Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

15 files changed, 5118 insertions, 0 deletions

diff --git a/roms/u-boot-sam460ex/drivers/i2c/Makefile b/roms/u-boot-sam460ex/drivers/i2c/Makefile
new file mode 100644
index 000000000..d2c251546
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/Makefile
@@ -0,0 +1,60 @@
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libi2c.a
+
+COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
+COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
+COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
+COBJS-$(CONFIG_I2C_KIRKWOOD) += kirkwood_i2c.o
+COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
+COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
+COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
+COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
+COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
+COBJS-$(CONFIG_PPC4XX_I2C) += ppc4xx_i2c.o
+COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
+COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
+COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
+COBJS-$(CONFIG_SPEAR_I2C) += spr_i2c.o
+COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/roms/u-boot-sam460ex/drivers/i2c/bfin-twi_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/bfin-twi_i2c.c
new file mode 100644
index 000000000..b3a04d320
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/bfin-twi_i2c.c
@@ -0,0 +1,378 @@
+/*
+ * i2c.c - driver for Blackfin on-chip TWI/I2C
+ *
+ * Copyright (c) 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/twi.h>
+
+/* Every register is 32bit aligned, but only 16bits in size */
+#define ureg(name) u16 name; u16 __pad_##name;
+struct twi_regs {
+	ureg(clkdiv);
+	ureg(control);
+	ureg(slave_ctl);
+	ureg(slave_stat);
+	ureg(slave_addr);
+	ureg(master_ctl);
+	ureg(master_stat);
+	ureg(master_addr);
+	ureg(int_stat);
+	ureg(int_mask);
+	ureg(fifo_ctl);
+	ureg(fifo_stat);
+	char __pad[0x50];
+	ureg(xmt_data8);
+	ureg(xmt_data16);
+	ureg(rcv_data8);
+	ureg(rcv_data16);
+};
+#undef ureg
+
+/* U-Boot I2C framework allows only one active device at a time.  */
+#ifdef TWI_CLKDIV
+#define TWI0_CLKDIV TWI_CLKDIV
+#endif
+static volatile struct twi_regs *twi = (void *)TWI0_CLKDIV;
+
+#ifdef DEBUG
+# define dmemset(s, c, n) memset(s, c, n)
+#else
+# define dmemset(s, c, n)
+#endif
+#define debugi(fmt, args...) \
+	debug( \
+		"MSTAT:0x%03x FSTAT:0x%x ISTAT:0x%02x\t%-20s:%-3i: " fmt "\n", \
+		twi->master_stat, twi->fifo_stat, twi->int_stat, \
+		__func__, __LINE__, ## args)
+
+#ifdef CONFIG_TWICLK_KHZ
+# error do not define CONFIG_TWICLK_KHZ ... use CONFIG_SYS_I2C_SPEED
+#endif
+
+/*
+ * The way speed is changed into duty often results in integer truncation
+ * with 50% duty, so we'll force rounding up to the next duty by adding 1
+ * to the max.  In practice this will get us a speed of something like
+ * 385 KHz.  The other limit is easy to handle as it is only 8 bits.
+ */
+#define I2C_SPEED_MAX             400000
+#define I2C_SPEED_TO_DUTY(speed)  (5000000 / (speed))
+#define I2C_DUTY_MAX              (I2C_SPEED_TO_DUTY(I2C_SPEED_MAX) + 1)
+#define I2C_DUTY_MIN              0xff	/* 8 bit limited */
+#define SYS_I2C_DUTY              I2C_SPEED_TO_DUTY(CONFIG_SYS_I2C_SPEED)
+/* Note: duty is inverse of speed, so the comparisons below are correct */
+#if SYS_I2C_DUTY < I2C_DUTY_MAX || SYS_I2C_DUTY > I2C_DUTY_MIN
+# error "The Blackfin I2C hardware can only operate 20KHz - 400KHz"
+#endif
+
+/* All transfers are described by this data structure */
+struct i2c_msg {
+	u8 flags;
+#define I2C_M_COMBO		0x4
+#define I2C_M_STOP		0x2
+#define I2C_M_READ		0x1
+	int len;		/* msg length */
+	u8 *buf;		/* pointer to msg data */
+	int alen;		/* addr length */
+	u8 *abuf;		/* addr buffer */
+};
+
+/* Allow msec timeout per ~byte transfer */
+#define I2C_TIMEOUT 10
+
+/**
+ * wait_for_completion - manage the actual i2c transfer
+ *	@msg: the i2c msg
+ */
+static int wait_for_completion(struct i2c_msg *msg)
+{
+	uint16_t int_stat;
+	ulong timebase = get_timer(0);
+
+	do {
+		int_stat = twi->int_stat;
+
+		if (int_stat & XMTSERV) {
+			debugi("processing XMTSERV");
+			twi->int_stat = XMTSERV;
+			SSYNC();
+			if (msg->alen) {
+				twi->xmt_data8 = *(msg->abuf++);
+				--msg->alen;
+			} else if (!(msg->flags & I2C_M_COMBO) && msg->len) {
+				twi->xmt_data8 = *(msg->buf++);
+				--msg->len;
+			} else {
+				twi->master_ctl |= (msg->flags & I2C_M_COMBO) ? RSTART | MDIR : STOP;
+				SSYNC();
+			}
+		}
+		if (int_stat & RCVSERV) {
+			debugi("processing RCVSERV");
+			twi->int_stat = RCVSERV;
+			SSYNC();
+			if (msg->len) {
+				*(msg->buf++) = twi->rcv_data8;
+				--msg->len;
+			} else if (msg->flags & I2C_M_STOP) {
+				twi->master_ctl |= STOP;
+				SSYNC();
+			}
+		}
+		if (int_stat & MERR) {
+			debugi("processing MERR");
+			twi->int_stat = MERR;
+			SSYNC();
+			return msg->len;
+		}
+		if (int_stat & MCOMP) {
+			debugi("processing MCOMP");
+			twi->int_stat = MCOMP;
+			SSYNC();
+			if (msg->flags & I2C_M_COMBO && msg->len) {
+				twi->master_ctl = (twi->master_ctl & ~RSTART) |
+					(min(msg->len, 0xff) << 6) | MEN | MDIR;
+				SSYNC();
+			} else
+				break;
+		}
+
+		/* If we were able to do something, reset timeout */
+		if (int_stat)
+			timebase = get_timer(0);
+
+	} while (get_timer(timebase) < I2C_TIMEOUT);
+
+	return msg->len;
+}
+
+/**
+ * i2c_transfer - setup an i2c transfer
+ *	@return: 0 if things worked, non-0 if things failed
+ *
+ *	Here we just get the i2c stuff all prepped and ready, and then tail off
+ *	into wait_for_completion() for all the bits to go.
+ */
+static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, int len, u8 flags)
+{
+	uchar addr_buffer[] = {
+		(addr >>  0),
+		(addr >>  8),
+		(addr >> 16),
+	};
+	struct i2c_msg msg = {
+		.flags = flags | (len >= 0xff ? I2C_M_STOP : 0),
+		.buf   = buffer,
+		.len   = len,
+		.abuf  = addr_buffer,
+		.alen  = alen,
+	};
+	int ret;
+
+	dmemset(buffer, 0xff, len);
+	debugi("chip=0x%x addr=0x%02x alen=%i buf[0]=0x%02x len=%i flags=0x%02x[%s] ",
+		chip, addr, alen, buffer[0], len, flags, (flags & I2C_M_READ ? "rd" : "wr"));
+
+	/* wait for things to settle */
+	while (twi->master_stat & BUSBUSY)
+		if (ctrlc())
+			return 1;
+
+	/* Set Transmit device address */
+	twi->master_addr = chip;
+
+	/* Clear the FIFO before starting things */
+	twi->fifo_ctl = XMTFLUSH | RCVFLUSH;
+	SSYNC();
+	twi->fifo_ctl = 0;
+	SSYNC();
+
+	/* prime the pump */
+	if (msg.alen) {
+		len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len;
+		debugi("first byte=0x%02x", *msg.abuf);
+		twi->xmt_data8 = *(msg.abuf++);
+		--msg.alen;
+	} else if (!(msg.flags & I2C_M_READ) && msg.len) {
+		debugi("first byte=0x%02x", *msg.buf);
+		twi->xmt_data8 = *(msg.buf++);
+		--msg.len;
+	}
+
+	/* clear int stat */
+	twi->master_stat = -1;
+	twi->int_stat = -1;
+	twi->int_mask = 0;
+	SSYNC();
+
+	/* Master enable */
+	twi->master_ctl =
+			(twi->master_ctl & FAST) |
+			(min(len, 0xff) << 6) | MEN |
+			((msg.flags & I2C_M_READ) ? MDIR : 0);
+	SSYNC();
+	debugi("CTL=0x%04x", twi->master_ctl);
+
+	/* process the rest */
+	ret = wait_for_completion(&msg);
+	debugi("ret=%d", ret);
+
+	if (ret) {
+		twi->master_ctl &= ~MEN;
+		twi->control &= ~TWI_ENA;
+		SSYNC();
+		twi->control |= TWI_ENA;
+		SSYNC();
+	}
+
+	return ret;
+}
+
+/**
+ * i2c_set_bus_speed - set i2c bus speed
+ *	@speed: bus speed (in HZ)
+ */
+int i2c_set_bus_speed(unsigned int speed)
+{
+	u16 clkdiv = I2C_SPEED_TO_DUTY(speed);
+
+	/* Set TWI interface clock */
+	if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN)
+		return -1;
+	twi->clkdiv = (clkdiv << 8) | (clkdiv & 0xff);
+
+	/* Don't turn it on */
+	twi->master_ctl = (speed > 100000 ? FAST : 0);
+
+	return 0;
+}
+
+/**
+ * i2c_get_bus_speed - get i2c bus speed
+ *	@speed: bus speed (in HZ)
+ */
+unsigned int i2c_get_bus_speed(void)
+{
+	/* 10 MHz / (2 * CLKDIV) -> 5 MHz / CLKDIV */
+	return 5000000 / (twi->clkdiv & 0xff);
+}
+
+/**
+ * i2c_init - initialize the i2c bus
+ *	@speed: bus speed (in HZ)
+ *	@slaveaddr: address of device in slave mode (0 - not slave)
+ *
+ *	Slave mode isn't actually implemented.  It'll stay that way until
+ *	we get a real request for it.
+ */
+void i2c_init(int speed, int slaveaddr)
+{
+	uint8_t prescale = ((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F;
+
+	/* Set TWI internal clock as 10MHz */
+	twi->control = prescale;
+
+	/* Set TWI interface clock as specified */
+	i2c_set_bus_speed(speed);
+
+	/* Enable it */
+	twi->control = TWI_ENA | prescale;
+	SSYNC();
+
+	debugi("CONTROL:0x%04x CLKDIV:0x%04x", twi->control, twi->clkdiv);
+
+#if CONFIG_SYS_I2C_SLAVE
+# error I2C slave support not tested/supported
+	/* If they want us as a slave, do it */
+	if (slaveaddr) {
+		twi->slave_addr = slaveaddr;
+		twi->slave_ctl = SEN;
+	}
+#endif
+}
+
+/**
+ * i2c_probe - test if a chip exists at a given i2c address
+ *	@chip: i2c chip addr to search for
+ *	@return: 0 if found, non-0 if not found
+ */
+int i2c_probe(uchar chip)
+{
+	u8 byte;
+	return i2c_read(chip, 0, 0, &byte, 1);
+}
+
+/**
+ * i2c_read - read data from an i2c device
+ *	@chip: i2c chip addr
+ *	@addr: memory (register) address in the chip
+ *	@alen: byte size of address
+ *	@buffer: buffer to store data read from chip
+ *	@len: how many bytes to read
+ *	@return: 0 on success, non-0 on failure
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	return i2c_transfer(chip, addr, alen, buffer, len, (alen ? I2C_M_COMBO : I2C_M_READ));
+}
+
+/**
+ * i2c_write - write data to an i2c device
+ *	@chip: i2c chip addr
+ *	@addr: memory (register) address in the chip
+ *	@alen: byte size of address
+ *	@buffer: buffer holding data to write to chip
+ *	@len: how many bytes to write
+ *	@return: 0 on success, non-0 on failure
+ */
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	return i2c_transfer(chip, addr, alen, buffer, len, 0);
+}
+
+/**
+ * i2c_set_bus_num - change active I2C bus
+ *	@bus: bus index, zero based
+ *	@returns: 0 on success, non-0 on failure
+ */
+int i2c_set_bus_num(unsigned int bus)
+{
+	switch (bus) {
+#if CONFIG_SYS_MAX_I2C_BUS > 0
+		case 0: twi = (void *)TWI0_CLKDIV; return 0;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 1
+		case 1: twi = (void *)TWI1_CLKDIV; return 0;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 2
+		case 2: twi = (void *)TWI2_CLKDIV; return 0;
+#endif
+		default: return -1;
+	}
+}
+
+/**
+ * i2c_get_bus_num - returns index of active I2C bus
+ */
+unsigned int i2c_get_bus_num(void)
+{
+	switch ((unsigned long)twi) {
+#if CONFIG_SYS_MAX_I2C_BUS > 0
+		case TWI0_CLKDIV: return 0;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 1
+		case TWI1_CLKDIV: return 1;
+#endif
+#if CONFIG_SYS_MAX_I2C_BUS > 2
+		case TWI2_CLKDIV: return 2;
+#endif
+		default: return -1;
+	}
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/davinci_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/davinci_i2c.c
new file mode 100644
index 000000000..eee1cbd25
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/davinci_i2c.c
@@ -0,0 +1,329 @@
+/*
+ * TI DaVinci (TMS320DM644x) I2C driver.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * --------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/i2c_defs.h>
+
+#define CHECK_NACK() \
+	do {\
+		if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\
+			REG(I2C_CON) = 0;\
+			return(1);\
+		}\
+	} while (0)
+
+
+static int wait_for_bus(void)
+{
+	int	stat, timeout;
+
+	REG(I2C_STAT) = 0xffff;
+
+	for (timeout = 0; timeout < 10; timeout++) {
+		if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) {
+			REG(I2C_STAT) = 0xffff;
+			return(0);
+		}
+
+		REG(I2C_STAT) = stat;
+		udelay(50000);
+	}
+
+	REG(I2C_STAT) = 0xffff;
+	return(1);
+}
+
+
+static int poll_i2c_irq(int mask)
+{
+	int	stat, timeout;
+
+	for (timeout = 0; timeout < 10; timeout++) {
+		udelay(1000);
+		stat = REG(I2C_STAT);
+		if (stat & mask) {
+			return(stat);
+		}
+	}
+
+	REG(I2C_STAT) = 0xffff;
+	return(stat | I2C_TIMEOUT);
+}
+
+
+void flush_rx(void)
+{
+	int	dummy;
+
+	while (1) {
+		if (!(REG(I2C_STAT) & I2C_STAT_RRDY))
+			break;
+
+		dummy = REG(I2C_DRR);
+		REG(I2C_STAT) = I2C_STAT_RRDY;
+		udelay(1000);
+	}
+}
+
+
+void i2c_init(int speed, int slaveadd)
+{
+	u_int32_t	div, psc;
+
+	if (REG(I2C_CON) & I2C_CON_EN) {
+		REG(I2C_CON) = 0;
+		udelay (50000);
+	}
+
+	psc = 2;
+	div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10;	/* SCLL + SCLH */
+	REG(I2C_PSC) = psc;			/* 27MHz / (2 + 1) = 9MHz */
+	REG(I2C_SCLL) = (div * 50) / 100;	/* 50% Duty */
+	REG(I2C_SCLH) = div - REG(I2C_SCLL);
+
+	REG(I2C_OA) = slaveadd;
+	REG(I2C_CNT) = 0;
+
+	/* Interrupts must be enabled or I2C module won't work */
+	REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |
+		I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE;
+
+	/* Now enable I2C controller (get it out of reset) */
+	REG(I2C_CON) = I2C_CON_EN;
+
+	udelay(1000);
+}
+
+
+int i2c_probe(u_int8_t chip)
+{
+	int	rc = 1;
+
+	if (chip == REG(I2C_OA)) {
+		return(rc);
+	}
+
+	REG(I2C_CON) = 0;
+	if (wait_for_bus()) {return(1);}
+
+	/* try to read one byte from current (or only) address */
+	REG(I2C_CNT) = 1;
+	REG(I2C_SA) = chip;
+	REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP);
+	udelay (50000);
+
+	if (!(REG(I2C_STAT) & I2C_STAT_NACK)) {
+		rc = 0;
+		flush_rx();
+		REG(I2C_STAT) = 0xffff;
+	} else {
+		REG(I2C_STAT) = 0xffff;
+		REG(I2C_CON) |= I2C_CON_STP;
+		udelay(20000);
+		if (wait_for_bus()) {return(1);}
+	}
+
+	flush_rx();
+	REG(I2C_STAT) = 0xffff;
+	REG(I2C_CNT) = 0;
+	return(rc);
+}
+
+
+int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
+{
+	u_int32_t	tmp;
+	int		i;
+
+	if ((alen < 0) || (alen > 2)) {
+		printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
+		return(1);
+	}
+
+	if (wait_for_bus()) {return(1);}
+
+	if (alen != 0) {
+		/* Start address phase */
+		tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX;
+		REG(I2C_CNT) = alen;
+		REG(I2C_SA) = chip;
+		REG(I2C_CON) = tmp;
+
+		tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+		CHECK_NACK();
+
+		switch (alen) {
+			case 2:
+				/* Send address MSByte */
+				if (tmp & I2C_STAT_XRDY) {
+					REG(I2C_DXR) = (addr >> 8) & 0xff;
+				} else {
+					REG(I2C_CON) = 0;
+					return(1);
+				}
+
+				tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+				CHECK_NACK();
+				/* No break, fall through */
+			case 1:
+				/* Send address LSByte */
+				if (tmp & I2C_STAT_XRDY) {
+					REG(I2C_DXR) = addr & 0xff;
+				} else {
+					REG(I2C_CON) = 0;
+					return(1);
+				}
+
+				tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY);
+
+				CHECK_NACK();
+
+				if (!(tmp & I2C_STAT_ARDY)) {
+					REG(I2C_CON) = 0;
+					return(1);
+				}
+		}
+	}
+
+	/* Address phase is over, now read 'len' bytes and stop */
+	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP;
+	REG(I2C_CNT) = len & 0xffff;
+	REG(I2C_SA) = chip;
+	REG(I2C_CON) = tmp;
+
+	for (i = 0; i < len; i++) {
+		tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR);
+
+		CHECK_NACK();
+
+		if (tmp & I2C_STAT_RRDY) {
+			buf[i] = REG(I2C_DRR);
+		} else {
+			REG(I2C_CON) = 0;
+			return(1);
+		}
+	}
+
+	tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
+
+	CHECK_NACK();
+
+	if (!(tmp & I2C_STAT_SCD)) {
+		REG(I2C_CON) = 0;
+		return(1);
+	}
+
+	flush_rx();
+	REG(I2C_STAT) = 0xffff;
+	REG(I2C_CNT) = 0;
+	REG(I2C_CON) = 0;
+
+	return(0);
+}
+
+
+int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
+{
+	u_int32_t	tmp;
+	int		i;
+
+	if ((alen < 0) || (alen > 2)) {
+		printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
+		return(1);
+	}
+	if (len < 0) {
+		printf("%s(): bogus length %x\n", __FUNCTION__, len);
+		return(1);
+	}
+
+	if (wait_for_bus()) {return(1);}
+
+	/* Start address phase */
+	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP;
+	REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen;
+	REG(I2C_SA) = chip;
+	REG(I2C_CON) = tmp;
+
+	switch (alen) {
+		case 2:
+			/* Send address MSByte */
+			tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+			CHECK_NACK();
+
+			if (tmp & I2C_STAT_XRDY) {
+				REG(I2C_DXR) = (addr >> 8) & 0xff;
+			} else {
+				REG(I2C_CON) = 0;
+				return(1);
+			}
+			/* No break, fall through */
+		case 1:
+			/* Send address LSByte */
+			tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+			CHECK_NACK();
+
+			if (tmp & I2C_STAT_XRDY) {
+				REG(I2C_DXR) = addr & 0xff;
+			} else {
+				REG(I2C_CON) = 0;
+				return(1);
+			}
+	}
+
+	for (i = 0; i < len; i++) {
+		tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+		CHECK_NACK();
+
+		if (tmp & I2C_STAT_XRDY) {
+			REG(I2C_DXR) = buf[i];
+		} else {
+			return(1);
+		}
+	}
+
+	tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
+
+	CHECK_NACK();
+
+	if (!(tmp & I2C_STAT_SCD)) {
+		REG(I2C_CON) = 0;
+		return(1);
+	}
+
+	flush_rx();
+	REG(I2C_STAT) = 0xffff;
+	REG(I2C_CNT) = 0;
+	REG(I2C_CON) = 0;
+
+	return(0);
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/fsl_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/fsl_i2c.c
new file mode 100644
index 000000000..cb13deeea
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/fsl_i2c.c
@@ -0,0 +1,492 @@
+/*
+ * Copyright 2006,2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_HARD_I2C
+
+#include <command.h>
+#include <i2c.h>		/* Functional interface */
+
+#include <asm/io.h>
+#include <asm/fsl_i2c.h>	/* HW definitions */
+
+/* The maximum number of microseconds we will wait until another master has
+ * released the bus.  If not defined in the board header file, then use a
+ * generic value.
