Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

12 files changed, 1108 insertions, 0 deletions

diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/global_nvs.asl b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/global_nvs.asl
new file mode 100644
index 000000000..61602173f
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/global_nvs.asl
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <asm/acpi/global_nvs.h>
+
+OperationRegion(GNVS, SystemMemory, ACPI_GNVS_ADDR, ACPI_GNVS_SIZE)
+Field(GNVS, ByteAcc, NoLock, Preserve)
+{
+	PCNT, 8,	/* processor count */
+}
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/irqroute.h b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/irqroute.h
new file mode 100644
index 000000000..879b67d8c
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/irqroute.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <asm/arch/device.h>
+
+#define PCI_DEV_PIRQ_ROUTES \
+	PCI_DEV_PIRQ_ROUTE(QUARK_DEV_20, E, F, G, H), \
+	PCI_DEV_PIRQ_ROUTE(QUARK_DEV_21, E, F, G, H), \
+	PCI_DEV_PIRQ_ROUTE(QUARK_DEV_23, A, B, C, D)
+
+#define PCIE_BRIDGE_IRQ_ROUTES \
+	PCIE_BRIDGE_DEV(RP, QUARK_DEV_23, A, B, C, D)
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/lpc.asl b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/lpc.asl
new file mode 100644
index 000000000..fc30e0ab7
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/lpc.asl
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+/* Intel LPC Bus Device - 0:1f.0 */
+
+Device (LPCB)
+{
+	Name(_ADR, 0x001f0000)
+
+	OperationRegion(PRTX, PCI_Config, 0x60, 8)
+	Field(PRTX, AnyAcc, NoLock, Preserve) {
+		PRTA, 8,
+		PRTB, 8,
+		PRTC, 8,
+		PRTD, 8,
+		PRTE, 8,
+		PRTF, 8,
+		PRTG, 8,
+		PRTH, 8,
+	}
+
+	#include <asm/acpi/irqlinks.asl>
+
+	/* Firmware Hub */
+	Device (FWH)
+	{
+		Name(_HID, EISAID("INT0800"))
+		Name(_CRS, ResourceTemplate()
+		{
+			Memory32Fixed(ReadOnly, 0xff000000, 0x01000000)
+		})
+	}
+
+	/* 8259 Interrupt Controller */
+	Device (PIC)
+	{
+		Name(_HID, EISAID("PNP0000"))
+		Name(_CRS, ResourceTemplate()
+		{
+			IO(Decode16, 0x20, 0x20, 0x01, 0x02)
+			IO(Decode16, 0x24, 0x24, 0x01, 0x02)
+			IO(Decode16, 0x28, 0x28, 0x01, 0x02)
+			IO(Decode16, 0x2c, 0x2c, 0x01, 0x02)
+			IO(Decode16, 0x30, 0x30, 0x01, 0x02)
+			IO(Decode16, 0x34, 0x34, 0x01, 0x02)
+			IO(Decode16, 0x38, 0x38, 0x01, 0x02)
+			IO(Decode16, 0x3c, 0x3c, 0x01, 0x02)
+			IO(Decode16, 0xa0, 0xa0, 0x01, 0x02)
+			IO(Decode16, 0xa4, 0xa4, 0x01, 0x02)
+			IO(Decode16, 0xa8, 0xa8, 0x01, 0x02)
+			IO(Decode16, 0xac, 0xac, 0x01, 0x02)
+			IO(Decode16, 0xb0, 0xb0, 0x01, 0x02)
+			IO(Decode16, 0xb4, 0xb4, 0x01, 0x02)
+			IO(Decode16, 0xb8, 0xb8, 0x01, 0x02)
+			IO(Decode16, 0xbc, 0xbc, 0x01, 0x02)
+			IO(Decode16, 0x4d0, 0x4d0, 0x01, 0x02)
+			IRQNoFlags () { 2 }
+		})
+	}
+
+	/* 8254 timer */
+	Device (TIMR)
+	{
+		Name(_HID, EISAID("PNP0100"))
+		Name(_CRS, ResourceTemplate()
+		{
+			IO(Decode16, 0x40, 0x40, 0x01, 0x04)
+			IO(Decode16, 0x50, 0x50, 0x10, 0x04)
+			IRQNoFlags() { 0 }
+		})
+	}
+
+	/* HPET */
+	Device (HPET)
+	{
+		Name(_HID, EISAID("PNP0103"))
+		Name(_CID, 0x010CD041)
+		Name(_CRS, ResourceTemplate()
+		{
+			Memory32Fixed(ReadOnly, HPET_BASE_ADDRESS, HPET_BASE_SIZE)
+		})
+
+		Method(_STA)
+		{
+			Return (STA_VISIBLE)
+		}
+	}
+
+	/* Real Time Clock */
+	Device (RTC)
+	{
+		Name(_HID, EISAID("PNP0B00"))
+		Name(_CRS, ResourceTemplate()
+		{
+			IO(Decode16, 0x70, 0x70, 1, 8)
+			IRQNoFlags() { 8 }
+		})
+	}
+
+	/* LPC device: Resource consumption */
+	Device (LDRC)
+	{
+		Name(_HID, EISAID("PNP0C02"))
+		Name(_UID, 2)
+
+		Name(RBUF, ResourceTemplate()
+		{
+			IO(Decode16, 0x61, 0x61, 0x1, 0x01) /* NMI Status */
+			IO(Decode16, 0x63, 0x63, 0x1, 0x01) /* CPU Reserved */
+			IO(Decode16, 0x65, 0x65, 0x1, 0x01) /* CPU Reserved */
+			IO(Decode16, 0x67, 0x67, 0x1, 0x01) /* CPU Reserved */
+			IO(Decode16, 0x80, 0x80, 0x1, 0x01) /* Port 80 Post */
+			IO(Decode16, 0x92, 0x92, 0x1, 0x01) /* CPU Reserved */
+			IO(Decode16, 0xb2, 0xb2, 0x1, 0x02) /* SWSMI */
+		})
+
+		Method(_CRS, 0, NotSerialized)
+		{
+			Return (RBUF)
+		}
+	}
+}
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/platform.asl b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/platform.asl
new file mode 100644
index 000000000..5b3e4a533
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/platform.asl
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <asm/acpi/statdef.asl>
+#include <asm/arch/iomap.h>
+#include <asm/arch/irq.h>
+
+/*
+ * The _PTS method (Prepare To Sleep) is called before the OS is
+ * entering a sleep state. The sleep state number is passed in Arg0.
