constitute a + * factorization of N. + * - A non-zero error code otherwise. + * + * \note It is neither checked that P, Q are prime nor that + * D, E are modular inverses wrt. P-1 and Q-1. For that, + * use the helper function \c mbedtls_rsa_validate_params. + * + */ +int mbedtls_rsa_deduce_primes( mbedtls_mpi const *N, mbedtls_mpi const *E, + mbedtls_mpi const *D, + mbedtls_mpi *P, mbedtls_mpi *Q ); + +/** + * \brief Compute RSA private exponent from + * prime moduli and public key. + * + * \note This is a 'static' helper function not operating on + * an RSA context. Alternative implementations need not + * overwrite it. + * + * \param P First prime factor of RSA modulus + * \param Q Second prime factor of RSA modulus + * \param E RSA public exponent + * \param D Pointer to MPI holding the private exponent on success. + * + * \return + * - 0 if successful. In this case, D is set to a simultaneous + * modular inverse of E modulo both P-1 and Q-1. + * - A non-zero error code otherwise. + * + * \note This function does not check whether P and Q are primes. + * + */ +int mbedtls_rsa_deduce_private_exponent( mbedtls_mpi const *P, + mbedtls_mpi const *Q, + mbedtls_mpi const *E, + mbedtls_mpi *D ); + + +/** + * \brief Generate RSA-CRT parameters + * + * \note This is a 'static' helper function not operating on + * an RSA context. Alternative implementations need not + * overwrite it. + * + * \param P First prime factor of N + * \param Q Second prime factor of N + * \param D RSA private exponent + * \param DP Output variable for D modulo P-1 + * \param DQ Output variable for D modulo Q-1 + * \param QP Output variable for the modular inverse of Q modulo P. + * + * \return 0 on success, non-zero error code otherwise. + * + * \note This function does not check whether P, Q are + * prime and whether D is a valid private exponent. + * + */ +int mbedtls_rsa_deduce_crt( const mbedtls_mpi *P, const mbedtls_mpi *Q, + const mbedtls_mpi *D, mbedtls_mpi *DP, + mbedtls_mpi *DQ, mbedtls_mpi *QP ); + + +/** + * \brief Check validity of core RSA parameters + * + * \note This is a 'static' helper function not operating on + * an RSA context. Alternative implementations need not + * overwrite it. + * + * \param N RSA modulus N = PQ + * \param P First prime factor of N + * \param Q Second prime factor of N + * \param D RSA private exponent + * \param E RSA public exponent + * \param f_rng PRNG to be used for primality check, or NULL + * \param p_rng PRNG context for f_rng, or NULL + * + * \return + * - 0 if the following conditions are satisfied + * if all relevant parameters are provided: + * - P prime if f_rng != NULL (%) + * - Q prime if f_rng != NULL (%) + * - 1 < N = P * Q + * - 1 < D, E < N + * - D and E are modular inverses modulo P-1 and Q-1 + * (%) This is only done if MBEDTLS_GENPRIME is defined. + * - A non-zero error code otherwise. + * + * \note The function can be used with a restricted set of arguments + * to perform specific checks only. E.g., calling it with + * (-,P,-,-,-) and a PRNG amounts to a primality check for P. + */ +int mbedtls_rsa_validate_params( const mbedtls_mpi *N, const mbedtls_mpi *P, + const mbedtls_mpi *Q, const mbedtls_mpi *D, + const mbedtls_mpi *E, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Check validity of RSA CRT parameters + * + * \note This is a 'static' helper function not operating on + * an RSA context. Alternative implementations need not + * overwrite it. + * + * \param P First prime factor of RSA modulus + * \param Q Second prime factor of RSA modulus + * \param D RSA private exponent + * \param DP MPI to check for D modulo P-1 + * \param DQ MPI to check for D modulo P-1 + * \param QP MPI to check for the modular inverse of Q modulo P. + * + * \return + * - 0 if the following conditions are satisfied: + * - D = DP mod P-1 if P, D, DP != NULL + * - Q = DQ mod P-1 if P, D, DQ != NULL + * - QP = Q^-1 mod P if P, Q, QP != NULL + * - \c MBEDTLS_ERR_RSA_KEY_CHECK_FAILED if check failed, + * potentially including \c MBEDTLS_ERR_MPI_XXX if some + * MPI calculations failed. + * - \c MBEDTLS_ERR_RSA_BAD_INPUT_DATA if insufficient + * data was provided to check DP, DQ or QP. + * + * \note The function can be used with a restricted set of arguments + * to perform specific checks only. E.g., calling it with the + * parameters (P, -, D, DP, -, -) will check DP = D mod P-1. + */ +int mbedtls_rsa_validate_crt( const mbedtls_mpi *P, const mbedtls_mpi *Q, + const mbedtls_mpi *D, const mbedtls_mpi *DP, + const mbedtls_mpi *DQ, const mbedtls_mpi *QP ); + +#ifdef __cplusplus +} +#endif + +#endif /* rsa_internal.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha1.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha1.h new file mode 100644 index 000000000..bb6ecf05a --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha1.h @@ -0,0 +1,352 @@ +/** + * \file sha1.h + * + * \brief This file contains SHA-1 definitions and functions. + * + * The Secure Hash Algorithm 1 (SHA-1) cryptographic hash function is defined in + * <em>FIPS 180-4: Secure Hash Standard (SHS)</em>. + * + * \warning SHA-1 is considered a weak message digest and its use constitutes + * a security risk. We recommend considering stronger message + * digests instead. + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SHA1_H +#define MBEDTLS_SHA1_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +/* MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_SHA1_HW_ACCEL_FAILED -0x0035 /**< SHA-1 hardware accelerator failed */ +#define MBEDTLS_ERR_SHA1_BAD_INPUT_DATA -0x0073 /**< SHA-1 input data was malformed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_SHA1_ALT) +// Regular implementation +// + +/** + * \brief The SHA-1 context structure. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + */ +typedef struct mbedtls_sha1_context +{ + uint32_t total[2]; /*!< The number of Bytes processed. */ + uint32_t state[5]; /*!< The intermediate digest state. */ + unsigned char buffer[64]; /*!< The data block being processed. */ +} +mbedtls_sha1_context; + +#else /* MBEDTLS_SHA1_ALT */ +#include "sha1_alt.h" +#endif /* MBEDTLS_SHA1_ALT */ + +/** + * \brief This function initializes a SHA-1 context. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \param ctx The SHA-1 context to initialize. + * This must not be \c NULL. + * + */ +void mbedtls_sha1_init( mbedtls_sha1_context *ctx ); + +/** + * \brief This function clears a SHA-1 context. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \param ctx The SHA-1 context to clear. This may be \c NULL, + * in which case this function does nothing. If it is + * not \c NULL, it must point to an initialized + * SHA-1 context. + * + */ +void mbedtls_sha1_free( mbedtls_sha1_context *ctx ); + +/** + * \brief This function clones the state of a SHA-1 context. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \param dst The SHA-1 context to clone to. This must be initialized. + * \param src The SHA-1 context to clone from. This must be initialized. + * + */ +void mbedtls_sha1_clone( mbedtls_sha1_context *dst, + const mbedtls_sha1_context *src ); + +/** + * \brief This function starts a SHA-1 checksum calculation. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \param ctx The SHA-1 context to initialize. This must be initialized. + * + * \return \c 0 on success. + * \return A negative error code on failure. + * + */ +int mbedtls_sha1_starts_ret( mbedtls_sha1_context *ctx ); + +/** + * \brief This function feeds an input buffer into an ongoing SHA-1 + * checksum calculation. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \param ctx The SHA-1 context. This must be initialized + * and have a hash operation started. + * \param input The buffer holding the input data. + * This must be a readable buffer of length \p ilen Bytes. + * \param ilen The length of the input data \p input in Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha1_update_ret( mbedtls_sha1_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief This function finishes the SHA-1 operation, and writes + * the result to the output buffer. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \param ctx The SHA-1 context to use. This must be initialized and + * have a hash operation started. + * \param output The SHA-1 checksum result. This must be a writable + * buffer of length \c 20 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha1_finish_ret( mbedtls_sha1_context *ctx, + unsigned char output[20] ); + +/** + * \brief SHA-1 process data block (internal use only). + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \param ctx The SHA-1 context to use. This must be initialized. + * \param data The data block being processed. This must be a + * readable buffer of length \c 64 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + * + */ +int mbedtls_internal_sha1_process( mbedtls_sha1_context *ctx, + const unsigned char data[64] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief This function starts a SHA-1 checksum calculation. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \deprecated Superseded by mbedtls_sha1_starts_ret() in 2.7.0. + * + * \param ctx The SHA-1 context to initialize. This must be initialized. + * + */ +MBEDTLS_DEPRECATED void mbedtls_sha1_starts( mbedtls_sha1_context *ctx ); + +/** + * \brief This function feeds an input buffer into an ongoing SHA-1 + * checksum calculation. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \deprecated Superseded by mbedtls_sha1_update_ret() in 2.7.0. + * + * \param ctx The SHA-1 context. This must be initialized and + * have a hash operation started. + * \param input The buffer holding the input data. + * This must be a readable buffer of length \p ilen Bytes. + * \param ilen The length of the input data \p input in Bytes. + * + */ +MBEDTLS_DEPRECATED void mbedtls_sha1_update( mbedtls_sha1_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief This function finishes the SHA-1 operation, and writes + * the result to the output buffer. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \deprecated Superseded by mbedtls_sha1_finish_ret() in 2.7.0. + * + * \param ctx The SHA-1 context. This must be initialized and + * have a hash operation started. + * \param output The SHA-1 checksum result. + * This must be a writable buffer of length \c 20 Bytes. + */ +MBEDTLS_DEPRECATED void mbedtls_sha1_finish( mbedtls_sha1_context *ctx, + unsigned char output[20] ); + +/** + * \brief SHA-1 process data block (internal use only). + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \deprecated Superseded by mbedtls_internal_sha1_process() in 2.7.0. + * + * \param ctx The SHA-1 context. This must be initialized. + * \param data The data block being processed. + * This must be a readable buffer of length \c 64 bytes. + * + */ +MBEDTLS_DEPRECATED void mbedtls_sha1_process( mbedtls_sha1_context *ctx, + const unsigned char data[64] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief This function calculates the SHA-1 checksum of a buffer. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The SHA-1 result is calculated as + * output = SHA-1(input buffer). + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \param input The buffer holding the input data. + * This must be a readable buffer of length \p ilen Bytes. + * \param ilen The length of the input data \p input in Bytes. + * \param output The SHA-1 checksum result. + * This must be a writable buffer of length \c 20 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + * + */ +int mbedtls_sha1_ret( const unsigned char *input, + size_t ilen, + unsigned char output[20] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief This function calculates the SHA-1 checksum of a buffer. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The SHA-1 result is calculated as + * output = SHA-1(input buffer). + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \deprecated Superseded by mbedtls_sha1_ret() in 2.7.0 + * + * \param input The buffer holding the input data. + * This must be a readable buffer of length \p ilen Bytes. + * \param ilen The length of the input data \p input in Bytes. + * \param output The SHA-1 checksum result. This must be a writable + * buffer of size \c 20 Bytes. + * + */ +MBEDTLS_DEPRECATED void mbedtls_sha1( const unsigned char *input, + size_t ilen, + unsigned char output[20] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief The SHA-1 checkup routine. + * + * \warning SHA-1 is considered a weak message digest and its use + * constitutes a security risk. We recommend considering + * stronger message digests instead. + * + * \return \c 0 on success. + * \return \c 1 on failure. + * + */ +int mbedtls_sha1_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_sha1.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha256.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha256.h new file mode 100644 index 000000000..d64739820 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha256.h @@ -0,0 +1,297 @@ +/** + * \file sha256.h + * + * \brief This file contains SHA-224 and SHA-256 definitions and functions. + * + * The Secure Hash Algorithms 224 and 256 (SHA-224 and SHA-256) cryptographic + * hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>. + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SHA256_H +#define MBEDTLS_SHA256_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +/* MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED -0x0037 /**< SHA-256 hardware accelerator failed */ +#define MBEDTLS_ERR_SHA256_BAD_INPUT_DATA -0x0074 /**< SHA-256 input data was malformed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_SHA256_ALT) +// Regular implementation +// + +/** + * \brief The SHA-256 context structure. + * + * The structure is used both for SHA-256 and for SHA-224 + * checksum calculations. The choice between these two is + * made in the call to mbedtls_sha256_starts_ret(). + */ +typedef struct mbedtls_sha256_context +{ + uint32_t total[2]; /*!< The number of Bytes processed. */ + uint32_t state[8]; /*!< The intermediate digest state. */ + unsigned char buffer[64]; /*!< The data block being processed. */ + int is224; /*!< Determines which function to use: + 0: Use SHA-256, or 1: Use SHA-224. */ +} +mbedtls_sha256_context; + +#else /* MBEDTLS_SHA256_ALT */ +#include "sha256_alt.h" +#endif /* MBEDTLS_SHA256_ALT */ + +/** + * \brief This function initializes a SHA-256 context. + * + * \param ctx The SHA-256 context to initialize. This must not be \c NULL. + */ +void mbedtls_sha256_init( mbedtls_sha256_context *ctx ); + +/** + * \brief This function clears a SHA-256 context. + * + * \param ctx The SHA-256 context to clear. This may be \c NULL, in which + * case this function returns immediately. If it is not \c NULL, + * it must point to an initialized SHA-256 context. + */ +void mbedtls_sha256_free( mbedtls_sha256_context *ctx ); + +/** + * \brief This function clones the state of a SHA-256 context. + * + * \param dst The destination context. This must be initialized. + * \param src The context to clone. This must be initialized. + */ +void mbedtls_sha256_clone( mbedtls_sha256_context *dst, + const mbedtls_sha256_context *src ); + +/** + * \brief This function starts a SHA-224 or SHA-256 checksum + * calculation. + * + * \param ctx The context to use. This must be initialized. + * \param is224 This determines which function to use. This must be + * either \c 0 for SHA-256, or \c 1 for SHA-224. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha256_starts_ret( mbedtls_sha256_context *ctx, int is224 ); + +/** + * \brief This function feeds an input buffer into an ongoing + * SHA-256 checksum calculation. + * + * \param ctx The SHA-256 context. This must be initialized + * and have a hash operation started. + * \param input The buffer holding the data. This must be a readable + * buffer of length \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha256_update_ret( mbedtls_sha256_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief This function finishes the SHA-256 operation, and writes + * the result to the output buffer. + * + * \param ctx The SHA-256 context. This must be initialized + * and have a hash operation started. + * \param output The SHA-224 or SHA-256 checksum result. + * This must be a writable buffer of length \c 32 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha256_finish_ret( mbedtls_sha256_context *ctx, + unsigned char output[32] ); + +/** + * \brief This function processes a single data block within + * the ongoing SHA-256 computation. This function is for + * internal use only. + * + * \param ctx The SHA-256 context. This must be initialized. + * \param data The buffer holding one block of data. This must + * be a readable buffer of length \c 64 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_internal_sha256_process( mbedtls_sha256_context *ctx, + const unsigned char data[64] ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief This function starts a SHA-224 or SHA-256 checksum + * calculation. + * + * \deprecated Superseded by mbedtls_sha256_starts_ret() in 2.7.0. + * + * \param ctx The context to use. This must be initialized. + * \param is224 Determines which function to use. This must be + * either \c 0 for SHA-256, or \c 1 for SHA-224. + */ +MBEDTLS_DEPRECATED void mbedtls_sha256_starts( mbedtls_sha256_context *ctx, + int is224 ); + +/** + * \brief This function feeds an input buffer into an ongoing + * SHA-256 checksum calculation. + * + * \deprecated Superseded by mbedtls_sha256_update_ret() in 2.7.0. + * + * \param ctx The SHA-256 context to use. This must be + * initialized and have a hash operation started. + * \param input The buffer holding the data. This must be a readable + * buffer of length \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + */ +MBEDTLS_DEPRECATED void mbedtls_sha256_update( mbedtls_sha256_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief This function finishes the SHA-256 operation, and writes + * the result to the output buffer. + * + * \deprecated Superseded by mbedtls_sha256_finish_ret() in 2.7.0. + * + * \param ctx The SHA-256 context. This must be initialized and + * have a hash operation started. + * \param output The SHA-224 or SHA-256 checksum result. This must be + * a writable buffer of length \c 32 Bytes. + */ +MBEDTLS_DEPRECATED void mbedtls_sha256_finish( mbedtls_sha256_context *ctx, + unsigned char output[32] ); + +/** + * \brief This function processes a single data block within + * the ongoing SHA-256 computation. This function is for + * internal use only. + * + * \deprecated Superseded by mbedtls_internal_sha256_process() in 2.7.0. + * + * \param ctx The SHA-256 context. This must be initialized. + * \param data The buffer holding one block of data. This must be + * a readable buffer of size \c 64 Bytes. + */ +MBEDTLS_DEPRECATED void mbedtls_sha256_process( mbedtls_sha256_context *ctx, + const unsigned char data[64] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief This function calculates the SHA-224 or SHA-256 + * checksum of a buffer. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The SHA-256 result is calculated as + * output = SHA-256(input buffer). + * + * \param input The buffer holding the data. This must be a readable + * buffer of length \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + * \param output The SHA-224 or SHA-256 checksum result. This must + * be a writable buffer of length \c 32 Bytes. + * \param is224 Determines which function to use. This must be + * either \c 0 for SHA-256, or \c 1 for SHA-224. + */ +int mbedtls_sha256_ret( const unsigned char *input, + size_t ilen, + unsigned char output[32], + int is224 ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif + +/** + * \brief This function calculates the SHA-224 or SHA-256 checksum + * of a buffer. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The SHA-256 result is calculated as + * output = SHA-256(input buffer). + * + * \deprecated Superseded by mbedtls_sha256_ret() in 2.7.0. + * + * \param input The buffer holding the data. This must be a readable + * buffer of length \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + * \param output The SHA-224 or SHA-256 checksum result. This must be + * a writable buffer of length \c 32 Bytes. + * \param is224 Determines which function to use. This must be either + * \c 0 for SHA-256, or \c 1 for SHA-224. + */ +MBEDTLS_DEPRECATED void mbedtls_sha256( const unsigned char *input, + size_t ilen, + unsigned char output[32], + int is224 ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief The SHA-224 and SHA-256 checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_sha256_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_sha256.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha512.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha512.h new file mode 100644 index 000000000..c06ceed1d --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/sha512.h @@ -0,0 +1,300 @@ +/** + * \file sha512.h + * \brief This file contains SHA-384 and SHA-512 definitions and functions. + * + * The Secure Hash Algorithms 384 and 512 (SHA-384 and SHA-512) cryptographic + * hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>. + */ +/* + * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of Mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SHA512_H +#define MBEDTLS_SHA512_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +/* MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_SHA512_HW_ACCEL_FAILED -0x0039 /**< SHA-512 hardware accelerator failed */ +#define MBEDTLS_ERR_SHA512_BAD_INPUT_DATA -0x0075 /**< SHA-512 input data was malformed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_SHA512_ALT) +// Regular implementation +// + +/** + * \brief The SHA-512 context structure. + * + * The structure is used both for SHA-384 and for SHA-512 + * checksum calculations. The choice between these two is + * made in the call to mbedtls_sha512_starts_ret(). + */ +typedef struct mbedtls_sha512_context +{ + uint64_t total[2]; /*!< The number of Bytes processed. */ + uint64_t state[8]; /*!< The intermediate digest state. */ + unsigned char buffer[128]; /*!< The data block being processed. */ + int is384; /*!< Determines which function to use: + 0: Use SHA-512, or 1: Use SHA-384. */ +} +mbedtls_sha512_context; + +#else /* MBEDTLS_SHA512_ALT */ +#include "sha512_alt.h" +#endif /* MBEDTLS_SHA512_ALT */ + +/** + * \brief This function initializes a SHA-512 context. + * + * \param ctx The SHA-512 context to initialize. This must + * not be \c NULL. + */ +void mbedtls_sha512_init( mbedtls_sha512_context *ctx ); + +/** + * \brief This function clears a SHA-512 context. + * + * \param ctx The SHA-512 context to clear. This may be \c NULL, + * in which case this function does nothing. If it + * is not \c NULL, it must point to an initialized + * SHA-512 context. + */ +void mbedtls_sha512_free( mbedtls_sha512_context *ctx ); + +/** + * \brief This function clones the state of a SHA-512 context. + * + * \param dst The destination context. This must be initialized. + * \param src The context to clone. This must be initialized. + */ +void mbedtls_sha512_clone( mbedtls_sha512_context *dst, + const mbedtls_sha512_context *src ); + +/** + * \brief This function starts a SHA-384 or SHA-512 checksum + * calculation. + * + * \param ctx The SHA-512 context to use. This must be initialized. + * \param is384 Determines which function to use. This must be + * either \c for SHA-512, or \c 1 for SHA-384. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha512_starts_ret( mbedtls_sha512_context *ctx, int is384 ); + +/** + * \brief This function feeds an input buffer into an ongoing + * SHA-512 checksum calculation. + * + * \param ctx The SHA-512 context. This must be initialized + * and have a hash operation started. + * \param input The buffer holding the input data. This must + * be a readable buffer of length \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha512_update_ret( mbedtls_sha512_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief This function finishes the SHA-512 operation, and writes + * the result to the output buffer. This function is for + * internal use only. + * + * \param ctx The SHA-512 context. This must be initialized + * and have a hash operation started. + * \param output The SHA-384 or SHA-512 checksum result. + * This must be a writable buffer of length \c 64 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha512_finish_ret( mbedtls_sha512_context *ctx, + unsigned char output[64] ); + +/** + * \brief This function processes a single data block within + * the ongoing SHA-512 computation. + * + * \param ctx The SHA-512 context. This must be initialized. + * \param data The buffer holding one block of data. This + * must be a readable buffer of length \c 128 Bytes. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_internal_sha512_process( mbedtls_sha512_context *ctx, + const unsigned char data[128] ); +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif +/** + * \brief This function starts a SHA-384 or SHA-512 checksum + * calculation. + * + * \deprecated Superseded by mbedtls_sha512_starts_ret() in 2.7.0 + * + * \param ctx The SHA-512 context to use. This must be initialized. + * \param is384 Determines which function to use. This must be either + * \c 0 for SHA-512 or \c 1 for SHA-384. + */ +MBEDTLS_DEPRECATED void mbedtls_sha512_starts( mbedtls_sha512_context *ctx, + int is384 ); + +/** + * \brief This function feeds an input buffer into an ongoing + * SHA-512 checksum calculation. + * + * \deprecated Superseded by mbedtls_sha512_update_ret() in 2.7.0. + * + * \param ctx The SHA-512 context. This must be initialized + * and have a hash operation started. + * \param input The buffer holding the data. This must be a readable + * buffer of length \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + */ +MBEDTLS_DEPRECATED void mbedtls_sha512_update( mbedtls_sha512_context *ctx, + const unsigned char *input, + size_t ilen ); + +/** + * \brief This function finishes the SHA-512 operation, and writes + * the result to the output buffer. + * + * \deprecated Superseded by mbedtls_sha512_finish_ret() in 2.7.0. + * + * \param ctx The SHA-512 context. This must be initialized + * and have a hash operation started. + * \param output The SHA-384 or SHA-512 checksum result. This must + * be a writable buffer of size \c 64 Bytes. + */ +MBEDTLS_DEPRECATED void mbedtls_sha512_finish( mbedtls_sha512_context *ctx, + unsigned char output[64] ); + +/** + * \brief This function processes a single data block within + * the ongoing SHA-512 computation. This function is for + * internal use only. + * + * \deprecated Superseded by mbedtls_internal_sha512_process() in 2.7.0. + * + * \param ctx The SHA-512 context. This must be initialized. + * \param data The buffer holding one block of data. This must be + * a readable buffer of length \c 128 Bytes. + */ +MBEDTLS_DEPRECATED void mbedtls_sha512_process( + mbedtls_sha512_context *ctx, + const unsigned char data[128] ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief This function calculates the SHA-512 or SHA-384 + * checksum of a buffer. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The SHA-512 result is calculated as + * output = SHA-512(input buffer). + * + * \param input The buffer holding the input data. This must be + * a readable buffer of length \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + * \param output The SHA-384 or SHA-512 checksum result. + * This must be a writable buffer of length \c 64 Bytes. + * \param is384 Determines which function to use. This must be either + * \c 0 for SHA-512, or \c 1 for SHA-384. + * + * \return \c 0 on success. + * \return A negative error code on failure. + */ +int mbedtls_sha512_ret( const unsigned char *input, + size_t ilen, + unsigned char output[64], + int is384 ); + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif + +/** + * \brief This function calculates the SHA-512 or SHA-384 + * checksum of a buffer. + * + * The function allocates the context, performs the + * calculation, and frees the context. + * + * The SHA-512 result is calculated as + * output = SHA-512(input buffer). + * + * \deprecated Superseded by mbedtls_sha512_ret() in 2.7.0 + * + * \param input The buffer holding the data. This must be a + * readable buffer of length \p ilen Bytes. + * \param ilen The length of the input data in Bytes. + * \param output The SHA-384 or SHA-512 checksum result. This must + * be a writable buffer of length \c 64 Bytes. + * \param is384 Determines which function to use. This must be either + * \c 0 for SHA-512, or \c 1 for SHA-384. + */ +MBEDTLS_DEPRECATED void mbedtls_sha512( const unsigned char *input, + size_t ilen, + unsigned char output[64], + int is384 ); + +#undef MBEDTLS_DEPRECATED +#endif /* !MBEDTLS_DEPRECATED_REMOVED */ + +#if defined(MBEDTLS_SELF_TEST) + + /** + * \brief The SHA-384 or SHA-512 checkup routine. + * + * \return \c 0 on success. + * \return \c 1 on failure. + */ +int mbedtls_sha512_self_test( int verbose ); +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_sha512.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl.h new file mode 100644 index 000000000..d31f6cdd5 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl.h @@ -0,0 +1,3262 @@ +/** + * \file ssl.h + * + * \brief SSL/TLS functions. + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SSL_H +#define MBEDTLS_SSL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "bignum.h" +#include "ecp.h" + +#include "ssl_ciphersuites.h" + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +#include "x509_crt.h" +#include "x509_crl.h" +#endif + +#if defined(MBEDTLS_DHM_C) +#include "dhm.h" +#endif + +#if defined(MBEDTLS_ECDH_C) +#include "ecdh.h" +#endif + +#if defined(MBEDTLS_ZLIB_SUPPORT) + +#if defined(MBEDTLS_DEPRECATED_WARNING) +#warning "Record compression support via MBEDTLS_ZLIB_SUPPORT is deprecated and will be removed in the next major revision of the library" +#endif + +#if defined(MBEDTLS_DEPRECATED_REMOVED) +#error "Record compression support via MBEDTLS_ZLIB_SUPPORT is deprecated and cannot be used if MBEDTLS_DEPRECATED_REMOVED is set" +#endif + +#include "zlib.h" +#endif + +#if defined(MBEDTLS_HAVE_TIME) +#include "platform_time.h" +#endif + +/* + * SSL Error codes + */ +#define MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE -0x7080 /**< The requested feature is not available. */ +#define MBEDTLS_ERR_SSL_BAD_INPUT_DATA -0x7100 /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_SSL_INVALID_MAC -0x7180 /**< Verification of the message MAC failed. */ +#define MBEDTLS_ERR_SSL_INVALID_RECORD -0x7200 /**< An invalid SSL record was received. */ +#define MBEDTLS_ERR_SSL_CONN_EOF -0x7280 /**< The connection indicated an EOF. */ +#define MBEDTLS_ERR_SSL_UNKNOWN_CIPHER -0x7300 /**< An unknown cipher was received. */ +#define MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN -0x7380 /**< The server has no ciphersuites in common with the client. */ +#define MBEDTLS_ERR_SSL_NO_RNG -0x7400 /**< No RNG was provided to the SSL module. */ +#define MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE -0x7480 /**< No client certification received from the client, but required by the authentication mode. */ +#define MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE -0x7500 /**< Our own certificate(s) is/are too large to send in an SSL message. */ +#define MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED -0x7580 /**< The own certificate is not set, but needed by the server. */ +#define MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED -0x7600 /**< The own private key or pre-shared key is not set, but needed. */ +#define MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED -0x7680 /**< No CA Chain is set, but required to operate. */ +#define MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE -0x7700 /**< An unexpected message was received from our peer. */ +#define MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE -0x7780 /**< A fatal alert message was received from our peer. */ +#define MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED -0x7800 /**< Verification of our peer failed. */ +#define MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY -0x7880 /**< The peer notified us that the connection is going to be closed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO -0x7900 /**< Processing of the ClientHello handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO -0x7980 /**< Processing of the ServerHello handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE -0x7A00 /**< Processing of the Certificate handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST -0x7A80 /**< Processing of the CertificateRequest handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE -0x7B00 /**< Processing of the ServerKeyExchange handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE -0x7B80 /**< Processing of the ServerHelloDone handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE -0x7C00 /**< Processing of the ClientKeyExchange handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP -0x7C80 /**< Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS -0x7D00 /**< Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY -0x7D80 /**< Processing of the CertificateVerify handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC -0x7E00 /**< Processing of the ChangeCipherSpec handshake message failed. */ +#define MBEDTLS_ERR_SSL_BAD_HS_FINISHED -0x7E80 /**< Processing of the Finished handshake message failed. */ +#define MBEDTLS_ERR_SSL_ALLOC_FAILED -0x7F00 /**< Memory allocation failed */ +#define MBEDTLS_ERR_SSL_HW_ACCEL_FAILED -0x7F80 /**< Hardware acceleration function returned with error */ +#define MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH -0x6F80 /**< Hardware acceleration function skipped / left alone data */ +#define MBEDTLS_ERR_SSL_COMPRESSION_FAILED -0x6F00 /**< Processing of the compression / decompression failed */ +#define MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION -0x6E80 /**< Handshake protocol not within min/max boundaries */ +#define MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET -0x6E00 /**< Processing of the NewSessionTicket handshake message failed. */ +#define MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED -0x6D80 /**< Session ticket has expired. */ +#define MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH -0x6D00 /**< Public key type mismatch (eg, asked for RSA key exchange and presented EC key) */ +#define MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY -0x6C80 /**< Unknown identity received (eg, PSK identity) */ +#define MBEDTLS_ERR_SSL_INTERNAL_ERROR -0x6C00 /**< Internal error (eg, unexpected failure in lower-level module) */ +#define MBEDTLS_ERR_SSL_COUNTER_WRAPPING -0x6B80 /**< A counter would wrap (eg, too many messages exchanged). */ +#define MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO -0x6B00 /**< Unexpected message at ServerHello in renegotiation. */ +#define MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED -0x6A80 /**< DTLS client must retry for hello verification */ +#define MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL -0x6A00 /**< A buffer is too small to receive or write a message */ +#define MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE -0x6980 /**< None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages). */ +#define MBEDTLS_ERR_SSL_WANT_READ -0x6900 /**< No data of requested type currently available on underlying transport. */ +#define MBEDTLS_ERR_SSL_WANT_WRITE -0x6880 /**< Connection requires a write call. */ +#define MBEDTLS_ERR_SSL_TIMEOUT -0x6800 /**< The operation timed out. */ +#define MBEDTLS_ERR_SSL_CLIENT_RECONNECT -0x6780 /**< The client initiated a reconnect from the same port. */ +#define MBEDTLS_ERR_SSL_UNEXPECTED_RECORD -0x6700 /**< Record header looks valid but is not expected. */ +#define MBEDTLS_ERR_SSL_NON_FATAL -0x6680 /**< The alert message received indicates a non-fatal error. */ +#define MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH -0x6600 /**< Couldn't set the hash for verifying CertificateVerify */ +#define MBEDTLS_ERR_SSL_CONTINUE_PROCESSING -0x6580 /**< Internal-only message signaling that further message-processing should be done */ +#define MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS -0x6500 /**< The asynchronous operation is not completed yet. */ +#define MBEDTLS_ERR_SSL_EARLY_MESSAGE -0x6480 /**< Internal-only message signaling that a message arrived early. */ +#define MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS -0x7000 /**< A cryptographic operation is in progress. Try again later. */ + +/* + * Various constants + */ +#define MBEDTLS_SSL_MAJOR_VERSION_3 3 +#define MBEDTLS_SSL_MINOR_VERSION_0 0 /*!