Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

12 files changed, 2154 insertions, 0 deletions

diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/Kconfig b/roms/u-boot/arch/powerpc/cpu/mpc8xx/Kconfig
new file mode 100644
index 000000000..f11231737
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -0,0 +1,175 @@
+menu "mpc8xx CPU"
+	depends on MPC8xx
+
+config SYS_CPU
+	default "mpc8xx"
+
+choice
+	prompt "Target select"
+	optional
+
+config TARGET_MCR3000
+	bool "Support MCR3000 board from CSSI"
+
+endchoice
+
+choice
+	prompt "CPU select"
+	default MPC866
+
+config MPC866
+	bool "MPC866"
+
+config MPC885
+	bool "MPC885"
+
+endchoice
+
+config 8xx_GCLK_FREQ
+	int "CPU GCLK Frequency"
+
+comment "Specific commands"
+
+config CMD_IMMAP
+	bool "Enable various commands to dump IMMR information"
+	help
+	  This enables various commands such as:
+
+	    siuinfo - print System Interface Unit (SIU) registers
+	    memcinfo - print Memory Controller registers
+
+comment "Configuration Registers"
+
+config SYS_SIUMCR
+	hex "SIUMCR register"
+	help
+	  SIU Module Configuration (11-6)
+
+config SYS_SYPCR
+	hex "SYPCR register"
+	help
+	  System Protection Control (11-9)
+
+config SYS_TBSCR
+	hex "TBSCR register"
+	help
+	  Time Base Status and Control (11-26)
+
+config SYS_PISCR
+	hex "PISCR register"
+	help
+	  Periodic Interrupt Status and Control (11-31)
+
+config SYS_PLPRCR_BOOL
+	bool "Customise PLPRCR"
+
+config SYS_PLPRCR
+	hex "PLPRCR register"
+	depends on SYS_PLPRCR_BOOL
+	help
+	  PLL, Low-Power, and Reset Control Register (15-30)
+
+config SYS_SCCR
+	hex "SCCR register"
+	help
+	  System Clock and reset Control Register (15-27)
+
+config SYS_SCCR_MASK
+	hex "MASK for setting SCCR register"
+
+config SYS_DER
+	hex "DER register"
+	help
+	  Debug Event Register (37-47)
+
+comment "Memory mapping"
+
+config SYS_BR0_PRELIM
+	hex "Preliminary value for BR0"
+
+config SYS_OR0_PRELIM
+	hex "Preliminary value for OR0"
+
+config SYS_BR1_PRELIM_BOOL
+	bool "Define Bank 1"
+
+config SYS_BR1_PRELIM
+	hex "Preliminary value for BR1"
+	depends on SYS_BR1_PRELIM_BOOL
+
+config SYS_OR1_PRELIM
+	hex "Preliminary value for OR1"
+	depends on SYS_BR1_PRELIM_BOOL
+
+config SYS_BR2_PRELIM_BOOL
+	bool "Define Bank 2"
+
+config SYS_BR2_PRELIM
+	hex "Preliminary value for BR2"
+	depends on SYS_BR2_PRELIM_BOOL
+
+config SYS_OR2_PRELIM
+	hex "Preliminary value for OR2"
+	depends on SYS_BR2_PRELIM_BOOL
+
+config SYS_BR3_PRELIM_BOOL
+	bool "Define Bank 3"
+
+config SYS_BR3_PRELIM
+	hex "Preliminary value for BR3"
+	depends on SYS_BR3_PRELIM_BOOL
+
+config SYS_OR3_PRELIM
+	hex "Preliminary value for OR3"
+	depends on SYS_BR3_PRELIM_BOOL
+
+config SYS_BR4_PRELIM_BOOL
+	bool "Define Bank 4"
+
+config SYS_BR4_PRELIM
+	hex "Preliminary value for BR4"
+	depends on SYS_BR4_PRELIM_BOOL
+
+config SYS_OR4_PRELIM
+	hex "Preliminary value for OR4"
+	depends on SYS_BR4_PRELIM_BOOL
+
+config SYS_BR5_PRELIM_BOOL
+	bool "Define Bank 5"
+
+config SYS_BR5_PRELIM
+	hex "Preliminary value for BR5"
+	depends on SYS_BR5_PRELIM_BOOL
+
+config SYS_OR5_PRELIM
+	hex "Preliminary value for OR5"
+	depends on SYS_BR5_PRELIM_BOOL
+
+config SYS_BR6_PRELIM_BOOL
+	bool "Define Bank 6"
+
+config SYS_BR6_PRELIM
+	hex "Preliminary value for BR6"
+	depends on SYS_BR6_PRELIM_BOOL
+
+config SYS_OR6_PRELIM
+	hex "Preliminary value for OR6"
+	depends on SYS_BR6_PRELIM_BOOL
+
+config SYS_BR7_PRELIM_BOOL
+	bool "Define Bank 7"
+
+config SYS_BR7_PRELIM
+	hex "Preliminary value for BR7"
+	depends on SYS_BR7_PRELIM_BOOL
+
+config SYS_OR7_PRELIM
+	hex "Preliminary value for OR7"
+	depends on SYS_BR7_PRELIM_BOOL
+
+config SYS_IMMR
+	hex "Value for IMMR"
+
+source "board/cssi/MCR3000/Kconfig"
+
+endmenu
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/Makefile b/roms/u-boot/arch/powerpc/cpu/mpc8xx/Makefile
new file mode 100644
index 000000000..8918a2628
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+extra-y += start.o
+extra-y += traps.o
+obj-y	+= cpu.o
+obj-y	+= cpu_init.o
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
+obj-$(CONFIG_CMD_IMMAP) += immap.o
+obj-y	+= interrupts.o
+obj-y	+= speed.o
+obj-y	+= cache.o
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/cache.c b/roms/u-boot/arch/powerpc/cpu/mpc8xx/cache.c
new file mode 100644
index 000000000..41559009c
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/cache.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017
+ * Christophe Leroy, CS Systemes d'Information, christophe.leroy@c-s.fr
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <asm/processor.h>
+#include <asm/ppc.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+
+int icache_status(void)
+{
+	return !!(mfspr(IC_CST) & IDC_ENABLED);
+}
+
+void icache_enable(void)
+{
+	sync();
+	mtspr(IC_CST, IDC_INVALL);
+	mtspr(IC_CST, IDC_ENABLE);
+}
+
+void icache_disable(void)
+{
+	sync();
+	mtspr(IC_CST, IDC_DISABLE);
+}
+
+int dcache_status(void)
+{
+	return !!(mfspr(IC_CST) & IDC_ENABLED);
+}
+
+void dcache_enable(void)
+{
+	mtspr(MD_CTR, MD_RESETVAL);	/* Set cache mode with MMU off */
+	mtspr(DC_CST, IDC_INVALL);
+	mtspr(DC_CST, IDC_ENABLE);
+}
+
+void dcache_disable(void)
+{
+	sync();
+	mtspr(DC_CST, IDC_DISABLE);
+	mtspr(DC_CST, IDC_INVALL);
+}
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/config.mk b/roms/u-boot/arch/powerpc/cpu/mpc8xx/config.mk
new file mode 100644
index 000000000..00b7ed50a
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/config.mk
