Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

7 files changed, 648 insertions, 0 deletions

diff --git a/roms/u-boot/board/technexion/pico-imx7d/Kconfig b/roms/u-boot/board/technexion/pico-imx7d/Kconfig
new file mode 100644
index 000000000..f4ae18ca6
--- /dev/null
+++ b/roms/u-boot/board/technexion/pico-imx7d/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_PICO_IMX7D
+
+config SYS_BOARD
+	default "pico-imx7d"
+
+config SYS_VENDOR
+	default "technexion"
+
+config SYS_SOC
+	default "mx7"
+
+config SYS_CONFIG_NAME
+	default "pico-imx7d"
+
+endif
diff --git a/roms/u-boot/board/technexion/pico-imx7d/MAINTAINERS b/roms/u-boot/board/technexion/pico-imx7d/MAINTAINERS
new file mode 100644
index 000000000..325e1735c
--- /dev/null
+++ b/roms/u-boot/board/technexion/pico-imx7d/MAINTAINERS
@@ -0,0 +1,12 @@
+TechNexion PICO-IMX7D board
+M:	Vanessa Maegima <vanessa.maegima@nxp.com>
+M:	Otavio Salvador <otavio@ossystems.com.br>
+S:	Maintained
+F:	board/technexion/pico-imx7d/
+F:	include/configs/pico-imx7d.h
+F:	configs/pico-imx7d_defconfig
+F:	configs/pico-imx7d_bl33_defconfig
+F:	configs/pico-hobbit-imx7d_defconfig
+F:	configs/pico-pi-imx7d_defconfig
+F:	configs/pico-nymph-imx7d_defconfig
+F:	configs/pico-dwarf-imx7d_defconfig
diff --git a/roms/u-boot/board/technexion/pico-imx7d/Makefile b/roms/u-boot/board/technexion/pico-imx7d/Makefile
new file mode 100644
index 000000000..4ae3d606b
--- /dev/null
+++ b/roms/u-boot/board/technexion/pico-imx7d/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+# (C) Copyright 2017 NXP Semiconductors
+
+obj-y  := pico-imx7d.o spl.o
diff --git a/roms/u-boot/board/technexion/pico-imx7d/README b/roms/u-boot/board/technexion/pico-imx7d/README
new file mode 100644
index 000000000..4d57cdbfa
--- /dev/null
+++ b/roms/u-boot/board/technexion/pico-imx7d/README
@@ -0,0 +1,159 @@
+How to update U-Boot on pico-imx7d board
+----------------------------------------
+
+Required software on the host PC:
+
+- imx_usb_loader: https://github.com/boundarydevices/imx_usb_loader
+
+Build U-Boot for pico:
+
+$ make mrproper
+$ make pico-imx7d_defconfig
+$ make
+
+This generates the SPL and u-boot-dtb.img binaries.
+
+1. Loading U-Boot via USB Serial Download Protocol
+
+Note: This method is convenient for development purposes.
+If the eMMC has already a U-Boot flashed with DFU support then
+the user can go to step 2 below in order to update U-Boot.
+
+Put pico board in USB download mode (refer to the PICO-iMX7D Quick Start Guide
+page 3)
+
+Connect a USB to serial adapter between the host PC and pico.
+
+Connect a USB cable between the OTG pico port and the host PC.
+
+Note: Some computers may be a bit strict with USB current draw and will
+shut down their ports if the draw is too high. The solution for that is
+to use an externally powered USB hub between the board and the host computer.
+
+Open a terminal program such as minicom.
+
+Copy SPL and u-boot-dtb.img to the imx_usb_loader folder.
+
+Load the SPL binary via USB:
+
+$ sudo ./imx_usb SPL
+
+Load the u-boot-dtb.img binary via USB:
+
+$ sudo ./imx_usb u-boot-dtb.img
+
+Then U-Boot starts and its messages appear in the console program.
+
+Use the default environment variables:
+
+=> env default -f -a
+=> saveenv
+
+2. Flashing U-Boot into the eMMC
+
+Run the DFU agent so we can flash the new images using dfu-util tool:
+
+=> dfu 0 mmc 0
+
+Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC:
+
+$ sudo dfu-util -D SPL -a spl
+
+$ sudo dfu-util -D u-boot-dtb.img -a u-boot
+
+Remove power from the pico board.
