Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

4 files changed, 271 insertions, 0 deletions

diff --git a/roms/u-boot/board/amlogic/vim3/MAINTAINERS b/roms/u-boot/board/amlogic/vim3/MAINTAINERS
new file mode 100644
index 000000000..92b426f66
--- /dev/null
+++ b/roms/u-boot/board/amlogic/vim3/MAINTAINERS
@@ -0,0 +1,9 @@
+VIM3
+M:	Neil Armstrong <narmstrong@baylibre.com>
+S:	Maintained
+L:	u-boot-amlogic@groups.io
+F:	board/amlogic/vim3/
+F:	configs/khadas-vim3_defconfig
+F:	configs/khadas-vim3l_defconfig
+F:	doc/board/amlogic/khadas-vim3.rst
+F:	doc/board/amlogic/khadas-vim3l.rst
diff --git a/roms/u-boot/board/amlogic/vim3/Makefile b/roms/u-boot/board/amlogic/vim3/Makefile
new file mode 100644
index 000000000..c51507730
--- /dev/null
+++ b/roms/u-boot/board/amlogic/vim3/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2020 BayLibre, SAS
+# Author: Neil Armstrong <narmstrong@baylibre.com>
+
+obj-y	:= vim3.o
diff --git a/roms/u-boot/board/amlogic/vim3/khadas-mcu.h b/roms/u-boot/board/amlogic/vim3/khadas-mcu.h
new file mode 100644
index 000000000..de3758caf
--- /dev/null
+++ b/roms/u-boot/board/amlogic/vim3/khadas-mcu.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Khadas System control Microcontroller Register map
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ *
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef MFD_KHADAS_MCU_H
+#define MFD_KHADAS_MCU_H
+
+#define KHADAS_MCU_PASSWD_VEN_0_REG		0x00 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_1_REG		0x01 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_2_REG		0x02 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_3_REG		0x03 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_4_REG		0x04 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_5_REG		0x05 /* RO */
+#define KHADAS_MCU_MAC_0_REG			0x06 /* RO */
+#define KHADAS_MCU_MAC_1_REG			0x07 /* RO */
+#define KHADAS_MCU_MAC_2_REG			0x08 /* RO */
+#define KHADAS_MCU_MAC_3_REG			0x09 /* RO */
+#define KHADAS_MCU_MAC_4_REG			0x0a /* RO */
+#define KHADAS_MCU_MAC_5_REG			0x0b /* RO */
+#define KHADAS_MCU_USID_0_REG			0x0c /* RO */
+#define KHADAS_MCU_USID_1_REG			0x0d /* RO */
+#define KHADAS_MCU_USID_2_REG			0x0e /* RO */
+#define KHADAS_MCU_USID_3_REG			0x0f /* RO */
+#define KHADAS_MCU_USID_4_REG			0x10 /* RO */
+#define KHADAS_MCU_USID_5_REG			0x11 /* RO */
+#define KHADAS_MCU_VERSION_0_REG		0x12 /* RO */
+#define KHADAS_MCU_VERSION_1_REG		0x13 /* RO */
+#define KHADAS_MCU_DEVICE_NO_0_REG		0x14 /* RO */
+#define KHADAS_MCU_DEVICE_NO_1_REG		0x15 /* RO */
+#define KHADAS_MCU_FACTORY_TEST_REG		0x16 /* R */
+#define KHADAS_MCU_BOOT_MODE_REG		0x20 /* RW */
+#define KHADAS_MCU_BOOT_EN_WOL_REG		0x21 /* RW */
+#define KHADAS_MCU_BOOT_EN_RTC_REG		0x22 /* RW */
+#define KHADAS_MCU_BOOT_EN_EXP_REG		0x23 /* RW */
+#define KHADAS_MCU_BOOT_EN_IR_REG		0x24 /* RW */
+#define KHADAS_MCU_BOOT_EN_DCIN_REG		0x25 /* RW */
+#define KHADAS_MCU_BOOT_EN_KEY_REG		0x26 /* RW */
+#define KHADAS_MCU_KEY_MODE_REG			0x27 /* RW */
+#define KHADAS_MCU_LED_MODE_ON_REG		0x28 /* RW */
