Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

6 files changed, 3902 insertions, 0 deletions

diff --git a/roms/u-boot/drivers/mtd/onenand/Makefile b/roms/u-boot/drivers/mtd/onenand/Makefile
new file mode 100644
index 000000000..4dc417a57
--- /dev/null
+++ b/roms/u-boot/drivers/mtd/onenand/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2005-2007 Samsung Electronics.
+# Kyungmin Park <kyungmin.park@samsung.com>
+
+ifndef	CONFIG_SPL_BUILD
+obj-$(CONFIG_CMD_ONENAND)	:= onenand_uboot.o onenand_base.o onenand_bbt.o
+obj-$(CONFIG_SAMSUNG_ONENAND)	+= samsung.o
+else
+obj-y				:= onenand_spl.o
+endif
diff --git a/roms/u-boot/drivers/mtd/onenand/onenand_base.c b/roms/u-boot/drivers/mtd/onenand/onenand_base.c
new file mode 100644
index 000000000..09daa0dd3
--- /dev/null
+++ b/roms/u-boot/drivers/mtd/onenand/onenand_base.c
@@ -0,0 +1,2802 @@
+/*
+ *  linux/drivers/mtd/onenand/onenand_base.c
+ *
+ *  Copyright (C) 2005-2007 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ *  Credits:
+ *      Adrian Hunter <ext-adrian.hunter@nokia.com>:
+ *      auto-placement support, read-while load support, various fixes
+ *      Copyright (C) Nokia Corporation, 2007
+ *
+ *      Rohit Hagargundgi <h.rohit at samsung.com>,
+ *      Amul Kumar Saha <amul.saha@samsung.com>:
+ *      Flex-OneNAND support
+ *      Copyright (C) Samsung Electronics, 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <watchdog.h>
+#include <dm/devres.h>
+#include <linux/bitops.h>
+#include <linux/compat.h>
+#include <linux/mtd/mtd.h>
+#include "linux/mtd/flashchip.h"
+#include <linux/mtd/onenand.h>
+
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <malloc.h>
+
+/* It should access 16-bit instead of 8-bit */
+static void *memcpy_16(void *dst, const void *src, unsigned int len)
+{
+	void *ret = dst;
+	short *d = dst;
+	const short *s = src;
+
+	len >>= 1;
+	while (len-- > 0)
+		*d++ = *s++;
+	return ret;
+}
+
+/**
+ *  onenand_oob_128 - oob info for Flex-Onenand with 4KB page
+ *  For now, we expose only 64 out of 80 ecc bytes
+ */
+static struct nand_ecclayout onenand_oob_128 = {
+	.eccbytes	= 64,
+	.eccpos		= {
+		6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+		22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+		38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+		54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+		70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
+		86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
+		102, 103, 104, 105
+		},
+	.oobfree	= {
+		{2, 4}, {18, 4}, {34, 4}, {50, 4},
+		{66, 4}, {82, 4}, {98, 4}, {114, 4}
+	}
+};
+
+/**
+ * onenand_oob_64 - oob info for large (2KB) page
+ */
+static struct nand_ecclayout onenand_oob_64 = {
+	.eccbytes	= 20,
+	.eccpos		= {
+		8, 9, 10, 11, 12,
+		24, 25, 26, 27, 28,
+		40, 41, 42, 43, 44,
+		56, 57, 58, 59, 60,
+		},
+	.oobfree	= {
+		{2, 3}, {14, 2}, {18, 3}, {30, 2},
+		{34, 3}, {46, 2}, {50, 3}, {62, 2}
+	}
+};
+
+/**
+ * onenand_oob_32 - oob info for middle (1KB) page
+ */
+static struct nand_ecclayout onenand_oob_32 = {
+	.eccbytes	= 10,
+	.eccpos		= {
+		8, 9, 10, 11, 12,
+		24, 25, 26, 27, 28,
+		},
+	.oobfree	= { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
+};
+
+/*
+ * Warning! This array is used with the memcpy_16() function, thus
+ * it must be aligned to 2 bytes. GCC can make this array unaligned
+ * as the array is made of unsigned char, which memcpy16() doesn't
+ * like and will cause unaligned access.
+ */
+static const unsigned char __aligned(2) ffchars[] = {
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 16 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 32 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 48 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 64 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 80 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 96 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 112 */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	/* 128 */
+};
+
+/**
+ * onenand_readw - [OneNAND Interface] Read OneNAND register
+ * @param addr		address to read
+ *
+ * Read OneNAND register
+ */
+static unsigned short onenand_readw(void __iomem * addr)
+{
+	return readw(addr);
+}
+
+/**
+ * onenand_writew - [OneNAND Interface] Write OneNAND register with value
+ * @param value		value to write
+ * @param addr		address to write
+ *
+ * Write OneNAND register with value
+ */
+static void onenand_writew(unsigned short value, void __iomem * addr)
+{
+	writew(value, addr);
+}
+
+/**
+ * onenand_block_address - [DEFAULT] Get block address
+ * @param device	the device id
+ * @param block		the block
+ * @return		translated block address if DDP, otherwise same
+ *
+ * Setup Start Address 1 Register (F100h)
+ */
+static int onenand_block_address(struct onenand_chip *this, int block)
+{
+	/* Device Flash Core select, NAND Flash Block Address */
+	if (block & this->density_mask)
+		return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
+
+	return block;
+}
+
+/**
+ * onenand_bufferram_address - [DEFAULT] Get bufferram address
+ * @param device	the device id
+ * @param block		the block
+ * @return		set DBS value if DDP, otherwise 0
+ *
+ * Setup Start Address 2 Register (F101h) for DDP
+ */
+static int onenand_bufferram_address(struct onenand_chip *this, int block)
+{
+	/* Device BufferRAM Select */
+	if (block & this->density_mask)
+		return ONENAND_DDP_CHIP1;
+
+	return ONENAND_DDP_CHIP0;
+}
+
+/**
+ * onenand_page_address - [DEFAULT] Get page address
+ * @param page		the page address
+ * @param sector	the sector address
+ * @return		combined page and sector address
+ *
+ * Setup Start Address 8 Register (F107h)
+ */
+static int onenand_page_address(int page, int sector)
+{
+	/* Flash Page Address, Flash Sector Address */
+	int fpa, fsa;
+
+	fpa = page & ONENAND_FPA_MASK;
+	fsa = sector & ONENAND_FSA_MASK;
+
+	return ((fpa << ONENAND_FPA_SHIFT) | fsa);
+}
+
+/**
+ * onenand_buffer_address - [DEFAULT] Get buffer address
+ * @param dataram1	DataRAM index
+ * @param sectors	the sector address
+ * @param count		the number of sectors
+ * @return		the start buffer value
+ *
+ * Setup Start Buffer Register (F200h)
+ */
+static int onenand_buffer_address(int dataram1, int sectors, int count)
+{
+	int bsa, bsc;
+
+	/* BufferRAM Sector Address */
+	bsa = sectors & ONENAND_BSA_MASK;
+
+	if (dataram1)
+		bsa |= ONENAND_BSA_DATARAM1;	/* DataRAM1 */
+	else
+		bsa |= ONENAND_BSA_DATARAM0;	/* DataRAM0 */
+
+	/* BufferRAM Sector Count */
+	bsc = count & ONENAND_BSC_MASK;
+
+	return ((bsa << ONENAND_BSA_SHIFT) | bsc);
+}
+
+/**
+ * flexonenand_block - Return block number for flash address
+ * @param this		- OneNAND device structure
+ * @param addr		- Address for which block number is needed
+ */
+static unsigned int flexonenand_block(struct onenand_chip *this, loff_t addr)
+{
+	unsigned int boundary, blk, die = 0;
+
+	if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) {
+		die = 1;
+		addr -= this->diesize[0];
+	}
+
+	boundary = this->boundary[die];
+
+	blk = addr >> (this->erase_shift - 1);
+	if (blk > boundary)
+		blk = (blk + boundary + 1) >> 1;
+
+	blk += die ? this->density_mask : 0;
+	return blk;
+}
+
+unsigned int onenand_block(struct onenand_chip *this, loff_t addr)
+{
+	if (!FLEXONENAND(this))
+		return addr >> this->erase_shift;
+	return flexonenand_block(this, addr);
+}
+
+/**
+ * flexonenand_addr - Return address of the block
+ * @this:		OneNAND device structure
+ * @block:		Block number on Flex-OneNAND
+ *
+ * Return address of the block
+ */
+static loff_t flexonenand_addr(struct onenand_chip *this, int block)
+{
+	loff_t ofs = 0;
+	int die = 0, boundary;
+
+	if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
+		block -= this->density_mask;
+		die = 1;
+		ofs = this->diesize[0];
+	}
+
+	boundary = this->boundary[die];
+	ofs += (loff_t) block << (this->erase_shift - 1);
+	if (block > (boundary + 1))
+		ofs += (loff_t) (block - boundary - 1)
+			<< (this->erase_shift - 1);
+	return ofs;
+}
+
+loff_t onenand_addr(struct onenand_chip *this, int block)
+{
+	if (!FLEXONENAND(this))
+		return (loff_t) block << this->erase_shift;
+	return flexonenand_addr(this, block);
+}
+
+/**
+ * flexonenand_region - [Flex-OneNAND] Return erase region of addr
+ * @param mtd		MTD device structure
+ * @param addr		address whose erase region needs to be identified
+ */
+int flexonenand_region(struct mtd_info *mtd, loff_t addr)
+{
+	int i;
+
+	for (i = 0; i < mtd->numeraseregions; i++)
+		if (addr < mtd->eraseregions[i].offset)
+			break;
+	return i - 1;
+}
+
+/**
+ * onenand_get_density - [DEFAULT] Get OneNAND density
+ * @param dev_id        OneNAND device ID
+ *
+ * Get OneNAND density from device ID
+ */
+static inline int onenand_get_density(int dev_id)
+{
+	int density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+	return (density & ONENAND_DEVICE_DENSITY_MASK);
+}
+
+/**
+ * onenand_command - [DEFAULT] Send command to OneNAND device
+ * @param mtd		MTD device structure
+ * @param cmd		the command to be sent
+ * @param addr		offset to read from or write to
+ * @param len		number of bytes to read or write
+ *
+ * Send command to OneNAND device. This function is used for middle/large page
+ * devices (1KB/2KB Bytes per page)
+ */
+static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr,
+			   size_t len)
+{
+	struct onenand_chip *this = mtd->priv;
+	int value;
+	int block, page;
+
+	/* Now we use page size operation */
+	int sectors = 0, count = 0;
+
+	/* Address translation */
+	switch (cmd) {
+	case ONENAND_CMD_UNLOCK:
+	case ONENAND_CMD_LOCK:
+	case ONENAND_CMD_LOCK_TIGHT:
+	case ONENAND_CMD_UNLOCK_ALL:
+		block = -1;
+		page = -1;
+		break;
+
+	case FLEXONENAND_CMD_PI_ACCESS:
+		/* addr contains die index */
+		block = addr * this->density_mask;
+		page = -1;
+		break;
+
+	case ONENAND_CMD_ERASE:
+	case ONENAND_CMD_BUFFERRAM:
+		block = onenand_block(this, addr);
+		page = -1;
+		break;
+
+	case FLEXONENAND_CMD_READ_PI:
+		cmd = ONENAND_CMD_READ;
+		block = addr * this->density_mask;
+		page = 0;
+		break;
+
+	default:
+		block = onenand_block(this, addr);
+		page = (int) (addr
+			- onenand_addr(this, block)) >> this->page_shift;
+		page &= this->page_mask;
+		break;
+	}
+
+	/* NOTE: The setting order of the registers is very important! */
+	if (cmd == ONENAND_CMD_BUFFERRAM) {
+		/* Select DataRAM for DDP */
+		value = onenand_bufferram_address(this, block);
+		this->write_word(value,
+				 this->base + ONENAND_REG_START_ADDRESS2);
+
+		if (ONENAND_IS_4KB_PAGE(this))
+			ONENAND_SET_BUFFERRAM0(this);
+		else
+			/* Switch to the next data buffer */
+			ONENAND_SET_NEXT_BUFFERRAM(this);
+
+		return 0;
+	}
+
+	if (block != -1) {
+		/* Write 'DFS, FBA' of Flash */
+		value = onenand_block_address(this, block);
+		this->write_word(value,
+				 this->base + ONENAND_REG_START_ADDRESS1);
+
+		/* Select DataRAM for DDP */
+		value = onenand_bufferram_address(this, block);
+		this->write_word(value,
+				 this->base + ONENAND_REG_START_ADDRESS2);
+	}
+
+	if (page != -1) {
+		int dataram;
+
+		switch (cmd) {
+		case FLEXONENAND_CMD_RECOVER_LSB:
+		case ONENAND_CMD_READ:
+		case ONENAND_CMD_READOOB:
+			if (ONENAND_IS_4KB_PAGE(this))
+				dataram = ONENAND_SET_BUFFERRAM0(this);
+			else
+				dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
+
+			break;
+
+		default:
+			dataram = ONENAND_CURRENT_BUFFERRAM(this);
+			break;
+		}
+
+		/* Write 'FPA, FSA' of Flash */
+		value = onenand_page_address(page, sectors);
+		this->write_word(value,
+				 this->base + ONENAND_REG_START_ADDRESS8);
+
+		/* Write 'BSA, BSC' of DataRAM */
+		value = onenand_buffer_address(dataram, sectors, count);
+		this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
+	}
+
+	/* Interrupt clear */
+	this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
+	/* Write command */
+	this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
+
+	return 0;
+}
+
+/**
+ * onenand_read_ecc - return ecc status
+ * @param this		onenand chip structure
+ */
+static int onenand_read_ecc(struct onenand_chip *this)
+{
+	int ecc, i;
+
+	if (!FLEXONENAND(this))
+		return this->read_word(this->base + ONENAND_REG_ECC_STATUS);
+
+	for (i = 0; i < 4; i++) {
+		ecc = this->read_word(this->base
+				+ ((ONENAND_REG_ECC_STATUS + i) << 1));
+		if (likely(!ecc))
+			continue;
+		if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR)
+			return ONENAND_ECC_2BIT_ALL;
+	}
+
+	return 0;
+}
+
+/**
+ * onenand_wait - [DEFAULT] wait until the command is done
+ * @param mtd		MTD device structure