+
+Put pico board into normal boot mode.
+
+Power up the board and the new updated U-Boot should boot from eMMC.
+
+Booting in Falcon mode
+======================
+
+Generate a uImage kernel:
+
+$ make imx_v6_v7_defconfig (Using the default imx_v6_v7_defconfig configuration
+just for an example. In order to boot faster the user should customize the
+defconfig by only enabling the minimal required drivers).
+
+$ make -j4 uImage LOADADDR=0x80008000
+
+$ cp arch/arm/boot/uImage /tftpboot
+$ cp arch/arm/boot/dts/imx7d-pico-pi.dtb /tftpboot
+
+In the U-Boot prompt:
+
+Setup the server and board IP addresses:
+=> setenv serverip 192.168.0.10
+=> setenv ipaddr 192.168.0.11
+
+Get the dtb file:
+=> tftp ${fdt_addr} imx7d-pico-pi.dtb
+
+Get the kernel:
+=> tftp ${loadaddr} uImage
+
+Write the kernel at 2MB offset:
+=> mmc write ${loadaddr} 0x1000 0x5000
+
+Setup the bootargs:
+=> setenv bootargs 'console=ttymxc4,115200 root=/dev/mmcblk2p1 rootfstype=ext4 rootwait rw'
+
+Prepare args:
+=> spl export fdt ${loadaddr} - ${fdt_addr}
+## Booting kernel from Legacy Image at 80800000 ...
+   Image Name:   Linux-5.2.14
+   Image Type:   ARM Linux Kernel Image (uncompressed)
+   Data Size:    9077544 Bytes = 8.7 MiB
+   Load Address: 80008000
+   Entry Point:  80008000
+   Verifying Checksum ... OK
+## Flattened Device Tree blob at 83000000
+   Booting using the fdt blob at 0x83000000
+   Loading Kernel Image
+   Using Device Tree in place at 83000000, end 8300b615
+subcommand not supported
+subcommand not supported
+   Using Device Tree in place at 83000000, end 8300e615
+Argument image is now in RAM: 0x83000000
+=>
+
+Write 1MB of args data (0x800 sectors) to 1MB offset (0x800 sectors):
+
+=> mmc write ${fdt_addr} 0x800 0x800
+
+In order to boot with Falcon mode, activate the CONFIG_SPL_OS_BOOT
+option in the defconfig
+
+--- a/configs/pico-imx7d_defconfig
++++ b/configs/pico-imx7d_defconfig
+@@ -67,3 +67,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+ CONFIG_CI_UDC=y
+ CONFIG_VIDEO=y
++CONFIG_SPL_OS_BOOT=y
+
+Then rebuild U-Boot:
+
+$ make pico-imx7d_defconfig
+$ make -j4
+
+Launch UMS:
+=> ums 0 mmc 0
+
+Flash the new binaries:
+
+$ sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync
+$ sudo dd if=u-boot-dtb.img  of=/dev/sdX bs=1k seek=69; sync
+
+And then SPL binary will load and jump directly to the kernel:
+
+U-Boot SPL 2019.10-rc3-00284-g001c8ea94a-dirty (Sep 10 2019 - 12:46:01 -0300)
+Trying to boot from MMC1
+[    0.000000] Booting Linux on physical CPU 0x0
+[    0.000000] Linux version 5.2.14 (fabio@fabio-OptiPlex-7010) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #30 SMP Wed Sep 10 12:36:27 -03 2019
+[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
+[    0.000000] CPU: div instructions available: patching division code
+[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+[    0.000000] OF: fdt: Machine model: TechNexion PICO-IMX7D Board and PI baseboard
+...
diff --git a/roms/u-boot/board/technexion/pico-imx7d/README.pico-imx7d_BL33 b/roms/u-boot/board/technexion/pico-imx7d/README.pico-imx7d_BL33
new file mode 100644
index 000000000..1b346093b
--- /dev/null
+++ b/roms/u-boot/board/technexion/pico-imx7d/README.pico-imx7d_BL33
@@ -0,0 +1,44 @@
+This document describes the instruction to build and flash ATF/OPTEE/U-Boot on
+pico-imx7d board. U-Boot is loaded as part of FIP image by ATF in this setup.
