Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 397 insertions, 0 deletions

diff --git a/roms/u-boot/board/freescale/t102xrdb/t102xrdb.c b/roms/u-boot/board/freescale/t102xrdb/t102xrdb.c
new file mode 100644
index 000000000..51a36abe3
--- /dev/null
+++ b/roms/u-boot/board/freescale/t102xrdb/t102xrdb.c
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
+ */
+
+#include <common.h>
+#include <command.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <image.h>
+#include <init.h>
+#include <netdev.h>
+#include <asm/global_data.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+#include "t102xrdb.h"
+#ifdef CONFIG_TARGET_T1024RDB
+#include "cpld.h"
+#elif defined(CONFIG_TARGET_T1023RDB)
+#include <i2c.h>
+#include <mmc.h>
+#endif
+#include "../common/sleep.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_TARGET_T1023RDB
+enum {
+	GPIO1_SD_SEL    = 0x00020000, /* GPIO1_14, 0: eMMC, 1:SD/MMC */
+	GPIO1_EMMC_SEL,
+	GPIO3_GET_VERSION,	       /* GPIO3_4/5, 00:RevB, 01: RevC */
+	GPIO3_BRD_VER_MASK = 0x0c000000,
+	GPIO3_OFFSET = 0x2000,
+	I2C_GET_BANK,
+	I2C_SET_BANK0,
+	I2C_SET_BANK4,
+};
+#endif
+
+int checkboard(void)
+{
+	struct cpu_type *cpu = gd->arch.cpu;
+	static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_s1;
+
+	srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	printf("Board: %sRDB, ", cpu->name);
+#if defined(CONFIG_TARGET_T1024RDB)
+	printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
+	       CPLD_READ(hw_ver), CPLD_READ(sw_ver));
+#elif defined(CONFIG_TARGET_T1023RDB)
+	printf("Rev%c, ", t1023rdb_ctrl(GPIO3_GET_VERSION) + 'B');
+#endif
+	printf("boot from ");
+
+#ifdef CONFIG_SDCARD
+	puts("SD/MMC\n");
+#elif CONFIG_SPIFLASH
+	puts("SPI\n");
+#elif defined(CONFIG_TARGET_T1024RDB)
+	u8 reg;
+
+	reg = CPLD_READ(flash_csr);
+
+	if (reg & CPLD_BOOT_SEL) {
+		puts("NAND\n");
+	} else {
+		reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
+		printf("NOR vBank%d\n", reg);
+	}
+#elif defined(CONFIG_TARGET_T1023RDB)
+#ifdef CONFIG_MTD_RAW_NAND
+	puts("NAND\n");
+#else
+	printf("NOR vBank%d\n", t1023rdb_ctrl(I2C_GET_BANK));
+#endif
+#endif
+
+	puts("SERDES Reference Clocks:\n");
+	if (srds_s1 == 0x95)
+		printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+	else
+		printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[1]);
+
+	return 0;
+}
+
+#ifdef CONFIG_TARGET_T1024RDB
+static void board_mux_lane(void)
+{
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s1;
+	u8 reg = CPLD_READ(misc_ctl_status);
+
+	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+	if (srds_prtcl_s1 == 0x95) {
+		/* Route Lane B to PCIE */
+		CPLD_WRITE(misc_ctl_status, reg & ~CPLD_PCIE_SGMII_MUX);
+	} else {
+		/* Route Lane B to SGMII */
+		CPLD_WRITE(misc_ctl_status, reg | CPLD_PCIE_SGMII_MUX);
+	}
+	CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN);
+}
+#endif
+
+int board_early_init_f(void)
+{
+#if defined(CONFIG_DEEP_SLEEP)
+	if (is_warm_boot())
+		fsl_dp_disable_console();
+#endif
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+#ifdef CONFIG_SYS_FLASH_BASE
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	int flash_esel = find_tlb_idx((void *)flashbase, 1);
+	/*
+	 * Remap Boot flash region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+	if (flash_esel == -1) {
+		/* very unlikely unless something is messed up */
+		puts("Error: Could not find TLB for FLASH BASE\n");
+		flash_esel = 2;	/* give our best effort to continue */
+	} else {
+		/* invalidate existing TLB entry for flash + promjet */
+		disable_tlb(flash_esel);
+	}
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, flash_esel, BOOKE_PAGESZ_256M, 1);
+#endif
+
+#ifdef CONFIG_TARGET_T1024RDB
+	board_mux_lane();
+#endif
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	return CONFIG_SYS_CLK_FREQ;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	return CONFIG_DDR_CLK_FREQ;
+}
+
+#ifdef CONFIG_TARGET_T1024RDB
+void board_reset(void)
+{
+	CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
+}
+#endif
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = env_get_bootm_low();
+	size = env_get_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+	fsl_fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#ifndef CONFIG_DM_ETH
+	fdt_fixup_fman_ethernet(blob);
+#endif
+	fdt_fixup_board_enet(blob);
+#endif
+
+#ifdef CONFIG_TARGET_T1023RDB
+	if (t1023rdb_ctrl(GPIO3_GET_VERSION) > 0)
+		fdt_enable_nor(blob);
