Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 437 insertions, 0 deletions

diff --git a/roms/u-boot-sam460ex/include/configs/utx8245.h b/roms/u-boot-sam460ex/include/configs/utx8245.h
new file mode 100644
index 000000000..1a47aadcf
--- /dev/null
+++ b/roms/u-boot-sam460ex/include/configs/utx8245.h
@@ -0,0 +1,437 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Gregory E. Allen, gallen@arlut.utexas.edu
+ * Matthew E. Karger, karger@arlut.utexas.edu
+ * Applied Research Laboratories, The University of Texas at Austin
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the utx8245 board.
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X		1
+#define CONFIG_MPC8245		1
+#define CONFIG_UTX8245		1
+#define DEBUG				1
+
+#define CONFIG_IDENT_STRING     " [UTX5] "
+
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		57600
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_BOOTDELAY	2
+#define CONFIG_AUTOBOOT_PROMPT	"autoboot in %d seconds\n", bootdelay
+#define CONFIG_BOOTCOMMAND	"run nfsboot"	/* autoboot command	*/
+#define CONFIG_BOOTARGS		"root=/dev/ram console=ttyS0,57600" /* RAMdisk */
+#define CONFIG_ETHADDR		00:AA:00:14:00:05	/* UTX5 */
+#define CONFIG_SERVERIP		10.8.17.105	/* Spree */
+#define CONFIG_SYS_TFTP_LOADADDR	10000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"kernel_addr=FFA00000\0" \
+	"ramdisk_addr=FF800000\0" \
+	"u-boot_startaddr=FFB00000\0" \
+	"u-boot_endaddr=FFB2FFFF\0" \
+	"nfsargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/nfs rw \
+nfsroot=${nfsrootip}:${rootpath} ip=dhcp\0" \
+	"ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram0\0" \
+	"smargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/mtdblock1 ro\0" \
+	"fwargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/sda2 ro\0" \
+	"nfsboot=run nfsargs;bootm ${kernel_addr}\0" \
+	"ramboot=run ramargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
+	"smboot=run smargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
+	"fwboot=run fwargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
+	"update_u-boot=tftp ${loadaddr} /bdi2000/u-boot.bin;protect off \
+${u-boot_startaddr} ${u-boot_endaddr};era ${u-boot_startaddr} \
+${u-boot_endaddr};cp.b ${loadaddr} ${u-boot_startaddr} ${filesize};\
+protect on ${u-boot_startaddr} ${u-boot_endaddr}"
+
+#define CONFIG_ENV_OVERWRITE
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
+#define CONFIG_SYS_PROMPT	"=> "			/* Monitor Command Prompt	*/
+#define CONFIG_SYS_CBSIZE	256				/* Console I/O Buffer Size	*/
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
+
+
+/*-----------------------------------------------------------------------
+ * PCI configuration
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI				/* include pci support		*/
+#undef CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_NET_MULTI
+#define CONFIG_EEPRO100
+#define CONFIG_SYS_RX_ETH_BUFFER	8               /* use 8 rx buffer on eepro100  */
+#define CONFIG_EEPRO100_SROM_WRITE
+
+#define PCI_ENET0_IOADDR	0xF0000000
+#define PCI_ENET0_MEMADDR	0xF0000000
+
+#define PCI_FIREWIRE_IOADDR		0xF1000000
+#define PCI_FIREWIRE_MEMADDR	0xF1000000
+/*
+#define PCI_ENET0_IOADDR	0xFE000000
+#define PCI_ENET0_MEMADDR	0x80000000
+
+#define PCI_FIREWIRE_IOADDR	0x81000000
+#define PCI_FIREWIRE_MEMADDR	0x81000000
+*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE	    0x00000000
+#define CONFIG_SYS_MAX_RAM_SIZE    0x10000000	/* 256MB  */
+/*#define CONFIG_SYS_VERY_BIG_RAM	1 */
+
+/* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector
+ * is actually located at FFF00100.  Therefore, U-Boot is
+ * physically located at 0xFFB0_0000, but is also mirrored at
+ * 0xFFF0_0000.
