Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 155 insertions, 0 deletions

diff --git a/roms/u-boot/drivers/pci/pcie_dw_common.h b/roms/u-boot/drivers/pci/pcie_dw_common.h
new file mode 100644
index 000000000..6b701645a
--- /dev/null
+++ b/roms/u-boot/drivers/pci/pcie_dw_common.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2021 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2021 Rockchip, Inc.
+ *
+ * Copyright (C) 2018 Texas Instruments, Inc
+ */
+
+#ifndef PCIE_DW_COMMON_H
+#define PCIE_DW_COMMON_H
+
+#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20)
+
+/* PCI DBICS registers */
+#define PCIE_LINK_STATUS_REG		0x80
+#define PCIE_LINK_STATUS_SPEED_OFF	16
+#define PCIE_LINK_STATUS_SPEED_MASK	(0xf << PCIE_LINK_STATUS_SPEED_OFF)
+#define PCIE_LINK_STATUS_WIDTH_OFF	20
+#define PCIE_LINK_STATUS_WIDTH_MASK	(0xf << PCIE_LINK_STATUS_WIDTH_OFF)
+
+/*
+ * iATU Unroll-specific register definitions
+ * From 4.80 core version the address translation will be made by unroll.
+ * The registers are offset from atu_base
+ */
+#define PCIE_ATU_UNR_REGION_CTRL1	0x00
+#define PCIE_ATU_UNR_REGION_CTRL2	0x04
+#define PCIE_ATU_UNR_LOWER_BASE		0x08
+#define PCIE_ATU_UNR_UPPER_BASE		0x0c
+#define PCIE_ATU_UNR_LIMIT		0x10
+#define PCIE_ATU_UNR_LOWER_TARGET	0x14
+#define PCIE_ATU_UNR_UPPER_TARGET	0x18
+
+#define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
+#define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
+#define PCIE_ATU_TYPE_MEM		(0x0 << 0)
+#define PCIE_ATU_TYPE_IO		(0x2 << 0)
+#define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
+#define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
+#define PCIE_ATU_ENABLE			(0x1 << 31)
+#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
+#define PCIE_ATU_BUS(x)			(((x) & 0xff) << 24)
+#define PCIE_ATU_DEV(x)			(((x) & 0x1f) << 19)
+#define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
+
+/* Register address builder */
+#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region)	((region) << 9)
+
+/* Parameters for the waiting for iATU enabled routine */
+#define LINK_WAIT_MAX_IATU_RETRIES	5
+#define LINK_WAIT_IATU_US		10000
+
+/* PCI DBICS registers */
+#define PCIE_LINK_STATUS_REG		0x80
+#define PCIE_LINK_STATUS_SPEED_OFF	16
+#define PCIE_LINK_STATUS_SPEED_MASK	(0xf << PCIE_LINK_STATUS_SPEED_OFF)
+#define PCIE_LINK_STATUS_WIDTH_OFF	20
+#define PCIE_LINK_STATUS_WIDTH_MASK	(0xf << PCIE_LINK_STATUS_WIDTH_OFF)
+
+#define PCIE_LINK_CAPABILITY		0x7c
+#define PCIE_LINK_CTL_2			0xa0
+#define TARGET_LINK_SPEED_MASK		0xf
+#define LINK_SPEED_GEN_1		0x1
+#define LINK_SPEED_GEN_2		0x2
+#define LINK_SPEED_GEN_3		0x3
+
+/* Synopsys-specific PCIe configuration registers */
+#define PCIE_PORT_LINK_CONTROL		0x710
+#define PORT_LINK_DLL_LINK_EN		BIT(5)
+#define PORT_LINK_FAST_LINK_MODE	BIT(7)
+#define PORT_LINK_MODE_MASK		GENMASK(21, 16)