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000-2010
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+PLATFORM_CPPFLAGS += -mstring -mcpu=860 -msoft-float
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu.c b/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu.c
new file mode 100644
index 000000000..893aecef2
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+/*
+ * m8xx.c
+ *
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <net.h>
+#include <time.h>
+#include <vsprintf.h>
+#include <watchdog.h>
+#include <command.h>
+#include <mpc8xx.h>
+#include <netdev.h>
+#include <asm/cache.h>
+#include <asm/cpm_8xx.h>
+#include <asm/global_data.h>
+#include <linux/compiler.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/* L1 i-cache                                                                */
+
+int checkicache(void)
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	memctl8xx_t __iomem *memctl = &immap->im_memctl;
+	u32 cacheon = rd_ic_cst() & IDC_ENABLED;
+	/* probe in flash memoryarea */
+	u32 k = in_be32(&memctl->memc_br0) & ~0x00007fff;
+	u32 m;
+	u32 lines = -1;
+
+	wr_ic_cst(IDC_UNALL);
+	wr_ic_cst(IDC_INVALL);
+	wr_ic_cst(IDC_DISABLE);
+	__asm__ volatile ("isync");
+
+	while (!((m = rd_ic_cst()) & IDC_CERR2)) {
+		wr_ic_adr(k);
+		wr_ic_cst(IDC_LDLCK);
+		__asm__ volatile ("isync");
+
+		lines++;
+		k += 0x10;	/* the number of bytes in a cacheline */
+	}
+
+	wr_ic_cst(IDC_UNALL);
+	wr_ic_cst(IDC_INVALL);
+
+	if (cacheon)
+		wr_ic_cst(IDC_ENABLE);
+	else
+		wr_ic_cst(IDC_DISABLE);
+
+	__asm__ volatile ("isync");
+
+	return lines << 4;
+};
+
+/* ------------------------------------------------------------------------- */
+/* L1 d-cache                                                                */
+/* call with cache disabled                                                  */
+
+static int checkdcache(void)
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	memctl8xx_t __iomem *memctl = &immap->im_memctl;
+	u32 cacheon = rd_dc_cst() & IDC_ENABLED;
+	/* probe in flash memoryarea */
+	u32 k = in_be32(&memctl->memc_br0) & ~0x00007fff;
+	u32 m;
+	u32 lines = -1;
+
+	wr_dc_cst(IDC_UNALL);
+	wr_dc_cst(IDC_INVALL);
+	wr_dc_cst(IDC_DISABLE);
+
+	while (!((m = rd_dc_cst()) & IDC_CERR2)) {
+		wr_dc_adr(k);
+		wr_dc_cst(IDC_LDLCK);
+		lines++;
+		k += 0x10;	/* the number of bytes in a cacheline */
+	}
+
+	wr_dc_cst(IDC_UNALL);
+	wr_dc_cst(IDC_INVALL);
+
+	if (cacheon)
+		wr_dc_cst(IDC_ENABLE);
+	else
+		wr_dc_cst(IDC_DISABLE);
+
+	return lines << 4;
+};
+
+static int check_CPU(long clock, uint pvr, uint immr)
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	uint k;
+	char buf[32];
+
+	/* the highest 16 bits should be 0x0050 for a 860 */
+
+	if (PVR_VER(pvr) != PVR_VER(PVR_8xx))
+		return -1;
+
+	k = (immr << 16) |
+	    in_be16(&immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]);
+
+	/*
+	 * Some boards use sockets so different CPUs can be used.
+	 * We have to check chip version in run time.
+	 */
+	switch (k) {
+		/* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
+	case 0x08010004:		/* Rev. A.0 */
+		printf("MPC866xxxZPnnA");
+		break;
+	case 0x08000003:		/* Rev. 0.3 */
+		printf("MPC866xxxZPnn");
+		break;
+	case 0x09000000:		/* 870/875/880/885 */
+		puts("MPC885ZPnn");
+		break;
+
+	default:
+		printf("unknown MPC86x (0x%08x)", k);
+		break;
+	}
+
+	printf(" at %s MHz: ", strmhz(buf, clock));
+
+	print_size(checkicache(), " I-Cache ");
+	print_size(checkdcache(), " D-Cache");
+
+	/* do we have a FEC (860T/P or 852/859/866/885)? */
+
+	out_be32(&immap->im_cpm.cp_fec.fec_addr_low, 0x12345678);
+	if (in_be32(&immap->im_cpm.cp_fec.fec_addr_low) == 0x12345678)
+		printf(" FEC present");
+
+	putc('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+int checkcpu(void)
+{
+	ulong clock = gd->cpu_clk;
+	uint immr = get_immr();	/* Return full IMMR contents */
+	uint pvr = get_pvr();
+
+	puts("CPU:   ");
+
+	return check_CPU(clock, pvr, immr);
+}
+
+/* ------------------------------------------------------------------------- */
+
+void upmconfig(uint upm, uint *table, uint size)
+{
+	uint i;
+	uint addr = 0;
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	memctl8xx_t __iomem *memctl = &immap->im_memctl;
+
+	for (i = 0; i < size; i++) {
+		out_be32(&memctl->memc_mdr, table[i]);		/* (16-15) */
+		out_be32(&memctl->memc_mcr, addr | upm);	/* (16-16) */
+		addr++;
+	}
+}
+
+/* ------------------------------------------------------------------------- */
+
+int do_reset(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	ulong msr, addr;
+
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+	/* Checkstop Reset enable */
+	setbits_be32(&immap->im_clkrst.car_plprcr, PLPRCR_CSR);
+
+	/* Interrupts and MMU off */
+	__asm__ volatile ("mtspr    81, 0");
+	__asm__ volatile ("mfmsr    %0" : "=r" (msr));
+
+	msr &= ~0x1030;
+	__asm__ volatile ("mtmsr    %0" : : "r" (msr));
+
+	/*
+	 * Trying to execute the next instruction at a non-existing address
+	 * should cause a machine check, resulting in reset
+	 */
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+	/*
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+	 * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid address.
+	 * Better pick an address known to be invalid on your system and assign
+	 * it to CONFIG_SYS_RESET_ADDRESS.
+	 * "(ulong)-1" used to be a good choice for many systems...