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_TARGET_T1023RDB
+/* Enable NOR flash for RevC */
+static void fdt_enable_nor(void *blob)
+{
+	int nodeoff = fdt_node_offset_by_compatible(blob, 0, "cfi-flash");
+
+	if (nodeoff >= 0)
+		fdt_status_okay(blob, nodeoff);
+	else
+		printf("WARNING unable to set status for NOR\n");
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+	u32 val = in_be32(&pgpio->gpdat);
+
+	/* GPIO1_14, 0: eMMC, 1: SD/MMC */
+	val &= GPIO1_SD_SEL;
+
+	return val ? -1 : 1;
+}
+
+int board_mmc_getwp(struct mmc *mmc)
+{
+	ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+	u32 val = in_be32(&pgpio->gpdat);
+
+	val &= GPIO1_SD_SEL;
+
+	return val ? -1 : 0;
+}
+
+static u32 t1023rdb_ctrl(u32 ctrl_type)
+{
+	ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+	ccsr_gur_t __iomem  *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 val;
+	u8 tmp;
+	int bus_num = I2C_PCA6408_BUS_NUM;
+
+#if CONFIG_IS_ENABLED(DM_I2C)
+	struct udevice *dev;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_PCA6408_ADDR,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	switch (ctrl_type) {
+	case GPIO1_SD_SEL:
+		val = in_be32(&pgpio->gpdat);
+		val |= GPIO1_SD_SEL;
+		out_be32(&pgpio->gpdat, val);
+		setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
+		break;
+	case GPIO1_EMMC_SEL:
+		val = in_be32(&pgpio->gpdat);
+		val &= ~GPIO1_SD_SEL;
+		out_be32(&pgpio->gpdat, val);
+		setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
+		break;
+	case GPIO3_GET_VERSION:
+		pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR
+			 + GPIO3_OFFSET);
+		val = in_be32(&pgpio->gpdat);
+		val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3;
+		if (val == 0x3) /* GPIO3_4/5 not used on RevB */
+			val = 0;
+		return val;
+	case I2C_GET_BANK:
+		dm_i2c_read(dev, 0, &tmp, 1);
+		tmp &= 0x7;
+		tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2);
+		return tmp;
+	case I2C_SET_BANK0:
+		tmp = 0x0;
+		dm_i2c_write(dev, 1, &tmp, 1);
+		tmp = 0xf8;
+		dm_i2c_write(dev, 3, &tmp, 1);
+		/* asserting HRESET_REQ */
+		out_be32(&gur->rstcr, 0x2);
+		break;
+	case I2C_SET_BANK4:
+		tmp = 0x1;
+		dm_i2c_write(dev, 1, &tmp, 1);
+		tmp = 0xf8;
+		dm_i2c_write(dev, 3, &tmp, 1);
+		out_be32(&gur->rstcr, 0x2);
+		break;
+	default:
+		break;
+	}
+#else
+	u32 orig_bus;
+
+	orig_bus = i2c_get_bus_num();
+
+	switch (ctrl_type) {
+	case GPIO1_SD_SEL:
+		val = in_be32(&pgpio->gpdat);
+		val |= GPIO1_SD_SEL;
+		out_be32(&pgpio->gpdat, val);
+		setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
+		break;
+	case GPIO1_EMMC_SEL:
+		val = in_be32(&pgpio->gpdat);
+		val &= ~GPIO1_SD_SEL;
+		out_be32(&pgpio->gpdat, val);
+		setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
+		break;
+	case GPIO3_GET_VERSION:
+		pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR
+			 + GPIO3_OFFSET);
+		val = in_be32(&pgpio->gpdat);
+		val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3;
+		if (val == 0x3) /* GPIO3_4/5 not used on RevB */
+			val = 0;
+		return val;
+	case I2C_GET_BANK:
+		i2c_set_bus_num(bus_num);
+		i2c_read(I2C_PCA6408_ADDR, 0, 1, &tmp, 1);
+		tmp &= 0x7;
+		tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2);
+		i2c_set_bus_num(orig_bus);
+		return tmp;
+	case I2C_SET_BANK0:
+		i2c_set_bus_num(bus_num);
+		tmp = 0x0;
+		i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1);
+		tmp = 0xf8;
+		i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1);
+		/* asserting HRESET_REQ */
+		out_be32(&gur->rstcr, 0x2);
+		break;
+	case I2C_SET_BANK4:
+		i2c_set_bus_num(bus_num);
+		tmp = 0x1;
+		i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1);
+		tmp = 0xf8;
+		i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1);
+		out_be32(&gur->rstcr, 0x2);
+		break;
+	default:
+		break;
+	}
+#endif
+	return 0;
+}
+
+static int switch_cmd(struct cmd_tbl *cmdtp, int flag, int argc,
+		      char *const argv[])
+{
+	if (argc < 2)
+		return CMD_RET_USAGE;
+	if (!strcmp(argv[1], "bank0"))
+		t1023rdb_ctrl(I2C_SET_BANK0);
+	else if (!strcmp(argv[1], "bank4") || !strcmp(argv[1], "altbank"))
+		t1023rdb_ctrl(I2C_SET_BANK4);
+	else if (!strcmp(argv[1], "sd"))
+		t1023rdb_ctrl(GPIO1_SD_SEL);
+	else if (!strcmp(argv[1], "emmc"))
+		t1023rdb_ctrl(GPIO1_EMMC_SEL);
+	else
+		return CMD_RET_USAGE;
+	return 0;
+}
+
+U_BOOT_CMD(
+	switch, 2, 0, switch_cmd,
+	"for bank0/bank4/sd/emmc switch control in runtime",
+	"command (e.g. switch bank4)"
+);
+#endif