+ */
+#ifndef CONFIG_I2C_MBB_TIMEOUT
+#define CONFIG_I2C_MBB_TIMEOUT	100000
+#endif
+
+/* The maximum number of microseconds we will wait for a read or write
+ * operation to complete.  If not defined in the board header file, then use a
+ * generic value.
+ */
+#ifndef CONFIG_I2C_TIMEOUT
+#define CONFIG_I2C_TIMEOUT	10000
+#endif
+
+#define I2C_READ_BIT  1
+#define I2C_WRITE_BIT 0
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
+ * Default is bus 0.  This is necessary because the DDR initialization
+ * runs from ROM, and we can't switch buses because we can't modify
+ * the global variables.
+ */
+#ifndef CONFIG_SYS_SPD_BUS_NUM
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#endif
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
+#if defined(CONFIG_I2C_MUX)
+static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;
+#endif
+
+static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
+
+static const struct fsl_i2c *i2c_dev[2] = {
+	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET),
+#ifdef CONFIG_SYS_I2C2_OFFSET
+	(struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET)
+#endif
+};
+
+/* I2C speed map for a DFSR value of 1 */
+
+/*
+ * Map I2C frequency dividers to FDR and DFSR values
+ *
+ * This structure is used to define the elements of a table that maps I2C
+ * frequency divider (I2C clock rate divided by I2C bus speed) to a value to be
+ * programmed into the Frequency Divider Ratio (FDR) and Digital Filter
+ * Sampling Rate (DFSR) registers.
+ *
+ * The actual table should be defined in the board file, and it must be called
+ * fsl_i2c_speed_map[].
+ *
+ * The last entry of the table must have a value of {-1, X}, where X is same
+ * FDR/DFSR values as the second-to-last entry.  This guarantees that any
+ * search through the array will always find a match.
+ *
+ * The values of the divider must be in increasing numerical order, i.e.
+ * fsl_i2c_speed_map[x+1].divider > fsl_i2c_speed_map[x].divider.
+ *
+ * For this table, the values are based on a value of 1 for the DFSR
+ * register.  See the application note AN2919 "Determining the I2C Frequency
+ * Divider Ratio for SCL"
+ *
+ * ColdFire I2C frequency dividers for FDR values are different from
+ * PowerPC. The protocol to use the I2C module is still the same.
+ * A different table is defined and are based on MCF5xxx user manual.
+ *
+ */
+static const struct {
+	unsigned short divider;
+	u8 fdr;
+} fsl_i2c_speed_map[] = {
+#ifdef __M68K__
+	{20, 32}, {22, 33}, {24, 34}, {26, 35},
+	{28, 0}, {28, 36}, {30, 1}, {32, 37},
+	{34, 2}, {36, 38}, {40, 3}, {40, 39},
+	{44, 4}, {48, 5}, {48, 40}, {56, 6},
+	{56, 41}, {64, 42}, {68, 7}, {72, 43},
+	{80, 8}, {80, 44}, {88, 9}, {96, 41},
+	{104, 10}, {112, 42}, {128, 11}, {128, 43},
+	{144, 12}, {160, 13}, {160, 48}, {192, 14},
+	{192, 49}, {224, 50}, {240, 15}, {256, 51},
+	{288, 16}, {320, 17}, {320, 52}, {384, 18},
+	{384, 53}, {448, 54}, {480, 19}, {512, 55},
+	{576, 20}, {640, 21}, {640, 56}, {768, 22},
+	{768, 57}, {960, 23}, {896, 58}, {1024, 59},
+	{1152, 24}, {1280, 25}, {1280, 60}, {1536, 26},
+	{1536, 61}, {1792, 62}, {1920, 27}, {2048, 63},
+	{2304, 28}, {2560, 29}, {3072, 30}, {3840, 31},
+	{-1, 31}
+#endif
+};
+
+/**
+ * Set the I2C bus speed for a given I2C device
+ *
+ * @param dev: the I2C device
+ * @i2c_clk: I2C bus clock frequency
+ * @speed: the desired speed of the bus
+ *
+ * The I2C device must be stopped before calling this function.
+ *
+ * The return value is the actual bus speed that is set.
+ */
+static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
+	unsigned int i2c_clk, unsigned int speed)
+{
+	unsigned short divider = min(i2c_clk / speed, (unsigned short) -1);
+
+	/*
+	 * We want to choose an FDR/DFSR that generates an I2C bus speed that
+	 * is equal to or lower than the requested speed.  That means that we
+	 * want the first divider that is equal to or greater than the
+	 * calculated divider.
+	 */
+#ifdef __PPC__
+	u8 dfsr, fdr = 0x31; /* Default if no FDR found */
+	/* a, b and dfsr matches identifiers A,B and C respectively in AN2919 */
+	unsigned short a, b, ga, gb;
+	unsigned long c_div, est_div;
+
+#ifdef CONFIG_FSL_I2C_CUSTOM_DFSR
+	dfsr = CONFIG_FSL_I2C_CUSTOM_DFSR;
+#else
+	/* Condition 1: dfsr <= 50/T */
+	dfsr = (5 * (i2c_clk / 1000)) / 100000;
+#endif
+#ifdef CONFIG_FSL_I2C_CUSTOM_FDR
+	fdr = CONFIG_FSL_I2C_CUSTOM_FDR;
+	speed = i2c_clk / divider; /* Fake something */
+#else
+	debug("Requested speed:%d, i2c_clk:%d\n", speed, i2c_clk);
+	if (!dfsr)
+		dfsr = 1;
+
+	est_div = ~0;
+	for (ga = 0x4, a = 10; a <= 30; ga++, a += 2) {
+		for (gb = 0; gb < 8; gb++) {
+			b = 16 << gb;
+			c_div = b * (a + ((3*dfsr)/b)*2);
+			if ((c_div > divider) && (c_div < est_div)) {
+				unsigned short bin_gb, bin_ga;
+
+				est_div = c_div;
+				bin_gb = gb << 2;
+				bin_ga = (ga & 0x3) | ((ga & 0x4) << 3);
+				fdr = bin_gb | bin_ga;
+				speed = i2c_clk / est_div;
+				debug("FDR:0x%.2x, div:%ld, ga:0x%x, gb:0x%x, "
+				      "a:%d, b:%d, speed:%d\n",
+				      fdr, est_div, ga, gb, a, b, speed);
+				/* Condition 2 not accounted for */
+				debug("Tr <= %d ns\n",
+				      (b - 3 * dfsr) * 1000000 /
+				      (i2c_clk / 1000));
+			}
+		}
+		if (a == 20)
+			a += 2;
+		if (a == 24)
+			a += 4;
+	}
+	debug("divider:%d, est_div:%ld, DFSR:%d\n", divider, est_div, dfsr);
+	debug("FDR:0x%.2x, speed:%d\n", fdr, speed);
+#endif
+	writeb(dfsr, &dev->dfsrr);	/* set default filter */
+	writeb(fdr, &dev->fdr);		/* set bus speed */
+#else
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++)
+		if (fsl_i2c_speed_map[i].divider >= divider) {
+			u8 fdr;
+
+			fdr = fsl_i2c_speed_map[i].fdr;
+			speed = i2c_clk / fsl_i2c_speed_map[i].divider;
+			writeb(fdr, &dev->fdr);		/* set bus speed */
+
+			break;
+		}
+#endif
+	return speed;
+}
+
+void
+i2c_init(int speed, int slaveadd)
+{
+	struct fsl_i2c *dev;
+	unsigned int temp;
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+	/* Call board specific i2c bus reset routine before accessing the
+	 * environment, which might be in a chip on that bus. For details
+	 * about this problem see doc/I2C_Edge_Conditions.
+	*/
+	i2c_init_board();
+#endif
+	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
+
+	writeb(0, &dev->cr);			/* stop I2C controller */
+	udelay(5);				/* let it shutdown in peace */
+	temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
+	if (gd->flags & GD_FLG_RELOC)
+		i2c_bus_speed[0] = temp;
+	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
+	writeb(0x0, &dev->sr);			/* clear status register */
+	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
+
+#ifdef	CONFIG_SYS_I2C2_OFFSET
+	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C2_OFFSET);
+
+	writeb(0, &dev->cr);			/* stop I2C controller */
+	udelay(5);				/* let it shutdown in peace */
+	temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
+	if (gd->flags & GD_FLG_RELOC)
+		i2c_bus_speed[1] = temp;
+	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
+	writeb(0x0, &dev->sr);			/* clear status register */
+	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
+#endif
+
+#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
+	/* Call board specific i2c bus reset routine AFTER the bus has been
+	 * initialized. Use either this callpoint or i2c_init_board;
+	 * which is called before i2c_init operations.
+	 * For details about this problem see doc/I2C_Edge_Conditions.
+	*/
+	i2c_board_late_init();
+#endif
+}
+
+static int
+i2c_wait4bus(void)
+{
+	unsigned long long timeval = get_ticks();
+	const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT);
+
+	while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
+		if ((get_ticks() - timeval) > timeout)
+			return -1;
+	}
+
+	return 0;
+}
+
+static __inline__ int
+i2c_wait(int write)
+{
+	u32 csr;
+	unsigned long long timeval = get_ticks();
+	const unsigned long long timeout = usec2ticks(CONFIG_I2C_TIMEOUT);
+
+	do {
+		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+		if (!(csr & I2C_SR_MIF))
+			continue;
+		/* Read again to allow register to stabilise */
+		csr = readb(&i2c_dev[i2c_bus_num]->sr);
+
+		writeb(0x0, &i2c_dev[i2c_bus_num]->sr);
+
+		if (csr & I2C_SR_MAL) {
+			debug("i2c_wait: MAL\n");
+			return -1;
+		}
+
+		if (!(csr & I2C_SR_MCF))	{
+			debug("i2c_wait: unfinished\n");
+			return -1;
+		}
+
+		if (write == I2C_WRITE_BIT && (csr & I2C_SR_RXAK)) {
+			debug("i2c_wait: No RXACK\n");
+			return -1;
+		}
+
+		return 0;
+	} while ((get_ticks() - timeval) < timeout);
+
+	debug("i2c_wait: timed out\n");
+	return -1;
+}
+
+static __inline__ int
+i2c_write_addr (u8 dev, u8 dir, int rsta)
+{
+	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX
+	       | (rsta ? I2C_CR_RSTA : 0),
+	       &i2c_dev[i2c_bus_num]->cr);
+
+	writeb((dev << 1) | dir, &i2c_dev[i2c_bus_num]->dr);
+
+	if (i2c_wait(I2C_WRITE_BIT) < 0)
+		return 0;
+
+	return 1;
+}
+
+static __inline__ int
+__i2c_write(u8 *data, int length)
+{
+	int i;
+
+	for (i = 0; i < length; i++) {
+		writeb(data[i], &i2c_dev[i2c_bus_num]->dr);
+
+		if (i2c_wait(I2C_WRITE_BIT) < 0)
+			break;
+	}
+
+	return i;
+}
+
+static __inline__ int
+__i2c_read(u8 *data, int length)
+{
+	int i;
+
+	writeb(I2C_CR_MEN | I2C_CR_MSTA | ((length == 1) ? I2C_CR_TXAK : 0),
+	       &i2c_dev[i2c_bus_num]->cr);
+
+	/* dummy read */
+	readb(&i2c_dev[i2c_bus_num]->dr);
+
+	for (i = 0; i < length; i++) {
+		if (i2c_wait(I2C_READ_BIT) < 0)
+			break;
+
+		/* Generate ack on last next to last byte */
+		if (i == length - 2)
+			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK,
+			       &i2c_dev[i2c_bus_num]->cr);
+
+		/* Do not generate stop on last byte */
+		if (i == length - 1)
+			writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
+			       &i2c_dev[i2c_bus_num]->cr);
+
+		data[i] = readb(&i2c_dev[i2c_bus_num]->dr);
+	}
+
+	return i;
+}
+
+int
+i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	int i = -1; /* signal error */
+	u8 *a = (u8*)&addr;
+
+	if (i2c_wait4bus() >= 0
+	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
+	    && __i2c_write(&a[4 - alen], alen) == alen)
+		i = 0; /* No error so far */
+
+	if (length
+	    && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0)
+		i = __i2c_read(data, length);
+
+	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+
+	if (i2c_wait4bus()) /* Wait until STOP */
+		debug("i2c_read: wait4bus timed out\n");
+
+	if (i == length)
+	    return 0;
+
+	return -1;
+}
+
+int
+i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	int i = -1; /* signal error */
+	u8 *a = (u8*)&addr;
+
+	if (i2c_wait4bus() >= 0
+	    && i2c_write_addr(dev, I2C_WRITE_BIT, 0) != 0
+	    && __i2c_write(&a[4 - alen], alen) == alen) {
+		i = __i2c_write(data, length);
+	}
+
+	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);
+	if (i2c_wait4bus()) /* Wait until STOP */
+		debug("i2c_write: wait4bus timed out\n");
+
+	if (i == length)
+	    return 0;
+
+	return -1;
+}
+
+int
+i2c_probe(uchar chip)
+{
+	/* For unknow reason the controller will ACK when
+	 * probing for a slave with the same address, so skip
+	 * it.
