diff options
author | 2023-10-10 14:33:42 +0000 | |
---|---|---|
committer | 2023-10-10 14:33:42 +0000 | |
commit | af1a266670d040d2f4083ff309d732d648afba2a (patch) | |
tree | 2fc46203448ddcc6f81546d379abfaeb323575e9 /roms/u-boot/board/phytec/pcl063/README | |
parent | e02cda008591317b1625707ff8e115a4841aa889 (diff) |
Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec
Diffstat (limited to 'roms/u-boot/board/phytec/pcl063/README')
-rw-r--r-- | roms/u-boot/board/phytec/pcl063/README | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/roms/u-boot/board/phytec/pcl063/README b/roms/u-boot/board/phytec/pcl063/README new file mode 100644 index 000000000..be83bdb0d --- /dev/null +++ b/roms/u-boot/board/phytec/pcl063/README @@ -0,0 +1,26 @@ +How to use U-Boot on PHYTEC phyBOARD-i.MX6UL-Segin +-------------------------------------------------- + +- Configure and build U-Boot for phyCORE-i.MX6UL: + + $ make mrproper + $ make phycore_pcl063_defconfig + $ make + + This will generate SPL and u-boot-dtb.img images. + +- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card: + + $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Jumper settings: + + JP1: Open: Boot from NAND + Closed: Boot from SD/MMC1 + +- Connect the Serial cable to UART0 and the PC for the console. + +- Insert the micro SD card in the board and power it up. + +- U-Boot messages should come up. |