Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

74 files changed, 12580 insertions, 0 deletions

diff --git a/roms/u-boot-sam460ex/post/Makefile b/roms/u-boot-sam460ex/post/Makefile
new file mode 100644
index 000000000..769e9c639
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/Makefile
@@ -0,0 +1,76 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(OBJTREE)/include/autoconf.mk
+
+LIB				= libpost.a
+GPLIB-$(CONFIG_HAS_POST)	+= libgenpost.a
+COBJS-$(CONFIG_HAS_POST)	+= post.o tests.o
+
+SPLIB-$(CONFIG_HAS_POST) = drivers/libpostdrivers.a
+SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d lib_$(ARCH) ]; then echo \
+			    "lib_$(ARCH)/libpost$(ARCH).a"; fi)
+SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d lib_$(ARCH)/fpu ]; then echo \
+			    "lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
+SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d cpu/$(CPU) ]; then echo \
+			    "cpu/$(CPU)/libpost$(CPU).a"; fi)
+SPLIB-$(CONFIG_HAS_POST) += $(shell if [ -d board/$(BOARD) ]; then echo \
+			    "board/$(BOARD)/libpost$(BOARD).a"; fi)
+
+GPLIB	:= $(addprefix $(obj),$(GPLIB-y))
+SPLIB	:= $(addprefix $(obj),$(SPLIB-y))
+COBJS	:= $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+LIB	:= $(obj)$(LIB)
+
+all:	$(LIB)
+
+postdeps:
+	@for lib in $(SPLIB-y) ; do \
+		$(MAKE) -C `dirname $$lib` all ; \
+	done
+
+# generic POST library
+$(GPLIB): $(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+# specific POST libraries
+$(SPLIB): $(obj).depend postdeps
+	$(MAKE) -C $(dir $(subst $(obj),,$@))
+
+# the POST lib archive
+$(LIB): $(GPLIB) $(SPLIB)
+	(echo create $(LIB); for lib in $(GPLIB) $(SPLIB) ; \
+	 do echo addlib $$lib; done; echo save) \
+	| $(AR) -M
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/roms/u-boot-sam460ex/post/board/lwmon/Makefile b/roms/u-boot-sam460ex/post/board/lwmon/Makefile
new file mode 100644
index 000000000..d2932bed1
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(OBJTREE)/include/autoconf.mk
+
+LIB	= libpostlwmon.a
+
+COBJS-$(CONFIG_HAS_POST)	+= sysmon.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/board/lwmon/sysmon.c b/roms/u-boot-sam460ex/post/board/lwmon/sysmon.c
new file mode 100644
index 000000000..fc828b2e5
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon/sysmon.c
@@ -0,0 +1,313 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <post.h>
+#include <common.h>
+
+/*
+ * SYSMON test
+ *
+ * This test performs the system hardware monitoring.
+ * The test passes when all the following voltages and temperatures
+ * are within allowed ranges:
+ *
+ * Board temperature
+ * Front temperature
+ * +3.3V CPU logic
+ * +5V logic
+ * +12V PCMCIA
+ * +12V CCFL
+ * +5V standby
+ *
+ * CCFL is not enabled if temperature values are not within allowed ranges
+ *
+ * See the list off all parameters in the sysmon_table below
+ */
+
+#include <post.h>
+#include <watchdog.h>
+#include <i2c.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int sysmon_temp_invalid = 0;
+
+/* #define DEBUG */
+
+typedef struct sysmon_s sysmon_t;
+typedef struct sysmon_table_s sysmon_table_t;
+
+static void sysmon_lm87_init (sysmon_t * this);
+static void sysmon_pic_init (sysmon_t * this);
+static uint sysmon_i2c_read (sysmon_t * this, uint addr);
+static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr);
+static void sysmon_ccfl_disable (sysmon_table_t * this);
+static void sysmon_ccfl_enable (sysmon_table_t * this);
+
+struct sysmon_s
+{
+	uchar	chip;
+	void	(*init)(sysmon_t *);
+	uint	(*read)(sysmon_t *, uint);
+};
+
+static sysmon_t sysmon_lm87 =
+	{CONFIG_SYS_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read};
+static sysmon_t sysmon_lm87_sgn =
+	{CONFIG_SYS_I2C_SYSMON_ADDR, sysmon_lm87_init, sysmon_i2c_read_sgn};
+static sysmon_t sysmon_pic =
+	{CONFIG_SYS_I2C_PICIO_ADDR, sysmon_pic_init, sysmon_i2c_read};
+
+static sysmon_t * sysmon_list[] =
+{
+	&sysmon_lm87,
+	&sysmon_lm87_sgn,
+	&sysmon_pic,
+	NULL
+};
+
+struct sysmon_table_s
+{
+	char *		name;
+	char *		unit_name;
+	sysmon_t *	sysmon;
+	void		(*exec_before)(sysmon_table_t *);
+	void		(*exec_after)(sysmon_table_t *);
+
+	int		unit_precision;
+	int		unit_div;
+	int		unit_min;
+	int		unit_max;
+	uint		val_mask;
+	uint		val_min;
+	uint		val_max;
+	int		val_valid;
+	uint		val_min_alt;
+	uint		val_max_alt;
+	int		val_valid_alt;
+	uint		addr;
+};
+
+static sysmon_table_t sysmon_table[] =
+{
+    {"Board temperature", " C", &sysmon_lm87_sgn, NULL, sysmon_ccfl_disable,
+     1, 1, -128, 127, 0xFF, 0x58, 0xD5, 0, 0x6C, 0xC6, 0, 0x27},
+
+    {"Front temperature", " C", &sysmon_lm87, NULL, sysmon_ccfl_disable,
+     1, 100, -27316, 8984, 0xFF, 0xA4, 0xFC, 0, 0xB2, 0xF1, 0, 0x29},
+
+    {"+3.3V CPU logic", "V", &sysmon_lm87, NULL, NULL,
+     100, 1000, 0, 4386, 0xFF, 0xB6, 0xC9, 0, 0xB6, 0xC9, 0, 0x22},
+
+    {"+ 5 V logic", "V", &sysmon_lm87, NULL, NULL,
+     100, 1000, 0, 6630, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x23},
+
+    {"+12 V PCMCIA", "V", &sysmon_lm87, NULL, NULL,
+     100, 1000, 0, 15460, 0xFF, 0xBC, 0xD0, 0, 0xBC, 0xD0, 0, 0x21},
+
+    {"+12 V CCFL", "V", &sysmon_lm87, NULL, sysmon_ccfl_enable,
+     100, 1000, 0, 15900, 0xFF, 0xB6, 0xCA, 0, 0xB6, 0xCA, 0, 0x24},
+
+    {"+ 5 V standby", "V", &sysmon_pic, NULL, NULL,
+     100, 1000, 0, 6040, 0xFF, 0xC8, 0xDE, 0, 0xC8, 0xDE, 0, 0x7C},
+};
+static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]);
+
+static int conversion_done = 0;
+
+
+int sysmon_init_f (void)
+{
+	sysmon_t ** l;
+	ulong reg;
+
+	/* Power on CCFL, PCMCIA */
+	reg = pic_read  (0x60);
+	reg |= 0x09;
+	pic_write (0x60, reg);
+
+	for (l = sysmon_list; *l; l++) {
+		(*l)->init(*l);
+	}
+
+	return 0;
+}
+
+void sysmon_reloc (void)
+{
+	/* Do nothing for now, sysmon_reloc() is required by the sysmon post */
+}
+
+static char *sysmon_unit_value (sysmon_table_t *s, uint val)
+{
+	static char buf[32];
+	int unit_val =
+	    s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask;
+	char *p, sign;
+	int dec, frac;
+
+	if (val == -1) {
+		return "I/O ERROR";
+	}
+
+	if (unit_val < 0) {
+		sign = '-';
+		unit_val = -unit_val;
+	} else {
+		sign = '+';
+	}
+
+	p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
+
+
+	frac = unit_val % s->unit_div;
+
+	frac /= (s->unit_div / s->unit_precision);
+
+	dec = s->unit_precision;
+
+	if (dec != 1) {
+		*p++ = '.';
+	}
+	for (dec /= 10; dec != 0; dec /= 10) {
+		*p++ = '0' + (frac / dec) % 10;
+	}
+	strcpy(p, s->unit_name);
+
+	return buf;
+}
+
+static void sysmon_lm87_init (sysmon_t * this)
+{
+	uchar val;
+
+	/* Detect LM87 chip */
+	if (i2c_read(this->chip, 0x40, 1, &val, 1) || (val & 0x80) != 0 ||
+	    i2c_read(this->chip, 0x3E, 1, &val, 1) || val != 0x02) {
+		printf("Error: LM87 not found at 0x%02X\n", this->chip);
+		return;
+	}
+
+	/* Configure pins 5,6 as AIN */
+	val = 0x03;
+	if (i2c_write(this->chip, 0x16, 1, &val, 1)) {
+		printf("Error: can't write LM87 config register\n");
+		return;
+	}
+
+	/* Start monitoring */
+	val = 0x01;
+	if (i2c_write(this->chip, 0x40, 1, &val, 1)) {
+		printf("Error: can't write LM87 config register\n");
+		return;
+	}
+}
+
+static void sysmon_pic_init (sysmon_t * this)
+{
+}
+
+static uint sysmon_i2c_read (sysmon_t * this, uint addr)
+{
+	uchar val;
+	uint res = i2c_read(this->chip, addr, 1, &val, 1);
+
+	return res == 0 ? val : -1;
+}
+
+static uint sysmon_i2c_read_sgn (sysmon_t * this, uint addr)
+{
+	uchar val;
+	return i2c_read(this->chip, addr, 1, &val, 1) == 0 ?
+		128 + (signed char)val : -1;
+}
+
+static void sysmon_ccfl_disable (sysmon_table_t * this)
+{
+	if (!this->val_valid_alt) {
+		sysmon_temp_invalid = 1;
+	}
+}
+
+static void sysmon_ccfl_enable (sysmon_table_t * this)
+{
+	ulong reg;
+
+	if (!sysmon_temp_invalid) {
+		reg = pic_read  (0x60);
+		reg |= 0x06;
+		pic_write (0x60, reg);
+	}
+}
+
+int sysmon_post_test (int flags)
+{
+	int res = 0;
+	sysmon_table_t * t;
+	uint val;
+
+	/*
+	 * The A/D conversion on the LM87 sensor takes 300 ms.
+	 */
+	if (! conversion_done) {
+		while (post_time_ms(gd->post_init_f_time) < 300) WATCHDOG_RESET ();
+		conversion_done = 1;
+	}
+
+	for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
+		if (t->exec_before) {
+			t->exec_before(t);
+		}
+
+		val = t->sysmon->read(t->sysmon, t->addr);
+		if (val != -1) {
+			t->val_valid = val >= t->val_min && val <= t->val_max;
+			t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
+		} else {
+			t->val_valid = 0;
+			t->val_valid_alt = 0;
+		}
+
+		if (t->exec_after) {
+			t->exec_after(t);
+		}
+
+		if ((!t->val_valid) || (flags & POST_MANUAL)) {
+			printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
+			printf("allowed range");
+			printf(" %-8s ..", sysmon_unit_value(t, t->val_min));
+			printf(" %-8s", sysmon_unit_value(t, t->val_max));
+			printf("     %s\n", t->val_valid ? "OK" : "FAIL");
+		}
+
+		if (!t->val_valid) {
+			res = -1;
+		}
+	}
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */
diff --git a/roms/u-boot-sam460ex/post/board/lwmon5/Makefile b/roms/u-boot-sam460ex/post/board/lwmon5/Makefile
new file mode 100644
index 000000000..4e95515ef
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon5/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+#
+# Developed for DENX Software Engineering GmbH
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+include $(OBJTREE)/include/autoconf.mk
+
+LIB	= libpostlwmon5.a
+
+COBJS-$(CONFIG_HAS_POST)	+= sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/board/lwmon5/dsp.c b/roms/u-boot-sam460ex/post/board/lwmon5/dsp.c
new file mode 100644
index 000000000..0e6d9084a
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon5/dsp.c
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_DSP
+#include <asm/io.h>
+
+/* This test verifies DSP status bits in FPGA */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DSP_STATUS_REG 0xC4000008
+
+int dsp_post_test(int flags)
+{
+	uint   read_value;
+	int    ret;
+
+	ret = 0;
+	read_value = in_be32((void *)DSP_STATUS_REG) & 0x3;
+	if (read_value != 0x3) {
+		post_log("\nDSP status read %08X\n", read_value);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_DSP */
diff --git a/roms/u-boot-sam460ex/post/board/lwmon5/dspic.c b/roms/u-boot-sam460ex/post/board/lwmon5/dspic.c
new file mode 100644
index 000000000..ff2ed0566
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon5/dspic.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* There are two tests for dsPIC currently implemented:
+ * 1. dsPIC ready test. Done in board_early_init_f(). Only result verified here.
+ * 2. dsPIC POST result test.  This test gets dsPIC POST codes and version.
+ */
+
+#include <post.h>
+
+#include <i2c.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DSPIC_POST_ERROR_REG	0x800
+#define DSPIC_SYS_ERROR_REG	0x802
+#define DSPIC_VERSION_REG	0x804
+
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
+
+/* Verify that dsPIC ready test done early at hw init passed ok */
+int dspic_init_post_test(int flags)
+{
+	if (in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) & CONFIG_SYS_DSPIC_TEST_MASK) {
+		post_log("dsPIC init test failed\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC1 */
+
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
+/* Read a register from the dsPIC. */
+int dspic_read(ushort reg)
+{
+	uchar buf[2];
+
+	if (i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, 2, buf, 2))
+		return -1;
+
+	return (uint)((buf[0] << 8) | buf[1]);
+}
+
+/* Verify error codes regs, display version */
+int dspic_post_test(int flags)
+{
+	int data;
+	int ret = 0;
+
+	post_log("\n");
+	data = dspic_read(DSPIC_VERSION_REG);
+	if (data == -1) {
+		post_log("dsPIC : failed read version\n");
+		ret = 1;
+	} else {
+		post_log("dsPIC version: %u.%u\n",
+			(data >> 8) & 0xFF, data & 0xFF);
+	}
+
+	data = dspic_read(DSPIC_POST_ERROR_REG);
+	if (data != 0) ret = 1;
+	if (data == -1) {
+		post_log("dsPIC : failed read POST code\n");
+	} else {
+		post_log("dsPIC POST code 0x%04X\n", data);
+	}
+
+	data = dspic_read(DSPIC_SYS_ERROR_REG);
+	if (data == -1) {
+		post_log("dsPIC : failed read system error\n");
+		ret = 1;
+	} else {
+		post_log("dsPIC SYS-ERROR code: 0x%04X\n", data);
+	}
+
+	return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC2 */
diff --git a/roms/u-boot-sam460ex/post/board/lwmon5/fpga.c b/roms/u-boot-sam460ex/post/board/lwmon5/fpga.c
new file mode 100644
index 000000000..2b842908d
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon5/fpga.c
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+/* This test performs testing of FPGA SCRATCH register,
+ * gets FPGA version and run get_ram_size() on FPGA memory
+ */
+
+#include <post.h>
+
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define FPGA_SCRATCH_REG	0xC4000050
+#define FPGA_VERSION_REG	0xC4000040
+#define FPGA_RAM_START		0xC4200000
+#define FPGA_RAM_END		0xC4203FFF
+#define FPGA_STAT		0xC400000C
+
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC3
+
+/* Testpattern for fpga memorytest */
+static uint pattern[] = {
+	0x55555555,
+	0xAAAAAAAA,
+	0xAA5555AA,
+	0x55AAAA55,
+	0x0
+};
+
+static int one_scratch_test(uint value)
+{
+	uint read_value;
+	int ret = 0;
+
+	out_be32((void *)FPGA_SCRATCH_REG, value);
+	/* read other location (protect against data lines capacity) */
+	ret = in_be16((void *)FPGA_VERSION_REG);
+	/* verify test pattern */
+	read_value = in_be32((void *)FPGA_SCRATCH_REG);
+	if (read_value != value) {
+		post_log("FPGA SCRATCH test failed write %08X, read %08X\n",
+			value, read_value);
+		ret = 1;
+	}
+
+	return ret;
+}
+
+/* FPGA Memory-pattern-test */
+static int fpga_mem_test(void * address)
+{
+	int ret = 1;
+	uint read_value;
+	uint old_value;
+	uint i = 0;
+	/* save content */
+	old_value = in_be32(address);
+
+	while (pattern[i] != 0) {
+		out_be32(address, pattern[i]);
+		/* read other location (protect against data lines capacity) */
+		ret = in_be16((void *)FPGA_VERSION_REG);
+		/* verify test pattern */
+		read_value = in_be32(address);
+
+		if (read_value != pattern[i]) {
+			post_log("FPGA Memory test failed.");
+			post_log(" write %08X, read %08X at address %08X\n",
+				pattern[i], read_value, address);
+			ret = 1;
+			goto out;
+		}
+		i++;
+	}
+
+	ret = 0;
+out:
+	out_be32(address, old_value);
+	return ret;
+}
+/* Verify FPGA, get version & memory size */
+int fpga_post_test(int flags)
+{
+	uint   address;
+	uint   old_value;
+	ushort version;
+	uint   read_value;
+	int    ret = 0;
+
+	post_log("\n");
+	old_value = in_be32((void *)FPGA_SCRATCH_REG);
+
+	if (one_scratch_test(0x55555555))
+		ret = 1;
+	if (one_scratch_test(0xAAAAAAAA))
+		ret = 1;
+
+	out_be32((void *)FPGA_SCRATCH_REG, old_value);
+
+	version = in_be16((void *)FPGA_VERSION_REG);
+	post_log("FPGA : version %u.%u\n",
+		(version >> 8) & 0xFF, version & 0xFF);
+
+	/* Enable write to FPGA RAM */
+	out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000);
+
+	read_value = get_ram_size((void *)CONFIG_SYS_FPGA_BASE_1, 0x4000);
+	post_log("FPGA RAM size: %d bytes\n", read_value);
+
+	for (address = 0; address < 0x1000; address++) {
+		if (fpga_mem_test((void *)(FPGA_RAM_START + 4*address)) == 1) {
+			ret = 1;
+			goto out;
+		}
+	}
+
+out:
+	return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC3 */
diff --git a/roms/u-boot-sam460ex/post/board/lwmon5/gdc.c b/roms/u-boot-sam460ex/post/board/lwmon5/gdc.c
new file mode 100644
index 000000000..eb16e36fc
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon5/gdc.c
@@ -0,0 +1,96 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+/* This test attempts to verify board GDC. A scratch register tested, then
+ * simple memory test (get_ram_size()) run over GDC memory.
+ */
+
+#include <post.h>
+
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GDC_SCRATCH_REG 0xC1FF8044
+#define GDC_VERSION_REG 0xC1FF8084
+#define GDC_RAM_START   0xC0000000
+#define GDC_RAM_END     0xC2000000
+
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC4
+
+static int gdc_test_reg_one(uint value)
+{
+	int ret;
+	uint read_value;
+
+	/* write test pattern */
+	out_be32((void *)GDC_SCRATCH_REG, value);
+	/* read other location (protect against data lines capacity) */
+	ret = in_be32((void *)GDC_RAM_START);
+	/* verify test pattern */
+	read_value = in_be32((void *)GDC_SCRATCH_REG);
+	if (read_value != value) {
+		post_log("GDC SCRATCH test failed write %08X, read %08X\n",
+			value, read_value);
+	}
+
+	return (read_value != value);
+}
+
+/* Verify GDC, get memory size */
+int gdc_post_test(int flags)
+{
+	uint   old_value;
+	int    ret = 0;
+
+	post_log("\n");
+	old_value = in_be32((void *)GDC_SCRATCH_REG);
+
+	/*
+	 * GPIOC2 register behaviour: the LIME graphics processor has a
+	 * maximum of 5 GPIO ports that can be used in this hardware
+	 * configuration. Thus only the  bits  for these 5 GPIOs can be
+	 * activated in the GPIOC2 register. All other bits will always be
+	 * read as zero.
+	 */
+	if (gdc_test_reg_one(0x00150015))
+		ret = 1;
+	if (gdc_test_reg_one(0x000A000A))
+		ret = 1;
+
+	out_be32((void *)GDC_SCRATCH_REG, old_value);
+
+	old_value = in_be32((void *)GDC_VERSION_REG);
+	post_log("GDC chip version %u.%u, year %04X\n",
+		(old_value >> 8) & 0xFF, old_value & 0xFF,
+		(old_value >> 16) & 0xFFFF);
+
+	old_value = get_ram_size((void *)GDC_RAM_START,
+				 GDC_RAM_END - GDC_RAM_START);
+	post_log("GDC RAM size: %d bytes\n", old_value);
+
+	return ret;
+}
+#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC4 */
diff --git a/roms/u-boot-sam460ex/post/board/lwmon5/sysmon.c b/roms/u-boot-sam460ex/post/board/lwmon5/sysmon.c
new file mode 100644
index 000000000..9c49d0e64
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon5/sysmon.c
@@ -0,0 +1,255 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <post.h>
+#include <common.h>
+
+/*
+ * SYSMON test
+ *
+ * This test performs the system hardware monitoring.
+ * The test passes when all the following voltages and temperatures
+ * are within allowed ranges:
+ *
+ * Temperature		  -40 .. +90 C
+ * +5V			+4.50 .. +5.50 V
+ * +5V standby		+3.50 .. +5.50 V
+ *
+ * LCD backlight is not enabled if temperature values are not within
+ * allowed ranges (-30 .. + 80). The brightness of backlite can be
+ * controlled by setting "brightness" enviroment variable. Default value is 50%
+ *
+ * See the list of all parameters in the sysmon_table below
+ */
+
+#include <post.h>
+#include <watchdog.h>
+#include <i2c.h>
+
+#if defined(CONFIG_VIDEO)
+#include <mb862xx.h>
+#endif
+
+#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* from dspic.c */
+extern int dspic_read(ushort reg);
+
+#define REG_TEMPERATURE			0x12BC
+#define REG_VOLTAGE_5V			0x12CA
+#define REG_VOLTAGE_5V_STANDBY		0x12C6
+
+#define TEMPERATURE_MIN			(-40)	/* degr. C */
+#define TEMPERATURE_MAX			(+90)	/* degr. C */
+#define TEMPERATURE_DISPLAY_MIN		(-35)	/* degr. C */
+#define TEMPERATURE_DISPLAY_MAX		(+85)	/* degr. C */
+
+#define VOLTAGE_5V_MIN			(+4500)	/* mV */
+#define VOLTAGE_5V_MAX			(+5500)	/* mV */
+
+#define VOLTAGE_5V_STANDBY_MIN		(+3500)	/* mV */
+#define VOLTAGE_5V_STANDBY_MAX		(+5500)	/* mV */
+
+typedef struct sysmon_s sysmon_t;
+typedef struct sysmon_table_s sysmon_table_t;
+
+static void sysmon_dspic_init (sysmon_t * this);
+static int sysmon_dspic_read (sysmon_t * this, uint addr);
+static void sysmon_backlight_disable (sysmon_table_t * this);
+
+struct sysmon_s
+{
+	uchar	chip;
+	void	(*init)(sysmon_t *);
+	int	(*read)(sysmon_t *, uint);
+};
+
+static sysmon_t sysmon_dspic =
+	{CONFIG_SYS_I2C_DSPIC_IO_ADDR, sysmon_dspic_init, sysmon_dspic_read};
+
+static sysmon_t * sysmon_list[] =
+{
+	&sysmon_dspic,
+	NULL
+};
+
+struct sysmon_table_s
+{
+	char *		name;
+	char *		unit_name;
+	sysmon_t *	sysmon;
+	void		(*exec_before)(sysmon_table_t *);
+	void		(*exec_after)(sysmon_table_t *);
+
+	int		unit_precision;
+	int		unit_div;
+	int		unit_min;
+	int		unit_max;
+	uint		val_mask;
+	uint		val_min;
+	uint		val_max;
+	int		val_valid;
+	uint		val_min_alt;
+	uint		val_max_alt;
+	int		val_valid_alt;
+	uint		addr;
+};
+
+static sysmon_table_t sysmon_table[] =
+{
+	{
+	"Temperature", " C", &sysmon_dspic, NULL, sysmon_backlight_disable,
+	1, 1, -32768, 32767, 0xFFFF,
+	0x8000 + TEMPERATURE_MIN,	  0x8000 + TEMPERATURE_MAX,	    0,
+	0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0,
+	REG_TEMPERATURE,
+	},
+
+	{
+	"+ 5 V", "V", &sysmon_dspic, NULL, NULL,
+	100, 1000, -0x8000, 0x7FFF, 0xFFFF,
+	0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0,
+	0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0,
+	REG_VOLTAGE_5V,
+	},
+
+	{
+	"+ 5 V standby", "V", &sysmon_dspic, NULL, NULL,
+	100, 1000, -0x8000, 0x7FFF, 0xFFFF,
+	0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0,
+	0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0,
+	REG_VOLTAGE_5V_STANDBY,
+	},
+};
+static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]);
+
+int sysmon_init_f (void)
+{
+	sysmon_t ** l;
+
+	for (l = sysmon_list; *l; l++)
+		(*l)->init(*l);
+
+	return 0;
+}
+
+void sysmon_reloc (void)
+{
+	/* Do nothing for now, sysmon_reloc() is required by the sysmon post */
+}
+
+static char *sysmon_unit_value (sysmon_table_t *s, uint val)
+{
+	static char buf[32];
+	char *p, sign;
+	int decimal, frac;
+	int unit_val;
+
+	unit_val = s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask;
+
+	if (val == -1)
+		return "I/O ERROR";
+
+	if (unit_val < 0) {
+		sign = '-';
+		unit_val = -unit_val;
+	} else
+		sign = '+';
+
+	p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
+
+
+	frac = unit_val % s->unit_div;
+
+	frac /= (s->unit_div / s->unit_precision);
+
+	decimal = s->unit_precision;
+
+	if (decimal != 1)
+		*p++ = '.';
+	for (decimal /= 10; decimal != 0; decimal /= 10)
+		*p++ = '0' + (frac / decimal) % 10;
+	strcpy(p, s->unit_name);
+
+	return buf;
+}
+
+static void sysmon_dspic_init (sysmon_t * this)
+{
+}
+
+static int sysmon_dspic_read (sysmon_t * this, uint addr)
+{
+	int res = dspic_read(addr);
+
+	/* To fit into the table range we should add 0x8000 */
+	return (res == -1) ? -1 : (res + 0x8000);
+}
+
+static void sysmon_backlight_disable (sysmon_table_t * this)
+{
+#if defined(CONFIG_VIDEO)
+	board_backlight_switch(this->val_valid_alt);
+#endif
+}
+
+int sysmon_post_test (int flags)
+{
+	int res = 0;
+	sysmon_table_t * t;
+	int val;
+
+	for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
+		if (t->exec_before)
+			t->exec_before(t);
+
+		val = t->sysmon->read(t->sysmon, t->addr);
+		if (val != -1) {
+			t->val_valid = val >= t->val_min && val <= t->val_max;
+			t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
+		} else {
+			t->val_valid = 0;
+			t->val_valid_alt = 0;
+		}
+
+		if (t->exec_after)
+			t->exec_after(t);
+
+		if ((!t->val_valid) || (flags & POST_MANUAL)) {
+			printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
+			printf("allowed range");
+			printf(" %-8s ..", sysmon_unit_value(t, t->val_min));
+			printf(" %-8s", sysmon_unit_value(t, t->val_max));
+			printf("     %s\n", t->val_valid ? "OK" : "FAIL");
+		}
+
+		if (!t->val_valid)
+			res = 1;
+	}
+
+	return res;
+}
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */
diff --git a/roms/u-boot-sam460ex/post/board/lwmon5/watchdog.c b/roms/u-boot-sam460ex/post/board/lwmon5/watchdog.c
new file mode 100644
index 000000000..44f048832
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/lwmon5/watchdog.c
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* This test verifies if the reason of last reset was an abnormal voltage
+ * condition, than it performs watchdog test, measuing time required to
+ * trigger watchdog reset.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
+
+#include <watchdog.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+static uint watchdog_magic_read(void)
+{
+	return in_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR) &
+		CONFIG_SYS_WATCHDOG_MAGIC_MASK;
+}
+
+static void watchdog_magic_write(uint value)
+{
+	out_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR, value |
+		(in_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR) &
+			~CONFIG_SYS_WATCHDOG_MAGIC_MASK));
+}
+
+int sysmon1_post_test(int flags)
+{
+	if (gpio_read_in_bit(CONFIG_SYS_GPIO_SYSMON_STATUS) == 0) {
+		/*
+		 * 3.1. GPIO62 is low
+		 * Assuming system voltage failure.
+		 */
+		post_log("Abnormal voltage detected (GPIO62)\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+int lwmon5_watchdog_post_test(int flags)
+{
+	/* On each reset scratch register 1 should be tested,
+	 * but first test GPIO62:
+	 */
+	if (!(flags & POST_MANUAL) && sysmon1_post_test(flags)) {
+		/* 3.1. GPIO62 is low
+		 * Assuming system voltage failure.
+		 */
+		/* 3.1.1. Set scratch register 1 to 0x0000xxxx */
+		watchdog_magic_write(0);
+		/* 3.1.2. Mark test as failed due to voltage?! */
+		return 1;
+	}
+
+	if (watchdog_magic_read() != CONFIG_SYS_WATCHDOG_MAGIC) {
+		/* 3.2. Scratch register 1 differs from magic value 0x1248xxxx
+		 * Assuming PowerOn
+		 */
+		int ints;
+		ulong base;
+		ulong time;
+
+		/* 3.2.1. Set magic value to scratch register */
+		watchdog_magic_write(CONFIG_SYS_WATCHDOG_MAGIC);
+
+		ints = disable_interrupts ();
+		/* 3.2.2. strobe watchdog once */
+		WATCHDOG_RESET();
+		out_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR, 0);
+		/* 3.2.3. save time of strobe in scratch register 2 */
+		base = post_time_ms (0);
+
+		/* 3.2.4. Wait for 150 ms (enough for reset to happen) */
+		while ((time = post_time_ms (base)) < 150)
+			out_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR, time);
+		if (ints)
+			enable_interrupts ();
+
+		/* 3.2.5. Reset didn't happen. - Set 0x0000xxxx
+		 * into scratch register 1
+		 */
+		watchdog_magic_write(0);
+		/* 3.2.6. Mark test as failed. */
+		post_log("hw watchdog time : %u ms, failed ", time);
+		return 2;
+	} else {
+		/* 3.3. Scratch register matches magic value 0x1248xxxx
+		 * Assume this is watchdog-initiated reset
+		 */
+		ulong time;
+		/* 3.3.1. So, the test succeed, save measured time to syslog. */
+		time = in_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR);
+		post_log("hw watchdog time : %u ms, passed ", time);
+		/* 3.3.2. Set scratch register 1 to 0x0000xxxx */
+		watchdog_magic_write(0);
+		return 0;
+	}
+	return -1;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */
diff --git a/roms/u-boot-sam460ex/post/board/netta/Makefile b/roms/u-boot-sam460ex/post/board/netta/Makefile
new file mode 100644
index 000000000..8a8578f43
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/netta/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(OBJTREE)/include/autoconf.mk
+
+LIB	= libpostnetta.a
+
+COBJS-$(CONFIG_HAS_POST)	+= codec.o dsp.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/board/netta/codec.c b/roms/u-boot-sam460ex/post/board/netta/codec.c
new file mode 100644
index 000000000..a095a9179
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/netta/codec.c
@@ -0,0 +1,45 @@
+/*
+ * (C) Copyright 2004
+ * Pantelis Antoniou, Intracom S.A. , panto@intracom.gr
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CODEC test
+ *
+ * This test verifies the connection and performs a memory test
+ * on any connected codec(s). The meat of the work is done
+ * in the board specific function.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CODEC
+
+extern int board_post_codec(int flags);
+
+int codec_post_test (int flags)
+{
+	return board_post_codec(flags);
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CODEC */
diff --git a/roms/u-boot-sam460ex/post/board/netta/dsp.c b/roms/u-boot-sam460ex/post/board/netta/dsp.c
new file mode 100644
index 000000000..438ced553
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/netta/dsp.c
@@ -0,0 +1,45 @@
+/*
+ * (C) Copyright 2004
+ * Pantelis Antoniou, Intracom S.A. , panto@intracom.gr
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * DSP test
+ *
+ * This test verifies the connection and performs a memory test
+ * on any connected DSP(s). The meat of the work is done
+ * in the board specific function.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_DSP
+
+extern int board_post_dsp(int flags);
+
+int dsp_post_test (int flags)
+{
+	return board_post_dsp(flags);
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_DSP */
diff --git a/roms/u-boot-sam460ex/post/board/pdm360ng/Makefile b/roms/u-boot-sam460ex/post/board/pdm360ng/Makefile
new file mode 100644
index 000000000..d1538f672
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/pdm360ng/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2010 DENX Software Engineering
+# Anatolij Gustschin, agust@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(OBJTREE)/include/autoconf.mk
+
+LIB	= libpostpdm360ng.a
+
+COBJS-$(CONFIG_HAS_POST)	+= coproc_com.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/board/pdm360ng/coproc_com.c b/roms/u-boot-sam460ex/post/board/pdm360ng/coproc_com.c
new file mode 100644
index 000000000..075535213
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/board/pdm360ng/coproc_com.c
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2010 DENX Software Engineering,
+ * Anatolij Gustschin, agust@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Co-Processor communication POST
+ */
+#include <common.h>
+#include <post.h>
+#include <serial.h>
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+/*
+ * Actually the termination sequence of the coprocessor
+ * commands is "\r\n" (CR LF), but here we use a side effect of
+ * the putc() routine of the serial driver which checks for LF
+ * and sends CR before sending LF. Therefore the termination
+ * sequence in the command below is only "\n".
+ * "alive" string is the coprocessor response for ping command
+ * and not a command, therefore it is terminated with "\r\n".
+ */
+char alive[] = "$AL;38\r\n";
+char ping[] = "$PI;2C\n";
+
+int coprocessor_post_test(int flags)
+{
+	struct stdio_dev *cop_port;
+	int ret;
+	char buf[10];
+
+	/* Test IO Coprocessor communication */
+	cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
+	if (!cop_port)
+		return -1;
+
+	write_port(cop_port, ping);
+	udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
+
+	memset(buf, 0, sizeof(buf));
+	ret = read_port(cop_port, buf, sizeof(buf));
+	close_port(4);
+	if (ret <= 0) {
+		post_log("Error: Can't read IO Coprocessor port.\n");
+		return -1;
+	}
+
+	if (strcmp(buf, alive)) {
+		post_log("Error: IO-Cop. resp.: %s\n", buf);
+		return -1;
+	}
+
+	/* Test WD Coprocessor communication */
+	cop_port = open_port(1, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
+	if (!cop_port) {
+		post_log("Error: Can't open WD Coprocessor port.\n");
+		return -1;
+	}
+
+	write_port(cop_port, ping);
+	udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
+
+	memset(buf, 0, sizeof(buf));
+	ret = read_port(cop_port, buf, sizeof(buf));
+	close_port(1);
+	if (ret <= 0) {
+		post_log("Error: Can't read WD Coprocessor port.\n");
+		return -1;
+	}
+
+	if (strcmp(buf, alive)) {
+		post_log("Error: WD-Cop. resp.: %s\n", buf);
+		return -1;
+	}
+
+	return 0;
+}
+#endif	/* CONFIG_SERIAL_MULTI */
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc83xx/Makefile b/roms/u-boot-sam460ex/post/cpu/mpc83xx/Makefile
new file mode 100644
index 000000000..86d8784ca
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc83xx/Makefile
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2002-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(OBJTREE)/include/autoconf.mk
+
+LIB	= libpostmpc83xx.a
+
+AOBJS-$(CONFIG_HAS_POST)	+=
+COBJS-$(CONFIG_HAS_POST)	+= ecc.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc83xx/ecc.c b/roms/u-boot-sam460ex/post/cpu/mpc83xx/ecc.c
new file mode 100644
index 000000000..de8733938
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc83xx/ecc.c
@@ -0,0 +1,166 @@
+/*
+ * (C) Copyright 2010
+ * Eastman Kodak Company, <www.kodak.com>
+ * Michael Zaidman, <michael.zaidman@kodak.com>
+ *
+ * The code is based on the cpu/mpc83xx/ecc.c written by
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_ECC
+/*
+ * We use the RAW I/O accessors where possible in order to
+ * achieve performance goal, since the test's execution time
+ * affects the board start up time.