+	 */
+	if (chip == (readb(&i2c_dev[i2c_bus_num]->adr) >> 1))
+		return -1;
+
+	return i2c_read(chip, 0, 0, NULL, 0);
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+		i2c_bus_num = bus;
+	} else {
+		int	ret;
+
+		ret = i2x_mux_select_mux(bus);
+		if (ret)
+			return ret;
+		i2c_bus_num = 0;
+	}
+	i2c_bus_num_mux = bus;
+#else
+#ifdef CONFIG_SYS_I2C2_OFFSET
+	if (bus > 1) {
+#else
+	if (bus > 0) {
+#endif
+		return -1;
+	}
+
+	i2c_bus_num = bus;
+#endif
+	return 0;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+	unsigned int i2c_clk = (i2c_bus_num == 1) ? gd->i2c2_clk : gd->i2c1_clk;
+
+	writeb(0, &i2c_dev[i2c_bus_num]->cr);		/* stop controller */
+	i2c_bus_speed[i2c_bus_num] =
+		set_i2c_bus_speed(i2c_dev[i2c_bus_num], i2c_clk, speed);
+	writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr);	/* start controller */
+
+	return 0;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+#if defined(CONFIG_I2C_MUX)
+	return i2c_bus_num_mux;
+#else
+	return i2c_bus_num;
+#endif
+}
+
+unsigned int i2c_get_bus_speed(void)
+{
+	return i2c_bus_speed[i2c_bus_num];
+}
+
+#endif /* CONFIG_HARD_I2C */
diff --git a/roms/u-boot-sam460ex/drivers/i2c/kirkwood_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/kirkwood_i2c.c
new file mode 100644
index 000000000..a4409be11
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/kirkwood_i2c.c
@@ -0,0 +1,496 @@
+/*
+ * Driver for the i2c controller on the Marvell line of host bridges
+ * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, Orion SoC family),
+ * and Kirkwood family.
+ *
+ * Based on:
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ * 2005 (c) MontaVista, Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * ported from Linux to u-boot
+ * (C) Copyright 2009
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ */
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
+#if defined(CONFIG_I2C_MUX)
+static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;
+#endif
+
+/* Register defines */
+#define	KW_I2C_REG_SLAVE_ADDR			0x00
+#define	KW_I2C_REG_DATA				0x04
+#define	KW_I2C_REG_CONTROL			0x08
+#define	KW_I2C_REG_STATUS			0x0c
+#define	KW_I2C_REG_BAUD				0x0c
+#define	KW_I2C_REG_EXT_SLAVE_ADDR		0x10
+#define	KW_I2C_REG_SOFT_RESET			0x1c
+
+#define	KW_I2C_REG_CONTROL_ACK			0x00000004
+#define	KW_I2C_REG_CONTROL_IFLG			0x00000008
+#define	KW_I2C_REG_CONTROL_STOP			0x00000010
+#define	KW_I2C_REG_CONTROL_START		0x00000020
+#define	KW_I2C_REG_CONTROL_TWSIEN		0x00000040
+#define	KW_I2C_REG_CONTROL_INTEN		0x00000080
+
+/* Ctlr status values */
+#define	KW_I2C_STATUS_BUS_ERR			0x00
+#define	KW_I2C_STATUS_MAST_START		0x08
+#define	KW_I2C_STATUS_MAST_REPEAT_START		0x10
+#define	KW_I2C_STATUS_MAST_WR_ADDR_ACK		0x18
+#define	KW_I2C_STATUS_MAST_WR_ADDR_NO_ACK	0x20
+#define	KW_I2C_STATUS_MAST_WR_ACK		0x28
+#define	KW_I2C_STATUS_MAST_WR_NO_ACK		0x30
+#define	KW_I2C_STATUS_MAST_LOST_ARB		0x38
+#define	KW_I2C_STATUS_MAST_RD_ADDR_ACK		0x40
+#define	KW_I2C_STATUS_MAST_RD_ADDR_NO_ACK	0x48
+#define	KW_I2C_STATUS_MAST_RD_DATA_ACK		0x50
+#define	KW_I2C_STATUS_MAST_RD_DATA_NO_ACK	0x58
+#define	KW_I2C_STATUS_MAST_WR_ADDR_2_ACK	0xd0
+#define	KW_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK	0xd8
+#define	KW_I2C_STATUS_MAST_RD_ADDR_2_ACK	0xe0
+#define	KW_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK	0xe8
+#define	KW_I2C_STATUS_NO_STATUS			0xf8
+
+/* Driver states */
+enum {
+	KW_I2C_STATE_INVALID,
+	KW_I2C_STATE_IDLE,
+	KW_I2C_STATE_WAITING_FOR_START_COND,
+	KW_I2C_STATE_WAITING_FOR_ADDR_1_ACK,
+	KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK,
+	KW_I2C_STATE_WAITING_FOR_SLAVE_ACK,
+	KW_I2C_STATE_WAITING_FOR_SLAVE_DATA,
+};
+
+/* Driver actions */
+enum {
+	KW_I2C_ACTION_INVALID,
+	KW_I2C_ACTION_CONTINUE,
+	KW_I2C_ACTION_SEND_START,
+	KW_I2C_ACTION_SEND_ADDR_1,
+	KW_I2C_ACTION_SEND_ADDR_2,
+	KW_I2C_ACTION_SEND_DATA,
+	KW_I2C_ACTION_RCV_DATA,
+	KW_I2C_ACTION_RCV_DATA_STOP,
+	KW_I2C_ACTION_SEND_STOP,
+};
+
+/* defines to get compatible with Linux driver */
+#define IRQ_NONE	0x0
+#define IRQ_HANDLED	0x01
+
+#define I2C_M_TEN	0x01
+#define I2C_M_RD	0x02
+#define	I2C_M_REV_DIR_ADDR	0x04;
+
+struct i2c_msg {
+	u32	addr;
+	u32	flags;
+	u8	*buf;
+	u32	len;
+};
+
+struct kirkwood_i2c_data {
+	int			irq;
+	u32			state;
+	u32			action;
+	u32			aborting;
+	u32			cntl_bits;
+	void			*reg_base;
+	u32			reg_base_p;
+	u32			reg_size;
+	u32			addr1;
+	u32			addr2;
+	u32			bytes_left;
+	u32			byte_posn;
+	u32			block;
+	int			rc;
+	u32			freq_m;
+	u32			freq_n;
+	struct i2c_msg		*msg;
+};
+
+static struct kirkwood_i2c_data __drv_data __attribute__ ((section (".data")));
+static struct kirkwood_i2c_data *drv_data = &__drv_data;
+static struct i2c_msg __i2c_msg __attribute__ ((section (".data")));
+static struct i2c_msg *kirkwood_i2c_msg = &__i2c_msg;
+
+/*
+ *****************************************************************************
+ *
+ *	Finite State Machine & Interrupt Routines
+ *
+ *****************************************************************************
+ */
+
+static inline int abs(int n)
+{
+	 if(n >= 0)
+		return n;
+	else
+		return n * -1;
+}
+
+static void kirkwood_calculate_speed(int speed)
+{
+	int	calcspeed;
+	int	diff;
+	int	best_diff = CONFIG_SYS_TCLK;
+	int	best_speed = 0;
+	int	m, n;
+	int	tmp[8] = {2, 4, 8, 16, 32, 64, 128, 256};
+
+	for (n = 0; n < 8; n++) {
+		for (m = 0; m < 16; m++) {
+			calcspeed = CONFIG_SYS_TCLK / (10 * (m + 1) * tmp[n]);
+			diff = abs((speed - calcspeed));
+			if ( diff < best_diff) {
+				best_diff = diff;
+				best_speed = calcspeed;
+				drv_data->freq_m = m;
+				drv_data->freq_n = n;
+			}
+		}
+	}
+}
+
+/* Reset hardware and initialize FSM */
+static void
+kirkwood_i2c_hw_init(int speed, int slaveadd)
+{
+	drv_data->state = KW_I2C_STATE_IDLE;
+
+	kirkwood_calculate_speed(speed);
+	writel(0, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_SOFT_RESET);
+	writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
+		CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_BAUD);
+	writel(slaveadd, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_SLAVE_ADDR);
+	writel(0, CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_EXT_SLAVE_ADDR);
+	writel(KW_I2C_REG_CONTROL_TWSIEN | KW_I2C_REG_CONTROL_STOP,
+		CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+}
+
+static void
+kirkwood_i2c_fsm(u32 status)
+{
+	/*
+	 * If state is idle, then this is likely the remnants of an old
+	 * operation that driver has given up on or the user has killed.
+	 * If so, issue the stop condition and go to idle.
+	 */
+	if (drv_data->state == KW_I2C_STATE_IDLE) {
+		drv_data->action = KW_I2C_ACTION_SEND_STOP;
+		return;
+	}
+
+	/* The status from the ctlr [mostly] tells us what to do next */
+	switch (status) {
+	/* Start condition interrupt */
+	case KW_I2C_STATUS_MAST_START: /* 0x08 */
+	case KW_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */
+		drv_data->action = KW_I2C_ACTION_SEND_ADDR_1;
+		drv_data->state = KW_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
+		break;
+
+	/* Performing a write */
+	case KW_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = KW_I2C_ACTION_SEND_ADDR_2;
+			drv_data->state =
+				KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case KW_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
+	case KW_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
+		if ((drv_data->bytes_left == 0)
+				|| (drv_data->aborting
+					&& (drv_data->byte_posn != 0))) {
+			drv_data->action = KW_I2C_ACTION_SEND_STOP;
+			drv_data->state = KW_I2C_STATE_IDLE;
+		} else {
+			drv_data->action = KW_I2C_ACTION_SEND_DATA;
+			drv_data->state =
+				KW_I2C_STATE_WAITING_FOR_SLAVE_ACK;
+			drv_data->bytes_left--;
+		}
+		break;
+
+	/* Performing a read */
+	case KW_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = KW_I2C_ACTION_SEND_ADDR_2;
+			drv_data->state =
+				KW_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case KW_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
+		if (drv_data->bytes_left == 0) {
+			drv_data->action = KW_I2C_ACTION_SEND_STOP;
+			drv_data->state = KW_I2C_STATE_IDLE;
+			break;
+		}
+		/* FALLTHRU */
+	case KW_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
+		if (status != KW_I2C_STATUS_MAST_RD_DATA_ACK)
+			drv_data->action = KW_I2C_ACTION_CONTINUE;
+		else {
+			drv_data->action = KW_I2C_ACTION_RCV_DATA;
+			drv_data->bytes_left--;
+		}
+		drv_data->state = KW_I2C_STATE_WAITING_FOR_SLAVE_DATA;
+
+		if ((drv_data->bytes_left == 1) || drv_data->aborting)
+			drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_ACK;
+		break;
+
+	case KW_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
+		drv_data->action = KW_I2C_ACTION_RCV_DATA_STOP;
+		drv_data->state = KW_I2C_STATE_IDLE;
+		break;
+
+	case KW_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
+	case KW_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */
+	case KW_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
+		/* Doesn't seem to be a device at other end */
+		drv_data->action = KW_I2C_ACTION_SEND_STOP;
+		drv_data->state = KW_I2C_STATE_IDLE;
+		drv_data->rc = -ENODEV;
+		break;
+
+	default:
+		printf("kirkwood_i2c_fsm: Ctlr Error -- state: 0x%x, "
+			"status: 0x%x, addr: 0x%x, flags: 0x%x\n",
+			 drv_data->state, status, drv_data->msg->addr,
+			 drv_data->msg->flags);
+		drv_data->action = KW_I2C_ACTION_SEND_STOP;
+		kirkwood_i2c_hw_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+		drv_data->rc = -EIO;
+	}
+}
+
+static void
+kirkwood_i2c_do_action(void)
+{
+	switch(drv_data->action) {
+	case KW_I2C_ACTION_CONTINUE:
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_SEND_START:
+		writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_START,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_SEND_ADDR_1:
+		writel(drv_data->addr1,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_SEND_ADDR_2:
+		writel(drv_data->addr2,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_SEND_DATA:
+		writel(drv_data->msg->buf[drv_data->byte_posn++],
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_RCV_DATA:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		writel(drv_data->cntl_bits,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		break;
+
+	case KW_I2C_ACTION_RCV_DATA_STOP:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_DATA);
+		drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_INTEN;
+		writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_STOP,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		drv_data->block = 0;
+		break;
+
+	case KW_I2C_ACTION_INVALID:
+	default:
+		printf("kirkwood_i2c_do_action: Invalid action: %d\n",
+			drv_data->action);
+		drv_data->rc = -EIO;
+		/* FALLTHRU */
+	case KW_I2C_ACTION_SEND_STOP:
+		drv_data->cntl_bits &= ~KW_I2C_REG_CONTROL_INTEN;
+		writel(drv_data->cntl_bits | KW_I2C_REG_CONTROL_STOP,
+			CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		drv_data->block = 0;
+		break;
+	}
+}
+
+static	int
+kirkwood_i2c_intr(void)
+{
+	u32		status;
+	u32		ctrl;
+	int		rc = IRQ_NONE;
+
+	ctrl = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+	while ((ctrl & KW_I2C_REG_CONTROL_IFLG) &&
+		(drv_data->rc == 0)) {
+		status = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_STATUS);
+		kirkwood_i2c_fsm(status);
+		kirkwood_i2c_do_action();
+		rc = IRQ_HANDLED;
+		ctrl = readl(CONFIG_I2C_KW_REG_BASE + KW_I2C_REG_CONTROL);
+		udelay(1000);
+	}
+	return rc;
+}
+
+static void
+kirkwood_i2c_doio(struct i2c_msg *msg)
+{
+	int	ret;
+
+	while ((drv_data->rc == 0) && (drv_data->state != KW_I2C_STATE_IDLE)) {
+		/* poll Status register */
+		ret = kirkwood_i2c_intr();
+		if (ret == IRQ_NONE)
+			udelay(10);
+	}
+}
+
+static void
+kirkwood_i2c_prepare_for_io(struct i2c_msg *msg)
+{
+	u32	dir = 0;
+
+	drv_data->msg = msg;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = msg->len;
+	drv_data->aborting = 0;
+	drv_data->rc = 0;
+	/* in u-boot we use no IRQs */
+	drv_data->cntl_bits = KW_I2C_REG_CONTROL_ACK | KW_I2C_REG_CONTROL_TWSIEN;
+
+	if (msg->flags & I2C_M_RD)
+		dir = 1;
+	if (msg->flags & I2C_M_TEN) {
+		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
+		drv_data->addr2 = (u32)msg->addr & 0xff;
+	} else {
+		drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir;
+		drv_data->addr2 = 0;
+	}
+	/* OK, no start it (from kirkwood_i2c_execute_msg())*/
+	drv_data->action = KW_I2C_ACTION_SEND_START;
+	drv_data->state = KW_I2C_STATE_WAITING_FOR_START_COND;
+	drv_data->block = 1;
+	kirkwood_i2c_do_action();
+}
+
+void
+i2c_init(int speed, int slaveadd)
+{
+	kirkwood_i2c_hw_init(speed, slaveadd);
+}
+
+int
+i2c_read(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	kirkwood_i2c_msg->buf = data;
+	kirkwood_i2c_msg->len = length;
+	kirkwood_i2c_msg->addr = dev;
+	kirkwood_i2c_msg->flags = I2C_M_RD;
+
+	kirkwood_i2c_prepare_for_io(kirkwood_i2c_msg);
+	kirkwood_i2c_doio(kirkwood_i2c_msg);
+	return drv_data->rc;
+}
+
+int
+i2c_write(u8 dev, uint addr, int alen, u8 *data, int length)
+{
+	kirkwood_i2c_msg->buf = data;
+	kirkwood_i2c_msg->len = length;
+	kirkwood_i2c_msg->addr = dev;
+	kirkwood_i2c_msg->flags = 0;
+
+	kirkwood_i2c_prepare_for_io(kirkwood_i2c_msg);
+	kirkwood_i2c_doio(kirkwood_i2c_msg);
+	return drv_data->rc;
+}
+
+int
+i2c_probe(uchar chip)
+{
+	return i2c_read(chip, 0, 0, NULL, 0);
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+		i2c_bus_num = bus;
+	} else {
+		int	ret;
+
+		ret = i2x_mux_select_mux(bus);
+		if (ret)
+			return ret;
+		i2c_bus_num = 0;
+	}
+	i2c_bus_num_mux = bus;
+#else
+	if (bus > 0) {
+		return -1;
+	}
+
+	i2c_bus_num = bus;
+#endif
+	return 0;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+#if defined(CONFIG_I2C_MUX)
+	return i2c_bus_num_mux;
+#else
+	return i2c_bus_num;
+#endif
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/mxc_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/mxc_i2c.c
new file mode 100644
index 000000000..8e10fbb21
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/mxc_i2c.c
@@ -0,0 +1,208 @@
+/*
+ * i2c driver for Freescale mx31
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_HARD_I2C)
+
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+#define IADR	0x00
+#define IFDR	0x04
+#define I2CR	0x08
+#define I2SR	0x0c
+#define I2DR	0x10
+
+#define I2CR_IEN	(1 << 7)
+#define I2CR_IIEN	(1 << 6)
+#define I2CR_MSTA	(1 << 5)
+#define I2CR_MTX	(1 << 4)
+#define I2CR_TX_NO_AK	(1 << 3)
+#define I2CR_RSTA	(1 << 2)
+
+#define I2SR_ICF	(1 << 7)
+#define I2SR_IBB	(1 << 5)
+#define I2SR_IIF	(1 << 1)
+#define I2SR_RX_NO_AK	(1 << 0)
+
+#ifdef CONFIG_SYS_I2C_MX31_PORT1
+#define I2C_BASE	0x43f80000
+#define I2C_CLK_OFFSET	26
+#elif defined (CONFIG_SYS_I2C_MX31_PORT2)
+#define I2C_BASE	0x43f98000
+#define I2C_CLK_OFFSET	28
+#elif defined (CONFIG_SYS_I2C_MX31_PORT3)
+#define I2C_BASE	0x43f84000
+#define I2C_CLK_OFFSET	30
+#else
+#error "define CONFIG_SYS_I2C_MX31_PORTx to use the mx31 I2C driver"
+#endif
+
+#ifdef DEBUG
+#define DPRINTF(args...)  printf(args)
+#else
+#define DPRINTF(args...)