+ * @param state		state to select the max. timeout value
+ *
+ * Wait for command done. This applies to all OneNAND command
+ * Read can take up to 30us, erase up to 2ms and program up to 350us
+ * according to general OneNAND specs
+ */
+static int onenand_wait(struct mtd_info *mtd, int state)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int interrupt = 0;
+	unsigned int ctrl;
+
+	/* Wait at most 20ms ... */
+	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	u32 time_start = get_timer(0);
+	do {
+		WATCHDOG_RESET();
+		if (get_timer(time_start) > timeo)
+			return -EIO;
+		interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+	} while ((interrupt & ONENAND_INT_MASTER) == 0);
+
+	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+
+	if (interrupt & ONENAND_INT_READ) {
+		int ecc = onenand_read_ecc(this);
+		if (ecc & ONENAND_ECC_2BIT_ALL) {
+			printk("onenand_wait: ECC error = 0x%04x\n", ecc);
+			return -EBADMSG;
+		}
+	}
+
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk("onenand_wait: controller error = 0x%04x\n", ctrl);
+		if (ctrl & ONENAND_CTRL_LOCK)
+			printk("onenand_wait: it's locked error = 0x%04x\n",
+				ctrl);
+
+		return -EIO;
+	}
+
+
+	return 0;
+}
+
+/**
+ * onenand_bufferram_offset - [DEFAULT] BufferRAM offset
+ * @param mtd		MTD data structure
+ * @param area		BufferRAM area
+ * @return		offset given area
+ *
+ * Return BufferRAM offset given area
+ */
+static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
+{
+	struct onenand_chip *this = mtd->priv;
+
+	if (ONENAND_CURRENT_BUFFERRAM(this)) {
+		if (area == ONENAND_DATARAM)
+			return mtd->writesize;
+		if (area == ONENAND_SPARERAM)
+			return mtd->oobsize;
+	}
+
+	return 0;
+}
+
+/**
+ * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
+ * @param mtd		MTD data structure
+ * @param area		BufferRAM area
+ * @param buffer	the databuffer to put/get data
+ * @param offset	offset to read from or write to
+ * @param count		number of bytes to read/write
+ *
+ * Read the BufferRAM area
+ */
+static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				  unsigned char *buffer, int offset,
+				  size_t count)
+{
+	struct onenand_chip *this = mtd->priv;
+	void __iomem *bufferram;
+
+	bufferram = this->base + area;
+	bufferram += onenand_bufferram_offset(mtd, area);
+
+	memcpy_16(buffer, bufferram + offset, count);
+
+	return 0;
+}
+
+/**
+ * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
+ * @param mtd		MTD data structure
+ * @param area		BufferRAM area
+ * @param buffer	the databuffer to put/get data
+ * @param offset	offset to read from or write to
+ * @param count		number of bytes to read/write
+ *
+ * Read the BufferRAM area with Sync. Burst Mode
+ */
+static int onenand_sync_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				       unsigned char *buffer, int offset,
+				       size_t count)
+{
+	struct onenand_chip *this = mtd->priv;
+	void __iomem *bufferram;
+
+	bufferram = this->base + area;
+	bufferram += onenand_bufferram_offset(mtd, area);
+
+	this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
+
+	memcpy_16(buffer, bufferram + offset, count);
+
+	this->mmcontrol(mtd, 0);
+
+	return 0;
+}
+
+/**
+ * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
+ * @param mtd		MTD data structure
+ * @param area		BufferRAM area
+ * @param buffer	the databuffer to put/get data
+ * @param offset	offset to read from or write to
+ * @param count		number of bytes to read/write
+ *
+ * Write the BufferRAM area
+ */
+static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				   const unsigned char *buffer, int offset,
+				   size_t count)
+{
+	struct onenand_chip *this = mtd->priv;
+	void __iomem *bufferram;
+
+	bufferram = this->base + area;
+	bufferram += onenand_bufferram_offset(mtd, area);
+
+	memcpy_16(bufferram + offset, buffer, count);
+
+	return 0;
+}
+
+/**
+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
+ * @param mtd		MTD data structure
+ * @param addr		address to check
+ * @return		blockpage address
+ *
+ * Get blockpage address at 2x program mode
+ */
+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
+{
+	struct onenand_chip *this = mtd->priv;
+	int blockpage, block, page;
+
+	/* Calculate the even block number */
+	block = (int) (addr >> this->erase_shift) & ~1;
+	/* Is it the odd plane? */
+	if (addr & this->writesize)
+		block++;
+	page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
+	blockpage = (block << 7) | page;
+
+	return blockpage;
+}
+
+/**
+ * onenand_check_bufferram - [GENERIC] Check BufferRAM information
+ * @param mtd		MTD data structure
+ * @param addr		address to check
+ * @return		1 if there are valid data, otherwise 0
+ *
+ * Check bufferram if there is data we required
+ */
+static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
+{
+	struct onenand_chip *this = mtd->priv;
+	int blockpage, found = 0;
+	unsigned int i;
+
+	if (ONENAND_IS_2PLANE(this))
+		blockpage = onenand_get_2x_blockpage(mtd, addr);
+	else
+		blockpage = (int) (addr >> this->page_shift);
+
+	/* Is there valid data? */
+	i = ONENAND_CURRENT_BUFFERRAM(this);
+	if (this->bufferram[i].blockpage == blockpage)
+		found = 1;
+	else {
+		/* Check another BufferRAM */
+		i = ONENAND_NEXT_BUFFERRAM(this);
+		if (this->bufferram[i].blockpage == blockpage) {
+			ONENAND_SET_NEXT_BUFFERRAM(this);
+			found = 1;
+		}
+	}
+
+	if (found && ONENAND_IS_DDP(this)) {
+		/* Select DataRAM for DDP */
+		int block = onenand_block(this, addr);
+		int value = onenand_bufferram_address(this, block);
+		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+	}
+
+	return found;
+}
+
+/**
+ * onenand_update_bufferram - [GENERIC] Update BufferRAM information
+ * @param mtd		MTD data structure
+ * @param addr		address to update
+ * @param valid		valid flag
+ *
+ * Update BufferRAM information
+ */
+static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
+				    int valid)
+{
+	struct onenand_chip *this = mtd->priv;
+	int blockpage;
+	unsigned int i;
+
+	if (ONENAND_IS_2PLANE(this))
+		blockpage = onenand_get_2x_blockpage(mtd, addr);
+	else
+		blockpage = (int)(addr >> this->page_shift);
+
+	/* Invalidate another BufferRAM */
+	i = ONENAND_NEXT_BUFFERRAM(this);
+	if (this->bufferram[i].blockpage == blockpage)
+		this->bufferram[i].blockpage = -1;
+
+	/* Update BufferRAM */
+	i = ONENAND_CURRENT_BUFFERRAM(this);
+	if (valid)
+		this->bufferram[i].blockpage = blockpage;
+	else
+		this->bufferram[i].blockpage = -1;
+
+	return 0;
+}
+
+/**
+ * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
+ * @param mtd           MTD data structure
+ * @param addr          start address to invalidate
+ * @param len           length to invalidate
+ *
+ * Invalidate BufferRAM information
+ */
+static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
+					 unsigned int len)
+{
+	struct onenand_chip *this = mtd->priv;
+	int i;
+	loff_t end_addr = addr + len;
+
+	/* Invalidate BufferRAM */
+	for (i = 0; i < MAX_BUFFERRAM; i++) {
+		loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
+
+		if (buf_addr >= addr && buf_addr < end_addr)
+			this->bufferram[i].blockpage = -1;
+	}
+}
+
+/**
+ * onenand_get_device - [GENERIC] Get chip for selected access
+ * @param mtd		MTD device structure
+ * @param new_state	the state which is requested
+ *
+ * Get the device and lock it for exclusive access
+ */
+static void onenand_get_device(struct mtd_info *mtd, int new_state)
+{
+	/* Do nothing */
+}
+
+/**
+ * onenand_release_device - [GENERIC] release chip
+ * @param mtd		MTD device structure
+ *
+ * Deselect, release chip lock and wake up anyone waiting on the device
+ */
+static void onenand_release_device(struct mtd_info *mtd)
+{
+	/* Do nothing */
+}
+
+/**
+ * onenand_transfer_auto_oob - [INTERN] oob auto-placement transfer
+ * @param mtd		MTD device structure
+ * @param buf		destination address
+ * @param column	oob offset to read from
+ * @param thislen	oob length to read
+ */
+static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf,
+					int column, int thislen)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct nand_oobfree *free;
+	int readcol = column;
+	int readend = column + thislen;
+	int lastgap = 0;
+	unsigned int i;
+	uint8_t *oob_buf = this->oob_buf;
+
+	free = this->ecclayout->oobfree;
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
+		if (readcol >= lastgap)
+			readcol += free->offset - lastgap;
+		if (readend >= lastgap)
+			readend += free->offset - lastgap;
+		lastgap = free->offset + free->length;
+	}
+	this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+	free = this->ecclayout->oobfree;
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
+		int free_end = free->offset + free->length;
+		if (free->offset < readend && free_end > readcol) {
+			int st = max_t(int,free->offset,readcol);
+			int ed = min_t(int,free_end,readend);
+			int n = ed - st;
+			memcpy(buf, oob_buf + st, n);
+			buf += n;
+		} else if (column == 0)
+			break;
+	}
+	return 0;
+}
+
+/**
+ * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
+ * @param mtd		MTD device structure
+ * @param addr		address to recover
+ * @param status	return value from onenand_wait
+ *
+ * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
+ * lower page address and MSB page has higher page address in paired pages.
+ * If power off occurs during MSB page program, the paired LSB page data can
+ * become corrupt. LSB page recovery read is a way to read LSB page though page
+ * data are corrupted. When uncorrectable error occurs as a result of LSB page
+ * read after power up, issue LSB page recovery read.
+ */
+static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
+{
+	struct onenand_chip *this = mtd->priv;
+	int i;
+
+	/* Recovery is only for Flex-OneNAND */
+	if (!FLEXONENAND(this))
+		return status;
+
+	/* check if we failed due to uncorrectable error */
+	if (!mtd_is_eccerr(status) && status != ONENAND_BBT_READ_ECC_ERROR)
+		return status;
+
+	/* check if address lies in MLC region */
+	i = flexonenand_region(mtd, addr);
+	if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift))
+		return status;
+
+	printk("onenand_recover_lsb:"
+		"Attempting to recover from uncorrectable read\n");
+
+	/* Issue the LSB page recovery command */
+	this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
+	return this->wait(mtd, FL_READING);
+}
+
+/**
+ * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
+ * @param mtd		MTD device structure
+ * @param from		offset to read from
+ * @param ops		oob operation description structure
+ *
+ * OneNAND read main and/or out-of-band data
+ */
+static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
+		struct mtd_oob_ops *ops)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct mtd_ecc_stats stats;
+	size_t len = ops->len;
+	size_t ooblen = ops->ooblen;
+	u_char *buf = ops->datbuf;
+	u_char *oobbuf = ops->oobbuf;
+	int read = 0, column, thislen;
+	int oobread = 0, oobcolumn, thisooblen, oobsize;
+	int ret = 0, boundary = 0;
+	int writesize = this->writesize;
+
+	pr_debug("onenand_read_ops_nolock: from = 0x%08x, len = %i\n",
+		 (unsigned int) from, (int) len);
+
+	if (ops->mode == MTD_OPS_AUTO_OOB)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	oobcolumn = from & (mtd->oobsize - 1);
+
+	/* Do not allow reads past end of device */
+	if ((from + len) > mtd->size) {
+		printk(KERN_ERR "onenand_read_ops_nolock: Attempt read beyond end of device\n");
+		ops->retlen = 0;
+		ops->oobretlen = 0;
+		return -EINVAL;
+	}
+
+	stats = mtd->ecc_stats;
+
+	/* Read-while-load method */
+	/* Note: We can't use this feature in MLC */
+
+	/* Do first load to bufferRAM */
+	if (read < len) {
+		if (!onenand_check_bufferram(mtd, from)) {
+			this->main_buf = buf;
+			this->command(mtd, ONENAND_CMD_READ, from, writesize);
+			ret = this->wait(mtd, FL_READING);
+			if (unlikely(ret))
+				ret = onenand_recover_lsb(mtd, from, ret);
+			onenand_update_bufferram(mtd, from, !ret);
+			if (ret == -EBADMSG)
+				ret = 0;
+		}
+	}
+
+	thislen = min_t(int, writesize, len - read);
+	column = from & (writesize - 1);
+	if (column + thislen > writesize)
+		thislen = writesize - column;
+
+	while (!ret) {
+		/* If there is more to load then start next load */
+		from += thislen;
+		if (!ONENAND_IS_4KB_PAGE(this) && read + thislen < len) {
+			this->main_buf = buf + thislen;
+			this->command(mtd, ONENAND_CMD_READ, from, writesize);
+			/*
+			 * Chip boundary handling in DDP
+			 * Now we issued chip 1 read and pointed chip 1
+			 * bufferam so we have to point chip 0 bufferam.
