Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 456 insertions, 0 deletions

diff --git a/roms/u-boot/cmd/eeprom.c b/roms/u-boot/cmd/eeprom.c
new file mode 100644
index 000000000..b3fd37c82
--- /dev/null
+++ b/roms/u-boot/cmd/eeprom.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ */
+
+/*
+ * Support for read and write access to EEPROM like memory devices. This
+ * includes regular EEPROM as well as  FRAM (ferroelectic nonvolaile RAM).
+ * FRAM devices read and write data at bus speed. In particular, there is no
+ * write delay. Also, there is no limit imposed on the number of bytes that can
+ * be transferred with a single read or write.
+ *
+ * Use the following configuration options to ensure no unneeded performance
+ * degradation (typical for EEPROM) is incured for FRAM memory:
+ *
+ * #define CONFIG_SYS_I2C_FRAM
+ * #undef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
+ *
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <eeprom.h>
+#include <i2c.h>
+#include <eeprom_layout.h>
+#include <linux/delay.h>
+
+#ifndef	CONFIG_SYS_I2C_SPEED
+#define	CONFIG_SYS_I2C_SPEED	50000
+#endif
+
+#ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	0
+#endif
+
+#ifndef CONFIG_SYS_EEPROM_PAGE_WRITE_BITS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	8
+#endif
+
+#ifndef	I2C_RXTX_LEN
+#define I2C_RXTX_LEN	128
+#endif
+
+#define	EEPROM_PAGE_SIZE	(1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)
+#define	EEPROM_PAGE_OFFSET(x)	((x) & (EEPROM_PAGE_SIZE - 1))
+
+/*
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
+ *   0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
+ *
+ * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
+ *   0x00000nxx for EEPROM address selectors and page number at n.
+ */
+#if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
+#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
+	(CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
+	(CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2)
+#error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
+#endif
+#endif
+
+#if CONFIG_IS_ENABLED(DM_I2C)
+static int eeprom_i2c_bus;
+#endif
+
+__weak int eeprom_write_enable(unsigned dev_addr, int state)
+{
+	return 0;
+}
+
+void eeprom_init(int bus)
+{
+	/* I2C EEPROM */
+#if CONFIG_IS_ENABLED(DM_I2C)
+	eeprom_i2c_bus = bus;
+#elif defined(CONFIG_SYS_I2C)
+	if (bus >= 0)
+		i2c_set_bus_num(bus);
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+}
+
+static int eeprom_addr(unsigned dev_addr, unsigned offset, uchar *addr)
+{
+	unsigned blk_off;
+	int alen;
+
+	blk_off = offset & 0xff;	/* block offset */
+#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1
+	addr[0] = offset >> 8;		/* block number */
+	addr[1] = blk_off;		/* block offset */
+	alen = 2;
+#else
+	addr[0] = offset >> 16;		/* block number */
+	addr[1] = offset >>  8;		/* upper address octet */
+	addr[2] = blk_off;		/* lower address octet */
+	alen = 3;
+#endif	/* CONFIG_SYS_I2C_EEPROM_ADDR_LEN */
+
+	addr[0] |= dev_addr;		/* insert device address */
+
+	return alen;
+}
+
+static int eeprom_len(unsigned offset, unsigned end)
+{
+	unsigned len = end - offset;
+
+	/*
+	 * For a FRAM device there is no limit on the number of the
+	 * bytes that can be accessed with the single read or write
+	 * operation.
+	 */
+#if !defined(CONFIG_SYS_I2C_FRAM)
+	unsigned blk_off = offset & 0xff;
+	unsigned maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
+
+	if (maxlen > I2C_RXTX_LEN)
+		maxlen = I2C_RXTX_LEN;
+
+	if (len > maxlen)
+		len = maxlen;
+#endif
+
+	return len;
+}
+
+static int eeprom_rw_block(unsigned offset, uchar *addr, unsigned alen,
+			   uchar *buffer, unsigned len, bool read)
+{
+	int ret = 0;
+
+#if CONFIG_IS_ENABLED(DM_I2C)
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(eeprom_i2c_bus, addr[0],
+				      alen - 1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       eeprom_i2c_bus);
+		return CMD_RET_FAILURE;
+	}
+
+	if (read)
+		ret = dm_i2c_read(dev, offset, buffer, len);
+	else
+		ret = dm_i2c_write(dev, offset, buffer, len);
+
+#else /* Non DM I2C support - will be removed */
+
+	if (read)
+		ret = i2c_read(addr[0], offset, alen - 1, buffer, len);
+	else
+		ret = i2c_write(addr[0], offset, alen - 1, buffer, len);
+#endif /* CONFIG_DM_I2C */
+	if (ret)
+		ret = CMD_RET_FAILURE;
+
+	return ret;
+}
+
+static int eeprom_rw(unsigned dev_addr, unsigned offset, uchar *buffer,
+		     unsigned cnt, bool read)
+{
+	unsigned end = offset + cnt;
+	unsigned alen, len;
+	int rcode = 0;
+	uchar addr[3];
+
+#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
+	eeprom_init(CONFIG_SYS_I2C_EEPROM_BUS);
+#endif
+
+	while (offset < end) {
+		alen = eeprom_addr(dev_addr, offset, addr);
+
+		len = eeprom_len(offset, end);
+
+		rcode = eeprom_rw_block(offset, addr, alen, buffer, len, read);
+
+		buffer += len;
+		offset += len;
+
+		if (!read)
+			udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+	}
+
+	return rcode;
+}
+
+int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+{
+	/*
+	 * Read data until done or would cross a page boundary.