+ */
+Method(_PTS, 1)
+{
+}
+
+/* The _WAK method is called on system wakeup */
+Method(_WAK, 1)
+{
+	Return (Package() {0, 0})
+}
+
+/* ACPI global NVS */
+#include "global_nvs.asl"
+
+/* TODO: add CPU ASL support */
+
+Scope (\_SB)
+{
+	#include "southcluster.asl"
+}
+
+/* Chipset specific sleep states */
+#include <asm/acpi/sleepstates.asl>
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/southcluster.asl b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/southcluster.asl
new file mode 100644
index 000000000..384dab25b
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/acpi/southcluster.asl
@@ -0,0 +1,183 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+Device (PCI0)
+{
+	Name(_HID, EISAID("PNP0A08"))	/* PCIe */
+	Name(_CID, EISAID("PNP0A03"))	/* PCI */
+
+	Name(_UID, 0)
+	Name(_BBN, 0)
+
+	Name(MCRS, ResourceTemplate()
+	{
+		/* Bus Numbers */
+		WordBusNumber(ResourceProducer, MinFixed, MaxFixed, PosDecode,
+				0x0000, 0x0000, 0x00ff, 0x0000, 0x0100, , , PB00)
+
+		/* IO Region 0 */
+		WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+				0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8, , , PI00)
+
+		/* PCI Config Space */
+		IO(Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008)
+
+		/* IO Region 1 */
+		WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+				0x0000, 0x0d00, 0xffff, 0x0000, 0xf300, , , PI01)
+
+		/* VGA memory (0xa0000-0xbffff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000a0000, 0x000bffff, 0x00000000,
+				0x00020000, , , ASEG)
+
+		/* OPROM reserved (0xc0000-0xc3fff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000c0000, 0x000c3fff, 0x00000000,
+				0x00004000, , , OPR0)
+
+		/* OPROM reserved (0xc4000-0xc7fff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000c4000, 0x000c7fff, 0x00000000,
+				0x00004000, , , OPR1)
+
+		/* OPROM reserved (0xc8000-0xcbfff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000c8000, 0x000cbfff, 0x00000000,
+				0x00004000, , , OPR2)
+
+		/* OPROM reserved (0xcc000-0xcffff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000cc000, 0x000cffff, 0x00000000,
+				0x00004000, , , OPR3)
+
+		/* OPROM reserved (0xd0000-0xd3fff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000d0000, 0x000d3fff, 0x00000000,
+				0x00004000, , , OPR4)
+
+		/* OPROM reserved (0xd4000-0xd7fff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000d4000, 0x000d7fff, 0x00000000,
+				0x00004000, , , OPR5)
+
+		/* OPROM reserved (0xd8000-0xdbfff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000d8000, 0x000dbfff, 0x00000000,
+				0x00004000, , , OPR6)
+
+		/* OPROM reserved (0xdc000-0xdffff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000dc000, 0x000dffff, 0x00000000,
+				0x00004000, , , OPR7)
+
+		/* BIOS Extension (0xe0000-0xe3fff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000e0000, 0x000e3fff, 0x00000000,
+				0x00004000, , , ESG0)
+
+		/* BIOS Extension (0xe4000-0xe7fff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000e4000, 0x000e7fff, 0x00000000,
+				0x00004000, , , ESG1)
+
+		/* BIOS Extension (0xe8000-0xebfff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000e8000, 0x000ebfff, 0x00000000,
+				0x00004000, , , ESG2)
+
+		/* BIOS Extension (0xec000-0xeffff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000ec000, 0x000effff, 0x00000000,
+				0x00004000, , , ESG3)
+
+		/* System BIOS (0xf0000-0xfffff) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x000f0000, 0x000fffff, 0x00000000,
+				0x00010000, , , FSEG)
+
+		/* PCI Memory Region (TOLM-CONFIG_MMCONF_BASE_ADDRESS) */
+		DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed,
+				Cacheable, ReadWrite,
+				0x00000000, 0x00000000, 0x00000000, 0x00000000,
+				0x00000000, , , PMEM)
+	})
+
+	Method(_CRS, 0, Serialized)
+	{
+		/* Update PCI resource area */
+		CreateDwordField(MCRS, ^PMEM._MIN, PMIN)
+		CreateDwordField(MCRS, ^PMEM._MAX, PMAX)
+		CreateDwordField(MCRS, ^PMEM._LEN, PLEN)
+
+		/*
+		 * Hardcode TOLM to 2GB for now (see DRAM_MAX_SIZE in quark.h)
+		 *
+		 * TODO: for generic usage, read TOLM value from register, or
+		 * from global NVS (not implemented by U-Boot yet).