+			 */
+			if (ONENAND_IS_DDP(this) &&
+					unlikely(from == (this->chipsize >> 1))) {
+				this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
+				boundary = 1;
+			} else
+				boundary = 0;
+			ONENAND_SET_PREV_BUFFERRAM(this);
+		}
+
+		/* While load is going, read from last bufferRAM */
+		this->read_bufferram(mtd, from - thislen, ONENAND_DATARAM, buf, column, thislen);
+
+		/* Read oob area if needed */
+		if (oobbuf) {
+			thisooblen = oobsize - oobcolumn;
+			thisooblen = min_t(int, thisooblen, ooblen - oobread);
+
+			if (ops->mode == MTD_OPS_AUTO_OOB)
+				onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
+			else
+				this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
+			oobread += thisooblen;
+			oobbuf += thisooblen;
+			oobcolumn = 0;
+		}
+
+		if (ONENAND_IS_4KB_PAGE(this) && (read + thislen < len)) {
+			this->command(mtd, ONENAND_CMD_READ, from, writesize);
+			ret = this->wait(mtd, FL_READING);
+			if (unlikely(ret))
+				ret = onenand_recover_lsb(mtd, from, ret);
+			onenand_update_bufferram(mtd, from, !ret);
+			if (mtd_is_eccerr(ret))
+				ret = 0;
+		}
+
+		/* See if we are done */
+		read += thislen;
+		if (read == len)
+			break;
+		/* Set up for next read from bufferRAM */
+		if (unlikely(boundary))
+			this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
+		if (!ONENAND_IS_4KB_PAGE(this))
+			ONENAND_SET_NEXT_BUFFERRAM(this);
+		buf += thislen;
+		thislen = min_t(int, writesize, len - read);
+		column = 0;
+
+		if (!ONENAND_IS_4KB_PAGE(this)) {
+			/* Now wait for load */
+			ret = this->wait(mtd, FL_READING);
+			onenand_update_bufferram(mtd, from, !ret);
+			if (mtd_is_eccerr(ret))
+				ret = 0;
+		}
+	}
+
+	/*
+	 * Return success, if no ECC failures, else -EBADMSG
+	 * fs driver will take care of that, because
+	 * retlen == desired len and result == -EBADMSG
+	 */
+	ops->retlen = read;
+	ops->oobretlen = oobread;
+
+	if (ret)
+		return ret;
+
+	if (mtd->ecc_stats.failed - stats.failed)
+		return -EBADMSG;
+
+	/* return max bitflips per ecc step; ONENANDs correct 1 bit only */
+	return mtd->ecc_stats.corrected != stats.corrected ? 1 : 0;
+}
+
+/**
+ * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band
+ * @param mtd		MTD device structure
+ * @param from		offset to read from
+ * @param ops		oob operation description structure
+ *
+ * OneNAND read out-of-band data from the spare area
+ */
+static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
+		struct mtd_oob_ops *ops)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct mtd_ecc_stats stats;
+	int read = 0, thislen, column, oobsize;
+	size_t len = ops->ooblen;
+	unsigned int mode = ops->mode;
+	u_char *buf = ops->oobbuf;
+	int ret = 0, readcmd;
+
+	from += ops->ooboffs;
+
+	pr_debug("onenand_read_oob_nolock: from = 0x%08x, len = %i\n",
+		 (unsigned int) from, (int) len);
+
+	/* Initialize return length value */
+	ops->oobretlen = 0;
+
+	if (mode == MTD_OPS_AUTO_OOB)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	column = from & (mtd->oobsize - 1);
+
+	if (unlikely(column >= oobsize)) {
+		printk(KERN_ERR "onenand_read_oob_nolock: Attempted to start read outside oob\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(from >= mtd->size ||
+		column + len > ((mtd->size >> this->page_shift) -
+				(from >> this->page_shift)) * oobsize)) {
+		printk(KERN_ERR "onenand_read_oob_nolock: Attempted to read beyond end of device\n");
+		return -EINVAL;
+	}
+
+	stats = mtd->ecc_stats;
+
+	readcmd = ONENAND_IS_4KB_PAGE(this) ?
+		ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
+	while (read < len) {
+		thislen = oobsize - column;
+		thislen = min_t(int, thislen, len);
+
+		this->spare_buf = buf;
+		this->command(mtd, readcmd, from, mtd->oobsize);
+
+		onenand_update_bufferram(mtd, from, 0);
+
+		ret = this->wait(mtd, FL_READING);
+		if (unlikely(ret))
+			ret = onenand_recover_lsb(mtd, from, ret);
+
+		if (ret && ret != -EBADMSG) {
+			printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret);
+			break;
+		}
+
+		if (mode == MTD_OPS_AUTO_OOB)
+			onenand_transfer_auto_oob(mtd, buf, column, thislen);
+		else
+			this->read_bufferram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen);
+
+		read += thislen;
+
+		if (read == len)
+			break;
+
+		buf += thislen;
+
+		/* Read more? */
+		if (read < len) {
+			/* Page size */
+			from += mtd->writesize;
+			column = 0;
+		}
+	}
+
+	ops->oobretlen = read;
+
+	if (ret)
+		return ret;
+
+	if (mtd->ecc_stats.failed - stats.failed)
+		return -EBADMSG;
+
+	return 0;
+}
+
+/**
+ * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc
+ * @param mtd		MTD device structure
+ * @param from		offset to read from
+ * @param len		number of bytes to read
+ * @param retlen	pointer to variable to store the number of read bytes
+ * @param buf		the databuffer to put data
+ *
+ * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL
+*/
+int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
+		 size_t * retlen, u_char * buf)
+{
+	struct mtd_oob_ops ops = {
+		.len    = len,
+		.ooblen = 0,
+		.datbuf = buf,
+		.oobbuf = NULL,
+	};
+	int ret;
+
+	onenand_get_device(mtd, FL_READING);
+	ret = onenand_read_ops_nolock(mtd, from, &ops);
+	onenand_release_device(mtd);
+
+	*retlen = ops.retlen;
+	return ret;
+}
+
+/**
+ * onenand_read_oob - [MTD Interface] OneNAND read out-of-band
+ * @param mtd		MTD device structure
+ * @param from		offset to read from
+ * @param ops		oob operations description structure
+ *
+ * OneNAND main and/or out-of-band
+ */
+int onenand_read_oob(struct mtd_info *mtd, loff_t from,
+			struct mtd_oob_ops *ops)
+{
+	int ret;
+
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+		break;
+	case MTD_OPS_RAW:
+		/* Not implemented yet */
+	default:
+		return -EINVAL;
+	}
+
+	onenand_get_device(mtd, FL_READING);
+	if (ops->datbuf)
+		ret = onenand_read_ops_nolock(mtd, from, ops);
+	else
+		ret = onenand_read_oob_nolock(mtd, from, ops);
+	onenand_release_device(mtd);
+
+	return ret;
+}
+
+/**
+ * onenand_bbt_wait - [DEFAULT] wait until the command is done
+ * @param mtd		MTD device structure
+ * @param state		state to select the max. timeout value
+ *
+ * Wait for command done.
+ */
+static int onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int interrupt;
+	unsigned int ctrl;
+
+	/* Wait at most 20ms ... */
+	u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	u32 time_start = get_timer(0);
+	do {
+		WATCHDOG_RESET();
+		if (get_timer(time_start) > timeo)
+			return ONENAND_BBT_READ_FATAL_ERROR;
+		interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+	} while ((interrupt & ONENAND_INT_MASTER) == 0);
+
+	/* To get correct interrupt status in timeout case */
+	interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
+	ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
+
+	if (interrupt & ONENAND_INT_READ) {
+		int ecc = onenand_read_ecc(this);
+		if (ecc & ONENAND_ECC_2BIT_ALL) {
+			printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x"
+				", controller = 0x%04x\n", ecc, ctrl);
+			return ONENAND_BBT_READ_ERROR;
+		}
+	} else {
+		printk(KERN_ERR "onenand_bbt_wait: read timeout!"
+				"ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
+		return ONENAND_BBT_READ_FATAL_ERROR;
+	}
+
+	/* Initial bad block case: 0x2400 or 0x0400 */
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		printk(KERN_DEBUG "onenand_bbt_wait: controller error = 0x%04x\n", ctrl);
+		return ONENAND_BBT_READ_ERROR;
+	}
+
+	return 0;
+}
+
+/**
+ * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
+ * @param mtd		MTD device structure
+ * @param from		offset to read from
+ * @param ops		oob operation description structure
+ *
+ * OneNAND read out-of-band data from the spare area for bbt scan
+ */
+int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+		struct mtd_oob_ops *ops)
+{
+	struct onenand_chip *this = mtd->priv;
+	int read = 0, thislen, column;
+	int ret = 0, readcmd;
+	size_t len = ops->ooblen;
+	u_char *buf = ops->oobbuf;
+
+	pr_debug("onenand_bbt_read_oob: from = 0x%08x, len = %zi\n",
+		 (unsigned int) from, len);
+
+	readcmd = ONENAND_IS_4KB_PAGE(this) ?
+		ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
+	/* Initialize return value */
+	ops->oobretlen = 0;
+
+	/* Do not allow reads past end of device */
+	if (unlikely((from + len) > mtd->size)) {
+		printk(KERN_ERR "onenand_bbt_read_oob: Attempt read beyond end of device\n");
+		return ONENAND_BBT_READ_FATAL_ERROR;
+	}
+
+	/* Grab the lock and see if the device is available */
+	onenand_get_device(mtd, FL_READING);
+
+	column = from & (mtd->oobsize - 1);
+
+	while (read < len) {
+
+		thislen = mtd->oobsize - column;
+		thislen = min_t(int, thislen, len);
+
+		this->spare_buf = buf;
+		this->command(mtd, readcmd, from, mtd->oobsize);
+
+		onenand_update_bufferram(mtd, from, 0);
+
+		ret = this->bbt_wait(mtd, FL_READING);
+		if (unlikely(ret))
+			ret = onenand_recover_lsb(mtd, from, ret);
+
+		if (ret)
+			break;
+
+		this->read_bufferram(mtd, 0, ONENAND_SPARERAM, buf, column, thislen);
+		read += thislen;
+		if (read == len)
+			break;
+
+		buf += thislen;
+
+		/* Read more? */
+		if (read < len) {
+			/* Update Page size */
+			from += this->writesize;
+			column = 0;
+		}
+	}
+
+	/* Deselect and wake up anyone waiting on the device */
+	onenand_release_device(mtd);
+
+	ops->oobretlen = read;
+	return ret;
+}
+
+
+#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
+/**
+ * onenand_verify_oob - [GENERIC] verify the oob contents after a write
+ * @param mtd           MTD device structure
+ * @param buf           the databuffer to verify
+ * @param to            offset to read from
+ */
+static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
+{
+	struct onenand_chip *this = mtd->priv;
+	u_char *oob_buf = this->oob_buf;
+	int status, i, readcmd;
+
+	readcmd = ONENAND_IS_4KB_PAGE(this) ?
+		ONENAND_CMD_READ : ONENAND_CMD_READOOB;
+
+	this->command(mtd, readcmd, to, mtd->oobsize);
+	onenand_update_bufferram(mtd, to, 0);
+	status = this->wait(mtd, FL_READING);
+	if (status)
+		return status;
+
+	this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
+	for (i = 0; i < mtd->oobsize; i++)
+		if (buf[i] != 0xFF && buf[i] != oob_buf[i])
+			return -EBADMSG;
+
+	return 0;
+}
+
+/**
+ * onenand_verify - [GENERIC] verify the chip contents after a write
+ * @param mtd          MTD device structure
+ * @param buf          the databuffer to verify
+ * @param addr         offset to read from
+ * @param len          number of bytes to read and compare
+ */
+static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
+{
+	struct onenand_chip *this = mtd->priv;
+	void __iomem *dataram;
+	int ret = 0;
+	int thislen, column;
+
+	while (len != 0) {
+		thislen = min_t(int, this->writesize, len);
+		column = addr & (this->writesize - 1);
+		if (column + thislen > this->writesize)
+			thislen = this->writesize - column;
+
+		this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
+
+		onenand_update_bufferram(mtd, addr, 0);
+
+		ret = this->wait(mtd, FL_READING);
+		if (ret)
+			return ret;
+
+		onenand_update_bufferram(mtd, addr, 1);
+
+		dataram = this->base + ONENAND_DATARAM;
+		dataram += onenand_bufferram_offset(mtd, ONENAND_DATARAM);
+
+		if (memcmp(buf, dataram + column, thislen))
+			return -EBADMSG;
+
+		len -= thislen;
+		buf += thislen;
+		addr += thislen;
+	}
+
+	return 0;
+}
+#else
+#define onenand_verify(...)             (0)
+#define onenand_verify_oob(...)         (0)
+#endif
+
+#define NOTALIGNED(x)	((x & (this->subpagesize - 1)) != 0)
+
+/**
+ * onenand_fill_auto_oob - [INTERN] oob auto-placement transfer
+ * @param mtd           MTD device structure
+ * @param oob_buf       oob buffer
+ * @param buf           source address
+ * @param column        oob offset to write to
+ * @param thislen       oob length to write
+ */
+static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
+		const u_char *buf, int column, int thislen)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct nand_oobfree *free;
+	int writecol = column;
+	int writeend = column + thislen;
+	int lastgap = 0;
+	unsigned int i;
+
+	free = this->ecclayout->oobfree;
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
+		if (writecol >= lastgap)
+			writecol += free->offset - lastgap;
+		if (writeend >= lastgap)
+			writeend += free->offset - lastgap;
+		lastgap = free->offset + free->length;
+	}
+	free = this->ecclayout->oobfree;
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length;
+	     i++, free++) {
+		int free_end = free->offset + free->length;
+		if (free->offset < writeend && free_end > writecol) {
+			int st = max_t(int,free->offset,writecol);
+			int ed = min_t(int,free_end,writeend);
+			int n = ed - st;
+			memcpy(oob_buf + st, buf, n);
+			buf += n;
+		} else if (column == 0)
+			break;
+	}
+	return 0;
+}
+
+/**
+ * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band
+ * @param mtd           MTD device structure
+ * @param to            offset to write to
+ * @param ops           oob operation description structure
+ *
+ * Write main and/or oob with ECC
+ */
+static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
+		struct mtd_oob_ops *ops)
+{
+	struct onenand_chip *this = mtd->priv;
+	int written = 0, column, thislen, subpage;
+	int oobwritten = 0, oobcolumn, thisooblen, oobsize;
+	size_t len = ops->len;
+	size_t ooblen = ops->ooblen;
+	const u_char *buf = ops->datbuf;
+	const u_char *oob = ops->oobbuf;
+	u_char *oobbuf;
+	int ret = 0;
+
+	pr_debug("onenand_write_ops_nolock: to = 0x%08x, len = %i\n",
+		 (unsigned int) to, (int) len);
+
+	/* Initialize retlen, in case of early exit */
+	ops->retlen = 0;
+	ops->oobretlen = 0;
+
+	/* Reject writes, which are not page aligned */
+	if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
+		printk(KERN_ERR "onenand_write_ops_nolock: Attempt to write not page aligned data\n");
+		return -EINVAL;
+	}
+
+	if (ops->mode == MTD_OPS_AUTO_OOB)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	oobcolumn = to & (mtd->oobsize - 1);
+
+	column = to & (mtd->writesize - 1);
+
+	/* Loop until all data write */
+	while (written < len) {
+		u_char *wbuf = (u_char *) buf;
+
+		thislen = min_t(int, mtd->writesize - column, len - written);
+		thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten);
+
+		this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
+
+		/* Partial page write */
+		subpage = thislen < mtd->writesize;
+		if (subpage) {
+			memset(this->page_buf, 0xff, mtd->writesize);
+			memcpy(this->page_buf + column, buf, thislen);
+			wbuf = this->page_buf;
+		}
+
+		this->write_bufferram(mtd, to, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
+
+		if (oob) {
+			oobbuf = this->oob_buf;
+
+			/* We send data to spare ram with oobsize
+			 *                          * to prevent byte access */
+			memset(oobbuf, 0xff, mtd->oobsize);
+			if (ops->mode == MTD_OPS_AUTO_OOB)
+				onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
+			else
+				memcpy(oobbuf + oobcolumn, oob, thisooblen);
+
+			oobwritten += thisooblen;
+			oob += thisooblen;
+			oobcolumn = 0;
+		} else
+			oobbuf = (u_char *) ffchars;
+
+		this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+
+		this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
+
+		ret = this->wait(mtd, FL_WRITING);
+
+		/* In partial page write we don't update bufferram */
+		onenand_update_bufferram(mtd, to, !ret && !subpage);
+		if (ONENAND_IS_2PLANE(this)) {
+			ONENAND_SET_BUFFERRAM1(this);
+			onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
+		}
+
+		if (ret) {
+			printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+			break;
+		}
+
+		/* Only check verify write turn on */
+		ret = onenand_verify(mtd, buf, to, thislen);
+		if (ret) {
+			printk(KERN_ERR "onenand_write_ops_nolock: verify failed %d\n", ret);
+			break;
+		}
+
+		written += thislen;
+
+		if (written == len)
+			break;
+
+		column = 0;
+		to += thislen;
+		buf += thislen;
+	}
+
+	ops->retlen = written;
+
+	return ret;
+}
+
+/**
+ * onenand_write_oob_nolock - [INTERN] OneNAND write out-of-band
+ * @param mtd           MTD device structure
+ * @param to            offset to write to
+ * @param len           number of bytes to write
+ * @param retlen        pointer to variable to store the number of written bytes
+ * @param buf           the data to write
+ * @param mode          operation mode
+ *
+ * OneNAND write out-of-band
+ */
+static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
+		struct mtd_oob_ops *ops)
+{
+	struct onenand_chip *this = mtd->priv;
+	int column, ret = 0, oobsize;
+	int written = 0, oobcmd;
+	u_char *oobbuf;
+	size_t len = ops->ooblen;
+	const u_char *buf = ops->oobbuf;
+	unsigned int mode = ops->mode;
+
+	to += ops->ooboffs;
+
+	pr_debug("onenand_write_oob_nolock: to = 0x%08x, len = %i\n",
+		 (unsigned int) to, (int) len);
+
+	/* Initialize retlen, in case of early exit */
+	ops->oobretlen = 0;
+
+	if (mode == MTD_OPS_AUTO_OOB)
+		oobsize = this->ecclayout->oobavail;
+	else
+		oobsize = mtd->oobsize;
+
+	column = to & (mtd->oobsize - 1);
+
+	if (unlikely(column >= oobsize)) {
+		printk(KERN_ERR "onenand_write_oob_nolock: Attempted to start write outside oob\n");
+		return -EINVAL;
+	}
+
+	/* For compatibility with NAND: Do not allow write past end of page */
+	if (unlikely(column + len > oobsize)) {
+		printk(KERN_ERR "onenand_write_oob_nolock: "
+				"Attempt to write past end of page\n");
+		return -EINVAL;
+	}
+
+	/* Do not allow reads past end of device */
+	if (unlikely(to >= mtd->size ||
+				column + len > ((mtd->size >> this->page_shift) -
+					(to >> this->page_shift)) * oobsize)) {
+		printk(KERN_ERR "onenand_write_oob_nolock: Attempted to write past end of device\n");
+		return -EINVAL;
+	}
+
+	oobbuf = this->oob_buf;
+
+	oobcmd = ONENAND_IS_4KB_PAGE(this) ?