+	 * We must write the address again when changing pages
+	 * because the next page may be in a different device.
+	 */
+	return eeprom_rw(dev_addr, offset, buffer, cnt, 1);
+}
+
+int eeprom_write(unsigned dev_addr, unsigned offset,
+		 uchar *buffer, unsigned cnt)
+{
+	int ret;
+
+	eeprom_write_enable(dev_addr, 1);
+
+	/*
+	 * Write data until done or would cross a write page boundary.
+	 * We must write the address again when changing pages
+	 * because the address counter only increments within a page.
+	 */
+	ret = eeprom_rw(dev_addr, offset, buffer, cnt, 0);
+
+	eeprom_write_enable(dev_addr, 0);
+	return ret;
+}
+
+static int parse_numeric_param(char *str)
+{
+	char *endptr;
+	int value = simple_strtol(str, &endptr, 16);
+
+	return (*endptr != '\0') ? -1 : value;
+}
+
+/**
+ * parse_i2c_bus_addr - parse the i2c bus and i2c devaddr parameters
+ *
+ * @i2c_bus:	address to store the i2c bus
+ * @i2c_addr:	address to store the device i2c address
+ * @argc:	count of command line arguments left to parse
+ * @argv:	command line arguments left to parse
+ * @argc_no_bus_addr:	argc value we expect to see when bus & addr aren't given
+ *
+ * @returns:	number of arguments parsed or CMD_RET_USAGE if error
+ */
+static int parse_i2c_bus_addr(int *i2c_bus, ulong *i2c_addr, int argc,
+			      char *const argv[], int argc_no_bus_addr)
+{
+	int argc_no_bus = argc_no_bus_addr + 1;
+	int argc_bus_addr = argc_no_bus_addr + 2;
+
+#ifdef CONFIG_SYS_DEF_EEPROM_ADDR
+	if (argc == argc_no_bus_addr) {
+		*i2c_bus = -1;
+		*i2c_addr = CONFIG_SYS_DEF_EEPROM_ADDR;
+
+		return 0;
+	}
+#endif
+	if (argc == argc_no_bus) {
+		*i2c_bus = -1;
+		*i2c_addr = parse_numeric_param(argv[0]);
+
+		return 1;
+	}
+
+	if (argc == argc_bus_addr) {
+		*i2c_bus = parse_numeric_param(argv[0]);
+		*i2c_addr = parse_numeric_param(argv[1]);
+
+		return 2;
+	}
+
+	return CMD_RET_USAGE;
+}
+
+#ifdef CONFIG_CMD_EEPROM_LAYOUT
+
+__weak int eeprom_parse_layout_version(char *str)
+{
+	return LAYOUT_VERSION_UNRECOGNIZED;
+}
+
+static unsigned char eeprom_buf[CONFIG_SYS_EEPROM_SIZE];
+
+#endif
+
+enum eeprom_action {
+	EEPROM_READ,
+	EEPROM_WRITE,
+	EEPROM_PRINT,
+	EEPROM_UPDATE,
+	EEPROM_ACTION_INVALID,
+};
+
+static enum eeprom_action parse_action(char *cmd)
+{
+	if (!strncmp(cmd, "read", 4))
+		return EEPROM_READ;
+	if (!strncmp(cmd, "write", 5))
+		return EEPROM_WRITE;
+#ifdef CONFIG_CMD_EEPROM_LAYOUT
+	if (!strncmp(cmd, "print", 5))
+		return EEPROM_PRINT;
+	if (!strncmp(cmd, "update", 6))
+		return EEPROM_UPDATE;
+#endif
+
+	return EEPROM_ACTION_INVALID;
+}
+
+static int eeprom_execute_command(enum eeprom_action action, int i2c_bus,
+				  ulong i2c_addr, int layout_ver, char *key,
+				  char *value, ulong addr, ulong off, ulong cnt)
+{
+	int rcode = 0;
+	const char *const fmt =
+		"\nEEPROM @0x%lX %s: addr 0x%08lx  off 0x%04lx  count %ld ... ";
+#ifdef CONFIG_CMD_EEPROM_LAYOUT
+	struct eeprom_layout layout;
+#endif
+
+	if (action == EEPROM_ACTION_INVALID)
+		return CMD_RET_USAGE;
+
+	eeprom_init(i2c_bus);
+	if (action == EEPROM_READ) {
+		printf(fmt, i2c_addr, "read", addr, off, cnt);
+
+		rcode = eeprom_read(i2c_addr, off, (uchar *)addr, cnt);
+
+		puts("done\n");
+		return rcode;
+	} else if (action == EEPROM_WRITE) {
+		printf(fmt, i2c_addr, "write", addr, off, cnt);
+
+		rcode = eeprom_write(i2c_addr, off, (uchar *)addr, cnt);
+
+		puts("done\n");
+		return rcode;
+	}
+
+#ifdef CONFIG_CMD_EEPROM_LAYOUT