+	 */
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof(ulong);
+#endif
+	((void (*)(void)) addr)();
+	return 1;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Get timebase clock frequency (like cpu_clk in Hz)
+ *
+ * See sections 14.2 and 14.6 of the User's Manual
+ */
+unsigned long get_tbclk(void)
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	ulong oscclk, factor, pll;
+
+	if (in_be32(&immap->im_clkrst.car_sccr) & SCCR_TBS)
+		return gd->cpu_clk / 16;
+
+	pll = in_be32(&immap->im_clkrst.car_plprcr);
+
+#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+
+	/*
+	 * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
+	 * factor is calculated as follows:
+	 *
+	 *		     MFN
+	 *	     MFI + -------
+	 *		   MFD + 1
+	 * factor =  -----------------
+	 *	     (PDF + 1) * 2^S
+	 *
+	 */
+	factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD) + 1)) /
+		 (PLPRCR_val(PDF) + 1) / (1 << PLPRCR_val(S));
+
+	oscclk = gd->cpu_clk / factor;
+
+	if ((in_be32(&immap->im_clkrst.car_sccr) & SCCR_RTSEL) == 0 ||
+	    factor > 2)
+		return oscclk / 4;
+
+	return oscclk / 16;
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
+ */
+int cpu_eth_init(struct bd_info *bis)
+{
+#if defined(CONFIG_MPC8XX_FEC)
+	fec_initialize(bis);
+#endif
+	return 0;
+}
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu_init.c b/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu_init.c
new file mode 100644
index 000000000..c8d06b050
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <watchdog.h>
+
+#include <mpc8xx.h>
+#include <asm/cpm_8xx.h>
+#include <asm/io.h>
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f(immap_t __iomem *immr)
+{
+	memctl8xx_t __iomem *memctl = &immr->im_memctl;
+	ulong reg;
+
+	/* SYPCR - contains watchdog control (11-9) */
+
+#ifndef CONFIG_HW_WATCHDOG
+	/* deactivate watchdog if not enabled in config */
+	out_be32(&immr->im_siu_conf.sc_sypcr, CONFIG_SYS_SYPCR & ~SYPCR_SWE);
+#endif
+
+	WATCHDOG_RESET();
+
+	/* SIUMCR - contains debug pin configuration (11-6) */
+	setbits_be32(&immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR);
+	/* initialize timebase status and control register (11-26) */
+	/* unlock TBSCRK */
+
+	out_be32(&immr->im_sitk.sitk_tbscrk, KAPWR_KEY);
+	out_be16(&immr->im_sit.sit_tbscr, CONFIG_SYS_TBSCR | TBSCR_TBE);
+
+	/* Unlock timebase register */
+	out_be32(&immr->im_sitk.sitk_tbk, KAPWR_KEY);
+
+	/* initialize the PIT (11-31) */
+
+	out_be32(&immr->im_sitk.sitk_piscrk, KAPWR_KEY);
+	out_be16(&immr->im_sit.sit_piscr, CONFIG_SYS_PISCR);
+
+	/* System integration timers. Don't change EBDF! (15-27) */
+
+	out_be32(&immr->im_clkrstk.cark_sccrk, KAPWR_KEY);
+	clrsetbits_be32(&immr->im_clkrst.car_sccr, ~CONFIG_SYS_SCCR_MASK,
+			CONFIG_SYS_SCCR);
+
+	/*
+	 * MPC866/885 ERRATA GLL2
+	 * Description:
+	 *   In 1:2:1 mode, when HRESET is detected at the positive edge of
+	 *   EXTCLK, then there will be a loss of phase between
+	 *   EXTCLK and CLKOUT.
+	 *
+	 * Workaround:
+	 *   Reprogram the SCCR:
+	 *   1.   Write 1'b00 to SCCR[EBDF].
+	 *   2.   Write 1'b01 to SCCR[EBDF].
+	 *   3.   Rewrite the desired value to the PLPRCR register.
+	 */
+	reg = in_be32(&immr->im_clkrst.car_sccr);
+	/* Are we in mode 1:2:1 ? */
+	if ((reg & SCCR_EBDF11) == SCCR_EBDF01) {
+		clrbits_be32(&immr->im_clkrst.car_sccr, SCCR_EBDF11);
+		setbits_be32(&immr->im_clkrst.car_sccr, SCCR_EBDF01);
+	}
+
+	/* PLL (CPU clock) settings (15-30) */
+
+	out_be32(&immr->im_clkrstk.cark_plprcrk, KAPWR_KEY);
+
+	/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
+	 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
+	 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
+	 * field value.
+	 *
+	 * For newer (starting MPC866) chips PLPRCR layout is different.
+	 */
+#ifdef CONFIG_SYS_PLPRCR
+	if ((CONFIG_SYS_PLPRCR & PLPRCR_MFACT_MSK) != 0) /* reset control bits*/
+		out_be32(&immr->im_clkrst.car_plprcr, CONFIG_SYS_PLPRCR);
+	else /* isolate MF-related fields and reset control bits */
+		clrsetbits_be32(&immr->im_clkrst.car_plprcr, ~PLPRCR_MFACT_MSK,
+				CONFIG_SYS_PLPRCR);
+#endif
+
+	/*
+	 * Memory Controller:
+	 */
+
+	/* Clear everything except Port Size bits & add the "Bank Valid" bit */
+	clrsetbits_be32(&memctl->memc_br0, ~BR_PS_MSK, BR_V);
+
+	/* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
+	 * preliminary addresses - these have to be modified later
+	 * when FLASH size has been determined
+	 *
+	 * Depending on the size of the memory region defined by
+	 * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
+	 * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
+	 * map CONFIG_SYS_MONITOR_BASE.
+	 *
+	 * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
+	 * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
+	 *
+	 * If BR0 wasn't loaded with address base 0xff000000, then BR0's
+	 * base address remains as 0x00000000. However, the address mask
+	 * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
+	 * into the Bank0.
+	 *
+	 * This is why CONFIG_IVMS8 and similar boards must load BR0 with
+	 * CONFIG_SYS_BR0_PRELIM in advance.
+	 *
+	 * [Thanks to Michael Liao for this explanation.
+	 *  I owe him a free beer. - wd]
+	 */
+
+#if defined(CONFIG_SYS_OR0_REMAP)
+	out_be32(&memctl->memc_or0, CONFIG_SYS_OR0_REMAP);
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+	out_be32(&memctl->memc_or1, CONFIG_SYS_OR1_REMAP);
+#endif
+#if defined(CONFIG_SYS_OR5_REMAP)
+	out_be32(&memctl->memc_or5, CONFIG_SYS_OR5_REMAP);
+#endif
+
+	/* now restrict to preliminary range */
+	out_be32(&memctl->memc_br0, CONFIG_SYS_BR0_PRELIM);
+	out_be32(&memctl->memc_or0, CONFIG_SYS_OR0_PRELIM);
+
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+	out_be32(&memctl->memc_or1, CONFIG_SYS_OR1_PRELIM);
+	out_be32(&memctl->memc_br1, CONFIG_SYS_BR1_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+	out_be32(&memctl->memc_or2, CONFIG_SYS_OR2_PRELIM);
+	out_be32(&memctl->memc_br2, CONFIG_SYS_BR2_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+	out_be32(&memctl->memc_or3, CONFIG_SYS_OR3_PRELIM);
+	out_be32(&memctl->memc_br3, CONFIG_SYS_BR3_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
+	out_be32(&memctl->memc_or4, CONFIG_SYS_OR4_PRELIM);
+	out_be32(&memctl->memc_br4, CONFIG_SYS_BR4_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
+	out_be32(&memctl->memc_or5, CONFIG_SYS_OR5_PRELIM);
+	out_be32(&memctl->memc_br5, CONFIG_SYS_BR5_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
+	out_be32(&memctl->memc_or6, CONFIG_SYS_OR6_PRELIM);
+	out_be32(&memctl->memc_br6, CONFIG_SYS_BR6_PRELIM);
+#endif
+
+#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
+	out_be32(&memctl->memc_or7, CONFIG_SYS_OR7_PRELIM);
+	out_be32(&memctl->memc_br7, CONFIG_SYS_BR7_PRELIM);
+#endif
+
+	/*
+	 * Reset CPM
+	 */
+	out_be16(&immr->im_cpm.cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
+	/* Spin until command processed */
+	while (in_be16(&immr->im_cpm.cp_cpcr) & CPM_CR_FLG)
+		;
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r(void)
+{
+	return 0;
+}
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/fdt.c b/roms/u-boot/arch/powerpc/cpu/mpc8xx/fdt.c
new file mode 100644
index 000000000..b4a26efe3
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/fdt.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2008 (C) Bryan O'Donoghue
+ *
+ * Code copied & edited from Freescale mpc85xx stuff.