+		ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
+
+	/* Loop until all data write */
+	while (written < len) {
+		int thislen = min_t(int, oobsize, len - written);
+
+		this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
+
+		/* We send data to spare ram with oobsize
+		 * to prevent byte access */
+		memset(oobbuf, 0xff, mtd->oobsize);
+		if (mode == MTD_OPS_AUTO_OOB)
+			onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
+		else
+			memcpy(oobbuf + column, buf, thislen);
+		this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+
+		if (ONENAND_IS_4KB_PAGE(this)) {
+			/* Set main area of DataRAM to 0xff*/
+			memset(this->page_buf, 0xff, mtd->writesize);
+			this->write_bufferram(mtd, 0, ONENAND_DATARAM,
+				this->page_buf,	0, mtd->writesize);
+		}
+
+		this->command(mtd, oobcmd, to, mtd->oobsize);
+
+		onenand_update_bufferram(mtd, to, 0);
+		if (ONENAND_IS_2PLANE(this)) {
+			ONENAND_SET_BUFFERRAM1(this);
+			onenand_update_bufferram(mtd, to + this->writesize, 0);
+		}
+
+		ret = this->wait(mtd, FL_WRITING);
+		if (ret) {
+			printk(KERN_ERR "onenand_write_oob_nolock: write failed %d\n", ret);
+			break;
+		}
+
+		ret = onenand_verify_oob(mtd, oobbuf, to);
+		if (ret) {
+			printk(KERN_ERR "onenand_write_oob_nolock: verify failed %d\n", ret);
+			break;
+		}
+
+		written += thislen;
+		if (written == len)
+			break;
+
+		to += mtd->writesize;
+		buf += thislen;
+		column = 0;
+	}
+
+	ops->oobretlen = written;
+
+	return ret;
+}
+
+/**
+ * onenand_write - [MTD Interface] compability function for onenand_write_ecc
+ * @param mtd		MTD device structure
+ * @param to		offset to write to
+ * @param len		number of bytes to write
+ * @param retlen	pointer to variable to store the number of written bytes
+ * @param buf		the data to write
+ *
+ * Write with ECC
+ */
+int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
+		  size_t * retlen, const u_char * buf)
+{
+	struct mtd_oob_ops ops = {
+		.len    = len,
+		.ooblen = 0,
+		.datbuf = (u_char *) buf,
+		.oobbuf = NULL,
+	};
+	int ret;
+
+	onenand_get_device(mtd, FL_WRITING);
+	ret = onenand_write_ops_nolock(mtd, to, &ops);
+	onenand_release_device(mtd);
+
+	*retlen = ops.retlen;
+	return ret;
+}
+
+/**
+ * onenand_write_oob - [MTD Interface] OneNAND write out-of-band
+ * @param mtd		MTD device structure
+ * @param to		offset to write to
+ * @param ops		oob operation description structure
+ *
+ * OneNAND write main and/or out-of-band
+ */
+int onenand_write_oob(struct mtd_info *mtd, loff_t to,
+			struct mtd_oob_ops *ops)
+{
+	int ret;
+
+	switch (ops->mode) {
+	case MTD_OPS_PLACE_OOB:
+	case MTD_OPS_AUTO_OOB:
+		break;
+	case MTD_OPS_RAW:
+		/* Not implemented yet */
+	default:
+		return -EINVAL;
+	}
+
+	onenand_get_device(mtd, FL_WRITING);
+	if (ops->datbuf)
+		ret = onenand_write_ops_nolock(mtd, to, ops);
+	else
+		ret = onenand_write_oob_nolock(mtd, to, ops);
+	onenand_release_device(mtd);
+
+	return ret;
+
+}
+
+/**
+ * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
+ * @param mtd		MTD device structure
+ * @param ofs		offset from device start
+ * @param allowbbt	1, if its allowed to access the bbt area
+ *
+ * Check, if the block is bad, Either by reading the bad block table or
+ * calling of the scan function.
+ */
+static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct bbm_info *bbm = this->bbm;
+
+	/* Return info from the table */
+	return bbm->isbad_bbt(mtd, ofs, allowbbt);
+}
+
+
+/**
+ * onenand_erase - [MTD Interface] erase block(s)
+ * @param mtd		MTD device structure
+ * @param instr		erase instruction
+ *
+ * Erase one ore more blocks
+ */
+int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int block_size;
+	loff_t addr = instr->addr;
+	unsigned int len = instr->len;
+	int ret = 0, i;
+	struct mtd_erase_region_info *region = NULL;
+	unsigned int region_end = 0;
+
+	pr_debug("onenand_erase: start = 0x%08x, len = %i\n",
+			(unsigned int) addr, len);
+
+	if (FLEXONENAND(this)) {
+		/* Find the eraseregion of this address */
+		i = flexonenand_region(mtd, addr);
+		region = &mtd->eraseregions[i];
+
+		block_size = region->erasesize;
+		region_end = region->offset
+			+ region->erasesize * region->numblocks;
+
+		/* Start address within region must align on block boundary.
+		 * Erase region's start offset is always block start address.
+		 */
+		if (unlikely((addr - region->offset) & (block_size - 1))) {
+			pr_debug("onenand_erase:" " Unaligned address\n");
+			return -EINVAL;
+		}
+	} else {
+		block_size = 1 << this->erase_shift;
+
+		/* Start address must align on block boundary */
+		if (unlikely(addr & (block_size - 1))) {
+			pr_debug("onenand_erase:" "Unaligned address\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Length must align on block boundary */
+	if (unlikely(len & (block_size - 1))) {
+		pr_debug("onenand_erase: Length not block aligned\n");
+		return -EINVAL;
+	}
+
+	/* Grab the lock and see if the device is available */
+	onenand_get_device(mtd, FL_ERASING);
+
+	/* Loop throught the pages */
+	instr->state = MTD_ERASING;
+
+	while (len) {
+
+		/* Check if we have a bad block, we do not erase bad blocks */
+		if (instr->priv == 0 && onenand_block_isbad_nolock(mtd, addr, 0)) {
+			printk(KERN_WARNING "onenand_erase: attempt to erase"
+				" a bad block at addr 0x%08x\n",
+				(unsigned int) addr);
+			instr->state = MTD_ERASE_FAILED;
+			goto erase_exit;
+		}
+
+		this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
+
+		onenand_invalidate_bufferram(mtd, addr, block_size);
+
+		ret = this->wait(mtd, FL_ERASING);
+		/* Check, if it is write protected */
+		if (ret) {
+			if (ret == -EPERM)
+				pr_debug("onenand_erase: "
+					 "Device is write protected!!!\n");
+			else
+				pr_debug("onenand_erase: "
+					 "Failed erase, block %d\n",
+					 onenand_block(this, addr));
+			instr->state = MTD_ERASE_FAILED;
+			instr->fail_addr = addr;
+
+			goto erase_exit;
+		}
+
+		len -= block_size;
+		addr += block_size;
+
+		if (addr == region_end) {
+			if (!len)
+				break;
+			region++;
+
+			block_size = region->erasesize;
+			region_end = region->offset
+				+ region->erasesize * region->numblocks;
+
+			if (len & (block_size - 1)) {
+				/* This has been checked at MTD
+				 * partitioning level. */
+				printk("onenand_erase: Unaligned address\n");
+				goto erase_exit;
+			}
+		}
+	}
+
+	instr->state = MTD_ERASE_DONE;
+
+erase_exit:
+
+	ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
+	/* Do call back function */
+	if (!ret)
+		mtd_erase_callback(instr);
+
+	/* Deselect and wake up anyone waiting on the device */
+	onenand_release_device(mtd);
+
+	return ret;
+}
+
+/**
+ * onenand_sync - [MTD Interface] sync
+ * @param mtd		MTD device structure
+ *
+ * Sync is actually a wait for chip ready function
+ */
+void onenand_sync(struct mtd_info *mtd)
+{
+	pr_debug("onenand_sync: called\n");
+
+	/* Grab the lock and see if the device is available */
+	onenand_get_device(mtd, FL_SYNCING);
+
+	/* Release it and go back */
+	onenand_release_device(mtd);
+}
+
+/**
+ * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
+ * @param mtd		MTD device structure
+ * @param ofs		offset relative to mtd start
+ *
+ * Check whether the block is bad
+ */
+int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+	int ret;
+
+	/* Check for invalid offset */
+	if (ofs > mtd->size)
+		return -EINVAL;
+
+	onenand_get_device(mtd, FL_READING);
+	ret = onenand_block_isbad_nolock(mtd,ofs, 0);
+	onenand_release_device(mtd);
+	return ret;
+}
+
+/**
+ * onenand_default_block_markbad - [DEFAULT] mark a block bad
+ * @param mtd           MTD device structure
+ * @param ofs           offset from device start
+ *
+ * This is the default implementation, which can be overridden by
+ * a hardware specific driver.