+#endif
+
+static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
+	             160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
+	             1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
+
+void i2c_init(int speed, int unused)
+{
+	int freq = mx31_get_ipg_clk();
+	int i;
+
+	/* start the required I2C clock */
+	__REG(CCM_CGR0) = __REG(CCM_CGR0) | (3 << I2C_CLK_OFFSET);
+
+	for (i = 0; i < 0x1f; i++)
+		if (freq / div[i] <= speed)
+			break;
+
+	DPRINTF("%s: speed: %d\n",__FUNCTION__, speed);
+
+	__REG16(I2C_BASE + I2CR) = 0; /* Reset module */
+	__REG16(I2C_BASE + IFDR) = i;
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
+	__REG16(I2C_BASE + I2SR) = 0;
+}
+
+static int wait_busy(void)
+{
+	int timeout = 10000;
+
+	while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout)
+		udelay(1);
+	__REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
+
+	return timeout;
+}
+
+static int tx_byte(u8 byte)
+{
+	__REG16(I2C_BASE + I2DR) = byte;
+
+	if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
+		return -1;
+	return 0;
+}
+
+static int rx_byte(void)
+{
+	if (!wait_busy())
+		return -1;
+
+	return __REG16(I2C_BASE + I2DR);
+}
+
+int i2c_probe(uchar chip)
+{
+	int ret;
+
+	__REG16(I2C_BASE + I2CR) = 0; /* Reset module */
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_MTX;
+	ret = tx_byte(chip << 1);
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX;
+
+	return ret;
+}
+
+static int i2c_addr(uchar chip, uint addr, int alen)
+{
+	__REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_MTX;
+
+	if (tx_byte(chip << 1))
+		return -1;
+
+	while (alen--)
+		if (tx_byte((addr >> (alen * 8)) & 0xff))
+			return -1;
+	return 0;
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	int timeout = 10000;
+	int ret;
+
+	DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len);
+
+	if (i2c_addr(chip, addr, alen)) {
+		printf("i2c_addr failed\n");
+		return -1;
+	}
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_MTX | I2CR_RSTA;
+
+	if (tx_byte(chip << 1 | 1))
+		return -1;
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | ((len == 1) ? I2CR_TX_NO_AK : 0);
+
+	ret = __REG16(I2C_BASE + I2DR);
+
+	while (len--) {
+		if ((ret = rx_byte()) < 0)
+			return -1;
+		*buf++ = ret;
+		if (len <= 1)
+			__REG16(I2C_BASE + I2CR) = I2CR_IEN |  I2CR_MSTA | I2CR_TX_NO_AK;
+	}
+
+	wait_busy();
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+	while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
+		udelay(1);
+
+	return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	int timeout = 10000;
+	DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len);
+
+	if (i2c_addr(chip, addr, alen))
+		return -1;
+
+	while (len--)
+		if (tx_byte(*buf++))
+			return -1;
+
+	__REG16(I2C_BASE + I2CR) = I2CR_IEN;
+
+	while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
+		udelay(1);
+
+	return 0;
+}
+
+#endif /* CONFIG_HARD_I2C */
diff --git a/roms/u-boot-sam460ex/drivers/i2c/omap1510_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/omap1510_i2c.c
new file mode 100644
index 000000000..f91ee8884
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/omap1510_i2c.c
@@ -0,0 +1,277 @@
+/*
+ * Basic I2C functions
+ *
+ * Copyright (c) 2003 Texas Instruments
+ *
+ * This package is free software;  you can redistribute it and/or
+ * modify it under the terms of the license found in the file
+ * named COPYING that should have accompanied this file.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Author: Jian Zhang jzhang@ti.com, Texas Instruments
+ *
+ * Copyright (c) 2003 Wolfgang Denk, wd@denx.de
+ * Rewritten to fit into the current U-Boot framework
+ *
+ */
+
+#include <common.h>
+
+static void wait_for_bb (void);
+static u16 wait_for_pin (void);
+
+void i2c_init (int speed, int slaveadd)
+{
+	u16 scl;
+
+	if (inw (I2C_CON) & I2C_CON_EN) {
+		outw (0, I2C_CON);
+		udelay (5000);
+	}
+
+	/* 12MHz I2C module clock */
+	outw (0, I2C_PSC);
+	outw (I2C_CON_EN, I2C_CON);
+	outw (0, I2C_SYSTEST);
+	/* have to enable intrrupts or OMAP i2c module doesn't work */
+	outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
+	      I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE);
+	scl = (12000000 / 2) / speed - 6;
+	outw (scl, I2C_SCLL);
+	outw (scl, I2C_SCLH);
+	/* own address */
+	outw (slaveadd, I2C_OA);
+	outw (0, I2C_CNT);
+	udelay (1000);
+}
+
+static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
+{
+	int i2c_error = 0;
+	u16 status;
+
+	/* wait until bus not busy */
+	wait_for_bb ();
+
+	/* one byte only */
+	outw (1, I2C_CNT);
+	/* set slave address */
+	outw (devaddr, I2C_SA);
+	/* no stop bit needed here */
+	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON);
+
+	status = wait_for_pin ();
+
+	if (status & I2C_STAT_XRDY) {
+		/* Important: have to use byte access */
+		*(volatile u8 *) (I2C_DATA) = regoffset;
+		udelay (20000);
+		if (inw (I2C_STAT) & I2C_STAT_NACK) {
+			i2c_error = 1;
+		}
+	} else {
+		i2c_error = 1;
+	}
+
+	if (!i2c_error) {
+		/* free bus, otherwise we can't use a combined transction */
+		outw (0, I2C_CON);
+		while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) {
+			udelay (10000);
+			/* Have to clear pending interrupt to clear I2C_STAT */
+			inw (I2C_IV);
+		}
+
+		wait_for_bb ();
+		/* set slave address */
+		outw (devaddr, I2C_SA);
+		/* read one byte from slave */
+		outw (1, I2C_CNT);
+		/* need stop bit here */
+		outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
+		      I2C_CON);
+
+		status = wait_for_pin ();
+		if (status & I2C_STAT_RRDY) {
+			*value = inw (I2C_DATA);
+			udelay (20000);
+		} else {
+			i2c_error = 1;
+		}
+
+		if (!i2c_error) {
+			outw (I2C_CON_EN, I2C_CON);
+			while (inw (I2C_STAT)
+			       || (inw (I2C_CON) & I2C_CON_MST)) {
+				udelay (10000);
+				inw (I2C_IV);
+			}
+		}
+	}
+
+	return i2c_error;
+}
+
+static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
+{
+	int i2c_error = 0;
+	u16 status;
+
+	/* wait until bus not busy */
+	wait_for_bb ();
+
+	/* two bytes */
+	outw (2, I2C_CNT);
+	/* set slave address */
+	outw (devaddr, I2C_SA);
+	/* stop bit needed here */
+	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
+	      I2C_CON_STP, I2C_CON);
+
+	/* wait until state change */
+	status = wait_for_pin ();
+
+	if (status & I2C_STAT_XRDY) {
+		/* send out two bytes */
+		outw ((value << 8) + regoffset, I2C_DATA);
+		/* must have enough delay to allow BB bit to go low */
+		udelay (30000);
+		if (inw (I2C_STAT) & I2C_STAT_NACK) {
+			i2c_error = 1;
+		}
+	} else {
+		i2c_error = 1;
+	}
+
+	if (!i2c_error) {
+		outw (I2C_CON_EN, I2C_CON);
+		while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) {
+			udelay (1000);
+			/* have to read to clear intrrupt */
+			inw (I2C_IV);
+		}
+	}
+
+	return i2c_error;
+}
+
+int i2c_probe (uchar chip)
+{
+	int res = 1;
+
+	if (chip == inw (I2C_OA)) {
+		return res;
+	}
+
+	/* wait until bus not busy */
+	wait_for_bb ();
+
+	/* try to read one byte */
+	outw (1, I2C_CNT);
+	/* set slave address */
+	outw (chip, I2C_SA);
+	/* stop bit needed here */
+	outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON);
+	/* enough delay for the NACK bit set */
+	udelay (2000);
+	if (!(inw (I2C_STAT) & I2C_STAT_NACK)) {
+		res = 0;
+	} else {
+		outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON);
+		udelay (20);
+		wait_for_bb ();
+	}
+
+	return res;
+}
+
+int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	int i;
+
+	if (alen > 1) {
+		printf ("I2C read: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (addr + len > 256) {
+		printf ("I2C read: address out of range\n");
+		return 1;
+	}
+
+	for (i = 0; i < len; i++) {
+		if (i2c_read_byte (chip, addr + i, &buffer[i])) {
+			printf ("I2C read: I/O error\n");
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	int i;
+
+	if (alen > 1) {
+		printf ("I2C read: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (addr + len > 256) {
+		printf ("I2C read: address out of range\n");
+		return 1;
+	}
+
+	for (i = 0; i < len; i++) {
+		if (i2c_write_byte (chip, addr + i, buffer[i])) {
+			printf ("I2C read: I/O error\n");
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static void wait_for_bb (void)
+{
+	int timeout = 10;
+
+	while ((inw (I2C_STAT) & I2C_STAT_BB) && timeout--) {
+		inw (I2C_IV);
+		udelay (1000);
+	}
+
+	if (timeout <= 0) {
+		printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
+			inw (I2C_STAT));
+	}
+}
+
+static u16 wait_for_pin (void)
+{
+	u16 status, iv;
+	int timeout = 10;
+
+	do {
+		udelay (1000);
+		status = inw (I2C_STAT);
+		iv = inw (I2C_IV);
+	} while (!iv &&
+		 !(status &
+		   (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
+		    I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
+		    I2C_STAT_AL)) && timeout--);
+
+	if (timeout <= 0) {
+		printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
+			inw (I2C_STAT));
+	}
+
+	return status;
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/omap24xx_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/omap24xx_i2c.c
new file mode 100644
index 000000000..ff18991f0
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/omap24xx_i2c.c
@@ -0,0 +1,437 @@
+/*
+ * Basic I2C functions
+ *
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * This package is free software;  you can redistribute it and/or
+ * modify it under the terms of the license found in the file
+ * named COPYING that should have accompanied this file.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Author: Jian Zhang jzhang@ti.com, Texas Instruments
+ *
+ * Copyright (c) 2003 Wolfgang Denk, wd@denx.de
+ * Rewritten to fit into the current U-Boot framework
+ *
+ * Adapted for OMAP2420 I2C, r-woodruff2@ti.com
+ *
+ */
+
+#include <common.h>
+
+#include <asm/arch/i2c.h>
+#include <asm/io.h>
+
+static void wait_for_bb (void);
+static u16 wait_for_pin (void);
+static void flush_fifo(void);
+
+static struct i2c *i2c_base = (struct i2c *)I2C_DEFAULT_BASE;
+
+static unsigned int bus_initialized[I2C_BUS_MAX];
+static unsigned int current_bus;
+
+void i2c_init (int speed, int slaveadd)
+{
+	int psc, fsscll, fssclh;
+	int hsscll = 0, hssclh = 0;
+	u32 scll, sclh;
+
+	/* Only handle standard, fast and high speeds */
+	if ((speed != OMAP_I2C_STANDARD) &&
+	    (speed != OMAP_I2C_FAST_MODE) &&
+	    (speed != OMAP_I2C_HIGH_SPEED)) {
+		printf("Error : I2C unsupported speed %d\n", speed);
+		return;
+	}
+
+	psc = I2C_IP_CLK / I2C_INTERNAL_SAMPLING_CLK;
+	psc -= 1;
+	if (psc < I2C_PSC_MIN) {
+		printf("Error : I2C unsupported prescalar %d\n", psc);
+		return;
+	}
+
+	if (speed == OMAP_I2C_HIGH_SPEED) {
+		/* High speed */
+
+		/* For first phase of HS mode */
+		fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK /
+			(2 * OMAP_I2C_FAST_MODE);
+
+		fsscll -= I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM;
+		fssclh -= I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM;
+		if (((fsscll < 0) || (fssclh < 0)) ||
+		    ((fsscll > 255) || (fssclh > 255))) {
+			printf("Error : I2C initializing first phase clock\n");
+			return;
+		}
+
+		/* For second phase of HS mode */
+		hsscll = hssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);
+
+		hsscll -= I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM;
+		hssclh -= I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM;
+		if (((fsscll < 0) || (fssclh < 0)) ||
+		    ((fsscll > 255) || (fssclh > 255))) {
+			printf("Error : I2C initializing second phase clock\n");
+			return;
+		}
+
+		scll = (unsigned int)hsscll << 8 | (unsigned int)fsscll;
+		sclh = (unsigned int)hssclh << 8 | (unsigned int)fssclh;
+
+	} else {
+		/* Standard and fast speed */
+		fsscll = fssclh = I2C_INTERNAL_SAMPLING_CLK / (2 * speed);
+
+		fsscll -= I2C_FASTSPEED_SCLL_TRIM;
+		fssclh -= I2C_FASTSPEED_SCLH_TRIM;
+		if (((fsscll < 0) || (fssclh < 0)) ||
+		    ((fsscll > 255) || (fssclh > 255))) {
+			printf("Error : I2C initializing clock\n");
+			return;
+		}
+
+		scll = (unsigned int)fsscll;
+		sclh = (unsigned int)fssclh;
+	}
+
+	writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
+	udelay(1000);
+	writew(0x0, &i2c_base->sysc); /* will probably self clear but */
+
+	if (readw (&i2c_base->con) & I2C_CON_EN) {
+		writew (0, &i2c_base->con);
+		udelay (50000);
+	}
+
+	writew(psc, &i2c_base->psc);
+	writew(scll, &i2c_base->scll);
+	writew(sclh, &i2c_base->sclh);
+
+	/* own address */
+	writew (slaveadd, &i2c_base->oa);
+	writew (I2C_CON_EN, &i2c_base->con);
+
+	/* have to enable intrrupts or OMAP i2c module doesn't work */
+	writew (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
+		I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
+	udelay (1000);
+	flush_fifo();
+	writew (0xFFFF, &i2c_base->stat);
+	writew (0, &i2c_base->cnt);
+
+	bus_initialized[current_bus] = 1;
+}
+
+static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
+{
+	int i2c_error = 0;
+	u16 status;
+
+	/* wait until bus not busy */
+	wait_for_bb ();
+
+	/* one byte only */
+	writew (1, &i2c_base->cnt);
+	/* set slave address */
+	writew (devaddr, &i2c_base->sa);
+	/* no stop bit needed here */
+	writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, &i2c_base->con);
+
+	status = wait_for_pin ();
+
+	if (status & I2C_STAT_XRDY) {
+		/* Important: have to use byte access */
+		writeb (regoffset, &i2c_base->data);
+		udelay (20000);
+		if (readw (&i2c_base->stat) & I2C_STAT_NACK) {
+			i2c_error = 1;
+		}
+	} else {
+		i2c_error = 1;
+	}
+
+	if (!i2c_error) {
+		/* free bus, otherwise we can't use a combined transction */
+		writew (0, &i2c_base->con);
+		while (readw (&i2c_base->stat) || (readw (&i2c_base->con) & I2C_CON_MST)) {
+			udelay (10000);
+			/* Have to clear pending interrupt to clear I2C_STAT */
+			writew (0xFFFF, &i2c_base->stat);
+		}
+
+		wait_for_bb ();
+		/* set slave address */
+		writew (devaddr, &i2c_base->sa);
+		/* read one byte from slave */
+		writew (1, &i2c_base->cnt);
+		/* need stop bit here */
+		writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP,
+			&i2c_base->con);
+
+		status = wait_for_pin ();
+		if (status & I2C_STAT_RRDY) {
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+			*value = readb (&i2c_base->data);
+#else
+			*value = readw (&i2c_base->data);
+#endif
+			udelay (20000);
+		} else {
+			i2c_error = 1;
+		}
+
+		if (!i2c_error) {
+			writew (I2C_CON_EN, &i2c_base->con);
+			while (readw (&i2c_base->stat)
+			       || (readw (&i2c_base->con) & I2C_CON_MST)) {