< SSL v3.0 */ +#define MBEDTLS_SSL_MINOR_VERSION_1 1 /*!< TLS v1.0 */ +#define MBEDTLS_SSL_MINOR_VERSION_2 2 /*!< TLS v1.1 */ +#define MBEDTLS_SSL_MINOR_VERSION_3 3 /*!< TLS v1.2 */ + +#define MBEDTLS_SSL_TRANSPORT_STREAM 0 /*!< TLS */ +#define MBEDTLS_SSL_TRANSPORT_DATAGRAM 1 /*!< DTLS */ + +#define MBEDTLS_SSL_MAX_HOST_NAME_LEN 255 /*!< Maximum host name defined in RFC 1035 */ + +/* RFC 6066 section 4, see also mfl_code_to_length in ssl_tls.c + * NONE must be zero so that memset()ing structure to zero works */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_NONE 0 /*!< don't use this extension */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_512 1 /*!< MaxFragmentLength 2^9 */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_1024 2 /*!< MaxFragmentLength 2^10 */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_2048 3 /*!< MaxFragmentLength 2^11 */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_4096 4 /*!< MaxFragmentLength 2^12 */ +#define MBEDTLS_SSL_MAX_FRAG_LEN_INVALID 5 /*!< first invalid value */ + +#define MBEDTLS_SSL_IS_CLIENT 0 +#define MBEDTLS_SSL_IS_SERVER 1 + +#define MBEDTLS_SSL_IS_NOT_FALLBACK 0 +#define MBEDTLS_SSL_IS_FALLBACK 1 + +#define MBEDTLS_SSL_EXTENDED_MS_DISABLED 0 +#define MBEDTLS_SSL_EXTENDED_MS_ENABLED 1 + +#define MBEDTLS_SSL_ETM_DISABLED 0 +#define MBEDTLS_SSL_ETM_ENABLED 1 + +#define MBEDTLS_SSL_COMPRESS_NULL 0 +#define MBEDTLS_SSL_COMPRESS_DEFLATE 1 + +#define MBEDTLS_SSL_VERIFY_NONE 0 +#define MBEDTLS_SSL_VERIFY_OPTIONAL 1 +#define MBEDTLS_SSL_VERIFY_REQUIRED 2 +#define MBEDTLS_SSL_VERIFY_UNSET 3 /* Used only for sni_authmode */ + +#define MBEDTLS_SSL_LEGACY_RENEGOTIATION 0 +#define MBEDTLS_SSL_SECURE_RENEGOTIATION 1 + +#define MBEDTLS_SSL_RENEGOTIATION_DISABLED 0 +#define MBEDTLS_SSL_RENEGOTIATION_ENABLED 1 + +#define MBEDTLS_SSL_ANTI_REPLAY_DISABLED 0 +#define MBEDTLS_SSL_ANTI_REPLAY_ENABLED 1 + +#define MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED -1 +#define MBEDTLS_SSL_RENEGO_MAX_RECORDS_DEFAULT 16 + +#define MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION 0 +#define MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION 1 +#define MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE 2 + +#define MBEDTLS_SSL_TRUNC_HMAC_DISABLED 0 +#define MBEDTLS_SSL_TRUNC_HMAC_ENABLED 1 +#define MBEDTLS_SSL_TRUNCATED_HMAC_LEN 10 /* 80 bits, rfc 6066 section 7 */ + +#define MBEDTLS_SSL_SESSION_TICKETS_DISABLED 0 +#define MBEDTLS_SSL_SESSION_TICKETS_ENABLED 1 + +#define MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED 0 +#define MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED 1 + +#define MBEDTLS_SSL_ARC4_ENABLED 0 +#define MBEDTLS_SSL_ARC4_DISABLED 1 + +#define MBEDTLS_SSL_PRESET_DEFAULT 0 +#define MBEDTLS_SSL_PRESET_SUITEB 2 + +#define MBEDTLS_SSL_CERT_REQ_CA_LIST_ENABLED 1 +#define MBEDTLS_SSL_CERT_REQ_CA_LIST_DISABLED 0 + +/* + * Default range for DTLS retransmission timer value, in milliseconds. + * RFC 6347 4.2.4.1 says from 1 second to 60 seconds. + */ +#define MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MIN 1000 +#define MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MAX 60000 + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ + +#if !defined(MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME) +#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ +#endif + +/* + * Maximum fragment length in bytes, + * determines the size of each of the two internal I/O buffers. + * + * Note: the RFC defines the default size of SSL / TLS messages. If you + * change the value here, other clients / servers may not be able to + * communicate with you anymore. Only change this value if you control + * both sides of the connection and have it reduced at both sides, or + * if you're using the Max Fragment Length extension and you know all your + * peers are using it too! + */ +#if !defined(MBEDTLS_SSL_MAX_CONTENT_LEN) +#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */ +#endif + +#if !defined(MBEDTLS_SSL_IN_CONTENT_LEN) +#define MBEDTLS_SSL_IN_CONTENT_LEN MBEDTLS_SSL_MAX_CONTENT_LEN +#endif + +#if !defined(MBEDTLS_SSL_OUT_CONTENT_LEN) +#define MBEDTLS_SSL_OUT_CONTENT_LEN MBEDTLS_SSL_MAX_CONTENT_LEN +#endif + +/* + * Maximum number of heap-allocated bytes for the purpose of + * DTLS handshake message reassembly and future message buffering. + */ +#if !defined(MBEDTLS_SSL_DTLS_MAX_BUFFERING) +#define MBEDTLS_SSL_DTLS_MAX_BUFFERING 32768 +#endif + +/* \} name SECTION: Module settings */ + +/* + * Length of the verify data for secure renegotiation + */ +#if defined(MBEDTLS_SSL_PROTO_SSL3) +#define MBEDTLS_SSL_VERIFY_DATA_MAX_LEN 36 +#else +#define MBEDTLS_SSL_VERIFY_DATA_MAX_LEN 12 +#endif + +/* + * Signaling ciphersuite values (SCSV) + */ +#define MBEDTLS_SSL_EMPTY_RENEGOTIATION_INFO 0xFF /**< renegotiation info ext */ +#define MBEDTLS_SSL_FALLBACK_SCSV_VALUE 0x5600 /**< RFC 7507 section 2 */ + +/* + * Supported Signature and Hash algorithms (For TLS 1.2) + * RFC 5246 section 7.4.1.4.1 + */ +#define MBEDTLS_SSL_HASH_NONE 0 +#define MBEDTLS_SSL_HASH_MD5 1 +#define MBEDTLS_SSL_HASH_SHA1 2 +#define MBEDTLS_SSL_HASH_SHA224 3 +#define MBEDTLS_SSL_HASH_SHA256 4 +#define MBEDTLS_SSL_HASH_SHA384 5 +#define MBEDTLS_SSL_HASH_SHA512 6 + +#define MBEDTLS_SSL_SIG_ANON 0 +#define MBEDTLS_SSL_SIG_RSA 1 +#define MBEDTLS_SSL_SIG_ECDSA 3 + +/* + * Client Certificate Types + * RFC 5246 section 7.4.4 plus RFC 4492 section 5.5 + */ +#define MBEDTLS_SSL_CERT_TYPE_RSA_SIGN 1 +#define MBEDTLS_SSL_CERT_TYPE_ECDSA_SIGN 64 + +/* + * Message, alert and handshake types + */ +#define MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC 20 +#define MBEDTLS_SSL_MSG_ALERT 21 +#define MBEDTLS_SSL_MSG_HANDSHAKE 22 +#define MBEDTLS_SSL_MSG_APPLICATION_DATA 23 + +#define MBEDTLS_SSL_ALERT_LEVEL_WARNING 1 +#define MBEDTLS_SSL_ALERT_LEVEL_FATAL 2 + +#define MBEDTLS_SSL_ALERT_MSG_CLOSE_NOTIFY 0 /* 0x00 */ +#define MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE 10 /* 0x0A */ +#define MBEDTLS_SSL_ALERT_MSG_BAD_RECORD_MAC 20 /* 0x14 */ +#define MBEDTLS_SSL_ALERT_MSG_DECRYPTION_FAILED 21 /* 0x15 */ +#define MBEDTLS_SSL_ALERT_MSG_RECORD_OVERFLOW 22 /* 0x16 */ +#define MBEDTLS_SSL_ALERT_MSG_DECOMPRESSION_FAILURE 30 /* 0x1E */ +#define MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE 40 /* 0x28 */ +#define MBEDTLS_SSL_ALERT_MSG_NO_CERT 41 /* 0x29 */ +#define MBEDTLS_SSL_ALERT_MSG_BAD_CERT 42 /* 0x2A */ +#define MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT 43 /* 0x2B */ +#define MBEDTLS_SSL_ALERT_MSG_CERT_REVOKED 44 /* 0x2C */ +#define MBEDTLS_SSL_ALERT_MSG_CERT_EXPIRED 45 /* 0x2D */ +#define MBEDTLS_SSL_ALERT_MSG_CERT_UNKNOWN 46 /* 0x2E */ +#define MBEDTLS_SSL_ALERT_MSG_ILLEGAL_PARAMETER 47 /* 0x2F */ +#define MBEDTLS_SSL_ALERT_MSG_UNKNOWN_CA 48 /* 0x30 */ +#define MBEDTLS_SSL_ALERT_MSG_ACCESS_DENIED 49 /* 0x31 */ +#define MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR 50 /* 0x32 */ +#define MBEDTLS_SSL_ALERT_MSG_DECRYPT_ERROR 51 /* 0x33 */ +#define MBEDTLS_SSL_ALERT_MSG_EXPORT_RESTRICTION 60 /* 0x3C */ +#define MBEDTLS_SSL_ALERT_MSG_PROTOCOL_VERSION 70 /* 0x46 */ +#define MBEDTLS_SSL_ALERT_MSG_INSUFFICIENT_SECURITY 71 /* 0x47 */ +#define MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR 80 /* 0x50 */ +#define MBEDTLS_SSL_ALERT_MSG_INAPROPRIATE_FALLBACK 86 /* 0x56 */ +#define MBEDTLS_SSL_ALERT_MSG_USER_CANCELED 90 /* 0x5A */ +#define MBEDTLS_SSL_ALERT_MSG_NO_RENEGOTIATION 100 /* 0x64 */ +#define MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_EXT 110 /* 0x6E */ +#define MBEDTLS_SSL_ALERT_MSG_UNRECOGNIZED_NAME 112 /* 0x70 */ +#define MBEDTLS_SSL_ALERT_MSG_UNKNOWN_PSK_IDENTITY 115 /* 0x73 */ +#define MBEDTLS_SSL_ALERT_MSG_NO_APPLICATION_PROTOCOL 120 /* 0x78 */ + +#define MBEDTLS_SSL_HS_HELLO_REQUEST 0 +#define MBEDTLS_SSL_HS_CLIENT_HELLO 1 +#define MBEDTLS_SSL_HS_SERVER_HELLO 2 +#define MBEDTLS_SSL_HS_HELLO_VERIFY_REQUEST 3 +#define MBEDTLS_SSL_HS_NEW_SESSION_TICKET 4 +#define MBEDTLS_SSL_HS_CERTIFICATE 11 +#define MBEDTLS_SSL_HS_SERVER_KEY_EXCHANGE 12 +#define MBEDTLS_SSL_HS_CERTIFICATE_REQUEST 13 +#define MBEDTLS_SSL_HS_SERVER_HELLO_DONE 14 +#define MBEDTLS_SSL_HS_CERTIFICATE_VERIFY 15 +#define MBEDTLS_SSL_HS_CLIENT_KEY_EXCHANGE 16 +#define MBEDTLS_SSL_HS_FINISHED 20 + +/* + * TLS extensions + */ +#define MBEDTLS_TLS_EXT_SERVERNAME 0 +#define MBEDTLS_TLS_EXT_SERVERNAME_HOSTNAME 0 + +#define MBEDTLS_TLS_EXT_MAX_FRAGMENT_LENGTH 1 + +#define MBEDTLS_TLS_EXT_TRUNCATED_HMAC 4 + +#define MBEDTLS_TLS_EXT_SUPPORTED_ELLIPTIC_CURVES 10 +#define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS 11 + +#define MBEDTLS_TLS_EXT_SIG_ALG 13 + +#define MBEDTLS_TLS_EXT_ALPN 16 + +#define MBEDTLS_TLS_EXT_ENCRYPT_THEN_MAC 22 /* 0x16 */ +#define MBEDTLS_TLS_EXT_EXTENDED_MASTER_SECRET 0x0017 /* 23 */ + +#define MBEDTLS_TLS_EXT_SESSION_TICKET 35 + +#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP 256 /* experimental */ + +#define MBEDTLS_TLS_EXT_RENEGOTIATION_INFO 0xFF01 + +/* + * Size defines + */ +#if !defined(MBEDTLS_PSK_MAX_LEN) +#define MBEDTLS_PSK_MAX_LEN 32 /* 256 bits */ +#endif + +/* Dummy type used only for its size */ +union mbedtls_ssl_premaster_secret +{ +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) + unsigned char _pms_rsa[48]; /* RFC 5246 8.1.1 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) + unsigned char _pms_dhm[MBEDTLS_MPI_MAX_SIZE]; /* RFC 5246 8.1.2 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) + unsigned char _pms_ecdh[MBEDTLS_ECP_MAX_BYTES]; /* RFC 4492 5.10 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED) + unsigned char _pms_psk[4 + 2 * MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 2 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) + unsigned char _pms_dhe_psk[4 + MBEDTLS_MPI_MAX_SIZE + + MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 3 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) + unsigned char _pms_rsa_psk[52 + MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 4 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) + unsigned char _pms_ecdhe_psk[4 + MBEDTLS_ECP_MAX_BYTES + + MBEDTLS_PSK_MAX_LEN]; /* RFC 5489 2 */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) + unsigned char _pms_ecjpake[32]; /* Thread spec: SHA-256 output */ +#endif +}; + +#define MBEDTLS_PREMASTER_SIZE sizeof( union mbedtls_ssl_premaster_secret ) + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * SSL state machine + */ +typedef enum +{ + MBEDTLS_SSL_HELLO_REQUEST, + MBEDTLS_SSL_CLIENT_HELLO, + MBEDTLS_SSL_SERVER_HELLO, + MBEDTLS_SSL_SERVER_CERTIFICATE, + MBEDTLS_SSL_SERVER_KEY_EXCHANGE, + MBEDTLS_SSL_CERTIFICATE_REQUEST, + MBEDTLS_SSL_SERVER_HELLO_DONE, + MBEDTLS_SSL_CLIENT_CERTIFICATE, + MBEDTLS_SSL_CLIENT_KEY_EXCHANGE, + MBEDTLS_SSL_CERTIFICATE_VERIFY, + MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC, + MBEDTLS_SSL_CLIENT_FINISHED, + MBEDTLS_SSL_SERVER_CHANGE_CIPHER_SPEC, + MBEDTLS_SSL_SERVER_FINISHED, + MBEDTLS_SSL_FLUSH_BUFFERS, + MBEDTLS_SSL_HANDSHAKE_WRAPUP, + MBEDTLS_SSL_HANDSHAKE_OVER, + MBEDTLS_SSL_SERVER_NEW_SESSION_TICKET, + MBEDTLS_SSL_SERVER_HELLO_VERIFY_REQUEST_SENT, +} +mbedtls_ssl_states; + +/** + * \brief Callback type: send data on the network. + * + * \note That callback may be either blocking or non-blocking. + * + * \param ctx Context for the send callback (typically a file descriptor) + * \param buf Buffer holding the data to send + * \param len Length of the data to send + * + * \return The callback must return the number of bytes sent if any, + * or a non-zero error code. + * If performing non-blocking I/O, \c MBEDTLS_ERR_SSL_WANT_WRITE + * must be returned when the operation would block. + * + * \note The callback is allowed to send fewer bytes than requested. + * It must always return the number of bytes actually sent. + */ +typedef int mbedtls_ssl_send_t( void *ctx, + const unsigned char *buf, + size_t len ); + +/** + * \brief Callback type: receive data from the network. + * + * \note That callback may be either blocking or non-blocking. + * + * \param ctx Context for the receive callback (typically a file + * descriptor) + * \param buf Buffer to write the received data to + * \param len Length of the receive buffer + * + * \return The callback must return the number of bytes received, + * or a non-zero error code. + * If performing non-blocking I/O, \c MBEDTLS_ERR_SSL_WANT_READ + * must be returned when the operation would block. + * + * \note The callback may receive fewer bytes than the length of the + * buffer. It must always return the number of bytes actually + * received and written to the buffer. + */ +typedef int mbedtls_ssl_recv_t( void *ctx, + unsigned char *buf, + size_t len ); + +/** + * \brief Callback type: receive data from the network, with timeout + * + * \note That callback must block until data is received, or the + * timeout delay expires, or the operation is interrupted by a + * signal. + * + * \param ctx Context for the receive callback (typically a file descriptor) + * \param buf Buffer to write the received data to + * \param len Length of the receive buffer + * \param timeout Maximum nomber of millisecondes to wait for data + * 0 means no timeout (potentially waiting forever) + * + * \return The callback must return the number of bytes received, + * or a non-zero error code: + * \c MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out, + * \c MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal. + * + * \note The callback may receive fewer bytes than the length of the + * buffer. It must always return the number of bytes actually + * received and written to the buffer. + */ +typedef int mbedtls_ssl_recv_timeout_t( void *ctx, + unsigned char *buf, + size_t len, + uint32_t timeout ); +/** + * \brief Callback type: set a pair of timers/delays to watch + * + * \param ctx Context pointer + * \param int_ms Intermediate delay in milliseconds + * \param fin_ms Final delay in milliseconds + * 0 cancels the current timer. + * + * \note This callback must at least store the necessary information + * for the associated \c mbedtls_ssl_get_timer_t callback to + * return correct information. + * + * \note If using a event-driven style of programming, an event must + * be generated when the final delay is passed. The event must + * cause a call to \c mbedtls_ssl_handshake() with the proper + * SSL context to be scheduled. Care must be taken to ensure + * that at most one such call happens at a time. + * + * \note Only one timer at a time must be running. Calling this + * function while a timer is running must cancel it. Cancelled + * timers must not generate any event. + */ +typedef void mbedtls_ssl_set_timer_t( void * ctx, + uint32_t int_ms, + uint32_t fin_ms ); + +/** + * \brief Callback type: get status of timers/delays + * + * \param ctx Context pointer + * + * \return This callback must return: + * -1 if cancelled (fin_ms == 0), + * 0 if none of the delays have passed, + * 1 if only the intermediate delay has passed, + * 2 if the final delay has passed. + */ +typedef int mbedtls_ssl_get_timer_t( void * ctx ); + +/* Defined below */ +typedef struct mbedtls_ssl_session mbedtls_ssl_session; +typedef struct mbedtls_ssl_context mbedtls_ssl_context; +typedef struct mbedtls_ssl_config mbedtls_ssl_config; + +/* Defined in ssl_internal.h */ +typedef struct mbedtls_ssl_transform mbedtls_ssl_transform; +typedef struct mbedtls_ssl_handshake_params mbedtls_ssl_handshake_params; +typedef struct mbedtls_ssl_sig_hash_set_t mbedtls_ssl_sig_hash_set_t; +#if defined(MBEDTLS_X509_CRT_PARSE_C) +typedef struct mbedtls_ssl_key_cert mbedtls_ssl_key_cert; +#endif +#if defined(MBEDTLS_SSL_PROTO_DTLS) +typedef struct mbedtls_ssl_flight_item mbedtls_ssl_flight_item; +#endif + +#if defined(MBEDTLS_SSL_ASYNC_PRIVATE) +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Callback type: start external signature operation. + * + * This callback is called during an SSL handshake to start + * a signature decryption operation using an + * external processor. The parameter \p cert contains + * the public key; it is up to the callback function to + * determine how to access the associated private key. + * + * This function typically sends or enqueues a request, and + * does not wait for the operation to complete. This allows + * the handshake step to be non-blocking. + * + * The parameters \p ssl and \p cert are guaranteed to remain + * valid throughout the handshake. On the other hand, this + * function must save the contents of \p hash if the value + * is needed for later processing, because the \p hash buffer + * is no longer valid after this function returns. + * + * This function may call mbedtls_ssl_set_async_operation_data() + * to store an operation context for later retrieval + * by the resume or cancel callback. + * + * \note For RSA signatures, this function must produce output + * that is consistent with PKCS#1 v1.5 in the same way as + * mbedtls_rsa_pkcs1_sign(). Before the private key operation, + * apply the padding steps described in RFC 8017, section 9.2 + * "EMSA-PKCS1-v1_5" as follows. + * - If \p md_alg is #MBEDTLS_MD_NONE, apply the PKCS#1 v1.5 + * encoding, treating \p hash as the DigestInfo to be + * padded. In other words, apply EMSA-PKCS1-v1_5 starting + * from step 3, with `T = hash` and `tLen = hash_len`. + * - If `md_alg != MBEDTLS_MD_NONE`, apply the PKCS#1 v1.5 + * encoding, treating \p hash as the hash to be encoded and + * padded. In other words, apply EMSA-PKCS1-v1_5 starting + * from step 2, with `digestAlgorithm` obtained by calling + * mbedtls_oid_get_oid_by_md() on \p md_alg. + * + * \note For ECDSA signatures, the output format is the DER encoding + * `Ecdsa-Sig-Value` defined in + * [RFC 4492 section 5.4](https://tools.ietf.org/html/rfc4492#section-5.4). + * + * \param ssl The SSL connection instance. It should not be + * modified other than via + * mbedtls_ssl_set_async_operation_data(). + * \param cert Certificate containing the public key. + * In simple cases, this is one of the pointers passed to + * mbedtls_ssl_conf_own_cert() when configuring the SSL + * connection. However, if other callbacks are used, this + * property may not hold. For example, if an SNI callback + * is registered with mbedtls_ssl_conf_sni(), then + * this callback determines what certificate is used. + * \param md_alg Hash algorithm. + * \param hash Buffer containing the hash. This buffer is + * no longer valid when the function returns. + * \param hash_len Size of the \c hash buffer in bytes. + * + * \return 0 if the operation was started successfully and the SSL + * stack should call the resume callback immediately. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation + * was started successfully and the SSL stack should return + * immediately without calling the resume callback yet. + * \return #MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH if the external + * processor does not support this key. The SSL stack will + * use the private key object instead. + * \return Any other error indicates a fatal failure and is + * propagated up the call chain. The callback should + * use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b> + * use \c MBEDTLS_ERR_SSL_xxx error codes except as + * directed in the documentation of this callback. + */ +typedef int mbedtls_ssl_async_sign_t( mbedtls_ssl_context *ssl, + mbedtls_x509_crt *cert, + mbedtls_md_type_t md_alg, + const unsigned char *hash, + size_t hash_len ); + +/** + * \brief Callback type: start external decryption operation. + * + * This callback is called during an SSL handshake to start + * an RSA decryption operation using an + * external processor. The parameter \p cert contains + * the public key; it is up to the callback function to + * determine how to access the associated private key. + * + * This function typically sends or enqueues a request, and + * does not wait for the operation to complete. This allows + * the handshake step to be non-blocking. + * + * The parameters \p ssl and \p cert are guaranteed to remain + * valid throughout the handshake. On the other hand, this + * function must save the contents of \p input if the value + * is needed for later processing, because the \p input buffer + * is no longer valid after this function returns. + * + * This function may call mbedtls_ssl_set_async_operation_data() + * to store an operation context for later retrieval + * by the resume or cancel callback. + * + * \warning RSA decryption as used in TLS is subject to a potential + * timing side channel attack first discovered by Bleichenbacher + * in 1998. This attack can be remotely exploitable + * in practice. To avoid this attack, you must ensure that + * if the callback performs an RSA decryption, the time it + * takes to execute and return the result does not depend + * on whether the RSA decryption succeeded or reported + * invalid padding. + * + * \param ssl The SSL connection instance. It should not be + * modified other than via + * mbedtls_ssl_set_async_operation_data(). + * \param cert Certificate containing the public key. + * In simple cases, this is one of the pointers passed to + * mbedtls_ssl_conf_own_cert() when configuring the SSL + * connection. However, if other callbacks are used, this + * property may not hold. For example, if an SNI callback + * is registered with mbedtls_ssl_conf_sni(), then + * this callback determines what certificate is used. + * \param input Buffer containing the input ciphertext. This buffer + * is no longer valid when the function returns. + * \param input_len Size of the \p input buffer in bytes. + * + * \return 0 if the operation was started successfully and the SSL + * stack should call the resume callback immediately. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation + * was started successfully and the SSL stack should return + * immediately without calling the resume callback yet. + * \return #MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH if the external + * processor does not support this key. The SSL stack will + * use the private key object instead. + * \return Any other error indicates a fatal failure and is + * propagated up the call chain. The callback should + * use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b> + * use \c MBEDTLS_ERR_SSL_xxx error codes except as + * directed in the documentation of this callback. + */ +typedef int mbedtls_ssl_async_decrypt_t( mbedtls_ssl_context *ssl, + mbedtls_x509_crt *cert, + const unsigned char *input, + size_t input_len ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +/** + * \brief Callback type: resume external operation. + * + * This callback is called during an SSL handshake to resume + * an external operation started by the + * ::mbedtls_ssl_async_sign_t or + * ::mbedtls_ssl_async_decrypt_t callback. + * + * This function typically checks the status of a pending + * request or causes the request queue to make progress, and + * does not wait for the operation to complete. This allows + * the handshake step to be non-blocking. + * + * This function may call mbedtls_ssl_get_async_operation_data() + * to retrieve an operation context set by the start callback. + * It may call mbedtls_ssl_set_async_operation_data() to modify + * this context. + * + * Note that when this function returns a status other than + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, it must free any + * resources associated with the operation. + * + * \param ssl The SSL connection instance. It should not be + * modified other than via + * mbedtls_ssl_set_async_operation_data(). + * \param output Buffer containing the output (signature or decrypted + * data) on success. + * \param output_len On success, number of bytes written to \p output. + * \param output_size Size of the \p output buffer in bytes. + * + * \return 0 if output of the operation is available in the + * \p output buffer. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if the operation + * is still in progress. Subsequent requests for progress + * on the SSL connection will call the resume callback + * again. + * \return Any other error means that the operation is aborted. + * The SSL handshake is aborted. The callback should + * use \c MBEDTLS_ERR_PK_xxx error codes, and <b>must not</b> + * use \c MBEDTLS_ERR_SSL_xxx error codes except as + * directed in the documentation of this callback. + */ +typedef int mbedtls_ssl_async_resume_t( mbedtls_ssl_context *ssl, + unsigned char *output, + size_t *output_len, + size_t output_size ); + +/** + * \brief Callback type: cancel external operation. + * + * This callback is called if an SSL connection is closed + * while an asynchronous operation is in progress. Note that + * this callback is not called if the + * ::mbedtls_ssl_async_resume_t callback has run and has + * returned a value other than + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, since in that case + * the asynchronous operation has already completed. + * + * This function may call mbedtls_ssl_get_async_operation_data() + * to retrieve an operation context set by the start callback. + * + * \param ssl The SSL connection instance. It should not be + * modified. + */ +typedef void mbedtls_ssl_async_cancel_t( mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ + +/* + * This structure is used for storing current session data. + */ +struct mbedtls_ssl_session +{ +#if defined(MBEDTLS_HAVE_TIME) + mbedtls_time_t start; /*!< starting time */ +#endif + int ciphersuite; /*!< chosen ciphersuite */ + int compression; /*!< chosen compression */ + size_t id_len; /*!< session id length */ + unsigned char id[32]; /*!< session identifier */ + unsigned char master[48]; /*!< the master secret */ + +#if defined(MBEDTLS_X509_CRT_PARSE_C) + mbedtls_x509_crt *peer_cert; /*!< peer X.509 cert chain */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + uint32_t verify_result; /*!< verification result */ + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C) + unsigned char *ticket; /*!< RFC 5077 session ticket */ + size_t ticket_len; /*!< session ticket length */ + uint32_t ticket_lifetime; /*!< ticket lifetime hint */ +#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */ + +#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) + unsigned char mfl_code; /*!< MaxFragmentLength negotiated by peer */ +#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ + +#if defined(MBEDTLS_SSL_TRUNCATED_HMAC) + int trunc_hmac; /*!< flag for truncated hmac activation */ +#endif /* MBEDTLS_SSL_TRUNCATED_HMAC */ + +#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) + int encrypt_then_mac; /*!< flag for EtM activation */ +#endif +}; + +/** + * SSL/TLS configuration to be shared between mbedtls_ssl_context structures. + */ +struct mbedtls_ssl_config +{ + /* Group items by size (largest first) to minimize padding overhead */ + + /* + * Pointers + */ + + const int *ciphersuite_list[4]; /*!< allowed ciphersuites per version */ + + /** Callback for printing debug output */ + void (*f_dbg)(void *, int, const char *, int, const char *); + void *p_dbg; /*!< context for the debug function */ + + /** Callback for getting (pseudo-)random numbers */ + int (*f_rng)(void *, unsigned char *, size_t); + void *p_rng; /*!< context for the RNG function */ + + /** Callback to retrieve a session from the cache */ + int (*f_get_cache)(void *, mbedtls_ssl_session *); + /** Callback to store a session into the cache */ + int (*f_set_cache)(void *, const mbedtls_ssl_session *); + void *p_cache; /*!< context for cache callbacks */ + +#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) + /** Callback for setting cert according to SNI extension */ + int (*f_sni)(void *, mbedtls_ssl_context *, const unsigned char *, size_t); + void *p_sni; /*!< context for SNI callback */ +#endif + +#if defined(MBEDTLS_X509_CRT_PARSE_C) + /** Callback to customize X.509 certificate chain verification */ + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *); + void *p_vrfy; /*!< context for X.509 verify calllback */ +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) + /** Callback to retrieve PSK key from identity */ + int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *, size_t); + void *p_psk; /*!< context for PSK callback */ +#endif + +#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) + /** Callback to create & write a cookie for ClientHello veirifcation */ + int (*f_cookie_write)( void *, unsigned char **, unsigned char *, + const unsigned char *, size_t ); + /** Callback to verify validity of a ClientHello cookie */ + int (*f_cookie_check)( void *, const unsigned char *, size_t, + const unsigned char *, size_t ); + void *p_cookie; /*!< context for the cookie callbacks */ +#endif + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_SRV_C) + /** Callback to create & write a session ticket */ + int (*f_ticket_write)( void *, const mbedtls_ssl_session *, + unsigned char *, const unsigned char *, size_t *, uint32_t * ); + /** Callback to parse a session ticket into a session structure */ + int (*f_ticket_parse)( void *, mbedtls_ssl_session *, unsigned char *, size_t); + void *p_ticket; /*!< context for the ticket callbacks */ +#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_EXPORT_KEYS) + /** Callback to export key block and master secret */ + int (*f_export_keys)( void *, const unsigned char *, + const unsigned char *, size_t, size_t, size_t ); + void *p_export_keys; /*!< context for key export callback */ +#endif + +#if defined(MBEDTLS_X509_CRT_PARSE_C) + const mbedtls_x509_crt_profile *cert_profile; /*!< verification profile */ + mbedtls_ssl_key_cert *key_cert; /*!< own certificate/key pair(s) */ + mbedtls_x509_crt *ca_chain; /*!< trusted CAs */ + mbedtls_x509_crl *ca_crl; /*!< trusted CAs CRLs */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_ASYNC_PRIVATE) +#if defined(MBEDTLS_X509_CRT_PARSE_C) + mbedtls_ssl_async_sign_t *f_async_sign_start; /*!< start asynchronous signature operation */ + mbedtls_ssl_async_decrypt_t *f_async_decrypt_start; /*!< start asynchronous decryption operation */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + mbedtls_ssl_async_resume_t *f_async_resume; /*!< resume asynchronous operation */ + mbedtls_ssl_async_cancel_t *f_async_cancel; /*!< cancel asynchronous operation */ + void *p_async_config_data; /*!< Configuration data set by mbedtls_ssl_conf_async_private_cb(). */ +#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ + +#if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) + const int *sig_hashes; /*!< allowed signature hashes */ +#endif + +#if defined(MBEDTLS_ECP_C) + const mbedtls_ecp_group_id *curve_list; /*!< allowed curves */ +#endif + +#if defined(MBEDTLS_DHM_C) + mbedtls_mpi dhm_P; /*!< prime modulus for DHM */ + mbedtls_mpi dhm_G; /*!< generator for DHM */ +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) + unsigned char *psk; /*!< pre-shared key. This field should + only be set via + mbedtls_ssl_conf_psk() */ + size_t psk_len; /*!< length of the pre-shared key. This + field should only be set via + mbedtls_ssl_conf_psk() */ + unsigned char *psk_identity; /*!< identity for PSK negotiation. This + field should only be set via + mbedtls_ssl_conf_psk() */ + size_t psk_identity_len;/*!< length of identity. This field should + only be set via + mbedtls_ssl_conf_psk() */ +#endif + +#if defined(MBEDTLS_SSL_ALPN) + const char **alpn_list; /*!< ordered list of protocols */ +#endif + + /* + * Numerical settings (int then char) + */ + + uint32_t read_timeout; /*!< timeout for mbedtls_ssl_read (ms) */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + uint32_t hs_timeout_min; /*!< initial value of the handshake + retransmission timeout (ms) */ + uint32_t hs_timeout_max; /*!< maximum value of the handshake + retransmission timeout (ms) */ +#endif + +#if defined(MBEDTLS_SSL_RENEGOTIATION) + int renego_max_records; /*!< grace period for renegotiation */ + unsigned char renego_period[8]; /*!< value of the record counters + that triggers renegotiation */ +#endif + +#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) + unsigned int badmac_limit; /*!< limit of records with a bad MAC */ +#endif + +#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C) + unsigned int dhm_min_bitlen; /*!< min. bit length of the DHM prime */ +#endif + + unsigned char max_major_ver; /*!< max. major version used */ + unsigned char max_minor_ver; /*!< max. minor version used */ + unsigned char min_major_ver; /*!< min. major version used */ + unsigned char min_minor_ver; /*!< min. minor version used */ + + /* + * Flags (bitfields) + */ + + unsigned int endpoint : 1; /*!< 0: client, 1: server */ + unsigned int transport : 1; /*!< stream (TLS) or datagram (DTLS) */ + unsigned int authmode : 2; /*!< MBEDTLS_SSL_VERIFY_XXX */ + /* needed even with renego disabled for LEGACY_BREAK_HANDSHAKE */ + unsigned int allow_legacy_renegotiation : 2 ; /*!< MBEDTLS_LEGACY_XXX */ +#if defined(MBEDTLS_ARC4_C) + unsigned int arc4_disabled : 1; /*!< blacklist RC4 ciphersuites? */ +#endif +#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) + unsigned int mfl_code : 3; /*!< desired fragment length */ +#endif +#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) + unsigned int encrypt_then_mac : 1 ; /*!< negotiate encrypt-then-mac? */ +#endif +#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) + unsigned int extended_ms : 1; /*!< negotiate extended master secret? */ +#endif +#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) + unsigned int anti_replay : 1; /*!