+ */
+static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct bbm_info *bbm = this->bbm;
+	u_char buf[2] = {0, 0};
+	struct mtd_oob_ops ops = {
+		.mode = MTD_OPS_PLACE_OOB,
+		.ooblen = 2,
+		.oobbuf = buf,
+		.ooboffs = 0,
+	};
+	int block;
+
+	/* Get block number */
+	block = onenand_block(this, ofs);
+	if (bbm->bbt)
+		bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
+
+	/* We write two bytes, so we dont have to mess with 16 bit access */
+	ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
+	return onenand_write_oob_nolock(mtd, ofs, &ops);
+}
+
+/**
+ * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
+ * @param mtd		MTD device structure
+ * @param ofs		offset relative to mtd start
+ *
+ * Mark the block as bad
+ */
+int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+	struct onenand_chip *this = mtd->priv;
+	int ret;
+
+	ret = onenand_block_isbad(mtd, ofs);
+	if (ret) {
+		/* If it was bad already, return success and do nothing */
+		if (ret > 0)
+			return 0;
+		return ret;
+	}
+
+	onenand_get_device(mtd, FL_WRITING);
+	ret = this->block_markbad(mtd, ofs);
+	onenand_release_device(mtd);
+
+	return ret;
+}
+
+/**
+ * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
+ * @param mtd           MTD device structure
+ * @param ofs           offset relative to mtd start
+ * @param len           number of bytes to lock or unlock
+ * @param cmd           lock or unlock command
+ *
+ * Lock or unlock one or more blocks
+ */
+static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int start, end, block, value, status;
+
+	start = onenand_block(this, ofs);
+	end = onenand_block(this, ofs + len);
+
+	/* Continuous lock scheme */
+	if (this->options & ONENAND_HAS_CONT_LOCK) {
+		/* Set start block address */
+		this->write_word(start,
+				 this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+		/* Set end block address */
+		this->write_word(end - 1,
+				 this->base + ONENAND_REG_END_BLOCK_ADDRESS);
+		/* Write unlock command */
+		this->command(mtd, cmd, 0, 0);
+
+		/* There's no return value */
+		this->wait(mtd, FL_UNLOCKING);
+
+		/* Sanity check */
+		while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+		       & ONENAND_CTRL_ONGO)
+			continue;
+
+		/* Check lock status */
+		status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+		if (!(status & ONENAND_WP_US))
+			printk(KERN_ERR "wp status = 0x%x\n", status);
+
+		return 0;
+	}
+
+	/* Block lock scheme */
+	for (block = start; block < end; block++) {
+		/* Set block address */
+		value = onenand_block_address(this, block);
+		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
+		/* Select DataRAM for DDP */
+		value = onenand_bufferram_address(this, block);
+		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+
+		/* Set start block address */
+		this->write_word(block,
+				 this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+		/* Write unlock command */
+		this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0);
+
+		/* There's no return value */
+		this->wait(mtd, FL_UNLOCKING);
+
+		/* Sanity check */
+		while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+		       & ONENAND_CTRL_ONGO)
+			continue;
+
+		/* Check lock status */
+		status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+		if (!(status & ONENAND_WP_US))
+			printk(KERN_ERR "block = %d, wp status = 0x%x\n",
+			       block, status);
+	}
+
+	return 0;
+}
+
+#ifdef ONENAND_LINUX
+/**
+ * onenand_lock - [MTD Interface] Lock block(s)
+ * @param mtd           MTD device structure
+ * @param ofs           offset relative to mtd start
+ * @param len           number of bytes to unlock
+ *
+ * Lock one or more blocks
+ */
+static int onenand_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	int ret;
+
+	onenand_get_device(mtd, FL_LOCKING);
+	ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK);
+	onenand_release_device(mtd);
+	return ret;
+}
+
+/**
+ * onenand_unlock - [MTD Interface] Unlock block(s)
+ * @param mtd           MTD device structure
+ * @param ofs           offset relative to mtd start
+ * @param len           number of bytes to unlock
+ *
+ * Unlock one or more blocks
+ */
+static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
+{
+	int ret;
+
+	onenand_get_device(mtd, FL_LOCKING);
+	ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+	onenand_release_device(mtd);
+	return ret;
+}
+#endif
+
+/**
+ * onenand_check_lock_status - [OneNAND Interface] Check lock status
+ * @param this          onenand chip data structure
+ *
+ * Check lock status
+ */
+static int onenand_check_lock_status(struct onenand_chip *this)
+{
+	unsigned int value, block, status;
+	unsigned int end;
+
+	end = this->chipsize >> this->erase_shift;
+	for (block = 0; block < end; block++) {
+		/* Set block address */
+		value = onenand_block_address(this, block);
+		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
+		/* Select DataRAM for DDP */
+		value = onenand_bufferram_address(this, block);
+		this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
+		/* Set start block address */
+		this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+
+		/* Check lock status */
+		status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
+		if (!(status & ONENAND_WP_US)) {
+			printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
+/**
+ * onenand_unlock_all - [OneNAND Interface] unlock all blocks
+ * @param mtd           MTD device structure
+ *
+ * Unlock all blocks
+ */
+static void onenand_unlock_all(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	loff_t ofs = 0;
+	size_t len = mtd->size;
+
+	if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+		/* Set start block address */
+		this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
+		/* Write unlock command */
+		this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
+
+		/* There's no return value */
+		this->wait(mtd, FL_LOCKING);
+
+		/* Sanity check */
+		while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
+				& ONENAND_CTRL_ONGO)
+			continue;
+
+		/* Check lock status */
+		if (onenand_check_lock_status(this))
+			return;
+
+		/* Workaround for all block unlock in DDP */
+		if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
+			/* All blocks on another chip */
+			ofs = this->chipsize >> 1;
+			len = this->chipsize >> 1;
+		}
+	}
+
+	onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+}
+
+
+/**
+ * onenand_check_features - Check and set OneNAND features
+ * @param mtd           MTD data structure
+ *
+ * Check and set OneNAND features
+ * - lock scheme
+ * - two plane
+ */
+static void onenand_check_features(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int density, process;
+
+	/* Lock scheme depends on density and process */
+	density = onenand_get_density(this->device_id);
+	process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
+
+	/* Lock scheme */
+	switch (density) {
+	case ONENAND_DEVICE_DENSITY_4Gb:
+		if (ONENAND_IS_DDP(this))
+			this->options |= ONENAND_HAS_2PLANE;
+		else
+			this->options |= ONENAND_HAS_4KB_PAGE;
+
+	case ONENAND_DEVICE_DENSITY_2Gb:
+		/* 2Gb DDP don't have 2 plane */
+		if (!ONENAND_IS_DDP(this))
+			this->options |= ONENAND_HAS_2PLANE;
+		this->options |= ONENAND_HAS_UNLOCK_ALL;
+
+	case ONENAND_DEVICE_DENSITY_1Gb:
+		/* A-Die has all block unlock */
+		if (process)
+			this->options |= ONENAND_HAS_UNLOCK_ALL;
+		break;
+
+	default:
+		/* Some OneNAND has continuous lock scheme */
+		if (!process)
+			this->options |= ONENAND_HAS_CONT_LOCK;
+		break;
+	}
+
+	if (ONENAND_IS_MLC(this))
+		this->options |= ONENAND_HAS_4KB_PAGE;
+
+	if (ONENAND_IS_4KB_PAGE(this))
+		this->options &= ~ONENAND_HAS_2PLANE;
+
+	if (FLEXONENAND(this)) {
+		this->options &= ~ONENAND_HAS_CONT_LOCK;
+		this->options |= ONENAND_HAS_UNLOCK_ALL;
+	}
+
+	if (this->options & ONENAND_HAS_CONT_LOCK)
+		printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
+	if (this->options & ONENAND_HAS_UNLOCK_ALL)
+		printk(KERN_DEBUG "Chip support all block unlock\n");
+	if (this->options & ONENAND_HAS_2PLANE)
+		printk(KERN_DEBUG "Chip has 2 plane\n");
+	if (this->options & ONENAND_HAS_4KB_PAGE)
+		printk(KERN_DEBUG "Chip has 4KiB pagesize\n");
+
+}
+
+/**
+ * onenand_print_device_info - Print device ID
+ * @param device        device ID
+ *
+ * Print device ID
+ */
+char *onenand_print_device_info(int device, int version)
+{
+	int vcc, demuxed, ddp, density, flexonenand;
+	char *dev_info = malloc(80);
+	char *p = dev_info;
+
+	vcc = device & ONENAND_DEVICE_VCC_MASK;
+	demuxed = device & ONENAND_DEVICE_IS_DEMUX;
+	ddp = device & ONENAND_DEVICE_IS_DDP;
+	density = onenand_get_density(device);
+	flexonenand = device & DEVICE_IS_FLEXONENAND;
+	p += sprintf(dev_info, "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)",
+	       demuxed ? "" : "Muxed ",
+	       flexonenand ? "Flex-" : "",
+	       ddp ? "(DDP)" : "",
+	       (16 << density), vcc ? "2.65/3.3" : "1.8", device);
+
+	sprintf(p, "\nOneNAND version = 0x%04x", version);
+	printk("%s\n", dev_info);
+
+	return dev_info;
+}
+
+static const struct onenand_manufacturers onenand_manuf_ids[] = {
+	{ONENAND_MFR_NUMONYX, "Numonyx"},
+	{ONENAND_MFR_SAMSUNG, "Samsung"},
+};
+
+/**
+ * onenand_check_maf - Check manufacturer ID
+ * @param manuf         manufacturer ID
+ *
+ * Check manufacturer ID
+ */
+static int onenand_check_maf(int manuf)
+{
+	int size = ARRAY_SIZE(onenand_manuf_ids);
+	int i;
+#ifdef ONENAND_DEBUG
+	char *name;
+#endif
+
+	for (i = 0; i < size; i++)
+		if (manuf == onenand_manuf_ids[i].id)
+			break;
+
+#ifdef ONENAND_DEBUG
+	if (i < size)
+		name = onenand_manuf_ids[i].name;
+	else
+		name = "Unknown";
+
+	printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf);
+#endif
+
+	return i == size;
+}
+
+/**
+* flexonenand_get_boundary	- Reads the SLC boundary
+* @param onenand_info		- onenand info structure
+*
+* Fill up boundary[] field in onenand_chip
+**/
+static int flexonenand_get_boundary(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int die, bdry;
+	int syscfg, locked;
+
+	/* Disable ECC */
+	syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+	this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
+
+	for (die = 0; die < this->dies; die++) {
+		this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+		this->wait(mtd, FL_SYNCING);
+
+		this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
+		this->wait(mtd, FL_READING);
+
+		bdry = this->read_word(this->base + ONENAND_DATARAM);
+		if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
+			locked = 0;
+		else
+			locked = 1;
+		this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
+
+		this->command(mtd, ONENAND_CMD_RESET, 0, 0);
+		this->wait(mtd, FL_RESETING);
+
+		printk(KERN_INFO "Die %d boundary: %d%s\n", die,
+		       this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
+	}
+
+	/* Enable ECC */
+	this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+	return 0;
+}
+
+/**
+ * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
+ * 			  boundary[], diesize[], mtd->size, mtd->erasesize,
+ * 			  mtd->eraseregions
+ * @param mtd		- MTD device structure
+ */
+static void flexonenand_get_size(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int die, i, eraseshift, density;
+	int blksperdie, maxbdry;
+	loff_t ofs;
+
+	density = onenand_get_density(this->device_id);
+	blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift);
+	blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+	maxbdry = blksperdie - 1;
+	eraseshift = this->erase_shift - 1;
+
+	mtd->numeraseregions = this->dies << 1;
+
+	/* This fills up the device boundary */
+	flexonenand_get_boundary(mtd);
+	die = 0;
+	ofs = 0;
+	i = -1;
+	for (; die < this->dies; die++) {
+		if (!die || this->boundary[die-1] != maxbdry) {
+			i++;
+			mtd->eraseregions[i].offset = ofs;
+			mtd->eraseregions[i].erasesize = 1 << eraseshift;
+			mtd->eraseregions[i].numblocks =
+							this->boundary[die] + 1;
+			ofs += mtd->eraseregions[i].numblocks << eraseshift;
+			eraseshift++;
+		} else {
+			mtd->numeraseregions -= 1;
+			mtd->eraseregions[i].numblocks +=
+							this->boundary[die] + 1;
+			ofs += (this->boundary[die] + 1) << (eraseshift - 1);
+		}
+		if (this->boundary[die] != maxbdry) {
+			i++;
+			mtd->eraseregions[i].offset = ofs;
+			mtd->eraseregions[i].erasesize = 1 << eraseshift;
+			mtd->eraseregions[i].numblocks = maxbdry ^
+							 this->boundary[die];
+			ofs += mtd->eraseregions[i].numblocks << eraseshift;
+			eraseshift--;
+		} else
+			mtd->numeraseregions -= 1;
+	}
+
+	/* Expose MLC erase size except when all blocks are SLC */
+	mtd->erasesize = 1 << this->erase_shift;
+	if (mtd->numeraseregions == 1)
+		mtd->erasesize >>= 1;
+
+	printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
+	for (i = 0; i < mtd->numeraseregions; i++)
+		printk(KERN_INFO "[offset: 0x%08llx, erasesize: 0x%05x,"
+			" numblocks: %04u]\n", mtd->eraseregions[i].offset,
+			mtd->eraseregions[i].erasesize,
+			mtd->eraseregions[i].numblocks);
+
+	for (die = 0, mtd->size = 0; die < this->dies; die++) {
+		this->diesize[die] = (loff_t) (blksperdie << this->erase_shift);
+		this->diesize[die] -= (loff_t) (this->boundary[die] + 1)
+						 << (this->erase_shift - 1);
+		mtd->size += this->diesize[die];
+	}
+}
+
+/**
+ * flexonenand_check_blocks_erased - Check if blocks are erased
+ * @param mtd_info	- mtd info structure
+ * @param start		- first erase block to check
+ * @param end		- last erase block to check
+ *
+ * Converting an unerased block from MLC to SLC
+ * causes byte values to change. Since both data and its ECC
+ * have changed, reads on the block give uncorrectable error.
+ * This might lead to the block being detected as bad.
+ *
+ * Avoid this by ensuring that the block to be converted is
+ * erased.
+ */
+static int flexonenand_check_blocks_erased(struct mtd_info *mtd,
+					int start, int end)
+{
+	struct onenand_chip *this = mtd->priv;
+	int i, ret;
+	int block;
+	struct mtd_oob_ops ops = {
+		.mode = MTD_OPS_PLACE_OOB,
+		.ooboffs = 0,
+		.ooblen	= mtd->oobsize,
+		.datbuf	= NULL,
+		.oobbuf	= this->oob_buf,
+	};
+	loff_t addr;
+
+	printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
+
+	for (block = start; block <= end; block++) {
+		addr = flexonenand_addr(this, block);
+		if (onenand_block_isbad_nolock(mtd, addr, 0))
+			continue;
+
+		/*
+		 * Since main area write results in ECC write to spare,
+		 * it is sufficient to check only ECC bytes for change.