+#define KHADAS_MCU_LED_MODE_OFF_REG		0x29 /* RW */
+#define KHADAS_MCU_SHUTDOWN_NORMAL_REG		0x2c /* RW */
+#define KHADAS_MCU_MAC_SWITCH_REG		0x2d /* RW */
+#define KHADAS_MCU_MCU_SLEEP_MODE_REG		0x2e /* RW */
+#define KHADAS_MCU_IR_CODE1_0_REG		0x2f /* RW */
+#define KHADAS_MCU_IR_CODE1_1_REG		0x30 /* RW */
+#define KHADAS_MCU_IR_CODE1_2_REG		0x31 /* RW */
+#define KHADAS_MCU_IR_CODE1_3_REG		0x32 /* RW */
+#define KHADAS_MCU_USB_PCIE_SWITCH_REG		0x33 /* RW */
+#define KHADAS_MCU_IR_CODE2_0_REG		0x34 /* RW */
+#define KHADAS_MCU_IR_CODE2_1_REG		0x35 /* RW */
+#define KHADAS_MCU_IR_CODE2_2_REG		0x36 /* RW */
+#define KHADAS_MCU_IR_CODE2_3_REG		0x37 /* RW */
+#define KHADAS_MCU_PASSWD_USER_0_REG		0x40 /* RW */
+#define KHADAS_MCU_PASSWD_USER_1_REG		0x41 /* RW */
+#define KHADAS_MCU_PASSWD_USER_2_REG		0x42 /* RW */
+#define KHADAS_MCU_PASSWD_USER_3_REG		0x43 /* RW */
+#define KHADAS_MCU_PASSWD_USER_4_REG		0x44 /* RW */
+#define KHADAS_MCU_PASSWD_USER_5_REG		0x45 /* RW */
+#define KHADAS_MCU_USER_DATA_0_REG		0x46 /* RW 56 bytes */
+#define KHADAS_MCU_PWR_OFF_CMD_REG		0x80 /* WO */
+#define KHADAS_MCU_PASSWD_START_REG		0x81 /* WO */
+#define KHADAS_MCU_CHECK_VEN_PASSWD_REG		0x82 /* WO */
+#define KHADAS_MCU_CHECK_USER_PASSWD_REG	0x83 /* WO */
+#define KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG	0x86 /* RO */
+#define KHADAS_MCU_WOL_INIT_START_REG		0x87 /* WO */
+#define KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG	0x88 /* WO */
+
+enum {
+	KHADAS_BOARD_VIM1 = 0x1,
+	KHADAS_BOARD_VIM2,
+	KHADAS_BOARD_VIM3,
+	KHADAS_BOARD_EDGE = 0x11,
+	KHADAS_BOARD_EDGE_V,
+};
+
+#endif /* MFD_KHADAS_MCU_H */
diff --git a/roms/u-boot/board/amlogic/vim3/vim3.c b/roms/u-boot/board/amlogic/vim3/vim3.c
new file mode 100644
index 000000000..6cd5f2e11
--- /dev/null
+++ b/roms/u-boot/board/amlogic/vim3/vim3.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env_internal.h>
+#include <init.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/boot.h>
+#include <asm/arch/eth.h>
+#include <asm/arch/sm.h>
+#include <asm/global_data.h>
+#include <i2c.h>
+#include "khadas-mcu.h"
+
+int mmc_get_env_dev(void)
+{
+	if (meson_get_boot_device() == BOOT_DEVICE_EMMC)
+		return 2;
+	return 1;
+}
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ */
+int meson_ft_board_setup(void *blob, struct bd_info *bd)
+{
+	struct udevice *bus, *dev;
+	int node, i2c_node, ret;
+	unsigned int i2c_addr;
+	u32 *val;
+
+	/* Find I2C device */
+	node = fdt_node_offset_by_compatible(gd->fdt_blob, -1, "khadas,mcu");
+	if (node < 0) {
+		printf("vim3: cannot find khadas,mcu node\n");
+		return 0;
+	}
+
+	/* Get addr */
+	val = (u32 *)fdt_getprop(gd->fdt_blob, node, "reg", NULL);
+	if (!val) {
+		printf("vim3: cannot find khadas,mcu node i2c addr\n");
+		return 0;
+	}
+	i2c_addr = fdt32_to_cpu(*val);
+
+	/* Get i2c device */
+	i2c_node = fdt_parent_offset(gd->fdt_blob, node);
+	if (node < 0) {
+		printf("vim3: cannot find khadas,mcu i2c node\n");
+		return 0;
+	}
+