< detect and prevent replay? */ +#endif +#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) + unsigned int cbc_record_splitting : 1; /*!< do cbc record splitting */ +#endif +#if defined(MBEDTLS_SSL_RENEGOTIATION) + unsigned int disable_renegotiation : 1; /*!< disable renegotiation? */ +#endif +#if defined(MBEDTLS_SSL_TRUNCATED_HMAC) + unsigned int trunc_hmac : 1; /*!< negotiate truncated hmac? */ +#endif +#if defined(MBEDTLS_SSL_SESSION_TICKETS) + unsigned int session_tickets : 1; /*!< use session tickets? */ +#endif +#if defined(MBEDTLS_SSL_FALLBACK_SCSV) && defined(MBEDTLS_SSL_CLI_C) + unsigned int fallback : 1; /*!< is this a fallback? */ +#endif +#if defined(MBEDTLS_SSL_SRV_C) + unsigned int cert_req_ca_list : 1; /*!< enable sending CA list in + Certificate Request messages? */ +#endif +}; + + +struct mbedtls_ssl_context +{ + const mbedtls_ssl_config *conf; /*!< configuration information */ + + /* + * Miscellaneous + */ + int state; /*!< SSL handshake: current state */ +#if defined(MBEDTLS_SSL_RENEGOTIATION) + int renego_status; /*!< Initial, in progress, pending? */ + int renego_records_seen; /*!< Records since renego request, or with DTLS, + number of retransmissions of request if + renego_max_records is < 0 */ +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + + int major_ver; /*!< equal to MBEDTLS_SSL_MAJOR_VERSION_3 */ + int minor_ver; /*!< either 0 (SSL3) or 1 (TLS1.0) */ + +#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) + unsigned badmac_seen; /*!< records with a bad MAC received */ +#endif /* MBEDTLS_SSL_DTLS_BADMAC_LIMIT */ + + mbedtls_ssl_send_t *f_send; /*!< Callback for network send */ + mbedtls_ssl_recv_t *f_recv; /*!< Callback for network receive */ + mbedtls_ssl_recv_timeout_t *f_recv_timeout; + /*!< Callback for network receive with timeout */ + + void *p_bio; /*!< context for I/O operations */ + + /* + * Session layer + */ + mbedtls_ssl_session *session_in; /*!< current session data (in) */ + mbedtls_ssl_session *session_out; /*!< current session data (out) */ + mbedtls_ssl_session *session; /*!< negotiated session data */ + mbedtls_ssl_session *session_negotiate; /*!< session data in negotiation */ + + mbedtls_ssl_handshake_params *handshake; /*!< params required only during + the handshake process */ + + /* + * Record layer transformations + */ + mbedtls_ssl_transform *transform_in; /*!< current transform params (in) */ + mbedtls_ssl_transform *transform_out; /*!< current transform params (in) */ + mbedtls_ssl_transform *transform; /*!< negotiated transform params */ + mbedtls_ssl_transform *transform_negotiate; /*!< transform params in negotiation */ + + /* + * Timers + */ + void *p_timer; /*!< context for the timer callbacks */ + + mbedtls_ssl_set_timer_t *f_set_timer; /*!< set timer callback */ + mbedtls_ssl_get_timer_t *f_get_timer; /*!< get timer callback */ + + /* + * Record layer (incoming data) + */ + unsigned char *in_buf; /*!< input buffer */ + unsigned char *in_ctr; /*!< 64-bit incoming message counter + TLS: maintained by us + DTLS: read from peer */ + unsigned char *in_hdr; /*!< start of record header */ + unsigned char *in_len; /*!< two-bytes message length field */ + unsigned char *in_iv; /*!< ivlen-byte IV */ + unsigned char *in_msg; /*!< message contents (in_iv+ivlen) */ + unsigned char *in_offt; /*!< read offset in application data */ + + int in_msgtype; /*!< record header: message type */ + size_t in_msglen; /*!< record header: message length */ + size_t in_left; /*!< amount of data read so far */ +#if defined(MBEDTLS_SSL_PROTO_DTLS) + uint16_t in_epoch; /*!< DTLS epoch for incoming records */ + size_t next_record_offset; /*!< offset of the next record in datagram + (equal to in_left if none) */ +#endif /* MBEDTLS_SSL_PROTO_DTLS */ +#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) + uint64_t in_window_top; /*!< last validated record seq_num */ + uint64_t in_window; /*!< bitmask for replay detection */ +#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */ + + size_t in_hslen; /*!< current handshake message length, + including the handshake header */ + int nb_zero; /*!< # of 0-length encrypted messages */ + + int keep_current_message; /*!< drop or reuse current message + on next call to record layer? */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + uint8_t disable_datagram_packing; /*!< Disable packing multiple records + * within a single datagram. */ +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + + /* + * Record layer (outgoing data) + */ + unsigned char *out_buf; /*!< output buffer */ + unsigned char *out_ctr; /*!< 64-bit outgoing message counter */ + unsigned char *out_hdr; /*!< start of record header */ + unsigned char *out_len; /*!< two-bytes message length field */ + unsigned char *out_iv; /*!< ivlen-byte IV */ + unsigned char *out_msg; /*!< message contents (out_iv+ivlen) */ + + int out_msgtype; /*!< record header: message type */ + size_t out_msglen; /*!< record header: message length */ + size_t out_left; /*!< amount of data not yet written */ + + unsigned char cur_out_ctr[8]; /*!< Outgoing record sequence number. */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + uint16_t mtu; /*!< path mtu, used to fragment outgoing messages */ +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + +#if defined(MBEDTLS_ZLIB_SUPPORT) + unsigned char *compress_buf; /*!< zlib data buffer */ +#endif /* MBEDTLS_ZLIB_SUPPORT */ +#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) + signed char split_done; /*!< current record already splitted? */ +#endif /* MBEDTLS_SSL_CBC_RECORD_SPLITTING */ + + /* + * PKI layer + */ + int client_auth; /*!< flag for client auth. */ + + /* + * User settings + */ +#if defined(MBEDTLS_X509_CRT_PARSE_C) + char *hostname; /*!< expected peer CN for verification + (and SNI if available) */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_ALPN) + const char *alpn_chosen; /*!< negotiated protocol */ +#endif /* MBEDTLS_SSL_ALPN */ + + /* + * Information for DTLS hello verify + */ +#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) + unsigned char *cli_id; /*!< transport-level ID of the client */ + size_t cli_id_len; /*!< length of cli_id */ +#endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY && MBEDTLS_SSL_SRV_C */ + + /* + * Secure renegotiation + */ + /* needed to know when to send extension on server */ + int secure_renegotiation; /*!< does peer support legacy or + secure renegotiation */ +#if defined(MBEDTLS_SSL_RENEGOTIATION) + size_t verify_data_len; /*!< length of verify data stored */ + char own_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */ + char peer_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */ +#endif /* MBEDTLS_SSL_RENEGOTIATION */ +}; + +#if defined(MBEDTLS_SSL_HW_RECORD_ACCEL) + +#define MBEDTLS_SSL_CHANNEL_OUTBOUND 0 +#define MBEDTLS_SSL_CHANNEL_INBOUND 1 + +extern int (*mbedtls_ssl_hw_record_init)(mbedtls_ssl_context *ssl, + const unsigned char *key_enc, const unsigned char *key_dec, + size_t keylen, + const unsigned char *iv_enc, const unsigned char *iv_dec, + size_t ivlen, + const unsigned char *mac_enc, const unsigned char *mac_dec, + size_t maclen); +extern int (*mbedtls_ssl_hw_record_activate)(mbedtls_ssl_context *ssl, int direction); +extern int (*mbedtls_ssl_hw_record_reset)(mbedtls_ssl_context *ssl); +extern int (*mbedtls_ssl_hw_record_write)(mbedtls_ssl_context *ssl); +extern int (*mbedtls_ssl_hw_record_read)(mbedtls_ssl_context *ssl); +extern int (*mbedtls_ssl_hw_record_finish)(mbedtls_ssl_context *ssl); +#endif /* MBEDTLS_SSL_HW_RECORD_ACCEL */ + +/** + * \brief Return the name of the ciphersuite associated with the + * given ID + * + * \param ciphersuite_id SSL ciphersuite ID + * + * \return a string containing the ciphersuite name + */ +const char *mbedtls_ssl_get_ciphersuite_name( const int ciphersuite_id ); + +/** + * \brief Return the ID of the ciphersuite associated with the + * given name + * + * \param ciphersuite_name SSL ciphersuite name + * + * \return the ID with the ciphersuite or 0 if not found + */ +int mbedtls_ssl_get_ciphersuite_id( const char *ciphersuite_name ); + +/** + * \brief Initialize an SSL context + * Just makes the context ready for mbedtls_ssl_setup() or + * mbedtls_ssl_free() + * + * \param ssl SSL context + */ +void mbedtls_ssl_init( mbedtls_ssl_context *ssl ); + +/** + * \brief Set up an SSL context for use + * + * \note No copy of the configuration context is made, it can be + * shared by many mbedtls_ssl_context structures. + * + * \warning The conf structure will be accessed during the session. + * It must not be modified or freed as long as the session + * is active. + * + * \warning This function must be called exactly once per context. + * Calling mbedtls_ssl_setup again is not supported, even + * if no session is active. + * + * \param ssl SSL context + * \param conf SSL configuration to use + * + * \return 0 if successful, or MBEDTLS_ERR_SSL_ALLOC_FAILED if + * memory allocation failed + */ +int mbedtls_ssl_setup( mbedtls_ssl_context *ssl, + const mbedtls_ssl_config *conf ); + +/** + * \brief Reset an already initialized SSL context for re-use + * while retaining application-set variables, function + * pointers and data. + * + * \param ssl SSL context + * \return 0 if successful, or MBEDTLS_ERR_SSL_ALLOC_FAILED, + MBEDTLS_ERR_SSL_HW_ACCEL_FAILED or + * MBEDTLS_ERR_SSL_COMPRESSION_FAILED + */ +int mbedtls_ssl_session_reset( mbedtls_ssl_context *ssl ); + +/** + * \brief Set the current endpoint type + * + * \param conf SSL configuration + * \param endpoint must be MBEDTLS_SSL_IS_CLIENT or MBEDTLS_SSL_IS_SERVER + */ +void mbedtls_ssl_conf_endpoint( mbedtls_ssl_config *conf, int endpoint ); + +/** + * \brief Set the transport type (TLS or DTLS). + * Default: TLS + * + * \note For DTLS, you must either provide a recv callback that + * doesn't block, or one that handles timeouts, see + * \c mbedtls_ssl_set_bio(). You also need to provide timer + * callbacks with \c mbedtls_ssl_set_timer_cb(). + * + * \param conf SSL configuration + * \param transport transport type: + * MBEDTLS_SSL_TRANSPORT_STREAM for TLS, + * MBEDTLS_SSL_TRANSPORT_DATAGRAM for DTLS. + */ +void mbedtls_ssl_conf_transport( mbedtls_ssl_config *conf, int transport ); + +/** + * \brief Set the certificate verification mode + * Default: NONE on server, REQUIRED on client + * + * \param conf SSL configuration + * \param authmode can be: + * + * MBEDTLS_SSL_VERIFY_NONE: peer certificate is not checked + * (default on server) + * (insecure on client) + * + * MBEDTLS_SSL_VERIFY_OPTIONAL: peer certificate is checked, however the + * handshake continues even if verification failed; + * mbedtls_ssl_get_verify_result() can be called after the + * handshake is complete. + * + * MBEDTLS_SSL_VERIFY_REQUIRED: peer *must* present a valid certificate, + * handshake is aborted if verification failed. + * (default on client) + * + * \note On client, MBEDTLS_SSL_VERIFY_REQUIRED is the recommended mode. + * With MBEDTLS_SSL_VERIFY_OPTIONAL, the user needs to call mbedtls_ssl_get_verify_result() at + * the right time(s), which may not be obvious, while REQUIRED always perform + * the verification as soon as possible. For example, REQUIRED was protecting + * against the "triple handshake" attack even before it was found. + */ +void mbedtls_ssl_conf_authmode( mbedtls_ssl_config *conf, int authmode ); + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Set the verification callback (Optional). + * + * If set, the verify callback is called for each + * certificate in the chain. For implementation + * information, please see \c mbedtls_x509_crt_verify() + * + * \param conf SSL configuration + * \param f_vrfy verification function + * \param p_vrfy verification parameter + */ +void mbedtls_ssl_conf_verify( mbedtls_ssl_config *conf, + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), + void *p_vrfy ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +/** + * \brief Set the random number generator callback + * + * \param conf SSL configuration + * \param f_rng RNG function + * \param p_rng RNG parameter + */ +void mbedtls_ssl_conf_rng( mbedtls_ssl_config *conf, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Set the debug callback + * + * The callback has the following argument: + * void * opaque context for the callback + * int debug level + * const char * file name + * int line number + * const char * message + * + * \param conf SSL configuration + * \param f_dbg debug function + * \param p_dbg debug parameter + */ +void mbedtls_ssl_conf_dbg( mbedtls_ssl_config *conf, + void (*f_dbg)(void *, int, const char *, int, const char *), + void *p_dbg ); + +/** + * \brief Set the underlying BIO callbacks for write, read and + * read-with-timeout. + * + * \param ssl SSL context + * \param p_bio parameter (context) shared by BIO callbacks + * \param f_send write callback + * \param f_recv read callback + * \param f_recv_timeout blocking read callback with timeout. + * + * \note One of f_recv or f_recv_timeout can be NULL, in which case + * the other is used. If both are non-NULL, f_recv_timeout is + * used and f_recv is ignored (as if it were NULL). + * + * \note The two most common use cases are: + * - non-blocking I/O, f_recv != NULL, f_recv_timeout == NULL + * - blocking I/O, f_recv == NULL, f_recv_timout != NULL + * + * \note For DTLS, you need to provide either a non-NULL + * f_recv_timeout callback, or a f_recv that doesn't block. + * + * \note See the documentations of \c mbedtls_ssl_sent_t, + * \c mbedtls_ssl_recv_t and \c mbedtls_ssl_recv_timeout_t for + * the conventions those callbacks must follow. + * + * \note On some platforms, net_sockets.c provides + * \c mbedtls_net_send(), \c mbedtls_net_recv() and + * \c mbedtls_net_recv_timeout() that are suitable to be used + * here. + */ +void mbedtls_ssl_set_bio( mbedtls_ssl_context *ssl, + void *p_bio, + mbedtls_ssl_send_t *f_send, + mbedtls_ssl_recv_t *f_recv, + mbedtls_ssl_recv_timeout_t *f_recv_timeout ); + +#if defined(MBEDTLS_SSL_PROTO_DTLS) +/** + * \brief Set the Maximum Tranport Unit (MTU). + * Special value: 0 means unset (no limit). + * This represents the maximum size of a datagram payload + * handled by the transport layer (usually UDP) as determined + * by the network link and stack. In practice, this controls + * the maximum size datagram the DTLS layer will pass to the + * \c f_send() callback set using \c mbedtls_ssl_set_bio(). + * + * \note The limit on datagram size is converted to a limit on + * record payload by subtracting the current overhead of + * encapsulation and encryption/authentication if any. + * + * \note This can be called at any point during the connection, for + * example when a Path Maximum Transfer Unit (PMTU) + * estimate becomes available from other sources, + * such as lower (or higher) protocol layers. + * + * \note This setting only controls the size of the packets we send, + * and does not restrict the size of the datagrams we're + * willing to receive. Client-side, you can request the + * server to use smaller records with \c + * mbedtls_ssl_conf_max_frag_len(). + * + * \note If both a MTU and a maximum fragment length have been + * configured (or negotiated with the peer), the resulting + * lower limit on record payload (see first note) is used. + * + * \note This can only be used to decrease the maximum size + * of datagrams (hence records, see first note) sent. It + * cannot be used to increase the maximum size of records over + * the limit set by #MBEDTLS_SSL_OUT_CONTENT_LEN. + * + * \note Values lower than the current record layer expansion will + * result in an error when trying to send data. + * + * \note Using record compression together with a non-zero MTU value + * will result in an error when trying to send data. + * + * \param ssl SSL context + * \param mtu Value of the path MTU in bytes + */ +void mbedtls_ssl_set_mtu( mbedtls_ssl_context *ssl, uint16_t mtu ); +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + +/** + * \brief Set the timeout period for mbedtls_ssl_read() + * (Default: no timeout.) + * + * \param conf SSL configuration context + * \param timeout Timeout value in milliseconds. + * Use 0 for no timeout (default). + * + * \note With blocking I/O, this will only work if a non-NULL + * \c f_recv_timeout was set with \c mbedtls_ssl_set_bio(). + * With non-blocking I/O, this will only work if timer + * callbacks were set with \c mbedtls_ssl_set_timer_cb(). + * + * \note With non-blocking I/O, you may also skip this function + * altogether and handle timeouts at the application layer. + */ +void mbedtls_ssl_conf_read_timeout( mbedtls_ssl_config *conf, uint32_t timeout ); + +/** + * \brief Set the timer callbacks (Mandatory for DTLS.) + * + * \param ssl SSL context + * \param p_timer parameter (context) shared by timer callbacks + * \param f_set_timer set timer callback + * \param f_get_timer get timer callback. Must return: + * + * \note See the documentation of \c mbedtls_ssl_set_timer_t and + * \c mbedtls_ssl_get_timer_t for the conventions this pair of + * callbacks must follow. + * + * \note On some platforms, timing.c provides + * \c mbedtls_timing_set_delay() and + * \c mbedtls_timing_get_delay() that are suitable for using + * here, except if using an event-driven style. + * + * \note See also the "DTLS tutorial" article in our knowledge base. + * https://tls.mbed.org/kb/how-to/dtls-tutorial + */ +void mbedtls_ssl_set_timer_cb( mbedtls_ssl_context *ssl, + void *p_timer, + mbedtls_ssl_set_timer_t *f_set_timer, + mbedtls_ssl_get_timer_t *f_get_timer ); + +/** + * \brief Callback type: generate and write session ticket + * + * \note This describes what a callback implementation should do. + * This callback should generate an encrypted and + * authenticated ticket for the session and write it to the + * output buffer. Here, ticket means the opaque ticket part + * of the NewSessionTicket structure of RFC 5077. + * + * \param p_ticket Context for the callback + * \param session SSL session to be written in the ticket + * \param start Start of the output buffer + * \param end End of the output buffer + * \param tlen On exit, holds the length written + * \param lifetime On exit, holds the lifetime of the ticket in seconds + * + * \return 0 if successful, or + * a specific MBEDTLS_ERR_XXX code. + */ +typedef int mbedtls_ssl_ticket_write_t( void *p_ticket, + const mbedtls_ssl_session *session, + unsigned char *start, + const unsigned char *end, + size_t *tlen, + uint32_t *lifetime ); + +#if defined(MBEDTLS_SSL_EXPORT_KEYS) +/** + * \brief Callback type: Export key block and master secret + * + * \note This is required for certain uses of TLS, e.g. EAP-TLS + * (RFC 5216) and Thread. The key pointers are ephemeral and + * therefore must not be stored. The master secret and keys + * should not be used directly except as an input to a key + * derivation function. + * + * \param p_expkey Context for the callback + * \param ms Pointer to master secret (fixed length: 48 bytes) + * \param kb Pointer to key block, see RFC 5246 section 6.3 + * (variable length: 2 * maclen + 2 * keylen + 2 * ivlen). + * \param maclen MAC length + * \param keylen Key length + * \param ivlen IV length + * + * \return 0 if successful, or + * a specific MBEDTLS_ERR_XXX code. + */ +typedef int mbedtls_ssl_export_keys_t( void *p_expkey, + const unsigned char *ms, + const unsigned char *kb, + size_t maclen, + size_t keylen, + size_t ivlen ); +#endif /* MBEDTLS_SSL_EXPORT_KEYS */ + +/** + * \brief Callback type: parse and load session ticket + * + * \note This describes what a callback implementation should do. + * This callback should parse a session ticket as generated + * by the corresponding mbedtls_ssl_ticket_write_t function, + * and, if the ticket is authentic and valid, load the + * session. + * + * \note The implementation is allowed to modify the first len + * bytes of the input buffer, eg to use it as a temporary + * area for the decrypted ticket contents. + * + * \param p_ticket Context for the callback + * \param session SSL session to be loaded + * \param buf Start of the buffer containing the ticket + * \param len Length of the ticket. + * + * \return 0 if successful, or + * MBEDTLS_ERR_SSL_INVALID_MAC if not authentic, or + * MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED if expired, or + * any other non-zero code for other failures. + */ +typedef int mbedtls_ssl_ticket_parse_t( void *p_ticket, + mbedtls_ssl_session *session, + unsigned char *buf, + size_t len ); + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_SRV_C) +/** + * \brief Configure SSL session ticket callbacks (server only). + * (Default: none.) + * + * \note On server, session tickets are enabled by providing + * non-NULL callbacks. + * + * \note On client, use \c mbedtls_ssl_conf_session_tickets(). + * + * \param conf SSL configuration context + * \param f_ticket_write Callback for writing a ticket + * \param f_ticket_parse Callback for parsing a ticket + * \param p_ticket Context shared by the two callbacks + */ +void mbedtls_ssl_conf_session_tickets_cb( mbedtls_ssl_config *conf, + mbedtls_ssl_ticket_write_t *f_ticket_write, + mbedtls_ssl_ticket_parse_t *f_ticket_parse, + void *p_ticket ); +#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_EXPORT_KEYS) +/** + * \brief Configure key export callback. + * (Default: none.) + * + * \note See \c mbedtls_ssl_export_keys_t. + * + * \param conf SSL configuration context + * \param f_export_keys Callback for exporting keys + * \param p_export_keys Context for the callback + */ +void mbedtls_ssl_conf_export_keys_cb( mbedtls_ssl_config *conf, + mbedtls_ssl_export_keys_t *f_export_keys, + void *p_export_keys ); +#endif /* MBEDTLS_SSL_EXPORT_KEYS */ + +#if defined(MBEDTLS_SSL_ASYNC_PRIVATE) +/** + * \brief Configure asynchronous private key operation callbacks. + * + * \param conf SSL configuration context + * \param f_async_sign Callback to start a signature operation. See + * the description of ::mbedtls_ssl_async_sign_t + * for more information. This may be \c NULL if the + * external processor does not support any signature + * operation; in this case the private key object + * associated with the certificate will be used. + * \param f_async_decrypt Callback to start a decryption operation. See + * the description of ::mbedtls_ssl_async_decrypt_t + * for more information. This may be \c NULL if the + * external processor does not support any decryption + * operation; in this case the private key object + * associated with the certificate will be used. + * \param f_async_resume Callback to resume an asynchronous operation. See + * the description of ::mbedtls_ssl_async_resume_t + * for more information. This may not be \c NULL unless + * \p f_async_sign and \p f_async_decrypt are both + * \c NULL. + * \param f_async_cancel Callback to cancel an asynchronous operation. See + * the description of ::mbedtls_ssl_async_cancel_t + * for more information. This may be \c NULL if + * no cleanup is needed. + * \param config_data A pointer to configuration data which can be + * retrieved with + * mbedtls_ssl_conf_get_async_config_data(). The + * library stores this value without dereferencing it. + */ +void mbedtls_ssl_conf_async_private_cb( mbedtls_ssl_config *conf, + mbedtls_ssl_async_sign_t *f_async_sign, + mbedtls_ssl_async_decrypt_t *f_async_decrypt, + mbedtls_ssl_async_resume_t *f_async_resume, + mbedtls_ssl_async_cancel_t *f_async_cancel, + void *config_data ); + +/** + * \brief Retrieve the configuration data set by + * mbedtls_ssl_conf_async_private_cb(). + * + * \param conf SSL configuration context + * \return The configuration data set by + * mbedtls_ssl_conf_async_private_cb(). + */ +void *mbedtls_ssl_conf_get_async_config_data( const mbedtls_ssl_config *conf ); + +/** + * \brief Retrieve the asynchronous operation user context. + * + * \note This function may only be called while a handshake + * is in progress. + * + * \param ssl The SSL context to access. + * + * \return The asynchronous operation user context that was last + * set during the current handshake. If + * mbedtls_ssl_set_async_operation_data() has not yet been + * called during the current handshake, this function returns + * \c NULL. + */ +void *mbedtls_ssl_get_async_operation_data( const mbedtls_ssl_context *ssl ); + +/** + * \brief Retrieve the asynchronous operation user context. + * + * \note This function may only be called while a handshake + * is in progress. + * + * \param ssl The SSL context to access. + * \param ctx The new value of the asynchronous operation user context. + * Call mbedtls_ssl_get_async_operation_data() later during the + * same handshake to retrieve this value. + */ +void mbedtls_ssl_set_async_operation_data( mbedtls_ssl_context *ssl, + void *ctx ); +#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ + +/** + * \brief Callback type: generate a cookie + * + * \param ctx Context for the callback + * \param p Buffer to write to, + * must be updated to point right after the cookie + * \param end Pointer to one past the end of the output buffer + * \param info Client ID info that was passed to + * \c mbedtls_ssl_set_client_transport_id() + * \param ilen Length of info in bytes + * + * \return The callback must return 0 on success, + * or a negative error code. + */ +typedef int mbedtls_ssl_cookie_write_t( void *ctx, + unsigned char **p, unsigned char *end, + const unsigned char *info, size_t ilen ); + +/** + * \brief Callback type: verify a cookie + * + * \param ctx Context for the callback + * \param cookie Cookie to verify + * \param clen Length of cookie + * \param info Client ID info that was passed to + * \c mbedtls_ssl_set_client_transport_id() + * \param ilen Length of info in bytes + * + * \return The callback must return 0 if cookie is valid, + * or a negative error code. + */ +typedef int mbedtls_ssl_cookie_check_t( void *ctx, + const unsigned char *cookie, size_t clen, + const unsigned char *info, size_t ilen ); + +#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C) +/** + * \brief Register callbacks for DTLS cookies + * (Server only. DTLS only.) + * + * Default: dummy callbacks that fail, in order to force you to + * register working callbacks (and initialize their context). + * + * To disable HelloVerifyRequest, register NULL callbacks. + * + * \warning Disabling hello verification allows your server to be used + * for amplification in DoS attacks against other hosts. + * Only disable if you known this can't happen in your + * particular environment. + * + * \note See comments on \c mbedtls_ssl_handshake() about handling + * the MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED that is expected + * on the first handshake attempt when this is enabled. + * + * \note This is also necessary to handle client reconnection from + * the same port as described in RFC 6347 section 4.2.8 (only + * the variant with cookies is supported currently). See + * comments on \c mbedtls_ssl_read() for details. + * + * \param conf SSL configuration + * \param f_cookie_write Cookie write callback + * \param f_cookie_check Cookie check callback + * \param p_cookie Context for both callbacks + */ +void mbedtls_ssl_conf_dtls_cookies( mbedtls_ssl_config *conf, + mbedtls_ssl_cookie_write_t *f_cookie_write, + mbedtls_ssl_cookie_check_t *f_cookie_check, + void *p_cookie ); + +/** + * \brief Set client's transport-level identification info. + * (Server only. DTLS only.) + * + * This is usually the IP address (and port), but could be + * anything identify the client depending on the underlying + * network stack. Used for HelloVerifyRequest with DTLS. + * This is *not* used to route the actual packets. + * + * \param ssl SSL context + * \param info Transport-level info identifying the client (eg IP + port) + * \param ilen Length of info in bytes + * + * \note An internal copy is made, so the info buffer can be reused. + * + * \return 0 on success, + * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used on client, + * MBEDTLS_ERR_SSL_ALLOC_FAILED if out of memory. + */ +int mbedtls_ssl_set_client_transport_id( mbedtls_ssl_context *ssl, + const unsigned char *info, + size_t ilen ); + +#endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY && MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) +/** + * \brief Enable or disable anti-replay protection for DTLS. + * (DTLS only, no effect on TLS.) + * Default: enabled. + * + * \param conf SSL configuration + * \param mode MBEDTLS_SSL_ANTI_REPLAY_ENABLED or MBEDTLS_SSL_ANTI_REPLAY_DISABLED. + * + * \warning Disabling this is a security risk unless the application + * protocol handles duplicated packets in a safe way. You + * should not disable this without careful consideration. + * However, if your application already detects duplicated + * packets and needs information about them to adjust its + * transmission strategy, then you'll want to disable this. + */ +void mbedtls_ssl_conf_dtls_anti_replay( mbedtls_ssl_config *conf, char mode ); +#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */ + +#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT) +/** + * \brief Set a limit on the number of records with a bad MAC + * before terminating the connection. + * (DTLS only, no effect on TLS.) + * Default: 0 (disabled). + * + * \param conf SSL configuration + * \param limit Limit, or 0 to disable. + * + * \note If the limit is N, then the connection is terminated when + * the Nth non-authentic record is seen. + * + * \note Records with an invalid header are not counted, only the + * ones going through the authentication-decryption phase. + * + * \note This is a security trade-off related to the fact that it's + * often relatively easy for an active attacker ot inject UDP + * datagrams. On one hand, setting a low limit here makes it + * easier for such an attacker to forcibly terminated a + * connection. On the other hand, a high limit or no limit + * might make us waste resources checking authentication on + * many bogus packets. + */ +void mbedtls_ssl_conf_dtls_badmac_limit( mbedtls_ssl_config *conf, unsigned limit ); +#endif /* MBEDTLS_SSL_DTLS_BADMAC_LIMIT */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) + +/** + * \brief Allow or disallow packing of multiple handshake records + * within a single datagram. + * + * \param ssl The SSL context to configure. + * \param allow_packing This determines whether datagram packing may + * be used or not. A value of \c 0 means that every + * record will be sent in a separate datagram; a + * value of \c 1 means that, if space permits, + * multiple handshake messages (including CCS) belonging to + * a single flight may be packed within a single datagram. + * + * \note This is enabled by default and should only be disabled + * for test purposes, or if datagram packing causes + * interoperability issues with peers that don't support it. + * + * \note Allowing datagram packing reduces the network load since + * there's less overhead if multiple messages share the same + * datagram. Also, it increases the handshake efficiency + * since messages belonging to a single datagram will not + * be reordered in transit, and so future message buffering + * or flight retransmission (if no buffering is used) as + * means to deal with reordering are needed less frequently. + * + * \note Application records are not affected by this option and + * are currently always sent in separate datagrams. + * + */ +void mbedtls_ssl_set_datagram_packing( mbedtls_ssl_context *ssl, + unsigned allow_packing ); + +/** + * \brief Set retransmit timeout values for the DTLS handshake. + * (DTLS only, no effect on TLS.) + * + * \param conf SSL configuration + * \param min Initial timeout value in milliseconds. + * Default: 1000 (1 second). + * \param max Maximum timeout value in milliseconds. + * Default: 60000 (60 seconds). + * + * \note Default values are from RFC 6347 section 4.2.4.1. + * + * \note The 'min' value should typically be slightly above the + * expected round-trip time to your peer, plus whatever time + * it takes for the peer to process the message. For example, + * if your RTT is about 600ms and you peer needs up to 1s to + * do the cryptographic operations in the handshake, then you + * should set 'min' slightly above 1600. Lower values of 'min' + * might cause spurious resends which waste network resources, + * while larger value of 'min' will increase overall latency + * on unreliable network links. + * + * \note The more unreliable your network connection is, the larger + * your max / min ratio needs to be in order to achieve + * reliable handshakes. + * + * \note Messages are retransmitted up to log2(ceil(max/min)) times. + * For example, if min = 1s and max = 5s, the retransmit plan + * goes: send ... 1s -> resend ... 2s -> resend ... 4s -> + * resend ... 