+		 */
+		ret = onenand_read_oob_nolock(mtd, addr, &ops);
+		if (ret)
+			return ret;
+
+		for (i = 0; i < mtd->oobsize; i++)
+			if (this->oob_buf[i] != 0xff)
+				break;
+
+		if (i != mtd->oobsize) {
+			printk(KERN_WARNING "Block %d not erased.\n", block);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * flexonenand_set_boundary	- Writes the SLC boundary
+ * @param mtd			- mtd info structure
+ */
+int flexonenand_set_boundary(struct mtd_info *mtd, int die,
+				    int boundary, int lock)
+{
+	struct onenand_chip *this = mtd->priv;
+	int ret, density, blksperdie, old, new, thisboundary;
+	loff_t addr;
+
+	if (die >= this->dies)
+		return -EINVAL;
+
+	if (boundary == this->boundary[die])
+		return 0;
+
+	density = onenand_get_density(this->device_id);
+	blksperdie = ((16 << density) << 20) >> this->erase_shift;
+	blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
+
+	if (boundary >= blksperdie) {
+		printk("flexonenand_set_boundary:"
+			"Invalid boundary value. "
+			"Boundary not changed.\n");
+		return -EINVAL;
+	}
+
+	/* Check if converting blocks are erased */
+	old = this->boundary[die] + (die * this->density_mask);
+	new = boundary + (die * this->density_mask);
+	ret = flexonenand_check_blocks_erased(mtd, min(old, new)
+						+ 1, max(old, new));
+	if (ret) {
+		printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n");
+		return ret;
+	}
+
+	this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
+	this->wait(mtd, FL_SYNCING);
+
+	/* Check is boundary is locked */
+	this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
+	ret = this->wait(mtd, FL_READING);
+
+	thisboundary = this->read_word(this->base + ONENAND_DATARAM);
+	if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
+		printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n");
+		goto out;
+	}
+
+	printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n",
+			die, boundary, lock ? "(Locked)" : "(Unlocked)");
+
+	boundary &= FLEXONENAND_PI_MASK;
+	boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
+
+	addr = die ? this->diesize[0] : 0;
+	this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
+	ret = this->wait(mtd, FL_ERASING);
+	if (ret) {
+		printk("flexonenand_set_boundary:"
+			"Failed PI erase for Die %d\n", die);
+		goto out;
+	}
+
+	this->write_word(boundary, this->base + ONENAND_DATARAM);
+	this->command(mtd, ONENAND_CMD_PROG, addr, 0);
+	ret = this->wait(mtd, FL_WRITING);
+	if (ret) {
+		printk("flexonenand_set_boundary:"
+			"Failed PI write for Die %d\n", die);
+		goto out;
+	}
+
+	this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
+	ret = this->wait(mtd, FL_WRITING);
+out:
+	this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
+	this->wait(mtd, FL_RESETING);
+	if (!ret)
+		/* Recalculate device size on boundary change*/
+		flexonenand_get_size(mtd);
+
+	return ret;
+}
+
+/**
+ * onenand_chip_probe - [OneNAND Interface] Probe the OneNAND chip
+ * @param mtd		MTD device structure
+ *
+ * OneNAND detection method:
+ *   Compare the the values from command with ones from register
+ */
+static int onenand_chip_probe(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int bram_maf_id, bram_dev_id, maf_id, dev_id;
+	int syscfg;
+
+	/* Save system configuration 1 */
+	syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
+
+	/* Clear Sync. Burst Read mode to read BootRAM */
+	this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ),
+			 this->base + ONENAND_REG_SYS_CFG1);
+
+	/* Send the command for reading device ID from BootRAM */
+	this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
+
+	/* Read manufacturer and device IDs from BootRAM */
+	bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
+	bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
+
+	/* Reset OneNAND to read default register values */
+	this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
+
+	/* Wait reset */
+	if (this->wait(mtd, FL_RESETING))
+		return -ENXIO;
+
+	/* Restore system configuration 1 */
+	this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
+
+	/* Check manufacturer ID */
+	if (onenand_check_maf(bram_maf_id))
+		return -ENXIO;
+
+	/* Read manufacturer and device IDs from Register */
+	maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
+	dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+
+	/* Check OneNAND device */
+	if (maf_id != bram_maf_id || dev_id != bram_dev_id)
+		return -ENXIO;
+
+	return 0;
+}
+
+/**
+ * onenand_probe - [OneNAND Interface] Probe the OneNAND device
+ * @param mtd		MTD device structure
+ *
+ * OneNAND detection method:
+ *   Compare the the values from command with ones from register
+ */
+int onenand_probe(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int dev_id, ver_id;
+	int density;
+	int ret;
+
+	ret = this->chip_probe(mtd);
+	if (ret)
+		return ret;
+
+	/* Read device IDs from Register */
+	dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
+	ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
+	this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
+
+	/* Flash device information */
+	mtd->name = onenand_print_device_info(dev_id, ver_id);
+	this->device_id = dev_id;
+	this->version_id = ver_id;
+
+	/* Check OneNAND features */
+	onenand_check_features(mtd);
+
+	density = onenand_get_density(dev_id);
+	if (FLEXONENAND(this)) {
+		this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
+		/* Maximum possible erase regions */
+		mtd->numeraseregions = this->dies << 1;
+		mtd->eraseregions = malloc(sizeof(struct mtd_erase_region_info)
+					* (this->dies << 1));
+		if (!mtd->eraseregions)
+			return -ENOMEM;
+	}
+
+	/*
+	 * For Flex-OneNAND, chipsize represents maximum possible device size.
+	 * mtd->size represents the actual device size.
+	 */
+	this->chipsize = (16 << density) << 20;
+
+	/* OneNAND page size & block size */
+	/* The data buffer size is equal to page size */
+	mtd->writesize =
+	    this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
+	/* We use the full BufferRAM */
+	if (ONENAND_IS_4KB_PAGE(this))
+		mtd->writesize <<= 1;
+
+	mtd->oobsize = mtd->writesize >> 5;
+	/* Pagers per block is always 64 in OneNAND */
+	mtd->erasesize = mtd->writesize << 6;
+	/*
+	 * Flex-OneNAND SLC area has 64 pages per block.
+	 * Flex-OneNAND MLC area has 128 pages per block.
+	 * Expose MLC erase size to find erase_shift and page_mask.
+	 */
+	if (FLEXONENAND(this))
+		mtd->erasesize <<= 1;
+
+	this->erase_shift = ffs(mtd->erasesize) - 1;
+	this->page_shift = ffs(mtd->writesize) - 1;
+	this->ppb_shift = (this->erase_shift - this->page_shift);
+	this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
+	/* Set density mask. it is used for DDP */
+	if (ONENAND_IS_DDP(this))
+		this->density_mask = this->chipsize >> (this->erase_shift + 1);
+	/* It's real page size */
+	this->writesize = mtd->writesize;
+
+	/* REVIST: Multichip handling */
+
+	if (FLEXONENAND(this))
+		flexonenand_get_size(mtd);
+	else
+		mtd->size = this->chipsize;
+
+	mtd->type = ONENAND_IS_MLC(this) ? MTD_MLCNANDFLASH : MTD_NANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->_erase = onenand_erase;
+	mtd->_read_oob = onenand_read_oob;
+	mtd->_write_oob = onenand_write_oob;
+	mtd->_sync = onenand_sync;
+	mtd->_block_isbad = onenand_block_isbad;
+	mtd->_block_markbad = onenand_block_markbad;
+	mtd->writebufsize = mtd->writesize;
+
+	return 0;
+}
+
+/**
+ * onenand_scan - [OneNAND Interface] Scan for the OneNAND device
+ * @param mtd		MTD device structure
+ * @param maxchips	Number of chips to scan for
+ *
+ * This fills out all the not initialized function pointers
+ * with the defaults.
+ * The flash ID is read and the mtd/chip structures are
+ * filled with the appropriate values.
+ */
+int onenand_scan(struct mtd_info *mtd, int maxchips)
+{
+	int i;
+	struct onenand_chip *this = mtd->priv;
+
+	if (!this->read_word)
+		this->read_word = onenand_readw;
+	if (!this->write_word)
+		this->write_word = onenand_writew;
+
+	if (!this->command)
+		this->command = onenand_command;
+	if (!this->wait)
+		this->wait = onenand_wait;
+	if (!this->bbt_wait)
+		this->bbt_wait = onenand_bbt_wait;
+
+	if (!this->read_bufferram)
+		this->read_bufferram = onenand_read_bufferram;
+	if (!this->write_bufferram)
+		this->write_bufferram = onenand_write_bufferram;
+
+	if (!this->chip_probe)
+		this->chip_probe = onenand_chip_probe;
+
+	if (!this->block_markbad)
+		this->block_markbad = onenand_default_block_markbad;
+	if (!this->scan_bbt)
+		this->scan_bbt = onenand_default_bbt;
+
+	if (onenand_probe(mtd))
+		return -ENXIO;
+
+	/* Set Sync. Burst Read after probing */
+	if (this->mmcontrol) {
+		printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
+		this->read_bufferram = onenand_sync_read_bufferram;
+	}
+
+	/* Allocate buffers, if necessary */
+	if (!this->page_buf) {
+		this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
+		if (!this->page_buf) {
+			printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n");
+			return -ENOMEM;
+		}
+		this->options |= ONENAND_PAGEBUF_ALLOC;
+	}
+	if (!this->oob_buf) {
+		this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
+		if (!this->oob_buf) {
+			printk(KERN_ERR "onenand_scan: Can't allocate oob_buf\n");
+			if (this->options & ONENAND_PAGEBUF_ALLOC) {
+				this->options &= ~ONENAND_PAGEBUF_ALLOC;
+				kfree(this->page_buf);
+			}
+			return -ENOMEM;
+		}
+		this->options |= ONENAND_OOBBUF_ALLOC;
+	}
+
+	this->state = FL_READY;
+
+	/*
+	 * Allow subpage writes up to oobsize.
+	 */
+	switch (mtd->oobsize) {
+	case 128:
+		this->ecclayout = &onenand_oob_128;
+		mtd->subpage_sft = 0;
+		break;
+
+	case 64:
+		this->ecclayout = &onenand_oob_64;
+		mtd->subpage_sft = 2;
+		break;
+
+	case 32:
+		this->ecclayout = &onenand_oob_32;
+		mtd->subpage_sft = 1;
+		break;
+
+	default:
+		printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n",
+			mtd->oobsize);
+		mtd->subpage_sft = 0;
+		/* To prevent kernel oops */
+		this->ecclayout = &onenand_oob_32;
+		break;
+	}
+
+	this->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+	/*
+	 * The number of bytes available for a client to place data into
+	 * the out of band area
+	 */
+	this->ecclayout->oobavail = 0;
+
+	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE &&
+	    this->ecclayout->oobfree[i].length; i++)
+		this->ecclayout->oobavail +=
+			this->ecclayout->oobfree[i].length;
+	mtd->oobavail = this->ecclayout->oobavail;
+
+	mtd->ecclayout = this->ecclayout;
+
+	/* Unlock whole block */
+	onenand_unlock_all(mtd);
+
+	return this->scan_bbt(mtd);
+}
+
+/**
+ * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
+ * @param mtd		MTD device structure
+ */
+void onenand_release(struct mtd_info *mtd)
+{
+}
diff --git a/roms/u-boot/drivers/mtd/onenand/onenand_bbt.c b/roms/u-boot/drivers/mtd/onenand/onenand_bbt.c
new file mode 100644
index 000000000..eca9edff6
--- /dev/null
+++ b/roms/u-boot/drivers/mtd/onenand/onenand_bbt.c
@@ -0,0 +1,265 @@
+/*
+ *  linux/drivers/mtd/onenand/onenand_bbt.c
+ *
+ *  Bad Block Table support for the OneNAND driver
+ *
+ *  Copyright(c) 2005-2008 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ *  TODO:
+ *    Split BBT core and chip specific BBT.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <log.h>
+#include <linux/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <malloc.h>
+
+#include <linux/errno.h>
+
+/**
+ * check_short_pattern - [GENERIC] check if a pattern is in the buffer
+ * @param buf		the buffer to search
+ * @param len		the length of buffer to search
+ * @param paglen	the pagelength
+ * @param td		search pattern descriptor
+ *
+ * Check for a pattern at the given place. Used to search bad block
+ * tables and good / bad block identifiers. Same as check_pattern, but
+ * no optional empty check and the pattern is expected to start
+ * at offset 0.
+ */
+static int check_short_pattern(uint8_t * buf, int len, int paglen,
+			       struct nand_bbt_descr *td)
+{
+	int i;
+	uint8_t *p = buf;
+
+	/* Compare the pattern */
+	for (i = 0; i < td->len; i++) {
+		if (p[i] != td->pattern[i])
+			return -1;
+	}
+	return 0;
+}
+
+/**
+ * create_bbt - [GENERIC] Create a bad block table by scanning the device
+ * @param mtd		MTD device structure
+ * @param buf		temporary buffer
+ * @param bd		descriptor for the good/bad block search pattern
+ * @param chip		create the table for a specific chip, -1 read all chips.
+ *              Applies only if NAND_BBT_PERCHIP option is set
+ *
+ * Create a bad block table by scanning the device
+ * for the given good/bad block identify pattern
+ */
+static int create_bbt(struct mtd_info *mtd, uint8_t * buf,
+		      struct nand_bbt_descr *bd, int chip)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct bbm_info *bbm = this->bbm;
+	int i, j, numblocks, len, scanlen;
+	int startblock;
+	loff_t from;
+	size_t readlen, ooblen;
+	struct mtd_oob_ops ops;
+	int rgn;
+
+	printk(KERN_INFO "Scanning device for bad blocks\n");
+
+	len = 1;
+
+	/* We need only read few bytes from the OOB area */
+	scanlen = ooblen = 0;
+	readlen = bd->len;
+
+	/* chip == -1 case only */
+	/* Note that numblocks is 2 * (real numblocks) here;
+	 * see i += 2 below as it makses shifting and masking less painful
+	 */
+	numblocks = this->chipsize >> (bbm->bbt_erase_shift - 1);
+	startblock = 0;
+	from = 0;
+
+	ops.mode = MTD_OPS_PLACE_OOB;
+	ops.ooblen = readlen;
+	ops.oobbuf = buf;
+	ops.len = ops.ooboffs = ops.retlen = ops.oobretlen = 0;
+
+	for (i = startblock; i < numblocks;) {
+		int ret;
+
+		for (j = 0; j < len; j++) {
+			/* No need to read pages fully,
+			 * just read required OOB bytes */
+			ret = onenand_bbt_read_oob(mtd,
+					     from + j * mtd->writesize +
+					     bd->offs, &ops);
+
+			/* If it is a initial bad block, just ignore it */
+			if (ret == ONENAND_BBT_READ_FATAL_ERROR)
+				return -EIO;
+
+			if (ret || check_short_pattern
+			    (&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
+				bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
+				printk(KERN_WARNING
+				       "Bad eraseblock %d at 0x%08x\n", i >> 1,
+				       (unsigned int)from);
+				break;
+			}
+		}
+		i += 2;
+
+		if (FLEXONENAND(this)) {
+			rgn = flexonenand_region(mtd, from);
+			from += mtd->eraseregions[rgn].erasesize;
+		} else
+			from += (1 << bbm->bbt_erase_shift);
+	}
+
+	return 0;
+}
+
+/**
+ * onenand_memory_bbt - [GENERIC] create a memory based bad block table
+ * @param mtd		MTD device structure
+ * @param bd		descriptor for the good/bad block search pattern
+ *
+ * The function creates a memory based bbt by scanning the device
+ * for manufacturer / software marked good / bad blocks
+ */
+static inline int onenand_memory_bbt(struct mtd_info *mtd,
+				     struct nand_bbt_descr *bd)
+{
+	unsigned char data_buf[MAX_ONENAND_PAGESIZE];
+
+	return create_bbt(mtd, data_buf, bd, -1);
+}
+
+/**
+ * onenand_isbad_bbt - [OneNAND Interface] Check if a block is bad
+ * @param mtd		MTD device structure
+ * @param offs		offset in the device
+ * @param allowbbt	allow access to bad block table region
+ */
+static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct bbm_info *bbm = this->bbm;
+	int block;
+	uint8_t res;
+
+	/* Get block number * 2 */
+	block = (int) (onenand_block(this, offs) << 1);
+	res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03;
+
+	pr_debug("onenand_isbad_bbt: bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+		 (unsigned int)offs, block >> 1, res);
+
+	switch ((int)res) {
+	case 0x00:
+		return 0;
+	case 0x01:
+		return 1;
+	case 0x02:
+		return allowbbt ? 0 : 1;
+	}
+
+	return 1;
+}
+
+/**
+ * onenand_scan_bbt - [OneNAND Interface] scan, find, read and maybe create bad block table(s)
+ * @param mtd		MTD device structure
+ * @param bd		descriptor for the good/bad block search pattern
+ *
+ * The function checks, if a bad block table(s) is/are already
+ * available. If not it scans the device for manufacturer
+ * marked good / bad blocks and writes the bad block table(s) to
+ * the selected place.