+		 */
+		Store(0x80000000, PMIN)
+		Store(Subtract(MCFG_BASE_ADDRESS, 1), PMAX)
+		Add(Subtract(PMAX, PMIN), 1, PLEN)
+
+		Return (MCRS)
+	}
+
+	/* Device Resource Consumption */
+	Device (PDRC)
+	{
+		Name(_HID, EISAID("PNP0C02"))
+		Name(_UID, 1)
+
+		Name(PDRS, ResourceTemplate() {
+			Memory32Fixed(ReadWrite, CONFIG_ESRAM_BASE, 0x80000)
+			Memory32Fixed(ReadWrite, MCFG_BASE_ADDRESS, MCFG_BASE_SIZE)
+			Memory32Fixed(ReadWrite, RCBA_BASE_ADDRESS, RCBA_BASE_SIZE)
+			IO(Decode16, SPI_DMA_BASE_ADDRESS, SPI_DMA_BASE_ADDRESS, 0x0010, SPI_DMA_BASE_SIZE)
+			IO(Decode16, GPIO_BASE_ADDRESS, GPIO_BASE_ADDRESS, 0x0080, GPIO_BASE_SIZE)
+			IO(Decode16, WDT_BASE_ADDRESS, WDT_BASE_ADDRESS, 0x0040, WDT_BASE_SIZE)
+		})
+
+		/* Current Resource Settings */
+		Method(_CRS, 0, Serialized)
+		{
+			Return (PDRS)
+		}
+	}
+
+	Method(_OSC, 4)
+	{
+		/* Check for proper GUID */
+		If (LEqual(Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) {
+			/* Let OS control everything */
+			Return (Arg3)
+		} Else {
+			/* Unrecognized UUID */
+			CreateDWordField(Arg3, 0, CDW1)
+			Or(CDW1, 4, CDW1)
+			Return (Arg3)
+		}
+	}
+
+	/* LPC Bridge 0:1f.0 */
+	#include "lpc.asl"
+
+	/* IRQ routing for each PCI device */
+	#include <asm/acpi/irqroute.asl>
+}
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/device.h b/roms/u-boot/arch/x86/include/asm/arch-quark/device.h
new file mode 100644
index 000000000..0c4391628
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/device.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#ifndef _QUARK_DEVICE_H_
+#define _QUARK_DEVICE_H_
+
+/*
+ * Internal PCI device numbers within the SoC.
+ *
+ * Note it must start with 0x_ prefix, as the device number macro will be
+ * included in the ACPI ASL files (see irq_helper.h and irq_route.h).
+ */
+
+#define QUARK_HOST_BRIDGE_DEV	0x00
+#define QUARK_HOST_BRIDGE_FUNC	0
+
+#define QUARK_DEV_20		0x14
+#define QUARK_MMC_SDIO_FUNC	0
+#define QUARK_UART0_FUNC	1
+#define QUARK_USB_DEVICE_FUNC	2
+#define QUARK_USB_EHCI_FUNC	3
+#define QUARK_USB_OHCI_FUNC	4
+#define QUARK_UART1_FUNC	5
+#define QUARK_EMAC0_FUNC	6
+#define QUARK_EMAC1_FUNC	7
+
+#define QUARK_DEV_21		0x15
+#define QUARK_SPI0_FUNC		0
+#define QUARK_SPI1_FUNC		1
+#define QUARK_I2C_GPIO_FUNC	2
+
+#define QUARK_DEV_23		0x17
+#define QUARK_PCIE0_FUNC	0
+#define QUARK_PCIE1_FUNC	1
+
+#define QUARK_LGC_BRIDGE_DEV	0x1f
+#define QUARK_LGC_BRIDGE_FUNC	0
+
+#ifndef __ASSEMBLY__
+#include <pci.h>
+
+#define QUARK_HOST_BRIDGE	\
+	PCI_BDF(0, QUARK_HOST_BRIDGE_DEV, QUARK_HOST_BRIDGE_FUNC)
+#define QUARK_MMC_SDIO		\
+	PCI_BDF(0, QUARK_DEV_20, QUARK_MMC_SDIO_FUNC)
+#define QUARK_UART0		\
+	PCI_BDF(0, QUARK_DEV_20, QUARK_UART0_FUNC)
+#define QUARK_USB_DEVICE	\
+	PCI_BDF(0, QUARK_DEV_20, QUARK_USB_DEVICE_FUNC)
+#define QUARK_USB_EHCI		\
+	PCI_BDF(0, QUARK_DEV_20, QUARK_USB_EHCI_FUNC)
+#define QUARK_USB_OHCI		\
+	PCI_BDF(0, QUARK_DEV_20, QUARK_USB_OHCI_FUNC)
+#define QUARK_UART1		\
+	PCI_BDF(0, QUARK_DEV_20, QUARK_UART1_FUNC)
+#define QUARK_EMAC0		\
+	PCI_BDF(0, QUARK_DEV_20, QUARK_EMAC0_FUNC)
+#define QUARK_EMAC1		\
+	PCI_BDF(0, QUARK_DEV_20, QUARK_EMAC1_FUNC)
+#define QUARK_SPI0		\
+	PCI_BDF(0, QUARK_DEV_21, QUARK_SPI0_FUNC)
+#define QUARK_SPI1		\
+	PCI_BDF(0, QUARK_DEV_21, QUARK_SPI1_FUNC)
+#define QUARK_I2C_GPIO		\
+	PCI_BDF(0, QUARK_DEV_21, QUARK_I2C_GPIO_FUNC)
+#define QUARK_PCIE0		\
+	PCI_BDF(0, QUARK_DEV_23, QUARK_PCIE0_FUNC)
+#define QUARK_PCIE1		\
+	PCI_BDF(0, QUARK_DEV_23, QUARK_PCIE1_FUNC)
+#define QUARK_LEGACY_BRIDGE	\
+	PCI_BDF(0, QUARK_LGC_BRIDGE_DEV, QUARK_LGC_BRIDGE_FUNC)
+#endif /* __ASSEMBLY__ */
+
+#endif /* _QUARK_DEVICE_H_ */
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/global_nvs.h b/roms/u-boot/arch/x86/include/asm/arch-quark/global_nvs.h
new file mode 100644
index 000000000..6e99e6737
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/global_nvs.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#ifndef _GLOBAL_NVS_H_