+The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure
+world in this case.
+
+- Build u-boot
+    Set environment variable of CROSS_COMPILE for your toolchain
+    $ make pico-imx7d_bl33_defconfig
+    $ make all
+
+- Download and build OPTEE
+    $ git clone git@github.com:OP-TEE/optee_os.git
+    $ make PLATFORM=imx PLATFORM_FLAVOR=mx7dpico_mbl CFG_BOOT_SECONDARY_REQUEST=y ARCH=arm
+
+- Download and build ATF
+    $ git clone https://git.linaro.org/landing-teams/working/mbl/arm-trusted-firmware.git -b linaro-imx7
+    $ make DEBUG=1 PLAT=picopi ARCH=aarch32 ARM_ARCH_MAJOR=7 \
+            CROSS_COMPILE=arm-linux-gnueabihf- LOG_LEVEL=50 V=1 \
+            CRASH_REPORTING=1 AARCH32_SP=optee all
+    Save file content in this link to file pico-imx7d.cfg:
+      http://git.linaro.org/landing-teams/working/mbl/u-boot.git/tree/board/technexion/pico-imx7d/pico-imx7d.cfg?h=linaro-imx
+    $ u-boot/tools/mkimage -n pico-imx7d.cfg -T imximage -e 0x9df00000 -d \
+            build/picopi/debug/bl2.bin bl2.imx
+
+- Create FIP image
+    Create a  fiptool_images/ folder in ATF folder, copy u-boot.bin in u-boot
+folder and tee*.bin in optee out/arm-plat-imx/core/tee/ folder to
+fiptool_images. Run below command in ATF folder to generate FIP image.
+    $ make -C tools/fiptool/
+    $ tools/fiptool/fiptool create --tos-fw fiptool_images/tee-header_v2.bin \
+          --tos-fw-extra1 fiptool_images/tee-pager_v2.bin \
+          --tos-fw-extra2 fiptool_images/tee-pageable_v2.bin \
+          --nt-fw fiptool_images/u-boot.bin \
+          fip.bin
+
+- Burn the images to eMMC for test.
+    Run below command in atf folder:
+    $ dd if=build/picopi/debug/bl2.bin.imx of=/dev/disk/by-id/usb-<your device>  bs=1024 seek=1;sync
+    $ dd if=fip.bin of=/dev/disk/by-id/usb-<your device>  bs=1024 seek=1;sync
+
+- Test
+    Just boot up your board and wait for u-boot start up after ATF's log.
+    For booting Linux in FIT image, please reference the FIT files in
+    u-boot doc/uImage.FIT/ folder.
diff --git a/roms/u-boot/board/technexion/pico-imx7d/pico-imx7d.c b/roms/u-boot/board/technexion/pico-imx7d/pico-imx7d.c
new file mode 100644
index 000000000..2d749dac1
--- /dev/null
+++ b/roms/u-boot/board/technexion/pico-imx7d/pico-imx7d.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 NXP Semiconductors
+ */
+
+#include <init.h>
+#include <net.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx7-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/io.h>
+#include <common.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <power/pmic.h>
+#include <power/pfuze3000_pmic.h>
+#include "../../freescale/common/pfuze.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_DSE_3P3V_49OHM | \
+	PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL    (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
+
+#ifdef CONFIG_SYS_I2C_MXC
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+
+/* I2C4 for PMIC */
+static struct i2c_pads_info i2c_pad_info4 = {
+	.scl = {
+		.i2c_mode = MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL | PC,
+		.gpio_mode = MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 | PC,
+		.gp = IMX_GPIO_NR(6, 16),
+	},
+	.sda = {
+		.i2c_mode = MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA | PC,
+		.gpio_mode = MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 | PC,
+		.gp = IMX_GPIO_NR(6, 17),
+	},
+};
+#endif
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	/* Subtract the defined OPTEE runtime firmware length */
+#ifdef CONFIG_OPTEE_TZDRAM_SIZE
+		gd->ram_size -= CONFIG_OPTEE_TZDRAM_SIZE;
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_POWER
+#define I2C_PMIC	3
+int power_init_board(void)
+{
+	struct pmic *p;
+	int ret;
+	unsigned int reg, rev_id;
+
+	ret = power_pfuze3000_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	p = pmic_get("PFUZE3000");