+ */
+static inline void ecc_clear(ddr83xx_t *ddr)
+{
+	/* Clear capture registers */
+	__raw_writel(0, &ddr->capture_address);
+	__raw_writel(0, &ddr->capture_data_hi);
+	__raw_writel(0, &ddr->capture_data_lo);
+	__raw_writel(0, &ddr->capture_ecc);
+	__raw_writel(0, &ddr->capture_attributes);
+
+	/* Clear SBEC and set SBET to 1 */
+	out_be32(&ddr->err_sbe, 1 << ECC_ERROR_MAN_SBET_SHIFT);
+
+	/* Clear Error Detect register */
+	out_be32(&ddr->err_detect, ECC_ERROR_DETECT_MME |\
+			ECC_ERROR_DETECT_MBE |\
+			ECC_ERROR_DETECT_SBE |\
+			ECC_ERROR_DETECT_MSE);
+
+	isync();
+}
+
+int ecc_post_test(int flags)
+{
+	int ret = 0;
+	int int_state;
+	int errbit;
+	u32 pattern[2], writeback[2], retval[2];
+	ddr83xx_t *ddr = &((immap_t *)CONFIG_SYS_IMMR)->ddr;
+	volatile u64 *addr = (u64 *)CONFIG_SYS_POST_ECC_START_ADDR;
+
+	/* The pattern is written into memory to generate error */
+	pattern[0] = 0xfedcba98UL;
+	pattern[1] = 0x76543210UL;
+
+	/* After injecting error, re-initialize the memory with the value */
+	writeback[0] = ~pattern[0];
+	writeback[1] = ~pattern[1];
+
+	/* Check if ECC is enabled */
+	if (__raw_readl(&ddr->err_disable) & ECC_ERROR_ENABLE) {
+		debug("DDR's ECC is not enabled, skipping the ECC POST.\n");
+		return 0;
+	}
+
+	int_state = disable_interrupts();
+	icache_enable();
+
+#ifdef CONFIG_DDR_32BIT
+	/* It seems like no one really uses the CONFIG_DDR_32BIT mode */
+#error "Add ECC POST support for CONFIG_DDR_32BIT here!"
+#else
+	for (addr = (u64*)CONFIG_SYS_POST_ECC_START_ADDR, errbit=0;
+	     addr < (u64*)CONFIG_SYS_POST_ECC_STOP_ADDR; addr++, errbit++ ) {
+
+		WATCHDOG_RESET();
+
+		ecc_clear(ddr);
+
+		/* Enable error injection */
+		setbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
+		sync();
+		isync();
+
+		/* Set bit to be injected */
+		if (errbit < 32) {
+			__raw_writel(1 << errbit, &ddr->data_err_inject_lo);
+			__raw_writel(0, &ddr->data_err_inject_hi);
+		} else {
+			__raw_writel(0, &ddr->data_err_inject_lo);
+			__raw_writel(1<<(errbit-32), &ddr->data_err_inject_hi);
+		}
+		sync();
+		isync();
+
+		/* Write memory location injecting SBE */
+		ppcDWstore((u32*)addr, pattern);
+		sync();
+
+		/* Disable error injection */
+		clrbits_be32(&ddr->ecc_err_inject, ECC_ERR_INJECT_EIEN);
+		sync();
+		isync();
+
+		/* Data read should generate SBE */
+		ppcDWload((u32*)addr, retval);
+		sync();
+
+		if (!(__raw_readl(&ddr->err_detect) & ECC_ERROR_DETECT_SBE) ||
+			(__raw_readl(&ddr->data_err_inject_hi) !=
+			(__raw_readl(&ddr->capture_data_hi) ^ pattern[0])) ||
+			(__raw_readl(&ddr->data_err_inject_lo) !=
+			(__raw_readl(&ddr->capture_data_lo) ^ pattern[1]))) {
+
+			post_log("ECC failed to detect SBE error at %08x, "
+				"SBE injection mask %08x-%08x, wrote "
+				"%08x-%08x, read %08x-%08x\n", addr,
+				ddr->data_err_inject_hi,
+				ddr->data_err_inject_lo,
+				pattern[0], pattern[1],
+				retval[0], retval[1]);
+
+			printf("ERR_DETECT Reg: %08x\n", ddr->err_detect);
+			printf("ECC CAPTURE_DATA Reg: %08x-%08x\n",
+				ddr->capture_data_hi, ddr->capture_data_lo);
+			ret = 1;
+			break;
+		}
+
+		/* Re-initialize the ECC memory */
+		ppcDWstore((u32*)addr, writeback);
+		sync();
+		isync();
+
+		errbit %= 63;
+	}
+#endif /* !CONFIG_DDR_32BIT */
+
+	ecc_clear(ddr);
+
+	icache_disable();
+
+	if (int_state)
+		enable_interrupts();
+
+	return ret;
+}
+#endif
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc8xx/Makefile b/roms/u-boot-sam460ex/post/cpu/mpc8xx/Makefile
new file mode 100644
index 000000000..162924f6b
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc8xx/Makefile
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2002-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(OBJTREE)/include/autoconf.mk
+
+LIB	= libpostmpc8xx.a
+
+AOBJS-$(CONFIG_HAS_POST)	+= cache_8xx.o
+COBJS-$(CONFIG_HAS_POST)	+= cache.o ether.o spr.o uart.o usb.o watchdog.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc8xx/cache.c b/roms/u-boot-sam460ex/post/cpu/mpc8xx/cache.c
new file mode 100644
index 000000000..06cb501bd
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc8xx/cache.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* Cache test
+ *
+ * This test verifies the CPU data and instruction cache using
+ * several test scenarios.
+ */
+
+#include <post.h>
+#include <watchdog.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
+
+#define CACHE_POST_SIZE	1024
+
+extern int cache_post_test1 (char *, unsigned int);
+extern int cache_post_test2 (char *, unsigned int);
+extern int cache_post_test3 (char *, unsigned int);
+extern int cache_post_test4 (char *, unsigned int);
+extern int cache_post_test5 (void);
+extern int cache_post_test6 (void);
+
+int cache_post_test (int flags)
+{
+	int ints = disable_interrupts ();
+	int res = 0;
+	static char ta[CACHE_POST_SIZE + 0xf];
+	char *testarea = (char *) (((unsigned long) ta + 0xf) & ~0xf);
+
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test1 (testarea, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test2 (testarea, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test3 (testarea, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test4 (testarea, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test5 ();
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test6 ();
+
+	WATCHDOG_RESET ();
+	if (ints)
+		enable_interrupts ();
+	return res;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc8xx/cache_8xx.S b/roms/u-boot-sam460ex/post/cpu/mpc8xx/cache_8xx.S
new file mode 100644
index 000000000..097eedb42
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc8xx/cache_8xx.S
@@ -0,0 +1,493 @@
+/*
+ *  Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_MPC823) || \
+    defined(CONFIG_MPC850) || \
+    defined(CONFIG_MPC855) || \
+    defined(CONFIG_MPC860) || \
+    defined(CONFIG_MPC862)
+
+#include <post.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
+
+	.text
+
+cache_post_dinvalidate:
+	lis	r10, IDC_INVALL@h
+	mtspr	DC_CST, r10
+	blr
+
+cache_post_iinvalidate:
+	lis	r10, IDC_INVALL@h
+	mtspr	IC_CST, r10
+	isync
+	blr
+
+cache_post_ddisable:
+	lis	r10, IDC_DISABLE@h
+	mtspr	DC_CST, r10
+	blr
+
+cache_post_dwb:
+	lis	r10, IDC_ENABLE@h
+	mtspr	DC_CST, r10
+	lis	r10, DC_CFWT@h
+	mtspr	DC_CST, r10
+	blr
+
+cache_post_dwt:
+	lis	r10, IDC_ENABLE@h
+	mtspr	DC_CST, r10
+	lis	r10, DC_SFWT@h
+	mtspr	DC_CST, r10
+	blr
+
+cache_post_idisable:
+	lis	r10, IDC_DISABLE@h
+	mtspr	IC_CST, r10
+	isync
+	blr
+
+cache_post_ienable:
+	lis	r10, IDC_ENABLE@h
+	mtspr	IC_CST, r10
+	isync
+	blr
+
+cache_post_iunlock:
+	lis	r10, IDC_UNALL@h
+	mtspr	IC_CST, r10
+	isync
+	blr
+
+cache_post_ilock:
+	mtspr	IC_ADR, r3
+	lis	r10, IDC_LDLCK@h
+	mtspr	IC_CST, r10
+	isync
+	blr
+
+/*
+ * turn on the data cache
+ * switch the data cache to write-back or write-through mode
+ * invalidate the data cache
+ * write the negative pattern to a cached area
+ * read the area
+ *
+ * The negative pattern must be read at the last step
+ */
+	.global cache_post_test1
+cache_post_test1:
+	mflr	r0
+	stw	r0, 4(r1)
+
+	stwu	r3, -4(r1)
+	stwu	r4, -4(r1)
+
+	bl	cache_post_dwb
+	bl	cache_post_dinvalidate
+
+	/* Write the negative pattern to the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	li	r0, 0xff
+	lwz	r3, 4(r1)
+	subi	r3, r3, 1
+1:
+	stbu	r0, 1(r3)
+	bdnz	1b
+
+	/* Read the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	lwz	r4, 4(r1)
+	subi	r4, r4, 1
+	li	r3, 0
+1:
+	lbzu	r0, 1(r4)
+	cmpli	cr0, r0, 0xff
+	beq	2f
+	li	r3, -1
+	b	3f
+2:
+	bdnz	1b
+3:
+
+	bl	cache_post_ddisable
+	bl	cache_post_dinvalidate
+
+	addi	r1, r1, 8
+
+	lwz	r0, 4(r1)
+	mtlr	r0
+	blr
+
+/*
+ * turn on the data cache
+ * switch the data cache to write-back or write-through mode
+ * invalidate the data cache
+ * write the zero pattern to a cached area
+ * turn off the data cache
+ * write the negative pattern to the area
+ * turn on the data cache
+ * read the area
+ *
+ * The negative pattern must be read at the last step
+ */
+	.global cache_post_test2
+cache_post_test2:
+	mflr	r0
+	stw	r0, 4(r1)
+
+	stwu	r3, -4(r1)
+	stwu	r4, -4(r1)
+
+	bl	cache_post_dwb
+	bl	cache_post_dinvalidate
+
+	/* Write the zero pattern to the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	li	r0, 0
+	lwz	r3, 4(r1)
+	subi	r3, r3, 1
+1:
+	stbu	r0, 1(r3)
+	bdnz	1b
+
+	bl	cache_post_ddisable
+
+	/* Write the negative pattern to the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	li	r0, 0xff
+	lwz	r3, 4(r1)
+	subi	r3, r3, 1
+1:
+	stbu	r0, 1(r3)
+	bdnz	1b
+
+	bl	cache_post_dwb
+
+	/* Read the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	lwz	r4, 4(r1)
+	subi	r4, r4, 1
+	li	r3, 0
+1:
+	lbzu	r0, 1(r4)
+	cmpli	cr0, r0, 0xff
+	beq	2f
+	li	r3, -1
+	b	3f
+2:
+	bdnz	1b
+3:
+
+	bl	cache_post_ddisable
+	bl	cache_post_dinvalidate
+
+	addi	r1, r1, 8
+
+	lwz	r0, 4(r1)
+	mtlr	r0
+	blr
+
+/*
+ * turn on the data cache
+ * switch the data cache to write-through mode
+ * invalidate the data cache
+ * write the zero pattern to a cached area
+ * flush the data cache
+ * write the negative pattern to the area
+ * turn off the data cache
+ * read the area
+ *
+ * The negative pattern must be read at the last step
+ */
+	.global cache_post_test3
+cache_post_test3:
+	mflr	r0
+	stw	r0, 4(r1)
+
+	stwu	r3, -4(r1)
+	stwu	r4, -4(r1)
+
+	bl	cache_post_ddisable
+	bl	cache_post_dinvalidate
+
+	/* Write the zero pattern to the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	li	r0, 0
+	lwz	r3, 4(r1)
+	subi	r3, r3, 1
+1:
+	stbu	r0, 1(r3)
+	bdnz	1b
+
+	bl	cache_post_dwt
+	bl	cache_post_dinvalidate
+
+	/* Write the negative pattern to the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	li	r0, 0xff
+	lwz	r3, 4(r1)
+	subi	r3, r3, 1
+1:
+	stbu	r0, 1(r3)
+	bdnz	1b
+
+	bl	cache_post_ddisable
+	bl	cache_post_dinvalidate
+
+	/* Read the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	lwz	r4, 4(r1)
+	subi	r4, r4, 1
+	li	r3, 0
+1:
+	lbzu	r0, 1(r4)
+	cmpli	cr0, r0, 0xff
+	beq	2f
+	li	r3, -1
+	b	3f
+2:
+	bdnz	1b
+3:
+
+	addi	r1, r1, 8
+
+	lwz	r0, 4(r1)
+	mtlr	r0
+	blr
+
+/*
+ * turn on the data cache
+ * switch the data cache to write-back mode
+ * invalidate the data cache
+ * write the negative pattern to a cached area
+ * flush the data cache
+ * write the zero pattern to the area
+ * invalidate the data cache
+ * read the area
+ *
+ * The negative pattern must be read at the last step
+ */
+	.global cache_post_test4
+cache_post_test4:
+	mflr	r0
+	stw	r0, 4(r1)
+
+	stwu	r3, -4(r1)
+	stwu	r4, -4(r1)
+
+	bl	cache_post_ddisable
+	bl	cache_post_dinvalidate
+
+	/* Write the negative pattern to the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	li	r0, 0xff
+	lwz	r3, 4(r1)
+	subi	r3, r3, 1
+1:
+	stbu	r0, 1(r3)
+	bdnz	1b
+
+	bl	cache_post_dwb
+	bl	cache_post_dinvalidate
+
+	/* Write the zero pattern to the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	li	r0, 0
+	lwz	r3, 4(r1)
+	subi	r3, r3, 1
+1:
+	stbu	r0, 1(r3)
+	bdnz	1b
+
+	bl	cache_post_ddisable
+	bl	cache_post_dinvalidate
+
+	/* Read the test area */
+	lwz	r0, 0(r1)
+	mtctr	r0
+	lwz	r4, 4(r1)
+	subi	r4, r4, 1
+	li	r3, 0
+1:
+	lbzu	r0, 1(r4)
+	cmpli	cr0, r0, 0xff
+	beq	2f
+	li	r3, -1
+	b	3f
+2:
+	bdnz	1b
+3:
+
+	addi	r1, r1, 8
+
+	lwz	r0, 4(r1)
+	mtlr	r0
+	blr
+
+cache_post_test5_1:
+	li	r3, 0
+cache_post_test5_2:
+	li	r3, -1
+
+/*
+ * turn on the instruction cache
+ * unlock the entire instruction cache
+ * invalidate the instruction cache
+ * lock a branch instruction in the instruction cache
+ * replace the branch instruction with "nop"
+ * jump to the branch instruction
+ * check that the branch instruction was executed
+*/
+	.global cache_post_test5
+cache_post_test5:
+	mflr	r0
+	stw	r0, 4(r1)
+
+	bl	cache_post_ienable
+	bl	cache_post_iunlock
+	bl	cache_post_iinvalidate
+
+	/* Compute r9 = cache_post_test5_reloc */
+	bl	cache_post_test5_reloc
+cache_post_test5_reloc:
+	mflr	r9
+
+	/* Copy the test instruction to cache_post_test5_data */
+	lis	r3, (cache_post_test5_1 - cache_post_test5_reloc)@h
+	ori	r3, r3, (cache_post_test5_1 - cache_post_test5_reloc)@l
+	add	r3, r3, r9
+	lis	r4, (cache_post_test5_data - cache_post_test5_reloc)@h
+	ori	r4, r4, (cache_post_test5_data - cache_post_test5_reloc)@l
+	add	r4, r4, r9
+	lwz	r0, 0(r3)
+	stw	r0, 0(r4)
+
+	bl	cache_post_iinvalidate
+
+	/* Lock the branch instruction */
+	lis	r3, (cache_post_test5_data - cache_post_test5_reloc)@h
+	ori	r3, r3, (cache_post_test5_data - cache_post_test5_reloc)@l
+	add	r3, r3, r9
+	bl	cache_post_ilock
+
+	/* Replace the test instruction */
+	lis	r3, (cache_post_test5_2 - cache_post_test5_reloc)@h
+	ori	r3, r3, (cache_post_test5_2 - cache_post_test5_reloc)@l
+	add	r3, r3, r9
+	lis	r4, (cache_post_test5_data - cache_post_test5_reloc)@h
+	ori	r4, r4, (cache_post_test5_data - cache_post_test5_reloc)@l
+	add	r4, r4, r9
+	lwz	r0, 0(r3)
+	stw	r0, 0(r4)
+
+	bl	cache_post_iinvalidate
+
+	/* Execute to the test instruction */
+cache_post_test5_data:
+	nop
+
+	bl	cache_post_iunlock
+
+	lwz	r0, 4(r1)
+	mtlr	r0
+	blr
+
+cache_post_test6_1:
+	li	r3, -1
+cache_post_test6_2:
+	li	r3, 0
+
+/*
+ * turn on the instruction cache
+ * unlock the entire instruction cache
+ * invalidate the instruction cache
+ * lock a branch instruction in the instruction cache
+ * replace the branch instruction with "nop"
+ * jump to the branch instruction
+ * check that the branch instruction was executed
+ */
+	.global cache_post_test6
+cache_post_test6:
+	mflr	r0
+	stw	r0, 4(r1)
+
+	bl	cache_post_ienable
+	bl	cache_post_iunlock
+	bl	cache_post_iinvalidate
+
+	/* Compute r9 = cache_post_test6_reloc */
+	bl	cache_post_test6_reloc
+cache_post_test6_reloc:
+	mflr	r9
+
+	/* Copy the test instruction to cache_post_test6_data */
+	lis	r3, (cache_post_test6_1 - cache_post_test6_reloc)@h
+	ori	r3, r3, (cache_post_test6_1 - cache_post_test6_reloc)@l
+	add	r3, r3, r9
+	lis	r4, (cache_post_test6_data - cache_post_test6_reloc)@h
+	ori	r4, r4, (cache_post_test6_data - cache_post_test6_reloc)@l
+	add	r4, r4, r9
+	lwz	r0, 0(r3)
+	stw	r0, 0(r4)
+
+	bl	cache_post_iinvalidate
+
+	/* Replace the test instruction */
+	lis	r3, (cache_post_test6_2 - cache_post_test6_reloc)@h
+	ori	r3, r3, (cache_post_test6_2 - cache_post_test6_reloc)@l
+	add	r3, r3, r9
+	lis	r4, (cache_post_test6_data - cache_post_test6_reloc)@h
+	ori	r4, r4, (cache_post_test6_data - cache_post_test6_reloc)@l
+	add	r4, r4, r9
+	lwz	r0, 0(r3)
+	stw	r0, 0(r4)
+
+	bl	cache_post_iinvalidate
+
+	/* Execute to the test instruction */
+cache_post_test6_data:
+	nop
+
+	lwz	r0, 4(r1)
+	mtlr	r0
+	blr
+
+#endif /* CONFIG_MPC823 || MPC850 || MPC855 || MPC860 */
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc8xx/ether.c b/roms/u-boot-sam460ex/post/cpu/mpc8xx/ether.c
new file mode 100644
index 000000000..43ea81772
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc8xx/ether.c
@@ -0,0 +1,633 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Ethernet test
+ *
+ * The Serial Communication Controllers (SCC) listed in ctlr_list array below
+ * are tested in the loopback ethernet mode.
+ * The controllers are configured accordingly and several packets
+ * are transmitted. The configurable test parameters are:
+ *   MIN_PACKET_LENGTH - minimum size of packet to transmit
+ *   MAX_PACKET_LENGTH - maximum size of packet to transmit
+ *   TEST_NUM - number of tests
+ */
+
+#include <post.h>
+#if CONFIG_POST & CONFIG_SYS_POST_ETHER
+#if defined(CONFIG_8xx)
+#include <commproc.h>
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#else
+#error "Apparently a bad configuration, please fix."
+#endif
+
+#include <command.h>
+#include <net.h>
+#include <serial.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MIN_PACKET_LENGTH	64
+#define MAX_PACKET_LENGTH	256
+#define TEST_NUM		1
+
+#define CTLR_SCC 0
+
+extern void spi_init_f (void);
+extern void spi_init_r (void);
+
+/* The list of controllers to test */
+#if defined(CONFIG_MPC823)
+static int ctlr_list[][2] = { {CTLR_SCC, 1} };
+#else
+static int ctlr_list[][2] = { };
+#endif
+
+#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
+
+static struct {
+	void (*init) (int index);
+	void (*halt) (int index);
+	int (*send) (int index, volatile void *packet, int length);
+	int (*recv) (int index, void *packet, int length);
+} ctlr_proc[1];
+
+static char *ctlr_name[1] = { "SCC" };
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH  1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx;		/* index of the current RX buffer */
+static uint txIdx;		/* index of the current TX buffer */
+
+/*
+  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+  *  immr->udata_bd address on Dual-Port RAM
+  * Provide for Double Buffering
+  */
+
+typedef volatile struct CommonBufferDescriptor {
+	cbd_t rxbd[PKTBUFSRX];		/* Rx BD */
+	cbd_t txbd[TX_BUF_CNT];		/* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+  /*
+   * SCC callbacks
+   */
+
+static void scc_init (int scc_index)
+{
+	uchar ea[6];
+
+	static int proff[] = {
+				PROFF_SCC1,
+				PROFF_SCC2,
+				PROFF_SCC3,
+				PROFF_SCC4,
+	};
+	static unsigned int cpm_cr[] = {
+				CPM_CR_CH_SCC1,
+				CPM_CR_CH_SCC2,
+				CPM_CR_CH_SCC3,
+				CPM_CR_CH_SCC4,
+	};
+
+	int i;
+	scc_enet_t *pram_ptr;
+
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
+			~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+#if defined(CONFIG_FADS)
+#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC86xADS)
+	/* The FADS860T and MPC86xADS don't use the MODEM_EN or DATA_VOICE signals. */
+	*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
+	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
+	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#else
+	*((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
+	*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
+	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif
+#endif
+
+	pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[proff[scc_index]]);
+
+	rxIdx = 0;
+	txIdx = 0;
+
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
+					 dpram_alloc_align (sizeof (RTXBD), 8));
+#else
+	rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
+#endif
+
+#if 0
+
+#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
+	/* Configure port A pins for Txd and Rxd.
+	 */
+	immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
+	immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
+	immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
+#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
+	/* Configure port B pins for Txd and Rxd.
+	 */
+	immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
+	immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
+	immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
+#else
+#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
+#endif
+
+#if defined(PC_ENET_LBK)
+	/* Configure port C pins to disable External Loopback
+	 */
+	immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
+	immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
+	immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
+	immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK;	/* Disable Loopback */
+#endif /* PC_ENET_LBK */
+
+	/* Configure port C pins to enable CLSN and RENA.
+	 */
+	immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+	immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+	immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
+
+	/* Configure port A for TCLK and RCLK.
+	 */
+	immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
+	immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
+
+	/*
+	 * Configure Serial Interface clock routing -- see section 16.7.5.3
+	 * First, clear all SCC bits to zero, then set the ones we want.
+	 */
+
+	immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
+	immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
+#else
+	/*
+	 * SCC2 receive clock is BRG2
+	 * SCC2 transmit clock is BRG3
+	 */
+	immr->im_cpm.cp_brgc2 = 0x0001000C;
+	immr->im_cpm.cp_brgc3 = 0x0001000C;
+
+	immr->im_cpm.cp_sicr &= ~0x00003F00;
+	immr->im_cpm.cp_sicr |=  0x00000a00;
+#endif /* 0 */
+
+
+	/*
+	 * Initialize SDCR -- see section 16.9.23.7
+	 * SDMA configuration register
+	 */
+	immr->im_siu_conf.sc_sdcr = 0x01;
+
+
+	/*
+	 * Setup SCC Ethernet Parameter RAM
+	 */
+
+	pram_ptr->sen_genscc.scc_rfcr = 0x18;	/* Normal Operation and Mot byte ordering */
+	pram_ptr->sen_genscc.scc_tfcr = 0x18;	/* Mot byte ordering, Normal access */
+
+	pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH;	/* max. ET package len 1520 */
+
+	pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]);	/* Set RXBD tbl start at Dual Port */
+	pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]);	/* Set TXBD tbl start at Dual Port */
+
+	/*
+	 * Setup Receiver Buffer Descriptors (13.14.24.18)
+	 * Settings:
+	 *     Empty, Wrap
+	 */
+
+	for (i = 0; i < PKTBUFSRX; i++) {
+		rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+		rtx->rxbd[i].cbd_datlen = 0;	/* Reset */
+		rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+	}
+
+	rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+	/*
+	 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+	 * Settings:
+	 *    Add PADs to Short FRAMES, Wrap, Last, Tx CRC
+	 */
+
+	for (i = 0; i < TX_BUF_CNT; i++) {
+		rtx->txbd[i].cbd_sc =
+				(BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+		rtx->txbd[i].cbd_datlen = 0;	/* Reset */
+		rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+	}
+
+	rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+	/*
+	 * Enter Command:  Initialize Rx Params for SCC
+	 */
+
+	do {				/* Spin until ready to issue command    */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+	/* Issue command */
+	immr->im_cpm.cp_cpcr =
+			((CPM_CR_INIT_RX << 8) | (cpm_cr[scc_index] << 4) |
+			 CPM_CR_FLG);
+	do {				/* Spin until command processed     */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+	/*
+	 * Ethernet Specific Parameter RAM
+	 *     see table 13-16, pg. 660,
+	 *     pg. 681 (example with suggested settings)
+	 */
+
+	pram_ptr->sen_cpres = ~(0x0);	/* Preset CRC */
+	pram_ptr->sen_cmask = 0xdebb20e3;	/* Constant Mask for CRC */
+	pram_ptr->sen_crcec = 0x0;	/* Error Counter CRC (unused) */
+	pram_ptr->sen_alec = 0x0;	/* Alignment Error Counter (unused) */
+	pram_ptr->sen_disfc = 0x0;	/* Discard Frame Counter (unused) */
+	pram_ptr->sen_pads = 0x8888;	/* Short Frame PAD Characters */
+
+	pram_ptr->sen_retlim = 15;	/* Retry Limit Threshold */
+	pram_ptr->sen_maxflr = 1518;	/* MAX Frame Length Register */
+	pram_ptr->sen_minflr = 64;	/* MIN Frame Length Register */
+
+	pram_ptr->sen_maxd1 = DBUF_LENGTH;	/* MAX DMA1 Length Register */
+	pram_ptr->sen_maxd2 = DBUF_LENGTH;	/* MAX DMA2 Length Register */
+
+	pram_ptr->sen_gaddr1 = 0x0;	/* Group Address Filter 1 (unused) */
+	pram_ptr->sen_gaddr2 = 0x0;	/* Group Address Filter 2 (unused) */
+	pram_ptr->sen_gaddr3 = 0x0;	/* Group Address Filter 3 (unused) */
+	pram_ptr->sen_gaddr4 = 0x0;	/* Group Address Filter 4 (unused) */
+
+	eth_getenv_enetaddr("ethaddr", ea);
+	pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
+	pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
+	pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
+
+	pram_ptr->sen_pper = 0x0;	/* Persistence (unused) */
+	pram_ptr->sen_iaddr1 = 0x0;	/* Individual Address Filter 1 (unused) */
+	pram_ptr->sen_iaddr2 = 0x0;	/* Individual Address Filter 2 (unused) */
+	pram_ptr->sen_iaddr3 = 0x0;	/* Individual Address Filter 3 (unused) */
+	pram_ptr->sen_iaddr4 = 0x0;	/* Individual Address Filter 4 (unused) */
+	pram_ptr->sen_taddrh = 0x0;	/* Tmp Address (MSB) (unused) */
+	pram_ptr->sen_taddrm = 0x0;	/* Tmp Address (unused) */
+	pram_ptr->sen_taddrl = 0x0;	/* Tmp Address (LSB) (unused) */
+
+	/*
+	 * Enter Command:  Initialize Tx Params for SCC
+	 */
+
+	do {				/* Spin until ready to issue command    */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+	/* Issue command */
+	immr->im_cpm.cp_cpcr =
+			((CPM_CR_INIT_TX << 8) | (cpm_cr[scc_index] << 4) |
+			 CPM_CR_FLG);
+	do {				/* Spin until command processed     */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+	/*
+	 * Mask all Events in SCCM - we use polling mode
+	 */
+	immr->im_cpm.cp_scc[scc_index].scc_sccm = 0;
+
+	/*
+	 * Clear Events in SCCE -- Clear bits by writing 1's
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_scce = ~(0x0);
+
+
+	/*
+	 * Initialize GSMR High 32-Bits
+	 * Settings:  Normal Mode
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrh = 0;
+
+	/*
+	 * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
+	 * Settings:
+	 *     TCI = Invert
+	 *     TPL =  48 bits
+	 *     TPP = Repeating 10's
+	 *     LOOP = Loopback
+	 *     MODE = Ethernet
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrl = (SCC_GSMRL_TCI |
+						    SCC_GSMRL_TPL_48 |
+						    SCC_GSMRL_TPP_10 |
+						    SCC_GSMRL_DIAG_LOOP |
+						    SCC_GSMRL_MODE_ENET);
+
+	/*
+	 * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_dsr = 0xd555;
+
+	/*
+	 * Initialize the PSMR
+	 * Settings:
+	 *  CRC = 32-Bit CCITT
+	 *  NIB = Begin searching for SFD 22 bits after RENA
+	 *  LPB = Loopback Enable (Needed when FDE is set)
+	 */
+	immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
+			SCC_PSMR_NIB22 | SCC_PSMR_LPB;
+
+#if 0
+	/*
+	 * Configure Ethernet TENA Signal
+	 */
+
+#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
+	immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
+	immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
+#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
+	immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
+	immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
+#else
+#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
+#endif
+
+#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
+	/*
+	 * Port C is used to control the PHY,MC68160.
+	 */
+	immr->im_ioport.iop_pcdir |=
+			(PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
+
+	immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
+	immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
+	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif /* MPC860ADS */
+
+#if defined(CONFIG_AMX860)
+	/*
+	 * Port B is used to control the PHY,MC68160.
+	 */
+	immr->im_cpm.cp_pbdir |=
+			(PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
+
+	immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
+	immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
+
+	immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
+	immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
+#endif /* AMX860 */
+
+#endif /* 0 */
+
+#ifdef CONFIG_RPXCLASSIC
+	*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
+	*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
+#endif
+
+#ifdef CONFIG_RPXLITE
+	*((uchar *) BCSR0) |= BCSR0_ETHEN;
+#endif
+
+#ifdef CONFIG_MBX
+	board_ether_init ();
+#endif
+
+	/*
+	 * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
+	 */
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrl |=
+			(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	/*
+	 * Work around transmit problem with first eth packet
+	 */
+#if defined (CONFIG_FADS)
+	udelay (10000);				/* wait 10 ms */
+#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+	udelay (100000);			/* wait 100 ms */
+#endif
+}
+
+static void scc_halt (int scc_index)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+
+	immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
+			~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+	immr->im_ioport.iop_pcso  &=  ~(PC_ENET_CLSN | PC_ENET_RENA);
+}
+
+static int scc_send (int index, volatile void *packet, int length)
+{
+	int i, j = 0;
+
+	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
+		udelay (1);		/* will also trigger Wd if needed */
+		j++;
+	}
+	if (j >= TOUT_LOOP)
+		printf ("TX not ready\n");
+	rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
+	rtx->txbd[txIdx].cbd_datlen = length;
+	rtx->txbd[txIdx].cbd_sc |=
+			(BD_ENET_TX_READY | BD_ENET_TX_LAST | BD_ENET_TX_WRAP);
+	while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
+		udelay (1);		/* will also trigger Wd if needed */
+		j++;
+	}
+	if (j >= TOUT_LOOP)
+		printf ("TX timeout\n");
+	i = (rtx->txbd[txIdx].
+		 cbd_sc & BD_ENET_TX_STATS) /* return only status bits */ ;
+	return i;
+}
+
+static int scc_recv (int index, void *packet, int max_length)
+{
+	int length = -1;
+
+	if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+		goto Done;		/* nothing received */
+	}
+
+	if (!(rtx->rxbd[rxIdx].cbd_sc & 0x003f)) {
+		length = rtx->rxbd[rxIdx].cbd_datlen - 4;
+		memcpy (packet,
+				(void *) (NetRxPackets[rxIdx]),
+				length < max_length ? length : max_length);
+	}
+
+	/* Give the buffer back to the SCC. */
+	rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+	/* wrap around buffer index when necessary */
+	if ((rxIdx + 1) >= PKTBUFSRX) {
+		rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
+				(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+		rxIdx = 0;
+	} else {
+		rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+		rxIdx++;
+	}
+
+Done:
+	return length;
+}
+
+  /*
+   * Test routines
+   */
+
+static void packet_fill (char *packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	packet[0] = 0xFF;
+	packet[1] = 0xFF;
+	packet[2] = 0xFF;
+	packet[3] = 0xFF;
+	packet[4] = 0xFF;
+	packet[5] = 0xFF;
+
+	for (i = 6; i < length; i++) {
+		packet[i] = c++;
+	}
+}
+
+static int packet_check (char *packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	for (i = 6; i < length; i++) {
+		if (packet[i] != c++)
+			return -1;
+	}
+
+	return 0;
+}
+
+static int test_ctlr (int ctlr, int index)
+{
+	int res = -1;
+	char packet_send[MAX_PACKET_LENGTH];
+	char packet_recv[MAX_PACKET_LENGTH];
+	int length;
+	int i;
+	int l;
+
+	ctlr_proc[ctlr].init (index);
+
+	for (i = 0; i < TEST_NUM; i++) {
+		for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
+			packet_fill (packet_send, l);
+
+			ctlr_proc[ctlr].send (index, packet_send, l);
+
+			length = ctlr_proc[ctlr].recv (index, packet_recv,
+							MAX_PACKET_LENGTH);
+
+			if (length != l || packet_check (packet_recv, length) < 0) {
+				goto Done;
+			}
+		}
+	}
+
+	res = 0;
+
+Done:
+
+	ctlr_proc[ctlr].halt (index);
+
+	/*
+	 * SCC2 Ethernet parameter RAM space overlaps
+	 * the SPI parameter RAM space. So we need to restore
+	 * the SPI configuration after SCC2 ethernet test.
+	 */
+#if defined(CONFIG_SPI)
+	if (ctlr == CTLR_SCC && index == 1) {
+		spi_init_f ();
+		spi_init_r ();
+	}
+#endif
+
+	if (res != 0) {
+		post_log ("ethernet %s%d test failed\n", ctlr_name[ctlr],
+				  index + 1);
+	}
+
+	return res;
+}
+
+int ether_post_test (int flags)
+{
+	int res = 0;
+	int i;
+
+	ctlr_proc[CTLR_SCC].init = scc_init;
+	ctlr_proc[CTLR_SCC].halt = scc_halt;
+	ctlr_proc[CTLR_SCC].send = scc_send;
+	ctlr_proc[CTLR_SCC].recv = scc_recv;
+
+	for (i = 0; i < CTRL_LIST_SIZE; i++) {
+		if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
+			res = -1;
+		}
+	}
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+	serial_reinit_all ();
+#endif
+	return res;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_ETHER */
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc8xx/spr.c b/roms/u-boot-sam460ex/post/cpu/mpc8xx/spr.c
new file mode 100644
index 000000000..db84dbe50
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc8xx/spr.c
@@ -0,0 +1,149 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * SPR test
+ *
+ * The test checks the contents of Special Purpose Registers (SPR) listed
+ * in the spr_test_list array below.