+ */
+
+#include <common.h>
+#include <time.h>
+#include <asm/global_data.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_cpu_setup(void *blob, struct bd_info *bd)
+{
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "timebase-frequency", get_tbclk(), 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "clock-frequency", bd->bi_intfreq, 1);
+	do_fixup_by_compat_u32(blob, "fsl,pq1-soc", "clock-frequency",
+			       bd->bi_intfreq, 1);
+	do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
+			       gd->arch.brg_clk, 1);
+
+	fdt_fixup_memory(blob, (u64)gd->ram_base, (u64)gd->ram_size);
+}
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/immap.c b/roms/u-boot/arch/powerpc/cpu/mpc8xx/immap.c
new file mode 100644
index 000000000..40793c26e
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/immap.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+/*
+ * MPC8xx Internal Memory Map Functions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/global_data.h>
+
+#include <asm/immap_8xx.h>
+#include <asm/cpm_8xx.h>
+#include <asm/iopin_8xx.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int do_siuinfo(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	sysconf8xx_t __iomem *sc = &immap->im_siu_conf;
+
+	printf("SIUMCR= %08x SYPCR = %08x\n",
+	       in_be32(&sc->sc_siumcr), in_be32(&sc->sc_sypcr));
+	printf("SWT   = %08x\n", in_be32(&sc->sc_swt));
+	printf("SIPEND= %08x SIMASK= %08x\n",
+	       in_be32(&sc->sc_sipend), in_be32(&sc->sc_simask));
+	printf("SIEL  = %08x SIVEC = %08x\n",
+	       in_be32(&sc->sc_siel), in_be32(&sc->sc_sivec));
+	printf("TESR  = %08x SDCR  = %08x\n",
+	       in_be32(&sc->sc_tesr), in_be32(&sc->sc_sdcr));
+	return 0;
+}
+
+static int do_memcinfo(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	memctl8xx_t __iomem *memctl = &immap->im_memctl;
+	int nbanks = 8;
+	uint __iomem *p = &memctl->memc_br0;
+	int i;
+
+	for (i = 0; i < nbanks; i++, p += 2)
+		printf("BR%-2d  = %08x OR%-2d  = %08x\n",
+		       i, in_be32(p), i, in_be32(p + 1));
+
+	printf("MAR   = %08x", in_be32(&memctl->memc_mar));
+	printf(" MCR   = %08x\n", in_be32(&memctl->memc_mcr));
+	printf("MAMR  = %08x MBMR  = %08x",
+	       in_be32(&memctl->memc_mamr), in_be32(&memctl->memc_mbmr));
+	printf("\nMSTAT =     %04x\n", in_be16(&memctl->memc_mstat));
+	printf("MPTPR =     %04x MDR   = %08x\n",
+	       in_be16(&memctl->memc_mptpr), in_be32(&memctl->memc_mdr));
+	return 0;
+}
+
+static int do_carinfo(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	car8xx_t __iomem *car = &immap->im_clkrst;
+
+	printf("SCCR  = %08x\n", in_be32(&car->car_sccr));
+	printf("PLPRCR= %08x\n", in_be32(&car->car_plprcr));
+	printf("RSR   = %08x\n", in_be32(&car->car_rsr));
+	return 0;
+}
+
+static int counter;
+
+static void header(void)
+{
+	char *data = "\
+       --------------------------------        --------------------------------\
+       00000000001111111111222222222233        00000000001111111111222222222233\
+       01234567890123456789012345678901        01234567890123456789012345678901\
+       --------------------------------        --------------------------------\
+    ";
+	int i;
+
+	if (counter % 2)
+		putc('\n');
+	counter = 0;
+
+	for (i = 0; i < 4; i++, data += 79)
+		printf("%.79s\n", data);
+}
+
+static void binary(char *label, uint value, int nbits)
+{
+	uint mask = 1 << (nbits - 1);
+	int i, second = (counter++ % 2);
+
+	if (second)
+		putc(' ');
+	puts(label);
+	for (i = 32 + 1; i != nbits; i--)
+		putc(' ');
+
+	while (mask != 0) {
+		if (value & mask)
+			putc('1');
+		else
+			putc('0');
+		mask >>= 1;
+	}
+
+	if (second)
+		putc('\n');
+}
+
+#define PA_NBITS	16
+#define PA_NB_ODR	 8
+#define PB_NBITS	18
+#define PB_NB_ODR	16
+#define PC_NBITS	12
+#define PD_NBITS	13
+
+static int do_iopinfo(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	iop8xx_t __iomem *iop = &immap->im_ioport;
+	ushort __iomem *l, *r;
+	uint __iomem *R;
+
+	counter = 0;
+	header();
+
+	/*
+	 * Ports A & B
+	 */
+
+	l = &iop->iop_padir;
+	R = &immap->im_cpm.cp_pbdir;
+	binary("PA_DIR", in_be16(l++), PA_NBITS);
+	binary("PB_DIR", in_be32(R++), PB_NBITS);
+	binary("PA_PAR", in_be16(l++), PA_NBITS);
+	binary("PB_PAR", in_be32(R++), PB_NBITS);
+	binary("PA_ODR", in_be16(l++), PA_NB_ODR);
+	binary("PB_ODR", in_be32(R++), PB_NB_ODR);
+	binary("PA_DAT", in_be16(l++), PA_NBITS);
+	binary("PB_DAT", in_be32(R++), PB_NBITS);
+
+	header();
+
+	/*
+	 * Ports C & D
+	 */
+
+	l = &iop->iop_pcdir;
+	r = &iop->iop_pddir;
+	binary("PC_DIR", in_be16(l++), PC_NBITS);
+	binary("PD_DIR", in_be16(r++), PD_NBITS);
+	binary("PC_PAR", in_be16(l++), PC_NBITS);
+	binary("PD_PAR", in_be16(r++), PD_NBITS);
+	binary("PC_SO ", in_be16(l++), PC_NBITS);
+	binary("      ", 0, 0);
+	r++;
+	binary("PC_DAT", in_be16(l++), PC_NBITS);
+	binary("PD_DAT", in_be16(r++), PD_NBITS);
+	binary("PC_INT", in_be16(l++), PC_NBITS);
+
+	header();
+	return 0;
+}
+
+/*
+ * set the io pins
+ * this needs a clean up for smaller tighter code
+ * use *uint and set the address based on cmd + port
+ */
+static int do_iopset(struct cmd_tbl *cmdtp, int flag, int argc,
+		     char *const argv[])
+{
+	uint rcode = 0;
+	iopin_t iopin;
+	static uint port;
+	static uint pin;
+	static uint value;
+	static enum {
+		DIR,
+		PAR,
+		SOR,
+		ODR,
+		DAT,
+		INT
+	} cmd = DAT;
+
+	if (argc != 5) {
+		puts("iopset PORT PIN CMD VALUE\n");
+		return 1;
+	}
+	port = argv[1][0] - 'A';
+	if (port > 3)
+		port -= 0x20;
+	if (port > 3)
+		rcode = 1;
+	pin = simple_strtol(argv[2], NULL, 10);
+	if (pin > 31)
+		rcode = 1;
+
+
+	switch (argv[3][0]) {
+	case 'd':
+		if (argv[3][1] == 'a')
+			cmd = DAT;
+		else if (argv[3][1] == 'i')
+			cmd = DIR;
+		else
+			rcode = 1;
+		break;
+	case 'p':
+		cmd = PAR;
+		break;
+	case 'o':
+		cmd = ODR;
+		break;
+	case 's':
+		cmd = SOR;
+		break;
+	case 'i':
+		cmd = INT;
+		break;
+	default:
+		printf("iopset: unknown command %s\n", argv[3]);
+		rcode = 1;
+	}
+	if (argv[4][0] == '1')
+		value = 1;
+	else if (argv[4][0] == '0')
+		value = 0;
+	else