+	ret = pmic_probe(p);
+	if (ret) {
+		printf("Warning:  Cannot find PMIC PFUZE3000\n");
+		printf("\tPower consumption is not optimized.\n");
+		return 0;
+	}
+
+	pmic_reg_read(p, PFUZE3000_DEVICEID, &reg);
+	pmic_reg_read(p, PFUZE3000_REVID, &rev_id);
+	printf("PMIC:  PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+
+	/* disable Low Power Mode during standby mode */
+	pmic_reg_read(p, PFUZE3000_LDOGCTL, &reg);
+	reg |= 0x1;
+	pmic_reg_write(p, PFUZE3000_LDOGCTL, reg);
+
+	/* SW1A/1B mode set to APS/APS */
+	reg = 0x8;
+	pmic_reg_write(p, PFUZE3000_SW1AMODE, reg);
+	pmic_reg_write(p, PFUZE3000_SW1BMODE, reg);
+
+	/* SW1A/1B standby voltage set to 1.025V */
+	reg = 0xd;
+	pmic_reg_write(p, PFUZE3000_SW1ASTBY, reg);
+	pmic_reg_write(p, PFUZE3000_SW1BSTBY, reg);
+
+	/* decrease SW1B normal voltage to 0.975V */
+	pmic_reg_read(p, PFUZE3000_SW1BVOLT, &reg);
+	reg &= ~0x1f;
+	reg |= PFUZE3000_SW1AB_SETP(975);
+	pmic_reg_write(p, PFUZE3000_SW1BVOLT, reg);
+
+	return 0;
+}
+#endif
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+	MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const uart5_pads[] = {
+	MX7D_PAD_I2C4_SCL__UART5_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX7D_PAD_I2C4_SDA__UART5_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+#ifdef CONFIG_FEC_MXC
+static int setup_fec(void)
+{
+	struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
+		= (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	/* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17] */
+	clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
+			(IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK |
+			IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0);
+
+	return set_clk_enet(ENET_125MHZ);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	unsigned short val;
+
+	/* To enable AR8035 ouput a 125MHz clk from CLK_25M */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
+
+	val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
+	val &= 0xffe7;
+	val |= 0x18;
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
+	val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
+	val |= 0x0100;
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+#endif
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+#ifdef CONFIG_SYS_I2C_MXC
+	setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info4);
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_DM_VIDEO
+void setup_lcd(void)
+{
+	gpio_request(IMX_GPIO_NR(1, 11), "lcd_brightness");
+	gpio_request(IMX_GPIO_NR(1, 6), "lcd_enable");
+	/* Set Brightness to high */
+	gpio_direction_output(IMX_GPIO_NR(1, 11) , 1);
+	/* Set LCD enable to high */
+	gpio_direction_output(IMX_GPIO_NR(1, 6) , 1);
+}
+#endif
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_DM_VIDEO
+	setup_lcd();
+#endif
+#ifdef CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
+
+	set_wdog_reset(wdog);
+
+	/*
+	 * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4),
+	 * since we use PMIC_PWRON to reset the board.
+	 */
+	clrsetbits_le16(&wdog->wcr, 0, 0x10);
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: i.MX7D PICOSOM\n");
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const usb_otg2_pads[] = {
+	MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int board_ehci_hcd_init(int port)
+{
+	switch (port) {
+	case 0:
+		break;
+	case 1:
+		imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
+						 ARRAY_SIZE(usb_otg2_pads));
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
diff --git a/roms/u-boot/board/technexion/pico-imx7d/spl.c b/roms/u-boot/board/technexion/pico-imx7d/spl.c
new file mode 100644
index 000000000..df5f05857
--- /dev/null
+++ b/roms/u-boot/board/technexion/pico-imx7d/spl.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Technexion Ltd.