+	ret = uclass_get_device_by_of_offset(UCLASS_I2C, i2c_node, &bus);
+	if (ret < 0) {
+		printf("vim3: cannot find i2c bus (%d)\n", ret);
+		return 0;
+	}
+
+	ret = i2c_get_chip(bus, i2c_addr, 1, &dev);
+	if (ret < 0) {
+		printf("vim3: cannot find i2c chip (%d)\n", ret);
+		return 0;
+	}
+
+	/* Read USB_PCIE_SWITCH_REG */
+	ret = dm_i2c_reg_read(dev, KHADAS_MCU_USB_PCIE_SWITCH_REG);
+	if (ret < 0) {
+		printf("vim3: failed to read i2c reg (%d)\n", ret);
+		return 0;
+	}
+	debug("MCU_USB_PCIE_SWITCH_REG: %d\n", ret);
+
+	/*
+	 * If in PCIe mode, alter DT
+	 * 0：Enable USB3.0，Disable PCIE, 1：Disable USB3.0, Enable PCIE
+	 */
+	if (ret > 0) {
+		static char data[32] __aligned(4);
+		const void *ptmp;
+		int len;
+
+		/* Find USB node */
+		node = fdt_node_offset_by_compatible(blob, -1, "amlogic,meson-g12a-usb-ctrl");
+		if (node < 0) {
+			printf("vim3: cannot find amlogic,meson-g12a-usb-ctrl node\n");
+			return 0;
+		}
+
+		/* Update PHY names (mandatory to disable USB3.0) */
+		len = strlcpy(data, "usb2-phy0", 32) + 1;
+		len += strlcpy(&data[len], "usb2-phy1", 32 - len) + 1;
+		ret = fdt_setprop(blob, node, "phy-names", data, len);
+		if (ret < 0) {
+			printf("vim3: failed to update usb phy names property (%d)\n", ret);
+			return 0;
+		}
+
+		/* Update PHY list, by keeping the 2 first entries (optional) */
+		ptmp = fdt_getprop(blob, node, "phys", &len);
+		if (ptmp) {
+			memcpy(data, ptmp, min_t(unsigned int, 2 * sizeof(u32), len));
+
+			ret = fdt_setprop(blob, node, "phys", data,
+					  min_t(unsigned int, 2 * sizeof(u32), len));
+			if (ret < 0)
+				printf("vim3: failed to update usb phys property (%d)\n", ret);
+		} else
+			printf("vim3: cannot find usb node phys property\n");
+
+		/* Find PCIe node */
+		node = fdt_node_offset_by_compatible(blob, -1, "amlogic,g12a-pcie");
+		if (node < 0) {
+			printf("vim3: cannot find amlogic,g12a-pcie node\n");
+			return 0;
+		}
+
+		/* Enable PCIe */
+		len = strlcpy(data, "okay", 32);
+		ret = fdt_setprop(blob, node, "status", data, len);
+		if (ret < 0) {
+			printf("vim3: failed to enable pcie node (%d)\n", ret);
+			return 0;
+		}
+
+		printf("vim3: successfully enabled PCIe\n");
+	}
+
+	return 0;
+}
+
+#define EFUSE_MAC_OFFSET	0
+#define EFUSE_MAC_SIZE		12
+#define MAC_ADDR_LEN		6
+
+int misc_init_r(void)
+{
+	u8 mac_addr[MAC_ADDR_LEN];
+	char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
+	ssize_t len;
+
+	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
+		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
+					  efuse_mac_addr, EFUSE_MAC_SIZE);
+		if (len != EFUSE_MAC_SIZE)
+			return 0;
+
+		/* MAC is stored in ASCII format, 1bytes = 2characters */
+		for (int i = 0; i < 6; i++) {
+			tmp[0] = efuse_mac_addr[i * 2];
+			tmp[1] = efuse_mac_addr[i * 2 + 1];
+			tmp[2] = '\0';
+			mac_addr[i] = simple_strtoul(tmp, NULL, 16);
+		}
+
+		if (is_valid_ethaddr(mac_addr))
+			eth_env_set_enetaddr("ethaddr", mac_addr);
+		else
+			meson_generate_serial_ethaddr();
+
+		eth_env_get_enetaddr("ethaddr", mac_addr);
+	}
+
+	return 0;
+}