+ * Each SPR value is read using mfspr instruction, some bits are masked
+ * according to the table and the resulting value is compared to the
+ * corresponding table value.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_SPR
+
+static struct
+{
+    int number;
+    char * name;
+    unsigned long mask;
+    unsigned long value;
+} spr_test_list [] = {
+	/* Standard Special-Purpose Registers */
+
+	{1,	"XER",		0x00000000,	0x00000000},
+	{8,	"LR",		0x00000000,	0x00000000},
+	{9,	"CTR",		0x00000000,	0x00000000},
+	{18,	"DSISR",	0x00000000,	0x00000000},
+	{19,	"DAR",		0x00000000,	0x00000000},
+	{22,	"DEC",		0x00000000,	0x00000000},
+	{26,	"SRR0",		0x00000000,	0x00000000},
+	{27,	"SRR1",		0x00000000,	0x00000000},
+	{272,	"SPRG0",	0x00000000,	0x00000000},
+	{273,	"SPRG1",	0x00000000,	0x00000000},
+	{274,	"SPRG2",	0x00000000,	0x00000000},
+	{275,	"SPRG3",	0x00000000,	0x00000000},
+	{287,	"PVR",		0xFFFF0000,	0x00500000},
+
+	/* Additional Special-Purpose Registers */
+
+	{144,	"CMPA",		0x00000000,	0x00000000},
+	{145,	"CMPB",		0x00000000,	0x00000000},
+	{146,	"CMPC",		0x00000000,	0x00000000},
+	{147,	"CMPD",		0x00000000,	0x00000000},
+	{148,	"ICR",		0xFFFFFFFF,	0x00000000},
+	{149,	"DER",		0x00000000,	0x00000000},
+	{150,	"COUNTA",	0xFFFFFFFF,	0x00000000},
+	{151,	"COUNTB",	0xFFFFFFFF,	0x00000000},
+	{152,	"CMPE",		0x00000000,	0x00000000},
+	{153,	"CMPF",		0x00000000,	0x00000000},
+	{154,	"CMPG",		0x00000000,	0x00000000},
+	{155,	"CMPH",		0x00000000,	0x00000000},
+	{156,	"LCTRL1",	0xFFFFFFFF,	0x00000000},
+	{157,	"LCTRL2",	0xFFFFFFFF,	0x00000000},
+	{158,	"ICTRL",	0xFFFFFFFF,	0x00000007},
+	{159,	"BAR",		0x00000000,	0x00000000},
+	{630,	"DPDR",		0x00000000,	0x00000000},
+	{631,	"DPIR",		0x00000000,	0x00000000},
+	{638,	"IMMR",		0xFFFF0000,	CONFIG_SYS_IMMR  },
+	{560,	"IC_CST",	0x8E380000,	0x00000000},
+	{561,	"IC_ADR",	0x00000000,	0x00000000},
+	{562,	"IC_DAT",	0x00000000,	0x00000000},
+	{568,	"DC_CST",	0xEF380000,	0x00000000},
+	{569,	"DC_ADR",	0x00000000,	0x00000000},
+	{570,	"DC_DAT",	0x00000000,	0x00000000},
+	{784,	"MI_CTR",	0xFFFFFFFF,	0x00000000},
+	{786,	"MI_AP",	0x00000000,	0x00000000},
+	{787,	"MI_EPN",	0x00000000,	0x00000000},
+	{789,	"MI_TWC",	0xFFFFFE02,	0x00000000},
+	{790,	"MI_RPN",	0x00000000,	0x00000000},
+	{816,	"MI_DBCAM",	0x00000000,	0x00000000},
+	{817,	"MI_DBRAM0",	0x00000000,	0x00000000},
+	{818,	"MI_DBRAM1",	0x00000000,	0x00000000},
+	{792,	"MD_CTR",	0xFFFFFFFF,	0x04000000},
+	{793,	"M_CASID",	0xFFFFFFF0,	0x00000000},
+	{794,	"MD_AP",	0x00000000,	0x00000000},
+	{795,	"MD_EPN",	0x00000000,	0x00000000},
+	{796,	"M_TWB",	0x00000003,	0x00000000},
+	{797,	"MD_TWC",	0x00000003,	0x00000000},
+	{798,	"MD_RPN",	0x00000000,	0x00000000},
+	{799,	"M_TW",		0x00000000,	0x00000000},
+	{824,	"MD_DBCAM",	0x00000000,	0x00000000},
+	{825,	"MD_DBRAM0",	0x00000000,	0x00000000},
+	{826,	"MD_DBRAM1",	0x00000000,	0x00000000},
+};
+
+static int spr_test_list_size =
+		sizeof (spr_test_list) / sizeof (spr_test_list[0]);
+
+int spr_post_test (int flags)
+{
+	int ret = 0;
+	int ic = icache_status ();
+	int i;
+
+	unsigned long code[] = {
+		0x7c6002a6,				/* mfspr r3,SPR */
+		0x4e800020				/* blr          */
+	};
+	unsigned long (*get_spr) (void) = (void *) code;
+
+	if (ic)
+		icache_disable ();
+
+	for (i = 0; i < spr_test_list_size; i++) {
+		int num = spr_test_list[i].number;
+
+		/* mfspr r3,num */
+		code[0] = 0x7c6002a6 | ((num & 0x1F) << 16) | ((num & 0x3E0) << 6);
+
+		if ((get_spr () & spr_test_list[i].mask) !=
+			(spr_test_list[i].value & spr_test_list[i].mask)) {
+			post_log ("The value of %s special register "
+				  "is incorrect: 0x%08X\n",
+					spr_test_list[i].name, get_spr ());
+			ret = -1;
+		}
+	}
+
+	if (ic)
+		icache_enable ();
+
+	return ret;
+}
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SPR */
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc8xx/uart.c b/roms/u-boot-sam460ex/post/cpu/mpc8xx/uart.c
new file mode 100644
index 000000000..f351ac06d
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc8xx/uart.c
@@ -0,0 +1,556 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * UART test
+ *
+ * The Serial Management Controllers (SMC) and the Serial Communication
+ * Controllers (SCC) listed in ctlr_list array below are tested in
+ * the loopback UART mode.
+ * The controllers are configured accordingly and several characters
+ * are transmitted. The configurable test parameters are:
+ *   MIN_PACKET_LENGTH - minimum size of packet to transmit
+ *   MAX_PACKET_LENGTH - maximum size of packet to transmit
+ *   TEST_NUM - number of tests
+ */
+
+#include <post.h>
+#if CONFIG_POST & CONFIG_SYS_POST_UART
+#if defined(CONFIG_8xx)
+#include <commproc.h>
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#else
+#error "Apparently a bad configuration, please fix."
+#endif
+#include <command.h>
+#include <serial.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CTLR_SMC 0
+#define CTLR_SCC 1
+
+/* The list of controllers to test */
+#if defined(CONFIG_MPC823)
+static int ctlr_list[][2] =
+		{ {CTLR_SMC, 0}, {CTLR_SMC, 1}, {CTLR_SCC, 1} };
+#else
+static int ctlr_list[][2] = { };
+#endif
+
+#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
+
+static struct {
+	void (*init) (int index);
+	void (*halt) (int index);
+	void (*putc) (int index, const char c);
+	int (*getc) (int index);
+} ctlr_proc[2];
+
+static char *ctlr_name[2] = { "SMC", "SCC" };
+
+static int proff_smc[] = { PROFF_SMC1, PROFF_SMC2 };
+static int proff_scc[] =
+		{ PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
+
+/*
+ * SMC callbacks
+ */
+
+static void smc_init (int smc_index)
+{
+	static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 };
+
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile smc_t *sp;
+	volatile smc_uart_t *up;
+	volatile cbd_t *tbdf, *rbdf;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+	uint dpaddr;
+
+	/* initialize pointers to SMC */
+
+	sp = (smc_t *) & (cp->cp_smc[smc_index]);
+	up = (smc_uart_t *) & cp->cp_dparam[proff_smc[smc_index]];
+
+	/* Disable transmitter/receiver.
+	 */
+	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+	/* Enable SDMA.
+	 */
+	im->im_siu_conf.sc_sdcr = 1;
+
+	/* clear error conditions */
+#ifdef	CONFIG_SYS_SDSR
+	im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
+#else
+	im->im_sdma.sdma_sdsr = 0x83;
+#endif
+
+	/* clear SDMA interrupt mask */
+#ifdef	CONFIG_SYS_SDMR
+	im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
+#else
+	im->im_sdma.sdma_sdmr = 0x00;
+#endif
+
+#if defined(CONFIG_FADS)
+	/* Enable RS232 */
+	*((uint *) BCSR1) &=
+			~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2);
+#endif
+
+#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+	/* Enable Monitor Port Transceiver */
+	*((uchar *) BCSR0) |= BCSR0_ENMONXCVR;
+#endif
+
+	/* Set the physical address of the host memory buffers in
+	 * the buffer descriptors.
+	 */
+
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+	dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
+#else
+	dpaddr = CPM_POST_BASE;
+#endif
+
+	/* Allocate space for two buffer descriptors in the DP ram.
+	 * For now, this address seems OK, but it may have to
+	 * change with newer versions of the firmware.
+	 * damm: allocating space after the two buffers for rx/tx data
+	 */
+
+	rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr];
+	rbdf->cbd_bufaddr = (uint) (rbdf + 2);
+	rbdf->cbd_sc = 0;
+	tbdf = rbdf + 1;
+	tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1;
+	tbdf->cbd_sc = 0;
+
+	/* Set up the uart parameters in the parameter ram.
+	 */
+	up->smc_rbase = dpaddr;
+	up->smc_tbase = dpaddr + sizeof (cbd_t);
+	up->smc_rfcr = SMC_EB;
+	up->smc_tfcr = SMC_EB;
+
+#if defined(CONFIG_MBX)
+	board_serial_init ();
+#endif
+
+	/* Set UART mode, 8 bit, no parity, one stop.
+	 * Enable receive and transmit.
+	 * Set local loopback mode.
+	 */
+	sp->smc_smcmr = smcr_mk_clen (9) | SMCMR_SM_UART | (ushort) 0x0004;
+
+	/* Mask all interrupts and remove anything pending.
+	 */
+	sp->smc_smcm = 0;
+	sp->smc_smce = 0xff;
+
+	/* Set up the baud rate generator.
+	 */
+	cp->cp_simode = 0x00000000;
+
+	cp->cp_brgc1 =
+			(((gd->cpu_clk / 16 / gd->baudrate) -
+			  1) << 1) | CPM_BRG_EN;
+
+	/* Make the first buffer the only buffer.
+	 */
+	tbdf->cbd_sc |= BD_SC_WRAP;
+	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+	/* Single character receive.
+	 */
+	up->smc_mrblr = 1;
+	up->smc_maxidl = 0;
+
+	/* Initialize Tx/Rx parameters.
+	 */
+
+	while (cp->cp_cpcr & CPM_CR_FLG)	/* wait if cp is busy */
+		;
+
+	cp->cp_cpcr =
+			mk_cr_cmd (cpm_cr_ch[smc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+	while (cp->cp_cpcr & CPM_CR_FLG)	/* wait if cp is busy */
+		;
+
+	/* Enable transmitter/receiver.
+	 */
+	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+}
+
+static void smc_halt(int smc_index)
+{
+}
+
+static void smc_putc (int smc_index, const char c)
+{
+	volatile cbd_t *tbdf;
+	volatile char *buf;
+	volatile smc_uart_t *up;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+	up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
+
+	tbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_tbase];
+
+	/* Wait for last character to go.
+	 */
+
+	buf = (char *) tbdf->cbd_bufaddr;
+#if 0
+	__asm__ ("eieio");
+	while (tbdf->cbd_sc & BD_SC_READY)
+		__asm__ ("eieio");
+#endif
+
+	*buf = c;
+	tbdf->cbd_datlen = 1;
+	tbdf->cbd_sc |= BD_SC_READY;
+	__asm__ ("eieio");
+#if 1
+	while (tbdf->cbd_sc & BD_SC_READY)
+		__asm__ ("eieio");
+#endif
+}
+
+static int smc_getc (int smc_index)
+{
+	volatile cbd_t *rbdf;
+	volatile unsigned char *buf;
+	volatile smc_uart_t *up;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile cpm8xx_t *cpmp = &(im->im_cpm);
+	unsigned char c;
+	int i;
+
+	up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
+
+	rbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_rbase];
+
+	/* Wait for character to show up.
+	 */
+	buf = (unsigned char *) rbdf->cbd_bufaddr;
+#if 0
+	while (rbdf->cbd_sc & BD_SC_EMPTY);
+#else
+	for (i = 100; i > 0; i--) {
+		if (!(rbdf->cbd_sc & BD_SC_EMPTY))
+			break;
+		udelay (1000);
+	}
+
+	if (i == 0)
+		return -1;
+#endif
+	c = *buf;
+	rbdf->cbd_sc |= BD_SC_EMPTY;
+
+	return (c);
+}
+
+  /*
+   * SCC callbacks
+   */
+
+static void scc_init (int scc_index)
+{
+	static int cpm_cr_ch[] = {
+		CPM_CR_CH_SCC1,
+		CPM_CR_CH_SCC2,
+		CPM_CR_CH_SCC3,
+		CPM_CR_CH_SCC4,
+	};
+
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile scc_t *sp;
+	volatile scc_uart_t *up;
+	volatile cbd_t *tbdf, *rbdf;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+	uint dpaddr;
+
+	/* initialize pointers to SCC */
+
+	sp = (scc_t *) & (cp->cp_scc[scc_index]);
+	up = (scc_uart_t *) & cp->cp_dparam[proff_scc[scc_index]];
+
+	/* Disable transmitter/receiver.
+	 */
+	sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+
+	/* Allocate space for two buffer descriptors in the DP ram.
+	 */
+
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+	dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
+#else
+	dpaddr = CPM_POST_BASE;
+#endif
+
+	/* Enable SDMA.
+	 */
+	im->im_siu_conf.sc_sdcr = 0x0001;
+
+	/* Set the physical address of the host memory buffers in
+	 * the buffer descriptors.
+	 */
+
+	rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr];
+	rbdf->cbd_bufaddr = (uint) (rbdf + 2);
+	rbdf->cbd_sc = 0;
+	tbdf = rbdf + 1;
+	tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1;
+	tbdf->cbd_sc = 0;
+
+	/* Set up the baud rate generator.
+	 */
+	cp->cp_sicr &= ~(0x000000FF << (8 * scc_index));
+	/* no |= needed, since BRG1 is 000 */
+
+	cp->cp_brgc1 =
+			(((gd->cpu_clk / 16 / gd->baudrate) -
+			  1) << 1) | CPM_BRG_EN;
+
+	/* Set up the uart parameters in the parameter ram.
+	 */
+	up->scc_genscc.scc_rbase = dpaddr;
+	up->scc_genscc.scc_tbase = dpaddr + sizeof (cbd_t);
+
+	/* Initialize Tx/Rx parameters.
+	 */
+	while (cp->cp_cpcr & CPM_CR_FLG)	/* wait if cp is busy */
+		;
+	cp->cp_cpcr =
+			mk_cr_cmd (cpm_cr_ch[scc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+	while (cp->cp_cpcr & CPM_CR_FLG)	/* wait if cp is busy */
+		;
+
+	up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
+	up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
+
+	up->scc_genscc.scc_mrblr = 1;	/* Single character receive */
+	up->scc_maxidl = 0;		/* disable max idle */
+	up->scc_brkcr = 1;		/* send one break character on stop TX */
+	up->scc_parec = 0;
+	up->scc_frmec = 0;
+	up->scc_nosec = 0;
+	up->scc_brkec = 0;
+	up->scc_uaddr1 = 0;
+	up->scc_uaddr2 = 0;
+	up->scc_toseq = 0;
+	up->scc_char1 = 0x8000;
+	up->scc_char2 = 0x8000;
+	up->scc_char3 = 0x8000;
+	up->scc_char4 = 0x8000;
+	up->scc_char5 = 0x8000;
+	up->scc_char6 = 0x8000;
+	up->scc_char7 = 0x8000;
+	up->scc_char8 = 0x8000;
+	up->scc_rccm = 0xc0ff;
+
+	/* Set low latency / small fifo.
+	 */
+	sp->scc_gsmrh = SCC_GSMRH_RFW;
+
+	/* Set UART mode
+	 */
+	sp->scc_gsmrl &= ~0xF;
+	sp->scc_gsmrl |= SCC_GSMRL_MODE_UART;
+
+	/* Set local loopback mode.
+	 */
+	sp->scc_gsmrl &= ~SCC_GSMRL_DIAG_LE;
+	sp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+
+	/* Set clock divider 16 on Tx and Rx
+	 */
+	sp->scc_gsmrl |= (SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+	sp->scc_psmr |= SCU_PSMR_CL;
+
+	/* Mask all interrupts and remove anything pending.
+	 */
+	sp->scc_sccm = 0;
+	sp->scc_scce = 0xffff;
+	sp->scc_dsr = 0x7e7e;
+	sp->scc_psmr = 0x3000;
+
+	/* Make the first buffer the only buffer.
+	 */
+	tbdf->cbd_sc |= BD_SC_WRAP;
+	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+	/* Enable transmitter/receiver.
+	 */
+	sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void scc_halt(int scc_index)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+	volatile scc_t *sp = (scc_t *) & (cp->cp_scc[scc_index]);
+
+	sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT | SCC_GSMRL_DIAG_LE);
+}
+
+static void scc_putc (int scc_index, const char c)
+{
+	volatile cbd_t *tbdf;
+	volatile char *buf;
+	volatile scc_uart_t *up;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+	up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
+
+	tbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
+
+	/* Wait for last character to go.
+	 */
+
+	buf = (char *) tbdf->cbd_bufaddr;
+#if 0
+	__asm__ ("eieio");
+	while (tbdf->cbd_sc & BD_SC_READY)
+		__asm__ ("eieio");
+#endif
+
+	*buf = c;
+	tbdf->cbd_datlen = 1;
+	tbdf->cbd_sc |= BD_SC_READY;
+	__asm__ ("eieio");
+#if 1
+	while (tbdf->cbd_sc & BD_SC_READY)
+		__asm__ ("eieio");
+#endif
+}
+
+static int scc_getc (int scc_index)
+{
+	volatile cbd_t *rbdf;
+	volatile unsigned char *buf;
+	volatile scc_uart_t *up;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile cpm8xx_t *cpmp = &(im->im_cpm);
+	unsigned char c;
+	int i;
+
+	up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
+
+	rbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
+
+	/* Wait for character to show up.
+	 */
+	buf = (unsigned char *) rbdf->cbd_bufaddr;
+#if 0
+	while (rbdf->cbd_sc & BD_SC_EMPTY);
+#else
+	for (i = 100; i > 0; i--) {
+		if (!(rbdf->cbd_sc & BD_SC_EMPTY))
+			break;
+		udelay (1000);
+	}
+
+	if (i == 0)
+		return -1;
+#endif
+	c = *buf;
+	rbdf->cbd_sc |= BD_SC_EMPTY;
+
+	return (c);
+}
+
+  /*
+   * Test routines
+   */
+
+static int test_ctlr (int ctlr, int index)
+{
+	int res = -1;
+	char test_str[] = "*** UART Test String ***\r\n";
+	int i;
+
+	ctlr_proc[ctlr].init (index);
+
+	for (i = 0; i < sizeof (test_str) - 1; i++) {
+		ctlr_proc[ctlr].putc (index, test_str[i]);
+		if (ctlr_proc[ctlr].getc (index) != test_str[i])
+			goto Done;
+	}
+
+	res = 0;
+
+Done:
+	ctlr_proc[ctlr].halt (index);
+
+	if (res != 0) {
+		post_log ("uart %s%d test failed\n",
+				ctlr_name[ctlr], index + 1);
+	}
+
+	return res;
+}
+
+int uart_post_test (int flags)
+{
+	int res = 0;
+	int i;
+
+	ctlr_proc[CTLR_SMC].init = smc_init;
+	ctlr_proc[CTLR_SMC].halt = smc_halt;
+	ctlr_proc[CTLR_SMC].putc = smc_putc;
+	ctlr_proc[CTLR_SMC].getc = smc_getc;
+
+	ctlr_proc[CTLR_SCC].init = scc_init;
+	ctlr_proc[CTLR_SCC].halt = scc_halt;
+	ctlr_proc[CTLR_SCC].putc = scc_putc;
+	ctlr_proc[CTLR_SCC].getc = scc_getc;
+
+	for (i = 0; i < CTRL_LIST_SIZE; i++) {
+		if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
+			res = -1;
+		}
+	}
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+	serial_reinit_all ();
+#endif
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc8xx/usb.c b/roms/u-boot-sam460ex/post/cpu/mpc8xx/usb.c
new file mode 100644
index 000000000..e3fe075be
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc8xx/usb.c
@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * USB test
+ *
+ * The USB controller is tested in the local loopback mode.
+ * It is configured so that endpoint 0 operates as host and endpoint 1
+ * operates as function endpoint. After that an IN token transaction
+ * is performed.
+ * Refer to MPC850 User Manual, Section 32.11.1 USB Host Controller
+ * Initialization Example.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_USB
+
+#include <commproc.h>
+#include <command.h>
+
+#define TOUT_LOOP 100
+
+#define	PROFF_USB		((uint)0x0000)
+
+#define CPM_USB_EP0_BASE	0x0a00
+#define CPM_USB_EP1_BASE	0x0a20
+
+#define CPM_USB_DT0_BASE	0x0a80
+#define CPM_USB_DT1_BASE	0x0a90
+#define CPM_USB_DR0_BASE	0x0aa0
+#define CPM_USB_DR1_BASE	0x0ab0
+
+#define CPM_USB_RX0_BASE	0x0b00
+#define CPM_USB_RX1_BASE	0x0b08
+#define CPM_USB_TX0_BASE	0x0b20
+#define CPM_USB_TX1_BASE	0x0b28
+
+#define USB_EXPECT(x)		if (!(x)) goto Done;
+
+typedef struct usb_param {
+	ushort ep0ptr;
+	ushort ep1ptr;
+	ushort ep2ptr;
+	ushort ep3ptr;
+	uint rstate;
+	uint rptr;
+	ushort frame_n;
+	ushort rbcnt;
+	ushort rtemp;
+} usb_param_t;
+
+typedef struct usb_param_block {
+	ushort rbase;
+	ushort tbase;
+	uchar rfcr;
+	uchar tfcr;
+	ushort mrblr;
+	ushort rbptr;
+	ushort tbptr;
+	uint tstate;
+	uint tptr;
+	ushort tcrc;
+	ushort tbcnt;
+	uint res[2];
+} usb_param_block_t;
+
+typedef struct usb {
+	uchar usmod;
+	uchar usadr;
+	uchar uscom;
+	uchar res1;
+	ushort usep[4];
+	uchar res2[4];
+	ushort usber;
+	uchar res3[2];
+	ushort usbmr;
+	uchar res4;
+	uchar usbs;
+	uchar res5[8];
+} usb_t;
+
+int usb_post_test (int flags)
+{
+	int res = -1;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+	volatile usb_param_t *pram_ptr;
+	uint dpram;
+	ushort DPRAM;
+	volatile cbd_t *tx;
+	volatile cbd_t *rx;
+	volatile usb_t *usbr;
+	volatile usb_param_block_t *ep0;
+	volatile usb_param_block_t *ep1;
+	int j;
+
+	pram_ptr = (usb_param_t *) & (im->im_cpm.cp_dparam[PROFF_USB]);
+	dpram = (uint) im->im_cpm.cp_dpmem;
+	DPRAM = dpram;
+	tx = (cbd_t *) (dpram + CPM_USB_TX0_BASE);
+	rx = (cbd_t *) (dpram + CPM_USB_RX0_BASE);
+	ep0 = (usb_param_block_t *) (dpram + CPM_USB_EP0_BASE);
+	ep1 = (usb_param_block_t *) (dpram + CPM_USB_EP1_BASE);
+	usbr = (usb_t *) & (im->im_cpm.cp_scc[0]);
+
+	/* 01 */
+	im->im_ioport.iop_padir &= ~(ushort) 0x0200;
+	im->im_ioport.iop_papar |= (ushort) 0x0200;
+
+	cp->cp_sicr &= ~0x000000FF;
+	cp->cp_sicr |= 0x00000018;
+
+	cp->cp_brgc4 = 0x00010001;
+
+	/* 02 */
+	im->im_ioport.iop_padir &= ~(ushort) 0x0002;
+	im->im_ioport.iop_padir &= ~(ushort) 0x0001;
+
+	im->im_ioport.iop_papar |= (ushort) 0x0002;
+	im->im_ioport.iop_papar |= (ushort) 0x0001;
+
+	/* 03 */
+	im->im_ioport.iop_pcdir &= ~(ushort) 0x0020;
+	im->im_ioport.iop_pcdir &= ~(ushort) 0x0010;
+
+	im->im_ioport.iop_pcpar &= ~(ushort) 0x0020;
+	im->im_ioport.iop_pcpar &= ~(ushort) 0x0010;
+
+	im->im_ioport.iop_pcso |= (ushort) 0x0020;
+	im->im_ioport.iop_pcso |= (ushort) 0x0010;
+
+	/* 04 */
+	im->im_ioport.iop_pcdir |= (ushort) 0x0200;
+	im->im_ioport.iop_pcdir |= (ushort) 0x0100;
+
+	im->im_ioport.iop_pcpar |= (ushort) 0x0200;
+	im->im_ioport.iop_pcpar |= (ushort) 0x0100;
+
+	/* 05 */
+	pram_ptr->frame_n = 0;
+
+	/* 06 */
+	pram_ptr->ep0ptr = DPRAM + CPM_USB_EP0_BASE;
+	pram_ptr->ep1ptr = DPRAM + CPM_USB_EP1_BASE;
+
+	/* 07-10 */
+	tx[0].cbd_sc = 0xB800;
+	tx[0].cbd_datlen = 3;
+	tx[0].cbd_bufaddr = dpram + CPM_USB_DT0_BASE;
+
+	tx[1].cbd_sc = 0xBC80;
+	tx[1].cbd_datlen = 3;
+	tx[1].cbd_bufaddr = dpram + CPM_USB_DT1_BASE;
+
+	rx[0].cbd_sc = 0xA000;
+	rx[0].cbd_datlen = 0;
+	rx[0].cbd_bufaddr = dpram + CPM_USB_DR0_BASE;
+
+	rx[1].cbd_sc = 0xA000;
+	rx[1].cbd_datlen = 0;
+	rx[1].cbd_bufaddr = dpram + CPM_USB_DR1_BASE;
+
+	/* 11-12 */
+	*(volatile int *) (dpram + CPM_USB_DT0_BASE) = 0x69856000;
+	*(volatile int *) (dpram + CPM_USB_DT1_BASE) = 0xABCD1234;
+
+	*(volatile int *) (dpram + CPM_USB_DR0_BASE) = 0;
+	*(volatile int *) (dpram + CPM_USB_DR1_BASE) = 0;
+
+	/* 13-16 */
+	ep0->rbase = DPRAM + CPM_USB_RX0_BASE;
+	ep0->tbase = DPRAM + CPM_USB_TX0_BASE;
+	ep0->rfcr = 0x18;
+	ep0->tfcr = 0x18;
+	ep0->mrblr = 0x100;
+	ep0->rbptr = DPRAM + CPM_USB_RX0_BASE;
+	ep0->tbptr = DPRAM + CPM_USB_TX0_BASE;
+	ep0->tstate = 0;
+
+	/* 17-20 */
+	ep1->rbase = DPRAM + CPM_USB_RX1_BASE;
+	ep1->tbase = DPRAM + CPM_USB_TX1_BASE;
+	ep1->rfcr = 0x18;
+	ep1->tfcr = 0x18;
+	ep1->mrblr = 0x100;
+	ep1->rbptr = DPRAM + CPM_USB_RX1_BASE;
+	ep1->tbptr = DPRAM + CPM_USB_TX1_BASE;
+	ep1->tstate = 0;
+
+	/* 21-24 */
+	usbr->usep[0] = 0x0000;
+	usbr->usep[1] = 0x1100;
+	usbr->usep[2] = 0x2200;
+	usbr->usep[3] = 0x3300;
+
+	/* 25 */
+	usbr->usmod = 0x06;
+
+	/* 26 */
+	usbr->usadr = 0x05;
+
+	/* 27 */
+	usbr->uscom = 0;
+
+	/* 28 */
+	usbr->usmod |= 0x01;
+	udelay (1);
+
+	/* 29-30 */
+	usbr->uscom = 0x80;
+	usbr->uscom = 0x81;
+
+	/* Wait for the data packet to be transmitted */
+	for (j = 0; j < TOUT_LOOP; j++) {
+		if (tx[1].cbd_sc & (ushort) 0x8000)
+			udelay (1);
+		else
+			break;
+	}
+
+	USB_EXPECT (j < TOUT_LOOP);
+
+	USB_EXPECT (tx[0].cbd_sc == 0x3800);
+	USB_EXPECT (tx[0].cbd_datlen == 3);
+
+	USB_EXPECT (tx[1].cbd_sc == 0x3C80);
+	USB_EXPECT (tx[1].cbd_datlen == 3);
+
+	USB_EXPECT (rx[0].cbd_sc == 0x2C00);
+	USB_EXPECT (rx[0].cbd_datlen == 5);
+
+	USB_EXPECT (*(volatile int *) (dpram + CPM_USB_DR0_BASE) ==
+				0xABCD122B);
+	USB_EXPECT (*(volatile char *) (dpram + CPM_USB_DR0_BASE + 4) == 0x42);
+
+	res = 0;
+  Done:
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_USB */
diff --git a/roms/u-boot-sam460ex/post/cpu/mpc8xx/watchdog.c b/roms/u-boot-sam460ex/post/cpu/mpc8xx/watchdog.c
new file mode 100644
index 000000000..da191c232
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/mpc8xx/watchdog.c
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Watchdog test
+ *
+ * The test verifies the watchdog timer operation.
+ * On the first iteration, the test routine disables interrupts and
+ * makes a 10-second delay. If the system does not reboot during this delay,
+ * the watchdog timer is not operational and the test fails. If the system
+ * reboots, on the second iteration the test routine reports a success.
+ */
+
+#include <post.h>
+#include <watchdog.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
+
+static ulong gettbl (void)
+{
+	ulong r;
+
+  asm ("mftbl %0":"=r" (r));
+
+	return r;
+}
+
+int watchdog_post_test (int flags)
+{
+	if (flags & POST_REBOOT) {
+		/* Test passed */
+
+		return 0;
+	} else {
+		/* 10-second delay */
+		int ints = disable_interrupts ();
+		ulong base = gettbl ();
+		ulong clk = get_tbclk ();
+
+		while ((gettbl () - base) / 10 < clk);
+
+		if (ints)
+			enable_interrupts ();
+
+		/*
+		 * If we have reached this point, the watchdog timer
+		 * does not work
+		 */
+		return -1;
+	}
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/Makefile b/roms/u-boot-sam460ex/post/cpu/ppc4xx/Makefile
new file mode 100644
index 000000000..1cfd3bb59
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/Makefile
@@ -0,0 +1,37 @@
+#
+# (C) Copyright 2002-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(OBJTREE)/include/autoconf.mk
+
+LIB	= libpostppc4xx.a
+
+AOBJS-$(CONFIG_HAS_POST)	+= cache_4xx.o
+COBJS-$(CONFIG_HAS_POST)	+= cache.o
+COBJS-$(CONFIG_HAS_POST)	+= denali_ecc.o
+COBJS-$(CONFIG_HAS_POST)	+= ether.o
+COBJS-$(CONFIG_HAS_POST)	+= fpu.o
+COBJS-$(CONFIG_HAS_POST)	+= ocm.o
+COBJS-$(CONFIG_HAS_POST)	+= spr.o
+COBJS-$(CONFIG_HAS_POST)	+= uart.o
+COBJS-$(CONFIG_HAS_POST)	+= watchdog.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/cache.c b/roms/u-boot-sam460ex/post/cpu/ppc4xx/cache.c
new file mode 100644
index 000000000..482f819f2
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/cache.c
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* Cache test
+ *
+ * This test verifies the CPU data and instruction cache using
+ * several test scenarios.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
+
+#include <asm/mmu.h>
+#include <watchdog.h>
+
+#define CACHE_POST_SIZE	1024
+
+int cache_post_test1 (int tlb, void *p, int size);
+int cache_post_test2 (int tlb, void *p, int size);
+int cache_post_test3 (int tlb, void *p, int size);
+int cache_post_test4 (int tlb, void *p, int size);
+int cache_post_test5 (int tlb, void *p, int size);
+int cache_post_test6 (int tlb, void *p, int size);
+
+#ifdef CONFIG_440
+static unsigned char testarea[CACHE_POST_SIZE]
+__attribute__((__aligned__(CACHE_POST_SIZE)));
+#endif
+
+int cache_post_test (int flags)
+{
+	void *virt = (void *)CONFIG_SYS_POST_CACHE_ADDR;
+	int ints;
+	int res = 0;
+	int tlb = -1;		/* index to the victim TLB entry */
+
+	/*
+	 * All 44x variants deal with cache management differently
+	 * because they have the address translation always enabled.
+	 * The 40x ppc's don't use address translation in U-Boot at all,
+	 * so we have to distinguish here between 40x and 44x.
+	 */
+#ifdef CONFIG_440
+	int word0, i;
+
+	/*
+	 * Allocate a new TLB entry, since we are going to modify
+	 * the write-through and caching inhibited storage attributes.
+	 */
+	program_tlb((u32)testarea, (u32)virt, CACHE_POST_SIZE,
+		    TLB_WORD2_I_ENABLE);
+
+	/* Find the TLB entry */
+	for (i = 0;; i++) {
+		if (i >= PPC4XX_TLB_SIZE) {
+			printf ("Failed to program tlb entry\n");
+			return -1;
+		}
+		word0 = mftlb1(i);
+		if (TLB_WORD0_EPN_DECODE(word0) == (u32)virt) {
+			tlb = i;
+			break;
+		}
+	}
+#endif
+	ints = disable_interrupts ();
+
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test1 (tlb, virt, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test2 (tlb, virt, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test3 (tlb, virt, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test4 (tlb, virt, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test5 (tlb, virt, CACHE_POST_SIZE);
+	WATCHDOG_RESET ();
+	if (res == 0)
+		res = cache_post_test6 (tlb, virt, CACHE_POST_SIZE);
+
+	if (ints)
+		enable_interrupts ();
+
+#ifdef CONFIG_440
+	remove_tlb((u32)virt, CACHE_POST_SIZE);
+#endif
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/cache_4xx.S b/roms/u-boot-sam460ex/post/cpu/ppc4xx/cache_4xx.S
new file mode 100644
index 000000000..3f3e5850f
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/cache_4xx.S
@@ -0,0 +1,489 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#include <post.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
+
+	.text
+
+	/*
+	 * All 44x variants deal with cache management differently
+	 * because they have the address translation always enabled.
+	 * The 40x ppc's don't use address translation in U-Boot at all,
+	 * so we have to distinguish here between 40x and 44x.
+	 */
+#ifdef CONFIG_440
+/* void cache_post_disable (int tlb)
+ */
+cache_post_disable:
+	tlbre	r0, r3, 0x0002
+	ori	r0, r0, TLB_WORD2_I_ENABLE@l
+	tlbwe	r0, r3, 0x0002
+	sync
+	isync
+	blr
+
+/* void cache_post_wt (int tlb)
+ */
+cache_post_wt:
+	tlbre	r0, r3, 0x0002
+	ori	r0, r0, TLB_WORD2_W_ENABLE@l
+	andi.	r0, r0, ~TLB_WORD2_I_ENABLE@l
+	tlbwe	r0, r3, 0x0002
+	sync
+	isync
+	blr
+
+/* void cache_post_wb (int tlb)
+ */
+cache_post_wb:
+	tlbre	r0, r3, 0x0002
+	andi.	r0, r0, ~TLB_WORD2_W_ENABLE@l
+	andi.	r0, r0, ~TLB_WORD2_I_ENABLE@l
+	tlbwe	r0, r3, 0x0002
+	sync
+	isync
+	blr
+#else
+/* void cache_post_disable (int tlb)
+ */
+cache_post_disable:
+	lis	r0, 0x0000
+	ori	r0, r0, 0x0000
+	mtdccr	r0
+	sync
+	isync
+	blr
+
+/* void cache_post_wt (int tlb)
+ */
+cache_post_wt:
+	lis	r0, 0x8000
+	ori	r0, r0, 0x0000
+	mtdccr	r0
+	lis	r0, 0x8000
+	ori	r0, r0, 0x0000
+	mtdcwr	r0
+	sync
+	isync
+	blr
+
+/* void cache_post_wb (int tlb)
+ */
+cache_post_wb:
+	lis	r0, 0x8000
+	ori	r0, r0, 0x0000
+	mtdccr	r0
+	lis	r0, 0x0000
+	ori	r0, r0, 0x0000
+	mtdcwr	r0
+	sync
+	isync
+	blr
+#endif
+
+/* void cache_post_dinvalidate (void *p, int size)
+ */
+cache_post_dinvalidate:
+	dcbi	r0, r3
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE
+	subic.	r4, r4, CONFIG_SYS_CACHELINE_SIZE
+	bgt	cache_post_dinvalidate
+	sync
+	blr
+
+/* void cache_post_dstore (void *p, int size)
+ */
+cache_post_dstore:
+	dcbst	r0, r3
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE
+	subic.	r4, r4, CONFIG_SYS_CACHELINE_SIZE
+	bgt	cache_post_dstore
+	sync
+	blr
+
+/* void cache_post_dtouch (void *p, int size)
+ */
+cache_post_dtouch:
+	dcbt	r0, r3
+	addi	r3, r3, CONFIG_SYS_CACHELINE_SIZE
+	subic.	r4, r4, CONFIG_SYS_CACHELINE_SIZE
+	bgt	cache_post_dtouch
+	sync
+	blr
+
+/* void cache_post_iinvalidate (void)
+ */
+cache_post_iinvalidate:
+	iccci	r0, r0
+	sync
+	blr
+
+/* void cache_post_memset (void *p, int val, int size)
+ */
+cache_post_memset:
+	mtctr	r5
+1:
+	stb	r4, 0(r3)
+	addi	r3, r3, 1
+	bdnz	1b
+	blr
+
+/* int cache_post_check (void *p, int size)
+ */
+cache_post_check:
+	mtctr	r4
+1:
+	lbz	r0, 0(r3)
+	addi	r3, r3, 1
+	cmpwi	r0, 0xff
+	bne	2f
+	bdnz	1b
+	li	r3, 0
+	blr
+2:
+	li	r3, -1
+	blr
+
+#define CACHE_POST_DISABLE()		\
+	mr	r3, r10;		\
+	bl	cache_post_disable
+
+#define CACHE_POST_WT()			\
+	mr	r3, r10;		\
+	bl	cache_post_wt
+
+#define CACHE_POST_WB()			\
+	mr	r3, r10;		\
+	bl	cache_post_wb
+
+#define CACHE_POST_DINVALIDATE()	\
+	mr	r3, r11;		\
+	mr	r4, r12;		\
+	bl	cache_post_dinvalidate
+
+#define CACHE_POST_DFLUSH()		\
+	mr	r3, r11;		\
+	mr	r4, r12;		\
+	bl	cache_post_dflush
+
+#define CACHE_POST_DSTORE()		\
+	mr	r3, r11;		\
+	mr	r4, r12;		\
+	bl	cache_post_dstore
+
+#define CACHE_POST_DTOUCH()		\
+	mr	r3, r11;		\
+	mr	r4, r12;		\
+	bl	cache_post_dtouch
+
+#define CACHE_POST_IINVALIDATE()	\
+	bl	cache_post_iinvalidate
+
+#define CACHE_POST_MEMSET(val)		\
+	mr	r3, r11;		\
+	li	r4, val;		\
+	mr	r5, r12;		\
+	bl	cache_post_memset
+
+#define CACHE_POST_CHECK()		\
+	mr	r3, r11;		\
+	mr	r4, r12;		\
+	bl	cache_post_check;	\
+	mr	r13, r3
+
+/*
+ * Write and read 0xff pattern with caching enabled.
