Add submodule dependency filesHEADmaster

Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec

1 files changed, 174 insertions, 0 deletions

diff --git a/roms/u-boot/drivers/usb/host/ehci-mxs.c b/roms/u-boot/drivers/usb/host/ehci-mxs.c
new file mode 100644
index 000000000..824c620e6
--- /dev/null
+++ b/roms/u-boot/drivers/usb/host/ehci-mxs.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Freescale i.MX28 USB Host driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <errno.h>
+#include <linux/delay.h>
+
+#include "ehci.h"
+
+/* This DIGCTL register ungates clock to USB */
+#define	HW_DIGCTL_CTRL			0x8001c000
+#define	HW_DIGCTL_CTRL_USB0_CLKGATE	(1 << 2)
+#define	HW_DIGCTL_CTRL_USB1_CLKGATE	(1 << 16)
+
+struct ehci_mxs_port {
+	uint32_t		usb_regs;
+	struct mxs_usbphy_regs	*phy_regs;
+
+	struct mxs_register_32	*pll;
+	uint32_t		pll_en_bits;
+	uint32_t		pll_dis_bits;
+	uint32_t		gate_bits;
+};
+
+static const struct ehci_mxs_port mxs_port[] = {
+#ifdef CONFIG_EHCI_MXS_PORT0
+	{
+		MXS_USBCTRL0_BASE,
+		(struct mxs_usbphy_regs *)MXS_USBPHY0_BASE,
+		(struct mxs_register_32 *)(MXS_CLKCTRL_BASE +
+			offsetof(struct mxs_clkctrl_regs,
+			hw_clkctrl_pll0ctrl0_reg)),
+		CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER,
+		CLKCTRL_PLL0CTRL0_EN_USB_CLKS,
+		HW_DIGCTL_CTRL_USB0_CLKGATE,
+	},
+#endif
+#ifdef CONFIG_EHCI_MXS_PORT1
+	{
+		MXS_USBCTRL1_BASE,
+		(struct mxs_usbphy_regs *)MXS_USBPHY1_BASE,
+		(struct mxs_register_32 *)(MXS_CLKCTRL_BASE +
+			offsetof(struct mxs_clkctrl_regs,
+			hw_clkctrl_pll1ctrl0_reg)),
+		CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER,
+		CLKCTRL_PLL1CTRL0_EN_USB_CLKS,
+		HW_DIGCTL_CTRL_USB1_CLKGATE,
+	},
+#endif
+};
+
+static int ehci_mxs_toggle_clock(const struct ehci_mxs_port *port, int enable)
+{
+	struct mxs_register_32 *digctl_ctrl =
+		(struct mxs_register_32 *)HW_DIGCTL_CTRL;
+	int pll_offset, dig_offset;
+
+	if (enable) {
+		pll_offset = offsetof(struct mxs_register_32, reg_set);
+		dig_offset = offsetof(struct mxs_register_32, reg_clr);
+		writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset);
+		writel(port->pll_en_bits, (u32)port->pll + pll_offset);
+	} else {
+		pll_offset = offsetof(struct mxs_register_32, reg_clr);
+		dig_offset = offsetof(struct mxs_register_32, reg_set);
+		writel(port->pll_dis_bits, (u32)port->pll + pll_offset);
+		writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset);
+	}
+
+	return 0;
+}
+
+int __weak board_ehci_hcd_init(int port)
+{
+	return 0;
+}
+
+int __weak board_ehci_hcd_exit(int port)
+{
+	return 0;
+}
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+
+	int ret;
+	uint32_t usb_base, cap_base;
+	const struct ehci_mxs_port *port;
+
+	if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) {
+		printf("Invalid port index (index = %d)!\n", index);
+		return -EINVAL;
+	}
+
+	ret = board_ehci_hcd_init(index);
+	if (ret)
+		return ret;
+
+	port = &mxs_port[index];
+
+	/* Reset the PHY block */
+	writel(USBPHY_CTRL_SFTRST, &port->phy_regs->hw_usbphy_ctrl_set);
+	udelay(10);
+	writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE,
+		&port->phy_regs->hw_usbphy_ctrl_clr);
+
+	/* Enable USB clock */
+	ret = ehci_mxs_toggle_clock(port, 1);
+	if (ret)
+		return ret;
+
+	/* Start USB PHY */
+	writel(0, &port->phy_regs->hw_usbphy_pwd);
+
+	/* Enable UTMI+ Level 2 and Level 3 compatibility */
+	writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1,
+		&port->phy_regs->hw_usbphy_ctrl_set);
+
+	usb_base = port->usb_regs + 0x100;
+	*hccr = (struct ehci_hccr *)usb_base;
+
+	cap_base = ehci_readl(&(*hccr)->cr_capbase);
+	*hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base));
+
+	return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+	int ret;
+	uint32_t usb_base, cap_base, tmp;
+	struct ehci_hccr *hccr;
+	struct ehci_hcor *hcor;
+	const struct ehci_mxs_port *port;
+
+	if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) {
+		printf("Invalid port index (index = %d)!\n", index);
+		return -EINVAL;
+	}
+
+	port = &mxs_port[index];
+
+	/* Stop the USB port */
+	usb_base = port->usb_regs + 0x100;
+	hccr = (struct ehci_hccr *)usb_base;
+	cap_base = ehci_readl(&hccr->cr_capbase);
+	hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base));
+
+	tmp = ehci_readl(&hcor->or_usbcmd);
+	tmp &= ~CMD_RUN;
+	ehci_writel(&hcor->or_usbcmd, tmp);
+
+	/* Disable the PHY */
+	tmp = USBPHY_PWD_RXPWDRX | USBPHY_PWD_RXPWDDIFF |
+		USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV |
+		USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS |
+		USBPHY_PWD_TXPWDFS;
+	writel(tmp, &port->phy_regs->hw_usbphy_pwd);
+
+	/* Disable USB clock */
+	ret = ehci_mxs_toggle_clock(port, 0);
+
+	board_ehci_hcd_exit(index);
+
+	return ret;
+}