Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 155 insertions, 0 deletions

diff --git a/roms/u-boot/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt b/roms/u-boot/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
new file mode 100644
index 000000000..929ae88c5
--- /dev/null
+++ b/roms/u-boot/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
@@ -0,0 +1,155 @@
+Intel Bay Trail FSP UPD Binding
+===============================
+
+The device tree node which describes the overriding of the Intel Bay Trail FSP
+UPD data for configuring the SoC.
+
+All properties can be found within the `upd-region` struct in
+arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h, under the same names, and in
+Intel's FSP Binary Configuration Tool for Bay Trail.  This list of properties
+is matched up to Intel's E3800 FSPv4 release.
+
+# Boolean properties:
+
+- fsp,enable-sdio
+- fsp,enable-sdcard
+- fsp,enable-hsuart0
+- fsp,enable-hsuart1
+- fsp,enable-spi
+- fsp,enable-sata
+- fsp,enable-azalia
+- fsp,enable-xhci
+- fsp,enable-dma0
+- fsp,enable-dma1
+- fsp,enable-i2-c0
+- fsp,enable-i2-c1
+- fsp,enable-i2-c2
+- fsp,enable-i2-c3
+- fsp,enable-i2-c4
+- fsp,enable-i2-c5
+- fsp,enable-i2-c6
+- fsp,enable-pwm0
+- fsp,enable-pwm1
+- fsp,enable-hsi
+- fsp,mrc-debug-msg
+- fsp,isp-enable
+- fsp,igd-render-standby
+- fsp,txe-uma-enable
+- fsp,emmc45-ddr50-enabled
+- fsp,emmc45-hs200-enabled
+- fsp,enable-igd
+- fsp,enable-memory-down
+
+If you set "fsp,enable-memory-down" you are strongly encouraged to provide an
+"fsp,memory-down-params{};" to specify how your memory is configured.  If you
+do not set "fsp,enable-memory-down", then the DIMM SPD information will be
+discovered by the FSP and used to setup main memory.
+
+
+# Integer properties:
+
+- fsp,mrc-init-tseg-size
+- fsp,mrc-init-mmio-size
+- fsp,mrc-init-spd-addr1
+- fsp,mrc-init-spd-addr2
+- fsp,emmc-boot-mode
+- fsp,sata-mode
+- fsp,lpe-mode
+- fsp,lpss-sio-mode
+- fsp,igd-dvmt50-pre-alloc
+- fsp,aperture-size
+- fsp,gtt-size
+- fsp,scc-mode
+- fsp,os-selection
+- fsp,emmc45-retune-timer-value
+
+- fsp,memory-down-params {
+
+	# Boolean properties:
+
+	- fsp,dimm-0-enable
+	- fsp,dimm-1-enable
+
+	# Integer properties:
+
+	- fsp,dram-speed
+	- fsp,dram-type
+	- fsp,dimm-width
+	- fsp,dimm-density
+	- fsp,dimm-bus-width
+	- fsp,dimm-sides
+	- fsp,dimm-tcl
+	- fsp,dimm-trpt-rcd
+	- fsp,dimm-twr
+	- fsp,dimm-twtr
+	- fsp,dimm-trrd
+	- fsp,dimm-trtp
+	- fsp,dimm-tfaw
+};
+
+For all integer properties, available options are listed in fsp_configs.h in
+arch/x86/include/asm/arch-baytrail/fsp directory (eg: MRC_INIT_TSEG_SIZE_1MB).
+
+
+Example (from MinnowMax Dual Core):
+-----------------------------------
+
+/ {
+	...
+
+	fsp {
+		compatible = "intel,baytrail-fsp";
+		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
+		fsp,mrc-init-spd-addr1 = <0xa0>;
+		fsp,mrc-init-spd-addr2 = <0xa2>;
+		fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
+		fsp,enable-sdio;
+		fsp,enable-sdcard;
+		fsp,enable-hsuart1;
+		fsp,enable-spi;
+		fsp,enable-sata;
+		fsp,sata-mode = <SATA_MODE_AHCI>;
+		fsp,lpe-mode = <LPE_MODE_PCI>;
+		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
+		fsp,enable-dma0;
+		fsp,enable-dma1;
+		fsp,enable-i2c0;
+		fsp,enable-i2c1;
+		fsp,enable-i2c2;
+		fsp,enable-i2c3;
+		fsp,enable-i2c4;
+		fsp,enable-i2c5;
+		fsp,enable-i2c6;
+		fsp,enable-pwm0;
+		fsp,enable-pwm1;
+		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+		fsp,aperture-size = <APERTURE_SIZE_256MB>;
+		fsp,gtt-size = <GTT_SIZE_2MB>;
+		fsp,scc-mode = <SCC_MODE_PCI>;
+		fsp,os-selection = <OS_SELECTION_LINUX>;
+		fsp,emmc45-ddr50-enabled;
+		fsp,emmc45-retune-timer-value = <8>;
+		fsp,enable-igd;
+		fsp,enable-memory-down;
+		fsp,memory-down-params {
+			compatible = "intel,baytrail-fsp-mdp";
+			fsp,dram-speed = <DRAM_SPEED_1066MTS>;
+			fsp,dram-type = <DRAM_TYPE_DDR3L>;
+			fsp,dimm-0-enable;
+			fsp,dimm-width = <DIMM_WIDTH_X16>;
+			fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+			fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+			fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
+			fsp,dimm-tcl = <0xb>;
+			fsp,dimm-trpt-rcd = <0xb>;
+			fsp,dimm-twr = <0xc>;
+			fsp,dimm-twtr = <6>;
+			fsp,dimm-trrd = <6>;
+			fsp,dimm-trtp = <6>;
+			fsp,dimm-tfaw = <0x14>;
+		};
+	};
+
+	...
+};