+ */
+	.global cache_post_test1
+cache_post_test1:
+	mflr	r9
+	mr	r10, r3		/* tlb		*/
+	mr	r11, r4		/* p		*/
+	mr	r12, r5		/* size		*/
+
+	CACHE_POST_WB()
+	CACHE_POST_DINVALIDATE()
+
+	/* Write the negative pattern to the test area */
+	CACHE_POST_MEMSET(0xff)
+
+	/* Read the test area */
+	CACHE_POST_CHECK()
+
+	CACHE_POST_DINVALIDATE()
+	CACHE_POST_DISABLE()
+
+	mr	r3, r13
+	mtlr	r9
+	blr
+
+/*
+ * Write zeroes with caching enabled.
+ * Write 0xff pattern with caching disabled.
+ * Read 0xff pattern with caching enabled.
+ */
+	.global cache_post_test2
+cache_post_test2:
+	mflr	r9
+	mr	r10, r3		/* tlb		*/
+	mr	r11, r4		/* p		*/
+	mr	r12, r5		/* size		*/
+
+	CACHE_POST_WB()
+	CACHE_POST_DINVALIDATE()
+
+	/* Write the zero pattern to the test area */
+	CACHE_POST_MEMSET(0)
+
+	CACHE_POST_DINVALIDATE()
+	CACHE_POST_DISABLE()
+
+	/* Write the negative pattern to the test area */
+	CACHE_POST_MEMSET(0xff)
+
+	CACHE_POST_WB()
+
+	/* Read the test area */
+	CACHE_POST_CHECK()
+
+	CACHE_POST_DINVALIDATE()
+	CACHE_POST_DISABLE()
+
+	mr	r3, r13
+	mtlr	r9
+	blr
+
+/*
+ * Write-through mode test.
+ * Write zeroes, store the cache, write 0xff pattern.
+ * Invalidate the cache.
+ * Check that 0xff pattern is read.
+ */
+	.global cache_post_test3
+cache_post_test3:
+	mflr	r9
+	mr	r10, r3		/* tlb		*/
+	mr	r11, r4		/* p		*/
+	mr	r12, r5		/* size		*/
+
+	CACHE_POST_WT()
+	CACHE_POST_DINVALIDATE()
+
+	/* Cache the test area */
+	CACHE_POST_DTOUCH()
+
+	/* Write the zero pattern to the test area */
+	CACHE_POST_MEMSET(0)
+
+	CACHE_POST_DSTORE()
+
+	/* Write the negative pattern to the test area */
+	CACHE_POST_MEMSET(0xff)
+
+	CACHE_POST_DINVALIDATE()
+	CACHE_POST_DISABLE()
+
+	/* Read the test area */
+	CACHE_POST_CHECK()
+
+	mr	r3, r13
+	mtlr	r9
+	blr
+
+/*
+ * Write-back mode test.
+ * Write 0xff pattern, store the cache, write zeroes.
+ * Invalidate the cache.
+ * Check that 0xff pattern is read.
+ */
+	.global cache_post_test4
+cache_post_test4:
+	mflr	r9
+	mr	r10, r3		/* tlb		*/
+	mr	r11, r4		/* p		*/
+	mr	r12, r5		/* size		*/
+
+	CACHE_POST_WB()
+	CACHE_POST_DINVALIDATE()
+
+	/* Cache the test area */
+	CACHE_POST_DTOUCH()
+
+	/* Write the negative pattern to the test area */
+	CACHE_POST_MEMSET(0xff)
+
+	CACHE_POST_DSTORE()
+
+	/* Write the zero pattern to the test area */
+	CACHE_POST_MEMSET(0)
+
+	CACHE_POST_DINVALIDATE()
+	CACHE_POST_DISABLE()
+
+	/* Read the test area */
+	CACHE_POST_CHECK()
+
+	mr	r3, r13
+	mtlr	r9
+	blr
+
+/*
+ * Load the test instructions into the instruction cache.
+ * Replace the test instructions.
+ * Check that the original instructions are executed.
+ */
+	.global cache_post_test5
+cache_post_test5:
+	mflr	r9
+	mr	r10, r3		/* tlb		*/
+	mr	r11, r4		/* p		*/
+	mr	r12, r5		/* size		*/
+
+	CACHE_POST_WT()
+	CACHE_POST_IINVALIDATE()
+
+	/* Compute r13 = cache_post_test_inst */
+	bl	cache_post_test5_reloc
+cache_post_test5_reloc:
+	mflr	r13
+	lis	r0, (cache_post_test_inst - cache_post_test5_reloc)@h
+	ori	r0, r0, (cache_post_test_inst - cache_post_test5_reloc)@l
+	add	r13, r13, r0
+
+	/* Copy the test instructions to the test area */
+	lwz	r0, 0(r13)
+	stw	r0, 0(r11)
+	lwz	r0, 8(r13)
+	stw	r0, 4(r11)
+	sync
+
+	/* Invalidate the cache line */
+	icbi	r0, r11
+	sync
+	isync
+
+	/* Execute the test instructions */
+	mtlr	r11
+	blrl
+
+	/* Replace the test instruction */
+	lwz	r0, 4(r13)
+	stw	r0, 0(r11)
+	sync
+
+	/* Do not invalidate the cache line */
+	isync
+
+	/* Execute the test instructions */
+	mtlr	r11
+	blrl
+	mr	r13, r3
+
+	CACHE_POST_IINVALIDATE()
+	CACHE_POST_DINVALIDATE()
+	CACHE_POST_DISABLE()
+
+	mr	r3, r13
+	mtlr	r9
+	blr
+
+/*
+ * Load the test instructions into the instruction cache.
+ * Replace the test instructions and invalidate the cache.
+ * Check that the replaced instructions are executed.
+ */
+	.global cache_post_test6
+cache_post_test6:
+	mflr	r9
+	mr	r10, r3		/* tlb		*/
+	mr	r11, r4		/* p		*/
+	mr	r12, r5		/* size		*/
+
+	CACHE_POST_WT()
+	CACHE_POST_IINVALIDATE()
+
+	/* Compute r13 = cache_post_test_inst */
+	bl	cache_post_test6_reloc
+cache_post_test6_reloc:
+	mflr	r13
+	lis	r0, (cache_post_test_inst - cache_post_test6_reloc)@h
+	ori	r0, r0, (cache_post_test_inst - cache_post_test6_reloc)@l
+	add	r13, r13, r0
+
+	/* Copy the test instructions to the test area */
+	lwz	r0, 4(r13)
+	stw	r0, 0(r11)
+	lwz	r0, 8(r13)
+	stw	r0, 4(r11)
+	sync
+
+	/* Invalidate the cache line */
+	icbi	r0, r11
+	sync
+	isync
+
+	/* Execute the test instructions */
+	mtlr	r11
+	blrl
+
+	/* Replace the test instruction */
+	lwz	r0, 0(r13)
+	stw	r0, 0(r11)
+	sync
+
+	/* Invalidate the cache line */
+	icbi	r0, r11
+	sync
+	isync
+
+	/* Execute the test instructions */
+	mtlr	r11
+	blrl
+	mr	r13, r3
+
+	CACHE_POST_IINVALIDATE()
+	CACHE_POST_DINVALIDATE()
+	CACHE_POST_DISABLE()
+
+	mr	r3, r13
+	mtlr	r9
+	blr
+
+/* Test instructions.
+ */
+cache_post_test_inst:
+	li	r3, 0
+	li	r3, -1
+	blr
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/denali_ecc.c b/roms/u-boot-sam460ex/post/cpu/ppc4xx/denali_ecc.c
new file mode 100644
index 000000000..6ab159313
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/denali_ecc.c
@@ -0,0 +1,271 @@
+/*
+ * (C) Copyright 2007
+ * Developed for DENX Software Engineering GmbH.
+ *
+ * Author: Pavel Kolesnikov <concord@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <watchdog.h>
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_ECC
+
+/*
+ * MEMORY ECC test
+ *
+ * This test performs the checks ECC facility of memory.
+ */
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <ppc440.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const static uint8_t syndrome_codes[] = {
+	0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3,
+	0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB,
+	0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2,
+	0X9D, 0X9B, 0X98, 0X97, 0X94, 0X92, 0X8F, 0X8A,
+	0x75, 0x70, 0X6D, 0X6B, 0X68, 0X67, 0X64, 0X62,
+	0X5E, 0X5B, 0X58, 0X57, 0X54, 0X52, 0X4F, 0X4A,
+	0x34, 0x31, 0X2C, 0X2A, 0X29, 0X26, 0X25, 0X23,
+	0X1C, 0X1A, 0X19, 0X16, 0X15, 0X13, 0X0E, 0X0B,
+	0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01
+};
+
+#define ECC_START_ADDR		0x10
+#define ECC_STOP_ADDR		0x2000
+#define ECC_PATTERN		0x01010101
+#define ECC_PATTERN_CORR	0x11010101
+#define ECC_PATTERN_UNCORR	0x61010101
+
+inline static void disable_ecc(void)
+{
+	uint32_t value;
+
+	sync(); /* Wait for any pending memory accesses to complete. */
+	mfsdram(DDR0_22, value);
+	mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
+		| DDR0_22_CTRL_RAW_ECC_DISABLE);
+}
+
+inline static void clear_and_enable_ecc(void)
+{
+	uint32_t value;
+
+	sync(); /* Wait for any pending memory accesses to complete. */
+	mfsdram(DDR0_00, value);
+	mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
+	mfsdram(DDR0_22, value);
+	mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
+		| DDR0_22_CTRL_RAW_ECC_ENABLE);
+}
+
+static uint32_t get_ecc_status(void)
+{
+	uint32_t int_status;
+#if defined(DEBUG)
+	uint8_t syndrome;
+	uint32_t hdata, ldata, haddr, laddr;
+	uint32_t value;
+#endif
+
+	mfsdram(DDR0_00, int_status);
+	int_status &= DDR0_00_INT_STATUS_MASK;
+
+#if defined(DEBUG)
+	if (int_status & (DDR0_00_INT_STATUS_BIT0 | DDR0_00_INT_STATUS_BIT1)) {
+		mfsdram(DDR0_32, laddr);
+		mfsdram(DDR0_33, haddr);
+		haddr &= 0x00000001;
+		if (int_status & DDR0_00_INT_STATUS_BIT1)
+			debug("Multiple accesses");
+		else
+			debug("A single access");
+
+		debug(" outside the defined physical memory space detected\n"
+		      "        addr = 0x%01x%08x\n", haddr, laddr);
+	}
+	if (int_status & (DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT3)) {
+		unsigned int bit;
+
+		mfsdram(DDR0_23, value);
+		syndrome = (value >> 16) & 0xff;
+		for (bit = 0; bit < sizeof(syndrome_codes); bit++)
+			if (syndrome_codes[bit] == syndrome)
+				break;
+
+		mfsdram(DDR0_38, laddr);
+		mfsdram(DDR0_39, haddr);
+		haddr &= 0x00000001;
+		mfsdram(DDR0_40, ldata);
+		mfsdram(DDR0_41, hdata);
+		if (int_status & DDR0_00_INT_STATUS_BIT3)
+			debug("Multiple correctable ECC events");
+		else
+			debug("Single correctable ECC event");
+
+		debug(" detected\n        0x%01x%08x - 0x%08x%08x, bit - %d\n",
+		      haddr, laddr, hdata, ldata, bit);
+	}
+	if (int_status & (DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT5)) {
+		mfsdram(DDR0_23, value);
+		syndrome = (value >> 8) & 0xff;
+		mfsdram(DDR0_34, laddr);
+		mfsdram(DDR0_35, haddr);
+		haddr &= 0x00000001;
+		mfsdram(DDR0_36, ldata);
+		mfsdram(DDR0_37, hdata);
+		if (int_status & DDR0_00_INT_STATUS_BIT5)
+			debug("Multiple uncorrectable ECC events");
+		else
+			debug("Single uncorrectable ECC event");
+
+		debug(" detected\n        0x%01x%08x - 0x%08x%08x, "
+		      "syndrome - 0x%02x\n",
+		      haddr, laddr, hdata, ldata, syndrome);
+	}
+	if (int_status & DDR0_00_INT_STATUS_BIT6)
+		debug("DRAM initialization complete\n");
+#endif /* defined(DEBUG) */
+
+	return int_status;
+}
+
+static int test_ecc(uint32_t ecc_addr)
+{
+	uint32_t value;
+	volatile uint32_t *const ecc_mem = (volatile uint32_t *)ecc_addr;
+	int ret = 0;
+
+	WATCHDOG_RESET();
+
+	debug("Entering test_ecc(0x%08x)\n", ecc_addr);
+	/* Set up correct ECC in memory */
+	disable_ecc();
+	clear_and_enable_ecc();
+	out_be32(ecc_mem, ECC_PATTERN);
+	out_be32(ecc_mem + 1, ECC_PATTERN);
+
+	/* Verify no ECC error reading back */
+	value = in_be32(ecc_mem);
+	disable_ecc();
+	if (ECC_PATTERN != value) {
+		debug("Data read error (no-error case): "
+		      "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
+		ret = 1;
+	}
+	value = get_ecc_status();
+	if (0x00000000 != value) {
+		/* Expected no ECC status reported */
+		debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
+		      0x00000000, value);
+		ret = 1;
+	}
+
+	/* Test for correctable error by creating a one-bit error */
+	out_be32(ecc_mem, ECC_PATTERN_CORR);
+	clear_and_enable_ecc();
+	value = in_be32(ecc_mem);
+	disable_ecc();
+	/* Test that the corrected data was read */
+	if (ECC_PATTERN != value) {
+		debug("Data read error (correctable-error case): "
+		      "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
+		ret = 1;
+	}
+	value = get_ecc_status();
+	if ((DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT7) != value) {
+		/* Expected a single correctable error reported */
+		debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
+		      DDR0_00_INT_STATUS_BIT2, value);
+		ret = 1;
+	}
+
+	/* Test for uncorrectable error by creating a two-bit error */
+	out_be32(ecc_mem, ECC_PATTERN_UNCORR);
+	clear_and_enable_ecc();
+	value = in_be32(ecc_mem);
+	disable_ecc();
+	/* Test that the corrected data was read */
+	if (ECC_PATTERN_UNCORR != value) {
+		debug("Data read error (uncorrectable-error case): "
+		      "expected 0x%08x, read 0x%08x\n", ECC_PATTERN_UNCORR,
+		      value);
+		ret = 1;
+	}
+	value = get_ecc_status();
+	if ((DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT7) != value) {
+		/* Expected a single uncorrectable error reported */
+		debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
+		      DDR0_00_INT_STATUS_BIT4, value);
+		ret = 1;
+	}
+
+	/* Remove error from SDRAM and enable ECC. */
+	out_be32(ecc_mem, ECC_PATTERN);
+	clear_and_enable_ecc();
+
+	return ret;
+}
+
+int ecc_post_test(int flags)
+{
+	int ret = 0;
+	uint32_t value;
+	uint32_t iaddr;
+
+	mfsdram(DDR0_22, value);
+	if (0x3 != DDR0_22_CTRL_RAW_DECODE(value)) {
+		debug("SDRAM ECC not enabled, skipping ECC POST.\n");
+		return 0;
+	}
+
+	/* Mask all interrupts. */
+	mfsdram(DDR0_01, value);
+	mtsdram(DDR0_01, (value & ~DDR0_01_INT_MASK_MASK)
+		| DDR0_01_INT_MASK_ALL_OFF);
+
+	for (iaddr = ECC_START_ADDR; iaddr <= ECC_STOP_ADDR; iaddr += iaddr) {
+		ret = test_ecc(iaddr);
+		if (ret)
+			break;
+	}
+	/*
+	 * Clear possible errors resulting from ECC testing.  (If not done, we
+	 * we could get an interrupt later on when exceptions are enabled.)
+	 */
+	set_mcsr(get_mcsr());
+	debug("ecc_post_test() returning %d\n", ret);
+	return ret;
+}
+#endif /* CONFIG_POST & CONFIG_SYS_POST_ECC */
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/ether.c b/roms/u-boot-sam460ex/post/cpu/ppc4xx/ether.c
new file mode 100644
index 000000000..a58db04e4
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/ether.c
@@ -0,0 +1,430 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Ethernet test
+ *
+ * The Ethernet Media Access Controllers (EMAC) are tested in the
+ * internal loopback mode.
+ * The controllers are configured accordingly and several packets
+ * are transmitted. The configurable test parameters are:
+ *   MIN_PACKET_LENGTH - minimum size of packet to transmit
+ *   MAX_PACKET_LENGTH - maximum size of packet to transmit
+ *   TEST_NUM - number of tests
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_ETHER
+
+#include <asm/cache.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <405_mal.h>
+#include <ppc4xx_enet.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Get count of EMAC devices (doesn't have to be the max. possible number
+ * supported by the cpu)
+ *
+ * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the
+ * EMAC count is possible. As it is needed for the Kilauea/Haleakala
+ * 405EX/405EXr eval board, using the same binary.
+ */
+#if defined(CONFIG_BOARD_EMAC_COUNT)
+#define LAST_EMAC_NUM	board_emac_count()
+#else /* CONFIG_BOARD_EMAC_COUNT */
+#if defined(CONFIG_HAS_ETH3)
+#define LAST_EMAC_NUM	4
+#elif defined(CONFIG_HAS_ETH2)
+#define LAST_EMAC_NUM	3
+#elif defined(CONFIG_HAS_ETH1)
+#define LAST_EMAC_NUM	2
+#else
+#define LAST_EMAC_NUM	1
+#endif
+#endif /* CONFIG_BOARD_EMAC_COUNT */
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_MFR_ETH_CLK_SEL_V(n)	((0x01<<27) / (n+1))
+#endif
+
+#define MIN_PACKET_LENGTH	64
+#define MAX_PACKET_LENGTH	256
+#define TEST_NUM		1
+
+static volatile mal_desc_t tx __cacheline_aligned;
+static volatile mal_desc_t rx __cacheline_aligned;
+static char *tx_buf;
+static char *rx_buf;
+
+int board_emac_count(void);
+
+static void ether_post_init (int devnum, int hw_addr)
+{
+	int i;
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	unsigned mode_reg;
+	sys_info_t sysinfo;
+#endif
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
+	unsigned long mfr;
+#endif
+
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	/* Need to get the OPB frequency so we can access the PHY */
+	get_sys_info (&sysinfo);
+#endif
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+	/* provide clocks for EMAC internal loopback  */
+	mfsdr (SDR0_MFR, mfr);
+	mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
+	mtsdr (SDR0_MFR, mfr);
+	sync ();
+#endif
+	/* reset emac */
+	out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST);
+	sync ();
+
+	for (i = 0;; i++) {
+		if (!(in_be32 ((void*)(EMAC0_MR0 + hw_addr)) & EMAC_MR0_SRST))
+			break;
+		if (i >= 1000) {
+			printf ("Timeout resetting EMAC\n");
+			break;
+		}
+		udelay (1000);
+	}
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	/* Whack the M1 register */
+	mode_reg = 0x0;
+	if (sysinfo.freqOPB <= 50000000);
+	else if (sysinfo.freqOPB <= 66666667)
+		mode_reg |= EMAC_MR1_OBCI_66;
+	else if (sysinfo.freqOPB <= 83333333)
+		mode_reg |= EMAC_MR1_OBCI_83;
+	else if (sysinfo.freqOPB <= 100000000)
+		mode_reg |= EMAC_MR1_OBCI_100;
+	else
+		mode_reg |= EMAC_MR1_OBCI_GT100;
+
+	out_be32 ((void*)(EMAC0_MR1 + hw_addr), mode_reg);
+
+#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
+
+	/* set the Mal configuration reg */
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
+	       MAL_CR_PLBLT_DEFAULT | 0x00330000);
+#else
+	mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
+	/* Errata 1.12: MAL_1 -- Disable MAL bursting */
+	if (get_pvr() == PVR_440GP_RB) {
+		mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB);
+	}
+#endif
+	/* setup buffer descriptors */
+	tx.ctrl = MAL_TX_CTRL_WRAP;
+	tx.data_len = 0;
+	tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf);
+
+	rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY;
+	rx.data_len = 0;
+	rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf);
+	flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
+	flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
+
+	switch (devnum) {
+	case 1:
+		/* setup MAL tx & rx channel pointers */
+#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
+		mtdcr (MAL0_TXCTP2R, &tx);
+#else
+		mtdcr (MAL0_TXCTP1R, &tx);
+#endif
+#if defined(CONFIG_440)
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
+#endif
+		mtdcr (MAL0_RXCTP1R, &rx);
+		/* set RX buffer size */
+		mtdcr (MAL0_RCBS1, PKTSIZE_ALIGN / 16);
+		break;
+	case 0:
+	default:
+		/* setup MAL tx & rx channel pointers */
+#if defined(CONFIG_440)
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
+#endif
+		mtdcr (MAL0_TXCTP0R, &tx);
+		mtdcr (MAL0_RXCTP0R, &rx);
+		/* set RX buffer size */
+		mtdcr (MAL0_RCBS0, PKTSIZE_ALIGN / 16);
+		break;
+	}
+
+	/* Enable MAL transmit and receive channels */
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+	mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (devnum*2)));
+#else
+	mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> devnum));
+#endif
+	mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> devnum));
+
+	/* set internal loopback mode */
+#ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK
+	out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | 0 |
+		  EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K |
+		  EMAC_MR1_MF_100MBPS | EMAC_MR1_IST |
+		  in_be32 ((void*)(EMAC0_MR1 + hw_addr)));
+#else
+	out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | EMAC_MR1_ILE |
+		  EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K |
+		  EMAC_MR1_MF_100MBPS | EMAC_MR1_IST |
+		  in_be32 ((void*)(EMAC0_MR1 + hw_addr)));
+#endif
+
+	/* set transmit enable & receive enable */
+	out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_TXE | EMAC_MR0_RXE);
+
+	/* enable broadcast address */
+	out_be32 ((void*)(EMAC0_RXM + hw_addr), EMAC_RMR_BAE);
+
+	/* set transmit request threshold register */
+	out_be32 ((void*)(EMAC0_TRTR + hw_addr), 0x18000000);	/* 256 byte threshold */
+
+	/* set receive	low/high water mark register */
+#if defined(CONFIG_440)
+	/* 440s has a 64 byte burst length */
+	out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x80009000);
+#else
+	/* 405s have a 16 byte burst length */
+	out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x0f002000);
+#endif /* defined(CONFIG_440) */
+	out_be32 ((void*)(EMAC0_TMR1 + hw_addr), 0xf8640000);
+
+	/* Set fifo limit entry in tx mode 0 */
+	out_be32 ((void*)(EMAC0_TMR0 + hw_addr), 0x00000003);
+	/* Frame gap set */
+	out_be32 ((void*)(EMAC0_I_FRAME_GAP_REG + hw_addr), 0x00000008);
+	sync ();
+}
+
+static void ether_post_halt (int devnum, int hw_addr)
+{
+	int i = 0;
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+	unsigned long mfr;
+#endif
+
+	/* 1st reset MAL channel */
+	/* Note: writing a 0 to a channel has no effect */
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+	mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> (devnum * 2));
+#else
+	mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> devnum);
+#endif
+	mtdcr (MAL0_RXCARR, MAL_TXRX_CASR >> devnum);
+
+	/* wait for reset */
+	while (mfdcr (MAL0_RXCASR) & (MAL_TXRX_CASR >> devnum)) {
+		if (i++ >= 1000)
+			break;
+		udelay (1000);
+	}
+	/* emac reset */
+	out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST);
+
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+	/* remove clocks for EMAC internal loopback  */
+	mfsdr (SDR0_MFR, mfr);
+	mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
+	mtsdr (SDR0_MFR, mfr);
+#endif
+}
+
+static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
+{
+	int i = 0;
+
+	while (tx.ctrl & MAL_TX_CTRL_READY) {
+		if (i++ > 100) {
+			printf ("TX timeout\n");
+			return;
+		}
+		udelay (1000);
+		invalidate_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
+	}
+	tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST |
+		EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP;
+	tx.data_len = length;
+	memcpy (tx.data_ptr, packet, length);
+	flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
+	flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length);
+	sync ();
+
+	out_be32 ((void*)(EMAC0_TMR0 + hw_addr), in_be32 ((void*)(EMAC0_TMR0 + hw_addr)) | EMAC_TMR0_GNP0);
+	sync ();
+}
+
+static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length)
+{
+	int length;
+	int i = 0;
+
+	while (rx.ctrl & MAL_RX_CTRL_EMPTY) {
+		if (i++ > 100) {
+			printf ("RX timeout\n");
+			return 0;
+		}
+		udelay (1000);
+		invalidate_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
+	}
+	length = rx.data_len - 4;
+	if (length <= max_length) {
+		invalidate_dcache_range((u32)rx.data_ptr, (u32)rx.data_ptr + length);
+		memcpy(packet, rx.data_ptr, length);
+	}
+	sync ();
+
+	rx.ctrl |= MAL_RX_CTRL_EMPTY;
+	flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
+	sync ();
+
+	return length;
+}
+
+  /*
+   * Test routines
+   */
+
+static void packet_fill (char *packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	/* set up ethernet header */
+	memset (packet, 0xff, 14);
+
+	for (i = 14; i < length; i++) {
+		packet[i] = c++;
+	}
+}
+
+static int packet_check (char *packet, int length)
+{
+	char c = (char) length;
+	int i;
+
+	for (i = 14; i < length; i++) {
+		if (packet[i] != c++)
+			return -1;
+	}
+
+	return 0;
+}
+
+static int test_ctlr (int devnum, int hw_addr)
+{
+	int res = -1;
+	char packet_send[MAX_PACKET_LENGTH];
+	char packet_recv[MAX_PACKET_LENGTH];
+	int length;
+	int i;
+	int l;
+
+	ether_post_init (devnum, hw_addr);
+
+	for (i = 0; i < TEST_NUM; i++) {
+		for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
+			packet_fill (packet_send, l);
+
+			ether_post_send (devnum, hw_addr, packet_send, l);
+
+			length = ether_post_recv (devnum, hw_addr, packet_recv,
+						  sizeof (packet_recv));
+
+			if (length != l || packet_check (packet_recv, length) < 0) {
+				goto Done;
+			}
+		}
+	}
+
+	res = 0;
+
+Done:
+
+	ether_post_halt (devnum, hw_addr);
+
+	if (res != 0) {
+		post_log ("EMAC%d test failed\n", devnum);
+	}
+
+	return res;
+}
+
+int ether_post_test (int flags)
+{
+	int res = 0;
+	int i;
+
+	/* Allocate tx & rx packet buffers */
+	tx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE);
+	rx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE);
+
+	if (!tx_buf || !rx_buf) {
+		printf ("Failed to allocate packet buffers\n");
+		res = -1;
+		goto out_free;
+	}
+
+	for (i = 0; i < LAST_EMAC_NUM; i++) {
+		if (test_ctlr (i, i*0x100))
+			res = -1;
+	}
+
+out_free:
+	free (tx_buf);
+	free (rx_buf);
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_ETHER */
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/fpu.c b/roms/u-boot-sam460ex/post/cpu/ppc4xx/fpu.c
new file mode 100644
index 000000000..e9b96dde8
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/fpu.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Sergei Poselenov <sposelenov@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_440EP) || \
+    defined(CONFIG_440EPX)
+
+#include <asm/processor.h>
+#include <ppc4xx.h>
+
+
+int fpu_status(void)
+{
+	if (mfspr(SPRN_CCR0) & CCR0_DAPUIB)
+		return 0; /* Disabled */
+	else
+		return 1; /* Enabled */
+}
+
+
+void fpu_disable(void)
+{
+	mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) | CCR0_DAPUIB);
+	mtmsr(mfmsr() & ~MSR_FP);
+}
+
+
+void fpu_enable(void)
+{
+	mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) & ~CCR0_DAPUIB);
+	mtmsr(mfmsr() | MSR_FP);
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/ocm.c b/roms/u-boot-sam460ex/post/cpu/ppc4xx/ocm.c
new file mode 100644
index 000000000..584e30cf8
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/ocm.c
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2008 Ilya Yanok, EmCraft Systems, yanok@emcraft.com
+ *
+ * Developed for DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+/*
+ * This test attempts to verify on-chip memory (OCM). Result is written
+ * to the scratch register and if test succeed it won't be run till next
+ * power on.
+ */
+
+#include <post.h>
+
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define OCM_TEST_PATTERN1	0x55555555
+#define OCM_TEST_PATTERN2	0xAAAAAAAA
+
+#if CONFIG_POST & CONFIG_SYS_POST_OCM
+
+static uint ocm_status_read(void)
+{
+	return in_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR) &
+		CONFIG_SYS_OCM_STATUS_MASK;
+}
+
+static void ocm_status_write(uint value)
+{
+	out_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR, value |
+		(in_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR) &
+			~CONFIG_SYS_OCM_STATUS_MASK));
+}
+
+static inline int ocm_test_word(uint value, uint *address)
+{
+	uint read_value;
+
+	*address = value;
+	sync();
+	read_value = *address;
+
+	return (read_value != value);
+}
+
+int ocm_post_test(int flags)
+{
+	uint   old_value;
+	int    ret = 0;
+	uint  *address = (uint*)CONFIG_SYS_OCM_BASE;
+
+	if (ocm_status_read() == CONFIG_SYS_OCM_STATUS_OK)
+		return 0;
+	for (; address < (uint*)(CONFIG_SYS_OCM_BASE + CONFIG_SYS_OCM_SIZE); address++) {
+		old_value = *address;
+		if (ocm_test_word(OCM_TEST_PATTERN1, address) ||
+				ocm_test_word(OCM_TEST_PATTERN2, address)) {
+			ret = 1;
+			*address = old_value;
+			printf("OCM POST failed at %p!\n", address);
+			break;
+		}
+		*address = old_value;
+	}
+	ocm_status_write(ret ? CONFIG_SYS_OCM_STATUS_FAIL : CONFIG_SYS_OCM_STATUS_OK);
+	return ret;
+}
+#endif /* CONFIG_POST & CONFIG_SYS_POST_OCM */
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/spr.c b/roms/u-boot-sam460ex/post/cpu/ppc4xx/spr.c
new file mode 100644
index 000000000..cb18b6436
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/spr.c
@@ -0,0 +1,201 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * SPR test
+ *
+ * The test checks the contents of Special Purpose Registers (SPR) listed
+ * in the spr_test_list array below.
+ * Each SPR value is read using mfspr instruction, some bits are masked
+ * according to the table and the resulting value is compared to the
+ * corresponding table value.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_SPR
+
+#include <asm/processor.h>
+
+#ifdef CONFIG_4xx_DCACHE
+#include <asm/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+static struct {
+	int number;
+	char * name;
+	unsigned long mask;
+	unsigned long value;
+} spr_test_list [] = {
+	/* Standard Special-Purpose Registers */
+
+	{0x001,	"XER",		0x00000000,	0x00000000},
+	{0x008,	"LR",		0x00000000,	0x00000000},
+	{0x009,	"CTR",		0x00000000,	0x00000000},
+	{0x016,	"DEC",		0x00000000,	0x00000000},
+	{0x01a,	"SRR0",		0x00000000,	0x00000000},
+	{0x01b,	"SRR1",		0x00000000,	0x00000000},
+	{0x110,	"SPRG0",	0x00000000,	0x00000000},
+	{0x111,	"SPRG1",	0x00000000,	0x00000000},
+	{0x112,	"SPRG2",	0x00000000,	0x00000000},
+	{0x113,	"SPRG3",	0x00000000,	0x00000000},
+	{0x11f,	"PVR",		0x00000000,	0x00000000},
+
+	/* Additional Special-Purpose Registers.