+ */
+#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
+
+#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
+
+#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+
+#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CONFIG_SYS_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+
+/*#define CONFIG_SYS_DRAM_TEST		1 */
+#define CONFIG_SYS_MEMTEST_START   0x00003000	/* memtest works on	0...256 MB	*/
+#define CONFIG_SYS_MEMTEST_END	    0x0ff8ffa7	/* in SDRAM, skips exception */
+										/* vectors and U-Boot */
+
+
+/*--------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ *------------------------------------------------------------------*/
+#define CONFIG_SYS_INIT_DATA_SIZE    128	/* Size in bytes reserved for */
+									/* initial data */
+#define CONFIG_SYS_INIT_RAM_ADDR     0x40000000
+#define CONFIG_SYS_INIT_RAM_END      0x1000
+#define CONFIG_SYS_INIT_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+
+/*--------------------------------------------------------------------
+ * NS16550 Configuration
+ *------------------------------------------------------------------*/
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+
+#if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2)
+#	define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
+#else
+#	define CONFIG_SYS_NS16550_CLK 33000000
+#endif
+
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4600)
+#define CONFIG_SYS_NS16550_COM3	0xFF000000
+#define CONFIG_SYS_NS16550_COM4	0xFF000008
+
+/*--------------------------------------------------------------------
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ *------------------------------------------------------------------*/
+
+#define CONFIG_SYS_CLK_FREQ  33000000
+#define CONFIG_SYS_HZ				1000
+
+/*#define CONFIG_SYS_ETH_DEV_FN	     0x7800 */
+/*#define CONFIG_SYS_ETH_IOBASE	     0x00104000 */
+
+/*--------------------------------------------------------------------
+ * I2C Configuration
+ *------------------------------------------------------------------*/
+#if 1
+#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
+#undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#endif
+
+#define CONFIG_RTC_PCF8563	1		/* enable I2C support for */
+									/* Philips PCF8563 RTC */
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* Philips PCF8563 RTC address */
+
+/*--------------------------------------------------------------------
+ *	Memory Control Configuration Register values
+ *	- see sec. 4.12 of MPC8245 UM
+ *------------------------------------------------------------------*/
+
+/**** MCCR1 ****/
+#define CONFIG_SYS_ROMNAL	    0
+#define CONFIG_SYS_ROMFAL	    10		/* (tacc=70ns)*mem_freq - 2,
+									mem_freq = 100MHz */
+
+#define CONFIG_SYS_BANK7_ROW	0		/* SDRAM bank 7-0 row address */
+#define CONFIG_SYS_BANK6_ROW	0		/*	bit count */
+#define CONFIG_SYS_BANK5_ROW	0
+#define CONFIG_SYS_BANK4_ROW	0
+#define CONFIG_SYS_BANK3_ROW	0
+#define CONFIG_SYS_BANK2_ROW	0
+#define CONFIG_SYS_BANK1_ROW	2
+#define CONFIG_SYS_BANK0_ROW	2
+
+/**** MCCR2, refresh interval clock cycles ****/
+#define CONFIG_SYS_REFINT	    480	    /* 33 MHz SDRAM clock was 480 */
+
+/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
+#define CONFIG_SYS_BSTOPRE	    1023	/* burst to precharge[0..9], */
+								/* sets open page interval */
+
+/**** MCCR3 ****/
+#define CONFIG_SYS_REFREC	    7	    /* Refresh to activate interval, trc */
+
+/**** MCCR4 ****/
+#define CONFIG_SYS_PRETOACT	    2	    /* trp */
+#define CONFIG_SYS_ACTTOPRE	    7	    /* trcd + (burst length - 1) + trdl */
+#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
+#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type, sequential */
+#define CONFIG_SYS_ACTORW		2		/* trcd min */
+#define CONFIG_SYS_DBUS_SIZE2		1		/* set for 8-bit RCS1, clear for 32,64 */
+#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
+#define CONFIG_SYS_EXTROM	    0			/* we don't need extended ROM space */
+#define CONFIG_SYS_REGDIMM	    0
+
+/* calculate according to formula in sec. 6-22 of 8245 UM */
+#define CONFIG_SYS_PGMAX           50		/* how long the 8245 retains the */
+									/* currently accessed page in memory */
+									/* was 45 */
+
+#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note */
+								/* bits 7,6, and 3-0 MUST be 0 */
+
+#if 0
+#define CONFIG_SYS_DLL_MAX_DELAY	0x04
+#else
+#define CONFIG_SYS_DLL_MAX_DELAY	0
+#endif
+#if 0							/* need for 33MHz SDRAM */
+#define CONFIG_SYS_DLL_EXTEND	0x80
+#else
+#define CONFIG_SYS_DLL_EXTEND	0
+#endif
+#define CONFIG_SYS_PCI_HOLD_DEL 0x20
+
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these values to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8245 user manual.