+ *
+ * Author: Richard Hu <richard.hu@technexion.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <init.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mx7-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch-mx7/mx7-ddr.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/gpio.h>
+#include <fsl_esdhc_imx.h>
+#include <spl.h>
+
+#if defined(CONFIG_SPL_BUILD)
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	/* Break into full U-Boot on 'c' */
+	if (serial_tstc() && serial_getc() == 'c')
+		return 1;
+
+	return 0;
+}
+#endif
+
+static struct ddrc ddrc_regs_val = {
+	.mstr		= 0x01040001,
+	.rfshtmg	= 0x00400046,
+	.init1		= 0x00690000,
+	.init0		= 0x00020083,
+	.init3		= 0x09300004,
+	.init4		= 0x04080000,
+	.init5		= 0x00100004,
+	.rankctl	= 0x0000033F,
+	.dramtmg0	= 0x09081109,
+	.dramtmg1	= 0x0007020d,
+	.dramtmg2	= 0x03040407,
+	.dramtmg3	= 0x00002006,
+	.dramtmg4	= 0x04020205,
+	.dramtmg5	= 0x03030202,
+	.dramtmg8	= 0x00000803,
+	.zqctl0		= 0x00800020,
+	.dfitmg0	= 0x02098204,
+	.dfitmg1	= 0x00030303,
+	.dfiupd0	= 0x80400003,
+	.dfiupd1	= 0x00100020,
+	.dfiupd2	= 0x80100004,
+	.addrmap4	= 0x00000F0F,
+	.odtcfg		= 0x06000604,
+	.odtmap		= 0x00000001,
+	.rfshtmg	= 0x00400046,
+	.dramtmg0	= 0x09081109,
+	.addrmap0	= 0x0000001f,
+	.addrmap1	= 0x00080808,
+	.addrmap4	= 0x00000f0f,
+	.addrmap5	= 0x07070707,
+	.addrmap6	= 0x0f0f0707,
+};
+
+static struct ddrc_mp ddrc_mp_val = {
+	.pctrl_0	= 0x00000001,
+};
+
+static struct ddr_phy ddr_phy_regs_val = {
+	.phy_con0	= 0x17420f40,
+	.phy_con1	= 0x10210100,
+	.phy_con4	= 0x00060807,
+	.mdll_con0	= 0x1010007e,
+	.drvds_con0	= 0x00000d6e,
+	.cmd_sdll_con0	= 0x00000010,
+	.offset_lp_con0	= 0x0000000f,
+	.offset_rd_con0	= 0x08080808,
+	.offset_wr_con0	= 0x08080808,
+};
+
+static struct mx7_calibration calib_param = {
+	.num_val	= 5,
+	.values		= {
+		0x0E407304,
+		0x0E447304,
+		0x0E447306,
+		0x0E447304,
+		0x0E447304,
+	},
+};
+
+static void gpr_init(void)
+{
+	struct iomuxc_gpr_base_regs *gpr_regs =
+		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+	writel(0x4F400005, &gpr_regs->gpr[1]);
+}
+
+static bool is_1g(void)
+{
+	gpio_direction_input(IMX_GPIO_NR(1, 12));
+	return !gpio_get_value(IMX_GPIO_NR(1, 12));
+}
+
+static void ddr_init(void)
+{
+	if (is_1g())
+		ddrc_regs_val.addrmap6	= 0x0f070707;
+
+	mx7_dram_cfg(&ddrc_regs_val, &ddrc_mp_val, &ddr_phy_regs_val,
+		     &calib_param);
+}
+
+void board_init_f(ulong dummy)
+{
+	arch_cpu_init();
+	gpr_init();
+	board_early_init_f();
+	timer_init();
+	preloader_console_init();
+	ddr_init();
+	memset(__bss_start, 0, __bss_end - __bss_start);
+	board_init_r(NULL, 0);
+}
+
+void reset_cpu(void)
+{
+}
+
+#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
+
+static iomux_v3_cfg_t const usdhc3_pads[] = {
+	MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_GPIO1_IO14__GPIO1_IO14 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+	{USDHC3_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	/* Assume uSDHC3 emmc is always present */
+	return 1;
+}
+
+int board_mmc_init(struct bd_info *bis)
+{
+	imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+#endif