+	 * The values must match the initialization
+	 * values from arch/powerpc/cpu/ppc4xx/start.S
+	 */
+	{0x30,	"PID",		0x00000000,	0x00000000},
+	{0x3a,	"CSRR0",	0x00000000,	0x00000000},
+	{0x3b,	"CSRR1",	0x00000000,	0x00000000},
+	{0x3d,	"DEAR",		0x00000000,	0x00000000},
+	{0x3e,	"ESR",		0x00000000,	0x00000000},
+#ifdef CONFIG_440
+	{0x3f,	"IVPR",		0xffff0000,	0x00000000},
+#endif
+	{0x100,	"USPRG0",	0x00000000,	0x00000000},
+	{0x104,	"SPRG4",	0x00000000,	0x00000000},
+	{0x105,	"SPRG5",	0x00000000,	0x00000000},
+	{0x106,	"SPRG6",	0x00000000,	0x00000000},
+	{0x107,	"SPRG7",	0x00000000,	0x00000000},
+	{0x10c,	"TBL",		0x00000000,	0x00000000},
+	{0x10d,	"TBU",		0x00000000,	0x00000000},
+#ifdef CONFIG_440
+	{0x11e,	"PIR",		0x0000000f,	0x00000000},
+#endif
+	{0x130,	"DBSR",		0x00000000,	0x00000000},
+	{0x134,	"DBCR0",	0x00000000,	0x00000000},
+	{0x135,	"DBCR1",	0x00000000,	0x00000000},
+	{0x136,	"DBCR2",	0x00000000,	0x00000000},
+	{0x138,	"IAC1",		0x00000000,	0x00000000},
+	{0x139,	"IAC2",		0x00000000,	0x00000000},
+	{0x13a,	"IAC3",		0x00000000,	0x00000000},
+	{0x13b,	"IAC4",		0x00000000,	0x00000000},
+	{0x13c,	"DAC1",		0x00000000,	0x00000000},
+	{0x13d,	"DAC2",		0x00000000,	0x00000000},
+	{0x13e,	"DVC1",		0x00000000,	0x00000000},
+	{0x13f,	"DVC2",		0x00000000,	0x00000000},
+	{0x150,	"TSR",		0x00000000,	0x00000000},
+	{0x154,	"TCR",		0x00000000,	0x00000000},
+#ifdef CONFIG_440
+	{0x190,	"IVOR0",	0x0000fff0,	0x00000100},
+	{0x191,	"IVOR1",	0x0000fff0,	0x00000200},
+	{0x192,	"IVOR2",	0x0000fff0,	0x00000300},
+	{0x193,	"IVOR3",	0x0000fff0,	0x00000400},
+	{0x194,	"IVOR4",	0x0000fff0,	0x00000500},
+	{0x195,	"IVOR5",	0x0000fff0,	0x00000600},
+	{0x196,	"IVOR6",	0x0000fff0,	0x00000700},
+	{0x197,	"IVOR7",	0x0000fff0,	0x00000800},
+	{0x198,	"IVOR8",	0x0000fff0,	0x00000c00},
+	{0x199,	"IVOR9",	0x00000000,	0x00000000},
+	{0x19a,	"IVOR10",	0x0000fff0,	0x00000900},
+	{0x19b,	"IVOR11",	0x00000000,	0x00000000},
+	{0x19c,	"IVOR12",	0x00000000,	0x00000000},
+	{0x19d,	"IVOR13",	0x0000fff0,	0x00001300},
+	{0x19e,	"IVOR14",	0x0000fff0,	0x00001400},
+	{0x19f,	"IVOR15",	0x0000fff0,	0x00002000},
+#endif
+	{0x23a,	"MCSRR0",	0x00000000,	0x00000000},
+	{0x23b,	"MCSRR1",	0x00000000,	0x00000000},
+	{0x23c,	"MCSR",		0x00000000,	0x00000000},
+	{0x370,	"INV0",		0x00000000,	0x00000000},
+	{0x371,	"INV1",		0x00000000,	0x00000000},
+	{0x372,	"INV2",		0x00000000,	0x00000000},
+	{0x373,	"INV3",		0x00000000,	0x00000000},
+	{0x374,	"ITV0",		0x00000000,	0x00000000},
+	{0x375,	"ITV1",		0x00000000,	0x00000000},
+	{0x376,	"ITV2",		0x00000000,	0x00000000},
+	{0x377,	"ITV3",		0x00000000,	0x00000000},
+	{0x378,	"CCR1",		0x00000000,	0x00000000},
+	{0x390,	"DNV0",		0x00000000,	0x00000000},
+	{0x391,	"DNV1",		0x00000000,	0x00000000},
+	{0x392,	"DNV2",		0x00000000,	0x00000000},
+	{0x393,	"DNV3",		0x00000000,	0x00000000},
+	{0x394,	"DTV0",		0x00000000,	0x00000000},
+	{0x395,	"DTV1",		0x00000000,	0x00000000},
+	{0x396,	"DTV2",		0x00000000,	0x00000000},
+	{0x397,	"DTV3",		0x00000000,	0x00000000},
+#ifdef CONFIG_440
+	{0x398,	"DVLIM",	0x0fc1f83f,	0x0001f800},
+	{0x399,	"IVLIM",	0x0fc1f83f,	0x0001f800},
+#endif
+	{0x39b,	"RSTCFG",	0x00000000,	0x00000000},
+	{0x39c,	"DCDBTRL",	0x00000000,	0x00000000},
+	{0x39d,	"DCDBTRH",	0x00000000,	0x00000000},
+	{0x39e,	"ICDBTRL",	0x00000000,	0x00000000},
+	{0x39f,	"ICDBTRH",	0x00000000,	0x00000000},
+	{0x3b2,	"MMUCR",	0x00000000,	0x00000000},
+	{0x3b3,	"CCR0",		0x00000000,	0x00000000},
+	{0x3d3,	"ICDBDR",	0x00000000,	0x00000000},
+	{0x3f3,	"DBDR",		0x00000000,	0x00000000},
+};
+
+static int spr_test_list_size =
+		sizeof (spr_test_list) / sizeof (spr_test_list[0]);
+
+int spr_post_test (int flags)
+{
+	int ret = 0;
+	int i;
+
+	unsigned long code[] = {
+		0x7c6002a6,				/* mfspr r3,SPR */
+		0x4e800020				/* blr          */
+	};
+	unsigned long (*get_spr) (void) = (void *) code;
+
+#ifdef CONFIG_4xx_DCACHE
+	/* disable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
+#endif
+	for (i = 0; i < spr_test_list_size; i++) {
+		int num = spr_test_list[i].number;
+
+		/* mfspr r3,num */
+		code[0] = 0x7c6002a6 | ((num & 0x1F) << 16) | ((num & 0x3E0) << 6);
+
+		asm volatile ("isync");
+
+		if ((get_spr () & spr_test_list[i].mask) !=
+			(spr_test_list[i].value & spr_test_list[i].mask)) {
+			post_log ("The value of %s special register "
+				  "is incorrect: 0x%08X\n",
+					spr_test_list[i].name, get_spr ());
+			ret = -1;
+		}
+	}
+#ifdef CONFIG_4xx_DCACHE
+	/* enable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
+
+	return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_SPR */
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/uart.c b/roms/u-boot-sam460ex/post/cpu/ppc4xx/uart.c
new file mode 100644
index 000000000..be217fcf8
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/uart.c
@@ -0,0 +1,389 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * UART test
+ *
+ * The controllers are configured to loopback mode and several
+ * characters are transmitted.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_UART
+
+/*
+ * This table defines the UART's that should be tested and can
+ * be overridden in the board config file
+ */
+#ifndef CONFIG_SYS_POST_UART_TABLE
+#define CONFIG_SYS_POST_UART_TABLE	{UART0_BASE, UART1_BASE, UART2_BASE, UART3_BASE}
+#endif
+
+#include <asm/processor.h>
+#include <serial.h>
+
+#if defined(CONFIG_440)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define UART0_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
+#define UART1_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000400
+#define UART2_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000500
+#define UART3_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
+#else
+#define UART0_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000200
+#define UART1_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000300
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define UART2_BASE  CONFIG_SYS_PERIPHERAL_BASE + 0x00000600
+#endif
+
+#if defined(CONFIG_440GP)
+#define CR0_MASK        0x3fff0000
+#define CR0_EXTCLK_ENA  0x00600000
+#define CR0_UDIV_POS    16
+#define UDIV_SUBTRACT	1
+#define UART0_SDR	CPC0_CR0
+#define MFREG(a, d)	d = mfdcr(a)
+#define MTREG(a, d)	mtdcr(a, d)
+#else /* #if defined(CONFIG_440GP) */
+/* all other 440 PPC's access clock divider via sdr register */
+#define CR0_MASK        0xdfffffff
+#define CR0_EXTCLK_ENA  0x00800000
+#define CR0_UDIV_POS    0
+#define UDIV_SUBTRACT	0
+#define UART0_SDR	SDR0_UART0
+#define UART1_SDR	SDR0_UART1
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+    defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define UART2_SDR	SDR0_UART2
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
+    defined(CONFIG_440GR) || defined(CONFIG_440GRX)
+#define UART3_SDR	SDR0_UART3
+#endif
+#define MFREG(a, d)	mfsdr(a, d)
+#define MTREG(a, d)	mtsdr(a, d)
+#endif /* #if defined(CONFIG_440GP) */
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
+#define UART0_BASE      0xef600300
+#define UART1_BASE      0xef600400
+#define UCR0_MASK       0x0000007f
+#define UCR1_MASK       0x00007f00
+#define UCR0_UDIV_POS   0
+#define UCR1_UDIV_POS   8
+#define UDIV_MAX        127
+#elif defined(CONFIG_405EX)
+#define UART0_BASE	0xef600200
+#define UART1_BASE	0xef600300
+#define CR0_MASK	0x000000ff
+#define CR0_EXTCLK_ENA	0x00800000
+#define CR0_UDIV_POS	0
+#define UDIV_SUBTRACT	0
+#define UART0_SDR	SDR0_UART0
+#define UART1_SDR	SDR0_UART1
+#define MFREG(a, d)	mfsdr(a, d)
+#define MTREG(a, d)	mtsdr(a, d)
+#else /* CONFIG_405GP || CONFIG_405CR */
+#define UART0_BASE      0xef600300
+#define UART1_BASE      0xef600400
+#define CR0_MASK        0x00001fff
+#define CR0_EXTCLK_ENA  0x000000c0
+#define CR0_UDIV_POS    1
+#define UDIV_MAX        32
+#endif
+
+#define UART_RBR    0x00
+#define UART_THR    0x00
+#define UART_IER    0x01
+#define UART_IIR    0x02
+#define UART_FCR    0x02
+#define UART_LCR    0x03
+#define UART_MCR    0x04
+#define UART_LSR    0x05
+#define UART_MSR    0x06
+#define UART_SCR    0x07
+#define UART_DLL    0x00
+#define UART_DLM    0x01
+
+/*
+ * Line Status Register.
+ */
+#define asyncLSRDataReady1            0x01
+#define asyncLSROverrunError1         0x02
+#define asyncLSRParityError1          0x04
+#define asyncLSRFramingError1         0x08
+#define asyncLSRBreakInterrupt1       0x10
+#define asyncLSRTxHoldEmpty1          0x20
+#define asyncLSRTxShiftEmpty1         0x40
+#define asyncLSRRxFifoError1          0x80
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_440) || defined(CONFIG_405EX)
+#if !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
+static void serial_divs (int baudrate, unsigned long *pudiv,
+			 unsigned short *pbdiv)
+{
+	sys_info_t sysinfo;
+	unsigned long div;		/* total divisor udiv * bdiv */
+	unsigned long umin;		/* minimum udiv */
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
+	unsigned long i;
+	unsigned long est;		/* current estimate */
+
+	get_sys_info(&sysinfo);
+
+	udiv = 32;			/* Assume lowest possible serial clk */
+	div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
+	umin = sysinfo.pllOpbDiv << 1;	/* 2 x OPB divisor */
+	diff = 32;			/* highest possible */
+
+	/* i is the test udiv value -- start with the largest
+	 * possible (32) to minimize serial clock and constrain
+	 * search to umin.
+	 */
+	for (i = 32; i > umin; i--) {
+		ibdiv = div / i;
+		est = i * ibdiv;
+		idiff = (est > div) ? (est-div) : (div-est);
+		if (idiff == 0) {
+			udiv = i;
+			break;	/* can't do better */
+		} else if (idiff < diff) {
+			udiv = i;	/* best so far */
+			diff = idiff;	/* update lowest diff*/
+		}
+	}
+
+	*pudiv = udiv;
+	*pbdiv = div / udiv;
+}
+#endif
+
+static int uart_post_init (unsigned long dev_base)
+{
+	unsigned long reg = 0;
+	unsigned long udiv;
+	unsigned short bdiv;
+	volatile char val;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+	unsigned long tmp;
+#endif
+	int i;
+
+	for (i = 0; i < 3500; i++) {
+		if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+			break;
+		udelay (100);
+	}
+	MFREG(UART0_SDR, reg);
+	reg &= ~CR0_MASK;
+
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+	reg |= CR0_EXTCLK_ENA;
+	udiv = 1;
+	tmp  = gd->baudrate * 16;
+	bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+	/* For 440, the cpu clock is on divider chain A, UART on divider
+	 * chain B ... so cpu clock is irrelevant. Get the "optimized"
+	 * values that are subject to the 1/2 opb clock constraint
+	 */
+	serial_divs (gd->baudrate, &udiv, &bdiv);
+#endif
+
+	reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS;	/* set the UART divisor */
+
+	/*
+	 * Configure input clock to baudrate generator for all
+	 * available serial ports here
+	 */
+	MTREG(UART0_SDR, reg);
+#if defined(UART1_SDR)
+	MTREG(UART1_SDR, reg);
+#endif
+#if defined(UART2_SDR)
+	MTREG(UART2_SDR, reg);
+#endif
+#if defined(UART3_SDR)
+	MTREG(UART3_SDR, reg);
+#endif
+
+	out8(dev_base + UART_LCR, 0x80);	/* set DLAB bit */
+	out8(dev_base + UART_DLL, bdiv);	/* set baudrate divisor */
+	out8(dev_base + UART_DLM, bdiv >> 8);	/* set baudrate divisor */
+	out8(dev_base + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
+	out8(dev_base + UART_FCR, 0x00);	/* disable FIFO */
+	out8(dev_base + UART_MCR, 0x10);	/* enable loopback mode */
+	val = in8(dev_base + UART_LSR);		/* clear line status */
+	val = in8(dev_base + UART_RBR);		/* read receive buffer */
+	out8(dev_base + UART_SCR, 0x00);	/* set scratchpad */
+	out8(dev_base + UART_IER, 0x00);	/* set interrupt enable reg */
+
+	return 0;
+}
+
+#else /* CONFIG_440 */
+
+static int uart_post_init (unsigned long dev_base)
+{
+	unsigned long reg;
+	unsigned long tmp;
+	unsigned long clk;
+	unsigned long udiv;
+	unsigned short bdiv;
+	volatile char val;
+	int i;
+
+	for (i = 0; i < 3500; i++) {
+		if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+			break;
+		udelay (100);
+	}
+
+#if defined(CONFIG_405EZ)
+	serial_divs(gd->baudrate, &udiv, &bdiv);
+	clk = tmp = reg = 0;
+#else
+#ifdef CONFIG_405EP
+	reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
+	clk = gd->cpu_clk;
+	tmp = CONFIG_SYS_BASE_BAUD * 16;
+	udiv = (clk + tmp / 2) / tmp;
+	if (udiv > UDIV_MAX)                    /* max. n bits for udiv */
+		udiv = UDIV_MAX;
+	reg |= (udiv) << UCR0_UDIV_POS;	        /* set the UART divisor */
+	reg |= (udiv) << UCR1_UDIV_POS;	        /* set the UART divisor */
+	mtdcr (CPC0_UCR, reg);
+#else /* CONFIG_405EP */
+	reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+	clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
+	udiv = 1;
+	reg |= CR0_EXTCLK_ENA;
+#else
+	clk = gd->cpu_clk;
+#ifdef CONFIG_SYS_405_UART_ERRATA_59
+	udiv = 31;			/* Errata 59: stuck at 31 */
+#else
+	tmp = CONFIG_SYS_BASE_BAUD * 16;
+	udiv = (clk + tmp / 2) / tmp;
+	if (udiv > UDIV_MAX)                    /* max. n bits for udiv */
+		udiv = UDIV_MAX;
+#endif
+#endif
+	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
+	mtdcr (CPC0_CR0, reg);
+#endif /* CONFIG_405EP */
+	tmp = gd->baudrate * udiv * 16;
+	bdiv = (clk + tmp / 2) / tmp;
+#endif /* CONFIG_405EZ */
+
+	out8(dev_base + UART_LCR, 0x80);	/* set DLAB bit */
+	out8(dev_base + UART_DLL, bdiv);	/* set baudrate divisor */
+	out8(dev_base + UART_DLM, bdiv >> 8);	/* set baudrate divisor */
+	out8(dev_base + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
+	out8(dev_base + UART_FCR, 0x00);	/* disable FIFO */
+	out8(dev_base + UART_MCR, 0x10);	/* enable loopback mode */
+	val = in8(dev_base + UART_LSR);	/* clear line status */
+	val = in8(dev_base + UART_RBR);	/* read receive buffer */
+	out8(dev_base + UART_SCR, 0x00);	/* set scratchpad */
+	out8(dev_base + UART_IER, 0x00);	/* set interrupt enable reg */
+
+	return (0);
+}
+#endif /* CONFIG_440 */
+
+static void uart_post_putc (unsigned long dev_base, char c)
+{
+	int i;
+
+	out8 (dev_base + UART_THR, c);	/* put character out */
+
+	/* Wait for transfer completion */
+	for (i = 0; i < 3500; i++) {
+		if (in8 (dev_base + UART_LSR) & asyncLSRTxHoldEmpty1)
+			break;
+		udelay (100);
+	}
+}
+
+static int uart_post_getc (unsigned long dev_base)
+{
+	int i;
+
+	/* Wait for character available */
+	for (i = 0; i < 3500; i++) {
+		if (in8 (dev_base + UART_LSR) & asyncLSRDataReady1)
+			break;
+		udelay (100);
+	}
+	return 0xff & in8 (dev_base + UART_RBR);
+}
+
+static int test_ctlr (unsigned long dev_base, int index)
+{
+	int res = -1;
+	char test_str[] = "*** UART Test String ***\r\n";
+	int i;
+
+	uart_post_init (dev_base);
+
+	for (i = 0; i < sizeof (test_str) - 1; i++) {
+		uart_post_putc (dev_base, test_str[i]);
+		if (uart_post_getc (dev_base) != test_str[i])
+			goto done;
+	}
+	res = 0;
+done:
+	if (res)
+		post_log ("uart%d test failed\n", index);
+
+	return res;
+}
+
+int uart_post_test (int flags)
+{
+	int i, res = 0;
+	static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE;
+
+	for (i = 0; i < sizeof (base) / sizeof (base[0]); i++) {
+		if (test_ctlr (base[i], i))
+			res = -1;
+	}
+	serial_reinit_all ();
+
+	return res;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */
diff --git a/roms/u-boot-sam460ex/post/cpu/ppc4xx/watchdog.c b/roms/u-boot-sam460ex/post/cpu/ppc4xx/watchdog.c
new file mode 100644
index 000000000..221adfc11
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/cpu/ppc4xx/watchdog.c
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Igor Lisitsin <igor@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Watchdog test
+ *
+ * The test verifies the watchdog timer operation.
+ * On the first iteration, the test routine disables interrupts and
+ * makes a 10-second delay. If the system does not reboot during this delay,
+ * the watchdog timer is not operational and the test fails. If the system
+ * reboots, on the second iteration the test routine reports a success.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
+
+#include <watchdog.h>
+
+int watchdog_post_test (int flags)
+{
+	if (flags & POST_REBOOT) {
+		/* Test passed */
+		return 0;
+	}
+	else {
+		/* 10-second delay */
+		int ints = disable_interrupts ();
+		ulong base = post_time_ms (0);
+
+		while (post_time_ms (base) < 10000)
+			;
+		if (ints)
+			enable_interrupts ();
+
+		/*
+		 * If we have reached this point, the watchdog timer
+		 * does not work
+		 */
+		return -1;
+	}
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */
diff --git a/roms/u-boot-sam460ex/post/drivers/Makefile b/roms/u-boot-sam460ex/post/drivers/Makefile
new file mode 100644
index 000000000..0b6cdf58c
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/drivers/Makefile
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB	= libpostdrivers.a
+
+COBJS-$(CONFIG_HAS_POST)	+= i2c.o memory.o rtc.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/drivers/i2c.c b/roms/u-boot-sam460ex/post/drivers/i2c.c
new file mode 100644
index 000000000..b152deaf6
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/drivers/i2c.c
@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * I2C test
+ *
+ * For verifying the I2C bus, a full I2C bus scanning is performed.
+ *
+ * #ifdef I2C_ADDR_LIST
+ *   The test is considered as passed if all the devices and
+ *   only the devices in the list are found.
+ * #else [ ! I2C_ADDR_LIST ]
+ *   The test is considered as passed if any I2C device is found.
+ * #endif
+ */
+
+#include <post.h>
+#include <i2c.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_I2C
+
+int i2c_post_test (int flags)
+{
+	unsigned int i;
+	unsigned int good = 0;
+#ifdef I2C_ADDR_LIST
+	unsigned int bad  = 0;
+	int j;
+	unsigned char i2c_addr_list[] = I2C_ADDR_LIST;
+	unsigned char i2c_miss_list[] = I2C_ADDR_LIST;
+#endif
+
+	for (i = 0; i < 128; i++) {
+		if (i2c_probe (i) == 0) {
+#ifndef	I2C_ADDR_LIST
+			good++;
+#else	/* I2C_ADDR_LIST */
+			for (j=0; j<sizeof(i2c_addr_list); ++j) {
+				if (i == i2c_addr_list[j]) {
+					good++;
+					i2c_miss_list[j] = 0xFF;
+					break;
+				}
+			}
+			if (j == sizeof(i2c_addr_list)) {
+				bad++;
+				post_log ("I2C: addr %02X not expected\n",
+						i);
+			}
+#endif	/* I2C_ADDR_LIST */
+		}
+	}
+
+#ifndef	I2C_ADDR_LIST
+	return good > 0 ? 0 : -1;
+#else	/* I2C_ADDR_LIST */
+	if (good != sizeof(i2c_addr_list)) {
+		for (j=0; j<sizeof(i2c_miss_list); ++j) {
+			if (i2c_miss_list[j] != 0xFF) {
+				post_log ("I2C: addr %02X did not respond\n",
+						i2c_miss_list[j]);
+			}
+		}
+	}
+	return ((good == sizeof(i2c_addr_list)) && (bad == 0)) ? 0 : -1;
+#endif
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_I2C */
diff --git a/roms/u-boot-sam460ex/post/drivers/memory.c b/roms/u-boot-sam460ex/post/drivers/memory.c
new file mode 100644
index 000000000..006236009
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/drivers/memory.c
@@ -0,0 +1,483 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* Memory test
+ *
+ * General observations:
+ * o The recommended test sequence is to test the data lines: if they are
+ *   broken, nothing else will work properly.  Then test the address
+ *   lines.  Finally, test the cells in the memory now that the test
+ *   program knows that the address and data lines work properly.
+ *   This sequence also helps isolate and identify what is faulty.
+ *
+ * o For the address line test, it is a good idea to use the base
+ *   address of the lowest memory location, which causes a '1' bit to
+ *   walk through a field of zeros on the address lines and the highest
+ *   memory location, which causes a '0' bit to walk through a field of
+ *   '1's on the address line.
+ *
+ * o Floating buses can fool memory tests if the test routine writes
+ *   a value and then reads it back immediately.  The problem is, the
+ *   write will charge the residual capacitance on the data bus so the
+ *   bus retains its state briefely.  When the test program reads the
+ *   value back immediately, the capacitance of the bus can allow it
+ *   to read back what was written, even though the memory circuitry
+ *   is broken.  To avoid this, the test program should write a test
+ *   pattern to the target location, write a different pattern elsewhere
+ *   to charge the residual capacitance in a differnt manner, then read
+ *   the target location back.
+ *
+ * o Always read the target location EXACTLY ONCE and save it in a local
+ *   variable.  The problem with reading the target location more than
+ *   once is that the second and subsequent reads may work properly,
+ *   resulting in a failed test that tells the poor technician that
+ *   "Memory error at 00000000, wrote aaaaaaaa, read aaaaaaaa" which
+ *   doesn't help him one bit and causes puzzled phone calls.  Been there,
+ *   done that.
+ *
+ * Data line test:
+ * ---------------
+ * This tests data lines for shorts and opens by forcing adjacent data
+ * to opposite states. Because the data lines could be routed in an
+ * arbitrary manner the must ensure test patterns ensure that every case
+ * is tested. By using the following series of binary patterns every
+ * combination of adjacent bits is test regardless of routing.
+ *
+ *     ...101010101010101010101010
+ *     ...110011001100110011001100
+ *     ...111100001111000011110000
+ *     ...111111110000000011111111
+ *
+ * Carrying this out, gives us six hex patterns as follows:
+ *
+ *     0xaaaaaaaaaaaaaaaa
+ *     0xcccccccccccccccc
+ *     0xf0f0f0f0f0f0f0f0
+ *     0xff00ff00ff00ff00
+ *     0xffff0000ffff0000
+ *     0xffffffff00000000
+ *
+ * To test for short and opens to other signals on our boards, we
+ * simply test with the 1's complemnt of the paterns as well, resulting
+ * in twelve patterns total.
+ *
+ * After writing a test pattern. a special pattern 0x0123456789ABCDEF is
+ * written to a different address in case the data lines are floating.
+ * Thus, if a byte lane fails, you will see part of the special
+ * pattern in that byte lane when the test runs.  For example, if the
+ * xx__xxxxxxxxxxxx byte line fails, you will see aa23aaaaaaaaaaaa
+ * (for the 'a' test pattern).
+ *
+ * Address line test:
+ * ------------------
+ *  This function performs a test to verify that all the address lines
+ *  hooked up to the RAM work properly.  If there is an address line
+ *  fault, it usually shows up as two different locations in the address
+ *  map (related by the faulty address line) mapping to one physical
+ *  memory storage location.  The artifact that shows up is writing to
+ *  the first location "changes" the second location.
+ *
+ * To test all address lines, we start with the given base address and
+ * xor the address with a '1' bit to flip one address line.  For each
+ * test, we shift the '1' bit left to test the next address line.
+ *
+ * In the actual code, we start with address sizeof(ulong) since our
+ * test pattern we use is a ulong and thus, if we tried to test lower
+ * order address bits, it wouldn't work because our pattern would
+ * overwrite itself.
+ *
+ * Example for a 4 bit address space with the base at 0000:
+ *   0000 <- base
+ *   0001 <- test 1
+ *   0010 <- test 2
+ *   0100 <- test 3
+ *   1000 <- test 4
+ * Example for a 4 bit address space with the base at 0010:
+ *   0010 <- base
+ *   0011 <- test 1
+ *   0000 <- (below the base address, skipped)
+ *   0110 <- test 2
+ *   1010 <- test 3
+ *
+ * The test locations are successively tested to make sure that they are
+ * not "mirrored" onto the base address due to a faulty address line.
+ * Note that the base and each test location are related by one address
+ * line flipped.  Note that the base address need not be all zeros.
+ *
+ * Memory tests 1-4:
+ * -----------------
+ * These tests verify RAM using sequential writes and reads
+ * to/from RAM. There are several test cases that use different patterns to
+ * verify RAM. Each test case fills a region of RAM with one pattern and
+ * then reads the region back and compares its contents with the pattern.
+ * The following patterns are used:
+ *
+ *  1a) zero pattern (0x00000000)
+ *  1b) negative pattern (0xffffffff)
+ *  1c) checkerboard pattern (0x55555555)
+ *  1d) checkerboard pattern (0xaaaaaaaa)
+ *  2)  bit-flip pattern ((1 << (offset % 32))
+ *  3)  address pattern (offset)
+ *  4)  address pattern (~offset)
+ *
+ * Being run in normal mode, the test verifies only small 4Kb
+ * regions of RAM around each 1Mb boundary. For example, for 64Mb
+ * RAM the following areas are verified: 0x00000000-0x00000800,
+ * 0x000ff800-0x00100800, 0x001ff800-0x00200800, ..., 0x03fff800-
+ * 0x04000000. If the test is run in slow-test mode, it verifies
+ * the whole RAM.
+ */
+
+#include <post.h>
+#include <watchdog.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Define INJECT_*_ERRORS for testing error detection in the presence of
+ * _good_ hardware.
+ */
+#undef  INJECT_DATA_ERRORS
+#undef  INJECT_ADDRESS_ERRORS
+
+#ifdef INJECT_DATA_ERRORS
+#warning "Injecting data line errors for testing purposes"
+#endif
+
+#ifdef INJECT_ADDRESS_ERRORS
+#warning "Injecting address line errors for testing purposes"
+#endif
+
+
+/*
+ * This function performs a double word move from the data at
+ * the source pointer to the location at the destination pointer.
+ * This is helpful for testing memory on processors which have a 64 bit
+ * wide data bus.
+ *
+ * On those PowerPC with FPU, use assembly and a floating point move:
+ * this does a 64 bit move.
+ *
+ * For other processors, let the compiler generate the best code it can.
+ */
+static void move64(const unsigned long long *src, unsigned long long *dest)
+{
+#if defined(CONFIG_MPC8260) || defined(CONFIG_MPC824X)
+	asm ("lfd  0, 0(3)\n\t" /* fpr0	  =  *scr	*/
+	 "stfd 0, 0(4)"		/* *dest  =  fpr0	*/
+	 : : : "fr0" );		/* Clobbers fr0		*/
+    return;
+#else
+	*dest = *src;
+#endif
+}
+
+/*
+ * This is 64 bit wide test patterns.  Note that they reside in ROM
+ * (which presumably works) and the tests write them to RAM which may
+ * not work.
+ *
+ * The "otherpattern" is written to drive the data bus to values other
+ * than the test pattern.  This is for detecting floating bus lines.
+ *
+ */
+const static unsigned long long pattern[] = {
+	0xaaaaaaaaaaaaaaaaULL,
+	0xccccccccccccccccULL,
+	0xf0f0f0f0f0f0f0f0ULL,
+	0xff00ff00ff00ff00ULL,
+	0xffff0000ffff0000ULL,
+	0xffffffff00000000ULL,
+	0x00000000ffffffffULL,
+	0x0000ffff0000ffffULL,
+	0x00ff00ff00ff00ffULL,
+	0x0f0f0f0f0f0f0f0fULL,
+	0x3333333333333333ULL,
+	0x5555555555555555ULL
+};
+const unsigned long long otherpattern = 0x0123456789abcdefULL;
+
+
+static int memory_post_dataline(unsigned long long * pmem)
+{
+	unsigned long long temp64 = 0;
+	int num_patterns = sizeof(pattern)/ sizeof(pattern[0]);
+	int i;
+	unsigned int hi, lo, pathi, patlo;
+	int ret = 0;
+
+	for ( i = 0; i < num_patterns; i++) {
+		move64(&(pattern[i]), pmem++);
+		/*
+		 * Put a different pattern on the data lines: otherwise they
+		 * may float long enough to read back what we wrote.
+		 */
+		move64(&otherpattern, pmem--);
+		move64(pmem, &temp64);
+
+#ifdef INJECT_DATA_ERRORS
+		temp64 ^= 0x00008000;
+#endif
+
+		if (temp64 != pattern[i]){
+			pathi = (pattern[i]>>32) & 0xffffffff;
+			patlo = pattern[i] & 0xffffffff;
+
+			hi = (temp64>>32) & 0xffffffff;
+			lo = temp64 & 0xffffffff;
+
+			post_log ("Memory (date line) error at %08x, "
+				  "wrote %08x%08x, read %08x%08x !\n",
+					  pmem, pathi, patlo, hi, lo);
+			ret = -1;
+		}
+	}
+	return ret;
+}
+
+static int memory_post_addrline(ulong *testaddr, ulong *base, ulong size)
+{
+	ulong *target;
+	ulong *end;
+	ulong readback;
+	ulong xor;
+	int   ret = 0;
+
+	end = (ulong *)((ulong)base + size);	/* pointer arith! */
+	xor = 0;
+	for(xor = sizeof(ulong); xor > 0; xor <<= 1) {
+		target = (ulong *)((ulong)testaddr ^ xor);
+		if((target >= base) && (target < end)) {
+			*testaddr = ~*target;
+			readback  = *target;
+
+#ifdef INJECT_ADDRESS_ERRORS
+			if(xor == 0x00008000) {
+				readback = *testaddr;
+			}
+#endif
+			if(readback == *testaddr) {
+				post_log ("Memory (address line) error at %08x<->%08x, "
+					"XOR value %08x !\n",
+					testaddr, target, xor);
+				ret = -1;
+			}
+		}
+	}
+	return ret;
+}
+
+static int memory_post_test1 (unsigned long start,
+			      unsigned long size,
+			      unsigned long val)
+{
+	unsigned long i;
+	ulong *mem = (ulong *) start;
+	ulong readback;
+	int ret = 0;
+
+	for (i = 0; i < size / sizeof (ulong); i++) {
+		mem[i] = val;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET ();
+	}
+
+	for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) {
+		readback = mem[i];
+		if (readback != val) {
+			post_log ("Memory error at %08x, "
+				  "wrote %08x, read %08x !\n",
+					  mem + i, val, readback);
+
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET ();
+	}
+
+	return ret;
+}
+
+static int memory_post_test2 (unsigned long start, unsigned long size)
+{
+	unsigned long i;
+	ulong *mem = (ulong *) start;
+	ulong readback;
+	int ret = 0;
+
+	for (i = 0; i < size / sizeof (ulong); i++) {
+		mem[i] = 1 << (i % 32);
+		if (i % 1024 == 0)
+			WATCHDOG_RESET ();
+	}
+
+	for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) {
+		readback = mem[i];
+		if (readback != (1 << (i % 32))) {
+			post_log ("Memory error at %08x, "
+				  "wrote %08x, read %08x !\n",
+					  mem + i, 1 << (i % 32), readback);
+
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET ();
+	}
+
+	return ret;
+}
+
+static int memory_post_test3 (unsigned long start, unsigned long size)
+{
+	unsigned long i;
+	ulong *mem = (ulong *) start;
+	ulong readback;
+	int ret = 0;
+
+	for (i = 0; i < size / sizeof (ulong); i++) {
+		mem[i] = i;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET ();
+	}
+
+	for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) {
+		readback = mem[i];
+		if (readback != i) {
+			post_log ("Memory error at %08x, "
+				  "wrote %08x, read %08x !\n",
+					  mem + i, i, readback);
+
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET ();
+	}
+
+	return ret;
+}
+
+static int memory_post_test4 (unsigned long start, unsigned long size)
+{
+	unsigned long i;
+	ulong *mem = (ulong *) start;
+	ulong readback;
+	int ret = 0;
+
+	for (i = 0; i < size / sizeof (ulong); i++) {
+		mem[i] = ~i;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET ();
+	}
+
+	for (i = 0; i < size / sizeof (ulong) && ret == 0; i++) {
+		readback = mem[i];
+		if (readback != ~i) {
+			post_log ("Memory error at %08x, "
+				  "wrote %08x, read %08x !\n",
+					  mem + i, ~i, readback);
+
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET ();
+	}
+
+	return ret;
+}
+
+static int memory_post_tests (unsigned long start, unsigned long size)
+{
+	int ret = 0;
+
+	if (ret == 0)
+		ret = memory_post_dataline ((unsigned long long *)start);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_addrline ((ulong *)start, (ulong *)start, size);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_addrline ((ulong *)(start + size - 8),
+					    (ulong *)start, size);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_test1 (start, size, 0x00000000);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_test1 (start, size, 0xffffffff);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_test1 (start, size, 0x55555555);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_test1 (start, size, 0xaaaaaaaa);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_test2 (start, size);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_test3 (start, size);
+	WATCHDOG_RESET ();
+	if (ret == 0)
+		ret = memory_post_test4 (start, size);
+	WATCHDOG_RESET ();
+
+	return ret;
+}
+
+int memory_post_test (int flags)
+{
+	int ret = 0;
+	bd_t *bd = gd->bd;
+	unsigned long memsize = (bd->bi_memsize >= 256 << 20 ?
+				 256 << 20 : bd->bi_memsize) - (1 << 20);
+
+	/* Limit area to be tested with the board info struct */
+	if (CONFIG_SYS_SDRAM_BASE + memsize > (ulong)bd)
+		memsize = (ulong)bd - CONFIG_SYS_SDRAM_BASE;
+
+	if (flags & POST_SLOWTEST) {
+		ret = memory_post_tests (CONFIG_SYS_SDRAM_BASE, memsize);
+	} else {			/* POST_NORMAL */
+
+		unsigned long i;
+
+		for (i = 0; i < (memsize >> 20) && ret == 0; i++) {
+			if (ret == 0)
+				ret = memory_post_tests (i << 20, 0x800);
+			if (ret == 0)
+				ret = memory_post_tests ((i << 20) + 0xff800, 0x800);
+		}
+	}
+
+	return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
diff --git a/roms/u-boot-sam460ex/post/drivers/rtc.c b/roms/u-boot-sam460ex/post/drivers/rtc.c
new file mode 100644
index 000000000..8b0f463b8
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/drivers/rtc.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * RTC test
+ *
+ * The Real Time Clock (RTC) operation is verified by this test.
+ * The following features are verified:
+ *   o) RTC Power Fault
+ *	This is verified by analyzing the rtc_get() return status.
+ *   o) Time uniformity
+ *      This is verified by reading RTC in polling within
+ *      a short period of time.
+ *   o) Passing month boundaries
+ *      This is checked by setting RTC to a second before
+ *      a month boundary and reading it after its passing the
+ *      boundary. The test is performed for both leap- and
+ *      nonleap-years.
+ */
+
+#include <post.h>
+#include <rtc.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_RTC
+
+static int rtc_post_skip (ulong * diff)
+{
+	struct rtc_time tm1;
+	struct rtc_time tm2;
+	ulong start1;
+	ulong start2;
+
+	rtc_get (&tm1);
+	start1 = get_timer (0);
+
+	while (1) {
+		rtc_get (&tm2);
+		start2 = get_timer (0);
+		if (tm1.tm_sec != tm2.tm_sec)
+			break;
+		if (start2 - start1 > 1500)
+			break;
+	}
+
+	if (tm1.tm_sec != tm2.tm_sec) {
+		*diff = start2 - start1;
+
+		return 0;
+	} else {
+		return -1;
+	}
+}
+
+static void rtc_post_restore (struct rtc_time *tm, unsigned int sec)
+{
+	time_t t = mktime (tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour,
+					   tm->tm_min, tm->tm_sec) + sec;
+	struct rtc_time ntm;
+
+	to_tm (t, &ntm);
+
+	rtc_set (&ntm);
+}
+
+int rtc_post_test (int flags)
+{
+	ulong diff;
+	unsigned int i;
+	struct rtc_time svtm;
+	static unsigned int daysnl[] =
+			{ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+	static unsigned int daysl[] =
+			{ 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+	unsigned int ynl = 1999;
+	unsigned int yl = 2000;
+	unsigned int skipped = 0;
+	int reliable;
+
+	/* Time reliability */
+	reliable = rtc_get (&svtm);
+
+	/* Time uniformity */
+	if (rtc_post_skip (&diff) != 0) {
+		post_log ("Timeout while waiting for a new second !\n");
+
+		return -1;
+	}
+
+	for (i = 0; i < 5; i++) {
+		if (rtc_post_skip (&diff) != 0) {
+			post_log ("Timeout while waiting for a new second !\n");
+
+			return -1;
+		}
+
+		if (diff < 950 || diff > 1050) {
+			post_log ("Invalid second duration !\n");
+
+			return -1;
+		}
+	}
+
+	/* Passing month boundaries */
+
+	if (rtc_post_skip (&diff) != 0) {
+		post_log ("Timeout while waiting for a new second !\n");
+
+		return -1;
+	}
+	rtc_get (&svtm);
+
+	for (i = 0; i < 12; i++) {
+		time_t t = mktime (ynl, i + 1, daysnl[i], 23, 59, 59);
+		struct rtc_time tm;
+
+		to_tm (t, &tm);
+		rtc_set (&tm);
+
+		skipped++;
+		if (rtc_post_skip (&diff) != 0) {
+			rtc_post_restore (&svtm, skipped);
+			post_log ("Timeout while waiting for a new second !\n");
+
+			return -1;
+		}
+
+		rtc_get (&tm);
+		if (tm.tm_mon == i + 1) {
+			rtc_post_restore (&svtm, skipped);
+			post_log ("Month %d boundary is not passed !\n", i + 1);
+
+			return -1;
+		}
+	}
+
+	for (i = 0; i < 12; i++) {
+		time_t t = mktime (yl, i + 1, daysl[i], 23, 59, 59);
+		struct rtc_time tm;
+
+		to_tm (t, &tm);
+		rtc_set (&tm);
+
+		skipped++;
+		if (rtc_post_skip (&diff) != 0) {
+			rtc_post_restore (&svtm, skipped);
+			post_log ("Timeout while waiting for a new second !\n");
+
+			return -1;
+		}
+
+		rtc_get (&tm);
+		if (tm.tm_mon == i + 1) {
+			rtc_post_restore (&svtm, skipped);
+			post_log ("Month %d boundary is not passed !\n", i + 1);
+
+			return -1;
+		}
+	}
+	rtc_post_restore (&svtm, skipped);
+
+	/* If come here, then RTC operates correcty, check the correctness
+	 * of the time it reports.