5s -> give up and return a timeout error. + */ +void mbedtls_ssl_conf_handshake_timeout( mbedtls_ssl_config *conf, uint32_t min, uint32_t max ); +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + +#if defined(MBEDTLS_SSL_SRV_C) +/** + * \brief Set the session cache callbacks (server-side only) + * If not set, no session resuming is done (except if session + * tickets are enabled too). + * + * The session cache has the responsibility to check for stale + * entries based on timeout. See RFC 5246 for recommendations. + * + * Warning: session.peer_cert is cleared by the SSL/TLS layer on + * connection shutdown, so do not cache the pointer! Either set + * it to NULL or make a full copy of the certificate. + * + * The get callback is called once during the initial handshake + * to enable session resuming. The get function has the + * following parameters: (void *parameter, mbedtls_ssl_session *session) + * If a valid entry is found, it should fill the master of + * the session object with the cached values and return 0, + * return 1 otherwise. Optionally peer_cert can be set as well + * if it is properly present in cache entry. + * + * The set callback is called once during the initial handshake + * to enable session resuming after the entire handshake has + * been finished. The set function has the following parameters: + * (void *parameter, const mbedtls_ssl_session *session). The function + * should create a cache entry for future retrieval based on + * the data in the session structure and should keep in mind + * that the mbedtls_ssl_session object presented (and all its referenced + * data) is cleared by the SSL/TLS layer when the connection is + * terminated. It is recommended to add metadata to determine if + * an entry is still valid in the future. Return 0 if + * successfully cached, return 1 otherwise. + * + * \param conf SSL configuration + * \param p_cache parmater (context) for both callbacks + * \param f_get_cache session get callback + * \param f_set_cache session set callback + */ +void mbedtls_ssl_conf_session_cache( mbedtls_ssl_config *conf, + void *p_cache, + int (*f_get_cache)(void *, mbedtls_ssl_session *), + int (*f_set_cache)(void *, const mbedtls_ssl_session *) ); +#endif /* MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Request resumption of session (client-side only) + * Session data is copied from presented session structure. + * + * \param ssl SSL context + * \param session session context + * + * \return 0 if successful, + * MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used server-side or + * arguments are otherwise invalid + * + * \sa mbedtls_ssl_get_session() + */ +int mbedtls_ssl_set_session( mbedtls_ssl_context *ssl, const mbedtls_ssl_session *session ); +#endif /* MBEDTLS_SSL_CLI_C */ + +/** + * \brief Set the list of allowed ciphersuites and the preference + * order. First in the list has the highest preference. + * (Overrides all version-specific lists) + * + * The ciphersuites array is not copied, and must remain + * valid for the lifetime of the ssl_config. + * + * Note: The server uses its own preferences + * over the preference of the client unless + * MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE is defined! + * + * \param conf SSL configuration + * \param ciphersuites 0-terminated list of allowed ciphersuites + */ +void mbedtls_ssl_conf_ciphersuites( mbedtls_ssl_config *conf, + const int *ciphersuites ); + +/** + * \brief Set the list of allowed ciphersuites and the + * preference order for a specific version of the protocol. + * (Only useful on the server side) + * + * The ciphersuites array is not copied, and must remain + * valid for the lifetime of the ssl_config. + * + * \param conf SSL configuration + * \param ciphersuites 0-terminated list of allowed ciphersuites + * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 + * supported) + * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, + * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, + * MBEDTLS_SSL_MINOR_VERSION_3 supported) + * + * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 + * and MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 + */ +void mbedtls_ssl_conf_ciphersuites_for_version( mbedtls_ssl_config *conf, + const int *ciphersuites, + int major, int minor ); + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Set the X.509 security profile used for verification + * + * \note The restrictions are enforced for all certificates in the + * chain. However, signatures in the handshake are not covered + * by this setting but by \b mbedtls_ssl_conf_sig_hashes(). + * + * \param conf SSL configuration + * \param profile Profile to use + */ +void mbedtls_ssl_conf_cert_profile( mbedtls_ssl_config *conf, + const mbedtls_x509_crt_profile *profile ); + +/** + * \brief Set the data required to verify peer certificate + * + * \note See \c mbedtls_x509_crt_verify() for notes regarding the + * parameters ca_chain (maps to trust_ca for that function) + * and ca_crl. + * + * \param conf SSL configuration + * \param ca_chain trusted CA chain (meaning all fully trusted top-level CAs) + * \param ca_crl trusted CA CRLs + */ +void mbedtls_ssl_conf_ca_chain( mbedtls_ssl_config *conf, + mbedtls_x509_crt *ca_chain, + mbedtls_x509_crl *ca_crl ); + +/** + * \brief Set own certificate chain and private key + * + * \note own_cert should contain in order from the bottom up your + * certificate chain. The top certificate (self-signed) + * can be omitted. + * + * \note On server, this function can be called multiple times to + * provision more than one cert/key pair (eg one ECDSA, one + * RSA with SHA-256, one RSA with SHA-1). An adequate + * certificate will be selected according to the client's + * advertised capabilities. In case mutliple certificates are + * adequate, preference is given to the one set by the first + * call to this function, then second, etc. + * + * \note On client, only the first call has any effect. That is, + * only one client certificate can be provisioned. The + * server's preferences in its CertficateRequest message will + * be ignored and our only cert will be sent regardless of + * whether it matches those preferences - the server can then + * decide what it wants to do with it. + * + * \note The provided \p pk_key needs to match the public key in the + * first certificate in \p own_cert, or all handshakes using + * that certificate will fail. It is your responsibility + * to ensure that; this function will not perform any check. + * You may use mbedtls_pk_check_pair() in order to perform + * this check yourself, but be aware that this function can + * be computationally expensive on some key types. + * + * \param conf SSL configuration + * \param own_cert own public certificate chain + * \param pk_key own private key + * + * \return 0 on success or MBEDTLS_ERR_SSL_ALLOC_FAILED + */ +int mbedtls_ssl_conf_own_cert( mbedtls_ssl_config *conf, + mbedtls_x509_crt *own_cert, + mbedtls_pk_context *pk_key ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) +/** + * \brief Set the Pre Shared Key (PSK) and the expected identity name + * + * \note This is mainly useful for clients. Servers will usually + * want to use \c mbedtls_ssl_conf_psk_cb() instead. + * + * \note Currently clients can only register one pre-shared key. + * In other words, the servers' identity hint is ignored. + * Support for setting multiple PSKs on clients and selecting + * one based on the identity hint is not a planned feature but + * feedback is welcomed. + * + * \param conf SSL configuration + * \param psk pointer to the pre-shared key + * \param psk_len pre-shared key length + * \param psk_identity pointer to the pre-shared key identity + * \param psk_identity_len identity key length + * + * \return 0 if successful or MBEDTLS_ERR_SSL_ALLOC_FAILED + */ +int mbedtls_ssl_conf_psk( mbedtls_ssl_config *conf, + const unsigned char *psk, size_t psk_len, + const unsigned char *psk_identity, size_t psk_identity_len ); + + +/** + * \brief Set the Pre Shared Key (PSK) for the current handshake + * + * \note This should only be called inside the PSK callback, + * ie the function passed to \c mbedtls_ssl_conf_psk_cb(). + * + * \param ssl SSL context + * \param psk pointer to the pre-shared key + * \param psk_len pre-shared key length + * + * \return 0 if successful or MBEDTLS_ERR_SSL_ALLOC_FAILED + */ +int mbedtls_ssl_set_hs_psk( mbedtls_ssl_context *ssl, + const unsigned char *psk, size_t psk_len ); + +/** + * \brief Set the PSK callback (server-side only). + * + * If set, the PSK callback is called for each + * handshake where a PSK ciphersuite was negotiated. + * The caller provides the identity received and wants to + * receive the actual PSK data and length. + * + * The callback has the following parameters: (void *parameter, + * mbedtls_ssl_context *ssl, const unsigned char *psk_identity, + * size_t identity_len) + * If a valid PSK identity is found, the callback should use + * \c mbedtls_ssl_set_hs_psk() on the ssl context to set the + * correct PSK and return 0. + * Any other return value will result in a denied PSK identity. + * + * \note If you set a PSK callback using this function, then you + * don't need to set a PSK key and identity using + * \c mbedtls_ssl_conf_psk(). + * + * \param conf SSL configuration + * \param f_psk PSK identity function + * \param p_psk PSK identity parameter + */ +void mbedtls_ssl_conf_psk_cb( mbedtls_ssl_config *conf, + int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *, + size_t), + void *p_psk ); +#endif /* MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED */ + +#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_SRV_C) + +#if !defined(MBEDTLS_DEPRECATED_REMOVED) + +#if defined(MBEDTLS_DEPRECATED_WARNING) +#define MBEDTLS_DEPRECATED __attribute__((deprecated)) +#else +#define MBEDTLS_DEPRECATED +#endif + +/** + * \brief Set the Diffie-Hellman public P and G values, + * read as hexadecimal strings (server-side only) + * (Default values: MBEDTLS_DHM_RFC3526_MODP_2048_[PG]) + * + * \param conf SSL configuration + * \param dhm_P Diffie-Hellman-Merkle modulus + * \param dhm_G Diffie-Hellman-Merkle generator + * + * \deprecated Superseded by \c mbedtls_ssl_conf_dh_param_bin. + * + * \return 0 if successful + */ +MBEDTLS_DEPRECATED int mbedtls_ssl_conf_dh_param( mbedtls_ssl_config *conf, + const char *dhm_P, + const char *dhm_G ); + +#endif /* MBEDTLS_DEPRECATED_REMOVED */ + +/** + * \brief Set the Diffie-Hellman public P and G values + * from big-endian binary presentations. + * (Default values: MBEDTLS_DHM_RFC3526_MODP_2048_[PG]_BIN) + * + * \param conf SSL configuration + * \param dhm_P Diffie-Hellman-Merkle modulus in big-endian binary form + * \param P_len Length of DHM modulus + * \param dhm_G Diffie-Hellman-Merkle generator in big-endian binary form + * \param G_len Length of DHM generator + * + * \return 0 if successful + */ +int mbedtls_ssl_conf_dh_param_bin( mbedtls_ssl_config *conf, + const unsigned char *dhm_P, size_t P_len, + const unsigned char *dhm_G, size_t G_len ); + +/** + * \brief Set the Diffie-Hellman public P and G values, + * read from existing context (server-side only) + * + * \param conf SSL configuration + * \param dhm_ctx Diffie-Hellman-Merkle context + * + * \return 0 if successful + */ +int mbedtls_ssl_conf_dh_param_ctx( mbedtls_ssl_config *conf, mbedtls_dhm_context *dhm_ctx ); +#endif /* MBEDTLS_DHM_C && defined(MBEDTLS_SSL_SRV_C) */ + +#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Set the minimum length for Diffie-Hellman parameters. + * (Client-side only.) + * (Default: 1024 bits.) + * + * \param conf SSL configuration + * \param bitlen Minimum bit length of the DHM prime + */ +void mbedtls_ssl_conf_dhm_min_bitlen( mbedtls_ssl_config *conf, + unsigned int bitlen ); +#endif /* MBEDTLS_DHM_C && MBEDTLS_SSL_CLI_C */ + +#if defined(MBEDTLS_ECP_C) +/** + * \brief Set the allowed curves in order of preference. + * (Default: all defined curves.) + * + * On server: this only affects selection of the ECDHE curve; + * the curves used for ECDH and ECDSA are determined by the + * list of available certificates instead. + * + * On client: this affects the list of curves offered for any + * use. The server can override our preference order. + * + * Both sides: limits the set of curves accepted for use in + * ECDHE and in the peer's end-entity certificate. + * + * \note This has no influence on which curves are allowed inside the + * certificate chains, see \c mbedtls_ssl_conf_cert_profile() + * for that. For the end-entity certificate however, the key + * will be accepted only if it is allowed both by this list + * and by the cert profile. + * + * \note This list should be ordered by decreasing preference + * (preferred curve first). + * + * \param conf SSL configuration + * \param curves Ordered list of allowed curves, + * terminated by MBEDTLS_ECP_DP_NONE. + */ +void mbedtls_ssl_conf_curves( mbedtls_ssl_config *conf, + const mbedtls_ecp_group_id *curves ); +#endif /* MBEDTLS_ECP_C */ + +#if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) +/** + * \brief Set the allowed hashes for signatures during the handshake. + * (Default: all available hashes except MD5.) + * + * \note This only affects which hashes are offered and can be used + * for signatures during the handshake. Hashes for message + * authentication and the TLS PRF are controlled by the + * ciphersuite, see \c mbedtls_ssl_conf_ciphersuites(). Hashes + * used for certificate signature are controlled by the + * verification profile, see \c mbedtls_ssl_conf_cert_profile(). + * + * \note This list should be ordered by decreasing preference + * (preferred hash first). + * + * \param conf SSL configuration + * \param hashes Ordered list of allowed signature hashes, + * terminated by \c MBEDTLS_MD_NONE. + */ +void mbedtls_ssl_conf_sig_hashes( mbedtls_ssl_config *conf, + const int *hashes ); +#endif /* MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */ + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Set or reset the hostname to check against the received + * server certificate. It sets the ServerName TLS extension, + * too, if that extension is enabled. (client-side only) + * + * \param ssl SSL context + * \param hostname the server hostname, may be NULL to clear hostname + + * \note Maximum hostname length MBEDTLS_SSL_MAX_HOST_NAME_LEN. + * + * \return 0 if successful, MBEDTLS_ERR_SSL_ALLOC_FAILED on + * allocation failure, MBEDTLS_ERR_SSL_BAD_INPUT_DATA on + * too long input hostname. + * + * Hostname set to the one provided on success (cleared + * when NULL). On allocation failure hostname is cleared. + * On too long input failure, old hostname is unchanged. + */ +int mbedtls_ssl_set_hostname( mbedtls_ssl_context *ssl, const char *hostname ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) +/** + * \brief Set own certificate and key for the current handshake + * + * \note Same as \c mbedtls_ssl_conf_own_cert() but for use within + * the SNI callback. + * + * \param ssl SSL context + * \param own_cert own public certificate chain + * \param pk_key own private key + * + * \return 0 on success or MBEDTLS_ERR_SSL_ALLOC_FAILED + */ +int mbedtls_ssl_set_hs_own_cert( mbedtls_ssl_context *ssl, + mbedtls_x509_crt *own_cert, + mbedtls_pk_context *pk_key ); + +/** + * \brief Set the data required to verify peer certificate for the + * current handshake + * + * \note Same as \c mbedtls_ssl_conf_ca_chain() but for use within + * the SNI callback. + * + * \param ssl SSL context + * \param ca_chain trusted CA chain (meaning all fully trusted top-level CAs) + * \param ca_crl trusted CA CRLs + */ +void mbedtls_ssl_set_hs_ca_chain( mbedtls_ssl_context *ssl, + mbedtls_x509_crt *ca_chain, + mbedtls_x509_crl *ca_crl ); + +/** + * \brief Set authmode for the current handshake. + * + * \note Same as \c mbedtls_ssl_conf_authmode() but for use within + * the SNI callback. + * + * \param ssl SSL context + * \param authmode MBEDTLS_SSL_VERIFY_NONE, MBEDTLS_SSL_VERIFY_OPTIONAL or + * MBEDTLS_SSL_VERIFY_REQUIRED + */ +void mbedtls_ssl_set_hs_authmode( mbedtls_ssl_context *ssl, + int authmode ); + +/** + * \brief Set server side ServerName TLS extension callback + * (optional, server-side only). + * + * If set, the ServerName callback is called whenever the + * server receives a ServerName TLS extension from the client + * during a handshake. The ServerName callback has the + * following parameters: (void *parameter, mbedtls_ssl_context *ssl, + * const unsigned char *hostname, size_t len). If a suitable + * certificate is found, the callback must set the + * certificate(s) and key(s) to use with \c + * mbedtls_ssl_set_hs_own_cert() (can be called repeatedly), + * and may optionally adjust the CA and associated CRL with \c + * mbedtls_ssl_set_hs_ca_chain() as well as the client + * authentication mode with \c mbedtls_ssl_set_hs_authmode(), + * then must return 0. If no matching name is found, the + * callback must either set a default cert, or + * return non-zero to abort the handshake at this point. + * + * \param conf SSL configuration + * \param f_sni verification function + * \param p_sni verification parameter + */ +void mbedtls_ssl_conf_sni( mbedtls_ssl_config *conf, + int (*f_sni)(void *, mbedtls_ssl_context *, const unsigned char *, + size_t), + void *p_sni ); +#endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */ + +#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) +/** + * \brief Set the EC J-PAKE password for current handshake. + * + * \note An internal copy is made, and destroyed as soon as the + * handshake is completed, or when the SSL context is reset or + * freed. + * + * \note The SSL context needs to be already set up. The right place + * to call this function is between \c mbedtls_ssl_setup() or + * \c mbedtls_ssl_reset() and \c mbedtls_ssl_handshake(). + * + * \param ssl SSL context + * \param pw EC J-PAKE password (pre-shared secret) + * \param pw_len length of pw in bytes + * + * \return 0 on success, or a negative error code. + */ +int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl, + const unsigned char *pw, + size_t pw_len ); +#endif /*MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */ + +#if defined(MBEDTLS_SSL_ALPN) +/** + * \brief Set the supported Application Layer Protocols. + * + * \param conf SSL configuration + * \param protos Pointer to a NULL-terminated list of supported protocols, + * in decreasing preference order. The pointer to the list is + * recorded by the library for later reference as required, so + * the lifetime of the table must be atleast as long as the + * lifetime of the SSL configuration structure. + * + * \return 0 on success, or MBEDTLS_ERR_SSL_BAD_INPUT_DATA. + */ +int mbedtls_ssl_conf_alpn_protocols( mbedtls_ssl_config *conf, const char **protos ); + +/** + * \brief Get the name of the negotiated Application Layer Protocol. + * This function should be called after the handshake is + * completed. + * + * \param ssl SSL context + * + * \return Protcol name, or NULL if no protocol was negotiated. + */ +const char *mbedtls_ssl_get_alpn_protocol( const mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_SSL_ALPN */ + +/** + * \brief Set the maximum supported version sent from the client side + * and/or accepted at the server side + * (Default: MBEDTLS_SSL_MAX_MAJOR_VERSION, MBEDTLS_SSL_MAX_MINOR_VERSION) + * + * \note This ignores ciphersuites from higher versions. + * + * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 and + * MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 + * + * \param conf SSL configuration + * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 supported) + * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, + * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, + * MBEDTLS_SSL_MINOR_VERSION_3 supported) + */ +void mbedtls_ssl_conf_max_version( mbedtls_ssl_config *conf, int major, int minor ); + +/** + * \brief Set the minimum accepted SSL/TLS protocol version + * (Default: TLS 1.0) + * + * \note Input outside of the SSL_MAX_XXXXX_VERSION and + * SSL_MIN_XXXXX_VERSION range is ignored. + * + * \note MBEDTLS_SSL_MINOR_VERSION_0 (SSL v3) should be avoided. + * + * \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 and + * MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2 + * + * \param conf SSL configuration + * \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 supported) + * \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0, + * MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2, + * MBEDTLS_SSL_MINOR_VERSION_3 supported) + */ +void mbedtls_ssl_conf_min_version( mbedtls_ssl_config *conf, int major, int minor ); + +#if defined(MBEDTLS_SSL_FALLBACK_SCSV) && defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Set the fallback flag (client-side only). + * (Default: MBEDTLS_SSL_IS_NOT_FALLBACK). + * + * \note Set to MBEDTLS_SSL_IS_FALLBACK when preparing a fallback + * connection, that is a connection with max_version set to a + * lower value than the value you're willing to use. Such + * fallback connections are not recommended but are sometimes + * necessary to interoperate with buggy (version-intolerant) + * servers. + * + * \warning You should NOT set this to MBEDTLS_SSL_IS_FALLBACK for + * non-fallback connections! This would appear to work for a + * while, then cause failures when the server is upgraded to + * support a newer TLS version. + * + * \param conf SSL configuration + * \param fallback MBEDTLS_SSL_IS_NOT_FALLBACK or MBEDTLS_SSL_IS_FALLBACK + */ +void mbedtls_ssl_conf_fallback( mbedtls_ssl_config *conf, char fallback ); +#endif /* MBEDTLS_SSL_FALLBACK_SCSV && MBEDTLS_SSL_CLI_C */ + +#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC) +/** + * \brief Enable or disable Encrypt-then-MAC + * (Default: MBEDTLS_SSL_ETM_ENABLED) + * + * \note This should always be enabled, it is a security + * improvement, and should not cause any interoperability + * issue (used only if the peer supports it too). + * + * \param conf SSL configuration + * \param etm MBEDTLS_SSL_ETM_ENABLED or MBEDTLS_SSL_ETM_DISABLED + */ +void mbedtls_ssl_conf_encrypt_then_mac( mbedtls_ssl_config *conf, char etm ); +#endif /* MBEDTLS_SSL_ENCRYPT_THEN_MAC */ + +#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) +/** + * \brief Enable or disable Extended Master Secret negotiation. + * (Default: MBEDTLS_SSL_EXTENDED_MS_ENABLED) + * + * \note This should always be enabled, it is a security fix to the + * protocol, and should not cause any interoperability issue + * (used only if the peer supports it too). + * + * \param conf SSL configuration + * \param ems MBEDTLS_SSL_EXTENDED_MS_ENABLED or MBEDTLS_SSL_EXTENDED_MS_DISABLED + */ +void mbedtls_ssl_conf_extended_master_secret( mbedtls_ssl_config *conf, char ems ); +#endif /* MBEDTLS_SSL_EXTENDED_MASTER_SECRET */ + +#if defined(MBEDTLS_ARC4_C) +/** + * \brief Disable or enable support for RC4 + * (Default: MBEDTLS_SSL_ARC4_DISABLED) + * + * \warning Use of RC4 in DTLS/TLS has been prohibited by RFC 7465 + * for security reasons. Use at your own risk. + * + * \note This function is deprecated and will likely be removed in + * a future version of the library. + * RC4 is disabled by default at compile time and needs to be + * actively enabled for use with legacy systems. + * + * \param conf SSL configuration + * \param arc4 MBEDTLS_SSL_ARC4_ENABLED or MBEDTLS_SSL_ARC4_DISABLED + */ +void mbedtls_ssl_conf_arc4_support( mbedtls_ssl_config *conf, char arc4 ); +#endif /* MBEDTLS_ARC4_C */ + +#if defined(MBEDTLS_SSL_SRV_C) +/** + * \brief Whether to send a list of acceptable CAs in + * CertificateRequest messages. + * (Default: do send) + * + * \param conf SSL configuration + * \param cert_req_ca_list MBEDTLS_SSL_CERT_REQ_CA_LIST_ENABLED or + * MBEDTLS_SSL_CERT_REQ_CA_LIST_DISABLED + */ +void mbedtls_ssl_conf_cert_req_ca_list( mbedtls_ssl_config *conf, + char cert_req_ca_list ); +#endif /* MBEDTLS_SSL_SRV_C */ + +#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) +/** + * \brief Set the maximum fragment length to emit and/or negotiate. + * (Typical: the smaller of #MBEDTLS_SSL_IN_CONTENT_LEN and + * #MBEDTLS_SSL_OUT_CONTENT_LEN, usually `2^14` bytes) + * (Server: set maximum fragment length to emit, + * usually negotiated by the client during handshake) + * (Client: set maximum fragment length to emit *and* + * negotiate with the server during handshake) + * (Default: #MBEDTLS_SSL_MAX_FRAG_LEN_NONE) + * + * \note On the client side, the maximum fragment length extension + * *will not* be used, unless the maximum fragment length has + * been set via this function to a value different than + * #MBEDTLS_SSL_MAX_FRAG_LEN_NONE. + * + * \note This sets the maximum length for a record's payload, + * excluding record overhead that will be added to it, see + * \c mbedtls_ssl_get_record_expansion(). + * + * \note With TLS, this currently only affects ApplicationData (sent + * with \c mbedtls_ssl_read()), not handshake messages. + * With DTLS, this affects both ApplicationData and handshake. + * + * \note For DTLS, it is also possible to set a limit for the total + * size of daragrams passed to the transport layer, including + * record overhead, see \c mbedtls_ssl_set_mtu(). + * + * \param conf SSL configuration + * \param mfl_code Code for maximum fragment length (allowed values: + * MBEDTLS_SSL_MAX_FRAG_LEN_512, MBEDTLS_SSL_MAX_FRAG_LEN_1024, + * MBEDTLS_SSL_MAX_FRAG_LEN_2048, MBEDTLS_SSL_MAX_FRAG_LEN_4096) + * + * \return 0 if successful or MBEDTLS_ERR_SSL_BAD_INPUT_DATA + */ +int mbedtls_ssl_conf_max_frag_len( mbedtls_ssl_config *conf, unsigned char mfl_code ); +#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ + +#if defined(MBEDTLS_SSL_TRUNCATED_HMAC) +/** + * \brief Activate negotiation of truncated HMAC + * (Default: MBEDTLS_SSL_TRUNC_HMAC_DISABLED) + * + * \param conf SSL configuration + * \param truncate Enable or disable (MBEDTLS_SSL_TRUNC_HMAC_ENABLED or + * MBEDTLS_SSL_TRUNC_HMAC_DISABLED) + */ +void mbedtls_ssl_conf_truncated_hmac( mbedtls_ssl_config *conf, int truncate ); +#endif /* MBEDTLS_SSL_TRUNCATED_HMAC */ + +#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING) +/** + * \brief Enable / Disable 1/n-1 record splitting + * (Default: MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED) + * + * \note Only affects SSLv3 and TLS 1.0, not higher versions. + * Does not affect non-CBC ciphersuites in any version. + * + * \param conf SSL configuration + * \param split MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED or + * MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED + */ +void mbedtls_ssl_conf_cbc_record_splitting( mbedtls_ssl_config *conf, char split ); +#endif /* MBEDTLS_SSL_CBC_RECORD_SPLITTING */ + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Enable / Disable session tickets (client only). + * (Default: MBEDTLS_SSL_SESSION_TICKETS_ENABLED.) + * + * \note On server, use \c mbedtls_ssl_conf_session_tickets_cb(). + * + * \param conf SSL configuration + * \param use_tickets Enable or disable (MBEDTLS_SSL_SESSION_TICKETS_ENABLED or + * MBEDTLS_SSL_SESSION_TICKETS_DISABLED) + */ +void mbedtls_ssl_conf_session_tickets( mbedtls_ssl_config *conf, int use_tickets ); +#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */ + +#if defined(MBEDTLS_SSL_RENEGOTIATION) +/** + * \brief Enable / Disable renegotiation support for connection when + * initiated by peer + * (Default: MBEDTLS_SSL_RENEGOTIATION_DISABLED) + * + * \warning It is recommended to always disable renegotation unless you + * know you need it and you know what you're doing. In the + * past, there have been several issues associated with + * renegotiation or a poor understanding of its properties. + * + * \note Server-side, enabling renegotiation also makes the server + * susceptible to a resource DoS by a malicious client. + * + * \param conf SSL configuration + * \param renegotiation Enable or disable (MBEDTLS_SSL_RENEGOTIATION_ENABLED or + * MBEDTLS_SSL_RENEGOTIATION_DISABLED) + */ +void mbedtls_ssl_conf_renegotiation( mbedtls_ssl_config *conf, int renegotiation ); +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + +/** + * \brief Prevent or allow legacy renegotiation. + * (Default: MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION) + * + * MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION allows connections to + * be established even if the peer does not support + * secure renegotiation, but does not allow renegotiation + * to take place if not secure. + * (Interoperable and secure option) + * + * MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION allows renegotiations + * with non-upgraded peers. Allowing legacy renegotiation + * makes the connection vulnerable to specific man in the + * middle attacks. (See RFC 5746) + * (Most interoperable and least secure option) + * + * MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE breaks off connections + * if peer does not support secure renegotiation. Results + * in interoperability issues with non-upgraded peers + * that do not support renegotiation altogether. + * (Most secure option, interoperability issues) + * + * \param conf SSL configuration + * \param allow_legacy Prevent or allow (SSL_NO_LEGACY_RENEGOTIATION, + * SSL_ALLOW_LEGACY_RENEGOTIATION or + * MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE) + */ +void mbedtls_ssl_conf_legacy_renegotiation( mbedtls_ssl_config *conf, int allow_legacy ); + +#if defined(MBEDTLS_SSL_RENEGOTIATION) +/** + * \brief Enforce renegotiation requests. + * (Default: enforced, max_records = 16) + * + * When we request a renegotiation, the peer can comply or + * ignore the request. This function allows us to decide + * whether to enforce our renegotiation requests by closing + * the connection if the peer doesn't comply. + * + * However, records could already be in transit from the peer + * when the request is emitted. In order to increase + * reliability, we can accept a number of records before the + * expected handshake records. + * + * The optimal value is highly dependent on the specific usage + * scenario. + * + * \note With DTLS and server-initiated renegotiation, the + * HelloRequest is retransmited every time mbedtls_ssl_read() times + * out or receives Application Data, until: + * - max_records records have beens seen, if it is >= 0, or + * - the number of retransmits that would happen during an + * actual handshake has been reached. + * Please remember the request might be lost a few times + * if you consider setting max_records to a really low value. + * + * \warning On client, the grace period can only happen during + * mbedtls_ssl_read(), as opposed to mbedtls_ssl_write() and mbedtls_ssl_renegotiate() + * which always behave as if max_record was 0. The reason is, + * if we receive application data from the server, we need a + * place to write it, which only happens during mbedtls_ssl_read(). + * + * \param conf SSL configuration + * \param max_records Use MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED if you don't want to + * enforce renegotiation, or a non-negative value to enforce + * it but allow for a grace period of max_records records. + */ +void mbedtls_ssl_conf_renegotiation_enforced( mbedtls_ssl_config *conf, int max_records ); + +/** + * \brief Set record counter threshold for periodic renegotiation. + * (Default: 2^48 - 1) + * + * Renegotiation is automatically triggered when a record + * counter (outgoing or ingoing) crosses the defined + * threshold. The default value is meant to prevent the + * connection from being closed when the counter is about to + * reached its maximal value (it is not allowed to wrap). + * + * Lower values can be used to enforce policies such as "keys + * must be refreshed every N packets with cipher X". + * + * The renegotiation period can be disabled by setting + * conf->disable_renegotiation to + * MBEDTLS_SSL_RENEGOTIATION_DISABLED. + * + * \note When the configured transport is + * MBEDTLS_SSL_TRANSPORT_DATAGRAM the maximum renegotiation + * period is 2^48 - 1, and for MBEDTLS_SSL_TRANSPORT_STREAM, + * the maximum renegotiation period is 2^64 - 1. + * + * \param conf SSL configuration + * \param period The threshold value: a big-endian 64-bit number. + */ +void mbedtls_ssl_conf_renegotiation_period( mbedtls_ssl_config *conf, + const unsigned char period[8] ); +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + +/** + * \brief Check if there is data already read from the + * underlying transport but not yet processed. + * + * \param ssl SSL context + * + * \return 0 if nothing's pending, 1 otherwise. + * + * \note This is different in purpose and behaviour from + * \c mbedtls_ssl_get_bytes_avail in that it considers + * any kind of unprocessed data, not only unread + * application data. If \c mbedtls_ssl_get_bytes + * returns a non-zero value, this function will + * also signal pending data, but the converse does + * not hold. For example, in DTLS there might be + * further records waiting to be processed from + * the current underlying transport's datagram. + * + * \note If this function returns 1 (data pending), this + * does not imply that a subsequent call to + * \c mbedtls_ssl_read will provide any data; + * e.g., the unprocessed data might turn out + * to be an alert or a handshake message. + * + * \note This function is useful in the following situation: + * If the SSL/TLS module successfully returns from an + * operation - e.g. a handshake or an application record + * read - and you're awaiting incoming data next, you + * must not immediately idle on the underlying transport + * to have data ready, but you need to check the value + * of this function first. The reason is that the desired + * data might already be read but not yet processed. + * If, in contrast, a previous call to the SSL/TLS module + * returned MBEDTLS_ERR_SSL_WANT_READ, it is not necessary + * to call this function, as the latter error code entails + * that all internal data has been processed. + * + */ +int mbedtls_ssl_check_pending( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the number of application data bytes + * remaining to be read from the current record. + * + * \param ssl SSL context + * + * \return How many bytes are available in the application + * data record read buffer. + * + * \note When working over a datagram transport, this is + * useful to detect the current datagram's boundary + * in case \c mbedtls_ssl_read has written the maximal + * amount of data fitting into the input buffer. + * + */ +size_t mbedtls_ssl_get_bytes_avail( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the result of the certificate verification + * + * \param ssl The SSL context to use. + * + * \return \c 0 if the certificate verification was successful. + * \return \c -1u if the result is not available. This may happen + * e.g. if the handshake aborts early, or a verification + * callback returned a fatal error. + * \return A bitwise combination of \c MBEDTLS_X509_BADCERT_XXX + * and \c MBEDTLS_X509_BADCRL_XXX failure flags; see x509.h. + */ +uint32_t mbedtls_ssl_get_verify_result( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the name of the current ciphersuite + * + * \param ssl SSL context + * + * \return a string containing the ciphersuite name + */ +const char *mbedtls_ssl_get_ciphersuite( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the current SSL version (SSLv3/TLSv1/etc) + * + * \param ssl SSL context + * + * \return a string containing the SSL version + */ +const char *mbedtls_ssl_get_version( const mbedtls_ssl_context *ssl ); + +/** + * \brief Return the (maximum) number of bytes added by the record + * layer: header + encryption/MAC overhead (inc. padding) + * + * \note This function is not available (always returns an error) + * when record compression is enabled. + * + * \param ssl SSL context + * + * \return Current maximum record expansion in bytes, or + * MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE if compression is + * enabled, which makes expansion much less predictable + */ +int mbedtls_ssl_get_record_expansion( const mbedtls_ssl_context *ssl ); + +#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH) +/** + * \brief Return the maximum fragment length (payload, in bytes). + * This is the value negotiated with peer if any, + * or the locally configured value. + * + * \sa mbedtls_ssl_conf_max_frag_len() + * \sa mbedtls_ssl_get_max_record_payload() + * + * \param ssl SSL context + * + * \return Current maximum fragment length. + */ +size_t mbedtls_ssl_get_max_frag_len( const mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */ + +/** + * \brief Return the current maximum outgoing record payload in bytes. + * This takes into account the config.h setting \c + * MBEDTLS_SSL_OUT_CONTENT_LEN, the configured and negotiated + * max fragment length extension if used, and for DTLS the + * path MTU as configured and current record expansion. + * + * \note With DTLS, \c mbedtls_ssl_write() will return an error if + * called with a larger length value. + * With TLS, \c mbedtls_ssl_write() will fragment the input if + * necessary and return the number of bytes written; it is up + * to the caller to call \c mbedtls_ssl_write() again in + * order to send the remaining bytes if any. + * + * \note This function is not available (always returns an error) + * when record compression is enabled. + * + * \sa mbedtls_ssl_set_mtu() + * \sa mbedtls_ssl_get_max_frag_len() + * \sa mbedtls_ssl_get_record_expansion() + * + * \param ssl SSL context + * + * \return Current maximum payload for an outgoing record, + * or a negative error code. + */ +int mbedtls_ssl_get_max_out_record_payload( const mbedtls_ssl_context *ssl ); + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * \brief Return the peer certificate from the current connection + * + * Note: Can be NULL in case no certificate was sent during + * the handshake. Different calls for the same connection can + * return the same or different pointers for the same + * certificate and even a different certificate altogether. + * The peer cert CAN change in a single connection if + * renegotiation is performed. + * + * \param ssl SSL context + * + * \return the current peer certificate + */ +const mbedtls_x509_crt *mbedtls_ssl_get_peer_cert( const mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_CLI_C) +/** + * \brief Save session in order to resume it later (client-side only) + * Session data is copied to presented session structure. + * + * + * \param ssl SSL context + * \param session session context + * + * \return 0 if successful, + * MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed, + * MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used server-side or + * arguments are otherwise invalid. + * + * \note Only the server certificate is copied, and not the full chain, + * so you should not attempt to validate the certificate again + * by calling \c mbedtls_x509_crt_verify() on it. + * Instead, you should use the results from the verification + * in the original handshake by calling \c mbedtls_ssl_get_verify_result() + * after loading the session again into a new SSL context + * using \c mbedtls_ssl_set_session(). + * + * \note Once the session object is not needed anymore, you should + * free it by calling \c mbedtls_ssl_session_free(). + * + * \sa mbedtls_ssl_set_session() + */ +int mbedtls_ssl_get_session( const mbedtls_ssl_context *ssl, mbedtls_ssl_session *session ); +#endif /* MBEDTLS_SSL_CLI_C */ + +/** + * \brief Perform the SSL handshake + * + * \param ssl SSL context + * + * \return \c 0 if successful. + * \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE + * if the handshake is incomplete and waiting for data to + * be available for reading from or writing to the underlying + * transport - in this case you must call this function again + * when the underlying transport is ready for the operation. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous + * operation is in progress (see + * mbedtls_ssl_conf_async_private_cb()) - in this case you + * must call this function again when the operation is ready. + * \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic + * operation is in progress (see mbedtls_ecp_set_max_ops()) - + * in this case you must call this function again to complete + * the handshake when you're done attending other tasks. + * \return #MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED if DTLS is in use + * and the client did not demonstrate reachability yet - in + * this case you must stop using the context (see below). + * \return Another SSL error code - in this case you must stop using + * the context (see below). + * + * \warning If this function returns something other than + * \c 0, + * #MBEDTLS_ERR_SSL_WANT_READ, + * #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, + * you must stop using the SSL context for reading or writing, + * and either free it or call \c mbedtls_ssl_session_reset() + * on it before re-using it for a new connection; the current + * connection must be closed. + * + * \note If DTLS is in use, then you may choose to handle + * #MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED specially for logging + * purposes, as it is an expected return value rather than an + * actual error, but you still need to reset/free the context. + * + * \note Remarks regarding event-driven DTLS: + * If the function returns #MBEDTLS_ERR_SSL_WANT_READ, no datagram + * from the underlying transport layer is currently being processed, + * and it is safe to idle until the timer or the underlying transport + * signal a new event. This is not true for a successful handshake, + * in which case the datagram of the underlying transport that is + * currently being processed might or might not contain further + * DTLS records. + */ +int mbedtls_ssl_handshake( mbedtls_ssl_context *ssl ); + +/** + * \brief Perform a single step of the SSL handshake + * + * \note The state of the context (ssl->state) will be at + * the next state after this function returns \c 0. Do not + * call this function if state is MBEDTLS_SSL_HANDSHAKE_OVER. + * + * \param ssl SSL context + * + * \return See mbedtls_ssl_handshake(). + * + * \warning If this function returns something other than \c 0, + * #MBEDTLS_ERR_SSL_WANT_READ, #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, you must stop using + * the SSL context for reading or writing, and either free it + * or call \c mbedtls_ssl_session_reset() on it before + * re-using it for a new connection; the current connection + * must be closed. + */ +int mbedtls_ssl_handshake_step( mbedtls_ssl_context *ssl ); + +#if defined(MBEDTLS_SSL_RENEGOTIATION) +/** + * \brief Initiate an SSL renegotiation on the running connection. + * Client: perform the renegotiation right now. + * Server: request renegotiation, which will be performed + * during the next call to mbedtls_ssl_read() if honored by + * client. + * + * \param ssl SSL context + * + * \return 0 if successful, or any mbedtls_ssl_handshake() return + * value except #MBEDTLS_ERR_SSL_CLIENT_RECONNECT that can't + * happen during a renegotiation. + * + * \warning If this function returns something other than \c 0, + * #MBEDTLS_ERR_SSL_WANT_READ, #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, you must stop using + * the SSL context for reading or writing, and either free it + * or call \c mbedtls_ssl_session_reset() on it before + * re-using it for a new connection; the current connection + * must be closed. + * + */ +int mbedtls_ssl_renegotiate( mbedtls_ssl_context *ssl ); +#endif /* MBEDTLS_SSL_RENEGOTIATION */ + +/** + * \brief Read at most 'len' application data bytes + * + * \param ssl SSL context + * \param buf buffer that will hold the data + * \param len maximum number of bytes to read + * + * \return The (positive) number of bytes read if successful. + * \return \c 0 if the read end of the underlying transport was closed + * - in this case you must stop using the context (see below). + * \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE + * if the handshake is incomplete and waiting for data to + * be available for reading from or writing to the underlying + * transport - in this case you must call this function again + * when the underlying transport is ready for the operation. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous + * operation is in progress (see + * mbedtls_ssl_conf_async_private_cb()) - in this case you + * must call this function again when the operation is ready. + * \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic + * operation is in progress (see mbedtls_ecp_set_max_ops()) - + * in this case you must call this function again to complete + * the handshake when you're done attending other tasks. + * \return #MBEDTLS_ERR_SSL_CLIENT_RECONNECT if we're at the server + * side of a DTLS connection and the client is initiating a + * new connection using the same source port. See below. + * \return Another SSL error code - in this case you must stop using + * the context (see below). + * + * \warning If this function returns something other than + * a positive value, + * #MBEDTLS_ERR_SSL_WANT_READ, + * #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS, + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CLIENT_RECONNECT, + * you must stop using the SSL context for reading or writing, + * and either free it or call \c mbedtls_ssl_session_reset() + * on it before re-using it for a new connection; the current + * connection must be closed. + * + * \note When this function returns #MBEDTLS_ERR_SSL_CLIENT_RECONNECT + * (which can only happen server-side), it means that a client + * is initiating a new connection using the same source port. + * You can either treat that as a connection close and wait + * for the client to resend a ClientHello, or directly + * continue with \c mbedtls_ssl_handshake() with the same + * context (as it has been reset internally). Either way, you + * must make sure this is seen by the application as a new + * connection: application state, if any, should be reset, and + * most importantly the identity of the client must be checked + * again. WARNING: not validating the identity of the client + * again, or not transmitting the new identity to the + * application layer, would allow authentication bypass! + * + * \note Remarks regarding event-driven DTLS: + * - If the function returns #MBEDTLS_ERR_SSL_WANT_READ, no datagram + * from the underlying transport layer is currently being processed, + * and it is safe to idle until the timer or the underlying transport + * signal a new event. + * - This function may return MBEDTLS_ERR_SSL_WANT_READ even if data was + * initially available on the underlying transport, as this data may have + * been only e.g. duplicated messages or a renegotiation request. + * Therefore, you must be prepared to receive MBEDTLS_ERR_SSL_WANT_READ even + * when reacting to an incoming-data event from the underlying transport. + * - On success, the datagram of the underlying transport that is currently + * being processed may contain further DTLS records. You should call + * \c mbedtls_ssl_check_pending to check for remaining records. + * + */ +int mbedtls_ssl_read( mbedtls_ssl_context *ssl, unsigned char *buf, size_t len ); + +/** + * \brief Try to write exactly 'len' application data bytes + * + * \warning This function will do partial writes in some cases. If the + * return value is non-negative but less than length, the + * function must be called again with updated arguments: + * buf + ret, len - ret (if ret is the return value) until + * it returns a value equal to the last 'len' argument. + * + * \param ssl SSL context + * \param buf buffer holding the data + * \param len how many bytes must be written + * + * \return The (non-negative) number of bytes actually written if + * successful (may be less than \p len). + * \return #MBEDTLS_ERR_SSL_WANT_READ or #MBEDTLS_ERR_SSL_WANT_WRITE + * if the handshake is incomplete and waiting for data to + * be available for reading from or writing to the underlying + * transport - in this case you must call this function again + * when the underlying transport is ready for the operation. + * \return #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS if an asynchronous + * operation is in progress (see + * mbedtls_ssl_conf_async_private_cb()) - in this case you + * must call this function again when the operation is ready. + * \return #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS if a cryptographic + * operation is in progress (see mbedtls_ecp_set_max_ops()) - + * in this case you must call this function again to complete + * the handshake when you're done attending other tasks. + * \return Another SSL error code - in this case you must stop using + * the context (see below). + * + * \warning If this function returns something other than + * a non-negative value, + * #MBEDTLS_ERR_SSL_WANT_READ, + * #MBEDTLS_ERR_SSL_WANT_WRITE, + * #MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS or + * #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS, + * you must stop using the SSL context for reading or writing, + * and either free it or call \c mbedtls_ssl_session_reset() + * on it before re-using it for a new connection; the current + * connection must be closed. + * + * \note When this function returns #MBEDTLS_ERR_SSL_WANT_WRITE/READ, + * it must be called later with the *same* arguments, + * until it returns a value greater that or equal to 0. When + * the function returns #MBEDTLS_ERR_SSL_WANT_WRITE there may be + * some partial data in the output buffer, however this is not + * yet sent. + * + * \note If the requested length is greater than the maximum + * fragment length (either the built-in limit or the one set + * or negotiated with the peer), then: + * - with TLS, less bytes than requested are written. + * - with DTLS, MBEDTLS_ERR_SSL_BAD_INPUT_DATA is returned. + * \c mbedtls_ssl_get_max_frag_len() may be used to query the + * active maximum fragment length. + * + * \note Attempting to write 0 bytes will result in an empty TLS + * application record being sent. + */ +int mbedtls_ssl_write( mbedtls_ssl_context *ssl, const unsigned char *buf, size_t len ); + +/** + * \brief Send an alert message + * + * \param ssl SSL context + * \param level The alert level of the message + * (MBEDTLS_SSL_ALERT_LEVEL_WARNING or MBEDTLS_SSL_ALERT_LEVEL_FATAL) + * \param message The alert message (SSL_ALERT_MSG_*) + * + * \return 0 if successful, or a specific SSL error code. + * + * \note If this function returns something other than 0 or + * MBEDTLS_ERR_SSL_WANT_READ/WRITE, you must stop using + * the SSL context for reading or writing, and either free it or + * call \c mbedtls_ssl_session_reset() on it before re-using it + * for a new connection; the current connection must be closed. + */ +int mbedtls_ssl_send_alert_message( mbedtls_ssl_context *ssl, + unsigned char level, + unsigned char message ); +/** + * \brief Notify the peer that the connection is being closed + * + * \param ssl SSL context + * + * \return 0 if successful, or a specific SSL error code. + * + * \note If this function returns something other than 0 or + * MBEDTLS_ERR_SSL_WANT_READ/WRITE, you must stop using + * the SSL context for reading or writing, and either free it or + * call \c mbedtls_ssl_session_reset() on it before re-using it + * for a new connection; the current connection must be closed. + */ +int mbedtls_ssl_close_notify( mbedtls_ssl_context *ssl ); + +/** + * \brief Free referenced items in an SSL context and clear memory + * + * \param ssl SSL context + */ +void mbedtls_ssl_free( mbedtls_ssl_context *ssl ); + +/** + * \brief Initialize an SSL configuration context + * Just makes the context ready for + * mbedtls_ssl_config_defaults() or mbedtls_ssl_config_free(). + * + * \note You need to call mbedtls_ssl_config_defaults() unless you + * manually set all of the relevent fields yourself. + * + * \param conf SSL configuration context + */ +void mbedtls_ssl_config_init( mbedtls_ssl_config *conf ); + +/** + * \brief Load reasonnable default SSL configuration values. + * (You need to call mbedtls_ssl_config_init() first.) + * + * \param conf SSL configuration context + * \param endpoint MBEDTLS_SSL_IS_CLIENT or MBEDTLS_SSL_IS_SERVER + * \param transport MBEDTLS_SSL_TRANSPORT_STREAM for TLS, or + * MBEDTLS_SSL_TRANSPORT_DATAGRAM for DTLS + * \param preset a MBEDTLS_SSL_PRESET_XXX value + * + * \note See \c mbedtls_ssl_conf_transport() for notes on DTLS. + * + * \return 0 if successful, or + * MBEDTLS_ERR_XXX_ALLOC_FAILED on memory allocation error. + */ +int mbedtls_ssl_config_defaults( mbedtls_ssl_config *conf, + int endpoint, int transport, int preset ); + +/** + * \brief Free an SSL configuration context + * + * \param conf SSL configuration context + */ +void mbedtls_ssl_config_free( mbedtls_ssl_config *conf ); + +/** + * \brief Initialize SSL session structure + * + * \param session SSL session + */ +void mbedtls_ssl_session_init( mbedtls_ssl_session *session ); + +/** + * \brief Free referenced items in an SSL session including the + * peer certificate and clear memory + * + * \note A session object can be freed even if the SSL context + * that was used to retrieve the session is still in use. + * + * \param session SSL session + */ +void mbedtls_ssl_session_free( mbedtls_ssl_session *session ); + +#ifdef __cplusplus +} +#endif + +#endif /* ssl.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_cache.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_cache.h new file mode 100644 index 000000000..52ba0948c --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_cache.h @@ -0,0 +1,150 @@ +/** + * \file ssl_cache.h + * + * \brief SSL session cache implementation + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SSL_CACHE_H +#define MBEDTLS_SSL_CACHE_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "ssl.h" + +#if defined(MBEDTLS_THREADING_C) +#include "threading.h" +#endif + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ + +#if !defined(MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT) +#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /*!< 1 day */ +#endif + +#if !defined(MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES) +#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /*!< Maximum entries in cache */ +#endif + +/* \} name SECTION: Module settings */ + +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct mbedtls_ssl_cache_context mbedtls_ssl_cache_context; +typedef struct mbedtls_ssl_cache_entry mbedtls_ssl_cache_entry; + +/** + * \brief This structure is used for storing cache entries + */ +struct mbedtls_ssl_cache_entry +{ +#if defined(MBEDTLS_HAVE_TIME) + mbedtls_time_t timestamp; /*!< entry timestamp */ +#endif + mbedtls_ssl_session session; /*!< entry session */ +#if defined(MBEDTLS_X509_CRT_PARSE_C) + mbedtls_x509_buf peer_cert; /*!< entry peer_cert */ +#endif + mbedtls_ssl_cache_entry *next; /*!< chain pointer */ +}; + +/** + * \brief Cache context + */ +struct mbedtls_ssl_cache_context +{ + mbedtls_ssl_cache_entry *chain; /*!< start of the chain */ + int timeout; /*!< cache entry timeout */ + int max_entries; /*!< maximum entries */ +#if defined(MBEDTLS_THREADING_C) + mbedtls_threading_mutex_t mutex; /*!< mutex */ +#endif +}; + +/** + * \brief Initialize an SSL cache context + * + * \param cache SSL cache context + */ +void mbedtls_ssl_cache_init( mbedtls_ssl_cache_context *cache ); + +/** + * \brief Cache get callback implementation + * (Thread-safe if MBEDTLS_THREADING_C is enabled) + * + * \param data SSL cache context + * \param session session to retrieve entry for + */ +int mbedtls_ssl_cache_get( void *data, mbedtls_ssl_session *session ); + +/** + * \brief Cache set callback implementation + * (Thread-safe if MBEDTLS_THREADING_C is enabled) + * + * \param data SSL cache context + * \param session session to store entry for + */ +int mbedtls_ssl_cache_set( void *data, const mbedtls_ssl_session *session ); + +#if defined(MBEDTLS_HAVE_TIME) +/** + * \brief Set the cache timeout + * (Default: MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT (1 day)) + * + * A timeout of 0 indicates no timeout. + * + * \param cache SSL cache context + * \param timeout cache entry timeout in seconds + */ +void mbedtls_ssl_cache_set_timeout( mbedtls_ssl_cache_context *cache, int timeout ); +#endif /* MBEDTLS_HAVE_TIME */ + +/** + * \brief Set the maximum number of cache entries + * (Default: MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES (50)) + * + * \param cache SSL cache context + * \param max cache entry maximum + */ +void mbedtls_ssl_cache_set_max_entries( mbedtls_ssl_cache_context *cache, int max ); + +/** + * \brief Free referenced items in a cache context and clear memory + * + * \param cache SSL cache context + */ +void mbedtls_ssl_cache_free( mbedtls_ssl_cache_context *cache ); + +#ifdef __cplusplus +} +#endif + +#endif /* ssl_cache.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_ciphersuites.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_ciphersuites.h new file mode 100644 index 000000000..71053e5ba --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_ciphersuites.h @@ -0,0 +1,540 @@ +/** + * \file ssl_ciphersuites.h + * + * \brief SSL Ciphersuites for mbed TLS + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SSL_CIPHERSUITES_H +#define MBEDTLS_SSL_CIPHERSUITES_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "pk.h" +#include "cipher.h" +#include "md.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Supported ciphersuites (Official IANA names) + */ +#define MBEDTLS_TLS_RSA_WITH_NULL_MD5 0x01 /**< Weak! */ +#define MBEDTLS_TLS_RSA_WITH_NULL_SHA 0x02 /**< Weak! */ + +#define MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 0x04 +#define MBEDTLS_TLS_RSA_WITH_RC4_128_SHA 0x05 +#define MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA 0x09 /**< Weak! Not in TLS 1.2 */ + +#define MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA 0x0A + +#define MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA 0x15 /**< Weak! Not in TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA 0x16 + +#define MBEDTLS_TLS_PSK_WITH_NULL_SHA 0x2C /**< Weak! */ +#define MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA 0x2D /**< Weak! */ +#define MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA 0x2E /**< Weak! */ +#define MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA 0x2F + +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA 0x33 +#define MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA 0x35 +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA 0x39 + +#define MBEDTLS_TLS_RSA_WITH_NULL_SHA256 0x3B /**< Weak! */ +#define MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 0x3C /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 0x3D /**< TLS 1.2 */ + +#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA 0x41 +#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA 0x45 + +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 0x67 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 0x6B /**< TLS 1.2 */ + +#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA 0x84 +#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA 0x88 + +#define MBEDTLS_TLS_PSK_WITH_RC4_128_SHA 0x8A +#define MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA 0x8B +#define MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA 0x8C +#define MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA 0x8D + +#define MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA 0x8E +#define MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA 0x8F +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA 0x90 +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA 0x91 + +#define MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA 0x92 +#define MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA 0x93 +#define MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA 0x94 +#define MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA 0x95 + +#define MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 0x9C /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 0x9D /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 0x9E /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 0x9F /**< TLS 1.2 */ + +#define MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 0xA8 /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 0xA9 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 0xAA /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 0xAB /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 0xAC /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 0xAD /**< TLS 1.2 */ + +#define MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 0xAE +#define MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 0xAF +#define MBEDTLS_TLS_PSK_WITH_NULL_SHA256 0xB0 /**< Weak! */ +#define MBEDTLS_TLS_PSK_WITH_NULL_SHA384 0xB1 /**< Weak! */ + +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 0xB2 +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 0xB3 +#define MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 0xB4 /**< Weak! */ +#define MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 0xB5 /**< Weak! */ + +#define MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 0xB6 +#define MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 0xB7 +#define MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 0xB8 /**< Weak! */ +#define MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 0xB9 /**< Weak! */ + +#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 0xBA /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 0xBE /**< TLS 1.2 */ + +#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 0xC0 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 0xC4 /**< TLS 1.2 */ + +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA 0xC001 /**< Weak! */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA 0xC002 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA 0xC003 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA 0xC004 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA 0xC005 /**< Not in SSL3! */ + +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA 0xC006 /**< Weak! */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA 0xC007 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA 0xC008 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA 0xC009 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA 0xC00A /**< Not in SSL3! */ + +#define MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA 0xC00B /**< Weak! */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA 0xC00C /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA 0xC00D /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA 0xC00E /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA 0xC00F /**< Not in SSL3! */ + +#define MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA 0xC010 /**< Weak! */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA 0xC011 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA 0xC012 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA 0xC013 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA 0xC014 /**< Not in SSL3! */ + +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 0xC023 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 0xC024 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 0xC025 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 0xC026 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 0xC027 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 0xC028 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 0xC029 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 0xC02A /**< TLS 1.2 */ + +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 0xC02B /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 0xC02C /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 0xC02D /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 0xC02E /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 0xC02F /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 0xC030 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 0xC031 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 0xC032 /**< TLS 1.2 */ + +#define MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA 0xC033 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA 0xC034 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA 0xC035 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA 0xC036 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 0xC037 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 0xC038 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA 0xC039 /**< Weak! No SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 0xC03A /**< Weak! No SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 0xC03B /**< Weak! No SSL3! */ + +#define MBEDTLS_TLS_RSA_WITH_ARIA_128_CBC_SHA256 0xC03C /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_ARIA_256_CBC_SHA384 0xC03D /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_CBC_SHA256 0xC044 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_CBC_SHA384 0xC045 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_CBC_SHA256 0xC048 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_CBC_SHA384 0xC049 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_CBC_SHA256 0xC04A /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_CBC_SHA384 0xC04B /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_CBC_SHA256 0xC04C /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_CBC_SHA384 0xC04D /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_CBC_SHA256 0xC04E /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_CBC_SHA384 0xC04F /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_ARIA_128_GCM_SHA256 0xC050 /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_ARIA_256_GCM_SHA384 0xC051 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_ARIA_128_GCM_SHA256 0xC052 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_ARIA_256_GCM_SHA384 0xC053 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_128_GCM_SHA256 0xC05C /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_ARIA_256_GCM_SHA384 0xC05D /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_128_GCM_SHA256 0xC05E /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_ARIA_256_GCM_SHA384 0xC05F /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_128_GCM_SHA256 0xC060 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_ARIA_256_GCM_SHA384 0xC061 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_128_GCM_SHA256 0xC062 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_ARIA_256_GCM_SHA384 0xC063 /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_ARIA_128_CBC_SHA256 0xC064 /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_ARIA_256_CBC_SHA384 0xC065 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_CBC_SHA256 0xC066 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_CBC_SHA384 0xC067 /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_CBC_SHA256 0xC068 /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_CBC_SHA384 0xC069 /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_ARIA_128_GCM_SHA256 0xC06A /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_ARIA_256_GCM_SHA384 0xC06B /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_ARIA_128_GCM_SHA256 0xC06C /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_ARIA_256_GCM_SHA384 0xC06D /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_ARIA_128_GCM_SHA256 0xC06E /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_ARIA_256_GCM_SHA384 0xC06F /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_128_CBC_SHA256 0xC070 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_ARIA_256_CBC_SHA384 0xC071 /**< TLS 1.2 */ + +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 0xC072 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 0xC073 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 0xC074 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 0xC075 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 0xC076 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 0xC077 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 0xC078 /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 0xC079 /**< Not in SSL3! */ + +#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 0xC07A /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 0xC07B /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 0xC07C /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 0xC07D /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 0xC086 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 0xC087 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 0xC088 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 0xC089 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 0xC08A /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 0xC08B /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 0xC08C /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 0xC08D /**< TLS 1.2 */ + +#define MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 0xC08E /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 0xC08F /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 0xC090 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 0xC091 /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 0xC092 /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 0xC093 /**< TLS 1.2 */ + +#define MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 0xC094 +#define MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 0xC095 +#define MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 0xC096 +#define MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 0xC097 +#define MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 0xC098 +#define MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 0xC099 +#define MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 0xC09A /**< Not in SSL3! */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 0xC09B /**< Not in SSL3! */ + +#define MBEDTLS_TLS_RSA_WITH_AES_128_CCM 0xC09C /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_AES_256_CCM 0xC09D /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CCM 0xC09E /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CCM 0xC09F /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_AES_128_CCM_8 0xC0A0 /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_WITH_AES_256_CCM_8 0xC0A1 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CCM_8 0xC0A2 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CCM_8 0xC0A3 /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_AES_128_CCM 0xC0A4 /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_AES_256_CCM 0xC0A5 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CCM 0xC0A6 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CCM 0xC0A7 /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_AES_128_CCM_8 0xC0A8 /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_AES_256_CCM_8 0xC0A9 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CCM_8 0xC0AA /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CCM_8 0xC0AB /**< TLS 1.2 */ +/* The last two are named with PSK_DHE in the RFC, which looks like a typo */ + +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM 0xC0AC /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CCM 0xC0AD /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 0xC0AE /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CCM_8 0xC0AF /**< TLS 1.2 */ + +#define MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 0xC0FF /**< experimental */ + +/* RFC 7905 */ +#define MBEDTLS_TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 0xCCA8 /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256 0xCCA9 /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256 0xCCAA /**< TLS 1.2 */ +#define MBEDTLS_TLS_PSK_WITH_CHACHA20_POLY1305_SHA256 0xCCAB /**< TLS 1.2 */ +#define MBEDTLS_TLS_ECDHE_PSK_WITH_CHACHA20_POLY1305_SHA256 0xCCAC /**< TLS 1.2 */ +#define MBEDTLS_TLS_DHE_PSK_WITH_CHACHA20_POLY1305_SHA256 0xCCAD /**< TLS 1.2 */ +#define MBEDTLS_TLS_RSA_PSK_WITH_CHACHA20_POLY1305_SHA256 0xCCAE /**< TLS 1.2 */ + +/* Reminder: update mbedtls_ssl_premaster_secret when adding a new key exchange. + * Reminder: update MBEDTLS_KEY_EXCHANGE__xxx below + */ +typedef enum { + MBEDTLS_KEY_EXCHANGE_NONE = 