Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 265 insertions, 0 deletions

diff --git a/roms/u-boot/board/keymile/kmp204x/kmp204x.c b/roms/u-boot/board/keymile/kmp204x/kmp204x.c
new file mode 100644
index 000000000..29dde7a80
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/kmp204x.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2011,2012 Freescale Semiconductor, Inc.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <image.h>
+#include <init.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/common.h"
+#include "../common/qrio.h"
+#include "kmp204x.h"
+
+static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+
+int checkboard(void)
+{
+	printf("Board: Keymile %s\n", CONFIG_SYS_CONFIG_NAME);
+
+	return 0;
+}
+
+#define ZL30158_RST	8
+#define BFTIC4_RST	0
+#define RSTRQSR1_WDT_RR	0x00200000
+#define RSTRQSR1_SW_RR	0x00100000
+
+int board_early_init_f(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	bool cpuwd_flag = false;
+
+	/* configure mode for uP reset request */
+	qrio_uprstreq(UPREQ_CORE_RST);
+
+	/* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */
+	setbits_be32(&gur->ddrclkdr, 0x001f000f);
+
+	/* set reset reason according CPU register */
+	if ((gur->rstrqsr1 & (RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR)) ==
+	    RSTRQSR1_WDT_RR)
+		cpuwd_flag = true;
+
+	qrio_cpuwd_flag(cpuwd_flag);
+	/* clear CPU bits by writing 1 */
+	setbits_be32(&gur->rstrqsr1, RSTRQSR1_WDT_RR | RSTRQSR1_SW_RR);
+
+	/* set the BFTIC's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable WD on it */
+	qrio_wdmask(BFTIC4_RST, true);
+
+	/* set the ZL30138's prstcfg to reset at power-up only */
+	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_RST);
+	/* and take it out of reset as soon as possible (needed for Hooper) */
+	qrio_prst(ZL30158_RST, false, false);
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	int ret = 0;
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	set_liodns();
+	setup_qbman_portals();
+
+	ret = trigger_fpga_config();
+	if (ret)
+		printf("error triggering PCIe FPGA config\n");
+
+	/* enable the Unit LED (red) & Boot LED (on) */
+	qrio_set_leds();
+
+	/* enable Application Buffer */
+	qrio_enable_app_buffer();
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(unsigned long dummy)
+{
+	return 66666666;
+}
+
+#define ETH_FRONT_PHY_RST	15
+#define QSFP2_RST		11
+#define QSFP1_RST		10
+#define ZL30343_RST		9
+
+int misc_init_f(void)
+{
+	/* configure QRIO pis for i2c deblocking */
+	i2c_deblock_gpio_cfg();
+
+	/* configure the front phy's prstcfg and take it out of reset */
+	qrio_prstcfg(ETH_FRONT_PHY_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prst(ETH_FRONT_PHY_RST, false, false);
+
+	/* set the ZL30343 prstcfg to reset at power-up only */
+	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_RST);
+	/* and enable the WD on it */
+	qrio_wdmask(ZL30343_RST, true);
+
+	/* set the QSFPs' prstcfg to reset at power-up and unit rst only */
+	qrio_prstcfg(QSFP1_RST, PRSTCFG_POWUP_UNIT_RST);
+	qrio_prstcfg(QSFP2_RST, PRSTCFG_POWUP_UNIT_RST);
+
+	/* and enable the WD on them */
+	qrio_wdmask(QSFP1_RST, true);
+	qrio_wdmask(QSFP2_RST, true);
+
+	return 0;
+}
+
+#define NUM_SRDS_BANKS	2
+
+int misc_init_r(void)
+{
+	serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	u32 expected[NUM_SRDS_BANKS] = {SRDS_PLLCR0_RFCK_SEL_100,
+		SRDS_PLLCR0_RFCK_SEL_125};
+	unsigned int i;
+
+	/* check SERDES reference clocks */
+	for (i = 0; i < NUM_SRDS_BANKS; i++) {
+		u32 actual = in_be32(&regs->bank[i].pllcr0);
+		actual &= SRDS_PLLCR0_RFCK_SEL_MASK;
+		if (actual != expected[i]) {
+			printf("Warning: SERDES bank %u expects reference \
+			       clock %sMHz, but actual is %sMHz\n", i + 1,
+			       serdes_clock_to_string(expected[i]),
+			       serdes_clock_to_string(actual));
+		}
+	}
+
+	ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN,
+			CONFIG_PIGGY_MAC_ADDRESS_OFFSET);
+	return 0;
+}
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var(void)
+{
+	ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_LAST_STAGE_INIT)
+
+int last_stage_init(void)
+{
+#if defined(CONFIG_KMCOGE4)
+	/* on KMCOGE4, the BFTIC4 is on the LBAPP2 */
+	struct bfticu_iomap *bftic4 =
+		(struct bfticu_iomap *)CONFIG_SYS_LBAPP2_BASE;
+	u8 dip_switch = in_8((u8 *)&(bftic4->mswitch)) & BFTICU_DIPSWITCH_MASK;
+
+	if (dip_switch != 0) {
+		/* start bootloader */
+		puts("DIP:   Enabled\n");
+		env_set("actual_bank", "0");
+	}
+#endif
+	set_km_env();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+void fdt_fixup_fman_mac_addresses(void *blob)
+{
+	int node, i, ret;
+	char *tmp, *end;
+	unsigned char mac_addr[6];
+
+	/* get the mac addr from env */
+	tmp = env_get("ethaddr");
+	if (!tmp) {
+		printf("ethaddr env variable not defined\n");
+		return;
+	}
+	for (i = 0; i < 6; i++) {
+		mac_addr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+		if (tmp)
+			tmp = (*end) ? end+1 : end;
+	}
+
+	/* find the correct fdt ethernet path and correct it */
+	node = fdt_path_offset(blob, "/soc/fman/ethernet@e8000");
+	if (node < 0) {
+		printf("no /soc/fman/ethernet path offset\n");
+		return;
+	}
+	ret = fdt_setprop(blob, node, "local-mac-address", &mac_addr, 6);
+	if (ret) {
+		printf("error setting local-mac-address property\n");
+		return;
+	}
+}
+#endif
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = env_get_bootm_low();
+	size = env_get_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+	fsl_fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_fman_mac_addresses(blob);
+#endif
+
+	return 0;
+}
+
+#if defined(CONFIG_POST)
+
+/* DIC26_SELFTEST GPIO used to start factory test sw */
+#define SELFTEST_PORT	QRIO_GPIO_A
+#define SELFTEST_PIN	31
+
+int post_hotkeys_pressed(void)
+{
+	qrio_gpio_direction_input(SELFTEST_PORT, SELFTEST_PIN);
+	return qrio_get_gpio(SELFTEST_PORT, SELFTEST_PIN);
+}
+#endif