+	 */
+	if (reliable < 0) {
+		post_log ("RTC Time is not reliable! Power fault? \n");
+
+		return -1;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_RTC */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/Makefile b/roms/u-boot-sam460ex/post/lib_powerpc/Makefile
new file mode 100644
index 000000000..0cd15cfa1
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/Makefile
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB	= libpost$(ARCH).a
+
+AOBJS-$(CONFIG_HAS_POST)	+= asm.o
+COBJS-$(CONFIG_HAS_POST)	+= cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o
+COBJS-$(CONFIG_HAS_POST)   += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o
+COBJS-$(CONFIG_HAS_POST)	+= store.o load.o cr.o b.o multi.o string.o complex.o
+
+include $(TOPDIR)/post/rules.mk
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/andi.c b/roms/u-boot-sam460ex/post/lib_powerpc/andi.c
new file mode 100644
index 000000000..52ec7c4d4
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/andi.c
@@ -0,0 +1,120 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Logic instructions:		andi., andis.
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_andi_s
+{
+    ulong cmd;
+    ulong op1;
+    ushort op2;
+    ulong res;
+} cpu_post_andi_table[] =
+{
+    {
+	OP_ANDI_,
+	0x80008000,
+	0xffff,
+	0x00008000
+    },
+    {
+	OP_ANDIS_,
+	0x80008000,
+	0xffff,
+	0x80000000
+    },
+};
+static unsigned int cpu_post_andi_size =
+    sizeof (cpu_post_andi_table) / sizeof (struct cpu_post_andi_s);
+
+int cpu_post_test_andi (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_andi_size && ret == 0; i++)
+    {
+	struct cpu_post_andi_s *test = cpu_post_andi_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_11IX(test->cmd, reg1, reg0, test->op2),
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+	    ret = res == test->res &&
+		  (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+	    if (ret != 0)
+	    {
+	        post_log ("Error at andi test %d !\n", i);
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/asm.S b/roms/u-boot-sam460ex/post/lib_powerpc/asm.S
new file mode 100644
index 000000000..f6b329aa4
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/asm.S
@@ -0,0 +1,358 @@
+/*
+ *  Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#include <post.h>
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+/* void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2); */
+	.global	cpu_post_exec_02
+cpu_post_exec_02:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+
+	subi	r1, r1, 104
+	stmw	r6, 0(r1)
+
+	mtlr	r3
+	mr	r3, r4
+	mr	r4, r5
+	blrl
+
+	lmw	r6, 0(r1)
+	addi	r1, r1, 104
+
+	lwz	r0, 0(r1)
+	addi	r1, r1, 4
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3, ulong op4); */
+	.global	cpu_post_exec_04
+cpu_post_exec_04:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+
+	subi	r1, r1, 96
+	stmw	r8, 0(r1)
+
+	mtlr	r3
+	mr	r3, r4
+	mr	r4, r5
+	mr	r5, r6
+	mtxer	r7
+	blrl
+
+	lmw	r8, 0(r1)
+	addi	r1, r1, 96
+
+	lwz	r0, 0(r1)
+	addi	r1, r1, 4
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2); */
+	.global	cpu_post_exec_12
+cpu_post_exec_12:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+
+	mtlr	r3
+	mr	r3, r5
+	mr	r4, r6
+	blrl
+
+	lwz	r4, 0(r1)
+	stw	r3, 0(r4)
+
+	lwz	r0, 4(r1)
+	addi	r1, r1, 8
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1); */
+	.global	cpu_post_exec_11
+cpu_post_exec_11:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+
+	mtlr	r3
+	mr	r3, r5
+	blrl
+
+	lwz	r4, 0(r1)
+	stw	r3, 0(r4)
+
+	lwz	r0, 4(r1)
+	addi	r1, r1, 8
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1); */
+	.global	cpu_post_exec_21
+cpu_post_exec_21:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+	stwu	r5, -4(r1)
+
+	li	r0, 0
+	mtxer	r0
+	lwz	r0, 0(r4)
+	mtcr	r0
+
+	mtlr	r3
+	mr	r3, r6
+	blrl
+
+	mfcr	r0
+	lwz	r4, 4(r1)
+	stw	r0, 0(r4)
+	lwz	r4, 0(r1)
+	stw	r3, 0(r4)
+
+	lwz	r0, 8(r1)
+	addi	r1, r1, 12
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+    ulong op2); */
+	.global	cpu_post_exec_22
+cpu_post_exec_22:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+	stwu	r5, -4(r1)
+
+	li	r0, 0
+	mtxer	r0
+	lwz	r0, 0(r4)
+	mtcr	r0
+
+	mtlr	r3
+	mr	r3, r6
+	mr	r4, r7
+	blrl
+
+	mfcr	r0
+	lwz	r4, 4(r1)
+	stw	r0, 0(r4)
+	lwz	r4, 0(r1)
+	stw	r3, 0(r4)
+
+	lwz	r0, 8(r1)
+	addi	r1, r1, 12
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3); */
+	.global	cpu_post_exec_12w
+cpu_post_exec_12w:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+
+	mtlr	r3
+	lwz	r3, 0(r4)
+	mr	r4, r5
+	mr	r5, r6
+	blrl
+
+	lwz	r4, 0(r1)
+	stw	r3, 0(r4)
+
+	lwz	r0, 4(r1)
+	addi	r1, r1, 8
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2); */
+	.global	cpu_post_exec_11w
+cpu_post_exec_11w:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+
+	mtlr	r3
+	lwz	r3, 0(r4)
+	mr	r4, r5
+	blrl
+
+	lwz	r4, 0(r1)
+	stw	r3, 0(r4)
+
+	lwz	r0, 4(r1)
+	addi	r1, r1, 8
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3); */
+	.global	cpu_post_exec_22w
+cpu_post_exec_22w:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+	stwu	r6, -4(r1)
+
+	mtlr	r3
+	lwz	r3, 0(r4)
+	mr	r4, r5
+	blrl
+
+	lwz	r4, 4(r1)
+	stw	r3, 0(r4)
+	lwz	r4, 0(r1)
+	stw	r5, 0(r4)
+
+	lwz	r0, 8(r1)
+	addi	r1, r1, 12
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2); */
+	.global	cpu_post_exec_21w
+cpu_post_exec_21w:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+	stwu	r5, -4(r1)
+
+	mtlr	r3
+	lwz	r3, 0(r4)
+	blrl
+
+	lwz	r5, 4(r1)
+	stw	r3, 0(r5)
+	lwz	r5, 0(r1)
+	stw	r4, 0(r5)
+
+	lwz	r0, 8(r1)
+	addi	r1, r1, 12
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3); */
+	.global	cpu_post_exec_21x
+cpu_post_exec_21x:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+	stwu	r5, -4(r1)
+
+	mtlr	r3
+	mr	r3, r6
+	blrl
+
+	lwz	r5, 4(r1)
+	stw	r3, 0(r5)
+	lwz	r5, 0(r1)
+	stw	r4, 0(r5)
+
+	lwz	r0, 8(r1)
+	addi	r1, r1, 12
+	mtlr	r0
+	blr
+
+/* void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
+    ulong cr); */
+	.global	cpu_post_exec_31
+cpu_post_exec_31:
+	isync
+	mflr	r0
+	stwu	r0, -4(r1)
+	stwu	r4, -4(r1)
+	stwu	r5, -4(r1)
+	stwu	r6, -4(r1)
+
+	mtlr	r3
+	lwz	r3, 0(r4)
+	lwz	r4, 0(r5)
+	mr	r6, r7
+
+	mfcr	r7
+	blrl
+	mtcr	r7
+
+	lwz	r7, 8(r1)
+	stw	r3, 0(r7)
+	lwz	r7, 4(r1)
+	stw	r4, 0(r7)
+	lwz	r7, 0(r1)
+	stw	r5, 0(r7)
+
+	lwz	r0, 12(r1)
+	addi	r1, r1, 16
+	mtlr	r0
+	blr
+
+/* int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n); */
+	.global	cpu_post_complex_1_asm
+cpu_post_complex_1_asm:
+	li	r9,0
+	cmpw	r9,r7
+	bge	cpu_post_complex_1_done
+	mtctr	r7
+cpu_post_complex_1_loop:
+	mullw	r0,r3,r4
+	subf	r0,r5,r0
+	divw	r0,r0,r6
+	add	r9,r9,r0
+	bdnz	cpu_post_complex_1_loop
+cpu_post_complex_1_done:
+	mr	r3,r9
+	blr
+
+/* int cpu_post_complex_2_asm (int x, int n); */
+	.global	cpu_post_complex_2_asm
+cpu_post_complex_2_asm:
+	mr.	r0,r4
+	mtctr	r0
+	mr	r0,r3
+	li	r3,1
+	li	r4,1
+	blelr
+cpu_post_complex_2_loop:
+	mullw	r3,r3,r0
+	add	r3,r3,r4
+	bdnz	cpu_post_complex_2_loop
+blr
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/b.c b/roms/u-boot-sam460ex/post/lib_powerpc/b.c
new file mode 100644
index 000000000..492fba4c5
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/b.c
@@ -0,0 +1,198 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Branch instructions:		b, bl, bc
+ *
+ * The first 2 instructions (b, bl) are verified by jumping
+ * to a fixed address and checking whether control was transfered
+ * to that very point. For the bl instruction the value of the
+ * link register is checked as well (using mfspr).
+ * To verify the bc instruction various combinations of the BI/BO
+ * fields, the CTR and the condition register values are
+ * checked. The list of such combinations is pre-built and
+ * linked in U-Boot at build time.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+extern void cpu_post_exec_31 (ulong *code, ulong *ctr, ulong *lr, ulong *jump,
+    ulong cr);
+
+static int cpu_post_test_bc (ulong cmd, ulong bo, ulong bi,
+    int pjump, int decr, int link, ulong pctr, ulong cr)
+{
+    int ret = 0;
+    ulong lr = 0;
+    ulong ctr = pctr;
+    ulong jump;
+
+    unsigned long code[] =
+    {
+	ASM_MTCR(6),
+	ASM_MFLR(6),
+	ASM_MTCTR(3),
+	ASM_MTLR(4),
+	ASM_LI(5, 1),
+	ASM_3O(cmd, bo, bi, 8),
+	ASM_LI(5, 0),
+	ASM_MFCTR(3),
+	ASM_MFLR(4),
+	ASM_MTLR(6),
+	ASM_BLR,
+    };
+
+    cpu_post_exec_31 (code, &ctr, &lr, &jump, cr);
+
+    if (ret == 0)
+	ret = pjump == jump ? 0 : -1;
+    if (ret == 0)
+    {
+	if (decr)
+	    ret = pctr == ctr + 1 ? 0 : -1;
+	else
+	    ret = pctr == ctr ? 0 : -1;
+    }
+    if (ret == 0)
+    {
+	if (link)
+	    ret = lr == (ulong) code + 24 ? 0 : -1;
+	else
+	    ret = lr == 0 ? 0 : -1;
+    }
+
+    return ret;
+}
+
+int cpu_post_test_b (void)
+{
+    int ret = 0;
+    unsigned int i;
+    int flag = disable_interrupts();
+
+    if (ret == 0)
+    {
+	ulong code[] =
+	{
+	   ASM_MFLR(4),
+	   ASM_MTLR(3),
+	   ASM_B(4),
+	   ASM_MFLR(3),
+	   ASM_MTLR(4),
+	   ASM_BLR,
+	};
+	ulong res;
+
+	cpu_post_exec_11 (code, &res, 0);
+
+	ret = res == 0 ? 0 : -1;
+
+	if (ret != 0)
+	{
+	    post_log ("Error at b1 test !\n");
+	}
+    }
+
+    if (ret == 0)
+    {
+	ulong code[] =
+	{
+	   ASM_MFLR(4),
+	   ASM_MTLR(3),
+	   ASM_BL(4),
+	   ASM_MFLR(3),
+	   ASM_MTLR(4),
+	   ASM_BLR,
+	};
+	ulong res;
+
+	cpu_post_exec_11 (code, &res, 0);
+
+	ret = res == (ulong)code + 12 ? 0 : -1;
+
+	if (ret != 0)
+	{
+	    post_log ("Error at b2 test !\n");
+	}
+    }
+
+    if (ret == 0)
+    {
+	ulong cc, cd;
+	int cond;
+	ulong ctr;
+	int link;
+
+	i = 0;
+
+	for (cc = 0; cc < 4 && ret == 0; cc++)
+	{
+	    for (cd = 0; cd < 4 && ret == 0; cd++)
+	    {
+		for (link = 0; link <= 1 && ret == 0; link++)
+		{
+		    for (cond = 0; cond <= 1 && ret == 0; cond++)
+		    {
+			for (ctr = 1; ctr <= 2 && ret == 0; ctr++)
+			{
+			    int decr = cd < 2;
+			    int cr = cond ? 0x80000000 : 0x00000000;
+			    int jumpc = cc >= 2 ||
+					(cc == 0 && !cond) ||
+					(cc == 1 && cond);
+			    int jumpd = cd >= 2 ||
+					(cd == 0 && ctr != 1) ||
+					(cd == 1 && ctr == 1);
+			    int jump = jumpc && jumpd;
+
+			    ret = cpu_post_test_bc (link ? OP_BCL : OP_BC,
+				(cc << 3) + (cd << 1), 0, jump, decr, link,
+				ctr, cr);
+
+			    if (ret != 0)
+			    {
+				post_log ("Error at b3 test %d !\n", i);
+			    }
+
+			    i++;
+			}
+		    }
+		}
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/cmp.c b/roms/u-boot-sam460ex/post/lib_powerpc/cmp.c
new file mode 100644
index 000000000..5f6a3b904
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/cmp.c
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Integer compare instructions:	cmpw, cmplw
+ *
+ * To verify these instructions the test runs them with
+ * different combinations of operands, reads the condition
+ * register value and compares it with the expected one.
+ * The test contains a pre-built table
+ * containing the description of each test case: the instruction,
+ * the values of the operands, the condition field to save
+ * the result in and the expected result.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_12 (ulong *code, ulong *res, ulong op1, ulong op2);
+
+static struct cpu_post_cmp_s
+{
+    ulong cmd;
+    ulong op1;
+    ulong op2;
+    ulong cr;
+    ulong res;
+} cpu_post_cmp_table[] =
+{
+    {
+	OP_CMPW,
+	123,
+	123,
+	2,
+	0x02
+    },
+    {
+	OP_CMPW,
+	123,
+	133,
+	3,
+	0x08
+    },
+    {
+	OP_CMPW,
+	123,
+	-133,
+	4,
+	0x04
+    },
+    {
+	OP_CMPLW,
+	123,
+	123,
+	2,
+	0x02
+    },
+    {
+	OP_CMPLW,
+	123,
+	-133,
+	3,
+	0x08
+    },
+    {
+	OP_CMPLW,
+	123,
+	113,
+	4,
+	0x04
+    },
+};
+static unsigned int cpu_post_cmp_size =
+    sizeof (cpu_post_cmp_table) / sizeof (struct cpu_post_cmp_s);
+
+int cpu_post_test_cmp (void)
+{
+    int ret = 0;
+    unsigned int i;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_cmp_size && ret == 0; i++)
+    {
+	struct cpu_post_cmp_s *test = cpu_post_cmp_table + i;
+	unsigned long code[] =
+	{
+	    ASM_2C(test->cmd, test->cr, 3, 4),
+	    ASM_MFCR(3),
+	    ASM_BLR
+	};
+	ulong res;
+
+	cpu_post_exec_12 (code, & res, test->op1, test->op2);
+
+	ret = ((res >> (28 - 4 * test->cr)) & 0xe) == test->res ? 0 : -1;
+
+	if (ret != 0)
+	{
+	    post_log ("Error at cmp test %d !\n", i);
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/cmpi.c b/roms/u-boot-sam460ex/post/lib_powerpc/cmpi.c
new file mode 100644
index 000000000..1a2fc3d09
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/cmpi.c
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Integer compare instructions:	cmpwi, cmplwi
+ *
+ * To verify these instructions the test runs them with
+ * different combinations of operands, reads the condition
+ * register value and compares it with the expected one.
+ * The test contains a pre-built table
+ * containing the description of each test case: the instruction,
+ * the values of the operands, the condition field to save
+ * the result in and the expected result.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+
+static struct cpu_post_cmpi_s
+{
+    ulong cmd;
+    ulong op1;
+    ushort op2;
+    ulong cr;
+    ulong res;
+} cpu_post_cmpi_table[] =
+{
+    {
+	OP_CMPWI,
+	123,
+	123,
+	2,
+	0x02
+    },
+    {
+	OP_CMPWI,
+	123,
+	133,
+	3,
+	0x08
+    },
+    {
+	OP_CMPWI,
+	123,
+	-133,
+	4,
+	0x04
+    },
+    {
+	OP_CMPLWI,
+	123,
+	123,
+	2,
+	0x02
+    },
+    {
+	OP_CMPLWI,
+	123,
+	-133,
+	3,
+	0x08
+    },
+    {
+	OP_CMPLWI,
+	123,
+	113,
+	4,
+	0x04
+    },
+};
+static unsigned int cpu_post_cmpi_size =
+    sizeof (cpu_post_cmpi_table) / sizeof (struct cpu_post_cmpi_s);
+
+int cpu_post_test_cmpi (void)
+{
+    int ret = 0;
+    unsigned int i;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_cmpi_size && ret == 0; i++)
+    {
+	struct cpu_post_cmpi_s *test = cpu_post_cmpi_table + i;
+	unsigned long code[] =
+	{
+	    ASM_1IC(test->cmd, test->cr, 3, test->op2),
+	    ASM_MFCR(3),
+	    ASM_BLR
+	};
+	ulong res;
+
+	cpu_post_exec_11 (code, & res, test->op1);
+
+	ret = ((res >> (28 - 4 * test->cr)) & 0xe) == test->res ? 0 : -1;
+
+	if (ret != 0)
+	{
+	    post_log ("Error at cmpi test %d !\n", i);
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/complex.c b/roms/u-boot-sam460ex/post/lib_powerpc/complex.c
new file mode 100644
index 000000000..4a3bc0003
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/complex.c
@@ -0,0 +1,127 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Complex calculations
+ *
+ * The calculations in this test are just a combination of simpler
+ * calculations, but probably under different timing conditions, etc.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern int cpu_post_complex_1_asm (int a1, int a2, int a3, int a4, int n);
+extern int cpu_post_complex_2_asm (int x, int n);
+
+  /*
+   *     n
+   *	SUM (a1 * a2 - a3) / a4 = n * result
+   *    i=1
+   */
+static int cpu_post_test_complex_1 (void)
+{
+    int a1 = 666;
+    int a2 = 667;
+    int a3 = 668;
+    int a4 = 66;
+    int n = 100;
+    int result = 6720; /* (a1 * a2 - a3) / a4 */
+
+    if (cpu_post_complex_1_asm(a1, a2, a3, a4, n) != n * result)
+    {
+	return -1;
+    }
+
+    return 0;
+}
+
+  /*	(1 + x + x^2 + ... + x^n) * (1 - x) = 1 - x^(n+1)
+   */
+static int cpu_post_test_complex_2 (void)
+{
+    int ret = -1;
+    int x;
+    int n;
+    int k;
+    int left;
+    int right;
+
+    for (x = -8; x <= 8; x ++)
+    {
+	n = 9;
+
+	left = cpu_post_complex_2_asm(x, n);
+	left *= 1 - x;
+
+	right = 1;
+	for (k = 0; k <= n; k ++)
+	{
+	    right *= x;
+	}
+	right = 1 - right;
+
+	if (left != right)
+	{
+	    goto Done;
+	}
+    }
+
+    ret = 0;
+    Done:
+
+    return ret;
+}
+
+int cpu_post_test_complex (void)
+{
+    int ret = 0;
+    int flag = disable_interrupts();
+
+    if (ret == 0)
+    {
+	ret = cpu_post_test_complex_1();
+    }
+
+    if (ret == 0)
+    {
+	ret = cpu_post_test_complex_2();
+    }
+
+    if (ret != 0)
+    {
+	post_log ("Error at complex test !\n");
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/cpu.c b/roms/u-boot-sam460ex/post/lib_powerpc/cpu.c
new file mode 100644
index 000000000..3793a60c3
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/cpu.c
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ *
+ * This test checks the arithmetic logic unit (ALU) of CPU.
+ * It tests independently various groups of instructions using
+ * run-time modification of the code to reduce the memory footprint.
+ * For more details refer to post/cpu/ *.c files.
+ */
+
+#include <watchdog.h>
+#include <post.h>
+#include <asm/mmu.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern int cpu_post_test_cmp (void);
+extern int cpu_post_test_cmpi (void);
+extern int cpu_post_test_two (void);
+extern int cpu_post_test_twox (void);
+extern int cpu_post_test_three (void);
+extern int cpu_post_test_threex (void);
+extern int cpu_post_test_threei (void);
+extern int cpu_post_test_andi (void);
+extern int cpu_post_test_srawi (void);
+extern int cpu_post_test_rlwnm (void);
+extern int cpu_post_test_rlwinm (void);
+extern int cpu_post_test_rlwimi (void);
+extern int cpu_post_test_store (void);
+extern int cpu_post_test_load (void);
+extern int cpu_post_test_cr (void);
+extern int cpu_post_test_b (void);
+extern int cpu_post_test_multi (void);
+extern int cpu_post_test_string (void);
+extern int cpu_post_test_complex (void);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+ulong cpu_post_makecr (long v)
+{
+	ulong cr = 0;
+
+	if (v < 0)
+		cr |= 0x80000000;
+	if (v > 0)
+		cr |= 0x40000000;
+	if (v == 0)
+		cr |= 0x20000000;
+
+	return cr;
+}
+
+int cpu_post_test (int flags)
+{
+	int ic = icache_status ();
+	int ret = 0;
+
+	WATCHDOG_RESET();
+	if (ic)
+		icache_disable ();
+#ifdef CONFIG_4xx_DCACHE
+	/* disable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
+#endif
+
+	if (ret == 0)
+		ret = cpu_post_test_cmp ();
+	if (ret == 0)
+		ret = cpu_post_test_cmpi ();
+	if (ret == 0)
+		ret = cpu_post_test_two ();
+	if (ret == 0)
+		ret = cpu_post_test_twox ();
+	WATCHDOG_RESET();
+	if (ret == 0)
+		ret = cpu_post_test_three ();
+	if (ret == 0)
+		ret = cpu_post_test_threex ();
+	if (ret == 0)
+		ret = cpu_post_test_threei ();
+	if (ret == 0)
+		ret = cpu_post_test_andi ();
+	WATCHDOG_RESET();
+	if (ret == 0)
+		ret = cpu_post_test_srawi ();
+	if (ret == 0)
+		ret = cpu_post_test_rlwnm ();
+	if (ret == 0)
+		ret = cpu_post_test_rlwinm ();
+	if (ret == 0)
+		ret = cpu_post_test_rlwimi ();
+	WATCHDOG_RESET();
+	if (ret == 0)
+		ret = cpu_post_test_store ();
+	if (ret == 0)
+		ret = cpu_post_test_load ();
+	if (ret == 0)
+		ret = cpu_post_test_cr ();
+	if (ret == 0)
+		ret = cpu_post_test_b ();
+	WATCHDOG_RESET();
+	if (ret == 0)
+		ret = cpu_post_test_multi ();
+	WATCHDOG_RESET();
+	if (ret == 0)
+		ret = cpu_post_test_string ();
+	if (ret == 0)
+		ret = cpu_post_test_complex ();
+	WATCHDOG_RESET();
+
+	if (ic)
+		icache_enable ();
+#ifdef CONFIG_4xx_DCACHE
+	/* enable cache */
+	change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
+#endif
+
+	WATCHDOG_RESET();
+
+	return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_CPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/cpu_asm.h b/roms/u-boot-sam460ex/post/lib_powerpc/cpu_asm.h
new file mode 100644
index 000000000..ef6fe61ef
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/cpu_asm.h
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CPU_ASM_H
+#define _CPU_ASM_H
+
+#define BIT_C				0x00000001
+
+#define OP_BLR				0x4e800020
+#define OP_EXTSB			0x7c000774
+#define OP_EXTSH			0x7c000734
+#define OP_NEG				0x7c0000d0
+#define OP_CNTLZW			0x7c000034
+#define OP_ADD				0x7c000214
+#define OP_ADDC				0x7c000014
+#define OP_ADDME			0x7c0001d4
+#define OP_ADDZE			0x7c000194
+#define OP_ADDE				0x7c000114
+#define OP_ADDI				0x38000000
+#define OP_SUBF				0x7c000050
+#define OP_SUBFC			0x7c000010
+#define OP_SUBFE			0x7c000110
+#define OP_SUBFME			0x7c0001d0
+#define OP_SUBFZE			0x7c000190
+#define OP_MFCR				0x7c000026
+#define OP_MTCR				0x7c0ff120
+#define OP_MFXER			0x7c0102a6
+#define OP_MTXER			0x7c0103a6
+#define OP_MCRXR			0x7c000400
+#define OP_MCRF				0x4c000000
+#define OP_CRAND			0x4c000202
+#define OP_CRANDC			0x4c000102
+#define OP_CROR				0x4c000382
+#define OP_CRORC			0x4c000342
+#define OP_CRXOR			0x4c000182
+#define OP_CRNAND			0x4c0001c2
+#define OP_CRNOR			0x4c000042
+#define OP_CREQV			0x4c000242
+#define OP_CMPW				0x7c000000
+#define OP_CMPLW			0x7c000040
+#define OP_CMPWI			0x2c000000
+#define OP_CMPLWI			0x28000000
+#define OP_MULLW			0x7c0001d6
+#define OP_MULHW			0x7c000096
+#define OP_MULHWU			0x7c000016
+#define OP_DIVW				0x7c0003d6
+#define OP_DIVWU			0x7c000396
+#define OP_OR				0x7c000378
+#define OP_ORC				0x7c000338
+#define OP_XOR				0x7c000278
+#define OP_NAND				0x7c0003b8
+#define OP_NOR				0x7c0000f8
+#define OP_EQV				0x7c000238
+#define OP_SLW				0x7c000030
+#define OP_SRW				0x7c000430
+#define OP_SRAW				0x7c000630
+#define OP_ORI				0x60000000
+#define OP_ORIS				0x64000000
+#define OP_XORI				0x68000000
+#define OP_XORIS			0x6c000000
+#define OP_ANDI_			0x70000000
+#define OP_ANDIS_			0x74000000
+#define OP_SRAWI			0x7c000670
+#define OP_RLWINM			0x54000000
+#define OP_RLWNM			0x5c000000
+#define OP_RLWIMI			0x50000000
+#define OP_LWZ				0x80000000
+#define OP_LHZ				0xa0000000
+#define OP_LHA				0xa8000000
+#define OP_LBZ				0x88000000
+#define OP_LWZU				0x84000000
+#define OP_LHZU				0xa4000000
+#define OP_LHAU				0xac000000
+#define OP_LBZU				0x8c000000
+#define OP_LWZX				0x7c00002e
+#define OP_LHZX				0x7c00022e
+#define OP_LHAX				0x7c0002ae
+#define OP_LBZX				0x7c0000ae
+#define OP_LWZUX			0x7c00006e
+#define OP_LHZUX			0x7c00026e
+#define OP_LHAUX			0x7c0002ee
+#define OP_LBZUX			0x7c0000ee
+#define OP_STW				0x90000000
+#define OP_STH				0xb0000000
+#define OP_STB				0x98000000
+#define OP_STWU				0x94000000
+#define OP_STHU				0xb4000000
+#define OP_STBU				0x9c000000
+#define OP_STWX				0x7c00012e
+#define OP_STHX				0x7c00032e
+#define OP_STBX				0x7c0001ae
+#define OP_STWUX			0x7c00016e
+#define OP_STHUX			0x7c00036e
+#define OP_STBUX			0x7c0001ee
+#define OP_B				0x48000000
+#define OP_BL				0x48000001
+#define OP_BC				0x40000000
+#define OP_BCL				0x40000001
+#define OP_MTLR				0x7c0803a6
+#define OP_MFLR				0x7c0802a6
+#define OP_MTCTR			0x7c0903a6
+#define OP_MFCTR			0x7c0902a6
+#define OP_LMW				0xb8000000
+#define OP_STMW				0xbc000000
+#define OP_LSWI				0x7c0004aa
+#define OP_LSWX				0x7c00042a
+#define OP_STSWI			0x7c0005aa
+#define OP_STSWX			0x7c00052a
+
+#define ASM_0(opcode)			(opcode)
+#define ASM_1(opcode, rd)		((opcode) +		\
+	                                 ((rd) << 21))
+#define ASM_1C(opcode, cr)		((opcode) +		\
+	                                 ((cr) << 23))
+#define ASM_11(opcode, rd, rs)		((opcode) +		\
+	                                 ((rd) << 21) +		\
+					 ((rs) << 16))
+#define ASM_11C(opcode, cd, cs)		((opcode) +		\
+	                                 ((cd) << 23) +		\
+					 ((cs) << 18))
+#define ASM_11X(opcode, rd, rs)		((opcode) +		\
+	                                 ((rs) << 21) +		\
+					 ((rd) << 16))
+#define ASM_11I(opcode, rd, rs, simm)	((opcode) +		\
+	                                 ((rd) << 21) +		\
+					 ((rs) << 16) +		\
+					 ((simm) & 0xffff))
+#define ASM_11IF(opcode, rd, rs, simm)	((opcode) +		\
+	                                 ((rd) << 21) +		\
+					 ((rs) << 16) +		\
+					 ((simm) << 11))
+#define ASM_11S(opcode, rd, rs, sh)	((opcode) +		\
+	                                 ((rs) << 21) +		\
+					 ((rd) << 16) +		\
+					 ((sh) << 11))
+#define ASM_11IX(opcode, rd, rs, imm)	((opcode) +		\
+	                                 ((rs) << 21) +		\
+					 ((rd) << 16) +		\
+					 ((imm) & 0xffff))
+#define ASM_12(opcode, rd, rs1, rs2)	((opcode) +		\
+	                                 ((rd) << 21) +		\
+					 ((rs1) << 16) +	\
+					 ((rs2) << 11))
+#define ASM_12F(opcode, fd, fs1, fs2)	((opcode) +		\
+	                                 ((fd) << 21) +		\
+					 ((fs1) << 16) +	\
+					 ((fs2) << 11))
+#define ASM_12X(opcode, rd, rs1, rs2)	((opcode) +		\
+	                                 ((rs1) << 21) +	\
+					 ((rd) << 16) +		\
+					 ((rs2) << 11))
+#define ASM_2C(opcode, cr, rs1, rs2)	((opcode) +		\
+	                                 ((cr) << 23) +		\
+					 ((rs1) << 16) +	\
+					 ((rs2) << 11))
+#define ASM_1IC(opcode, cr, rs, imm)	((opcode) +		\
+	                                 ((cr) << 23) +		\
+					 ((rs) << 16) +		\
+					 ((imm) & 0xffff))
+#define ASM_122(opcode, rd, rs1, rs2, imm1, imm2)		\
+					((opcode) +		\
+	                                 ((rs1) << 21) +	\
+					 ((rd) << 16) +		\
+					 ((rs2) << 11) +	\
+					 ((imm1) << 6) +	\
+					 ((imm2) << 1))
+#define ASM_113(opcode, rd, rs, imm1, imm2, imm3)		\
+					((opcode) +		\
+	                                 ((rs) << 21) +		\
+					 ((rd) << 16) +		\
+					 ((imm1) << 11) +	\
+					 ((imm2) << 6) +	\
+					 ((imm3) << 1))
+#define ASM_1O(opcode, off)		((opcode) + (off))
+#define ASM_3O(opcode, bo, bi, off)	((opcode) +		\
+					 ((bo) << 21) +		\
+					 ((bi) << 16) +		\
+					 (off))
+
+#define ASM_ADDI(rd, rs, simm)		ASM_11I(OP_ADDI, rd, rs, simm)
+#define ASM_BLR				ASM_0(OP_BLR)
+#define ASM_STW(rd, rs, simm)		ASM_11I(OP_STW, rd, rs, simm)
+#define ASM_LWZ(rd, rs, simm)		ASM_11I(OP_LWZ, rd, rs, simm)
+#define ASM_MFCR(rd)			ASM_1(OP_MFCR, rd)
+#define ASM_MTCR(rd)			ASM_1(OP_MTCR, rd)
+#define ASM_MFXER(rd)			ASM_1(OP_MFXER, rd)
+#define ASM_MTXER(rd)			ASM_1(OP_MTXER, rd)
+#define ASM_MFCTR(rd)			ASM_1(OP_MFCTR, rd)
+#define ASM_MTCTR(rd)			ASM_1(OP_MTCTR, rd)
+#define ASM_MCRXR(cr)			ASM_1C(OP_MCRXR, cr)
+#define ASM_MCRF(cd, cs)		ASM_11C(OP_MCRF, cd, cs)
+#define ASM_B(off)			ASM_1O(OP_B, off)
+#define ASM_BL(off)			ASM_1O(OP_BL, off)
+#define ASM_MFLR(rd)			ASM_1(OP_MFLR, rd)
+#define ASM_MTLR(rd)			ASM_1(OP_MTLR, rd)
+#define ASM_LI(rd, imm)			ASM_ADDI(rd, 0, imm)
+#define ASM_LMW(rd, rs, simm)		ASM_11I(OP_LMW, rd, rs, simm)
+#define ASM_STMW(rd, rs, simm)		ASM_11I(OP_STMW, rd, rs, simm)
+#define ASM_LSWI(rd, rs, simm)		ASM_11IF(OP_LSWI, rd, rs, simm)
+#define ASM_LSWX(rd, rs1, rs2)		ASM_12(OP_LSWX, rd, rs1, rs2)
+#define ASM_STSWI(rd, rs, simm)		ASM_11IF(OP_STSWI, rd, rs, simm)
+#define ASM_STSWX(rd, rs1, rs2)		ASM_12(OP_STSWX, rd, rs1, rs2)
+
+
+#endif /* _CPU_ASM_H */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/cr.c b/roms/u-boot-sam460ex/post/lib_powerpc/cr.c
new file mode 100644
index 000000000..fbee6d5c4
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/cr.c
@@ -0,0 +1,357 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Condition register istructions:	mtcr, mfcr, mcrxr,
+ *					crand, crandc, cror, crorc, crxor,
+ *					crnand, crnor, creqv, mcrf
+ *
+ * The mtcrf/mfcr instructions is tested by loading different
+ * values into the condition register (mtcrf), moving its value
+ * to a general-purpose register (mfcr) and comparing this value
+ * with the expected one.
+ * The mcrxr instruction is tested by loading a fixed value
+ * into the XER register (mtspr), moving XER value to the
+ * condition register (mcrxr), moving it to a general-purpose
+ * register (mfcr) and comparing the value of this register with
+ * the expected one.