+		rcode = 1;
+	if (rcode == 0) {
+		iopin.port = port;
+		iopin.pin = pin;
+		iopin.flag = 0;
+		switch (cmd) {
+		case DIR:
+			if (value)
+				iopin_set_out(&iopin);
+			else
+				iopin_set_in(&iopin);
+			break;
+		case PAR:
+			if (value)
+				iopin_set_ded(&iopin);
+			else
+				iopin_set_gen(&iopin);
+			break;
+		case SOR:
+			if (value)
+				iopin_set_opt2(&iopin);
+			else
+				iopin_set_opt1(&iopin);
+			break;
+		case ODR:
+			if (value)
+				iopin_set_odr(&iopin);
+			else
+				iopin_set_act(&iopin);
+			break;
+		case DAT:
+			if (value)
+				iopin_set_high(&iopin);
+			else
+				iopin_set_low(&iopin);
+			break;
+		case INT:
+			if (value)
+				iopin_set_falledge(&iopin);
+			else
+				iopin_set_anyedge(&iopin);
+			break;
+		}
+	}
+	return rcode;
+}
+
+static void prbrg(int n, uint val)
+{
+	uint extc = (val >> 14) & 3;
+	uint cd = (val & CPM_BRG_CD_MASK) >> 1;
+	uint div16 = (val & CPM_BRG_DIV16) != 0;
+
+	ulong clock = gd->cpu_clk;
+
+	printf("BRG%d:", n);
+
+	if (val & CPM_BRG_RST)
+		puts(" RESET");
+	else
+		puts("      ");
+
+	if (val & CPM_BRG_EN)
+		puts("  ENABLED");
+	else
+		puts(" DISABLED");
+
+	printf(" EXTC=%d", extc);
+
+	if (val & CPM_BRG_ATB)
+		puts(" ATB");
+	else
+		puts("    ");
+
+	printf(" DIVIDER=%4d", cd);
+	if (extc == 0 && cd != 0) {
+		uint baudrate;
+
+		if (div16)
+			baudrate = (clock / 16) / (cd + 1);
+		else
+			baudrate = clock / (cd + 1);
+
+		printf("=%6d bps", baudrate);
+	} else {
+		puts("           ");
+	}
+
+	if (val & CPM_BRG_DIV16)
+		puts(" DIV16");
+	else
+		puts("      ");
+
+	putc('\n');
+}
+
+static int do_brginfo(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	cpm8xx_t __iomem *cp = &immap->im_cpm;
+	uint __iomem *p = &cp->cp_brgc1;
+	int i = 1;
+
+	while (i <= 4)
+		prbrg(i++, in_be32(p++));
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_REGINFO
+void print_reginfo(void)
+{
+	immap_t __iomem     *immap  = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	sit8xx_t __iomem *timers = &immap->im_sit;
+
+	printf("\nSystem Configuration registers\n"
+		"\tIMMR\t0x%08X\n", get_immr());
+	do_siuinfo(NULL, 0, 0, NULL);
+
+	printf("Memory Controller Registers\n");
+	do_memcinfo(NULL, 0, 0, NULL);
+
+	printf("\nSystem Integration Timers\n");
+	printf("\tTBSCR\t0x%04X\tRTCSC\t0x%04X\n",
+	       in_be16(&timers->sit_tbscr), in_be16(&timers->sit_rtcsc));
+	printf("\tPISCR\t0x%04X\n", in_be16(&timers->sit_piscr));
+}
+#endif
+
+/***************************************************/
+
+U_BOOT_CMD(
+	siuinfo,	1,	1,	do_siuinfo,
+	"print System Interface Unit (SIU) registers",
+	""
+);
+
+U_BOOT_CMD(
+	memcinfo,	1,	1,	do_memcinfo,
+	"print Memory Controller registers",
+	""
+);
+
+U_BOOT_CMD(
+	carinfo,	1,	1,	do_carinfo,
+	"print Clocks and Reset registers",
+	""
+);
+
+U_BOOT_CMD(
+	iopinfo,	1,	1,	do_iopinfo,
+	"print I/O Port registers",
+	""
+);
+
+U_BOOT_CMD(
+	iopset,	5,	0,	do_iopset,
+	"set I/O Port registers",
+	"PORT PIN CMD VALUE\nPORT: A-D, PIN: 0-31, CMD: [dat|dir|odr|sor], VALUE: 0|1"
+);
+
+U_BOOT_CMD(
+	brginfo,	1,	1,	do_brginfo,
+	"print Baud Rate Generator (BRG) registers",
+	""
+);
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/interrupts.c b/roms/u-boot/arch/powerpc/cpu/mpc8xx/interrupts.c
new file mode 100644
index 000000000..eef1951f2
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/interrupts.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#include <common.h>
+#include <irq_func.h>
+#include <mpc8xx.h>
+#include <mpc8xx_irq.h>
+#include <time.h>
+#include <asm/cpm_8xx.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ptrace.h>
+
+/************************************************************************/
+
+/*
+ * CPM interrupt vector functions.
+ */
+struct interrupt_action {
+	interrupt_handler_t *handler;
+	void *arg;
+};
+
+static struct interrupt_action cpm_vecs[CPMVEC_NR];
+static struct interrupt_action irq_vecs[NR_IRQS];
+
+static void cpm_interrupt_init(void);
+static void cpm_interrupt(void *regs);
+
+/************************************************************************/
+
+void interrupt_init_cpu(unsigned *decrementer_count)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+	*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
+
+	/* disable all interrupts */
+	out_be32(&immr->im_siu_conf.sc_simask, 0);
+
+	/* Configure CPM interrupts */
+	cpm_interrupt_init();
+}
+
+/************************************************************************/
+
+/*
+ * Handle external interrupts
+ */
+void external_interrupt(struct pt_regs *regs)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	int irq;
+	ulong simask;
+	ulong vec, v_bit;
+
+	/*
+	 * read the SIVEC register and shift the bits down
+	 * to get the irq number
+	 */
+	vec = in_be32(&immr->im_siu_conf.sc_sivec);
+	irq = vec >> 26;
+	v_bit = 0x80000000UL >> irq;
+
+	/*
+	 * Read Interrupt Mask Register and Mask Interrupts
+	 */
+	simask = in_be32(&immr->im_siu_conf.sc_simask);
+	clrbits_be32(&immr->im_siu_conf.sc_simask, 0xFFFF0000 >> irq);
+
+	if (!(irq & 0x1)) {		/* External Interrupt ?     */
+		ulong siel;
+
+		/*
+		 * Read Interrupt Edge/Level Register
+		 */
+		siel = in_be32(&immr->im_siu_conf.sc_siel);
+
+		if (siel & v_bit) {	/* edge triggered interrupt ?   */
+			/*
+			 * Rewrite SIPEND Register to clear interrupt
+			 */
+			out_be32(&immr->im_siu_conf.sc_sipend, v_bit);
+		}
+	}
+
+	if (irq_vecs[irq].handler != NULL) {
+		irq_vecs[irq].handler(irq_vecs[irq].arg);
+	} else {
+		printf("\nBogus External Interrupt IRQ %d Vector %ld\n",
+		       irq, vec);
+		/* turn off the bogus interrupt to avoid it from now */
+		simask &= ~v_bit;
+	}
+	/*
+	 * Re-Enable old Interrupt Mask
+	 */
+	out_be32(&immr->im_siu_conf.sc_simask, simask);
+}
+
+/************************************************************************/
+
+/*
+ * CPM interrupt handler
+ */
+static void cpm_interrupt(void *regs)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	uint vec;
+
+	/*
+	 * Get the vector by setting the ACK bit
+	 * and then reading the register.