+#define _GLOBAL_NVS_H_
+
+struct __packed acpi_global_nvs {
+	u8	pcnt;		/* processor count */
+
+	/*
+	 * Add padding so sizeof(struct acpi_global_nvs) == 0x100.
+	 * This must match the size defined in the global_nvs.asl.
+	 */
+	u8	rsvd[255];
+};
+
+#endif /* _GLOBAL_NVS_H_ */
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/iomap.h b/roms/u-boot/arch/x86/include/asm/arch-quark/iomap.h
new file mode 100644
index 000000000..e233252dc
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/iomap.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#ifndef _QUARK_IOMAP_H_
+#define _QUARK_IOMAP_H_
+
+/* Memory Mapped IO bases */
+
+/* ESRAM */
+#define ESRAM_BASE_ADDRESS		CONFIG_ESRAM_BASE
+#define ESRAM_BASE_SIZE			ESRAM_SIZE
+
+/* PCI Configuration Space */
+#define MCFG_BASE_ADDRESS		CONFIG_PCIE_ECAM_BASE
+#define MCFG_BASE_SIZE			0x10000000
+
+/* High Performance Event Timer */
+#define HPET_BASE_ADDRESS		0xfed00000
+#define HPET_BASE_SIZE			0x400
+
+/* Root Complex Base Address */
+#define RCBA_BASE_ADDRESS		CONFIG_RCBA_BASE
+#define RCBA_BASE_SIZE			0x4000
+
+/* IO Port bases */
+#define ACPI_PM1_BASE_ADDRESS		CONFIG_ACPI_PM1_BASE
+#define ACPI_PM1_BASE_SIZE		0x10
+
+#define ACPI_PBLK_BASE_ADDRESS		CONFIG_ACPI_PBLK_BASE
+#define ACPI_PBLK_BASE_SIZE		0x10
+
+#define SPI_DMA_BASE_ADDRESS		CONFIG_SPI_DMA_BASE
+#define SPI_DMA_BASE_SIZE		0x10
+
+#define GPIO_BASE_ADDRESS		CONFIG_GPIO_BASE
+#define GPIO_BASE_SIZE			0x80
+
+#define ACPI_GPE0_BASE_ADDRESS		CONFIG_ACPI_GPE0_BASE
+#define ACPI_GPE0_BASE_SIZE		0x40
+
+#define WDT_BASE_ADDRESS		CONFIG_WDT_BASE
+#define WDT_BASE_SIZE			0x40
+
+#endif /* _QUARK_IOMAP_H_ */
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/irq.h b/roms/u-boot/arch/x86/include/asm/arch-quark/irq.h
new file mode 100644
index 000000000..2aaa728e7
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/irq.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#ifndef _QUARK_IRQ_H_
+#define _QUARK_IRQ_H_
+
+#define PIRQA_APIC_IRQ	16
+#define PIRQB_APIC_IRQ	17
+#define PIRQC_APIC_IRQ	18
+#define PIRQD_APIC_IRQ	19
+#define PIRQE_APIC_IRQ	20
+#define PIRQF_APIC_IRQ	21
+#define PIRQG_APIC_IRQ	22
+#define PIRQH_APIC_IRQ	23
+
+#endif /* _QUARK_IRQ_H_ */
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/mrc.h b/roms/u-boot/arch/x86/include/asm/arch-quark/mrc.h
new file mode 100644
index 000000000..2353426cd
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/mrc.h
@@ -0,0 +1,186 @@
+/* SPDX-License-Identifier: Intel */
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Ported from Intel released Quark UEFI BIOS
+ * QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei
+ */
+
+#ifndef _MRC_H_
+#define _MRC_H_
+
+#define MRC_VERSION	0x0111
+
+/* architectural definitions */
+#define NUM_CHANNELS	1	/* number of channels */
+#define NUM_RANKS	2	/* number of ranks per channel */
+#define NUM_BYTE_LANES	4	/* number of byte lanes per channel */
+
+/* software limitations */
+#define MAX_CHANNELS	1
+#define MAX_RANKS	2
+#define MAX_BYTE_LANES	4
+
+#define MAX_SOCKETS	1
+#define MAX_SIDES	1
+#define MAX_ROWS	(MAX_SIDES * MAX_SOCKETS)
+
+/* Specify DRAM and channel width */
+enum {
+	X8,	/* DRAM width */
+	X16,	/* DRAM width & Channel Width */
+	X32	/* Channel Width */
+};
+
+/* Specify DRAM speed */
+enum {
+	DDRFREQ_800,
+	DDRFREQ_1066
+};
+
+/* Specify DRAM type */
+enum {
+	DDR3,
+	DDR3L
+};
+
+/*
+ * density: 0=512Mb, 1=Gb, 2=2Gb, 3=4Gb
+ * cl: DRAM CAS Latency in clocks
+ * ras: ACT to PRE command period
+ * wtr: Delay from start of internal write transaction to internal read command
+ * rrd: ACT to ACT command period (JESD79 specific to page size 1K/2K)
+ * faw: Four activate window (JESD79 specific to page size 1K/2K)
+ *
+ * ras/wtr/rrd/faw timings are in picoseconds
+ *
+ * Refer to JEDEC spec (or DRAM datasheet) when changing these values.