+	rcode = eeprom_read(i2c_addr, 0, eeprom_buf, CONFIG_SYS_EEPROM_SIZE);
+	if (rcode < 0)
+		return rcode;
+
+	eeprom_layout_setup(&layout, eeprom_buf, CONFIG_SYS_EEPROM_SIZE,
+			    layout_ver);
+
+	if (action == EEPROM_PRINT) {
+		layout.print(&layout);
+		return 0;
+	}
+
+	layout.update(&layout, key, value);
+
+	rcode = eeprom_write(i2c_addr, 0, layout.data, CONFIG_SYS_EEPROM_SIZE);
+#endif
+
+	return rcode;
+}
+
+#define NEXT_PARAM(argc, index)	{ (argc)--; (index)++; }
+int do_eeprom(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	int layout_ver = LAYOUT_VERSION_AUTODETECT;
+	enum eeprom_action action = EEPROM_ACTION_INVALID;
+	int i2c_bus = -1, index = 0;
+	ulong i2c_addr = -1, addr = 0, cnt = 0, off = 0;
+	int ret;
+	char *field_name = "";
+	char *field_value = "";
+
+	if (argc <= 1)
+		return CMD_RET_USAGE;
+
+	NEXT_PARAM(argc, index); /* Skip program name */
+
+	action = parse_action(argv[index]);
+	NEXT_PARAM(argc, index);
+
+	if (action == EEPROM_ACTION_INVALID)
+		return CMD_RET_USAGE;
+
+#ifdef CONFIG_CMD_EEPROM_LAYOUT
+	if (action == EEPROM_PRINT || action == EEPROM_UPDATE) {
+		if (!strcmp(argv[index], "-l")) {
+			NEXT_PARAM(argc, index);
+			layout_ver = eeprom_parse_layout_version(argv[index]);
+			NEXT_PARAM(argc, index);
+		}
+	}
+#endif
+
+	switch (action) {
+	case EEPROM_READ:
+	case EEPROM_WRITE:
+		ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc,
+					 argv + index, 3);
+		break;
+	case EEPROM_PRINT:
+		ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc,
+					 argv + index, 0);
+		break;
+	case EEPROM_UPDATE:
+		ret = parse_i2c_bus_addr(&i2c_bus, &i2c_addr, argc,
+					 argv + index, 2);
+		break;
+	default:
+		/* Get compiler to stop whining */
+		return CMD_RET_USAGE;
+	}
+
+	if (ret == CMD_RET_USAGE)
+		return ret;
+
+	while (ret--)
+		NEXT_PARAM(argc, index);
+
+	if (action == EEPROM_READ || action == EEPROM_WRITE) {
+		addr = parse_numeric_param(argv[index]);
+		NEXT_PARAM(argc, index);
+		off = parse_numeric_param(argv[index]);
+		NEXT_PARAM(argc, index);
+		cnt = parse_numeric_param(argv[index]);
+	}
+
+#ifdef CONFIG_CMD_EEPROM_LAYOUT
+	if (action == EEPROM_UPDATE) {
+		field_name = argv[index];
+		NEXT_PARAM(argc, index);
+		field_value = argv[index];
+		NEXT_PARAM(argc, index);
+	}
+#endif
+
+	return eeprom_execute_command(action, i2c_bus, i2c_addr, layout_ver,
+				      field_name, field_value, addr, off, cnt);
+}
+
+U_BOOT_CMD(
+	eeprom,	8,	1,	do_eeprom,
+	"EEPROM sub-system",
+	"read  <bus> <devaddr> addr off cnt\n"
+	"eeprom write <bus> <devaddr> addr off cnt\n"
+	"       - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'"
+#ifdef CONFIG_CMD_EEPROM_LAYOUT
+	"\n"
+	"eeprom print [-l <layout_version>] <bus> <devaddr>\n"
+	"       - Print layout fields and their data in human readable format\n"
+	"eeprom update [-l <layout_version>] <bus> <devaddr> field_name field_value\n"
+	"       - Update a specific eeprom field with new data.\n"
+	"         The new data must be written in the same human readable format as shown by the print command.\n"
+	"\n"
+	"LAYOUT VERSIONS\n"
+	"The -l option can be used to force the command to interpret the EEPROM data using the chosen layout.\n"
+	"If the -l option is omitted, the command will auto detect the layout based on the data in the EEPROM.\n"
+	"The values which can be provided with the -l option are:\n"
+	CONFIG_EEPROM_LAYOUT_HELP_STRING"\n"
+#endif
+)