+	 */
+	out_be16(&immr->im_cpic.cpic_civr, 1);
+	vec = in_be16(&immr->im_cpic.cpic_civr);
+	vec >>= 11;
+
+	if (cpm_vecs[vec].handler != NULL) {
+		(*cpm_vecs[vec].handler) (cpm_vecs[vec].arg);
+	} else {
+		clrbits_be32(&immr->im_cpic.cpic_cimr, 1 << vec);
+		printf("Masking bogus CPM interrupt vector 0x%x\n", vec);
+	}
+	/*
+	 * After servicing the interrupt,
+	 * we have to remove the status indicator.
+	 */
+	setbits_be32(&immr->im_cpic.cpic_cisr, 1 << vec);
+}
+
+/*
+ * The CPM can generate the error interrupt when there is a race
+ * condition between generating and masking interrupts. All we have
+ * to do is ACK it and return. This is a no-op function so we don't
+ * need any special tests in the interrupt handler.
+ */
+static void cpm_error_interrupt(void *dummy)
+{
+}
+
+/************************************************************************/
+/*
+ * Install and free an interrupt handler
+ */
+void irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+	if ((vec & CPMVEC_OFFSET) != 0) {
+		/* CPM interrupt */
+		vec &= 0xffff;
+		if (cpm_vecs[vec].handler != NULL)
+			printf("CPM interrupt 0x%x replacing 0x%x\n",
+			       (uint)handler, (uint)cpm_vecs[vec].handler);
+		cpm_vecs[vec].handler = handler;
+		cpm_vecs[vec].arg = arg;
+		setbits_be32(&immr->im_cpic.cpic_cimr, 1 << vec);
+	} else {
+		/* SIU interrupt */
+		if (irq_vecs[vec].handler != NULL)
+			printf("SIU interrupt %d 0x%x replacing 0x%x\n",
+			       vec, (uint)handler, (uint)cpm_vecs[vec].handler);
+		irq_vecs[vec].handler = handler;
+		irq_vecs[vec].arg = arg;
+		setbits_be32(&immr->im_siu_conf.sc_simask, 1 << (31 - vec));
+	}
+}
+
+void irq_free_handler(int vec)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+	if ((vec & CPMVEC_OFFSET) != 0) {
+		/* CPM interrupt */
+		vec &= 0xffff;
+		clrbits_be32(&immr->im_cpic.cpic_cimr, 1 << vec);
+		cpm_vecs[vec].handler = NULL;
+		cpm_vecs[vec].arg = NULL;
+	} else {
+		/* SIU interrupt */
+		clrbits_be32(&immr->im_siu_conf.sc_simask, 1 << (31 - vec));
+		irq_vecs[vec].handler = NULL;
+		irq_vecs[vec].arg = NULL;
+	}
+}
+
+/************************************************************************/
+
+static void cpm_interrupt_init(void)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	uint cicr;
+
+	/*
+	 * Initialize the CPM interrupt controller.
+	 */
+
+	cicr = CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1 |
+	       ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK;
+
+	out_be32(&immr->im_cpic.cpic_cicr, cicr);
+	out_be32(&immr->im_cpic.cpic_cimr, 0);
+
+	/*
+	 * Install the error handler.
+	 */
+	irq_install_handler(CPMVEC_ERROR, cpm_error_interrupt, NULL);
+
+	setbits_be32(&immr->im_cpic.cpic_cicr, CICR_IEN);
+
+	/*
+	 * Install the cpm interrupt handler
+	 */
+	irq_install_handler(CPM_INTERRUPT, cpm_interrupt, NULL);
+}
+
+/************************************************************************/
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ * Trivial implementation - no need to be really accurate.
+ */
+void timer_interrupt_cpu(struct pt_regs *regs)
+{
+	immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+
+	/* Reset Timer Expired and Timers Interrupt Status */
+	out_be32(&immr->im_clkrstk.cark_plprcrk, KAPWR_KEY);
+	__asm__ ("nop");
+	/*
+	  Clear TEXPS (and TMIST on older chips). SPLSS (on older
+	  chips) is cleared too.
+
+	  Bitwise OR is a read-modify-write operation so ALL bits
+	  which are cleared by writing `1' would be cleared by
+	  operations like
+
+	  immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
+
+	  The same can be achieved by simple writing of the PLPRCR
+	  to itself. If a bit value should be preserved, read the
+	  register, ZERO the bit and write, not OR, the result back.
+	*/
+	setbits_be32(&immr->im_clkrst.car_plprcr, 0);
+}
+
+/************************************************************************/
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/speed.c b/roms/u-boot/arch/powerpc/cpu/mpc8xx/speed.c
new file mode 100644
index 000000000..ad3d3f910
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/speed.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+#include <common.h>
+#include <clock_legacy.h>
+#include <mpc8xx.h>
+#include <asm/global_data.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
+ */
+int get_clocks(void)
+{
+	immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+	uint sccr = in_be32(&immap->im_clkrst.car_sccr);
+	uint divider = 1 << (((sccr & SCCR_DFBRG11) >> 11) * 2);
+
+	/*
+	 * If for some reason measuring the gclk frequency won't
+	 * work, we return the hardwired value.
+	 * (For example, the cogent CMA286-60 CPU module has no
+	 * separate oscillator for PITRTCLK)
+	 */
+	gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
+
+	if ((sccr & SCCR_EBDF11) == 0) {
+		/* No Bus Divider active */
+		gd->bus_clk = gd->cpu_clk;
+	} else {
+		/* The MPC8xx has only one BDF: half clock speed */
+		gd->bus_clk = gd->cpu_clk / 2;
+	}
+
+	gd->arch.brg_clk = gd->cpu_clk / divider;
+
+	return 0;
+}
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/start.S b/roms/u-boot/arch/powerpc/cpu/mpc8xx/start.S
new file mode 100644
index 000000000..ed735cdee
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/start.S
@@ -0,0 +1,542 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ */
+
+/*  U-Boot - Startup Code for PowerPC based Embedded Boards
+ *
+ *
+ *  The processor starts at 0x00000100 and the code is executed
+ *  from flash. The code is organized to be at an other address
+ *  in memory, but as long we don't jump around before relocating,
+ *  board_init lies at a quite high address and when the cpu has
+ *  jumped there, everything is ok.
+ *  This works because the cpu gives the FLASH (CS0) the whole
+ *  address space at startup, and board_init lies as a echo of
+ *  the flash somewhere up there in the memory map.
+ *
+ *  board_init will change CS0 to be positioned at the correct
+ *  address and (s)dram will be positioned at address 0
+ */
+#include <asm-offsets.h>
+#include <config.h>
+#include <mpc8xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <asm/u-boot.h>
+
+/* We don't want the  MMU yet.