+ *
+ * The bad block table memory is allocated here. It must be freed
+ * by calling the onenand_free_bbt function.
+ *
+ */
+int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct bbm_info *bbm = this->bbm;
+	int len, ret = 0;
+
+	len = this->chipsize >> (this->erase_shift + 2);
+	/* Allocate memory (2bit per block) */
+	bbm->bbt = malloc(len);
+	if (!bbm->bbt)
+		return -ENOMEM;
+	/* Clear the memory bad block table */
+	memset(bbm->bbt, 0x00, len);
+
+	/* Set the bad block position */
+	bbm->badblockpos = ONENAND_BADBLOCK_POS;
+
+	/* Set erase shift */
+	bbm->bbt_erase_shift = this->erase_shift;
+
+	if (!bbm->isbad_bbt)
+		bbm->isbad_bbt = onenand_isbad_bbt;
+
+	/* Scan the device to build a memory based bad block table */
+	if ((ret = onenand_memory_bbt(mtd, bd))) {
+		printk(KERN_ERR
+		       "onenand_scan_bbt: Can't scan flash and build the RAM-based BBT\n");
+		free(bbm->bbt);
+		bbm->bbt = NULL;
+	}
+
+	return ret;
+}
+
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr largepage_memorybased = {
+	.options = 0,
+	.offs = 0,
+	.len = 2,
+	.pattern = scan_ff_pattern,
+};
+
+/**
+ * onenand_default_bbt - [OneNAND Interface] Select a default bad block table for the device
+ * @param mtd		MTD device structure
+ *
+ * This function selects the default bad block table
+ * support for the device and calls the onenand_scan_bbt function
+ */
+int onenand_default_bbt(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct bbm_info *bbm;
+
+	this->bbm = malloc(sizeof(struct bbm_info));
+	if (!this->bbm)
+		return -ENOMEM;
+
+	bbm = this->bbm;
+
+	memset(bbm, 0, sizeof(struct bbm_info));
+
+	/* 1KB page has same configuration as 2KB page */
+	if (!bbm->badblock_pattern)
+		bbm->badblock_pattern = &largepage_memorybased;
+
+	return onenand_scan_bbt(mtd, bbm->badblock_pattern);
+}
diff --git a/roms/u-boot/drivers/mtd/onenand/onenand_spl.c b/roms/u-boot/drivers/mtd/onenand/onenand_spl.c
new file mode 100644
index 000000000..ab6f1a8be
--- /dev/null
+++ b/roms/u-boot/drivers/mtd/onenand/onenand_spl.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code:
+ *	Copyright (C) 2005-2009 Samsung Electronics
+ *	Kyungmin Park <kyungmin.park@samsung.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/mtd/onenand_regs.h>
+#include <onenand_uboot.h>
+
+/*
+ * Device geometry:
+ * - 2048b page, 128k erase block.
+ * - 4096b page, 256k erase block.
+ */
+enum onenand_spl_pagesize {
+	PAGE_2K = 2048,
+	PAGE_4K = 4096,
+};
+
+static unsigned int density_mask;
+
+#define ONENAND_PAGES_PER_BLOCK			64
+#define onenand_sector_address(page)		(page << 2)
+#define onenand_buffer_address()		((1 << 3) << 8)
+
+static inline int onenand_block_address(int block)
+{
+	/* Device Flash Core select, NAND Flash Block Address */
+	if (block & density_mask)
+		return ONENAND_DDP_CHIP1 | (block ^ density_mask);
+
+	return block;
+}
+
+static inline int onenand_bufferram_address(int block)
+{
+	/* Device BufferRAM Select */
+	if (block & density_mask)
+		return ONENAND_DDP_CHIP1;
+
+	return ONENAND_DDP_CHIP0;
+}
+
+static inline uint16_t onenand_readw(uint32_t addr)
+{
+	return readw(CONFIG_SYS_ONENAND_BASE + addr);
+}
+
+static inline void onenand_writew(uint16_t value, uint32_t addr)
+{
+	writew(value, CONFIG_SYS_ONENAND_BASE + addr);
+}
+
+static enum onenand_spl_pagesize onenand_spl_get_geometry(void)
+{
+	unsigned int dev_id, density, size;
+
+	if (!onenand_readw(ONENAND_REG_TECHNOLOGY)) {
+		dev_id = onenand_readw(ONENAND_REG_DEVICE_ID);
+		density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+		density &= ONENAND_DEVICE_DENSITY_MASK;
+
+		if (density < ONENAND_DEVICE_DENSITY_4Gb)
+			return PAGE_2K;
+
+		if (dev_id & ONENAND_DEVICE_IS_DDP) {
+			size = onenand_readw(ONENAND_REG_DATA_BUFFER_SIZE);
+			density_mask = 1 << (18 + density - ffs(size));
+			return PAGE_2K;
+		}
+	}
+
+	return PAGE_4K;
+}
+
+static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf,
+					enum onenand_spl_pagesize pagesize)
+{
+	const uint32_t addr = CONFIG_SYS_ONENAND_BASE + ONENAND_DATARAM;
+	uint32_t offset;
+
+	onenand_writew(onenand_block_address(block),
+			ONENAND_REG_START_ADDRESS1);
+
+	onenand_writew(onenand_bufferram_address(block),
+			ONENAND_REG_START_ADDRESS2);
+
+	onenand_writew(onenand_sector_address(page),
+			ONENAND_REG_START_ADDRESS8);
+
+	onenand_writew(onenand_buffer_address(),
+			ONENAND_REG_START_BUFFER);
+
+	onenand_writew(ONENAND_INT_CLEAR, ONENAND_REG_INTERRUPT);
+
+	onenand_writew(ONENAND_CMD_READ, ONENAND_REG_COMMAND);
+
+	while (!(onenand_readw(ONENAND_REG_INTERRUPT) & ONENAND_INT_READ))
+		continue;
+
+	/* Check for invalid block mark */
+	if (page < 2 && (onenand_readw(ONENAND_SPARERAM) != 0xffff))
+		return 1;
+
+	for (offset = 0; offset < pagesize; offset += 4)
+		buf[offset / 4] = readl(addr + offset);
+
+	return 0;
+}
+
+#ifdef CONFIG_SPL_UBI
+/* Temporary storage for non page aligned and non page sized reads. */
+static u8 scratch_buf[PAGE_4K];
+
+/**
+ * onenand_spl_read_block - Read data from physical eraseblock into a buffer
+ * @block:	Number of the physical eraseblock
+ * @offset:	Data offset from the start of @peb
+ * @len:	Data size to read
+ * @dst:	Address of the destination buffer
+ *
+ * Notes:
+ *	@offset + @len are not allowed to be larger than a physical
+ *	erase block. No sanity check done for simplicity reasons.
+ */
+int onenand_spl_read_block(int block, int offset, int len, void *dst)
+{
+	int page, read;
+	static int psize;
+
+	if (!psize)
+		psize = onenand_spl_get_geometry();
+
+	/* Calculate the page number */
+	page = offset / psize;
+	/* Offset to the start of a flash page */
+	offset = offset % psize;
+
+	while (len) {
+		/*
+		 * Non page aligned reads go to the scratch buffer.
+		 * Page aligned reads go directly to the destination.
+		 */
+		if (offset || len < psize) {
+			onenand_spl_read_page(block, page,
+			                      (uint32_t *)scratch_buf, psize);
+			read = min(len, psize - offset);
+			memcpy(dst, scratch_buf + offset, read);
+			offset = 0;
+		} else {
+			onenand_spl_read_page(block, page, dst, psize);
+			read = psize;
+		}
+		page++;
+		len -= read;
+		dst += read;
+	}
+	return 0;
+}
+#endif
+
+void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst)
+{
+	uint32_t *addr = (uint32_t *)dst;
+	uint32_t to_page;
+	uint32_t block;
+	uint32_t page, rpage;
+	enum onenand_spl_pagesize pagesize;
+	int ret;
+
+	pagesize = onenand_spl_get_geometry();
+
+	/*
+	 * The page can be either 2k or 4k, avoid using DIV_ROUND_UP to avoid
+	 * pulling further unwanted functions into the SPL.
+	 */
+	if (pagesize == 2048) {
+		page = offs / 2048;
+		to_page = page + DIV_ROUND_UP(size, 2048);
+	} else {
+		page = offs / 4096;
+		to_page = page + DIV_ROUND_UP(size, 4096);
+	}
+
+	for (; page <= to_page; page++) {
+		block = page / ONENAND_PAGES_PER_BLOCK;
+		rpage = page & (ONENAND_PAGES_PER_BLOCK - 1);
+		ret = onenand_spl_read_page(block, rpage, addr, pagesize);
+		if (ret)
+			page += ONENAND_PAGES_PER_BLOCK - 1;
+		else
+			addr += pagesize / 4;
+	}
+}
diff --git a/roms/u-boot/drivers/mtd/onenand/onenand_uboot.c b/roms/u-boot/drivers/mtd/onenand/onenand_uboot.c
new file mode 100644
index 000000000..6893394e0
--- /dev/null
+++ b/roms/u-boot/drivers/mtd/onenand/onenand_uboot.c
@@ -0,0 +1,56 @@
+/*
+ *  drivers/mtd/onenand/onenand_uboot.c
+ *
+ *  Copyright (C) 2005-2008 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * OneNAND initialization at U-Boot
+ */
+
+#include <common.h>
+#include <linux/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+struct mtd_info onenand_mtd;
+struct onenand_chip onenand_chip;
+static __attribute__((unused)) char dev_name[] = "onenand0";
+
+void onenand_init(void)
+{
+	int err = 0;
+	memset(&onenand_mtd, 0, sizeof(struct mtd_info));
+	memset(&onenand_chip, 0, sizeof(struct onenand_chip));
+
+	onenand_mtd.priv = &onenand_chip;
+
+#ifdef CONFIG_USE_ONENAND_BOARD_INIT
+	/* It's used for some board init required */
+	err = onenand_board_init(&onenand_mtd);
+#else
+	onenand_chip.base = (void *) CONFIG_SYS_ONENAND_BASE;
+#endif
+
+	if (!err && !(onenand_scan(&onenand_mtd, 1))) {
+
+		if (onenand_chip.device_id & DEVICE_IS_FLEXONENAND)
+			puts("Flex-");
+		puts("OneNAND: ");
+
+#ifdef CONFIG_MTD
+		/*
+		 * Add MTD device so that we can reference it later
+		 * via the mtdcore infrastructure (e.g. ubi).