+				udelay (10000);
+				writew (0xFFFF, &i2c_base->stat);
+			}
+		}
+	}
+	flush_fifo();
+	writew (0xFFFF, &i2c_base->stat);
+	writew (0, &i2c_base->cnt);
+	return i2c_error;
+}
+
+static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
+{
+	int i2c_error = 0;
+	u16 status, stat;
+
+	/* wait until bus not busy */
+	wait_for_bb ();
+
+	/* two bytes */
+	writew (2, &i2c_base->cnt);
+	/* set slave address */
+	writew (devaddr, &i2c_base->sa);
+	/* stop bit needed here */
+	writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
+		I2C_CON_STP, &i2c_base->con);
+
+	/* wait until state change */
+	status = wait_for_pin ();
+
+	if (status & I2C_STAT_XRDY) {
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+		/* send out 1 byte */
+		writeb (regoffset, &i2c_base->data);
+		writew (I2C_STAT_XRDY, &i2c_base->stat);
+
+		status = wait_for_pin ();
+		if ((status & I2C_STAT_XRDY)) {
+			/* send out next 1 byte */
+			writeb (value, &i2c_base->data);
+			writew (I2C_STAT_XRDY, &i2c_base->stat);
+		} else {
+			i2c_error = 1;
+		}
+#else
+		/* send out two bytes */
+		writew ((value << 8) + regoffset, &i2c_base->data);
+#endif
+		/* must have enough delay to allow BB bit to go low */
+		udelay (50000);
+		if (readw (&i2c_base->stat) & I2C_STAT_NACK) {
+			i2c_error = 1;
+		}
+	} else {
+		i2c_error = 1;
+	}
+
+	if (!i2c_error) {
+		int eout = 200;
+
+		writew (I2C_CON_EN, &i2c_base->con);
+		while ((stat = readw (&i2c_base->stat)) || (readw (&i2c_base->con) & I2C_CON_MST)) {
+			udelay (1000);
+			/* have to read to clear intrrupt */
+			writew (0xFFFF, &i2c_base->stat);
+			if(--eout == 0) /* better leave with error than hang */
+				break;
+		}
+	}
+	flush_fifo();
+	writew (0xFFFF, &i2c_base->stat);
+	writew (0, &i2c_base->cnt);
+	return i2c_error;
+}
+
+static void flush_fifo(void)
+{	u16 stat;
+
+	/* note: if you try and read data when its not there or ready
+	 * you get a bus error
+	 */
+	while(1){
+		stat = readw(&i2c_base->stat);
+		if(stat == I2C_STAT_RRDY){
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+			readb(&i2c_base->data);
+#else
+			readw(&i2c_base->data);
+#endif
+			writew(I2C_STAT_RRDY,&i2c_base->stat);
+			udelay(1000);
+		}else
+			break;
+	}
+}
+
+int i2c_probe (uchar chip)
+{
+	int res = 1; /* default = fail */
+
+	if (chip == readw (&i2c_base->oa)) {
+		return res;
+	}
+
+	/* wait until bus not busy */
+	wait_for_bb ();
+
+	/* try to read one byte */
+	writew (1, &i2c_base->cnt);
+	/* set slave address */
+	writew (chip, &i2c_base->sa);
+	/* stop bit needed here */
+	writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, &i2c_base->con);
+	/* enough delay for the NACK bit set */
+	udelay (50000);
+
+	if (!(readw (&i2c_base->stat) & I2C_STAT_NACK)) {
+		res = 0;      /* success case */
+		flush_fifo();
+		writew(0xFFFF, &i2c_base->stat);
+	} else {
+		writew(0xFFFF, &i2c_base->stat);	 /* failue, clear sources*/
+		writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con); /* finish up xfer */
+		udelay(20000);
+		wait_for_bb ();
+	}
+	flush_fifo();
+	writew (0, &i2c_base->cnt); /* don't allow any more data in...we don't want it.*/
+	writew(0xFFFF, &i2c_base->stat);
+	return res;
+}
+
+int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	int i;
+
+	if (alen > 1) {
+		printf ("I2C read: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (addr + len > 256) {
+		printf ("I2C read: address out of range\n");
+		return 1;
+	}
+
+	for (i = 0; i < len; i++) {
+		if (i2c_read_byte (chip, addr + i, &buffer[i])) {
+			printf ("I2C read: I/O error\n");
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	int i;
+
+	if (alen > 1) {
+		printf ("I2C read: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (addr + len > 256) {
+		printf ("I2C read: address out of range\n");
+		return 1;
+	}
+
+	for (i = 0; i < len; i++) {
+		if (i2c_write_byte (chip, addr + i, buffer[i])) {
+			printf ("I2C read: I/O error\n");
+			i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static void wait_for_bb (void)
+{
+	int timeout = 10;
+	u16 stat;
+
+	writew(0xFFFF, &i2c_base->stat);	 /* clear current interruts...*/
+	while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
+		writew (stat, &i2c_base->stat);
+		udelay (50000);
+	}
+
+	if (timeout <= 0) {
+		printf ("timed out in wait_for_bb: I2C_STAT=%x\n",
+			readw (&i2c_base->stat));
+	}
+	writew(0xFFFF, &i2c_base->stat);	 /* clear delayed stuff*/
+}
+
+static u16 wait_for_pin (void)
+{
+	u16 status;
+	int timeout = 10;
+
+	do {
+		udelay (1000);
+		status = readw (&i2c_base->stat);
+	} while (  !(status &
+		   (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
+		    I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
+		    I2C_STAT_AL)) && timeout--);
+
+	if (timeout <= 0) {
+		printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
+			readw (&i2c_base->stat));
+			writew(0xFFFF, &i2c_base->stat);
+}
+	return status;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+	if ((bus < 0) || (bus >= I2C_BUS_MAX)) {
+		printf("Bad bus: %d\n", bus);
+		return -1;
+	}
+
+#if I2C_BUS_MAX==3
+	if (bus == 2)
+		i2c_base = (struct i2c *)I2C_BASE3;
+	else
+#endif
+	if (bus == 1)
+		i2c_base = (struct i2c *)I2C_BASE2;
+	else
+		i2c_base = (struct i2c *)I2C_BASE1;
+
+	current_bus = bus;
+
+	if(!bus_initialized[current_bus])
+		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+	return 0;
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/pca9564_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/pca9564_i2c.c
new file mode 100644
index 000000000..199a9ee39
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/pca9564_i2c.c
@@ -0,0 +1,189 @@
+/*
+ * File:         drivers/i2c/pca9564.c
+ * Based on:     drivers/i2c/s3c44b0_i2c.c
+ * Author:
+ *
+ * Created:      2009-06-23
+ * Description:  PCA9564 i2c bridge driver
+ *
+ * Modified:
+ *               Copyright 2009 CJSC "NII STT", http://www.niistt.ru/
+ *
+ * Bugs:
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <pca9564.h>
+#include <asm/io.h>
+
+#define PCA_STA			(CONFIG_PCA9564_BASE + 0)
+#define PCA_TO			(CONFIG_PCA9564_BASE + 0)
+#define PCA_DAT			(CONFIG_PCA9564_BASE + (1 << 2))
+#define PCA_ADR			(CONFIG_PCA9564_BASE + (2 << 2))
+#define PCA_CON			(CONFIG_PCA9564_BASE + (3 << 2))
+
+static unsigned char pca_read_reg(unsigned int reg)
+{
+	return readb((void *)reg);
+}
+
+static void pca_write_reg(unsigned int reg, unsigned char value)
+{
+	writeb(value, (void *)reg);
+}
+
+static int pca_wait_busy(void)
+{
+	unsigned int timeout = 10000;
+
+	while (!(pca_read_reg(PCA_CON) & PCA_CON_SI) && --timeout)
+		udelay(1);
+
+	if (timeout == 0)
+		debug("I2C timeout!\n");
+
+	debug("CON = 0x%02x, STA = 0x%02x\n", pca_read_reg(PCA_CON),
+	       pca_read_reg(PCA_STA));
+
+	return timeout ? 0 : 1;
+}
+
+/*=====================================================================*/
+/*                         Public Functions                            */
+/*=====================================================================*/
+
+/*-----------------------------------------------------------------------
+ * Initialization
+ */
+void i2c_init(int speed, int slaveaddr)
+{
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO | speed);
+}
+
+/*
+ * Probe the given I2C chip address.  Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+
+int i2c_probe(uchar chip)
+{
+	unsigned char res;
+
+	pca_write_reg(PCA_CON, PCA_CON_STA | PCA_CON_ENSIO);
+	pca_wait_busy();
+
+	pca_write_reg(PCA_CON, PCA_CON_STA | PCA_CON_ENSIO);
+
+	pca_write_reg(PCA_DAT, (chip << 1) | 1);
+	res = pca_wait_busy();
+
+	if ((res == 0) && (pca_read_reg(PCA_STA) == 0x48))
+		res = 1;
+
+	pca_write_reg(PCA_CON, PCA_CON_STO | PCA_CON_ENSIO);
+
+	return res;
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int i;
+
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA);
+	pca_wait_busy();
+
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+	pca_write_reg(PCA_DAT, (chip << 1));
+	pca_wait_busy();
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+	if (alen > 0) {
+		pca_write_reg(PCA_DAT, addr);
+		pca_wait_busy();
+		pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+	}
+
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STO);
+
+	udelay(500);
+
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA);
+	pca_wait_busy();
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+	pca_write_reg(PCA_DAT, (chip << 1) | 1);
+	pca_wait_busy();
+
+	for (i = 0; i < len; ++i) {
+		if (i == len - 1)
+			pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+		else
+			pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_AA);
+
+		pca_wait_busy();
+		buffer[i] = pca_read_reg(PCA_DAT);
+
+	}
+
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STO);
+
+	return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int i;
+
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA);
+	pca_wait_busy();
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+	pca_write_reg(PCA_DAT, chip << 1);
+	pca_wait_busy();
+	pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+
+	if (alen > 0) {
+		pca_write_reg(PCA_DAT, addr);
+		pca_wait_busy();
+		pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+	}
+
+	for (i = 0; i < len; ++i) {
+		pca_write_reg(PCA_DAT, buffer[i]);
+		pca_wait_busy();
+		pca_write_reg(PCA_CON, PCA_CON_ENSIO);
+	}
+
+	pca_write_reg(PCA_CON, PCA_CON_STO | PCA_CON_ENSIO);
+
+	return 0;
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/ppc4xx_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/ppc4xx_i2c.c
new file mode 100644
index 000000000..e9548f1a6
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/ppc4xx_i2c.c
@@ -0,0 +1,439 @@
+/*
+ * (C) Copyright 2007-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * based on work by Anne Sophie Harnois <anne-sophie.harnois@nextream.fr>
+ *
+ * (C) Copyright 2001
+ * Bill Hunter,  Wave 7 Optics, williamhunter@mediaone.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <4xx_i2c.h>
+#include <i2c.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_HARD_I2C
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Initialize the bus pointer to whatever one the SPD EEPROM is on.
+ * Default is bus 0.  This is necessary because the DDR initialization
+ * runs from ROM, and we can't switch buses because we can't modify
+ * the global variables.
+ */
+#ifndef CONFIG_SYS_SPD_BUS_NUM
+#define CONFIG_SYS_SPD_BUS_NUM	0
+#endif
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) =
+	CONFIG_SYS_SPD_BUS_NUM;
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+static void _i2c_bus_reset(void)
+{
+	struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+	int i;
+	u8 dc;
+
+	/* Reset status register */
+	/* write 1 in SCMP and IRQA to clear these fields */
+	out_8(&i2c->sts, 0x0A);
+
+	/* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
+	out_8(&i2c->extsts, 0x8F);
+
+	/* Place chip in the reset state */
+	out_8(&i2c->xtcntlss, IIC_XTCNTLSS_SRST);
+
+	/* Check if bus is free */
+	dc = in_8(&i2c->directcntl);
+	if (!DIRCTNL_FREE(dc)){
+		/* Try to set bus free state */
+		out_8(&i2c->directcntl, IIC_DIRCNTL_SDAC | IIC_DIRCNTL_SCC);
+
+		/* Wait until we regain bus control */
+		for (i = 0; i < 100; ++i) {
+			dc = in_8(&i2c->directcntl);
+			if (DIRCTNL_FREE(dc))
+				break;
+
+			/* Toggle SCL line */
+			dc ^= IIC_DIRCNTL_SCC;
+			out_8(&i2c->directcntl, dc);
+			udelay(10);
+			dc ^= IIC_DIRCNTL_SCC;
+			out_8(&i2c->directcntl, dc);
+		}
+	}
+
+	/* Remove reset */
+	out_8(&i2c->xtcntlss, 0);
+}
+
+void i2c_init(int speed, int slaveaddr)
+{
+	struct ppc4xx_i2c *i2c;
+	int val, divisor;
+	int bus;
+
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+	/*
+	 * Call board specific i2c bus reset routine before accessing the
+	 * environment, which might be in a chip on that bus. For details
+	 * about this problem see doc/I2C_Edge_Conditions.
+	 */
+	i2c_init_board();
+#endif
+
+	for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) {
+		I2C_SET_BUS(bus);
+
+		/* Set i2c pointer after calling I2C_SET_BUS() */
+		i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+
+		/* Handle possible failed I2C state */
+		/* FIXME: put this into i2c_init_board()? */
+		_i2c_bus_reset();
+
+		/* clear lo master address */
+		out_8(&i2c->lmadr, 0);
+
+		/* clear hi master address */
+		out_8(&i2c->hmadr, 0);
+
+		/* clear lo slave address */
+		out_8(&i2c->lsadr, 0);
+
+		/* clear hi slave address */
+		out_8(&i2c->hsadr, 0);
+
+		/* Clock divide Register */
+		/* set divisor according to freq_opb */
+		divisor = (get_OPB_freq() - 1) / 10000000;
+		if (divisor == 0)
+			divisor = 1;
+		out_8(&i2c->clkdiv, divisor);
+
+		/* no interrupts */
+		out_8(&i2c->intrmsk, 0);
+
+		/* clear transfer count */
+		out_8(&i2c->xfrcnt, 0);
+
+		/* clear extended control & stat */
+		/* write 1 in SRC SRS SWC SWS to clear these fields */
+		out_8(&i2c->xtcntlss, 0xF0);
+
+		/* Mode Control Register
+		   Flush Slave/Master data buffer */
+		out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
+
+		val = in_8(&i2c->mdcntl);
+
+		/* Ignore General Call, slave transfers are ignored,
+		 * disable interrupts, exit unknown bus state, enable hold
+		 * SCL 100kHz normaly or FastMode for 400kHz and above
+		 */
+
+		val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL;
+		if (speed >= 400000)
+			val |= IIC_MDCNTL_FSM;
+		out_8(&i2c->mdcntl, val);
+
+		/* clear control reg */
+		out_8(&i2c->cntl, 0x00);
+	}
+
+	/* set to SPD bus as default bus upon powerup */
+	I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+}
+
+/*
+ * This code tries to use the features of the 405GP i2c
+ * controller. It will transfer up to 4 bytes in one pass
+ * on the loop. It only does out_8((u8 *)lbz) to the buffer when it
+ * is possible to do out16(lhz) transfers.
+ *
+ * cmd_type is 0 for write 1 for read.
+ *
+ * addr_len can take any value from 0-255, it is only limited
+ * by the char, we could make it larger if needed. If it is
+ * 0 we skip the address write cycle.
+ *
+ * Typical case is a Write of an addr followd by a Read. The
+ * IBM FAQ does not cover this. On the last byte of the write
+ * we don't set the creg CHT bit, and on the first bytes of the
+ * read we set the RPST bit.
+ *
+ * It does not support address only transfers, there must be
+ * a data part. If you want to write the address yourself, put
+ * it in the data pointer.
+ *
+ * It does not support transfer to/from address 0.
+ *
+ * It does not check XFRCNT.