+ */
+struct dram_params {
+	uint8_t density;
+	uint8_t cl;
+	uint32_t ras;
+	uint32_t wtr;
+	uint32_t rrd;
+	uint32_t faw;
+};
+
+/*
+ * Delay configuration for individual signals
+ * Vref setting
+ * Scrambler seed
+ */
+struct mrc_timings {
+	uint32_t rcvn[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t rdqs[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t wdqs[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t wdq[NUM_CHANNELS][NUM_RANKS][NUM_BYTE_LANES];
+	uint32_t vref[NUM_CHANNELS][NUM_BYTE_LANES];
+	uint32_t wctl[NUM_CHANNELS][NUM_RANKS];
+	uint32_t wcmd[NUM_CHANNELS];
+	uint32_t scrambler_seed;
+	/* need to save for the case of frequency change */
+	uint8_t ddr_speed;
+};
+
+/* Boot mode defined as bit mask (1<<n) */
+enum {
+	BM_UNKNOWN,
+	BM_COLD = 1,	/* full training */
+	BM_FAST = 2,	/* restore timing parameters */
+	BM_S3   = 4,	/* resume from S3 */
+	BM_WARM = 8
+};
+
+/* MRC execution status */
+#define MRC_SUCCESS	0	/* initialization ok */
+#define MRC_E_MEMTEST	1	/* memtest failed */
+
+/*
+ * Memory Reference Code parameters
+ *
+ * It includes 3 parts:
+ * - input parameters like boot mode and DRAM parameters
+ * - context parameters for MRC internal state
+ * - output parameters like initialization result and memory size
+ */
+struct mrc_params {
+	/* Input parameters */
+	uint32_t boot_mode;		/* BM_COLD, BM_FAST, BM_WARM, BM_S3 */
+	/* DRAM parameters */
+	uint8_t dram_width;		/* x8, x16 */
+	uint8_t ddr_speed;		/* DDRFREQ_800, DDRFREQ_1066 */
+	uint8_t ddr_type;		/* DDR3, DDR3L */
+	uint8_t ecc_enables;		/* 0, 1 (memory size reduced to 7/8) */
+	uint8_t scrambling_enables;	/* 0, 1 */
+	/* 1, 3 (1'st rank has to be populated if 2'nd rank present) */
+	uint32_t rank_enables;
+	uint32_t channel_enables;	/* 1 only */
+	uint32_t channel_width;		/* x16 only */
+	/* 0, 1, 2 (mode 2 forced if ecc enabled) */
+	uint32_t address_mode;
+	/* REFRESH_RATE: 1=1.95us, 2=3.9us, 3=7.8us, others=RESERVED */
+	uint8_t refresh_rate;
+	/* SR_TEMP_RANGE: 0=normal, 1=extended, others=RESERVED */
+	uint8_t sr_temp_range;
+	/*
+	 * RON_VALUE: 0=34ohm, 1=40ohm, others=RESERVED
+	 * (select MRS1.DIC driver impedance control)
+	 */
+	uint8_t ron_value;
+	/* RTT_NOM_VALUE: 0=40ohm, 1=60ohm, 2=120ohm, others=RESERVED */
+	uint8_t rtt_nom_value;
+	/* RD_ODT_VALUE: 0=off, 1=60ohm, 2=120ohm, 3=180ohm, others=RESERVED */
+	uint8_t rd_odt_value;
+	struct dram_params params;
+	/* Internally used context parameters */
+	uint32_t board_id;	/* board layout (use x8 or x16 memory) */
+	uint32_t hte_setup;	/* when set hte reconfiguration requested */
+	uint32_t menu_after_mrc;
+	uint32_t power_down_disable;
+	uint32_t tune_rcvn;
+	uint32_t channel_size[NUM_CHANNELS];
+	uint32_t column_bits[NUM_CHANNELS];
+	uint32_t row_bits[NUM_CHANNELS];
+	uint32_t mrs1;		/* register content saved during training */
+	uint8_t first_run;
+	/* Output parameters */
+	/* initialization result (non zero specifies error code) */
+	uint32_t status;
+	/* total memory size in bytes (excludes ECC banks) */
+	uint32_t mem_size;
+	/* training results (also used on input) */
+	struct mrc_timings timings;
+};
+
+/*
+ * MRC memory initialization structure
+ *
+ * post_code: a 16-bit post code of a specific initialization routine
+ * boot_path: bitwise or of BM_COLD, BM_FAST, BM_WARM and BM_S3
+ * init_fn: real memory initialization routine
+ */
+struct mem_init {
+	uint16_t post_code;
+	uint16_t boot_path;
+	void (*init_fn)(struct mrc_params *mrc_params);
+};
+
+/* MRC platform data flags */
+#define MRC_FLAG_ECC_EN		0x00000001
+#define MRC_FLAG_SCRAMBLE_EN	0x00000002
+#define MRC_FLAG_MEMTEST_EN	0x00000004
+/* 0b DDR "fly-by" topology else 1b DDR "tree" topology */
+#define MRC_FLAG_TOP_TREE_EN	0x00000008
