Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 250 insertions, 0 deletions

diff --git a/roms/u-boot-sam460ex/include/configs/sc520_spunk.h b/roms/u-boot-sam460ex/include/configs/sc520_spunk.h
new file mode 100644
index 000000000..cf5633c0d
--- /dev/null
+++ b/roms/u-boot-sam460ex/include/configs/sc520_spunk.h
@@ -0,0 +1,250 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_X86		1	/* This is a X86 CPU		*/
+#define CONFIG_SYS_SC520	1	/* Include support for AMD SC520 */
+#define CONFIG_SYS_SC520_SSI
+
+#define CONFIG_SYS_SDRAM_PRECHARGE_DELAY 6     /* 6T */
+#define CONFIG_SYS_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
+#define CONFIG_SYS_SDRAM_RAS_CAS_DELAY   3     /* 3T */
+
+/* define at most one of these */
+#undef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
+#define CONFIG_SYS_SDRAM_CAS_LATENCY_3T
+
+#define CONFIG_SYS_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
+#undef  CONFIG_SYS_SC520_RESET                 /* use SC520 MMCR's to reset cpu */
+#undef  CONFIG_SYS_SC520_TIMER                 /* use SC520 swtimers */
+#define CONFIG_SYS_GENERIC_TIMER       1       /* use the i8254 PIT timers */
+#undef  CONFIG_SYS_TSC_TIMER                   /* use the Pentium TSC timers */
+#define CONFIG_SYS_PCAT_INTERRUPTS
+#define CONFIG_SYS_NUM_IRQS		16
+
+#define CONFIG_SYS_STACK_SIZE          0x8000  /* Size of bootloader stack */
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+#define CONFIG_LAST_STAGE_INIT    1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
+
+
+#define CONFIG_BAUDRATE		9600
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCMCIA
+#define CONFIG_CMD_EEPROM
+
+
+#define CONFIG_BOOTDELAY	15
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock1 console=ttyS0,9600 " \
+					"mtdparts=phys:7936k(root),256k(uboot) "
+#define CONFIG_BOOTCOMMAND	"setenv bootargs root=/dev/nfs ip=autoconf " \
+					"console=ttyS0,9600 " \
+					"mtdparts=phys:7808k(root),128k(env),256k(uboot);" \
+					"bootp;bootm"
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define	CONFIG_SYS_PROMPT		"boot > "	/* Monitor Command Prompt	*/
+#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CONFIG_SYS_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
+
+#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CONFIG_SYS_HZ			1024		/* incrementer freq: 1kHz */
+
+						/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 4 banks of DRAM */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
+
+
+#define CONFIG_SPI_EEPROM       /* SPI EEPROMs such as AT25010 or AT25640 */
+#define CONFIG_MW_EEPROM        /* MicroWire EEPROMS such as AT93LC46 */
+#define CONFIG_DTT_DS1722       /* Dallas DS1722 SPI Temperature probe */
+
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+
+#if 0
+/* Environment in flash */
+#define CONFIG_ENV_IS_IN_FLASH     1
+# define CONFIG_ENV_ADDR		(0x387a0000)	/* Addr of Environment Sector	*/
+# define CONFIG_ENV_SIZE		0x20000	/* Total Size of Environment Sector (or 0x10000) */
+# define CONFIG_ENV_OFFSET         0
+
+#else
+/* Environment in EEPROM */
+
+# define CONFIG_ENV_IS_IN_EEPROM   1
+# define CONFIG_SPI
+# define CONFIG_SPI_X 1
+# define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment EEPROM	*/
+# define CONFIG_ENV_OFFSET         0x1c00
+
+#endif
+
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_CMD_MTDPARTS
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT		"nor0=sc520_spunk-0"
+#define MTDPARTS_DEFAULT	"mtdparts=sc520_spunk-0:-(jffs2)"
+*/
+
+/*-----------------------------------------------------------------------
+ * Device drivers
+ */
+#define CONFIG_NET_MULTI        /* Multi ethernet cards support */
+#define CONFIG_EEPRO100
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+
+/************************************************************
+ * IDE/ATA stuff
+ ************************************************************/
+#define CONFIG_SYS_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CONFIG_SYS_ATA_BASE_ADDR       0
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x01f0	/* ide0 offset */
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0xe000	/* ide1 offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0	/* data reg offset	*/
+#define CONFIG_SYS_ATA_REG_OFFSET	0	/* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x200	/* alternate register offset */
+
+#define CONFIG_SYS_FIRST_PCMCIA_BUS    1
+
+#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
+#undef  CONFIG_IDE_RESET		/* reset for ide unsupported...	*/
+#undef  CONFIG_IDE_RESET_ROUTINE	/* no special reset function */
+
+#define CONFIG_IDE_TI_CARDBUS
+#define CONFIG_SYS_PCMCIA_CIS_WIN          0x27f00000
+#define CONFIG_SYS_PCMCIA_CIS_WIN_SIZE     0x00100000
+#define CONFIG_SYS_PCMCIA_IO_WIN           0xe000
+#define CONFIG_SYS_PCMCIA_IO_WIN_SIZE      16
+#define CONFIG_PCMCIA_SLOT_A /* TODO: Check this */
+
+/************************************************************
+ * DISK Partition support
+ ************************************************************/
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION /* Experimental */
+
+
+/************************************************************
+ * RTC
+ ***********************************************************/
+#define CONFIG_RTC_MC146818
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * PCI stuff
+ */
+#define CONFIG_PCI                                /* include pci support */
+#define CONFIG_PCI_PNP                            /* pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW
+
+#define	CONFIG_SYS_FIRST_PCI_IRQ   9
+#define	CONFIG_SYS_SECOND_PCI_IRQ  10
+#define	CONFIG_SYS_THIRD_PCI_IRQ   11
+#define	CONFIG_SYS_FORTH_PCI_IRQ   12
+
+#endif	/* __CONFIG_H */