+ */
+static int i2c_transfer(unsigned char cmd_type,
+			unsigned char chip,
+			unsigned char addr[],
+			unsigned char addr_len,
+			unsigned char data[],
+			unsigned short data_len)
+{
+	struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR;
+	u8 *ptr;
+	int reading;
+	int tran, cnt;
+	int result;
+	int status;
+	int i;
+	u8 creg;
+
+	if (data == 0 || data_len == 0) {
+		/* Don't support data transfer of no length or to address 0 */
+		printf( "i2c_transfer: bad call\n" );
+		return IIC_NOK;
+	}
+	if (addr && addr_len) {
+		ptr = addr;
+		cnt = addr_len;
+		reading = 0;
+	} else {
+		ptr = data;
+		cnt = data_len;
+		reading = cmd_type;
+	}
+
+	/* Clear Stop Complete Bit */
+	out_8(&i2c->sts, IIC_STS_SCMP);
+
+	/* Check init */
+	i = 10;
+	do {
+		/* Get status */
+		status = in_8(&i2c->sts);
+		i--;
+	} while ((status & IIC_STS_PT) && (i > 0));
+
+	if (status & IIC_STS_PT) {
+		result = IIC_NOK_TOUT;
+		return(result);
+	}
+
+	/* flush the Master/Slave Databuffers */
+	out_8(&i2c->mdcntl, in_8(&i2c->mdcntl) |
+	      IIC_MDCNTL_FMDB | IIC_MDCNTL_FSDB);
+
+	/* need to wait 4 OPB clocks? code below should take that long */
+
+	/* 7-bit adressing */
+	out_8(&i2c->hmadr, 0);
+	out_8(&i2c->lmadr, chip);
+
+	tran = 0;
+	result = IIC_OK;
+	creg = 0;
+
+	while (tran != cnt && (result == IIC_OK)) {
+		int  bc,j;
+
+		/*
+		 * Control register =
+		 * Normal transfer, 7-bits adressing, Transfer up to
+		 * bc bytes, Normal start, Transfer is a sequence of transfers
+		 */
+		creg |= IIC_CNTL_PT;
+
+		bc = (cnt - tran) > 4 ? 4 : cnt - tran;
+		creg |= (bc - 1) << 4;
+		/* if the real cmd type is write continue trans */
+		if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt))
+			creg |= IIC_CNTL_CHT;
+
+		if (reading) {
+			creg |= IIC_CNTL_READ;
+		} else {
+			for(j = 0; j < bc; j++) {
+				/* Set buffer */
+				out_8(&i2c->mdbuf, ptr[tran + j]);
+			}
+		}
+		out_8(&i2c->cntl, creg);
+
+		/*
+		 * Transfer is in progress
+		 * we have to wait for upto 5 bytes of data
+		 * 1 byte chip address+r/w bit then bc bytes
+		 * of data.
+		 * udelay(10) is 1 bit time at 100khz
+		 * Doubled for slop. 20 is too small.
+		 */
+		i = 2 * 5 * 8;
+		do {
+			/* Get status */
+			status = in_8(&i2c->sts);
+			udelay(10);
+			i--;
+		} while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR) &&
+			 (i > 0));
+
+		if (status & IIC_STS_ERR) {
+			result = IIC_NOK;
+			status = in_8(&i2c->extsts);
+			/* Lost arbitration? */
+			if (status & IIC_EXTSTS_LA)
+				result = IIC_NOK_LA;
+			/* Incomplete transfer? */
+			if (status & IIC_EXTSTS_ICT)
+				result = IIC_NOK_ICT;
+			/* Transfer aborted? */
+			if (status & IIC_EXTSTS_XFRA)
+				result = IIC_NOK_XFRA;
+		} else if ( status & IIC_STS_PT) {
+			result = IIC_NOK_TOUT;
+		}
+
+		/* Command is reading => get buffer */
+		if ((reading) && (result == IIC_OK)) {
+			/* Are there data in buffer */
+			if (status & IIC_STS_MDBS) {
+				/*
+				 * even if we have data we have to wait 4OPB
+				 * clocks for it to hit the front of the FIFO,
+				 * after that we can just read. We should check
+				 * XFCNT here and if the FIFO is full there is
+				 * no need to wait.
+				 */
+				udelay(1);
+				for (j = 0; j < bc; j++)
+					ptr[tran + j] = in_8(&i2c->mdbuf);
+			} else
+				result = IIC_NOK_DATA;
+		}
+		creg = 0;
+		tran += bc;
+		if (ptr == addr && tran == cnt) {
+			ptr = data;
+			cnt = data_len;
+			tran = 0;
+			reading = cmd_type;
+			if (reading)
+				creg = IIC_CNTL_RPST;
+		}
+	}
+	return result;
+}
+
+int i2c_probe(uchar chip)
+{
+	uchar buf[1];
+
+	buf[0] = 0;
+
+	/*
+	 * What is needed is to send the chip address and verify that the
+	 * address was <ACK>ed (i.e. there was a chip at that address which
+	 * drove the data line low).
+	 */
+	return (i2c_transfer(1, chip << 1, 0, 0, buf, 1) != 0);
+}
+
+static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer,
+			       int len, int read)
+{
+	uchar xaddr[4];
+	int ret;
+
+	if (alen > 4) {
+		printf("I2C: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (alen > 0) {
+		xaddr[0] = (addr >> 24) & 0xFF;
+		xaddr[1] = (addr >> 16) & 0xFF;
+		xaddr[2] = (addr >> 8) & 0xFF;
+		xaddr[3] = addr & 0xFF;
+	}
+
+
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+	/*
+	 * EEPROM chips that implement "address overflow" are ones
+	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	 * address and the extra bits end up in the "chip address"
+	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+	 * four 256 byte chips.
+	 *
+	 * Note that we consider the length of the address field to
+	 * still be one byte because the extra address bits are
+	 * hidden in the chip address.
+	 */
+	if (alen > 0)
+		chip |= ((addr >> (alen * 8)) &
+			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+	if ((ret = i2c_transfer(read, chip << 1, &xaddr[4 - alen], alen,
+				buffer, len)) != 0) {
+		if (gd->have_console) {
+			printf("I2C %s: failed %d\n",
+			       read ? "read" : "write", ret);
+		}
+
+		return 1;
+	}
+
+	return 0;
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 1);
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
+{
+	return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 0);
+}
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Functions for multiple I2C bus handling
+ */
+unsigned int i2c_get_bus_num(void)
+{
+	return i2c_bus_num;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+		return -1;
+
+	i2c_bus_num = bus;
+
+	return 0;
+}
+#endif	/* CONFIG_I2C_MULTI_BUS */
+#endif	/* CONFIG_HARD_I2C */
diff --git a/roms/u-boot-sam460ex/drivers/i2c/s3c24x0_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/s3c24x0_i2c.c
new file mode 100644
index 000000000..c8371cf73
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/s3c24x0_i2c.c
@@ -0,0 +1,443 @@
+/*
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This code should work for both the S3C2400 and the S3C2410
+ * as they seem to have the same I2C controller inside.
+ * The different address mapping is handled by the s3c24xx.h files below.
+ */
+
+#include <common.h>
+#include <asm/arch/s3c24x0_cpu.h>
+
+#include <asm/io.h>
+#include <i2c.h>
+
+#ifdef CONFIG_HARD_I2C
+
+#define	I2C_WRITE	0
+#define I2C_READ	1
+
+#define I2C_OK		0
+#define I2C_NOK		1
+#define I2C_NACK	2
+#define I2C_NOK_LA	3	/* Lost arbitration */
+#define I2C_NOK_TOUT	4	/* time out */
+
+#define I2CSTAT_BSY	0x20	/* Busy bit */
+#define I2CSTAT_NACK	0x01	/* Nack bit */
+#define I2CCON_IRPND	0x10	/* Interrupt pending bit */
+#define I2C_MODE_MT	0xC0	/* Master Transmit Mode */
+#define I2C_MODE_MR	0x80	/* Master Receive Mode */
+#define I2C_START_STOP	0x20	/* START / STOP */
+#define I2C_TXRX_ENA	0x10	/* I2C Tx/Rx enable */
+
+#define I2C_TIMEOUT 1		/* 1 second */
+
+static int GetI2CSDA(void)
+{
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
+
+#ifdef CONFIG_S3C2410
+	return (readl(&gpio->GPEDAT) & 0x8000) >> 15;
+#endif
+#ifdef CONFIG_S3C2400
+	return (readl(&gpio->PGDAT) & 0x0020) >> 5;
+#endif
+}
+
+#if 0
+static void SetI2CSDA(int x)
+{
+	rGPEDAT = (rGPEDAT & ~0x8000) | (x & 1) << 15;
+}
+#endif
+
+static void SetI2CSCL(int x)
+{
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
+
+#ifdef CONFIG_S3C2410
+	writel((readl(&gpio->GPEDAT) & ~0x4000) | (x & 1) << 14, &gpio->GPEDAT);
+#endif
+#ifdef CONFIG_S3C2400
+	writel((readl(&gpio->PGDAT) & ~0x0040) | (x & 1) << 6, &gpio->PGDAT);
+#endif
+}
+
+static int WaitForXfer(void)
+{
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	int i;
+
+	i = I2C_TIMEOUT * 10000;
+	while (!(readl(&i2c->IICCON) & I2CCON_IRPND) && (i > 0)) {
+		udelay(100);
+		i--;
+	}
+
+	return (readl(&i2c->IICCON) & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
+}
+
+static int IsACK(void)
+{
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+
+	return !(readl(&i2c->IICSTAT) & I2CSTAT_NACK);
+}
+
+static void ReadWriteByte(void)
+{
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+
+	writel(readl(&i2c->IICCON) & ~I2CCON_IRPND, &i2c->IICCON);
+}
+
+void i2c_init(int speed, int slaveadd)
+{
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
+	ulong freq, pres = 16, div;
+	int i;
+
+	/* wait for some time to give previous transfer a chance to finish */
+
+	i = I2C_TIMEOUT * 1000;
+	while ((readl(&i2c->IICSTAT) && I2CSTAT_BSY) && (i > 0)) {
+		udelay(1000);
+		i--;
+	}
+
+	if ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) || GetI2CSDA() == 0) {
+#ifdef CONFIG_S3C2410
+		ulong old_gpecon = readl(&gpio->GPECON);
+#endif
+#ifdef CONFIG_S3C2400
+		ulong old_gpecon = readl(&gpio->PGCON);
+#endif
+		/* bus still busy probably by (most) previously interrupted
+		   transfer */
+
+#ifdef CONFIG_S3C2410
+		/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
+		writel((readl(&gpio->GPECON) & ~0xF0000000) | 0x10000000,
+		       &gpio->GPECON);
+#endif
+#ifdef CONFIG_S3C2400
+		/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
+		writel((readl(&gpio->PGCON) & ~0x00003c00) | 0x00001000,
+		       &gpio->PGCON);
+#endif
+
+		/* toggle I2CSCL until bus idle */
+		SetI2CSCL(0);
+		udelay(1000);
+		i = 10;
+		while ((i > 0) && (GetI2CSDA() != 1)) {
+			SetI2CSCL(1);
+			udelay(1000);
+			SetI2CSCL(0);
+			udelay(1000);
+			i--;
+		}
+		SetI2CSCL(1);
+		udelay(1000);
+
+		/* restore pin functions */
+#ifdef CONFIG_S3C2410
+		writel(old_gpecon, &gpio->GPECON);
+#endif
+#ifdef CONFIG_S3C2400
+		writel(old_gpecon, &gpio->PGCON);
+#endif
+	}
+
+	/* calculate prescaler and divisor values */
+	freq = get_PCLK();
+	if ((freq / pres / (16 + 1)) > speed)
+		/* set prescaler to 512 */
+		pres = 512;
+
+	div = 0;
+	while ((freq / pres / (div + 1)) > speed)
+		div++;
+
+	/* set prescaler, divisor according to freq, also set
+	 * ACKGEN, IRQ */
+	writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->IICCON);
+
+	/* init to SLAVE REVEIVE and set slaveaddr */
+	writel(0, &i2c->IICSTAT);
+	writel(slaveadd, &i2c->IICADD);
+	/* program Master Transmit (and implicit STOP) */
+	writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
+
+}
+
+/*
+ * cmd_type is 0 for write, 1 for read.
+ *
+ * addr_len can take any value from 0-255, it is only limited
+ * by the char, we could make it larger if needed. If it is
+ * 0 we skip the address write cycle.
+ */
+static
+int i2c_transfer(unsigned char cmd_type,
+		 unsigned char chip,
+		 unsigned char addr[],
+		 unsigned char addr_len,
+		 unsigned char data[], unsigned short data_len)
+{
+	struct s3c24x0_i2c *i2c = s3c24x0_get_base_i2c();
+	int i, result;
+
+	if (data == 0 || data_len == 0) {
+		/*Don't support data transfer of no length or to address 0 */
+		printf("i2c_transfer: bad call\n");
+		return I2C_NOK;
+	}
+
+	/* Check I2C bus idle */
+	i = I2C_TIMEOUT * 1000;
+	while ((readl(&i2c->IICSTAT) & I2CSTAT_BSY) && (i > 0)) {
+		udelay(1000);
+		i--;
+	}
+
+	if (readl(&i2c->IICSTAT) & I2CSTAT_BSY)
+		return I2C_NOK_TOUT;
+
+	writel(readl(&i2c->IICCON) | 0x80, &i2c->IICCON);
+	result = I2C_OK;
+
+	switch (cmd_type) {
+	case I2C_WRITE:
+		if (addr && addr_len) {
+			writel(chip, &i2c->IICDS);
+			/* send START */
+			writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+			       &i2c->IICSTAT);
+			i = 0;
+			while ((i < addr_len) && (result == I2C_OK)) {
+				result = WaitForXfer();
+				writel(addr[i], &i2c->IICDS);
+				ReadWriteByte();
+				i++;
+			}
+			i = 0;
+			while ((i < data_len) && (result == I2C_OK)) {
+				result = WaitForXfer();
+				writel(data[i], &i2c->IICDS);
+				ReadWriteByte();
+				i++;
+			}
+		} else {
+			writel(chip, &i2c->IICDS);
+			/* send START */
+			writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+			       &i2c->IICSTAT);
+			i = 0;
+			while ((i < data_len) && (result = I2C_OK)) {
+				result = WaitForXfer();
+				writel(data[i], &i2c->IICDS);
+				ReadWriteByte();
+				i++;
+			}
+		}
+
+		if (result == I2C_OK)
+			result = WaitForXfer();
+
+		/* send STOP */
+		writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+		ReadWriteByte();
+		break;
+
+	case I2C_READ:
+		if (addr && addr_len) {
+			writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->IICSTAT);
+			writel(chip, &i2c->IICDS);
+			/* send START */
+			writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+			       &i2c->IICSTAT);
+			result = WaitForXfer();
+			if (IsACK()) {
+				i = 0;
+				while ((i < addr_len) && (result == I2C_OK)) {
+					writel(addr[i], &i2c->IICDS);
+					ReadWriteByte();
+					result = WaitForXfer();
+					i++;
+				}
+
+				writel(chip, &i2c->IICDS);
+				/* resend START */
+				writel(I2C_MODE_MR | I2C_TXRX_ENA |
+				       I2C_START_STOP, &i2c->IICSTAT);
+				ReadWriteByte();
+				result = WaitForXfer();
+				i = 0;
+				while ((i < data_len) && (result == I2C_OK)) {
+					/* disable ACK for final READ */
+					if (i == data_len - 1)
+						writel(readl(&i2c->IICCON)
+						       & ~0x80, &i2c->IICCON);
+					ReadWriteByte();
+					result = WaitForXfer();
+					data[i] = readl(&i2c->IICDS);
+					i++;
+				}
+			} else {
+				result = I2C_NACK;
+			}
+
+		} else {
+			writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+			writel(chip, &i2c->IICDS);
+			/* send START */
+			writel(readl(&i2c->IICSTAT) | I2C_START_STOP,
+			       &i2c->IICSTAT);
+			result = WaitForXfer();
+
+			if (IsACK()) {
+				i = 0;
+				while ((i < data_len) && (result == I2C_OK)) {
+					/* disable ACK for final READ */
+					if (i == data_len - 1)
+						writel(readl(&i2c->IICCON) &
+						       ~0x80, &i2c->IICCON);
+					ReadWriteByte();
+					result = WaitForXfer();
+					data[i] = readl(&i2c->IICDS);
+					i++;
+				}
+			} else {
+				result = I2C_NACK;
+			}
+		}
+
+		/* send STOP */
+		writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->IICSTAT);
+		ReadWriteByte();
+		break;
+
+	default:
+		printf("i2c_transfer: bad call\n");
+		result = I2C_NOK;
+		break;
+	}
+
+	return (result);
+}
+
+int i2c_probe(uchar chip)
+{
+	uchar buf[1];
+
+	buf[0] = 0;
+
+	/*
+	 * What is needed is to send the chip address and verify that the
+	 * address was <ACK>ed (i.e. there was a chip at that address which
+	 * drove the data line low).
+	 */
+	return i2c_transfer(I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK;
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	uchar xaddr[4];
+	int ret;
+
+	if (alen > 4) {
+		printf("I2C read: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (alen > 0) {
+		xaddr[0] = (addr >> 24) & 0xFF;
+		xaddr[1] = (addr >> 16) & 0xFF;
+		xaddr[2] = (addr >> 8) & 0xFF;
+		xaddr[3] = addr & 0xFF;
+	}
+
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+	/*
+	 * EEPROM chips that implement "address overflow" are ones
+	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	 * address and the extra bits end up in the "chip address"
+	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+	 * four 256 byte chips.
+	 *
+	 * Note that we consider the length of the address field to
+	 * still be one byte because the extra address bits are
+	 * hidden in the chip address.