0, + MBEDTLS_KEY_EXCHANGE_RSA, + MBEDTLS_KEY_EXCHANGE_DHE_RSA, + MBEDTLS_KEY_EXCHANGE_ECDHE_RSA, + MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA, + MBEDTLS_KEY_EXCHANGE_PSK, + MBEDTLS_KEY_EXCHANGE_DHE_PSK, + MBEDTLS_KEY_EXCHANGE_RSA_PSK, + MBEDTLS_KEY_EXCHANGE_ECDHE_PSK, + MBEDTLS_KEY_EXCHANGE_ECDH_RSA, + MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA, + MBEDTLS_KEY_EXCHANGE_ECJPAKE, +} mbedtls_key_exchange_type_t; + +/* Key exchanges using a certificate */ +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED +#endif + +/* Key exchanges allowing client certificate requests */ +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__CERT_REQ_ALLOWED__ENABLED +#endif + +/* Key exchanges involving server signature in ServerKeyExchange */ +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__WITH_SERVER_SIGNATURE__ENABLED +#endif + +/* Key exchanges using ECDH */ +#if defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__SOME__ECDH_ENABLED +#endif + +/* Key exchanges that don't involve ephemeral keys */ +#if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE__SOME__ECDH_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__SOME_NON_PFS__ENABLED +#endif + +/* Key exchanges that involve ephemeral keys */ +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__SOME_PFS__ENABLED +#endif + +/* Key exchanges using a PSK */ +#if defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED +#endif + +/* Key exchanges using DHE */ +#if defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__SOME__DHE_ENABLED +#endif + +/* Key exchanges using ECDHE */ +#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED) +#define MBEDTLS_KEY_EXCHANGE__SOME__ECDHE_ENABLED +#endif + +typedef struct mbedtls_ssl_ciphersuite_t mbedtls_ssl_ciphersuite_t; + +#define MBEDTLS_CIPHERSUITE_WEAK 0x01 /**< Weak ciphersuite flag */ +#define MBEDTLS_CIPHERSUITE_SHORT_TAG 0x02 /**< Short authentication tag, + eg for CCM_8 */ +#define MBEDTLS_CIPHERSUITE_NODTLS 0x04 /**< Can't be used with DTLS */ + +/** + * \brief This structure is used for storing ciphersuite information + */ +struct mbedtls_ssl_ciphersuite_t +{ + int id; + const char * name; + + mbedtls_cipher_type_t cipher; + mbedtls_md_type_t mac; + mbedtls_key_exchange_type_t key_exchange; + + int min_major_ver; + int min_minor_ver; + int max_major_ver; + int max_minor_ver; + + unsigned char flags; +}; + +const int *mbedtls_ssl_list_ciphersuites( void ); + +const mbedtls_ssl_ciphersuite_t *mbedtls_ssl_ciphersuite_from_string( const char *ciphersuite_name ); +const mbedtls_ssl_ciphersuite_t *mbedtls_ssl_ciphersuite_from_id( int ciphersuite_id ); + +#if defined(MBEDTLS_PK_C) +mbedtls_pk_type_t mbedtls_ssl_get_ciphersuite_sig_pk_alg( const mbedtls_ssl_ciphersuite_t *info ); +mbedtls_pk_type_t mbedtls_ssl_get_ciphersuite_sig_alg( const mbedtls_ssl_ciphersuite_t *info ); +#endif + +int mbedtls_ssl_ciphersuite_uses_ec( const mbedtls_ssl_ciphersuite_t *info ); +int mbedtls_ssl_ciphersuite_uses_psk( const mbedtls_ssl_ciphersuite_t *info ); + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME_PFS__ENABLED) +static inline int mbedtls_ssl_ciphersuite_has_pfs( const mbedtls_ssl_ciphersuite_t *info ) +{ + switch( info->key_exchange ) + { + case MBEDTLS_KEY_EXCHANGE_DHE_RSA: + case MBEDTLS_KEY_EXCHANGE_DHE_PSK: + case MBEDTLS_KEY_EXCHANGE_ECDHE_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDHE_PSK: + case MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA: + case MBEDTLS_KEY_EXCHANGE_ECJPAKE: + return( 1 ); + + default: + return( 0 ); + } +} +#endif /* MBEDTLS_KEY_EXCHANGE__SOME_PFS__ENABLED */ + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME_NON_PFS__ENABLED) +static inline int mbedtls_ssl_ciphersuite_no_pfs( const mbedtls_ssl_ciphersuite_t *info ) +{ + switch( info->key_exchange ) + { + case MBEDTLS_KEY_EXCHANGE_ECDH_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA: + case MBEDTLS_KEY_EXCHANGE_RSA: + case MBEDTLS_KEY_EXCHANGE_PSK: + case MBEDTLS_KEY_EXCHANGE_RSA_PSK: + return( 1 ); + + default: + return( 0 ); + } +} +#endif /* MBEDTLS_KEY_EXCHANGE__SOME_NON_PFS__ENABLED */ + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME__ECDH_ENABLED) +static inline int mbedtls_ssl_ciphersuite_uses_ecdh( const mbedtls_ssl_ciphersuite_t *info ) +{ + switch( info->key_exchange ) + { + case MBEDTLS_KEY_EXCHANGE_ECDH_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA: + return( 1 ); + + default: + return( 0 ); + } +} +#endif /* MBEDTLS_KEY_EXCHANGE__SOME__ECDH_ENABLED */ + +static inline int mbedtls_ssl_ciphersuite_cert_req_allowed( const mbedtls_ssl_ciphersuite_t *info ) +{ + switch( info->key_exchange ) + { + case MBEDTLS_KEY_EXCHANGE_RSA: + case MBEDTLS_KEY_EXCHANGE_DHE_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDH_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDHE_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA: + case MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA: + return( 1 ); + + default: + return( 0 ); + } +} + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME__DHE_ENABLED) +static inline int mbedtls_ssl_ciphersuite_uses_dhe( const mbedtls_ssl_ciphersuite_t *info ) +{ + switch( info->key_exchange ) + { + case MBEDTLS_KEY_EXCHANGE_DHE_RSA: + case MBEDTLS_KEY_EXCHANGE_DHE_PSK: + return( 1 ); + + default: + return( 0 ); + } +} +#endif /* MBEDTLS_KEY_EXCHANGE__SOME__DHE_ENABLED) */ + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME__ECDHE_ENABLED) +static inline int mbedtls_ssl_ciphersuite_uses_ecdhe( const mbedtls_ssl_ciphersuite_t *info ) +{ + switch( info->key_exchange ) + { + case MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA: + case MBEDTLS_KEY_EXCHANGE_ECDHE_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDHE_PSK: + return( 1 ); + + default: + return( 0 ); + } +} +#endif /* MBEDTLS_KEY_EXCHANGE__SOME__ECDHE_ENABLED) */ + +#if defined(MBEDTLS_KEY_EXCHANGE__WITH_SERVER_SIGNATURE__ENABLED) +static inline int mbedtls_ssl_ciphersuite_uses_server_signature( const mbedtls_ssl_ciphersuite_t *info ) +{ + switch( info->key_exchange ) + { + case MBEDTLS_KEY_EXCHANGE_DHE_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDHE_RSA: + case MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA: + return( 1 ); + + default: + return( 0 ); + } +} +#endif /* MBEDTLS_KEY_EXCHANGE__WITH_SERVER_SIGNATURE__ENABLED */ + +#ifdef __cplusplus +} +#endif + +#endif /* ssl_ciphersuites.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_cookie.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_cookie.h new file mode 100644 index 000000000..e34760ae8 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_cookie.h @@ -0,0 +1,115 @@ +/** + * \file ssl_cookie.h + * + * \brief DTLS cookie callbacks implementation + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SSL_COOKIE_H +#define MBEDTLS_SSL_COOKIE_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "ssl.h" + +#if defined(MBEDTLS_THREADING_C) +#include "threading.h" +#endif + +/** + * \name SECTION: Module settings + * + * The configuration options you can set for this module are in this section. + * Either change them in config.h or define them on the compiler command line. + * \{ + */ +#ifndef MBEDTLS_SSL_COOKIE_TIMEOUT +#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */ +#endif + +/* \} name SECTION: Module settings */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Context for the default cookie functions. + */ +typedef struct mbedtls_ssl_cookie_ctx +{ + mbedtls_md_context_t hmac_ctx; /*!< context for the HMAC portion */ +#if !defined(MBEDTLS_HAVE_TIME) + unsigned long serial; /*!< serial number for expiration */ +#endif + unsigned long timeout; /*!< timeout delay, in seconds if HAVE_TIME, + or in number of tickets issued */ + +#if defined(MBEDTLS_THREADING_C) + mbedtls_threading_mutex_t mutex; +#endif +} mbedtls_ssl_cookie_ctx; + +/** + * \brief Initialize cookie context + */ +void mbedtls_ssl_cookie_init( mbedtls_ssl_cookie_ctx *ctx ); + +/** + * \brief Setup cookie context (generate keys) + */ +int mbedtls_ssl_cookie_setup( mbedtls_ssl_cookie_ctx *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +/** + * \brief Set expiration delay for cookies + * (Default MBEDTLS_SSL_COOKIE_TIMEOUT) + * + * \param ctx Cookie contex + * \param delay Delay, in seconds if HAVE_TIME, or in number of cookies + * issued in the meantime. + * 0 to disable expiration (NOT recommended) + */ +void mbedtls_ssl_cookie_set_timeout( mbedtls_ssl_cookie_ctx *ctx, unsigned long delay ); + +/** + * \brief Free cookie context + */ +void mbedtls_ssl_cookie_free( mbedtls_ssl_cookie_ctx *ctx ); + +/** + * \brief Generate cookie, see \c mbedtls_ssl_cookie_write_t + */ +mbedtls_ssl_cookie_write_t mbedtls_ssl_cookie_write; + +/** + * \brief Verify cookie, see \c mbedtls_ssl_cookie_write_t + */ +mbedtls_ssl_cookie_check_t mbedtls_ssl_cookie_check; + +#ifdef __cplusplus +} +#endif + +#endif /* ssl_cookie.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_internal.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_internal.h new file mode 100644 index 000000000..bd5ad94db --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_internal.h @@ -0,0 +1,782 @@ +/** + * \file ssl_internal.h + * + * \brief Internal functions shared by the SSL modules + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SSL_INTERNAL_H +#define MBEDTLS_SSL_INTERNAL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "ssl.h" +#include "cipher.h" + +#if defined(MBEDTLS_MD5_C) +#include "md5.h" +#endif + +#if defined(MBEDTLS_SHA1_C) +#include "sha1.h" +#endif + +#if defined(MBEDTLS_SHA256_C) +#include "sha256.h" +#endif + +#if defined(MBEDTLS_SHA512_C) +#include "sha512.h" +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) +#include "ecjpake.h" +#endif + +#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \ + !defined(inline) && !defined(__cplusplus) +#define inline __inline +#endif + +/* Determine minimum supported version */ +#define MBEDTLS_SSL_MIN_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3 + +#if defined(MBEDTLS_SSL_PROTO_SSL3) +#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_0 +#else +#if defined(MBEDTLS_SSL_PROTO_TLS1) +#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1 +#else +#if defined(MBEDTLS_SSL_PROTO_TLS1_1) +#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2 +#else +#if defined(MBEDTLS_SSL_PROTO_TLS1_2) +#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3 +#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ +#endif /* MBEDTLS_SSL_PROTO_TLS1_1 */ +#endif /* MBEDTLS_SSL_PROTO_TLS1 */ +#endif /* MBEDTLS_SSL_PROTO_SSL3 */ + +#define MBEDTLS_SSL_MIN_VALID_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1 +#define MBEDTLS_SSL_MIN_VALID_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3 + +/* Determine maximum supported version */ +#define MBEDTLS_SSL_MAX_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3 + +#if defined(MBEDTLS_SSL_PROTO_TLS1_2) +#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3 +#else +#if defined(MBEDTLS_SSL_PROTO_TLS1_1) +#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2 +#else +#if defined(MBEDTLS_SSL_PROTO_TLS1) +#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1 +#else +#if defined(MBEDTLS_SSL_PROTO_SSL3) +#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_0 +#endif /* MBEDTLS_SSL_PROTO_SSL3 */ +#endif /* MBEDTLS_SSL_PROTO_TLS1 */ +#endif /* MBEDTLS_SSL_PROTO_TLS1_1 */ +#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ + +/* Shorthand for restartable ECC */ +#if defined(MBEDTLS_ECP_RESTARTABLE) && \ + defined(MBEDTLS_SSL_CLI_C) && \ + defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ + defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) +#define MBEDTLS_SSL__ECP_RESTARTABLE +#endif + +#define MBEDTLS_SSL_INITIAL_HANDSHAKE 0 +#define MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS 1 /* In progress */ +#define MBEDTLS_SSL_RENEGOTIATION_DONE 2 /* Done or aborted */ +#define MBEDTLS_SSL_RENEGOTIATION_PENDING 3 /* Requested (server only) */ + +/* + * DTLS retransmission states, see RFC 6347 4.2.4 + * + * The SENDING state is merged in PREPARING for initial sends, + * but is distinct for resends. + * + * Note: initial state is wrong for server, but is not used anyway. + */ +#define MBEDTLS_SSL_RETRANS_PREPARING 0 +#define MBEDTLS_SSL_RETRANS_SENDING 1 +#define MBEDTLS_SSL_RETRANS_WAITING 2 +#define MBEDTLS_SSL_RETRANS_FINISHED 3 + +/* + * Allow extra bytes for record, authentication and encryption overhead: + * counter (8) + header (5) + IV(16) + MAC (16-48) + padding (0-256) + * and allow for a maximum of 1024 of compression expansion if + * enabled. + */ +#if defined(MBEDTLS_ZLIB_SUPPORT) +#define MBEDTLS_SSL_COMPRESSION_ADD 1024 +#else +#define MBEDTLS_SSL_COMPRESSION_ADD 0 +#endif + +#if defined(MBEDTLS_ARC4_C) || defined(MBEDTLS_CIPHER_MODE_CBC) +/* Ciphersuites using HMAC */ +#if defined(MBEDTLS_SHA512_C) +#define MBEDTLS_SSL_MAC_ADD 48 /* SHA-384 used for HMAC */ +#elif defined(MBEDTLS_SHA256_C) +#define MBEDTLS_SSL_MAC_ADD 32 /* SHA-256 used for HMAC */ +#else +#define MBEDTLS_SSL_MAC_ADD 20 /* SHA-1 used for HMAC */ +#endif +#else +/* AEAD ciphersuites: GCM and CCM use a 128 bits tag */ +#define MBEDTLS_SSL_MAC_ADD 16 +#endif + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +#define MBEDTLS_SSL_PADDING_ADD 256 +#else +#define MBEDTLS_SSL_PADDING_ADD 0 +#endif + +#define MBEDTLS_SSL_PAYLOAD_OVERHEAD ( MBEDTLS_SSL_COMPRESSION_ADD + \ + MBEDTLS_MAX_IV_LENGTH + \ + MBEDTLS_SSL_MAC_ADD + \ + MBEDTLS_SSL_PADDING_ADD \ + ) + +#define MBEDTLS_SSL_IN_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \ + ( MBEDTLS_SSL_IN_CONTENT_LEN ) ) + +#define MBEDTLS_SSL_OUT_PAYLOAD_LEN ( MBEDTLS_SSL_PAYLOAD_OVERHEAD + \ + ( MBEDTLS_SSL_OUT_CONTENT_LEN ) ) + +/* The maximum number of buffered handshake messages. */ +#define MBEDTLS_SSL_MAX_BUFFERED_HS 4 + +/* Maximum length we can advertise as our max content length for + RFC 6066 max_fragment_length extension negotiation purposes + (the lesser of both sizes, if they are unequal.) + */ +#define MBEDTLS_TLS_EXT_ADV_CONTENT_LEN ( \ + (MBEDTLS_SSL_IN_CONTENT_LEN > MBEDTLS_SSL_OUT_CONTENT_LEN) \ + ? ( MBEDTLS_SSL_OUT_CONTENT_LEN ) \ + : ( MBEDTLS_SSL_IN_CONTENT_LEN ) \ + ) + +/* + * Check that we obey the standard's message size bounds + */ + +#if MBEDTLS_SSL_MAX_CONTENT_LEN > 16384 +#error "Bad configuration - record content too large." +#endif + +#if MBEDTLS_SSL_IN_CONTENT_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN +#error "Bad configuration - incoming record content should not be larger than MBEDTLS_SSL_MAX_CONTENT_LEN." +#endif + +#if MBEDTLS_SSL_OUT_CONTENT_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN +#error "Bad configuration - outgoing record content should not be larger than MBEDTLS_SSL_MAX_CONTENT_LEN." +#endif + +#if MBEDTLS_SSL_IN_PAYLOAD_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN + 2048 +#error "Bad configuration - incoming protected record payload too large." +#endif + +#if MBEDTLS_SSL_OUT_PAYLOAD_LEN > MBEDTLS_SSL_MAX_CONTENT_LEN + 2048 +#error "Bad configuration - outgoing protected record payload too large." +#endif + +/* Calculate buffer sizes */ + +/* Note: Even though the TLS record header is only 5 bytes + long, we're internally using 8 bytes to store the + implicit sequence number. */ +#define MBEDTLS_SSL_HEADER_LEN 13 + +#define MBEDTLS_SSL_IN_BUFFER_LEN \ + ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_IN_PAYLOAD_LEN ) ) + +#define MBEDTLS_SSL_OUT_BUFFER_LEN \ + ( ( MBEDTLS_SSL_HEADER_LEN ) + ( MBEDTLS_SSL_OUT_PAYLOAD_LEN ) ) + +#ifdef MBEDTLS_ZLIB_SUPPORT +/* Compression buffer holds both IN and OUT buffers, so should be size of the larger */ +#define MBEDTLS_SSL_COMPRESS_BUFFER_LEN ( \ + ( MBEDTLS_SSL_IN_BUFFER_LEN > MBEDTLS_SSL_OUT_BUFFER_LEN ) \ + ? MBEDTLS_SSL_IN_BUFFER_LEN \ + : MBEDTLS_SSL_OUT_BUFFER_LEN \ + ) +#endif + +/* + * TLS extension flags (for extensions with outgoing ServerHello content + * that need it (e.g. for RENEGOTIATION_INFO the server already knows because + * of state of the renegotiation flag, so no indicator is required) + */ +#define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT (1 << 0) +#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK (1 << 1) + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ + defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) +/* + * Abstraction for a grid of allowed signature-hash-algorithm pairs. + */ +struct mbedtls_ssl_sig_hash_set_t +{ + /* At the moment, we only need to remember a single suitable + * hash algorithm per signature algorithm. As long as that's + * the case - and we don't need a general lookup function - + * we can implement the sig-hash-set as a map from signatures + * to hash algorithms. */ + mbedtls_md_type_t rsa; + mbedtls_md_type_t ecdsa; +}; +#endif /* MBEDTLS_SSL_PROTO_TLS1_2 && + MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */ + +/* + * This structure contains the parameters only needed during handshake. + */ +struct mbedtls_ssl_handshake_params +{ + /* + * Handshake specific crypto variables + */ + +#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ + defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) + mbedtls_ssl_sig_hash_set_t hash_algs; /*!< Set of suitable sig-hash pairs */ +#endif +#if defined(MBEDTLS_DHM_C) + mbedtls_dhm_context dhm_ctx; /*!< DHM key exchange */ +#endif +#if defined(MBEDTLS_ECDH_C) + mbedtls_ecdh_context ecdh_ctx; /*!< ECDH key exchange */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) + mbedtls_ecjpake_context ecjpake_ctx; /*!< EC J-PAKE key exchange */ +#if defined(MBEDTLS_SSL_CLI_C) + unsigned char *ecjpake_cache; /*!< Cache for ClientHello ext */ + size_t ecjpake_cache_len; /*!< Length of cached data */ +#endif +#endif /* MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */ +#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \ + defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED) + const mbedtls_ecp_curve_info **curves; /*!< Supported elliptic curves */ +#endif +#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) + unsigned char *psk; /*!< PSK from the callback */ + size_t psk_len; /*!< Length of PSK from callback */ +#endif +#if defined(MBEDTLS_X509_CRT_PARSE_C) + mbedtls_ssl_key_cert *key_cert; /*!< chosen key/cert pair (server) */ +#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION) + int sni_authmode; /*!< authmode from SNI callback */ + mbedtls_ssl_key_cert *sni_key_cert; /*!< key/cert list from SNI */ + mbedtls_x509_crt *sni_ca_chain; /*!< trusted CAs from SNI callback */ + mbedtls_x509_crl *sni_ca_crl; /*!< trusted CAs CRLs from SNI */ +#endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ +#if defined(MBEDTLS_SSL__ECP_RESTARTABLE) + int ecrs_enabled; /*!< Handshake supports EC restart? */ + mbedtls_x509_crt_restart_ctx ecrs_ctx; /*!< restart context */ + enum { /* this complements ssl->state with info on intra-state operations */ + ssl_ecrs_none = 0, /*!< nothing going on (yet) */ + ssl_ecrs_crt_verify, /*!< Certificate: crt_verify() */ + ssl_ecrs_ske_start_processing, /*!< ServerKeyExchange: pk_verify() */ + ssl_ecrs_cke_ecdh_calc_secret, /*!< ClientKeyExchange: ECDH step 2 */ + ssl_ecrs_crt_vrfy_sign, /*!< CertificateVerify: pk_sign() */ + } ecrs_state; /*!< current (or last) operation */ + size_t ecrs_n; /*!< place for saving a length */ +#endif +#if defined(MBEDTLS_SSL_PROTO_DTLS) + unsigned int out_msg_seq; /*!< Outgoing handshake sequence number */ + unsigned int in_msg_seq; /*!< Incoming handshake sequence number */ + + unsigned char *verify_cookie; /*!< Cli: HelloVerifyRequest cookie + Srv: unused */ + unsigned char verify_cookie_len; /*!< Cli: cookie length + Srv: flag for sending a cookie */ + + uint32_t retransmit_timeout; /*!< Current value of timeout */ + unsigned char retransmit_state; /*!< Retransmission state */ + mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */ + mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */ + unsigned char *cur_msg_p; /*!< Position in current message */ + unsigned int in_flight_start_seq; /*!< Minimum message sequence in the + flight being received */ + mbedtls_ssl_transform *alt_transform_out; /*!< Alternative transform for + resending messages */ + unsigned char alt_out_ctr[8]; /*!< Alternative record epoch/counter + for resending messages */ + + struct + { + size_t total_bytes_buffered; /*!< Cumulative size of heap allocated + * buffers used for message buffering. */ + + uint8_t seen_ccs; /*!< Indicates if a CCS message has + * been seen in the current flight. */ + + struct mbedtls_ssl_hs_buffer + { + unsigned is_valid : 1; + unsigned is_fragmented : 1; + unsigned is_complete : 1; + unsigned char *data; + size_t data_len; + } hs[MBEDTLS_SSL_MAX_BUFFERED_HS]; + + struct + { + unsigned char *data; + size_t len; + unsigned epoch; + } future_record; + + } buffering; + + uint16_t mtu; /*!< Handshake mtu, used to fragment outgoing messages */ +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + + /* + * Checksum contexts + */ +#if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1) || \ + defined(MBEDTLS_SSL_PROTO_TLS1_1) + mbedtls_md5_context fin_md5; + mbedtls_sha1_context fin_sha1; +#endif +#if defined(MBEDTLS_SSL_PROTO_TLS1_2) +#if defined(MBEDTLS_SHA256_C) + mbedtls_sha256_context fin_sha256; +#endif +#if defined(MBEDTLS_SHA512_C) + mbedtls_sha512_context fin_sha512; +#endif +#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */ + + void (*update_checksum)(mbedtls_ssl_context *, const unsigned char *, size_t); + void (*calc_verify)(mbedtls_ssl_context *, unsigned char *); + void (*calc_finished)(mbedtls_ssl_context *, unsigned char *, int); + int (*tls_prf)(const unsigned char *, size_t, const char *, + const unsigned char *, size_t, + unsigned char *, size_t); + + size_t pmslen; /*!< premaster length */ + + unsigned char randbytes[64]; /*!< random bytes */ + unsigned char premaster[MBEDTLS_PREMASTER_SIZE]; + /*!< premaster secret */ + + int resume; /*!< session resume indicator*/ + int max_major_ver; /*!< max. major version client*/ + int max_minor_ver; /*!< max. minor version client*/ + int cli_exts; /*!< client extension presence*/ + +#if defined(MBEDTLS_SSL_SESSION_TICKETS) + int new_session_ticket; /*!< use NewSessionTicket? */ +#endif /* MBEDTLS_SSL_SESSION_TICKETS */ +#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET) + int extended_ms; /*!< use Extended Master Secret? */ +#endif + +#if defined(MBEDTLS_SSL_ASYNC_PRIVATE) + unsigned int async_in_progress : 1; /*!< an asynchronous operation is in progress */ +#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ + +#if defined(MBEDTLS_SSL_ASYNC_PRIVATE) + /** Asynchronous operation context. This field is meant for use by the + * asynchronous operation callbacks (mbedtls_ssl_config::f_async_sign_start, + * mbedtls_ssl_config::f_async_decrypt_start, + * mbedtls_ssl_config::f_async_resume, mbedtls_ssl_config::f_async_cancel). + * The library does not use it internally. */ + void *user_async_ctx; +#endif /* MBEDTLS_SSL_ASYNC_PRIVATE */ +}; + +typedef struct mbedtls_ssl_hs_buffer mbedtls_ssl_hs_buffer; + +/* + * This structure contains a full set of runtime transform parameters + * either in negotiation or active. + */ +struct mbedtls_ssl_transform +{ + /* + * Session specific crypto layer + */ + const mbedtls_ssl_ciphersuite_t *ciphersuite_info; + /*!< Chosen cipersuite_info */ + unsigned int keylen; /*!< symmetric key length (bytes) */ + size_t minlen; /*!< min. ciphertext length */ + size_t ivlen; /*!< IV length */ + size_t fixed_ivlen; /*!< Fixed part of IV (AEAD) */ + size_t maclen; /*!< MAC length */ + + unsigned char iv_enc[16]; /*!< IV (encryption) */ + unsigned char iv_dec[16]; /*!< IV (decryption) */ + +#if defined(MBEDTLS_SSL_PROTO_SSL3) + /* Needed only for SSL v3.0 secret */ + unsigned char mac_enc[20]; /*!< SSL v3.0 secret (enc) */ + unsigned char mac_dec[20]; /*!< SSL v3.0 secret (dec) */ +#endif /* MBEDTLS_SSL_PROTO_SSL3 */ + + mbedtls_md_context_t md_ctx_enc; /*!< MAC (encryption) */ + mbedtls_md_context_t md_ctx_dec; /*!< MAC (decryption) */ + + mbedtls_cipher_context_t cipher_ctx_enc; /*!< encryption context */ + mbedtls_cipher_context_t cipher_ctx_dec; /*!< decryption context */ + + /* + * Session specific compression layer + */ +#if defined(MBEDTLS_ZLIB_SUPPORT) + z_stream ctx_deflate; /*!< compression context */ + z_stream ctx_inflate; /*!< decompression context */ +#endif +}; + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/* + * List of certificate + private key pairs + */ +struct mbedtls_ssl_key_cert +{ + mbedtls_x509_crt *cert; /*!< cert */ + mbedtls_pk_context *key; /*!< private key */ + mbedtls_ssl_key_cert *next; /*!< next key/cert pair */ +}; +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +#if defined(MBEDTLS_SSL_PROTO_DTLS) +/* + * List of handshake messages kept around for resending + */ +struct mbedtls_ssl_flight_item +{ + unsigned char *p; /*!< message, including handshake headers */ + size_t len; /*!< length of p */ + unsigned char type; /*!< type of the message: handshake or CCS */ + mbedtls_ssl_flight_item *next; /*!< next handshake message(s) */ +}; +#endif /* MBEDTLS_SSL_PROTO_DTLS */ + +#if defined(MBEDTLS_SSL_PROTO_TLS1_2) && \ + defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) + +/* Find an entry in a signature-hash set matching a given hash algorithm. */ +mbedtls_md_type_t mbedtls_ssl_sig_hash_set_find( mbedtls_ssl_sig_hash_set_t *set, + mbedtls_pk_type_t sig_alg ); +/* Add a signature-hash-pair to a signature-hash set */ +void mbedtls_ssl_sig_hash_set_add( mbedtls_ssl_sig_hash_set_t *set, + mbedtls_pk_type_t sig_alg, + mbedtls_md_type_t md_alg ); +/* Allow exactly one hash algorithm for each signature. */ +void mbedtls_ssl_sig_hash_set_const_hash( mbedtls_ssl_sig_hash_set_t *set, + mbedtls_md_type_t md_alg ); + +/* Setup an empty signature-hash set */ +static inline void mbedtls_ssl_sig_hash_set_init( mbedtls_ssl_sig_hash_set_t *set ) +{ + mbedtls_ssl_sig_hash_set_const_hash( set, MBEDTLS_MD_NONE ); +} + +#endif /* MBEDTLS_SSL_PROTO_TLS1_2) && + MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */ + +/** + * \brief Free referenced items in an SSL transform context and clear + * memory + * + * \param transform SSL transform context + */ +void mbedtls_ssl_transform_free( mbedtls_ssl_transform *transform ); + +/** + * \brief Free referenced items in an SSL handshake context and clear + * memory + * + * \param ssl SSL context + */ +void mbedtls_ssl_handshake_free( mbedtls_ssl_context *ssl ); + +int mbedtls_ssl_handshake_client_step( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_handshake_server_step( mbedtls_ssl_context *ssl ); +void mbedtls_ssl_handshake_wrapup( mbedtls_ssl_context *ssl ); + +int mbedtls_ssl_send_fatal_handshake_failure( mbedtls_ssl_context *ssl ); + +void mbedtls_ssl_reset_checksum( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_derive_keys( mbedtls_ssl_context *ssl ); + +int mbedtls_ssl_handle_message_type( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_prepare_handshake_record( mbedtls_ssl_context *ssl ); +void mbedtls_ssl_update_handshake_status( mbedtls_ssl_context *ssl ); + +/** + * \brief Update record layer + * + * This function roughly separates the implementation + * of the logic of (D)TLS from the implementation + * of the secure transport. + * + * \param ssl The SSL context to use. + * \param update_hs_digest This indicates if the handshake digest + * should be automatically updated in case + * a handshake message is found. + * + * \return 0 or non-zero error code. + * + * \note A clarification on what is called 'record layer' here + * is in order, as many sensible definitions are possible: + * + * The record layer takes as input an untrusted underlying + * transport (stream or datagram) and transforms it into + * a serially multiplexed, secure transport, which + * conceptually provides the following: + * + * (1) Three datagram based, content-agnostic transports + * for handshake, alert and CCS messages. + * (2) One stream- or datagram-based transport + * for application data. + * (3) Functionality for changing the underlying transform + * securing the contents. + * + * The interface to this functionality is given as follows: + * + * a Updating + * [Currently implemented by mbedtls_ssl_read_record] + * + * Check if and on which of the four 'ports' data is pending: + * Nothing, a controlling datagram of type (1), or application + * data (2). In any case data is present, internal buffers + * provide access to the data for the user to process it. + * Consumption of type (1) datagrams is done automatically + * on the next update, invalidating that the internal buffers + * for previous datagrams, while consumption of application + * data (2) is user-controlled. + * + * b Reading of application data + * [Currently manual adaption of ssl->in_offt pointer] + * + * As mentioned in the last paragraph, consumption of data + * is different from the automatic consumption of control + * datagrams (1) because application data is treated as a stream. + * + * c Tracking availability of application data + * [Currently manually through decreasing ssl->in_msglen] + * + * For efficiency and to retain datagram semantics for + * application data in case of DTLS, the record layer + * provides functionality for checking how much application + * data is still available in the internal buffer. + * + * d Changing the transformation securing the communication. + * + * Given an opaque implementation of the record layer in the + * above sense, it should be possible to implement the logic + * of (D)TLS on top of it without the need to know anything + * about the record layer's internals. This is done e.g. + * in all the handshake handling functions, and in the + * application data reading function mbedtls_ssl_read. + * + * \note The above tries to give a conceptual picture of the + * record layer, but the current implementation deviates + * from it in some places. For example, our implementation of + * the update functionality through mbedtls_ssl_read_record + * discards datagrams depending on the current state, which + * wouldn't fall under the record layer's responsibility + * following the above definition. + * + */ +int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl, + unsigned update_hs_digest ); +int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want ); + +int mbedtls_ssl_write_handshake_msg( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl, uint8_t force_flush ); +int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl ); + +int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_write_certificate( mbedtls_ssl_context *ssl ); + +int mbedtls_ssl_parse_change_cipher_spec( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_write_change_cipher_spec( mbedtls_ssl_context *ssl ); + +int mbedtls_ssl_parse_finished( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_write_finished( mbedtls_ssl_context *ssl ); + +void mbedtls_ssl_optimize_checksum( mbedtls_ssl_context *ssl, + const mbedtls_ssl_ciphersuite_t *ciphersuite_info ); + +#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED) +int mbedtls_ssl_psk_derive_premaster( mbedtls_ssl_context *ssl, mbedtls_key_exchange_type_t key_ex ); +#endif + +#if defined(MBEDTLS_PK_C) +unsigned char mbedtls_ssl_sig_from_pk( mbedtls_pk_context *pk ); +unsigned char mbedtls_ssl_sig_from_pk_alg( mbedtls_pk_type_t type ); +mbedtls_pk_type_t mbedtls_ssl_pk_alg_from_sig( unsigned char sig ); +#endif + +mbedtls_md_type_t mbedtls_ssl_md_alg_from_hash( unsigned char hash ); +unsigned char mbedtls_ssl_hash_from_md_alg( int md ); +int mbedtls_ssl_set_calc_verify_md( mbedtls_ssl_context *ssl, int md ); + +#if defined(MBEDTLS_ECP_C) +int mbedtls_ssl_check_curve( const mbedtls_ssl_context *ssl, mbedtls_ecp_group_id grp_id ); +#endif + +#if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED) +int mbedtls_ssl_check_sig_hash( const mbedtls_ssl_context *ssl, + mbedtls_md_type_t md ); +#endif + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +static inline mbedtls_pk_context *mbedtls_ssl_own_key( mbedtls_ssl_context *ssl ) +{ + mbedtls_ssl_key_cert *key_cert; + + if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL ) + key_cert = ssl->handshake->key_cert; + else + key_cert = ssl->conf->key_cert; + + return( key_cert == NULL ? NULL : key_cert->key ); +} + +static inline mbedtls_x509_crt *mbedtls_ssl_own_cert( mbedtls_ssl_context *ssl ) +{ + mbedtls_ssl_key_cert *key_cert; + + if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL ) + key_cert = ssl->handshake->key_cert; + else + key_cert = ssl->conf->key_cert; + + return( key_cert == NULL ? NULL : key_cert->cert ); +} + +/* + * Check usage of a certificate wrt extensions: + * keyUsage, extendedKeyUsage (later), and nSCertType (later). + * + * Warning: cert_endpoint is the endpoint of the cert (ie, of our peer when we + * check a cert we received from them)! + * + * Return 0 if everything is OK, -1 if not. + */ +int mbedtls_ssl_check_cert_usage( const mbedtls_x509_crt *cert, + const mbedtls_ssl_ciphersuite_t *ciphersuite, + int cert_endpoint, + uint32_t *flags ); +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +void mbedtls_ssl_write_version( int major, int minor, int transport, + unsigned char ver[2] ); +void mbedtls_ssl_read_version( int *major, int *minor, int transport, + const unsigned char ver[2] ); + +static inline size_t mbedtls_ssl_hdr_len( const mbedtls_ssl_context *ssl ) +{ +#if defined(MBEDTLS_SSL_PROTO_DTLS) + if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) + return( 13 ); +#else + ((void) ssl); +#endif + return( 5 ); +} + +static inline size_t mbedtls_ssl_hs_hdr_len( const mbedtls_ssl_context *ssl ) +{ +#if defined(MBEDTLS_SSL_PROTO_DTLS) + if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM ) + return( 12 ); +#else + ((void) ssl); +#endif + return( 4 ); +} + +#if defined(MBEDTLS_SSL_PROTO_DTLS) +void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl ); +void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_resend( mbedtls_ssl_context *ssl ); +int mbedtls_ssl_flight_transmit( mbedtls_ssl_context *ssl ); +#endif + +/* Visible for testing purposes only */ +#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY) +int mbedtls_ssl_dtls_replay_check( mbedtls_ssl_context *ssl ); +void mbedtls_ssl_dtls_replay_update( mbedtls_ssl_context *ssl ); +#endif + +/* constant-time buffer comparison */ +static inline int mbedtls_ssl_safer_memcmp( const void *a, const void *b, size_t n ) +{ + size_t i; + volatile const unsigned char *A = (volatile const unsigned char *) a; + volatile const unsigned char *B = (volatile const unsigned char *) b; + volatile unsigned char diff = 0; + + for( i = 0; i < n; i++ ) + { + /* Read volatile data in order before computing diff. + * This avoids IAR compiler warning: + * 'the order of volatile accesses is undefined ..' */ + unsigned char x = A[i], y = B[i]; + diff |= x ^ y; + } + + return( diff ); +} + +#if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1) || \ + defined(MBEDTLS_SSL_PROTO_TLS1_1) +int mbedtls_ssl_get_key_exchange_md_ssl_tls( mbedtls_ssl_context *ssl, + unsigned char *output, + unsigned char *data, size_t data_len ); +#endif /* MBEDTLS_SSL_PROTO_SSL3 || MBEDTLS_SSL_PROTO_TLS1 || \ + MBEDTLS_SSL_PROTO_TLS1_1 */ + +#if defined(MBEDTLS_SSL_PROTO_TLS1) || defined(MBEDTLS_SSL_PROTO_TLS1_1) || \ + defined(MBEDTLS_SSL_PROTO_TLS1_2) +int mbedtls_ssl_get_key_exchange_md_tls1_2( mbedtls_ssl_context *ssl, + unsigned char *hash, size_t *hashlen, + unsigned char *data, size_t data_len, + mbedtls_md_type_t md_alg ); +#endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 || \ + MBEDTLS_SSL_PROTO_TLS1_2 */ + +#ifdef __cplusplus +} +#endif + +#endif /* ssl_internal.