diff options
| author |   Angelos Mouzakitis <a.mouzakitis@virtualopensystems.com> | 2023-10-10 14:33:42 +0000 |
|---|---|---|
| committer | Angelos Mouzakitis <a.mouzakitis@virtualopensystems.com> | 2023-10-10 14:33:42 +0000 |
| commit | af1a266670d040d2f4083ff309d732d648afba2a (patch) | |
| tree | 2fc46203448ddcc6f81546d379abfaeb323575e9 /roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c | |
| parent | e02cda008591317b1625707ff8e115a4841aa889 (diff) | |
Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec
Diffstat (limited to 'roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c')
| -rw-r--r-- | roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c | 60 |
1 files changed, 60 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c b/roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c new file mode 100644 index 000000000..c849885bc --- /dev/null +++ b/roms/u-boot/arch/arm/mach-at91/arm920t/at91rm9200_devices.c @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * [partely copied from arch/arm/cpu/arm926ejs/at91/arm9260_devices.c] + * + * (C) Copyright 2011 + * Andreas Bießmann <andreas@biessmann.org> + * + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif + +void at91_serial0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, PUP); /* RXD0 */ + at91_periph_clk_enable(ATMEL_ID_USART0); +} + +void at91_serial1_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 20, PUP); /* RXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 21, 1); /* TXD1 */ + at91_periph_clk_enable(ATMEL_ID_USART1); +} + +void at91_serial2_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 22, PUP); /* RXD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 23, 1); /* TXD2 */ + at91_periph_clk_enable(ATMEL_ID_USART2); +} + +void at91_seriald_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 30, PUP); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 31, 1); /* DTXD */ + /* writing SYS to PCER has no effect on AT91RM9200 */ +} |