+*/
+#undef	MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME | MSR_RI )	/* Machine Check and Recoverable Interr. */
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+	START_GOT
+	GOT_ENTRY(_GOT2_TABLE_)
+	GOT_ENTRY(_FIXUP_TABLE_)
+
+	GOT_ENTRY(_start)
+	GOT_ENTRY(_start_of_vectors)
+	GOT_ENTRY(_end_of_vectors)
+	GOT_ENTRY(transfer_to_handler)
+
+	GOT_ENTRY(__init_end)
+	GOT_ENTRY(__bss_end)
+	GOT_ENTRY(__bss_start)
+	END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+	.text
+	.long	0x27051956		/* U-Boot Magic Number			*/
+	.globl	version_string
+version_string:
+	.ascii U_BOOT_VERSION_STRING, "\0"
+
+	. = EXC_OFF_SYS_RESET
+	.globl	_start
+_start:
+	lis	r3, CONFIG_SYS_IMMR@h		/* position IMMR */
+	mtspr	638, r3
+
+	/* Initialize machine status; enable machine check interrupt		*/
+	/*----------------------------------------------------------------------*/
+	li	r3, MSR_KERNEL		/* Set ME, RI flags */
+	mtmsr	r3
+	mtspr	SRR1, r3		/* Make SRR1 match MSR */
+
+	mfspr	r3, ICR			/* clear Interrupt Cause Register */
+
+	/* Initialize debug port registers					*/
+	/*----------------------------------------------------------------------*/
+	xor	r0, r0, r0		/* Clear R0 */
+	mtspr	LCTRL1, r0		/* Initialize debug port regs */
+	mtspr	LCTRL2, r0
+	mtspr	COUNTA, r0
+	mtspr	COUNTB, r0
+
+	/* Reset the caches							*/
+	/*----------------------------------------------------------------------*/
+
+	mfspr	r3, IC_CST		/* Clear error bits */
+	mfspr	r3, DC_CST
+
+	lis	r3, IDC_UNALL@h		/* Unlock all */
+	mtspr	IC_CST, r3
+	mtspr	DC_CST, r3
+
+	lis	r3, IDC_INVALL@h	/* Invalidate all */
+	mtspr	IC_CST, r3
+	mtspr	DC_CST, r3
+
+	lis	r3, IDC_DISABLE@h	/* Disable data cache */
+	mtspr	DC_CST, r3
+
+	lis	r3, IDC_ENABLE@h	/* Enable instruction cache */
+	mtspr	IC_CST, r3
+
+	/* invalidate all tlb's							*/
+	/*----------------------------------------------------------------------*/
+
+	tlbia
+	isync
+
+	/*
+	 * Calculate absolute address in FLASH and jump there
+	 *----------------------------------------------------------------------*/
+
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
+	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+	mtlr	r3
+	blr
+
+in_flash:
+
+	/* initialize some SPRs that are hard to access from C			*/
+	/*----------------------------------------------------------------------*/
+
+	/*
+	 * Disable serialized ifetch and show cycles
+	 * (i.e. set processor to normal mode).
+	 * This is also a silicon bug workaround, see errata
+	 */
+
+	li	r2, 0x0007
+	mtspr	ICTRL, r2
+
+	/* Set up debug mode entry */
+
+	lis	r2, CONFIG_SYS_DER@h
+	ori	r2, r2, CONFIG_SYS_DER@l
+	mtspr	DER, r2
+
+	/* set up the stack on top of internal DPRAM */
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)@l
+	stw	r0, -4(r3)
+	stw	r0, -8(r3)
+	addi	r1, r3, -8
+
+	bl	board_init_f_alloc_reserve
+	addi	r1, r3, -8
+
+	/* Zeroise the CPM dpram */
+	lis	r4, CONFIG_SYS_IMMR@h
+	ori	r4, r4, (0x2000 - 4)
+	li	r0, (0x2000 / 4)
+	mtctr	r0
+	li	r0, 0
+1:	stwu	r0, 4(r4)
+	bdnz	1b
+
+	bl	board_init_f_init_reserve
+
+	/* let the C-code set up the rest					*/
+	/*									*/
+	/* Be careful to keep code relocatable !				*/
+	/*----------------------------------------------------------------------*/
+
+	GET_GOT			/* initialize GOT access			*/
+
+	lis	r3, CONFIG_SYS_IMMR@h
+	bl	cpu_init_f	/* run low-level CPU init code     (from Flash)	*/
+
+	bl	board_init_f	/* run 1st part of board init code (from Flash) */
+
+	/* NOTREACHED - board_init_f() does not return */
+
+
+	.globl	_start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception.  "Never" generated on the 860. */
+	STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception.  "Never" generated on the 860. */
+	STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG(SRR0, SRR1)
+	mfspr	r4,DAR
+	stw	r4,_DAR(r21)
+	mfspr	r5,DSISR
+	stw	r5,_DSISR(r21)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+	. = 0x700
+ProgramCheck:
+	EXCEPTION_PROLOG(SRR0, SRR1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+		MSR_KERNEL, COPY_EE)
+
+	/* No FPU on MPC8xx.  This exception is not supposed to happen.
+	*/
+	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+	/* I guess we could implement decrementer, and may have
+	 * to someday for timekeeping.
+	 */
+	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+	/* On the MPC8xx, this is a software emulation interrupt.  It occurs
+	 * for all unimplemented and illegal instructions.
+	 */
+	STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+
+	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+	STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+
+	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+	STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+	STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+	STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+	STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+	STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+	STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+
+	STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
+	STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+
+	.globl	_end_of_vectors
+_end_of_vectors:
+
+
+	. = 0x2000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+	.globl	transfer_to_handler
+transfer_to_handler:
+	stw	r22,_NIP(r21)
+	lis	r22,MSR_POW@h
+	andc	r23,r23,r22
+	stw	r23,_MSR(r21)
+	SAVE_GPR(7, r21)
+	SAVE_4GPRS(8, r21)
+	SAVE_8GPRS(12, r21)
+	SAVE_8GPRS(24, r21)
+	mflr	r23
+	andi.	r24,r23,0x3f00		/* get vector offset */
+	stw	r24,TRAP(r21)
+	li	r22,0
+	stw	r22,RESULT(r21)
+	mtspr	SPRG2,r22		/* r1 is now kernel sp */
+	lwz	r24,0(r23)		/* virtual address of handler */
+	lwz	r23,4(r23)		/* where to go when done */
+	mtspr	SRR0,r24
+	mtspr	SRR1,r20
+	mtlr	r23
+	SYNC
+	rfi				/* jump to handler, enable MMU */
+
+int_return:
+	mfmsr	r28			/* Disable interrupts */
+	li	r4,0
+	ori	r4,r4,MSR_EE
+	andc	r28,r28,r4
+	SYNC				/* Some chip revs need this... */
+	mtmsr	r28
+	SYNC
+	lwz	r2,_CTR(r1)
+	lwz	r0,_LINK(r1)
+	mtctr	r2
+	mtlr	r0
+	lwz	r2,_XER(r1)
+	lwz	r0,_CCR(r1)
+	mtspr	XER,r2
+	mtcrf	0xFF,r0
+	REST_10GPRS(3, r1)
+	REST_10GPRS(13, r1)
+	REST_8GPRS(23, r1)
+	REST_GPR(31, r1)
+	lwz	r2,_NIP(r1)		/* Restore environment */
+	lwz	r0,_MSR(r1)
+	mtspr	SRR0,r2
+	mtspr	SRR1,r0
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	lwz	r1,GPR1(r1)
+	SYNC
+	rfi
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code(addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+	.globl	relocate_code
+relocate_code:
+	mr	r1,  r3		/* Set new stack pointer		*/
+	mr	r9,  r4		/* Save copy of Global Data pointer	*/
+	mr	r10, r5		/* Save copy of Destination Address	*/
+
+	GET_GOT
+	mr	r3,  r5				/* Destination Address	*/
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
+	lwz	r5, GOT(__init_end)
+	sub	r5, r5, r4
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
+
+	/*
+	 * Fix GOT pointer:
+	 *
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+	 *
+	 * Offset:
+	 */
+	sub	r15, r10, r4
+
+	/* First our own GOT */
+	add	r12, r12, r15
+	/* then the one used by the C code */
+	add	r30, r30, r15
+
+	/*
+	 * Now relocate code
+	 */
+
+	cmplw	cr1,r3,r4
+	addi	r0,r5,3
+	srwi.	r0,r0,2
+	beq	cr1,4f		/* In place copy is not necessary	*/
+	beq	7f		/* Protect against 0 count		*/
+	mtctr	r0
+	bge	cr1,2f
+
+	la	r8,-4(r4)
+	la	r7,-4(r3)
+1:	lwzu	r0,4(r8)
+	stwu	r0,4(r7)
+	bdnz	1b
+	b	4f
+
+2:	slwi	r0,r0,2
+	add	r8,r4,r0
+	add	r7,r3,r0
+3:	lwzu	r0,-4(r8)
+	stwu	r0,-4(r7)
+	bdnz	3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4:	cmpwi	r6,0
+	add	r5,r3,r5
+	beq	7f		/* Always flush prefetch queue in any case */
+	subi	r0,r6,1
+	andc	r3,r3,r0
+	mr	r4,r3
+5:	dcbst	0,r4
+	add	r4,r4,r6
+	cmplw	r4,r5
+	blt	5b
+	sync			/* Wait for all dcbst to complete on bus */
+	mr	r4,r3
+6:	icbi	0,r4
+	add	r4,r4,r6
+	cmplw	r4,r5
+	blt	6b
+7:	sync			/* Wait for all icbi to complete on bus	*/
+	isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+	mtlr	r0
+	blr
+
+in_ram:
+
+	/*
+	 * Relocation Function, r12 point to got2+0x8000
+	 *
+	 * Adjust got2 pointers, no need to check for 0, this code
+	 * already puts a few entries in the table.