+	 */
+	if (alen > 0)
+		chip |= ((addr >> (alen * 8)) &
+			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+	if ((ret =
+	     i2c_transfer(I2C_READ, chip << 1, &xaddr[4 - alen], alen,
+			  buffer, len)) != 0) {
+		printf("I2c read: failed %d\n", ret);
+		return 1;
+	}
+	return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	uchar xaddr[4];
+
+	if (alen > 4) {
+		printf("I2C write: addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (alen > 0) {
+		xaddr[0] = (addr >> 24) & 0xFF;
+		xaddr[1] = (addr >> 16) & 0xFF;
+		xaddr[2] = (addr >> 8) & 0xFF;
+		xaddr[3] = addr & 0xFF;
+	}
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+	/*
+	 * EEPROM chips that implement "address overflow" are ones
+	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	 * address and the extra bits end up in the "chip address"
+	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+	 * four 256 byte chips.
+	 *
+	 * Note that we consider the length of the address field to
+	 * still be one byte because the extra address bits are
+	 * hidden in the chip address.
+	 */
+	if (alen > 0)
+		chip |= ((addr >> (alen * 8)) &
+			 CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+#endif
+	return (i2c_transfer
+		(I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
+		 len) != 0);
+}
+#endif /* CONFIG_HARD_I2C */
diff --git a/roms/u-boot-sam460ex/drivers/i2c/s3c44b0_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/s3c44b0_i2c.c
new file mode 100644
index 000000000..b4d904b2e
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/s3c44b0_i2c.c
@@ -0,0 +1,315 @@
+/*
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/hardware.h>
+
+/*
+ * Initialization, must be called once on start up, may be called
+ * repeatedly to change the speed and slave addresses.
+ */
+void i2c_init(int speed, int slaveaddr)
+{
+	/*
+		setting up I2C support
+	*/
+	unsigned int save_F,save_PF,rIICCON,rPCONA,rPDATA,rPCONF,rPUPF;
+
+	save_F = PCONF;
+	save_PF = PUPF;
+
+	rPCONF = ((save_F & ~(0xF))| 0xa);
+	rPUPF = (save_PF | 0x3);
+	PCONF = rPCONF; /*PF0:IICSCL, PF1:IICSDA*/
+	PUPF = rPUPF; /* Disable pull-up */
+
+	/* Configuring pin for WC pin of EEprom */
+	rPCONA = PCONA;
+	rPCONA &= ~(1<<9);
+	PCONA = rPCONA;
+
+	rPDATA = PDATA;
+	rPDATA &= ~(1<<9);
+	PDATA = rPDATA;
+
+	/*
+		Enable ACK, IICCLK=MCLK/16, enable interrupt
+		75MHz/16/(12+1) = 390625 Hz
+	*/
+	rIICCON=(1<<7)|(0<<6)|(1<<5)|(0xC);
+	IICCON = rIICCON;
+
+	IICADD = slaveaddr;
+}
+
+/*
+ * Probe the given I2C chip address.  Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(uchar chip)
+{
+	/*
+		not implemented
+	*/
+
+	printf("i2c_probe chip %d\n", (int) chip);
+	return -1;
+}
+
+/*
+ * Read/Write interface:
+ *   chip:    I2C chip address, range 0..127
+ *   addr:    Memory (register) address within the chip
+ *   alen:    Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:  Where to read/write the data
+ *   len:     How many bytes to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+#define S3C44B0X_rIIC_INTPEND               (1<<4)
+#define S3C44B0X_rIIC_LAST_RECEIV_BIT       (1<<0)
+#define S3C44B0X_rIIC_INTERRUPT_ENABLE      (1<<5)
+#define S3C44B0_IIC_TIMEOUT 100
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+
+	int k, j, temp;
+	u32 rIICSTAT;
+
+	/*
+		send the device offset
+	*/
+
+	rIICSTAT = 0xD0;
+	IICSTAT = rIICSTAT;
+
+	IICDS = chip;	/* this is a write operation... */
+
+	rIICSTAT |= (1<<5);
+	IICSTAT = rIICSTAT;
+
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	/* wait and check ACK */
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	IICDS = addr;
+	IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	/*
+		now we can start with the read operation...
+	*/
+
+	IICDS = chip | 0x01;	/* this is a read operation... */
+
+	rIICSTAT = 0x90; /*master recv*/
+	rIICSTAT |= (1<<5);
+	IICSTAT = rIICSTAT;
+
+	IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	for (j=0; j<len-1; j++) {
+
+	/*clear pending bit to resume */
+
+	temp = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+	IICCON = temp;
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+
+		buffer[j] = IICDS; /*save readed data*/
+
+    } /*end for(j)*/
+
+	/*
+		reading the last data
+		unset ACK generation
+	*/
+	temp = IICCON & ~(S3C44B0X_rIIC_INTPEND | (1<<7));
+	IICCON = temp;
+
+	/* wait but NOT check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	buffer[j] = IICDS; /*save readed data*/
+
+	rIICSTAT = 0x90; /*master recv*/
+
+	/* Write operation Terminate sending STOP */
+	IICSTAT = rIICSTAT;
+	/*Clear Int Pending Bit to RESUME*/
+	temp = IICCON;
+	IICCON = temp & (~S3C44B0X_rIIC_INTPEND);
+
+	IICCON = IICCON | (1<<7);	/*restore ACK generation*/
+
+	return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int j, k;
+	u32 rIICSTAT, temp;
+
+
+	/*
+		send the device offset
+	*/
+
+	rIICSTAT = 0xD0;
+	IICSTAT = rIICSTAT;
+
+	IICDS = chip;	/* this is a write operation... */
+
+	rIICSTAT |= (1<<5);
+	IICSTAT = rIICSTAT;
+
+	IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+		return -1;
+
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	IICDS = addr;
+	IICCON = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+
+	/* wait and check ACK */
+	for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+		temp = IICCON;
+		if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+		break;
+		udelay(2000);
+	}
+	if (k==S3C44B0_IIC_TIMEOUT)
+	  return -1;
+
+	temp = IICSTAT;
+	if ((temp & S3C44B0X_rIIC_LAST_RECEIV_BIT) == S3C44B0X_rIIC_LAST_RECEIV_BIT )
+		return -1;
+
+	/*
+		now we can start with the read write operation
+	*/
+	for (j=0; j<len; j++) {
+
+		IICDS = buffer[j]; /*prerare data to write*/
+
+		/*clear pending bit to resume*/
+
+		temp = IICCON & ~(S3C44B0X_rIIC_INTPEND);
+		IICCON = temp;
+
+		/* wait but NOT check ACK */
+		for(k=0; k<S3C44B0_IIC_TIMEOUT; k++) {
+			temp = IICCON;
+			if( (temp & S3C44B0X_rIIC_INTPEND) == S3C44B0X_rIIC_INTPEND)
+			break;
+
+			udelay(2000);
+		}
+
+		if (k==S3C44B0_IIC_TIMEOUT)
+			return -1;
+
+	} /* end for(j) */
+
+	/* sending stop to terminate */
+	rIICSTAT = 0xD0;  /*master send*/
+	IICSTAT = rIICSTAT;
+	/*Clear Int Pending Bit to RESUME*/
+	temp = IICCON;
+	IICCON = temp & (~S3C44B0X_rIIC_INTPEND);
+
+	return 0;
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/soft_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/soft_i2c.c
new file mode 100644
index 000000000..e0cf1e10d
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/soft_i2c.c
@@ -0,0 +1,434 @@
+/*
+ * (C) Copyright 2001, 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This has been changed substantially by Gerald Van Baren, Custom IDEAS,
+ * vanbaren@cideas.com.  It was heavily influenced by LiMon, written by
+ * Neil Russell.
+ */
+
+#include <common.h>
+#ifdef	CONFIG_MPC8260			/* only valid for MPC8260 */
+#include <ioports.h>
+#include <asm/io.h>
+#endif
+#if defined(CONFIG_AT91RM9200) || \
+	defined(CONFIG_AT91SAM9260) ||  defined(CONFIG_AT91SAM9261) || \
+	defined(CONFIG_AT91SAM9263)
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pio.h>
+#ifdef CONFIG_AT91_LEGACY
+#include <asm/arch/gpio.h>
+#endif
+#endif
+#ifdef	CONFIG_IXP425			/* only valid for IXP425 */
+#include <asm/arch/ixp425.h>
+#endif
+#ifdef CONFIG_LPC2292
+#include <asm/arch/hardware.h>
+#endif
+#if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866)
+#include <asm/io.h>
+#endif
+#include <i2c.h>
+
+/* #define	DEBUG_I2C	*/
+
+#ifdef DEBUG_I2C
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions
+ */
+
+#define RETRIES		0
+
+#define I2C_ACK		0		/* PD_SDA level to ack a byte */
+#define I2C_NOACK	1		/* PD_SDA level to noack a byte */
+
+
+#ifdef DEBUG_I2C
+#define PRINTD(fmt,args...)	do {	\
+	if (gd->have_console)		\
+		printf (fmt ,##args);	\
+	} while (0)
+#else
+#define PRINTD(fmt,args...)
+#endif
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+/*-----------------------------------------------------------------------
+ * Local functions
+ */
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
+static void  send_reset	(void);
+#endif
+static void  send_start	(void);
+static void  send_stop	(void);
+static void  send_ack	(int);
+static int   write_byte	(uchar byte);
+static uchar read_byte	(int);
+
+#if !defined(CONFIG_SYS_I2C_INIT_BOARD)
+/*-----------------------------------------------------------------------
+ * Send a reset sequence consisting of 9 clocks with the data signal high
+ * to clock any confused device back into an idle state.  Also send a
+ * <stop> at the end of the sequence for belts & suspenders.
+ */
+static void send_reset(void)
+{
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
+	int j;
+
+	I2C_SCL(1);
+	I2C_SDA(1);
+#ifdef	I2C_INIT
+	I2C_INIT;
+#endif
+	I2C_TRISTATE;
+	for(j = 0; j < 9; j++) {
+		I2C_SCL(0);
+		I2C_DELAY;
+		I2C_DELAY;
+		I2C_SCL(1);
+		I2C_DELAY;
+		I2C_DELAY;
+	}
+	send_stop();
+	I2C_TRISTATE;
+}
+#endif
+
+/*-----------------------------------------------------------------------
+ * START: High -> Low on SDA while SCL is High
+ */
+static void send_start(void)
+{
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
+
+	I2C_DELAY;
+	I2C_SDA(1);
+	I2C_ACTIVE;
+	I2C_DELAY;
+	I2C_SCL(1);
+	I2C_DELAY;
+	I2C_SDA(0);
+	I2C_DELAY;
+}
+
+/*-----------------------------------------------------------------------
+ * STOP: Low -> High on SDA while SCL is High
+ */
+static void send_stop(void)
+{
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
+
+	I2C_SCL(0);
+	I2C_DELAY;
+	I2C_SDA(0);
+	I2C_ACTIVE;
+	I2C_DELAY;
+	I2C_SCL(1);
+	I2C_DELAY;
+	I2C_SDA(1);
+	I2C_DELAY;
+	I2C_TRISTATE;
+}
+
+/*-----------------------------------------------------------------------
+ * ack should be I2C_ACK or I2C_NOACK
+ */
+static void send_ack(int ack)
+{
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
+
+	I2C_SCL(0);
+	I2C_DELAY;
+	I2C_ACTIVE;
+	I2C_SDA(ack);
+	I2C_DELAY;
+	I2C_SCL(1);
+	I2C_DELAY;
+	I2C_DELAY;
+	I2C_SCL(0);
+	I2C_DELAY;
+}
+
+/*-----------------------------------------------------------------------
+ * Send 8 bits and look for an acknowledgement.
+ */
+static int write_byte(uchar data)
+{
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
+	int j;
+	int nack;
+
+	I2C_ACTIVE;
+	for(j = 0; j < 8; j++) {
+		I2C_SCL(0);
+		I2C_DELAY;
+		I2C_SDA(data & 0x80);
+		I2C_DELAY;
+		I2C_SCL(1);
+		I2C_DELAY;
+		I2C_DELAY;
+
+		data <<= 1;
+	}
+
+	/*
+	 * Look for an <ACK>(negative logic) and return it.
+	 */
+	I2C_SCL(0);
+	I2C_DELAY;
+	I2C_SDA(1);
+	I2C_TRISTATE;
+	I2C_DELAY;
+	I2C_SCL(1);
+	I2C_DELAY;
+	I2C_DELAY;
+	nack = I2C_READ;
+	I2C_SCL(0);
+	I2C_DELAY;
+	I2C_ACTIVE;
+
+	return(nack);	/* not a nack is an ack */
+}
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Functions for multiple I2C bus handling
+ */
+unsigned int i2c_get_bus_num(void)
+{
+	return i2c_bus_num;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+#if defined(CONFIG_I2C_MUX)
+	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
+		i2c_bus_num = bus;
+	} else {
+		int	ret;
+
+		ret = i2x_mux_select_mux(bus);
+		if (ret == 0)
+			i2c_bus_num = bus;
+		else
+			return ret;
+	}
+#else
+	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
+		return -1;
+	i2c_bus_num = bus;
+#endif
+	return 0;
+}
+#endif
+
+/*-----------------------------------------------------------------------
+ * if ack == I2C_ACK, ACK the byte so can continue reading, else
+ * send I2C_NOACK to end the read.
+ */
+static uchar read_byte(int ack)
+{
+	I2C_SOFT_DECLARATIONS	/* intentional without ';' */
+	int  data;
+	int  j;
+
+	/*
+	 * Read 8 bits, MSB first.
+	 */
+	I2C_TRISTATE;
+	I2C_SDA(1);
+	data = 0;
+	for(j = 0; j < 8; j++) {
+		I2C_SCL(0);
+		I2C_DELAY;
+		I2C_SCL(1);
+		I2C_DELAY;
+		data <<= 1;
+		data |= I2C_READ;
+		I2C_DELAY;
+	}
+	send_ack(ack);
+
+	return(data);
+}
+
+/*=====================================================================*/
+/*                         Public Functions                            */
+/*=====================================================================*/
+
+/*-----------------------------------------------------------------------
+ * Initialization
+ */
+void i2c_init (int speed, int slaveaddr)
+{
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
+	/* call board specific i2c bus reset routine before accessing the   */
+	/* environment, which might be in a chip on that bus. For details   */
+	/* about this problem see doc/I2C_Edge_Conditions.                  */
+	i2c_init_board();
+#else
+	/*
+	 * WARNING: Do NOT save speed in a static variable: if the
+	 * I2C routines are called before RAM is initialized (to read
+	 * the DIMM SPD, for instance), RAM won't be usable and your
+	 * system will crash.
+	 */
+	send_reset ();
+#endif
+}
+
+/*-----------------------------------------------------------------------
+ * Probe to see if a chip is present.  Also good for checking for the
+ * completion of EEPROM writes since the chip stops responding until
+ * the write completes (typically 10mSec).
+ */
+int i2c_probe(uchar addr)
+{
+	int rc;
+
+	/*
+	 * perform 1 byte write transaction with just address byte
+	 * (fake write)
+	 */
+	send_start();
+	rc = write_byte ((addr << 1) | 0);
+	send_stop();
+
+	return (rc ? 1 : 0);
+}
+
+/*-----------------------------------------------------------------------
+ * Read bytes
+ */
+int  i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int shift;
+	PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n",
+		chip, addr, alen, buffer, len);
+
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
+	/*
+	 * EEPROM chips that implement "address overflow" are ones
+	 * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	 * address and the extra bits end up in the "chip address"
+	 * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+	 * four 256 byte chips.
+	 *
+	 * Note that we consider the length of the address field to
+	 * still be one byte because the extra address bits are
+	 * hidden in the chip address.
+	 */
+	chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
+
+	PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n",
+		chip, addr);
+#endif
+
+	/*
+	 * Do the addressing portion of a write cycle to set the
+	 * chip's address pointer.  If the address length is zero,
+	 * don't do the normal write cycle to set the address pointer,
+	 * there is no address pointer in this chip.
+	 */
+	send_start();
+	if(alen > 0) {
+		if(write_byte(chip << 1)) {	/* write cycle */
+			send_stop();
+			PRINTD("i2c_read, no chip responded %02X\n", chip);
+			return(1);
+		}
+		shift = (alen-1) * 8;
+		while(alen-- > 0) {
+			if(write_byte(addr >> shift)) {
+				PRINTD("i2c_read, address not <ACK>ed\n");
+				return(1);
+			}
+			shift -= 8;
+		}
+
+		/* Some I2C chips need a stop/start sequence here,
+		 * other chips don't work with a full stop and need
+		 * only a start.  Default behaviour is to send the
+		 * stop/start sequence.
+		 */
+#ifdef CONFIG_SOFT_I2C_READ_REPEATED_START
+		send_start();
+#else
+		send_stop();
+		send_start();
+#endif
+	}
+	/*
+	 * Send the chip address again, this time for a read cycle.
+	 * Then read the data.  On the last byte, we do a NACK instead
+	 * of an ACK(len == 0) to terminate the read.