+/* If set ODR signal is asserted to DRAM devices on writes */
+#define MRC_FLAG_WR_ODT_EN	0x00000010
+
+/**
+ * mrc_init - Memory Reference Code initialization entry routine
+ *
+ * @mrc_params: parameters for MRC
+ */
+void mrc_init(struct mrc_params *mrc_params);
+
+#endif /* _MRC_H_ */
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/msg_port.h b/roms/u-boot/arch/x86/include/asm/arch-quark/msg_port.h
new file mode 100644
index 000000000..9527fdad3
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/msg_port.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#ifndef _QUARK_MSG_PORT_H_
+#define _QUARK_MSG_PORT_H_
+
+/*
+ * In the Quark SoC, some chipset commands are accomplished by utilizing
+ * the internal message network within the host bridge (D0:F0). Accesses
+ * to this network are accomplished by populating the message control
+ * register (MCR), Message Control Register eXtension (MCRX) and the
+ * message data register (MDR).
+ */
+#define MSG_CTRL_REG		0xd0	/* Message Control Register */
+#define MSG_DATA_REG		0xd4	/* Message Data Register */
+#define MSG_CTRL_EXT_REG	0xd8	/* Message Control Register EXT */
+
+/* Normal Read/Write OpCodes */
+#define MSG_OP_READ		0x10
+#define MSG_OP_WRITE		0x11
+
+/* Alternative Read/Write OpCodes */
+#define MSG_OP_ALT_READ		0x06
+#define MSG_OP_ALT_WRITE	0x07
+
+/* IO Read/Write OpCodes */
+#define MSG_OP_IO_READ		0x02
+#define MSG_OP_IO_WRITE		0x03
+
+/* All byte enables */
+#define MSG_BYTE_ENABLE		0xf0
+
+#ifndef __ASSEMBLY__
+
+/**
+ * msg_port_setup - set up the message port control register
+ *
+ * @op:     message bus access opcode
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ */
+void msg_port_setup(int op, int port, int reg);
+
+/**
+ * msg_port_read - read a message port register using normal opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ *
+ * @return: message port register value
+ */
+u32 msg_port_read(u8 port, u32 reg);
+
+/**
+ * msg_port_write - write a message port register using normal opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ * @value:  register value to write
+ */
+void msg_port_write(u8 port, u32 reg, u32 value);
+
+/**
+ * msg_port_alt_read - read a message port register using alternative opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ *
+ * @return: message port register value
+ */
+u32 msg_port_alt_read(u8 port, u32 reg);
+
+/**
+ * msg_port_alt_write - write a message port register using alternative opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ * @value:  register value to write
+ */
+void msg_port_alt_write(u8 port, u32 reg, u32 value);
+
+/**
+ * msg_port_io_read - read a message port register using I/O opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ *
+ * @return: message port register value
+ */
+u32 msg_port_io_read(u8 port, u32 reg);
+
+/**
+ * msg_port_io_write - write a message port register using I/O opcode
+ *
+ * @port:   port number on the message bus
+ * @reg:    register number within a port
+ * @value:  register value to write
+ */
+void msg_port_io_write(u8 port, u32 reg, u32 value);
+
+/* clrbits, setbits, clrsetbits macros for message port access */
+
+#define msg_port_normal_read	msg_port_read
+#define msg_port_normal_write	msg_port_write
+
+#define msg_port_generic_clrsetbits(type, port, reg, clr, set)		\
+	msg_port_##type##_write(port, reg,				\
+				(msg_port_##type##_read(port, reg)	\
+				& ~(clr)) | (set))
+
+#define msg_port_clrbits(port, reg, clr)		\
+	msg_port_generic_clrsetbits(normal, port, reg, clr, 0)
+#define msg_port_setbits(port, reg, set)		\
+	msg_port_generic_clrsetbits(normal, port, reg, 0, set)
+#define msg_port_clrsetbits(port, reg, clr, set)	\
+	msg_port_generic_clrsetbits(normal, port, reg, clr, set)
+