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_ticket.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_ticket.h new file mode 100644 index 000000000..a84e7816e --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/ssl_ticket.h @@ -0,0 +1,142 @@ +/** + * \file ssl_ticket.h + * + * \brief TLS server ticket callbacks implementation + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_SSL_TICKET_H +#define MBEDTLS_SSL_TICKET_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +/* + * This implementation of the session ticket callbacks includes key + * management, rotating the keys periodically in order to preserve forward + * secrecy, when MBEDTLS_HAVE_TIME is defined. + */ + +#include "ssl.h" +#include "cipher.h" + +#if defined(MBEDTLS_THREADING_C) +#include "threading.h" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Information for session ticket protection + */ +typedef struct mbedtls_ssl_ticket_key +{ + unsigned char name[4]; /*!< random key identifier */ + uint32_t generation_time; /*!< key generation timestamp (seconds) */ + mbedtls_cipher_context_t ctx; /*!< context for auth enc/decryption */ +} +mbedtls_ssl_ticket_key; + +/** + * \brief Context for session ticket handling functions + */ +typedef struct mbedtls_ssl_ticket_context +{ + mbedtls_ssl_ticket_key keys[2]; /*!< ticket protection keys */ + unsigned char active; /*!< index of the currently active key */ + + uint32_t ticket_lifetime; /*!< lifetime of tickets in seconds */ + + /** Callback for getting (pseudo-)random numbers */ + int (*f_rng)(void *, unsigned char *, size_t); + void *p_rng; /*!< context for the RNG function */ + +#if defined(MBEDTLS_THREADING_C) + mbedtls_threading_mutex_t mutex; +#endif +} +mbedtls_ssl_ticket_context; + +/** + * \brief Initialize a ticket context. + * (Just make it ready for mbedtls_ssl_ticket_setup() + * or mbedtls_ssl_ticket_free().) + * + * \param ctx Context to be initialized + */ +void mbedtls_ssl_ticket_init( mbedtls_ssl_ticket_context *ctx ); + +/** + * \brief Prepare context to be actually used + * + * \param ctx Context to be set up + * \param f_rng RNG callback function + * \param p_rng RNG callback context + * \param cipher AEAD cipher to use for ticket protection. + * Recommended value: MBEDTLS_CIPHER_AES_256_GCM. + * \param lifetime Tickets lifetime in seconds + * Recommended value: 86400 (one day). + * + * \note It is highly recommended to select a cipher that is at + * least as strong as the the strongest ciphersuite + * supported. Usually that means a 256-bit key. + * + * \note The lifetime of the keys is twice the lifetime of tickets. + * It is recommended to pick a reasonnable lifetime so as not + * to negate the benefits of forward secrecy. + * + * \return 0 if successful, + * or a specific MBEDTLS_ERR_XXX error code + */ +int mbedtls_ssl_ticket_setup( mbedtls_ssl_ticket_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, + mbedtls_cipher_type_t cipher, + uint32_t lifetime ); + +/** + * \brief Implementation of the ticket write callback + * + * \note See \c mbedlts_ssl_ticket_write_t for description + */ +mbedtls_ssl_ticket_write_t mbedtls_ssl_ticket_write; + +/** + * \brief Implementation of the ticket parse callback + * + * \note See \c mbedlts_ssl_ticket_parse_t for description + */ +mbedtls_ssl_ticket_parse_t mbedtls_ssl_ticket_parse; + +/** + * \brief Free a context's content and zeroize it. + * + * \param ctx Context to be cleaned up + */ +void mbedtls_ssl_ticket_free( mbedtls_ssl_ticket_context *ctx ); + +#ifdef __cplusplus +} +#endif + +#endif /* ssl_ticket.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/threading.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/threading.h new file mode 100644 index 000000000..92e6e6b98 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/threading.h @@ -0,0 +1,122 @@ +/** + * \file threading.h + * + * \brief Threading abstraction layer + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_THREADING_H +#define MBEDTLS_THREADING_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stdlib.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE is deprecated and should not be + * used. */ +#define MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE -0x001A /**< The selected feature is not available. */ + +#define MBEDTLS_ERR_THREADING_BAD_INPUT_DATA -0x001C /**< Bad input parameters to function. */ +#define MBEDTLS_ERR_THREADING_MUTEX_ERROR -0x001E /**< Locking / unlocking / free failed with error code. */ + +#if defined(MBEDTLS_THREADING_PTHREAD) +#include <pthread.h> +typedef struct mbedtls_threading_mutex_t +{ + pthread_mutex_t mutex; + char is_valid; +} mbedtls_threading_mutex_t; +#endif + +#if defined(MBEDTLS_THREADING_ALT) +/* You should define the mbedtls_threading_mutex_t type in your header */ +#include "threading_alt.h" + +/** + * \brief Set your alternate threading implementation function + * pointers and initialize global mutexes. If used, this + * function must be called once in the main thread before any + * other mbed TLS function is called, and + * mbedtls_threading_free_alt() must be called once in the main + * thread after all other mbed TLS functions. + * + * \note mutex_init() and mutex_free() don't return a status code. + * If mutex_init() fails, it should leave its argument (the + * mutex) in a state such that mutex_lock() will fail when + * called with this argument. + * + * \param mutex_init the init function implementation + * \param mutex_free the free function implementation + * \param mutex_lock the lock function implementation + * \param mutex_unlock the unlock function implementation + */ +void mbedtls_threading_set_alt( void (*mutex_init)( mbedtls_threading_mutex_t * ), + void (*mutex_free)( mbedtls_threading_mutex_t * ), + int (*mutex_lock)( mbedtls_threading_mutex_t * ), + int (*mutex_unlock)( mbedtls_threading_mutex_t * ) ); + +/** + * \brief Free global mutexes. + */ +void mbedtls_threading_free_alt( void ); +#endif /* MBEDTLS_THREADING_ALT */ + +#if defined(MBEDTLS_THREADING_C) +/* + * The function pointers for mutex_init, mutex_free, mutex_ and mutex_unlock + * + * All these functions are expected to work or the result will be undefined. + */ +extern void (*mbedtls_mutex_init)( mbedtls_threading_mutex_t *mutex ); +extern void (*mbedtls_mutex_free)( mbedtls_threading_mutex_t *mutex ); +extern int (*mbedtls_mutex_lock)( mbedtls_threading_mutex_t *mutex ); +extern int (*mbedtls_mutex_unlock)( mbedtls_threading_mutex_t *mutex ); + +/* + * Global mutexes + */ +#if defined(MBEDTLS_FS_IO) +extern mbedtls_threading_mutex_t mbedtls_threading_readdir_mutex; +#endif + +#if defined(MBEDTLS_HAVE_TIME_DATE) && !defined(MBEDTLS_PLATFORM_GMTIME_R_ALT) +/* This mutex may or may not be used in the default definition of + * mbedtls_platform_gmtime_r(), but in order to determine that, + * we need to check POSIX features, hence modify _POSIX_C_SOURCE. + * With the current approach, this declaration is orphaned, lacking + * an accompanying definition, in case mbedtls_platform_gmtime_r() + * doesn't need it, but that's not a problem. */ +extern mbedtls_threading_mutex_t mbedtls_threading_gmtime_mutex; +#endif /* MBEDTLS_HAVE_TIME_DATE && !MBEDTLS_PLATFORM_GMTIME_R_ALT */ + +#endif /* MBEDTLS_THREADING_C */ + +#ifdef __cplusplus +} +#endif + +#endif /* threading.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/timing.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/timing.h new file mode 100644 index 000000000..a965fe0d3 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/timing.h @@ -0,0 +1,153 @@ +/** + * \file timing.h + * + * \brief Portable interface to timeouts and to the CPU cycle counter + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_TIMING_H +#define MBEDTLS_TIMING_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stdint.h> + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_TIMING_ALT) +// Regular implementation +// + +/** + * \brief timer structure + */ +struct mbedtls_timing_hr_time +{ + unsigned char opaque[32]; +}; + +/** + * \brief Context for mbedtls_timing_set/get_delay() + */ +typedef struct mbedtls_timing_delay_context +{ + struct mbedtls_timing_hr_time timer; + uint32_t int_ms; + uint32_t fin_ms; +} mbedtls_timing_delay_context; + +#else /* MBEDTLS_TIMING_ALT */ +#include "timing_alt.h" +#endif /* MBEDTLS_TIMING_ALT */ + +extern volatile int mbedtls_timing_alarmed; + +/** + * \brief Return the CPU cycle counter value + * + * \warning This is only a best effort! Do not rely on this! + * In particular, it is known to be unreliable on virtual + * machines. + * + * \note This value starts at an unspecified origin and + * may wrap around. + */ +unsigned long mbedtls_timing_hardclock( void ); + +/** + * \brief Return the elapsed time in milliseconds + * + * \param val points to a timer structure + * \param reset If 0, query the elapsed time. Otherwise (re)start the timer. + * + * \return Elapsed time since the previous reset in ms. When + * restarting, this is always 0. + * + * \note To initialize a timer, call this function with reset=1. + * + * Determining the elapsed time and resetting the timer is not + * atomic on all platforms, so after the sequence + * `{ get_timer(1); ...; time1 = get_timer(1); ...; time2 = + * get_timer(0) }` the value time1+time2 is only approximately + * the delay since the first reset. + */ +unsigned long mbedtls_timing_get_timer( struct mbedtls_timing_hr_time *val, int reset ); + +/** + * \brief Setup an alarm clock + * + * \param seconds delay before the "mbedtls_timing_alarmed" flag is set + * (must be >=0) + * + * \warning Only one alarm at a time is supported. In a threaded + * context, this means one for the whole process, not one per + * thread. + */ +void mbedtls_set_alarm( int seconds ); + +/** + * \brief Set a pair of delays to watch + * (See \c mbedtls_timing_get_delay().) + * + * \param data Pointer to timing data. + * Must point to a valid \c mbedtls_timing_delay_context struct. + * \param int_ms First (intermediate) delay in milliseconds. + * The effect if int_ms > fin_ms is unspecified. + * \param fin_ms Second (final) delay in milliseconds. + * Pass 0 to cancel the current delay. + * + * \note To set a single delay, either use \c mbedtls_timing_set_timer + * directly or use this function with int_ms == fin_ms. + */ +void mbedtls_timing_set_delay( void *data, uint32_t int_ms, uint32_t fin_ms ); + +/** + * \brief Get the status of delays + * (Memory helper: number of delays passed.) + * + * \param data Pointer to timing data + * Must point to a valid \c mbedtls_timing_delay_context struct. + * + * \return -1 if cancelled (fin_ms = 0), + * 0 if none of the delays are passed, + * 1 if only the intermediate delay is passed, + * 2 if the final delay is passed. + */ +int mbedtls_timing_get_delay( void *data ); + +#if defined(MBEDTLS_SELF_TEST) +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if a test failed + */ +int mbedtls_timing_self_test( int verbose ); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* timing.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/version.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/version.h new file mode 100644 index 000000000..ef8e4c1f4 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/version.h @@ -0,0 +1,112 @@ +/** + * \file version.h + * + * \brief Run-time version information + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +/* + * This set of compile-time defines and run-time variables can be used to + * determine the version number of the mbed TLS library used. + */ +#ifndef MBEDTLS_VERSION_H +#define MBEDTLS_VERSION_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +/** + * The version number x.y.z is split into three parts. + * Major, Minor, Patchlevel + */ +#define MBEDTLS_VERSION_MAJOR 2 +#define MBEDTLS_VERSION_MINOR 16 +#define MBEDTLS_VERSION_PATCH 2 + +/** + * The single version number has the following structure: + * MMNNPP00 + * Major version | Minor version | Patch version + */ +#define MBEDTLS_VERSION_NUMBER 0x02100200 +#define MBEDTLS_VERSION_STRING "2.16.2" +#define MBEDTLS_VERSION_STRING_FULL "mbed TLS 2.16.2" + +#if defined(MBEDTLS_VERSION_C) + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Get the version number. + * + * \return The constructed version number in the format + * MMNNPP00 (Major, Minor, Patch). + */ +unsigned int mbedtls_version_get_number( void ); + +/** + * Get the version string ("x.y.z"). + * + * \param string The string that will receive the value. + * (Should be at least 9 bytes in size) + */ +void mbedtls_version_get_string( char *string ); + +/** + * Get the full version string ("mbed TLS x.y.z"). + * + * \param string The string that will receive the value. The mbed TLS version + * string will use 18 bytes AT MOST including a terminating + * null byte. + * (So the buffer should be at least 18 bytes to receive this + * version string). + */ +void mbedtls_version_get_string_full( char *string ); + +/** + * \brief Check if support for a feature was compiled into this + * mbed TLS binary. This allows you to see at runtime if the + * library was for instance compiled with or without + * Multi-threading support. + * + * \note only checks against defines in the sections "System + * support", "mbed TLS modules" and "mbed TLS feature + * support" in config.h + * + * \param feature The string for the define to check (e.g. "MBEDTLS_AES_C") + * + * \return 0 if the feature is present, + * -1 if the feature is not present and + * -2 if support for feature checking as a whole was not + * compiled in. + */ +int mbedtls_version_check_feature( const char *feature ); + +#ifdef __cplusplus +} +#endif + +#endif /* MBEDTLS_VERSION_C */ + +#endif /* version.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509.h new file mode 100644 index 000000000..9ae825c18 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509.h @@ -0,0 +1,337 @@ +/** + * \file x509.h + * + * \brief X.509 generic defines and structures + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_X509_H +#define MBEDTLS_X509_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "asn1.h" +#include "pk.h" + +#if defined(MBEDTLS_RSA_C) +#include "rsa.h" +#endif + +/** + * \addtogroup x509_module + * \{ + */ + +#if !defined(MBEDTLS_X509_MAX_INTERMEDIATE_CA) +/** + * Maximum number of intermediate CAs in a verification chain. + * That is, maximum length of the chain, excluding the end-entity certificate + * and the trusted root certificate. + * + * Set this to a low value to prevent an adversary from making you waste + * resources verifying an overlong certificate chain. + */ +#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 +#endif + +/** + * \name X509 Error codes + * \{ + */ +#define MBEDTLS_ERR_X509_FEATURE_UNAVAILABLE -0x2080 /**< Unavailable feature, e.g. RSA hashing/encryption combination. */ +#define MBEDTLS_ERR_X509_UNKNOWN_OID -0x2100 /**< Requested OID is unknown. */ +#define MBEDTLS_ERR_X509_INVALID_FORMAT -0x2180 /**< The CRT/CRL/CSR format is invalid, e.g. different type expected. */ +#define MBEDTLS_ERR_X509_INVALID_VERSION -0x2200 /**< The CRT/CRL/CSR version element is invalid. */ +#define MBEDTLS_ERR_X509_INVALID_SERIAL -0x2280 /**< The serial tag or value is invalid. */ +#define MBEDTLS_ERR_X509_INVALID_ALG -0x2300 /**< The algorithm tag or value is invalid. */ +#define MBEDTLS_ERR_X509_INVALID_NAME -0x2380 /**< The name tag or value is invalid. */ +#define MBEDTLS_ERR_X509_INVALID_DATE -0x2400 /**< The date tag or value is invalid. */ +#define MBEDTLS_ERR_X509_INVALID_SIGNATURE -0x2480 /**< The signature tag or value invalid. */ +#define MBEDTLS_ERR_X509_INVALID_EXTENSIONS -0x2500 /**< The extension tag or value is invalid. */ +#define MBEDTLS_ERR_X509_UNKNOWN_VERSION -0x2580 /**< CRT/CRL/CSR has an unsupported version number. */ +#define MBEDTLS_ERR_X509_UNKNOWN_SIG_ALG -0x2600 /**< Signature algorithm (oid) is unsupported. */ +#define MBEDTLS_ERR_X509_SIG_MISMATCH -0x2680 /**< Signature algorithms do not match. (see \c ::mbedtls_x509_crt sig_oid) */ +#define MBEDTLS_ERR_X509_CERT_VERIFY_FAILED -0x2700 /**< Certificate verification failed, e.g. CRL, CA or signature check failed. */ +#define MBEDTLS_ERR_X509_CERT_UNKNOWN_FORMAT -0x2780 /**< Format not recognized as DER or PEM. */ +#define MBEDTLS_ERR_X509_BAD_INPUT_DATA -0x2800 /**< Input invalid. */ +#define MBEDTLS_ERR_X509_ALLOC_FAILED -0x2880 /**< Allocation of memory failed. */ +#define MBEDTLS_ERR_X509_FILE_IO_ERROR -0x2900 /**< Read/write of file failed. */ +#define MBEDTLS_ERR_X509_BUFFER_TOO_SMALL -0x2980 /**< Destination buffer is too small. */ +#define MBEDTLS_ERR_X509_FATAL_ERROR -0x3000 /**< A fatal error occured, eg the chain is too long or the vrfy callback failed. */ +/* \} name */ + +/** + * \name X509 Verify codes + * \{ + */ +/* Reminder: update x509_crt_verify_strings[] in library/x509_crt.c */ +#define MBEDTLS_X509_BADCERT_EXPIRED 0x01 /**< The certificate validity has expired. */ +#define MBEDTLS_X509_BADCERT_REVOKED 0x02 /**< The certificate has been revoked (is on a CRL). */ +#define MBEDTLS_X509_BADCERT_CN_MISMATCH 0x04 /**< The certificate Common Name (CN) does not match with the expected CN. */ +#define MBEDTLS_X509_BADCERT_NOT_TRUSTED 0x08 /**< The certificate is not correctly signed by the trusted CA. */ +#define MBEDTLS_X509_BADCRL_NOT_TRUSTED 0x10 /**< The CRL is not correctly signed by the trusted CA. */ +#define MBEDTLS_X509_BADCRL_EXPIRED 0x20 /**< The CRL is expired. */ +#define MBEDTLS_X509_BADCERT_MISSING 0x40 /**< Certificate was missing. */ +#define MBEDTLS_X509_BADCERT_SKIP_VERIFY 0x80 /**< Certificate verification was skipped. */ +#define MBEDTLS_X509_BADCERT_OTHER 0x0100 /**< Other reason (can be used by verify callback) */ +#define MBEDTLS_X509_BADCERT_FUTURE 0x0200 /**< The certificate validity starts in the future. */ +#define MBEDTLS_X509_BADCRL_FUTURE 0x0400 /**< The CRL is from the future */ +#define MBEDTLS_X509_BADCERT_KEY_USAGE 0x0800 /**< Usage does not match the keyUsage extension. */ +#define MBEDTLS_X509_BADCERT_EXT_KEY_USAGE 0x1000 /**< Usage does not match the extendedKeyUsage extension. */ +#define MBEDTLS_X509_BADCERT_NS_CERT_TYPE 0x2000 /**< Usage does not match the nsCertType extension. */ +#define MBEDTLS_X509_BADCERT_BAD_MD 0x4000 /**< The certificate is signed with an unacceptable hash. */ +#define MBEDTLS_X509_BADCERT_BAD_PK 0x8000 /**< The certificate is signed with an unacceptable PK alg (eg RSA vs ECDSA). */ +#define MBEDTLS_X509_BADCERT_BAD_KEY 0x010000 /**< The certificate is signed with an unacceptable key (eg bad curve, RSA too short). */ +#define MBEDTLS_X509_BADCRL_BAD_MD 0x020000 /**< The CRL is signed with an unacceptable hash. */ +#define MBEDTLS_X509_BADCRL_BAD_PK 0x040000 /**< The CRL is signed with an unacceptable PK alg (eg RSA vs ECDSA). */ +#define MBEDTLS_X509_BADCRL_BAD_KEY 0x080000 /**< The CRL is signed with an unacceptable key (eg bad curve, RSA too short). */ + +/* \} name */ +/* \} addtogroup x509_module */ + +/* + * X.509 v3 Key Usage Extension flags + * Reminder: update x509_info_key_usage() when adding new flags. + */ +#define MBEDTLS_X509_KU_DIGITAL_SIGNATURE (0x80) /* bit 0 */ +#define MBEDTLS_X509_KU_NON_REPUDIATION (0x40) /* bit 1 */ +#define MBEDTLS_X509_KU_KEY_ENCIPHERMENT (0x20) /* bit 2 */ +#define MBEDTLS_X509_KU_DATA_ENCIPHERMENT (0x10) /* bit 3 */ +#define MBEDTLS_X509_KU_KEY_AGREEMENT (0x08) /* bit 4 */ +#define MBEDTLS_X509_KU_KEY_CERT_SIGN (0x04) /* bit 5 */ +#define MBEDTLS_X509_KU_CRL_SIGN (0x02) /* bit 6 */ +#define MBEDTLS_X509_KU_ENCIPHER_ONLY (0x01) /* bit 7 */ +#define MBEDTLS_X509_KU_DECIPHER_ONLY (0x8000) /* bit 8 */ + +/* + * Netscape certificate types + * (http://www.mozilla.org/projects/security/pki/nss/tech-notes/tn3.html) + */ + +#define MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT (0x80) /* bit 0 */ +#define MBEDTLS_X509_NS_CERT_TYPE_SSL_SERVER (0x40) /* bit 1 */ +#define MBEDTLS_X509_NS_CERT_TYPE_EMAIL (0x20) /* bit 2 */ +#define MBEDTLS_X509_NS_CERT_TYPE_OBJECT_SIGNING (0x10) /* bit 3 */ +#define MBEDTLS_X509_NS_CERT_TYPE_RESERVED (0x08) /* bit 4 */ +#define MBEDTLS_X509_NS_CERT_TYPE_SSL_CA (0x04) /* bit 5 */ +#define MBEDTLS_X509_NS_CERT_TYPE_EMAIL_CA (0x02) /* bit 6 */ +#define MBEDTLS_X509_NS_CERT_TYPE_OBJECT_SIGNING_CA (0x01) /* bit 7 */ + +/* + * X.509 extension types + * + * Comments refer to the status for using certificates. Status can be + * different for writing certificates or reading CRLs or CSRs. + */ +#define MBEDTLS_X509_EXT_AUTHORITY_KEY_IDENTIFIER (1 << 0) +#define MBEDTLS_X509_EXT_SUBJECT_KEY_IDENTIFIER (1 << 1) +#define MBEDTLS_X509_EXT_KEY_USAGE (1 << 2) +#define MBEDTLS_X509_EXT_CERTIFICATE_POLICIES (1 << 3) +#define MBEDTLS_X509_EXT_POLICY_MAPPINGS (1 << 4) +#define MBEDTLS_X509_EXT_SUBJECT_ALT_NAME (1 << 5) /* Supported (DNS) */ +#define MBEDTLS_X509_EXT_ISSUER_ALT_NAME (1 << 6) +#define MBEDTLS_X509_EXT_SUBJECT_DIRECTORY_ATTRS (1 << 7) +#define MBEDTLS_X509_EXT_BASIC_CONSTRAINTS (1 << 8) /* Supported */ +#define MBEDTLS_X509_EXT_NAME_CONSTRAINTS (1 << 9) +#define MBEDTLS_X509_EXT_POLICY_CONSTRAINTS (1 << 10) +#define MBEDTLS_X509_EXT_EXTENDED_KEY_USAGE (1 << 11) +#define MBEDTLS_X509_EXT_CRL_DISTRIBUTION_POINTS (1 << 12) +#define MBEDTLS_X509_EXT_INIHIBIT_ANYPOLICY (1 << 13) +#define MBEDTLS_X509_EXT_FRESHEST_CRL (1 << 14) + +#define MBEDTLS_X509_EXT_NS_CERT_TYPE (1 << 16) + +/* + * Storage format identifiers + * Recognized formats: PEM and DER + */ +#define MBEDTLS_X509_FORMAT_DER 1 +#define MBEDTLS_X509_FORMAT_PEM 2 + +#define MBEDTLS_X509_MAX_DN_NAME_SIZE 256 /**< Maximum value size of a DN entry */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \addtogroup x509_module + * \{ */ + +/** + * \name Structures for parsing X.509 certificates, CRLs and CSRs + * \{ + */ + +/** + * Type-length-value structure that allows for ASN1 using DER. + */ +typedef mbedtls_asn1_buf mbedtls_x509_buf; + +/** + * Container for ASN1 bit strings. + */ +typedef mbedtls_asn1_bitstring mbedtls_x509_bitstring; + +/** + * Container for ASN1 named information objects. + * It allows for Relative Distinguished Names (e.g. cn=localhost,ou=code,etc.). + */ +typedef mbedtls_asn1_named_data mbedtls_x509_name; + +/** + * Container for a sequence of ASN.1 items + */ +typedef mbedtls_asn1_sequence mbedtls_x509_sequence; + +/** Container for date and time (precision in seconds). */ +typedef struct mbedtls_x509_time +{ + int year, mon, day; /**< Date. */ + int hour, min, sec; /**< Time. */ +} +mbedtls_x509_time; + +/** \} name Structures for parsing X.509 certificates, CRLs and CSRs */ +/** \} addtogroup x509_module */ + +/** + * \brief Store the certificate DN in printable form into buf; + * no more than size characters will be written. + * + * \param buf Buffer to write to + * \param size Maximum size of buffer + * \param dn The X509 name to represent + * + * \return The length of the string written (not including the + * terminated nul byte), or a negative error code. + */ +int mbedtls_x509_dn_gets( char *buf, size_t size, const mbedtls_x509_name *dn ); + +/** + * \brief Store the certificate serial in printable form into buf; + * no more than size characters will be written. + * + * \param buf Buffer to write to + * \param size Maximum size of buffer + * \param serial The X509 serial to represent + * + * \return The length of the string written (not including the + * terminated nul byte), or a negative error code. + */ +int mbedtls_x509_serial_gets( char *buf, size_t size, const mbedtls_x509_buf *serial ); + +/** + * \brief Check a given mbedtls_x509_time against the system time + * and tell if it's in the past. + * + * \note Intended usage is "if( is_past( valid_to ) ) ERROR". + * Hence the return value of 1 if on internal errors. + * + * \param to mbedtls_x509_time to check + * + * \return 1 if the given time is in the past or an error occured, + * 0 otherwise. + */ +int mbedtls_x509_time_is_past( const mbedtls_x509_time *to ); + +/** + * \brief Check a given mbedtls_x509_time against the system time + * and tell if it's in the future. + * + * \note Intended usage is "if( is_future( valid_from ) ) ERROR". + * Hence the return value of 1 if on internal errors. + * + * \param from mbedtls_x509_time to check + * + * \return 1 if the given time is in the future or an error occured, + * 0 otherwise. + */ +int mbedtls_x509_time_is_future( const mbedtls_x509_time *from ); + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_x509_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +/* + * Internal module functions. You probably do not want to use these unless you + * know you do. + */ +int mbedtls_x509_get_name( unsigned char **p, const unsigned char *end, + mbedtls_x509_name *cur ); +int mbedtls_x509_get_alg_null( unsigned char **p, const unsigned char *end, + mbedtls_x509_buf *alg ); +int mbedtls_x509_get_alg( unsigned char **p, const unsigned char *end, + mbedtls_x509_buf *alg, mbedtls_x509_buf *params ); +#if defined(MBEDTLS_X509_RSASSA_PSS_SUPPORT) +int mbedtls_x509_get_rsassa_pss_params( const mbedtls_x509_buf *params, + mbedtls_md_type_t *md_alg, mbedtls_md_type_t *mgf_md, + int *salt_len ); +#endif +int mbedtls_x509_get_sig( unsigned char **p, const unsigned char *end, mbedtls_x509_buf *sig ); +int mbedtls_x509_get_sig_alg( const mbedtls_x509_buf *sig_oid, const mbedtls_x509_buf *sig_params, + mbedtls_md_type_t *md_alg, mbedtls_pk_type_t *pk_alg, + void **sig_opts ); +int mbedtls_x509_get_time( unsigned char **p, const unsigned char *end, + mbedtls_x509_time *t ); +int mbedtls_x509_get_serial( unsigned char **p, const unsigned char *end, + mbedtls_x509_buf *serial ); +int mbedtls_x509_get_ext( unsigned char **p, const unsigned char *end, + mbedtls_x509_buf *ext, int tag ); +int mbedtls_x509_sig_alg_gets( char *buf, size_t size, const mbedtls_x509_buf *sig_oid, + mbedtls_pk_type_t pk_alg, mbedtls_md_type_t md_alg, + const void *sig_opts ); +int mbedtls_x509_key_size_helper( char *buf, size_t buf_size, const char *name ); +int mbedtls_x509_string_to_names( mbedtls_asn1_named_data **head, const char *name ); +int mbedtls_x509_set_extension( mbedtls_asn1_named_data **head, const char *oid, size_t oid_len, + int critical, const unsigned char *val, + size_t val_len ); +int mbedtls_x509_write_extensions( unsigned char **p, unsigned char *start, + mbedtls_asn1_named_data *first ); +int mbedtls_x509_write_names( unsigned char **p, unsigned char *start, + mbedtls_asn1_named_data *first ); +int mbedtls_x509_write_sig( unsigned char **p, unsigned char *start, + const char *oid, size_t oid_len, + unsigned char *sig, size_t size ); + +#define MBEDTLS_X509_SAFE_SNPRINTF \ + do { \ + if( ret < 0 || (size_t) ret >= n ) \ + return( MBEDTLS_ERR_X509_BUFFER_TOO_SMALL ); \ + \ + n -= (size_t) ret; \ + p += (size_t) ret; \ + } while( 0 ) + +#ifdef __cplusplus +} +#endif + +#endif /* x509.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_crl.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_crl.h new file mode 100644 index 000000000..08a4283a6 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_crl.h @@ -0,0 +1,174 @@ +/** + * \file x509_crl.h + * + * \brief X.509 certificate revocation list parsing + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_X509_CRL_H +#define MBEDTLS_X509_CRL_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "x509.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \addtogroup x509_module + * \{ */ + +/** + * \name Structures and functions for parsing CRLs + * \{ + */ + +/** + * Certificate revocation list entry. + * Contains the CA-specific serial numbers and revocation dates. + */ +typedef struct mbedtls_x509_crl_entry +{ + mbedtls_x509_buf raw; + + mbedtls_x509_buf serial; + + mbedtls_x509_time revocation_date; + + mbedtls_x509_buf entry_ext; + + struct mbedtls_x509_crl_entry *next; +} +mbedtls_x509_crl_entry; + +/** + * Certificate revocation list structure. + * Every CRL may have multiple entries. + */ +typedef struct mbedtls_x509_crl +{ + mbedtls_x509_buf raw; /**< The raw certificate data (DER). */ + mbedtls_x509_buf tbs; /**< The raw certificate body (DER). The part that is To Be Signed. */ + + int version; /**< CRL version (1=v1, 2=v2) */ + mbedtls_x509_buf sig_oid; /**< CRL signature type identifier */ + + mbedtls_x509_buf issuer_raw; /**< The raw issuer data (DER). */ + + mbedtls_x509_name issuer; /**< The parsed issuer data (named information object). */ + + mbedtls_x509_time this_update; + mbedtls_x509_time next_update; + + mbedtls_x509_crl_entry entry; /**< The CRL entries containing the certificate revocation times for this CA. */ + + mbedtls_x509_buf crl_ext; + + mbedtls_x509_buf sig_oid2; + mbedtls_x509_buf sig; + mbedtls_md_type_t sig_md; /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */ + mbedtls_pk_type_t sig_pk; /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */ + void *sig_opts; /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */ + + struct mbedtls_x509_crl *next; +} +mbedtls_x509_crl; + +/** + * \brief Parse a DER-encoded CRL and append it to the chained list + * + * \param chain points to the start of the chain + * \param buf buffer holding the CRL data in DER format + * \param buflen size of the buffer + * (including the terminating null byte for PEM data) + * + * \return 0 if successful, or a specific X509 or PEM error code + */ +int mbedtls_x509_crl_parse_der( mbedtls_x509_crl *chain, + const unsigned char *buf, size_t buflen ); +/** + * \brief Parse one or more CRLs and append them to the chained list + * + * \note Mutliple CRLs are accepted only if using PEM format + * + * \param chain points to the start of the chain + * \param buf buffer holding the CRL data in PEM or DER format + * \param buflen size of the buffer + * (including the terminating null byte for PEM data) + * + * \return 0 if successful, or a specific X509 or PEM error code + */ +int mbedtls_x509_crl_parse( mbedtls_x509_crl *chain, const unsigned char *buf, size_t buflen ); + +#if defined(MBEDTLS_FS_IO) +/** + * \brief Load one or more CRLs and append them to the chained list + * + * \note Mutliple CRLs are accepted only if using PEM format + * + * \param chain points to the start of the chain + * \param path filename to read the CRLs from (in PEM or DER encoding) + * + * \return 0 if successful, or a specific X509 or PEM error code + */ +int mbedtls_x509_crl_parse_file( mbedtls_x509_crl *chain, const char *path ); +#endif /* MBEDTLS_FS_IO */ + +/** + * \brief Returns an informational string about the CRL. + * + * \param buf Buffer to write to + * \param size Maximum size of buffer + * \param prefix A line prefix + * \param crl The X509 CRL to represent + * + * \return The length of the string written (not including the + * terminated nul byte), or a negative error code. + */ +int mbedtls_x509_crl_info( char *buf, size_t size, const char *prefix, + const mbedtls_x509_crl *crl ); + +/** + * \brief Initialize a CRL (chain) + * + * \param crl CRL chain to initialize + */ +void mbedtls_x509_crl_init( mbedtls_x509_crl *crl ); + +/** + * \brief Unallocate all CRL data + * + * \param crl CRL chain to free + */ +void mbedtls_x509_crl_free( mbedtls_x509_crl *crl ); + +/* \} name */ +/* \} addtogroup x509_module */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_x509_crl.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_crt.