+ * The rest of instructions is tested by loading a fixed
+ * value into the condition register (mtcrf), executing each
+ * instruction several times to modify all 4-bit condition
+ * fields, moving the value of the conditional register to a
+ * general-purpose register (mfcr) and comparing it with the
+ * expected one.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_11 (ulong *code, ulong *res, ulong op1);
+extern void cpu_post_exec_21x (ulong *code, ulong *op1, ulong *op2, ulong op3);
+
+static ulong cpu_post_cr_table1[] =
+{
+    0xaaaaaaaa,
+    0x55555555,
+};
+static unsigned int cpu_post_cr_size1 =
+    sizeof (cpu_post_cr_table1) / sizeof (ulong);
+
+static struct cpu_post_cr_s2 {
+    ulong xer;
+    ulong cr;
+} cpu_post_cr_table2[] =
+{
+    {
+	0xa0000000,
+	1
+    },
+    {
+	0x40000000,
+	5
+    },
+};
+static unsigned int cpu_post_cr_size2 =
+    sizeof (cpu_post_cr_table2) / sizeof (struct cpu_post_cr_s2);
+
+static struct cpu_post_cr_s3 {
+    ulong cr;
+    ulong cs;
+    ulong cd;
+    ulong res;
+} cpu_post_cr_table3[] =
+{
+    {
+	0x01234567,
+	0,
+	4,
+	0x01230567
+    },
+    {
+	0x01234567,
+	7,
+	0,
+	0x71234567
+    },
+};
+static unsigned int cpu_post_cr_size3 =
+    sizeof (cpu_post_cr_table3) / sizeof (struct cpu_post_cr_s3);
+
+static struct cpu_post_cr_s4 {
+    ulong cmd;
+    ulong cr;
+    ulong op1;
+    ulong op2;
+    ulong op3;
+    ulong res;
+} cpu_post_cr_table4[] =
+{
+    {
+	OP_CRAND,
+	0x0000ffff,
+	0,
+	16,
+	0,
+	0x0000ffff
+    },
+    {
+	OP_CRAND,
+	0x0000ffff,
+	16,
+	17,
+	0,
+	0x8000ffff
+    },
+    {
+	OP_CRANDC,
+	0x0000ffff,
+	0,
+	16,
+	0,
+	0x0000ffff
+    },
+    {
+	OP_CRANDC,
+	0x0000ffff,
+	16,
+	0,
+	0,
+	0x8000ffff
+    },
+    {
+	OP_CROR,
+	0x0000ffff,
+	0,
+	16,
+	0,
+	0x8000ffff
+    },
+    {
+	OP_CROR,
+	0x0000ffff,
+	0,
+	1,
+	0,
+	0x0000ffff
+    },
+    {
+	OP_CRORC,
+	0x0000ffff,
+	0,
+	16,
+	0,
+	0x0000ffff
+    },
+    {
+	OP_CRORC,
+	0x0000ffff,
+	0,
+	0,
+	0,
+	0x8000ffff
+    },
+    {
+	OP_CRXOR,
+	0x0000ffff,
+	0,
+	0,
+	0,
+	0x0000ffff
+    },
+    {
+	OP_CRXOR,
+	0x0000ffff,
+	0,
+	16,
+	0,
+	0x8000ffff
+    },
+    {
+	OP_CRNAND,
+	0x0000ffff,
+	0,
+	16,
+	0,
+	0x8000ffff
+    },
+    {
+	OP_CRNAND,
+	0x0000ffff,
+	16,
+	17,
+	0,
+	0x0000ffff
+    },
+    {
+	OP_CRNOR,
+	0x0000ffff,
+	0,
+	16,
+	0,
+	0x0000ffff
+    },
+    {
+	OP_CRNOR,
+	0x0000ffff,
+	0,
+	1,
+	0,
+	0x8000ffff
+    },
+    {
+	OP_CREQV,
+	0x0000ffff,
+	0,
+	0,
+	0,
+	0x8000ffff
+    },
+    {
+	OP_CREQV,
+	0x0000ffff,
+	0,
+	16,
+	0,
+	0x0000ffff
+    },
+};
+static unsigned int cpu_post_cr_size4 =
+    sizeof (cpu_post_cr_table4) / sizeof (struct cpu_post_cr_s4);
+
+int cpu_post_test_cr (void)
+{
+    int ret = 0;
+    unsigned int i;
+    unsigned long cr_sav;
+    int flag = disable_interrupts();
+
+    asm ( "mfcr %0" : "=r" (cr_sav) : );
+
+    for (i = 0; i < cpu_post_cr_size1 && ret == 0; i++)
+    {
+	ulong cr = cpu_post_cr_table1[i];
+	ulong res;
+
+	unsigned long code[] =
+	{
+	    ASM_MTCR(3),
+	    ASM_MFCR(3),
+	    ASM_BLR,
+	};
+
+	cpu_post_exec_11 (code, &res, cr);
+
+	ret = res == cr ? 0 : -1;
+
+	if (ret != 0)
+	{
+	    post_log ("Error at cr1 test %d !\n", i);
+	}
+    }
+
+    for (i = 0; i < cpu_post_cr_size2 && ret == 0; i++)
+    {
+	struct cpu_post_cr_s2 *test = cpu_post_cr_table2 + i;
+	ulong res;
+	ulong xer;
+
+	unsigned long code[] =
+	{
+	    ASM_MTXER(3),
+	    ASM_MCRXR(test->cr),
+	    ASM_MFCR(3),
+	    ASM_MFXER(4),
+	    ASM_BLR,
+	};
+
+	cpu_post_exec_21x (code, &res, &xer, test->xer);
+
+	ret = xer == 0 && ((res << (4 * test->cr)) & 0xe0000000) == test->xer ?
+	      0 : -1;
+
+	if (ret != 0)
+	{
+	    post_log ("Error at cr2 test %d !\n", i);
+	}
+    }
+
+    for (i = 0; i < cpu_post_cr_size3 && ret == 0; i++)
+    {
+	struct cpu_post_cr_s3 *test = cpu_post_cr_table3 + i;
+	ulong res;
+
+	unsigned long code[] =
+	{
+	    ASM_MTCR(3),
+	    ASM_MCRF(test->cd, test->cs),
+	    ASM_MFCR(3),
+	    ASM_BLR,
+	};
+
+	cpu_post_exec_11 (code, &res, test->cr);
+
+	ret = res == test->res ? 0 : -1;
+
+	if (ret != 0)
+	{
+	    post_log ("Error at cr3 test %d !\n", i);
+	}
+    }
+
+    for (i = 0; i < cpu_post_cr_size4 && ret == 0; i++)
+    {
+	struct cpu_post_cr_s4 *test = cpu_post_cr_table4 + i;
+	ulong res;
+
+	unsigned long code[] =
+	{
+	    ASM_MTCR(3),
+	    ASM_12F(test->cmd, test->op3, test->op1, test->op2),
+	    ASM_MFCR(3),
+	    ASM_BLR,
+	};
+
+	cpu_post_exec_11 (code, &res, test->cr);
+
+	ret = res == test->res ? 0 : -1;
+
+	if (ret != 0)
+	{
+	    post_log ("Error at cr4 test %d !\n", i);
+	}
+    }
+
+    asm ( "mtcr %0" : : "r" (cr_sav));
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20001122-1.c b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20001122-1.c
new file mode 100644
index 000000000..bef80c5f7
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20001122-1.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+int fpu_post_test_math1 (void)
+{
+	volatile double a, *p;
+	double c, d;
+	volatile double b;
+
+	d = 1.0;
+	p = &b;
+
+	do
+	{
+		c = d;
+		d = c * 0.5;
+		b = 1 + d;
+	} while (b != 1.0);
+
+	a = 1.0 + c;
+
+	if (a == 1.0) {
+		post_log ("Error in FPU math1 test\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20010114-2.c b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20010114-2.c
new file mode 100644
index 000000000..ee564e8d6
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20010114-2.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+static float rintf (float x)
+{
+	volatile float TWO23 = 8388608.0;
+
+	if (__builtin_fabs (x) < TWO23)
+	{
+		if (x > 0.0)
+		{
+			x += TWO23;
+			x -= TWO23;
+		}
+		else if (x < 0.0)
+		{
+			x = TWO23 - x;
+			x = -(x - TWO23);
+		}
+	}
+
+	return x;
+}
+
+int fpu_post_test_math2 (void)
+{
+	if (rintf (-1.5) != -2.0) {
+		post_log ("Error in FPU math2 test\n");
+		return -1;
+	}
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20010226-1.c b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20010226-1.c
new file mode 100644
index 000000000..099ca4a64
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/20010226-1.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+int fpu_post_test_math3 (void)
+{
+	volatile long double dfrom = 1.1;
+	volatile long double m1;
+	volatile long double m2;
+	volatile unsigned long mant_long;
+
+	m1 = dfrom / 2.0;
+	m2 = m1 * 4294967296.0;
+	mant_long = ((unsigned long) m2) & 0xffffffff;
+
+	if (mant_long != 0x8ccccccc) {
+		post_log ("Error in FPU math3 test\n");
+		return -1;
+	}
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/980619-1.c b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/980619-1.c
new file mode 100644
index 000000000..46a31aec4
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/980619-1.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+int fpu_post_test_math4 (void)
+{
+	volatile float reale = 1.0f;
+	volatile float oneplus;
+	int i;
+
+	if (sizeof (float) != 4)
+		return 0;
+
+	for (i = 0; ; i++)
+	{
+		oneplus = 1.0f + reale;
+		if (oneplus == 1.0f)
+			break;
+		reale = reale / 2.0f;
+	}
+	/* Assumes ieee754 accurate arithmetic above.  */
+	if (i != 24) {
+		post_log ("Error in FPU math4 test\n");
+		return -1;
+	}
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/Makefile b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/Makefile
new file mode 100644
index 000000000..25726db73
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/Makefile
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+include $(TOPDIR)/config.mk
+
+LIB	= libpost$(ARCH)fpu.a
+
+COBJS-$(CONFIG_HAS_POST)	+= fpu.o 20001122-1.o 20010114-2.o 20010226-1.o 980619-1.o
+COBJS-$(CONFIG_HAS_POST)	+= acc1.o compare-fp-1.o mul-subnormal-single-1.o
+
+include $(TOPDIR)/post/rules.mk
+
+CFLAGS := $(shell echo $(CFLAGS) | sed s/-msoft-float//)
+CFLAGS += -mhard-float -fkeep-inline-functions
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/acc1.c b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/acc1.c
new file mode 100644
index 000000000..9fca9b378
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/acc1.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+static double func (const double *array)
+{
+	double d = *array;
+
+	if (d == 0.0)
+		return d;
+	else
+		return d + func (array + 1);
+}
+
+int fpu_post_test_math5 (void)
+{
+	double values[] = { 0.1e-100, 1.0, -1.0, 0.0 };
+
+	if (func (values) != 0.1e-100) {
+		post_log ("Error in FPU math5 test\n");
+		return -1;
+	}
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/compare-fp-1.c b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/compare-fp-1.c
new file mode 100644
index 000000000..f836b29c0
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/compare-fp-1.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * Test for correctness of composite floating-point comparisons.
+ * Written by Paolo Bonzini, 26th May 2004.
+ * This file is originally a part of the GCC testsuite.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+static int failed;
+
+#define TEST(c) if ((c) != ok) failed++
+#define ORD(a, b) (!__builtin_isunordered ((a), (b)))
+#define UNORD(a, b) (__builtin_isunordered ((a), (b)))
+#define UNEQ(a, b) (__builtin_isunordered ((a), (b)) || ((a) == (b)))
+#define UNLT(a, b) (__builtin_isunordered ((a), (b)) || ((a) < (b)))
+#define UNLE(a, b) (__builtin_isunordered ((a), (b)) || ((a) <= (b)))
+#define UNGT(a, b) (__builtin_isunordered ((a), (b)) || ((a) > (b)))
+#define UNGE(a, b) (__builtin_isunordered ((a), (b)) || ((a) >= (b)))
+#define LTGT(a, b) (__builtin_islessgreater ((a), (b)))
+
+static float pinf;
+static float ninf;
+static float NaN;
+
+static void iuneq (float x, float y, int ok)
+{
+	TEST (UNEQ (x, y));
+	TEST (!LTGT (x, y));
+	TEST (UNLE (x, y) && UNGE (x,y));
+}
+
+static void ieq (float x, float y, int ok)
+{
+	TEST (ORD (x, y) && UNEQ (x, y));
+}
+
+static void iltgt (float x, float y, int ok)
+{
+	TEST (!UNEQ (x, y)); /* Not optimizable. */
+	TEST (LTGT (x, y)); /* Same, __builtin_islessgreater does not trap. */
+	TEST (ORD (x, y) && (UNLT (x, y) || UNGT (x,y)));
+}
+
+static void ine (float x, float y, int ok)
+{
+	TEST (UNLT (x, y) || UNGT (x, y));
+}
+
+static void iunlt (float x, float y, int ok)
+{
+	TEST (UNLT (x, y));
+	TEST (UNORD (x, y) || (x < y));
+}
+
+static void ilt (float x, float y, int ok)
+{
+	TEST (ORD (x, y) && UNLT (x, y)); /* Not optimized */
+	TEST ((x <= y) && (x != y));
+	TEST ((x <= y) && (y != x));
+	TEST ((x != y) && (x <= y)); /* Not optimized */
+	TEST ((y != x) && (x <= y)); /* Not optimized */
+}
+
+static void iunle (float x, float y, int ok)
+{
+	TEST (UNLE (x, y));
+	TEST (UNORD (x, y) || (x <= y));
+}
+
+static void ile (float x, float y, int ok)
+{
+	TEST (ORD (x, y) && UNLE (x, y)); /* Not optimized */
+	TEST ((x < y) || (x == y));
+	TEST ((y > x) || (x == y));
+	TEST ((x == y) || (x < y)); /* Not optimized */
+	TEST ((y == x) || (x < y)); /* Not optimized */
+}
+
+static void iungt (float x, float y, int ok)
+{
+	TEST (UNGT (x, y));
+	TEST (UNORD (x, y) || (x > y));
+}
+
+static void igt (float x, float y, int ok)
+{
+	TEST (ORD (x, y) && UNGT (x, y)); /* Not optimized */
+	TEST ((x >= y) && (x != y));
+	TEST ((x >= y) && (y != x));
+	TEST ((x != y) && (x >= y)); /* Not optimized */
+	TEST ((y != x) && (x >= y)); /* Not optimized */
+}
+
+static void iunge (float x, float y, int ok)
+{
+	TEST (UNGE (x, y));
+	TEST (UNORD (x, y) || (x >= y));
+}
+
+static void ige (float x, float y, int ok)
+{
+	TEST (ORD (x, y) && UNGE (x, y)); /* Not optimized */
+	TEST ((x > y) || (x == y));
+	TEST ((y < x) || (x == y));
+	TEST ((x == y) || (x > y)); /* Not optimized */
+	TEST ((y == x) || (x > y)); /* Not optimized */
+}
+
+int fpu_post_test_math6 (void)
+{
+	pinf = __builtin_inf ();
+	ninf = -__builtin_inf ();
+	NaN = __builtin_nan ("");
+
+	iuneq (ninf, pinf, 0);
+	iuneq (NaN, NaN, 1);
+	iuneq (pinf, ninf, 0);
+	iuneq (1, 4, 0);
+	iuneq (3, 3, 1);
+	iuneq (5, 2, 0);
+
+	ieq (1, 4, 0);
+	ieq (3, 3, 1);
+	ieq (5, 2, 0);
+
+	iltgt (ninf, pinf, 1);
+	iltgt (NaN, NaN, 0);
+	iltgt (pinf, ninf, 1);
+	iltgt (1, 4, 1);
+	iltgt (3, 3, 0);
+	iltgt (5, 2, 1);
+
+	ine (1, 4, 1);
+	ine (3, 3, 0);
+	ine (5, 2, 1);
+
+	iunlt (NaN, ninf, 1);
+	iunlt (pinf, NaN, 1);
+	iunlt (pinf, ninf, 0);
+	iunlt (pinf, pinf, 0);
+	iunlt (ninf, ninf, 0);
+	iunlt (1, 4, 1);
+	iunlt (3, 3, 0);
+	iunlt (5, 2, 0);
+
+	ilt (1, 4, 1);
+	ilt (3, 3, 0);
+	ilt (5, 2, 0);
+
+	iunle (NaN, ninf, 1);
+	iunle (pinf, NaN, 1);
+	iunle (pinf, ninf, 0);
+	iunle (pinf, pinf, 1);
+	iunle (ninf, ninf, 1);
+	iunle (1, 4, 1);
+	iunle (3, 3, 1);
+	iunle (5, 2, 0);
+
+	ile (1, 4, 1);
+	ile (3, 3, 1);
+	ile (5, 2, 0);
+
+	iungt (NaN, ninf, 1);
+	iungt (pinf, NaN, 1);
+	iungt (pinf, ninf, 1);
+	iungt (pinf, pinf, 0);
+	iungt (ninf, ninf, 0);
+	iungt (1, 4, 0);
+	iungt (3, 3, 0);
+	iungt (5, 2, 1);
+
+	igt (1, 4, 0);
+	igt (3, 3, 0);
+	igt (5, 2, 1);
+
+	iunge (NaN, ninf, 1);
+	iunge (pinf, NaN, 1);
+	iunge (ninf, pinf, 0);
+	iunge (pinf, pinf, 1);
+	iunge (ninf, ninf, 1);
+	iunge (1, 4, 0);
+	iunge (3, 3, 1);
+	iunge (5, 2, 1);
+
+	ige (1, 4, 0);
+	ige (3, 3, 1);
+	ige (5, 2, 1);
+
+	if (failed) {
+		post_log ("Error in FPU math6 test\n");
+		return -1;
+	}
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/fpu.c b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/fpu.c
new file mode 100644
index 000000000..3f3adea19
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/fpu.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Author: Sergei Poselenov <sposelenov@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * FPU test
+ *
+ * This test checks the arithmetic logic unit (ALU) of CPU.
+ * It tests independently various groups of instructions using
+ * run-time modification of the code to reduce the memory footprint.
+ * For more details refer to post/cpu/ *.c files.
+ */
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+#include <watchdog.h>
+
+GNU_FPOST_ATTR
+
+extern int fpu_status (void);
+extern void fpu_enable (void);
+extern void fpu_disable (void);
+
+extern int fpu_post_test_math1 (void);
+extern int fpu_post_test_math2 (void);
+extern int fpu_post_test_math3 (void);
+extern int fpu_post_test_math4 (void);
+extern int fpu_post_test_math5 (void);
+extern int fpu_post_test_math6 (void);
+extern int fpu_post_test_math7 (void);
+
+int fpu_post_test (int flags)
+{
+	int fpu = fpu_status ();
+
+	int ret = 0;
+
+	WATCHDOG_RESET ();
+
+	if (!fpu)
+		fpu_enable ();
+
+	if (ret == 0)
+		ret = fpu_post_test_math1 ();
+	if (ret == 0)
+		ret = fpu_post_test_math2 ();
+	if (ret == 0)
+		ret = fpu_post_test_math3 ();
+	if (ret == 0)
+		ret = fpu_post_test_math4 ();
+	if (ret == 0)
+		ret = fpu_post_test_math5 ();
+	if (ret == 0)
+		ret = fpu_post_test_math6 ();
+	if (ret == 0)
+		ret = fpu_post_test_math7 ();
+
+	if (!fpu)
+		fpu_disable ();
+
+	WATCHDOG_RESET ();
+
+	return ret;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/fpu/mul-subnormal-single-1.c b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/mul-subnormal-single-1.c
new file mode 100644
index 000000000..1f3732d92
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/fpu/mul-subnormal-single-1.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * This file is originally a part of the GCC testsuite.
+ * Check that certain subnormal numbers (formerly known as denormalized
+ * numbers) are rounded to within 0.5 ulp.  PR other/14354.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+
+GNU_FPOST_ATTR
+
+union uf
+{
+	unsigned int u;
+	float f;
+};
+
+static float
+u2f (unsigned int v)
+{
+	union uf u;
+	u.u = v;
+	return u.f;
+}
+
+static unsigned int
+f2u (float v)
+{
+	union uf u;
+	u.f = v;
+	return u.u;
+}
+
+static int ok = 1;
+
+static void
+tstmul (unsigned int ux, unsigned int uy, unsigned int ur)
+{
+	float x = u2f (ux);
+	float y = u2f (uy);
+
+	if (f2u (x * y) != ur)
+	/* Set a variable rather than aborting here, to simplify tracing when
+	   several computations are wrong.  */
+		ok = 0;
+}
+
+/* We don't want to make this const and static, or else we risk inlining
+   causing the test to fold as constants at compile-time.  */
+struct
+{
+  unsigned int p1, p2, res;
+} static volatile expected[] =
+{
+	{0xfff, 0x3f800400, 0xfff},
+	{0xf, 0x3fc88888, 0x17},
+	{0xf, 0x3f844444, 0xf}
+};
+
+int fpu_post_test_math7 (void)
+{
+	unsigned int i;
+
+	for (i = 0; i < sizeof (expected) / sizeof (expected[0]); i++)
+	{
+		tstmul (expected[i].p1, expected[i].p2, expected[i].res);
+		tstmul (expected[i].p2, expected[i].p1, expected[i].res);
+	}
+
+	if (!ok) {
+		post_log ("Error in FPU math7 test\n");
+		return -1;
+	}
+	return 0;
+}
+
+#endif /* CONFIG_POST & CONFIG_SYS_POST_FPU */
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/load.c b/roms/u-boot-sam460ex/post/lib_powerpc/load.c
new file mode 100644
index 000000000..98d437318
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/load.c
@@ -0,0 +1,256 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load instructions:		lbz(x)(u), lhz(x)(u), lha(x)(u), lwz(x)(u)
+ *
+ * All operations are performed on a 16-byte array. The array
+ * is 4-byte aligned. The base register points to offset 8.
+ * The immediate offset (index register) ranges in [-8 ... +7].
+ * The test cases are composed so that they do not
+ * cause alignment exceptions.
+ * The test contains a pre-built table describing all test cases.
+ * The table entry contains:
+ * the instruction opcode, the array contents, the value of the index
+ * register and the expected value of the destination register.
+ * After executing the instruction, the test verifies the
+ * value of the destination register and the value of the base
+ * register (it must change for "load with update" instructions).
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22w (ulong *code, ulong *op1, ulong op2, ulong *op3);
+extern void cpu_post_exec_21w (ulong *code, ulong *op1, ulong *op2);
+
+static struct cpu_post_load_s
+{
+    ulong cmd;
+    uint width;
+    int update;
+    int index;
+    ulong offset;
+} cpu_post_load_table[] =
+{
+    {
+	OP_LWZ,
+	4,
+	0,
+	0,
+	4
+    },
+    {
+	OP_LHA,
+	3,
+	0,
+	0,
+	2
+    },
+    {
+	OP_LHZ,
+	2,
+	0,
+	0,
+	2
+    },
+    {
+	OP_LBZ,
+	1,
+	0,
+	0,
+	1
+    },
+    {
+	OP_LWZU,
+	4,
+	1,
+	0,
+	4
+    },
+    {
+	OP_LHAU,
+	3,
+	1,
+	0,
+	2
+    },
+    {
+	OP_LHZU,
+	2,
+	1,
+	0,
+	2
+    },
+    {
+	OP_LBZU,
+	1,
+	1,
+	0,
+	1
+    },
+    {
+	OP_LWZX,
+	4,
+	0,
+	1,
+	4
+    },
+    {
+	OP_LHAX,
+	3,
+	0,
+	1,
+	2
+    },
+    {
+	OP_LHZX,
+	2,
+	0,
+	1,
+	2
+    },
+    {
+	OP_LBZX,
+	1,
+	0,
+	1,
+	1
+    },
+    {
+	OP_LWZUX,
+	4,
+	1,
+	1,
+	4
+    },
+    {
+	OP_LHAUX,
+	3,
+	1,
+	1,
+	2
+    },
+    {
+	OP_LHZUX,
+	2,
+	1,
+	1,
+	2
+    },
+    {
+	OP_LBZUX,
+	1,
+	1,
+	1,
+	1
+    },
+};
+static unsigned int cpu_post_load_size =
+    sizeof (cpu_post_load_table) / sizeof (struct cpu_post_load_s);
+
+int cpu_post_test_load (void)
+{
+    int ret = 0;
+    unsigned int i;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_load_size && ret == 0; i++)
+    {
+	struct cpu_post_load_s *test = cpu_post_load_table + i;
+	uchar data[16] =
+	{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
+	ulong base0 = (ulong) (data + 8);
+	ulong base = base0;
+	ulong value;
+
+	if (test->index)
+	{
+	    ulong code[] =
+	    {
+		ASM_12(test->cmd, 5, 3, 4),
+		ASM_BLR,
+	    };
+
+	    cpu_post_exec_22w (code, &base, test->offset, &value);
+	}
+	else
+	{
+	    ulong code[] =
+	    {
+		ASM_11I(test->cmd, 4, 3, test->offset),
+		ASM_BLR,
+	    };
+
+	    cpu_post_exec_21w (code, &base, &value);
+	}
+
+	if (ret == 0)
+	{
+	   if (test->update)
+	       ret = base == base0 + test->offset ? 0 : -1;
+	   else
+	       ret = base == base0 ? 0 : -1;
+	}
+
+	if (ret == 0)
+	{
+	    switch (test->width)
+	    {
+	    case 1:
+		ret = *(uchar *)(base0 + test->offset) == value ?
+		      0 : -1;
+		break;
+	    case 2:
+		ret = *(ushort *)(base0 + test->offset) == value ?
+		      0 : -1;
+		break;
+	    case 3:
+		ret = *(short *)(base0 + test->offset) == value ?
+		      0 : -1;
+		break;
+	    case 4:
+		ret = *(ulong *)(base0 + test->offset) == value ?
+		      0 : -1;
+		break;
+	    }
+	}
+
+	if (ret != 0)
+	{
+	    post_log ("Error at load test %d !\n", i);
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/multi.c b/roms/u-boot-sam460ex/post/lib_powerpc/multi.c
new file mode 100644
index 000000000..e42a7c07e
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/multi.c
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load/store multiple word instructions:	lmw, stmw
+ *
+ * 26 consecutive words are loaded from a source memory buffer
+ * into GPRs r6 through r31. After that, 26 consecutive words are stored
+ * from the GPRs r6 through r31 into a target memory buffer. The contents
+ * of the source and target buffers are then compared.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
+
+int cpu_post_test_multi (void)
+{
+    int ret = 0;
+    unsigned int i;
+    int flag = disable_interrupts();
+
+    if (ret == 0)
+    {
+	ulong src [26], dst [26];
+
+	ulong code[] =
+	{
+	    ASM_LMW(5, 3, 0),
+	    ASM_STMW(5, 4, 0),
+	    ASM_BLR,
+	};
+
+	for (i = 0; i < sizeof(src) / sizeof(src[0]); i ++)
+	{
+	    src[i] = i;
+	    dst[i] = 0;
+	}
+
+	cpu_post_exec_02(code, (ulong)src, (ulong)dst);
+
+	ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+    }
+
+    if (ret != 0)
+    {
+	post_log ("Error at multi test !\n");
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/rlwimi.c b/roms/u-boot-sam460ex/post/lib_powerpc/rlwimi.c
new file mode 100644
index 000000000..fd628b31f
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/rlwimi.c
@@ -0,0 +1,159 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions:		rlwimi
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+    ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwimi_s
+{
+    ulong cmd;
+    ulong op0;
+    ulong op1;
+    uchar op2;
+    uchar mb;
+    uchar me;
+    ulong res;
+} cpu_post_rlwimi_table[] =
+{
+    {
+	OP_RLWIMI,
+	0xff00ffff,
+	0x0000aa00,
+	8,
+	8,
+	15,
+	0xffaaffff
+    },
+};
+static unsigned int cpu_post_rlwimi_size =
+    sizeof (cpu_post_rlwimi_table) / sizeof (struct cpu_post_rlwimi_s);
+
+int cpu_post_test_rlwimi (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_rlwimi_size && ret == 0; i++)
+    {
+	struct cpu_post_rlwimi_s *test = cpu_post_rlwimi_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -20),
+		ASM_STW(3, stk, 8),
+		ASM_STW(4, stk, 12),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg1, stk, 8),
+		ASM_LWZ(reg0, stk, 12),
+		ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me),
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 20),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -20),
+		ASM_STW(3, stk, 8),
+		ASM_STW(4, stk, 12),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg1, stk, 8),
+		ASM_LWZ(reg0, stk, 12),
+		ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me) |
+		    BIT_C,
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 20),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    if (ret == 0)
+	    {
+		cr = 0;
+		cpu_post_exec_22 (code, & cr, & res, test->op0, test->op1);
+
+		ret = res == test->res && cr == 0 ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at rlwimi test %d !\n", i);
+		}
+	    }
+
+	    if (ret == 0)
+	    {
+		cpu_post_exec_22 (codecr, & cr, & res, test->op0, test->op1);
+
+		ret = res == test->res &&
+		      (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at rlwimi test %d !\n", i);
+	        }
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/rlwinm.c b/roms/u-boot-sam460ex/post/lib_powerpc/rlwinm.c
new file mode 100644
index 000000000..88a28c643
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/rlwinm.c
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions:		rlwinm
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwinm_s
+{
+    ulong cmd;
+    ulong op1;
+    uchar op2;
+    uchar mb;
+    uchar me;
+    ulong res;
+} cpu_post_rlwinm_table[] =
+{
+   {
+	OP_RLWINM,
+	0xffff0000,
+	24,
+	16,
+	23,
+	0x0000ff00
+   },
+};
+static unsigned int cpu_post_rlwinm_size =
+    sizeof (cpu_post_rlwinm_table) / sizeof (struct cpu_post_rlwinm_s);
+
+int cpu_post_test_rlwinm (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_rlwinm_size && ret == 0; i++)
+    {
+	struct cpu_post_rlwinm_s *test = cpu_post_rlwinm_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_113(test->cmd, reg1, reg0, test->op2, test->mb, test->me),
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_113(test->cmd, reg1, reg0, test->op2, test->mb,
+		    test->me) | BIT_C,
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    if (ret == 0)
+	    {
+		cr = 0;
+		cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+		ret = res == test->res && cr == 0 ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at rlwinm test %d !\n", i);
+		}
+	    }
+
+	    if (ret == 0)
+	    {
+		cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+		ret = res == test->res &&
+		      (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at rlwinm test %d !\n", i);
+	        }
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/rlwnm.c b/roms/u-boot-sam460ex/post/lib_powerpc/rlwnm.c
new file mode 100644
index 000000000..60bcb6d26
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/rlwnm.c
@@ -0,0 +1,162 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions:		rlwnm
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+    ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_rlwnm_s
+{
+    ulong cmd;
+    ulong op1;
+    ulong op2;
+    uchar mb;
+    uchar me;
+    ulong res;
+} cpu_post_rlwnm_table[] =
+{
+   {
+	OP_RLWNM,
+	0xffff0000,
+	24,
+	16,
+	23,
+	0x0000ff00
+   },
+};
+static unsigned int cpu_post_rlwnm_size =
+    sizeof (cpu_post_rlwnm_table) / sizeof (struct cpu_post_rlwnm_s);
+
+int cpu_post_test_rlwnm (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_rlwnm_size && ret == 0; i++)
+    {
+	struct cpu_post_rlwnm_s *test = cpu_post_rlwnm_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int reg2 = (reg + 2) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -24),
+		ASM_STW(3, stk, 12),
+		ASM_STW(4, stk, 16),
+		ASM_STW(reg0, stk, 8),
+		ASM_STW(reg1, stk, 4),
+		ASM_STW(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 12),
+		ASM_LWZ(reg0, stk, 16),
+		ASM_122(test->cmd, reg2, reg1, reg0, test->mb, test->me),
+		ASM_STW(reg2, stk, 12),
+		ASM_LWZ(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 4),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_LWZ(3, stk, 12),
+		ASM_ADDI(1, stk, 24),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -24),
+		ASM_STW(3, stk, 12),
+		ASM_STW(4, stk, 16),
+		ASM_STW(reg0, stk, 8),
+		ASM_STW(reg1, stk, 4),
+		ASM_STW(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 12),
+		ASM_LWZ(reg0, stk, 16),
+		ASM_122(test->cmd, reg2, reg1, reg0, test->mb, test->me) |
+		    BIT_C,
+		ASM_STW(reg2, stk, 12),
+		ASM_LWZ(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 4),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_LWZ(3, stk, 12),
+		ASM_ADDI(1, stk, 24),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    if (ret == 0)
+	    {
+		cr = 0;
+		cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+		ret = res == test->res && cr == 0 ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at rlwnm test %d !\n", i);
+		}
+	    }
+
+	    if (ret == 0)
+	    {
+		cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+		ret = res == test->res &&
+		      (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at rlwnm test %d !\n", i);
+	        }
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/srawi.c b/roms/u-boot-sam460ex/post/lib_powerpc/srawi.c
new file mode 100644
index 000000000..be153aded
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/srawi.c
@@ -0,0 +1,153 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Shift instructions:		srawi
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_srawi_s
+{
+    ulong cmd;
+    ulong op1;
+    uchar op2;
+    ulong res;
+} cpu_post_srawi_table[] =
+{
+    {
+	OP_SRAWI,
+	0x8000,
+	3,
+	0x1000
+    },
+    {
+	OP_SRAWI,
+	0x80000000,
+	3,
+	0xf0000000
+    },
+};
+static unsigned int cpu_post_srawi_size =
+    sizeof (cpu_post_srawi_table) / sizeof (struct cpu_post_srawi_s);
+
+int cpu_post_test_srawi (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_srawi_size && ret == 0; i++)
+    {
+	struct cpu_post_srawi_s *test = cpu_post_srawi_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_11S(test->cmd, reg1, reg0, test->op2),
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_11S(test->cmd, reg1, reg0, test->op2) | BIT_C,
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    if (ret == 0)
+	    {
+		cr = 0;
+		cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+		ret = res == test->res && cr == 0 ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at srawi test %d !\n", i);
+		}
+	    }
+
+	    if (ret == 0)
+	    {
+		cpu_post_exec_21 (codecr, & cr, & res, test->op1);
+
+		ret = res == test->res &&
+		      (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at srawi test %d !\n", i);
+	        }
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/store.c b/roms/u-boot-sam460ex/post/lib_powerpc/store.c
new file mode 100644
index 000000000..1956f6baa
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/store.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Store instructions:		stb(x)(u), sth(x)(u), stw(x)(u)
+ *
+ * All operations are performed on a 16-byte array. The array
+ * is 4-byte aligned. The base register points to offset 8.
+ * The immediate offset (index register) ranges in [-8 ... +7].
+ * The test cases are composed so that they do not
+ * cause alignment exceptions.
+ * The test contains a pre-built table describing all test cases.
+ * The table entry contains:
+ * the instruction opcode, the value of the index register and
+ * the value of the source register. After executing the
+ * instruction, the test verifies the contents of the array
+ * and the value of the base register (it must change for "store
+ * with update" instructions).
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_12w (ulong *code, ulong *op1, ulong op2, ulong op3);
+extern void cpu_post_exec_11w (ulong *code, ulong *op1, ulong op2);
+
+static struct cpu_post_store_s
+{
+    ulong cmd;
+    uint width;
+    int update;
+    int index;
+    ulong offset;
+    ulong value;
+} cpu_post_store_table[] =
+{
+    {
+	OP_STW,
+	4,
+	0,
+	0,
+	-4,
+	0xff00ff00
+    },
+    {
+	OP_STH,
+	2,
+	0,
+	0,
+	-2,
+	0xff00
+    },
+    {
+	OP_STB,
+	1,
+	0,
+	0,
+	-1,
+	0xff
+    },
+    {
+	OP_STWU,
+	4,
+	1,
+	0,
+	-4,
+	0xff00ff00
+    },
+    {
+	OP_STHU,
+	2,
+	1,
+	0,
+	-2,
+	0xff00
+    },
+    {
+	OP_STBU,
+	1,
+	1,
+	0,
+	-1,
+	0xff
+    },
+    {
+	OP_STWX,
+	4,
+	0,
+	1,
+	-4,
+	0xff00ff00
+    },
+    {
+	OP_STHX,
+	2,
+	0,
+	1,
+	-2,
+	0xff00
+    },
+    {
+	OP_STBX,
+	1,
+	0,
+	1,
+	-1,
+	0xff
+    },
+    {
+	OP_STWUX,
+	4,
+	1,
+	1,
+	-4,
+	0xff00ff00
+    },
+    {
+	OP_STHUX,
+	2,
+	1,
+	1,
+	-2,
+	0xff00
+    },
+    {
+	OP_STBUX,
+	1,
+	1,
+	1,
+	-1,
+	0xff
+    },
+};
+static unsigned int cpu_post_store_size =
+    sizeof (cpu_post_store_table) / sizeof (struct cpu_post_store_s);
+
+int cpu_post_test_store (void)
+{
+    int ret = 0;
+    unsigned int i;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_store_size && ret == 0; i++)
+    {
+	struct cpu_post_store_s *test = cpu_post_store_table + i;
+	uchar data[16] =
+	{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 };
+	ulong base0 = (ulong) (data + 8);
+	ulong base = base0;
+
+	if (test->index)
+	{
+	    ulong code[] =
+	    {
+		ASM_12(test->cmd, 5, 3, 4),
+		ASM_BLR,
+	    };
+
+	    cpu_post_exec_12w (code, &base, test->offset, test->value);
+	}
+	else
+	{
+	    ulong code[] =
+	    {
+		ASM_11I(test->cmd, 4, 3, test->offset),
+		ASM_BLR,
+	    };
+
+	    cpu_post_exec_11w (code, &base, test->value);
+	}
+
+	if (ret == 0)
+	{
+	   if (test->update)
+	       ret = base == base0 + test->offset ? 0 : -1;
+	   else
+	       ret = base == base0 ? 0 : -1;
+	}
+
+	if (ret == 0)
+	{
+	    switch (test->width)
+	    {
+	    case 1:
+		ret = *(uchar *)(base0 + test->offset) == test->value ?