+#define PORT_LINK_MODE(n)		FIELD_PREP(PORT_LINK_MODE_MASK, n)
+#define PORT_LINK_MODE_1_LANES		PORT_LINK_MODE(0x1)
+#define PORT_LINK_MODE_2_LANES		PORT_LINK_MODE(0x3)
+#define PORT_LINK_MODE_4_LANES		PORT_LINK_MODE(0x7)
+#define PORT_LINK_MODE_8_LANES		PORT_LINK_MODE(0xf)
+
+#define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
+#define PORT_LOGIC_N_FTS_MASK		GENMASK(7, 0)
+#define PORT_LOGIC_SPEED_CHANGE		BIT(17)
+#define PORT_LOGIC_LINK_WIDTH_MASK	GENMASK(12, 8)
+#define PORT_LOGIC_LINK_WIDTH(n)	FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n)
+#define PORT_LOGIC_LINK_WIDTH_1_LANES	PORT_LOGIC_LINK_WIDTH(0x1)
+#define PORT_LOGIC_LINK_WIDTH_2_LANES	PORT_LOGIC_LINK_WIDTH(0x2)
+#define PORT_LOGIC_LINK_WIDTH_4_LANES	PORT_LOGIC_LINK_WIDTH(0x4)
+#define PORT_LOGIC_LINK_WIDTH_8_LANES	PORT_LOGIC_LINK_WIDTH(0x8)
+
+#define PCIE_MISC_CONTROL_1_OFF		0x8bc
+#define PCIE_DBI_RO_WR_EN		BIT(0)
+
+/* Parameters for the waiting for iATU enabled routine */
+#define LINK_WAIT_MAX_IATU_RETRIES	5
+#define LINK_WAIT_IATU			10000
+
+/**
+ * struct pcie_dw - DW PCIe controller state
+ *
+ * @dbi_base: The base address of dbi register space
+ * @cfg_base: The base address of configuration space
+ * @atu_base: The base address of ATU space
+ * @cfg_size: The size of the configuration space which is needed
+ *            as it gets written into the PCIE_ATU_LIMIT register
+ * @first_busno: This driver supports multiple PCIe controllers.
+ *               first_busno stores the bus number of the PCIe root-port
+ *               number which may vary depending on the PCIe setup
+ *               (PEX switches etc).
+ * @io: The IO space for EP's BAR
+ * @mem: The memory space for EP's BAR
+ * @prefetch: The prefetch space for EP's BAR
+ */
+struct pcie_dw {
+	struct udevice	*dev;
+	void __iomem *dbi_base;
+	void __iomem *cfg_base;
+	void __iomem *atu_base;
+	fdt_size_t cfg_size;
+
+	int first_busno;
+
+	/* IO, MEM & PREFETCH PCI regions */
+	struct pci_region io;
+	struct pci_region mem;
+	struct pci_region prefetch;
+};
+
+int pcie_dw_get_link_speed(struct pcie_dw *pci);
+
+int pcie_dw_get_link_width(struct pcie_dw *pci);
+
+int pcie_dw_prog_outbound_atu_unroll(struct pcie_dw *pci, int index, int type, u64 cpu_addr,
+				     u64 pci_addr, u32 size);
+
+int pcie_dw_read_config(const struct udevice *bus, pci_dev_t bdf, uint offset, ulong *valuep,
+			enum pci_size_t size);
+
+int pcie_dw_write_config(struct udevice *bus, pci_dev_t bdf, uint offset, ulong value,
+			 enum pci_size_t size);
+
+static inline void dw_pcie_dbi_write_enable(struct pcie_dw *pci, bool en)
+{
+	u32 val;
+
+	val = readl(pci->dbi_base + PCIE_MISC_CONTROL_1_OFF);
+	if (en)
+		val |= PCIE_DBI_RO_WR_EN;
+	else
+		val &= ~PCIE_DBI_RO_WR_EN;
+	writel(val, pci->dbi_base + PCIE_MISC_CONTROL_1_OFF);
+}
+
+void pcie_dw_setup_host(struct pcie_dw *pci);
+
+#endif