+	 */
+	write_byte((chip << 1) | 1);	/* read cycle */
+	while(len-- > 0) {
+		*buffer++ = read_byte(len == 0);
+	}
+	send_stop();
+	return(0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write bytes
+ */
+int  i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int shift, failures = 0;
+
+	PRINTD("i2c_write: chip %02X addr %02X alen %d buffer %p len %d\n",
+		chip, addr, alen, buffer, len);
+
+	send_start();
+	if(write_byte(chip << 1)) {	/* write cycle */
+		send_stop();
+		PRINTD("i2c_write, no chip responded %02X\n", chip);
+		return(1);
+	}
+	shift = (alen-1) * 8;
+	while(alen-- > 0) {
+		if(write_byte(addr >> shift)) {
+			PRINTD("i2c_write, address not <ACK>ed\n");
+			return(1);
+		}
+		shift -= 8;
+	}
+
+	while(len-- > 0) {
+		if(write_byte(*buffer++)) {
+			failures++;
+		}
+	}
+	send_stop();
+	return(failures);
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/spr_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/spr_i2c.c
new file mode 100644
index 000000000..eabfe843f
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/spr_i2c.c
@@ -0,0 +1,331 @@
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_i2c.h>
+
+static struct i2c_regs *const i2c_regs_p =
+    (struct i2c_regs *)CONFIG_SYS_I2C_BASE;
+
+/*
+ * set_speed - Set the i2c speed mode (standard, high, fast)
+ * @i2c_spd:	required i2c speed mode
+ *
+ * Set the i2c speed mode (standard, high, fast)
+ */
+static void set_speed(int i2c_spd)
+{
+	unsigned int cntl;
+	unsigned int hcnt, lcnt;
+	unsigned int high, low;
+
+	cntl = (readl(&i2c_regs_p->ic_con) & (~IC_CON_SPD_MSK));
+
+	switch (i2c_spd) {
+	case IC_SPEED_MODE_MAX:
+		cntl |= IC_CON_SPD_HS;
+		high = MIN_HS_SCL_HIGHTIME;
+		low = MIN_HS_SCL_LOWTIME;
+		break;
+
+	case IC_SPEED_MODE_STANDARD:
+		cntl |= IC_CON_SPD_SS;
+		high = MIN_SS_SCL_HIGHTIME;
+		low = MIN_SS_SCL_LOWTIME;
+		break;
+
+	case IC_SPEED_MODE_FAST:
+	default:
+		cntl |= IC_CON_SPD_FS;
+		high = MIN_FS_SCL_HIGHTIME;
+		low = MIN_FS_SCL_LOWTIME;
+		break;
+	}
+
+	writel(cntl, &i2c_regs_p->ic_con);
+
+	hcnt = (IC_CLK * high) / NANO_TO_MICRO;
+	writel(hcnt, &i2c_regs_p->ic_fs_scl_hcnt);
+
+	lcnt = (IC_CLK * low) / NANO_TO_MICRO;
+	writel(lcnt, &i2c_regs_p->ic_fs_scl_lcnt);
+}
+
+/*
+ * i2c_set_bus_speed - Set the i2c speed
+ * @speed:	required i2c speed
+ *
+ * Set the i2c speed.
+ */
+void i2c_set_bus_speed(int speed)
+{
+	if (speed >= I2C_MAX_SPEED)
+		set_speed(IC_SPEED_MODE_MAX);
+	else if (speed >= I2C_FAST_SPEED)
+		set_speed(IC_SPEED_MODE_FAST);
+	else
+		set_speed(IC_SPEED_MODE_STANDARD);
+}
+
+/*
+ * i2c_get_bus_speed - Gets the i2c speed
+ *
+ * Gets the i2c speed.
+ */
+int i2c_get_bus_speed(void)
+{
+	u32 cntl;
+
+	cntl = (readl(&i2c_regs_p->ic_con) & IC_CON_SPD_MSK);
+
+	if (cntl == IC_CON_SPD_HS)
+		return I2C_MAX_SPEED;
+	else if (cntl == IC_CON_SPD_FS)
+		return I2C_FAST_SPEED;
+	else if (cntl == IC_CON_SPD_SS)
+		return I2C_STANDARD_SPEED;
+
+	return 0;
+}
+
+/*
+ * i2c_init - Init function
+ * @speed:	required i2c speed
+ * @slaveadd:	slave address for the spear device
+ *
+ * Initialization function.
+ */
+void i2c_init(int speed, int slaveadd)
+{
+	unsigned int enbl;
+
+	/* Disable i2c */
+	enbl = readl(&i2c_regs_p->ic_enable);
+	enbl &= ~IC_ENABLE_0B;
+	writel(enbl, &i2c_regs_p->ic_enable);
+
+	writel((IC_CON_SD | IC_CON_SPD_FS | IC_CON_MM), &i2c_regs_p->ic_con);
+	writel(IC_RX_TL, &i2c_regs_p->ic_rx_tl);
+	writel(IC_TX_TL, &i2c_regs_p->ic_tx_tl);
+	i2c_set_bus_speed(speed);
+	writel(IC_STOP_DET, &i2c_regs_p->ic_intr_mask);
+	writel(slaveadd, &i2c_regs_p->ic_sar);
+
+	/* Enable i2c */
+	enbl = readl(&i2c_regs_p->ic_enable);
+	enbl |= IC_ENABLE_0B;
+	writel(enbl, &i2c_regs_p->ic_enable);
+}
+
+/*
+ * i2c_setaddress - Sets the target slave address
+ * @i2c_addr:	target i2c address
+ *
+ * Sets the target slave address.
+ */
+static void i2c_setaddress(unsigned int i2c_addr)
+{
+	writel(i2c_addr, &i2c_regs_p->ic_tar);
+}
+
+/*
+ * i2c_flush_rxfifo - Flushes the i2c RX FIFO
+ *
+ * Flushes the i2c RX FIFO
+ */
+static void i2c_flush_rxfifo(void)
+{
+	while (readl(&i2c_regs_p->ic_status) & IC_STATUS_RFNE)
+		readl(&i2c_regs_p->ic_cmd_data);
+}
+
+/*
+ * i2c_wait_for_bb - Waits for bus busy
+ *
+ * Waits for bus busy
+ */
+static int i2c_wait_for_bb(void)
+{
+	unsigned long start_time_bb = get_timer(0);
+
+	while ((readl(&i2c_regs_p->ic_status) & IC_STATUS_MA) ||
+	       !(readl(&i2c_regs_p->ic_status) & IC_STATUS_TFE)) {
+
+		/* Evaluate timeout */
+		if (get_timer(start_time_bb) > (unsigned long)(I2C_BYTE_TO_BB))
+			return 1;
+	}
+
+	return 0;
+}
+
+/* check parameters for i2c_read and i2c_write */
+static int check_params(uint addr, int alen, uchar *buffer, int len)
+{
+	if (buffer == NULL) {
+		printf("Buffer is invalid\n");
+		return 1;
+	}
+
+	if (alen > 1) {
+		printf("addr len %d not supported\n", alen);
+		return 1;
+	}
+
+	if (addr + len > 256) {
+		printf("address out of range\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+static int i2c_xfer_init(uchar chip, uint addr)
+{
+	if (i2c_wait_for_bb()) {
+		printf("Timed out waiting for bus\n");
+		return 1;
+	}
+
+	i2c_setaddress(chip);
+	writel(addr, &i2c_regs_p->ic_cmd_data);
+
+	return 0;
+}
+
+static int i2c_xfer_finish(void)
+{
+	ulong start_stop_det = get_timer(0);
+
+	while (1) {
+		if ((readl(&i2c_regs_p->ic_raw_intr_stat) & IC_STOP_DET)) {
+			readl(&i2c_regs_p->ic_clr_stop_det);
+			break;
+		} else if (get_timer(start_stop_det) > I2C_STOPDET_TO) {
+			break;
+		}
+	}
+
+	if (i2c_wait_for_bb()) {
+		printf("Timed out waiting for bus\n");
+		return 1;
+	}
+
+	i2c_flush_rxfifo();
+
+	/* Wait for read/write operation to complete on actual memory */
+	udelay(10000);
+
+	return 0;
+}
+
+/*
+ * i2c_read - Read from i2c memory
+ * @chip:	target i2c address
+ * @addr:	address to read from
+ * @alen:
+ * @buffer:	buffer for read data
+ * @len:	no of bytes to be read
+ *
+ * Read from i2c memory.
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	unsigned long start_time_rx;
+
+	if (check_params(addr, alen, buffer, len))
+		return 1;
+
+	if (i2c_xfer_init(chip, addr))
+		return 1;
+
+	start_time_rx = get_timer(0);
+	while (len) {
+		writel(IC_CMD, &i2c_regs_p->ic_cmd_data);
+
+		if (readl(&i2c_regs_p->ic_status) & IC_STATUS_RFNE) {
+			*buffer++ = (uchar)readl(&i2c_regs_p->ic_cmd_data);
+			len--;
+			start_time_rx = get_timer(0);
+
+		} else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
+				printf("Timed out. i2c read Failed\n");
+				return 1;
+		}
+	}
+
+	return i2c_xfer_finish();
+}
+
+/*
+ * i2c_write - Write to i2c memory
+ * @chip:	target i2c address
+ * @addr:	address to read from
+ * @alen:
+ * @buffer:	buffer for read data
+ * @len:	no of bytes to be read
+ *
+ * Write to i2c memory.
+ */
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int nb = len;
+	unsigned long start_time_tx;
+
+	if (check_params(addr, alen, buffer, len))
+		return 1;
+
+	if (i2c_xfer_init(chip, addr))
+		return 1;
+
+	start_time_tx = get_timer(0);
+	while (len) {
+		if (readl(&i2c_regs_p->ic_status) & IC_STATUS_TFNF) {
+			writel(*buffer, &i2c_regs_p->ic_cmd_data);
+			buffer++;
+			len--;
+			start_time_tx = get_timer(0);
+
+		} else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
+				printf("Timed out. i2c write Failed\n");
+				return 1;
+		}
+	}
+
+	return i2c_xfer_finish();
+}
+
+/*
+ * i2c_probe - Probe the i2c chip
+ */
+int i2c_probe(uchar chip)
+{
+	u32 tmp;
+
+	/*
+	 * Try to read the first location of the chip.
+	 */
+	return i2c_read(chip, 0, 1, (uchar *)&tmp, 1);
+}
diff --git a/roms/u-boot-sam460ex/drivers/i2c/tsi108_i2c.c b/roms/u-boot-sam460ex/drivers/i2c/tsi108_i2c.c
new file mode 100644
index 000000000..defbba40f
--- /dev/null
+++ b/roms/u-boot-sam460ex/drivers/i2c/tsi108_i2c.c
@@ -0,0 +1,290 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Author: Alex Bounine
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+
+#include <tsi108.h>
+
+#if defined(CONFIG_CMD_I2C)
+
+#define I2C_DELAY	100000
+#undef  DEBUG_I2C
+
+#ifdef DEBUG_I2C
+#define DPRINT(x) printf (x)
+#else
+#define DPRINT(x)
+#endif
+
+/* All functions assume that Tsi108 I2C block is the only master on the bus */
+/* I2C read helper function */
+
+void i2c_init(int speed, int slaveaddr)
+{
+	/*
+	 * The TSI108 has a fixed I2C clock rate and doesn't support slave
+	 * operation.  This function only exists as a stub to fit into the
+	 * U-Boot I2C API.
+	 */
+}
+
+static int i2c_read_byte (
+		uint i2c_chan,	/* I2C channel number: 0 - main, 1 - SDC SPD */
+		uchar chip_addr,/* I2C device address on the bus */
+		uint byte_addr,	/* Byte address within I2C device */
+		uchar * buffer	/* pointer to data buffer */
+		)
+{
+	u32 temp;
+	u32 to_count = I2C_DELAY;
+	u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+	u32 chan_offset = TSI108_I2C_OFFSET;
+
+	DPRINT (("I2C read_byte() %d 0x%02x 0x%02x\n",
+		i2c_chan, chip_addr, byte_addr));
+
+	if (0 != i2c_chan)
+		chan_offset = TSI108_I2C_SDRAM_OFFSET;
+
+	/* Check if I2C operation is in progress */
+	temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
+			  I2C_CNTRL2_START))) {
+		/* Set device address and operation (read = 0) */
+		temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
+		    ((chip_addr >> 3) & 0x0F);
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+		    temp;
+
+		/* Issue the read command
+		 * (at this moment all other parameters are 0
+		 * (size = 1 byte, lane = 0)
+		 */
+
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+		    (I2C_CNTRL2_START);
+
+		/* Wait until operation completed */
+		do {
+			/* Read I2C operation status */
+			temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+			if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
+				if (0 == (temp &
+				     (I2C_CNTRL2_I2C_CFGERR |
+				      I2C_CNTRL2_I2C_TO_ERR))
+				    ) {
+					op_status = TSI108_I2C_SUCCESS;
+
+					temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE +
+							 chan_offset +
+							 I2C_RD_DATA);
+
+					*buffer = (u8) (temp & 0xFF);
+				} else {
+					/* report HW error */
+					op_status = TSI108_I2C_IF_ERROR;
+
+					DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+				}
+
+				break;
+			}
+		} while (to_count--);
+	} else {
+		op_status = TSI108_I2C_IF_BUSY;
+
+		DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+	}
+
+	DPRINT (("I2C read_byte() status: 0x%02x\n", op_status));
+	return op_status;
+}
+
+/*
+ * I2C Read interface as defined in "include/i2c.h" :
+ *   chip_addr: I2C chip address, range 0..127
+ *                  (to read from SPD channel EEPROM use (0xD0 ... 0xD7)
+ *              NOTE: The bit 7 in the chip_addr serves as a channel select.
+ *              This hack is for enabling "i2c sdram" command on Tsi108 boards
+ *              without changes to common code. Used for I2C reads only.
+ *   byte_addr: Memory or register address within the chip
+ *   alen:      Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:    Pointer to destination buffer for data to be read
+ *   len:       How many bytes to read
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_read (uchar chip_addr, uint byte_addr, int alen,
+		uchar * buffer, int len)
+{
+	u32 op_status = TSI108_I2C_PARAM_ERR;
+	u32 i2c_if = 0;
+
+	/* Hack to support second (SPD) I2C controller (SPD EEPROM read only).*/
+	if (0xD0 == (chip_addr & ~0x07)) {
+		i2c_if = 1;
+		chip_addr &= 0x7F;
+	}
+	/* Check for valid I2C address */
+	if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+		while (len--) {
+			op_status = i2c_read_byte(i2c_if, chip_addr, byte_addr++, buffer++);
+
+			if (TSI108_I2C_SUCCESS != op_status) {
+				DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+				break;
+			}
+		}
+	}
+
+	DPRINT (("I2C read() status: 0x%02x\n", op_status));
+	return op_status;
+}
+
+/* I2C write helper function */
+
+static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
+			  uint byte_addr, /* Byte address within I2C device */
+			  uchar * buffer  /*  pointer to data buffer */
+			  )
+{
+	u32 temp;
+	u32 to_count = I2C_DELAY;
+	u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+
+	/* Check if I2C operation is in progress */
+	temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+		/* Place data into the I2C Tx Register */
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_TX_DATA) = (u32) * buffer;
+
+		/* Set device address and operation  */
+		temp =
+		    I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
+		    ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_CNTRL1) = temp;
+
+		/* Issue the write command (at this moment all other parameters
+		 * are 0 (size = 1 byte, lane = 0)
+		 */
+
+		*(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_CNTRL2) = (I2C_CNTRL2_START);
+
+		op_status = TSI108_I2C_TIMEOUT_ERR;
+
+		/* Wait until operation completed */
+		do {
+			/* Read I2C operation status */
+			temp = *(u32 *) (CONFIG_SYS_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+			if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+				if (0 == (temp &
+				     (I2C_CNTRL2_I2C_CFGERR |
+				      I2C_CNTRL2_I2C_TO_ERR))) {
+					op_status = TSI108_I2C_SUCCESS;
+				} else {
+					/* report detected HW error */
+					op_status = TSI108_I2C_IF_ERROR;
+
+					DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+				}
+
+				break;
+			}
+
+		} while (to_count--);
+	} else {
+		op_status = TSI108_I2C_IF_BUSY;
+
+		DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+	}
+
+	return op_status;
+}
+
+/*
+ * I2C Write interface as defined in "include/i2c.h" :
+ *   chip_addr: I2C chip address, range 0..127
+ *   byte_addr: Memory or register address within the chip
+ *   alen:      Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:    Pointer to data to be written
+ *   len:       How many bytes to write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_write (uchar chip_addr, uint byte_addr, int alen, uchar * buffer,
+	      int len)
+{
+	u32 op_status = TSI108_I2C_PARAM_ERR;
+
+	/* Check for valid I2C address */
+	if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+		while (len--) {
+			op_status =
+			    i2c_write_byte (chip_addr, byte_addr++, buffer++);
+
+			if (TSI108_I2C_SUCCESS != op_status) {
+				DPRINT (("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+				break;
+			}
+		}
+	}
+
+	return op_status;
+}
+
+/*
+ * I2C interface function as defined in "include/i2c.h".
+ * Probe the given I2C chip address by reading single byte from offset 0.
+ * Returns 0 if a chip responded, not 0 on failure.
+ */
+
+int i2c_probe (uchar chip)
+{
+	u32 tmp;
+
+	/*
+	 * Try to read the first location of the chip.
+	 * The Tsi108 HW doesn't support sending just the chip address
+	 * and checkong for an <ACK> back.
+	 */
+	return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
+}
+
+#endif