+		 */
+		onenand_mtd.name = dev_name;
+		add_mtd_device(&onenand_mtd);
+#endif
+	}
+	print_size(onenand_chip.chipsize, "\n");
+}
diff --git a/roms/u-boot/drivers/mtd/onenand/samsung.c b/roms/u-boot/drivers/mtd/onenand/samsung.c
new file mode 100644
index 000000000..657abaab8
--- /dev/null
+++ b/roms/u-boot/drivers/mtd/onenand/samsung.c
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * S5PC100 OneNAND driver at U-Boot
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Implementation:
+ *	Emulate the pseudo BufferRAM
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <linux/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/samsung_onenand.h>
+
+#include <asm/io.h>
+#include <linux/errno.h>
+
+#define ONENAND_ERASE_STATUS		0x00
+#define ONENAND_MULTI_ERASE_SET		0x01
+#define ONENAND_ERASE_START		0x03
+#define ONENAND_UNLOCK_START		0x08
+#define ONENAND_UNLOCK_END		0x09
+#define ONENAND_LOCK_START		0x0A
+#define ONENAND_LOCK_END		0x0B
+#define ONENAND_LOCK_TIGHT_START	0x0C
+#define ONENAND_LOCK_TIGHT_END		0x0D
+#define ONENAND_UNLOCK_ALL		0x0E
+#define ONENAND_OTP_ACCESS		0x12
+#define ONENAND_SPARE_ACCESS_ONLY	0x13
+#define ONENAND_MAIN_ACCESS_ONLY	0x14
+#define ONENAND_ERASE_VERIFY		0x15
+#define ONENAND_MAIN_SPARE_ACCESS	0x16
+#define ONENAND_PIPELINE_READ		0x4000
+
+#if defined(CONFIG_S5P)
+#define MAP_00				(0x0 << 26)
+#define MAP_01				(0x1 << 26)
+#define MAP_10				(0x2 << 26)
+#define MAP_11				(0x3 << 26)
+#endif
+
+/* read/write of XIP buffer */
+#define CMD_MAP_00(mem_addr)		(MAP_00 | ((mem_addr) << 1))
+/* read/write to the memory device */
+#define CMD_MAP_01(mem_addr)		(MAP_01 | (mem_addr))
+/* control special functions of the memory device */
+#define CMD_MAP_10(mem_addr)		(MAP_10 | (mem_addr))
+/* direct interface(direct access) with the memory device */
+#define CMD_MAP_11(mem_addr)		(MAP_11 | ((mem_addr) << 2))
+
+struct s3c_onenand {
+	struct mtd_info	*mtd;
+	void __iomem	*base;
+	void __iomem	*ahb_addr;
+	int		bootram_command;
+	void __iomem	*page_buf;
+	void __iomem	*oob_buf;
+	unsigned int	(*mem_addr)(int fba, int fpa, int fsa);
+	struct samsung_onenand *reg;
+};
+
+static struct s3c_onenand *onenand;
+
+static int s3c_read_cmd(unsigned int cmd)
+{
+	return readl(onenand->ahb_addr + cmd);
+}
+
+static void s3c_write_cmd(int value, unsigned int cmd)
+{
+	writel(value, onenand->ahb_addr + cmd);
+}
+
+/*
+ * MEM_ADDR
+ *
+ * fba: flash block address
+ * fpa: flash page address
+ * fsa: flash sector address
+ *
+ * return the buffer address on the memory device
+ * It will be combined with CMD_MAP_XX
+ */
+#if defined(CONFIG_S5P)
+static unsigned int s3c_mem_addr(int fba, int fpa, int fsa)
+{
+	return (fba << 13) | (fpa << 7) | (fsa << 5);
+}
+#endif
+
+static void s3c_onenand_reset(void)
+{
+	unsigned long timeout = 0x10000;
+	int stat;
+
+	writel(ONENAND_MEM_RESET_COLD, &onenand->reg->mem_reset);
+	while (timeout--) {
+		stat = readl(&onenand->reg->int_err_stat);
+		if (stat & RST_CMP)
+			break;
+	}
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	/* Clear interrupt */
+	writel(0x0, &onenand->reg->int_err_ack);
+	/* Clear the ECC status */
+	writel(0x0, &onenand->reg->ecc_err_stat);
+}
+
+static unsigned short s3c_onenand_readw(void __iomem *addr)
+{
+	struct onenand_chip *this = onenand->mtd->priv;
+	int reg = addr - this->base;
+	int word_addr = reg >> 1;
+	int value;
+
+	/* It's used for probing time */
+	switch (reg) {
+	case ONENAND_REG_MANUFACTURER_ID:
+		return readl(&onenand->reg->manufact_id);
+	case ONENAND_REG_DEVICE_ID:
+		return readl(&onenand->reg->device_id);
+	case ONENAND_REG_VERSION_ID:
+		return readl(&onenand->reg->flash_ver_id);
+	case ONENAND_REG_DATA_BUFFER_SIZE:
+		return readl(&onenand->reg->data_buf_size);
+	case ONENAND_REG_TECHNOLOGY:
+		return readl(&onenand->reg->tech);
+	case ONENAND_REG_SYS_CFG1:
+		return readl(&onenand->reg->mem_cfg);
+
+	/* Used at unlock all status */
+	case ONENAND_REG_CTRL_STATUS:
+		return 0;
+
+	case ONENAND_REG_WP_STATUS:
+		return ONENAND_WP_US;
+
+	default:
+		break;
+	}
+
+	/* BootRAM access control */
+	if (reg < ONENAND_DATARAM && onenand->bootram_command) {
+		if (word_addr == 0)
+			return readl(&onenand->reg->manufact_id);
+		if (word_addr == 1)
+			return readl(&onenand->reg->device_id);
+		if (word_addr == 2)
+			return readl(&onenand->reg->flash_ver_id);
+	}
+
+	value = s3c_read_cmd(CMD_MAP_11(word_addr)) & 0xffff;
+	printk(KERN_INFO "s3c_onenand_readw:  Illegal access"
+		" at reg 0x%x, value 0x%x\n", word_addr, value);
+	return value;
+}
+
+static void s3c_onenand_writew(unsigned short value, void __iomem *addr)
+{
+	struct onenand_chip *this = onenand->mtd->priv;
+	int reg = addr - this->base;
+	int word_addr = reg >> 1;
+
+	/* It's used for probing time */
+	switch (reg) {
+	case ONENAND_REG_SYS_CFG1:
+		writel(value, &onenand->reg->mem_cfg);
+		return;
+
+	case ONENAND_REG_START_ADDRESS1:
+	case ONENAND_REG_START_ADDRESS2:
+		return;
+
+	/* Lock/lock-tight/unlock/unlock_all */
+	case ONENAND_REG_START_BLOCK_ADDRESS:
+		return;
+
+	default:
+		break;
+	}
+
+	/* BootRAM access control */
+	if (reg < ONENAND_DATARAM) {
+		if (value == ONENAND_CMD_READID) {
+			onenand->bootram_command = 1;
+			return;
+		}
+		if (value == ONENAND_CMD_RESET) {
+			writel(ONENAND_MEM_RESET_COLD,
+					&onenand->reg->mem_reset);
+			onenand->bootram_command = 0;
+			return;
+		}
+	}
+
+	printk(KERN_INFO "s3c_onenand_writew: Illegal access"
+		" at reg 0x%x, value 0x%x\n", word_addr, value);
+
+	s3c_write_cmd(value, CMD_MAP_11(word_addr));
+}
+
+static int s3c_onenand_wait(struct mtd_info *mtd, int state)
+{
+	unsigned int flags = INT_ACT;
+	unsigned int stat, ecc;
+	unsigned long timeout = 0x100000;
+
+	switch (state) {
+	case FL_READING:
+		flags |= BLK_RW_CMP | LOAD_CMP;
+		break;
+	case FL_WRITING:
+		flags |= BLK_RW_CMP | PGM_CMP;
+		break;
+	case FL_ERASING:
+		flags |= BLK_RW_CMP | ERS_CMP;
+		break;
+	case FL_LOCKING:
+		flags |= BLK_RW_CMP;
+		break;
+	default:
+		break;
+	}
+
+	while (timeout--) {
+		stat = readl(&onenand->reg->int_err_stat);
+		if (stat & flags)
+			break;
+	}
+
+	/* To get correct interrupt status in timeout case */
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	/*
+	 * In the Spec. it checks the controller status first
+	 * However if you get the correct information in case of
+	 * power off recovery (POR) test, it should read ECC status first
+	 */
+	if (stat & LOAD_CMP) {
+		ecc = readl(&onenand->reg->ecc_err_stat);
+		if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) {
+			printk(KERN_INFO "%s: ECC error = 0x%04x\n",
+					__func__, ecc);
+			mtd->ecc_stats.failed++;
+			return -EBADMSG;
+		}
+	}
+
+	if (stat & (LOCKED_BLK | ERS_FAIL | PGM_FAIL | LD_FAIL_ECC_ERR)) {
+		printk(KERN_INFO "%s: controller error = 0x%04x\n",
+				__func__, stat);
+		if (stat & LOCKED_BLK)
+			printk(KERN_INFO "%s: it's locked error = 0x%04x\n",
+					__func__, stat);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int s3c_onenand_command(struct mtd_info *mtd, int cmd,
+		loff_t addr, size_t len)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int *m, *s;
+	int fba, fpa, fsa = 0;
+	unsigned int mem_addr;
+	int i, mcount, scount;
+	int index;
+
+	fba = (int) (addr >> this->erase_shift);
+	fpa = (int) (addr >> this->page_shift);
+	fpa &= this->page_mask;
+
+	mem_addr = onenand->mem_addr(fba, fpa, fsa);
+
+	switch (cmd) {
+	case ONENAND_CMD_READ:
+	case ONENAND_CMD_READOOB:
+	case ONENAND_CMD_BUFFERRAM:
+		ONENAND_SET_NEXT_BUFFERRAM(this);
+	default:
+		break;
+	}
+
+	index = ONENAND_CURRENT_BUFFERRAM(this);
+
+	/*
+	 * Emulate Two BufferRAMs and access with 4 bytes pointer
+	 */
+	m = (unsigned int *) onenand->page_buf;
+	s = (unsigned int *) onenand->oob_buf;
+
+	if (index) {
+		m += (this->writesize >> 2);
+		s += (mtd->oobsize >> 2);
+	}
+
+	mcount = mtd->writesize >> 2;
+	scount = mtd->oobsize >> 2;
+
+	switch (cmd) {
+	case ONENAND_CMD_READ:
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			*m++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_READOOB:
+		writel(TSRF, &onenand->reg->trans_spare);
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			*m++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+
+		/* Spare */
+		for (i = 0; i < scount; i++)
+			*s++ = s3c_read_cmd(CMD_MAP_01(mem_addr));
+
+		writel(0, &onenand->reg->trans_spare);
+		return 0;
+
+	case ONENAND_CMD_PROG:
+		/* Main */
+		for (i = 0; i < mcount; i++)
+			s3c_write_cmd(*m++, CMD_MAP_01(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_PROGOOB:
+		writel(TSRF, &onenand->reg->trans_spare);
+
+		/* Main - dummy write */
+		for (i = 0; i < mcount; i++)
+			s3c_write_cmd(0xffffffff, CMD_MAP_01(mem_addr));
+
+		/* Spare */
+		for (i = 0; i < scount; i++)
+			s3c_write_cmd(*s++, CMD_MAP_01(mem_addr));
+
+		writel(0, &onenand->reg->trans_spare);
+		return 0;
+
+	case ONENAND_CMD_UNLOCK_ALL:
+		s3c_write_cmd(ONENAND_UNLOCK_ALL, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_ERASE:
+		s3c_write_cmd(ONENAND_ERASE_START, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_MULTIBLOCK_ERASE:
+		s3c_write_cmd(ONENAND_MULTI_ERASE_SET, CMD_MAP_10(mem_addr));
+		return 0;
+
+	case ONENAND_CMD_ERASE_VERIFY:
+		s3c_write_cmd(ONENAND_ERASE_VERIFY, CMD_MAP_10(mem_addr));
+		return 0;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static unsigned char *s3c_get_bufferram(struct mtd_info *mtd, int area)
+{
+	struct onenand_chip *this = mtd->priv;
+	int index = ONENAND_CURRENT_BUFFERRAM(this);
+	unsigned char *p;
+
+	if (area == ONENAND_DATARAM) {
+		p = (unsigned char *) onenand->page_buf;
+		if (index == 1)
+			p += this->writesize;
+	} else {
+		p = (unsigned char *) onenand->oob_buf;
+		if (index == 1)
+			p += mtd->oobsize;
+	}
+
+	return p;
+}
+
+static int onenand_read_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				  unsigned char *buffer, int offset,
+				  size_t count)
+{
+	unsigned char *p;
+
+	p = s3c_get_bufferram(mtd, area);
+	memcpy(buffer, p + offset, count);
+	return 0;
+}
+
+static int onenand_write_bufferram(struct mtd_info *mtd, loff_t addr, int area,
+				   const unsigned char *buffer, int offset,
+				   size_t count)
+{
+	unsigned char *p;
+
+	p = s3c_get_bufferram(mtd, area);
+	memcpy(p + offset, buffer, count);
+	return 0;
+}
+
+static int s3c_onenand_bbt_wait(struct mtd_info *mtd, int state)
+{
+	struct samsung_onenand *reg = (struct samsung_onenand *)onenand->base;
+	unsigned int flags = INT_ACT | LOAD_CMP;
+	unsigned int stat;
+	unsigned long timeout = 0x10000;
+
+	while (timeout--) {
+		stat = readl(&reg->int_err_stat);
+		if (stat & flags)
+			break;
+	}
+	/* To get correct interrupt status in timeout case */
+	stat = readl(&onenand->reg->int_err_stat);
+	writel(stat, &onenand->reg->int_err_ack);
+
+	if (stat & LD_FAIL_ECC_ERR) {
+		s3c_onenand_reset();
+		return ONENAND_BBT_READ_ERROR;
+	}
+
+	if (stat & LOAD_CMP) {
+		int ecc = readl(&onenand->reg->ecc_err_stat);
+		if (ecc & ONENAND_ECC_4BIT_UNCORRECTABLE) {
+			s3c_onenand_reset();
+			return ONENAND_BBT_READ_ERROR;
+		}
+	}
+
+	return 0;
+}
+
+static void s3c_onenand_check_lock_status(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	unsigned int block, end;
+
+	end = this->chipsize >> this->erase_shift;
+
+	for (block = 0; block < end; block++) {
+		s3c_read_cmd(CMD_MAP_01(onenand->mem_addr(block, 0, 0)));
+
+		if (readl(&onenand->reg->int_err_stat) & LOCKED_BLK) {
+			printf("block %d is write-protected!\n", block);
+			writel(LOCKED_BLK, &onenand->reg->int_err_ack);
+		}
+	}
+}
+
+static void s3c_onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs,
+		size_t len, int cmd)
+{
+	struct onenand_chip *this = mtd->priv;
+	int start, end, start_mem_addr, end_mem_addr;
+
+	start = ofs >> this->erase_shift;
+	start_mem_addr = onenand->mem_addr(start, 0, 0);
+	end = start + (len >> this->erase_shift) - 1;
+	end_mem_addr = onenand->mem_addr(end, 0, 0);
+
+	if (cmd == ONENAND_CMD_LOCK) {
+		s3c_write_cmd(ONENAND_LOCK_START, CMD_MAP_10(start_mem_addr));
+		s3c_write_cmd(ONENAND_LOCK_END, CMD_MAP_10(end_mem_addr));
+	} else {
+		s3c_write_cmd(ONENAND_UNLOCK_START, CMD_MAP_10(start_mem_addr));
+		s3c_write_cmd(ONENAND_UNLOCK_END, CMD_MAP_10(end_mem_addr));
+	}
+
+	this->wait(mtd, FL_LOCKING);
+}
+
+static void s3c_onenand_unlock_all(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	loff_t ofs = 0;
+	size_t len = this->chipsize;
+
+	/* FIXME workaround */
+	this->subpagesize = mtd->writesize;
+	mtd->subpage_sft = 0;
+
+	if (this->options & ONENAND_HAS_UNLOCK_ALL) {
+		/* Write unlock command */
+		this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
+
+		/* No need to check return value */
+		this->wait(mtd, FL_LOCKING);
+
+		/* Workaround for all block unlock in DDP */
+		if (!ONENAND_IS_DDP(this)) {
+			s3c_onenand_check_lock_status(mtd);
+			return;
+		}
+
+		/* All blocks on another chip */
+		ofs = this->chipsize >> 1;
+		len = this->chipsize >> 1;
+	}
+
+	s3c_onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
+	s3c_onenand_check_lock_status(mtd);
+}
+
+int s5pc110_chip_probe(struct mtd_info *mtd)
+{
+	return 0;
+}
+
+int s5pc210_chip_probe(struct mtd_info *mtd)
+{
+	return 0;
+}
+
+void s3c_onenand_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	u32 size = (4 << 10);	/* 4 KiB */
+
+	onenand = malloc(sizeof(struct s3c_onenand));
+	if (!onenand)
+		return;
+
+	onenand->page_buf = malloc(size * sizeof(char));
+	if (!onenand->page_buf)
+		return;
+	memset(onenand->page_buf, 0xff, size);
+
+	onenand->oob_buf = malloc(128 * sizeof(char));
+	if (!onenand->oob_buf)
+		return;
+	memset(onenand->oob_buf, 0xff, 128);
+
+	onenand->mtd = mtd;
+
+#if defined(CONFIG_S5P)
+	onenand->base = (void *)0xE7100000;
+	onenand->ahb_addr = (void *)0xB0000000;
+#endif
+	onenand->mem_addr = s3c_mem_addr;
+	onenand->reg = (struct samsung_onenand *)onenand->base;
+
+	this->read_word = s3c_onenand_readw;
+	this->write_word = s3c_onenand_writew;
+
+	this->wait = s3c_onenand_wait;
+	this->bbt_wait = s3c_onenand_bbt_wait;
+	this->unlock_all = s3c_onenand_unlock_all;
+	this->command = s3c_onenand_command;
+
+	this->read_bufferram = onenand_read_bufferram;
+	this->write_bufferram = onenand_write_bufferram;
+
+	this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK;
+}