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_crt.h new file mode 100644 index 000000000..670bd10d8 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_crt.h @@ -0,0 +1,785 @@ +/** + * \file x509_crt.h + * + * \brief X.509 certificate parsing and writing + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_X509_CRT_H +#define MBEDTLS_X509_CRT_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "x509.h" +#include "x509_crl.h" + +/** + * \addtogroup x509_module + * \{ + */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \name Structures and functions for parsing and writing X.509 certificates + * \{ + */ + +/** + * Container for an X.509 certificate. The certificate may be chained. + */ +typedef struct mbedtls_x509_crt +{ + mbedtls_x509_buf raw; /**< The raw certificate data (DER). */ + mbedtls_x509_buf tbs; /**< The raw certificate body (DER). The part that is To Be Signed. */ + + int version; /**< The X.509 version. (1=v1, 2=v2, 3=v3) */ + mbedtls_x509_buf serial; /**< Unique id for certificate issued by a specific CA. */ + mbedtls_x509_buf sig_oid; /**< Signature algorithm, e.g. sha1RSA */ + + mbedtls_x509_buf issuer_raw; /**< The raw issuer data (DER). Used for quick comparison. */ + mbedtls_x509_buf subject_raw; /**< The raw subject data (DER). Used for quick comparison. */ + + mbedtls_x509_name issuer; /**< The parsed issuer data (named information object). */ + mbedtls_x509_name subject; /**< The parsed subject data (named information object). */ + + mbedtls_x509_time valid_from; /**< Start time of certificate validity. */ + mbedtls_x509_time valid_to; /**< End time of certificate validity. */ + + mbedtls_pk_context pk; /**< Container for the public key context. */ + + mbedtls_x509_buf issuer_id; /**< Optional X.509 v2/v3 issuer unique identifier. */ + mbedtls_x509_buf subject_id; /**< Optional X.509 v2/v3 subject unique identifier. */ + mbedtls_x509_buf v3_ext; /**< Optional X.509 v3 extensions. */ + mbedtls_x509_sequence subject_alt_names; /**< Optional list of Subject Alternative Names (Only dNSName supported). */ + + int ext_types; /**< Bit string containing detected and parsed extensions */ + int ca_istrue; /**< Optional Basic Constraint extension value: 1 if this certificate belongs to a CA, 0 otherwise. */ + int max_pathlen; /**< Optional Basic Constraint extension value: The maximum path length to the root certificate. Path length is 1 higher than RFC 5280 'meaning', so 1+ */ + + unsigned int key_usage; /**< Optional key usage extension value: See the values in x509.h */ + + mbedtls_x509_sequence ext_key_usage; /**< Optional list of extended key usage OIDs. */ + + unsigned char ns_cert_type; /**< Optional Netscape certificate type extension value: See the values in x509.h */ + + mbedtls_x509_buf sig; /**< Signature: hash of the tbs part signed with the private key. */ + mbedtls_md_type_t sig_md; /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */ + mbedtls_pk_type_t sig_pk; /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */ + void *sig_opts; /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */ + + struct mbedtls_x509_crt *next; /**< Next certificate in the CA-chain. */ +} +mbedtls_x509_crt; + +/** + * Build flag from an algorithm/curve identifier (pk, md, ecp) + * Since 0 is always XXX_NONE, ignore it. + */ +#define MBEDTLS_X509_ID_FLAG( id ) ( 1 << ( (id) - 1 ) ) + +/** + * Security profile for certificate verification. + * + * All lists are bitfields, built by ORing flags from MBEDTLS_X509_ID_FLAG(). + */ +typedef struct mbedtls_x509_crt_profile +{ + uint32_t allowed_mds; /**< MDs for signatures */ + uint32_t allowed_pks; /**< PK algs for signatures */ + uint32_t allowed_curves; /**< Elliptic curves for ECDSA */ + uint32_t rsa_min_bitlen; /**< Minimum size for RSA keys */ +} +mbedtls_x509_crt_profile; + +#define MBEDTLS_X509_CRT_VERSION_1 0 +#define MBEDTLS_X509_CRT_VERSION_2 1 +#define MBEDTLS_X509_CRT_VERSION_3 2 + +#define MBEDTLS_X509_RFC5280_MAX_SERIAL_LEN 32 +#define MBEDTLS_X509_RFC5280_UTC_TIME_LEN 15 + +#if !defined( MBEDTLS_X509_MAX_FILE_PATH_LEN ) +#define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 +#endif + +/** + * Container for writing a certificate (CRT) + */ +typedef struct mbedtls_x509write_cert +{ + int version; + mbedtls_mpi serial; + mbedtls_pk_context *subject_key; + mbedtls_pk_context *issuer_key; + mbedtls_asn1_named_data *subject; + mbedtls_asn1_named_data *issuer; + mbedtls_md_type_t md_alg; + char not_before[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1]; + char not_after[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1]; + mbedtls_asn1_named_data *extensions; +} +mbedtls_x509write_cert; + +/** + * Item in a verification chain: cert and flags for it + */ +typedef struct { + mbedtls_x509_crt *crt; + uint32_t flags; +} mbedtls_x509_crt_verify_chain_item; + +/** + * Max size of verification chain: end-entity + intermediates + trusted root + */ +#define MBEDTLS_X509_MAX_VERIFY_CHAIN_SIZE ( MBEDTLS_X509_MAX_INTERMEDIATE_CA + 2 ) + +/** + * Verification chain as built by \c mbedtls_crt_verify_chain() + */ +typedef struct +{ + mbedtls_x509_crt_verify_chain_item items[MBEDTLS_X509_MAX_VERIFY_CHAIN_SIZE]; + unsigned len; +} mbedtls_x509_crt_verify_chain; + +#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE) + +/** + * \brief Context for resuming X.509 verify operations + */ +typedef struct +{ + /* for check_signature() */ + mbedtls_pk_restart_ctx pk; + + /* for find_parent_in() */ + mbedtls_x509_crt *parent; /* non-null iff parent_in in progress */ + mbedtls_x509_crt *fallback_parent; + int fallback_signature_is_good; + + /* for find_parent() */ + int parent_is_trusted; /* -1 if find_parent is not in progress */ + + /* for verify_chain() */ + enum { + x509_crt_rs_none, + x509_crt_rs_find_parent, + } in_progress; /* none if no operation is in progress */ + int self_cnt; + mbedtls_x509_crt_verify_chain ver_chain; + +} mbedtls_x509_crt_restart_ctx; + +#else /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */ + +/* Now we can declare functions that take a pointer to that */ +typedef void mbedtls_x509_crt_restart_ctx; + +#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */ + +#if defined(MBEDTLS_X509_CRT_PARSE_C) +/** + * Default security profile. Should provide a good balance between security + * and compatibility with current deployments. + */ +extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_default; + +/** + * Expected next default profile. Recommended for new deployments. + * Currently targets a 128-bit security level, except for RSA-2048. + */ +extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_next; + +/** + * NSA Suite B profile. + */ +extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_suiteb; + +/** + * \brief Parse a single DER formatted certificate and add it + * to the chained list. + * + * \param chain points to the start of the chain + * \param buf buffer holding the certificate DER data + * \param buflen size of the buffer + * + * \return 0 if successful, or a specific X509 or PEM error code + */ +int mbedtls_x509_crt_parse_der( mbedtls_x509_crt *chain, const unsigned char *buf, + size_t buflen ); + +/** + * \brief Parse one DER-encoded or one or more concatenated PEM-encoded + * certificates and add them to the chained list. + * + * For CRTs in PEM encoding, the function parses permissively: + * if at least one certificate can be parsed, the function + * returns the number of certificates for which parsing failed + * (hence \c 0 if all certificates were parsed successfully). + * If no certificate could be parsed, the function returns + * the first (negative) error encountered during parsing. + * + * PEM encoded certificates may be interleaved by other data + * such as human readable descriptions of their content, as + * long as the certificates are enclosed in the PEM specific + * '-----{BEGIN/END} CERTIFICATE-----' delimiters. + * + * \param chain The chain to which to add the parsed certificates. + * \param buf The buffer holding the certificate data in PEM or DER format. + * For certificates in PEM encoding, this may be a concatenation + * of multiple certificates; for DER encoding, the buffer must + * comprise exactly one certificate. + * \param buflen The size of \p buf, including the terminating \c NULL byte + * in case of PEM encoded data. + * + * \return \c 0 if all certificates were parsed successfully. + * \return The (positive) number of certificates that couldn't + * be parsed if parsing was partly successful (see above). + * \return A negative X509 or PEM error code otherwise. + * + */ +int mbedtls_x509_crt_parse( mbedtls_x509_crt *chain, const unsigned char *buf, size_t buflen ); + +#if defined(MBEDTLS_FS_IO) +/** + * \brief Load one or more certificates and add them + * to the chained list. Parses permissively. If some + * certificates can be parsed, the result is the number + * of failed certificates it encountered. If none complete + * correctly, the first error is returned. + * + * \param chain points to the start of the chain + * \param path filename to read the certificates from + * + * \return 0 if all certificates parsed successfully, a positive number + * if partly successful or a specific X509 or PEM error code + */ +int mbedtls_x509_crt_parse_file( mbedtls_x509_crt *chain, const char *path ); + +/** + * \brief Load one or more certificate files from a path and add them + * to the chained list. Parses permissively. If some + * certificates can be parsed, the result is the number + * of failed certificates it encountered. If none complete + * correctly, the first error is returned. + * + * \param chain points to the start of the chain + * \param path directory / folder to read the certificate files from + * + * \return 0 if all certificates parsed successfully, a positive number + * if partly successful or a specific X509 or PEM error code + */ +int mbedtls_x509_crt_parse_path( mbedtls_x509_crt *chain, const char *path ); +#endif /* MBEDTLS_FS_IO */ + +/** + * \brief Returns an informational string about the + * certificate. + * + * \param buf Buffer to write to + * \param size Maximum size of buffer + * \param prefix A line prefix + * \param crt The X509 certificate to represent + * + * \return The length of the string written (not including the + * terminated nul byte), or a negative error code. + */ +int mbedtls_x509_crt_info( char *buf, size_t size, const char *prefix, + const mbedtls_x509_crt *crt ); + +/** + * \brief Returns an informational string about the + * verification status of a certificate. + * + * \param buf Buffer to write to + * \param size Maximum size of buffer + * \param prefix A line prefix + * \param flags Verification flags created by mbedtls_x509_crt_verify() + * + * \return The length of the string written (not including the + * terminated nul byte), or a negative error code. + */ +int mbedtls_x509_crt_verify_info( char *buf, size_t size, const char *prefix, + uint32_t flags ); + +/** + * \brief Verify the certificate signature + * + * The verify callback is a user-supplied callback that + * can clear / modify / add flags for a certificate. If set, + * the verification callback is called for each + * certificate in the chain (from the trust-ca down to the + * presented crt). The parameters for the callback are: + * (void *parameter, mbedtls_x509_crt *crt, int certificate_depth, + * int *flags). With the flags representing current flags for + * that specific certificate and the certificate depth from + * the bottom (Peer cert depth = 0). + * + * All flags left after returning from the callback + * are also returned to the application. The function should + * return 0 for anything (including invalid certificates) + * other than fatal error, as a non-zero return code + * immediately aborts the verification process. For fatal + * errors, a specific error code should be used (different + * from MBEDTLS_ERR_X509_CERT_VERIFY_FAILED which should not + * be returned at this point), or MBEDTLS_ERR_X509_FATAL_ERROR + * can be used if no better code is available. + * + * \note In case verification failed, the results can be displayed + * using \c mbedtls_x509_crt_verify_info() + * + * \note Same as \c mbedtls_x509_crt_verify_with_profile() with the + * default security profile. + * + * \note It is your responsibility to provide up-to-date CRLs for + * all trusted CAs. If no CRL is provided for the CA that was + * used to sign the certificate, CRL verification is skipped + * silently, that is *without* setting any flag. + * + * \note The \c trust_ca list can contain two types of certificates: + * (1) those of trusted root CAs, so that certificates + * chaining up to those CAs will be trusted, and (2) + * self-signed end-entity certificates to be trusted (for + * specific peers you know) - in that case, the self-signed + * certificate doesn't need to have the CA bit set. + * + * \param crt a certificate (chain) to be verified + * \param trust_ca the list of trusted CAs (see note above) + * \param ca_crl the list of CRLs for trusted CAs (see note above) + * \param cn expected Common Name (can be set to + * NULL if the CN must not be verified) + * \param flags result of the verification + * \param f_vrfy verification function + * \param p_vrfy verification parameter + * + * \return 0 (and flags set to 0) if the chain was verified and valid, + * MBEDTLS_ERR_X509_CERT_VERIFY_FAILED if the chain was verified + * but found to be invalid, in which case *flags will have one + * or more MBEDTLS_X509_BADCERT_XXX or MBEDTLS_X509_BADCRL_XXX + * flags set, or another error (and flags set to 0xffffffff) + * in case of a fatal error encountered during the + * verification process. + */ +int mbedtls_x509_crt_verify( mbedtls_x509_crt *crt, + mbedtls_x509_crt *trust_ca, + mbedtls_x509_crl *ca_crl, + const char *cn, uint32_t *flags, + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), + void *p_vrfy ); + +/** + * \brief Verify the certificate signature according to profile + * + * \note Same as \c mbedtls_x509_crt_verify(), but with explicit + * security profile. + * + * \note The restrictions on keys (RSA minimum size, allowed curves + * for ECDSA) apply to all certificates: trusted root, + * intermediate CAs if any, and end entity certificate. + * + * \param crt a certificate (chain) to be verified + * \param trust_ca the list of trusted CAs + * \param ca_crl the list of CRLs for trusted CAs + * \param profile security profile for verification + * \param cn expected Common Name (can be set to + * NULL if the CN must not be verified) + * \param flags result of the verification + * \param f_vrfy verification function + * \param p_vrfy verification parameter + * + * \return 0 if successful or MBEDTLS_ERR_X509_CERT_VERIFY_FAILED + * in which case *flags will have one or more + * MBEDTLS_X509_BADCERT_XXX or MBEDTLS_X509_BADCRL_XXX flags + * set, + * or another error in case of a fatal error encountered + * during the verification process. + */ +int mbedtls_x509_crt_verify_with_profile( mbedtls_x509_crt *crt, + mbedtls_x509_crt *trust_ca, + mbedtls_x509_crl *ca_crl, + const mbedtls_x509_crt_profile *profile, + const char *cn, uint32_t *flags, + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), + void *p_vrfy ); + +/** + * \brief Restartable version of \c mbedtls_crt_verify_with_profile() + * + * \note Performs the same job as \c mbedtls_crt_verify_with_profile() + * but can return early and restart according to the limit + * set with \c mbedtls_ecp_set_max_ops() to reduce blocking. + * + * \param crt a certificate (chain) to be verified + * \param trust_ca the list of trusted CAs + * \param ca_crl the list of CRLs for trusted CAs + * \param profile security profile for verification + * \param cn expected Common Name (can be set to + * NULL if the CN must not be verified) + * \param flags result of the verification + * \param f_vrfy verification function + * \param p_vrfy verification parameter + * \param rs_ctx restart context (NULL to disable restart) + * + * \return See \c mbedtls_crt_verify_with_profile(), or + * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of + * operations was reached: see \c mbedtls_ecp_set_max_ops(). + */ +int mbedtls_x509_crt_verify_restartable( mbedtls_x509_crt *crt, + mbedtls_x509_crt *trust_ca, + mbedtls_x509_crl *ca_crl, + const mbedtls_x509_crt_profile *profile, + const char *cn, uint32_t *flags, + int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *), + void *p_vrfy, + mbedtls_x509_crt_restart_ctx *rs_ctx ); + +#if defined(MBEDTLS_X509_CHECK_KEY_USAGE) +/** + * \brief Check usage of certificate against keyUsage extension. + * + * \param crt Leaf certificate used. + * \param usage Intended usage(s) (eg MBEDTLS_X509_KU_KEY_ENCIPHERMENT + * before using the certificate to perform an RSA key + * exchange). + * + * \note Except for decipherOnly and encipherOnly, a bit set in the + * usage argument means this bit MUST be set in the + * certificate. For decipherOnly and encipherOnly, it means + * that bit MAY be set. + * + * \return 0 is these uses of the certificate are allowed, + * MBEDTLS_ERR_X509_BAD_INPUT_DATA if the keyUsage extension + * is present but does not match the usage argument. + * + * \note You should only call this function on leaf certificates, on + * (intermediate) CAs the keyUsage extension is automatically + * checked by \c mbedtls_x509_crt_verify(). + */ +int mbedtls_x509_crt_check_key_usage( const mbedtls_x509_crt *crt, + unsigned int usage ); +#endif /* MBEDTLS_X509_CHECK_KEY_USAGE) */ + +#if defined(MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE) +/** + * \brief Check usage of certificate against extendedKeyUsage. + * + * \param crt Leaf certificate used. + * \param usage_oid Intended usage (eg MBEDTLS_OID_SERVER_AUTH or + * MBEDTLS_OID_CLIENT_AUTH). + * \param usage_len Length of usage_oid (eg given by MBEDTLS_OID_SIZE()). + * + * \return 0 if this use of the certificate is allowed, + * MBEDTLS_ERR_X509_BAD_INPUT_DATA if not. + * + * \note Usually only makes sense on leaf certificates. + */ +int mbedtls_x509_crt_check_extended_key_usage( const mbedtls_x509_crt *crt, + const char *usage_oid, + size_t usage_len ); +#endif /* MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE */ + +#if defined(MBEDTLS_X509_CRL_PARSE_C) +/** + * \brief Verify the certificate revocation status + * + * \param crt a certificate to be verified + * \param crl the CRL to verify against + * + * \return 1 if the certificate is revoked, 0 otherwise + * + */ +int mbedtls_x509_crt_is_revoked( const mbedtls_x509_crt *crt, const mbedtls_x509_crl *crl ); +#endif /* MBEDTLS_X509_CRL_PARSE_C */ + +/** + * \brief Initialize a certificate (chain) + * + * \param crt Certificate chain to initialize + */ +void mbedtls_x509_crt_init( mbedtls_x509_crt *crt ); + +/** + * \brief Unallocate all certificate data + * + * \param crt Certificate chain to free + */ +void mbedtls_x509_crt_free( mbedtls_x509_crt *crt ); + +#if defined(MBEDTLS_ECDSA_C) && defined(MBEDTLS_ECP_RESTARTABLE) +/** + * \brief Initialize a restart context + */ +void mbedtls_x509_crt_restart_init( mbedtls_x509_crt_restart_ctx *ctx ); + +/** + * \brief Free the components of a restart context + */ +void mbedtls_x509_crt_restart_free( mbedtls_x509_crt_restart_ctx *ctx ); +#endif /* MBEDTLS_ECDSA_C && MBEDTLS_ECP_RESTARTABLE */ +#endif /* MBEDTLS_X509_CRT_PARSE_C */ + +/* \} name */ +/* \} addtogroup x509_module */ + +#if defined(MBEDTLS_X509_CRT_WRITE_C) +/** + * \brief Initialize a CRT writing context + * + * \param ctx CRT context to initialize + */ +void mbedtls_x509write_crt_init( mbedtls_x509write_cert *ctx ); + +/** + * \brief Set the verion for a Certificate + * Default: MBEDTLS_X509_CRT_VERSION_3 + * + * \param ctx CRT context to use + * \param version version to set (MBEDTLS_X509_CRT_VERSION_1, MBEDTLS_X509_CRT_VERSION_2 or + * MBEDTLS_X509_CRT_VERSION_3) + */ +void mbedtls_x509write_crt_set_version( mbedtls_x509write_cert *ctx, int version ); + +/** + * \brief Set the serial number for a Certificate. + * + * \param ctx CRT context to use + * \param serial serial number to set + * + * \return 0 if successful + */ +int mbedtls_x509write_crt_set_serial( mbedtls_x509write_cert *ctx, const mbedtls_mpi *serial ); + +/** + * \brief Set the validity period for a Certificate + * Timestamps should be in string format for UTC timezone + * i.e. "YYYYMMDDhhmmss" + * e.g. "20131231235959" for December 31st 2013 + * at 23:59:59 + * + * \param ctx CRT context to use + * \param not_before not_before timestamp + * \param not_after not_after timestamp + * + * \return 0 if timestamp was parsed successfully, or + * a specific error code + */ +int mbedtls_x509write_crt_set_validity( mbedtls_x509write_cert *ctx, const char *not_before, + const char *not_after ); + +/** + * \brief Set the issuer name for a Certificate + * Issuer names should contain a comma-separated list + * of OID types and values: + * e.g. "C=UK,O=ARM,CN=mbed TLS CA" + * + * \param ctx CRT context to use + * \param issuer_name issuer name to set + * + * \return 0 if issuer name was parsed successfully, or + * a specific error code + */ +int mbedtls_x509write_crt_set_issuer_name( mbedtls_x509write_cert *ctx, + const char *issuer_name ); + +/** + * \brief Set the subject name for a Certificate + * Subject names should contain a comma-separated list + * of OID types and values: + * e.g. "C=UK,O=ARM,CN=mbed TLS Server 1" + * + * \param ctx CRT context to use + * \param subject_name subject name to set + * + * \return 0 if subject name was parsed successfully, or + * a specific error code + */ +int mbedtls_x509write_crt_set_subject_name( mbedtls_x509write_cert *ctx, + const char *subject_name ); + +/** + * \brief Set the subject public key for the certificate + * + * \param ctx CRT context to use + * \param key public key to include + */ +void mbedtls_x509write_crt_set_subject_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key ); + +/** + * \brief Set the issuer key used for signing the certificate + * + * \param ctx CRT context to use + * \param key private key to sign with + */ +void mbedtls_x509write_crt_set_issuer_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key ); + +/** + * \brief Set the MD algorithm to use for the signature + * (e.g. MBEDTLS_MD_SHA1) + * + * \param ctx CRT context to use + * \param md_alg MD algorithm to use + */ +void mbedtls_x509write_crt_set_md_alg( mbedtls_x509write_cert *ctx, mbedtls_md_type_t md_alg ); + +/** + * \brief Generic function to add to or replace an extension in the + * CRT + * + * \param ctx CRT context to use + * \param oid OID of the extension + * \param oid_len length of the OID + * \param critical if the extension is critical (per the RFC's definition) + * \param val value of the extension OCTET STRING + * \param val_len length of the value data + * + * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED + */ +int mbedtls_x509write_crt_set_extension( mbedtls_x509write_cert *ctx, + const char *oid, size_t oid_len, + int critical, + const unsigned char *val, size_t val_len ); + +/** + * \brief Set the basicConstraints extension for a CRT + * + * \param ctx CRT context to use + * \param is_ca is this a CA certificate + * \param max_pathlen maximum length of certificate chains below this + * certificate (only for CA certificates, -1 is + * inlimited) + * + * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED + */ +int mbedtls_x509write_crt_set_basic_constraints( mbedtls_x509write_cert *ctx, + int is_ca, int max_pathlen ); + +#if defined(MBEDTLS_SHA1_C) +/** + * \brief Set the subjectKeyIdentifier extension for a CRT + * Requires that mbedtls_x509write_crt_set_subject_key() has been + * called before + * + * \param ctx CRT context to use + * + * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED + */ +int mbedtls_x509write_crt_set_subject_key_identifier( mbedtls_x509write_cert *ctx ); + +/** + * \brief Set the authorityKeyIdentifier extension for a CRT + * Requires that mbedtls_x509write_crt_set_issuer_key() has been + * called before + * + * \param ctx CRT context to use + * + * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED + */ +int mbedtls_x509write_crt_set_authority_key_identifier( mbedtls_x509write_cert *ctx ); +#endif /* MBEDTLS_SHA1_C */ + +/** + * \brief Set the Key Usage Extension flags + * (e.g. MBEDTLS_X509_KU_DIGITAL_SIGNATURE | MBEDTLS_X509_KU_KEY_CERT_SIGN) + * + * \param ctx CRT context to use + * \param key_usage key usage flags to set + * + * \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED + */ +int mbedtls_x509write_crt_set_key_usage( mbedtls_x509write_cert *ctx, + unsigned int key_usage ); + +/** + * \brief Set the Netscape Cert Type flags + * (e.g. MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT | MBEDTLS_X509_NS_CERT_TYPE_EMAIL) + * + * \param ctx CRT context to use + * \param ns_cert_type Netscape Cert Type flags to set + * + * \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED + */ +int mbedtls_x509write_crt_set_ns_cert_type( mbedtls_x509write_cert *ctx, + unsigned char ns_cert_type ); + +/** + * \brief Free the contents of a CRT write context + * + * \param ctx CRT context to free + */ +void mbedtls_x509write_crt_free( mbedtls_x509write_cert *ctx ); + +/** + * \brief Write a built up certificate to a X509 DER structure + * Note: data is written at the end of the buffer! Use the + * return value to determine where you should start + * using the buffer + * + * \param ctx certificate to write away + * \param buf buffer to write to + * \param size size of the buffer + * \param f_rng RNG function (for signature, see note) + * \param p_rng RNG parameter + * + * \return length of data written if successful, or a specific + * error code + * + * \note f_rng may be NULL if RSA is used for signature and the + * signature is made offline (otherwise f_rng is desirable + * for countermeasures against timing attacks). + * ECDSA signatures always require a non-NULL f_rng. + */ +int mbedtls_x509write_crt_der( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +#if defined(MBEDTLS_PEM_WRITE_C) +/** + * \brief Write a built up certificate to a X509 PEM string + * + * \param ctx certificate to write away + * \param buf buffer to write to + * \param size size of the buffer + * \param f_rng RNG function (for signature, see note) + * \param p_rng RNG parameter + * + * \return 0 if successful, or a specific error code + * + * \note f_rng may be NULL if RSA is used for signature and the + * signature is made offline (otherwise f_rng is desirable + * for countermeasures against timing attacks). + * ECDSA signatures always require a non-NULL f_rng. + */ +int mbedtls_x509write_crt_pem( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); +#endif /* MBEDTLS_PEM_WRITE_C */ +#endif /* MBEDTLS_X509_CRT_WRITE_C */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_x509_crt.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_csr.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_csr.h new file mode 100644 index 000000000..a3c28048e --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/x509_csr.h @@ -0,0 +1,307 @@ +/** + * \file x509_csr.h + * + * \brief X.509 certificate signing request parsing and writing + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_X509_CSR_H +#define MBEDTLS_X509_CSR_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "x509.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \addtogroup x509_module + * \{ */ + +/** + * \name Structures and functions for X.509 Certificate Signing Requests (CSR) + * \{ + */ + +/** + * Certificate Signing Request (CSR) structure. + */ +typedef struct mbedtls_x509_csr +{ + mbedtls_x509_buf raw; /**< The raw CSR data (DER). */ + mbedtls_x509_buf cri; /**< The raw CertificateRequestInfo body (DER). */ + + int version; /**< CSR version (1=v1). */ + + mbedtls_x509_buf subject_raw; /**< The raw subject data (DER). */ + mbedtls_x509_name subject; /**< The parsed subject data (named information object). */ + + mbedtls_pk_context pk; /**< Container for the public key context. */ + + mbedtls_x509_buf sig_oid; + mbedtls_x509_buf sig; + mbedtls_md_type_t sig_md; /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */ + mbedtls_pk_type_t sig_pk; /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */ + void *sig_opts; /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */ +} +mbedtls_x509_csr; + +/** + * Container for writing a CSR + */ +typedef struct mbedtls_x509write_csr +{ + mbedtls_pk_context *key; + mbedtls_asn1_named_data *subject; + mbedtls_md_type_t md_alg; + mbedtls_asn1_named_data *extensions; +} +mbedtls_x509write_csr; + +#if defined(MBEDTLS_X509_CSR_PARSE_C) +/** + * \brief Load a Certificate Signing Request (CSR) in DER format + * + * \note CSR attributes (if any) are currently silently ignored. + * + * \param csr CSR context to fill + * \param buf buffer holding the CRL data + * \param buflen size of the buffer + * + * \return 0 if successful, or a specific X509 error code + */ +int mbedtls_x509_csr_parse_der( mbedtls_x509_csr *csr, + const unsigned char *buf, size_t buflen ); + +/** + * \brief Load a Certificate Signing Request (CSR), DER or PEM format + * + * \note See notes for \c mbedtls_x509_csr_parse_der() + * + * \param csr CSR context to fill + * \param buf buffer holding the CRL data + * \param buflen size of the buffer + * (including the terminating null byte for PEM data) + * + * \return 0 if successful, or a specific X509 or PEM error code + */ +int mbedtls_x509_csr_parse( mbedtls_x509_csr *csr, const unsigned char *buf, size_t buflen ); + +#if defined(MBEDTLS_FS_IO) +/** + * \brief Load a Certificate Signing Request (CSR) + * + * \note See notes for \c mbedtls_x509_csr_parse() + * + * \param csr CSR context to fill + * \param path filename to read the CSR from + * + * \return 0 if successful, or a specific X509 or PEM error code + */ +int mbedtls_x509_csr_parse_file( mbedtls_x509_csr *csr, const char *path ); +#endif /* MBEDTLS_FS_IO */ + +/** + * \brief Returns an informational string about the + * CSR. + * + * \param buf Buffer to write to + * \param size Maximum size of buffer + * \param prefix A line prefix + * \param csr The X509 CSR to represent + * + * \return The length of the string written (not including the + * terminated nul byte), or a negative error code. + */ +int mbedtls_x509_csr_info( char *buf, size_t size, const char *prefix, + const mbedtls_x509_csr *csr ); + +/** + * \brief Initialize a CSR + * + * \param csr CSR to initialize + */ +void mbedtls_x509_csr_init( mbedtls_x509_csr *csr ); + +/** + * \brief Unallocate all CSR data + * + * \param csr CSR to free + */ +void mbedtls_x509_csr_free( mbedtls_x509_csr *csr ); +#endif /* MBEDTLS_X509_CSR_PARSE_C */ + +/* \} name */ +/* \} addtogroup x509_module */ + +#if defined(MBEDTLS_X509_CSR_WRITE_C) +/** + * \brief Initialize a CSR context + * + * \param ctx CSR context to initialize + */ +void mbedtls_x509write_csr_init( mbedtls_x509write_csr *ctx ); + +/** + * \brief Set the subject name for a CSR + * Subject names should contain a comma-separated list + * of OID types and values: + * e.g. "C=UK,O=ARM,CN=mbed TLS Server 1" + * + * \param ctx CSR context to use + * \param subject_name subject name to set + * + * \return 0 if subject name was parsed successfully, or + * a specific error code + */ +int mbedtls_x509write_csr_set_subject_name( mbedtls_x509write_csr *ctx, + const char *subject_name ); + +/** + * \brief Set the key for a CSR (public key will be included, + * private key used to sign the CSR when writing it) + * + * \param ctx CSR context to use + * \param key Asymetric key to include + */ +void mbedtls_x509write_csr_set_key( mbedtls_x509write_csr *ctx, mbedtls_pk_context *key ); + +/** + * \brief Set the MD algorithm to use for the signature + * (e.g. MBEDTLS_MD_SHA1) + * + * \param ctx CSR context to use + * \param md_alg MD algorithm to use + */ +void mbedtls_x509write_csr_set_md_alg( mbedtls_x509write_csr *ctx, mbedtls_md_type_t md_alg ); + +/** + * \brief Set the Key Usage Extension flags + * (e.g. MBEDTLS_X509_KU_DIGITAL_SIGNATURE | MBEDTLS_X509_KU_KEY_CERT_SIGN) + * + * \param ctx CSR context to use + * \param key_usage key usage flags to set + * + * \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED + * + * \note The <code>decipherOnly</code> flag from the Key Usage + * extension is represented by bit 8 (i.e. + * <code>0x8000</code>), which cannot typically be represented + * in an unsigned char. Therefore, the flag + * <code>decipherOnly</code> (i.e. + * #MBEDTLS_X509_KU_DECIPHER_ONLY) cannot be set using this + * function. + */ +int mbedtls_x509write_csr_set_key_usage( mbedtls_x509write_csr *ctx, unsigned char key_usage ); + +/** + * \brief Set the Netscape Cert Type flags + * (e.g. MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT | MBEDTLS_X509_NS_CERT_TYPE_EMAIL) + * + * \param ctx CSR context to use + * \param ns_cert_type Netscape Cert Type flags to set + * + * \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED + */ +int mbedtls_x509write_csr_set_ns_cert_type( mbedtls_x509write_csr *ctx, + unsigned char ns_cert_type ); + +/** + * \brief Generic function to add to or replace an extension in the + * CSR + * + * \param ctx CSR context to use + * \param oid OID of the extension + * \param oid_len length of the OID + * \param val value of the extension OCTET STRING + * \param val_len length of the value data + * + * \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED + */ +int mbedtls_x509write_csr_set_extension( mbedtls_x509write_csr *ctx, + const char *oid, size_t oid_len, + const unsigned char *val, size_t val_len ); + +/** + * \brief Free the contents of a CSR context + * + * \param ctx CSR context to free + */ +void mbedtls_x509write_csr_free( mbedtls_x509write_csr *ctx ); + +/** + * \brief Write a CSR (Certificate Signing Request) to a + * DER structure + * Note: data is written at the end of the buffer! Use the + * return value to determine where you should start + * using the buffer + * + * \param ctx CSR to write away + * \param buf buffer to write to + * \param size size of the buffer + * \param f_rng RNG function (for signature, see note) + * \param p_rng RNG parameter + * + * \return length of data written if successful, or a specific + * error code + * + * \note f_rng may be NULL if RSA is used for signature and the + * signature is made offline (otherwise f_rng is desirable + * for countermeasures against timing attacks). + * ECDSA signatures always require a non-NULL f_rng. + */ +int mbedtls_x509write_csr_der( mbedtls_x509write_csr *ctx, unsigned char *buf, size_t size, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); + +#if defined(MBEDTLS_PEM_WRITE_C) +/** + * \brief Write a CSR (Certificate Signing Request) to a + * PEM string + * + * \param ctx CSR to write away + * \param buf buffer to write to + * \param size size of the buffer + * \param f_rng RNG function (for signature, see note) + * \param p_rng RNG parameter + * + * \return 0 if successful, or a specific error code + * + * \note f_rng may be NULL if RSA is used for signature and the + * signature is made offline (otherwise f_rng is desirable + * for countermeasures against timing attacks). + * ECDSA signatures always require a non-NULL f_rng. + */ +int mbedtls_x509write_csr_pem( mbedtls_x509write_csr *ctx, unsigned char *buf, size_t size, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng ); +#endif /* MBEDTLS_PEM_WRITE_C */ +#endif /* MBEDTLS_X509_CSR_WRITE_C */ + +#ifdef __cplusplus +} +#endif + +#endif /* mbedtls_x509_csr.h */ diff --git a/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/xtea.h b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/xtea.h new file mode 100644 index 000000000..b47f55350 --- /dev/null +++ b/roms/skiboot/libstb/crypto/mbedtls/include/mbedtls/xtea.h @@ -0,0 +1,139 @@ +/** + * \file xtea.h + * + * \brief XTEA block cipher (32-bit) + */ +/* + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_XTEA_H +#define MBEDTLS_XTEA_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +#define MBEDTLS_XTEA_ENCRYPT 1 +#define MBEDTLS_XTEA_DECRYPT 0 + +#define MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH -0x0028 /**< The data input has an invalid length. */ + +/* MBEDTLS_ERR_XTEA_HW_ACCEL_FAILED is deprecated and should not be used. */ +#define MBEDTLS_ERR_XTEA_HW_ACCEL_FAILED -0x0029 /**< XTEA hardware accelerator failed. */ + +#ifdef __cplusplus +extern "C" { +#endif + +#if !defined(MBEDTLS_XTEA_ALT) +// Regular implementation +// + +/** + * \brief XTEA context structure + */ +typedef struct mbedtls_xtea_context +{ + uint32_t k[4]; /*!< key */ +} +mbedtls_xtea_context; + +#else /* MBEDTLS_XTEA_ALT */ +#include "xtea_alt.h" +#endif /* MBEDTLS_XTEA_ALT */ + +/** + * \brief Initialize XTEA context + * + * \param ctx XTEA context to be initialized + */ +void mbedtls_xtea_init( mbedtls_xtea_context *ctx ); + +/** + * \brief Clear XTEA context + * + * \param ctx XTEA context to be cleared + */ +void mbedtls_xtea_free( mbedtls_xtea_context *ctx ); + +/** + * \brief XTEA key schedule + * + * \param ctx XTEA context to be initialized + * \param key the secret key + */ +void mbedtls_xtea_setup( mbedtls_xtea_context *ctx, const unsigned char key[16] ); + +/** + * \brief XTEA cipher function + * + * \param ctx XTEA context + * \param mode MBEDTLS_XTEA_ENCRYPT or MBEDTLS_XTEA_DECRYPT + * \param input 8-byte input block + * \param output 8-byte output block + * + * \return 0 if successful + */ +int mbedtls_xtea_crypt_ecb( mbedtls_xtea_context *ctx, + int mode, + const unsigned char input[8], + unsigned char output[8] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief XTEA CBC cipher function + * + * \param ctx XTEA context + * \param mode MBEDTLS_XTEA_ENCRYPT or MBEDTLS_XTEA_DECRYPT + * \param length the length of input, multiple of 8 + * \param iv initialization vector for CBC mode + * \param input input block + * \param output output block + * + * \return 0 if successful, + * MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH if the length % 8 != 0 + */ +int mbedtls_xtea_crypt_cbc( mbedtls_xtea_context *ctx, + int mode, + size_t length, + unsigned char iv[8], + const unsigned char *input, + unsigned char *output); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +#if defined(MBEDTLS_SELF_TEST) + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_xtea_self_test( int verbose ); + +#endif /* MBEDTLS_SELF_TEST */ + +#ifdef __cplusplus +} +#endif + +#endif /* xtea.h */ |