Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 154 insertions, 0 deletions

diff --git a/roms/u-boot/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/roms/u-boot/board/theobroma-systems/puma_rk3399/puma-rk3399.c
new file mode 100644
index 000000000..deeba3084
--- /dev/null
+++ b/roms/u-boot/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <init.h>
+#include <log.h>
+#include <misc.h>
+#include <spl.h>
+#include <syscon.h>
+#include <u-boot/crc.h>
+#include <usb.h>
+#include <dm/pinctrl.h>
+#include <dm/uclass-internal.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/periph.h>
+#include <asm/arch-rockchip/misc.h>
+#include <power/regulator.h>
+#include <u-boot/sha256.h>
+
+static void setup_iodomain(void)
+{
+	const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3;
+	struct rk3399_grf_regs *grf =
+	    syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+
+	/*
+	 * Set bit 3 in GRF_IO_VSEL so PCIE_RST# works (pin GPIO4_C6).
+	 * Linux assumes that PCIE_RST# works out of the box as it probes
+	 * PCIe before loading the iodomain driver.
+	 */
+	rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT);
+}
+
+/*
+ * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card.
+ *
+ * If bootsource is uSD-card we can assume that we want to use the
+ * SD-Card instead of the eMMC as first boot_target for distroboot.
+ * We only want to swap the defaults and not any custom environment a
+ * user has set. We exit early if a changed boot_targets environment
+ * is detected.
+ */
+static int setup_boottargets(void)
+{
+	const char *boot_device =
+		ofnode_read_chosen_string("u-boot,spl-boot-device");
+	char *env_default, *env;
+
+	if (!boot_device) {
+		debug("%s: /chosen/u-boot,spl-boot-device not set\n",
+		      __func__);
+		return -1;
+	}
+	debug("%s: booted from %s\n", __func__, boot_device);
+
+	env_default = env_get_default("boot_targets");
+	env = env_get("boot_targets");
+	if (!env) {
+		debug("%s: boot_targets does not exist\n", __func__);
+		return -1;
+	}
+	debug("%s: boot_targets current: %s - default: %s\n",
+	      __func__, env, env_default);
+
+	if (strcmp(env_default, env) != 0) {
+		debug("%s: boot_targets not default, don't change it\n",
+		      __func__);
+		return 0;
+	}
+
+	/*
+	 * Only run, if booting from mmc1 (i.e. /mmc@fe320000) and
+	 * only consider cases where the default boot-order first
+	 * tries to boot from mmc0 (eMMC) and then from mmc1
+	 * (i.e. external SD).
+	 *
+	 * In other words: the SD card will be moved to earlier in the
+	 * order, if U-Boot was also loaded from the SD-card.
+	 */
+	if (!strcmp(boot_device, "/mmc@fe320000")) {
+		char *mmc0, *mmc1;
+
+		debug("%s: booted from SD-Card\n", __func__);
+		mmc0 = strstr(env, "mmc0");
+		mmc1 = strstr(env, "mmc1");
+
+		if (!mmc0 || !mmc1) {
+			debug("%s: only one mmc boot_target found\n", __func__);
+			return -1;
+		}
+
+		/*
+		 * If mmc0 comes first in the boot order, we need to change
+		 * the strings to make mmc1 first.
+		 */
+		if (mmc0 < mmc1) {
+			mmc0[3] = '1';
+			mmc1[3] = '0';
+			debug("%s: set boot_targets to: %s\n", __func__, env);
+			env_set("boot_targets", env);
+		}
+	}
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	const u32 cpuid_offset = 0x7;
+	const u32 cpuid_length = 0x10;
+	u8 cpuid[cpuid_length];
+	int ret;
+
+	ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+	if (ret)
+		return ret;
+
+	ret = rockchip_cpuid_set(cpuid, cpuid_length);
+	if (ret)
+		return ret;
+
+	ret = rockchip_setup_macaddr();
+	if (ret)
+		return ret;
+
+	setup_iodomain();
+	setup_boottargets();
+
+	return 0;
+}
+
+#ifdef CONFIG_SERIAL_TAG
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+	char *serial_string;
+	u64 serial = 0;
+
+	serial_string = env_get("serial#");
+
+	if (serial_string)
+		serial = simple_strtoull(serial_string, NULL, 16);
+
+	serialnr->high = (u32)(serial >> 32);
+	serialnr->low = (u32)(serial & 0xffffffff);
+}
+#endif