+#define msg_port_alt_clrbits(port, reg, clr)		\
+	msg_port_generic_clrsetbits(alt, port, reg, clr, 0)
+#define msg_port_alt_setbits(port, reg, set)		\
+	msg_port_generic_clrsetbits(alt, port, reg, 0, set)
+#define msg_port_alt_clrsetbits(port, reg, clr, set)	\
+	msg_port_generic_clrsetbits(alt, port, reg, clr, set)
+
+#define msg_port_io_clrbits(port, reg, clr)		\
+	msg_port_generic_clrsetbits(io, port, reg, clr, 0)
+#define msg_port_io_setbits(port, reg, set)		\
+	msg_port_generic_clrsetbits(io, port, reg, 0, set)
+#define msg_port_io_clrsetbits(port, reg, clr, set)	\
+	msg_port_generic_clrsetbits(io, port, reg, clr, set)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _QUARK_MSG_PORT_H_ */
diff --git a/roms/u-boot/arch/x86/include/asm/arch-quark/quark.h b/roms/u-boot/arch/x86/include/asm/arch-quark/quark.h
new file mode 100644
index 000000000..feca1983b
--- /dev/null
+++ b/roms/u-boot/arch/x86/include/asm/arch-quark/quark.h
@@ -0,0 +1,259 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#ifndef _QUARK_H_
+#define _QUARK_H_
+
+/* Message Bus Ports */
+#define MSG_PORT_MEM_ARBITER	0x00
+#define MSG_PORT_HOST_BRIDGE	0x03
+#define MSG_PORT_RMU		0x04
+#define MSG_PORT_MEM_MGR	0x05
+#define MSG_PORT_USB_AFE	0x14
+#define MSG_PORT_PCIE_AFE	0x16
+#define MSG_PORT_SOC_UNIT	0x31
+
+/* Port 0x00: Memory Arbiter Message Port Registers */
+
+/* Enhanced Configuration Space */
+#define AEC_CTRL		0x00
+
+/* Port 0x03: Host Bridge Message Port Registers */
+
+/* Host Miscellaneous Controls 2 */
+#define HMISC2			0x03
+
+#define HMISC2_SEGE		0x00000002
+#define HMISC2_SEGF		0x00000004
+#define HMISC2_SEGAB		0x00000010
+
+/* Host Memory I/O Boundary */
+#define HM_BOUND		0x08
+#define HM_BOUND_LOCK		0x00000001
+
+/* Extended Configuration Space */
+#define HEC_REG			0x09
+
+/* MTRR Registers */
+#define MTRR_CAP		0x40
+#define MTRR_DEF_TYPE		0x41
+
+#define MTRR_FIX_64K_00000	0x42
+#define MTRR_FIX_64K_40000	0x43
+#define MTRR_FIX_16K_80000	0x44
+#define MTRR_FIX_16K_90000	0x45
+#define MTRR_FIX_16K_A0000	0x46
+#define MTRR_FIX_16K_B0000	0x47
+#define MTRR_FIX_4K_C0000	0x48
+#define MTRR_FIX_4K_C4000	0x49
+#define MTRR_FIX_4K_C8000	0x4a
+#define MTRR_FIX_4K_CC000	0x4b
+#define MTRR_FIX_4K_D0000	0x4c
+#define MTRR_FIX_4K_D4000	0x4d
+#define MTRR_FIX_4K_D8000	0x4e
+#define MTRR_FIX_4K_DC000	0x4f
+#define MTRR_FIX_4K_E0000	0x50
+#define MTRR_FIX_4K_E4000	0x51
+#define MTRR_FIX_4K_E8000	0x52
+#define MTRR_FIX_4K_EC000	0x53
+#define MTRR_FIX_4K_F0000	0x54
+#define MTRR_FIX_4K_F4000	0x55
+#define MTRR_FIX_4K_F8000	0x56
+#define MTRR_FIX_4K_FC000	0x57
+
+#define MTRR_SMRR_PHYBASE	0x58
+#define MTRR_SMRR_PHYMASK	0x59
+
+#define MTRR_VAR_PHYBASE(n)	(0x5a + 2 * (n))
+#define MTRR_VAR_PHYMASK(n)	(0x5b + 2 * (n))
+
+#ifndef __ASSEMBLY__
+
+/* variable range MTRR usage */
+enum {
+	MTRR_VAR_ROM,
+	MTRR_VAR_ESRAM,
+	MTRR_VAR_RAM
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* Port 0x04: Remote Management Unit Message Port Registers */
+
+/* ACPI PBLK Base Address Register */
+#define PBLK_BA			0x70
+
+/* Control Register */
+#define RMU_CTRL		0x71
+
+/* SPI DMA Base Address Register */
+#define SPI_DMA_BA		0x7a
+
+/* Thermal Sensor Register */
+#define TS_MODE			0xb0
+#define TS_TEMP			0xb1
+#define TS_TRIP			0xb2
+
+/* Port 0x05: Memory Manager Message Port Registers */
+
+/* eSRAM Block Page Control */
+#define ESRAM_BLK_CTRL		0x82
+#define ESRAM_BLOCK_MODE	0x10000000
+
+/* Port 0x14: USB2 AFE Unit Port Registers */
+
+#define USB2_GLOBAL_PORT	0x4001
+#define USB2_PLL1		0x7f02
+#define USB2_PLL2		0x7f03
+#define USB2_COMPBG		0x7f04
+
+/* Port 0x16: PCIe AFE Unit Port Registers */
+
+#define PCIE_RXPICTRL0_L0	0x2080
+#define PCIE_RXPICTRL0_L1	0x2180
+
+/* Port 0x31: SoC Unit Port Registers */
+
+/* Thermal Sensor Config */