+		      0 : -1;
+		break;
+	    case 2:
+		ret = *(ushort *)(base0 + test->offset) == test->value ?
+		      0 : -1;
+		break;
+	    case 4:
+		ret = *(ulong *)(base0 + test->offset) == test->value ?
+		      0 : -1;
+		break;
+	    }
+	}
+
+	if (ret != 0)
+	{
+	    post_log ("Error at store test %d !\n", i);
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/string.c b/roms/u-boot-sam460ex/post/lib_powerpc/string.c
new file mode 100644
index 000000000..c0ddeaf65
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/string.c
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Load/store string instructions:	lswi, stswi, lswx, stswx
+ *
+ * Several consecutive bytes from a source memory buffer are loaded
+ * left to right into GPRs. After that, the bytes are stored
+ * from the GPRs into a target memory buffer. The contents
+ * of the source and target buffers are then compared.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_02 (ulong *code, ulong op1, ulong op2);
+extern void cpu_post_exec_04 (ulong *code, ulong op1, ulong op2, ulong op3,
+    ulong op4);
+
+#include <bedbug/regs.h>
+int cpu_post_test_string (void)
+{
+    int ret = 0;
+    unsigned int i;
+    int flag = disable_interrupts();
+
+    if (ret == 0)
+    {
+	char src [31], dst [31];
+
+	ulong code[] =
+	{
+	    ASM_LSWI(5, 3, 31),
+	    ASM_STSWI(5, 4, 31),
+	    ASM_BLR,
+	};
+
+	for (i = 0; i < sizeof(src); i ++)
+	{
+	    src[i] = (char) i;
+	    dst[i] = 0;
+	}
+
+	cpu_post_exec_02(code, (ulong)src, (ulong)dst);
+
+	ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+    }
+
+    if (ret == 0)
+    {
+	char src [95], dst [95];
+
+	ulong code[] =
+	{
+	    ASM_LSWX(8, 3, 5),
+	    ASM_STSWX(8, 4, 5),
+	    ASM_BLR,
+	};
+
+	for (i = 0; i < sizeof(src); i ++)
+	{
+	    src[i] = (char) i;
+	    dst[i] = 0;
+	}
+
+	cpu_post_exec_04(code, (ulong)src, (ulong)dst, 0, sizeof(src));
+
+	ret = memcmp(src, dst, sizeof(dst)) == 0 ? 0 : -1;
+    }
+
+    if (ret != 0)
+    {
+	post_log ("Error at string test !\n");
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/three.c b/roms/u-boot-sam460ex/post/lib_powerpc/three.c
new file mode 100644
index 000000000..7f8c1e2b8
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/three.c
@@ -0,0 +1,256 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions		instr rD,rA,rB
+ *
+ * Arithmetic instructions:	add, addc, adde, subf, subfc, subfe,
+ *				mullw, mulhw, mulhwu, divw, divwu
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+    ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_three_s
+{
+    ulong cmd;
+    ulong op1;
+    ulong op2;
+    ulong res;
+} cpu_post_three_table[] =
+{
+    {
+	OP_ADD,
+	100,
+	200,
+	300
+    },
+    {
+	OP_ADD,
+	100,
+	-200,
+	-100
+    },
+    {
+	OP_ADDC,
+	100,
+	200,
+	300
+    },
+    {
+	OP_ADDC,
+	100,
+	-200,
+	-100
+    },
+    {
+	OP_ADDE,
+	100,
+	200,
+	300
+    },
+    {
+	OP_ADDE,
+	100,
+	-200,
+	-100
+    },
+    {
+	OP_SUBF,
+	100,
+	200,
+	100
+    },
+    {
+	OP_SUBF,
+	300,
+	200,
+	-100
+    },
+    {
+	OP_SUBFC,
+	100,
+	200,
+	100
+    },
+    {
+	OP_SUBFC,
+	300,
+	200,
+	-100
+    },
+    {
+	OP_SUBFE,
+	100,
+	200,
+	200 + ~100
+    },
+    {
+	OP_SUBFE,
+	300,
+	200,
+	200 + ~300
+    },
+    {
+	OP_MULLW,
+	200,
+	300,
+	200 * 300
+    },
+    {
+	OP_MULHW,
+	0x10000000,
+	0x10000000,
+	0x1000000
+    },
+    {
+	OP_MULHWU,
+	0x80000000,
+	0x80000000,
+	0x40000000
+    },
+    {
+	OP_DIVW,
+	-20,
+	5,
+	-4
+    },
+    {
+	OP_DIVWU,
+	0x8000,
+	0x200,
+	0x40
+    },
+};
+static unsigned int cpu_post_three_size =
+    sizeof (cpu_post_three_table) / sizeof (struct cpu_post_three_s);
+
+int cpu_post_test_three (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_three_size && ret == 0; i++)
+    {
+	struct cpu_post_three_s *test = cpu_post_three_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int reg2 = (reg + 2) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -24),
+		ASM_STW(3, stk, 12),
+		ASM_STW(4, stk, 16),
+		ASM_STW(reg0, stk, 8),
+		ASM_STW(reg1, stk, 4),
+		ASM_STW(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 12),
+		ASM_LWZ(reg0, stk, 16),
+		ASM_12(test->cmd, reg2, reg1, reg0),
+		ASM_STW(reg2, stk, 12),
+		ASM_LWZ(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 4),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_LWZ(3, stk, 12),
+		ASM_ADDI(1, stk, 24),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -24),
+		ASM_STW(3, stk, 12),
+		ASM_STW(4, stk, 16),
+		ASM_STW(reg0, stk, 8),
+		ASM_STW(reg1, stk, 4),
+		ASM_STW(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 12),
+		ASM_LWZ(reg0, stk, 16),
+		ASM_12(test->cmd, reg2, reg1, reg0) | BIT_C,
+		ASM_STW(reg2, stk, 12),
+		ASM_LWZ(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 4),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_LWZ(3, stk, 12),
+		ASM_ADDI(1, stk, 24),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    if (ret == 0)
+	    {
+		cr = 0;
+		cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+		ret = res == test->res && cr == 0 ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at three test %d !\n", i);
+		}
+	    }
+
+	    if (ret == 0)
+	    {
+		cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+		ret = res == test->res &&
+		      (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at three test %d !\n", i);
+	        }
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/threei.c b/roms/u-boot-sam460ex/post/lib_powerpc/threei.c
new file mode 100644
index 000000000..31953f935
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/threei.c
@@ -0,0 +1,134 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions		instr rA,rS,UIMM
+ *
+ * Logic instructions:		ori, oris, xori, xoris
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_threei_s
+{
+    ulong cmd;
+    ulong op1;
+    ushort op2;
+    ulong res;
+} cpu_post_threei_table[] =
+{
+    {
+	OP_ORI,
+	0x80000000,
+	0xffff,
+	0x8000ffff
+    },
+    {
+	OP_ORIS,
+	0x00008000,
+	0xffff,
+	0xffff8000
+    },
+    {
+	OP_XORI,
+	0x8000ffff,
+	0xffff,
+	0x80000000
+    },
+    {
+	OP_XORIS,
+	0x00008000,
+	0xffff,
+	0xffff8000
+    },
+};
+static unsigned int cpu_post_threei_size =
+    sizeof (cpu_post_threei_table) / sizeof (struct cpu_post_threei_s);
+
+int cpu_post_test_threei (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_threei_size && ret == 0; i++)
+    {
+	struct cpu_post_threei_s *test = cpu_post_threei_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_11IX(test->cmd, reg1, reg0, test->op2),
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    cr = 0;
+	    cpu_post_exec_21 (code, & cr, & res, test->op1);
+
+	    ret = res == test->res && cr == 0 ? 0 : -1;
+
+	    if (ret != 0)
+	    {
+	        post_log ("Error at threei test %d !\n", i);
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/threex.c b/roms/u-boot-sam460ex/post/lib_powerpc/threex.c
new file mode 100644
index 000000000..350a12ae7
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/threex.c
@@ -0,0 +1,226 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Ternary instructions		instr rA,rS,rB
+ *
+ * Logic instructions:		or, orc, xor, nand, nor, eqv
+ * Shift instructions:		slw, srw, sraw
+ *
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_22 (ulong *code, ulong *cr, ulong *res, ulong op1,
+    ulong op2);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_threex_s
+{
+    ulong cmd;
+    ulong op1;
+    ulong op2;
+    ulong res;
+} cpu_post_threex_table[] =
+{
+    {
+	OP_OR,
+	0x1234,
+	0x5678,
+	0x1234 | 0x5678
+    },
+    {
+	OP_ORC,
+	0x1234,
+	0x5678,
+	0x1234 | ~0x5678
+    },
+    {
+	OP_XOR,
+	0x1234,
+	0x5678,
+	0x1234 ^ 0x5678
+    },
+    {
+	OP_NAND,
+	0x1234,
+	0x5678,
+	~(0x1234 & 0x5678)
+    },
+    {
+	OP_NOR,
+	0x1234,
+	0x5678,
+	~(0x1234 | 0x5678)
+    },
+    {
+	OP_EQV,
+	0x1234,
+	0x5678,
+	~(0x1234 ^ 0x5678)
+    },
+    {
+	OP_SLW,
+	0x80,
+	16,
+	0x800000
+    },
+    {
+	OP_SLW,
+	0x80,
+	32,
+	0
+    },
+    {
+	OP_SRW,
+	0x800000,
+	16,
+	0x80
+    },
+    {
+	OP_SRW,
+	0x800000,
+	32,
+	0
+    },
+    {
+	OP_SRAW,
+	0x80000000,
+	3,
+	0xf0000000
+    },
+    {
+	OP_SRAW,
+	0x8000,
+	3,
+	0x1000
+    },
+};
+static unsigned int cpu_post_threex_size =
+    sizeof (cpu_post_threex_table) / sizeof (struct cpu_post_threex_s);
+
+int cpu_post_test_threex (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_threex_size && ret == 0; i++)
+    {
+	struct cpu_post_threex_s *test = cpu_post_threex_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int reg2 = (reg + 2) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -24),
+		ASM_STW(3, stk, 12),
+		ASM_STW(4, stk, 16),
+		ASM_STW(reg0, stk, 8),
+		ASM_STW(reg1, stk, 4),
+		ASM_STW(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 12),
+		ASM_LWZ(reg0, stk, 16),
+		ASM_12X(test->cmd, reg2, reg1, reg0),
+		ASM_STW(reg2, stk, 12),
+		ASM_LWZ(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 4),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_LWZ(3, stk, 12),
+		ASM_ADDI(1, stk, 24),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -24),
+		ASM_STW(3, stk, 12),
+		ASM_STW(4, stk, 16),
+		ASM_STW(reg0, stk, 8),
+		ASM_STW(reg1, stk, 4),
+		ASM_STW(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 12),
+		ASM_LWZ(reg0, stk, 16),
+		ASM_12X(test->cmd, reg2, reg1, reg0) | BIT_C,
+		ASM_STW(reg2, stk, 12),
+		ASM_LWZ(reg2, stk, 0),
+		ASM_LWZ(reg1, stk, 4),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_LWZ(3, stk, 12),
+		ASM_ADDI(1, stk, 24),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    if (ret == 0)
+	    {
+		cr = 0;
+		cpu_post_exec_22 (code, & cr, & res, test->op1, test->op2);
+
+		ret = res == test->res && cr == 0 ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at threex test %d !\n", i);
+		}
+	    }
+
+	    if (ret == 0)
+	    {
+		cpu_post_exec_22 (codecr, & cr, & res, test->op1, test->op2);
+
+		ret = res == test->res &&
+		      (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at threex test %d !\n", i);
+	        }
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/two.c b/roms/u-boot-sam460ex/post/lib_powerpc/two.c
new file mode 100644
index 000000000..2b111472b
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/two.c
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Binary instructions		instr rD,rA
+ *
+ * Logic instructions:		neg
+ * Arithmetic instructions:	addme, addze, subfme, subfze
+
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_two_s
+{
+    ulong cmd;
+    ulong op;
+    ulong res;
+} cpu_post_two_table[] =
+{
+    {
+	OP_NEG,
+	3,
+	-3
+    },
+    {
+	OP_NEG,
+	5,
+	-5
+    },
+    {
+	OP_ADDME,
+	6,
+	5
+    },
+    {
+	OP_ADDZE,
+	5,
+	5
+    },
+    {
+	OP_SUBFME,
+	6,
+	~6 - 1
+    },
+    {
+	OP_SUBFZE,
+	5,
+	~5
+    },
+};
+static unsigned int cpu_post_two_size =
+    sizeof (cpu_post_two_table) / sizeof (struct cpu_post_two_s);
+
+int cpu_post_test_two (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_two_size && ret == 0; i++)
+    {
+	struct cpu_post_two_s *test = cpu_post_two_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_11(test->cmd, reg1, reg0),
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_11(test->cmd, reg1, reg0) | BIT_C,
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    if (ret == 0)
+	    {
+		cr = 0;
+		cpu_post_exec_21 (code, & cr, & res, test->op);
+
+		ret = res == test->res && cr == 0 ? 0 : -1;
+
+		if (ret != 0)
+		{
+		    post_log ("Error at two test %d !\n", i);
+		}
+	    }
+
+	    if (ret == 0)
+	    {
+		cpu_post_exec_21 (codecr, & cr, & res, test->op);
+
+		ret = res == test->res &&
+		      (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+		if (ret != 0)
+		{
+		    post_log ("Error at two test %d !\n", i);
+		}
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/lib_powerpc/twox.c b/roms/u-boot-sam460ex/post/lib_powerpc/twox.c
new file mode 100644
index 000000000..d6714f986
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/lib_powerpc/twox.c
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * CPU test
+ * Binary instructions		instr rA,rS
+ *
+ * Logic instructions:		cntlzw
+ * Arithmetic instructions:	extsb, extsh
+
+ * The test contains a pre-built table of instructions, operands and
+ * expected results. For each table entry, the test will cyclically use
+ * different sets of operand registers and result registers.
+ */
+
+#include <post.h>
+#include "cpu_asm.h"
+
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+
+extern void cpu_post_exec_21 (ulong *code, ulong *cr, ulong *res, ulong op1);
+extern ulong cpu_post_makecr (long v);
+
+static struct cpu_post_twox_s
+{
+    ulong cmd;
+    ulong op;
+    ulong res;
+} cpu_post_twox_table[] =
+{
+    {
+	OP_EXTSB,
+	3,
+	3
+    },
+    {
+	OP_EXTSB,
+	0xff,
+	-1
+    },
+    {
+	OP_EXTSH,
+	3,
+	3
+    },
+    {
+	OP_EXTSH,
+	0xff,
+	0xff
+    },
+    {
+	OP_EXTSH,
+	0xffff,
+	-1
+    },
+    {
+	OP_CNTLZW,
+	0x000fffff,
+	12
+    },
+};
+static unsigned int cpu_post_twox_size =
+    sizeof (cpu_post_twox_table) / sizeof (struct cpu_post_twox_s);
+
+int cpu_post_test_twox (void)
+{
+    int ret = 0;
+    unsigned int i, reg;
+    int flag = disable_interrupts();
+
+    for (i = 0; i < cpu_post_twox_size && ret == 0; i++)
+    {
+	struct cpu_post_twox_s *test = cpu_post_twox_table + i;
+
+	for (reg = 0; reg < 32 && ret == 0; reg++)
+	{
+	    unsigned int reg0 = (reg + 0) % 32;
+	    unsigned int reg1 = (reg + 1) % 32;
+	    unsigned int stk = reg < 16 ? 31 : 15;
+	    unsigned long code[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_11X(test->cmd, reg1, reg0),
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    unsigned long codecr[] =
+	    {
+		ASM_STW(stk, 1, -4),
+		ASM_ADDI(stk, 1, -16),
+		ASM_STW(3, stk, 8),
+		ASM_STW(reg0, stk, 4),
+		ASM_STW(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 8),
+		ASM_11X(test->cmd, reg1, reg0) | BIT_C,
+		ASM_STW(reg1, stk, 8),
+		ASM_LWZ(reg1, stk, 0),
+		ASM_LWZ(reg0, stk, 4),
+		ASM_LWZ(3, stk, 8),
+		ASM_ADDI(1, stk, 16),
+		ASM_LWZ(stk, 1, -4),
+		ASM_BLR,
+	    };
+	    ulong res;
+	    ulong cr;
+
+	    if (ret == 0)
+	    {
+		cr = 0;
+		cpu_post_exec_21 (code, & cr, & res, test->op);
+
+		ret = res == test->res && cr == 0 ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at twox test %d !\n", i);
+		}
+	    }
+
+	    if (ret == 0)
+	    {
+		cpu_post_exec_21 (codecr, & cr, & res, test->op);
+
+		ret = res == test->res &&
+		      (cr & 0xe0000000) == cpu_post_makecr (res) ? 0 : -1;
+
+		if (ret != 0)
+		{
+	            post_log ("Error at twox test %d !\n", i);
+	        }
+	    }
+	}
+    }
+
+    if (flag)
+	enable_interrupts();
+
+    return ret;
+}
+
+#endif
diff --git a/roms/u-boot-sam460ex/post/post.c b/roms/u-boot-sam460ex/post/post.c
new file mode 100644
index 000000000..00e835325
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/post.c
@@ -0,0 +1,487 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <stdio_dev.h>
+#include <watchdog.h>
+#include <post.h>
+
+#ifdef CONFIG_LOGBUFFER
+#include <logbuff.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define POST_MAX_NUMBER		32
+
+#define BOOTMODE_MAGIC	0xDEAD0000
+
+int post_init_f (void)
+{
+	int res = 0;
+	unsigned int i;
+
+	for (i = 0; i < post_list_size; i++) {
+		struct post_test *test = post_list + i;
+
+		if (test->init_f && test->init_f()) {
+			res = -1;
+		}
+	}
+
+	gd->post_init_f_time = post_time_ms(0);
+	if (!gd->post_init_f_time)
+	{
+		printf("post/post.c: post_time_ms seems not to be implemented\n");
+	}
+
+	return res;
+}
+
+/*
+ * Supply a default implementation for post_hotkeys_pressed() for boards
+ * without hotkey support. We always return 0 here, so that the
+ * long-running tests won't be started.
+ *
+ * Boards with hotkey support can override this weak default function
+ * by defining one in their board specific code.
+ */
+int __post_hotkeys_pressed(void)
+{
+	return 0;	/* No hotkeys supported */
+}
+int post_hotkeys_pressed(void)
+	__attribute__((weak, alias("__post_hotkeys_pressed")));
+
+
+void post_bootmode_init (void)
+{
+	int bootmode = post_bootmode_get (0);
+	int newword;
+
+	if (post_hotkeys_pressed() && !(bootmode & POST_POWERTEST)) {
+		newword = BOOTMODE_MAGIC | POST_SLOWTEST;
+	} else if (bootmode == 0) {
+		newword = BOOTMODE_MAGIC | POST_POWERON;
+	} else if (bootmode == POST_POWERON || bootmode == POST_SLOWTEST) {
+		newword = BOOTMODE_MAGIC | POST_NORMAL;
+	} else {
+		/* Use old value */
+		newword = post_word_load () & ~POST_COLDBOOT;
+	}
+
+	if (bootmode == 0)
+	{
+		/* We are booting after power-on */
+		newword |= POST_COLDBOOT;
+	}
+
+	post_word_store (newword);
+
+	/* Reset activity record */
+	gd->post_log_word = 0;
+}
+
+int post_bootmode_get (unsigned int *last_test)
+{
+	unsigned long word = post_word_load ();
+	int bootmode;
+
+	if ((word & 0xFFFF0000) != BOOTMODE_MAGIC) {
+		return 0;
+	}
+
+	bootmode = word & 0x7F;
+
+	if (last_test && (bootmode & POST_POWERTEST)) {
+		*last_test = (word >> 8) & 0xFF;
+	}
+
+	return bootmode;
+}
+
+/* POST tests run before relocation only mark status bits .... */
+static void post_log_mark_start ( unsigned long testid )
+{
+	gd->post_log_word |= (testid)<<16;
+}
+
+static void post_log_mark_succ ( unsigned long testid )
+{
+	gd->post_log_word |= testid;
+}
+
+/* ... and the messages are output once we are relocated */
+void post_output_backlog ( void )
+{
+	int j;
+
+	for (j = 0; j < post_list_size; j++) {
+		if (gd->post_log_word & (post_list[j].testid<<16)) {
+			post_log ("POST %s ", post_list[j].cmd);
+			if (gd->post_log_word & post_list[j].testid)
+				post_log ("PASSED\n");
+			else {
+				post_log ("FAILED\n");
+				show_boot_progress (-31);
+			}
+		}
+	}
+}
+
+static void post_bootmode_test_on (unsigned int last_test)
+{
+	unsigned long word = post_word_load ();
+
+	word |= POST_POWERTEST;
+
+	word |= (last_test & 0xFF) << 8;
+
+	post_word_store (word);
+}
+
+static void post_bootmode_test_off (void)
+{
+	unsigned long word = post_word_load ();
+
+	word &= ~POST_POWERTEST;
+
+	post_word_store (word);
+}
+
+static void post_get_flags (int *test_flags)
+{
+	int  flag[] = {  POST_POWERON,   POST_NORMAL,   POST_SLOWTEST,
+			 POST_CRITICAL };
+	char *var[] = { "post_poweron", "post_normal", "post_slowtest",
+			"post_critical" };
+	int varnum = sizeof (var) / sizeof (var[0]);
+	char list[128];			/* long enough for POST list */
+	char *name;
+	char *s;
+	int last;
+	int i, j;
+
+	for (j = 0; j < post_list_size; j++) {
+		test_flags[j] = post_list[j].flags;
+	}
+
+	for (i = 0; i < varnum; i++) {
+		if (getenv_r (var[i], list, sizeof (list)) <= 0)
+			continue;
+
+		for (j = 0; j < post_list_size; j++) {
+			test_flags[j] &= ~flag[i];
+		}
+
+		last = 0;
+		name = list;
+		while (!last) {
+			while (*name && *name == ' ')
+				name++;
+			if (*name == 0)
+				break;
+			s = name + 1;
+			while (*s && *s != ' ')
+				s++;
+			if (*s == 0)
+				last = 1;
+			else
+				*s = 0;
+
+			for (j = 0; j < post_list_size; j++) {
+				if (strcmp (post_list[j].cmd, name) == 0) {
+					test_flags[j] |= flag[i];
+					break;
+				}
+			}
+
+			if (j == post_list_size) {
+				printf ("No such test: %s\n", name);
+			}
+
+			name = s + 1;
+		}
+	}
+
+	for (j = 0; j < post_list_size; j++) {
+		if (test_flags[j] & POST_POWERON) {
+			test_flags[j] |= POST_SLOWTEST;
+		}
+	}
+}
+
+void __show_post_progress (unsigned int test_num, int before, int result)
+{
+}
+void show_post_progress (unsigned int, int, int)
+			__attribute__((weak, alias("__show_post_progress")));
+
+static int post_run_single (struct post_test *test,
+				int test_flags, int flags, unsigned int i)
+{
+	if ((flags & test_flags & POST_ALWAYS) &&
+		(flags & test_flags & POST_MEM)) {
+		WATCHDOG_RESET ();
+
+		if (!(flags & POST_REBOOT)) {
+			if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) {
+				post_bootmode_test_on (
+					(gd->flags & GD_FLG_POSTFAIL) ?
+						POST_FAIL_SAVE | i : i);
+			}
+
+			if (test_flags & POST_PREREL)
+				post_log_mark_start ( test->testid );
+			else
+				post_log ("POST %s ", test->cmd);
+		}
+
+		show_post_progress(i, POST_BEFORE, POST_FAILED);
+
+		if (test_flags & POST_PREREL) {
+			if ((*test->test) (flags) == 0) {
+				post_log_mark_succ ( test->testid );
+				show_post_progress(i, POST_AFTER, POST_PASSED);
+			}
+			else {
+				show_post_progress(i, POST_AFTER, POST_FAILED);
+				if (test_flags & POST_CRITICAL)
+					gd->flags |= GD_FLG_POSTFAIL;
+				if (test_flags & POST_STOP)
+					gd->flags |= GD_FLG_POSTSTOP;
+			}
+		} else {
+		if ((*test->test) (flags) != 0) {
+			post_log ("FAILED\n");
+			show_boot_progress (-32);
+			show_post_progress(i, POST_AFTER, POST_FAILED);
+			if (test_flags & POST_CRITICAL)
+				gd->flags |= GD_FLG_POSTFAIL;
+			if (test_flags & POST_STOP)
+				gd->flags |= GD_FLG_POSTSTOP;
+		}
+		else
+			post_log ("PASSED\n");
+			show_post_progress(i, POST_AFTER, POST_PASSED);
+		}
+
+		if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) {
+			post_bootmode_test_off ();
+		}
+
+		return 0;
+	} else {
+		return -1;
+	}
+}
+
+int post_run (char *name, int flags)
+{
+	unsigned int i;
+	int test_flags[POST_MAX_NUMBER];
+
+	post_get_flags (test_flags);
+
+	if (name == NULL) {
+		unsigned int last;
+
+		if (gd->flags & GD_FLG_POSTSTOP)
+			return 0;
+
+		if (post_bootmode_get (&last) & POST_POWERTEST) {
+			if (last & POST_FAIL_SAVE) {
+				last &= ~POST_FAIL_SAVE;
+				gd->flags |= GD_FLG_POSTFAIL;
+			}
+			if (last < post_list_size &&
+				(flags & test_flags[last] & POST_ALWAYS) &&
+				(flags & test_flags[last] & POST_MEM)) {
+
+				post_run_single (post_list + last,
+						 test_flags[last],
+						 flags | POST_REBOOT, last);
+
+				for (i = last + 1; i < post_list_size; i++) {
+					if (gd->flags & GD_FLG_POSTSTOP)
+						break;
+					post_run_single (post_list + i,
+							 test_flags[i],
+							 flags, i);
+				}
+			}
+		} else {
+			for (i = 0; i < post_list_size; i++) {
+				if (gd->flags & GD_FLG_POSTSTOP)
+					break;
+				post_run_single (post_list + i,
+						 test_flags[i],
+						 flags, i);
+			}
+		}
+
+		return 0;
+	} else {
+		for (i = 0; i < post_list_size; i++) {
+			if (strcmp (post_list[i].cmd, name) == 0)
+				break;
+		}
+
+		if (i < post_list_size) {
+			WATCHDOG_RESET();
+			return post_run_single (post_list + i,
+						test_flags[i],
+						flags, i);
+		} else {
+			return -1;
+		}
+	}
+}
+
+static int post_info_single (struct post_test *test, int full)
+{
+	if (test->flags & POST_MANUAL) {
+		if (full)
+			printf ("%s - %s\n"
+				"  %s\n", test->cmd, test->name, test->desc);
+		else
+			printf ("  %-15s - %s\n", test->cmd, test->name);
+
+		return 0;
+	} else {
+		return -1;
+	}
+}
+
+int post_info (char *name)
+{
+	unsigned int i;
+
+	if (name == NULL) {
+		for (i = 0; i < post_list_size; i++) {
+			post_info_single (post_list + i, 0);
+		}
+
+		return 0;
+	} else {
+		for (i = 0; i < post_list_size; i++) {
+			if (strcmp (post_list[i].cmd, name) == 0)
+				break;
+		}
+
+		if (i < post_list_size) {
+			return post_info_single (post_list + i, 1);
+		} else {
+			return -1;
+		}
+	}
+}
+
+int post_log (char *format, ...)
+{
+	va_list args;
+	uint i;
+	char printbuffer[CONFIG_SYS_PBSIZE];
+
+	va_start (args, format);
+
+	/* For this to work, printbuffer must be larger than
+	 * anything we ever want to print.
+	 */
+	i = vsprintf (printbuffer, format, args);
+	va_end (args);
+
+#ifdef CONFIG_LOGBUFFER
+	/* Send to the logbuffer */
+	logbuff_log (printbuffer);
+#else
+	/* Send to the stdout file */
+	puts (printbuffer);
+#endif
+
+	return 0;
+}
+
+#ifndef CONFIG_RELOC_FIXUP_WORKS
+void post_reloc (void)
+{
+	unsigned int i;
+
+	/*
+	 * We have to relocate the test table manually
+	 */
+	for (i = 0; i < post_list_size; i++) {
+		ulong addr;
+		struct post_test *test = post_list + i;
+
+		if (test->name) {
+			addr = (ulong) (test->name) + gd->reloc_off;
+			test->name = (char *) addr;
+		}
+
+		if (test->cmd) {
+			addr = (ulong) (test->cmd) + gd->reloc_off;
+			test->cmd = (char *) addr;
+		}
+
+		if (test->desc) {
+			addr = (ulong) (test->desc) + gd->reloc_off;
+			test->desc = (char *) addr;
+		}
+
+		if (test->test) {
+			addr = (ulong) (test->test) + gd->reloc_off;
+			test->test = (int (*)(int flags)) addr;
+		}
+
+		if (test->init_f) {
+			addr = (ulong) (test->init_f) + gd->reloc_off;
+			test->init_f = (int (*)(void)) addr;
+		}
+
+		if (test->reloc) {
+			addr = (ulong) (test->reloc) + gd->reloc_off;
+			test->reloc = (void (*)(void)) addr;
+
+			test->reloc();
+		}
+	}
+}
+#endif
+
+
+/*
+ * Some tests (e.g. SYSMON) need the time when post_init_f started,
+ * but we cannot use get_timer() at this point.
+ *
+ * On PowerPC we implement it using the timebase register.
+ */
+unsigned long post_time_ms (unsigned long base)
+{
+#ifdef CONFIG_PPC
+	return (unsigned long)(get_ticks () / (get_tbclk () / CONFIG_SYS_HZ)) - base;
+#else
+#warning "Not implemented yet"
+	return 0; /* Not implemented yet */
+#endif
+}
diff --git a/roms/u-boot-sam460ex/post/rules.mk b/roms/u-boot-sam460ex/post/rules.mk
new file mode 100644
index 000000000..1efc9c7d9
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/rules.mk
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+COBJS	:= $(COBJS-y)
+AOBJS	:= $(AOBJS-y)
+SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
+LIB	:= $(obj)$(LIB)
+
+CPPFLAGS += -I$(TOPDIR)
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/roms/u-boot-sam460ex/post/tests.c b/roms/u-boot-sam460ex/post/tests.c
new file mode 100644
index 000000000..a4066f9f8
--- /dev/null
+++ b/roms/u-boot-sam460ex/post/tests.c
@@ -0,0 +1,304 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Be sure to mark tests to be run before relocation as such with the
+ * CONFIG_SYS_POST_PREREL flag so that logging is done correctly if the
+ * logbuffer support is enabled.
+ */
+
+#include <common.h>
+
+#include <post.h>
+
+extern int ocm_post_test (int flags);
+extern int cache_post_test (int flags);
+extern int watchdog_post_test (int flags);
+extern int i2c_post_test (int flags);
+extern int rtc_post_test (int flags);
+extern int memory_post_test (int flags);
+extern int cpu_post_test (int flags);
+extern int fpu_post_test (int flags);
+extern int uart_post_test (int flags);
+extern int ether_post_test (int flags);
+extern int spi_post_test (int flags);
+extern int usb_post_test (int flags);
+extern int spr_post_test (int flags);
+extern int sysmon_post_test (int flags);
+extern int dsp_post_test (int flags);
+extern int codec_post_test (int flags);
+extern int ecc_post_test (int flags);
+
+extern int dspic_init_post_test (int flags);
+extern int dspic_post_test (int flags);
+extern int gdc_post_test (int flags);
+extern int fpga_post_test (int flags);
+extern int lwmon5_watchdog_post_test(int flags);
+extern int sysmon1_post_test(int flags);
+extern int coprocessor_post_test(int flags);
+
+extern int sysmon_init_f (void);
+
+extern void sysmon_reloc (void);
+
+
+struct post_test post_list[] =
+{
+#if CONFIG_POST & CONFIG_SYS_POST_OCM
+    {
+	"OCM test",
+	"ocm",
+	"This test checks on chip memory (OCM).",
+	POST_ROM | POST_ALWAYS | POST_PREREL | POST_CRITICAL | POST_STOP,
+	&ocm_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_OCM
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_CACHE
+    {
+	"Cache test",
+	"cache",
+	"This test verifies the CPU cache operation.",
+	POST_RAM | POST_ALWAYS,
+	&cache_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_CACHE
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG
+#if defined(CONFIG_POST_WATCHDOG)
+	CONFIG_POST_WATCHDOG,
+#else
+    {
+	"Watchdog timer test",
+	"watchdog",
+	"This test checks the watchdog timer.",
+	POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT,
+	&watchdog_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_WATCHDOG
+    },
+#endif
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_I2C
+    {
+	"I2C test",
+	"i2c",
+	"This test verifies the I2C operation.",
+	POST_RAM | POST_ALWAYS,
+	&i2c_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_I2C
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_RTC
+    {
+	"RTC test",
+	"rtc",
+	"This test verifies the RTC operation.",
+	POST_RAM | POST_SLOWTEST | POST_MANUAL,
+	&rtc_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_RTC
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
+    {
+	"Memory test",
+	"memory",
+	"This test checks RAM.",
+	POST_ROM | POST_POWERON | POST_SLOWTEST | POST_PREREL,
+	&memory_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_MEMORY
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_CPU
+    {
+	"CPU test",
+	"cpu",
+	"This test verifies the arithmetic logic unit of"
+	" CPU.",
+	POST_RAM | POST_ALWAYS,
+	&cpu_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_CPU
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_FPU
+    {
+	"FPU test",
+	"fpu",
+	"This test verifies the arithmetic logic unit of"
+	" FPU.",
+	POST_RAM | POST_ALWAYS,
+	&fpu_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_FPU
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_UART
+    {
+	"UART test",
+	"uart",
+	"This test verifies the UART operation.",
+	POST_RAM | POST_SLOWTEST | POST_MANUAL,
+	&uart_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_UART
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_ETHER
+    {
+	"ETHERNET test",
+	"ethernet",
+	"This test verifies the ETHERNET operation.",
+	POST_RAM | POST_ALWAYS | POST_MANUAL,
+	&ether_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_ETHER
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_SPI
+    {
+	"SPI test",
+	"spi",
+	"This test verifies the SPI operation.",
+	POST_RAM | POST_ALWAYS | POST_MANUAL,
+	&spi_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_SPI
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_USB
+    {
+	"USB test",
+	"usb",
+	"This test verifies the USB operation.",
+	POST_RAM | POST_ALWAYS | POST_MANUAL,
+	&usb_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_USB
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_SPR
+    {
+	"SPR test",
+	"spr",
+	"This test checks SPR contents.",
+	POST_RAM | POST_ALWAYS,
+	&spr_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_SPR
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_SYSMON
+    {
+	"SYSMON test",
+	"sysmon",
+	"This test monitors system hardware.",
+	POST_RAM | POST_ALWAYS,
+	&sysmon_post_test,
+	&sysmon_init_f,
+	&sysmon_reloc,
+	CONFIG_SYS_POST_SYSMON
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_DSP
+    {
+	"DSP test",
+	"dsp",
+	"This test checks any connected DSP(s).",
+	POST_RAM | POST_ALWAYS | POST_MANUAL,
+	&dsp_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_DSP
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_CODEC
+    {
+	"CODEC test",
+	"codec",
+	"This test checks any connected codec(s).",
+	POST_RAM | POST_MANUAL,
+	&codec_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_CODEC
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_ECC
+    {
+	"ECC test",
+	"ecc",
+	"This test checks the ECC facility of memory.",
+	POST_ROM | POST_ALWAYS | POST_PREREL,
+	&ecc_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_ECC
+    },
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
+	CONFIG_POST_BSPEC1,
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
+	CONFIG_POST_BSPEC2,
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC3
+	CONFIG_POST_BSPEC3,
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC4
+	CONFIG_POST_BSPEC4,
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_BSPEC5
+	CONFIG_POST_BSPEC5,
+#endif
+#if CONFIG_POST & CONFIG_SYS_POST_COPROC
+    {
+	"Coprocessors communication test",
+	"coproc_com",
+	"This test checks communication with coprocessors.",
+	POST_RAM | POST_ALWAYS | POST_CRITICAL,
+	&coprocessor_post_test,
+	NULL,
+	NULL,
+	CONFIG_SYS_POST_COPROC
+    }
+#endif
+};
+
+unsigned int post_list_size = sizeof (post_list) / sizeof (struct post_test);