+ */
+
+#define CONFIG_SYS_BANK0_START	    0x00000000
+#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE/2 - 1)
+#define CONFIG_SYS_BANK0_ENABLE    1
+#define CONFIG_SYS_BANK1_START	    CONFIG_SYS_MAX_RAM_SIZE/2
+#define CONFIG_SYS_BANK1_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
+#define CONFIG_SYS_BANK1_ENABLE    1
+#define CONFIG_SYS_BANK2_START	    0x3ff00000		/* not available in this design */
+#define CONFIG_SYS_BANK2_END	    0x3fffffff
+#define CONFIG_SYS_BANK2_ENABLE    0
+#define CONFIG_SYS_BANK3_START	    0x3ff00000
+#define CONFIG_SYS_BANK3_END	    0x3fffffff
+#define CONFIG_SYS_BANK3_ENABLE    0
+#define CONFIG_SYS_BANK4_START	    0x3ff00000
+#define CONFIG_SYS_BANK4_END	    0x3fffffff
+#define CONFIG_SYS_BANK4_ENABLE    0
+#define CONFIG_SYS_BANK5_START	    0x3ff00000
+#define CONFIG_SYS_BANK5_END	    0x3fffffff
+#define CONFIG_SYS_BANK5_ENABLE    0
+#define CONFIG_SYS_BANK6_START	    0x3ff00000
+#define CONFIG_SYS_BANK6_END	    0x3fffffff
+#define CONFIG_SYS_BANK6_ENABLE    0
+#define CONFIG_SYS_BANK7_START	    0x3ff00000
+#define CONFIG_SYS_BANK7_END	    0x3fffffff
+#define CONFIG_SYS_BANK7_ENABLE    0
+
+/*--------------------------------------------------------------------*/
+/* 4.4 - Output Driver Control Register */
+/*--------------------------------------------------------------------*/
+#define CONFIG_SYS_ODCR	    0xe5
+
+/*--------------------------------------------------------------------*/
+/* 4.8 - Error Handling Registers */
+/*-------------------------------CONFIG_SYS_SDMODE_BURSTLEN-------------------------------------*/
+#define CONFIG_SYS_ERRENR1	0x11	/* enable SDRAM refresh overflow error */
+
+/* SDRAM 0-256 MB */
+#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+/*#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
+#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* stack in dcache */
+#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+
+#define CONFIG_SYS_IBAT2L  (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U  (CONFIG_SYS_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI memory */
+/*#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
+/*#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
+
+/*Flash, config addrs, etc. */
+#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ *----------------------------------------------------------------------*/
+#define CONFIG_SYS_FLASH_BASE	    0xFF800000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1			/* Max number of flash banks */
+
+/*	NOTE: environment is not EMBEDDED in the u-boot code.
+	It's stored in flash in its own separate sector.  */
+#define CONFIG_ENV_IS_IN_FLASH	    1
+
+#if 1	/* AMD AM29LV033C */
+#define CONFIG_SYS_MAX_FLASH_SECT	64		/* Max number of sectors in one bank */
+#define CONFIG_ENV_ADDR		0xFFBF0000	/* flash sector SA63 */
+#define CONFIG_ENV_SECT_SIZE	(64*1024)	/* Size of the Environment Sector */
+#else	/* AMD AM29LV116D */
+#define CONFIG_SYS_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
+#define CONFIG_ENV_ADDR		0xFF9FA000	/* flash sector SA33 */
+#define CONFIG_ENV_SECT_SIZE	(8*1024)	/* Size of the Environment Sector */
+#endif /* #if */
+
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE		/* Size of the Environment */
+#define CONFIG_ENV_OFFSET		0			/* starting right at the beginning */
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+#undef CONFIG_SYS_RAMBOOT
+#else
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#if defined(CONFIG_CMD_KGDB)
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+
+#endif	/* __CONFIG_H */