+#define TS_CFG1			0x31
+#define TS_CFG2			0x32
+#define TS_CFG3			0x33
+#define TS_CFG4			0x34
+
+/* PCIe Controller Config */
+#define PCIE_CFG		0x36
+#define PCIE_CTLR_PRI_RST	0x00010000
+#define PCIE_PHY_SB_RST		0x00020000
+#define PCIE_CTLR_SB_RST	0x00040000
+#define PCIE_PHY_LANE_RST	0x00090000
+#define PCIE_CTLR_MAIN_RST	0x00100000
+
+/* DRAM */
+#define DRAM_BASE		0x00000000
+#define DRAM_MAX_SIZE		0x80000000
+
+/* eSRAM */
+#define ESRAM_SIZE		0x80000
+
+/* Memory BAR Enable */
+#define MEM_BAR_EN		0x00000001
+
+/* I/O BAR Enable */
+#define IO_BAR_EN		0x80000000
+
+/* 64KiB of RMU binary in flash */
+#define RMU_BINARY_SIZE		0x10000
+
+/* PCIe Root Port Configuration Registers */
+
+#define PCIE_RP_CCFG		0xd0
+#define CCFG_UPRS		(1 << 14)
+#define CCFG_UNRS		(1 << 15)
+#define CCFG_UNSD		(1 << 23)
+#define CCFG_UPSD		(1 << 24)
+
+#define PCIE_RP_MPC2		0xd4
+#define MPC2_IPF		(1 << 11)
+
+#define PCIE_RP_MBC		0xf4
+#define MBC_SBIC		(3 << 16)
+
+/* Legacy Bridge PCI Configuration Registers */
+#define LB_GBA			0x44
+#define LB_PM1BLK		0x48
+#define LB_GPE0BLK		0x4c
+#define LB_ACTL			0x58
+#define LB_PABCDRC		0x60
+#define LB_PEFGHRC		0x64
+#define LB_WDTBA		0x84
+#define LB_BCE			0xd4
+#define LB_BC			0xd8
+#define LB_RCBA			0xf0
+
+/* USB EHCI memory-mapped registers */
+#define EHCI_INSNREG01		0x94
+
+/* USB device memory-mapped registers */
+#define USBD_INT_MASK		0x410
+#define USBD_EP_INT_STS		0x414
+#define USBD_EP_INT_MASK	0x418
+
+#ifndef __ASSEMBLY__
+
+/* Root Complex Register Block */
+struct quark_rcba {
+	u32	rctl;
+	u32	esd;
+	u32	rsvd1[3150];
+	u16	rmu_ir;
+	u16	d23_ir;
+	u16	core_ir;
+	u16	d20d21_ir;
+};
+
+#include <asm/io.h>
+#include <asm/pci.h>
+
+/**
+ * qrk_pci_read_config_dword() - Read a configuration value
+ *
+ * @dev:	PCI device address: bus, device and function
+ * @offset:	Dword offset within the device's configuration space
+ * @valuep:	Place to put the returned value
+ *
+ * Note: This routine is inlined to provide better performance on Quark
+ */
+static inline void qrk_pci_read_config_dword(pci_dev_t dev, int offset,
+					     u32 *valuep)
+{
+	outl(dev | offset | PCI_CFG_EN, PCI_REG_ADDR);
+	*valuep = inl(PCI_REG_DATA);
+}
+
+/**
+ * qrk_pci_write_config_dword() - Write a PCI configuration value
+ *
+ * @dev:	PCI device address: bus, device and function
+ * @offset:	Dword offset within the device's configuration space
+ * @value:	Value to write
+ *
+ * Note: This routine is inlined to provide better performance on Quark
+ */
+static inline void qrk_pci_write_config_dword(pci_dev_t dev, int offset,
+					      u32 value)
+{
+	outl(dev | offset | PCI_CFG_EN, PCI_REG_ADDR);
+	outl(value, PCI_REG_DATA);
+}
+
+/**
+ * board_assert_perst() - Assert the PERST# pin
+ *
+ * The CPU interface to the PERST# signal on Quark is platform dependent.
+ * Board-specific codes need supply this routine to assert PCIe slot reset.
+ *
+ * The tricky part in this routine is that any APIs that may trigger PCI
+ * enumeration process are strictly forbidden, as any access to PCIe root
+ * port's configuration registers will cause system hang while it is held
+ * in reset.
+ */
+void board_assert_perst(void);
+
+/**
+ * board_deassert_perst() - De-assert the PERST# pin
+ *
+ * The CPU interface to the PERST# signal on Quark is platform dependent.
+ * Board-specific codes need supply this routine to de-assert PCIe slot reset.
+ *
+ * The tricky part in this routine is that any APIs that may trigger PCI
+ * enumeration process are strictly forbidden, as any access to PCIe root
+ * port's configuration registers will cause system hang while it is held
+ * in reset.
+ */
+void board_deassert_perst(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _QUARK_H_ */