+	 */
+	li	r0,__got2_entries@sectoff@l
+	la	r3,GOT(_GOT2_TABLE_)
+	lwz	r11,GOT(_GOT2_TABLE_)
+	mtctr	r0
+	sub	r11,r3,r11
+	addi	r3,r3,-4
+1:	lwzu	r0,4(r3)
+	cmpwi	r0,0
+	beq-	2f
+	add	r0,r0,r11
+	stw	r0,0(r3)
+2:	bdnz	1b
+
+	/*
+	 * Now adjust the fixups and the pointers to the fixups
+	 * in case we need to move ourselves again.
+	 */
+	li	r0,__fixup_entries@sectoff@l
+	lwz	r3,GOT(_FIXUP_TABLE_)
+	cmpwi	r0,0
+	mtctr	r0
+	addi	r3,r3,-4
+	beq	4f
+3:	lwzu	r4,4(r3)
+	lwzux	r0,r4,r11
+	cmpwi	r0,0
+	add	r0,r0,r11
+	stw	r4,0(r3)
+	beq-	5f
+	stw	r0,0(r4)
+5:	bdnz	3b
+4:
+clear_bss:
+	/*
+	 * Now clear BSS segment
+	 */
+	lwz	r3,GOT(__bss_start)
+	lwz	r4,GOT(__bss_end)
+
+	cmplw	0, r3, r4
+	beq	6f
+
+	li	r0, 0
+5:
+	stw	r0, 0(r3)
+	addi	r3, r3, 4
+	cmplw	0, r3, r4
+	bne	5b
+6:
+
+	mr	r3, r9		/* Global Data pointer		*/
+	mr	r4, r10		/* Destination Address		*/
+	bl	board_init_r
+
+	/*
+	 * Copy exception vector code to low memory
+	 *
+	 * r3: dest_addr
+	 * r7: source address, r8: end address, r9: target address
+	 */
+	.globl	trap_init
+trap_init:
+	mflr	r4			/* save link register		*/
+	GET_GOT
+	lwz	r7, GOT(_start)
+	lwz	r8, GOT(_end_of_vectors)
+
+	li	r9, 0x100		/* reset vector always at 0x100 */
+
+	cmplw	0, r7, r8
+	bgelr				/* return if r7>=r8 - just in case */
+1:
+	lwz	r0, 0(r7)
+	stw	r0, 0(r9)
+	addi	r7, r7, 4
+	addi	r9, r9, 4
+	cmplw	0, r7, r8
+	bne	1b
+
+	/*
+	 * relocate `hdlr' and `int_return' entries
+	 */
+	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	2b
+
+	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+	bl	trap_reloc
+
+	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+	bl	trap_reloc
+
+	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	3b
+
+	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	4b
+
+	mtlr	r4			/* restore link register	*/
+	blr
diff --git a/roms/u-boot/arch/powerpc/cpu/mpc8xx/traps.c b/roms/u-boot/arch/powerpc/cpu/mpc8xx/traps.c
new file mode 100644
index 000000000..56794b08a
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/mpc8xx/traps.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <asm/ptrace.h>
+#include <command.h>
+#include <asm/processor.h>
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM	0x02000000
+
+/*
+ * Trap & Exception support
+ */
+
+static void print_backtrace(unsigned long *sp)
+{
+	int cnt = 0;
+	unsigned long i;
+
+	printf("Call backtrace: ");
+	while (sp) {
+		if ((uint)sp > END_OF_MEM)
+			break;
+
+		i = sp[1];
+		if (cnt++ % 7 == 0)
+			printf("\n");
+		printf("%08lX ", i);
+		if (cnt > 32)
+			break;
+		sp = (unsigned long *)*sp;
+	}
+	printf("\n");
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	int i;
+
+	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+	       regs->msr, regs->msr & MSR_EE ? 1 : 0,
+	       regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0,
+	       regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0,
+	       regs->msr & MSR_DR ? 1 : 0);
+
+	printf("\n");
+	for (i = 0;  i < 32;  i++) {
+		if ((i % 8) == 0)
+			printf("GPR%02d: ", i);
+
+		printf("%08lX ", regs->gpr[i]);
+		if ((i % 8) == 7)
+			printf("\n");
+	}
+}
+
+
+static void _exception(int signr, struct pt_regs *regs)
+{
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
+}
+
+void MachineCheckException(struct pt_regs *regs)
+{
+	unsigned long fixup = search_exception_table(regs->nip);
+
+	/* Probing PCI using config cycles cause this exception
+	 * when a device is not present.  Catch it and return to
+	 * the PCI exception handler.
+	 */
+	if (fixup != 0) {
+		regs->nip = fixup;
+		return;
+	}
+
+	printf("Machine check in kernel mode.\n");
+	printf("Caused by (from msr): ");
+	printf("regs %p ", regs);
+	switch (regs->msr & 0x000F0000) {
+	case (0x80000000 >> 12):
+		printf("Machine check signal - probably due to mm fault\n"
+			"with mmu off\n");
+		break;
+	case (0x80000000 >> 13):
+		printf("Transfer error ack signal\n");
+		break;
+	case (0x80000000 >> 14):
+		printf("Data parity signal\n");
+		break;
+	case (0x80000000 >> 15):
+		printf("Address parity signal\n");
+		break;
+	default:
+		printf("Unknown values in msr\n");
+	}
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("machine check");
+}
+
+void AlignmentException(struct pt_regs *regs)
+{
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Alignment Exception");
+}
+
+void ProgramCheckException(struct pt_regs *regs)
+{
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Program Check Exception");
+}
+
+void SoftEmuException(struct pt_regs *regs)
+{
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Software Emulation Exception");
+}
+
+
+void UnknownException(struct pt_regs *regs)
+{
+	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+	       regs->nip, regs->msr, regs->trap);
+	_exception(0, regs);
+}
+
+void DebugException(struct pt_regs *regs)
+{
+	printf("Debugger trap at @ %lx\n", regs->nip);
+	show_regs(regs);
+}